Google
 

Trailing-Edge - PDP-10 Archives - decus_20tap1_198111 - decus/20-0000/conversion-status.rno
There are 10 other files named conversion-status.rno in the archive. Click here to see a list.
00100	.nj;.ap;.ps 60,65
00200	Conversion Status [2 Feb 81]/HDT
00300	.s 1
00400	.center;DECsystem-10/DECSYSTEM-20
00500	.center;DECUS Library Program Conversion
00600	.s 1
00700	.center;Report of Disposition of Programs 
00800	.center;by DEC-10 Catalog Number
00900		The following list describes the status of the programs in
01000	the DECUS DECsystem-10 Program Library as they were converted to the
01100	DECUS DECSYSTEM-20 Program Library.  An attempt was made to compile,
01200	load, and verify that execution begins for each of the packages as
01300	noted, except that packages using DECtapes or papertapes were
01400	deleted immediately since they are not supported on the DEC-20.
01500	The term "runs successfully", as used below, indicates that the 
01600	program did at least begin execution and may have run to completion
01700	but that no test data were available for verification of the
01800	accuracy of the results.  The term "runs correctly" indicates that
01900	the program ran a supplied test set correctly (as verified by the
02000	documentation supplied with the program) or correctly executed with
02100	an obvious test case.
02200	.s 1
02300	.lm 20;.ts 10,20
02400	.TP 4;.I -20;"10"	"20"
02500	.TP 4;.I -20;Number	Number	Disposition/Status
02600	.s 1
02700	.TP 4;.I -20;3	-	DTLOTS
02800	.br;Deleted: DECtape utility not useful on "20"
02900	.s 1;.TP 4;.I -20;6	-	Scholar/Teach
03000	.br;Deleted: some I/O routines are supplied as F40 .REL files (no
03100	source) and cannot be used on the "20".
03200	.s 1;.TP 4;.I -20;8	-	DECtape DDT
03300	.br;Deleted: DECtape utility not useful on "20".
03400	.s 1;.TP 4;.I -20;9	-	MUSIC
03500	.br;Deleted: Designed to be an executive-mode program, which cannot
03600	be run on the "20".
03700	.s 1;.TP 4;.I -20;10	-	EIGHT and EDIT8
03800	.br;Deleted: DECtape utility not useful on "20".
03900	.s 1;.TP 4;.I -20;12	0005	PAL-10
04000	.br;Minor modification required in logical name list; compiles,
04100	loads, and runs successfully.
04200	.s 1;.TP 4;.I -20;15	-	FAIL
04300	.br;See 10-86 (FAIL/SAIL).
04400	.s 1;.TP 4;.I -20;22	0006	JACOBI
04500	.br;Converted subroutine calls to PUSHJ/POPJ; now compiles correctly.
04600	Execution testing not done.
04700	.s 1;.TP 4;.I -20;23	0007	SPEEDY (PDP-10/8 Loader)
04800	.br;Loader appears to run from a load of the .REL file (no testing
04900	done).  Source file is garbled and cannot be used to generate the
05000	_.REL file.
05100	.s 1;.TP 4;.I -20;25	-	ONCE
05200	.br;Deleted: Specific to TOPS-10.
05300	.s 1;.TP 4;.I -20;27	0008	GASP II
05400	.br;Compiles and loads cleanly.  No further testing done.
05500	.s 1;.TP 4;.I -20;28	-	SIM-11
05600	.br;Deleted: Converted the .SAV file to .EXE and program appears to run.
05700	But attempt to reload from source files did not work - appears to enter
05800	loop during program execution. Needs work to correct source files.
05900	.s 1;.TP 4;.I -20;29	-	PDP-8/10 Real-Time System
06000	.br;Deleted: TOPS-10 specific.
06100	.s 1;.TP 4;.I -20;30	0009	NVERTX
06200	.br;Compiles with some warning messages, loads, and runs to completion
06300	with the test data supplied.
06400	.s 1;.TP 4;.I -20;31	0010	PALX-11
06500	.br;Compiles, loads, and begins execution.  No testing done.
06600	.s 1;.TP 4;.I -20;33	0011	W
06700	.br;Converted octal constants to form required by FORTRAN-20;
06800	program compiles and runs.
06900	.s 1;.TP 4;.I -20;34	-	ECAP
07000	.br;See the WMU library for a functioning version of ECAP.
07100	.s 1;.TP 4;.I -20;36	-	ARP
07200	.br;Deleted:  JSA/JRA subroutine calls, incomplete source files,
07300	numerous compilation errors.  Appears to be beyond recovery.
07400	.s 1;.TP 4;.I -20;37	-	TRACE
07500	.br;Deleted: requires ARP.  (The two subroutines in TRACE compiled
07600	cleanly, however.)
07700	.s 1;.TP 4;.I -20;38	0012	FLOW CHARTER
07800	.br;Compiles, loads, and runs successfully.
07900	.s 1;.TP 4;.I -20;43	0013	RANDOM NUMBERS
08000	.br;Converted subroutine calls to PUSHJ/POPJ; programs now compile,
08100	load, and run successfully.    Results not checked for accuracy.
08200	.s 1;.TP 4;.I -20;57	0014	SIMPLE
08300	.br;Converted subroutine calls to PUSHJ/POPJ; programs now compile,
08400	load, and correctly run the test data supplied with the programs.
08500	.s 1;.TP 4;.I -20;59	0015	LISP 1.6
08600	.br;Redefined JOBDAT symbols and replaced one outdated JSYS.
08700	Some possible problems with source file ALVINE.MAC (HRRZ@ opcodes).
08800	No testing done on this package.
08900	.s 1;.TP 4;.I -20;61	0016	MLISP
09000	.br;No modifications required.  Package is expected to be a 
09100	transportable LISP package, but no testing was done.
09200	.s 1;.TP 4;.I -20;65	0017	LEARNS
09300	.br;Program compiles, loads, and runs successfully.
09400	.s 1;.TP 4;.I -20;68	0018	PAL-12
09500	.br;Modified logical name search; program compiles, loads, and
09600	successfully executes two test programs supplied.
09700	.s 1;.TP 4;.I -20;70	0019	FAKE
09800	.br;Converted subroutine calls to PUSHJ/POPJ and redefined JOBDAT
09900	symbols.  Program assembles; no testing done.
10000	.s 1;.TP 4;.I -20;72	0020	DARTMOUTH BASIC LIBRARY
10100	.br;Random sample of programs tested appear to function correctly.
10200	.s 1;.TP 4;.I -20;86	0002	SAIL/FAIL
10300	.br;Original DEC-10 version has been supplemented by some routines
10400	supplied by Charles Hedrick of Rutgers which fix bugs on the DEC-20.
10500	Program appears to compile correctly.
10600	.s 1;.TP 4;.I -20;87	-	MATRIX
10700	.br;Deleted: Source files are missing and supplied .REL file for
10800	FREEST is from F40 (not usable).
10900	.s 1;.TP 4;.I -20;88	0021	SALESMAN
11000	.br;Program compiles and runs successfully.
11100	.s 1;.TP 4;.I -20;89	0022	JOTTO
11200	.br;Typographical errors were corrected.  Program compiles but needs
11300	a dictionary.
11400	.s 1;.TP 4;.I -20;90	0023	BARTEE
11500	.br;Redefined JOBDAT symbols; program compiles,loads, and correctly
11600	executes test data given in .DOC file.
11700	.s 1;.TP 4;.I -20;93	-	BCDPIP
11800	.br;Deleted: Program will not take 1600 bpi tapes,
11900	there are few IBM 7040 tapes to convert any longer, and other
12000	alternatives (e.g., CHANGE) exist.  
12100	.s 1;.TP 4;.I -20;97	0024	BASIC TUTORIAL
12200	.br;A random sample of programs tested functioned correctly.
12300	.s 1;.TP 4;.I -20;98	-	PUNCH
12400	.br;Deleted: No papertape punch on the "20".
12500	.s 1;.TP 4;.I -20;100	0025	ONLINE BASIC AND FORTRAN DEMOS
12600	.br;A random sample of the BASIC programs ran.  FORTRAN files which
12700	did not run were modified for FORTRAN-20 compatibility.  Files were
12800	given filetypes .BAS, .FOR, and .TXT, depending upon their
12900	functions.  Calling sequence of RAND.MAC was converted to PUSHJ/POPJ.
13000	.s 1;.TP 4;.I -20;101	0026	SSP
13100	.br;Programs ran without modification and gave results in agreement
13200	with expected test results to within 5 to 7 significant figures.
13300	.s 1;.TP 4;.I -20;102	0027	PDP-8 SIMULATOR
13400	.br;Converted JOBDAT symbols; compiles, loads, and runs successfully.
13600	.s 1;.TP 4;.I -20;103	-	RESDEC
13700	.br;Deleted: requires DECtape drives.
13800	.s 1;.TP 4;.I -20;104	0028	SNOBOL4
13900	.br;Converted .SHR to .EXE file;  the .EXE file runs.  No attempt to
14000	recompile and reload (which should be done).
14100	.s 1;.TP 4;.I -20;105	0029	DOCTOR AND ELIZA
14200	.br;Converted .SAV to .EXE file, which functions correctly.
14300	No source file is included.
14400	.s 1;.TP 4;.I -20;107	-	CFILE
14500	.br;Deleted:  program doesn't function correctly and duplicates
14600	functions of the executive TAKE command on the "20".
14700	.s 1;.TP 4;.I -20;110	0030	CHESS
14800	.br;Converted .SAV file to .EXE file, which functions correctly.
14900	No source file is included.
15000	.s 1;.TP 4;.I -20;112	-	GOOF
15100	.br;Deleted:  requires DECtape drives.
15200	.s 1;.TP 4;.I -20;113	-	MULPAC
15300	.br;Deleted: These programs require extensive modification for the
15400	"20" because of the standard use of JSA/JRA calling sequence and the
15500	strong interrelation between different MACRO modules of the code.
15600	.s 1;.TP 4;.I -20;114	0031	MATTAC
15700	.br;Converted .SAV file to .EXE file, which runs.
15800	.s 1;.TP 4;.I -20;115	0032	TAPBLK
15900	.br;Converted .SAV file to .EXE file, which begins execution.  Did
16000	not test.
16100	.s 1;.TP 4;.I -20;116	0033	QED
16200	.br;Redefined JOBDAT symbols. Program compiles, loads, and 
16300	executes.
16400	.s 1;.TP 4;.I -20;117	-	IFTYP
16500	.br;Deleted:  uses F40 LUUO's.
16600	.s 1;.TP 4;.I -20;120	-	DYNAM
16700	.br;Deleted: virtual memory capability of TOPS-20 makes this of
16800	little use.
16900	.s 1;.TP 4;.I -20;121	-	CUSPER
17000	.br;Deleted: uses F40 conventions for argument counting which are
17100	difficult to convert.
17200	.s 1;.TP 4;.I -20;122	-	CSMP-10
17300	.br;Deleted: Use the version of CSMP from the WMU library instead.
17400	.s 1;.TP 4;.I -20;126	-	TAPTST
17500	.br;Deleted: Designed to work with DEC-10 magnetic tapes (556 bpi).
17600	.s 1;.TP 4;.I -20;127	-	PCPY
17700	.br;Deleted: Specific to TOPS-10.
17800	.s 1;.TP 4;.I -20;130	0034	RENMBR
17900	.br;Compiles, loads, and runs successfully.
18000	The .CMD file was modified for TOPS-20.
18100	.s 1;.TP 4;.I -20;133	0035	ALGOLW
18200	.br;Redefined JOBDAT symbols. Program compiles, loads, and runs
18300	successfully.
18400	.s 1;.TP 4;.I -20;134	0036	FISHER
18500	.br;Edited the source file to delete extra CRLF's.  Program compiles,
18600	loads, and runs successfully.
18700	.s 1;.TP 4;.I -20;135	-	ALOCSP
18800	.br;Deleted: Specific to TOPS-10.
18900	.s 1;.TP 4;.I -20;136	-	DEC-10 DEMO PACKAGE
19000	.br;Deleted: depends upon EDIT-10.
19100	.s 1;.TP 4;.I -20;137	0037	COB300
19200	.br;Modified one variable to be a non-reserved word; program compiles
19300	and loads.  Should be tested on a Burroughs COBOL program.
19400	.s 1;.TP 4;.I -20;138	-	FFM
19500	.br;Deleted: source files are missing, and the .REL library is 
19600	F40-compatible.
19700	.s 1;.TP 4;.I -20;139	0038	TALK8F
19800	.br;Redefined format of octal constants and redefined JOBDAT symbols.
19900	Program  compiles, loads, and runs.  Needs a PDP-8 for testing.
20000	.s 1;.TP 4;.I -20;140	-	DSKDTA
20100	.br;Deleted: DECtapes not supported on a "20".
20200	.s 1;.TP 4;.I -20;141	-	EXCON
20300	.br;Deleted: DECtapes not supported on a "20".
20400	.s 1;.TP 4;.I -20;142	0039	MATHLAB
20500	.br;Converted .SAV to .EXE file, patched ESC character as described
20600	in manual.  Program ran test case in manual correctly.  Program
20700	should be recompiled and reloaded.
20800	.s 1;.TP 4;.I -20;143	0040	COBSTD
20900	.br;Minor syntactical correction required, but otherwise program
21000	compiled, loaded, and ran successfully.
21100	.s 1;.TP 4;.I -20;145	-	RUNH
21200	.br;Deleted:  Specific to TOPS-10.
21300	.s 1;.TP 4;.I -20;148	-	LOD11X
21400	.br;Deleted: requires TOPS-10 monitor patch (not applicable for
21500	TOPS-20).
21600	.s 1;.TP 4;.I -20;149	-	EDITOR
21700	.br;Deleted: DECtapes not supported on a "20".
21800	.s 1;.TP 4;.I -20;151	0041	KWIC
21900	.br;Compiles, loads, and runs successfully.
22000	.s 1;.TP 4;.I -20;152	-	RIPOFF
22100	.br;Deleted: Specific to TOPS-10.
22200	.s 1;.TP 4;.I -20;153	0042	CHANGE
22300	.br;Redefined JOBDAT symbols.  Program compiles, loads, and runs.
22400	Needs testing.  Note that a revised version is available directly
22500	from DEC.
22600	.s 1;.i-20;154	-	COBOL QUEUEING ROUTINES
22700	.br;Deleted: Specific to TOPS-10.
22800	.s 1;.TP 4;.I -20;155	-	USET
22900	.br;Deleted: Specific to TOPS-10.
23000	.s 1;.TP 4;.I -20;156	0043	ASYNC COMMUNICATION WITH PDP-8
23100	.br;Redefined JOBDAT symbols and altered logical name search. 
23200	Programs now compile, load, and run.  Needs testing with a PDP-8.
23300	.s 1;.TP 4;.I -20;157	0044	STREAM
23400	.br;Changed subroutine calls to PUSHJ/POPJ's.
23425	Fixed up argument list references.
23450	Program now compiles
23500	and loads.  Needs testing.
23600	.s 1;.TP 4;.I -20;159	0045	PAGER
23700	.br;Program compiles, loads, and runs successfully.
23800	.s 1;.TP 4;.I -20;160	-	TERBIN
23900	.br;Deleted: Papertape not supported on "20".
24000	.s 1;.TP 4;.I -20;161	0046	ABACUS
24100	.br;Minor modifications required because of MACRO version changes.
24200	Program compiles, loads, and runs successfully.
24300	.s 1;.TP 4;.I -20;162	-	POOMAS
24400	.br;Deleted: Use SIMULA instead.  Compilation problems with
24500	manner in which JOBXXX symbols were defined.
24600	.s 1;.i-20;164	0047	CROSS
24700	.br;Created IOFIL.FOR to handle IFILE/OFILE subroutine calls from
24800	F40 and modified RENAME.MAC to use PUSHJ/POPJ calls.  
24850	Modified FORMAT statements.
24900	Program now compiles, loads, and runs test case correctly.
25000	.s 1;.TP 4;.I -20;165	0048	RDMT11
25100	.br;Compiles, loads, and runs successfully.  Needs testing with
25200	PDP-11 magnetic tapes, though.
25300	.s 1;.TP 4;.I -20;166	-	BLOCK
25400	.br;Deleted: redefining JOBDAT symbols and successfully reloading
25500	source code generated a file which would not run successfully.
25600	Functionality duplicated by CHANGE available from DEC and DECUS.
25700	.s 1;.TP 4;.I -20;167	0049	GENPLT
25800	.br;Added DOUBLE PRECISION statement to allow 6 characters per word.
25900	Programs compile, load, and run test case correctly.
26000	.s 1;.TP 4;.I -20;168	0050	TBLTRN
26100	.br;Modified one macro subroutine to use PUSHJ/POPJ calling
26200	convention.  Program compiles, loads, and runs successfully.
26300	.s 1;.TP 4;.I -20;169	0051	CTFFT
26400	.br;Program compiled, loaded, and ran one test file correctly (within
26410	roundoff error).  Other test file (for subroutine FOURG) was
26420	garbled at time of original submittal.  Subroutine compiles, though
26430	no testing was done on it.
26500	.s 1;.TP 4;.I -20;170	0052	UFLIP
26600	.br;Program compiled, loaded, and ran test case correctly.
26700	.s 1;.TP 4;.I -20;171	0053	CARDIAC MACHINE LANGUAGE SIMULATOR
26800	.br;Corrected one mistyped line in the BASIC program.  Program
26900	runs successfully.
27000	.s 1;.TP 4;.I -20;173	0054	FLMON
27100	.br;Program compiles, loads, and runs successfully.  Needs testing
27200	with a plotter.
27300	.s 1;.TP 4;.I -20;174	-	LCAP
27400	.br;Deleted: use version from WMU package.
27500	.s 1;.TP 4;.I -20;175	-	CHAINR
27600	.br;Deleted: Specific to TOPS-10.
27700	.s 1;.TP 4;.I -20;176	-	ACCTG
27800	.br;Deleted: Specific to TOPS-10.
27900	.s 1;.TP 4;.I -20;177	0055	SIGN MAKER
28000	.br;Changed format of octal constants to FORTRAN-20 form; changed
28100	DEFINE FILE to OPEN; and changed search for SIGN.LIB from [1,4]
28200	to SYS:. Program compiles, loads, and runs correctly.
28300	.s 1;.TP 4;.I -20;178	0056	MTIO
28400	.br;Changed calling sequence to PUSHJ/POPJ.  Program compiles and
28500	loads.  Needs to be tested with a magtape and main program.
28600	.s 1;.TP 4;.I -20;179	0057	FASBOL
28700	.br;Converted .SAV to .EXE file, which appears to run (saved as
28800	FASBOL.EXE).  Recompiled, reloaded, and saved as SNOBOL.EXE
28900	(which appears to run correctly).
29400	.s 1;.TP 4;.I -20;181	0058	EDITS
29500	.br;A spurious character in source file was deleted.  Program compiles,
29600	loads, and runs successfully.
29700	.s 1;.TP 4;.I -20;182	0059	TXTPAD AND TXTTAB
29800	.br;Programs compile.  TXTPAD has undefined globals on loading because of
29900	need for hardware routines.  TXTTAB ran successfully.
30000	.s 1;.TP 4;.I -20;183	0060	GRAPH
30100	.br;Subroutines compile with warnings.
30200	.s 1;.TP 4;.I -20;184	0148	SPELL
30300	.br;Original program failed to compile because symbols in conditional
30400	statements weren't assembled and defined.  Simple fixes to source
30500	file were required.  Also fixed error which demanded a dictionary file
30550	even if one had been loaded.  Program now compiles and runs correctly.
30600	.s 1;.TP 4;.I -20;185	0061	SYNTAX
30700	.br;Fails to compile, but code is sufficiently similar to PASCAL
30710	that only minor modifications should be needed to convert to PASCAL.
30720	Files left on distribution in hopes that an interested user will
30730	revise and resubmit.
30800	.s 1;.TP 4;.I -20;186	0062	META2
30900	.br;Redefined .JBFF; program compiles, loads, and runs successfully.
31000	.s 1;.TP 4;.I -20;187	0063	ASYNCH COMMUNICATION
31100	.br;Converted calling sequence to PUSHJ/POPJ for FORTRAN subroutines.
31200	Programs compile and load.  Needs testing.
31300	.s 1;.TP 4;.I -20;188	-	Z
31400	.br;Deleted: Specific to TOPS-10.
31500	.s 1;.TP 4;.I -20;189	0064	MAFIA
31600	.br;Redefined JOBDAT symbols.  Program compiles, loads, and runs
31700	successfully.  Needs testing.
31800	.s 1;.TP 4;.I -20;190	0065	BATTLESHIP
31900	.br;Program runs.
32000	.s 1;.TP 4;.I -20;190	-	DECTAPE ACCOUNTING
32100	.br;Deleted: DECtapes not supported on a "20".
32200	.s 1;.TP 4;.I -20;193	0066	*1
32300	.br;Needs to be recompiled.
32400	No testing done.
32500	.s 1;.TP 4;.I -20;195	-	GRAFITI
32600	.br;Deleted: FORTRAN calling conventions are wrong; one source
32700	file (XFILE) is missing and the corresponding .REL file was compiled
32800	with F40.
32900	.s 1;.TP 4;.I -20;196	-	MTFILE
33000	.br;Deleted: Specific to TOPS-10 (in internal symbols used by program).
33100	Considerable conversion effort required.
33200	.s 1;.TP 4;.I -20;197	0067	FILTER
33300	.br;Sources compiled with numerous errors caused by use of (new)
33400	reserved words.  Changes yet to be made but should be easy to fix.
33500	.s 1;.TP 4;.I -20;198	0068	IMP72
33600	.br;Converted .SAV file to .EXE, which ran successfully.  Recompilation
33700	fails for some program modules.
33800	.s 1;.TP 4;.I -20;199	-	COFUP
33900	.br;Deleted: Specific to TOPS-10.
34000	.s 1;.TP 4;.I -20;200	0069	VTED AND RTRANS
34100	.br;RTRANS runs correctly.  VTED needs testing on DEC VT terminals.
34200	.s 1;.TP 4;.I -20;201	-	LOST
34300	.br;Deleted: Specific to TOPS-10.
34400	.s 1;.TP 4;.I -20;202	-	MANTIS
34500	.br;Deleted: Specific to TOPS-10 (F40 compiler).
34600	.s 1;.TP 4;.I -20;203	0070	GUNNER
34700	.br;Program runs correctly.
34800	.s 1;.i-20;204	-	OPR
34900	.br;Deleted: Specific to TOPS-10.
35000	.s 1;.TP 4;.I -20;205	-	OPEN
35100	.br;Deleted: Specific to TOPS-10 (F40 compiler) and functionality
35200	is readily available in FORTRAN-20.
35300	.s 1;.TP 4;.I -20;206	-	BAKWDS
35400	.br;Deleted: Specific to TOPS-10.
35500	.s 1;.TP 4;.I -20;207	0071	EYES
35600	.br;Compiles, loads, and runs successfully.
35700	.s 1;.TP 4;.I -20;208	0072	SCAT2
35800	.br;Program compiles, loads, and runs successfully.
35900	.s 1;.TP 4;.I -20;209	0073	RANDU
36000	.br;Subroutine compiles, loads, and runs successfully. Results not
36100	verified for accuracy.
36200	.s 1;.TP 4;.I -20;210	-	UCI-LISP
36300	.br;Deleted:
36400	
36500	LISP program fails in execution while looking for LISP.HGH - appears
36600	to be a readily correctable error, but with other versions of
36700	LISP available, this version would likely not be of great value.
36800	.s 1;.TP 4;.I -20;211	0074	GNOSIS
36900	.br;Program compiles, loads, and runs successfully.
37000	.s 1;.TP 4;.I -20;212	0075	SPPLT AND SPTEX
37200	.br;Programs compile and run successfully.
37300	.s 1;.TP 4;.I -20;213	-	BLISS-11
37400	.br;Converted .EXE files did not run.  Recompilation of sources
37500	gave numerous errors.
37600	.s 1;.TP 4;.I -20;214	0076	ABACUS
37700	.br;Converted JOBDAT symbols. Program compiles, loads, and runs
37800	successfully.
37900	.s 1;.TP 4;.I -20;217	-	DFCODE
38000	.br;Deleted: DECtapes not supported on a "20".
38100	.s 1;.TP 4;.I -20;218	-	PALDIS
38200	.br;Deleted: Papertape not supported on a "20".
38300	.s 1;.TP 4;.I -20;219	-	CHECKING ACCOUNT BALANCER
38400	.br;Program not tested due to lack of working FOCAL at time of evaluation.
38500	.s 1;.TP 4;.I -20;220	-	TOPSTEACH
38600	.br;Deleted: Specific to TOPS-10.
38700	.s 1;.TP 4;.I -20;221	0077	NMRSIM AND TTYOPS
38800	.br;Changed subroutine calling sequence to PUSHJ/POPJ; programs
38900	compile, load, and run successfully.  No testing without plotter
39000	hardware.
39100	.s 1;.TP 4;.I -20;222	-	FFT
39200	.br;Source file was garbled and unusable.
39300	.s 1;.TP 4;.I -20;223	0078	SIMULA
39400	.br;Compiler assembled, loaded, and ran successfully.
39500	Note an error message associated with module M2.MAC which is apparently
39600	caused by a misplaced conditional terminator, but the resulting symbol
39700	is properly defined as external nevertheless.
39800	Note that the package has been reorganized to contain just DEC-20
39900	code.
40000	.s 1;.TP 4;.I -20;224	0079	SPICE/SLIC/SINC
40100	.br;Programs compile, load, and run correctly.
40200	.s 1;.TP 4;.I -20;225	-	POET
40300	.br;Deleted: Specific to TOPS-10.
40400	.s 1;.TP 4;.I -20;226	0080	AVAIL
40500	.br;Programs compile, load, and run correctly.  Note that there is
40600	a requirement for directory numbers, though.  This program should be
40700	modified when a native-20 FOROTS system is available.
40800	.s 1;.TP 4;.I -20;227	0081	UTILITIES
40900	.br;Some programs in this package needed COBOL variable-names to be
41000	changed because of changes in COBOL reserved words; they then compiled,
41100	loaded, and ran successfully.  Others in the package appear to be
41200	incomplete and unusable.  Complete package is left in the library for
41300	those who want to work on them.
41400	.s 1;.TP 4;.I -20;228	0082	CALCOMP PLOTTER PACKAGE
41500	.br;Some modifications required to get package to load properly.
41600	Programs compile, load, and run successfully. Requires plotter hardware
41700	to verify.
41800	.s 1;.TP 4;.I -20;229	0083	ASTRO
41900	.br;Program compiles, load, and runs successfully.
42000	.s 1;.TP 4;.I -20;230	0084	ASYNCH COMMUNICATION
42100	.br;Programs compile, load, and run successfully.  No testing done.
42200	.s 1;.TP 4;.I -20;231	-	TULIP
42300	.br;Deleted: Numerous compilation errors.  Functionality available
42400	in TOPS-20 JSYS's.
42500	.s 1;.TP 4;.I -20;233	0085	ZAP
42600	.br;Program compiles, loads, and runs successfully.
42700	.s 1;.TP 4;.I -20;235	0087	LAN
42800	.br;Programs run. No testing done.
42900	.s 1;.TP 4;.I -20;236	-	FOLD
43000	.br;Deleted: Papertapes not supported on a "20".
43100	.s 1;.TP 4;.I -20;237	0088	PILOT
43200	.br;Modified compiler to look for PILOT.EXE rather than PILOT.SHR.
43300	Compiler compiles with a few MACRO "E" errors, but loads successfully.
43400	Resulting program successfully compiled the demo program supplied.
43500	.s 1;.TP 4;.I -20;238	0089	EXETER
43600	.br;Programs compile (with truncation warnings), load, and run
43700	successfully.
43800	.s 1;.TP 4;.I -20;239	-	RWATCH
43900	.br;Deleted: Specific to TOPS-10.
44000	.s 1;.TP 4;.I -20;240	0090	KISMET
44100	.br;Modified search path for help file. Program compiles, loads, and
44200	runs successfully.
44300	.s 1;.TP 4;.I -20;241	0091	FORTH
44400	.br;Compiles, loads, and runs successfully.
44500	.s 1;.TP 4;.I -20;242	-	IOLIB
44600	.br;Deleted: Specific to TOPS-10, and functionality reproduced in
44700	TOPS-20 JSYS's.
44800	.s 1;.TP 4;.I -20;243	-	PIRETS
44900	.br;Deleted: Uses features of the TOPS-10 monitor not available on
45000	TOPS-20.
45100	.s 1;.TP 4;.I -20;244	0092	WGMM11
45200	.br;Corrected garbled characters in middle of source file.  Program
45300	now compiles, loads, and runs successfully.
45400	.s 1;.TP 4;.I -20;245	0093	MESS
45500	.br;Programs compile, load, and run successfully.
45600	.s 1;.TP 4;.I -20;246	-	RECSM
45700	.br;Deleted: source files garbled; when corrected, program still gives
45800	illegal memory access.
45900	.s 1;.TP 4;.I -20;247	-	HEXPAWN
46000	.br;Deleted:  Written for XBASIC, not known to be available for the
46100	DEC-20.
46200	.s 1;.TP 4;.I -20;248	0094	TR
46300	.br;Program compiles, loads, and runs successfully.
46400	.s 1;.TP 4;.I -20;249	0095	GAUSS
46500	.br;Subroutines compile.  No testing done.
46600	.s 1;.TP 4;.I -20;251	0096	TBF
46700	.br;Program compiles, loads, and runs successfully.
46800	.s 1;.TP 4;.I -20;252	-	SOS
46900	.br;Deleted: Functionality duplicated by TOPS-20 EDIT, and SOS
47000	doesn't use full TOPS-20 file specifications.
47100	.s 1;.TP 4;.I -20;253	0097	READ
47200	.br;Program compiles, loads, and runs successfully.
47300	.s 1;.TP 4;.I -20;254	0098	MAGGIE
47400	.br;Program compiles, loads, and runs successfully.  Needs testing
47500	with magnetic tape.
47600	.s 1;.TP 4;.I -20;255	0099	INVSIM
47700	.br;Program compiles, loads, and runs successfully.
47800	.s 1;.TP 4;.I -20;256	-	D2D
47900	.br;Deleted: Specific to TOPS-10.
48000	.s 1;.TP 8;.I -20;257	0100	LINCUR
48100	.br;Revised submittal lacked functions DARCOS and DARSIN which were
48200	in the sources for original submittal.  These were copied from
48300	original into file DAFUNS.FOR and the load command string modified.
48400	File LINCUR.CTL contains revisions necessary to compile, load, and
48500	test revised version on a DEC-20.
48600	Programs compile, load, and run successfully.
48700	.s 1;.TP 10;.I -20;258	0101	NONLIN
48800	.br;Revised submittal lacked functions DARCOS and DARSIN which were
48900	in the sources for original submittal.  These were copied from
49000	original into file DAFUNS.FOR and the load command string modified.
49100	File NONLIN.CTL contains revisions necessary to compile, load, and
49200	test revised version on a DEC-20.
49300	Programs compile, load, and run test data correctly.
49400	.s 1;.TP 4;.I -20;259	-	PDO
49500	.br;Deleted:  DECtapes not supported on a "20".
49600	.s 1;.TP 4;.I -20;260	0102	INFORMATION STORAGE AND RETRIEVAL
49700	.br;Program compiles and runs successfully.
49800	.s 1;.TP 4;.I -20;261	0103	SORTER
49900	.br;Program compiles and runs successfully.
50000	.s 1;.TP 4;.I -20;262	0104	COMPUT AND TWOPER
50100	.br;Programs compile and run successfully.
50200	.s 1;.TP 4;.I -20;263	-	DSKCPY
50300	.br;Deleted: Specific to TOPS-10.
50400	.s 1;.TP 4;.I -20;264	0105	XTEC
50500	.br;Program compiles, loads, and runs successfully.
50600	.s 1;.TP 4;.I -20;265	0106	BASIC 17E
50700	.br;Note that there are no sources.  The .SHR files were converted
50800	to .EXE files and ran correctly.
50900	Note the bugs listed in the review.
51000	.s 1;.TP 4;.I -20;266	0107	TOPS-10 SIMULATOR
51100	.br;Compiles with warnings, loads, and runs successfully.  No
51200	documentation of format of parameter file.
51300	.s 1;.TP 4;.I -20;267	0108	COBEDT
51400	.br;Program compiles, loads, and runs successfully.
51500	.s 1;.TP 4;.I -20;268	-	IPCF10
51600	.br;Deleted: Specific to TOPS-10.
51700	.s 1;.TP 4;.I -20;269	0109	ADRES
51800	.br;Program compiles (under SIMULA, 20-0078), loads, and runs successfully.
51900	.s 1;.TP 4;.I -20;270	0110	PROC10
52000	.br;Converted .SHR to .EXE file, which runs.  Source modules missing
52100	and so cannot recompile and reload package.
52200	.s 1;.TP 4;.I -20;271	-	PASCAL
52300	.br;Deleted.  See 20-0003 (10-283).
52400	.s 1;.TP 4;.I -20;272	0111	BESLIB
52500	.br;Program compiles, loads, and correctly runs test case.
52600	.s 1;.TP 4;.I -20;273	0112	INDEX
52700	.br;Program compiles, loads, and runs BESLIB test case successfully.
52800	.s 1;.TP 4;.I -20;274	0113	CADA
52900	.br;Program compiles and runs successfully.
53000	.s 1;.TP 4;.I -20;275	-	DTSORT
53100	.br;Deleted: DECtapes not supported on a "20".
53200	.s 1;.TP 4;.I -20;276	0114	FPRINT
53300	.br;Subroutine compiles correctly.  Not tested.
53400	.s 1;.TP 4;.I -20;277	0115	TWOSID
53500	.br;Program compiles, loads, and runs correctly.
53600	.s 1;.TP 4;.I -20;280	-	CLUSTR
53700	.br;Deleted: Source files missing and use non-standard plotting
53800	routines, also not supplied.
53900	.s 1;.TP 4;.I -20;281	-	SAFIO
54000	.br;Included as a subdirectory under SIMULA, 20-0078.
54100	.s 1;.TP 4;.I -20;282	-	SIMDBM
54200	.br;Included as a subdirectory under SIMULA, 20-0078.
54300	.s 1;.TP 4;.I -20;284	0118	PICTURE BOOK
54400	.br;Programs compile, load, and run successfully.
54800	.s 1;.TP 4;.I -20;285	0119	SQUASH
54900	.br;Modified subroutines to use PUSHJ/POPJ convention; program
55000	compiles, loads, and runs successfully.
55100	.s 1;.TP 4;.I -20;286	0120	CUSH2
55200	.br;Program compiles, loads, and correctly executes test data from
55300	documentation.
55400	.s 1;.TP 4;.I -20;287	-	BOSS
55500	.br;Deleted: Uses IPCF10 DECUS Library program, and accounting structure
55600	for TOPS-20 is different anyway.
55700	.s 1;.TP 4;.I -20;289	-	REV
55800	.br;Deleted:  Program compiles, loads, and begins execution.  
55900	It is unreliable, though, and would need extensive rewriting to be
56000	functional.
56100	.S 1;.TP 4;.I -20;290	0121	VENN
56200	.br;Program compiles, loads, and runs successfully.
56300	.s 1;.TP 4;.I -20;291	0122	XPL
56400	.br;Program compiles, loads, and runs successfully.
56500	.s 1;.TP 4;.I -20;292	0123	REVISED PLOTTER SUBROUTINES
56600	.br;Programs compile, load, and run successfully.
56700	.s 1;.TP 4;.I -20;293	0124	FLECS
56800	.br;Program compiles, loads, and runs successfully.  Implementation
56900	manual, which was supposed to be with package, was not.
57000	.s 1;.TP 4;.I -20;294	0125	GIDUS/DISLIB
57100	.br;Programs compile successfully.  No testing done.  New command
57200	file was created.
57300	.s 1;.TP 4;.I -20;295	-	SIMULA FOR KA-10
57400	.br;Deleted: Specific for TOPS-10.
57500	.s 1;.TP 4;.I -20;296	-	BLISS-11/RSX-11M INTERFACE MACROS
57600	.br;Deleted:  BLISS-11 not functioning.
57700	.s 1;.TP 4;.I -20;297	0126	ATOPLT
57800	.br;Program compiles, loads, and runs successfully. Needs testing.
57900	.s 1;.TP 4;.I -20;298	0127	NORMAL
58000	.br;Program compiles, loads, and runs successfully.
58100	.s 1;.TP 4;.I -20;299	0128	COPYMT
58200	.br;Program compiles, loads, and runs successfully.
58300	.s 1;.TP 4;.I -20;300	0129	BAKGMN
58400	.br;Program compiles, loads, and runs successfully.
58500	.s 1;.TP 4;.I -20;301	0130	STRMAC
58600	.br;Program compiles, loads, and runs successfully.
58700	.s 1;.TP 4;.I -20;302	0131	LIBMAN
58800	.br;Program compiles, loads, and runs correctly (except that the
58900	DIRECT program doesn't exist on TOPS-20).
59000	.s 1;.TP 4;.I -20;303	0132	DUMPR
59100	.br;Program compiles, loads, and runs successfully.
59200	.s 1;.TP 4;.I -20;304	-	XGLOB
59300	.br;Deleted: Program compiled and loaded but failed during execution
59400	apparently because of the way it dynamically used memory and tried
59500	to reread the program over data.  Would need work to run on TOPS-20.
59600	.s 1;.TP 4;.I -20;305	0133	BIORTH
59700	.br;Replaced a GETTAB UUO with GTAD JSYS. Program compiles, loads, and
59800	runs successfully.
59900	.s 1;.TP 4;.I -20;306	0134	FOCAL-10
60000	.br;Program compiles, loads, and runs successfully.  Extensive 
60100	testing not done.
60200	.s 1;.TP 4;.I -20;307	0135	VIDED
60500	.br;The source file for VIDED generates undefined- and multiply-defined
60600	globals during loading.
60650	Source files for latest version are in COMP subdirectory, .EXE files
60675	from earlier version are in SYS subdirectory.
60700	.s 1;.TP 4;.I -20;308	-	PLOTY
60800	.br;Deleted:  Files are garbled and useless.  Programs will be added
60900	at later date if correct files can be located.
61000	.s 1;.TP 4;.I -20;309	0136	MACY-11/LNKX-11
61100	.br;Programs compile, load, and run correctly.
61200	.s 1;.TP 4;.I -20;310	0137	WMU Application Library
61300	.br;Most programs work as submitted.  Some work done to load without
61400	overlays.  Complete package has been split into separate subdirectories
61500	for ease of access.
61600	.s 1;.TP 4;.I -20;311	-	BRDEAL
61700	.br;Deleted: Files are garbled and useless.
61800	.s 1;.TP 4;.I -20;312	0138	MAGTAPE UTILITY PACKAGE
61900	.br;Programs compile, load, and run successfully.
62000	.s 1;.TP 4;.I -20;313	-	DIRSRT
62100	.br;Deleted: TOPS-20 directories are already sorted.
62200	.s 1;.TP 4;.I -20;314	-	SCAN.DOC
62300	.br;Deleted: Functionality already exists in TOPS-20 COMND JSYS.
62400	.s 1;.TP 4;.I -20;315	-	DTCERT
62500	.br;Deleted: DECtape not supported on a "20".
62600	SCAN is specific to TOPS-10.
62700	.s 1;.tp 4;.i -20;316	0139	TECO10
62800	.br;Renamed files to TECO20, recompiled with TOPS-20 option on.
62900	Compiles, loads, and runs.  Does not recognize filename supplied
63000	on command line, but does seem to function.
63100	.s 1;.TP 4;.I -20;317	0140	CROSS
63200	.br;Program compiles, loads, and runs successfully.
63300	.s 1;.TP 4;.I -20;318	0141	FASP
63400	.br;Modified dimensions of COMMON FASPG to have modules agree on size.
63450	Program compiles, loads, and runs successfully.
63500	.s 1;.TP 4;.I -20;319	0142	WKDAY
63600	.br;Program compiles, loads, and runs correctly.
63700	.s 1;.TP 4;.I -20;320	0143	STRUCT
63800	.br;Macros compile and seems to work.
63900	.s 1;.TP 4;.I -20;321	-	FORUM
64000	.br;Deleted: Specific to TOPS-10, and functionality is already
64100	existent (almost) in TOPS-20 TALK command.
64200	.s 1;.TP 4;.I -20;322	0144	CALENDAR MAKER
64300	.br;Data files generate output as desired.
64400	.s 1;.tp 4;.i -20;323	-	TRAD8
64500	.br;Deleted: Paper tape reader not supported on "20".
64600	.s 1;.tp 4;.i -20;324	0149	MULREG
64700	.br;Program compiles with warning messages and loads and runs
64800	correctly (when compiled with the DEC-20 SIMULA from DECUS).
64900	.s 1;.tp 4;.i -20;325	0145	ANTE
65000	.br;Compiles, loads, and runs successfully.
65100	.s 1;.tp 4;.i -20;326	0146	KEYWRD
65200	.br;Compiles, loads, and successfully runs test case supplied by
65300	author.
65400	.s 1;.tp 4;.i -20;327	-	PENNZYME
65500	.br;Deleted: Undefined globals for routines not submitted with
65600	program.
65700	Author will resubmit package.
65800	.s 1;.tp 4;.i -20;328	0147	FORMAT
65900	.br;Compiles, loads, and successfully runs test case supplied by
66000	author.
66100	.s 1;.tp 4;.i -20;-	0001	CALC (TOPS-20)
66200	.br;Compiles, loads, and runs successfully.  Indirect commands
66300	do not appear to function.
66400	.s 1;.TP 4;.I -20;283	0003	SYSTEMS PROGRAMMERS PASCAL
66500	.br;Native-20-mode System Programmer's PASCAL from Charles Hedrick
66600	at Rutgers.
66700	.s 1;.tp 4;.i -20;-	0004	INTERLISP (TOPS-20)
66800	.br;Patched BOOT.SAV to replace a JSYS which had been deleted after
66900	Release 2 of TOPS-20; program now begins execution.  Note that no
67000	source files are supplied (.EXE only) and that the first chapter of
67100	the manual is missing.  Other chapters renamed *.DOC.
67200	.page