Google
 

Trailing-Edge - PDP-10 Archives - decus_20tap4_198111 - decus/20-0108/filio.mac
There are 17 other files named filio.mac in the archive. Click here to see a list.
;/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/
;
;			F I L I O 
;
;	PERFORM VARIOUS FILE UTILITY ROUTINES FOR COBEDT
;
;				DAVE GORKA
;				18-JUNE-76
;
;/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/

	TITLE	FILIO
	SUBTTL	VARIOUS SUBROUTINES FOR FILE HANDLERS
	TWOSEG
.IOIMG==10			; I/O IMAGE MODE
P=17				; THE PDL REGISTER

OPDEF	CALL	[PUSHJ P,]
OPDEF	RET	[POPJ  P,]
OPDEF	PJRST	[JRST    ]

TTY==1				; CHANNEL FOR TTY I/O
DSK==2				; CHANNEL FOR DSK INPUT
DS2==3				; CHANNEL FOR DSK OUTPUT
DS3==4				; CHANNEL FOR DSK UTILITIES
DS4==5				; ASCII CHANNEL FOR INPUT

INTERNAL	SCAN		; FILE NAME SCANNER
INTERNAL	TTYINI,TTYI	; TTY SUBROUTINES
INTERNAL	DSKINI,DSKIN	; INPUT FROM DISK
INTERNAL	DSKCLS		; CLOSE
INTERNAL	DS2INI,DS2OUT	; OUTPUT TO DISK
INTERNAL	DS2CLS		; CLOSE
INTERNAL	DS3INI,DS3OUT	; 3RD I/O CHANNEL
INTERNAL	DS3CLS		; CLOSE
INTERNAL	DS4INI,DS4IN,DS4CLS
INTERNAL	TTYLST			; LAST CHAR FROM TTY
	SUBTTL	TTY I/O ROUTINES
;/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/
;
;	CALLED VIA:
;		PUSHJ 17,TTYINI
;	RETURNS:
;		+1   CANNOT INIT TTY
;		+2   TTY INITED
;
;/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/

	RELOC	400000

TTYINI:	CLOSE	TTY,		; CLOSE THE TTY CHANNEL
	RELEASE	TTY,		; AND  RELEASE
	INIT	TTY,0		; INITIALIZE THE CHANNEL WITH 1 BUFFER
	SIXBIT	.TTY.		; DEVICE TYPE
	+	TTIBUF		; STARTING ADDR OF RING BUFFERS
	RET			; +1 => BAD INITIALIZATION
	INBUF	TTY,2		; SETUP INPUT
	AOS	0(P)		; +2 => GOOD RETURN
	RET


TTYI:	SOSG	TTIBUF+2	; CHARACTERS TO INPUT ?
	INPUT	TTY,		; NO =- GET SOME
	GETSTS TTY,1		; GET THE STATUS
	TRZE	1,762000	; ANY BAD BITS ?
	JRST	TTYX		; YES
	ILDB	1,TTIBUF+1	; GET THE CHARACTER
	MOVEM	1,TTYLST	; SAVE FOR CHARACTER SCANNERS
	JUMPE	1,TTYI		; IGNORE ALL NULLS
	RET
TTYX:	CALL	TTYINI		; TRY AGAIN
	JRST	4,.
	JRST	TTYI		; TRY AGAIN
	SUBTTL	DISK INPUT ROUTINES
;/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/
;		DISK INPUT ROUTINES
;
;	CALLED WITH:
;		1/	FILE NAME
;		2/	EXTENSION
;		3/	PPN  
;
;	RETURNS:
;		+1	INIT FAILURE FOR DISK
;		+2	LOOKUP FAILURE FOR FILE
;		+3	FILE INITIALIZATION OK
;/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/

DSKINI:	CALL	DSKCLS
	OPEN	DSK,DSKPKT	; OPEN THE DEVICE FOR INPUT
	RET			; +0 => OPEN FAILURE
	AOS	0(P)		; INCREMENT RETURN ADDRESS
	MOVE	4,3		; COPY PPN
	SETZ	3,		; ZERO
	INBUF	DSK,2		; SET UP 2 RING BUFFERS
	LOOKUP	DSK,1		; GO GET THE FILE
	RET			; OOPS - LOOKUP FAILED
	AOS	0(P)		; +2 => OK RETURN
	RET			; GIVE THE GOOD RETURN

DSKIN:	AOS	0(P)		; SKIP RETURN
	SOSG	DSKBUF+2	; ANY CHARACTERS LEFT ?
	CALL	DSKIN1		; NO -- GET SOME
	ILDB	1,DSKBUF+1	; GET THE CHARACTER
	RET
DSKIN1:	MOVEI	1,(POINT 36,0,35)
	HRLM	1,DSKBUF+1	; CORRECT
	INPUT	DSK,		; READ THE NEXT BUFFER
	STATO	DSK,762000	; INPUT DATA ERROR ?
	JRST	DSKIN3		; NO - BUILD A SIX BIT BUFFER
	GETSTS	DSK,1		; 1 HAS THE TERMINATION DATA
	POP	P,0(P)
	SOS	0(P)
	RET			; RETURN TO USER
DSKIN3:	MOVEI	1,DSKBUF	; PASS THE BUFFER
	PJRST	SIXCON		; AS A PARAMETER
DSKCLS:	CLOSE	DSK,
	RELEASE	DSK,
	RET
	SUBTTL	OUTPUT FILE ROUTINES
;/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/
;	CALLED WITH:
;		1/	FILENAME
;		2/	EXTENSION
;		3/	PPN
;	RETURNS:
;		+1	INIT FAILURE
;		+2	ENTER FAILURE
;		+3	ALL OK
;/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/

DS2INI:	CALL	DS2CLS
	OPEN	DS2,DS2PKT	; OPEN THE DEVICE FOR INPUT
	RET			; +0 => OPEN FAILURE
	AOS	0(P)		; INCREMENT RETURN ADDRESS
	MOVE	4,3
	SETZ	3,		; MOVE PPN TO RIGHT SPOT
	OUTBUF	DS2,2		; SET UP 2 RING BUFFERS
	ENTER	DS2,1		; GO GET THE OUTPUT FILE
	RET			; OOPS - FAILED
	AOS	0(P)		; +2 => OK RETURN
	RET			; GIVE THE GOOD RETURN

DS2OUT:	AOS	0(P)		; GIVE SKIP NOW
	SOSG	DS2BUF+2	; CHARACTER LEFT TO OUTPUT ?
	CALL	DS2OU1		; NO -- FLUSH BUFFER
	IDPB	1,DS2BUF+1	; DEPOSIT THE CHAR
	RET
DS2OU1:	PUSH	P,1		; SAVE
	MOVEI	1,(POINT 36,0,35)
	HRLM	1,DS2BUF+1	; SET HERE
	OUTPUT	DS2,		; DO THE WRITE
	STATO	DS2,762000	; OUTPUT DATA ERROR ?
	JRST	DS2OU3		; NO -- JUST RETURN
	GETSTS	DS2,1		; GET THE STATUS OF THE FIL
	POP	P,0(P)
	SOS	0(P)		; DECREMENT FOR NO SKIP
	RET			; RETURN TO USER WITH STATUS IN 1
DS2OU3:	MOVEI	1,DS2BUF	; PARAM
	CALL	SIXCON		; CVT TO SIXBIT RING BUFFER
	POP	P,1		; RESTORE CHAR
	RET			; AND RETURN
DS2CLS:	CLOSE	DS2,
	RELEAS	DS2,
	RET
	SUBTTL	MORE OUTPUT ROUTINES

DS3INI:	CALL	DS3CLS
	MOVEM	4,DS3PKT+1	; SAVE DEVICE TYPE
	OPEN	DS3,DS3PKT	; OPEN THE FILE
	RET			; OOPS -- NO GOOD
	AOS	0(P)		; SKIP RETURN FOR THIS PHASE
	MOVE	4,3		; PPN
	SETZ	3,
	OUTBUF	DS3,2		; SET UP OUTPUT BUFFERS
	CAMN	4,['TTY   ']
	AOSA	0(P)		; DOUBLE SKIP RETURN
	ENTER	DS3,1		; ENTER FILE FOR OUTPUT
	RET			; NO GO ON ENTER
DS3IN1:	AOS	0(P)		; SKIP RETURN
	RET			; $E

DS3OUT:	AOS	0(P)		; ASSUME A SKIP RETURN
	SOSG	DS3BUF+2	; CHAR LEFT TO OUTPUT ?
	CALL	DS3OU1		; NO -- FLUSH BUFFER
	IDPB	1,DS3BUF+1
	CAIE	1,12		; LF ?
	RET			; NO
	MOVE	1,DS3PKT+1
	CAMN	1,['TTY   ']
	CALL	DS3OU1
	MOVEI	1,12		; AND RESTORE
	RET			; RETURN -- ALL OK
DS3OU1:	OUTPUT	DS3,
	STATO	DS3,762000
	RET			; NO ERRORS
	GETSTS	DS3,1		; RETURN STATUS IN 1
	POP	P,0(P)		; THROW THIS CALL ON GROUND
	SOS	0(P)		; ON NON SKIP
	RET

DS3CLS:	CLOSE	DS3,
	RELEASE	DS3,
	RET
;	CONVERT RING BUFFERS TO SIXBIT 

SIXCON:	DMOVEM	2,1(P)		; HOPE PDL HAS ENOUGH
	MOVE	2,2(1)		; # WORDS
	MOVEI	3,6		; ASSUME SIXBIT
	TRNE	0,2000		; ** ASCII ** ?
	MOVEI	3,5		; YES -- 5 PER WORD
	IMULI	2,0(3)		; 2 = # CHARS
	MOVEM	2,2(1)		; AND SAVE
	HRRZI	2,(POINT 6,0,35)
	TRNE	0,2000		; ** ASCII ? **
	HRRZI	2,(POINT 7,0,35) ; YES

	HRLM	2,1(1)		; SET IN RING BYTE PTR
	DMOVE	2,1(P)		; GET THEM BACK
	RET			; AND RETURN
	SUBTTL	ASCII INPUT ROUTINE

DS4INI:	CALL	DS4CLS		; CLOSE UP SHOP
	MOVEM	4,DS4PKT+1	; SET DEVICE
	OPEN	DS4,DS4PKT	; INIT THE DEVICE
	RET			; BAD RETURN
	AOS	0(P)		; PHASE 1
	MOVE	4,3		; PPN
	SETZ	3,
	INBUF	DS4,2		; ONLY NEED ONE
	LOOKUP	DS4,1		; FIND THE FILE
	RET			; LOOKUP FAILED
	AOS	0(P)		; IT SUCEEDED
	RET

DS4IN:	AOS	0(P)		; GIVE A SKIP RETURN
DS4IN0:	SOSGE	DS4BUF+2	; ANY CHARACTERS ?
	JRST	DS4IN1		; NO
	ILDB	1,DS4BUF+1	; GET THE CHAR
	JUMPE	1,DS4IN0	; INGNORE ALL NULLS
	RET			; AND EXIT
DS4IN1:	INPUT	DS4,		; READ THE NEXT BLOCK
	STATO	DS4,762000	; BAD ?
	JRST	DS4IN0		; SEE IF ALL OK
	GETSTS	DS4,1		; RETURN THE BAD STATUS
	SOS	0(P)		; MAKE SURE WE DO THIS
	RET			; ON A NON SKIP

DS4CLS:	CLOSE	DS4,
	RELEAS	DS4,
	RET
	SUBTTL	SCAN -- SCAN A INPUT FILE 
;/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/
;
;			S C A N 
;
;	CALLED WITH THE ASSUMPTION THAT TTY CHANNEL INITED!
;
;	RETURNS:
;		1/	FILE NAME
;		2/	EXTENSION
;		3/	PPN (IF PRESENT)
;		4/	DEVICE (DSK IF NOT PRESENT)
;
;		+1	SOMETHING BAD HAPPENED
;		+2	ALL OK
;/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/-/
SCAN:	MOVEM	P,SAVE+P	; SAVE ALL THE REGISTERS
	MOVE	P,[0,,SAVE]	; WHAT TO SAVE
	BLT	P,SAVE+P-1	; SAVE ALL UP TO
	MOVE	P,SAVE+P	; USE THE USERS STACK
	SETZB	10,11		; 10=PPN,11=DEV,12=FN,13=EXT
	SETZB	12,13
SCNF2:	MOVSI	2,(POINT 6,)	; THE BYTE POINTER TO SIXBIT IN A0
	SETZB	0,3
SCNF3:	CALL	TTYI		; GET A CHARACTER
	CAIE	1," "		; SPACES AND
	CAIN	1,15		; CR'S ARE IGNORED
	JRST	SCNF3
	CAIN	1,"["		; START OF PPN ?
	JRST	SCNPPN		; YES,SCNPPN
	CAIE	1,"."		; ASCII PERIOD ?
	CAIN	1,":"		; POSSIBLE DEVICE SCANNED
	JRST	SCNF1		; YES - SAVE
	CAIN	1,12		; LF ?
	JRST	SCNF1
	CAIL	1,"A"
	CAILE	1,"Z"
	JRST	[CAIL	1,"0"
		 CAILE 	1,"9"
		 JRST	SCNFB
		 JRST	.+1]
	TRC	1,40		; CVT TO SIXBIT
	IDPB	1,2		; SAVE THE SIXBIT AWAY
	JRST	SCNF3
SCNF1:	CAIN	1,":"		; DEVICE ?
	MOVEI	3,11		; YES - SET INDEX
	CAIN	1,"."		; A FILENAME ?
	MOVEI	3,12		; YES =- SET THIS INDEX
	CAIN	1,12		; THE LF ? 
	JRST	[JUMPE 12,[JUMPE 0,.+4
			   MOVEI 3,12
		           JRST .+1]
		 MOVEI	3,13	; ASSUME EXTENSION
		 JRST	.+1]
	SKIPE	0(3)		; NONZERO?
	JRST	[OUTSTR	[ASCIZ@?BAD  FILE NAME@]
			 JRST	SCNBAD]
	MOVEM	0,0(3)		; SAVE THE WHATEVEDR
	CAIE	1,12
	JRST	SCNF2		; GET THE NEXT
	DMOVE	1,12		; 1=FN,2=EXT
	SKIPN	4,11		; A DEVICE SPECIFIED ?
	MOVSI	4,'DSK'		; INSERT A SIXBIT DSK
	SKIPN	3,10		; PPN ?
	CALLI	3,24		; GET THE PPN
	MOVE	P,[SAVE+5,,5]	; GET ALL
	BLT	P,P-1		; AND RESTORE
	MOVE	P,SAVE+P
	AOS	0(P)		; GIVE A GOOD SKIP
	MOVE	0,SAVE
	RET			; THEN RETURN
SCNFB:	OUTSTR	[ASCIZ@?ILLEGAL CHARACTER@]
	JRST	SCNBAD

SCNPPN:	JUMPN	10,BADPPN
	JUMPE	0,SCNP0		; ANYTHING COLLECTED ?
	JUMPN	11,.+3
	MOVE	11,0
	JRST	SCNP0
	JUMPN	12,.+3
	MOVE	12,0
	JRST	SCNP0
	MOVE	13,0		; LOAD THE EXTENSION
SCNP0:	SETZ	2,		; 2 = NUMBER
SCNP1:	CALL	TTYI		; GET A CHAR FROM THE TTY
	CAIE	1,"]"
	CAIN	1,","		; END OF PROJECT ?
	JRST	SCNP2		; YES
	IMULI	2,8		; SHOULD BE A SHIFT
	ADDI	2,-"0"(1)
	JRST	SCNP1
SCNP2:	JUMPN	10,.+3		; FIRST TIME HERE ?
	HRLZI	10,0(2)		; LOAD PROJECT UP THEN
	JRST	SCNP0		; AND $E
	HRRI	10,0(2)		; LOAD PROGRAMMER
	JRST	SCNF2
BADPPN:	OUTSTR	[ASCIZ/?CANNOT HAVE 2 PPN'S/]
SCNBAD:	OUTSTR	[BYTE (7)15,12]
	RET			; RETURN UNFAVORABLY
	SUBTTL	DATA AREA
	RELOC	0
DSKPKT:	+	.IOIMG		; IMAGE MODE
	'DSK   '		; DEVICE DISK
	+	DSKBUF		; OUTPUT RING BUFFER
DS2PKT:	+	.IOIMG		; IO IMAGE MODE
	'DSK   '		; DEVICE DSK:
	+	DS2BUF,,0		; THE RING BUFFER START
DS3PKT:	+	1B0
	'DSK   '
	+	DS3BUF,,0
DS4PKT:	1B0
	'DSK   '
	+	DS4BUF
DSKBUF:	BLOCK	3		; DSK RING BUFFER HEADER
DS1BUF:	BLOCK	3		; FOR INPUT
DS2BUF:	BLOCK	3		; FOR OUTPUT
DS3BUF:	BLOCK	3
TTIBUF::BLOCK	3		; TTY INPUT BUFFER
DS4BUF:	BLOCK	3		; ASCII INPUT BUFFER
SAVE:	BLOCK	17+1		; SAVE 0-17 IN SCAN
TTYLST:	Z			; LAST CHAR READ FROM TTY
	END