Trailing-Edge
-
PDP-10 Archives
-
tops10_703a_sys_atpch16_bb-fr67f-bb
-
instal.doc
There are 31 other files named instal.doc in the archive. Click here to see a list.
INSTAL.DOC for DECSYSTEM-10
Installation Information for Autopatch-10/20 V1.2
-------------------------------------------------
1.0 INTRODUCTION
This document describes the procedures necessary to set up your
DECSYSTEM-10 for patching software with Autopatch-10/20 V1.2. It
augments the information provided in chapter 2 of the Autopatch
Procedures/Reference Manual. This initialization operation is
required only once. After it has been completed, you will be able
to apply the patches distributed periodically in the Autopatch
Kits.
In order to set up your system for autopatching, you must create a
disk directory referred to as the autopatching directory. This
directory is used to patch and rebuild the software. In the
autopatching directory you must install some of the files supplied
on this patch tape as described in section 2 of this document.
In addition, you must also prepare a distribution directory for
each product you intend to autopatch. This operation is described
for each of the autopatchable products in section 3 of this
document.
For the DECSYSTEM-10 the following products are currently
autopatchable:
Version 10B of ALGOL-10
Version 7.03 of ANF10
Version 2 of the APL products:
APL-10
APLSF-10
Version 12C of COBOL-10
Version 5A of DBMS-10
Version 7.03 of DECNET-10
Version 11 of FORTRAN-10
Version 7.03 of GALAXY-10
Version 4 of IBMCOM/ET-10
Version 1 of IBMCOM/HASP-10
Page 2
Version 7.03 of MCB-10
Version 11 of MS-10
Version 4D of SORT-10
Version 7.03 of TOPS-10 and Utilities
Page 3
Autopatch V1.2 is supported for applying only those patches
provided by Digital Equipment Corporation as part of an Autopatch
Kit. Furthermore, those patches are supported for distributed
(field-image) software or distributed software that has been
modified only by autopatching.
2.0 INSTALLING AUTOPATCH
If you are not using an autopatching structure named DSKP:, we
recommend that you make an entry in your login procedures so that
DSKP: is assigned to be the structure you will be using. If you
do this and use the default [7,6] ppn, you will not need to edit
the BACKUP retrieval command files provided to set-up the product
distribution directories and to process the patch tape.
The second save set of the patch tape contains tools and control
files that are used in the autopatching operation. A list of all
the files in this save set is given in section 4 of this document.
Use the BACKUP program to restore from this save set to the
appropriate disk directories those files you need.
The following files should be installed in [1,4] or one of the
directories belonging to SYS:
PEP.EXE
PEPB.EXE
The following file should be installed in [2,5] or one of the
directories belonging to HLP:
PEP.HLP
The following files should be installed in the disk directory you
have set up as the autopatching directory:
PEP101.PDF
UPDATE.EXE
In addition, a product-specific patch and build control file and a
product description file must be installed in the autopatching
directory for each product you intend to autopatch. These files
are in the installation save set of the patch tape. See the last
section for a list of these files.
The installation save set also contains indirect command files to
assist you in setting up the product distribution directories.
These BACKUP CCL files are intended to be run interactively. See
the last section for a list of these files.
For each product you intend to autopatch, you should install the
associated control files in the autopatching directory. For
example, if you intend to autopatch the APLSF-10-V2 product you
would install
Page 4
APL1S2.CTL for APLSF-10 rebuild
APL1S2.PDF for Autopatch installation
APL1S2.CCL for preparing distribution directory
in the autopatching directory.
Page 5
3.0 AUTOPATCH INSTALLATION OF SPECIFIC PRODUCTS
3.1 PREPARING FOR AUTOPATCHING ALGOL-10
Before preparing this product for Autopatching, you should install
the product on your system as described in the installation
documentation supplied on the product distribution tape. Unless
the product is correctly installed, you will not be able to SELECT
it for Autopatching.
The disk directory in which you have installed the executable files
for ALGOL-10 is referred to as the product installation directory.
In most cases this will be [1,4] or one of the directories
belonging to SYS:. This directory must contain the files:
ALGOL.EXE
ALGOTS.EXE
ALGLIB.REL
ALGDDT.HLP
ALGOL.HLP
*NOTE* The ALGOL distribution does not have a ALGOTS.EXE file but
does have a ALG310.EXE file. For Autopatching this file must be
named ALGOTS.EXE in the ALGOL Autopatch Installation directory
(INS:). Unless you COPY or RENAME to create the ALGOTS.EXE file
the PEP SELECT process for ALGOL-10-V10B will fail. An edit
supplied for the ALGOL compiler changes generated code to use the
new generic reference to the OTS.
The following file is required to build the ALGOL product. It must
be available either in the patching area (PAT:), the distribution
area (DIS:), or in the installation area (INS:).
From the first save-set of the Autopatch tape
HELPER.REL
This file will be moved from the Autopatch tape when you use one of
the BACKUP CCL files described in the README file.
You will need to copy the following files from the ALGOL-10
distribution tape BB-D608D-SB(1600 BPI) or AP-5069D-SB(800 BPI)
into the disk directory you have set up as the ALGOL-10
distribution directory.
From save set ALGOL-SOURCES
ALGCOD.MAC ALGCON.MAC ALGDDT.MAC ALGDEC.MAC
ALGEXP.MAC ALGFOR.MAC ALGFUN.MAC ALGLIB.MAC
ALGMAC.MAC ALGOTS.MAC ALGPRM.MAC ALGSER.MAC
ALGSTB.MAC ALGSTM.MAC ALGSYS.MAC ALGUTL.MAC
An indirect command file to perform this operation has been
included in the installation save set on this patch tape. This
Page 6
file will restore the appropriate files to DSKP:[7,6,ALG]. If you
wish to use this command file, but are not using DSKP:[7,6,ALG] as
your distribution directory you will have to edit this command file
to change the /RESTORE command to correspond to your directory.
To use this command file, issue the following commands:
.R BACKUP
/TAPE tape:
/@DSKP:ALG10B.CCL[7,6]
The Patch and Build control file for the re-build of this product
as well as the Autopatch product description file are supplied in
the Installation Save-set on the Autopatch tape. See the last
section of this document for a list of these files. There is a
BACKUP command file provided in the first Save-set which will
restore these files to the proper directory. See the README
documentation file in the first Save-set for more information.
Page 7
3.2 PREPARING FOR AUTOPATCHING ANF10
You will need to copy the following files from the TOPS 10 V7.03
Monitor distribution tape BB-X140B-SB into the disk directory you
have set up as the ANF10 distribution directory.
CHK11.P11 DN2741.P11 DNCDDH.P11 DNCDDQ.P11
DNCDMC.P11 DNCDUP.P11 DNCNFG.P11 DNCOMM.P11
DNCRD.P11 DNCTAB.P11 DNDBG.P11 DNDCMP.P11
DNDCP4.P11 DNDEV.P11 DNDH11.P11 DNDL10.P11
DNDM11.P11 DNDN11.P11 DNDTE.P11 DNDZ11.P11
DNLBLK.P11 DNLPT.P11 DNNCL.P11 DNNSP.P11
DNNSP3.P11 DNRDA.P11 DNRDE.P11 DNTRCE.P11
DNTSK.P11 DNTTY.P11 MACROS.P11 S.P11
TSKTST.P11
An indirect command file to perform this operation has been
included in the installation save set on this patch tape. This
file will restore the appropriate files to DSKP:[7,6,ANF]. If you
wish to use this command file, but are not using DSKP:[7,6,ANF] as
your distribution directory you will have to edit this command file
to change the /RESTORE command to correspond to your directory.
To use this command file, issue the following commands:
.R BACKUP
/TAPE tape:
/@DSKP:ANF703.CCL[7,6]
The MON703.CCL file will also put the files for ANF into
DSKP:[7,6,ANF]. Users of Autopatch for the first time do not need
to use the ANF703.CCL file if the [7,6,ANF] area has been
established prior to use of the MON703.CCL file.
The ANF product is NOT rebuilt by Autopatch. The Autopatch process
will update the supported sources in the DIS: area. After the
INSTALL command has been processed, the customer may use the
sources in DIS: to rebuild the product with procedures which are
appropriate to the site.
The following files are supplied in the second save-set of the
Autopatch tape and must be restored to the DIS: area for ANF10:
DDT.P11 DNCDDP.P11 DNCDDS.P11 DNDEMO.P11
DNLP20.P11 DNMOP.P11 DNLPT.P11 DNPTP.P11
DNPTR.P11 DNRAM.P11 DNVFU.P11
The Patch control file for the update of this product as well as
the Autopatch product description file are supplied in the
Installation Save-set on the Autopatch tape. See the last section
of this document for a list of these files. There is a BACKUP
command file provided in the first Save-set which will restore
these files to the proper directory. See the README documentation
file in the first Save-set for more information.
Page 8
3.3 PREPARING FOR AUTOPATCHING APL
Both APL-10 and APLSF-10 are autopatchable with Autopatch-10/20.
Before preparing these products for autopatching, they should be
installed on your system as described in the installation
documentation supplied on the APL distribution tapes.
To make the product autopatchable, some of the files from the
product distribution tape will have to be installed in the disk
directory that you have set up as the APL distribution directory.
Page 9
3.3.1 APL-10 -
Before preparing this product for Autopatching, you should install
the product on your system as described in the installation
documentation supplied on the product distribution tape. Unless
the product is correctly installed, you will not be able to SELECT
it for Autopatching.
The disk directory in which you have installed the executable files
for APL-10 is referred to as the product installation directory.
In most cases this will be [1,4] or one of the directories
belonging to SYS:. This directory must contain the files:
APL.EXE
GENBAS.EXE
You will need to copy the following files from the APL-10
distribution tape BB-D477E-BB(1600 BPI) or AP-C795E-BB(800 BPI)
into the disk directory you have set up as the APL-10 distribution
directory.
From save set "REL LIBRARY"
APLB12.REL
APLH12.REL
APLB12.LNK
APLH12.LNK
An indirect command file to perform this operation has been
included in the installation save set on this patch tape. This
file will restore the appropriate files to DSKP:[7,6,APL]. If you
wish to use this command file, but are not using DSKP:[7,6,APL] as
your distribution directory you will have to edit this command file
to change the /RESTORE command to correspond to your directory.
To use this command file, issue the following commands:
.R BACKUP
/TAPE tape:
/@DSKP:APL1B2.CCL[7,6]
The Patch and Build control file for the re-build of this product
as well as the Autopatch product description file are supplied in
the Installation Save-set on the Autopatch tape. See the last
section of this document for a list of these files. There is a
BACKUP command file provided in the first Save-set which will
restore these files to the proper directory. See the README
documentation file in the first Save-set for more information.
Page 10
3.3.2 APLSF-10 -
Before preparing this product for Autopatching, you should install
the product on your system as described in the installation
documentation supplied on the product distribution tape. Unless
the product is correctly installed, you will not be able to SELECT
it for Autopatching.
The disk directory in which you have installed the executable files
for APLSF-10 is referred to as the product installation directory.
In most cases this will be [1,4] or one of the directories
belonging to SYS:. This directory must contain the files:
APLSF.EXE
GENSF.EXE
TENTAP.EXE
You will need to copy the following files from the APLSF-10
distribution tape BB-D476E-BB(1600 BPI) or AP-5065E-BB(800 BPI)
into the disk directory you have set up as the APLSF-10
distribution directory.
From save set "REL LIBRARY"
APLS12.REL
APLG12.REL
APLW12.REL
APLS12.LNK
APLG12.LNK
APLW12.LNK
An indirect command file to perform this operation has been
included in the installation save set on this patch tape. This
file will restore the appropriate files to DSKP:[7,6,APL]. If you
wish to use this command file, but are not using DSKP:[7,6,APL] as
your distribution directory you will have to edit this command file
to change the /RESTORE command to correspond to your directory.
To use this command file, issue the following commands:
.R BACKUP
/TAPE tape:
/@DSKP:APL1S2.CCL[7,6]
The Patch and Build control file for the re-build of this product
as well as the Autopatch product description file are supplied in
the Installation Save-set on the Autopatch tape. See the last
section of this document for a list of these files. There is a
BACKUP command file provided in the first Save-set which will
restore these files to the proper directory. See the README
documentation file in the first Save-set for more information.
Page 11
3.4 PREPARING FOR AUTOPATCHING COBOL-10
Before preparing this product for Autopatching, you should install
the product on your system as described in the installation
documentation supplied on the product distribution tape. Unless
the product is correctly installed, you will not be able to SELECT
it for Autopatching.
The disk directory in which you have installed the executable files
for COBOL-10 is referred to as the product installation directory.
In most cases this will be [1,4] or one of the directories
belonging to SYS:. This directory must contain the files:
for Cobol-74 for 68 to 74 translation tool
COBDDT.REL CBL74.EXE 68274.EXE
CPYLIB.EXE CBL74C.EXE * 68274C.EXE *
ISAM.EXE CBL74D.EXE * 68274D.EXE *
LIBARY.EXE CBL74E.EXE * 68274E.EXE *
RERUN.EXE CBL74O.EXE *
CBL74K.EXE * 68274K.EXE *
CBL74F.EXE * 68274F.EXE *
C74LIB.REL
C74O12.EXE
* only if using the multi-segmented compiler (ONESEG==0)
The COBOL V12C product may be patched via source file updates with
re-build and/or via encrypted EXE/REL file replacement. If you
desire to use encryption then KEY files must be retrieved from the
COBOL distribution tape. You will need to copy the following files
from the COBOL-10 V12C distribution tape BB-H580E-SB into the disk
directory you have set up as the COBOL-10 distribution directory.
COBDDT.KEY CBL74.KEY 68274.KEY
CPYLIB.KEY CBL74C.KEY 68274C.KEY
ISAM.KEY CBL74D.KEY 68274D.KEY
LIBARY.KEY CBL74E.KEY 68274E.KEY
RERUN.KEY CBL74O.KEY
CBL74K.KEY 68274K.KEY
CBL74F.KEY 68274F.KEY
C74LIB.KEY
C74O12.KEY
If you desire to Autopatch COBOL via updated sources the following
files are required to build the COBOL product. They must be
available either in the patching area (PAT:), the distribution area
(DIS:), or in the installation area (INS:).
From the first save-set of the Autopatch tape
HELPER.REL MACTEN.UNV UUOSYM.UNV
These files will be moved from the Autopatch tape when you use one
of the BACKUP CCL files described in the README file.
Page 12
You will need to copy the following files from the COBOL-10
distribution tape BB-H580E-SB into the disk directory you have set
up as the COBOL-10 distribution directory.
From save set "COBOL-Source"
ACCEPT.MAC ALBSTB.MAC ALF.MAC ARGS.MAC
ASCEBC.MAC ASCSIX.MAC BISGEN.MAC BTREE.MAC
CANCEL.MAC CBLIO.MAC CDD.MAC CHREQV.MAC
CLEANC.MAC CLEAND.MAC CLEANT.MAC CLRNAM.MAC
CMNGEN.MAC CMP.MAC COBCOM.MAC COBDDT.MAC
COBFUN.MAC COBOLA.MAC COBOLB.MAC COBOLC.MAC
COBOLD.MAC COBOLE.MAC COBOLF.MAC COBOLG.MAC
COBOLK.MAC COBOLO.MAC COBST.MAC COBTST.MAC
COBVER.MAC COMPD.MAC COMUNI.MAC COVRLY.MAC
CPYLIB.MAC CTREE.MAC DEBSTB.MAC DIAGS.MAC
DIV11.MAC DPADD.MAC DPDIV.MAC DPMUL.MAC
DPSUB.MAC DSORT.MAC DSPFP.MAC DTREE.MAC
EASTBL.MAC EBCASC.MAC EDIT.MAC * EDITB.MAC
EXAM.MAC EXPGEN.MAC EXPON.MAC FIX.MAC
FLGDF.MAC FLOAT.MAC FNDPOP.MAC FTDEFS.MAC
GC.MAC GD.MAC GETASY.MAC GETCPY.MAC
GETGEN.MAC GETITM.MAC GETTAG.MAC HANDAN.MAC
IFGEN.MAC IMPURE.MAC INSPEC.MAC INTERM.MAC
IOGEN.MAC IOTMP.MAC IOTMPU.MAC IPCGEN.MAC
ISAM.MAC KEY.MAC KPROG.MAC LBLERR.MAC
LBLPRM.MAC LCM10.MAC LCMIPC.MAC LIBARY.MAC
LIBREL.MAC LIBSHR.MAC LILOWS.MAC LINE.MAC
LSU.MAC MAGNEG.MAC MATGEN.MAC MESGEN.MAC
METIO.MAC METUNV.MAC MMANGR.MAC MMANGU.MAC
MOVE.MAC MOVGEN.MAC MSCGEN.MAC NSTRNG.MAC
NTBSTB.MAC NUBSTB.MAC NUM.MAC NUMEQV.MAC
OPCTAB.MAC OSTRNG.MAC P.MAC PC.MAC
PD.MAC PERF.MAC PMATCH.MAC PNZ.MAC
PSCAN.MAC PURAB.MAC PURE.MAC PUREC.MAC
PURED.MAC PUREE.MAC PUREO.MAC PURFG.MAC
PUTAS1.MAC PUTAS2.MAC PUTAS3.MAC PUTBIN.MAC
PUTCPY.MAC PUTERA.MAC PUTGEN.MAC PUTLST.MAC
PUTRES.MAC REMOVL.MAC RERUN.MAC RESOLV.MAC
RMSIO.MAC RPWGEN.MAC SETRET.MAC SIZ23.MAC
SIZE1.MAC SPAC.MAC SQUIRL.MAC SRTCRF.MAC
SRTGEN.MAC STINFL.MAC STRGEN.MAC SUBSCR.MAC
TABLES.MAC TODAY.MAC TRACED.MAC TRACER.MAC
TRYNAM.MAC USRDSP.MAC XFRGEN.MAC XPAND.MAC
XPNPPL.MAC ZERC.MAC
RMSINT.UNV
CMLSYM.MAC DBDML.MAC DBGETF.MAC DBSDCL.MAC
DMLERR.MAC DMLIO.MAC DMLVOK.MAC GENDCL.MAC
STRDCL.MAC STRUNV.MAC COBASM.MAC
If building DBMS into the OTS:
SCHIO1.REL STRHI.REL
Page 13
*NOTE* EDIT.MAC is renamed as EDITC.MAC in the distribution area
An indirect command file to perform this operation has been
included in the installation save set on this patch tape. This
file will restore the appropriate files to DSKP:[7,6,CBL]. If you
wish to use this command file, but are not using DSKP:[7,6,CBL] as
your distribution directory you will have to edit this command file
to change the /RESTORE command to correspond to your directory.
To use this command file, issue the following commands:
.R BACKUP
/TAPE tape:
/@DSKP:CBL12C.CCL[7,6]
for source file updating
.R BACKUP
/TAPE tape:
/@DSKP:CBR12C.CCL[7,6]
for EXE/REL replacement updating
Use of any of these files will also restore the SORT files on the
COBOL tape to the DSKP:[7,6,SRT] area. Also the following files
are restored by these CCL files but not used by Autopatch:
CRELD.MAC GETERA.MAC SETEOF.MAC SRTTAB.MAC
STRNGL.MAC
If you will be Autopatching BOTH Cobol-74 and the 68274 Translation
Tool new files are required in the patching directory. Obtain the
COBASM.MAC file and make a copy named C74ASM.MAC. You must create
a copy of the COBASM.MAC file with the FT68274 switch set on and
call it TRNASM.MAC. For more information refer to section 6.0 of
the COBOL.INS file on the COBOL 12C distribution tape.
Do not eliminate the COBASM.MAC file - the selection process of
Autopatch requires this file to be present in the DIS: directory.
When SELECTing COBOL with PEP you will be asked if you are using
the multi-seg compiler. Unless you have set the ONESEG switch on
in the COBASM.MAC file the correct answer is YES. In order to have
Autopatch include the SORT module in the OTS you must create an
empty file named CBLSRT.FLG in the patching directory (PAT:). If
the process can find CBLSRT.REL it will then be included.
Likewise, in order to have Autopatch include support for DBMS in
the OTS you must create an empty file named CBLDBM.FLG in the
patching directory.
The Patch and Build control file for the re-build of this product
as well as the Autopatch product description file are supplied in
the Installation Save-set on the Autopatch tape. See the last
section of this document for a list of these files. There is a
BACKUP command file provided in the first Save-set which will
restore these files to the proper directory. See the README
Page 14
documentation file in the first Save-set for more information.
Page 15
3.5 PREPARING FOR AUTOPATCHING CUSTOMER SUPPORTED Monitor Modules
You will need to copy the following files from the TOPS-10 V7.03
Customer Supported distribution tape BB-X130B-SB into the disk
directory you have set up as the MONITOR-10 distribution directory.
From the second save set
CCIINT.MAC CD2SER.MAC CDPSER.MAC CDRSER.MAC
D6DINT.MAC D76INT.MAC D78INT.MAC D85INT.MAC
D8EINT.MAC D8RINT.MAC DATDMP.MAC DCRSER.MAC
DISSER.MAC DLSINT.MAC DPXKON.MAC DTASER.MAC
FHXKON.MAC FSXKON.MAC FTDLS1.MAC KASER.MAC
KISER.MAC KONFIG.MAC METCON.MAC PLTSER.MAC
PPSSER.MAC PRSSER.MAC PTPSER.MAC PTRSER.MAC
RX2SER.MAC SYSCHK.MAC TX1KON.MAC TCXKON.MAC
TMXKON.MAC TYPSER.MAC VBCSER.MAC XTCSER.MAC
UNSUP.FIL
An indirect command file to perform this operation has been
included in the installation save set on this patch tape. This
file will restore the appropriate files to DSKP:[7,6,MON]. If you
wish to use this command file, but are not using DSKP:[7,6,MON] as
your distribution directory you will have to edit this command file
to change the /RESTORE command to correspond to your directory.
To use this command file, issue the following commands:
.R BACKUP
/TAPE tape:
/@DSKP:CUS703.CCL[7,6]
The Autopatch product description file for this product is supplied
in the Installation Save-set on the Autopatch tape. See the last
section of this document for a listing of this file. There is a
BACKUP command file provided in the first Save-set which will
restore this file to the proper directory. See the README
documentation file in the first Save-set for more information.
Page 16
3.6 PREPARING FOR AUTOPATCHING DBMS-10
Before preparing this product for Autopatching, you should install
the product on your system as described in the installation
documentation supplied on the product distribution tape. Unless
the product is correctly installed, you will not be able to SELECT
it for Autopatching.
The disk directory in which you have installed the executable files
for DBMS-10 is referred to as the product installation directory.
In most cases this will be [1,4] or one of the directories
belonging to SYS:. This directory must contain the files:
SCHEMA.EXE
FORDML.EXE
DBMEND.EXE
DBINFO.EXE
DAEMDB.EXE
The following files are required to build the DBMS product. They
must be available either in the patching area (PAT:), the
distribution area (DIS:), or in the installation area (INS:).
From the first save-set of the Autopatch tape
HELPER.REL SCAN.REL
These files will be moved from the Autopatch tape when you use one
of the BACKUP CCL files described in the README file.
You will need to copy the following files from the DBMS-10
distribution tape BB-D478D-BB(1600 BPI) or AP-C804D-BB(800 BPI)
into the disk directory you have set up as the DBMS-10 distribution
directory.
From save set DBMS-SOURCE
DAB10.REL FMLANY.REL
DABANY.REL GENIO1.REL
DBS10.REL GENME1.REL
DBSANY.REL GENMS1.REL
DBSCOB.REL INF10.REL
DBSDCL.REL INFANY.REL
DBSFOR.REL MND10.REL
DDL10.REL MNDANY.REL
DDLANY.REL SCHIO1.REL
FML10.REL STRHI.REL
DAEMD1.CMD
DBINF1.CMD
DBMEN1.CMD
FORDM1.CMD
SCHEM1.CMD
An indirect command file to perform this operation has been
Page 17
included in the installation save set on this patch tape. This
file will restore the appropriate files to DSKP:[7,6,DBM]. If you
wish to use this command file, but are not using DSKP:[7,6,DBM] as
your distribution directory you will have to edit this command file
to change the /RESTORE command to correspond to your directory.
To use this command file, issue the following commands:
.R BACKUP
/TAPE tape:
/@DSKP:DBMV5A.CCL[7,6]
The Patch and Build control file for the re-build of this product
as well as the Autopatch product description file are supplied in
the Installation Save-set on the Autopatch tape. See the last
section of this document for a list of these files. There is a
BACKUP command file provided in the first Save-set which will
restore these files to the proper directory. See the README
documentation file in the first Save-set for more information.
Page 18
3.7 PREPARING FOR AUTOPATCHING DECNET
Before preparing this product for Autopatching, you should install
the product on your system as described in the installation
documentation supplied on the product distribution tape. Unless
the product is correctly installed, you will not be able to SELECT
it for Autopatching.
The disk directory in which you have installed the executable files
for DECNET-10-V703 is referred to as the product installation
directory. In most cases this will be [1,4] or one of the
directories belonging to SYS:. This directory must contain the
files:
CTHNRT.EXE
FAL.EXE
NFT.EXE
NML.EXE
You will need to copy the following files from the TOPS-10 DECNET
7.03 distribution tape BB-X116B-SB into the disk directory you have
set up as the DECNET-10 distribution directory.
From the first save set
DECNET.FIL CTHNRT.MAC NFT.MAC FAL.MAC
NIP.MAC TSC.MAC
From the third save set
DNADDL.MAC D36COM.MAC LLINKS.MAC NRTSER.MAC
NTMAN.MAC ROUTER.MAC SCLINK.MAC SCMUUO.MAC
SCPAR.MAC
An indirect command file to perform this operation has been
included in the installation save set on this patch tape. This
file will restore the appropriate files to DSKP:[7,6,DECNET]. If
you wish to use this command file, but are not using
DSKP:[7,6,DECNET] as your distribution directory you will have to
edit this command file to change the /RESTORE command to correspond
to your directory.
To use this command file, issue the following commands:
.R BACKUP
/TAPE tape:
/@DSKP:DEC703.CCL[7,6]
This product maintains the monitor modules which provide support
for DECNET. When selecting the MONITOR-10 product for Autopatching
you should include the DIS: for DECNET as part of your path
definition for DIS: for the MONITOR-10 product. For example,
DSKP:[7,6,MON],DSKP:[7,6,DECNET].
Page 19
The Autopatch product description file for this product is supplied
in the Installation Save-set on the Autopatch tape. See the last
section of this document for a listing of this file. There is a
BACKUP command file provided in the first Save-set which will
restore this file to the proper directory. See the README
documentation file in the first Save-set for more information.
Page 20
3.8 PREPARING FOR AUTOPATCHING FORTRAN-10
Before preparing this product for Autopatching, you should install
the product on your system as described in the installation
documentation supplied on the product distribution tape. Unless
the product is correctly installed, you will not be able to SELECT
it for Autopatching.
The disk directory in which you have installed the executable files
for FORTRAN-10 is referred to as the product installation
directory. In most cases this will be [1,4] or one of the
directories belonging to SYS:. This directory must contain the
files:
FORTRA.EXE SINGLE.EXE FORTB.EXE FORTC.EXE
FORTD.EXE FORTE.EXE FORTF.EXE FORTG.EXE
DORTRA.EXE DORTB.EXE DOTRC.EXE DORTD.EXE
DORTE.EXE DORTF.EXE DORTG.EXE FORO11.EXE
FORLIB.REL FORDDT.REL
The FORTRAN V11 product may be patched via source file updates with
re-build and/or via encrypted EXE/REL file replacement. If you
desire to use encryption then KEY files must be retrieved from the
FORTRAN distribution tape. You will need to copy the following
files from the FORTRAN-10 V11 distribution tape BB-D480G-SB into
the disk directory you have set up as the FORTRAN-10 distribution
directory.
From the save set "FORTRAN-AUTOPATCH"
FORTRA.KEY SINGLE.KEY FORTB.KEY FORTC.KEY
FORTD.KEY FORTE.KEY FORTF.KEY FORTG.KEY
DORTRA.KEY DORTB.KEY DOTRC.KEY DORTD.KEY
DORTE.KEY DORTF.KEY DORTG.KEY FORO11.KEY
FORLIB.KEY FORDDT.KEY
If you are also using DBMS with FORTRAN you will need the
FORDBM.REL file from the fourth save-set of the FORTRAN v11
distribution tape and the DBCS1F.CMD file from the second save-set
of the Autopatch tape.
If you desire to Autopatch FORTRAN via updated sources the
following files are required to build the FORTRAN product. They
must be available either in the patching area (PAT:), the
distribution area (DIS:), or in the installation area (INS:).
From the first save-set of the Autopatch tape
GLXMAC.UNV HELPER.REL MACTEN.UNV QSRMAC.UNV
RMSINT.UNV SCAN.REL SCNMAC.UNV UUOSYM.UNV
These files will be moved from the Autopatch tape when you use one
of the BACKUP CCL files described in the README file.
You will need to copy the following files from the FORTRAN-10
Page 21
distribution tape BB-D480G-SB into the disk directory you have set
up as the FORTRAN-10 distribution directory.
From save set FORTRAN-OTS-DEBUGGER
F10REL.MAC FDBMH5.MAC FDBML5.MAC FDBML6.MAC
FDDT.MAC FORBOT.MAC FORCHR.MAC FORCNV.MAC
FORCOM.MAC FORDBM.MAC FORDDT.MAC FORDST.MAC
FORDUM.MAC FORERR.MAC FORFMT.MAC FORHST.MAC
FORINI.MAC FORIO .MAC FORMEM.MAC FORMSC.MAC
FORMSG.MAC FORNML.MAC FOROP .MAC FOROPN.MAC
FOROTS.MAC FORPL2.MAC FORPRM.MAC FORPSE.MAC
FORRMS.MAC FORRTF.MAC FORSRT.MAC FORXIT.MAC
M10REL.MAC MTHARG.MAC MTHCDX.MAC MTHCGX.MAC
MTHCNV.MAC MTHCPX.MAC MTHDBL.MAC MTHDUM.MAC
MTHGDB.MAC MTHHST.MAC MTHMSG.MAC MTHPRM.MAC
MTHSNG.MAC MTHTRP.MAC
F10LIB.CCL F10OTS.CCL FDBM5 .CCL
FORPL1.FOR
From save set FORTRAN-COMPILER
ACT0 .BLI ACT1 .BLI ALCBLO.BLI ARRXPN.BLI
ASHELP.BLI BLIO .BLI BUILD .BLI CANNON.BLI
CGDO .BLI CGEXPR.BLI CGSTMN.BLI CMPBLO.BLI
CMPLEX.BLI CODETA.BLI COMSUB.BLI DATAST.BLI
DEBUG .BLI DEFLT .BLI DEFPT .BLI DOALC .BLI
DOXPN .BLI DRIVER.BLI ERROR0.BLI ERROUT.BLI
ERROVA.BLI ERROVB.BLI ERROVC.BLI ERROVD.BLI
ERROVG.BLI ERROVR.BLI EXPRES.BLI FAZ1 .BLI
FIRST .BLI FMTLEX.BLI FORMAT.BLI GCMNSB.BLI
GLOBAL.BLI GNRCFN.BLI GOPT2 .BLI GOPTIM.BLI
GRAPH .BLI INOUT .BLI INPT .BLI IOFLG .BLI
IOPT .BLI LEFT72.BLI LEFTFM.BLI LEXAID.BLI
LEXICA.BLI LEXNAM.BLI LEXSUP.BLI LISTNG.BLI
LISTOU.BLI MAIN .BLI MEMCMP.BLI MOVA .BLI
NUMIO1.BLI OPTAB .BLI OPTMAC.BLI OUTMOD.BLI
OUTZ .BLI P2S1 .BLI P2S2 .BLI P3R .BLI
PEEPOP.BLI PH2S .BLI PH3G .BLI PHA2 .BLI
PHA3 .BLI PNROPT.BLI REGAL2.BLI REGUTL.BLI
RELBUF.BLI REQREL.BLI SCAN0 .BLI SCNR .BLI
SKSTMN.BLI SRCA .BLI STA0 .BLI STA1 .BLI
STA2 .BLI STA3 .BLI STREGA.BLI TABLES.BLI
TBL .BLI TRACE1.BLI TSTR .BLI UNEND .BLI
UTIL .BLI VER5 .BLI VLTPPR.BLI
CNSTCM.MAC COMMAN.MAC DGCMN .MAC DNPT .MAC
DOPT .MAC ERR3 .MAC ERRTB3.MAC EXOSUP.MAC
FLTGEN.MAC GFOPDF.MAC JOBD .MAC OPGNTA.MAC
OWNDM .MAC QTAB1 .MAC REVHST.MAC
A .CMD ALL .CMD B .CMD BLD .CMD
C .CMD D .CMD E .CMD F .CMD
G .CMD DA .CMD DB .CMD DC .CMD
DD .CMD DE .CMD DF .CMD DG .CMD
LEFT72.CMD LEFTFM.CMD
F72BNF.SYN FRMBNF.SYN
Page 22
From save set FORTRAN-TOOLS
BLIS10.ERR BLIS10.EXE QSRMC2.UNV
An indirect command file to perform this operation has been
included in the installation save set on this patch tape. This
file will restore the appropriate files to DSKP:[7,6,FTN]. If you
wish to use this command file, but are not using DSKP:[7,6,FTN] as
your distribution directory you will have to edit this command file
to change the /RESTORE command to correspond to your directory.
To use this command file, issue the following commands:
.R BACKUP
/TAPE tape:
/@DSKP:FTN111.CCL[7,6]
for source file updating
.R BACKUP
/TAPE tape:
/@DSKP:FTN1X1.CCL[7,6]
for EXE/REL replacement updating
If you use DBMS with FORTRAN and want to have the Autopatch Patch
and Build Control file build DBMSF you must create a dummy file in
the patching directory (PAT:) called FTNDBM.FLG. The presence of
this file on PAT: will cause the BATCH control file to branch in
order to perform the processing required to build DBMSF.EXE. You
will also need the DBCS1F.CMD file from the second save-set of the
Autopatch tape.
The Patch and Build control file and utility command files for the
re-build of this product as well as the Autopatch product
description file are supplied in the Installation Save-set on the
Autopatch tape. See the last section of this document for a list
of these files. There is a BACKUP command file provided in the
first Save-set which will restore these files to the proper
directory. See the README documentation file in the first Save-set
for more information.
Page 23
3.9 PREPARING FOR AUTOPATCHING GALAXY-10
Before preparing this product for Autopatching, you should install
the product on your system as described in the installation
documentation supplied on the product distribution tape. Unless
the product is correctly installed, you will not be able to SELECT
it for Autopatching.
The disk directory in which you have installed the executable files
for GALAXY-10 is referred to as the product installation directory.
In most cases this will be [1,4] or one of the directories
belonging to SYS:. This directory must contain the files:
BATCON.EXE ORION.EXE
CDRIVE.EXE PLEASE.EXE
GALGEN.EXE PULSAR.EXE
GLXLIB.EXE QUASAR.EXE
GLXLIB.REL QUEUE.EXE
LPTSPL.EXE SPRINT.EXE
MOUNT.EXE
OPR.EXE
GALCNF.MAC OPRPAR.REL
GALCNF.UNV ORNMAC.UNV
GLXMAC.UNV QSRMAC.UNV
MNTMAC.UNV
MNTPAR.REL
The following files are required to build the GALAXY product. They
must be available either in the patching area (PAT:), the
distribution area (DIS:), or in the installation area (INS:).
From the first save-set of the Autopatch tape
ACTLIB.REL ACTSYM.UNV CATPRM.UNV CATTAB.REL
D60JSY.REL D60UNV.UNV HELPER.REL LCPORN.REL
LCPTAB.REL SCAN.REL SCNMAC.UNV UFDPRM.UNV
UFDSET.REL UUOSYM.UNV WILD.REL
These files will be moved from the Autopatch tape when you use one
of the BACKUP CCL files described in the README file.
You will need to copy the following files from the TOPS-10 7.03A
CUSP UPDATE distribution tape BB-JF24A-BB into the disk directory
you have set up as the GALAXY-10 distribution directory.
BATCON.MAC BATCTL.MAC BATLOG.MAC BATMAC.MAC
BATPTY.MAC BATUSR.MAC CDRIVE.MAC CNFORN.MAC
CNFTAB.MAC GALGEN.MAC GLXCOM.MAC GLXFIL.MAC
GLXFUN.MAC GLXINI.MAC GLXINT.MAC GLXIPC.MAC
GLXKBD.MAC GLXLNK.MAC GLXMAC.MAC GLXMEM.MAC
GLXOTS.MAC GLXSCN.MAC GLXTXT.MAC GLXUTL.MAC
GLXVER.MAC LPTD60.MAC LPTL01.MAC LPTLP5.MAC
LPTMAC.MAC LPTMTA.MAC LPTSPL.MAC MNTMAC.MAC
MNTPAR.MAC MOUNT.MAC OPR.MAC OPRCMD.MAC
Page 24
OPRERR.MAC OPRLOG.MAC OPRNET.MAC OPRPAR.MAC
OPRQSR.MAC ORION.MAC ORNMAC.MAC PLEASE.MAC
PLRDSK.MAC PLRDSP.MAC PLRDTA.MAC PLRINI.MAC
PLRLBP.MAC PLRMAC.MAC PLROPR.MAC PLRQUO.MAC
PLRT10.MAC PLRTAP.MAC PULSAR.MAC QSRADM.MAC
QSRALC.MAC QSRCAT.MAC QSRDSP.MAC QSRFSS.MAC
QSRINF.MAC QSRIPC.MAC QSRMAC.MAC QSRMDA.MAC
QSRMEM.MAC QSRNET.MAC QSRQUE.MAC QSRSCH.MAC
QSRT10.MAC QUASAR.MAC QUEUE.MAC QUOPRM.MAC
QUOTAB.MAC QUOTAB.REL SPRINT.MAC
An indirect command file to perform this operation has been
included in the installation save set on this patch tape. This
file will restore the appropriate files to DSKP:[7,6,CSP]. If you
wish to use this command file, but are not using DSKP:[7,6,CSP] as
your distribution directory you will have to edit this command to
change the /RESTORE command to correspond to your directory.
To use this command file, issue the following commands:
.R BACKUP
/TAPE tape:
/@DSKP:GAL703.CCL[7,6]
The Patch and Build control file for the re-build of this product
as well as the Autopatch product description file are supplied in
the Installation Save-set on the Autopatch tape. See the last
section of this document for a list of these files. There is a
BACKUP Retrieval Command File provided in the first Save-set which
will restore these files to the proper directory. See the README
documentation file in the first Save-set for more information.
Page 25
3.10 PREPARING FOR AUTOPATCHING IBMCOM-10
Before preparing this product for Autopatching, you should install
the product on your system as described in the installation
documentation supplied on the product distribution tape. Unless
the product is correctly installed, you will not be able to SELECT
it for Autopatching.
The disk directory in which you have installed the executable files
for IBMCOM-10 is referred to as the product installation directory.
In most cases this will be [1,4] or one of the directories
belonging to SYS:. This directory must contain the files:
HASP only
D6LQ3.BIN D6LQH.BIN
D6LQ3.EXE D6LQH.EXE
D6LQ3D.BIN D6LQHD.BIN
D6LQ3D.EXE D6LGHD.EXE
D6TK3.BIN D6TKH.BIN
D6TK3.EXE D6TKH.EXE
D6TK3D.BIN D6TKHD.BIN
D6TK3D.EXE D6TKHD.EXE
D6TQ3.BIN D6TQH.BIN
D6TQ3.EXE D6TQH.EXE
D6TQ3D.BIN D6TQHD.BIN
D6TQ3D.EXE D6TQHD.EXE
IBMSPL.EXE
D60SPD.EXE
The following files are required to build the IBMCOM product. They
must be available either in the patching area (PAT:), the
distribution area (DIS:), or in the installation area (INS:).
From the first save-set of the Autopatch tape
ACTSYM.UNV D60JSY.REL D60UNV.UNV GLXLIB.REL
GLXMAC.UNV HELPER.REL JOBDAT.UNV MACTEN.UNV
ORNMAC.UNV QSRMAC.UNV UUOSYM.UNV
These files will be moved from the Autopatch tape when you use one
of the BACKUP CCL files described in the README file.
From a GALAXY build or installation you must have the GALCNF.UNV
file available in PAT:, DIS:, or INS:.
You will need to copy the following files from the TOPS-10 IBMCOM
distribution tape BB-J992D-SB (ET) or BB-V552B-SB (HASP) into the
disk directory you have set up as the IBMCOM-10 distribution
directory.
HASP only
Page 26
10TK3.P11 10TKH.P11
CHK60.P11
D60SPD.MAC
D6LQ3.P11 D6LQH.P11
D6TQ3.P11 D6TQH.P11
DEBUG.P11
HBSC.P11
IBMMAC.MAC
IBMPAT.MAC
IBMSPL.MAC
IBMUSR.MAC
INIT.P11
INIT1.P11
INIT2.P11
LINDRV.P11
*MACROS.P11
MDCODE.P11
MININT.P11
MSGHDL.P11
PROD.P11
QUEING.P11
S60.P11
STGMAN.P11
TRNTAB.P11
XDEFIN.P11
XDTE10.P11
XDISPA.P11
XDL10.P11
XL3780.P11 XLHASP.P11
XTENCM.P11
DDT11.EXE
MACDLX.EXE
* Renamed as MACRO.P11 in the distribution directory
An indirect command file to perform this operation has been
included in the installation save set on this patch tape. This
file will restore the appropriate files to DSKP:[7,6,IBMET] or
DSKP:[7,6,IBMHSP]. If you wish to use this command file, but are
not using the indicated SFD as your distribution directory you will
have to edit this command file to change the /RESTORE command to
correspond to your directory. If you do not use this command file
then the MACROS.P11 file in the distribution directory must be
renamed or copied to be MACRO.P11 before the product can be
SELECTED.
To use this command file, issue the following commands:
.R BACKUP
/TAPE tape:
/@DSKP:IETV04.CCL[7,6] for IBMCOM-10-ET-V4
or
/@DSKP:IHSV01.CCL[7,6] for IBMCOM-10-HASP-V1
Page 27
The Patch and Build control file for the re-build of this product
as well as the Autopatch product description file are supplied in
the Installation Save-set on the Autopatch tape. See the last
section of this document for a list of these files. There is a
BACKUP command file provided in the first Save-set which will
restore these files to the proper directory. See the README
documentation file in the first Save-set for more information.
Page 28
3.11 PREPARING FOR AUTOPATCHING MCB-10
Before preparing this product for Autopatching, you MUST install
the product on your system as described in the DECnet-10 Network
Generation and Installation Procedures Manual (AA-P379A-TB) in
Notebook 20 of the TOPS-10 Notebook set. Unless the product is
correctly installed, you will not be able to SELECT it for
Autopatching.
The disk directory in which you have installed the executable files
for MCB-10 is referred to as the product installation directory.
In most cases this will be [1,4] or one of the directories
belonging to SYS:. This directory must contain the files:
DNMAC.EXE
DTEDMP.SYS
DTEMPS.SYS
DTEMPT.SYS
NETGEN.EXE
NIPGEN.EXE
TKB36.EXE
VNP36.EXE
nodename.SYS
nodename.SYS is the front end system file with your node name
The following files are required to build the MCB product. They
must be available either in the patching area (PAT:), the
distribution area (DIS:), or in the installation area (INS:).
From the first save-set of the Autopatch tape
GLXMAC.UNV ORNMAC.UNV MACSYM.UNV UUOSYM.UNV
GLXLIB.REL
These files will be moved from the Autopatch tape when you use one
of the BACKUP CCL files described in the README file.
You will need to copy all of the files in the second save set of
the TOPS-10 DECNET 7.03 distribution tape BB-X116B-SB into the disk
directory you have set up as the MCB-10 distribution directory.
These files should already exist in a disk directory as part of the
original DECNET-10 installation. If not, they are on the second
save set on the distribution tape.
From the second save set - MCB MODULES
CEX.STB CEX.TSK CEXCOM.STB CEXCOM.TSK
DCP.STB DCP.TSK DMC.STB DMC.TSK
DMR.STB DMR.TSK DTE.STB DTE.TSK
DTR.STB DTR.TSK INI.STB INI.TSK
KDP.STB KDP.TSK MDT.STB MDT.STK
NDT.STB NDT.TSK NML.STB NML.TSK
NMS.STB NMS.TSK NMX.STB NMX.TSK
Page 29
NS1.STB NS1.TSK NS2.STB NS2.TSK
NSP.STB NSP.TSK RSX11S.STB RSX11S.TSK
SC.STB SC.TSK SC1.STB SC1.TSK
SCX.STB SCX.TSK TLI.STB TLI.TSK
TOP.STB TOP.TSK XPE.STB XPE.TSK
XPT.STB XPT.TSK RSXMS.STB
CEXLIB.M11 CEXLLC.M11 DATML.M11 DCPDLC.M11
DMCDLC.M11 DMRDLC.M11 DTEDLC.M11 DTRLLC.M11
INILLC.M11 KDPDDM.M11 MCBLIB.M11 NMTAB.M11
NMXLLC.M11 NSTAB.M11 NSPLLC.M11 RSXLIB.M11
SCLLC.M11 SCXLLC.M11 TOPLLC.M11 XPTLLC.M11
MCBLIB.OLB SYSLIB.OLB
NGNDIA.MAC NGNFIN.MAC NGNCNF.MAC NGNDAT.MAC
NGNDEV.MAC NETGEN.MAC NGNMAC.MAC NGNPRM.MAC
NGNPRS.MAC NIPGEN.MAC
An indirect command control file to retrieve these files has been
included in the installation save set on this patch tape. This
file will restore the appropriate files to DSKP:[7,6,DECNET]. If
you wish use this control file, but are not using DSKP:[7,6,DECNET]
as your distribution directory you will have to edit this command
file to change the /RESTORE command to correspond to your
directory.
To use this command file, issue the following commands:
.R BACKUP
/TAPE tape:
/@DSKP:DEC703.CCL[7,6]
This command file will also restore the files necessary for the
DECNET modules of the MONITOR and the files for DECNET UTILITIES.
If you have previously Autopatched the DECNET monitor modules and
UTILITIES you are advised to use the MCB703.CCL file to load the
MCB-10 files and NOT the DEC703.CCL file.
The DECNET-10 front end build also requires the following files
from the original installation:
CETAB.MAC
NETPAR.MAC
NMLACC.MAC
The above files are NOT on the release tape. They are created
during the required installation process. NMLACC.MAC is deleted
after a successful front end build to protect the Network
Management Access Control information it contains. Path to the
directory in which your front end was built and do the following:
.R NETGEN
NETGEN>RESTORE xxxxxx.CNF
Page 30
;where xxxxxx is your front end node
;name. The configuration file (.CNF)
;was automatically saved when you did
;the original installation.
;If your site doesn't use Network Management Access Control
;skip the following 3 DEFINE commands
NETGEN>DEFINE EXECUTOR MANAGEMENT USER foo1
NETGEN>DEFINE EXECUTOR MANAGEMENT PASSWORD foo2
NETGEN>DEFINE EXECUTOR MANAGEMENT ACCOUNT foo2
NETGEN>FINISH
Copy CETAB.MAC and NETPAR.MAC into the MCB-10 Autopatch
distribution directory. If you wish the protection of having the
NMLACC.MAC file deleted after a successful build, rename it into
the directory you have set up as the patching directory, and the
above procedure will be required before each Autopatch update of
MCB-10. Otherwise, copy NMLACC.MAC into the MCB-10 Autopatch
distribution directory.
When SELECTing this product for Autopatching the PEP program will
ask for the nodename. Use the same name as was used during the
initial installation. If your product installation directory
(INS:) does not include the front end system image, usually
"nodename".SYS, then copy it into that directory.
Path back to your original directory.
The Patch and Build control file for the re-build of this product
as well as the Autopatch product description file are supplied in
the Installation Save-set on the Autopatch tape. See the last
section of this document for a list of these files. There is a
BACKUP command file provided in the first Save-set which will
restore these files to the proper directory. See the README
documentation in the first Save-set for more information.
Page 31
3.12 PREPARING FOR AUTOPATCHING MONITOR-10-V703
Before preparing this product for Autopatching, you should install
the product on your system as described in the installation
documentation supplied on the product distribution tape. Unless
the product is correctly installed, you will not be able to SELECT
it for Autopatching.
The disk directory in which you have installed the executable files
for TOPS-10 is referred to as the product installation directory.
In most cases this will be [1,4] or one of the directories
belonging to SYS:. This directory must contain the files:
MON.EXE
MONGEN.EXE
TOPS10.REL
The MON.EXE file is a copy of your current monitor. The Autopatch
process will create a new MON.EXE in the installation
directory(INS:).
The following file is required to build the MONITOR product. It
must be available either in the patching area (PAT:), the
distribution area (DIS:), or in the installation area (INS:).
From the first save-set of the Autopatch tape
EDDT.REL
This file will be moved from the Autopatch tape when you use one of
the BACKUP CCL files described in the README file.
You will need to copy the following files from the TOPS-10 7.03
BB-X140B-SB Distribution tape, and BB-FP63A-SB/BB-X128B-SB CUSP
tape into the disk directory you have set up as the MONITOR-10
distribution directory.
From the 7.03 MONITOR dsitribution tape
AUTCON.MAC CLOCK1.MAC COMCON.MAC COMDEV.MAC
COMMOD.MAC COMMON.MAC COMNET.MAC CORE1.MAC
CTXSER.MAC D36PAR.MAC D60SER.MAC D6SINT.MAC
D8KINT.MAC D8SINT.MAC DATMAN.MAC DLPSER.MAC
DTEPRM.MAC DTESER.MAC DX2COM.MAC DZINT.MAC
ERRCON.MAC ETHPRM.MAC ETHSER.MAC ETHUUO.MAC
FEDSER.MAC FILFND.MAC FILIO.MAC FILUUO.MAC
FTEJBD.MAC ICHPRM.MAC IPCSER.MAC KLPPRM.MAC
KLPSER.MAC KLSER.MAC KNIPRM.MAC KNISER.MAC
KONPAR.MAC KSSER.MAC LATSER.MAC LLMOP.MAC
LLMPRM.MAC LOKCON.MAC LP2SER.MAC LPTSER.MAC
MONBTS.MAC MONEND.MAC MONGEN.MAC MONPFH.MAC
MOSSER.MAC MSCCOM.MAC MSCPAR.MAC MSGSER.MAC
NETDEV.MAC NETPRM.MAC NETSER.MAC NULFEK.MAC
ONCE.MAC ONCMOD.MAC PATCH.MAC PSISER.MAC
Page 32
PTYSER.MAC QUESER.MAC RAXKON.MAC REFSTR.MAC
RHXKON.MAC RNXKON.MAC RPXKON.MAC RTTRP.MAC
S.MAC SCASER.MAC SCAPRM.MAC SCHED1.MAC
SCNSER.MAC SCSUUO.MAC SEGCON.MAC SWPSER.MAC
SYSINI.MAC T78KON.MAC TAPSER.MAC TAPUUO.MAC
TD2KON.MAC TM2KON.MAC TMPUUO.MAC TTDINT.MAC
UUOCON.MAC VMSER.MAC
FGEN.HLP
COMPIL.CTL BUILD.CTL TREE.TEC TOPS10.TEC
TOPS10.FIL
From the 7.03 CUSP tape
JOBDAT.MAC MACSYM.MAC UUOSYM.MAC
Indirect command files to perform this operation have been included
in the installation save set on this patch tape. These files will
restore the appropriate files to DSKP:[7,6,MON]. If you wish to
use these command files, but are not using DSKP:[7,6,MON] as your
distribution directory you will have to edit these command files to
change the /RESTORE command to correspond to your directory.
To use these command files, issue the following commands:
.R BACKUP
/TAPE tape:
/@DSKP:MON703.CCL[7,6] for the 7.03 distribution tape
and
/@DSKP:CSP703.CCL[7,6] for the 7.03 CUSP tape
The following files are created by running GEN at your site and are
a required part of the build procedure. They should be put in the
Autopatch distribution directory for the monitor.
F.MAC
HDWCNF.MAC
NETCNF.MAC
The following files must be in PAT: when the monitor is
Autopatched:
BUILDS.DCL BUILDS.PTH TOPS10.CCL TOPS10.CMD
It is expected that you will place a customized copy of BUILDS.PTH
in PAT:. Please observe the following rules. First, you MUST
specify directories other then PAT: for the REL (FGEN) and EXE
(BUILD) areas. The START.CTL procedure creates a START.MIC file
which deletes all entries in these areas. Second, you should use
explicit structures and PPNs when defining areas for FGEN, BUILD
and BASE:. Third, the distributed START.CTL will delete all *.LOG
files in BASE:. A revised START.CTL with that command commented
out can be found in the second save-set of the Autopatch tape.
Fourth, you must include your definition of PAT: and DIS: in the
Page 33
definition of CTLS: and MON:. Lastly, invoking START.CTL is
required before you can select MONITOR-10 since several files are
created. A minimum BUILDS.PTH for building a monitor can be found
in the second save-set of the Autopatch tape.
The MPE, DECNET and Customer Supported options to the TOPS-10
Monitor, if used, must be autopatched before the Control file to
build the monitor is submitted.
The Patch and Build control file for the re-build of this product
as well as the Autopatch product description file are supplied in
the Installation Save-set on the Autopatch tape. See the last
section of this document for a list of these files. There is a
BACKUP command file provided in the first Save-set which will
restore these files to the proper directory. See the README
documentation file in the first Save-set for more information.
Page 34
3.13 PREPARING FOR AUTOPATCHING MPE-10
You will need to copy the following file from the TOPS-10 MPE 7.03
distribution tape BB-X133B-SB into the disk directory you have set
up as the MONITOR-10 distribution directory.
From the first save set
CPNSER.MAC
MPE.FIL
An indirect command file to perform this operation has been
included in the installation save set on this patch tape. This
file will restore the appropriate files to DSKP:[7,6,MON]. If you
wish to use this command file, but are not using DSKP:[7,6,MON] as
your distribution directory you will have to edit this command file
to change the /RESTORE command to correspond to your directory.
To use this command file, issue the following commands:
.R BACKUP
/TAPE tape:
/@DSKP:MPE703.CCL[7,6]
The Autopatch product description file for this product is supplied
in the Installation Save-set on the Autopatch tape. See the last
section of this document for a listing of this file. There is a
BACKUP command file provided in the first Save-set which will
restore this file to the proper directory. See the README
documentation file in the first Save-set for more information.
Page 35
3.14 PREPARING FOR AUTOPATCHING MS-10
Before preparing this product for Autopatching, you should install
the product on your system as described in the installation
documentation supplied on the product distribution tape. Unless
the product is correctly installed, you will not be able to SELECT
it for Autopatching.
The disk directory in which you have installed the executable files
for MS-10 is referred to as the product installation directory. In
most cases this will be [1,4] or one of the directories belonging
to SYS:. This directory must contain the files:
MS.EXE MS.HLP MX.EXE
The MS V11 product may be patched via source file updates or via
EXE file replacement. If you desire to update sources you will
need to copy the following files from the TOPS-10 7.03A CUSP Update
distribution tape BB-JF24A-BB into the disk directory you have set
up as the MS-10 distribution directory.
From the SFD [10,7,DECMAI,MS]
MS.MAC MSCNFG.MAC MSDLVR.MAC MSDSPL.MAC
MSFIL.MAC MSGUSR.MAC MSHOST.MAC MSLCL.MAC
MSMCMD.MAC MSNET.MAC MSSEQ.MAC MSTXT.MAC
MSUNV.MAC MSUTL.MAC MSUUO.MAC MSVER.MAC
From the SFD [10,7,DECMAI,MX]
MXNIPC.B36** MXNNET.B36 MXNPAG.B36 NEWT10.B36
MXDATA.BLI MXDCNT.BLI MXERR.BLI MXHOST.BLI
MXLCL.BLI MXNINT.BLI* MXNMEM.BLI MXNQUE.BLI
MXNSKD.BLI MXNTBL.BLI MXNTXT.BLI MXQMAN.BLI
MXUFIL.BLI TBL.BLI
MXNLIB.L36 MXLIB.L36 TBL.L36
CPYRYT.MAC LISVAX.MAC MXNT10.MAC MXVER.MAC
NETTAB.MAC SENVAX.MAC SMTLIS.MAC SMTSEN.MAC
BLT.R36 MXNT10.R36
MXDATA.REL MXDCNT.REL MXERR.REL MXHOST.REL
MXLCL.REL MXNINT.REL* MXNIPC.REL** MXNMEM.REL
MXNNET.REL MXNPAG.REL MXNQUE.REL MXNSKD.REL
MXNTBL.REL MXNTXT.REL MXQMAN.REL MXUFIL.REL
TBL.REL
MXCNDT.REQ MXDBUG.REQ MXERR.REQ MXINI.REQ
MXLCL.REQ MXLIB.REQ MXNCMI.REQ MXNCOM.REQ
MXNLIB.REQ MXNRCH.REQ MXNRSP.REQ MXNSTR.REQ
MXNTLB.REQ MXPORT.REQ MXQMAN.REQ MXSTYP.REQ***
MXUFIL.REQ TBL.REQ
* MXNINT.* is renamed to be M10INT.*
** MXNIPC.* is renamed to be M10IPC.*
*** MXSTYP.* is renamed to be M10TYP.*
An indirect command file to perform this operation has been
Page 36
included in the installation save set on this patch tape. This
file will restore the appropriate files to DSKP:[7,6,CSP]. If you
wish to use this command file, but are not using DSKP:[7,6,CSP] as
your distribution directory you will have to edit this command file
to change the /RESTORE command to correspond to your directory.
To use this command file, issue the following commands:
.R BACKUP
/TAPE tape:
/@DSKP:MS1S11.CCL[7,6]
for source file updating
Please note that the Autopatch process does NOT rebuild MS from
sources. Autopatch can replace the EXE files and/or update the
sources. Also, note that the file renames that are noted above
will require a change to the supplied MX10.CTL file before a
customer build from sources.
The Patch and Build control file for the update of this product as
well as the Autopatch product description file are supplied in the
Installation Save-set on the Autopatch tape. See the last section
of this document for a list of these files. There is a BACKUP
command file provided in the first Save-set which will restore
these files to the proper directory. See the README documentation
file in the first Save-set for more information.
Page 37
3.15 PREPARING FOR AUTOPATCHING SORT-10
Before preparing this product for Autopatching, you should install
the product on your system as described in the installation
documentation supplied on the product distribution tape. Unless
the product is correctly installed, you will not be able to SELECT
it for Autopatching.
The disk directory in which you have installed the executable files
for SORT-10 is referred to as the product installation directory.
In most cases this will be [1,4] or one of the directories
belonging to SYS:. This directory must contain the files:
SORT.EXE
FSORT.EXE
The following files are required to build the SORT product. They
must be available either in the patching area (PAT:), the
distribution area (DIS:), or in the installation area (INS:).
From the first save-set of the Autopatch tape
HELPER.REL MACTEN.UNV SCAN.REL SCNMAC.UNV
UUOSYM.UNV
These files will be moved from the Autopatch tape when you use one
of the BACKUP CCL files described in the README file.
You will need to copy the following files from the SORT-10
distribution tape BB-D489F-SB or from the COBOL-10 distribution
tape into the disk directory you have set up as the SORT-10
distribution directory.
From save set SORT-SOURCE
SORT.MAC SRTFLT.MAC SRTCBL.MAC SRTPRM.MAC
SRTCER.MAC SRTSCN.MAC SRTCMP.MAC SRTSTA.MAC
SRTUUO.MAC
An indirect command file to perform this operation has been
included in the installation save set on this patch tape. This
file will restore the appropriate files to DSKP:[7,6,SRT]. If you
wish to use this command file, but are not using DSKP:[7,6,SRT] as
your distribution directory you will have to edit this command file
to change the /RESTORE command to correspond to your directory.
To use this command file, issue the following commands:
.R BACKUP
/TAPE tape:
/@DSKP:SRTV4D.CCL[7,6]
This command file is valid for use ONLY with the separate SORT
distribution tape. Use of the COBOL CCL file will load the SORT
files from the COBOL distribution tape into DSKP:[7,6,SRT].
Page 38
The Patch and Build control file for the re-build of this product
as well as the Autopatch product description file are supplied in
the Installation Save-set on the Autopatch tape. See the last
section of this document for a list of these files. There is a
BACKUP command file provided in the first Save-set which will
restore these files to the proper directory. See the README
documentation file in the first Save-set for more information.
Page 39
3.16 PREPARING FOR AUTOPATCHING UTILITIES-10
Before preparing this product for Autopatching, you should install
the product on your system as described in the installation
documentation supplied on the product distribution tape. Unless
the product is correctly installed, you will not be able to SELECT
it for Autopatching.
The disk directory in which you have installed the executable files
for UTILITIES-10 is referred to as the product installation
directory. In most cases this will be [1,4] or one of the
directories belonging to SYS:. This directory must contain the
files:
ACTDAE.EXE ACTLIB.REL ACTPRM.UNV ACTSYM.UNV
BACKUP.EXE BOOT.EXB BOOT.EXE BOOTM.EXE
BOOTML.EXB BOOTMS.EXE BTDDT.EXE BTONCE.EXE
BTSPRM.UNV CAM.EXE CATLOG.EXE CATTAB.REL
COMP10.EXE COMPIL.EXE CONV10.EXE CREDIR.EXE
CREF.EXE CRSCPY.EXE D60JSY.REL D60UNV.UNV
DAEMON.EXE DDT.EXE DDT.REL DDT11.EXE
DECLAR.EXE DELFIL.EXE DIL.LIB DIL.REL
DILV7.FOR DITV7.FOR DIXV7.FOR DIRECT.EXE
DSKLST.EXE DSKRAT.EXE DTELDR.EXE EDDT.REL
FE.EXE FED.EXE FEFILE.EXE FILCOM.EXE
FILDAE.EXE FILDDT.EXE GLOB.EXE HELP.EXE
HELPER.REL INITIA.EXE JOBDAT.REL JOBDAT.UNV
KDPLDR.EXE KNILDR.EXE KSBOOT.EXE LCPORN.REL
LCPTAB.REL LINK.EXE LNK999.EXE LNKERR.EXE
LNKLOD.EXE LNKMAP.EXE LNKOV1.EXE LNKOV2.EXE
LNKSCN.EXE LNKXIT.EXE LOGIN.EXE LOGOUT.EXE
MACDLX.EXE MACRO.EXE MACSYM.UNV MACTEN.REL
MACTEN.UNV MAKLIB.EXE MAKVFU.EXE NCPTAB.REL
NETLDR.EXE NETWOR.EXE NEWACT.EXE NOTIFY.EXE
OVRLAY.REL PIP.EXE PROJCT.EXE QUOLST.EXE
REACT.EXE RMS.EXE RMS.REL RMSCOB.EXE
RMSINI.REL RMSUTL.EXE RSXT10.EXE RUNOFF.EXE
SCAN.REL SCOMM.EXE SCDSET.EXE SETSRC.EXE
SPEAR.EXE SPRCOM.EXE SPRINS.EXE SPRKLE.EXE
SPRRET.EXE SPRSUM.EXE SWIL.REL SWIL.UNV
SYSANS.EXE SYSDLT.EXE SYSDPA.EXE SYSDPB.EXE
SYSDPY.EXE SYSHZL.EXE SYSTAT.EXE SYSV50.EXE
SYSV52.EXE SYSV61.EXE SYSVBX.EXE TECO.EXE
TGHA.EXE UFDSET.REL UFDPRM.UNV UUOSYM.REL
UUOSYM.UNV VMDDT.EXE WILD.REL XPORT.REL
You will need to copy the following files from the TOPS 10 V7.03
CUSP BB-FP63A-SB/BB-X128B-SB distribution tape into the disk
directory you have set up as the UTILITIES-10 distribution
directory.
10K.MAC 10KIMP.MAC ACTCUS.MAC ACTDAE.MAC
ACTLIB.MAC ACTRCD.MAC ACTSYM.MAC BACKRS.MAC
BACKUP.MAC BOOT.MAC BOOTM.MAC CAMCTL.MAC
CAMIO.MAC CAMLOW.MAC CATDEV.MAC CATLOG.MAC
CATPRM.MAC CATTAB.MAC COMERG.MAC COMPAR.MAC
COMPIL.MAC CORFIH.MAC CONV10.MAC CREDIR.MAC
Page 40
CREF.MAC CRSCPY.MAC D60JSY.MAC D60UNV.MAC
DAEMON.MAC DDT.MAC DDT11.MAC DDTFIL.MAC
DDTGP.MAC DDTSIM.MAC DDTSYM.MAC DECLAR.MAC
DELFIL.MAC DIRECT.MAC DSKLST.MAC DSKRAT.MAC
DTELDR.MAC DXLD.MAC DXMCA.ADX DXMCD.ADX
DXMPA.A8 ENDECR.MAC F1EDDT.MAC F1FDDT.MAC
F1UDDT.MAC F1VDDT.MAC FACTOR.MAC FE.MAC
FEDCTL.MAC FEDIT.MAC FEFILE.MAC FILCOM.MAC
FITRAK.MAC FILDAE.MAC GLOB.MAC HELP.MAC
HELPER.MAC INITIA.MAC KDPLDR.MAC KNILDR.MAC
LCPORN.MAC LCPTAB.MAC LNK999.MAC LNKCOR.MAC
LNKCST.MAC LNKD10.MAC LNKERR.MAC LNKEXO.MAC
LNKF10.MAC LNKHSH.MAC LNKHST.MAC LNKINI.MAC
LNKLOD.MAC LNKLOG.MAC LNKLOW.MAC LNKMAP.MAC
LNKNEW.MAC LNKOLD.MAC LNKOV1.MAC LNKOV2.MAC
LNKOVS.MAC LNKPAR.MAC LNKPLT.MAC LNKSCN.MAC
LNKSUB.MAC LNKT10.MAC LNKWLD.MAC LNKXIT.MAC
LOGIN.MAC LOGOUT.MAC MACRO.MAC MACROS.MAC
MACTEN.MAC MAKLIB.MAC MAKVFU.MAC MONSYM.MAC
NCPTAB.MAC NETLDR.MAC NETWOR.MAC NEWACT.MAC
OPSER.MAC OVRLAY.MAC OVRPAR.MAC PIP.MAC
PLTDCL.MAC PLTGLB.MAC PLTIO.MAC PLTMTH.MAC
PLTPRM.MAC PLTUTL.MAC PROJCT.MAC QUOLST.MAC
REACT.MAC RSXCMN.MAC RSXT10.MAC RSXTTL.MAC
RUNOFF.MAC SCAN.MAC SCDEXE.MAC SCDSET.FOR
SCNMAC.MAC SETSRC.MAC SERVIS.MAC SWIL.MAC
SWIERM.MAC SWIFIL.MAC SWIHLP.MAC SWILIO.MAC
SWIMEM.MAC SWIMSC.MAC SWINET.MAC SWIQUE.MAC
SWISCN.MAC SWITOU.MAC SWIWLD.MAC SYSDPU.MAC
SYSDPY.MAC SYSTAT.MAC TECO.MAC TWICE.MAC
UFDSET.MAC USGSUB.MAC WILD.MAC
An indirect command file to perform this operation has been
included in the installation save set on this patch tape. This
file will restore the appropriate files to DSKP:[7,6,CSP]. If you
wish to use this command file, but are not using DSKP:[7,6,CSP] as
your distribution directory you will have to edit this command file
to change the /RESTORE command to correspond to your directory.
An indirect command file which restores all autopatched products
from the CUSP tape has also been provided.
To use this command file, issue the following commands:
.R BACKUP
/TAPE tape:
/@DSKP:CSP703.CCL[7,6]
The following files are required to build the UTILITIES product.
They must be available either in the patching area (PAT:), the
distribution area (DIS:), or in the installation area (INS:).
From the first save-set of the Autopatch tape
Page 41
B361LB.REL OPRPAR.REL
These file will be moved from the Autopatch tape when you use one
of the BACKUP CCL files described in the README file.
When selecting the UTILITIES-10 product for Autopatching you should
include the DIS: for MONITOR as part of your path definition for
DIS: for the UTILITIES-10 product. For example,
DSKP:[7,6,CSP],DSKP:[7,6,MON].
The Patch and Build control file for the re-build of this product
as well as the Autopatch product description file are supplied in
the Installation Save-set on the Autopatch tape. See the last
section of this document for a list of these files. There is a
BACKUP command file provided in the first Save-set which will
restore these files to the proper directory. See the README
documentation file in the first Save-set for more information.
Page 42
4.0 CONTENTS OF INSTALLATION SAVE SET
File Description
---- -----------
PEP.EXE Patch Exec Program
PEPB.EXE Patch Exec for BATCH
PEP.HLP PEP Help file
PEP101.PDF TOPS-10 Product Description Master file
SOUPR.DOC Documentation for the Source Update tool
SOUPR.CTL SOUPR Build Control file
COMPAR.EXE Compare module of SOUPR
COMPAR.HLP COMPAR Help file
COMPR.MAC COMPAR Source file
MERGE.EXE Merge module of SOUPR
MERGE.HLP MERGE Help file
MERGE.MAC MERGE Source file
PARSE.MAC PARSE Source file
PRS.MAC PRS Source file
UPDATE.EXE Update module of SOUPR
UPDATE.HLP UPDATE Help file
UPDATE.MAC UPDATE Source file
INSTAL.DOC Installation Documentation for Autopatch 10/20
AUTINS.DIR Checksummed directory of the Autopatch
Installation Area
*ALGOL-10*
ALG10B.CTL patch and build control file
ALG10B.PDF product description file
ALG10B.CCL command file for preparing distribution area
*ANF10*
ANF703.CTL patch and build control file
ANF703.PDF product description file
ANF703.CCL command file for preparing distribution area
*APL-10*
APL1B2.CTL patch and build control file
APL1B2.PDF product description file
APL1B2.CCL command file for preparing distribution area
*APLSF-10*
APL1S2.CTL patch and build control file
APL1S2.PDF product description file
APL1S2.CCL command file for preparing distribution area
*COBOL-10*
CBL12C.CTL patch and build control file
CBL12C.PDF product description file
CBL12C.CCL command file for preparing distribution area
*COBOL-REP*
CBR12C.CTL patch and build control file
Page 43
CBR12C.PDF product description file
CBR12C.CCL command file for preparing distribution area
*CUSTOMER-SUPPORTED*
CUS703.CTL patch and build control file
CUS703.PDF product description file
CUS703.CCL command file for preparing distribution area
*DBMS-10*
DBMV5A.CTL patch and build control file
DBMV5A.PDF product description file
DBMV5A.CCL command file for preparing DBMS-10 distribution area
DBSINF.REL REL library file
*DECNET-10*
DEC703.CTL patch and build control file
DEC703.PDF product description file
DEC703.CCL command file for preparing distribution area
*FORTRAN-10*
FTN10.CTL patch and build control file
FTN10.PDF product description file
FTN10.CCL command file for preparing distribution area
DBCS1F.CMD command file for building DBMSF
*FORTRAN-REP*
FTN10R.CTL patch and build control file
FTN10R.PDF product description file
FTN10R.CCL command file for preparing distribution area
DBCS1F.CMD command file for building DBMSF
*GALAXY-10*
GAL703.CTL patch and build control file
GAL703.PDF product description file
GAL703.CCL command file for preparing distribution area
*IBMCOM-10-ET*
IETV04.CTL patch and build control file
IETV04.PDF product description file
IETV04.CCL command file for preparing distribution area
MACRO.P11 renmamed copy of MACROS.P11
*IBMCOM-10-HASP*
IHSV01.CTL patch and build control file
IHSV01.PDF product description file
IHSV01.CCL command file for preparing distribution area
MACRO.P11 renmamed copy of MACROS.P11
*MCB-10*
MCB703.CTL patch and build control file
MCB703.PDF product description file
MCB703.CCL command file for preparing distribution area
*MONITOR-10*
Page 44
MON703.CTL patch and build control file
MON703.PDF product description file
MON703.CCL command file for preparing distribution area
*MPE-10*
MPE703.CTL patch control file
MPE703.PDF product description file
MPE703.CCL command file for preparing distribution area
*MS-EXE*
MS1E11.CTL patch control file
MS1E11.PDF product description file
*MS-SOURCES*
MS1S11.CTL patch control file
MS1S11.PDF product description file
MS1S11.CCL command file for preparing distribution area
*SORT-10*
SRTV4D.CTL patch and build control file
SRTV4D.PDF product description file
SRTV4D.CCL command file for preparing distribution area
from SORT distribution
*UTILITIES-10*
UTL703.CTL patch and build control file
UTL703.PDF product description file
UTL703.CCL command file for preparing distribution area