Trailing-Edge
-
PDP-10 Archives
-
k20v7b
-
mfg/cmds/mh101c.cmd
There are no other files named mh101c.cmd in the archive.
; MH101C.CMD VER:0.1 12-1-78 M.L.R. 27911
;
; MH10 CHECKOUT PROCEDURE PART 1-CONTINUED
; MH10 PROCEDURE SHEET 18 OF 40 SECTION 11.2 B 1
;
;*******
;******* MAKE SURE THE PROCESSOR IS CABLED TO PORT 0 OF THE MH10.
;*******
P MEMCON.A11
P UB.RAM
SED
CM1
^Z
P SUBRTN.A10
P DEMMG.A10
SW 522000
STD 1
;******* NOW CABLE THE PROCESSOR TO PORT 1 OF THE MH10.
;******* TYPE JC WHEN YOU ARE READY.
SP
I MH101C.CCL
;******* NOW CABLE THE PROCESSOR TO PORT 2 OF THE MH10.
;******* TYPE JC WHEN YOU ARE READY.
SP
I MH101C.CCL
;******* NOW CABLE THE PROCESSOR TO PORT 3 OF THE MH10.
;******* TYPE JC WHEN YOU ARE READY.
SP
I MH101C.CCL
;******* NOW CABLE THE PROCESSOR TO PORT 4 OF THE MH10.
;******* TYPE JC WHEN YOU ARE READY.
SP
I MH101C.CCL
;******* NOW CABLE THE PROCESSOR TO PORT 5 OF THE MH10.
;******* TYPE JC WHEN YOU ARE READY.
SP
I MH101C.CCL
;******* NOW CABLE THE PROCESSOR TO PORT 6 OF THE MH10.
;******* TYPE JC WHEN YOU ARE READY.
SP
I MH101C.CCL
;******* NOW CABLE THE PROCESSOR TO PORT 7 OF THE MH10.
;******* TYPE JC WHEN YOU ARE READY.
SP
I MH101C.CCL
;DONE
;
; SECTION 11.2 B-1 IS NOW COMPLETE.
;
;******* SAVE THIS TYPEOUT FOR Q.C.INSPECTION. *******
;
; NOW PROCEDE TO SECTION 11.2 B-2 BY TYPEING J MH102C.CMD