Trailing-Edge
-
PDP-10 Archives
-
tops10_tools_bb-fp64b-sb
-
10,7/tracer/trdump.for
There are 5 other files named trdump.for in the archive. Click here to see a list.
C- COPYRIGHT (C) 1979,1980 BY DIGITAL EQUIPMENT CORPORATION,
C- MAYNARD, MASS.
C-
C-
C- THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
C- ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
C- INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
C- COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
C- OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
C- TRANSFERRED.
C-
C- THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
C- AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
C- CORPORATION.
C-
C- DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
C- SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
IMPLICIT INTEGER(A-Z)
INTEGER RECORD(18),OFILE(6),WHO(0:3),TYPES(0:3,0:6)
INTEGER DATES(2)
C Format of RECORD entries as output by TRACER:
C
C 1 - Sequence number
C 2 - Jiffy daytime of request
C 3 - Name of unit (ASCII, e.g. 'DSKB0')
C 4 - Bit34=Monitor I/O, Bit35=Write
C 5 - # blocks being IOed
C 6 - Block number being IOed
C 7 - UUO executed
C 8 - Spare
C 9 - Kontroller type (as from DSKCHR)
C 10 - Unit type (as from DSKCHR)
C 11 - Value of monitor AC S
C 12 - Supposed to be block number within file
C 13 - Job number of requestor
C 14 - Program name
C 15 - running when data taken
C 16 - Filename and
C 17 - extension
C 18 - PPN
DATA WHO/'UR','UW','MR','MW'/
DATA TYPES/4*'?FD',
1 'RD10','RM10B',2*'NXD',
2 'RP01','RP02','RP03','?NXD',
3 'MD(2)','MD(1)',2*'?NXD',
4 'RS04',3*'?NXD',
5 'RP04','RP06','RM03','RP??',
6 4*'?NXD'/
DATA UMATCH,PMATCH,MINSIZ/3*0/
OPEN(UNIT=47,DIALOG='TRACE:DSKFIL.BIN',
1MODE='IMAGE',ACCESS='SEQIN')
TYPE 5
REWIND 47
5 FORMAT(' Output to (Blanks = TTY:) : ',$)
ACCEPT 6,OFILE
6 FORMAT(6A5)
IF(OFILE(1) .EQ. ' ') OFILE(1) = 'TTY: '
TYPE 104
104 FORMAT(' Sequence limit (0=all entries): ',$)
ACCEPT 112, LIMIT
112 FORMAT(I)
IF(LIMIT .EQ. 0) GO TO 663
TYPE 124
124 FORMAT(' Starting sequence number: ',$)
ACCEPT 112,ISTART
GO TO 666
663 LIMIT = "377777 777777 ! Wants all entries !
666 TYPE 645
645 FORMAT(' Do you wish to select any disk parameters (Y,N): ',$)
ACCEPT 6,YESNO
IF(YESNO .EQ. 'Y' .or. yesno .eq. 'y') GO TO 633
IF(YESNO .EQ. 'N' .or. yesno .eq. 'n') GO TO 686
GO TO 666
633 IF(YESNO .EQ. 'y') TYPE 634
634 FORMAT(' % Please shift to UPPER case'/)
TYPE 101
101 FORMAT(' Give unit name (e.g. DSKB1) for selection. (B'
1,'lanks = all units): ',$)
ACCEPT 6,UMATCH
IF(UMATCH .EQ. ' ') UMATCH = 0
TYPE 103
103 FORMAT(' Program name (5 chars) for selection. (B'
1,'lanks = all programs): ',$)
ACCEPT 6,PMATCH
IF(PMATCH .EQ. ' ') PMATCH = 0
TYPE 474
474 FORMAT(' Minimum transfer size (blocks) to report: ',$)
ACCEPT 112,MINSIZ
686 OPEN(UNIT=3,DIALOG=OFILE,MODE='ASCII',ACCESS='SEQOUT')
CALL DATE(DATES)
CALL TIME(TIMES)
WRITE(3,8) OFILE,DATES,TIMES
8 FORMAT(1X6A5,3X,2A5,3X,A5//
1' Seq ID Daytime Unit Type IOtype Block# UUO of req.'1x
2' Status word'5x'block job:program file'/)
SEQ = 0
9 READ(47,END=99,ERR=88) RECORD
IF(SEQ+1 .EQ. RECORD(1)) GO TO 12
TYPE 11,SEQ
11 FORMAT(' ? Sequencing error after record',I7)
12 SEQ = RECORD(1)
IF(SEQ .LT. ISTART) GO TO 9
UNIT = RECORD(3)
IF(UMATCH .NE. 0 .AND. UNIT .NE. UMATCH) GO TO 9
IF(PMATCH .NE. 0 .AND. RECORD(14) .NE. PMATCH) GO TO 9
IF(RECORD(5) .LT. MINSIZ) GO TO 9
TMHR = RECORD(2) / 216000
ETC = RECORD(2) - 216000 * TMHR
TMMI = ETC / 3600
ETC = ETC - 3600 * TMMI
TMSC = ETC / 60
TMJI = ETC - 60 * TMSC
TYPE = TYPES(RECORD(10),RECORD(9))
WHAT = WHO(RECORD(4))
NUM = RECORD(5)
LBN = RECORD(6)
UUO = RECORD(7)
WRITE(3,14) SEQ,TMHR,TMMI,TMSC,TMJI,UNIT,TYPE,WHAT,NUM,LBN,
1UUO,(RECORD(IZ),IZ=11,18)
14 FORMAT(I7,I3,':',I2,':',I2,'.'I2,1X,A5,1XA5,1XA2,I4,I7,
11XO12,2XO12,I10,4XI3':'A5,A1,2X2A5,'['O12,']')
IF(SEQ .LT. LIMIT) GO TO 9
GO TO 99
88 TYPE 89
89 FORMAT(' ?Input error')
99 CLOSE(UNIT=3) ; CLOSE(UNIT=47)
TYPE 144,SEQ
144 FORMAT(' Done after'I8,' entries')
STOP
END