Google
 

Trailing-Edge - PDP-10 Archives - decus_20tap4_198111 - decus/20-0118/book04.p11
There is 1 other file named book04.p11 in the archive. Click here to see a list.
;PICTURE BOOK, A GRAPHICS SYSTEM FOR THE GT40


;PICTURE BOOK RESPONDS TO TELETYPE I/O IT RECEIVES FROM A HOST
;COMPUTER BY DISPLAYING THE I/O SIMILARLY TO THE WAY A VT05
;DISPLAYS
;IT ALSO RESPONDS TO GRAPHIC COMMANDS SENT IN CODE
;EITHER BY FORTRAN SUBROUTINES RUNNING IN THE HOST MACHINE
;OR DIRECTLY FROM THE HOST MACHINE'S ASSEMBLY LANGUAGE


;
;	DEC-11-GPBAA-B-LA
;
;	COPYRIGHT (C) 1974
;	DIGITAL EQUIPMENT CORPORATION
;	MAYNARD, MASSACHUSETTS 01754

;	THE INFORMATION IN THIS SOURCE LISTING IS SUBJECT TO
;	CHANGE WITHOUT NOTICE AND SHOULD NOT BE CONSTRUED AS A
;	COMMITTMENT BY DIGITAL EQUIPMENT CORPORATION.
;	DIGITAL EQUIPTMENT CORPORATION ASSUMES NO RESPONSIBILITY
;	FOR ANY ERRORS THAT MAY APPEAR IN THIS LISTING.

;	THIS SOFTWARE IS FURNISHED TO THE PURCHASER
;	UNDER A LICENSE FOR USE ON A SINGLE COMPUTER 
;	SYSTEM AND CAN BE COPIED (WITH INCLUSION OF DIGITAL'S
;	COPYRIGHT NOTICE) ONLY FOR USE IN SUCH SYSTEM, EXCEPT AS
;	MAY OTHERWISE BE PROVIDED IN WRITING BY DIGITAL.

;	DIGITAL EQUIPMENT CORPORATION ASSUMES NO RESPONSIBILITY
;	FOR THE USE OR RELIABILITY OF ITS SOFTWARE ON EQUIPMENT 
;	THAT IS NOT SUPPLIED BY DIGITAL.
;		
;
;


;R. FRIEDENTHAL


;EDIT 2, 4/25/73
;EDIT 3, 10/12/73	D. VELTEN
;EDIT 4, 26/7/74	R. GORDON, GENERAL ELECTRIC CO., BURLINGTON, VT.








	.ENABL	AMA
	.LIST	ME
	.ENABL	ABS


	.=0				;RESTART ADDRESS: 0
	JMP	START

	R0=%0
	R1=%1
	R2=%2
	R3=%3
	R4=%4
	R5=%5
	R6=%6
	R7=%7

	TEMP=R0
	ARG1=R1
	ARG2=R2
	INPTR=R3		;POINTS TO NEXT BYTE IN VT05 
	CHAR=R4			;HOLDS INPUT CHARACTER
	SSP=R5			;SUBPICTURE STACK POINTER
	SP=R6			;STACK POINTER
	PC=R7			;PROGRAM COUNTER

	;DEVICE ADDRESSES
	TENIN=175610		;TEN INPUT
	TENOUT=175614		;TEN OUTPUT
	CLKOUT=177546		;CLOCK ADDRESS
	KEYIN=177560		;KEYBOARD OUTPUT
	GTPC=172000		;GT PROGRAM COUNTER
	GTSTAT=GTPC+2		;GT STATUS WORD
	GTX=GTSTAT+2		;GT X COORDINATE
	GTY=GTX+2		;GT Y COORDINATE
	STATUS=177776		;PDP-11 STATUS REGISTER

	;VECTORS



	TENVEC=300		;TEN INPUT VECTOR
	STPVEC=320		;DSTOP
	LPVEC=STPVEC+4		;LITE PEN
	TIMVEC=LPVEC+4		;TIME-OUT
	KEYVEC=60		;KEYBOARD
	CLKVEC=100		;CLOCK


	;GT INSTRUCTIONS
	DSTP=173400		;STOP
	DNOP=164000		;NOP
	DJMP=160000		;DISPLAY JUMP
	DVEC=110000		;LONG VECTOR
	DPT=114000		;ABSOLUTE POINT
	DCHR=100000		;CHARACTER
	DRELP=130000		;RELATIVE POINT
	DRELV=104000		;SHORT VECTOR
	DGRAX=120000		;X GRAPH
	DGRAY=124000		;Y GRAPH

	BLINK=30		;BLINK MODE
	NOBLI=20		;STEADY MODE
	SOLID=4			;SOLID LINES
	LONGD=5			;LONGDASH LINES
	SHORTD=6		;SHORTDASH
	DOTD=7			;DOTDASH
	INT0=2000		;INTENSITY 0(LOWEST)
	INT1=2200
	INT2=2400
	INT3=2600
	INT4=3000
	INT5=3200
	INT6=3400
	INT7=3600		;INTENSITY 7(HIGHEST)
	ITALIC=60		;ITALIC MODE
	NOITAL=40		;UPRIGHT MODE
	LITE=140		;LITE PEN SENSITIVE
	NOLITE=100		;NON-LITE PEN SENSITIVE
	SYNC=4			;SYNC(NOT USED)


;MISCELLANEOUS


	HGHPRI=340		;HIGH PRIORITY BITS
	GTPRI=200		;GT40 PRIORITY
	TXTSTA=170000		;STATUSA TO START DFILE
	DELTAZ=174100		;ORIGINAL GRAPH INCREMENT OF 0
	SSIZE=40		;SIZE OF MAIN STACK
	SSSIZE=144		;SIZE, IN BYTES, OF SUBPICTURE STACK
	ROLSIZ=200		;ORIGINAL ROLL SIZE
	HEDSIZ=20		;ADDITIONAL INFORMATION IN DISPLAY FILE
	BUFFS=40		;MAX. AND ORIGINAL NUMBER OF BUFFERS
	BUFALL=5500		;ORIGINAL TOTAL BUFFER AREA (40@132 PER)
	LF=12			;LINE FEED
	MINUS=55		;MINUS SIGN
	QUOTE=42		;QUOTE *2
	CR=15			;CARRIAGE RETURN
	CRLF=5015		;CRLF FOR BUFFER STARTS
	CONC=3			;^C
	CONR=222		;^R(WITH PARITY BIT), RESETS THE BOOK
	SHIN=17			;SHIFT-IN CHARACTER
	SHOUT=7017		;SHIFT-OUT CHARACTER
				;SHIFT-IN IN LOW BYTE



;MACROS

	.MACRO	CALL	J
	JSR	PC,J
	.ENDM


;INTERRUPT VECTORS

	.=4
	NEXM			;NON-EXISTANT MEMORY
	HGHPRI

	.=24
	PWRFAL			;POWER FAIL
	HGHPRI



	.=KEYVEC
	KEYINT			;KEYBOARD INPUT
	HGHPRI


	.=CLKVEC
	CLKINT			;CLOCK
	HGHPRI

	.=TENVEC
	TENINT			;PDP-10 INPUT
	HGHPRI

	.=STPVEC
	STPINT			;DISPLAY STOP
	GTPRI
	LPINT			;LIGHT PEN
	GTPRI
	TIMINT			;TIME OUT/SHIFT OUT
	GTPRI


	.=400			;START OF PROGRAM

	.=.+SSIZE		;START WITH MAIN STACK
	STACK=.


START:	RESET			;RESET ALL DEVICES
	RESET
	RESET
	MOVB	#CONC,@#TENOUT+2	;STOP LOADER
	MOV	#16,@#TENIN		;DISABLE INTERRUPTS
	CLR	@#KEYIN
	CLR	@#TENOUT
RSET:	MOV	#STACK,SP	;SET UP STACK
	CLR	TEMP		;STOP CLOCK BY PUTTING 0,
	CALL	NOCLK		;INTO DEVICE REGISTER
	MOV	#40,SCROLL
	MOV	#110,CHARS	;START WITH 72 CHAR.S PER LINE
	;START WITH 40 LINES OF SCROLLING
	MOV	PAGES,LAYP	;AND A FILL CORE WITH PAGES 100 LONG
	CLR	LAYT		;AND NO TABLES,
	CLR	LAYG		;OR GRAPHS
	CLR	LAYF		;OR FIGURES
	CLR	LAYT+2		;LATIN MODE
	;MOV	KSIZE,ARG1	;ARG1 CONTAINS ADDR. OF INDEX START	**NEW**
	CALL	SETUP		;NOW SETUP THE SYSTEM THIS WAY
	CLR	MODE		;INITIALIZE MODE WORD
	MOV	GSTART,HITADR	;ORIGINAL L.P. HIT AT PICTURE 0,
	ADD	#14,HITADR	;LINE 0
	MOV	#117,@#TENIN	;ENABLE INTERRUPTS
	MOV	#101,@#KEYIN
	BIC	#HGHPRI,STATUS	;PUT US IN LOW GEAR
	MOV	#DFILE,GTPC	;AND START THE DISPLAY
	TSTB	@MESPTR		;IF MESSAGE WAITING,
	BNE	MAININ		;PRINT IT,
	MOV	#MES1,MESPTR	;ELSE, PRINT RESET MESSAGE
;MAININ GETS THE NEXT CHARACTER.  ON A CONTROL G , IT DISPLATCHES TO GRAPHICS.
;ON A CONTROL CHARACTER IT DISPATCHES TO THE CORRECT SUBROUTINE OR
;IF NO SUBROUTINE, IGNORES THE CHARACTER.  AND ON A PRINTING CHARACTER,
;IT ENTERS THE CHARACTER IN THE CORRECT BUFFER AS POINTED TO BY
;CURLIN AND INPTR.
MAININ:	CALL	GETCAR		;GET A CHAR FROM THE BUFFER
	CMPB	CHAR,#40
	BLT	CONTRO		;YES, PROCESS CONTROL CHAR
	CMPB	CHAR,#177	;TEST FOR RUBOUT
	BEQ	MAININ		;AND IGNORE IT
	CALL	PRINT		;ELSE, INSERT THE CHARACTER IN THE BUFFUR
	BR	MAININ		;THEN GO GET NEXT CHAR
CONTRO:	CLR	TEMP			;USE TEMP AS OFFSET IN TABLE OF CHARS
CONLOP:	CMPB	CHAR,CONTAB(TEMP)	;AND LOOK FOR A MATCH
	BEQ	CONDUN		;IF FOUND, DISPATCH
	TSTB	(TEMP)+		;POINT TO NEXT ENTRY
	TSTB	CONTAB(TEMP)	;0 TERMINATES TABLE
	BNE	CONLOP		;WHEN 0 ENCOUNTERED,
	BR	MAININ		;IGNORE THIS CHARACTER
CONDUN:	ASL	TEMP	;DOUBLE THE OFFSET INTO THE TABLE
	JSR	PC,@CONGO(TEMP)	;AND USE AS OFFSET INTO SUBROUTINE TABLE
	BR	MAININ		;NOW GET NEXT CHARACTER

CONTAB:	.BYTE 01,04,07,10,11,12,13,14,15,30,31,32,35,36,37,0
	.EVEN
CONGO:	.WORD NOLINE,DRAWIT,BELL,BACKSP,TAB,LINEF,LINEF,FORMF
	.WORD CARRET,FORWSP,BACKSP,UPSP,HOME,EOL,EOS



;PRINT INSERT THE CHARACTER IN CHAR INTO THE CURRENT BUFFER OR IGNORES IT
PRINT:	MOV	INPTR,TEMP		;COMPARE IN-POINTER
	SUB	@CURLIN,TEMP		;WITH START OF LINE
	SUB	#2,TEMP			;IGNORE CRLF WORD IN LINE
	CMP	TEMP,CHARS		;IF THIS CHAR. WOULD GO BEYOND LINE,
	BGE	NOPR			;IGNORE IT
	CMP	TEMP,#100		;IF 64TH CHARACTER,
	BNE	NOBLE
	MOV	#1,GTSTAT		;RING ZEE BELL
NOBLE:	MOVB	CHAR,(INPTR)+		;ENTER THE CHARACTER
PRINT0:	ADD	#16,CURX		;AND MOVE OVER THE CURSOR
NOPR:	RTS	PC		;THEN RETURN



;CONTROL CHARACTER ROUTINES


;CARRET HANDLES CARRIAGE RETURNS

CARRET:	MOV	@CURLIN,INPTR	;RESET IN-PTR TO START OF LINE
	TST	(INPTR)+	;BEYOND THE FIRST CRLF
	CLR	CURX		;SET CURSOR TO START OF LINE
	RTS	PC


;LINEF HANDLES LINEFEEDS
;WHEN IT RECEIVES A LINE FEED WITH THE BOTTOM LINE CURRENT,
;IT PULLS THE ADDRESS OF THE TOP LINE OUT OF THE ROLL
;MOVES ALL OTHER ADDRESSES UP ONE
;ZEROES OUT THE FORMER TOP LINE AND PLACES ITS ADDRESS
;IN THE BOTTOM LINE OF THE ROLL

LINEF:	CMP	CURLIN,LASLIN	;ON LAST LINE?
	BGE	UPIT		;THEN SCROLL
	SUB	@CURLIN,INPTR	;MAKE INPTR AN OFFSET FROM START OF LINE
	ADD	#4,CURLIN	;MAKE CURLIN POINT TO NEXT SLOT
	CALL	PAD		;PAD BLANKS TILL OFFSET;INPTR COMES BACK CORRECT
	SUB	#30,CURY	;MOVE CURSOR DOWN
	RTS	PC
UPIT:	SUB	@CURLIN,INPTR	;MAKE INPTR INTO OFFSET
	MOV	TTY0+2,TEMP	;SAVE ADDRESS OF TOP LINE FROM ROLL
	MOV	#TTY0+2,ARG1	;GET ADDRESSES OF TOP TWO LINES
	MOV	#TTY0+6,ARG2	;AND USE THESE AS POINTERS
UPLOOP:	CMP	ARG2,LASLIN	;LAST LINE?
	BGT	SCROLD		;YES, STOP SCROLLING
	MOV	(ARG2)+,(ARG1)+	;MOVE EACH ADDRESS UP ONE
	CMP	(ARG2)+,(ARG1)+	;SKIPPING THE STOP
	BR	UPLOOP
SCROLD:	MOV	TEMP,(ARG1)	;THEN MOVE ORIGINAL TOP LINE IN
	CALL	ZIPLIN		;ZERO IT OUT
	CALL	PAD		;PAD TILL LAST INPTR OFFSET
	RTS	PC


;UPSP MOVES THE CURSOR AND THE INPTR TO THE PREVIOUS LINE IF ONE EXISTS.

UPSP:	CMP	CURLIN,#TTY0+2	;IF CURRENT LINE THE TOP OF THE ROLL,
	BLE	DUNUP		;DO NOTHING
	SUB	@CURLIN,INPTR	;OTHERWISE MAKE INPTR AN OFFSET
	SUB	#4,CURLIN	;POINT CURLIN TO PREVIOUS LINE
	ADD	#30,CURY	;MOVE THE CURSOR UP BUT NOT ACROSS
	CALL	PAD		;AND PAD BLANKS, IF NEEDED, ON THE PREVIOUS LINE
DUNUP:	RTS	PC		;INPTR NOW POINTS IN PREVIOUS LINE


;FORWSP MOVES THE CURSOR AND THE INPTR FORWARD WITHOUT AFFECTING
;CHARACTERS ON THE LINE

FORWSP:	TSTB	(INPTR)		;TEST FOR NO CHARACTER IN NEXT SLOT
	BLE	BLANK		;IF NONE, INSERT A BLANK
	INC	INPTR		;ELSE MOVE THE INPTR,
	CALL	PRINT0		;AND THE CURSOR (NO BELL)
	RTS	PC
BLANK:	MOV	#40,CHAR
	CALL	PRINT		;ENTER CHARACTER-IN CODE
	RTS	PC


TAB:	MOV	INPTR,ARG1	;CALCULATE CURRENT OFFSET
	SUB	#2,ARG1		;FROM CRLF WORD
	SUB	@CURLIN,ARG1
TABS:	CALL	BLANK		;INSERT A SPACE
	INC	ARG1		;INCREMENT COUNTER
	BIC	#177770,ARG1	;AND IF COUNTER NOT MOD 8,
	BNE	TABS		;DO ANOTHER BLANK
	RTS	PC		;ELSE, QUIT

;HOME SETS THE INPTR AND THE CURSOR TO THE UPPER LEFT OF THE SCREEN


HOME:	MOV	#TTY0+2,CURLIN	;MAKE TOP LINE CURRENT
	MOV	@CURLIN,INPTR	;POINT INPTR JUST PAST CRLF
	TST	(INPTR)+
	CLR	CURX		;SET THE CURSOR TO UPPER LEFT
	MOV	#1350,CURY
	RTS	PC


;BACKSP MOVES THE INPTR AND THE CURSOR BACK ONE CHARACTER

BACKSP:	SUB	#2,INPTR	;TEST FOR AT START OF LINE
	CMP	INPTR,@CURLIN
	BLE	ATLEFT		;IF SO, DO NOTHING
	DEC	INPTR		;ELSE MOVE BACK THE INPOINTER
	SUB	#16,CURX	;AND THE CURSOR
ATLEFT:	ADD	#2,INPTR	;NOW UNDO PREVIOUS SUBTRACTION
	RTS	PC		;AND RETURN TO MAIN



;EOL ERASES TO THE END OF THE CURRENT LINE

EOL:	MOV	INPTR,TEMP	;GET CURRENT CHAR. POSITION
EOLLOP:	TSTB	(TEMP)		;WHEN LOW BYTE OF DSTP REACHED (A 0),
	BEQ	DUNEOL		;OR 1ST NON-CHARACTER(ALSO 0), QUIT
	CLRB	(TEMP)+		;ELSE, CLEAR A BYTE
	BR	EOLLOP		;AND GO ON
DUNEOL:	RTS	PC


;EOS CLEARS FROM THE CURRENT CHARACTER POSITION TO THE END OF THE 
;SCREEN.

EOS:	CALL	EOL		;FIRST CLEAR REMAINDER OF CURRENT LINE
	MOV	CURLIN,ARG1	;SAVE POSITION OF CURRENT LINE
EOSLOP:	ADD	#4,CURLIN	;THEN ZIP ONE LINE AFTER ANOTHER
	CMP	CURLIN,LASLIN
	BGT	DUNEOS		;UNTIL END OF ROLL
	CALL	ZIPLIN
	BR	EOSLOP
DUNEOS:	MOV	ARG1,CURLIN	;NOW RESOTORE CURRENT LINE POINTER
	RTS	PC


;FORMF DOES A HOME AND ERASE

FORMF:	CALL	HOME		;HOME
	CALL	EOS		;AND ERASE TILL END OF SCREEN
	RTS	PC



;NOLINE IGNORES ALL CHARACTERS UNTIL IT ENCOUNTERS A LINE FEED
;THE USER MAY, THUS, CAUSE PICTURE BOOK TO IGNORE A LINE BY PRECEEDING
;IT WITH A NULL (0)

NOLINE:	CALL	GETCAR		;GET NEXT CHARACTER,
	CMPB	CHAR,#LF	;TILL LF ENCOUNTERED
	BNE	NOLINE
	RTS	PC






;BELL RINGS THE BELL ON ^G (07)

BELL:	MOV	#1,GTSTAT	;WRITING IN STATUS RINGS THE BELL ON ^G
	RTS	PC




;GENERAL VT05 ROUTINES

;GETCAR GETS THE NEXT INPUT CHARACTER
;!CHAR!

GETCAR:	MOVB	@MESPTR,CHAR	;SEE IF MESSAGE WAITING
	BEQ	GETONE		;IF SO,
	INC	MESPTR		;RETURN MESSAGE CHAR AND BUMP POINTER
	RTS	PC
	.IFDF	NOBUF		;THIS CODE USES NO BUFFER
GETONE:	MOV	INCHAR,CHAR	;ELSE,GET THE CHAR FROM STORAGE
	BEQ	GETONE		;IF NONE THERE, WAIT
	BIC	#177600,CHAR	;USE LOW 7 BITS
	CLR	INCHAR		;CLEAR STORAGE
MESIN:	RTS	PC		;RETURN WITH CHAR
	.ENDC
	.IFNDF	NOBUF		;THIS CODE USES A BUFFER
GETONE:	CMP	OUT,IN		;COMPARE POINTERS
	BEQ	GETONE		;AND WAIT FOR INPUT
	MOVB	@OUT,CHAR	;GET THE CHAR.
	INC	OUT		;AND BUMP POINTER
	BIC	#177600,CHAR	;USE 7 LOW BITS
	RTS	PC
	.ENDC



;PUTCAR TAKES THE CHARACTER IN CHAR AND SEND IT TO THE HOST
;STATUS ON RETURN DENOTES SIGN OF CHAR

PUTCAR:	TSTB	@#TENOUT	;WHEN XMIT READY,
	BGE	PUTCAR
	MOVB	CHAR,@#TENOUT+2	;SEND THE CHAR
	RTS	PC



;ZIPLIN ZEROES A TEXT BUFFER
;!TEMP!ARG2!

ZIPLIN:	MOV	@CURLIN,TEMP	;START AT CURRENT LINE
	MOV	#CRLF,(TEMP)+	;START BUFFER WITH CRLF
	MOV	CHARS,ARG2	;CHARS CONTAINS BYTES PER BUFFER
	ASR	ARG2		;CONVERT TO WORDS
ZIPLOP:	CLR	(TEMP)+
	DEC	ARG2
	BGT	ZIPLOP
	MOV	#DSTP,(TEMP)+	;END WITH STOP 0
	CLR	(TEMP)+
	RTS	PC



;PAD PADS BLANKS STARTING AT THE INPTR WHICH COMES DOWN AS AN
;OFFSET IN INPTR, BACK TO THE FIRST CHARACTER IN THE CURRENT LINE
;AS POINTED TO BY CURLIN.
;!INPTR!TEMP!

PAD:	ADD	@CURLIN,INPTR	;INPTR SAME OFFSET BUT NEXT LINE
	MOV	INPTR,TEMP	;NOW POINT TO CURRENT CHARACTER POS.
PADLOP:	TSTB	-(TEMP)		;IF PREVIOUS POSITION CONTAINS 0,
	BNE	DUNPAD
	MOVB	#40,(TEMP)	;INSERT A BLANK
	BR	PADLOP		;UNTIL SOME CHARACTER OR THE CRLF PAIR,
DUNPAD:	RTS	PC		;REACHED







;GRAPHICS ROUTINES


;DRAWIT PICKS UP THE ID CHARACTER THEN DISPLATCHES TO THE PROPER
;ROUTINE

DRAWIT:	CALL	GETCAR		;GET THE ID CHAR.
	MOV	CHAR,TEMP	;USE IT AS OFFSET, BUT SAVE FOR ROUTINES
	ASLB	TEMP		;*2
	BPL	DRAWIT		;IF LESS THAN ALPHABET, IGNORE IT
NOTLOW:	BICB	#200,TEMP	;MAKE POS. NOW
	CMPB	TEMP,#64	;IF BEYOND ALPHABET,
	BGT	BADID		;BAD ID
	JSR	PC,@IDS(TEMP)	;ELSE OK, DISPATCH
BADID:	RTS	PC


;THE ID TABLE CONTAINS A DESCRIPTION OF THE ROUTINE, THE REASON FOR
;CHOOSING THE PARTICULAR LETTER CODE, AND THE NAME OF THE FORTRAN
;SUBROUTINE THAT CORRESPONDS TO EACH ENTRY

	IDS=.			;START OF ID TABLE

	IOTA	;@(AT), START, READ OR STOP THE CLOCK: IOTA
	OLINE	;A(AXIS) MARK A GRAPH, MARKG
	BITS	;B(BITS), SET MODE: BITS
	SUBP	;C,(CALL), CALL A PAGE: PICUTURE,FIGURE,TABLE,GRAPH
	DOT	;D(DOT), ABSOLUTE POINT: DOT
	ERASE	;E(ERASE), ERASE A PAGE: ERASEP,ERASEF,ERASEG,ERASET
	OPAGE	;F(FIGURE), OPEN A FIGURE: OPENF
	OPAGE	;G(GRAPH), OPEN A GRAPH: OPENG
	HIT	;H(HIT), LIGHT PEN HIT: HIT
	OLINE	;I(INCH), MARK A FIGURE: MARKF
	JOT	;J(JOT), WRITE IN A FIGURE: JOT
	OLINE	;K(KARACHTER), MARK A TABLE: MARKT
	OLINE	;L(LINE), MARK A PICTURE: MARKP
	MOVE	;M(MOVE), INVISIBLE VECTOR: MOVE
	NOJOT	;N(NOJOT), WRITE INVISIBLY IN A FIGURE: NOJOT
	LAYOUT	;O(OPEN), LAYOUT THE BOOK: LAYOUT
	OPAGE	;P(PICTURE), OPEN A PICTURE: OPENP
	TEXT	;Q,(QUOTE), INSERT A CHARACTER: TEXT
	RSET	;R(RESET), RESET THE BOOK: THEEND
	SET	;S(SET), INVISIBLE VECTOR: SET
	OPAGE	;T(TABLE), OPEN A TABLE
	UNHIT	;U(UNHIT), WAIT FOR L.P. HIT BEFORE RETURNING
	VECTOR	;V(VECTOR), VECTOR: VECTOR
	PUTNUM	;W(WAIT), WAIT TILL THIS COMMAND EXECUTES: WAIT
	READX	;X(X), READ X-COORDINATE: READX
	READY	;Y(Y), READ Y-COORDINATE: READY
	PLOT	;Z(X OR Y), PLOT A POINT: PLOT



;LAYOUT SETS UP THE BOOK.
;IT SETS THE AMOUNT OF LINE TO SCROLL. THEN
;IT READS PAGE NUMBER AND LINE NUMBER INTO THE LAYOUT TABLE A BYTE
;AT A TIME.
;O+9*N

;LAYOUT:	MOV	#173000,TTY0	;INSERT NON-INTERRUPT STOP IN ROLL
;STPLOP:	CMP	GTPC,#TTY0+2	;AND WAIT FOR THIS STOP
;	BNE	STPLOP
LAYOUT:	CALL	GETCAR		;GET AMOUNT TO SCROLL
	MOV	CHAR,SCROLL
	CALL	GETCAR		;GET WORDS PER BUFFER
	ASL	CHAR		;*2 FOR BYTES
	MOV	CHAR,CHARS	;AND SAVE
	MOV	#LAYTAB,TEMP	;NOW ENTER ALL SIZES IN LAYOUT TABLE
LAYLOP:	CALL	GETCAR		;PAGES IN LO BYTES, LINES IN HI
	MOVB	CHAR,(TEMP)+	;PICTURES,FIGURES,GRAPHS,THEN TABLES
	CMP	TEMP,#LAYT+3	;INCLUDING GREEK OR LATIN MODE
	BLT	LAYLOP
	CALL	SETUP		;NOW SETUP THE BOOK
	MOV	CHAR,ARG1	;SAVE CHAR TO TEST SIGN
	BIC	#160000,CHAR	;MOD 4096
	TST	ARG1		;IF IT WAS NEGATIVE, THEN HAVE
	BPL	LAYPLS		;TO SET BIT 13 FOR INFORM
	BIS	#20000,CHAR	;SUBROUTINE TO WORK PROPERLY.
LAYPLS:	CALL	INFORM		;PUT OVERLAP IN COORDINATE FORM
	CALL	PUTCO		;SEND OUT THE OVERLAP
	TST	ARG1		;IF BAD LAYOUT (NEG. RETURN),
	BGE	LAYDUN
	JMP	RSET		;RESET THE BOOK
LAYDUN:	MOV	#DFILE,GTPC	;START THE DISPLAY
	CLR	STATUS		;ALLOW DISPLAY INTERRUPTS
	RTS	PC



;OPAGE OPENS A PAGE OF A GIVEN TYPE
;IT DOES SO BY ENTERING ITS ADDRESS IN THE OPEN TABLE.
;IT GETS THIS ADDRESS FROM THE INDEX
;IT IGNORES NON-EXISTANT PAGES
;P,G,T, OR F+N

OPAGE:	CALL	OFFSET+4	;GET OFFSET INTO OTABLE
	MOV	CONTS(ARG1),TEMP	;GET START OF THIS TYPE FROM T.O.C.
	CALL	GETCAR		;GET PAGE NUMBER
	CMPB	CHAR,LAYTAB(ARG1)	;IF HIGHER THAN PAGES AVAILABLE
	BGT	NODO		;IGNORE
	ASL	CHAR		;*4 FOR OFFSET INTO INDEX
	ASL	CHAR
	SUB	CHAR,TEMP	;POINTS TO INDEX ENTRY
	MOV	TEMP,OTABLE(ARG1)	;NOW ENTER PAGE'S ADDR. INTO OTABLE
NODO:	RTS	PC		;NOUGHT ELSE



;OLINE OPENS A LINE ON A PAGE.
;IT ENTERS ITS ADDRESS IN THE MARKER TABLE, FINDING THE ADDRESS
;BY ADDING THE LINE OFFSET TO THE ADDRESS IN THE OPEN TABLE.
;LINE OFFSET=LINE*6 FOR PICTURE,LINE*2 FOR GRAPH OR FIGURE,
;LINE*1 FOR TABLE
;IT READS LINE NUMBER MOD 128, IGNORING NEGATIVITY
;A LINE NUMBER BEYOND PAGE TYPE SETS MARKER FOR OPEN PAGE TO 0
;(L,A,K, OR I +N)

OLINE:	CALL	OFFSET+4	;ARG1 WILL CONTAIN OFFSET INTO OTAB
	CALL	LINOFF		;GET LINE OFFSET INTO ARG2
	MOV	OTABLE(ARG1),TEMP	;GET ADDRESS OF INDEX ENTRY
TOOBAD:	MOV	(TEMP),-(TEMP)	;MAKE MARKER ENTRY EQUAL TO IT
	ADD	ARG2,(TEMP)	;THEN OFFSET THE MARKER
	CLR	ARG2
	CMP	(TEMP)+,MARGS(ARG1)	;TEST FOR MARKER BEYOND IT,
	BGE	TOOBAD		;IF SO,SET MARKER TO START OF PAGE
	RTS	PC



;OFFSET RETURNS 0,2,4,6 IN ARG1 FOR P OR L, F OR I, T OR K, G OR A
;RESPECTIVELY, THE OFFSET INTO THE TABLE OF CONTENTS(T.O.C.) AND
;THE LAYOUT TABLE.  ARG1 WILL CONTAIN THIS OFFSET.
;!ARG1!

OFFSET:	CALL	GETCAR		;GET THE ID
	MOV	#7,ARG1		;START THE OFFSET RETURN REGISTER
OFFLOP:	CMPB	CHAR,OFFIDS(ARG1)	;FIND A MATCH
	BEQ	OFF
	DEC	ARG1		;ELSE GO BACK A BYTE
	BGE	OFFLOP
NOFF:	TST	(SP)+		;IF NO MATCH KLUDGE AN RTS AND RETURN TO FIRST CALLER
OFF:	BIC	#177771,ARG1		;NOW MAKE ARG1 EVEN
	RTS	PC
OFFIDS:	.BYTE	'P,'L,'F,'I,'G,'A,'T,'K		;IDS
				;PAIR FOR PICTURE, FIGURE, GRAPH, TABLE



;BITS SETS BITS IN MODE CORRESPONDING TO THE VARIOUS MODES AVAILABLE
;ON THE GT40. EACH LINE THAT ENTERS A PICTURE
;USES THESE BITS IN WORD 0, ADDING ON THE BITS THAT DETERMINE
;THE TYPE OF GRAPHIC DATA IN THE LINE.
;(B+4*N)

BITS:	CLR	MODE		;GET RID OF LAST MODE
	CALL	GETCAR		;SET BLINK-NESS 
	ROL	CHAR		;TEST FOR BIT 6 SET,
	ASRB	CHAR		;INDICATING NEGATIVE VALUE
	BMI	NOB		;IN WHICH CASE, NO-BLINK ENABLE
	BEQ	STEADY		;IF 0, NO BLINK ENABLED
	BIS	#10,MODE	;ELSE BLINK
STEADY:	BIS	#20,MODE	;SET ENABLE BIT
NOB:	CALL	GETCAR		;GET INTENSITY
	ROL	CHAR		;ON NEGATIVE ARG,
	ASRB	CHAR
	BMI	NOI		;NO ENABLE
	SWAB	CHAR		;ELSE PUT THE BITS INTO THE MODE WORD
	ROR	CHAR
	BIS	#2000,CHAR	;ENABLE THEM
	BIC	#174177,CHAR	;AND MAKE SURE NO OVERFLOW (MODULO 8)
	BIS	CHAR,MODE	;NOW ENTER THEM
NOI:	CALL	GETCAR		;GET LINE TYPE
	ROL	CHAR
	ASRB	CHAR
	BMI	NOT
	BIS	#4,CHAR		;SET ENABLE BIT IF POSITIVE ARG.
	BIC	#177770,CHAR	;MODULO 4
	BIS	CHAR,MODE
NOT:	CALL	GETCAR		;GET LIGHT PEN SENSITIVITY
	ROL	CHAR
	ASRB	CHAR
	BMI	NOS
	BEQ	DULL
	BIS	#40,MODE	;AND SET PROPER BITS
DULL:	BIS	#100,MODE
NOS:	RTS	PC




;THESE ROUTINES ENTER LINES AND POINTS INTO
;PICTURES.
;VECTOR ADDS A VISIBLE VECTOR
;SET ADDS AN INVISIBLE VECTOR
;DOT ADDS A VISIBLE POINT
;SET ADDS AN INVISIBLE POINT
;(V,M,D OR S)+4*N

SET:	BIS	#DPT,MODE	;SET UP MODE WORD
MOVE:	BIS	#DVEC,MODE	;DITTO
	CLR	ARG1		;VISIBLE BIT OFF
	BR	ENTERP
DOT:	BIS	#DPT,MODE
VECTOR:	BIS	#DVEC,MODE
	MOV	#40000,ARG1	;ALSO SET VISIBLE, INVISIBLE BIT
ENTERP:	CALL	GETNUM		;GET A COORDINATE
	BIS	CHAR,ARG1	;INTO ARG1(WHICH MAY HAVE A BIT SET)
	CALL	GETNUM		;AND ANOTHER,
	MOV	CHAR,ARG2	;INTO ARG2
PICIN:	MOV	OPENP,TEMP	;POINT TEMP TO OPEN PICTURE ENTRY IN INDEX
SUBIN:	CALL	INSERT		;AND INSERT THIS LINE
INFIN:	RTS	PC



;SUBP INSERTS A SUBROUTINE CALL IN THE CURRENT PICTURE, CURRENT LINE
;WORD 0 OF THE LINE CONTAINS THE MODE OF THE SUBPICTURE.
;FOR A PICTURE, MODE IS NOT NEEDED BUT IS VECTOR MODE
;A FIGURE TAKES EITHER RELATIVE POINT MODE OR SHORT VECTOR MODE.
;A TABLE TAKES CHARACTER MODE.
;A GRAPH TAKES EITHER X GRAPH OR Y GRAPH MODE
;WORD 1 CONTAINS THE STOP INSTRUCTION THAT CAUSES AN INTERRUPT.
;WORD 2 CONTAINS THE ADDRESS OF THE LINE CALLED CALCULATED FROM
;THE INDEX ENTRY FOR THE START OF THE PAGE SPECIFIED IN THE ARGUMENT
;FOLLOWING THE ID LETTERS.
;(C+P,V,D,T,X,OR Y+2*N)


SUBP:	CALL	GETCAR		;GET THE ID LETTER(TYPE OF PAGE TO CALL)
	MOV	#5,ARG1		;ARG1 POINT TO A TABLE
TYPLOP:	CMPB	CHAR,TYPIDS(ARG1)
	BEQ	TYPIT		;GET OFFSET INTO ID TABLE,
	DEC	ARG1
	BGE	TYPLOP		;TO CALCULATE MODE OF CALL
	BR	NOFF		;IF NO MATCH, RETURN TO MAIN CALLER
TYPIT:	BISB	TYPES(ARG1),MODE+1	;ENTER HIGH BITS IN MODE WORD
	INC	ARG1		;NOW CHANGE ARG1 INTO AN OFFSET FOR
	BIC	#177771,ARG1		;THE TABLE OF CONTENTS
	CALL	LINADR		;GET ADDRESS OF LINE INTO ARG2
	CMP	ARG2,MARGS(ARG1)	;IF ADDRESS BEYOND CHAPTER,
	BGE	INFIN		;IGNORE CALL
	BIC	#1,ARG2		;MAKE SURE EVEN ADDRESS (TABLE SOMETIMES ODD)
	MOV	#DSTP+ITALIC,ARG1	;SET UP ARG1 WITH WORD 1 OF LINE
	MOV	OPENP,TEMP	;COMPARE ADDRESS OF CALL WITH
	TST	-(TEMP)
	CMP	ARG2,(TEMP)+	;ADDRESS OF INSERTION
	BLE	INFIN		;IF NOT GREATER, IGNORE REQUEST
	BR	SUBIN		;ELSE INSERT IT

TYPIDS:	.BYTE	'P,'V,'D,'X,'Y,'T	;SECOND ID LETTERS

TYPES:	.BYTE	DVEC/400,DRELV/400,DRELP/400	;MODE BITS FOR WORD 0
	.BYTE	DGRAY/400,DGRAX/400,DCHR/400





;ERASE ERASES THE CURRENTLY OPEN PAGE STARTING
;AT THE CURRENT LINE BY ADDING DNOP'S UNTIL IT ENCOUNTERS A STOP 0.
;THIS MAY CAUSE A TIME OUT WHEN DNOP-ING THE ADDRESS OF A SUBROUTINE CALL.
;THE TIME-OUT ROUTINE SIMPLY STARTS THE DISPLAY AT THE TOP
;OF THE DISPLAY FILE MAKING THE ERROR UNNOTICEABLE.
;(E+P,F,G OR T)

ERASE:	CALL	OFFSET		;GET OFFSET INTO OTABLE
	MOV	OTABLE(ARG1),ARG2	;CALCULATE ADDRESS,
	MOV	-(ARG2),TEMP		;OF OPEN LINE
ERSLOP:	CMP	(TEMP)+,#DSTP		;WHEN STOP-NOP REACHED,
	BNE	NOTEND
	CMP	(TEMP),#DNOP
	BNE	NOTEND
	RTS	PC			;QUIT
NOTEND:	MOV	#DNOP,-(TEMP)		;ELSE, DNOP ANOTHER WORD
	TST	(TEMP)+
	BR	ERSLOP




;PLOT INSERTS THE NEXT TWO BYTE VALUE INPUT INTO THE CURRENT GRAPH
;IN THE LINE POINTED TO BY THE MARKER


PLOT:	MOV	OPENG,ARG1		;GET POINTER TO INDEX ENTRY
	CALL	GETNUM		;GET COORDINATE
	BIT	#20000,CHAR	;TEST FOR NEGATIVE VALUE
	BEQ	LOT
	BICB	#300,CHAR	;IF SO, USE LOW 6 BITS A NEW GRAPH INCR.
	MOV	#DELTAZ,DELTA	;FIRST INSERT 0 INCREMENT WORD IN FILE
	BISB	CHAR,DELTA	;THEN SET NEW INCREMENT
	RTS	PC
LOT:	CMP	-(ARG1),ENDG	;IF MARKER BEYOND END OF GRAPH CHAPTER
HOT:	BLT	OT
REMARK:	TST	(ARG1)+		;GET ADDRESS OF START OF PAGE
	MOV	(ARG1),-(ARG1)	;AND INSERT IT IN THE MARKER
OT:	MOV	(ARG1),ARG2		;GET LINE ADDRESS FROM MARKER
	MOV	CHAR,(ARG2)+		;INSERT THE COORDINATE
	MOV	ARG2,(ARG1)		;INCREASE THE MARKER
	RTS	PC

;JOT INSERTS THE NEXT TWO BYTE BALUE INPUT INTO THE CURRENT FIGURE
;IN THE LINE POINTED TO BY THE MARKER
;(J+2*N)
;NOJOT INSERTS AN INVISIBLE JOT
;(N+2*N)

NOJOT:	CLR	-(SP)		;PUSH INVISIBLITY
	BR	OJOT
JOT:	MOV	#40000,-(SP)	;PUSH VISIBILITY
OJOT:	CALL	GETCO		;GET X COORDINATE,7 BITS
	SWAB	CHAR		;SHIFT THESE BITS LEFT 7
	ROR	CHAR
	MOV	CHAR,ARG2	;AND SAVE
	CALL	GETCO		;GET Y-COORD
	BIS	ARG2,CHAR	;AND PUT TOGETHER
	BIS	(SP)+,CHAR	;SET VIS-INVIS BIT FROM STACK
	MOV	OPENF,ARG1	;SET UP ARG1 WITH CURRENT FIGURE
	CMP	-(ARG1),ENDF	;TEST FOR BEYOND CHAPTER
	BR	HOT		;AND INSERT THIS WORD IF NOT


;GETCO GETS A 7 BIT COORDINATE MAKING SURE
;IT HAS THE NEGATIVE BIT SET IF NEGATIVE AND PROPER FORMAT
;!CHAR!

GETCO:	CALL	GETCAR		;GET COORD
	ASLB	CHAR		;IF NEGATIVE,
	ASRB	CHAR
	BPL	NOTMI
	NEGB	CHAR		;NEGATE TO GET POSITIVE VALUE
	BISB	#100,CHAR	;AND SET NEG. BIT TO INDICATE DIRECTION
NOTMI:	RTS	PC



;TEXT ENTERS CHARACTERS IN THE CURRENT TABLE.
;IT WILL ENTER ONE CHARACTER IN THE NEXT AVAILABLE BYTE, EITHER
;A REGULAR OR SPECIAL CHARACTER.  IT WILL CLEAR THE ODD BYTE OF
;A CONTROL WORD

TEXT:	MOV	OPENT,ARG1	;POINT TO INDEX ENTRY
	MOV	-(ARG1),ARG2	;AND TO NEXT FREE BYTE
	CALL	GETCAR		;GET NUMBER OF CHARACTERS TO FOLLOW
	MOV	CHAR,TEMP	;SAVE AS COUNTER
TEXLOP:	CALL	GETCAR		;GET A CHARACTER
	CMPB	CHAR,#40	;IGNORE CONTROL CHARACTERS
	BLT	TEXLOP
	TSTB	LAYT+2		;IF IN GREEK MODE,
	BEQ	INLAT
	BICB	#340,CHAR	;USE LOW 5 BITS
	CMPB	CHAR,#SHIN	;IGNORING SHIFT-IN
	BEQ	NOSEE
INLAT:	MOVB	CHAR,(ARG2)+	;NOW ENTER THE CHARACTER
	TSTB	(ARG2)		;AND IF ODD BYTE,
	BGE	EVEN		;OF A CONTROL WORD (DNOP OR DSTP)
	CLRB	(ARG2)		;CLEAR IT TO SHOW CHAR. IN LOW BYTE
EVEN:	CMP	ARG2,ENDT	;IF POINTER POINTS TO MARGIN
	BLT	SKIM
	MOV	@OPENT,ARG2	;POINT IT TO START OF TABLE
SKIM:	MOV	ARG2,(ARG1)	;THEN UPDATE THE MARKER
NOSEE:	DEC	TEMP		;COUNT A CHARACTER
	BGT	TEXLOP		;AND GET ANOTHER , IF NECESSARY
	RTS	PC		;AND GO BACK


;READX AND READY RETURN THE X AND Y COORDINATE RESPECTIVELY OF
;THE PICTURE LINE SPECIFIED IN THE NEXT TWO INPUT ARGUMENTS.

READX:	MOV	#5712,XORY	;ON X-CO, DON'T AUTO-INCREMENT
	BR	READXY
READY:	MOV	#5722,XORY	;ON Y-CO, DO AUTO-INCREMENT
READXY:	CLR	ARG1		;SET UP OFFSET INTO T.O.C.
	CALL	LINADR		;GET ADDRESS INTO ARG2
	CMP	ARG2,@CHAFIG	;TEST FOR ADDRESS BEYOND PICTURES
	BGE	NONO	;IF SO SEND BACK 0
	TST	(ARG2)+		;POINT IT TO WORD 1
XORY:	TST	(ARG2)		;TEST FOR CONTROL WORD THERE
	BGE	NOTSUB
NONO:	MOV	#177777,CHAR		;IF SO, RETURN -4095
	BR	NOCOS
NOTSUB:	MOV	(ARG2),CHAR	;ELSE RETURN THE X OR Y CO. DEPENDING,
NOCOS:	CALL	PUTCO		;ON WHETHER 'XORY' POPPED POINTER OR NOT
	RTS	PC


	.IFDF	OLDWAY
;PUTNUM SENDS OUT THE 14 BIT VALUE IN CHAR.
;IT WILL SEND IT OUT AS A 14 BIT VALUE RATHER THAN IN THE
;GT40 FORMAT IT RECEIVES WHICH INCLUDES A NEGATIVE BIT AND A DELTA VALUE
;!CHAR!ARG1!

PUTCO:	MOV	CHAR,ARG1	;TEST THE VALUE
	BIT	#2000,ARG1	;FOR NEGATIVE
	BEQ	PUTNUM
	NEG	CHAR		;IF SO MAKE IT A POSITIVE OFFSET,
	BIC	#160000,CHAR
	BIS	ARG1,CHAR	;WITH NEGATIVE BIT SET
PUTNUM:	SWAB	CHAR
	CALL	PUTCAR		;THEN OUTPUT IT,
	SWAB	CHAR		;A BYTE AT A TIME
	CALL	PUTCAR		;HIGH BYTE FIRST
	RTS	PC
	.ENDC


;PUTCO OUTPUTS A COORDINATE
;PUTNUM OUTPUTS THE VALUE IN CHAR AS A 4 DIGIT OCTAL NUMBER
;!CHAR!ARG2!

PUTCO:	BIT	#20000,CHAR	;IF NEG. BIT SET IN COORD.,
	BEQ	PUTNUM
	MOVB	#MINUS,@#TENOUT+2	;OUTPUT A MINUS SIGN
PUTNUM:	MOV	#CR,-(SP)	;PUSH THE FINAL CR ONTO THE STACK
	MOV	#4,ARG2		;SET UP COUNTER
STACH:	MOV	CHAR,-(SP)	;PUSH CHAR,
	BIC	#177770,(SP)	;AND MAKE LOW 3 BITS INTO ASCII DIGIT
	BIS	#60,(SP)
	ROR	CHAR		;ROTATE NEXT DIGIT INTO LOW 3 BITS
	ROR	CHAR
	ROR	CHAR
	DEC	ARG2
	BGT	STACH		;AND DO 4 DIGITS
	MOV	#5,ARG2		;THEN OUTPUT 5 CHARACTERS
POPLOP:	MOV	(SP)+,CHAR
	CALL	PUTCAR
	DEC	ARG2
	BGT	POPLOP
	JSR	PC,NOLINE	;NOW IGNORE TILL THE LF ECHO
	RTS	PC







;HIT RETURNS THE PAGE AND LINE OF THE LAST LIGHT PEN HIT
;IT DOES SO BY CALCULATING THESE VALUES FROM THE CONTENTS OF
;'HITADR' INTO WHICH THE LIGHT PEN INTERRUPT ROUTINE PLACES THE
;ADDRESS+6 OF THE LAST HIT
;(H)

;UNHIT FIRST WAITS FOR A LIGHT PEN HIT BEFORE RETURNING ITS ADDRESS
;(W)

UNHIT:	CLR	HITADR		;CLEAR ADDR. TO CAUSE WAIT FOR NEXT HIT
NOHIT:	TST	HITADR		;WAIT TILL HIT ADDR. SET BY LPINT
	BEQ	NOHIT
HIT:	CLR	CHAR
	MOV	CHAPIC,ARG1		;GET ADDRESS OF 1ST INDEX ENTRY
	CMP	(ARG1)+,(ARG1)+		;START POINTER BELOW START OF INDEX
HITLOP:	INC	CHAR			;AND COUNT PAGES
	CMP	-(ARG1),-(ARG1)		;POINTER TO PAGE ADDRESS IN INDEX
	CMP	(ARG1),HITADR		;WHEN ADDRESS EXCEEDED,
	BLE	HITLOP
	SUB	#2,CHAR			;SET THE COUNTER TO THE PREVIOUS PAGE
	CALL	PUTNUM			;AND SEND OUT THIS NUMBER
	MOV	HITADR,TEMP
	CMP	(ARG1)+,(ARG1)+	;POINT TO PREVIOUS INDEX ENTRY
	SUB	(ARG1),TEMP	;SUBTRACT IT FROM THE HIT ADDRESS
	ASR	TEMP		;DIVIDE BY 2 TO GET (LINE+1)*3
	CLR	CHAR		;SET A COUNTER TO 0
TRILOP:	MOV	CHAR,ARG2	;MULT. COUNTER BY 3
	ASL	ARG2
	ADD	CHAR,ARG2
	INC	CHAR
	CMP	ARG2,TEMP	;AND COMPARE IT TO THE HIT OFFSET
	BLT	TRILOP		;UNTIL IT EXCEEDS THIS OFFSET
	SUB	#2,CHAR		;THEN SET THE COUNTER BACK 2
	CALL	PUTNUM		;AND SEND OUT THE LINE NUMBER
	RTS	PC



;IOTA STARTS THE CLOCK FOR ARG>0, READS THE TIMER FOR ARG=0,
;AND STOPS THE CLOCK FOR ARG<0
;(@)

IOTA:	CALL	GETCAR		;GET THE ARGUMENT
	CLR	TEMP
	ROLB	CHAR		;FOR ARG<0,
	BMI	NOCLK		;STOP THE CLOCK
	BEQ	GETIME		;FOR =0, RETURN THE TIME
	MOV	#300,TEMP		;FOR >0, START THE CLOCK
NOCLK:	CLR	TIMER		;SET TIMER TO 0
	MOV	TEMP,@#CLKOUT
	RTS	PC
GETIME:	MOV	TIMER,CHAR
	CALL	PUTNUM		;SEND TIME AS A POSITIVE VALUE, MOD 4096
	RTS	PC





;INSERT INSERTS LINES INTO PICTURES.
;IT PUTS A NON-INTERRUPT STOP IN WORD 1 OF THE LINE, INSERTS DATA,
;THEN CHECKS FOR GTPC STOPPED.  IF STOPPED, IT RESTARTS IT AT WORD 1.
;MODE MUST CONTAIN THE MODE.
;ARG1 AND ARG2 SHOULD CONTAIN WORDS 2 AND 3
;TEMP MUST CONTAIN A POINTER TO THE INDEX ENTRY.
;!TEMP!ARG1!ARG2!CHAR!


INSERT:	MOV	-(TEMP),CHAR	;GET ADDRESS OF LINE FROM MARKER
	MOV	#173000,(CHAR)+	;INSERT NON-INTERRUPT STOP
	MOV	ARG1,(CHAR)+	;INSERT X OR DSTP IN WORD 2
	MOV	ARG2,(CHAR)	;INSERT Y OR ADDRESS IN WORD 3
	SUB	#4,CHAR
	MOV	MODE,(CHAR)+	;INSERT MODE OVER STOP
	CLR	MODE		;AND CLEAR MODE FOR NEXT USE
;GTGO:	CMP	GTPC,CHAR	;GTPC POINTING JUST PAST STOP?
;	BNE	NOSTOP		;NO, NO NEED TO RESTART
;	CMP	GTPC,CHAR	;YES. STILL THERE NOW?
;	BNE	NOSTOP		;NO, COINCIDENCE
GTGO:	TST	GTSTAT		;TEST FOR DISPLAY STOPPED
	BGE	NOSTOP
	CMP	GTPC,CHAR	;IF SO, STOPPED HERE?
	BNE	NOSTOP
	SUB	#2,GTPC		;YES, START GT AT WORD 0 OF LINE
NOSTOP:	ADD	#6,(TEMP)	;POINT MARKER TO NEXT LINE
	CMP	(TEMP)+,ENDP	;TEST FOR BEYOND PICTURES
	BLT	INPIC
	MOV	(TEMP),-(TEMP)	;IF SO SET MARKER TO START OF PICTURE
INPIC:	RTS	PC



;LINADR RETURNS THE ADDRESS OF THE LINE SPECIFIED BY THE NEXT TWO
;INPUT ARGUMENTS, PAGE AND LINE.
;ARG1 MUST CONTAIN THE PAGE TYPE'S OFFSET INTO THE T.O.C.
;ARG2 WILL RETURN WITH THE ADDRESS OF WORD 0 OF THE LINE
;!CHAR!TEMP!ARG1!ARG2!

LINADR:	MOV	CONTS(ARG1),TEMP	;GET ADDRESS OF INDEX ENTRY OF PAGE 0
	CALL	GETCAR		;GET PAGE NUMBER
	ASL	CHAR		;*4 FOR OFFSET INTO INDEX
	ASL	CHAR
	SUB	CHAR,TEMP	;ADD IT TO INDEX POINTER
	MOV	(TEMP),TEMP	;TEMP NOW POINTS TO START OF PAGE
	CALL	LINOFF		;CALCULATE OFFSET OF THIS LINE FROM START
	ADD	TEMP,ARG2	;ADD START OF PAGE TO THIS OFFSET
	RTS	PC		;RETURN WITH ADDRESS IN ARG2


;LINOFF CALCULATES THE LINE OFFSET DEPENDING UPON THE TYPE OF PAGE
;CALLED.  ARG1 MUST CONTAIN THE OFFSET INTO THE T.O.C..
;ARG2 WILL CONTAIN THE LINE OFFSET SPECIFIED IN THE NEXT INPUT ARG.
;!ARG2!CHAR!

LINOFF:	CALL	GETCAR
	MOV	CHAR,ARG2	;SO DOES ARG2
	TST	ARG1		;IF IN A PICTURE,
	BNE	NOTRI
	ASL	ARG2		;MULT. LINE*3
	ADD	CHAR,ARG2
;NOTRI:	CMP	ARG1,#6		;IF NOT IN A TABLE,
;	BEQ	NOBI
NOTRI:	ASL	ARG2		;MULT. LINE*2
NOBI:	RTS	PC		;RETURN OFFSET IN ARG2




;GETNUM INPUTS A VALUE CONSISTING OF TWO BYTES.
;CHAR WILL CONTAIN THIS VALUE
;!TEMP!CHAR!

GETNUM:	CALL	GETCAR		;GET HIGH BYTE
	SWAB	CHAR
	ASR	CHAR			;OVER 1 BIT TO FIT
	MOV	CHAR,TEMP	;SAVE HI BYTE
	CALL	GETCAR		;AND GET  LOW
	ADD	TEMP,CHAR	;NOW PUT TOGETHER
INFORM:	BIT	#20000,CHAR	;IF 14TH BIT SET (BIT 13)
	BEQ	PLUSB
	NEG	CHAR		;NEGATE AND,
	BIC	#176000,CHAR
	BIS	#20000,CHAR	;SET NEGATIVE BIT
PLUSB:	RTS	PC










;TABLES

;TABLE OF CONTENTS
;THIS TABLE , ONE ENTRY PER PAGE TYPE, POINTS TO THE FIRST ENTRY OF
;EACH PAGE TYPE IN THE INDEX

CONTS=.
CHAPIC:	.WORD	0		;PICTURES
CHAFIG:	.WORD	0		;FIGURES
CHAGRA:	.WORD	0	;GRAPHS
CHATAB:	.WORD	0		;TABLES
ENDCHA:	.WORD	0		;END OF BOOK ADDRESS

;OPEN TABLE
;THIS TABLE POINTS TO THE PAGE IN THE INDEX CURRENTLY OPEN FOR EACH TYPE

OTABLE=.
OPENP:	.WORD	0		;PICTURE
OPENF:	.WORD	0		;FIGURE
OPENG:	.WORD	0		;GRAPH
OPENT:	.WORD	0		;TABLE
CLOSE:	.WORD	0		;END OF BOOK ADDRESS


;MARGIN TABLE
;THIS TABLE HOLDS THE ADDRESSES OF THE LAST STOP FOR EACH PAGE TYPE

	MARGS=.
ENDP:	.WORD	0		;END OF PICTURES
ENDF:	.WORD	0		;END OF FIGURES
ENDG:	.WORD	0		;END OF GRAPHS
ENDT:	.WORD	0		;END OF TABLES(AND OF BOOK)
;LAYOUT TABLE
;THIS TABLE CONTAINS ONE WORD PER PAGE TYPE
;THE LOW BYTE OF EACH WORD CONTAINS THE NUMBER OF PAGES OF THIS TYPE
;THE HIGH BYTE CONTAINS THE NUMBER OF LINES PER PAGE.
;SETUP WILL LOOK IN THIS TABLE TO DETERMINE HOW TO SET UP THE SYSTEM.
;THE ORIGINAL SETUP IS ALL PICTURES

	LAYTAB=.
LAYP:	.WORD	0		;PICTURES
LAYF:	.WORD	0		;FIGURES
LAYG:	.WORD	0		;GRAPHS
LAYT:	.WORD	0		;TABLES
	.WORD	0		;0 MEANS LATIN, NON-0 MEANS GREEK



;SETUP
;SETUP SETS UP THE BOOK.  IT LOOKS IN THE LAYOUT TABLE TO DETERMINE
;HOW MANY OF EACH PAGE TO CREATE AND HOW LONG TO MAKE EACH.  IT LOOKS
;IN THE WORD 'SCROLL' TO DETERMINE HOW MANY LINES OF VT05 TO MAKE.
;ARG1 MUST POINT TO THE END OF THE BOOK
;CHAR WILL RETURN WITH OVERLAP OR UNUSED(POSITIVE MEANS OVERLAP)

SETUP:	CLR	TIMER		;CLEAR TIMER BUT DON'T STOP CLOCK
	BIS	#GTPRI,STATUS	;DISALLOW DISPLAY INTERRUPTS WHILE FIXING CORE
	MOV	KSIZE,ARG1	;ARG1 PTS TO START OF INDEX AT BASE OF CORE
	MOV	SCROLL,CHAR	;GET AMT TO SCROLL
	ASL	CHAR		;*4 TO GET SIZE OF ROLL
	ASL	CHAR
	MOV	#TTY0,INPTR	;GET ADDR. OF START OF FILE
	ADD	CHAR,INPTR	;AND ADD OFFSET TO GET START OF GRAPHICS
	MOV	#LAYTAB-1,SSP	;GET ADDRESS OF LAYOUT TABLE,
	MOV	#CONTS,CHAR	;TABLE OF CONTENTS
	CLR	(INPTR)+	;LEAVE SPACE FOR SHIFT OUT WORD
	CLR	(INPTR)+
	MOV	INPTR,GSTART	;SAVE START OF GRAPHICS FILE
	MOV	#DPT+NOBLI+NOLITE+INT3,(INPTR)+	;START FILE WITH ABS POINT (0,0)
	CLR	(INPTR)+
	CLR	(INPTR)+
;	BR	TYPONE		;LEAVE PICTURE LINES AS IS(LINES+1)
;TYPONE:	NOP			;*****
NEWTYP:	MOV	ARG1,(CHAR)+	;ENTER INDEX LOCATION IN TABLE OF CONTENTS
;	INCB	2(SSP)		;IF SUB-PAGES HAVE 2 MORE LINES THAN SPECIFIED
	MOV	ARG1,10(CHAR)	;AND IN OPEN TABLE THAT FOLLOWS
	TSTB	(SSP)+		;POINT TO NEXT ENTRY IN LAYTAB
	CMP	SSP,#LAYTAB+10	;DONE ALL TYPES YET?
	BGE	DUNPAG		;IF SO, QUIT
	MOVB	(SSP)+,ARG2	;COUNT PAGES
	BR	TOPPAG
NEWPAG:	MOV	INPTR,22(CHAR)		;INSERT EACH END ADDRESS IN MARGIN TABLE
	MOV	#DSTP,(INPTR)+	;INSERT MARGIN, A STOP-NOP
	MOV	#DNOP,(INPTR)+
	MOV	#DNOP,(INPTR)+
	DECB	ARG2		;TEST FOR DONE HERE
	BLE	NEWTYP		;SO AT LEAST ONE OF EACH TYPE
TOPPAG:	MOVB	(SSP),TEMP	;COUNT LINES
	MOV	INPTR,(ARG1)	;ELSE, ENTER THIS PAGE IN THE INDEX
	MOV	INPTR,-(ARG1)	;AND IN THE MARKER THAT FOLLOWS EACH ENTRY
	TST	-(ARG1)		;AND LEAVE POINTER TO NEXT ENTRY
NEWLIN:	MOV	#DNOP,(INPTR)+	;ELSE, DNOP A WORD
	CMP	SSP,#LAYTAB+2	;IF IN A PICTURE,
	BGT	INCH1
	MOV	#DNOP,(INPTR)+	;DNOP TOTAL OF 3 WORD
	MOV	#DNOP,(INPTR)+
INCH1:	DECB	TEMP		;TEST FOR END OF PAGE HERE,
	BLE	NEWPAG		;SO AT LEASE ONE LINE IN EACH PAGE
	BR	NEWLIN		;GO DO NEXT LINE
DUNPAG:	SUB	#2,ENDP		;POINT PICTURE MARGIN TO START OF LINE
	MOV	#TTY0,ARG1	;GET ADDRESS OF ROLL
	MOV	SCROLL,CHAR	;AND NUMBER OF BUFFERS
NEWTTY:	MOV	#DSTP,(ARG1)+	;IN THE ROLL, INSERT A STOP,
	MOV	ARG1,CURLIN	;THIS LINE CURRENT
	MOV	ARG1,LASLIN	;(SAVE AS LAST LINE IN ROLL)
	MOV	INPTR,(ARG1)+	;FOLLOWED BY ADDRESS OF BUFFER
	CALL	ZIPLIN		;CLEAR THIS BUFFER
	MOV	TEMP,INPTR	;TEMP POINTS TO END OF BUFFER
	DEC	CHAR		;AND DO,
	BGT	NEWTTY		;ALL BUFFERS
	SUB	ENDCHA,INPTR	;DOES BUFFER END OVERLAP INDEX END?
	MOV	INPTR,CHAR	;SAVE AMOUNT OF OVERLAP OR UNUSED
	NEG	CHAR		;GET NEGATIVE
	ASR	CHAR		;GET WORD COUNT
	BLE	DUNSET		;RETURN TO LAYOUT
	TSTB	(SSP)+		;NON-0 MEANS GREEK MODE
	BEQ	LATIN
	MOV	#DCHR,(ARG1)+	;SO INSERT SHIFT OUT
	MOV	#SHOUT,(ARG1)+
LATIN:	MOV	#TTY0+2,CURLIN	;CURLIN PTS TO TOP OF ROLL
	MOV	TTY0+2,INPTR	;INPTR POINTS TO 1ST BUFFER
	TST	(INPTR)+	;POINT IT BEYOND MODE WORD
	CLR	CURX		;CURSOR STARTS AT X=0,
	MOV	#1350,CURY	;AND Y=1350
	MOV	#DELTAZ,DELTA	;SET GRAPH INCREMENT 0
	MOV	#SUBSTK,SSP	;ALL DONE, SET UP S.P. STACK
DUNSET:	RTS	PC		;AND RETURN, LEAVING DISPLAY STOPPED




;INTERRUPT ROUTINES


;STOP INTERRUPT
;THIS ROUTINE HANDLES TWO TYPES OF STOPS: STOP0 THAT ENDS A PAGE AND
;STOP FOLLOWED BY THE ADDRESS OF A SUBROUTINE.
;ON A SUBROUTINE STOP IT PUSHES THE ADDRESS OF THE CURRENT GTPC ONTO
;THE SUBPICTURE STACK AND PUTS THAT ADDRESS IN THE GTPC.  ON A STOP0
;IT LOOKS IN THE STACK.  IF IT FINDS IT EMPTY IT RESTARTS THE DISPLAY
;AT THE TOP OF THE DISPLAY FILE.  OTHERWISE, IT POPS THE LAST CALLING
;ADDRESS INTO THE GTPC.

STPINT:	MOV	TEMP,-(SP)	;SAVE REGISTER ON STACK
	MOV	@GTPC,TEMP	;GET FOLLOWING WORD
	BLE	STOP0		;IF AN ADDRESS THERE,
	MOV	GTPC,-(SSP)	;PUSH GTPC ONTO STACK
	ADD	#2,(SSP)	;AND MAKE IT POINT TO NEXT WORD
	BR	GO		;AND START AT CALLED ADDRESS
STOP0:	CMP	SSP,#SUBSTK	;IF STACK EMPTY ON STOP0,
	BEQ	GOTOP		;START DISPLAY AT TOP
	MOV	(SSP)+,TEMP	;ELSE POP STARTING ADDRESS
	BR	GO
GOTOP:	MOV	#DFILE,TEMP	;TOP ADDRESS
GO:	MOV	TEMP,GTPC	;START DISPLAY
	MOV	(SP)+,TEMP	;RETRIEVE REGISTER
	RTI			;AND EXIT


;LIGHT PEN INTERRUPT

;LPINT CHECKS FOR A LONG VECTOR OR ABS. POINT IN PICTURE 0, LINE 0.
;IF SO, IT TAKES THE GTX AND GTY AND MAKES THESE THE X AND Y COORDINATES
;OF THAT LINE, MAKING SURE TO KEEP THE SAME VISIBLITY.
;IT ALSO SAVES THE ADDRESS OF THE GTPC FOR USE BY 'HIT'

LPINT:	MOV	TEMP,-(SP)	;SAVE TWO REGISTERS
	MOV	ARG1,-(SP)
	MOV	GSTART,TEMP	;GET ADDRESS OF START OF GRAPHICS
	ADD	#10,TEMP	;POINT TO LINE 0, WORD 1
	TST	(TEMP)		;TEST FOR SUBROUTINE CALL (A STOP)
	BLT	NOLPCO		;IF SO,DO NOTHING
	MOV	GTX,ARG1	;ELSE, GET X -COORD OF HIT
	BIC	#176000,ARG1	;GET RID OF GRAPH INCREMENT STORE HERE
	BIT	#40000,(TEMP)	;TEST FOR VISIBLE
	BEQ	NOTVIS
	BIS	#40000,ARG1	;IF SO SET VISIBLE BIT
NOTVIS:	MOV	ARG1,(TEMP)+	;AND INSERT X-COORD
	MOV	GTY,ARG1	;NOW GET Y-COORD OF HIT
	BIC	#176000,ARG1	;IGNORE OTHER BITS STORED THERE
	CMP	ARG1,#1400	;AND KEEP IT ON THE SCREEN
	BLT	ONPIC
	MOV	#1377,ARG1
ONPIC:	MOV	ARG1,(TEMP)
NOLPCO:	MOV	GTPC,HITADR	;NOW SAVE ADDRESS OF HIT (+6)
	CMP	HITADR,@CHAFIG	;UNLESS CURRENTLY NOT IN A PICTURE
	BLE	INAPIC
	MOV	(SSP),HITADR	;IN WHICH CASE SAVE THE CALLER'S ADDRESS
INAPIC:	MOV	#1,GTPC		;RESTART THE DISPLAY
	MOV	(SP)+,ARG1	;AND RESTORE REGISTERS
	MOV	(SP)+,TEMP
	RTI


;TIME OUT INTERRUPT
;TIMINT JUST RESTARTS THE DISPLAY.


TIMINT:	MOV	#DFILE,GTPC	;JUST RESTART DISPLAY AT TOP OF FILE
	RTI



	.IFDF	NOBUF		;THIS ROUTINE USES NO BUFFER
;TENINT PICKS UP THE INPUT CHARACCTER FROM THE PDP-10
;IT WILL PUT THIS CHAR IN THE INPUT WORD IF THIS WORD IS CLEAR
;I.E. IF PREVIOUS CHARACTER USED ALREADY

TENINT:	MOVB	@#TENIN+2,INCHAR	;GET CHAR
	INCB	INCHAR+1	;AND SET FLAG FOR GETCAR ROUTINE
	RTI
	.ENDC



	.IFNDF	NOBUF		;THIS ROUTINE USES A 5 WORD CATCH UP

;TENINT GETS THE NEXT CHARACTER AND INSERTS IT IN THE BUFFER, IF IT
;FINDS SPACE AVAILABLE.

TENINT:	MOV	CHAR,-(SP)	;SAVE A REGISTER
	CMP	OUT,IN		;IF CAUGHT UP,
	BLT	NOCAUT
	MOV	#INBUFF,IN	;RESET PTRS TO BASE OF BUFFER
	MOV	#INBUFF,OUT
NOCAUT:	MOV	@#TENIN+2,CHAR	;GET THE CHAR.
	CMP	IN,#ENDBUF	;OVERFLOW?
	BLT	INOK
	CALL	BELL		;YES, RING THE BELL
	BR	POPCH		;AND IGNORE THE CHARACTER
INOK:	MOVB	CHAR,@IN	;INSERT THE CHAR.
	INC	IN		;BUMP THE POINTER
POPCH:	MOV	(SP)+,CHAR	;RESTOR SAVED REGISTER
	RTI			;AND EXIT

INBUFF:	.WORD	0		;START OF INPUT BUFFER
	.=.+30			;14 WORDS LONG
	ENDBUF=.

	.ENDC


;KEYINT TAKES INPUT FROM THE KEYBOARD AND SENDS IT TO THE 10
;IF IT RECEIVES A CONTROL R, IT TRAPS IT AND RESETS

KEYINT:	CMPB	@#KEYIN+2,#CONR	;ON CONTROL R,
	BNE	OUTCH
	JMP	RSET		;RESET
OUTCH:	MOV	@#KEYIN+2,@#TENOUT+2	;ELSE, SEND TO 10
	RTI



;CLKINT JUST INCREMENTS THE TIMER

CLKINT:	INC	TIMER		;INCREMENT THE TIMER
	RTI

TIMER:	.WORD	0		;TIMER HOLD NUMBER OF TICKS




;ERROR ROUTINES


;NEXM RESTARTS ON NON-EXISTANT MEMORY
NEXM:	MOV	#MES2,MESPTR	;PRINT NEXM MESSAGE,
GOSET:	JMP	RSET		;AND GO START

;PWRFAL RESTARTS ON POWER-UP
PWRFAL:	MOV	#MES3,MESPTR	;SET UP POWER MESSAGE
	BR	GOSET		;THEN GO START




;VARIABLE STORAGE

CURLIN:	.WORD	0		;POINTER TO CURRENT TTY LINE IN ROLL
LASLIN:	.WORD	0		;POINTER TO LAST LINE IN ROLL
GSTART:	.WORD	0		;POINTER TO LAST LINE IN ROLL
MESPTR:	.WORD	MES0		;POINTS TO BYTE OF MESSAGE TO DISPLAY
IN:	.WORD	INBUFF		;INPUT BUFFER IN POINTER
OUT:	.WORD	INBUFF		;INPUT BUFFER OUT POINTER
TEMPO:	.WORD	0		;ALL PURPOSE TEMPORARY
PAGES:	.WORD	0		;HOLDS AMT OF ORIGINAL PAGES IN SYSTEM
KSIZE:	.WORD	0		;CORE SIZE, START OF INDEX
SCROLL:	.WORD	0		;HOLDS ORIGINAL NUMBER OF VT05 BUFFERS
CHARS:	.WORD	0		;NUMBER OF CHARS PER BUFFER
MODE:	.WORD	0		;CONTAINS CURRENT MODE
HITADR:	.WORD	0		;CONTAINS ADDRESS +2 OF LAST LIGHT PEN HIT


;MESSAGES

MES1:	.WORD	CRLF		;EACH MESSAGE STARTS WITH CRLF
	.ASCII	"**RESET**"
	.BYTE	CR,LF,7		;AND ENDS WITH CRLF+BELL
MES0:	.BYTE	0
MES2:	.BYTE	CR,LF		;START MESSAGE WITH CRLF
	.ASCII	"**NEXM**"
	.BYTE	CR,LF		;END WITH CRLF
	.BYTE	0		;0 FOR END OF MESSAGE
MES3:	.BYTE	CR,LF
	.ASCII	"**POWER**"
	.BYTE	CR,LF
	.BYTE	0
	.EVEN
	.WORD	0		;EACH MESSAGE ENDS WITH 0



;INIT CALCULATES THE SIZE OF CORE USING THIS VALUE TO DETERMINE THE
;ORIGINAL NUMBER OF PAGES 300(10) WORDS LONG THAT WILL FIT IN THE
;SYSTEM.  IT PUTS THIS VALUE IN 'PAGES' FOR SETUP CODE TO USE AND
;PUTS THE END OF THE BOOK INTO 'INDEX' WHERE THE INDEX STARTS

INIT:	RESET
	RESET

	MOV	#STACK,SP	;DSTART MAIN STACK
	MOV	#IFEND,@#4	;SET UP NEXM EXIT FROM LOOP
	MOV	#340,@#6
	MOV	#INIT+SSIZE,R0	;GET START OF BOOK
	ADD	#ROLSIZ,R0	;DON'T FORGET THE ROLL
	ADD	#BUFALL,R0	;OR THE BUFFER AREA
	CLR	PAGES		;INITIALIZE PAGES
NEXPIC:	MOV	#460,R2		;300(10) LENGTH PAGES
NEXWRD:	TST	(R0)+		;LOOP TILL NEXM,
	TST	R0		;CHECK FOR >16K MEMORY			**NEW**
	BMI	IFEND		;IF TRUE, SIMULATE 16K			**NEW**
	DEC	R2		;COUNTING OFF LINES,
	BGT	NEXWRD
	INC	PAGES		;AND PAGES
	BR	NEXPIC
IFEND:	CMP	-(R0),-(R0)	;LEAVE A LITTLE ROOM
	MOV	R0,KSIZE	;AND MAKE THIS THE CORE SIZE
	MOV	#NEXM,@#4	;ON NEXM, RESTORE THE VECTOR
	NEG	R2		;CALCULATE REMAINDER
	ADD	#454,R2
	ASR	R2		;AND DIVIDE REMAINDER BY 4
	ASR	R2
ROOMIN:	CMP	R2,PAGES	;IF REMAINDER NOT BIG ENUF FOR INDEX
	BGT	ROOM
	DEC	PAGES		;TRY ONE LESS PAGE
	ADD	#145,R2		;INCREASING INDEX AREA BY ITS SIZE
	BR	ROOMIN
ROOM:	MOVB	#144,PAGES+1		;SET PAGES 100 LINES LONG
	JMP	START		;NOW GO, SETUP WILL OVERLAY THIS CODE

	.=INIT+SSSIZE+4		;LEAVE ROOM FOR SUBPICTURE STACK	**NEW**
	SUBSTK=.		;SUBPICTURE STACK BACKS INTO ABOVE CODE
DFILE:	.WORD	TXTSTA+NOITAL		;DFILE STARTS WITH STATUS,
DELTA:	.WORD	DELTAZ		;GRAPH INCREMENT OF 1
	.WORD	DPT		;PT AT TOP OF SCREEN STARTS FILE
CURX:	.WORD	0
CURY:	.WORD	1350		;TO LOCATE CURSOR
	.WORD	DCHR+BLINK+INT3+NOLITE	;BLINKING CURSOR FOLLOWS
CURSOR:	.BYTE	17,177		;SHIFT IN AND CURSOR
	.WORD	DPT		;THEN ABS POINT
	.WORD	0		;TO TOP OF SCREEN
	.WORD	1400
	.WORD	DCHR+NOBLI+INT3+SOLID+NOLITE		;START BUFFERS IN CHAR. MODE
TTY0:	.WORD	DSTP		;ROLL STARTS HERE, GRAPHICS FOLLOW



	.END	INIT