Trailing-Edge
-
PDP-10 Archives
-
tops20-v7-ft-dist1-clock
-
7-sources/tiline.bli
There are 10 other files named tiline.bli in the archive. Click here to see a list.
%TITLE 'TILINE - read a command line'
MODULE TILINE ( ! Read a command line
IDENT = '3-004' ! File: TILINE.BLI Edit: CJG3004
) =
BEGIN
!COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1981, 1988. ALL RIGHTS RESERVED.
!
!THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED ONLY
!IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE INCLUSION OF
!THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER COPIES THEREOF MAY
!NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY OTHER PERSON. NO TITLE
!TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED.
!
!THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE AND
!SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT CORPORATION.
!
!DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
!SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
!
!
!++
! FACILITY: EDT -- The DEC Standard Editor
!
! ABSTRACT:
!
! Read a command line.
!
! ENVIRONMENT: Runs at any access mode - AST reentrant
!
! AUTHOR: Bob Kushlis, CREATION DATE: June 9, 1979
!
! MODIFIED BY:
!
! 1-001 - Original. DJS 18-FEB-1981. This module was created by
! extracting routine EDT$$TI_RDCMDLN from module TINPUT.
! 1-002 - Regularize headers. JBS 11-Mar-1981
! 1-003 - Add return value for end of journal file. JBS 02-Oct-1981
! 1-004 - Add an alternate terminator. STS 21-Oct-1981
! 1-005 - Fix parameter pass to/from char. translator. SMB 27-Oct-1981
! 1-006 - Set a flag if control C actually aborted something. JBS 24-May-1982
! 1-007 - Remove a reference to TI_STARTECHO. SMB 22-Jun-1982
! 1-008 - Allow for 8-bit keyboards. JBS 17-Aug-1982
! 1-009 - Add SS3 for 8-bit terminals. JBS 20-Aug-1982
! 1-010 - Add a special test for "Delete" as a terminator. SMB 23-Aug-1982
! 1-011 - Don't write into a formal parameter. JBS 24-Aug-1982
! 1-012 - Fix a bug in edit 1-011. JBS 25-Aug-1982
! 1-013 - Don't modify EDT$$G_PRV_COL; it is being maintained. JBS 05-Oct-1982
! 1-014 - Add a conditional for VT220 support. JBS 11-Feb-1983
! 3-001 - Fix various string pointers that were not string pointers. GB 23-Mar-1983
! 3-003 - Fix a problem handling excess deletes in a command. CJG 8-Jul-1983
! 3-004 - Remove VT220 conditionals. CJG 25-Nov-1983
!--
%SBTTL 'Declarations'
!
! TABLE OF CONTENTS:
!
REQUIRE 'EDTSRC:TRAROUNAM';
FORWARD ROUTINE
EDT$$TI_RDCMDLN;
!
! INCLUDE FILES:
!
REQUIRE 'EDTSRC:EDTREQ';
!
! MACROS:
!
! NONE
!
! EQUATED SYMBOLS:
!
! NONE
!
! OWN STORAGE:
!
! NONE
!
! EXTERNAL REFERENCES:
!
! In the routine
%SBTTL 'EDT$$TI_RDCMDLN - read a command line'
GLOBAL ROUTINE EDT$$TI_RDCMDLN ( ! read a command line
C, ! First character (already read)
COM_BUF, ! Command buffer
END_COM, ! Receives address of end of line
TERM, ! Character to terminate on
RES_TERM ! resultant terminator
) =
!++
! FUNCTIONAL DESCRIPTION:
!
! Read characters up to a terminator into the command buffer. The
! characters are echoed as they are read. Delete is handled and
! CTRL/U aborts the operation.
!
! FORMAL PARAMETERS:
!
! C The first character to be handled (it was read previously)
!
! COM_BUF Pointer into the command buffer where the characters should
! be placed.
!
! END_COM A character pointer to receive the pointer after the characters
! have been read.
!
! TERM A special terminator. (escape is always a terminator)
!
! RES_TERM The actual terminator.
!
! IMPLICIT INPUTS:
!
! CMD_BUF
! TIN_ECHOPOS
!
! IMPLICIT OUTPUTS:
!
! TIN_ECHOFLG
! CC_DONE
!
! ROUTINE VALUE:
!
! 1 = the string was read,
! 0 = aborted by CTRL/U or CTRL/C
! 2 = end of journal file
!
! SIDE EFFECTS:
!
! NONE
!
!--
BEGIN
EXTERNAL ROUTINE
EDT$$ERA_MSGLN,
EDT$$CHK_CC,
EDT$$TRN_KPADK,
EDT$$TI_INPCH,
EDT$$TI_DELK : NOVALUE,
EDT$$TI_ECHOCH : NOVALUE;
EXTERNAL
CMD_BUF, ! Command line buffer
TIN_ECHOFLG, ! Flag indicating character have been echoed
TIN_ECHOPOS, ! Position on the echo line
CC_DONE; ! Set to 1 if control C actually aborts something
LOCAL
COM_POINT,
KEY,
CH;
COM_POINT = .COM_BUF;
!+
! Use C as the first character.
!-
CH = .C;
!+
! If the terminator can be any character, then return immediately
! upon seeing the delete character.
!-
IF (.TERM EQL ASC_K_DEL) THEN RETURN (1);
WHILE 1 DO
BEGIN
SELECTONE .CH OF
SET
[ASC_K_DEL] :
!+
! Delete character, delete the previous character if there is one.
!-
IF CH$PTR_NEQ (.COM_POINT, .COM_BUF)
THEN
BEGIN
COM_POINT = CH$PLUS (.COM_POINT, -1);
EDT$$TI_DELK (CH$RCHAR (.COM_POINT));
END;
[ASC_K_ESC, ASC_K_CSI, ASC_K_SS3] :
!+
! Escape, CSI or SS3, terminate the read and gobble up the rest of the escape
! or control sequence.
!-
BEGIN
IF (EDT$$TRN_KPADK (KEY) EQL 0) THEN RETURN (2);
.RES_TERM = .KEY;
EXITLOOP;
END;
[.TERM] :
!+
! The special terminator, end the read.
!-
BEGIN
.RES_TERM = .TERM;
EXITLOOP;
END;
[ASC_K_CTRL_U] :
!+
! Abort the read operation, erasing the echo line.
!-
BEGIN
TIN_ECHOFLG = 1;
.END_COM = .COM_BUF;
EDT$$ERA_MSGLN ();
RETURN (0);
END;
[OTHERWISE] :
!+
! Place the character in the buffer.
!-
IF CH$PTR_NEQ (.COM_POINT, CH$PLUS (.COM_BUF, 256))
THEN
BEGIN
CH$WCHAR_A (.CH, COM_POINT);
EDT$$TI_ECHOCH (.CH);
END;
TES;
!+
! Check for a control C as abort the read.
!-
IF EDT$$CHK_CC ()
THEN
BEGIN
.END_COM = .COM_BUF;
CC_DONE = 1;
RETURN (0);
END;
IF (EDT$$TI_INPCH (CH) EQL 0) THEN RETURN (2);
END;
!+
! Return a pointer one character beyond the last one read.
!-
.END_COM = .COM_POINT;
RETURN (1);
END; ! of routine EDT$$TI_RDCMDLN
END
ELUDOM