Trailing-Edge
-
PDP-10 Archives
-
decuslib20-03
-
decus/20-0078/rts/phfo.mac
There are 2 other files named phfo.mac in the archive. Click here to see a list.
SUBTTL FORTRAN INTERFACE PROCEDURE
; AUTHOR: LARS ENDERIN
; VERSION: 1
; PURPOSE: Acts as procedure body for a FORTRAN procedure
; i e takes care of differences between calling sequences
; so that the FORTRAN procedure acts to the SIMULA
; program as if it were a SIMULA procedure.
; CONTENTS:
ENTRY .PHFO
SEARCH SIMMAC,SIMRPA,SIMMCR
RTITLE PHFO
SALL
MACINIT
ERRMAC PH
;REGISTER ASSIGNMENTS;
;--------------------;
XAT= X13 ;Actual parameter type
XFT= X11 ;Formal parameter type
XFK= X10 ;Formal parameter kind
XFP= X7 ;Formal parameter list pointer
XFAD= X6 ;Formal location address
XFL0= X5 ;First word of ZFL
XRHT= X11 ;Right hand side type (.PHCV parameter)
XLHT= X13 ;Left hand side type (.PHCV parameter)
SUBTTL .PHFO
Comment;
Purpose: PHFO acts as interface between SIMULA and FORTRAN,
allowing a FORTRAN procedure to be called as if it were
a SIMULA procedure.
Input: XCB points to a procedure instance corresponding to a special
prototype. The procedure instance holds parameter
values, space for book-keeping, and an address list area
to be filled with addresses to the parameters as required
by FORTRAN. The address of the FORTRAN code is found
in the symbol table (XCB.ZBIZPR.ZPRSYM.ZSMFOR).
Output: Whatever the FORTRAN procedure produces, possibly
a function value (returned by FORTRAN in X0 (+X1)).
Function: The formal parameter list, if any, is scanned. Any para-
meter which is not in a form acceptable to FORTRAN is
evaluated to an acceptable form. For NAME mode parameters,
the formal location (ZFL) is evaluated by one of the
standard parameter handling procedures (PHFA,PHFV,PHFM)
to yield a value or an address. If a value is
computed rather than an address, an anonymous cell
in the procedure block gets the value, and the address of
that cell is put into the address list. If the actual
parameter is a simple variable (possibly accessed
via dot notation or as an array element), its dynamic
address is put into the address list, except if the
actual type is different from the formal type, when
the value must be converted before and after the call
to the FORTRAN subroutine. In this case an anonymous cell
is also used. For an array, the address of the first element
must be used. When all parameters have been scanned,
the absolute addresses are computed, and the FORTRAN
procedure is called (different calling seq. for F40 resp
FORTRAN 10). Any conversion of differently typed values
is carried out (from temporary cell to ordinary cell),
the function result, if any is stored in the block (two
words are always reserved). If the FORTRAN procedure is
a function, return via CSEP, otherwise goto ZDRARE with
XCB=ZDRZBI.
;
SUBTTL .PHFO, PROCEDURE BLOCK LAYOUT
Comment;
0 +-----------------------+
! ZBI !
2 !-----------------------!
! Space for function !
! value !
4 !-----------------------!
! YFOFAD !
5 !-----------------------!
! YFOAAD !
6 !-----------------------!
! YFOPAD !
7 !-----------------------!
! Parameter ! Computed at parameter transfer
! locations ! (SIMULA procedure call)
ZMPDOV !-----------------------!
! Temporary cells for ! Used when types differ or actual is
! values of NAME para- ! a constant or expression (cannot
! meters ! store into actual parameter)
!-----------------------!
! Address list header ! FORTRAN-10: -ZPCNRP,,0
ZMPDRV !-----------------------! F40: JSA X16,ZSMFOR
! Dynamic addresses for !
! actual parameters, !
! transformed to abs !
! addresses before call-!
! ing FORTRAN subrout. !
!-----------------------!
! Address list trailer ! F40: JRST back to .PHFO
+-----------------------+
;
SUBTTL .PHFO
.PHFO: PROC
LOWADR
CFORBID
EXEC PHFOAD
IF ;Any parameters
SKIPL OFFSET(ZPCPAR)(XSAC)
GOTO FALSE
THEN
SKIPA XFP,YFOFAD(XCB)
LOOP
ST XFP,YFOFAD(XCB)
EXEC PHFO.1
AS
L XFP,YFOFAD(XCB)
AOBJN XFP,TRUE
SA
EXEC PHFOAD
IFON ZPCNAM(XSAC)
EXEC PHFO.2
FI
LOWADR
ST XCB,YFOXCB(XLOW)
LF XTAC,ZPCNRP(XSAC)
LF XWAC1,ZPRSYM(XSAC)
LF XWAC1,ZSMFOR(XWAC1)
IF ;F40
IFOFF ZPCF40(XSAC)
GOTO FALSE
THEN ;Put in instructions before and after address list
HRLI XWAC1,(JSA X16,)
LI XWAC2,@YFOAAD(XCB)
ST XWAC1,-1(XWAC2)
ADDI XTAC,(XWAC2)
L [BRANCH L1()]
ST (XTAC)
BRANCH -1(XWAC2)
ELSE ;FORTRAN-10
MOVN XTAC
LI X16,@YFOAAD(XCB)
HRLM -1(X16)
EXEC 0(XWAC1)
FI
L1():! ;Return point here
LOWADR
L XCB,YFOXCB(XLOW)
SETZM YFOXCB(XLOW)
STD X0,ZBI%S(XCB) ;Store any function result
EXEC PHFOAD
IF ;Any parameter of mode NAME
SKIPL OFFSET(ZPCPAR)(XSAC)
GOTO FALSE
IFOFF ZPCNAM(XSAC)
GOTO FALSE
THEN
SKIPA XFP,YFOFAD(XCB)
LOOP
ST XFP,YFOFAD(XCB)
LF ,ZFPMOD(XFP)
CAIN QNAME
EXEC PHFO.3
AS
L XFP,YFOFAD(XCB)
AOBJN XFP,TRUE
SA
FI
LF ,ZPCTYP(XSAC)
IF ;Type procedure
CAIN QNOTYPE
GOTO FALSE
JUMPE FALSE
THEN LI XSAC,CSEP
ELSE
LF XSAC,ZDRARE(XCB)
LF XCB,ZDRZBI(XCB)
FI
CALLOW
JSP (XSAC)
EPROC
PHFO.1: PROC
LF XWAC2,ZFPOFS(XFP)
LI XWAC1,(XCB)
HRL XWAC1,XWAC2 ;Dynamic address of formal loc
LF ,ZFPMOD(XFP)
IF ;NAME mode
CAIE QNAME
GOTO FALSE
THEN
EXEC PHFOFL
IF CAIE XFK,QARRAY
GOTO FALSE
THEN
EXEC PHFM
Z
LI 2
ADDM YFOPAD(XCB)
GOTO L2
FI
IF IFOFFA ZFLVTD(XFL0)
GOTO FALSE
THEN ;Constant or expression, use PHFV
GOTO L1
ELSE
EXEC PHFA
Z
EXEC PHFOFL
;Simplify ZFL
SETONA ZFLNTH(XFL0)
SF XWAC1,ZFLZBI(,XFL0)
SETF QDTVSI,ZFLDTP(,XFL0)
ST XFL0,(XFAD)
HLRZM XWAC1,OFFSET(ZFLOFS)(XFAD)
IF ;Conversion necessary
IFOFFA ZFLCNV(XFL0)
GOTO FALSE
THEN ;Compute converted value and save in tmp loc
HRLZ XWAC1,(XFP)
HRRI XWAC1,(XCB)
L1():! EXEC PHFV
Z
EXEC PHFOFL
STD XWAC1,@YFOPAD(XCB)
;Dyn. address of temp loc
HRLZ XWAC1,YFOPAD(XCB)
HRRI XWAC1,(XCB)
FI FI
LI 2
ADDM YFOPAD(XCB)
ELSE ;Reference or value mode
LF XFK,ZPDKND(XFP)
IF CAIE XFK,QARRAY
GOTO FALSE
THEN ;Compute address of first element of array
ADDI XWAC1,(XWAC2)
L XWAC1,(XWAC1)
L2():! LF XWAC2,ZARSUB(XWAC1)
IMULI XWAC2,3
ADDI XWAC2,3
HRL XWAC1,XWAC2
FI FI
LF XSAC,ZBIZPR(XCB)
IF ;no name parameter
IFON ZPCNAM(XSAC)
GOTO FALSE
THEN ;No name param, abs address directly
HLRZ XWAC2,XWAC1
ADDI XWAC1,(XWAC2)
;PUT IN TYPE CODE
LF XFT,ZTDTYP(XFP)
HRL XWAC1,PHFOTY(XFT)
IFON ZPCF40(XSAC)
HLL XWAC1,PHFOTY(XFT)
FI
ST XWAC1,@YFOAAD(XCB)
AOS YFOAAD(XCB)
RETURN
EPROC
PHFO.2: PROC
;Convert dynamic addresses in address list to absolute addresses
LF XTAC,ZPCNRP(XSAC)
LOOP
L XWAC1,@YFOAAD(XCB)
HLRZ XWAC2,XWAC1
ADDI XWAC2,(XWAC1)
ST XWAC2,@YFOAAD(XCB)
AOS YFOAAD(XCB)
L XFP,@YFOFAD(XCB)
LF XFT,ZTDTYP(XFP)
;PUT IN TYPE CODE
HRL XWAC1,PHFOTY(XFT)
IFON ZPCF40(XSAC)
HLL XWAC1,PHFOTY(XFT)
AOS YFOFAD(XCB)
AS
SOJG XTAC,TRUE
SA
EXEC PHFOAD
RETURN
EPROC
PHFO.3: PROC
;Perform any necessary conversion before returning name parameter
;value from the FORTRAN procedure
EXEC PHFOFL
IF ;an address was passed as actual parameter
IFONA ZFLVTD(XFAD)
GOTO FALSE
THEN ;the value should be returned to caller
LF XLHT,ZFLATP(XFAD)
LD XWAC1,@YFOPAD(XCB)
IF ;Conversion called for
IFOFFA ZFLCNV(XFL0)
GOTO FALSE
THEN
LF XRHT,ZFLFTP(XFAD)
EXEC PHCV
LF X0,ZFLZBI(XFAD)
LF XTAC,ZFLOFS(XFAD)
ADD XTAC,X0
ST XWAC1,(XTAC)
CAIN XLHT,QLREAL
ST XWAC2,1(XTAC)
FI FI
LI 2
ADDM YFOPAD(XCB)
RETURN
EPROC
PHFOAD: PROC
LF XSAC,ZBIZPR(XCB)
LF XTAC,ZPCNRP(XSAC)
MOVSI (Z (XCB)) ;INDEX=XCB
LF XFP,ZPRMAP(XSAC)
HRR OFFSET(ZMPDRV)(XFP)
ST YFOAAD(XCB)
HRR OFFSET(ZMPDOV)(XFP)
ST YFOPAD(XCB)
MOVN XFP,XTAC
MOVSS XFP
HRRI XFP,ZPC%S(XSAC)
ST XFP,YFOFAD(XCB)
RETURN
EPROC
PHFOFL: L XFP,YFOFAD(XCB)
LF XFAD,ZFPOFS(XFP)
ADDI XFAD,(XCB)
L XFL0,(XFAD)
LF XFK,ZPDKND(XFP)
RETURN
OPDEF ARG [JUMP]
PHFOTY: ;Type code table for FORTRAN , lhs=F40, rhs=F10
ARG 0,0 ;UNDEF
ARG 0,100 ;INTEGER
ARG 2,200 ;REAL
ARG 6,400 ;LONG REAL
ARG 0,100 ;CHARACTER==INTEGER
ARG 3,40 ;BOOLEAN
LIT
END