Google
 

Trailing-Edge - PDP-10 Archives - tops20-v7-ft-dist1-clock - 7-sources/msnet.mac
There are 7 other files named msnet.mac in the archive. Click here to see a list.
;This software is furnished under a license and may only be used
;  or copied in accordance with the terms of such license.
;
;Copyright (C) 1979,1980,1981,1982 by Digital Equipment Corporation
;	       1983,1984,1985,1986    Maynard, Massachusetts, USA


	TITLE MSNET - Netmail sending routines for MS

	SEARCH GLXMAC,MSUNV
	PROLOG (MSNET)

	CPYRYT
	MSINIT

	.DIRECTIVE FLBLST
	SALL

;Define globals

	GLOBS			; Storage
	GLOBRS			; Routines

;Routines defined herein

	INTERNAL SNDNET
TOPS10<	INTERNAL SEND >
TOPS20<	INTERNAL MAIFLG >

;Routines defined elsewhere

;MSDLVR.MAC
	EXTERNAL BLDHDR

;MSHOST.MAC
	EXTERNAL VALID8
;MSTXT.MAC
	EXTERNAL TXTOUT

;MSUTL.MAC
	EXTERNAL MOVST0, MOVSTR

;Global data items defined elsewhere

;MSCNFG.MAC
	EXTERNAL RJ.VMA, RJ.AMA
;MS.MAC
	EXTERNAL MYHSPT, MYHDPT, NETFLG
TOPS20<	EXTERNAL MYSTR>

TOPS10<
repeat 0,<
	EXTERNAL FILBLK,FILERR,IPCBLK,LKEBLK,MYPPN,OBUF,NETMPD,SENBLK
>
	EXTERNAL FILBLK,OBUF
>;End TOPS10
	SUBTTL	TOPS-10 Netmail Support - SNDNET


   TOPS10<

;This routine is called when we have a message ready to be sent and we
;believe that one or more addressees are network addresses.  Our task
;is to handle the network portion of the job.  If the other system is
;a TEN, we may succeed in mailing the message immediately.  Otherwise,
;the message will be queued for the MAIL DAEMON (NETMAI).  Unlike
;The OTHER operating system, once the message is queued, it is gone
;- The TOPS-20 crock of telling DMAILR to hurry up is not present.
;Thus, note that .MAILR is called ONLY by SNDNET; there is no NETMAIL command
;
;U is pointing to either a TO or a CC list.  The end of the list is
;pointed to by W.  We are going to do one giant loop over each
;entry in the list, and send to the maildaemon at the node.  But
;since the maildaemons will accept the message once, and then
;forward to multiple receipients, we only send to each maildaemon once.

;F%NSP=1B16

; Here to stuff the header out
SEND:	ILDB	A,B			; Get the character
	JUMPE	A,[RET]			; Return to caller when done
SEND1:	SOSGE	OBUF+.BFCTR		; Room for this character
	 JRST	SEND2			; Nope, then output buffer and proceed
	IDPB	A,OBUF+.BFPTR		; Place it into buffer
	JRST	SEND			; and get the next one
SEND2:	MOVEI	C,.FOOUT		;
	HRRM	C,FILBLK+.FOFNC		; Setup for output
	MOVE	C,[XWD .FOFNC+1,FILBLK]	;
	FILOP.	C,			; Output buffer
	 HALT	.			; Fix this later
	JRST	SEND1			; Continue on with it

SNDNET:	SETO	C,
	AOS	(P)		;ASSUME SKIP RETURN FOR STARTERS
SNDNE1:	CAILE	U,(W)		;ANYTHING TO (MORE) DO?
	RET			;THIS MIGHT RET +2
	MOVE	B,(U)		;FETCH RECEIPIENT BITS
	TXNE	B,AD%PFX!AD%SFX!AD%PRN!AD%DEL!AD%DON ;REASONS NOT TO DO THIS
	 AOJA	U,SNDNE1	;FINE, SOMEONE ELSE DID IT
	AOSN	C		;FIRST TIME HERE?
	SOS	(P)		;CANCEL THAT SKIP RETURN!
	CITYPE	<%Mail not queued for >
	MOVEI	A,(B)
	HRLI	A,(POINT 7)
	$CALL	KBFTOR
	AOJA	U,SNDNE1	; try next
REPEAT 0,< ;"Speak" to NETMAI
SNDNET:	TRVAR <QJFN,HPTR0,QOFF,QBSZ,QBAD>

;Here must do what is necessary to properly fake GLXLIB mem management

	MOVE A,.JBFF		;Get current (GLXLIB) .JBFF
	MOVEM A,QOFF		;Save for exit time
	MOVEI A,.IOASC		;Use this mode
	MOVX B,SIXBIT .SYS.	;PMR uses SYS, we use UPS
	MOVEI C,A		;Point to block
	DEVSIZ C,		;See shat we need.
	 HALT .			;This snh
	HLRZ S1,C		;Get number of buffers monitor builds
	IMULI S1,(C)		;Compute total words required for same
	$CALL M%GMEM		;Have GLXLIB allocate some for us.
	$RETIF			;Shouldn't happen, but not much we can do.
	MOVEM S1,QBSZ		;Save size of core
	MOVEM S2,QBAD		;and its address

SNDNT0:	MOVE B,(U)		; Get this addressee
	TXNE B,AD%PFX!AD%SFX	; If mailing list ID,
	 JRST SNDNT6		;  This is not an addressee
	CALL GETUNM		; Yes, get code for this entry
	CAME B,[-1]		; Net address?
	JRST SNDNT6		; No, don't send via net then
;We think this is a net address, find the host name string in it

	MOVE B,(U)		; Yes, reform string pointer
	HRLI B,(POINT 7,)
SNDNT1:	ILDB C,B		; Get host name
	JUMPE C,[MOVE B,[POINT 7,MYHNAM,27]
		   JRST SNDNT6]		; Local user
	CAIN C,42		; Quoted string?
	JRST [	ILDB C,B		; Yes, scan to close quote
		JUMPE C,[CMERR (Unterminated quoted string)]
		CAIN C,42		; Close quote?
		JRST .+1		; Yes, go on then
		JRST .]			; No, keep looking
	CAIE C,"@"		; Hostname?
	JRST SNDNT1		; Not yet

SNDNT2:	MOVEM B,HPTR0		; Save pointer to host name
SNDN20:	MOVE A,HPTR0		; Get pointer to host name back
	CALL VALID8		; Validate host name
	 FATAL (Confusion in host name table)
	HRRZ A,(B)		; Get ptr to node block
	HRRZ B,N.FLGS(A)	;Get the flags
	TXOE B,NT%DON		;Done this node already
	 JRST SNDNT6		; Yes, do the next addressee
	HRRM B,N.FLGS(A)	;put the flags back
	TXO F,F%QDEC		;Pretend we queued mail (so NT%DON cleared)
;Here, we have found a new node to send to.  Start serious work

	SETZM LKEBLK		; Start by making sure that
	MOVE B,[XWD LKEBLK,LKEBLK+1] ; any un-initialized locations
	BLT B,LKEBLK+.RBAUT	; are wiped clean
	HRRZ A,N.NAME(A)	; Get the pointer to the name
	MOVE B,(A)		; Get first word of string block
	TLNN B,(177B6)		; Is this a flag word or text?
	TXNN B,CM%FW		;  ..
	SKIPA			; Not flags, must be text
	ADDI A,1		; Flags, skip it
	HRLI A,(POINT 7,)	; Get the byte pointer
	CALL ASCSIX		; Convert to SIXBIT
	MOVEM B,SENBLK		; Name of File (Also known as NODNAM later...)
	MOVEM B,LKEBLK+.RBNAM	; Save the File name
	SETZM LKEBLK+.RBPPN	; Allow PPN to default to that of device
	MOVSI B,(SIXBIT |001|)	; Extension
	MOVEM B,LKEBLK+.RBEXT	; And the extension
	MOVEM B,SENBLK+1	; SAVE THE EXTENSION
	MOVE B,MYPPN		; PPN I am working in
	MOVEM B,LKEBLK+.RBAUT	; Make sure we are the author. (Nesc for [1,2])
	MOVEM B,SENBLK+2	; Send it to the NETMAI spooler too
	MOVX B,INSVL.(077,RB.PRV) ;Get a reasonable protection
	MOVEM B,LKEBLK+.RBPRV	; Make sure file can't be read by random folks
	MOVEI B,.RBAUT		; Number of arguments that mean any thing
	MOVEM B,LKEBLK+.RBCNT	; Count of arguments

	MOVEI A,.IOASC		; Write the file in ASCII mode
	MOVEM A,FILBLK+.FOIOS	; Save the I/O mode
	MOVEI A,LKEBLK		; Get address of LKE block
	MOVEM A,FILBLK+.FOLEB	; Save it
	MOVSI A,-1		; Get the number of output buffers
	MOVEM A,FILBLK+.FONBF	; Save it
	MOVSI A,OBUF		; And the header
	MOVEM A,FILBLK+.FOBRH	; And the buffer header
	TXO F,F%DNNM		; This is DECnet, use right host name
	TXZ F,F%XMTO		; This can't be set, but...
	CALL BLDHDR		; Build a header for this message
	TXZ F,F%DNNM		; Not DECnet any more
;Here, we put it on UPS for NETMAI

SNDNR0:	$TEXT(KBFTOR,<Filing Mail for later transmission>)
	$CALL K%FLSH		;FLUSH IT
	$CALL F%FCHN		; Get a channel from GLXLIB
	$RETIF			; If can't, give up!
	MOVEM S1,QJFN		; Save assigned channel
SNDR1:	MOVEI A,.FOCRE		; We want to create a new file
	HRL A,QJFN		; on our assigned channel
	TXO A,FO.PRV		; Ensure that we bypass protections
	MOVEM A,FILBLK+.FOFNC	; Save it
	MOVX A,<SIXBIT |UPS|>	;PLACE TO PUT IT
	MOVEM A,FILBLK+.FODEV	;DEVICE
	MOVE A,QBAD		;Get address for buffers
	MOVEM A,.JBFF		;Tell monitor where to put em
	SETZM OBUF		; Make sure no stray pointers
	MOVE A,[XWD .FOLEB+1,FILBLK] ; Get the argument pointer
	FILOP. A,		; Create it
	 JRST FILCKE		; Check the error code to see if real

	MOVE B,[POINT 7,HDRPAG] ; OUTPUT THE HEADER PAGE
	PUSHJ P,SNDNR1		;TO THE FILE
	TXO F,F%UUO		;THIS IS A UUO FLAG ALSO
	PUSHJ P,TXTOUT		;OUTPUT TEXT TO FILE ON CHANNEL 6
	TXZ F,F%UUO		;CLEAR THE UUO FLAG
	JRST SNDNR4		; CLOSE AND RELEASE THE CHANNEL NOW

;Helper routine to do string output to MAIL daemon file

SNDNR1:	ILDB A,B		;GET THE CHARACTER
	JUMPE A,[RET]		;RETURN TO CALLER WHEN DONE

SNDNR2:	SOSGE OBUF+.BFCTR	;ROOM FOR THIS CHARACTER
	 JRST SNDNR3		;NOPE, THEN OUTPUT BUFFER AND PROCEED
	IDPB A,OBUF+.BFPTR	;PLACE IT INTO BUFFER
	JRST SNDNR1		;AND GET THE NEXT ONE

SNDNR3:	PUSHJ P,QJFUUO		;Do this UUO
	 OUT 0,
	JRST SNDNR2		;OK
	HALT	.		;GIVE ERROR MESSAGE
;Here Flush last file buffer, and close file

SNDNR4:	PUSHJ P,QJFUUO		;Do this
	 OUT 0,
	  TXZA F,F%UUO		;Success
	TXO F,F%UUO		;Failed
	PUSHJ P,QJFUUO
	 CLOSE 0,
	PUSHJ P,QJFUUO
	 RELEAS 0,
	TXZE F,F%UUO		;Unless i/o error, proceed
	 JRST SNDNT6		;DON'T TELL MAIL SPOOLER ABOUT IT THEN

;Here, we have successfully written the message to a MAILdaemon file.
;Tell the maildaemon it has work to do

	MOVX A,<XWD ^D8,SENBLK> ; GET POINTER TO SEND BLOCK
	MOVEM A,IPCBLK+.IPCFP	;SAVE IT
	SKIPN A,NETMPD		;HAVE A PID FOR HIM
	 JRST [$TEXT (KBFTOR,<No Network Mail Spooler>)
	       JRST SNDNT6]	;AND GO ON TO THE NEXT ONE
	MOVEM A,IPCBLK+.IPCFR	; Recievers PID
	SETZM IPCBLK+.IPCFS	; Clear senders PID
	SETZM IPCBLK+.IPCFL	;CLEAR OUT THE FLAG WORD
	MOVX A,<XWD ^D4,IPCBLK>	;GET THE POINTER TO THE BLOCK
	IPCFS. A,		;SEND IT OFF
	 JFCL

;Here to advance to the next known user, and try to send

SNDNT6:	TXZ F,F%NSP		;CLEAR THE NSP FLAG
	CAIE U,(W)		; Got them all
	 AOJA U,SNDNT0		; Nope

;End of list.  Return to SNDMSG

SNDNTX:	MOVE A,QOFF		; Get the GLXLIB .JBFF
	MOVEM A,.JBFF		; Restore it
	MOVE S1,QBSZ		; Get size of allocated buffer space
	MOVE S2,QBAD		; And where it is
	$CALL M%RMEM		; Give it back to GLXLIB
	SKIPT			; Unless successful
	 HALT .			; We screwed up
	RETSKP
;Here with a FILOP. error queueing for NETMAI.  If serious,
;return, else go try next extension.

FILCKE:	CAIE A,ERAEF%		; Already exist
	 JRST [	CALL FILERR	; Report failed file operation
		SOS (P)		; Prevent skip, so end up at SEND level
		JRST SNDNTX]	; Now release core, and stop trying
	MOVS B,LKEBLK+.RBEXT	; Get the extension
	ADDI B,1		; Increment it
	HRLZS B			; Swap it back
	MOVEM B,SENBLK+1	; Save in message too
	MOVEM B,LKEBLK+.RBEXT	; Save it
	JRST SNDR1		; Recheck this file now

;Helper routine to do various UUOs for QJFN

QJFUUO:	PUSH P,A		;Get an ac
	MOVE A,@-1(P)		;Get UUO caller wants xctd
	PUSH P,A		;Save a copy
	HRLZ A,QJFN		;Get channel number
	LSH A,^D<17-12>		;Shift to AC field
	IORM A,(P)		;Put into our copy of UUO
	MOVE A,-1(P)		;Get A back
	XCT (P)			;Do the UUO
	 CAIA
	AOS -2(P)		;Inc rtn for skip
	POP P,(P)		;Toss UUO
	POP P,(P)		;Toss old A
	RETSKP			;Skip over user copy of UUO

MAIFLG:				;TOPS-10 has no kludgy bits file...
	RETSKP
   >;End TOPS10
>;End "Speak" to NETMAI
 SUBTTL Netmail routines - SNDNET - queue DECNET and/or ARPANET mail

   TOPS20<

;Queue mail for MMAILR (ARPAnet mail)
; Any other mail should have been done before this is called
; This writes one file (or none) per call
; Call with U pointing to beginning of list, and W pointing
; at last element to do.

;Stack space is
; QJFN/ jfn of queued mail file to write, for ARPA mail
; DJFN/ jfn for queued mail for old decnet
; HPTR0/ pointer to nodename in address string (points to "@")
; TEMP0/ quick temporary storage
; REJCNT/ -1 if no mail was rejected
; HOSSTR/ holds last nodename done (also a flag: nonzero if any nodes done)
; JBINF/ storage for job information (to create a semi-unique filename)
; FILSTR/ for created filename for queued mail for ARPA
; DECFIL/ for created filename for old decnet

SNDNET: TRVAR <QJFN,HPTR0,DJFN,REJCNT,TEMP0,<HOSSTR,20>,<JBINF,10>,<FILSTR,20>,<HNTMP,10>,<DECFIL,20>>
	SETOM	REJCNT		;NOTHING REJECTED YET
	SETZM	HOSSTR		;NO LAST NODENAME SEEN YET FOR ARPA
	TXZA	F,F%QARP!F%QDEC	;NO QUEUED MAIL YET; START PROCESSING LIST
SNDENI:	ADDI	U,1
SNDENL:	CAILE	U,(W)		;ANYTHING TO (MORE) DO?
	 JRST	SNDNT5		;NO, LEAVE NOW
	MOVE	B,(U)		;FETCH RECEIPIENT BITS
	TXNE	B,AD%PFX!AD%SFX!AD%PRN!AD%DEL!AD%DON ;REASONS NOT TO DO THIS
	 AOJA	U,SNDENL	;FINE, SOMEONE ELSE DID IT
	HRLI	B,(POINT 7)	;BYTE POINTER TO STRING, PLEASE
	CALL	GETUNM		;GET CODE FOR ENTRY
	AOJN	B,SNDENI	;SKIP ENTRY IF NOT -1 (IE, NOT NET)
	HRRZ	B,(U)		;BUILD BYTE POINTER AGAIN
	HRLI	B,(POINT 7)	;..
	CALL	GETATS		;MAKE A POINTER TO TNE NODENAME
	CAIE	C,"@"		;GET ONE?
	 JRST	NOLCL		; NO, THIS IS LOCAL MAIL
	MOVEM	B,HPTR0
SNDN20:	MOVE	A,HPTR0		; Get pointer to host name back
	CALL	VALID8		; Validate host name
	 FATAL (Confusion in host name table)
	HRRZ	A,(B)		; Get ptr to node block
	MOVE	B,N.FLGS(A)	; Get flags
	TXNE	B,NT%ARP	; ARPANET host?
	JRST	SNDN21		; Yes, do it
	;..
	MOVE	A,NETFLG	; Get the network flags
	TXZE	A,RJ.VMA	; Is the old way allowed?
	JRST	REJECM		; Despised and rejected
;IT HAS A NODENAME, AND IT ISN'T ARPA. IT MUST BE DECNET MAIL THAT MX
; DECIDED NOT TO TAKE. DO IT THE OLD WAY, FOR DMAILR/VMAILR ETC.
	MOVEI A,DECFIL	; POINT TO WHERE FILESPEC IS BUILT
	HRLI A,(POINT 7)	; MUST USE MOVEI SINCE DECFIL IS STACK RELATIVE
	MOVEI B,MYSTR		; Get STR:
	CALL MOVSTR		; Put it in string
	MOVEI B,[ASCIZ "<"]	; Don't forget the delimiter for dir
	CALL MOVSTR		; Insert delimiter
	MOVEI B,MYDIRS		; OURSTR:<ourdir>[--DECNET-MAIL--].nodename
	CALL MOVSTR
	MOVEI B,[ASCIZ />[--DECNET-MAIL--]./]
	CALL MOVSTR		; Finish filename
	MOVEM A,TEMP0		; Save ptr to it again
	MOVE B,HPTR0		; Point to host part of this address
	TXZ F,F%F1		; Translate always
	CALL TRANSH		; Translate to real name if necessary
	MOVEI A,HNTMP		; Safer place for translation to sit
	HRLI A,(POINT 7,)	;  ..
	CALL MOVST0		; Get it out of harm's way
	MOVEI A,HNTMP		; Point to safe copy
	HRLI A,(POINT 7,)	;  ..
	MOVEM A,HPTR0		; Save ptr to real name
	CALL VALID8		; Validate host name
	 FATAL (Confusion in host name table)
	HRRZ A,(B)		; Get ptr to node block
	MOVE B,N.FLGS(A)	; Get flags
	TXNE B,NT%KWL		; HAKMAIL host?
	JRST [	HRRZ A,(U)		; Yes, write entire address into
		HRLI A,(POINT 7,)	;  ..
		MOVEM A,HPTR0		;  extension of queued mail
		JRST SNDN2A]		; And do one file per recipient
	TXOE B,NT%DON		; Done this host yet?
	AOJA U,SNDENL		; Yes, don't do it again
	MOVEM B,N.FLGS(A)	; Remember we've done it
SNDN2A:	TXO F,F%DNNM		; Use DECNET name for this host
	CALL BLDHDR		; Build header text
	MOVE A,TEMP0		; Restore ptr to partial filespec
	MOVE B,HPTR0		; Point to host name
	MOVEI D,"V"-100		; In case anything needs quoting
SNDN4A:	ILDB C,B		; Insert rest of string
	CAIN C,"."
	JRST SNDN4B		; Stop on "."
	JUMPE C,SNDN4B		; Stop on null
	CAIN C,"@"		; This needs quoting
	IDPB D,A		;  ..
	IDPB C,A		; Move the char
	JRST SNDN4A		; Repeat
SNDN4B:	MOVEI B,[ASCIZ /;P770000/]
	CALL MOVST0		; Security please
	MOVSI A,(GJ%NEW!GJ%FOU!GJ%SHT)
	HRROI B,DECFIL
	GTJFN
	 ERJMP [JRETER (Cannot get queue file)
		RET]
	HRLI A,.FBBYV		; Specify 0 retention count
	TXO A,CF%NUD		; Hold update till close
	MOVX B,77B5
	SETZ C,
	CHFDB			; ...
	 JFCL			; Tough darts.
	TLZ A,-1		; JFN only
	MOVE B,[7B5+OF%WR]
	OPENF
	 ERJMP [JRETER (Cannot open queue file)
		RET]
	MOVEM A,DJFN		; Remember the JFN
	HRROI B,HDRPAG		; Start of headers
	SETZ C,
	SOUT
	 ERJMP DERROR		; Error writing queue file
	TXO F,F%JSYS		; Use SOUT, not TSOUT
	CALL TXTOUT		; Move text of message
	TXZ F,F%JSYS		; Don't leave stray bits around
	JUMPF DERROR		; Check for errors
	HRROI B,TRAILR		; Add the dashes
	SOUT			;  ..
	 ERJMP DERROR
	CLOSF			; All there is to it
	 ERJMP DERROR
	TXO F,F%QDEC		; Note existence of queued DECNET mail
	JRST FINNET		;mark as done and loop for next

NOLCL:	WARN	(Local mail seen in SNDNET, ignoring)
	AOJA	U,SNDENL
;STILL IN TOPS20
SNDN21:	MOVE	A,NETFLG	;TEST ARPA-ALLOWED flag
	TXZE	A,RJ.AMA	;OK ARPA MAIL?
	JRST	REJECM		;REJECTION FLAGGED, SO SORRY...

	SKIPE	HOSSTR		;FIRST TIME HERE?
	 JRST	SNDNT3		;NO, ALREADY SET UP THINGS
	MOVEI	A,FILSTR	; POINT TO WHERE FILESPEC IS BUILT
	HRLI	A,(POINT 7)	; MUST USE MOVEI SINCE FILSTR IS STACK RELATIVE
;**;[3093] Replace 5 lines with 3 lines at SNDN21:+8L	MDR	15-JUL-87
	MOVEI	B,[ASCIZ "MAIL:[--QUEUED-MAIL--].NEW-"] ;[3093]
	CALL	MOVSTR		;[3093] ALL THIS TO BUILD
				;[3093] MAIL:[--QUEUED-MAIL--].NEW-unique
	MOVE	B,A		;SAVE POINTER IN B FOR A MOMENT
	GTAD%			;GET DATE AND TIME
	EXCH	B,A		;DATE/TIME INTO B, POINTER INTO A
	CALL	RAD36		;WRITE AS A NUMBER/LETTER STRING
	MOVEM	A,TEMP0		;SAVE POINTER FOR A MOMENT
	SETO	A,
	MOVSI	B,-.JIRT-1	;WE WANT JOB NUMBER THROUGH JOB RUNTIME
	HRRI	B,JBINF
	SETZ	C,		;FROM FIRST ENTRY
	GETJI%
	 JFCL			;NO FAILURE
	MOVE	B,.JIRT+JBINF	;GET RUNTIME
	LSH	B,^D10		;MAKE ROOM FOR A JOB NUMBER
	OR	B,.JIJNO+JBINF	;INCLUDE JOB NUMBER
	MOVE	A,TEMP0		;POINTER BACK INTO A
	CALL	RAD36N		;SEMI-UNIQUE STRING ADDED TO EXTENSION
	MOVEI	B,[ASCIZ "-MS;P770000"] ;ADD THE CORRECT PROTECTION
	CALL	MOVST0		;AND THAT'S IT
;STILL IN TOPS-20
	MOVSI	A,(GJ%NEW!GJ%FOU!GJ%SHT)
	HRROI	B,FILSTR
	GTJFN%
	 ERJMP [JRETER (Cannot get queue file)
		RET]
	HRLI	A,.FBBYV		; Specify 0 retention count
	TXO	A,CF%NUD		; Hold update till close
	MOVX	B,77B5
	SETZ	C,
	CHFDB%			; ...
	 JFCL			; Tough darts.
	HRRZS	A		; JFN ONLY
	MOVEM	A,QJFN		; Remember the JFN
	MOVE	B,[7B5+OF%WR]
	OPENF%
	 ERJMP QERROR
	MOVEI	B,.CHFFD	;WRITE A FORMFEED
	BOUT%
	 ERJMP	QERROR
	HRROI	B,[ASCIZ/=DELIVERY-OPTIONS:MAIL
/]
	SETZ	C,
	SOUT%			;WRITE PROPER HEADER FOR MMAILR
	 ERJMP	QERROR
;STILL IN TOPS-20
SNDNT3:	MOVE	B,HPTR0
	MOVEI	A,HOSSTR
	HRLI	A,(POINT 7)
	STCMP%			;SAME NODE AS LAST TIME??
	JUMPE	A,SNDNT4	;0 IF YES, DON'T NEED TO ADD A NEW NODE LINE
	MOVE	B,HPTR0
	HRROI	A,HOSSTR
	CALL	CSTRBA		;COPY NEW NODENAME INTO PLACE
	MOVEI	B,.CHFFD	;FIRST, A FORMFEED
	MOVE	A,QJFN
	BOUT%
	 ERJMP	QERROR
	MOVE	B,HPTR0		;WRITE NODENAME. C IS 0 FROM CSTRBA.
	SOUT%
	 ERJMP	QERROR		;..
	HRROI	B,CRLF
	SOUT%
	 ERJMP	QERROR
SNDNT4:	SETZ	C,
	DPB	C,HPTR0		;OK, NULL SEPERATION BETWEEN NAME AND HOST
	MOVE	A,QJFN		;SET UP TO WRITE USERNAME
	HRRO	B,(U)		;POINT TO RECEIPIENT YET AGAIN
	SOUT%
	 ERJMP	QERROR		;THIS TIME WRITE HIS NAME TO ENVELOPE
	MOVEI	B,"@"
	DPB	B,HPTR0		;REPAIR THE RECEPIENT STRING
	HRROI	B,CRLF
	SOUT%
	 ERJMP	QERROR		;OK, END USERNAME WITH CRLF
FINNET:	MOVX	A,AD%DON	;MAKE AS DONE FOR EVERYONE ELSE
	IORM	A,(U)		;..
	AOJA	U,SNDENL	;NEXT ENTRY...

;HERE WHEN WE HAVE EXAMINED ALL THE ENTRIES FROM U TO W.
SNDNT5:	SKIPN	HOSSTR		;GET ANYTHING?
	 RETSKP			;NO, GIVE OK RET WITH NOTHING TO DO
	TXZ	F,F%DNNM	;No DECNET NAMES HERE
	CALL	BLDHDR		;BUILD HEADERS
	TXO	F,F%DNNM
	MOVE	A,QJFN
	HRROI	B,[BYTE(7) .CHFFD, .CHCRT, .CHLFD]
	SETZ	C,
	SOUT%
	 ERJMP	QERROR		; END ENVELOPE PORTION
	HRROI	B,HDRPAG	; Start of headers
	SOUT%
	 ERJMP	QERROR		; Error writing queue file
	TXO	F,F%JSYS	; Use SOUT, not TSOUT
	CALL	TXTOUT		; Move text of message
	TXZ	F,F%JSYS	; Don't leave stray bits around
	JUMPF	QERROR		; Check for errors
	HRROI	B,TRAILR	; Add the dashes
	SETZ	C,
	SOUT%			;  ..
	 ERJMP	QERROR
	CLOSF%			; All there is to it
	 ERJMP	QERROR
	TXO	F,F%QARP	; WE HAVE ARPA MAIL
	RETSKP			; GIVE "OK" RETURN

REJECM:	AOSN	REJCNT
	$TEXT	(KBFTOR,<
 [MX  has  rejected some or all of the mail, as it requires access
  to a node that MX does not service, or speaks  a  mail  protocol
  that  MX  does  not  support. MS is NOT posting the mail for any
  other potential mailers that might handle the required  protocol
  -  it  has been prohibited from trying. The unsent mail text can
  be retrieved with RETRIEVE LAST-DRAFT at the MS prompt.]
>)
	XOR	A,NETFLG	;see which we rejected
	TXNE	A,RJ.VMA	; and type approprate message
	CITYPE	<%VMAIL or DMAIL mail not queued for >
	TXNE	A,RJ.AMA
	CITYPE	<%TCP mail not queued for >
	HRRZ	A,(U)
	HRLI	A,(POINT 7)
	$CALL	KBFTOR
	AOJA	U,SNDENL	; try next

;Byte pointer in B. Find the "@" that preceeds a nodename and return
; the pointer to it in B and "@" in C.
; If not found, something other than "@" in C.
;This only handles () and "", not <>
GETATS:	ILDB	C,B		;FIND INTERESTING CHARACTER
	CAIE	C,0
	CAIN	C,"@"		;STOP ON "@" OR NULL
	RET
	CAIN	C,"\"		;MAGIC QUOTE CHARACTER?
	JRST	[ILDB	C,B	;FINE, GET NEXT CHAR
		 JUMPN	C,GETATS;AND IGNORE IF NOT NULL
		 RET]		;NO, DON'T QUOTE NULLS, JUST STOP
	CAIN	C,"("		;COMMENT COMING?
	JRST	[MOVEI	C,")"
		 CALL	SCANC	;FINE, FIND CLOSE
		 JUMPN	A,GETATS
		 RET]		;CAN'T FIND? NOT GOOD..
	CAIE	C,""""		;QUOTED STRING?
	JRST	GETATS
	CALL	SCANC
	JUMPN	A,GETATS
	RET

SCANC:	ILDB	A,B
	CAIE	A,(C)
	CAIN	A,0
	RET
	JRST	SCANC

;Copy string ref'd by B to A. Returns C/ 0.
CSTRBA:	TLCE	A,-1
	TLCN	A,-1
	HRLI	A,(POINT 7)
CSTRB1:	ILDB	C,B
	IDPB	C,A
	JUMPN	C,CSTRB1
	RET

CRLF:	ASCIZ/
/

;Here to write a string comprised of letters and numbers only, representing
;the number given in B. Leading dash is appended if quantity is negative.
; String written to bype pointer in A
RAD36:	JUMPGE	B,RAD36A	;NEGATIVE REQUIRES SPECIAL TREATMENT
	MOVNS	B		;NOW MAKE VALUE POSITIVE (FAILS FOR 1B0)
RAD36N:	TXZ	B,1B0		;FORCE POSITIVE (IN CASE IT WAS 1B0)
	MOVEI	C,"-"		;PUT IN A LEADING "-" SIGN
	IDPB	C,A		;..
RAD36A:	SETO	C,
RAD36P:	PUSH	P,C		;MARK END WITH A -1
	IDIVI	B,^D36		;USUAL NUMBER WRITER LOOP
	CAILE	C,9		;WILL IT WORK AS A DIGIT?
	ADDI	C,"A"-"0"-^D10	;THIS AND NEXT CONVERTS TO A LETTER
	ADDI	C,"0"		;CONVERT TO DIGIT
	JUMPG	B,RAD36P	;IF MORE TO DO, GO DO IT
RAD36L:	IDPB	C,A		;WRITE LAST CHARACTER BUILT ONTO STRING
	POP	P,C		;POP OFF CHARACTER OR END-OF-LIST VALUE
	JUMPG	C,RAD36L	;REAL CHARACTER?
	RET			;NO, LEAVE

;Here on any error writing queue file

DERROR:	SKIPA	A,DJFN
QERROR:	MOVE	A,QJFN
	PUSH	P,A
	CLOSF			; Close it
	 JFCL			; Ignore problems
	POP	P,A
	RLJFN
	 JFCL
	JRETER (Error writing queued mail)
	RET

;Still in TOPS20
 SUBTTL MAIFLG - set flags for network mailers

;Still in TOPS20

; Set the MAILER flags

MAIFLG:	TXNN F,F%QARP		; Any ARPANET mail going out?
	JRST MAIFL1		; No, skip this
	HRROI A,[ASCIZ /SYSTEM:MAILER.FLAGS/]
	CALL MAIFL0		; Yes, light mailer flag
	 RET			; Pass failure on up
	CALL WAKEMM		; Tell MMAILR we have mail to send
	CITYPE	<TCP mail posted>
MAIFL1:	TXNN F,F%QDEC		; Any DECNET mail?
	JRST MAIFL2		; No, type reassurance and quit
	HRROI A,[ASCIZ /SYSTEM:DECNET-MAILER.FLAGS.1/]
	CALL MAIFL0		; Yes, notify mailer
	 RET			; Pass failure return on up
	CITYPE	<DECnet mail posted>
MAIFL2:	RETSKP			; OK

;Still in TOPS20
;Still in TOPS20
IPCBLN==20
WAKEMM:	STKVAR	<OURPID,<IPCBLK,.IPCFP+1>,<IPCBUF,IPCBLN>>
	MOVX	A,IP%CPD
	MOVEM	A,.IPCFL+IPCBLK
	SETZM	.IPCFS+IPCBLK
	SETZM	.IPCFR+IPCBLK
	MOVSI	A,.IPCI2+3
	HRRI	A,IPCBUF
	MOVEM	A,.IPCFP+IPCBLK
	MOVX	A,.IPCIW
	MOVEM	A,.IPCI0+IPCBUF
	SETZM	.IPCI1+IPCBUF
	MOVE	B,[POINT 7,[ASCIZ/[SYSTEM]MMAILR/]]
	HRROI	A,.IPCI2+IPCBUF
	CALL	CSTRBA
	MOVEI	A,.IPCFP+1
	MOVEI	B,IPCBLK
	MSEND%
	 ERJMP	[RET]		;CAN'T DO THIS??
	MOVE	A,.IPCFS+IPCBLK
	MOVEM	A,OURPID
WAKSIR:	SETZM	.IPCFL+IPCBLK
	SETZM	.IPCFS+IPCBLK
	MOVE	A,OURPID
	MOVEM	A,.IPCFR+IPCBLK
	MOVSI	A,IPCBLN
	HRRI	A,IPCBUF
	MOVEM	A,.IPCFP+IPCBLK
	MOVEI	A,.IPCFP+1
	MOVEI	B,IPCBLK
	MRECV%
	 ERJMP	[RET]
	LDB	A,[POINT 3,.IPCFL+IPCBLK,32]
	JUMPE	A,WAKSIR
	MOVE	A,.IPCFL+IPCBLK
;	LOAD	A,IP%CFC,.IPCFL+IPCBLK
;	CAIE	A,.IPCCC
;	CAIN	A,.IPCCF
;	SKIPA	A,.IPCFL+IPCBLK	;OK, GET FLAGS
;	JRST	WAKSIR		;FROM SOMEONE ELSE; IGNORE
	TXNE	A,IP%CFE+IP%CFM
	RET			;OH, WELL
	SETZM	.IPCFL+IPCBLK
	MOVE	A,OURPID
	MOVEM	A,.IPCFS+IPCBLK
	MOVE	A,.IPCI1+IPCBUF	;FETCH MAILR PID
	MOVEM	A,.IPCFR+IPCBLK	;SET UP TO SEND TO IT
	MOVEI	A,IPCBUF
	HRLI	A,1		;SENDING ONE WORD
	MOVEM	A,.IPCFP+IPCBLK
	MOVE	A,['WAKEUP']	;THIS IS THE WORD
	MOVEM	A,0+IPCBUF
	MOVEI	C,^D20
WAKMMR:	MOVEI	A,.IPCFP+1
	MOVEI	B,IPCBLK
	MSEND%
	 ERJMP	[SOJL	C,[RET]
		 MOVEI	A,^D1200
		 DISMS%
		 JRST	WAKMMR]
	MOVX	A,.MUDES
	MOVEM	A,IPCBUF
	MOVE	A,OURPID
	MOVEM	A,1+IPCBUF
	MOVEI	A,2
	MOVEI	B,IPCBUF
	MUTIL%
	 ERJMP	.+1
	RET

;Still in TOPS20
;Still in TOPS20

;Light bit in flags file for mailer
;A/ pointer to name string for file

MAIFL0:	STKVAR <FJFN,FLGPAG,FLGADR> ; Flags file JFN, buffer page, address
	MOVEM A,FJFN		; Save pointer to name string
	$CALL M%NXPG		; Get a page for flags
	JUMPF [	WARN <Can't acquire page to map mailer flags>
		RET]
	MOVEM A,FLGPAG		; Save page number
	LSH A,^D9		; Compute address
	MOVEM A,FLGADR
	MOVE A,FLGPAG		; Get page no. back
	$CALL M%IPRC		; Tell GLXLIB the page exists now
;	TXNE F,F%XMLR		; XMAILR support?
;	JRST [	MOVE A,FJFN		; Yes, get JFN back
;		JRST MAIFL3]		; Skip the GTJFN
	MOVE B,FJFN		; Pointer to name of file
	MOVSI A,(GJ%OLD!GJ%SHT!GJ%PHY)
	GTJFN
	 ERJMP [JRETER (Cannot find mailer flags)
		JRST MAIFLX]
	MOVEM A,FJFN
MAIFL3:	MOVEI B,OF%THW!OF%WR!OF%RD
	OPENF
	 JRST [	JRETER (Cannot open mailer flags)
		MOVE A,FJFN		; Get JFN back
		RLJFN
		 JFCL
		JRST MAIFLX]
	HRLZ A,A		; Page 0
	MOVE B,FLGPAG		; Flags page
	HRLI B,.FHSLF		; This fork
	MOVSI C,(PM%RD!PM%WR)
	PMAP
	HRRZ C,MYDIR		; Logged in directory
	IDIVI C,^D36
	MOVSI A,400000
	MOVN D,D
	ROT A,(D)
	ADD C,FLGADR		; Index into flags page
	IORM A,(C)		; Set my bit
	SETO A,
	SETZ C,
	PMAP			; Unmap the page
	MOVE A,FJFN		; Get JFN back
	TXNE F,F%XMLR		; If XMAILR support,
	TXO A,CO%NRJ		; Keep the JFN
	CLOSF
	 JFCL
MAIFLX:	MOVE A,FLGPAG		; Inform GLXLIB that the page is now
	$CALL M%IPSN		;  available again
	RETSKP

   >;End TOPS20

	END

; Edit 2462 to MSNET.MAC by PRATT on 1-Nov-85
; Merge many changes in -10, -20, and common code.


; *** Edit 2485 to MSNET.MAC by MAYO on 21-Nov-85
;
; *** Edit 2486 to MSNET.MAC by PRATT on 22-Nov-85
; Copyright statements
; *** Edit 2607 to MSNET.MAC by SANTEE on 10-Dec-85
; Make MS/MX get along well together. Have MS write dashes at the end of
; messages. While we're there remove some of the NETMAI code.
; *** Edit 2613 to MSNET.MAC by JROSSELL on 14-Dec-85
; Repair the REPAIR command
; *** Edit 2651 to MSNET.MAC by SANTEE on 2-Feb-86
; Eliminate the need for MSUTAB at all. Move the few useful lines elsewhere. 
; *** Edit 2657 to MSNET.MAC by MAYO on 18-Feb-86
; Teach MS to type recipient names that aren't receiving mail (when rejected by
; MX).
; *** Edit 2705 to MSNET.MAC by PRATT on 27-May-86
; Change mention of ARPA mail to TCP since a site isn't necessarily on Arpanet.
; 
; *** Edit 2706 to MSNET.MAC by RASPUZZI on 27-May-86
; Teach MS not to use POBOX: when writing files. Instead, find out what STR: is
; being used (saved in MYSTR) and go from there. 
; *** Edit 3093 to MSNET.MAC by RASPUZZI on 15-Jul-87
; Make MS queue up ARPAnet mail in MAIL: so that MMAILR can deliver it.