Trailing-Edge
-
PDP-10 Archives
-
BB-BT99S-BB_1990
-
10,7/mon/oncmod.mac
There are 15 other files named oncmod.mac in the archive. Click here to see a list.
TITLE ONCMOD LEVEL D OPTIONAL & MANDATORY ONCE ONLY CODE V11535
SUBTTL D. MASTROVITO/DPM 31-OCT-89
SEARCH F,S,DEVPRM
IFN FTCIDSK,<
SEARCH KLPPRM,MSCPAR
>; END IFN FTCIDSK
$RELOC
$INIT
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED
; OR COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
;COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION
; 1973,1974,1975,1976,1977,1978,1979,1980,1982,1984,1986,1988.
;ALL RIGHTS RESERVED.
.CPYRT<1973,1988>
;
XP VONCMD,11535
ONCMOD::ENTRY ONCMOD
SALL ;CLEAN LISTINGS
.DIRECT FLBLST ;CLEANER LISTINGS
ND UNTPLN,^D5 ;UNITS/LINE TYPED BY TYPUNS/TYPNMU
SUBTTL ASL PROCESSING -- CHGASL - CHANGE
CHGASL::JRST DEFASL ;SAME AS DEFINE
SUBTTL ASL PROCESSING -- CRESST - CREATE SWAPPING SATS
CRESST: SE1ENT ;ENTER SECTION ONE
IFN FTXMON,<SKIPL UNIPTR(U)> ;ALREADY HAVE?
SKIPGE UNISUN(U) ;IS UNIT IN ASL?
POPJ P, ;NO--DONE
LDB T2,UNYK4S## ;GET # K FOR SWAPPING ON THIS UNIT
JUMPE T2,CPOPJ## ;RETURN IF NO SWAPPING SPACE
LSH T2,K2PLSH ;DOUBLE SIZE IF SWAPPING PAGES
MOVEI T2,^D36(T2) ;INCLUDE EXTRA WORD
IDIVI T2,^D36
MOVN T1,T2 ;MAKE LENGTH -VE FOR AOBJN WORD
HRLM T1,UNIPTR(U) ;STORE IT IN UNIT DATA BLOCK
LSH T2,1 ;DOUBLE ALLOCATION FOR COPY FOR 143 RESTARTS
PUSHJ P,CORGRS ;GET CORE
HRRM T1,UNIPTR(U) ;STORE IT IN UNIT DATA BLOCK FOR AOBJN WORD
IFN FTXMON,<
MOVEI T1,(MS.SAT) ;DATA SECTION 1
DPB T1,UNYSNS## ;STORE THAT FOR SWPSER
> ;END IFN FTXMON
POPJ P, ;RETURN
SUBTTL ASL PROCESSING -- DEFASL - DEFINE
DEFASL::PUSHJ P,SAVE2## ;SAVE P1 AND P2
PUSH P,U ;SAVE U
MOVEI T1,ASLTXT ;PROMPT STRING
MOVE T2,[IFIW ASLVAL] ;ROUTINE TO VALIDATE RESPONSES
MOVE T3,[-SWPMAX##,,SUDTAB] ;AOBJN POINTER TO STORE RESULTS
PUSHJ P,PRSLST## ;PROMPT AND FETCH ANSWERS
MOVE P1,T1 ;GET UPDATED AOBJN POINTER TO TABLE
SETZ P2, ;INIT POSITION COUNTER
MOVEI U,SYSUNI##-UNISYS## ;SET PREDESSOR
DEFAS1: HLRZ U,UNISYS(U) ;LINK TO NEXT UNIT IN SYSTEM
JUMPE U,DEFAS2 ;DONE?
SKIPL UNISUN(U) ;NOT IN THE ASL?
PUSHJ P,SETCHG ;THEN HOME BLOCKS WILL CHANGE
SETOM UNISUN(U) ;REMOVE FROM THE ASL
JRST DEFAS1 ;LOOP FOR ALL STRS
DEFAS2: MOVEI U,SYSUNI##-UNISYS## ;SET PREDESSOR
MOVE T1,(P1) ;GET A UNIT NAME
DEFAS3: HLRZ U,UNISYS##(U) ;LINK TO NEXT UNIT
JUMPE U,DEFAS4 ;SHOULD NEVER BE 0 CUZ UNIT WAS VALIDATED
CAME T1,UDBNAM(U) ;DRIVE NAME?
CAMN T1,UNIHID(U) ;OR LOGICAL UNIT?
CAIA ;YES
JRST DEFAS3 ;TRY ANOTHER UNIT
MOVEM P2,UNISUN(U) ;STORE FAKED UP POSITION IN THE ASL
AOS P2 ;INCREMENT FOR NEXT TIME
PUSHJ P,SETCHG ;MARK HOME BLOCKS TO BE REWRITTEN
DEFAS4: AOBJN P1,DEFAS2 ;LOOP BACK FOR ANOTHER UNIT
POP P,U ;RESTORE U
SETZM PREASL## ;DON'T BELEIVE BOOT VECTOR
PJRST VFCORE ;GO VERIFY INCORE DATA BASE
SUBTTL ASL PROCESSING -- DELSST - DELETE SWAPPING SATS
DELSST: SKIPL UNIPTR(U) ;HAVE SWAPPING SATS?
POPJ P, ;NO
LDB T1,UNYK4S## ;GET # K FOR SWAPPING ON THIS UNIT
JUMPE T1,CPOPJ## ;RETURN IF NO SWAPPING SPACE
SE1ENT ;ENTER SECTION ONE
LSH T1,K2PLSH ;DOUBLE SIZE IF SWAPPING PAGES
MOVEI T1,^D36(T1) ;INCLUDE EXTRA WORD
IDIVI T1,^D36
LSH T1,1 ;DOUBLE ALLOCATION FOR COPY FOR 143 RESTARTS
HRRZ T2,UNIPTR(U) ;GET SECTION-RELATIVE ADDRESS
IFE FTXMON,<PUSHJ P,GIVWDS##> ;RETURN CORE
IFN FTXMON,<
HRLI T2,(MS.SAT) ;INCLUDE SECTION NUMBER
PUSHJ P,GVFWDS## ;RETURN CORE
SETZ T1, ;GET A ZERO
DPB T1,UNYSNS## ;CLEAR OUT SECTION NUMBER
> ;END IFN FTXMON
SETZM UNIPTR(U) ;ZERO POINTER TO SATS
POPJ P, ;RETURN
SUBTTL ASL PROCESSING -- DSKASL - BUILD ASL FROM DISK
DSKASL: PUSHJ P,SAVE4## ;SAVE SOME ACS
PUSH P,U ;SAVE U
MOVSI P1,-SWPMAX## ;AOBJN POINTER TO SWPTAB
MOVEI P2,SWPUNI##-UNISWP ;SET PREDESSOR
SETZB P3,P4 ;START WITH CLASS 0 & ZERO K4S TALLY
DSKAS1: HLRZ U,SYSUNI## ;GET ADDR OF FIRST UDB IN SYSTEM
DSKAS2: SKIPGE UNISUN(U) ;UNIT IN ACTIVE SWAPPING LIST?
JRST DSKAS4 ;CAN'T LINK THIS UNIT
LDB T1,UNYCFS## ;GET SWAPPING CLASS
CAIE T1,(P3) ;MATCH?
JRST DSKAS4 ;NO
SKIPE P3 ;SLOW SWAPPING CLASS?
SKIPE SWPUN2## ;YES--SLOW SWAPPING POINTER SETUP YET?
JRST DSKAS3 ;JUST LINK INTO THE CHAIN
HRLM U,SWPUN2## ;SAVE FIRST SLOW SWAPPING UNIT
HRRM T1,SWPUN2## ;AND THE CLASS NUMBER
DSKAS3: PUSHJ P,CRESST ;CREATE SWAPPING SATS
HRRZM P1,UNISUN(U) ;SET SWAPPING UNIT NUMBER
HRLM U,UNISWP(P2) ;LINK THIS UNIT TO PREVIOUS IN SWAP LIST
MOVE P2,U ;NOW SET PREDECESSOR FOR NEXT UNIT (IF ANY)
MOVEM U,SWPTAB##(P1) ;PUT IN SWAPPER TABLE TOO
LDB T1,UNYK4S## ;GET K FOR SWAPPING ON THIS UNIT
ADD P4,T1 ;ACCUMULATE
MOVE T1,UDBNAM(U) ;DRIVE NAME (INCAES OF HWP)
MOVEI T2,[ASCIZ /swapping unit is hardware write protected/]
MOVSI T3,UNPHWP ;GET HWP BIT
TDNE T3,UNIDES(U) ;CAN WE WRITE ON THIS UNIT?
PUSHJ P,UWARN ;WARN OPERATOR
AOBJP P1,DSKAS5 ;DONE THE MAXIMUM YET?
DSKAS4: HLRZ U,UNISYS(U) ;LINK TO NEXT UNIT
JUMPN U,DSKAS2 ;LOOP FOR MORE
SKIPN P3 ;DONE BOTH CLASSES?
AOJA P3,DSKAS1 ;NOW PROCESS CLASS 1
HLRZ U,SWPUNI## ;GET FIRST SWAPPING UNIT
JUMPN U,DSKAS5 ;ARE THERE ANY UNITS IN ASL?
AOS SERIUS ;CALL THIS A SERIOUS ERROR
MOVEI T1,[ASCIZ /% No units in active swapping list/]
PUSHJ P,CONOUT## ;PRINT MESSAGE
JRST DSKAS6 ;AND CONTINUE
DSKAS5: MOVE T1,MEMSIZ## ;GET WORDS OF CORE
LSH T1,W2KLSH ;CONVERT TO K
CAML P4,T1 ;ENOUGH FOR THE AMOUNT OF CORE WE HAVE?
JRST DSKAS6 ;YES
AOS SERIUS ;CALL THIS A SERIOUS ERROR
MOVEI T1,[ASCIZ /% Insufficient swapping space allocated/]
PUSHJ P,CONOUT## ;PRINT TEXT
MOVEI T1,[ASCIZ / Swapping space = /]
PUSHJ P,ICONM## ;PRINT TEXT
MOVE T1,P4 ;GET TOTAL SWAPPING SPACE ALLOCATED
PUSHJ P,PRTDIG## ;PRINT IT
MOVEI T1,[ASCIZ /K, memory size = /]
PUSHJ P,CONMES## ;PRINT IT
MOVE T1,MEMSIZ## ;GET AMOUNT OF CORE
LSH T1,W2KLSH ;CONVERT TO K
PUSHJ P,PRTDIG## ;PRINT IT
MOVEI T1,[ASCIZ /K/] ;TERMINATOR
PUSHJ P,CONMES## ;PRINT IT
PUSHJ P,CRLFOP## ;END LINE
DSKAS6: HLRZ U,SYSUNI## ;POINT TO FIRST UNIT IN SYSTEM
DSKAS7: SKIPGE UNISUN(U) ;IN THE ASL?
PUSHJ P,DELSST ;NO--DELETE ANY SWAPPING SATS
HLRZ U,UNISYS(U) ;LINK TO NEXT
JUMPN U,DSKAS7 ;LOOP BACK FOR MORE
JRST UPOPJ## ;RESTORE U AND RETURN
SUBTTL ASL PROCESSING -- SHWASL - SHOW
SHWASL::PUSHJ P,SAVE1## ;SAVE P1
PUSH P,U ;SAVE U
MOVEI T1,SWPTXT ;POINT TO HEADER
PUSHJ P,CONOUT## ;PRINT IT
MOVEI U,SYSUNI##-UNISYS ;SET PREDESSOR
SETZ P1, ;CLEAR "*" FLAG
SHWAS1: HLRZ U,UNISYS(U) ;LINK TO NEXT
JUMPE U,SHWAS3 ;DONE?
LDB T1,UNYK4S## ;GET K FOR SWAPPING
JUMPE T1,SHWAS1 ;HAVE SOME?
SHWAS2: PUSHJ P,OTSET## ;SET UP BUFFER
MOVEI T3,11 ;TAB
PUSHJ P,COMTYO## ; OVER
MOVEI T3," " ;LEADING SPACE IF NOT IN LIST
SKIPL UNISUN(U) ;IS IT?
MOVEI T3,"*" ;YES--CHANGE TO A SPACE
SKIPL UNISUN(U) ;CHECK AGAIN
AOS P1 ;FLAG THE ASTERISK
PUSHJ P,COMTYO## ;PRINT THE FLAG
MOVE T2,UDBNAM(U) ;DRIVE NAME
PUSHJ P,PRNAME## ;PRINT IT
MOVEI T3,11 ;TAB
PUSHJ P,COMTYO## ; OVER
MOVE T2,UNIHID(U) ;UNIT ID
PUSHJ P,PRNAME## ;PRINT IT
MOVEI T1,[ASCIZ / /]
PUSHJ P,CONMES## ;SPACE OVER
LDB T1,UNYCFS## ;SWAPPING CLASS
PUSHJ P,PRTDI8## ;PRINT IT
MOVEI T1,[ASCIZ / /]
PUSHJ P,CONMES## ;SPACE OVER
LDB T1,UNYK4S## ;GET K FOR SWAPPING
MOVEI T2,^D9 ;COLUMN COUNT
PUSHJ P,NUMTYP ;PRINT IT
PUSHJ P,CRLFOP## ;END LINE
JRST SHWAS1 ;LOOP BACK FOR MORE
SHWAS3: POP P,U ;RESTORE U
SKIPE .UONCE## ;USER MODE?
JRST SHWAS4 ;SKIP THE MEMSIZ STUFF
MOVEI T1,[ASCIZ / (Memory size = /]
PUSHJ P,ICONM## ;PRINT TEXT
MOVE T1,MEMSIZ## ;GET WORDS OF CORE
LSH T1,W2KLSH ;CONVERT TO K
PUSHJ P,PRTDIG## ;PRINT IT
MOVEI T1,[ASCIZ /K)/] ;TERMINATOR
PUSHJ P,CONMES## ;PRINT IT
PUSHJ P,CRLFOP## ;END LINE
SHWAS4: JUMPE P1,CPOPJ1## ;RETURN IF NO UNITS FLAGGED
MOVEI T1,[ASCIZ /
* indicates unit currently in the ASL/]
PUSHJ P,CONOUT## ;PRINT TEXT + CRLF
JRST CPOPJ1## ;RETURN
SWPTXT: ASCIZ /
Swapping Units:
Unit UnitID Class Space (K)
------ ------ ----- ---------/
SUBTTL ASL PROCESSING -- MISCELLANEOUS
;VALIDATE AN ASL ENTRY
ASLVAL: MOVEI T2,[ASCIZ /does not exist/] ;INCASE OF ERROR
MOVEI T3,SYSUNI##-UNISYS ;SET PREDESSOR
ASLVA1: HLRZ T3,UNISYS(T3) ;LINK TO NEXT UDB
JUMPE T3,UWARN ;END OF CHAIN?
CAME T1,UDBNAM(T3) ;PHYSICAL DRIVE NAME?
CAMN T1,UNIHID(T3) ;LOGICAL UNIT ID?
SKIPA ;YES TO EITHER
JRST ASLVA1 ;TRY ANOTHER
EXCH T3,U ;SWAP ACS
LDB T4,UNYK4S## ;GET K FOR SWAPPING
EXCH T3,U ;RESTORE ACS
JUMPN T4,CPOPJ1## ;RETURN GOODNESS IF OK
MOVEI T2,[ASCIZ /has no swapping space allocated/]
PJRST UWARN ;WARN OPERATOR AND RETURN
ASLTXT: ASCIZ /
Enter names of units to appear in the active swapping list, one
per line. Terminate list with a blank line./
SUBTTL DIALOGUE SUBROUTINES -- GETASL - SINGLE UNIT ASL
GETASL: JUMPE P2,GETAS1 ;UNIT PART OF A STRUCTURE?
HRRZ T1,STRUNM##(P2) ;NUMBER OF UNITS IN STR
SOJG T1,CPOPJ## ;QUESTION ONLY VALID OF A SINGLE PACK STRUCTURE
LDB T1,UNYK4S## ;GET K FOR SWAPPING
JUMPE T1,CPOPJ## ;RETURN IF NONE ALLOCATED
GETAS1: MOVEI T1,[ASCIZ / Make this the only unit in the ASL/]
MOVSI T2,'NO ' ;DEFAULT ANSWER
JUMPE P2,GETAS2 ;UNIT PART OF A STRUCTURE?
MOVE T3,['KLAD '] ;SPECIAL NAME FOR DEC DIAG DISKS
CAMN T3,STRNAM##(P2) ;IS THIS A KLAD PACK?
MOVSI T2,'YES' ;CHANGE THE DEFAULT
GETAS2: PUSHJ P,PRSYNQ## ;PROMPT AND FETCH ANSWER
JUMPE T1,CPOPJ## ;RETURN IF HE SAID "NO"
PUSH P,U ;SAVE U
MOVEI U,SYSUNI##-UNISYS ;SET PREDESSOR
GETAS3: HLRZ U,UNISYS(U) ;LINK TO NEXT UNIT
JUMPE U,GETAS4 ;DONE ALL UNITS?
SKIPL UNISUN(U) ;IN THE ASL ALREADY?
PUSHJ P,SETCHG ;YES--MARK HOME BLOCKS TO BE REWRITTEN
SETOM UNISUN(U) ;EMPTY THE ASL
JRST GETAS3 ;LOOP BACK FOR MORE
GETAS4: POP P,U ;RESTORE U
HRLM U,SWPUNI## ;SET AS FIRST IN THE ASL
HRRZS UNISWP(U) ;MAKE IT THE LAST IN THE CHAIN
SETZM UNISUN(U) ;SET POSITION TO ZERO
MOVSI T1,-SWPMAX## ;AOBJN POINTER
MOVEM U,SWPTAB##(T1) ;STORE IN THE SWAPPER TABLE
AOBJP T1,CPOPJ## ;RETURN IF A SHORT TABLE
SETZM SWPTAB##(T1) ;CLEAR OUT
AOBJN T1,.-1 ; THE REMAINDER
POPJ P, ;AND RETURN
SUBTTL DIALOGUE SUBROUTINES -- GETBAT - READ BAT BLOCKS
GETBAT: PUSHJ P,SAVE4## ;SAVE SOME ACS
PUSH P,T1 ;SAVE MANDATORY REWRITE FLAG
PUSHJ P,GTMNB1 ;GET MONITOR BUFFER
SETZM BATBAD ;CLEAR "BAT" BLOCK BAD FLAG
MOVSI P2,'BAT' ;BLOCK NAME
MOVE P3,[CODBAT##] ;SPECIAL CODE
MOVE P4,[LBOBAT##,,LBOBAT##] ;FIRST,,SECOND BLOCK OFFSETS
ADD P4,UNIHOM(U) ;CONVERT TO BLOCK NUMBERS
PUSHJ P,REDRUN ;GO READ & VERIFY BLOCKS
JRST TPOPJ## ;BOTH BAD, SO MUST REWRITE THEM
SKIPE REDERR ;ANY ERRORS IN EITHER ONE
SETOM BATBAD ;SET BAT BLOCK BAD FLAG
HRRZ T1,BAFFIR##(P1) ;GET START OF BAD REGION PAIRS
CAIL T2,BLKCOD## ;MAKE SURE IT'S WITHIN THE BLOCK
JRST TPOPJ## ;IT ISN'T SO MUST REWRITE THE BLOCKS
MOVE T3,P1 ;COPY BUFFER ADDRESS FOR LDB
LDB P2,BAYNBR## ;GET # BAD REGIONS FOUND BY MAP PROGRAM
ADD P2,BAFCNT##(P1) ;ADD IN # FOUND BY MONITOR
SKIPN BATFLG ;WANT TO SEE THE BAD REGIONS?
JRST TPOPJ1## ;NO
JUMPN P2,GETBA1 ;GO DISPLAY IF SOME ARE MARKED
MOVEI T1,[ASCIZ /[No bad blocks found on unit /]
PUSHJ P,ICONM## ;START TEXT FOR THIS UNIT
MOVE T2,UDBNAM(U) ;GET UNIT NAME
PUSHJ P,PRNAME## ;ADD THAT TO THE TEXT
PUSHJ P,PRRBKC## ;RIGHT BRACKET+CRLF
PUSHJ P,OPOUT## ;SEND IT TO THE TERMINAL
JRST TPOPJ1## ;RETURN WINNINGLY
GETBA1: MOVE T1,UDBNAM(U) ;GET DRIVE NAME
MOVEI T2,[ASCIZ /bad blocks:/]
PUSHJ P,UWARN ;WARN OPERATOR
MOVEI T1,[ASCIZ/ First block No. CPU Cont Unit Error/]
PUSHJ P,CONOUT## ;PRINT TEXT
MOVEI T1,[ASCIZ/ ------------ --- ----- ---- ---- -----/]
PUSHJ P,CONOUT## ;PRINT TEXT
MOVE T3,P1 ;COPY BLOCK ADDRESS FOR LDB
LDB P2,BAYNBR## ;GET # BAD REGIONS FOUND BY MAP PROGRAM
ADD P2,BAFCNT##(P1) ;ADD IN # FOUND BY MONITOR
MOVNS P2 ;NEGATE
HRLZS P2 ;COUNT IN LH
HRR P2,BAFFIR##(P1) ;MAKE AN AOBJN POINTER
ADDI P2,(P1) ;RELOCATE TO WITHIN THE BUFFER
GETBA2: MOVEI T1,[ASCIZ / /] ;SPACE
PUSHJ P,ICONM## ; OVER
MOVE T1,BAFELB##(P2) ;GET START OF REGION
TLZ T1,BATMSK## ;MASK OUT ALL BUT ADDR
MOVEI T2,BAPNTP## ;IF OLD STYLE
TDNN T2,BAFAPN##(P2) ;CHECK IT
HRRZS T1 ;ONLY 18 BITS COUNT
MOVEI T2,^D12 ;COLUMN COUNT
PUSHJ P,NUMTYP ;PRINT STARTING BLOCK NUMBER
MOVEI T1,[ASCIZ / /] ;SPACE
PUSHJ P,CONMES## ; OVER
MOVE T2,P2 ;COPY POINTER
LDB T1,BAYNBB## ;GET BAD BLOCKS-1 IN THIS REGION
AOS T1 ;ADJUST SO NUMBER IS PLEASING TO THE EYE
MOVEI T2,^D3 ;COLUMN COUNT
PUSHJ P,NUMTYP ;PRINT IT
MOVEI T1,[ASCIZ / /] ;SPACE
PUSHJ P,CONMES## ; OVER
MOVE T2,P2 ;COPY POINTER
LDB T1,BAYAPN## ;GET CPU WHICH DETECED THE ERROR
MOVEI T2,^D5 ;COLUMN COUNT
PUSHJ P,NUMTYP ;PRINT IT
MOVEI T1,[ASCIZ / /] ;SPACE
PUSHJ P,CONMES## ; OVER
MOVE T2,P2 ;COPY POINTER
LDB T1,BAYKNM## ;GET KONTROLLER NUMBER
MOVEI T2,^D4 ;COLUMN COUNT
PUSHJ P,NUMTYP ;PRINT IT
MOVEI T1,[ASCIZ / /] ;SPACE
PUSHJ P,CONMES## ; OVER
LDB T1,UNYKTP## ;GET KONTROLLER TYPE
CAIN T1,TYPRA ;CI DISK?
JRST GETBA3 ;THEN UNIT IS MEANINGLESS
MOVE T1,BAFPUB##(P2) ;GET WORD CONTAINING UNIT NUMBER
LSH T1,14 ;LEFT JUSTIFY MASK
JFFO T1,.+1 ;FIND FIRST BIT
MOVEI T1,7 ;HIGHEST LEGAL UNIT IN A BAT BLOCK
SUBI T1,(T2) ;COMPUTE ACTUAL UNIT NUMBER
MOVEI T2,^D4 ;COLUMN COUNT
PUSHJ P,NUMTYP ;PRINT IT
JRST GETBA4 ;SKIP AROUND
GETBA3: MOVEI T1,[ASCIZ / /]
PUSHJ P,CONMES## ;SKIP COLUMN
GETBA4: MOVEI T1,[ASCIZ / /] ;SPACE
PUSHJ P,CONMES## ; OVER
MOVE T2,BAFERR##(P2) ;GET ERROR WORD
MOVEI T1,[ASCIZ /???/]
TLNE T2,BAPOTR## ;OTHER?
MOVEI T1,[ASCIZ /Other/]
TLNE T2,BAPDTR## ;DATA ERROR?
MOVEI T1,[ASCIZ /Data/]
TLNE T2,BAPHDR## ;SEARCH OR HEADER COMPARE?
MOVEI T1,[ASCIZ /Search or header compare/]
PUSHJ P,CONMES## ;PRINT TEXT
GETBA5: PUSHJ P,CRLFOP## ;END LINE
AOS P2 ;ACCOUNT FOR TWO WORD ENTRIES
AOBJN P2,GETBA2 ;LOOP
POP P,T1 ;GET MANDATORY REWRITE FLAG BACK
JUMPN T1,CPOPJ## ;RETURN NOW IF NO OPERATOR OPTION
MOVEI T1,[ASCIZ /Initialize BAT blocks/]
MOVSI T2,'NO ' ;DEFAULT
PUSHJ P,PRSYNQ## ;PROMPT AND FETCH ANSWER
JUMPN T1,CPOPJ## ;IF "YES", THEN TAKE THE APPROPRIATE RETURN
JRST CPOPJ1## ;ELSE DON'T INIT BAT BLOCKS
NUMTYP: PUSHJ P,SAVE1## ;SAVE P1
MOVEI P1,(T2) ;COPY COLUMN COUNT
NUMTY1: IDIVI T1,12 ;DIVIDE BY RADIX
PUSH P,T2 ;SAVE REMAINDER
SOS P1 ;COUNT DIGITS
SKIPE T1 ;DONE?
PUSHJ P,NUMTY1 ;RECURSE
SKIPLE P1 ;NEED TO PAD ANY COLUMNS?
PUSHJ P,PRSPC## ;PRINT A SPACE
SOJG P1,.-1 ;PAD OUT
POP P,T3 ;GET DIGIT BACK
ADDI T3,"0" ;MAKE ASCII
PJRST COMTYO## ;PRINT IT AND RETURN
SUBTTL DIALOGUE SUBROUTINES -- GETBPC - BLOCKS PER CLUSTER
GETBPC: SETZM ONCTCH## ;DEFEAT PRSCON
HLRZ U,STRUNI##(P2) ;POINT TO FIRST UNIT IN STRUCTURE
MOVEI T1,[ASCIZ / *Blocks per cluster/]
LDB T2,UNYKTP## ;GET KONTROLLER TYPE
SKIPN CHGFLG## ;CHANGE?
SKIPA T2,BPCDEF(T2) ;LOAD UP A RESONABLE DEFAULT
LDB T2,UNYBPC## ;USE CURRENT VALUE
MOVEI T3,3 ;LOW RANGE
MOVEI T4,377777 ;HIGH RANGE
PUSHJ P,PRSDEC## ;PROMPT AND FETCH ANSWER
MOVE P1,T1 ;COPY TO UNORTHODOX PLACE
; PJRST BPCSTO ;GO STORE RESULTS
BPCSTO: LDB T1,UNYBPC## ;GET CURRENT VALUE
CAME T1,P1 ;SAME A NEW?
PUSHJ P,REFCHS ;NO--MUST REFRESH
MOVE T1,[DPB P1,UNYBPC##];GET INSTR. TO BE EXECUTED BY STOUNI
PUSHJ P,STOUNI ;STORE VALUE IN EVERY UNIT IN STR
HLRZ U,STRUNI##(P2) ;GET ADR. OF 1ST. UNIT DATA BLOCK IN STR
PUSHJ P,COMLCA ;COMPUTE LAST CLUSTER ADR. ON UNIT
JFFO T2,.+2 ;FIND POSITION OF 1ST. 1 BIT
MOVEI T3,^D35 ;NONE - BUT FIELD MUST BE AT LEAST 1 BIT WIDE
MOVN P1,T3 ;NEGATE FOR ADDI INSTR.
ADDI P1,^D36 ;COMPUTE FIELD WIDTH FOR CLUSTER ADR.
LDB T1,[POINT 6,STYCLP##(P2),11]
CAME T1,P1 ;NEW SAME AS OLD?
PUSHJ P,REFCHS ;NO
DPB P1,[POINT 6,STYCLP##(P2),11] ;PUT IT IN BYTE POINTER
HLRZ U,STRUNI##(P2) ;GET ADR. OF 1ST. UNIT DATA BLOCK IN STR
LDB T3,UNYBPC## ;GET # BLOCKS/CLUSTER
MOVE T1,STRHGH##(P2) ;HIGHEST BLOCK IN STR
ADDI T1,-1(T3)
IDIVI T1,(T3)
HLRZ P1,T1 ;DIVIDE BY 2**18
ADDI P1,1 ;AND ROUND UP
IMUL P1,T3 ;COMPUTE # BLOCKS PER SUPER CLUSTER
HLRZ T1,STRBSC##(P2) ;GET CURRENT # BLOCKS PER SUPER CLUSTER
CAME T1,P1 ;NEW SAME AS OLD?
PUSHJ P,REFCHS ;NO
HRLM P1,STRBSC##(P2) ;STORE IT
MOVE T2,STRBPU##(P2) ;GET # BLOCKS PER UNIT
SUBI T2,1
IDIV T2,P1 ;DIVIDE BY # BLOCKS PER SUPER CLUSTER
ADDI T2,1
MOVE P1,T2 ;GET NEW VALUE INTO A KOSHER AC FOR 'TRFCHG'
HRRZ T1,STRSCU##(P2) ;GET CURRENT # SUPER CLUSTERS PER UNIT
CAME T1,P1 ;NEW SAME AS OLD?
PUSHJ P,REFCHS ;NO
HRRM P1,STRSCU##(P2) ;STORE # SUPER CLUSTERS PER UNIT
POPJ P,
SUBTTL DIALOGUE SUBROUTINES -- GETCFS - CLASS FOR SWAPPING
GETCFS: SETZM ONCTCH## ;DEFEAT PRSCON
LDB T1,UNYK4S## ;GET K FOR SWAPPING
JUMPE T1,CPOPJ## ;RETURN IF NOT A SWAPPING UNIT
MOVEI T1,[ASCIZ / Swapping class/]
SKIPN CHGFLG## ;CHANGE?
TDZA T2,T2 ;DEFAULT TO CLASS ZERO
LDB T2,UNYCFS## ;ELSE USE CURRENT VALUE
MOVEI T3,0 ;LOW RANGE
MOVEI T4,1 ;HIGH RANGE
PUSHJ P,PRSDEC## ;PROMPT AND FETCH ANSWER
LDB T2,UNYCFS## ;GET OLD VALUE
DPB T1,UNYCFS## ;STORE NEW VALUE
CAME T1,T2 ;SAME AS BEFORE?
PUSHJ P,SETCHG ;NO--MUST REWRITE HOME BLOCKS
POPJ P, ;RETURN
SUBTTL DIALOGUE SUBROUTINES -- GETCNP - BITS PER CLUSTER COUNT
GETCNP: SETZM ONCTCH## ;DEFEAT PRSCON
HLRZ U,STRUNI##(P2) ;POINT TO FIRST UNIT IN STRUCTURE
MOVEI T1,[ASCIZ / *Bits per cluster count/]
LDB T2,UNYKTP## ;GET KONTROLLER TYPE
SKIPN CHGFLG## ;CHANGE?
SKIPA T2,CNPDEF(T2) ;LOAD UP A REASONABLE DEFAULT
LDB T2,[POINT 6,STYCNP##(P2),11] ;USE CURRENT VALUE
MOVEI T3,1 ;LOW RANGE
LDB T4,[POINT 6,STYCLP##(P2),11] ;HIGH RANGE
MOVNS T4 ;NEGATE
ADDI T4,^D36 ;ROUND UP
CAILE T4,LIMCNP## ;MAKE SURE DOESNT EXCEED LIMCMP
MOVEI T4,LIMCNP## ;KEEP WITHIN BOUNDS
PUSHJ P,PRSDEC## ;PROMPT AND FETCH ANSWER
MOVE P1,T1 ;COPY TO UNORTHODOX PLACE
; PJRST CNPSTO ;GO STORE RESULTS
CNPSTO: LDB T1,[POINT 6,STYCNP##(P2),11] ;GET OLD VALUE
CAME P1,T1 ;IF CHANGED,
PUSHJ P,REFCHS ;STR AND UNITS NEED REFRESHING
DPB P1,[POINT 6,STYCNP##(P2),11] ;SAVE NEW ONE
LDB T3,[POINT 6,STYCLP##(P2),11]
ADD P1,T3
MOVNS P1
ADDI P1,^D36
LDB T1,[POINT 6,STYCKP##(P2),11]
CAME T1,P1 ;NEW SAME AS OLD?
PUSHJ P,REFCHS ;NO
DPB P1,[POINT 6,STYCKP##(P2),11]
ADD P1,T3
LDB T1,[POINT 6,STYCNP##(P2),5]
CAME T1,P1 ;NEW SAME AS OLD?
PUSHJ P,REFCHS ;NO
DPB P1,[POINT 6,STYCNP##(P2),5]
MOVE P1,T3
LDB T1,[POINT 6,STYCKP##(P2),5]
CAME T1,P1 ;NEW SAME AS OLD?
PUSHJ P,REFCHS ;NO
DPB P1,[POINT 6,STYCKP##(P2),5]
POPJ P,
SUBTTL DIALOGUE SUBROUTINES -- GETDSN - DISK-SET NUMBERS
GETDSN: SETZM ONCTCH## ;DEFEAT PRSCON
HLRZ U,STRUNI##(P2) ;POINT TO FIRST UNIT IN STRUCTURE
MOVEI T1,[ASCIZ / Disk-set (1 - 36,ALL,NONE)/]
SKIPN CHGFLG## ;CHANGE?
TDZA T2,T2 ;DEFAULT TO "ALL"
LDB T2,STYSET## ;USE CURRENT DEFAULT
SETZ T4, ;CLEAR RESULT
CAIN T2,0 ;ZERO?
MOVSI T4,'ALL' ;YES
CAIN T2,^D37 ;NONE?
MOVE T4,['NONE '] ;YES
JUMPN T4,GETDS2 ;SPECIAL NUMBERS?
GETDS1: IDIVI T2,12 ;DIVIDE BY RADIX
ADDI T3,'0' ;CONVERT TO SIXBIT
LSHC T3,-6 ;SAVE RESULTS
JUMPN T2,GETDS1 ;LOOP FOR MORE
GETDS2: MOVE T2,T4 ;COPY RESULT
PUSHJ P,PRSSIX## ;PROMPT AND FETCH ANSWER
MOVE T3,T1 ;MAKE A COPY
CAMN T3,['ALL '] ;ALL?
JRST GETDS4 ;YES
CAMN T3,['NONE '] ;NONE?
JRST GETDS5 ;YES
SETZ T1, ;CLEAR RESULT
GETDS3: LSHC T2,6 ;GET A CHARACTER
ANDI T2,77 ;MASK OUT JUNK
CAIL T2,'0' ;RANGE
CAILE T2,'9' ; CHECK
JRST GETDS7 ;NOT A NUMBER
IMULI T1,12 ;SHIFT
ADDI T1,-'0'(T2) ;ADD IN RESULTS
JUMPN T3,GETDS3 ;LOOP FOR MORE
CAIL T1,0 ;RANGE
CAILE T1,^D36 ; CHECK
JRST GETDS7 ;NO GOOD
JRST GETDS6 ;GO STORE RESULTS
GETDS4: TDZA T1,T1 ;ALL = 0
GETDS5: MOVEI T1,^D37 ;NONE = 37
GETDS6: LDB T2,STYSET## ;GET OLD VALUE
DPB T1,STYSET## ;STORE NEW VALUE
CAME T1,T2 ;SAME AS BEFORE?
PUSHJ P,CHGSTX ;REMEMBER FOR LATER
POPJ P, ;RETURN
GETDS7: MOVEI T1,[ASCIZ /% Bad response, try again/]
PUSHJ P,CONOUT## ;PRINT THE MESSAGE
JRST GETDSN ;LOOP BACK
SUBTTL DIALOGUE SUBROUTINES -- GETGAR - GUARANTEED BLOCKS
GETGAR: POPJ P, ;UNIMPLEMENTED
SETZM ONCTCH## ;DEFEAT PRSCON
HLRZ U,STRUNI##(P2) ;POINT TO FIRST UNIT IN STRUCTURE
MOVEI T1,[ASCIZ / Sum of blocks guaranteed to users/]
LDB T2,UNYKTP## ;GET KONTROLLER TYPE
SKIPN CHGFLG## ;CHANGE?
SKIPA T2,GARDEF(T2) ;LOAD UP A REASONABLE DEFAULT
MOVE T2,STRGAR##(P2) ;GET CURRENT VALUE
MOVEI T3,0 ;LOW RANGE
MOVE T4,STRSIZ##(P2) ;HIGH RANGE
PUSHJ P,PRSDEC## ;PROMPT AND FETCH ANSWER
MOVE T2,STRGAR##(P2) ;GET OLD VALUE
MOVEM T1,STRGAR##(P2) ;STORE NEW VALUE
CAME T1,T2 ;SAME AS BEFORE?
PUSHJ P,CHGSTX ;REMEMBER FOR LATER
POPJ P, ;RETURN
SUBTTL DIALOGUE SUBROUTINES -- GETGRP - BLOCKS TO ALLOCATION ON OUTPUT
GETGRP: SETZM ONCTCH## ;DEFEAT PRSCON
HLRZ U,STRUNI##(P2) ;POINT TO FIRST UNIT IN STRUCTURE
MOVEI T1,[ASCIZ / Consecutive blocks tried for on output/]
LDB T2,UNYKTP## ;GET KONTROLLER TYPE
SKIPN CHGFLG## ;CHANGE?
SKIPA T2,GRPDEF(T2) ;LOAD UP A REASONABLE DEFAULT
HLRZ T2,UNIGRP(U) ;USE CURRENT VALUE
MOVEI T3,0 ;LOW RANGE
MOVEI T4,-1 ;HIGH RANGE
PUSHJ P,PRSDEC## ;PROMPT AND FETCH ANSWER
SETZ T3, ;CLEAR FLAG
GETGR1: HLRZ T2,UNIGRP(U) ;GET OLD VALUE
HRLM T1,UNIGRP(U) ;STORE NEW VALUE
CAME T1,T2 ;SAME AS BEFORE?
AOS T3 ;NO
HLRZ U,UNISTR(U) ;GET NEXT UNIT DATA BLOCK ADR. IN THIS STR
JUMPN U,GETGR1 ;STORE VALUE IN IT
SKIPE T3 ;DID ANYTHING CHANGE?
PUSHJ P,CHGSTX ;YES
POPJ P, ;RETURN
SUBTTL DIALOGUE SUBROUTINES -- GETK4C - K FOR CRASH.SAV
GETK4C: SETZM ONCTCH## ;DEFEAT PRSCON
HLRZ U,STRUNI##(P2) ;POINT TO FIRST UNIT IN STRUCTURE
MOVEI T1,[ASCIZ / *Number of K for CRASH.EXE/]
LDB T2,UNYKTP## ;GET KONTROLLER TYPE
SKIPN CHGFLG## ;CHANGE?
SKIPA T2,K4CDEF(T2) ;LOAD UP A REASONABLE DEFAULT
HRRZ T2,STRK4C##(P2) ;USE CURRENT VALUE
MOVE T3,['KLAD '] ;SPECIAL NAME FOR DEC DIAGNOSTIC PACKS
SKIPN CHGFLG## ;CHANGE?
CAME T3,STRNAM##(P2) ;IS THIS A KLAD PACK?
SKIPA ;LEAVE DEFAULT ALONE
MOVEI T2,10000 ;CHANGE DEFAULT TO THE MAXIMUM IF DEFINE
SKIPGE T2 ;MINUS ONE?
MOVEI T2,M.NKC## ;THEN USE DEFAULT FROM MONGEN
MOVEI T3,0 ;LOW RANGE
MOVEI T4,10000 ;HIGH RANGE
PUSHJ P,PRSDEC## ;PROMPT AND FETCH ANSWER
MOVE P1,T1 ;COPY TO UNORTHODOX PLACE
HRRZ T1,STRK4C##(P2) ;GET CURRENT VALUE
CAME T1,P1 ;NEW SAME AS OLD?
PUSHJ P,REFCHS ;STR NEEDS REFRESHING, REWRITE HOME BLOCKS
HRRM P1,STRK4C##(P2) ;STORE NEW VALUE
POPJ P, ;DONE
SUBTTL DIALOGUE SUBROUTINES -- GETK4S - K FOR SWAPPING
GETK4S: SETZM ONCTCH## ;DEFEAT PRSCON
JUMPN P2,GETK41 ;BRANCH IF UNIT KNOWN TO BE IN STRUCTURE
MOVEI T3,LB2HOM##+4 ;1ST BLOCK AVAILABLE IF NO STRUCTURE
JRST GETK44 ;COMPUTE MAX K FOR SWAPPING
GETK41: MOVEI T1,LB2HOM##+2 ;LAST BLOCK NOT AVAILABLE FOR SWAP THIS UNIT
LDB T2,UNYBPC## ;BLOCKS PER CLUSTER
IDIV T1,T2 ;T1=LAST CLUSTER NOT AVAILABLE
LDB T3,UNYSPU## ;COUNT 1 CLUSTER FOR EACH SAT ON UNIT
ADDI T3,1(T1) ;PLUS CLUSTERS FOR HOME STUFF
LDB T1,UNYLUN## ;LOGICAL UNIT IN STR
JUMPN T1,GETK42 ;JUMP IF NOT 1ST UNIT IN STR
ADDI T3,RB1UN## ;+CLUSTERS FOR RIBS ON 1ST UNIT REFRESHER MAKES
ADDI T3,3 ;ACCOUNT FOR MFD+SYS+SPL
GETK42: HRRZ T1,STRUNM##(P2) ;NUMBER OF UNITS IN STR
LDB T2,UNYLUN## ;LOGICAL UNIT IN STR
CAIE T1,1(T2) ;SKIP IF THIS IS LAST UNIT IN STR
JRST GETK43 ;NO
ADDI T3,RBLUN## ;COUNT RIBS REFRESHER WRITES ON LAST UNIT
HRRZ T1,STRK4C##(P2) ;K FOR CRASH SAV
LSH T1,BLKSPK ;CONVERT TO BLOCKS
ADDI T1,2+4 ;+6 FOR RIBS AND EXE DIRECTORY
LDB T2,UNYBPC## ;BLOCKS PER CLUSTER
ADDI T1,-1(T2)
IDIV T1,T2 ;CLUSTERS FOR CRASH EXE
ADD T3,T1
MOVEI T1,2 ;2 BLOCKS FOR SNAP SYS AND RECOV SYS
LDB T2,UNYBPC##
ADDI T1,-1(T2)
IDIV T1,T2 ;CLUSTERS FOR SNAP SYS
LSH T1,2
ADD T3,T1
GETK43: LDB T2,UNYBPC## ;BLOCKS PER CLUSTER
IMUL T3,T2 ;T3=1ST BLOCK AVAILABLE FOR SWAPPING
GETK44: TRZ T3,3 ;ROUND DOWN (MAYBE WE SHOULD ROUND UP?)
MOVEM T3,TMPSWM ;SAVE MINIMUM BLOCK NUMBER TO SWAP ON
SOJ T3, ;(T3)=LAST BLOCK NOT AVAILABLE FOR SWAP
MOVE T1,UNIBPU(U) ;BLOCKS ON UNIT
SUB T1,T3 ;T1=BLOCKS AVAILABLE FOR SWAPPING
HRRZ T2,UNICPS(U) ;NOW GET CLUSTERS PER SAT
LDB T3,UNYBPC## ;AND GET BLOCKS PER CLUSTER
JUMPE T3,GETK45 ;FORGET IT IF NOT IN A STR
IMULI T3,-2(T2) ;MULTIPLY TO GET BLOCKS PER SAT - 2 CLUSTERS
CAMLE T1,T3 ;WILL 1 SAT BLOCK HOLD MORE THAN THIS STR
MOVE T1,T3 ;NO, CAN'T USE ALL OF STR FOR SWAPPING
GETK45: LSH T1,MBKSPK ;CONVERT TO MAX K FOR SWAPPING
MOVEI T2,1
LSH T2,LIMK4S##-K2PLSH
SUBI T2,1 ;MAX THAT FITS IN FIELD
CAMLE T1,T2
MOVE T1,T2 ;MIN OF FIELD, BLOCKS AVAILABLE
MOVE T4,T1 ;HIGH RANGE
MOVEI T1,[ASCIZ / *K for swapping/]
LDB T2,UNYKTP## ;GET KONTROLLER TYPE
SKIPN CHGFLG## ;CHANGE?
SKIPA T2,K4SDEF(T2) ;LOAD UP A RESONABLE DEFAULT
LDB T2,UNYK4S## ;USE CURRENT VALUE
MOVE T3,['KLAD '] ;SPECIAL NAME FOR DEC DIAGNOSTIC PACKS
SKIPN CHGFLG## ;CHANGE?
CAME T3,STRNAM##(P2) ;IS THIS A KLAD PACK?
SKIPA ;LEAVE DEFAULT ALONE
MOVE T2,[EXP ^D4096*2] ;CHANGE DEFAULT TO REASONABLE NUMBER
MOVEI T3,0 ;LOW RANGE
CAMLE T2,T4 ;IF DEFAULT NOT IN RANGE,
MOVE T2,T4 ;KEEP IT THERE
PUSHJ P,PRSDEC## ;PROMPT AND FETCH ANSWER
LSH T1,BLKSPK ;COMPUTE BLOCKS NEEDED FOR SWAPPING
MOVE T3,UNIBPU(U) ;GET BLOCKS ON UNIT
SUB T3,T1 ;COMPUTE FIRST BLOCK FOR SWAPPING
LSH T3,-1 ;DIVIDE BY 2 SO SWAP AREA CENTERED ON DISK
TRZ T3,3
CAMGE T3,TMPSWM ;ABOVE MINIMUM BLOCK FOR SWAPPING?
MOVE T3,TMPSWM ;NO, USE MINIMUM BLOCK INSTEAD
MOVEM T3,TMPSWB ;SAVE TEMPORARY SWAP BLOCK NUMBER
LSH T1,MBKSPK ;CONVERT BLOCKS FOR SWAPPING BACK INTO K
LDB T2,UNYK4S## ;GET OLD VALUE
CAME T1,T2 ;SAME AS BEFORE?
PUSHJ P,REFCHU ;NO--MUST REWRITE HOME BLOCKS & REFRESH
DPB T1,UNYK4S## ;STORE NEW VALUE
POPJ P, ;RETURN
SUBTTL DIALOGUE SUBROUTINES -- GETOPP - OWNER PPN
GETOPP: SETZM ONCTCH## ;DEFEAT PRSCON
HLRZ U,STRUNI##(P2) ;POINT TO FIRST UNIT IN STRUCTURE
MOVEI T1,[ASCIZ / Owner PPN/]
SKIPE CHGFLG## ;CHANGE?
SKIPN T2,STRPPN##(P2) ;USE CURRENT VALUE IF CHANGE
MOVE T2,['NONE '] ;ASSUME NONE FOR DEFINE
MOVE T3,[-1,,['NONE ']] ;ACCEPT "NONE" IN ANY CASE
PUSHJ P,PRSPPN## ;PROMPT AND FETCH ANSWER
MOVE T2,STRPPN##(P2) ;GET CURRENT VALUE
MOVEM T1,STRPPN##(P2) ;SET/CLEAR PPN
CAME T1,T2 ;ANY CHANGE?
PUSHJ P,CHGSTX ;REMEMBER FOR LATER
POPJ P, ;RETURN
SUBTTL DIALOGUE SUBROUTINES -- GETOVR - OVERDRAW
GETOVR: SETZM ONCTCH## ;DEFEAT PRSCON
HLRZ U,STRUNI##(P2) ;POINT TO FIRST UNIT IN STRUCTURE
MOVEI T1,[ASCIZ / Blocks allowed for overdraw per user/]
LDB T2,UNYKTP## ;GET KONTROLLER TYPE
SKIPN CHGFLG## ;CHANGE?
SKIPA T2,OVRDEF(T2) ;LOAD UP A REASONABLE DEFAULT
MOVM T2,STROVR##(P2) ;USE CURRENT VALUE
MOVEI T3,0 ;LOW RANGE
MOVE T4,STRSIZ##(P2) ;HIGH RANGE
PUSHJ P,PRSDEC## ;PROMPT AND FETCH ANSWER
MOVM T2,STROVR##(P2) ;GET CURRENT VALUE
MOVNM T1,STROVR##(P2) ;STORE NEW VALUE
CAME T1,T2 ;ANY CHANGE?
PUSHJ P,CHGSTX ;REMEMBER FOR LATER
POPJ P, ;RETURN
SUBTTL DIALOGUE SUBROUTINES -- GETPRV - PRIVATE STRUCTURE
GETPRV: HLRZ U,STRUNI##(P2) ;POINT TO FIRST UNIT IN STRUCTURE
MOVEI T1,[ASCIZ / Private structure/]
SKIPN CHGFLG## ;CHANGE?
TDZA T2,T2 ;LOAD UP A REASONABLE DEFAULT
LDB T2,STYPVS## ;USE CURRENT VALUE
MOVE T2,[EXP <'NO '>,<'YES '>](T2) ;SET DEFAULT TEXT
PUSHJ P,PRSYNQ## ;GET YES/NO RESPONSE
LDB T2,STYPVS## ;GET CURRENT SETTING
DPB T1,STYPVS## ;STORE NEW SETTING
CAME T1,T2 ;DID IT CHANGE?
PUSHJ P,CHGSTX ;YES, NOTE THAT
POPJ P, ;RETURN
SUBTTL DIALOGUE SUBROUTINES -- GETSDL - SINGLE STRUCTURE SDL
GETSDL: HLRZ U,STRUNI##(P2) ;POINT TO FIRST UNIT IN STRUCTURE
MOVEI T1,[ASCIZ / Make this the only structure in the SDL/]
MOVSI T2,'NO ' ;DEFAULT ANSWER
MOVE T3,['KLAD '] ;SPECIAL NAME FOR DEC DIAG DISKS
CAMN T3,STRNAM##(P2) ;IS THIS A KLAD PACK?
MOVSI T2,'YES' ;CHANGE THE DEFAULT
PUSHJ P,PRSYNQ## ;PROMPT AND FETCH ANSWER
JUMPE T1,CPOPJ## ;RETURN IF HE SAID "NO"
PUSH P,U ;SAVE U
PUSH P,P2 ;SAVE P2
PUSH P,STRSDL##(P2) ;SAVE CURRENT POSITION
MOVEI P2,SYSSTR##-STRSYS## ;SET PREDESSOR
GETSD1: HLRZ P2,STRSYS##(P2) ;LINK TO NEXT STR
JUMPE P2,GETSD2 ;DONE?
SKIPL STRSDL##(P2) ;IN THE SDL ALREADY?
PUSHJ P,CHGSTX ;YES--MARK HOME BLOCKS TO BE REWRITTEN
SETOM STRSDL##(P2) ;EMPTY THE SDL
JRST GETSD1 ;LOOP BACK FOR MORE
GETSD2: POP P,T1 ;GET OLD POSITION BACK
POP P,P2 ;RESTORE P2
POP P,U ;RESTORE U
SETZM STRSDL##(P2) ;MAKE IT THE FIRST STRUCTURE IN THE SDL
CAME T1,STRSDL##(P2) ;SAME AS BEFORE?
PUSHJ P,CHGSTX ;MARK HOME BLOCKS TO BE REWRITTEN
POPJ P, ;AND RETURN
SUBTTL DIALOGUE SUBROUTINES -- GETSIC - SATS IN CORE
GETSIC: SETZM ONCTCH## ;DEFEAT PRSCON
MOVEI T1,[ASCIZ / SAT blocks in core/]
LDB T2,UNYSPU## ;LOAD UP A REASONABLE DEFAULT
SKIPE CHGFLG## ;CHANGE?
LDB T2,UNYSIC## ;USE CURRENT VALUE
MOVEI T3,1 ;LOW RANGE
LDB T4,UNYSPU## ;HIGH RANGE
CAIE T2,0 ;SKIP IF NO SATS IN CORE
CAMLE T2,T4 ;SKIP IF NOT TOO MANY SATS IN CORE
MOVE T2,T4 ;USE MAX IF NONE OR TOO MANY
PUSHJ P,PRSDEC## ;PROMPT AND FETCH ANSWER
LDB T2,UNYSIC## ;GET OLD VALUE
CAMN T1,T2 ;SAME AS BEFORE?
POPJ P, ;THEN ALL DONE
PUSH P,T1 ;SAVE NEW VALUE
PUSHJ P,DELSAB ;DELETE EXISTING SAB RING AND SPT TABLE
POP P,T1 ;GET NEW VALUE BACK
DPB T1,UNYSIC## ;STORE NEW VALUE
PUSHJ P,CRESAB ;CREATE A NEW SAB RING AND SPT TABLE
PJRST SETCHG ;NEED TO REWRITE HOME BLOCKS
SUBTTL DIALOGUE SUBROUTINES -- GETSNM - GET STRUCTURE NAME/STR DB
GETSNM: MOVEI T1,[ASCIZ /Structure to define/]
SETZ T2, ;NO DEFAULT STRUCTURE NAME
PUSHJ P,PRSSIX## ;GET A SIXBIT QUANTITY
JUMPE T1,CPOPJ## ;GIVE UP IF NO RESPONSE
PUSHJ P,CHKSN0 ;CHECK OUT PROPOSED NAME
JRST GETSNM ;LET OPR TRY AGAIN
PUSH P,T1 ;SAVE STR NAME
PUSHJ P,GETSTR ;CREATE STR DATA BLOCK
JRST GETSNE ;TOO MANY STRUCTURES
POP P,T1 ;GET STRUCTURE NAME BACK
MOVEM T1,STRNAM##(P2) ;SAVE IT
POPJ P, ;RETURN WITH STR DB SETUP
GETSNE: POP P,(P) ;PHASE STACK
MOVEI T2,[ASCIZ /No room for additional structures/]
PUSHJ P,SWARN ;WARN OPERATOR
SETZ T1, ;SAY NO STRUCTURE
POPJ P, ;AND RETURN
CHKSNM: PUSHJ P,SAVE4## ;SAVE SOME ACS
CHKSN0: TRNE T1,7777 ;CHECK THE NAME NOW
JRST CHKSND ;SINCE FNSTR WILL TRIM IT SILENTLY
PUSHJ P,FNSTR ;ALREADY EXIST?
JRST CHKSN1 ;NO
MOVE T1,STRNAM##(P2) ;GET OFFENDING NAME
MOVEI T2,[ASCIZ /already exists/]
PJRST SWARN ;GIVE UP ON HIM
CHKSN1: MOVSI T2,-SDVLEN## ;AOBJN POINTER
CHKSN2: HLLZ T3,SDVTBL##(T2) ;GET AN ERSATZ DEVICE NAME
CAMN T1,T3 ;MATCH?
JRST CHKSNA ;CAN'T HAVE THAT
AOBJN T2,CHKSN2 ;SEARCH TABLE
HRLI P1,PHONLY## ;FLAG FOR UUOCON TO CHECK
MOVEI J,1_CTXLSH##!1 ;FOR JCH 1.1
SKIPE .UONCE## ;UNLESS IN USER MODE,
PUSHJ P,DEVPHU## ;THEN CALL KROCK ROUTINE
PUSHJ P,DEVPHY## ;CONFLICT WITH A DDB NAME?
JRST CPOPJ1## ;SPECIFIED NAME IS OK
CAIN F,DSKDDB## ;GENERIC DISK NAME?
JRST CHKSNC ;YES
JRST CHKSNB ;DDB CONFLICT
CHKSNA: MOVEI T2,[ASCIZ /conflicts with ersatz device name/]
PJRST SWARN
CHKSNB: MOVEI T2,[ASCIZ /conflicts with DDB name/]
PJRST SWARN
CHKSNC: MOVEI T2,[ASCIZ /conflicts with generic disk/]
PJRST SWARN
CHKSND: MOVEI T2,[ASCIZ /has more than four characters in name/]
PJRST SWARN
SUBTTL DIALOGUE SUBROUTINES -- GETSPU - SATS PER UNIT
GETSPU: SETZM ONCTCH## ;DEFEAT PRSCON
MOVE T2,UNIBPU(U) ;NUMBER BLOCKS ON UNIT
LDB T4,UNYBPC## ;AND BLOCKS PER CLUSTER
IDIV T2,T4 ;COMPUTE LAST CLUSTER ADDRESS ON UNIT
MOVE T1,T2 ;COPY RESULTS
IDIVI T2,<MXSADA==^D118>*^D36
AOS T3,T2 ;LOW RANGE
IDIVI T1,^D36 ;COMPUTE GREATEST # SATS POSSIBLE ON THIS UNIT
ADDI T1,1 ;MAX # OF SATS BASED ON USING ONE WORD PER SAT
MOVEI T4,1 ;ASSUME AT LEAST 1 UNIT PER STR
SKIPE P2 ;SKIP IF NO STR AFTER ALL
HRRZ T4,STRUNM##(P2) ;ONE UNIT CHANGE POINTER REQUIRED PER UNIT
SUBI T4,RIBLEN##-3 ;SUBTRACT THESE PLUS (2 RIBS + EOF)
MOVNS T4 ;MAX # OF SATS WHICH CAN FIT IN ONE RIB
CAILE T1,(T4) ;LESS THAN THIS?
MOVE T1,T4 ;NO--PUT IN AS NEW MAX
MOVE T4,T1 ;HIGH RANGE
MOVEI T1,[ASCIZ / *SAT blocks per unit/]
SKIPN CHGFLG## ;CHANGE?
SKIPA T2,T3 ;USE LOW RANGE VALUE AS DEFAULT
LDB T2,UNYSPU## ;GET CURRENT VALUE
CAMLE T3,T2 ;SKIP IF DEFAULT ISN'T TOO LOW
MOVE T2,T3 ;IF TOO LOW, MAKE DEFAULT THE MINIMUM
CAMLE T2,T4 ;SKIP IF DEFAULT ISN'T TOO HIGH
MOVE T2,T4 ;IF TOO HIGH, MAKE DEFAULT THE MAXIMUM
PUSHJ P,PRSDEC## ;PROMPT AND FETCH ANSWER
LDB T2,UNYSPU## ;GET OLD VALUE
CAMN T1,T2 ;SAME AS BEFORE?
POPJ P, ;THEN ALL DONE
PUSH P,T1 ;SAVE NEW VALUE
PUSHJ P,CKUSTR ;JUST TO BE SURE
JRST TPOPJ## ;DON'T WORRY ABOUT IT
PUSHJ P,DELSAB ;DELETE EXISTING SAB RING AND SPT TABLE
POP P,T1 ;GET NEW VALUE BACK
DPB T1,UNYSPU## ;STORE NEW VALUE
PUSHJ P,CRESAB ;CREATE A NEW SAB RING AND SPT TABLE
PJRST REFCHU ;MUST REWRITE HOME BLOCKS & REFRESH
SUBTTL DIALOGUE SUBROUTINES -- GETSSL - SINGLE STRUCTURE SSL
GETSSL: HLRZ U,STRUNI##(P2) ;POINT TO FIRST UNIT IN STRUCTURE
MOVEI T1,[ASCIZ / Make this the only structure in the SSL/]
MOVSI T2,'NO ' ;DEFAULT ANSWER
MOVE T3,['KLAD '] ;SPECIAL NAME FOR DEC DIAG DISKS
CAMN T3,STRNAM##(P2) ;IS THIS A KLAD PACK?
MOVSI T2,'YES' ;CHANGE THE DEFAULT
PUSHJ P,PRSYNQ## ;PROMPT AND FETCH ANSWER
JUMPE T1,CPOPJ## ;RETURN IF HE SAID "NO"
PUSH P,U ;SAVE U
PUSH P,P2 ;SAVE P2
PUSH P,STRSRC##(P2) ;SAVE CURRENT POSITION
MOVEI P2,SYSSTR##-STRSYS## ;SET PREDESSOR
GETSS1: HLRZ P2,STRSYS##(P2) ;LINK TO NEXT STR
JUMPE P2,GETSS2 ;DONE?
SKIPL STRSRC##(P2) ;IN THE SSL ALREADY?
PUSHJ P,CHGSTX ;YES--MARK HOME BLOCKS TO BE REWRITTEN
SETOM STRSRC##(P2) ;EMPTY THE SSL
JRST GETSS1 ;LOOP BACK FOR MORE
GETSS2: POP P,T1 ;GET OLD POSITION BACK
POP P,P2 ;RESTORE P2
POP P,U ;RESTORE U
SETZM STRSRC##(P2) ;MAKE IT THE FIRST STRUCTURE IN THE SSL
CAME T1,STRSRC##(P2) ;SAME AS NEW POSITION?
PUSHJ P,CHGSTX ;MARK HOME BLOCK TO BE REWRITTEN
POPJ P, ;AND RETURN
SUBTTL DIALOGUE SUBROUTINES -- GETSTN - STRUCTURE NAME
GETSTN: SETZM ONCTCH## ;DEFEAT PRSCON
HLRZ U,STRUNI##(P2) ;POINT TO FIRST UNIT IN STRUCTURE
MOVEI T1,[ASCIZ / Structure name/]
MOVE T2,STRNAM##(P2) ;GET OLD NAME FOR DEFAULT
PUSHJ P,PRSSIX## ;PROMPT AND FETCH ANSWER
CAMN T1,STRNAM##(P2) ;SAME AS BEFORE?
POPJ P, ;ALL DONE
PUSHJ P,CHKSNM ;VALIDATE PROPOSED NEW NAME
JRST GETSTN ;NO GOOD, TRY AGAIN
MOVEM T1,STRNAM##(P2) ;UPDATE POSSIBLY NEW NAME
MOVE T1,[PUSHJ P,GETSTX] ;SET UP CALL TO STOUNI
PJRST STOUNI ;LOOP THROUGH ALL UNITS IN STRUCTURE
;HELPER ROUTINE EXECUTED FROM STOUNI TO MARK HOME BLOCKS NEED TO BE
;REWRITTEN AND TO UPDATE UNILOG FOR ALL UNITS IN THE STRUCTURE.
GETSTX: LDB T1,UNYLUN## ;GET LOGICAL UNIT NUMBER OF THIS UNIT
PUSHJ P,CMPLOG ;COMPUTE AND STORE UNILOG
PJRST SETCHG ;MARK THIS UNIT NEEDS HOME BLOCKS REWRITTEN
SUBTTL DIALOGUE SUBROUTINES -- GETSWB - FIRST SWAPPING BLOCK NUMBER
GETSWB: SETZM ONCTCH## ;DEFEAT PRSCON
LDB T1,UNYK4S## ;GET K FOR SWAPPING
JUMPE T1,CPOPJ## ;RETURN IF NOT A SWAPPING UNIT
LDB T4,UNYK4S## ;GET # K FOR SWAPPING
LSH T4,BLKSPK ;COMPUTE # BLOCKS FOR SWAPPING ON UNIT
MOVE T2,UNIBPU(U) ;GET # BLOCKS ON UNIT
SUB T2,T4 ;COMPUTE HIGHEST 1ST. LOG. BLOCK # POSSIBLE
HRRZ T1,UNICPS(U) ;GET CLUSTERS/SAT
LDB T3,UNYSPU## ;GET SATS/UNIT
SUBI T3,1 ;MINUS 1
IMUL T1,T3 ;COMPUTE CLUSTERS IN ALL BUT LAST SAT
LDB T3,UNYBPC## ;GET BLOCKS/CLUSTER
IMUL T1,T3 ;COMPUTE BLOCKS IN ALL BUT LAST SAT
ADD T1,T4 ;ADD IN BLOCKS FOR SWAPPING ON UNIT
CAMLE T1,UNIBPU(U) ;GREATER THAN UNIT SIZE?
SUB T2,T3 ;YES, RESERVE A CLUSTER IN LAST SAT FOR THE SAT
TRZ T2,3
PUSH P,T2 ;SAVE HIGHEST LEGAL BLOCK
MOVE T1,UNISLB(U) ;GET FIRST BLOCK FOR SWAPPING
CAILE T1,LB2HOM##+1 ;IS IT BETWEEN 0 & SECOND BAT BLOCK?
JRST GETSW1 ;NO
MOVE T1,TMPSWB ;GET COMPUTED VALUE
MOVE T2,UNISLB(U) ;AND PREVIOUS
CAME T1,T2 ;SEE IF THE SAME AS BEFORE
PUSHJ P,REFCHU ;NO, SO MUST REFRESH
MOVEM T1,UNISLB(U) ;SAVE NEW VALUE
GETSW1: MOVEI T1,[ASCIZ / *First logical block for swapping/]
MOVE T2,UNISLB(U) ;GET COMPUTED (OR CURRENT) VALUE
MOVE T3,TMPSWM ;LOW RANGE
POP P,T4 ;HIGH RANGE
CAMG T2,T4 ;IF OUT OF RANGE,
CAMGE T2,T3 ;IN EITHER DIRECTION,
MOVE T2,TMPSWB ;TRY COMPUTED (NOT PREVIOUS)
CAMG T2,T4 ;IF STILL OUT OF RANGE,
CAMGE T2,T3 ;IN EITHER DIRECTION,
MOVE T2,T3 ;GO WITH THE LOWEST
PUSHJ P,PRSDEC## ;PROMPT AND FETCH ANSWER
TRZ T1,3
MOVE T2,UNISLB(U) ;GET OLD VALUE
CAME T1,T2 ;SAME AS BEFORE?
PUSHJ P,REFCHU ;NO--MUST REWRITE HOME BLOCKS & REFRESH
MOVEM T1,UNISLB(U) ;STORE NEW VALUE
POPJ P, ;RETURN
SUBTTL DIALOGUE SUBROUTINES -- GETUID - UNIT ID
GETUID: SETZM ONCTCH## ;DEFEAT PRSCON
MOVEI T1,[ASCIZ / Unit ID/]
SKIPN CHGFLG## ;CHANGE?
SKIPA T2,UNILOG(U) ;DEFAULT UID IS SAME AS LOGICAL UNIT NAME
MOVE T2,UNIHID(U) ;USE CURRENT VALUE
PUSHJ P,PRSSIX## ;GET A SIXBIT QUANTITY
JUMPN T1,GETUI1 ;CONTINUE IF HAVE SOMETHING
MOVE T1,UDBNAM(U) ;DRIVE NAME
MOVEI T2,[ASCIZ /requires a name/]
PUSHJ P,UWARN ;WARN OPERATOR
JRST GETUID ;TRY AGAIN
GETUI1: CAMN T1,UNIHID(U) ;ARE WE LEAVING THIS UNCHANGED?
POPJ P, ;YES--GET OUT WHILE WE STILL CAN
HLRZ T2,SYSUNI## ;GET FIRST UDB IN SYSTEM
GETUI2: CAMN T1,UNIHID(U) ;THIS ONE ALREADY IN USE?
JRST GETUI3 ;CAN'T HAVE THAT
HLRZ T2,UNISYS(T2) ;LINK TO NEXT UDB
JUMPN T2,GETUI2 ;KEEP SEARCHING
JRST GETUI4 ;NOT A DUPLICATE
GETUI3: MOVEI T3,[ASCIZ /Unit id /]
MOVEI T2,[ASCIZ /already exists/]
PUSHJ P,XWARN ;WARN OPERATOR
JRST GETUID ;TRY AGAIN
GETUI4: MOVEM T1,UNIHID(U) ;STORE NEW VALUE
PJRST SETCHG ;MUST REWRITE HOME BLOCKS
SUBTTL DIALOGUE SUBROUTINES -- TABLES OF STRUCTURE & UNIT DEFAULTS
; MACROS TO BUILD DEFAULT TABLES FOR STRUCTURE AND UNIT DATA BLOCKS.
; EACH TABLE IS INDEXED BY CONTROLLER TYPE, TAKEN FROM UNYKTP. THE
; CONTROLLER TYPE CODES ARE:
; 0=DR, 1=FH, 2=DP, 3=MF, 4=FS, 5=RP, 6=RN, 7=RA
;
; CONTROLLER CODES FOR "DR" (FUTURE DRUM ON AN ???? CONTROLLER) AND
; "MF" (MASS FILE UNIT ON AN MD10 "MOBY DISK" CONTROLLER) WERE NEVER
; SUPPORTED BY TOPS10, BUT TABLE ENTRIES EXIST BECAUSE THOSE CODES HAD
; BEEN RESERVED IN ANTICIPATION OF FUTURE HARDWARE.
;
; ARGUMENTS TO THE SUDEFS MACRO ARE:
; KON = CONTROLLER NAME
; BSA = NUMBER OF BLOCKS FOR SEQUENTIAL OUTPUT
; BPC = BLOCKS PER CLUSTER
; GAR = NUMBER OF BLOCKS GUARANTEED
; OVR = NUMBER OF BLOCKS OVERDRAW
; K4C = K FOR CRASH.SAV
; BCC = BITS PER CLUSTER COUNT
; K4S = K FOR SWAPPING
; MUS = MAXIMUM NUMBER OF UNITS PER STRUCTURE
; NSB = NUMBER OF STRUCTURES TO BUILD
; SSN = STARTING STRUCTURE NAME
DEFINE SUDEFS,<
RADIX 10
; (KON,BSA,BPC,GAR,OVR, K4C ,BCC, K4S ,MUS,NSB,SSN )
X (DR , 0, 0, 0, 0, 0, 12, 0, 0, 0, )
X (FH , 10, 1, 0,200, 0, 12, 0, 0, 0, )
X (DP , 30, 5, 0,500, -1, 12, 0, 32, 1,DSKE)
X (MF , 30, 10, 0,500, 256, 12, 0, 0, 0, )
X (FS , 10, 1, 0,100, 0, 12, 200, 32, 1,DSKA)
X (RP , 30, 10, 0,500, -1, 12, 1000, 16, 3,DSKB)
X (RN , 30, 50, 0,500, 0, 12, 0, 16, 3,DSKF)
X (RA , 30, 10, 0,500, 0, 12, 0, 8, 3,DSKI)
RADIX 8
>
; CONTROLLER NAME
DEFINE X (KON,BSA,BPC,GAR,OVR, K4C ,BCC, K4S ,MUS,NSB,SSN ),<SIXBIT /KON/>
KONTBL: SUDEFS
EXP 0 ;TERMINATE TABLE
; BLOCKS TO TRY FOR ON SEQUENTIAL ALLOCATION
DEFINE X (KON,BSA,BPC,GAR,OVR, K4C ,BCC, K4S ,MUS,NSB,SSN ),<EXP BSA>
GRPDEF: SUDEFS
; BLOCKS PER CLUSTER
DEFINE X (KON,BSA,BPC,GAR,OVR, K4C ,BCC, K4S ,MUS,NSB,SSN ),<EXP BPC>
BPCDEF: SUDEFS
; BLOCKS GUARANTEED TO ALL USERS
DEFINE X (KON,BSA,BPC,GAR,OVR, K4C ,BCC, K4S ,MUS,NSB,SSN ),<EXP GAR>
GARDEF: SUDEFS
; OVERDRAW
DEFINE X (KON,BSA,BPC,GAR,OVR, K4C ,BCC, K4S ,MUS,NSB,SSN ),<EXP OVR>
OVRDEF: SUDEFS
; K FOR CRASH.SAV
DEFINE X (KON,BSA,BPC,GAR,OVR, K4C ,BCC, K4S ,MUS,NSB,SSN ),<EXP K4C>
K4CDEF: SUDEFS
; BITS FOR CLUSTER COUNT FIELD
DEFINE X (KON,BSA,BPC,GAR,OVR, K4C ,BCC, K4S ,MUS,NSB,SSN ),<EXP BCC>
CNPDEF: SUDEFS
; K FOR SWAPPING
DEFINE X (KON,BSA,BPC,GAR,OVR, K4C ,BCC, K4S ,MUS,NSB,SSN ),<EXP K4S>
K4SDEF: SUDEFS
; MAXIMUM NUMBER OF UNITS PER STRUCTURE
DEFINE X (KON,BSA,BPC,GAR,OVR, K4C ,BCC, K4S ,MUS,NSB,SSN ),<EXP MUS>
MUSDEF: SUDEFS
; STARTING STRUCTURE NAME
DEFINE X (KON,BSA,BPC,GAR,OVR, K4C ,BCC, K4S ,MUS,NSB,SSN ),<EXP <SIXBIT /SSN/>>
SSNDEF: SUDEFS
SUBTTL DIALOGUE SUBROUTINES -- XWARN - GENERATE WARNING MESSAGES
;ROUTINE TO PRINT A WARNING MESSAGE ON THE CTY
;CALL: MOVE T1, SIXBIT NAME
; MOVE T2, TEXT STRING ADDRESS
; PUSHJ P,KWARN ;FOR KONTROLLERS
; PUSHJ P,SWARN ;FOR STRUCTURES
; PUSHJ P,UWARN ;FOR UNITS
; <RETURN>
KWARN: MOVEI T3,[ASCIZ /Controller /]
JRST XWARN ;ENTER COMMON CODE
SWARN:: MOVEI T3,[ASCIZ /Structure /]
JRST XWARN ;ENTER COMMON CODE
UWARN: MOVEI T3,[ASCIZ /Unit /]
; JRST XWARN ;ENTER COMMON CODE
XWARN: PUSH P,T2 ;SAVE TEXT
PUSH P,T1 ;SAVE DEVICE
PUSH P,T3 ;SAVE PREFIX
MOVEI T1,[ASCIZ /% /] ;START OF MESSAGE
PUSHJ P,ICONM## ;PRINT IT
POP P,T1 ;GET PREFIX BACK
PUSHJ P,CONMES## ;PRINT IT
POP P,T2 ;GET DEVICE BACK
PUSHJ P,PRNAME## ;PRINT IT
PUSHJ P,PRSPC## ;SEPARATOR
POP P,T1 ;GET TEXT BACK
PUSHJ P,CONMES## ;PRINT IT
PJRST CRLFOP## ;APPEND A CRLF AND OUTPUT
SUBTTL DISK READING -- RDDISK - MAIN LOOP
;THIS ROUTINE IS THE FIRST OF THE THREE MAJOR SECTIONS OF THE OPTIONAL
;DISK DIALOGUE. ITS PURPOSE IS TO READ THE DISKS AND BUILD THE IN-CORE
;DATA BASE OF STRUCTURES, UNITS, AND SYSTEM LISTS.
;CALL: PUSHJ P,RDDISK
; <NON-SKIP> ;SOME ERRORS DETECTED
; <SKIP> ;DATA BASE BUILT CORRECTLY
;
;ON THE ERROR RETURN, WARNINGS HAVE BEE ISSUED TO THE OPERATOR FOR ALL
;INCONSISTANCIES DETECTED DURING THIS PROCESS. AT THIS POINT, THE CALLER
;SHOULD DO WHATEVER CLEANUP IS NECESSARY AND RETURN TO THE "STARTUP OPTION"
;PROMPT. THIS WILL ALLOW THE OPERATOR TO CORRECT THE ERRORS IN QUESTION.
RDDISK::PUSHJ P,RDINIT ;RESET FLAGS, RETURN OLD CORE, ETC.
MOVEI T1,[ASCIZ \
[Reading HOM blocks]\]
SKIPE .UONCE## ;IF AN IMPATIENT USER,
PUSHJ P,CONOUT## ;LET HIM KNOW WE'RE ALIVE
HLRZ U,SYSUNI## ;GET ADDR OF FIRST UNIT IN SYSTEM
SETZM ERRHOM ;NO ERRORS READING THS DISK YET
RDDIS1: AOS T1,SYSGEN## ;GET A UNIQUE UNIT GENERATION NUMBER
HRRM T1,UNIGEN(U) ;SET INITIAL VALUE
MOVE J,UDBKDB(U) ;GET ADDR OF KDB FOR UNIT
PUSHJ P,TRYKON ;SEE IF KONTROLLER IS ALIVE
JRST RDDIS7 ;DOWN SO FLAG UNIT AS OFFLINE
PUSHJ P,TRYUNI ;CHECK OUT UNIT
JRST RDDIS7 ;OFFLINE OR UNUSABLE FOR SOME REASON
JRST RDDIS9 ;SKIP THE REST FOR SECONDARY PORTS
;CHECK HOME BLOCKS
RDDIS2: MOVEI T1,UNVPIM ;IF WE READ HOME BLOCKS
DPB T1,UNYUST## ;A PACK MUST BE MOUNTED
PUSHJ P,TRYHOM ;TRY READING THE HOME BLOCKS
JRST RDDIS7 ;CALL IT OFFLINE FOR SOME REASON
;CHECK BAT BLOCKS
RDDIS3: JRST RDDIS8 ;CONTINUE SCAN OF NEXT UNIT
;HERE TO FLAG UNIT AS OFFLINE AND NO PACK MOUNTED
RDDIS7: MOVEI T1,UNVNPM ;SET STATUS TO NO PACK MOUNTED
DPB T1,UNYUST## ;STORE UNIT STATUS
MOVSI T1,UNPOFL ;BIT TO TEST
IORM T1,UNIDES(U) ;MARK UNIT OFFLINE
SETZB T1,UNILOG(U) ;MAKE SURE NOT IN STR FLAG CLEARED
DPB T1,UNYSIC## ;MAKE SURE NO SATS IN CORE
MOVEI T1,O2COD ;IF DEVICE DOES POSITIONS,
SKIPL KONPOS(J) ; WE'LL GET AN INTERRUPT WHEN IT COMES UP,
MOVEM T1,UNISTS(U) ; SO MARK IT DOWN FOR NOW
SETOM UNISUN(U) ;CAN'T BE PART OF THE ASL IF OFFLINE
SETZM UNISTR(U) ;IN CASE IT WAS UP, <ALT> TYPE
RDDIS8: HLRZ U,UNISYS(U) ;GET NEXT UNIT DATA BLOCK
RDDIS9: JUMPN U,RDDIS1 ;LOOP AROUND AGAIN IF ANY LEFT
PUSHJ P,TRYQST ;FIND QUEUE STRUCTURE
SKIPN ERRHOM ;ANY ERRORS?
AOS (P) ;SKIP TO INDICATE SUCCESSFUL
POPJ P, ;RETURN
SUBTTL DISK READING -- GTHOM - READ THE HOME BLOCKS
;ROUTINE TO READ THE HOME BLOCKS INTO CORE FOR A GIVEN UNIT
;CALL: MOVE U, UDB ADDRESS
; PUSHJ P,GTHOM
; <NON-SKIP> ;ERRORS READING HOME BLOCK
; <SKIP> ;HOME BLOCKS READ INTO CORE
GTHOM:: MOVSI P2,'HOM' ;BLOCK NAME
MOVE P3,[CODHOM##] ;CODE WORD FOR "HOME" BLOCKS
MOVE P4,UNIHOM(U) ;GET HOME BLOCK NUMBERS
PUSHJ P,REDRUN ;READ THE HOME BLOCKS
JRST GTHOM1 ;BOTH BAD
MOVE T1,HOMOKC##(P1) ;GET K FOR CRASH.SAV
SKIPN HOMVSY##(P1) ;OLD DISK?
MOVEM T1,HOMK4C##(P1) ;YES--PUT IN NEW PLACE
JRST CPOPJ1## ;RETURN
GTHOM1: SETZM UNILOG(U) ;IN CASE SECOND TIME THROUGH
IFN FTDUAL,<
SKIPE T1,UNI2ND(U) ;ALTERNATE PORT?
SETZM UNILOG(T1) ;ZAP IT TOO
> ;END IFN FTDUAL
POPJ P, ;RETURN INDICATING HOME BLOCKS ARE BAD
SUBTTL DISK READING -- RDINIT - INITIALIZE DISK READING
;ROUTINE TO ALL FLAGS, RETURN CORE, AND DO GENERAL CLEANUP BEFORE
;READING DATA OFF THE DISKS.
;CALL: PUSHJ P,RDINIT
; <RETURN>
RDINIT: HLRZ T1,SYSUNI## ;SEE IF WE FOUND ANY DISK UNITS
SKIPN T1 ;IF NOT,
STOPCD .,STOP,NODISK, ;++ NO DISK UNITS CONFIGURED
SETOM BLURBF ;NO DIALOGUE BLURB SEEN YET
SETOM PRESSL## ;INIT PRESERVED SSL FLAG
SETOM PREASL## ;INIT PRESERVED ASL FLAG
SETOM PRESDL## ;INIT PRESERVED SDL FLAG
SETZM SYSGEN## ;START UNIGEN'S AFRESH
SETZM SYSSTR## ;INITIALLY NO FILE STRUCTURES IN SYSTEM
MOVE T1,STRAOB## ;AOBJN POINTER TO STR DATA BLOCKS
SETZM TABSTR##(T1) ;CLEAR TABLE ENTRY
AOBJN T1,.-1 ;ZERO ALL ENTRIES
HRRZS SWPUNI## ;INITIALLY NO UNITS IN ASL
SETZM SWPUN2## ;SO NO SLOW CLASS SWAPPING SPACE YET
MOVSI T1,MSWPMX## ;AOBJN POINTER TO SWAPPING UNITS
SETZM SWPTAB##(T1) ;CLEAR TABLE ENTRY
AOBJN T1,.-1 ;ZERO ALL ENTRIES
MOVEI R,.USMBF ;ASSUME ONCE
SKIPE .UONCE## ;CHECK FLAG
MOVEI R,TWCMBF## ;TWICE
MOVEM R,ONCMBF ;ADDRESS OF MONITOR BUFFER TO BE USED
SKIPE .UONCE## ;USER MODE (TWICE)?
JRST RDINI1 ;YES
PUSHJ P,RTNCOR ;RETURN SPACE USED FOR SDBS, SATS, AND SPTS
CONO PI,PI.ON ;TURN PI SYSTEM ON FOR WAITS
RDINI1: PUSH P,F ;SAVE F
PUSHJ P,GTODDB ;GET ONCE-ONLY DDB ADDRESS
MOVE T1,F ;COPY IT
POP P,F ;RESTORE F
HRRZS SWPDDB##+DEVSER ;CLEAR LINK SO ONCE WONT LOOP
PUSHJ P,SETDDO## ;CREATE A DDB FOR ONCE ONLY I/O
STOPCD .,STOP,NMC, ;++NO MORE CORE
PUSHJ P,GTMNB1 ;GET MONITOR BUFFER FOR READING HOME BLOCKS
POPJ P, ;RETURN
SUBTTL DISK READING -- REDRUN - READ & CHECK SPECIAL BLOCKS
;THIS ROUTINE WILL READ AND CHECK SPECIAL (HOME, BAT, & RIB) DISK BLOCKS.
;CALL: PUSHJ P,REDRUN
; <NON-SKIP> ;ERRORS ON BOTH BLOCKS
; <SKIP> ;AT LEAST ONE BLOCK OK
REDRUN::PUSHJ P,GTODDB ;GET ONCE-ONLY DDB ADDRESS
HRRZ P1,@ONCMBF ;GET ADR. OF MONITOR BUFFER FOR DISK BLOCK
SKIPN P1 ;SKIP IF WE GOT ONE
STOPCD CPOPJ##,DEBUG,ONCMBM, ;++MONITOR BUFFER MISSING
ADDI P1,1
SETZM REDERR ;CLEAR ERROR FLAG
REDRU1: SETOM WHICH ;INDICATE READING 1ST. BLOCK
HLRZ T2,P4 ;GET ITS BLOCK #
PUSHJ P,REDCHK ;READ BLOCK & CHECK FOR ERRORS
JRST REDRU2 ;ERROR(S) DETECTED - GO TRY 2ND. BLOCK
JUMPG T2,CPOPJ1## ;IF 2ND. BLOCK BAD BUT 1ST. OK - SKIP RETURN
REDRU2: SETZM WHICH ;INDICATE READING 2ND. BLOCK
HRRZ T2,P4 ;GET ITS BLOCK #
PUSHJ P,REDCHK ;READ BLOCK & CHECK FOR ERRORS
JUMPL T2,CPOPJ## ;ERROR ON 1ST. BLOCK GIVES ERROR RETURN
JUMPG T2,REDRU1 ;IF 2ND. BAD BUT 1ST. OK, GO TRY 1ST. AGAIN
JRST CPOPJ1## ;GIVE SKIP RETURN
;SUBROUTINE TO READ A SPECIAL BLOCK AND CHECK FOR ERRORS
; ENTER WITH T2 = BLOCK # TO BE READ. F = FILE DATA BLOCK. U = UNIT DATA BLOCK ADR.
; RETURN T2 & S = 0 IF NO ERRORS. NON SKIP RETURN IF ERROR ON EITHER BLOCK
; RETURN RH T2 =-1 IF ERROR ON 2ND. BLOCK
; " LH T2 =-1 " " " 1ST. "
; & S HAS APPROPRIATE RH ERROR BITS SET
REDCHK: PUSHJ P,OMNRED ;READ THE BLOCK
SKIPA T2,P2 ;ERROR--GET BLOCK NAME
JRST CONCHK ;NO READ ERRORS - GO MAKE CONSISTANCY CHECKS
MOVEI T1,[ASCIZ . block hardware read error.]
PUSHJ P,RDNMSG ;PRINT ERROR MSG. FOR BLOCK TYPE
TRO S,IODTER ;NOTE DATA ERROR
JRST TSTCHK ;DON'T PRINT CONSISTENCY ERROR MESSAGE
CONCHK: TRNN P1,777776 ;SKIP IF WE GOT A BUFFER
XCT ONCMBM ;COMPLAIN IF MONITOR BUFFER NOT ALLOCATED
CAMN P2,[SIXBIT /SAT/] ;IS THIS THE SAT.SYS "RIB" BLOCK WE'RE READING?
CAME P2,RIBNAM##(P1) ;YES - IS THE NAME IN THE "RIB" = 'SAT'?
CAMN P2,BLKNAM##(P1) ;NO - CHECK BLOCK NAME(THIS ALWAYS FAILS WITH "RIB")
CAME P3,BLKCOD##(P1) ;OK - CHECK CODE WORD
SKIPA T2,P2 ;NO CHECK--GET BLOCK NAME
JRST TSTCHK ;EXIT CHECKING ERRORS ON THE WAY
MOVEI T1,[ASCIZ . block consistency error.]
PUSHJ P,RDNMSG ;PRINT ERROR MSG. FOR BLOCK TYPE
TRO S,IOIMPM ;SET AN ERROR BIT FOR ERROR CHECK
TSTCHK: MOVE T2,REDERR ;PICK UP ERROR WORD FOR CHECKING BY CALLER
JUMPE S,CPOPJ1## ;SKIP RETURN IF NO ERRORS
POPJ P,
;SUBROUTINE TO PRINT ERROR MESSAGE FOR REDCHK
;CALL: MOVE T1, SIXBIT BLOCK NAME
; MOVE T2, TEXT STRING ADDRESS
; PUSHJ P,RDNMSG
; <RETURN>
RDNMSG: PUSH P,T1 ;SAVE BLOCK NAME
PUSH P,T2 ;SAVE TEXT ADDRESS
MOVEI T1,[ASCIZ /% /] ;START OF MESSAGE
PUSHJ P,ICONM## ;PRINT IT
MOVE T2,UDBNAM(U) ;GET UNIT NAME
PUSHJ P,PRNAME## ;PRINT IT
PUSHJ P,PRSPC## ;SEPARATOR
MOVEI T1,[ASCIZ /first /] ;ASSUME ERROR ON FIRST BLOCK
SKIPE WHICH ;SECOND BLOCK?
JRST RDNMS1 ;NO
HLLOS REDERR ;INDICATE ERROR ON SECOND BLOCK
SKIPA T1,[[ASCIZ /second /]]
RDNMS1: HRROS REDERR ;INDICATE ERROR ON FIRST BLOCK
PUSHJ P,CONMES## ;PRINT TEXT
POP P,T2 ;GET BLOCK NAME
CAMN T2,['SAT '] ;IF THIS WAS A "RIB" BLOCK
MOVSI T2,'RIB' ; TYPE "RIB" INSTEAD OF "SAT"
PUSHJ P,PRNAME## ;PRINT NAME
POP P,T1 ;GET TEXT BACK
PUSHJ P,CONMES## ;PRINT IT
PJRST CRLFOP## ;APPEND A CRLF AND OUTPUT
WHICH: 0 ;FLAG TO INDICATE FIRST OR SECOND BLOCK READ
REDERR: 0 ;ERROR WORD FOR REDRUN
; RH=-1 IF ERROR ON SECOND BLOCK
; LH " " " " FIRST "
SUBTTL DISK READING -- TRYHOM - CHECK HOME BLOCKS
;ROUTINE TO READ AND VERIFY THE HOME BLOCKS, AND SET UP THE
;IN-CORE DATA BASE
;CALL: PUSHJ P,TRYHOM
; <NON-SKIP> ;OFFLINE OR UNUSABLE
; <SKIP> ;HOME BLOCKS OK
TRYHOM: PUSHJ P,GTHOM ;GET "HOME" BLOCK INTO CORE
CAIA ;ERRORS ON BOTH HOME BLOCKS - T2 NON-ZERO
JRST TRYHO1 ;AT LEAST ONE HOME BLOCK OK
SETZM HOMSIC##(P1) ;0 SATS IN CORE (FLAG FOR BAD HOME BLOCKS)
MOVEI T1,UNVNPM ;SET STATUS TO NO PACK MOUNTED
DPB T1,UNYUST## ;STORE UNIT STATUS
JRST CPOPJ1## ;UNIT OK FOR I/O
TRYHO1: PUSH P,T2 ;SAVE FLAG
PUSHJ P,CHKVSY ;DO WE UNDERSTAND THIS PACK?
JRST TRYHO2 ;YES
PUSH P,T1 ;SAVE PACK TYPE
MOVE T1,UDBNAM(U) ;GET UNIT NAME
MOVEI T2,[ASCIZ /foreign pack mounted (considered offline)/]
PUSHJ P,UWARN ;PRINT MESSAGE
MOVEI T1,[ASCIZ / Type = /]
PUSHJ P,ICONM## ;PRINT TEXT
POP P,T1 ;GET PACK TYPE BACK
PUSHJ P,CONMES## ;PRINT IT
PUSHJ P,CRLFOP## ;END LINE
JRST TPOPJ## ;PHASE STACK AND INDICATE OFFLINE
TRYHO2: POP P,T2 ;RESTORE HOME BLOCK FLAG
SKIPE T2 ;EITHER HOME BLOCK BAD?
PUSHJ P,SETCHG ;YES, MARK TO REWRITE THEM
LDB T2,UNYKTP## ;GET KONTROLLER TYPE
CAIE T2,TYPDP ;SKIP IF RP10
JRST TRYHO3 ;NOT RP10 PROCEED
LDB T1,UNYUTP## ;GET UNIT TYPE TO MAKE SURE PACK IS
CAIN T1,2 ; COMPATIBLE, SKIP IF RP03
CAMN T1,HOMUTP##(P1) ;SINCE RP03 DRIVE CAN READ RP02 PACKS
JRST TRYHO3 ;PACK WRITTEN BY RP03, PROCEED
MOVE T1,UDBNAM(U) ;GET UNIT NAME
MOVEI T2,[ASCIZ /is an RP03 drive but pack written on an RP02/]
PUSHJ P,UWARN ;PRINT MESSAGE
POPJ P, ;INDICATE OFFLINE
TRYHO3: PUSHJ P,MOVUNI ;MOVE PARAMS FROM HOM BLOCK TO UNIT DATA BLOCK
MOVEI P2,0 ;SET STR DB ADR. = 0 IN CASE NO STR FOUND
SKIPN DSKSET## ;DO WE NOTICE DISK SETS?
JRST TRYHO4 ;NO, BYPASS CHECKS ON SET NUMBER
LDB T1,HOYSET## ;GET SET NUMBER THIS STRUCTURE BELONGS TO
JUMPE T1,TRYHO4 ;SPECIAL CASE OF THE "ALL" SET
MOVE T2,BITTBL##-1(T1) ;GET THE APPROPRIATE BIT
CAIG T1,^D36 ;IN THE "NO" SET?
TDNN T2,DSKSET## ;WANT TO MOUNT THIS STRUCTURE AT ONCE TIME?
SKIPA ;NO, THEN DON'T SET UP SDB
JRST TRYHO4 ;PROCEED
MOVE T1,HOMSNM##(P1) ;GET STR NAME FROM HOME BLOCK
CAMN T1,DDTDSK## ;IF WE WANT THIS DISK FOR DEBUGGING,
JUMPN T1,TRYHO4 ;IGNORE ITS DISK SET
MOVSI T1,UNPNMU ;GET THE TEMPORARY BIT
IORM T1,UNIDES(U) ;SET IN THE UNIT DATA BLOCK
JRST TRYHO7 ;INDICATE NO STRUCTURE MOUNTED
TRYHO4: MOVE T1,HOMSNM##(P1) ;GET STR NAME FROM HOME BLOCK
JUMPE T1,TRYHO5 ;DON'T LOOK FOR OR CREATE A ZERO STR NAME
PUSHJ P,FNSTR ;FIND STR(IF IT EXISTS)
CAIA ;NOT FOUND--MUST CREATE A NEW STR DB
JRST TRYHO5 ;FOUND
PUSHJ P,GETSTR ;CREATE STR DATA BLOCK IN UPPER CORE
JRST TRYHO6 ;ATTEMPT TO CREATE MORE STR'S THAN ALLOWED
PUSHJ P,MOVSTR ;MOVE PARAMS FROM HOM BLOCK TO STR DATA BLOCK
TRYHO5: MOVE P4,UNIBPU(U) ;UNIT SIZE
CAMLE P4,STRBPU##(P2) ;BIGGEST UNIT IN STR?
MOVEM P4,STRBPU##(P2) ;YES, SAVE NEW SIZE
PUSHJ P,LNKSTR ;LINK ALL UNITS IN THIS STR
PUSHJ P,CRESAB ;CREATE SAB RING AND SPT TABLE
PUSHJ P,VALMFD ;VALIDATE THE MFD
JRST CPOPJ1## ;RETURN
TRYHO6: SETOM ERRHOM ;INDICATE ERROR READING HOM BLOCKS
TRYHO7: SETOM UNISUN(U) ;INDICATE UNIT NOT IN ASL
SETZM UNILOG(U) ;INDICATE UNIT NOT IN AN STR
JRST CPOPJ1## ;RETURN
SUBTTL DISK READING -- TRYKON - CHECK KONTROLLER STATUS
;ROUTINE TO SEE IF KONTROLLER IS OFFLINE, ETC.
;CALL: PUSHJ P,TRYKON
; <NON-SKIP> ;OFFLINE OR UNUSABLE
; <SKIP> ;ONLINE AND READY FOR I/O
TRYKON: MOVSI T1,KOPDWN ;BIT TO TEST
TDNE T1,KONDWN(J) ;ALREADY MARKED AS DOWN?
POPJ P, ;YES
MOVE J,UDBKDB(U) ;RESET J
XCTCPU (UNI,CHKKON) ;GET KONTROLLER ON/OFF-LINE STATUS
JRST TRYKO1 ;DOWN
JUMPN T1,CPOPJ1## ;KONTROLLER IS OK
JRST TRYKO2 ;IT'S SET WRONG
TRYKO1: MOVE T1,KDBNAM(J) ;GET KONTROLLER NAME
MOVEI T2,[ASCIZ /is offline/]
PUSHJ P,KWARN ;PRINT WARNING
MOVSI T1,KOPDWN ;KONTROLLER DOWN BIT
IORM T1,KONDWN(J) ;FLAG KONTROLLER AS DOWN
POPJ P, ;RETURN INDICATING DOWN KONTROLLER
TRYKO2: MOVSI T1,KOPWHL ;BIT TO TEST
TDNE T1,KONUPA(J) ;ALREADY CHECKED WRITE-HEADER-LOCKOUT?
JRST CPOPJ1## ;YES--NO MORE CHATTER
MOVE T1,KDBNAM(J) ;GET KONTROLLER NAME
MOVEI T2,[ASCIZ /write-header-lockout switch allows writing headers/]
PUSHJ P,KWARN ;PRINT WARNING
JRST CPOPJ1## ;AND RETURN
SUBTTL DISK READING -- TRYQST - CHECK QUEUE STRUCTURE
TRYQST: SKIPN T1,QUESTR## ;GET PRESET STR NAME
JRST TRYQS1 ;NONE SELECTED
MOVE T2,STRAOB## ;SEE IF IT EXISTS
CAME T1,@TABSTR##(T2) ;STRNAM IS FIRST WORD
AOBJN T2,.-1 ;LOOK AT ALL STRS
JUMPL T2,CPOPJ## ;RETURN IF A MATCH
TRYQS1: MOVE T1,TABST0## ;ADR. OF FASTEST FILE STRUCTURE
MOVE T1,STRNAM##(T1) ;FILE STRUCTURE NAME
MOVEM T1,QUESTR## ;STORE FOR QUEUEING CUSPS GETTAB UUO
POPJ P, ;RETURN
SUBTTL DISK READING -- TRYUNI - CHECK UNIT STATUS
;ROUTINE TO SEE IF UNIT IS OFFLINE, ETC.
;CALL: PUSHJ P,TRYUNI
; <NON-SKIP> ;OFFLINE OR UNUSABLE
; <SKIP> ;ONLINE AND READY FOR I/O
TRYUNI: MOVSI T1,UNPOFL ;BIT TO TEST
TDNE T1,UNIDES(U) ;IS UNIT OFF-LINE OR DOWN?
POPJ P, ;JUST RETURN
XCTCPU (UNI,CHKCPY) ;CHECK CAPACITY OF UNIT
JRST TRYUN1 ;DON'T DISTURB DATA SETUP BY AUTCON
MOVEM T1,UNIBPU(U) ;BLOCKS PER UNIT (REGULAR)
MOVEM T2,UNIBPM(U) ;BLOCKS PER UNIT INCL. MAINT CYLS
MOVEM T3,UNIBUC(U) ;BLOCKS PER UNIT IN COMPAT. MODE
DPB W,UNYBPY## ;BLOCKS PER CYLINDER
HLRZ T3,W ;BLOCKS PER TRACK
DPB T3,UNYBPT## ;STORE # OF BLOCKS PER TRACK ON THIS UNIT
DPB T4,UNYUTP## ;STORE UNIT TYPE #
TRYUN1:
IFN FTDUAL,<
HRRZ W,UNIALT(U) ;SAVE UNIALT TO CHECK IF THIS IS FIRST UNIT
PUSHJ P,MATUN## ;ANY OTHER DRIVE WITH SAME SERIAL NUMBER?
JRST TRYUN2 ;NO
JUMPE W,TRYUN2 ;IF FIRST UNIT, DON'T NUKE IT, WAIT FOR SECOND
HLRZ T1,UNISYS(U) ;GET LINK TO NEXT UNIT BEFORE CALLING LN2ND
PUSH P,T1 ;(CAN'T TRUST UNISYS AFTER UNIT UNLINKED)
PUSHJ P,LN2ND## ;SETUP UNI2ND & UNLINK ALT PORT FROM UNISYS
POP P,U ;NEW UNIT TO RESUME WITH
TLNE T4,KOPNSU!KOPUHE ;NO SUCH UNIT OR UNIT HAD ERRORS?
POPJ P, ;SAY DRIVE IS UNUSABLE
JRST CPOPJ1## ;ELSE STOP PROCESSING ON THIS UNIT
> ;END IFN FTDUAL
TRYUN2: TLNE T4,KOPNSU!KOPUHE ;NO SUCH UNIT OR UNIT HAD ERRORS?
POPJ P, ;SAY DRIVE IS UNUSABLE
MOVSI T1,UNPHWP ;GET HWP BIT
ANDCAM T1,UNIDES(U) ;CLEAR IT
DPB T1,UNYAWL## ;CLEAR SOFTWARE WRITE-LOCKED
XCTCPU (UNI,CHKWLK) ;SEE IF UNIT IS WRITE ENABLED
JRST TRYUN3 ;IT IS
MOVEI T2,[ASCIZ /is hardware write protected/]
LDB T1,UNYAWL## ;DID SOFTWARE WRITE-LOCK SET?
SKIPE T1 ; TEST
MOVEI T2,[ASCIZ /is read-only/] ;CHANGE MESSAGE IF SO
MOVE T1,UDBNAM(U) ;GET UNIT NAME
PUSHJ P,UWARN ;PRINT MESSAGE
MOVSI T1,UNPHWP ;HARDWARE WRITE-PROTECT BIT
IORM T1,UNIDES(U) ;FLAG UNIT AS WRITE PROTECTED
TRYUN3: LDB T1,UNYUST## ;GET CURRENT STATE
PUSH P,T1 ;SAVE MOMENTARILY
LDB T1,UNYKTP##
CAIE T1,TYPRP ;IF THIS IS AN RP04
JRST TRYUN4 ;NOPE
MOVEI T1,UNVPIM ;IF WE READ HOME BLOCKS
DPB T1,UNYUST## ;A PACK MUST BE MOUNTED
MOVEI T2,0 ;FORMAT ERROR CAN ONLY BE DETECTED
PUSHJ P,OMNRED ; ON SECTOR 0, SO READ IT
TRNE S,IODTER ;IODTER = IODERR = 1
TRNN S,IODERR ; MEANS FORMAT ERROR (PDP-11 PACK)
JRST TRYUN4 ;ALL IS WELL SO FAR
MOVE T1,UDBNAM(U) ;GET UNIT NAME
MOVEI T2,[ASCIZ /contains a PDP-11 pack (considered offline)/]
PUSHJ P,UWARN ;PRINT MESSAGE
POP P,T1 ;GET OLD STATE BACK
DPB T1,UNYUST## ;RESET IT
POPJ P, ;INDICATE OFFLINE
TRYUN4: POP P,T1 ;GET OLD STATE BACK
DPB T1,UNYUST## ;RESET IT
JRST CPOPJ2## ;UNIT IS READY FOR I/O
SUBTTL DISK-SET PROCESSING -- CHGSET - CHANGE
CHGSET::PUSHJ P,SAVE1## ;SAVE P1
SETZ P1, ;GET A ZERO INITIALLY (ALL SETS)
MOVEI T1,SETTXT ;PROMPT STRING
PUSHJ P,ICONM## ;START THE MESSAGE
PUSHJ P,OPOUT## ;PUSH OUTPUT OUT
CHGSE1: PUSHJ P,GETLIN## ;GET OPERATOR'S RESPONSE
JRST CHGSE3 ;DONE
PUSHJ P,DECIN## ;READ RESPONSE
JRST CHGSE4 ;BAD RESPONSE
JRST CHGSE2 ;NOT DECIMAL
CAIL T2,^D1 ;IN RANGE OF 1
CAILE T2,^D36 ; TO 36?
JRST CHGSE4 ;NO
IOR P1,BITTBL##-1(T2) ;INCLUDE BIT FOR THIS SET NUMBER
JRST CHGSE1 ;ASK AGAIN
CHGSE2: PUSHJ P,CTEXT1## ;TRY FOR A KEYWORD
CAME T2,['ALL '] ;MOUNT ALL DISK-SETS?
JRST CHGSE4 ;BAD RESPONSE
MOVEI P1,0 ;ZERO MEANS ALL
CHGSE3: EXCH P1,DSKSET## ;STORE NEW VALUE, SAVE OLD
CAME P1,DSKSET## ;IF CHANGED,
JRST CHGSE5 ;GO EVALUATE THE SAFETY OF THIS
JRST CPOPJ1## ;RETURN
CHGSE4: MOVEI T1,[ASCIZ /% Bad response, try again/]
PUSHJ P,CONOUT## ;PRINT THE MESSAGE
JRST CHGSE1 ;ASK AGAIN
CHGSE5: SETZ T1, ;WE WANT THE FIRST ONE
PUSHJ P,RFIND ;SEE IF ANY STR NEEDS REFRESHING
TRNA ;NO--LOOK FOR CHANGE-FLAGGED UNITS
JRST CHGSE6 ;YES--GO MAKE SURE
PUSHJ P,CHKCHG ;SEE IF NEED TO REWRITE ANY HOM BLOCKS
JRST CHGSE8 ;NO--BUT WE NEED TO RE-READ THEM
CHGSE6: MOVEI T1,[ASCIZ /HOM blocks need re-writing./]
PUSHJ P,CONOUT## ;TYPE A MESSAGE
MOVEI T1,[ASCIZ /Re-write HOM blocks/]
MOVSI T2,'YES' ;DEFAULT TO KEEP CURRENT CHANGES
PUSHJ P,PRSYNQ## ;SEE WHAT THE OPERATOR WANTS
JUMPE T1,CHGSE8 ;HE'S A BRAVE FOOL
PUSHJ P,VFCORE ;CHECK WHAT WE HAVE NOW
SKIPE IGNORE## ;ERRORS--SEE IF WE CARE
JRST CHGSE7 ;IT'S OK--GO REWRITE THE HOM BLOCKS
MOVEI T1,[ASCIZ /Proceed despite errors/]
MOVSI T2,'NO ' ;GIVE IT A GO
PUSHJ P,PRSYNQ## ;ANOTHER CHANCE AT SANITY
JUMPN T1,CHGSE7 ;THIS ONE'S CRAZY, TOO
MOVEM P1,DSKSET## ;PUT THE DISK SET BACK
MOVEI T1,[ASCIZ /% Disk set change aborted/]
PUSHJ P,CONOUT## ;LET HIM KNOW
JRST CPOPJ1## ;RETURN HAPPY
CHGSE7: PUSHJ P,GOHOME ;RE-WRITE ALL HOM BLOCKS
CHGSE8: MOVEI T1,[ASCIZ /[Re-reading HOM blocks]/]
SKIPN .UONCE## ;EXEC MODE WON'T NORMALLY SAY THIS
PUSHJ P,CONOUT## ;BUT WE SHOULD FOR THIS CASE
SETOM ALTMFL## ;CLAIM THAT ALTMODE WAS TYPED SO WE WILL RE-READ
PUSHJ P,ALTM## ;MAKE SURE
JRST CPOPJ1## ;AND SUCCEED
SETTXT: ASCIZ /
Enter the desired disk-set numbers (1 - 36) or "ALL" for all
disk-sets, one per line. Terminate list with a blank line.
/
SUBTTL DISK-SET PROCESSING -- SHWSET - SHOW
SHWSET::PUSHJ P,SAVE3## ;SAVE SOME ACS
MOVEI T1,[ASCIZ /Disk-sets: /]
PUSHJ P,ICONM## ;PRINT TEXT
MOVNI P3,1 ;INIT A FLAG
MOVE P1,DSKSET## ;GET DISK-SET
CAME P1,[EXP -1] ;BOZO TYPE IN ALL 36 SETS?
JUMPN P1,SHWSE1 ;JUMP IF NOT ALL
MOVSI T2,'ALL' ;ALL DISK-SETS
PUSHJ P,PRNAME## ;PRINT TEXT
PJRST CRLFOP## ;END LINE AND RETURN
SHWSE1: JFFO P1,.+1 ;FIND FIRST BIT
ANDCM P1,BITTBL##(P2) ;CLEAR BIT
AOJE P3,SHWSE2 ;FIRST TIME THROUGH?
MOVEI T1,[ASCIZ /, /] ;NO
PUSHJ P,CONMES## ;SEPARATE FROM PREVIOUS
SHWSE2: MOVEI T1,1(P2) ;COPY SET NUMBER
PUSHJ P,PRTDIG## ;PRINT IT
JUMPN P1,SHWSE1 ;LOOP IF MORE SETS
PUSHJ P,CRLFOP## ;END LINE
PUSHJ P,CRLFOP## ;AN EXTRA CRLF FOR GOOD MEASURE
JRST CPOPJ1## ;RETURN
SUBTTL FILSER CORE INITIALIZATION
FILMEM::MOVE T1,SYSSIZ## ;GET SYSTEM SIZE INTO T1
ADDI T1,CRWDM1## ;MAKE SURE 4 WORD BLOCKS HAVE BOTTOM 2 BITS = 0
TRZ T1,CRWDM1##
MOVEM T1,SYSSIZ## ;FAKE OUT CALLS TO INICOR
MOVE T1,CORNUM## ;NUMBER OF 4-WORD BLOCKS TO GENERATE
IMULI T1,CORWDS## ;CONVERT TO WORDS
PUSHJ P,INICOR## ;ALLOCATE CORE
HRLZM T2,SYSCOR## ;SAVE STARTING ADDRESS
MOVE T1,CORNUM## ;GET BLOCK COUNT BACK
ADDI T2,CORWDS## ;ADVANCE POINTER
HRLZM T2,CORLNK##-CORWDS##(T2) ;SAVE ADDR OF NEXT BLOCK
SOJG T1,.-2 ;FINISHED YET?
SETZM CORLNK##-CORWDS##(T2) ;ZERO LINK TO SIGNAL END OF LIST
POPJ P, ;RETURN
SUBTTL SDL PROCESSING -- CHGSDL - CHANGE
CHGSDL::JRST DEFSDL ;SAME AS DEFINE
SUBTTL SDL PROCESSING -- DEFSDL - DEFINE
DEFSDL::PUSHJ P,SAVE4## ;SAVE AGAINST FNSTR
PUSH P,U ;SAVE U
MOVEI T1,SDLTXT ;PROMPT STRING
MOVE T2,[IFIW SDLVAL] ;ROUTINE TO VALIDATE RESPONSES
MOVE T3,[-^D36,,SUDTAB] ;AOBJN POINTER TO STORE RESULTS
PUSHJ P,PRSLST## ;PROMPT AND FETCH ANSWERS
MOVEI P2,SYSSTR##-STRSYS## ;SET PREDESSOR
DEFSD1: HLRZ P2,STRSYS##(P2) ;LINK TO NEXT STR IN SYSTEM
JUMPE P2,DEFSD2 ;DONE?
SKIPL STRSDL##(P2) ;NOT IN THE SDL?
PUSHJ P,CHGSTX ;THEN HOME BLOCKS WILL CHANGE
SETOM STRSDL##(P2) ;REMOVE FROM THE SDL
JRST DEFSD1 ;LOOP FOR ALL STRS
DEFSD2: MOVE P1,T1 ;GET UPDATED AOBJN POINTER TO TABLE
PUSH P,[-1] ;INIT POSITION COUNTER
DEFSD3: MOVE T1,(P1) ;GET A STRUCTURE NAME
PUSHJ P,FNSTR ;FIND IT
JRST DEFSD4 ;CANNOT HAPPEN SINCE NAME WAS VALIDATED
AOS T2,(P) ;GET NEXT POSITION NUMBER
MOVEM T2,STRSDL##(P2) ;SET POSITION IN STR DB
PUSHJ P,CHGSTX ;MARK HOME BLOCKS TO BE REWRITTEN
DEFSD4: AOBJN P1,DEFSD3 ;LOOP FOR ALL SPECIFIED STRUCTURES
ADJSP P,-1 ;TOSS JUNK
SETZM PRESDL## ;AND OTHER JUNK TOO
POP P,U ;RESTORE U
PJRST VFCORE ;GO VERIFY INCORE DATA BASE
SUBTTL SDL PROCESSING -- SHWSDL - SHOW
SHWSDL::PUSHJ P,SAVE3## ;SAVE SOME ACS
MOVEI T1,[ASCIZ /System dump list: /]
PUSHJ P,ICONM## ;PRINT TEXT
MOVNI P1,1 ;INIT A FLAG
MOVEI P2,SYSSTR##-STRSYS## ;SET PREDESSOR
MOVEI P3,6 ;SET A COUNTER
SHWSD1: HLRZ P2,STRSYS##(P2) ;LINK TO NEXT
JUMPE P2,SHWSD3 ;DONE?
SKIPGE STRSDL##(P2) ;STRUCTURE IN SSL?
JRST SHWSD1 ;NO
MOVEI T1,[ASCIZ /, /] ;PRINT
AOSE P1 ;FIRST TIME THROUGH?
PUSHJ P,CONMES## ; SEPARATOR
SOJG P3,SHWSD2 ;ROOM ON THE LINE FOR MORE?
PUSHJ P,CRLFOP## ;END THIS LINE
MOVEI T1,[ASCIZ / /]
PUSHJ P,ICONM## ;PRINT BLANKS
MOVEI P3,6 ;RESET COUNTER
SHWSD2: MOVE T2,STRNAM##(P2) ;GET STRUCTURE NAME
PUSHJ P,PRNAME## ;PRINT IT
JRST SHWSD1 ;LOOP FOR MORE
SHWSD3: PUSHJ P,CRLFOP## ;END LINE
PUSHJ P,CRLFOP## ;AN EXTRA CRLF FOR GOOD MEASURE
JRST CPOPJ1## ;RETURN
SUBTTL SDL PROCESSING -- MISCELLANEOUS
;VALIDATE AN SDL ENTRY
SDLVAL: MOVEI T2,[ASCIZ /does not exist/] ;INCASE OF ERROR
MOVEI T3,SYSSTR##-STRSYS## ;SET PREDESSOR
SDLVA1: HLRZ T3,STRSYS##(T3) ;LINK TO NEXT STR DB
JUMPE T3,SWARN ;END OF CHAIN?
CAME T1,STRNAM##(T3) ;KNOWN STRUCTURE?
JRST SDLVA1 ;TRY ANOTHER
SKIPE STRK4C##(T3) ;DOES IT HAVE CRASH SPACE?
JRST CPOPJ1## ;RETURN GOODNESS
MOVEI T2,[ASCIZ /has no crash space allocated/]
PJRST SWARN ;WARN OPERATOR AND RETURN
SDLTXT: ASCIZ /
Enter names of structures to appear in the system dump list, one
per line. Terminate list with a blank line./
SUBTTL SSL PROCESSING -- CHGSSL - CHANGE
CHGSSL::JRST DEFSSL ;SAME AS DEFINE
SUBTTL SSL PROCESSING -- DEFSSL - DEFINE
DEFSSL::PUSHJ P,SAVE4## ;SAVE AGAINST FNSTR
PUSH P,U ;SAVE U
MOVEI T1,SSLTXT ;PROMPT STRING
MOVE T2,[IFIW SSLVAL] ;ROUTINE TO VALIDATE RESPONSES
MOVE T3,[-.FSMAX,,SUDTAB] ;AOBJN POINTER TO STORE RESULTS
PUSHJ P,PRSLST## ;PROMPT AND FETCH ANSWERS
MOVEI P2,SYSSTR##-STRSYS## ;SET PREDESSOR
DEFSS1: HLRZ P2,STRSYS##(P2) ;LINK TO NEXT STR IN SYSTEM
JUMPE P2,DEFSS2 ;DONE?
SKIPL STRSRC##(P2) ;NOT IN THE SSL?
PUSHJ P,CHGSTX ;THEN HOME BLOCKS WILL CHANGE
SETOM STRSRC##(P2) ;REMOVE FROM THE SSL
JRST DEFSS1 ;LOOP FOR ALL STRS
DEFSS2: MOVE P1,T3 ;GET AOBJN POINTER TO LIST OF ANSWERS
PUSH P,[-1] ;INIT POSITION COUNTER
DEFSS3: MOVE T1,(P1) ;GET A STRUCTURE NAME
PUSHJ P,FNSTR ;FIND IT
JRST DEFSS4 ;CANNOT HAPPEN SINCE NAME WAS VALIDATED
AOS T2,(P) ;GET NEXT POSITION NUMBER
MOVEM T2,STRSRC##(P2) ;SET POSITION IN STR DB
PUSHJ P,CHGSTX ;MARK HOME BLOCKS TO BE REWRITTEN
DEFSS4: AOBJN P1,DEFSS3 ;LOOP FOR ALL SPECIFIED STRUCTURES
ADJSP P,-1 ;TOSS JUNK
SETZM PRESSL## ;AND OTHER JUNK TOO
POP P,U ;RESTORE U
PJRST VFCORE ;GO VERIFY INCORE DATA BASE
SUBTTL SSL PROCESSING -- DSKSSL - BUILD SSL FROM DISK
DSKSSL: PUSHJ P,SAVE4## ;SAVE SOME ACS
MOVE T1,[SUDTAB,,SUDTAB+1] ;SET UP BLT
SETZM SUDTAB ;CLEAR FIRST WORD
BLT T1,SUDTAB+.FSMAX-1 ;CLEAR OUT TABLE
SETZB P1,P3 ;INIT STRUCTURE & ERROR COUNTERS
MOVEI P2,SYSSTR##-STRSYS## ;SET PREDESSOR
DSKSS1: HLRZ P2,STRSYS##(P2) ;LINK TO NEXT STR
JUMPE P2,DSKSS2 ;DONE?
SKIPGE T1,STRSRC##(P2) ;IS THIS STRUCTURE IN THE SSL?
JRST DSKSS1 ;NO
SKIPE SUDTAB(T1) ;ENTRY ALREADY IN USE?
AOJA P3,DSKSS2 ;ERROR
MOVE T2,STRNAM##(P2) ;GET STR NAME
MOVEM T2,SUDTAB(T1) ;STORE IN RESPECTIVE SLOT
AOJA P1,DSKSS1 ;LOOP THROUGH FOR ALL STRS
DSKSS2: JUMPN P3,DSKSS5 ;JUMP IF MULTIPLE LOGICAL UNITS
MOVSI P3,-.FSMAX ;AOBJN POINTER
DSKSS3: SKIPE SUDTAB(P3) ;ENTRY IN USE?
JRST DSKSS4 ;NO
MOVEI T1,[ASCIZ /% Missing logical unit /]
PUSHJ P,ICONM## ;PRINT TEXT
HRRZ T1,(P3) ;GET NUMBER
PUSHJ P,PRTDIG## ;PRINT IT
MOVEI T1,[ASCIZ / in the system search list/]
PUSHJ P,CONMES## ;PRINT TEXT
DSKSS4: CAIL P1,(P3) ;CHECK ALL ENTRIES YET?
AOBJN P3,DSKSS3 ;LOOP FOR MORE
JUMPN P1,CPOPJ## ;NO--RETURN IF FOUND AT LEAST ONE STR
MOVEI T1,[ASCIZ/% No structures in system search list/]
PUSHJ P,CONOUT## ;PRINT MESSAGE AND RETURN
AOS SERIUS ;CALL THIS A SERIOUS ERROR
POPJ P, ;AND GIVE UP
DSKSS5: MOVEI T1,DSKSST ;POINT TO HEADER
PUSHJ P,CONOUT## ;PRINT MESSAGE
AOS SERIUS ;CALL THIS A SERIOUS ERROR
SETZ P1, ;INIT A COUNTER
MOVEI P2,SYSSTR##-STRSYS## ;SET PREDESSOR
DSKSS6: HLRZ P2,STRSYS##(P2) ;LINK TO NEXT STRUCTURE
JUMPE P2,CPOPJ## ;DONE?
SKIPGE STRSRC##(P2) ;IN THE SSL?
JRST DSKSS6 ;NO
MOVEI T1,[ASCIZ / /]
PUSHJ P,CONMES## ;SPACE OVER
MOVE T2,STRNAM##(P2) ;GET STRUCTURE NAME
PUSHJ P,PRNAME## ;PRINT IT
MOVEI T1,[ASCIZ / /]
PUSHJ P,CONMES## ;SPACE OVER
MOVE T1,STRSRC##(P2) ;GET POSITION IN THE SSL
MOVEI T2,^D2 ;COLUMN COUNT
PUSHJ P,NUMTYP ;PRINT IT
PUSHJ P,CRLFOP## ;END LINE
JRST DSKSS6 ;LOOP BACK FOR MORE
DSKSST: ASCIZ \
% System search list errors:
Structure Position
--------- --------\
SUBTTL SSL PROCESSING -- SHWSSL - SHOW
SHWSSL::PUSHJ P,SAVE3## ;SAVE SOME ACS
MOVE T1,[SUDTAB,,SUDTAB+1] ;SET UP BLT
SETZM SUDTAB ;CLEAR FIRST WORD
BLT T1,SUDTAB+.FSMAX-1 ;CLEAR TABLE
MOVE T1,[POSTAB,,POSTAB+1] ;SET UP BLT
SETZM POSTAB ;CLEAR FIRST WORD
BLT T1,POSTAB+.FSMAX-1 ;CLEAR TABLE
MOVSI P1,-.FSMAX ;AOBJN POINTER
MOVEI P2,SYSSTR##-STRSYS## ;SET PREDESSOR
SHWSS1: HLRZ P2,STRSYS##(P2) ;LINK TO NEXT
JUMPE P2,SHWSS2 ;DONE?
SKIPGE T1,STRSRC##(P2) ;STRUCTURE IN SSL?
JRST SHWSS1 ;NO
MOVEM T1,POSTAB(P1) ;SAVE POSITION
MOVE T2,STRNAM##(P2) ;GET STRUCTURE NAME
MOVEM T2,SUDTAB(P1) ;STORE IN RESPECTIVE SLOT
AOBJN P1,SHWSS1 ;LOOP FOR MORE
SHWSS2: MOVEI T1,SHWSST ;POINT TO HEADER
PUSHJ P,CONOUT## ;PRINT TEXT
MOVSI P1,-.FSMAX ;AOBJN POINTER
SHWSS3: SKIPN SUDTAB(P1) ;GET A NAME
JRST SHWSS4 ;EMPTY SLOT
MOVEI T1,[ASCIZ / /]
PUSHJ P,ICONM## ;SPACE OVER
MOVE T2,SUDTAB(P1) ;GET STRUCTURE NAME
PUSHJ P,PRNAME## ;PRINT IT
MOVEI T1,[ASCIZ / /]
PUSHJ P,CONMES## ;SPACE OVER
MOVE T1,POSTAB(P1) ;GET POSITION
MOVEI T2,^D2 ;COLUMN COUNT
PUSHJ P,NUMTYP ;PRINT IT
PUSHJ P,CRLFOP## ;END LINE
SHWSS4: AOBJN P1,SHWSS3 ;LOOP FOR MORE
PUSHJ P,CRLFOP## ;END LINE
JRST CPOPJ1## ;RETURN
SHWSST: ASCIZ \
System search list:
Structure Position
--------- --------\
SUBTTL SSL PROCESSING -- MISCELLANEOUS
;VALIDATE AN SSL ENTRY
SSLVAL: MOVEI T2,[ASCIZ /does not exist/] ;INCASE OF ERROR
MOVEI T3,SYSSTR##-STRSYS## ;SET PREDESSOR
SSLVA1: HLRZ T3,STRSYS##(T3) ;LINK TO NEXT STR DB
JUMPE T3,SWARN ;END OF CHAIN?
CAME T1,STRNAM##(T3) ;KNOWN STRUCTURE?
JRST SSLVA1 ;TRY ANOTHER
JRST CPOPJ1## ;RETURN GOODNESS
SSLTXT: ASCIZ /
Enter names of structures to appear in the system search list,
one per line. Terminate list with a blank line./
SUBTTL STARTUP OPTION -- COMMON TEXT
INTRO: ASCIZ \
In the following dialogue, all numbers are decimal unless
otherwise indicated. Values within parenthesis are options.
Values within square brackets are defaults which will be
substituted if RETURN is pressed.\
REFPRM: ASCIZ \
Any question preceeded with an asterisk indicates changing that
parameter will require the structure to be refreshed.
\
INIMSG: ASCIZ \
*** Note ***
HOME blocks will be initialized immediately after all units in
the structure have been entered.
\
GETUNM: MOVEI P3,STRUNI##(P2) ;SET PREDESSOR UDB
SETZ P1,
GETUN1: PUSHJ P,PRSSET## ;SET UP SPECIAL BUFFER, .CPTOA, ETC.
PUSH P,T1 ;SAVE OLD CHARACTER TYPER
MOVEI T1,[ASCIZ /Disk drive for logical unit /]
PUSHJ P,CONMES## ;STORE IN BUFFER
MOVE T1,STRUNM##(P2) ;GET COUNT SO FAR
PUSHJ P,PRTDI8## ;STORE IN BUFFER
POP P,.CPTOA## ;RESTORE CHARACTER STICKER
GETUN2: MOVEI T1,TXTBUF## ;POINT TO PROMPT STRING
SETZ T2, ;NO DEFAULT DISK DRIVE
PUSHJ P,PRSSIX## ;GET A SIXBIT QUANTITY
SKIPE T2,T1 ;COPY TO A DIFFERENT PLACE
JRST GETUN3 ;AND GO CHECK IT OUT
SKIPE STRUNM##(P2) ;ANY UNITS IN THIS STRUCTURE?
JRST CPOPJ1## ;YES--SO ALL DONE
MOVE T1,STRNAM##(P2) ;GET STR NAME
MOVEI T2,[ASCIZ /has no logical units/]
PUSHJ P,SWARN ;WARN OPERATOR
POPJ P, ;BUT LET HIM OUT
GETUN3: HLRZ U,SYSUNI## ;GET FIRST UNIT DATA BLOCK IN SYSTEM
GETUN4: CAME T2,UNIHID(U) ;ACCEPT MATCH ON UNIT ID
CAMN T2,UDBNAM(U) ;MATCH?
JRST GETUN5 ;YES
HLRZ U,UNISYS(U) ;GET NEXT UNIT DATA BLOCK ADR. IN SYSTEM
JUMPN U,GETUN4 ;REPEAT IF THERE IS ONE
MOVEI T2,[ASCIZ /does not exist/]
PUSHJ P,UWARN ;WARN OPERATOR
JRST GETUN2 ;TRY AGAIN
GETUN5: PUSHJ P,CKUSTR ;MAKE SURE IT'S NOT PART OF A MOUNTED STRUCTURE
JRST GETUN2 ;TRY AGAIN IF IT IS
HRRZ T1,UNISTR(U) ;SEE IF THIS UNIT IS ALREADY IN AN STR
JUMPE T1,GETUN6 ;T1 = 0 IF IT ISN'T
MOVE T1,UDBNAM(U) ;GET DRIVE NAME
MOVEI T2,[ASCIZ /is part of an existing structure/]
PUSHJ P,UWARN ;ISSUE WARNING TO OPERATOR
JRST GETUN2 ;AND TRY AGAIN
GETUN6: PUSHJ P,INSUN1 ;NO - JUST PUT THIS UNIT INTO THE STR
JRST GETUN2 ;UNIT ALREADY IN A STRUCTURE
PUSHJ P,HGHSIZ ;COMPUTE STRHGH & STRSIZ FOR THIS STR
MOVE T1,STRNAM##(P2) ;GET STRUCTURE NAME
CAME T1,['KLAD '] ;IS IT THE DIAGNOSTICS PACK?
JRST GETUN1 ;NO - GET THE NEXT UNIT
JRST CPOPJ1## ;YES - WE'RE DONE WITH ONE UNIT
;INITIALIZE BAT BLOCKS
INIBAT: PUSHJ P,SAVE1## ;SAVE P1
PUSH P,P4 ;SAVE P4
PUSHJ P,GTODDB ;GET ONCE-ONLY DDB ADDRESS
PUSHJ P,GTMNB1 ;GET MONITOR BUFFER
AOS P1,T1 ;SAVE ADDRESS
HRRZS P1 ;NO JUNK IN LH
MOVE T1,P1 ;COPY BUFFER ADDRESS
HRLS T1 ;PUT IN LH TOO
AOS T1 ;MAKE A BLT POINTER
SETZM (P1) ;CLEAR FIRST WORD
BLT T1,BLKSIZ##-1(P1) ;CLEAR ENTIRE BUFFER
MOVSI T1,'BAT' ;NAME
MOVEM T1,BLKNAM##(P1)
MOVEI T1,CODBAT ;UNIQUE CODE
MOVEM T1,BLKCOD##(P1)
MOVSI T1,MBRMAX## ;SETUP AOBJN PTR. TO BE STORED IN BLOCK
HRRI T1,BAFREG## ;ORIGIN OF FIRST BAD REGION
MOVEM T1,BAFFIR##(P1)
MOVE J,UDBKDB(U) ;GET KDB ADDRESS
MOVE T1,KDBDVC(J) ;AND DEVICE CODE FOR THE KONTROLLER
DPB T1,BAYKDC## ;SAVE IT IN THE BLOCK
MOVE P4,[LBOBAT##,,LBOBAT##] ;FIRST,,SECOND BAT BLOCK NUMBERS
ADD P4,UNIHOM(U) ;OFFSET TO BAT BLOCKS
PUSHJ P,WRTRUN ;WRITE BOTH BAT BLOCKS
SETZ P1, ;INDICATE FAILURE
PUSHJ P,GVMNB0 ;RETURN MONITOR BUFFER
PUSHJ P,GVODDB ;RETURN ONCE DDB
POP P,P4 ;RESTORE P4
JUMPE P1,CPOPJ## ;RETURN ON ERRORS
MOVEI T1,[ASCIZ /[BAT blocks initialized on /]
PUSHJ P,ICONM## ;PRINT TEXT
MOVE T2,UDBNAM(U) ;GET DRIVE NAME
PUSHJ P,PRNAME## ;PRINT IT
MOVEI T1,[ASCIZ /]/] ;END MESSAGE
PUSHJ P,CONMES## ;PRINT IT
PJRST CRLFOP## ;END LINE AND RETURN
;INITIALIZE HOME BLOCKS
INIHOM: PUSHJ P,SAVE1## ;SAVE P1
PUSH P,T1 ;SAVE TYPEOUT FLAG
PUSH P,P4 ;SAVE P4
PUSHJ P,GTODDB ;GET ONCE-ONLY DDB ADDRESS
PUSHJ P,GTMNB1 ;GET MONITOR BUFFER
AOS P1,T1 ;SAVE ADDRESS
HRRZS P1 ;NO JUNK IN LH
MOVE T1,P1 ;COPY BUFFER ADDRESS
HRLS T1 ;PUT IN LH TOO
AOS T1 ;MAKE A BLT POINTER
SETZM (P1) ;CLEAR FIRST WORD
BLT T1,BLKSIZ##-1(P1) ;CLEAR ENTIRE BUFFER
MOVSI T1,'HOM' ;NAME
MOVEM T1,BLKNAM##(P1)
MOVEI T1,CODHOM ;UNIQUE CODE
MOVEM T1,BLKCOD##(P1)
MOVE P4,[LBNHOM##,,LB2HOM##] ;FIRST,,SECOND HOME BLOCK NUMBERS
MOVEM P4,HOMHOM##(P1)
SETOM HOMSUN##(P1) ;INDICATE UNIT NOT IN ASL
SETOM HOMSRC##(P1) ;INDICATE STR NOT IN SSL
SETOM HOMSDL##(P1) ;INDICATE STR NOT IN SDL
LDB T1,UNYUTP##
MOVEM T1,HOMUTP##(P1) ;SET RIGHT UNIT IN HOME BLOCK
PUSHJ P,WRTVID ;SETUP SYSTEM TYPE IN FUNNY FORMAT
PUSHJ P,WRTRUN ;WRITE BOTH "HOME" BLOCKS
SETZ P1, ;INDICATE ERRORS
PUSHJ P,GVMNB0 ;RETURN MONITOR BUFFER
PUSHJ P,GVODDB ;RETURN ONCE DDB
POP P,P4 ;RESTORE P4
JUMPE P1,TPOPJ## ;RETURN ON ERRORS
POP P,T1 ;GET FLAG BACK
JUMPE T1,CPOPJ## ;RETURN IF NO TYPEOUT WANTED
MOVEI T1,[ASCIZ /[HOM blocks initialized on /]
PUSHJ P,ICONM## ;PRINT TEXT
MOVE T2,UDBNAM(U) ;GET DRIVE NAME
PUSHJ P,PRNAME## ;PRINT IT
MOVEI T1,[ASCIZ /]/] ;END MESSAGE
PUSHJ P,CONMES## ;PRINT IT
PJRST CRLFOP## ;END LINE AND RETURN
SUBTTL STARTUP OPTION -- .DESTR - DESTROY
.DESTR::MOVEI T1,[ASCIZ/
% WARNING: All structures will be refreshed. All disk files
will be destroyed. All information on currently spinning packs
will be lost. Do not proceed unless you are positive that you
want to do this./]
PUSHJ P,CONOUT## ;PRINT WARNING
MOVEI T1,[ASCIZ /Proceed/]
MOVSI T2,'NO ' ;DEFAULT ANSWER
PUSHJ P,PRSYNQ## ;PROMPT AND FETCH ANSWER
JUMPE T1,CPOPJ## ;RETURN IF HE SAID "NO"
HLRZ U,SYSUNI## ;FIRST UNIT IN SYSTEM
DESTR1: PUSHJ P,DELSAB ;DELETE SAB RING AND SPT TABLE
MOVSI T1,UNPOFL!UNPHWP ;BITS WHICH MAKE THIS UNIT USELESS
TDNE T1,UNIDES(U) ;ANY CHANCE OF USING THIS ONE?
JRST DESTR2 ;NOPE
MOVEI T1,0 ;CODE FOR SILENT INITIALIZATION
PUSHJ P,INIHOM ;INITIALIZE HOME BLOCKS
MOVEI T1,1 ;CODE FOR MANDATORY INIT OF BAT BLOCKS
PUSHJ P,GETBAT ;CHECK OUT BAT BLOCKS
PUSHJ P,INIBAT ;NEED TO INITIALIZE BAT BLOCKS
MOVSI T1,UNPCHG
ANDCAM T1,UNIDES(U) ;CLEAR OUT UNPCHG
DESTR2: HLRZ U,UNISYS(U) ;NEXT UNIT
JUMPN U,DESTR1 ;UNITS ARE LEFT-GO FOR MORE
MOVEI T1,[ASCIZ /[HOME blocks initialized on all units]/]
PUSHJ P,CONOUT## ;PRINT MESSAGE
PUSHJ P,GTODDB ;GET ONCE-ONLY DDB ADDRESS
PUSHJ P,GVMNB0 ;GIVE BACK MONITOR BUFFER
PUSHJ P,RDDISK ;READ THE DISKS AGAIN
JFCL ;IGNORE ERRORS
PUSHJ P,REDBAT ;READ BAT BLOCKS ALSO
PUSHJ P,GTODDB ;GET ONCE-ONLY DDB ADDRESS
JRST CPOPJ1## ;RETURN
SUBTTL STARTUP OPTION -- .DISSO - DISOLVE STRUCTURE
.DISSO::MOVEI T1,[ASCIZ /Structure to dissolve/]
SETZ T2, ;NO DEFAULT STRUCTURE NAME
PUSHJ P,PRSSIX## ;GET A SIXBIT QUANTITY
JUMPE T1,VFCORE ;GO VERIFY INCORE DATA BASE IF NO MORE
PUSHJ P,FNSTR ;ALREADY EXIST?
SKIPA T2,[[ASCIZ /does not exist/]]
JRST DISSO1 ;ONWARD
PUSHJ P,SWARN ;WARN OPERATOR
JRST .DISSO ;TRY AGAIN
DISSO1: MOVEI T1,[ASCIZ /All data will be destroyed. Are you sure/]
MOVSI T2,'NO ' ;DEFAULT ANSWER
PUSHJ P,PRSYNQ## ;ASK THE OPERATOR
JUMPE T1,.DISSO ;QUIT THIS ONE NOW IF "NO"
HLRZ U,STRUNI##(P2) ;GET FIRST UNIT IN STRUCTURE
JUMPE U,DISSO2 ;JUST UNLINK STR IF IT HAS NO UNITS
PUSHJ P,CKUSTR ;SEE IF WE SHOULD ABORT WITH A MOUNTED STR
JRST .DISSO ;YES--LET HIM TRY WITH ANOTHER
PUSHJ P,DISSO3 ;GO TAKE CARE OF ALL UNITS IN STR
DISSO2: HLL T3,STRSYS##(P2) ;GET NEXT STR DB IN SYSTEM
HLLM T3,STRSYS##(P3) ;LINK TO PREDESSOR
SKIPL T1,STRSRC##(P2) ;WAS THIS STR IN SSL?
PUSHJ P,FIXSSL ;YES, CLOSE UP THE SLOT
SKIPL T1,STRSDL##(P2) ;WAS THIS STR IN SDL?
PUSHJ P,FIXSDL ;YES, CLOSE UP THE SLOT
PUSHJ P,KSTR ;KILL OFF THE STR DB
JRST .DISSO ;AND LOOP BACK FOR ANOTHER STRUCTURE
DISSO3: MOVSI T1,UNPNNA ;USER-MODE TIMESHARED BIT
ANDCAM T1,UNIDES(U) ;DISSOLVE MEANS IT'S TOO LATE TO BE SORRY
SETZM UNIHID(U) ;CLEAR OUT LOGICAL UNIT NAME
SETZB T3,UNILOG(U) ;CLEAR OUT NAME OF LOGICAL UNIT WITHIN STR
EXCH T3,UNISTR(U) ;CLEAR OUT LINKS TO STR & NEXT UNIT DATA BLOCKS
HLRZS T3 ;PUT IN A BETTER HALF-WORD
PUSH P,T3 ;AND SAVE FROM IMPENDING DISASTER
HRRZS UNIGRP(U) ;CLEAR # CLUSTERS TRIED FOR ON O/P
PUSHJ P,DELSST ;RETURN SWAPPING SATS
PUSHJ P,DELSAB ;DELETE SAB RING AND SPT TABLE
MOVEI T1,0 ;GET A ZERO
DPB T1,UNYBPC## ;CLEAR # BLOCKS PER CLUSTER
DPB T1,UNYSPU## ;SET SPU AND SIC TO ZEROES...
DPB T1,UNYSIC## ;SO GETSPU AND GETSIC WILL RECREATE THE SAB
;IF THIS UNIT IS PUT INTO A NEW STRUCTURE
PUSHJ P,SETCHG ;HOME BLOCKS MUST BE REWRITTEN
POP P,U ;GET NEXT UNIT IN STRUCTURE BACK
JUMPN U,DISSO3 ;LOOP BACK IF MORE
POPJ P, ;ELSE RETURN
SUBTTL STARTUP OPTION -- .REFRE - REFRESH
.REFRE::SETZ T1, ;FIND FIRST STRUCTURE TO REFRESH
PUSHJ P,RFIND ;...
JRST REFRE4 ;THERE ARE NONE SO JUST PROMPT
PUSHJ P,CRLFOP## ;START WITH A CRLF
MOVEI T1,[ASCIZ /Needs refreshing: /]
PUSHJ P,ICONM## ;PRINT TEXT
JRST REFRE2 ;ENTER LOOP
REFRE1: SKIPN P4,TABSTR##(P3) ;GET A STR DB
JRST REFRE3 ;NONE HERE
HLLZ T2,STRREF##(P4) ;NEEDS REFRESHING FLAG
JUMPE T2,REFRE3 ;NOT THIS ONE
REFRE2: MOVEI T1,[ASCIZ /, /] ;SEPARATOR
CAME P1,STRNAM##(P4) ;THE FIRST STRUCTURE?
PUSHJ P,CONMES## ;NO--SEPARATE FROM PREVIOUS
MOVE T2,STRNAM##(P4) ;GET STR NAME
PUSHJ P,PRNAME## ;PRINT IT
REFRE3: AOBJN P3,REFRE1 ;LOOP FOR ALL STRS
PUSHJ P,CRLFOP## ;TERMINATE LINE
REFRE4: SETZ T1, ;WANT FIRST NEEDING TO BE REFRESHED
PUSHJ P,RFIND ;LOOK FOR A STR
SETZ T1, ;NONE NEED REFRESHING
MOVE T2,T1 ;LOAD UP DEFAULT STRUCTURE NAME
MOVEI T1,[ASCIZ /Structure to refresh/]
PUSHJ P,PRSSIX## ;ASK OPERATOR
JUMPE T1,VFCORE ;GO VERIFY INCORE DATA BASE IF NO MORE
REFRE5: PUSHJ P,RFIND ;MAKE SURE REQUESTED STR REALLY EXISTS
SKIPA T2,[[ASCIZ /does not exist/]]
JRST REFRE6 ;ONWARD
PUSHJ P,SWARN ;WARN THE OPERATOR
JRST REFRE4 ;LET THE FOOL TRY AGAIN
REFRE6: HLLZ T2,STRREF##(P2) ;IF STR NEEDS REFRESHING
JUMPN T2,REFRE7 ; DON'T ASK IF HE IS SURE
MOVEI T1,[ASCIZ /Structure does not need refreshing. Are you sure/]
MOVSI T2,'NO ' ;DEFAULT ANSWER
PUSHJ P,PRSYNQ## ;ASK THE OPERATOR
JUMPE T1,REFRE4 ;CAN'T MAKE UP HIS MIND
HLRZ U,STRUNI##(P2) ;GET FIRST UNIT IN STRUCTURE
PUSHJ P,CKUSTR ;MAKE SURE IT'S NOT MOUNTED
JRST REFRE4 ;LET HIM OUT OF THIS ONE
SKIPGE STRSDL##(P2) ;STR IN THE SDL?
SKIPL STRSRC##(P2) ;OR THE SSL?
SKIPA T1,[[ASCIZ /This is a system structure. Are you positive/]]
JRST REFRE7 ;NOT IN SYS SEARCH LIST. DO IT
MOVSI T2,'NO ' ;DEFAULT ANSWER
PUSHJ P,PRSYNQ## ;ASK THE OPERATOR
JUMPE T1,REFRE4 ;WIMP
REFRE7: PUSHJ P,GTMNB1 ;GET A MONITOR BUFFER
HLRZ U,STRUNI##(P2) ;GET FIRST UNIT IN STRUCTURE
REFR10: MOVSI T1,UNPHWP!UNPOFL ;WRITE-PROTECT OR OFFLINE
TDNN T1,UNIDES(U) ;CHECK SUCH BADNESS
JRST REFR11 ;NOT A PROBLEM--KEEP LOOKING
MOVE T1,UDBNAM(U) ;GET UNIT NAME
MOVEI T2,[ASCIZ /is off-line or hardware write-protected/]
PUSHJ P,UWARN ;COMPLAIN ABOUT THE UNIT
MOVE T1,STRNAM##(P2) ;GET STR NAME
MOVEI T2,[ASCIZ /cannot be refreshed/]
PUSHJ P,SWARN ;THEN COMPLAIN ABOUT THE STRUCTURE
JRST REFRE4 ;TRY FOR ANOTHER
REFR11: SKIPN UNISAB(U) ;IF NO SAB CREATED YET,
PUSHJ P,CRESAB ;DO IT. REFSTR NEEDS IT.
MOVSI T1,UNPCHG ;THE 'CHANGED' BIT
TDNN T1,UNIDES(U) ;DID WE CHANGE ANYTHING?
JRST REFR12 ;NO--NO NEED TO RE-WRITE HOM BLOCKS
PUSHJ P,HOMWRT ;YES--DO IT
MOVEI T1,[ASCIZ /[Updated HOM blocks on unit /]
PUSHJ P,ICONM## ;SAY WHAT WE DID
MOVE T2,UDBNAM(U) ;GET UNIT NAME
PUSHJ P,PRNAME## ;SAY TO WHICH UNIT
PUSHJ P,PRRBKC## ;END BRACKET AND LINE
PUSHJ P,OPOUT## ;FLUSH THE OUTPUT
REFR12: HLRZ U,UNISTR(U) ;GET NEXT UNIT IN STRUCTURE
JUMPN U,REFR10 ;CHECK ALL UNITS IN THE STRUCTURE
PUSHJ P,REFSTR## ;REFRESH STR
JRST REFR13 ;GO GIVE ERROR MESSAGE
HLRZ U,STRUNI##(P2) ;GET FIRST UNIT IN STRUCTURE
PUSH P,P2 ;SAVE STR DB
PUSH P,[EXP -1] ;INIT A FLAG
REFRE8: PUSHJ P,DELSST ;CLEAR OUT SOME POSSIBLY STALE DATA
PUSHJ P,DELSAB ;IN CASE THE REFRESH WAS FLAWED
PUSHJ P,GTHOM ;READ THE HOME BLOCKS
JRST REFRE9 ;CAN'T HAPPEN (WE THINK)
MOVE P2,-1(P) ;GET STR DB BACK
AOSN (P) ;FIRST TIME THROUGH?
PUSHJ P,MOVSTR ;UPDATE STR DB FROM HOME BLOCKS
PUSHJ P,MOVUNI ;UPDATE CHANGES MADE TO HOME BLOCKS IN UDBS
PUSHJ P,CRESAB ;RESTORE SAB RING & SPT
HLRZ U,UNISTR(U) ;LINK TO NEXT UNIT IN STRUCTURE
JUMPN U,REFRE8 ;LOOP FOR MORE UNITS
REFRE9: ADJSP P,-2 ;PHASE STACK
MOVEI T1,[ASCIZ /[Structure /]
PUSHJ P,ICONM## ;BEGIN OUR MESSAGE
MOVE T2,STRNAM##(P2) ;GET STRUCTURE NAME
PUSHJ P,PRNAME## ;SAY WHICH STRUCTURE
MOVEI T1,[ASCIZ / refreshed]/]
PUSHJ P,CONMES## ;SAY WHAT WE DID
PUSHJ P,CRLFOP## ;FLUSH THE LINE
JRST REFRE4 ;ASK FOR ANOTHER STR NAME TO BE REFRESHED
REFR13: MOVE T1,STRNAM##(P2) ;GET STR NAME
MOVEI T2,[ASCIZ /could not be refreshed/]
PUSHJ P,SWARN ;COMPLAIN ABOUT THE PROBLEM
JRST REFRE4 ;ASK FOR ANOTHER VICTIM
;FIND A STRUCTURE WHICH NEEDS TO BE REFRESHED
;CALL: MOVE T1, NAME OR ZERO FOR FIRST STR NEEDING TO BE REFRESHED
; PUSHJ P,RFIND
;
;RETURNS WITH P1 = STR NAME & P2 = STR DATA BLOCK ADDRESS
RFIND: MOVE P3,STRAOB## ;AOBJN POINTER TO STRUCTURE TABLE
SETZB P1,P2 ;NO STR NAME OR STR DATA BLOCK YET
RFIND1: SKIPN P4,TABSTR##(P3) ;ADDR OF NEXT STR DATA BLOCK
JRST RFIND5 ;NONE HERE
JUMPE T1,RFIND2 ;JUMP IF WANT FIRST NEEDING REFRESHING
CAMN T1,STRNAM##(P4) ;THE ONE WE WANTED?
JRST RFIND3 ;YES
RFIND2: HLLZ T2,STRREF##(P4) ;NEEDS REFRESHING FLAG
JUMPE T2,RFIND5 ;NOT THIS ONE
JUMPE T1,RFIND3 ;USE THIS STRUCTURE IF FIRST REQUESTED
CAME T1,STRNAM##(P4) ;THE ONE WE WANTED?
JRST RFIND5 ;NO
RFIND3: SKIPN .UONCE## ;USER MODE?
JRST RFIND4 ;NO--JUST DO REFRESH
PUSHJ P,UCKREF## ;SEE IF MOUNTED UNDER TIMESHARING
JRST RFIND5 ;CAN'T REFRESH MOUNTED STRUCTURE
RFIND4: MOVE P1,STRNAM##(P4) ;SET IT UP
MOVE P2,P4 ;COPY STR DB ADDRESS
JRST CPOPJ1## ;RETURN GOODNESS
RFIND5: AOBJN P3,RFIND1 ;KEEP SEARCHING
POPJ P, ;NO SUCH STR
SUBTTL STRUCTURE ROUTINES -- CHGSTR - CHANGE
CHGSTR::AOSE BLURBF ;OPERATOR SEEN THIS TEXT BEFORE?
JRST CHGST1 ;YES
PUSHJ P,PRSCON## ;SEE IF WE WANT THIS CRUFT
JRST CHGST1 ;NO--DON'T CLOBBER THE TYPEAHEAD
MOVEI T1,INTRO ;INTRODUCTORY TEXT
PUSHJ P,CONOUT## ;PRINT IT
MOVEI T1,REFPRM ;SPECIAL PARAMETER DISCLAIMER
PUSHJ P,CONOUT## ;PRINT IT
CHGST1: MOVEI T1,[ASCIZ /Structure to change/]
SETZ T2, ;NO DEFAULT
PUSHJ P,PRSSIX## ;PROMPT AND FETCH ANSWER
JUMPE T1,VFCORE ;GO VERIFY INCORE DATA BASE IF NO MORE
PUSHJ P,FNSTR ;FIND STRUCTURE
SKIPA T2,[[ASCIZ /does not exist/]]
JRST CHGST2 ;FOUND
PUSHJ P,SWARN ;WARN OPERATOR
JRST CHGSTR ;AND TRY AGAIN
CHGST2: MOVEI T1,[ASCIZ /Change unit parameters for this structure/]
MOVSI T2,'NO ' ;DEFAULT
PUSHJ P,PRSYNQ## ;PROMPT AND FETCH ANSWER
MOVEM T1,UNITFL ;SAVE FLAG
HLRZ U,STRUNI##(P2) ;GET FIRST UNIT IN STRUCTURE
PUSHJ P,CKUSTR ;MAKE SURE WE WANT TO PROCEED IF MOUNTED
JRST CHGSTR ;TRY AGAIN IF NOT
SKIPN UNITFL ;IF NOT CHANGING UNITS,
JRST CHGST3 ;THEN DON'T CHANGE BAT BLOCKS
MOVEI T1,[ASCIZ /Do you want to see the BAT blocks/]
MOVSI T2,'NO ' ;DEFAULT
PUSHJ P,PRSYNQ## ;PROMPT AND FETCH ANSWER
MOVEM T1,BATFLG ;SAVE FOR LATER USE
CHGST3: MOVEI T1,[ASCIZ /Parameters for structure /]
PUSHJ P,ICONM## ;PRINT MESSAGE
MOVE T2,STRNAM(P2) ;GET STRUCTURE NAME
PUSHJ P,PRNAME## ;PRINT IT
PUSHJ P,CRLFOP## ;END LINE
PUSHJ P,GETSTN ;GET NEW NAME
PUSHJ P,GETBPC ;GET BLOCKS PER CLUSTER
PUSHJ P,GETPRV ;GET PRIVATE STATUS
PUSHJ P,GETOPP ;GET OWNER PPN
PUSHJ P,GETDSN ;GET DISK-SET NUMBERS
PUSHJ P,GETK4C ;GET K FOR CRASH.SAV
PUSHJ P,GETOVR ;GET OVERDRAW
PUSHJ P,GETGAR ;GET GUARANTEED BLOCKS
PUSHJ P,GETGRP ;GET BLOCKS TO TRY FOR ON OUTPUT
PUSHJ P,GETCNP ;GET BITS PER CLUSTER COUNT
SKIPN UNITFL ;CHANGING UNIT PARAMETERS TOO?
JRST CHGST6 ;NO
HLRZ U,STRUNI##(P2) ;POINT TO FIRST UNIT IN STRUCTURE
CHGST4: PUSHJ P,CRLFOP## ;START WITH A BLANK LINE
MOVEI T1,[ASCIZ /Parameters for unit /]
PUSHJ P,ICONM## ;PRINT TEXT
MOVE T2,UDBNAM(U) ;GET NAME
PUSHJ P,PRNAME## ;PRINT IT
PUSHJ P,CRLFOP## ;END LINE
PUSHJ P,GETUID ;GET UNIT ID
PUSHJ P,GETSPU ;GET SATS PER UNIT
PUSHJ P,GETSIC ;GET SATS IN CORE
PUSHJ P,GETK4S ;GET K FOR SWAPPING
PUSHJ P,GETSWB ;GET FIRST SWAPPING BLOCK NUMBER
PUSHJ P,GETCFS ;GET CLASS FOR SWAPPING
SKIPN BATFLG ;DO WE WANT TO SEE THE BAT BLOCKS?
JRST CHGST5 ;NO--SKIP THIS
MOVEI T1,0 ;YES--GET FLAG FOR OPTIONAL INIT OF BAD BLOCKS
PUSHJ P,GETBAT ;CHECK AND DISPLAY THE BAF
PUSHJ P,INIBAT ;INITIALIZE IF NEEDED
CHGST5: HLRZ U,UNISTR(U) ;LINK TO NEXT UNIT IN STRUCTURE
JUMPN U,CHGST4 ;LOOP IF MORE
CHGST6: JRST CHGST1 ;LOOP BACK FOR ANOTHER STRUCTURE
SUBTTL STRUCTURE ROUTINES -- CHKSTR - MAKE SURE STRS HAVE ALL NEEDED UNITS
CHKSTR: HLRZ P2,SYSSTR## ;GET ADDR OF FIRST STR DATA BLOCK IN SYSTEM
JUMPE P2,CPOPJ## ;THERE ARE NONE - NON SKIP RETURN
CHKST1: HRRZ T1,STRUNM##(P2)
JUMPN T1,CHKST3 ;WAS THE LAST UNIT IN THIS STR FOUND?
PUSH P,STRREF##(P2) ;SAVE STATE OF 'NEEDS REFRESHING' FLAG
MOVEI T1,[ASCIZ /
% Last unit wasn't found in structure /]
PUSHJ P,MSGSTR ;NO - PRINT MSG. FOLLOWED BY SIXBIT STR NAME
HLRZ T1,STRUNI##(P2) ;GET ADR. OF 1ST. UNIT DATA BLOCK IN STR
CHKST2: MOVE U,T1 ;LOAD UP UDB
HLRZ T1,UNISTR(U) ;GET ADR. OF NEXT UNIT DATA BLOCK IN STR
JUMPN T1,CHKST2 ;REPEAT UNTIL LAST ONE FOUND
LDB T1,UNYLUN## ;GET ITS LOG. UNIT # IN STR
ADDI T1,1 ;MAKE INTO # UNITS IN STR
HRRM T1,STRUNM##(P2) ; & STORE IT
POP P,T1 ;RESTORE STATE OF 'NEEDS REFRESHING' FLAG
HLLM T1,STRREF##(P2) ;(RH OF STRREF IS STRUNM, SET ABOVE)
CHKST3: HLRZ U,STRUNI##(P2) ;GET ADR. OF 1ST. UNIT DATA BLOCK IN THIS STR
SETOM P4 ;SETUP FAKE PREVIOUS LOG. UNIT #
CAIA
CHKST4: HLLM T2,UNIGRP(U) ;STORE # CLUSTERS TRIED ON O/P IN EACH UNIT
LDB P1,UNYLUN## ;GET LOG. UNIT # OF THIS UNIT WITHIN STR
EXCH P1,P4 ;PUT THIS & PREVIOUS LOG. UNITS IN PROPER ACS
CAME P4,P1 ;ARE LOG. UNIT #'S THE SAME?
JRST CHKST5 ;NO - CHECK FOR MISSING UNITS
MOVEI T3,[ASCIZ /
% Two logical unit /]
MOVEI T1,[ASCIZ /s found in structure /]
PUSHJ P,MSGLNG ;PRINT MSGS FOLLOWED BY SIXBIT STR NAME
JRST CHKST6 ;CHECK NEXT PAIR OF UNITS
CHKST5: CAIN P4,1(P1) ;IS THIS UNIT 1 GREATER THAN LAST ONE?
JRST CHKST6 ;YES - CHECK NEXT PAIR OF UNITS
ADDI P1,1 ;INCREMENT TO GET CORRECT MISSING LOG. UNIT #
MOVEI T3,[ASCIZ /
% Logical unit /]
MOVEI T1,[ASCIZ / missing from structure /]
PUSHJ P,MSGLNG
JRST CHKST5 ;REPEAT UNTIL ALL MISSING ARE TYPED OUT
CHKST6: MOVE T1,UNIBPU(U) ;GET # BLOCKS ON THIS UNIT
ADDM T1,STRSIZ##(P2) ;ADD TO TOTAL # IN THIS STR
MOVE T1,STRBPU##(P2) ;GET # OF BLOCKS ON LARGEST UNIT IN STR
ADDM T1,STRHGH##(P2) ;ADD TO TOTAL LOGICAL # IN THIS STR
HLL T2,UNIGRP(U) ;GET # OF CONSECUTIVE CLUSTERS TRIED FOR ON O/P
HLRZ U,UNISTR(U) ;GET ADR. OF NEXT UNIT DATA BLOCK IN STR
JUMPN U,CHKST4 ;JUMP IF MORE TO DO
SOS STRHGH##(P2) ;MAKE STRHGH BE HIGHEST LOG. BLOCK # IN STR
HLRZ P2,STRSYS##(P2) ;GET NEXT STR DATA BLOCK ADR. WITHIN SYSTEM
JUMPN P2,CHKST1 ;REPEAT IF THERE IS ONE
POPJ P, ;ELSE RETURN
SUBTTL STRUCTURE ROUTINES -- CRESAB - CREATE SAB AND SPT TABLE
CRESAB: SE1ENT ;ENTER SECTION ONE
PUSHJ P,SAVE4## ;SAVE SOME ACS
CRESA1: LDB P1,UNYSIC## ;GET # SATS TO BE IN CORE FOR THIS UNIT
JUMPLE P1,CPOPJ## ;DON'T TRY TO SETUP ANYTHING IF 0 OR -VE
S0PSHJ CMCWPS ;COMPUTE # CLUSTERS & WORDS PER SAT
LDB P3,UNYWPS## ;GET # WORDS PER SAT
MOVN P2,P3 ;MAKE -VE
HRLZS P2 ;SETUP LH. OF PTR. FOR SABSCN
ADDI P3,SABBIT## ;COMPUTE # WORDS FOR EACH SAB BLOCK
MOVEI P4,UNISAB-SABRNG##(U) ;GET LINK TO FIRST SAB BLOCK IN RING
CRESA2: MOVE T2,P3 ;SETUP ARG. FOR CORE GRABBER
PUSHJ P,CORGRS ;GET CORE
MOVEM T1,SABRNG##(P4) ;STORE LINK FROM PREVIOUS TO CURRENT SAB
MOVE P4,T1 ;PREVIOUS SAB _ CURRENT SAB
HRRI P2,SABBIT## ;FILL IN RH. OF AOBJN PTR.
MOVEM P2,SABSCN##(P4) ;STORE IT IN THIS SAB BLOCK
SKIPN UNILOG(U) ;THIS UNIT PART OF A STRUCTURE?
SETZM SABFIR##(P4) ;NO
SOJG P1,CRESA2 ;LOOP IF ANY MORE SATS
MOVE T1,UNISAB(U) ;GET ADR. OF 1ST. SAB BLOCK IN RING
MOVEM T1,SABRNG##(P4) ;MAKE LAST POINT TO FIRST
CRESPT: LDB T2,UNYSPU## ;GET # SATS ON THIS UNIT
ADDI T2,SPTFIR##+1 ;COMPUTE LENGTH OF SPT TABLE
MOVEI P3,(T2) ;SAVE IN P3
PUSHJ P,CORGRS ;GET CORE
MOVEM T1,UNISPT(U) ;STORE ADR. OF SPT TABLE IN UNIT DATA BLOCK
ADDI T1,-1(P3) ;COMPUTE ADR. OF LAST WORD IN SPT TABLE
SETZM (T1) ;ZERO IT TO INDICATE END OF TABLE
POPJ P, ;RETURN
SUBTTL STRUCTURE ROUTINES -- DEFSTR - DEFINE
DEFSTR::AOS BLURBF ;COUNT PASSES THROUGH HERE
PUSHJ P,PRSCON## ;SEE IF WE KNOW WHAT WE'RE DOING
JRST DEFST2 ;LOOKS LIKE IT--LEAVE USER IN PEACE
SKIPE BLURBF ;WAS THIS THE FIRST TIME HERE?
JRST DEFST1 ;NO--GIVE THE USER SOME PEACE
MOVEI T1,INTRO ;INTRODUCTORY TEXT
PUSHJ P,CONOUT## ;PRINT IT
MOVEI T1,REFPRM ;SPECIAL PARAMETER DISCLAIMER
PUSHJ P,CONOUT## ;PRINT IT
DEFST1: MOVEI T1,INIMSG ;HOME BLOCK WARNING
PUSHJ P,CONOUT## ;PRINT IT
DEFST2: PUSHJ P,GETSNM ;GET STRUCTURE NAME AND CREATE STR DB
JUMPE T1,VFCORE ;GO VERIFY INCORE DATA BASE IF NO MORE
PUSHJ P,GETUNM ;GET AND LINK ALL UNITS
JRST DEFST6 ;BRANCH IF NO UNITS SPECIFIED
MOVEI T1,[ASCIZ /Do you want to see the bad regions/]
MOVSI T2,'NO ' ;DEFAULT
PUSHJ P,PRSYNQ## ;PROMPT AND FETCH ANSWER
MOVEM T1,BATFLG ;SAVE FOR LATER
HLRZ U,STRUNI##(P2) ;POINT TO FIRST UNIT IN STRUCTURE
DEFST3: MOVEI T1,1 ;CODE TO REPORT INITIALIZATION
PUSHJ P,INIHOM ;INITIALIZE HOME BLOCKS ON THIS UNIT
MOVEI T1,0 ;CODE FOR OPTIONAL INIT OF BAT BLOCKS
PUSHJ P,GETBAT ;CHECK OUT BAT BLOCKS
PUSHJ P,INIBAT ;NEED TO INITIALIZE BAT BLOCKS
HLRZ U,UNISTR(U) ;GET NEXT UNIT IN STRUCTURE
JUMPN U,DEFST3 ;LOOP BACK FOR MORE
PUSHJ P,CRLFOP## ;START WITH A BLANK LINE
MOVEI T1,[ASCIZ /Parameters for structure /]
PUSHJ P,ICONM## ;PRINT MESSAGE
MOVE T2,STRNAM(P2) ;GET STRUCTURE NAME
PUSHJ P,PRNAME## ;PRINT IT
PUSHJ P,CRLFOP## ;END LINE
PUSHJ P,GETBPC ;GET BLOCKS PER CLUSTER
PUSHJ P,GETPRV ;GET PRIVATE STATUS
PUSHJ P,GETOPP ;GET OWNER PPN
PUSHJ P,GETDSN ;GET DISK-SET NUMBERS
PUSHJ P,GETK4C ;GET K FOR CRASH.SAV
PUSHJ P,GETOVR ;GET OVERDRAW
PUSHJ P,GETGAR ;GET GUARANTEED BLOCKS
PUSHJ P,GETGRP ;GET BLOCKS TO TRY FOR ON OUTPUT
PUSHJ P,GETCNP ;GET BITS PER CLUSTER COUNT
PUSHJ P,GETSSL ;GET SINGLE STRUCTURE SSL INFO
PUSHJ P,GETSDL ;GET SINGLE STRUCTURE SDL INFO
HLRZ U,STRUNI##(P2) ;POINT TO FIRST UNIT IN STRUCTURE
DEFST4: PUSHJ P,CRLFOP## ;START WITH A BLANK LINE
MOVEI T1,[ASCIZ /Parameters for unit /]
PUSHJ P,ICONM## ;PRINT TEXT
MOVE T2,UDBNAM(U) ;GET NAME
PUSHJ P,PRNAME## ;PRINT IT
PUSHJ P,CRLFOP## ;END LINE
PUSHJ P,GETUID ;GET UNIT ID
PUSHJ P,GETSPU ;GET SATS PER UNIT
PUSHJ P,GETSIC ;GET SATS IN CORE
PUSHJ P,GETK4S ;GET K FOR SWAPPING
PUSHJ P,GETSWB ;GET FIRST SWAPPING BLOCK NUMBER
PUSHJ P,GETCFS ;GET CLASS FOR SWAPPING
PUSHJ P,GETASL ;GET SINGLE UNIT ASL INFO
PUSHJ P,REFCHZ ;JUST INCASE HE DEFAULTED EVERYTHING
HLRZ U,UNISTR(U) ;LINK TO NEXT UNIT IN STRUCTURE
JUMPN U,DEFST4 ;LOOP IF MORE
MOVE T1,[PUSHJ P,CRESAB] ;INSTRUCTION TO EXECUTE PER UNIT
PUSHJ P,STOUNI ;TO MAKE THE SAB RINGS FOR THIS STRUCTURE
MOVE T1,STRNAM##(P2) ;GET THE STR NAME
MOVEI T2,[ASCIZ /must be refreshed before it can be used./]
PUSHJ P,SWARN ;MAKE SURE HE KNOWS TO REFRESH IT
DEFST5: PUSHJ P,OTSET## ;RESET OUTPUT BYTE POINTER, ETC.
PUSHJ P,CRLFOP## ;PUT OUT A BLANK LINE
JRST DEFST2 ;LOOP BACK FOR ANOTHER STRUCTURE
DEFST6: HLL T1,STRSYS##(P2) ;GET NEXT STR, IF ANY
HLLM T1,SYSSTR## ;AND MAKE SYSTEM POINT BEYOND US
PUSHJ P,KSTR ;KILL OFF STR DB
JRST DEFST2 ;AND THEN REPROMPT FOR ANOTHER
SUBTTL STRUCTURE ROUTINES -- DELSAB - DELETE SAB AND SPT TABLE
DELSAB: SE1ENT ;ENTER SECTION ONE
PUSHJ P,SAVE1## ;SAVE P1
S0PSHJ CMCWPS ;COMPUTE # CLUSTERS & WORDS PER SAT
SKIPE P1,UNISAB(U) ;HAVE A SAB RING?
LDB P1,UNYSIC## ;GET SATS IN CORE
JUMPLE P1,DELSA2 ;NONE
DELSA1: LDB T1,UNYWPS## ;GET WORDS PER SAT
ADDI T1,SABBIT## ;PLUS OVERHEAD
MOVE T2,UNISAB(U) ;GET A SAB ADDRESS
MOVE T3,SABRNG##(T2) ;LINK TO NEXT
MOVEM T3,UNISAB(U) ;STORE BACK FOR NEXT TIME
IFE FTXMON,<PUSHJ P,GIVWDS##> ;RETURN CORE
IFN FTXMON,<PUSHJ P,GVFWDS##> ;RETURN CORE
SOJG P1,DELSA1 ;LOOP BACK FOR MORE
DELSA2: SETZM UNISAB(U) ;INDICATE NO SABS
DELSPT: SKIPN T2,UNISPT(U) ;GET SPT TABLE ADDRESS
POPJ P, ;NOTHING THERE??
LDB T1,UNYSPU## ;GET # SATS ON THIS UNIT
ADDI T1,SPTFIR##+1 ;COMPUTE LENGTH OF SPT TABLE
IFE FTXMON,<PUSHJ P,GIVWDS##> ;RETURN CORE
IFN FTXMON,<PUSHJ P,GVFWDS##> ;RETURN CORE
SETZM UNISPT(U) ;CLEAR ADDRESS OUT
POPJ P, ;AND RETURN
SUBTTL STRUCTURE ROUTINES -- LNKSTR - LINK UNITS WITHIN A STRUCTURE
LNKSTR: JUMPE P2,CPOPJ## ;IF UNIT NOT IN STR SETUP SAB RING & SPT TABLE
LDB T2,UNYLUN## ;GET LOGICAL UNIT # WITHIN STR
SKIPE HOMNXT##(P1) ;IS THIS LAST UNIT IN STR?
JRST LNKST2 ;NO - GO LINK UNIT DATA BLOCK INTO STR
HRRZ T1,STRUNM##(P2) ;HAVE WE ALREADY SEEN A LAST UNIT FOR THIS STR?
JUMPE T1,LNKST1 ;NO - NOW WE HAVE
PUSH P,T2 ;SAVE LOG. UNIT #
MOVEI T1,[ASCIZ /
% More than one last unit in structure /]
PUSHJ P,MSGSTR ;PRINT MSG FOLLOWED BY SIXBIT STR NAME
POP P,T2 ;RESTORE LOG. UNIT #
LNKST1: ANDI T2,77 ;MAX. OF 64 UNITS IN STR
HRRM T2,STRUNM##(P2) ;STORE LOG. # OF LAST UNIT IN STR
AOS STRUNM##(P2) ;LEAVE T2 ALONE BUT MAKE MEMORY OK
LNKST2: MOVEI T4,STRUNI##(P2) ;GET ADDR OF LINK TO FIRST UDB IN STR
JRST LNKST4
LNKST3: LDB T3,UNYLN1## ;YES - GET LOG. UNIT # OF NEXT UNIT
CAMLE T3,T2 ;IS IT GREATER THAN UNIT JUST READ?
JRST LNKST5 ;YES - INSERT UNIT DATA BLOCK HERE
MOVEI T4,UNISTR(T1) ;GET ADR. OF LINK TO NEXT UNIT
LNKST4: HLRZ T1,(T4) ;GET ADR. OF NEXT UNIT DATA BLOCK IN STR
JUMPN T1,LNKST3 ;MORE DATA BLOCKS?
LNKST5: HRLM T1,UNISTR(U) ;SAVE LINKS TO STR & NEXT UNIT DATA BLOCK
HRRM P2,UNISTR(U) ; IN THIS UNIT DATA BLOCK
HRLM U,(T4) ;SAVE THIS UDB IN PREVIOUS UNIT DATA BLOCK
POPJ P, ;RETURN
SUBTTL STRUCTURE ROUTINES -- SHWSTR - SHOW
SHWSTR::HLRZ P2,SYSSTR## ;GET FIRST STRUCTURE IN SYSTEM
JUMPE P2,[ ;MAKE SURE WE HAVE ONE
MOVEI T1,[ASCIZ /% No structures found/]
AOS (P) ;WRONG, BUT SKIP ANYWAY
PJRST CONOUT] ;AFTER GIVING OUR WARNING
MOVEI T1,[ASCIZ /Structure/]
SETZ T2, ;NO DEFAULT STRUCTURE NAME
PUSHJ P,PRSSIX## ;GET A SIXBIT QUANTITY
JUMPE T1,CPOPJ1## ;GIVE UP IF NO RESPONSE
PUSHJ P,FNSTR ;ALREADY EXIST?
SKIPA ;NO, SEE IF THIS IS ALL
JRST SHWST1 ;YES, TYPE OUT INFO AND LOOP BACK
PUSHJ P,FNDALL ;DID THE USER TYPE ALL?
SKIPA T2,[[ASCIZ /does not exist/]] ;NO
JRST SHWSAL ;SHOW ALL STRUCTURES
PUSHJ P,SWARN ;WARN OPERATOR
JRST SHWSTR ;TRY AGAIN
SHWST1: PUSHJ P,SHWSTU ;SHOW ONE STRUCTURE
JRST SHWSTR ;AND ASK FOR ANOTHER
SHWSAL: HLRZ P2,SYSSTR## ;GET FIRST STRUCTURE IN SYSTEM
SHWSA1: PUSHJ P,SHWSTU ;SHOW A STRUCTURE
HLRZ P2,STRSYS##(P2) ;GET THE NEXT STRUCTURE
JUMPN P2,SHWSA1 ;SHOW THE NEXT STRUCTURE IF MORE.
JRST SHWSTR ;LOOP IN CASE HE WANTS TO SEE ONE AGAIN
SHWSTU: HLRZ U,STRUNI##(P2) ;POINT TO FIRST UNIT IN STRUCTURE
PUSHJ P,CRLFOP## ;START WITH A BLANK LINE
MOVEI T1,[ASCIZ /Parameters for structure /]
PUSHJ P,ICONM## ;PRINT MESSAGE
MOVE T2,STRNAM(P2) ;GET STRUCTURE NAME
PUSHJ P,PRNAME## ;PRINT IT
PUSHJ P,CRLFOP## ;END LINE
MOVEI T1,[ASCIZ / *Blocks per cluster: /]
PUSHJ P,ICONM## ;PRINT TEXT
LDB T1,UNYBPC## ;PICK UP DATA FROM FIRST UNIT IN STR
PUSHJ P,PRTDIG## ;PRINT IT
PUSHJ P,CRLFOP## ;END LINE
MOVEI T1,[ASCIZ / Private structure: /]
PUSHJ P,ICONM## ;PRINT TEXT
LDB T1,STYPVS## ;GET BIT
MOVE T2,[EXP <'NO '>,<'YES '>](T1) ;TRANSLATE
PUSHJ P,PRNAME## ;PRINT VALUE
PUSHJ P,CRLFOP## ;END LINE
MOVEI T1,[ASCIZ / Owner PPN: /]
PUSHJ P,ICONM## ;PRINT TEXT
MOVEI T3,PRNAME## ;ASSUME NOTHING
SKIPN T2,STRPPN##(P2) ;GET PPN
SKIPA T2,['NONE '] ;THERE ISN'T ONE
SKIPA T3,[IFIW PRTPPN##] ;PPN TYPER
MOVE T3,[IFIW PRNAME##] ;SIXBIT TYPER
PUSHJ P,(T3) ;CALL SUBR
PUSHJ P,CRLFOP## ;END LINE
MOVEI T1,[ASCIZ / Disk-set: /]
PUSHJ P,ICONM## ;PRINT TEXT
LDB T1,STYSET## ;GET DISK-SET
SETZ T2, ;ASSUME NO KEYWORD
MOVE T3,[IFIW PRTDIG##] ;ASSUME A SINGLE SET
CAIN T1,0 ;ALL?
MOVSI T2,'ALL' ;YES
CAIN T1,^D37 ;NONE?
MOVE T2,['NONE '] ;YES
SKIPE T2 ;SINGLE DISK-SET?
HRRI T3,PRNAME## ;NO
PUSHJ P,(T3) ;PRINT SOMETHING
PUSHJ P,CRLFOP## ;END LINE
MOVEI T1,[ASCIZ / *Number of K for CRASH.EXE: /]
PUSHJ P,ICONM## ;PRINT TEXT
HRRZ T1,STRK4C##(P2) ;GET K FOR CRASH.SAV
PUSHJ P,PRTDIG## ;PRINT IT
PUSHJ P,CRLFOP## ;END LINE
MOVEI T1,[ASCIZ / Blocks allowed for overdraw per user: /]
PUSHJ P,ICONM## ;PRINT TEXT
MOVM T1,STROVR##(P2) ;GET OVERDRAW
PUSHJ P,PRTDIG## ;PRINT IT
PUSHJ P,CRLFOP## ;END LINE
JRST SHWST2 ;UNIMPLEMENTED
MOVEI T1,[ASCIZ / Sum of blocks guaranteed to users: /]
PUSHJ P,ICONM## ;PRINT TEXT
MOVE T1,STRGAR##(P2) ;GET GUARANTEED BLOCKS
PUSHJ P,PRTDIG## ;PRINT IT
PUSHJ P,CRLFOP## ;END LINE
SHWST2: MOVEI T1,[ASCIZ / Consecutive blocks tried for on output: /]
PUSHJ P,ICONM## ;PRINT TEXT
HLRZ T1,UNIGRP(U) ;GET SIZE FROM FIRST UNIT
PUSHJ P,PRTDIG## ;PRINT IT
PUSHJ P,CRLFOP## ;END LINE
MOVEI T1,[ASCIZ / *Bits per cluster count: /]
PUSHJ P,ICONM## ;PRINT TEXT
LDB T1,[POINT 6,STYCNP##(P2),11] ;GET NUMBER OF BITS
PUSHJ P,PRTDIG## ;PRINT IT
PUSHJ P,CRLFOP## ;END LINE
MOVEI T1,[ASCIZ / Position in the SSL: /]
PUSHJ P,ICONM## ;PRINT TEXT
SKIPGE T1,STRSRC##(P2) ;IN THE SSL?
SKIPA T2,['NONE '] ;NO
SKIPA T3,[IFIW PRTDIG##] ;IF A POSITION
MOVE T3,[IFIW PRNAME##] ;IF NONE
PUSHJ P,(T3) ;PRINT SOMETHING
PUSHJ P,CRLFOP## ;END LINE
MOVEI T1,[ASCIZ / Unit in the SDL: /]
PUSHJ P,ICONM## ;PRINT TEXT
SKIPGE STRSDL##(P2) ;IN THE SDL?
TDZA T1,T1 ;NO
MOVEI T1,1 ;YES
MOVE T2,[EXP <'NO '>,<'YES '>](T1) ;TRANSLATE
PUSHJ P,PRNAME## ;PRINT VALUE
PUSHJ P,CRLFOP## ;END LINE
MOVEI T1,[ASCIZ / Unit/]
PUSHJ P,ICONM## ;PRINT TEXT
HRRZ T2,STRUNM##(P2) ;GET # UNITS IN STR
MOVEI T1,[ASCIZ /s/] ;POSSIBLE TEXT
CAIE T2,1 ;IF MULTI-PACK STRUCTURE,
PUSHJ P,CONMES## ;MAKE IT PLURAL
MOVEI T1,[ASCIZ /: /]
PUSHJ P,CONMES## ;SEPARATION
SHWST3: MOVE T2,UDBNAM(U) ;GET THE PHYSICAL UNIT NAME
PUSHJ P,PRNAME## ;TYPE IT
HLRZ U,UNISTR(U) ;GET NEXT UNIT IN THIS STR
JUMPE U,SHWST4 ;END LIST IF NO MORE
MOVEI T1,[ASCIZ /, /] ;SEPARATION IF MORE
PUSHJ P,CONMES## ;TYPE COMMA SPACE
JRST SHWST3 ;THEN NEXT UNIT NAME
SHWST4: PUSHJ P,CRLFOP## ;END THE LINE
POPJ P, ;RETURN
SUBTTL STRUCTURE ROUTINES -- VALMFD - VALIDATE THE MFD
VALMFD: PUSHJ P,SAVE2## ;SAVE P1 AND P2
SKIPN UNILOG(U) ;SKIP IF UNIT IS IN A FILE STRUCTURE
POPJ P, ;NOT IN A FILE STRUCTURE
HRRZ P2,UNISTR(U) ;ADDR OF STR DATA BLOCK
JUMPE P2,CPOPJ## ;UNILOG WAS BOGUS
HLLZ T1,STRREF##(P2) ;NEEDS REFRESHING FLAG
JUMPN T1,CPOPJ## ;NO MFD IF NEEDS REFRESHING
HRRZ P1,@ONCMBF ;ADDR FROM IOWD PTR TO HOME BLOCK
ADDI P1,1
LDB T2,UNYLUN## ;LOGICAL UNIT IN FILE STRUCTURE
CAME T2,HOMUN1##(P1) ;SKIP IF MFD STARTS ON THIS UNIT
POPJ P, ;IT DOESN'T
IMUL T2,STRBPU##(P2) ;T2=1ST LOGICAL BLOCK ON THIS UNIT
SUB T2,HOMMFD##(P1) ;MINUS BLOCK FOR MFD RIB
MOVNS T2 ;T2=BLOCK ON UNIT FOR MFD RIB
PUSHJ P,OMNRED ;READ MFD RIB
STOPCD LNKSTR,DEBUG,ERM,DIEUNI##, ;++ERROR READING MFD
SKIPE .UONCE## ;IF USER-MODE,
POPJ P, ;WE DON'T CARE (AND TWICE.BIN COULD SCREW US)
HRRZ T1,P1 ;ADDR OF 1ST WORD OF MFD RIB
ADD T1,(P1) ;PTR TO 1ST RETRIEVAL PTR
SKIPE 2(T1) ;SKIP IF ONLY 1 PTR
POPJ P, ;DONE
MOVEI T1,STP1PT## ;ONLY 1 PTR BIT
IORM T1,STR1PT##(P2) ;SAVE
POPJ P, ;RETURN
SUBTTL STRUCTURE ROUTINES -- DSKSDL - BUILD SDL FROM DISK
DSKSDL: MOVSI T1,-^D36 ;AOBJN POINTER
MOVEI T2,SYSSTR##-STRSYS## ;PREDECESSOR OF FIRST STR
JRST DSKSD2 ;ENTER LOOP FROM THE BOTTOM
DSKSD1: SKIPGE STRSDL(T2) ;IN THE SDL?
JRST DSKSD2 ;NO
HRRZM T1,STRSDL(T2) ;SET POSITION IN THE SDL
AOBJP T1,CPOPJ## ;RETURN IF ALL FILLED UP
DSKSD2: HLRZ T2,STRSYS(T2) ;LINK TO NEXT STR
JUMPN T2,DSKSD1 ;LOOP BACK FOR ANOTHER
POPJ P, ;DONE
SUBTTL MANDATORY ONCE ONLY CODE -- FILMAN - SETUP FILSER DATA BASE
FILMAN::SETOM BATMAN ;NOTE IN MANDANTORY PART NOW
PUSHJ P,REDBAT ;READ BAT BLOCKS TO SET UP SWAPPING SATS
MOVEI P2,SYSSTR##-STRSYS## ;PREDECESSOR TO FIRST STR
JRST LSTRT1 ;ENTER LOOP FROM THE BOTTOM
NXTSIS: SETZB P4,STRTAL##(P2) ;CLEAR FREE BLOCK TALLY & LAST RET. PTR. FLAG
HLRZ U,STRUNI##(P2) ;GET ADR. OF 1ST. UNIT IN STR
PUSHJ P,GTSRB ;READ SAT.SYS "RIB" BLOCK FOR THIS STR
JRST [MOVE T1,UDBNAM##(U)
MOVEI T2,[ASCIZ /SAT read errors/]
PUSHJ P,UWARN ;WARN OPERATOR
JRST NXTSIE] ;AND CONTINUE
HRRZ T1,P1 ;GET ADR. OF "RIB" BLOCK IN CORE
ADD T1,RIBFIR##(P1) ;CREATE AOBJN PTR. FOR SCANNING RET. INFO.
AOBJN T1,.+2 ;SKIP OVER 1ST. PTR. AS IT IS A "RIB"
STOPCD NXTSIE,DEBUG,NRS,DIEUNI##, ;++NO RIB IN SAT
HRRZ P2,UNISTR(U) ;GET ADR. OF STR - P2 CLOBBERED BY GTSRB
IFN FTXMON,SE1JRS ;MUST BE EXECUTED IN SECTION 1
NXTUIS: SETZM UNITAL(U) ;CLEAR FREE BLOCK TALLY FOR THIS UNIT
PUSH P,T1 ;SAVE PTR.
LDB T3,UNYLUN## ;GET LOG. UNIT # OF THIS UNIT IN STR
SKIPN T3 ;IF THIS UNIT IS LOG. UNIT # 0
SKIPA T2,-1(T1) ; SKIP BACK OVER "RIB" TO GET NEW UNIT PTR.
MOVE T2,(T1) ;GET NEW UNIT PTR.
TRNN T2,RIPNUB## ;IS IT REALLY A NEW UNIT PTR?
STOPCD NXTSI1,DEBUG,NNU,DIEUNI##, ;++NOT NEW UNIT
ANDI T2,77 ;IT SHOULD BE LOG. UNIT # SO MASK OUT EXTRA BITS
CAME T2,T3 ;IS IT?
STOPCD NXTSI1,DEBUG,RPM,DIEUNI##, ;++RET. PTR. MISMATCH
MOVE T4,UNISPT(U) ;GET ADR. OF UNIT'S SPT TABLE
MOVPTR: AOBJP T1,MOVPT2 ;HAVE WE RUN OUT OF RET. INFO?
MOVE T2,(T1) ;NO - GET NEXT WORD
LDB T3,STYCNP##(P2) ;GET CLUSTER COUNT
JUMPE T3,MOVPT1 ;IF 0 WE MUST HAVE RUN OUT OF PTRS. FOR THIS UNIT
LDB T2,STYCLP##(P2) ;GET CLUSTER ADR.
DPB T2,SPYCLA## ;STORE IN SPT TABLE FOR THIS UNIT
AOJA T4,MOVPTR ;BUMP SPT TABLE ADR. & RETURN FOR MORE PTRS.
NXTSI1: POP P,T1 ;RESTORE PTR. TO RET. INFO FROM STACK.
NXTSIE: MOVEI T2,1 ;GET A BIT
DPB T2,UNYAWL## ;SET SOFTWARE WRITE PROTECT FOR ALL JOBS
NXTSI2: HRRZ P2,UNISTR(U) ;RESET P2 TO POINT TO STR
JRST LSTRT1 ;AND GO ON TO NEXT STR
MOVPT1: MOVEM T1,(P) ;SAVE PTR. ON STACK FOR NEXT UNIT SCAN
JUMPN T2,MOVPT3 ;WAS IT 0 ENTRY INDICATING END OF LIST?
MOVPT2: SUBI T4,1 ;YES - DECREMENT T4 SO THAT LAST ENTRY IN SPT TABLE,
; WHICH IS A "RIB", GETS CLEARED
SETOM P4 ;YES - SET END OF LIST FLAG
MOVPT3: SETZM (T4) ;ZERO END OF SPT TABLE FOR THIS UNIT
;NOW READ ALL SATS ON THIS UNIT - COMPUTE THE # OF FREE CLUSTERS LEFT IN EACH SAT
PUSH P,P2 ;SAVE ADR. OF THIS STR
LDB P1,UNYSPU## ;GET # SAT BLOCKS ON THIS UNIT
MOVNS P1 ;MAKE -VE
HRLZS P1 ;MAKE IT INTO AN AOBJN PTR.
MOVEI P2,UNISAB-SABRNG##(U) ;SETUP OFFSET TO POINT TO 1ST. SAB BLOCK ADR.
NXTSAT: MOVE P2,SABRNG##(P2) ;GET ADR. OF NEXT SAB BLOCK FOR THIS UNIT
MOVE T4,UNISPT(U) ;GET ADR. OF SPT TABLE
ADDI T4,(P1) ;ADD IN INDEX FOR LDB SPYCLA
LDB T1,SPYCLA## ;GET CLUSTER ADR. OF THIS SAT BLOCK
LDB T2,UNYBPC## ;GET # BLOCKS PER CLUSTER
IMUL T2,T1 ;COMPUTE LOGICAL BLOCK # FOR THIS SAT
PUSHJ P,REDSAT ;READ SAT & COMPUTE # FREE CLUSTERS LEFT IN IT
STOPCD LSTRT0,DEBUG,SRE,DIEUNI##, ;++SAT READ ERROR
MOVE T4,UNISPT(U) ;GET ADR. OF SPT TABLE FOR THIS UNIT
ADDI T4,(P1) ;ADD IN INDEX FOR DPB SPYTAL
DPB T2,SPYTAL## ;STORE FREE CLUSTERS FOR SAT BLOCK IN SPT TABLE
LDB T1,UNYBPC## ;GET # BLOCKS PER CLUSTER FOR THIS UNIT
IMUL T1,T2 ;COMPUTE # FREE BLOCKS IN THIS SAT BLOCK
HRRZ T2,UNISTR(U) ;LOC OF STR DATA BLOCK
HLLZ T3,STRREF##(T2)
JUMPE T3,NXTSA1 ;IF STR NEEDS REFRESHING,
MOVEI T3,1 ; PRETEND IT'S WRITE-LOCKED
DPB T3,UNYAWL##
JRST NXTSA2 ; AND LEAVE UNITAL=STRTAL=0
NXTSA1: ADDM T1,UNITAL(U) ;ADD TO TOTAL FOR THIS UNIT
ADDM T1,STRTAL##(T2) ;ADD TO TOTAL FOR THIS STR
NXTSA2: AOBJN P1,NXTSAT ;GO READ NEXT SAT IF THERE IS ONE
MOVE T2,UNIBPU(U) ;GET NO OF BLOCK ON UNIT
LDB T3,UNYK4S## ;K FOR SWAPPING
LSH T3,BLKSPK ;CONVERT TO BLOCKS
SUB T2,T3 ;COMPUTE SAFETY FACTOR
IDIVI T2,UNVRSF## ; BLOCKS TO USE WHEN UNIT FULL
CAILE T2,^D500 ;MAX SAFETY FACTOR = 500 BLOCKS
MOVEI T2,^D500
MOVNS T2
ADDM T2,UNITAL(U) ;SUBTRACT FACTOR FROM UNIT
HRRZ T1,UNISTR(U)
ADDM T2,STRTAL##(T1) ; AND FROM STR
POP P,P2 ;POP OFF ADR. OF THIS STR DATA BLOCK FROM STACK
POP P,T1 ;RESTORE PTR. TO RET. INFO. FROM STACK
HLRZ U,UNISTR(U) ;GET ADR. OF NEXT UNIT DATA BLOCK IN STR
JUMPL P4,LSTRTP ;HAS LAST RET. PTR. BEEN SEEN?
JUMPN U,NXTUIS ;NO - IS THERE ANOTHER UNIT IN THIS STR TO CHECK
STOPCD .,STOP,ROU,DIESTR##, ;++RAN OUT OF UNITS
LSTRTP: SKIPE U ;IS THERE ANOTHER UNIT IN THIS STR TO CHECK
STOPCD .,STOP,TMU,DIESTR##, ;++TOO MANY UNITS
JRST LSTRT1 ;ALREADY RESTORED T1 AND P2
LSTRT0: MOVEI T1,1 ;SET SOFTWARE WRITE PROTECT FOR ALL JOBS
DPB T1,UNYAWL##
POP P,P2 ;POP OFF ADR. OF THIS STR. DATA BLOCK FROM STACK
POP P,T1 ;RESTORE PTR. TO RE. INFO FROM STACK
LSTRT1:
IFN FTXMON,<XJRST [MCSEC0+.+1]> ;RETURN TO SECTION ZERO
HLRZ P2,STRSYS##(P2) ;GET ADR. OF NEXT STR DATA BLOCK IN SYSTEM
JUMPN P2,NXTSIS ;IF THERE IS ONE REPEAT
PUSH P,P2 ;INIT TEMP PTR TO SYS. SL.
MOVE P2,SYSSRC##
MOVEM P2,TEMPTR
PUSHJ P,SLINI## ;AND EMPTY THE SYS SL.
POP P,P2
MOVE P4,[PUSHJ P,DEPCLR] ;SETUP INSTR. FOR XCT IN FNDSRC
PUSHJ P,FNDSRC ;GO SETUP "SYS" SEARCH LIST
PUSHJ P,SSLBLD## ;LOAD THE SSL INTO THE BOOTSTRAP VECTOR
JFCL ;NOT AVAILABLE
PUSHJ P,ASLBLD## ;LOAD THE ASL INTO THE BOOTSTRAP VECTOR
JFCL ;NOT AVAILABLE
PUSHJ P,SDLBLD## ;LOAD THE SDL INTO THE BOOTSTRAP VECTOR
JFCL ;NOT AVAILABLE
MOVEI P1,SYSSTR##-STRSYS## ;SETUP LINK POINTING TO 1ST. STR IN SYSTEM
JRST ADJSR1
ADJSTR: SETZM STRMNT##(P1) ;CLEAR MOUNT COUNT(TIMESHARED AS STRSAT)
SETZM STRJOB##(P1) ;CLEAR SINGLE ACCESS OWNER(TIMESHARED AS STRSRC)
ADJSR1: HLRZ P1,STRSYS##(P1) ;GET ADR. OF NEXT STR IN SYSTEM
JUMPN P1,ADJSTR ;REPEAT IF ANY MORE STRS
HLRZ U,SYSUNI## ;GET ADR. OF 1ST UNIT DATA BLOCK IN SYSTEM
ADJUNI: HRRZ T2,UNISTR(U) ;GET STR ADR. THIS UNIT IS IN
JUMPE T2,ADJUN1 ;IS IT 0?
IFN FTDUAL,<
SKIPE T2,UNI2ND(U) ;DRIVE DUAL PORTED?
PUSHJ P,CPYUD## ;COPY INFORMATION TO SECOND PORT
>; END IFN FTDUAL
ADJUN1: HLRZ U,UNISYS(U) ;GET ADR. OF NEXT UNIT DATA BLOCK IN SYSTEM
JUMPN U,ADJUNI ;REPEAT IF ANY LEFT
SWPFAC: PUSHJ P,GVMNB0 ;RETURN MONITOR BUFFER USED FOR "RIB" BLOCK
PUSHJ P,TYPNMU ;TYPE UNITS IN STRUCTURES NOT MOUNTED TO THIS SYS
;CALCULATE DATA NEEDED FOR THE MCU FUNCTION.
;SET PROT AND PROT0 ACCORDING TO THE FIRST UNIT
;IN THE ACTIVE SWAPPING LIST USING THE AVERAGE TIME PER PAGE
;FOR PROT AND THE AVERAGE LATENCY TIME FOR PROT0
MOVEI P1,BKPMAX ;LAST ENTRY IN UNIT TYPE TABLES
SWPFC1: MOVEI T1,PAGSIZ ;GET WORDS PER PAGE
LSH T1,-7 ;CONVERT TO BLOCKS PER PAGE (128 WORDS PER BLOCK)
IMUL T1,MSPREV(P1) ;MULTIPLY BY MICROSECS PER REVOLUTION
IDIV T1,BKPREV(P1) ;DIVIDE BY BLOCKS PER REVOLUTION TO
;GET MICROSECS PER PAGE
MOVEM T1,MCUATP##(P1) ;SAVE IN TABLE FOR MCU CALCULATION
MOVE T1,AVSEEK(P1) ;GET AVG SEEK TIME IN MICROSECS
LSH T1,1 ;*2
ADD T1,MSPREV(P1) ;ADD IN MICROSECS PER REV
LSH T1,-1 ;/2 TO GET AVERAGE LATENCY
MOVEM T1,MCUALT##(P1) ;IN MICROSECS. SAVE FOR MCU.
SOJGE P1,SWPFC1 ;LOOP FOR ALL TYPES OF UNIT.
;NOW CALCULATE DEFAULT PROT AND PROT0 WHICH WILL BE USED
;IN THE ABSENCE OF THE MINIMUM CORE USAGE FUNCTION.
MOVSI T3,MSWPMX## ;AOBJN POINTER TO SWPTAB
SKIPN U,SWPTAB##(T3) ;GET FIRST NON-ZERO ENTRY
AOBJN T3,.-1
LDB T1,UNYKTP## ;GET KONTROLLER TYPE
MOVE T1,TYPTAB##(T1) ;GET OFFSET INTO UNIT TYPE TABLES
LDB P1,UNYUTP## ;GET UNIT TYPE
ADD P1,T1 ;GET FINAL POSITION IN UNIT TYPE TABLES
MOVE T1,PRT0TB(P1) ;GET PROT0 FOR THIS DEVICE
MOVEM T1,PROT0## ;(MICRO SECONDS)
IMUL T1,TICSEC## ;TICS PER SECOND
IDIV T1,[^D1000000] ;CONVERT PROT0 TO TICKS
MOVEM T1,PROT1## ;AND SAVE AS TICS VERSION OF PROT0
MOVE T1,PROTTB(P1) ;GET MULTIPLIER FOR THIS DEVICE
MOVEM T1,PROT## ;(MICRO SECONDS)
MOVE T1,PRTMTB(P1) ;GET MAXIMUM FOR THIS DEVICE
MOVEM T1,PROTM## ;(MICRO SECONDS)
IFN FTNSCHED,<
MOVE T1,MCUATP##(P1) ;AVG TIME PER PAGE IN MICROSEC.
IMULI T1,PAVJSP## ;PREDICTED AVG JOB SIZE IN PAGES
ADD T1,MCUALT##(P1) ;PLUS AVG LATENCY IN MICROSEC.
IMUL T1,TICSEC## ;MICROTICS
IDIV T1,[^D1000000] ;CONVERT TO TICS
ADDI T1,1 ;ROUND UP TO NEXT TIC
MOVEM T1,SCDSWP## ;CYCLE TIME FOR PQ2 SWAPIN SCAN
>
; NOW SET QUANTUM TABLES
MOVE T1,MAXTAB(P1) ;GET MAXIMUM PQ2 QUANTUM RUN TIME
IMUL T1,TICSEC ;CONVERT TO TICKS
IDIV T1,[^D1000000]
MOVEM T1,QMXTAB##+1
MOVE T1,ADDTAB(P1) ;GET MINIMUM PQ2 QUANTUM RUN TIME
IMUL T1,TICSEC ;CONVERT TO TICKS
IDIV T1,[^D1000000]
MOVEM T1,QADTAB##+1
MOVE T1,MULTAB(P1) ;GET PQ2 QUANTUM RUN TIME MULTIPLIER
IMUL T1,TICSEC ;CONVERT TO TICKS
IDIV T1,[^D1000000]
MOVEM T1,QMLTAB##+1 ;AND AS PQ2 MULTIPLIER
;PQ1 QUANTA ARE INITIALIZED IN COMMON.
;INSERT ANY NON-STANDARD CODE FOR
;INITIALIZING PQ1 QUANTA HERE.
MOVEI T1,STRSYS##
HRRM T1,SYSSTR##
MOVSI T1,MSWPMX## ;CAN'T HAVE SWAP SPACE
MOVNI T2,4 ; START AT BLOCK0,
SKIPE T3,SWPTAB##(T1) ; SO DECREMENT UNISLB
ADDM T2,UNISLB(T3) ; AND START AT LOGICAL
AOBJN T1,.-2 ; SWAP BLOCK1
POPJ P, ;FINALLY DONE
;BLOCKS PER REVOLUTION TABLE
BKPREV: 0 ;NEW DRUM
0 ;DITTO
^D20 ;RD10
^D30 ;RM10B
^D5 ;RP01
^D10 ;RP02
^D10 ;RP03
^D11 ;DUAL POSITIONER MD10
^D11 ;SINGLE POSITIONER MD10
^D32 ;RS04
^D20 ;RP04
^D20 ;RP06
^D30 ;RM03
^D30 ;RP07
^D25 ;RP20
^D23 ;RA80
^D23 ;RA81
^D19 ;RA60
BKPMAX==.-BKPREV-1 ;MAXIMUM INDEX TO THESE TABLES
;MICROSECONDS PER REVOLUTION TABLE
MSPREV: 0 ;NEW DRUM
0 ;DITTO
^D33000 ;RD10
^D17000 ;RM10B
^D25000 ;RP01
^D25000 ;RP02
^D25000 ;RP03
^D50000 ;DUAL POSITIONER MD10
^D50000 ;SINGLE POSITIONER MD10
^D17000 ;RS04
^D17000 ;RP04
^D17000 ;RP06
^D17000 ;RM03
^D17000 ;RP07
^D17000 ;RP20
^D17000 ;RA80
^D17000 ;RA81
^D17000 ;RA60
AVSEEK: 0 ;NEW DRUM
0 ;DITTO
0 ;RD10
0 ;RM10B
^D50000 ;RP01
^D50000 ;RP02
^D50000 ;RP03
^D110000 ;DUAL POSITIONER MD10
^D110000 ;SINGLE POSITIONER MD10
0 ;RS04
^D27000 ;RP04
^D27000 ;RP06
^D27000 ;RM03
^D23000 ;RP07
^D25000 ;RP20
0 ;RA80
0 ;RA81
0 ;RA60
TEMPTR: 0 ;ACTUAL PTR. USED
;TABLE OF MINIMUM IN-CORE-PROTECT TIMES FOR VARIOUS DEVICES (PROT0)
PRT0TB: ^D3000000 ;NEW DRUM - UNKNOWN
^D3000000 ;DITTO
^D3000000 ;RD10
^D1500000 ;RM10B
^D7000000 ;RP01
^D5000000 ;RP02
^D5000000 ;RP03
^D8000000 ;DUAL POSITIONER MD10
^D8000000 ;SINGLE POSITIONER MD10
^D1500000 ;RS04
^D2000000 ;RP04
^D2000000 ;RP06
^D2000000 ;RM03
^D2000000 ;RP07
^D2000000 ;RP20
^D2000000 ;RA80
^D2000000 ;RA81
^D2000000 ;RA60
;TABLE OF IN-CORE-PROTECT TIME MULTIPLIERS BY DEVICE (PROT)
PROTTB: 0 ;NEW DRUM - UNKNOWN
0 ;DITTO
0 ;RD10
0 ;RM10B
0 ;RP01
0 ;RP02
0 ;RP03
0 ;DUAL POSITIONER MD10
0 ;SINGLE POSITIONER MD10
0 ;RS04
0 ;RP04
0 ;RP06
0 ;RM03
0 ;RP07
0 ;RP20
0 ;RA80
0 ;RA81
0 ;RA60
;TABLE OF MAXIMUM IN-CORE-PROTCT TIMES FOR VARIOUS DEVICES (PROTM)
PRTMTB: ^D3000000 ;NEW DRUM - UNKNOWN
^D3000000 ;DITTO
^D3000000 ;RD10
^D1500000 ;RM10B
^D7000000 ;RP01
^D5000000 ;RP02
^D5000000 ;RP03
^D8000000 ;DUAL POSITIONER MD10
^D8000000 ;SINGLE POSITIONER MD10
^D1500000 ;RS04
^D2000000 ;RP04
^D2000000 ;RP06
^D2000000 ;RM03
^D2000000 ;RP07
^D2000000 ;RP20
^D2000000 ;RA80
^D2000000 ;RA81
^D2000000 ;RA60
;TABLE OF MINIMUM PQ2 IN QUEUE TIMES BY DEVICE (QADTAB+1)
ADDTAB: ^D3000000/4 ;NEW DRUM - UNKNOWN
^D3000000/4 ;DITTO
^D3000000/4 ;RD10
^D1500000/4 ;RM10B
^D7000000/4 ;RP01
^D5000000/4 ;RP02
^D5000000/4 ;RP03
^D8000000/4 ;DUAL POSITIONER MD10
^D8000000/4 ;SINGLE POSITIONER MD10
^D1500000/4 ;RS04
^D2000000/4 ;RP04
^D2000000/4 ;RP06
^D2000000/4 ;RM03
^D2000000/4 ;RP07
^D2000000/4 ;RP20
^D2000000/4 ;RA80
^D2000000/4 ;RA81
^D2000000/4 ;RA60
;TABLE OF PQ2 MULTIPLIERS FOR IN QUEUE TIME BY DEVICE (QMLTAB+1)
MULTAB: ^D3000000/4 ;NEW DRUM - UNKNOWN
^D3000000/4 ;DITTO
^D3000000/4 ;RD10
^D1500000/4 ;RM10B
^D7000000/4 ;RP01
^D5000000/4 ;RP02
^D5000000/4 ;RP03
^D8000000/4 ;DUAL POSITIONER MD10
^D8000000/4 ;SINGLE POSITIONER MD10
^D1500000/4 ;RS04
^D2000000/4 ;RP04
^D2000000/4 ;RP06
^D2000000/4 ;RM03
^D2000000/4 ;RP07
^D2000000/4 ;RP20
^D2000000/4 ;RA80
^D2000000/4 ;RA81
^D2000000/4 ;RA60
;TABLE OF MAXIMUM PQ2 IN QUEUE TIMES BY DEVICE (QMXTAB+1)
MAXTAB: ^D3000000/2 ;NEW DRUM - UNKNOWN
^D3000000/2 ;DITTO
^D3000000/2 ;RD10
^D1500000/2 ;RM10B
^D7000000/2 ;RP01
^D5000000/2 ;RP02
^D5000000/2 ;RP03
^D8000000/2 ;DUAL POSITIONER MD10
^D8000000/2 ;SINGLE POSITIONER MD10
^D1500000/2 ;RS04
^D2000000/2 ;RP04
^D2000000/2 ;RP06
^D2000000/2 ;RM03
^D2000000/2 ;RP07
^D2000000/2 ;RP20
^D2000000/2 ;RA80
^D2000000/2 ;RA81
^D2000000/2 ;RA60
SUBTTL MANDATORY ONCE ONLY CODE -- GOHOME - REWRITE HOME BLOCKS
GOHOME::PUSHJ P,GTMNB1 ;GET A MONITOR BUFFER
HLRZ U,SYSUNI## ;POINT TO FIRST UNIT IN SYSTEM
PUSH P,[EXP 0] ;INIT COUNTER
GOHOM1: MOVSI T1,UNPHWP!UNPOFL ;BITS TO TEST
MOVSI T2,UNPCHG ;AND MORE
TDNN T1,UNIDES(U) ;HARDWARE WRITE PROTECT OR OFFLINE?
TDNN T2,UNIDES(U) ;PARAMETERS CHANGE?
JRST GOHOM2 ;IGNORE THIS UNIT
PUSHJ P,HOMWRT ;REWRITE THE HOME BLOCKS
AOS (P) ;INDICATE DISK WAS WRITTEN
GOHOM2: MOVEI T3,UNVNPM ;NO-PACK-MOUNTED STATE
MOVSI T1,UNPNMU ;NOT-OUR-DISK-SET FLAG
TDNE T1,UNIDES(U) ;IS IT ON?
DPB T3,UNYUST## ;YES--MAKE IT USEABLE
MOVSI T1,UNPTSB ;GET TIMESHARED BIT(S) IN UNIDES
ANDCAM T1,UNIDES(U) ;CLEAR THEM OUT
IFN FTDUAL,<
LDB T3,UNYUST## ;GET STATE TO PROPAGATE
SKIPE T2,UNI2ND(U) ;ALTERNATE PORT?
ANDCAM T1,UNIDES(T2) ;CLEAR THEM HERE TOO
EXCH T2,U ;SWAP FOR BYTE POINTERS
SKIPE U ;IF A SECOND PORT,
DPB T3,UNYUST## ;PROPAGATE PACK STATE
EXCH T2,U ;SWAP BACK
>; END IFN FTDUAL
HLRZ U,UNISYS(U)
JUMPN U,GOHOM1 ;UNITS ARE LEFT-GO FOR MORE
POP P,T1 ;GET FLAG BACK
JUMPE T1,GOHOM3 ;NO MESSAGE IF NOTHING HAPPENED
MOVEI T1,[ASCIZ /[HOME blocks updated]/]
PUSHJ P,CONOUT## ;PRINT MESSAGE
GOHOM3: PUSHJ P,GTODDB ;GET ONCE-ONLY DDB ADDRESS
SETZ T1, ;FIND FIRST STRUCTURE TO REFRESH
PUSHJ P,RFIND ;...
SKIPA ;NOTHING TO REFRESH
PUSHJ P,.REFRE ;REFRESH SOMETHING
JFCL ;IGNORE ERRORS
POPJ P, ;RETURN
SUBTTL MANDATORY ONCE ONLY CODE -- KONCE - KILL OFF ONCE-ONLY DATA BASE
KONCE:: PUSHJ P,SAVE2## ;SAVE P1 AND P2
PUSH P,U ;SAVE U
HLRZ U,SYSUNI## ;POINT TO START OF UNITS
KONCE1: PUSHJ P,KUNIT ;KILL OFF UNIT-RELATED PARAMETERS
HLRZ U,UNISYS(U) ;LINK TO NEXT UNIT
JUMPN U,KONCE1 ;LOOP FOR ALL UNITS
MOVE P1,STRAOB## ;AOBJN POINTER TO STRUCTURE TABLE
KONCE2: SKIPE P2,TABSTR##(P1) ;GET A STR DB
PUSHJ P,KSTR ;KILL IT OFF
AOBJN P1,KONCE2 ;LOOP FOR ALL STRUCTURES
POP P,U ;RESTORE U
POPJ P, ;RETURN
KSTR: MOVEI T1,STRLEN## ;STR DB LENGTH
MOVE T2,P2 ;STR DB ADDRESS
PUSH P,STRFSN##(P2) ;SAVE OUR FSN
PUSHJ P,GIVWDS## ;RELEASE CORE
POP P,T1 ;RESTORE THE FSN
HRRZS T1 ;ISOLATE FSN
SETZM TABSTR##(T1) ;CLEAR TABSTR ENTRY
POPJ P, ;RETURN
KUNIT: SETZM UNIHID(U) ;CLEAR OUT LOGICAL UNIT NAME
SETZM UNILOG(U) ;CLEAR OUT NAME OF LOGICAL UNIT WITHIN STR
SETZM UNISTR(U) ;CLEAR OUT LINKS TO STR
HRRZS UNIGRP(U) ;CLEAR CLUSTERS TRIED FOR ON O/P
SETOM UNISUN(U) ;SAY NOT IN ASL
PUSHJ P,DELSAB ;DELETE SAB RING AND SPT TABLE
MOVEI T1,0 ;GET A ZERO
DPB T1,UNYBPC## ;CLEAR BLOCKS PER CLUSTER
DPB T1,UNYSIC## ;CLEAR SATS IN CORE
DPB T1,UNYSPU## ;CLEAR SATS PER UNIT
PUSHJ P,DELSST ;DELETE SWAPPING SATS
MOVSI T1,UNPNMU ;WRONG-DISK-SET FLAG
ANDCAM T1,UNIDES(U) ;CLEAR IT UNTIL NEXT TIME WE SET IT
POPJ P, ;RETURN
SUBTTL UNIT ROUTINES -- CHGUNI - CHANGE
CHGUNI::AOSE BLURBF ;OPERATOR SEEN THIS TEXT BEFORE?
JRST CHGUN1 ;YES--SKIP IT
PUSHJ P,PRSCON## ;DOES HE KNOW WHAT HE'S DOING?
JRST CHGUN1 ;MAYBE--GIVE HIM A BREAK
MOVEI T1,INTRO ;POINT TO INTRODUCTORY TEXT
PUSHJ P,CONOUT## ;PRINT IT
MOVEI T1,REFPRM ;SPECIAL PARAMETER DISCLAIMER
PUSHJ P,CONOUT## ;PRINT IT
CHGUN1: MOVEI T1,[ASCIZ /Unit to change/]
SETZ T2, ;NO DEFAULT
PUSHJ P,PRSSIX## ;PROMPT AND FETCH ANSWER
JUMPE T1,VFCORE ;GO VERIFY INCORE DATA BASE IF NO MORE
HLRZ U,SYSUNI## ;GET FIRST UNIT DATA BLOCK IN SYSTEM
CHGUN2: CAME T1,UNIHID(U) ;MATCH ON UNIT ID
CAMN T1,UDBNAM(U) ; OR DRIVE NAME
JRST CHGUN3 ;FOUND IT
HLRZ U,UNISYS(U) ;LINK TO NEXT UNIT IN SYSTEM
JUMPN U,CHGUN2 ;LOOP BACK AND TRY AGAIN
MOVEI T2,[ASCIZ /does not exist/]
PUSHJ P,UWARN ;WARN OPERATOR
JRST CHGUNI ;AND TRY AGAIN
CHGUN3: PUSHJ P,CKUSTR ;MAKE SURE WE ASK ABOUT MOUNTED UNITS
JRST CHGUNI ;HE ABORTED THIS ONE
HRRZ P2,UNISTR##(U) ;LOAD UP THE STR POINTER, IF ANY
MOVEI T1,[ASCIZ /Do you want to see the BAT blocks/]
MOVSI T2,'NO ' ;DEFAULT
PUSHJ P,PRSYNQ## ;PROMPT AND FETCH ANSWER
MOVEM T1,BATFLG ;SAVE FOR LATER USE
MOVEI T1,[ASCIZ /Parameters for unit /]
PUSHJ P,ICONM## ;PRINT TEXT
MOVE T2,UDBNAM(U) ;GET NAME
PUSHJ P,PRNAME## ;PRINT IT
PUSHJ P,CRLFOP## ;END LINE
PUSHJ P,GETUID ;GET UNIT ID
PUSHJ P,GETSPU ;GET SATS PER UNIT
PUSHJ P,GETSIC ;GET SATS IN CORE
PUSHJ P,GETK4S ;GET K FOR SWAPPING
PUSHJ P,GETSWB ;GET FIRST SWAPPING BLOCK NUMBER
PUSHJ P,GETCFS ;GET CLASS FOR SWAPPING
PUSHJ P,GETASL ;GET SINGLE UNIT ASL INFO
SKIPN BATFLG ;DO WE WANT TO SEE THE BAT BLOCKS?
JRST CHGUN4 ;NO--SKIP THIS
MOVEI T1,0 ;YES--GET FLAG FOR OPTIONAL INIT OF BAD BLOCKS
PUSHJ P,GETBAT ;CHECK AND DISPLAY THE BAF
PUSHJ P,INIBAT ;INITIALIZE IF NEEDED
CHGUN4: JRST CHGUNI ;LOOP BACK FOR ANOTHER UNIT
SUBTTL UNIT ROUTINES -- ONCBND - BIND CI UNITS
;ROUTINE CALLED BEFORE READING HOM BLOCKS TO BIND UNATTACHED UNITS.
;CALL:
; PUSHJ P,ONCBND
;RETURN:
; CPOPJ ALWAYS
IFN FTCIDSK,<
ONCBND::SKIPE [M.RAX##] ;SKIP IF RAXKON NOT INCLUDED
SKIPE BNDFLG## ;ALREADY BEEN HERE?
POPJ P, ;YES
PUSHJ P,SAVT## ;SAVE ACS
MOVEI T1,[SE1ENT ;LOAD ROUTINE TO EXECUTE
SKIPN T2,.CPPCB##-.CPCDB##(P1) ;GET PCB ADDRESS
POPJ P, ;NONE, RETURN
MOVE T2,.PCSTS(T2) ;GET STATUS FLAGS
TLNN T2,(ST.DED) ;IS THE KLIPA DEAD?
SETO T3, ;NO, REMEMBER WE HAD A RUNNING ONE
POPJ P,]
SETZ T3, ;START AFRESH
PUSHJ P,CPUAPP## ;DOES ANY CPU HAVE A KLIPA WHICH IS RUNNING?
JUMPE T3,CPOPJ## ;IF NOT, DON'T BOTHER WAITING
MOVEI T1,[ASCIZ /
[Initializing CI network] /] ;GET MESSAGE
PUSHJ P,ICONM## ;TELL THE OPERATOR
PUSHJ P,OPOUT## ;FORCE OUTPUT
MOVE T1,BNDTIM ;HOW MANY SECONDS TO WAIT
IMUL T1,TICSEC## ;CONVERT TO TICKS
ADD T1,BNDBEG ;FIND OUT WHEN THE WAIT IS OVER
ONCBN1: CAMLE T1,APRTIM## ;HAVE WE WAITED LONG ENOUGH?
JRST [REPEAT 4,<IMULI P,1> ;STALL
JRST ONCBN1] ;CHECK AGAIN
MOVEI T1,[ASCIZ /
/]
PUSHJ P,ICONM## ;START THE MESSAGE
PUSHJ P,OPOUT## ;FLUSH THE OUTPUT
ONCBN2: SETOM BNDFLG## ;WE'RE READY TO BIND THE UNITS NOW
; SO FUTURE ONLINES SHOULD BIND THEMSELVES
MOVEI J,KDBTAB##+.TYDSK-KDBNXT ;SET UP INITIAL LINK
ONCBN3: SKIPN J,KDBNXT(J) ;GET NEXT KDB ADDRESS
POPJ P, ;RETURN WHEN DONE
LDB T1,KOYKTP## ;GET KONTROLLER TYPE
CAIE T1,TYPRA ;CI DISK?
JRST ONCBN3 ;NO, SKIP IT
SETZB P1,ONLFLG ;START WITH CPU0, SET END PACKET FLAGS TO ZERO
ONCBN4: MOVEI P2,1 ;GET A BIT
LSH P2,(P1) ;POSITION FOR CPUN
TDNN P2,KDBCAM(J) ;CAN THIS CPU ACCESS THIS KONTROLLER?
JRST ONCBN8 ;NO, ON TO NEXT CPU
HLRE P3,KDBIUN(J) ;GET -VE NUMBER OF UNITS
SETCA P3,P3 ;START WITH HIGHEST UNIT
ONCBN5: SKIPN U,@KONPTR(J) ;GET A UDB ADDRESS
JRST ONCBN7 ;NOT FOR THIS UNIT NUMBER
HRRZ T1,UNIALT(U) ;SEE IF ALTERNATE PORT ALREADY ATTACHED
JUMPE T1,ONCBN6 ;JUMP IF NO ALTERNATE
MOVEI T2,CPUMSK ;MASK FOR ALL CPU BITS
TDNE T2,UDBCAM(T1) ;ANY CPU HAVE ALTERNATE PORT ATTACHED?
JRST ONCBN7 ;YES, DON'T BIND THIS UNIT
MOVE T1,UDBKDB(T1) ;ALTERNATE KDB
MOVE T1,KONBSY(T1) ;HAVE WE ALREADY PROCESSED ALTERNATE KDB?
TLNE T1,KOPBND
JRST ONCBN6 ;YES, BIND UNIT HERE AS WILL NOT BE BOUND ELSEWHERE
LDB T1,KOYKNM## ;GET KONTROLLER NUMBER
LDB T2,UNYKOF## ;GET KONTAB OFFSET
XOR T1,T2 ;TRY TO BIND HALF OF THE UNITS ON EACH KDB
TRNE T1,1 ;...
JRST ONCBN7 ;LET ALTERNATE KDB TACKLE THIS ONE
ONCBN6: TDNE P2,UDBCAM(U) ;IS THIS UNIT ALREADY BOUND ON THIS CPU?
JRST ONCBN7 ;YES
PUSH P,U ;SAVE UDB ADDRESS
HRRZ U,UNIALT(U) ;ALTERNATE UNIT
SKIPE U ;IF AN ALTERNATE,
PUSHJ P,DETUDB## ; REMOVE FROM UNISYS CHAIN, PUT ON SYSDET CHAIN
POP P,U ;RESTORE UDB ADDRESS
MOVE T1,P1 ;COPY CPU NUMBER
XCTCPU (CPN,ONCONL) ;BIND THE UNIT
PUSHJ P,BNDERR ;ERROR, PRINT SOMETHING
ONCBN7: SOJGE P3,ONCBN5 ;LOOP FOR ALL UNITS
ONCBN8: CAIGE P1,M.CPU##-1 ;DONE THEM ALL?
AOJA P1,ONCBN4 ;NO, LOOP FOR OTHER CPUS
MOVSI T1,KOPBND ;GET A BIT TO TEST
IORM T1,KONBSY(J) ;SHOW WE'VE PROCESSED THIS KDB
JRST ONCBN3 ;BACK TO NEXT KONTROLLER
;HERE IF ONLINE FAILED
BNDERR: PUSHJ P,PRSSET## ;SET UP SPECIAL BUFFER, .CPTOA, ETC.
PUSH P,T1 ;SAVE OLD CHARACTER TYPER
MOVEI T1,[ASCIZ /online failed/]
PUSHJ P,CONMES## ;STORE TEXT
IFN FTMP,<
MOVEI T1,[ASCIZ / via CPU/]
PUSHJ P,CONMES## ;MORE
MOVEI T3,"0"(P1) ;GET CPU NUMBER
PUSHJ P,COMTYO## ;PRINT DIGIT
>; END IFN FTMP
POP P,.CPTOA## ;RESTORE CHARACTER STICKER
MOVE T1,UDBNAM(U) ;GET DRIVE NAME
MOVEI T2,TXTBUF## ;POINT TO GENERATED TEXT
PJRST UWARN ;WARN OPERATOR AND RETURN
BNDBEG::BLOCK 1 ;TIME STAMP
BNDTIM: M.BNDT## ;SECS TO WAIT FOR CI NETWORK TO SETTLE
>; END IFN FTCIDSK
SUBTTL UNIT ROUTINES -- SHWUNI - SHOW
SHWUNI::HLRZ U,SYSUNI## ;FIND FIRST UNIT IN SYSTEM
JUMPE U,[ ;JUMP IF NONE
MOVEI T1,[ASCIZ /% No units found/]
AOS (P) ;SKIP ANYWAY
PJRST CONOUT] ;GIVE WARNING AND RETURN
MOVEI T1,[ASCIZ /Unit/]
SETZ T2, ;NO DEFAULT STRUCTURE NAME
PUSHJ P,PRSSIX## ;GET A SIXBIT QUANTITY
JUMPE T1,CPOPJ1## ;GIVE UP IF NO RESPONSE
HLRZ U,SYSUNI## ;FIRST UNIT IN SYSTEM
PUSHJ P,FNDALL ;DID THE USER ASK FOR ALL?
JRST SHWUN2 ;NO, GO FIND THE UNIT
SHWUN1: PUSHJ P,SHWUNT ;SHOW A UNIT
HLRZ U,UNISYS(U) ;GET THE NEXT UNIT
JUMPN U,SHWUN1 ;LOOP IF MORE
JRST SHWUNI ;LOOP IN CASE HE WANTS TO SEE ONE AGAIN
SHWUN2: CAME T1,UDBNAM(U) ;DRIVE NAME?
CAMN T1,UNIHID(U) ; OR UNIT ID?
JRST SHWUN3 ;YES
HLRZ U,UNISYS(U) ;LINK TO NEXT
JUMPN U,SHWUN2 ;KEEP SEARCHING
MOVEI T2,[ASCIZ /does not exist/]
PUSHJ P,UWARN ;WARN OPERATOR
JRST SHWUNI ;TRY AGAIN
SHWUN3: PUSHJ P,SHWUNT ;SHOW THE UNIT
MOVSI T1,UNPNMU ;WRONG-DISK-SET FLAG
TDNE T1,UNIDES(U) ;CHECK IT
JRST SHWUN4 ;CAN'T DO THIS IF SO
MOVEI T1,[ASCIZ /Do you want to see the bad regions/]
MOVSI T2,'NO ' ;DEFAULT
PUSHJ P,PRSYNQ## ;PROMPT AND FETCH ANSWER
JUMPE T1,SHWUN4 ;NO--SKIP THIS
MOVEM T1,BATFLG ;SAVE FOR LATER
MOVEI T1,1 ;CODE FOR NO OPERATOR OPTION
PUSHJ P,GETBAT ;CHECK OUT BAT BLOCKS
JFCL ;IGNORE ERRORS
SHWUN4: JRST SHWUNI ;AND LOOP FOR MORE
SHWUNT: PUSHJ P,CRLFOP## ;START WITH A BLANK LINE
MOVEI T1,[ASCIZ /Parameters for unit /]
PUSHJ P,ICONM## ;PRINT TEXT
MOVE T2,UDBNAM(U) ;GET NAME
PUSHJ P,PRNAME## ;PRINT IT
PUSHJ P,CRLFOP## ;END LINE
MOVEI T1,[ASCIZ / Unit ID: /]
PUSHJ P,ICONM## ;PRINT IT
MOVE T2,UNIHID(U) ;GET ID
PUSHJ P,PRNAME## ;PRINT IT
PUSHJ P,CRLFOP## ;END LINE
MOVEI T1,[ASCIZ / *K for swapping: /]
PUSHJ P,ICONM## ;PRINT TEXT
LDB T1,UNYK4S## ;GET K FOR SWAPPING
PUSHJ P,PRTDIG## ;PRINT IT
PUSHJ P,CRLFOP## ;END LINE
LDB T1,UNYK4S## ;GET K FOR SWAPPING
JUMPE T1,SHWUT1 ;NO SWAPPING STUFF IF NO SPACE ALLOCATED
MOVEI T1,[ASCIZ / *First logical block for swapping: /]
PUSHJ P,ICONM## ;PRINT TEXT
MOVE T1,UNISLB(U) ;GET VALUE
PUSHJ P,PRTDIG## ;PRINT IT
PUSHJ P,CRLFOP## ;END LINE
MOVEI T1,[ASCIZ / Swapping class: /]
PUSHJ P,ICONM## ;PRINT TEXT
LDB T1,UNYCFS## ;GET CLASS
PUSHJ P,PRTDIG## ;PRINT IT
PUSHJ P,CRLFOP## ;END LINE
SHWUT1: MOVEI T1,[ASCIZ / *SAT blocks per unit: /]
PUSHJ P,ICONM## ;PRINT TEXT
LDB T1,UNYSPU## ;GET SATS PER UNIT
PUSHJ P,PRTDIG## ;PRINT IT
PUSHJ P,CRLFOP## ;END LINE
MOVEI T1,[ASCIZ / SAT blocks in core: /]
PUSHJ P,ICONM## ;PRINT TEXT
LDB T1,UNYSIC## ;GET SATS IN CORE
PUSHJ P,PRTDIG## ;PRINT IT
PUSHJ P,CRLFOP## ;END LINE
MOVEI T1,[ASCIZ / Unit in the ASL: /]
PUSHJ P,ICONM## ;PRINT TEXT
SKIPGE UNISUN(U) ;IN THE ASL?
TDZA T1,T1 ;NO
MOVEI T1,1 ;YES
MOVE T2,[EXP <'NO '>,<'YES '>](T1) ;TRANSLATE
PUSHJ P,PRNAME## ;PRINT VALUE
PUSHJ P,CRLFOP## ;END LINE
HRRZ T1,UNISTR(U) ;GET UPWARD POINTER TO STRUCTURE
JUMPE T1,SHWUT2 ;NOT IN A STR
MOVEI T1,[ASCIZ / Unit in structure /]
PUSHJ P,ICONM## ;PRINT TEXT
HRRZ T2,UNISTR(U) ;GET STR POINTER
MOVE T2,STRNAM##(T2) ;AND ITS NAME
PUSHJ P,PRNAME## ;PRINT IT
PUSHJ P,CRLFOP## ;END LINE
SHWUT2: MOVSI T1,UNPNMU ;WRONG-DISK-SET BIT
TDNN T1,UNIDES(U) ;IS IT SET?
JRST SHWUT3 ;NO--DON'T SAY IT IS
MOVEI T1,[ASCIZ / Unit in a disk set not mounted to this system/]
PUSHJ P,CONOUT## ;DUMP THE MESSAGE
SHWUT3: POPJ P, ;RETURN
FNDALL: TRNE T1,-1 ;DOES RESPONSE HAVE MORE THAN 3 CHARACTERS?
POPJ P, ;YES, THEN IT'S NOT ALL, RETURN
REPEAT 0,<
MOVE T2,[SIXBIT /ALL/] ;SET UP AC FOR COMPARE
TLNE T1,77 ;DO WE HAVE THREE CHARACTERS EXACTLY?
JRST FNDAL1 ;YES
TLNE T1,7777 ;DO WE HAVE TWO OR ONE?
TLZA T2,77 ;TWO, MASK COMPARE AC
TLZ T2,7777 ;JUST ONE, FIX COMPARE AC
FNDAL1: CAMN T1,T2 ;DID THE USER ASK FOR ALL?
> ;END OF REPEAT 0
CAMN T1,[SIXBIT /ALL/] ;DID THE USER ASK FOR ALL?
AOS (P) ;YES, SKIP RETURN
POPJ P, ;RETURN
SUBTTL VOLUME ID PROCESSING -- CHKVSY - CHECK ID
;SUBROUTINE TO CHECK VOLUME ID TYPE
;CALL WITH:
; P1 = ADDRESS OF HOME BLOCK
; PUSHJ P,CHKVSY
; RETURN HERE IF VOLUME ID TYPE IS 'TOPS-10'
; RETURN HERE IF VOLUME ID TYPE IS NOT 'TOPS-10', WITH
; T1 = BYTE POINTER TO VOLUME ID TYPE STRING IN ASCIZ
CHKVSY: PUSHJ P,SAVE2## ;SAVE P1-P2
MOVEI P1,HOMVSY## ;OFFSET TO VOLUME ID
LSH P1,2 ;MAKE BYTE ADDRESS
MOVE T3,[POINT 7,VSYBFR] ;POINTER TO TEMP BUFFER
MOVEI T4,3*4 ;3 WORDS OF 4 BYTES EACH
CHKVS1: MOVE T1,P1 ;T1 IS BYTE ADDRESS
PUSHJ P,VOLIDP ;GET POINTER
ADD T1,-2(P) ;ADD ADDRESS OF BUFFER
LDB T2,T1 ;GET THE BYTE
SKIPN T2 ;IF NULL,
MOVEI T2," " ; MAKE A BLANK
IDPB T2,T3 ;STUFF IN TEMP BUFFER
CAIE T2," " ;NON-BLANK?
MOVE P2,T3 ;YES, SAVE POINTER TO END OF SYSTEM TYPE
SOSLE T4 ;QUIT IF DONE
AOJA P1,CHKVS1 ;LOOP FOR MORE
DMOVE T1,VSYBFR ;GET DECODED SYSTEM TYPE
MOVE T3,VSYBFR+2 ;3 WORDS WORTH
CAMN T1,[ASCII .TOPS-.] ;IS IT 'TOPS-10'?
CAME T2,[ASCII .10 .] ;...
JRST CHKVS2 ;NO
CAMN T3,[ASCII . .] ;LAST WORD HAVE 2 BLANKS?
POPJ P, ;YES, SYSTEM TYPE IS VALID
CHKVS2: AOS (P) ;SET FOR SKIP RETURN
CAMN T1,[ASCII . .] ;NULL SYSTEM TYPE?
CAME T2,[ASCII . .] ;...
JRST CHKVS3 ;NO
CAMN T3,[ASCII . .] ;LAST WORD HAVE 2 BLANKS?
SKIPA T1,[[ASCIZ /unknown/]] ;GENERIC TEXT
CHKVS3: MOVEI T1,VSYBFR ;ADDRESS OF DECODED SYSTEM TYPE TEXT
SETZ T2, ;GET A ZERO
IDPB T2,P2 ;TERMINATE SYSTEM TYPE AS ASCIZ
POPJ P, ;RETURN
;BUFFER TO EXTRACT SYSTEM TYPE FIELD FROM VOLUME ID BLOCK
VSYBFR: BLOCK 3 ;12 CHARACTERS OF SYSTEM TYPE
SUBTTL VOLUME ID PROCESSING -- VOLIDN - STORE ONE SIXBIT WORD
;SUBROUTINE TO STORE 1 SIXBIT WORD IN VOLUME ID
;CALL WITH:
; T1 = BYTE # WITHIN HOME BLOCK (PDP-11 WISE)
; T2 = WORD
; P1 = ADDRESS OF HOME BLOCK
; PUSHJ P,VOLIDN
; RETURN HERE
;
VOLIDN: PUSHJ P,SAVE1## ;SAVE P1
PUSH P,T1
MOVEI P1,-1(T1) ;SETUP ADDRESS
MOVEI T4,6 ;BYTE COUNT
VOLDN1: MOVEI T3,0 ;CLEAR WORD
ROTC T2,6 ;COPY BYTE
ADDI T3,"0"-'0' ;CONVERT TO ASCII
AOS T1,P1 ;T1 IS BYTE ADDRESS
PUSHJ P,VOLIDP ;GET POINTER
ADD T1,-2(P) ;ADD ADDRESS OF BUFFER
DPB T3,T1 ;STORE IN BUFFER
SOJG T4,VOLDN1 ;LOOP OVER WHOLE WORD
JRST TPOPJ## ;RETURN
SUBTTL VOLUME ID PROCESSING -- VOLIDP - COMPUTE BYTE POINTERS
;SUBROUTINE TO COMPUTE BYTE POINTER TO BYTE IN VOLID PART
;CALL WITH:
; T1 = BYTE NUMBER WITHIN HOME BLOCK
; PUSHJ P,VOLIDP
; RETURN HERE WITH POINTER IN T1
;
VOLIDP: PUSH P,T2
IDIVI T1,4 ;T1=WORD #, T2=BYTE #
ADD T1,VOLPTT(T2) ;GET CORRECT POINTER
JRST T2POPJ## ;RETURN
VOLPTT: POINT 7,0,17 ;BYTE 0
POINT 7,0,9 ;BYTE 1
POINT 7,0,35 ;BYTE 2
POINT 7,0,27 ;BYTE 3
SUBTTL VOLUME ID PROCESSING -- VOLPPN - GENERATE A PPN
; SUBROUTINE TO GENERATE A PPN
; CALL: PUSHJ P,VOLPPN
; RETURN HERE WITH T1&T2 CONTAINING PPN STRING IN SIXBIT
;
VOLPPN: PUSHJ P,SAVE2## ;SAVE P1 AND P2
SETZB T1,T2 ;CLEAR RESULT
MOVE P2,[POINT 6,T1] ;BYTE POINTER TO STORE RESULT
MOVEI T3,'[' ;GET A BRACKET
PUSHJ P,VOLCHR ;STORE IT
HLRZ T3,HOMOPP##(P1) ;GET PROJECT #
CAIN T3,777777 ;WILD?
JRST [MOVEI T3,'*' ;YES
PUSHJ P,VOLCHR ;TYPE *
JRST .+2] ;ONWARD
PUSHJ P,VOLOCT ;CONVERT IT
MOVEI T3,',' ;GET A COMMA
PUSHJ P,VOLCHR ;STORE IT
HRRZ T3,HOMOPP##(P1) ;GET PROGRAMMER #
CAIN T3,777777 ;WILD?
JRST [MOVEI T3,'*' ;YES
PUSHJ P,VOLCHR ;TYPE *
JRST .+2] ;ONWARD
PUSHJ P,VOLOCT ;CONVERT IT
MOVEI T3,']' ;GET A BRACKET
PJRST VOLCHR ;STORE IT AND RETURN
VOLOCT: IDIVI T3,10 ;DIVIDE BY RADIX
PUSH P,T4 ;SAVE REMAINDER
SKIPE T3 ;DONE?
PUSHJ P,VOLOCT ;NO - RECURSE
POP P,T3 ;GET CHARACTER
ADDI T3,'0' ;MAKE IT SIXBIT
VOLCHR: TRNN T2,77 ;12 CHARACTERS MAXIMUM
IDPB T3,P2 ;STORE CHARACTER
POPJ P, ;RETURN
SUBTTL VOLUME ID PROCESSING -- WRTVID - WRITE VOLUME ID FIELDS
;SUBROUTINE TO SETUP VOLUME ID FIELDS IN HOME BLOCK
;CALL WITH:
; P1 = ADDRESS OF HOME BLOCK
; PUSHJ P,WRTVID
; RETURN HERE
;
WRTVID: MOVEI T1,HOMVID## ;GET OFFSET TO VOLUME ID
LSH T1,2 ;MAKE BYTE ADDRESS
MOVE T2,HOMHID##(P1) ;GET PACK NAME
PUSHJ P,VOLIDN ;STORE IN BLOCK
ADDI T1,6 ;SKIP AHEAD
MOVEI T2,0 ;BLANKS
PUSHJ P,VOLIDN ;STORE IN BLOCK
MOVEI T1,HOMVSY## ;GET SYSTEM TYPE
LSH T1,2 ;CONVERT TO BYTES
MOVE T2,[SIXBIT "TOPS-1"]
PUSHJ P,VOLIDN ;STORE IN BLOCK
ADDI T1,6 ;BUMP 1 1/2 WORDS
MOVSI T2,'0 ' ;ADD IN ZERO
PUSHJ P,VOLIDN ;STORE NAME
DMOVE T1,[EXP <SIXBIT/SYSTEM/>,0] ;ASSUME NO OWNER PPN
SKIPE HOMOPP##(P1) ;IS THERE AN OWNER
PUSHJ P,VOLPPN ;YES -GENERATE PPN
EXCH T1,T2 ;SWAP WORDS
PUSH P,T1 ;SAVE SECOND WORD
MOVEI T1,HOMOWN##
LSH T1,2
PUSHJ P,VOLIDN
ADDI T1,6
POP P,T2 ;GET SECOND WORD BACK
PJRST VOLIDN
;START OF VERIFY CODE
VFCORE::SETZM SERIUS ;INIT SERIOUS ERROR FLAG
SETZM BATMAN ;ASSUME OPTIONAL FOR VENDING BAT BLOCKS
PUSHJ P,CHKSTR ;MAKE SURE ALL STRS HAVE ALL NECESSARY UNITS
PUSHJ P,BOOTDB## ;IF DEBUGGING, HACK UP THE SSL/SDL/ASL
PUSHJ P,BLDSSL## ;BUILD SYSTEM SEARCH LIST FROM PRESERVED COPY
PUSHJ P,DSKSSL ;USE THE DISK DATA BASE
PUSHJ P,BLDASL## ;BUILD ACTIVE SWAPPING LIST FROM PRESERVED COPY
JFCL ;IGNORE ERRORS
PUSHJ P,DSKASL ;USE THE DISK DATA BASE
PUSHJ P,BLDSDL## ;BUILD SYSTEM DUMP LIST FROM PRESERVED COPY
PUSHJ P,DSKSDL ;USE THE DISK DATA BASE
MOVE T1,SERIUS ;GET SERIOUS ERROR COUNT
IOR T1,ERRHOM ;AND HOME BLOCK ERROR COUNT
SKIPN T1 ;ANY ERRORS?
AOS (P) ;NO - SKIP RETURN
POPJ P, ;RETURN
SUBTTL SUBROUTINES
;SUBROUTINE TO READ A SAT BLOCK & COUNT THE # OF FREE CLUTERS IN IT
REDSAT:
IFN FTXMON,<
SE1JRS ;MAKE THE SAB RING ADDRESSABLE
MOVEI T1,(MS.SAT) ;WHERE TO READ THE DATA
HRRM T1,DEVISN(F) ;STORE SECTION NUMBER FOR MAPIO
>
HLLZ T1,SABSCN##(P2) ;GET -VE LENGTH OF THIS SAT BLOCK
ADDI T1,-1+SABBIT##(P2) ;MAKE AN IOWD PTR. FOR MONRED
IFN FTXMON,<
JRST @[0,,.+1] ;OMNRED CAN'T HACK IT IN SECTION 1
>
PUSH P,@ONCMBF ;PRESERVE CURRENT MON. BUFFER ADR.
MOVEM T1,@ONCMBF ;STORE NEW IOWD FOR SAT BLOCK
PUSHJ P,OMNRED ;GO READ IN "SAT" BLOCK
JRST REDST1 ;ERROR WHILE READING SAT BLOCK - NON SKIP RETURN
AOS T1,@ONCMBF ;MAKE IOWD BACK INTO AN AOBJN PTR.
PUSH P,R ;SAVE R
IFN FTXMON,<
SE1JRS ;BACK TO SECTION 1
MOVSI R,(MS.SAT) ;DATA SECTION
>
IFE FTXMON,<
SETZ R,
>
PUSHJ P,SATCN## ;COUNT 0 BITS IN SAT BLOCK
POP P,R ;RESTORE R
HRRZM T2,SABTAL##(P2) ;STORE FREE CLUSTERS IN THIS SAT
SETOM SABHOL##(P2) ;DONT KNOW SIZE OF LARGEST HOLE
HRRZS T2 ;CLEAR OUT LH
MOVSI T1,SAPDOB## ;CLEAR SAT BAD & SAT IN CORE DIFFERENT FROM ON DISK
ANDCAM T1,SABFIR##(P2)
DPB P1,SAZNDX## ;STORE SAT BLOCK INDEX # IN IN SAB BLOCK
HRRZ T1,UNICPS(U) ;GET # CLUSTERS PER SAT FOR THIS UNIT
IMULI T1,(P1) ;TIMES SAT BLOCK INDEX
DPB T1,SAYCLA##
AOS -1(P) ;SKIP RETURN
REDST1:
IFN FTXMON,<
HLLZS DEVISN(F) ;I/O IS NOW TO SECTION ZERO
>
POP P,@ONCMBF ;RESTORE ORIGINAL MON BUFFER ADR.
POPJ P, ;RETURN
;SUBROUTINE TO READ THE "RIB" BLOCK FOR SAT.SYS
GTSRB: MOVE P4,STRSAT##(P2) ;GET LOG. BLOCK #'S OF 1ST. & 2ND. "RIB" BLOCKS
MOVE P3,[EXP CODRIB##] ;GET CODE WORD FOR "RIB" BLOCKS
MOVSI P2,(SIXBIT .SAT.)
PJRST REDRUN ;READ & VERIFY "RIB" BLOCKS
;SUBROUTINE TO GET ONCE-ONLY DDB
GTODDB: PUSH P,T1
PUSH P,T2
MOVEI T1,DDBLEN## ;WORDS REQUIRED
SKIPN T2,ONCDDB ;ALREADY HAVE DDB?
PUSHJ P,INICOR## ;ALLOCATE CORE
MOVEM T2,ONCDDB ;SAVE ADDRESS
MOVE F,T2 ;SET UP F
JRST TTPOPJ## ;RESTORE ACS AND RETURN
;SUBROUTINE TO RETURN ONCE-ONLY DDB
GVODDB: MOVEI T1,DDBLEN## ;LENGTH
SKIPE T2,ONCDDB ;FETCH ADDRESS
PUSHJ P,GIVWDS## ;GIVE BACK CORE
SETZM ONCDDB ;ZAP ADDRESS
POPJ P, ;RETURN
;SUBROUTINE TO GIVE THE MONITOR BUFFER TO A DDB
;RETURNS AN IOWD FOR THE MON BUF IN .UPMBF
GTMNB1: MOVE T1,[MBLKSZ##,,MONBUF-1]
MOVEM T1,@ONCMBF
POPJ P,
;SUBROUTINE TO RETURN THE MONITOR BUFFER
GVMNB0: SETZM @ONCMBF
POPJ P,
;SUBROUTINE TO MOVE PARAMETERS FROM "HOME" BLOCK TO UNIT DATA BLOCK
MOVUNI: MOVE T1,HOMLOG##(P1)
MOVEM T1,UNILOG(U)
MOVE T1,HOMHID##(P1)
MOVEM T1,UNIHID(U)
MOVE T1,HOMSID##(P1)
MOVEM T1,UNISID(U)
MOVE T1,HOMLUN##(P1)
DPB T1,UNYLUN##
SKIPLE T1,HOMHOM##(P1)
MOVEM T1,UNIHOM(U)
MOVE T1,HOMGRP##(P1)
HRLM T1,UNIGRP(U)
MOVE T1,HOMBPC##(P1)
DPB T1,UNYBPC##
MOVE T1,HOMSUN##(P1)
MOVEM T1,UNISUN(U)
MOVE T1,HOMSLB##(P1)
MOVEM T1,UNISLB(U)
MOVE T1,HOMK4S##(P1)
DPB T1,UNYK4S##
MOVE T1,HOMCFS##(P1)
DPB T1,UNYCFS##
MOVE T1,HOMSIC##(P1)
DPB T1,UNYSIC##
MOVE T1,HOMSPU##(P1)
DPB T1,UNYSPU##
MOVSI T2,UNPMSB
ANDCAM T2,UNIDES(U)
CAIE T1,1
IORM T2,UNIDES(U)
POPJ P,
;SUBROUTINE TO FIND AN STR DATA BLOCK GIVEN A SIXBIT NAME
; ENTER WITH T1 = SIXBIT STR NAME TO BE SEARCHED FOR
; IF NO STR DATA BLOCK FOUND - RETURN WITH:
; P2 = 0. P3 = LAST STR DATA BLOCK ADR.(DIFSTR IF NO STRS)
; IF FOUND - SKIP RETURN WITH:
; P2 = ADR. OF THE STR DATA BLOCK. P4= SYSTEM STR # OF THIS STR
; P3 = ADR. OF PREVIOUS STR DATA BLOCK (OR DIFSTR IF THE ONLY STR)
; IN BOTH CASES THE LEADING 4 SIXBIT CHS. IN T1 ARE RESPECTED
FNSTR:: TRZ T1,7777 ;STR NAMES CAN BE NO LONGER THAN 4 CHS.
MOVE P4,STRAOB## ;POINT AT FIRST ENTRY IN STR TABLE
FNSTR1: SKIPE P2,TABSTR##(P4) ;SKIP IF AN UNUSED SLOT
CAME T1,STRNAM##(P2) ;SKIP IF USED SLOT MATCHES
AOBJN P4,FNSTR1 ;LOOP IF EMPTY SLOT OR SLOT DOESN'T MATCH
JUMPL P4,FNSTR2 ;BRANCH AHEAD IF WE FIND A MATCHING STR
SETZ P2, ;MAKE SURE P2 RETURNS A ZERO IF WE FAIL
POPJ P, ;GIVE NONSKIP RETURN IF WE FAIL
;HERE IF WE FIND IT. SCAN LIST IN FORWARD DIRECTION FOR PREDECESSOR
FNSTR2: HRRZS P4 ;RETURN FSN ONLY
MOVEI P3,DIFSTR## ;SET (SYSSTR-STRSYS) AS 1ST PREDECESSOR
FNSTR3: HLRZ T2,STRSYS(P3) ;LOOK AT POSSIBLE PREDECESSOR SUCCESOR
CAIN T2,(P2) ;SKIP IF HIS SUECCESOR IS NOT US
JRST CPOPJ1## ;EXIT WITH P2=STR, P3=PRED, P4=FSN
MOVE P3,T2 ;STEP TO NEXT PREDECESSOR
JUMPN P3,FNSTR3 ;LOOP IF THERE IS ANOTHER STR IN THE LIST
SETZ P2, ;WE CAN'T GET HERE, BUT FORGET MATCH IF WE DO
POPJ P, ;...AND GIVE ERROR RETURN
;SUBROUTINE TO CREATE AN STR DATA BLOCK IN UPPER CORE & ZERO IT OUT
; P2 IS RETURNED WITH ADR. OF THIS STR DATA BLOCK
GETSTR: MOVE P4,STRAOB## ;GET AOBJN POINTER INTO TABSTR
SKIPE TABSTR##(P4) ;SKIP IF WE FOUND A FREE FSN
AOBJN P4,.-1 ;LOOP UNTIL WE FIND A FREE FSN, OR WE RUN OUT
JUMPGE P4,CPOPJ## ;PASS ALONG ERROR IF NO FREE FSNS
MOVEI T2,STRLEN## ;GET SIZE OF STR DATA BLOCK
PUSHJ P,CORGRB ;GET CORE FOR STR DATA BLOCK
HRRZ P2,T1 ;GET ADR. OF NEW STR INTO A KOSHER AC
HRLI T1,STRDB## ;PUT AD. OF PROTOTYPE STR DATA BLOCK IN RH
BLT T1,-1(T2) ;ZERO IT (T2 SET TO LAST LOC. +1 BY CORGRB)
MOVEM P2,TABSTR(P4) ;STORE ADR. OF STR IN TABLE BY ITS LOG. #
HRRM P4,STRFSN##(P2) ;INSERT FSN# INTO THE NEW STR DB
SETOM STRSRC##(P2) ;NOT IN SSL YET
HLRZ T1,SYSSTR## ;GET 1ST STR IN SYSTEM FROM BEFORE THIS ONE
HRLM T1,STRSYS##(P2) ;NOW MAKE US POINT AT THAT OLD ONE
HRLM P2,SYSSTR## ;AND POINT THE SYSTEM AT US
JRST CPOPJ1## ;PASS ALONG GOOD RETURN
;SUBROUTINE TO GRAB CORE FOR THE ONCE ONLY CODE
; ENTER WITH T2 = # WORDS TO GRAB
; RETURN WITH T1 = ADR. OF THE GRABBED CORE
; & T2 = ADR. OF 1ST. FREE WORD
IFE FTXMON,<
CORGRS: ;HERE TO GET CORE FOR SATS
>
CORGRB: MOVEI T1,(T2) ;COPY WORDS NEEDED
PUSHJ P,INICOR## ;ALLOCATE CORE
EXCH T1,T2 ;T1=ADDR, T2=WORD COUNT
ADDI T2,(T1) ;PUT FIRST FREE ADDR IN T2
POPJ P, ;AND RETURN
;SUBROUTINE TO GRAB CORE FROM THE FIRST MONITOR DATA SECTION FOR THE ONCE ONLY CODE
; ENTER WITH T2 = # WORDS TO GRAB IN UPPER CORE
; RETURN WITH T1 = ADR. OF THE GRABBED CORE
; & T2 = ADR. OF 1ST. FREE WORD
IFN FTXMON,<
CORGRS: PUSH P,T2 ;SAVE AMOUNT DESIRED
MOVEI T1,(MS.SAT) ;SECTION NUMBER TO ALLOCATE FROM
PUSHJ P,GFWNZN## ;ALLOCATE THE SPACE
STOPCD .,STOP,NOCSAT, ;++NO CORE FOR SATS
POP P,T2 ;RESTORE SIZE
ADD T2,T1 ;LIKE ADVERTISED
PUSHJ P,SAVE3## ;SAVE XBLT ACS
MOVE P1,T2 ;COMPUTE WORD
SUB P1,T1 ; COUNT FOR BLT
SOS P1 ;NEED NUMBER OF WORDS -1
AOS P3,T1 ;SET UP
SOS P2,T1 ; BLT ACS
SETZM (T1) ;ZERO FIRST WORD
EXTEND P1,[XBLT] ;ZERO CORE
POPJ P, ;RETURN
>; END IFN FTXMON
;SUBROUTINE TO MOVE PARAMETERS FROM "HOME" BLOCK TO STR DATA BLOCK
MOVSTR: MOVE T1,HOMSNM##(P1)
MOVEM T1,STRNAM##(P2)
MOVE T1,HOMOPP##(P1)
MOVEM T1,STRPPN##(P2)
MOVE T1,HOMK4C##(P1)
HRRM T1,STRK4C##(P2)
MOVE T1,HOMSAT##(P1)
HRLS T1
MOVEM T1,STRSAT##(P2)
MOVE T1,UNIBPU(U)
CAMLE T1,STRBPU##(P2)
MOVEM T1,STRBPU##(P2)
MOVE T1,HOMGAR##(P1)
MOVEM T1,STRGAR##(P2)
MOVE T1,HOMOVR##(P1)
MOVEM T1,STROVR##(P2)
MOVE T1,HOMBSC##(P1)
HRLM T1,STRBSC##(P2)
MOVE T1,HOMSCU##(P1)
HRRM T1,STRSCU##(P2)
MOVE T1,HOMSRC##(P1)
MOVEM T1,STRSRC##(P2)
SKIPL T1,HOMSDL##(P1)
SUBI T1,1
MOVEM T1,STRSDL##(P2)
MOVE T1,HOMCRS##(P1)
MOVEM T1,STRCRS##(P2)
HLLZ T1,HOMCNP##(P1)
TLZ T1,77
HLLM T1,STYCNP##(P2)
HLLZ T1,HOMCKP##(P1)
TLZ T1,77
HLLM T1,STYCKP##(P2)
HLLZ T1,HOMCLP##(P1)
TLZ T1,770077
HLLM T1,STYCLP##(P2)
MOVE T2,HOMPT1##(P1) ;GET FIRST RETRIEVAL POINTER TO MFD
SETZ T1, ;GET A ZERO
DPB T1,STYCNP##(P2) ;ZERO THE COUNT FIELD IN FIRST POINTER
MOVEM T2,STRPT1##(P2) ; SO UFDNXT WILL GET FIRST POINTER FROM MFD RIB
MOVE T1,HOMREF##(P1)
HLLM T1,STRREF##(P2)
MOVE T1,STRUN1##(P2)
MOVE T2,HOMUN1##(P1)
DPB T2,UN1PTR##
MOVEM T1,STRUN1##(P2)
LDB T1,HOYPVS##
DPB T1,STYPVS##
LDB T1,HOYSET## ;GET SET NUMBER
DPB T1,STYSET## ;STORE IN SDB
POPJ P,
MSGLNG: HRROS STRREF##(P2) ;INDICATE STR NEEDS REFRESHING
PUSH P,T1 ;SAVE 2ND. MSG ADR. IN T1
MOVE T1,T3 ;GET ADR OF 1ST. MSG
PUSHJ P,ICONM##
MOVE T1,P1
PUSHJ P,RADX10##
PUSHJ P,OPOUT## ;O/P BUFFER
POP P,T1 ;RESTORE 2ND. MSG ADR.
CAIA
MSGSTR: HRROS STRREF##(P2) ;INDICATE STR NEEDS REFRESHING
PUSHJ P,ICONM## ;PUT MSG. IN BUFFER
SETOM ERRHOM ;INDICATE ERROR READING HOM BLOCKS
SETOM SERIUS ;SERIOUS ERROR - CAN'T START SYSTEM
MOVE T2,STRNAM##(P2) ;GET SIXBIT STR NAME
PUSHJ P,PRNAME## ;PRINT NAME
PJRST CRLFOP## ;END LINE
;SUBROUTINE TO READ & VERIFY ALL "BAT" BLOCKS IN THE SYSTEM
;AND SET UP SWAPPING SAT TABLES.
REDBAT: HLRZ U,SYSUNI## ;GET ADR. OF 1ST. UNIT DATA BLOCK IN THE SYSTEM
CHKBT1: MOVSI T1,UNPOFL ;GET OFFLINE FLAG
TDNE T1,UNIDES(U) ;UNIT OFFLINE?
JRST CHKBT2 ;YES, GO READ NEXT BAT BLOCK
PUSHJ P,CHKBAT ;NO - GO CHECK "BAT" BLOCKS FOR THIS UNIT
JFCL ;IGNORE ERRORS
SKIPN BATMAN ;IN MANDATORY ONCE-ONLY?
JRST CHKBT2 ;NO POINT SETTING UP SWAPPING SAT IF OPTIONAL
SE1ENT ;ENTER SECTION ONE
HRRZ T3,P1 ;LOC OF BAT BLOCK
LDB T1,BAYNBR## ;NO OF REGION FOUND BY MAPPER
ADD T1,BAFCNT##(T3) ;+ NO FOUND BY MONITOR
HLRE T3,BAFFIR##(T3) ;- TOTAL NO OF SLOTS
ASH T3,-1 ;2 WORDS PER ENTRY
ADD T3,T1 ;+ NO OF ENTRIES LEFT
MOVNS T3
DPB T3,UNYBCT## ;SAVE IN UDB
MOVE T2,UNIPTR(U) ;T2=AOBJN PTR TO SWAPPING SAT FOR THIS UNIT
SKIPGE UNISUN(U) ;IN ACTIVE SWAPPING LIST?
JRST CHKBT2 ;NO, NO SWAPPING SAT
HLRE T1,T2 ;T1=-LENGTH OF SWAPPING SAT
SUB T2,T1 ;T2=ADDR OF SECOND COPY (-T1=+LENGTH)
MOVE T1,T2 ;T1=PTR TO SECOND COPY
LDB T3,UNYK4S## ;T3=K FOR SWAPPING ON UNIT
LSH T3,K2PLSH ;DOUBLE SIZE IF SWAPPING PAGES
ADDI T3,1 ;+1 BECAUSE 0 WAS THROWN AWAY
IDIVI T3,^D36 ;T3=FULL WORDS
JUMPE T4,FULSST ;JUMP IF NO WASTED BITS
ADDI T2,(T3) ;T2=ADDR OF LAST WORD
MOVNI T3,-1(T4) ;T3=-BITS TO SET TO 0 +1
MOVSI T4,400000 ;SET SIGN BIT
ASH T4,(T3) ;SET BITS TO BE 0 TO 1
SSX T2,MS.SAT ;SECTION CONTAINING SWAPPING SATS
SETCAM T4,(T2) ;COMPLEMENT AND STORE
FULSST: AOBJP T1,NOSST ;JUMP IF 0 OR 1 WORD IN SWAPPING SAT
IFE FTXMON,<
SETZM -1(T1) ;CLEAR FIRST WORD OF SECOND COPY
HRLI T1,-1(T1) ;LH=ADDR OF FIRST WORD
MOVEI T3,(T1) ;1ST ADDR +1 = LAST ADDR? ONLY IF EXACTLY 2 WORDS
CAIGE T3,(T2) ;SKIP IF YES, NO MORE LOCATIONS TO CLEAR
BLT T1,-1(T2) ;CLEAR REST OF SECOND COPY
>
IFN FTXMON,<
HLL T1,T2 ;SECTION NUMBER
SETZM -1(T1) ;ZERO WORD 0
MOVE T3,T1 ;FIRST WORD TO ZERO
SUBM T2,T1 ;NUMBER OF WORDS TO ZERO
JUMPLE T1,NOSST ;JUMP IF THE SAT IS ONLY 2 WORDS LONG
MOVE T2,T3 ;ADDRESS OF THE 0
SUBI T2,1
EXTEND T1,[XBLT] ;ZERO THE REST
>
;FALL INTO NOSST
NOSST: MOVEI T1,-1(P1) ;T1=ADDR OF BAT BLOCK IN CORE -1
MOVE T2,[PUSHJ P,SETSST];T2=INSTRUCTION TO EX FOR BAD BLOCKS
PUSHJ P,SCNBAT## ;SCAN BAT BLOCK, CALL SETSST FOR BAD BLOCKS
MOVE T1,UDBKDB(U) ;KONTROLLER FOR THIS UNIT
SKIPGE KONPOS(T1) ;DOES IT POSITION?
JRST CHKBT2 ;NO--GO ON
PUSH P,P1 ;MAKE P1 AVAILABLE
TDZA P1,P1 ;ZERO IT AND HOP OVER NEXT INSTRUCTION
CHKCYL: PUSHJ P,SETSST ;MARK OUT PAGE IN SWAP SAT
CHKCY1: LDB T3,UNYBPY ;BLKS/CYL FOR UNIT
ADD P1,T3 ;COMPUTE NEXT LBN ON CYL BOUNDARY
CAMLE P1,UNIBPU(U) ;PAST END OF UNIT?
JRST CHKCY2 ;YES--ALL DONE
MOVE T2,P1 ;COPY OF THIS LBN
SUB T2,UNISLB(U) ;COMPUTE RELATIVE BLK NO. IN SWAP SPACE
IDIVI T2,SWBKPP## ;IS A SWAP PAGE SPLIT ACROSS CYL BOUNDARY?
JUMPE T3,CHKCY1 ;NO IF SWBKPP DIVIDES EVENLY
MOVE T1,P1 ;YES--THIS PAGE WILL NOW BE MARKED
JRST CHKCYL ; AS UNAVAILBLE IN THE SWAP SAT
; BECAUSE FILSER/VMSER DOESN'T LIKE THIS
CHKCY2: POP P,P1 ;RESTORE P1
CHKBT2: HLRZ U,UNISYS(U) ;GET ADR. OF NEXT UNIT DATA BLOCK IN SYSTEM
IFN FTXMON,<XJRST [MCSEC0+.+1]>
JUMPN U,CHKBT1 ;REPEAT IF THERE IS ONE
POPJ P, ;NONE LEFT - EXIT
CHKBAT: SETZM BATBAD ;CLEAR "BAT" BLOCK BAD FLAG
SETZM BTHBAD ;CLEAR BOTH BAD FLAG
PUSHJ P,GTBAT ;READ BOTH BAT BLOCKS & VERIFY
SETOM BTHBAD ;BOTH BAD--REMEMBER
SKIPE REDERR ;IF READ ERRORS
AOS BATANY ;ALSO FLAG THAT SOME UNIT HAS ERRORS
SKIPE REDERR ;ANY ERRORS IN EITHER ONE
SETOM BATBAD ;SET BAT BLOCK BAD FLAG
SKIPN BATMAN ;SKIP IF MANDATORY
JRST CKBAT1
SKIPN BATBAD ;ANY ERRORS IN EITHER??
POPJ P, ;NO, GO TO NEXT UNIT
HRRZ T3,P1 ;ADDR OF BAT BLOCK IN CORE
SKIPE BTHBAD ;BOTH BAD??
PJRST INTBAT ;YES-MAY AS WELL REWRITE THEM
MOVEI T2,LBOBAT## ;ONE IS GOOD & SITTING IN MBF
HLRZ T3,UNIHOM(U)
SKIPL REDERR ;SKIP IF BLOCK 2 IS GOOD & 1 IS BAD
HRRZ T3,UNIHOM(U)
ADD T2,T3 ;BLOCK 2 IS BAD-WRITE GOOD ONE ON IT
MOVEM T2,BLKSLF##(P1) ;THIS BLOCK MUST KNOW WHAT IT IS
PUSHJ P,OMNWRT ;WRITE PROPER BLOCK
PUSHJ P,WRTCHK ;ERROR-TELL OPR ABOUT IT
POPJ P,
CKBAT1: HRRZ T3,P1 ;GET ADR. OF "BAT" BLOCK INTO A BETTER AC
LDB T2,BAYNBR## ;GET # BAD REGIONS FOUND BY MAP PROGRAM.
ADD T2,BAFCNT##(T3) ;ADD IN # FOUND BY MONITOR
ADDM T2,BATANY ;ALSO FLAG THAT SOME UNIT HAS ERRORS
SKIPN BATBAD ;LIKEWISE IF ANY BAD REGIONS OR ERRORS DETECTED
POPJ P, ;EXIT
; JRST INTBAT ;GO INITIALIZE
INTBAT: MOVE T1,UDBNAM(U) ;GET DRIVE NAME
MOVEI T2,[ASCIZ /- both BAT blocks are bad/]
SKIPE BTHBAD ;BOTH BLOCKS BAD?
PUSHJ P,UWARN ;WARN OPERATOR
MOVSI T1,UNPHWP ;BIT TO TEST
TDNE T1,UNIDES(U) ;HARDWARE WRITE PROTECT TURNED ON?
POPJ P, ;THEN CAN'T INIT BAT BLOCKS
MOVEI T1,[ASCIZ /Initialize BAT blocks/]
MOVSI T2,'NO ' ;DEFAULT ANSWER
PUSHJ P,PRSYNQ## ;PROMPT AND FETCH ANSWER
JUMPE T1,CPOPJ## ;RETURN IF HE SAID "NO"
MOVEI T1,[ASCIZ /This is not normally done. Are you sure/]
MOVSI T2,'NO ' ;DEFAULT ANSWER
PUSHJ P,PRSYNQ## ;PROMPT AND FETCH ANSWER
JUMPE T1,CPOPJ## ;RETURN IF HE SAID "NO"
PUSHJ P,SETBAT ;SETUP "BAT" BLOCK PARAMETERS
HRRZ T3,P1 ;GET BUFFER ADDRESS IN BETTER AC
MOVSI T1,(T3) ;SETUP BLT PTR. TO CLEAR "BAT" BLOCK
HRRI T1,1(T3)
SETZM (T3) ;CLEAR OUT 1ST. WORD
BLT T1,BLKSLF##(T3) ;CLEAR OUT THE REST OF THE BLOCK
MOVEM P2,BLKNAM##(T3) ;PUT SIXBIT 'BAT' IN THE BLOCK
MOVEM P3,BLKCOD##(T3) ;SAVE THE CODE FOR "BAT" BLOCKS IN THE BLOCK
MOVSI T1,MBRMAX## ;SETUP AOBJN PTR. TO BE STORED IN BLOCK
HRRI T1,BAFREG##
MOVEM T1,BAFFIR##(T3) ;SAVE IT IN THE BLOCK
MOVE J,UDBKDB(U) ;GET UNIT'S KONTROLLER DATA BLOCK ADR.
MOVE T1,KDBDVC(J) ;GET DEVICE CODE FOR THE KONTROLLER
DPB T1,BAYKDC## ;SAVE IT IN THE BLOCK
MOVEI T1,[ASCIZ/Initializing BAT blocks/]
PUSHJ P,CONOUT##
PJRST WRTRUN ;WRITE BOTH "BAT" BLOCKS
BATBAD: 0 ;0 INDICATES VIRGIN "BAT" BLOCKS(INITIALIZED)
; LH = -1 INDICATES ERROR(S) DETECTED WHILE READING
; RH = # BAD REGIONS ON UNIT
BTHBAD: 0 ;0=NOT BOTH BAD, -1 = BOTH BAD
BATMAN: 0 ;0=OPTIONAL, -1=MANDANTORY
BATANY: 0 ;NON-ZERO IF ANY BAD REGIONS ON ANY UNITS
LSTBAT: 0 ;NON-ZERO IF LIST # BAD REGIONS
GTBAT: PUSHJ P,SETBAT ;SETUP "BAT" BLOCK PARAMETERS FOR REDRUN
PJRST REDRUN ;GO READ & VERIFY BLOCKS
SETBAT: MOVSI P2,(SIXBIT .BAT.)
MOVE P3,[EXP CODBAT## ]
MOVE P4,[XWD LBOBAT##,LBOBAT ]
ADD P4,UNIHOM(U)
POPJ P,
;SUBROUTINE TO SET BITS IN SWAPPING SAT TABLE FOR BAD BLOCKS IN SWAPPING SPACE
;ARGS T1=BLOCK NUMBER WITHIN UNIT
SETSST: SKIPGE UNISUN(U) ;UNIT IN A.S.L?
POPJ P, ;NO, RETURN
PUSHJ P,SAVE4## ;SAVE P1-P4
SUB T1,UNISLB(U) ;T1=RELATIVE BLOCK IN SWAPPING SPACE
JUMPL T1,CPOPJ## ;EXIT IF BLOCK BELOW SWAPPING SPACE
LDB P3,UNYK4S## ;P3=K FOR SWAPPING ON THIS UNIT
JUMPE P3,CPOPJ## ;EXIT IF NO SWAPPING SPACE ON UNIT
MOVE T2,P3
LSH T2,BLKSPK ;CONVERT TO BLOCKS
CAML T1,T2 ;SKIP IF BLOCK IN SWAPPING SPACE
POPJ P, ;NO, PAST END
MOVEI P1,SWBKPP## ;8 BLOCKS PER K
SETZ P2, ;STARTING AT LOGICAL K 0
SUBI P3,1 ;LAST LOGICAL J NUMBER
MOVE P4,UNIPTR(U) ;PTR TO SWAPPING SAT
HLRE T2,P4 ;T2=-LENGTH OF SWAPPING SAT
SUB P4,T2 ;P4=AOBJN PTR TO SECOND COPY
SUBI P4,1 ;MAKE IOWD PTR
ADDI T1,SWBKPP## ;SWAPPING SPACE STARTS AT 1 FOR VM
SSX P4,MS.SAT ;SECTION NUMBER FOR SWAPPING SATS
;ADDRESS OF THE SAT
PUSHJ P,CHKBIT## ;FIND BIT
ORM T4,(T1) ;WAS NOT ON, SET IT
POPJ P, ;THATS ALL
;SUBROUTINE TO TYPE ALL UNITS IN SYSTEM THAT ARE NOT IN ANY STR
; RETURN WITH P1,P4,F,U & J DESTROYED
TYPUNS: PUSHJ P,OTSET##
HLRZ U,SYSUNI## ;GET ADR. OF 1ST. UNIT DATA BLOCK IN SYSTEM
PUSH P,[0] ;INITIALIZE COUNTER
TDZA P4,P4 ;INDICATE UNIT ID TO BE TYPED IN TYPUNI
TYPNS1: HLRZ U,UNISYS(U) ;GET ADR. OF NEXT UNIT DATA BLOCK IN SYSTEM
JUMPE U,TYPNS4 ;EXIT IF NONE LEFT
SKIPE UNILOG(U) ;IS THIS UNIT IN AN STR?
JRST TYPNS1 ;YES - CHECK NEXT UNIT
MOVEI P1,[ASCIZ .,.] ;ASSUMUE DEFAULT CASE:NON-FIRST UNIT ON A LINE
SOSLE T1,(P) ;FINISHED ON THIS LINE?
JRST TYPNS3 ;OUTPUT STANDARD CASE
MOVEI P1,[ASCIZ .,
.]
JUMPE T1,TYPNS2 ;AND IF THAT IS TRUE,CHARGE AHEAD
MOVEI P1,[ASCIZ .
Units not in a file structure:
.]
TYPNS2: MOVEI T1,UNTPLN ;RESET COUNTER
MOVEM T1,(P)
TYPNS3: PUSHJ P,TYPUN1
JRST TYPNS1
TYPNS4: POP P,T1
JUMPLE T1,OPOUT## ;IF FOUND NO UNITS TO TYPE
PJRST CRLFOP## ;IF FOUND AT LEAST ONE
;SUBROUTINE TO TYPE ALL UNITS IN SYSTEM THAT ARE IN AN STR WHICH IS
;NOT MOUNTED TO THIS SYSTEM
; RETURN WITH P1,P4,F,U & J DESTROYED
TYPNMU: PUSHJ P,OTSET##
HLRZ U,SYSUNI## ;GET ADR. OF 1ST. UNIT DATA BLOCK IN SYSTEM
PUSH P,[0] ;INITIALIZE COUNTER
TDZA P4,P4 ;INDICATE UNIT ID TO BE TYPED IN TYPUNI
TYPNM1: HLRZ U,UNISYS(U) ;GET ADR. OF NEXT UNIT DATA BLOCK IN SYSTEM
JUMPE U,TYPNM4 ;EXIT IF NONE LEFT
MOVSI T1,UNPNMU ;GET THE FLAG
TDNN T1,UNIDES(U) ;DOES THIS UNIT GET MOUNTED?
JRST TYPNM1 ;YES - CHECK NEXT UNIT
MOVEI P1,[ASCIZ .,.] ;ASSUMUE DEFAULT CASE:NON-FIRST UNIT ON A LINE
SOSLE T1,(P) ;FINISHED ON THIS LINE?
JRST TYPNM3 ;OUTPUT STANDARD CASE
MOVEI P1,[ASCIZ .,
.]
JUMPE T1,TYPNM2 ;AND IF THAT IS TRUE,CHARGE AHEAD
MOVEI P1,[ASCIZ .
Units in a disk-set which is not mounted to this system:
.]
TYPNM2: MOVEI T1,UNTPLN ;RESET COUNTER
MOVEM T1,(P)
TYPNM3: PUSHJ P,TYPUN1
JRST TYPNM1
TYPNM4: POP P,T1
JUMPLE T1,OPOUT## ;IF FOUND NO UNITS TO TYPE
PJRST CRLFOP## ;IF FOUND AT LEAST ONE
;SUBROUTINE TO TYPE SIXBIT UNIT NAME FOLLOWED BY (ID/SWAPPING CLASS)
; ENTER WITH U = UNIT DATA BLOCK ADR.
; P4 = 0 TO TYPE UNIT ID. P4 = -VE TO TYPE SWAPPING CLASS
TYPUNI: MOVEI P1,[ASCIZ .,.]
TYPUN1: MOVE T1,P1 ;GET MSG. ADR. INTO KOSHER AC
PUSHJ P,CONMES## ;PUT "," OR MSG. IN BUFFER
JUMPE U,CPOPJ## ;JUST O/P MSG. IF NO UNITS IN ASL
MOVE T1,UDBNAM(U) ;GET DRIVE NAME
PUSHJ P,PRNAME## ;PRINT IT
MOVEI T1,[ASCIZ .(.]
PUSHJ P,CONMES## ;PUT "(" IN BUFFER
JUMPL P4,TYPUN2 ;JUMP IF CLASS FOR SWAPPING TO BE TYPED
MOVE T2,UNIHID(U) ;GET SIXBIT UNIT ID - IF ANY
TLNE T2,777777 ;AVOID 0,,JUNK
PUSHJ P,PRNAME## ;PUT IT IN THE BUFFER
JRST TYPUN3
TYPUN2: LDB T1,UNYCFS## ;GET CLASS FOR SWAPPING
PUSHJ P,RADX10## ;PUT DECIMALLY IN THE BUFFER
TYPUN3: MOVEI T1,[ASCIZ .).]
PJRST CONMES##
FNDSRC: MOVSI P3,-.SLMXS ;SETUP AOBJN PTR. FOR MAX. # STRS IN SEARCH LIST
FNDSR1: HLRZ P2,SYSSTR## ;GET ADR. OF 1ST. STR IN SYSTEM
JUMPE P2,CPOPJ## ;QUIT NOW IF NO FILE STRUCTURES
FNDSR2: MOVE T1,STRSRC##(P2) ;GET LOG. # OF STR IN SEARCH LIST
CAIE T1,(P3) ;IS IT THE ONE WE'RE LOOKING FOR?
JRST FNDSR3 ;NO - GET NEXT STR
XCT P4 ;EXECUTE INSTR. SUPPLIED BY CALLER
AOBJP P3,CPOPJ## ;EXIT IF MAX. # STRS SEEN
JRST FNDSR1
FNDSR3: HLRZ P2,STRSYS##(P2) ;GET ADR. OF NEXT STR DATA BLOCK IN SYSTEM
JUMPN P2,FNDSR2 ;REPEAT IF ANY LEFT
AOBJN P3,FNDSR1 ;LOOK FOR NEXT LOG. STR #
POPJ P, ;EXIT
DEPCLR: HRRZ T1,STRFSN##(P2) ;GET # OF THIS STR
EXCH P2,TEMPTR ;PUT IT IN SYS SL.
PUSHJ P,SLAPD##
PUSHJ P,SLXAES## ;STOPCD AES IF NO ROOM
PUSH P,P2 ;SAVE CURRENT LOC IN SL.
MOVEI T1,.FSFNC ;INSERT A FENCE
PUSHJ P,SLAPD##
PUSHJ P,SLXAES##
POP P,P2 ;BACK UP OVER THE FENCE
EXCH P2,TEMPTR
POPJ P, ;EXIT
HGHSIZ: MOVE T1,UNIBPU(U) ;GET # BLOCKS ON UNIT
ADDM T1,STRSIZ##(P2) ;ADD TO TOTAL # BLOCKS IN STR
MOVE T1,STRBPU##(P2) ;GET MAX. # BLOCKS PER UNIT IN STR
ADDM T1,STRHGH##(P2) ;ADD TO HIGHEST LOG. BLOCK # IN STR
HLRZ U,UNISTR(U) ;GET ADR. OF NEXT UNIT DATA BLOCK IN STR
JUMPN U,HGHSIZ ;REPEAT IF ANY LEFT
SOS STRHGH##(P2) ;MAKE STRHGH BE HIGHEST LOG. BLOCK # IN STR
POPJ P, ;RETURN
INSUNI: HRRZ T1,UNISTR(U) ;SEE IF THIS UNIT IS ALREADY IN AN STR
JUMPE T1,INSUN1 ;T1 = 0 IF IT ISN'T
MOVEI T1,[ASCIZ .
?Unit already in file structure
.]
PJRST CONOUT## ;TYPE MSG. & EXIT
INSUN1: HRLM U,(P3) ;LINK THIS UNIT DATA BLOCK TO PREVIOUS ONE
HRRZM P2,UNISTR(U) ;ATTACH THIS UNIT DATA BLOCK TO THIS STR
HRRZ T1,STRUNM##(P2) ;GET LOGICAL UNIT # WITHIN STR
DPB T1,UNYLUN## ;SAVE IT IN UNIT DATA BLOCK
PUSHJ P,CMPLOG ;COMPUTE SIXBIT LOGICAL UNIT NUM, STORE IN UNILOG
MOVE T1,UNIBPU(U)
CAMLE T1,STRBPU##(P2)
MOVEM T1,STRBPU##(P2)
CAIE P1,0 ;SKIP IF 1ST UNIT
CAMGE T1,UNIBPU(P1) ;COMPARE WITH SMALLEST SO FAR
MOVE P1,U ;SAVE ADDR OF SMALLEST IN P1
AOS STRUNM##(P2) ;INCREMENT # OF UNITS IN STR
PUSHJ P,SETCHG ;FLAG THAT UNIT'S "HOME" BLOCKS MUST BE REWRITTEN
MOVEI P3,UNISTR(U) ;MAKE CURRENT UNIT PREDECESSOR
JRST CPOPJ1## ;SKIP RETURN
;SUBROUTINE TO SET DEFAULTS IN STR DATA BLOCK
;ARGS P1=ADDR OF SMALLEST UNIT IN STR
PARSET: MOVE U,P1 ;U=ADDR OF SMALLEST UNIT IN STR
LDB P1,UNYKTP## ;CONTROLLER TYPE OF SMALLEST UNIT
MOVE T2,GRPDEF(P1) ;UNIGRP DEFAULT
MOVE T1,[HRLM T2,UNIGRP(U)]
PUSHJ P,STOUNI ;STORE IN ALL UNIT DATA BLOCKS
PUSH P,P1 ;SAVE CONTROLLER TYPE
MOVE P1,BPCDEF(P1) ;P1 IS ARG FOR BPCSTO
PUSHJ P,BPCSTO ;STORE BPC AND SET UP BYTE POINTERS
MOVE T3,(P) ;CONTROLLER TYPE TO T3
MOVE P1,CNPDEF(T3) ;DEFAULT BITS PER CLUSTER COUNT FIELD
LDB T3,[POINT 6,STYCLP##(P2),11] ;BITS PER CLUSTER ADDR FIELD
PUSHJ P,CNPSTO ;STORE THAT IN BYTE POINTERS
POP P,P1 ;RESTORE CONTROLLER TYPE
MOVE T1,GARDEF(P1) ;DEFAULT RESERVE
MOVEM T1,STRGAR##(P2)
MOVE T1,OVRDEF(P1) ;DEFAULT OVERDRAW
MOVNM T1,STROVR##(P2) ;STORED NEGATIVE
SKIPGE T1,K4CDEF(P1) ;GET K FOR CRASH.EXE
MOVEI T1,M.NKC## ;-1 MEANS USE DEFAULT FROM MONGEN
HRRM T1,STRK4C##(P2) ;K FOR CRASH.SAV
PJRST CHGSTX ;SET BIT TO WRITE OUT HOME BLOCKS
;SUBROUTINE TO CLOSE UP SLOTS IN SDL AND SSL WHEN DISSOLVING AN STR
;ARGS T1=POSITION IN SDL/SSL OF DISSOLVED STR
FIXSSL: SETZM PRESSL## ;FORGET PRESERVED SSL
PUSHJ P,SAVE4## ;SAVE P1-P4
DMOVE P3,[CAML P1,STRSRC##(P2) ;INSTRUCTIONS TO TEST
SOS STRSRC##(P2)] ;...
JRST FIXSSD ;ON YOUR WAY
FIXSDL: SETZM PRESDL## ;FORGET PRESERVED SDL
PUSHJ P,SAVE4## ;SAVE P1-P4
DMOVE P3,[CAML P1,STRSDL##(P2) ;INSTRUCTIONS TO TEST
SOS STRSDL##(P2)] ;...
FIXSSD: MOVE P1,T1 ;COPY POSITION OF DISSOLVED STR
MOVEI P2,SYSSTR##-STRSYS## ;SET LINK FOR FIRST STRUCTURE
FIXSS1: HLRZ P2,STRSYS##(P2) ;GET NEXT STRUCTURE
JUMPE P2,CPOPJ## ;RETURN IF JUST CHECKED LAST STR
XCT P3 ;THIS STR AFTER THE ONE WHICH WAS JUST DISSOLVED?
JRST FIXSS1 ;NO
XCT P4 ;YES, MOVE IT DOWN ONE PLACE
PUSHJ P,CHGSTX ;FLAG UNITS AS NEEDING THEIR HOME BLOCKS REWRITTEN
JRST FIXSS1 ;LOOP FOR MORE
;SUBROUTINE TO DETERMINE IF ANY UNITS ARE NOT IN STR'S
;SKIP RETURN IF YES, NO SKIP IF NO
HLRZ U,SYSUNI## ;U=1ST UNIT IN SYSTEM
ALLINS: JUMPE U,CPOPJ## ;NO MORE UNITS, ALL MUST BE IN STRS
SKIPN UNILOG(U) ;SKIP IF THIS UNIT IS IN AN STR
JRST CPOPJ1##
HLRZ U,UNISYS(U) ;NEXT UNIT IN SYSTEM
JRST ALLINS
;SUBROUTINE TO COMPUTE SIXBIT LOGICAL UNIT NUMBER WITHIN STR
CMPLOG: PUSH P,P3
MOVE P3,T1
LSH P3,-^D3
ADDI P3,20
LSH P3,^D6
ANDI T1,7
ADDI P3,20(T1)
MOVE T1,STRNAM##(P2)
PUSHJ P,MSKUNI##
SETCA T2,0
JFFO T2,.+2
STOPCD .+1,DEBUG,JDJ, ;++JFFO DIDN'T JUMP
MOVEI T2,^D24
TRNE P3,700
JRST INSUN2
TRZ P3,7700
MOVEI T2,^D30
INSUN2: SUB T2,T3
LSH P3,(T2)
ADD T1,P3
MOVEM T1,UNILOG(U)
POP P,P3
POPJ P,
;ROUTINE TO CLEAR OUT ENTIRE ACTIVE SWAPPING LIST...
;DOES NOT ASSUME ACTIVE SWAPPING LIST IS ALREADY SETUP.
KASL: SETZM PREASL## ;FORGET PRESERVED ASL
MOVEI U,SYSUNI##-UNISYS
KASL1: HLRZ U,UNISYS(U)
JUMPE U,KASL2
PUSHJ P,SETCHG ;MARK AS NEEDING HOM BLOCKS REWRITTEN
SETOM UNISUN(U) ;UNIT NO LONGER IN ASL
HRRZS UNISWP(U) ;CLEAR LINK
JRST KASL1
KASL2: MOVE T1,[XWD SWPTAB##,SWPTAB##+1] ;GET BLT POINTER TO CLEAR OUT
SETZM SWPTAB## ;SWPTAB
BLT T1,SWPTBE## ;CLEAR TO THE LAST DROP
POPJ P, ;RETURN
;ROUTINE TO GIVE UP CORE USED BY SDBS, SATS, AND SPTS
RTNCOR: PUSHJ P,SAVE2## ;FREE UP P1 AND P2
;SDBS
MOVE P1,STRAOB## ;GET AOBJN POINTER INTO TABSTR
RTNCR1: MOVEI T1,STRLEN## ;NUMBER OF WORDS FOR A STRUCTURE DATA BLOCK
SKIPE T2,TABSTR##(P1) ;GET ADDRESS, SKIP IF STRUCTURE NOT DEFINED
PUSHJ P,GIVWDS## ;RETURN THE SPACE
SETZM TABSTR##(P1) ;ZERO THE POINTER
AOBJN P1,RTNCR1 ;LOOP FOR ALL POSSIBLE STRUCTURES
;LOOP OVER EACH UNIT RETURNING SPACE
HLRZ U,SYSUNI## ;GET FIRST UNIT DATA BLOCK
RTNCR2:
IFE FTXMON,<
;SATS
LDB P1,UNYSIC## ;GET NUMBER OF SATS IN CORE
JUMPLE P1,RTNCR4 ;NOTHING TO RETURN IF UNYSIC = 0
MOVE P2,UNISAB(U) ;GET ADDRESS OF FIRST SAB IN RING
RTNCR3: MOVE T2,P2 ;COPY SAB ADDRESS
MOVE P2,SABRNG##(P2) ;REMEMBER ADDRESS OF NEXT SAB
LDB T1,UNYWPS## ;GET WORDS PER SAT
ADDI T1,SABBIT## ;INCLUDE OVERHEAD WORDS
PUSHJ P,GIVWDS## ;GIVE BACK THE SPACE
SOJG P1,RTNCR3 ;LOOP FOR ALL SABS
RTNCR4: SETZM UNISAB(U) ;FORGET ABOUT IT
;SPT
LDB T1,UNYSPU## ;GET NUMBER OF SATS PER UNIT
ADDI T1,SPTFIR##+1 ;INCLUDE OVERHEAD WORDS
HRRZ T2,UNISPT(U) ;GET ADDRESS OF SPT
SKIPE T2 ;IF THERE IS ONE,
PUSHJ P,GIVWDS## ; RETURN IT
SETZM UNISPT(U) ;FORGET ABOUT IT
;SWAPPING SAT
HLRE T1,UNIPTR(U) ;GET -VE LENGTH OF SWAPPING SAT
JUMPE T1,RTNCR5 ;NOTHING TO RETURN IF NO SST
MOVMS T1 ;GET JUST THE MAGNITUDE
LSH T1,1 ;ACCOUNT FOR DOUBLE ALLOCATION (SEE CRESST)
HRRZ T2,UNIPTR(U) ;GET ADDRESS OF SST
SKIPE T2 ;IF THERE IS ONE,
PUSHJ P,GIVWDS## ; RETURN IT
SETZM UNIPTR(U) ;FORGET ABOUT IT
RTNCR5:
IFN FTDUAL,<
SKIPN T1,UNI2ND(U) ;GET POINTER TO SECOND PORT
JRST RTNCR6 ;NONE
SETZM UNISAB(T1) ;ZERO OUT COPIED POINTERS
SETZM UNISPT(T1)
SETZM UNIPTR(T1)
RTNCR6:
>; END IFN FTDUAL
>; END IFE FTXMON
HLRZ U,UNISYS(U) ;GET NEXT UNIT
JUMPN U,RTNCR2 ;LOOP IF MORE UNITS
POPJ P, ;RETURN
CKUSTR: SKIPN .UONCE## ;IF EXEC MODE,
JRST CPOPJ1## ;THEN IT ISN'T MOUNTED IN USER MODE
PJRST UCKSTR## ;USER MODE HAS TO CHECK
REFCHU: SKIPN .UONCE## ;IF EXEC MODE,
JRST REFCHZ ;JUST GO DO IT
PUSH P,T2 ;SAVE THE OLD VALUE
PUSHJ P,UCKSTR## ;SEE IF WE REALLY WANT TO DO THIS
JRST TPOPJ## ;NO--GO BACK TO THE OLD VALUE
POP P,T2 ;YES--PROCEED TO MAKE THE CHANGE
REFCHZ: SKIPE P2 ;UNIT PART OF A STRUCTURE?
HRROS STRREF##(P2) ;YES - INDICATE STR NEEDS REFRESHING
PJRST SETCHG ;FLAG "HOME" BLOCKS MUST BE REWRITTEN
REFCHS: HLRZ U,STRUNI##(P2) ;GET FIRST UNIT IN STRUCTURE
MOVSI T2,UNPNNA ;AND USER-MODE 'MOUNTED' FLAG
SKIPE .UONCE## ;NOT A PROBLEM IN EXEC MODE
TDNN T2,UNIDES(U) ;DO WE NEED TO WORRY?
JRST REFCHY ;NO--JUST DO IT
PUSH P,T1 ;YES--SAVE OLD VALUE
PUSHJ P,UCKSTR## ;MAKE SURE WE WANT TO PROCEED
JRST P1POPJ## ;NO--GO BACK TO THE OLD VALUE
POP P,T1 ;YES--PROCEED TO MAKE A DRASTIC CHANGE
REFCHY: HRROS STRREF##(P2) ;INDICATE STR NEEDS REFRESHING
CHGSTX: MOVE T1,[PUSHJ P,SETCHG] ;GET INSTR. TO BE EXECUTED BY STOUNI
;JRST STOUNI ;FALL INTO STOUNI
;SUBROUTINE TO EXECUTE AN INSTRUCTION FOR ALL UNITS WITHIN AN STR
; USUALLY STORES A BYTE
;T1=INSTRUCTION TO BE EXECUTED, P1=ARG., P2=STR DATA BLOCK ADR.
STOUNI: HLRZ U,STRUNI##(P2)
PUSH P,T1
STOUN1: XCT (P) ;EXECUTE INSTRUCTION SUPPLIED IN AC T1
HLRZ U,UNISTR(U)
JUMPN U,STOUN1
JRST TPOPJ##
;SUBROUTINE TO COMPUTE # CLUSTERS & WORDS PER SAT
CMCWPS: PUSHJ P,SAVE4## ;SAVE P1-P4
PUSHJ P,COMLC1 ;NOW COMPUTE # CLUSTERS PER SAT
SOS T2
LDB P1,UNYSPU## ;GET # SATS PER UNIT IN THIS STR
IDIV T2,P1
HRRM T2,UNICPS(U) ;STORE COMPUTED VALUE
AOS UNICPS(U) ;MAKE VALUE IN UNIT DATA BLOCK RIGHT
IDIVI T2,^D36
ADDI T2,1
DPB T2,UNYWPS## ;STORE COMPUTED VALUE
POPJ P, ;EXIT
COMLCA: HLRZ U,STRUNI##(P2) ;GET ADR. OF 1ST. UNIT DATA BLOCK IN STR
JRST COMLC2 ;IS UNIT IN AN STR?
COMLC1: SKIPA T2,UNIBPU(U) ;NO - GET # BLOCKS ON UNIT
COMLC2: MOVE T2,STRBPU##(P2) ;YES - GET # BLOCKS PER UNIT
LDB T4,UNYBPC## ;GET # BLOCKS PER CLUSTER
IDIV T2,T4 ;COMPUTE LAST CLUSTER ADR. ON UNIT
POPJ P, ;RETURN
;T2 & T3 ARE RESPECTED
SETCHG: PUSH P,T1 ;NEED TO SAVE T1 THESE DAYS
MOVSI T1,UNPCHG ;PREPARE TO FLAG "HOME" BLOCKS NEED REWITING
MOVSI T4,UNPWPO
TDNN T4,UNIDES(U) ;IS UNIT WRITE PROTECTED OR OFF-LINE?
IORM T1,UNIDES(U) ;SET UNPCHG FLAG
JRST TPOPJ## ;RETURN
;SUBROUTINE TO SEE IF ANY UNIT IN THE SYSTEM HAS THE 'UNPCHG' BIT ON
CHKCHG: MOVSI T1,UNPCHG ;BIT TO TEST
HLRZ U,SYSUNI## ;GET FIRST UNIT DATA BLOCK IN SYSTEM
CHKCH1: TDNE T1,UNIDES(U) ;NEED TO REWRITE HOME BLOCKS?
JRST CPOPJ1## ;YES - SKIP RETURN
HLRZ U,UNISYS(U) ;GET ADR. OF NEXT UNIT DATA BLOCK IN SYSTEM
JUMPN U,CHKCH1 ;REPEAT IF THERE IS ONE LEFT
POPJ P, ;NO "HOME" BLOCKS NEED REWRITING
;ROUTINE JUST TO WRITE OUT A HOME BLOCK FOR A UNIT WITHOUT READING IT IN.
;CALLED WITH UNIT DATA BLOCK ADRESS IN U
HOMWRT: PUSHJ P,GTHOM ;GET "HOME" BLOCK INTO CORE
JFCL ;IGNORE ERRORS
HRRZ P1,@ONCMBF ;ADRESS OF MONITOR BUFFER
ADDI P1,1 ;POINT IT PAST FIRST IOWD
MOVSI P2,'HOM' ;BLOCK NAME
MOVE P3,[CODHOM##] ;IDENTIFYING CODE
MOVEM P2,BLKNAM##(P1) ;SAVE SIXBIT "HOME" BLOCK IDENTIFIER
HRRZ P2,UNISTR(U) ;GET STR DATA BLOCK ADR.
MOVE T1,UNIHID(U) ;GET SIXBIT UNIT ID
MOVEM T1,HOMHID##(P1) ;SAVE IN "HOME" BLOCK
SETZM HOMLEN##+1(P1)
HRLZI T1,HOMLEN##+1(P1)
HRRI T1,HOMLEN##+2(P1)
BLT T1,HOMLEN##+4(P1)
MOVEI T1,MFDSIZ## ;MAKE UFD'S FOR [1,1] AND [1,4]
MOVEM T1,HOMLEN##+3(P1) ; EXTRA LONG TO MINIMISE DSK READ
MOVEM T1,HOMLEN##+5(P1)
HLRZ T1,UNISTR(U) ;GET NEXT UNIT DATA BLOCK ADR. IN STR
SKIPE T1 ;SAVE 0 IF LAST UNIT IN STR OR NOT IN AN STR
MOVE T1,UNIHID(T1) ;GET ITS ID
MOVEM T1,HOMNXT##(P1) ;SAVE IN "HOME" BLOCK
SKIPE T1,P2 ;SAVE 0 STR NAME IF UNIT NOT IN AN STR
MOVE T1,STRNAM##(P2) ;GET SIXBIT STR NAME
MOVEM T1,HOMSNM##(P1) ;SAVE IN "HOME" BLOCK
SKIPE T1,P2 ;STORE 0 FOR OWNER PPN IF UNIT NOT IN A STR
MOVE T1,STRPPN##(P2) ;GET OWNER PPN
MOVEM T1,HOMOPP##(P1) ;SAVE IN "HOME" BLOCK
JUMPE P2,HOMWR3 ;BYPASS ALL REFERENCES TO VALUES IN STR
HLRZ T1,STRUNI##(P2) ;GET ADR. OF 1ST UNIT DATA BLOCK IN STR
HOMWR1: JUMPE T1,HOMWR2 ;IF NONE LEFT SAVE 0 IN HOMPRV
HLRZ T2,UNISTR(T1) ;GET ADR. OF NEXT UNIT DATA BLOCK IN STR
MOVE T3,UNIHID(T1) ;GET CURRENT UNIT'S SIXBIT ID
MOVE T1,T2 ;CURRENT UNIT_NEXT UNIT
CAME T2,U ;ADDR OF NEXT UNIT SAME AS THIS ONE?
JRST HOMWR1 ;PUT SIXBIT ID INTO THIS UNIT'S "HOME" BLOCK
HOMWR2: MOVEM T3,HOMPRV##(P1) ;SAVE IN "HOME" BLOCK
HLRZ T1,STRBSC##(P2) ;GET # BLOCKS PER SUPER CLUSTER
MOVEM T1,HOMBSC##(P1) ;SAVE IN "HOME" BLOCK
HRRZ T1,STRSCU##(P2) ;GET # SUPER CLUSTERS PER UNIT
MOVEM T1,HOMSCU##(P1) ;SAVE IN "HOME" BLOCK
MOVE T1,STRSRC##(P2) ;GET LOG. STR # OF STR IN "SYS" SEARCH LIST
MOVEM T1,HOMSRC##(P1) ;SAVE IN "HOME" BLOCK
SKIPL T1,STRSDL##(P2) ;CONVERT POS IN SDL FROM INTERNAL 0...N-1
ADDI T1,1 ; TO 1...N IN HOME BLOCK BUT LEAVE -1 ALONE
MOVEM T1,HOMSDL##(P1) ;STORE IN HOME BLOCK
MOVE T1,STYCNP##(P2) ;GET BYTE PTR. FOR CLUSTER COUNT
MOVEM T1,HOMCNP##(P1) ;SAVE IN "HOME" BLOCK
MOVE T1,STYCKP##(P2) ;GET BYTE PTR. FOR CHECKSUM
MOVEM T1,HOMCKP##(P1) ;SAVE IN "HOME" BLOCK
MOVE T1,STYCLP##(P2) ;GET BYTE PTR. FOR CLUSTER ADR.
MOVEM T1,HOMCLP##(P1) ;SAVE IN "HOME" BLOCK
MOVE T1,STRGAR##(P2) ;GET # BLOCKS GUARANTEED TO USER BY RESERVATION
MOVEM T1,HOMGAR##(P1) ;SAVE IN "HOME" BLOCK
HLLZ T1,STRREF##(P2) ;GET 'REFRESH' FLAG
HLLM T1,HOMREF##(P1) ;SAVE IN "HOME" BLOCK
MOVE T1,STROVR##(P2) ;GET -VE # BLOCKS USER IS ALLOWED TO OVERDRAW
MOVEM T1,HOMOVR##(P1) ;SAVE IN "HOME" BLOCK
HRRZ T1,STRK4C##(P2) ;GET # K FOR CRASH.SAV
MOVEM T1,HOMK4C##(P1) ;SAVE IN "HOME" BLOCK
LSH T1,BLKSPK ;CONVERT TO # BLOCKS
SKIPE T1 ;NO EXE DIRECTORY IF NO FILE
ADDI T1,4 ;ALLOCATE 1 MORE PAGE FOR EXE DIRECTORY
MOVEM T1,HOMLEN##(P1) ;SAVE IN "HOME" BLOCK
LDB T1,STYPVS## ;GET PRIVATE STR BIT
DPB T1,HOYPVS## ;SAVE IN "HOME" BLOCK
LDB T1,STYSET## ;GET SET NUMBER
DPB T1,HOYSET## ;SAVE IN "HOME" BLOCK
HOMWR3: MOVE T1,UNILOG(U) ;GET SIXBIT LOGICAL UNIT WITHIN STR
MOVEM T1,HOMLOG##(P1) ;SAVE IN "HOME" BLOCK
LDB T1,UNYLUN## ;GET LOGICAL UNIT # WITHIN STR
MOVEM T1,HOMLUN##(P1) ;SAVE IN "HOME" BLOCK
MOVE T1,UNIHOM(U) ;GET LOG. BLOCK #'S OF BOTH "HOME" BLOCKS
MOVEM T1,HOMHOM##(P1) ;SAVE IN "HOME" BLOCK
HLL T1,UNIGRP(U) ;GET # CONSECUTIVE CLUSTERS TRIED FOR ON O/P
HLRZM T1,HOMGRP##(P1) ;SAVE IN "HOME" BLOCK
LDB T1,UNYK4S## ;GET # K FOR SWAPPING ON THIS UNIT
MOVEM T1,HOMK4S##(P1) ;SAVE IN "HOME" BLOCK
LDB T1,UNYBPC## ;GET # BLOCKS PER CLUSTER
MOVEM T1,HOMBPC##(P1) ;SAVE IN "HOME" BLOCK
LDB T1,UNYSIC## ;GET # SAT BLOCKS IN CORE FOR THIS UNIT
MOVEM T1,HOMSIC##(P1) ;SAVE IN "HOME" BLOCK
MOVE T1,UNISUN(U) ;GET LOG. UNIT # IN ASL
MOVEM T1,HOMSUN##(P1) ;SAVE IN "HOME" BLOCK
SKIPE T1,SWPTAB##+1(T1) ;GET UNIT OF NEXT UNIT IN ASL
MOVE T1,UNIHID(T1) ;GET ITS SIXBIT ID
MOVEM T1,HOMSID##(P1) ;SAVE IN "HOME" BLOCK
MOVE T1,UNISLB(U) ;GET 1ST. LOG. BLOCK # FOR SWAPPING
MOVEM T1,HOMSLB##(P1) ;SAVE IN "HOME" BLOCK
LDB T1,UNYCFS## ;GET CLASS FOR SWAPPING
MOVEM T1,HOMCFS##(P1) ;SAVE IN "HOME" BLOCK
LDB T1,UNYSPU## ;GET # SAT BLOCKS PER UNIT
MOVEM T1,HOMSPU##(P1) ;SAVE IN "HOME" BLOCK
LDB T1,UNYUTP## ;GET UNIT TYPE
MOVEM T1,HOMUTP##(P1) ;SAVE IN 'HOME' BLOCK
;HERE TO CLEAR UNUSED PORTIONS OF HOME BLOCK
MOVEI T1,HOMEND##+1(P1) ;FIRST WORD TO CLEAR
CAILE T1,HOMCOD##-1(P1) ;SKIP IF AT LEAST ONE WORD
JRST HOMWR4
SETZM (T1) ;CLEAR THE FIRST WORD
CAIN T1,HOMCOD##-1(P1) ;SKIP IF MORE
JRST HOMWR4
HRLZI T1,HOMEND##+1(P1)
HRRI T1,HOMEND##+2(P1)
BLT T1,HOMCOD##-1(P1) ;CLEAR UNUSED WORDS
HOMWR4: PUSHJ P,WRTVID ;STORE VOLID STUFF IN HOME BLOCK
MOVEM P3,BLKCOD##(P1) ;SAVE CODE WORD IN "HOME" BLOCK
MOVE P4,UNIHOM(U) ;GET LOG BLOCK #'S OF 1ST. & 2ND. "HOME" BLOCKS
PUSHJ P,WRTRUN ;WRITE OUT BOTH "HOME" BLOCKS
JFCL ;IGNORE ERRORS
MOVSI T1,UNPCHG ;CLEAR CHANGED FLAG
ANDCAM T1,UNIDES(U) ; IN UDB
POPJ P, ;RETURN
;SUBROUTINE TO WRITE REDUNDANT BLOCKS(HOM,BAT & RIB)
; ENTER WITH F = FILE DATA BLOCK ADR. U = UNIT DATA BLOCK ADR.
; P1 = ADR. OF BLOCK IN CORE. P4 = XWD 1ST. LOG. BLOCK #,2ND. LOG. BLOCK #
; RETURN WITH S = 0 IF NO ERRORS. OTHERWISE IT HAS STANDARD RH ERROR BITS SET
; T2=0 IF NO ERRORS, OTHERWISE RH=-1 IF ERROR ON 2ND. BLOCK & LH=-1 IF ON 1ST.
WRTRUN::SETZM REDERR ;CLEAR OUT ERROR SWITCH
SETOM WHICH ;INDICATE WRITING 1ST. BLOCK
WRTRN1: HLRZM P4,BLKSLF##(P1) ;SAVE THIS BLOCK # IN BLOCK
HLRZ T2,P4 ;GET LOG. BLOCK # TO WRITE
HRLZS P4 ;SETUP P3 FOR BLOCK #2
PUSHJ P,OMNWRT ;GO WRITE OUT BLOCK
PUSHJ P,WRTCHK ;ERROR - GO PRINT MSG.
SETZM WHICH ;INDICATE WRITING 2ND. BLOCK
JUMPN P4,WRTRN1 ;HAVE WE WRITTEN BOTH BLOCKS?
MOVE T2,REDERR ;PICK UP ERROR WORD FOR CHECKING BY CALLER
JUMPE S,CPOPJ1## ;SKIP RETURN IF NO ERRORS
POPJ P, ;EXIT
WRTCHK: MOVEI T1,[ASCIZ .% Hardware write error.]
MOVE T2,P2 ;COPY BLOCK NAME
PJRST RDNMSG ;PRINT MESSAGE AND RETURN
;SUBROUTINE TO READ OR WRITE A BLOCK FOR THE ONCE ONLY & REFRESHER
; ENTER WITH T2 = LOG. BLOCK # TO READ OR WRITE. U = UNIT DATA BLOCK ADR.
; F = FILE DATA BLOCK ADR.
; RETURN WITH S = 0 IF NO ERRORS. OTHERWISE IT HAS STANDARD RH ERROR BITS SET
OMNWRT::SKIPA T3,[MONWRU##] ;GET ADR. OF WRITE RTNE. IN FILSER
OMNRED::MOVEI T3,MONRDU## ;GET ADR. OF READ RTNE. IN FILSER
;(BOTH TO NOT USE THE DISK CACHE)
OMONIO: MOVEI S,0 ;CLEAR S FOR ERROR STATUS CHECKING
PUSHJ P,STORU## ;SETUP DEVUNI FOR MONRED/WRT SINCE IT DOESN'T USE U
MOVE T1,[JRST ONCWAT##] ;SETUP A FAKE PWAIT1
MOVEM T1,PWAIT1##
MOVSI T1,DVDSK ;MAKE SURE THE DDB
IORM T1,DEVMOD(F) ; LOOKS LIKE A DISK
MOVE J,UDBKDB(U) ;RELOAD J
MOVE T1,@ONCMBF ;GET IOWD FOR MONRED/WRT
XCTCPU (UNI,ONCIOX) ;DO I/O
TRO S,IODERR ;OTHER CPU DIDN'T RESPOND
TLZ S,IO ;FOR JUMPE S,WIN
TRNN S,IOIMPM!IODERR!IODTER!IOBKTL ;CHECK FOR ERRORS
AOS (P) ;NO ERRORS - SKIP RETURN
RSPWTC::MOVE T1,PWAITZ## ;RESTORE REAL PWAIT1
MOVEM T1,PWAIT1##
POPJ P,
IFN FTMP,<
;ROUTINE TO DO THE IO FOR THE REFRESHER
;ALWAYS RETURNS CPOPJ1
REFWRT::SKIPA T3,[MONWRU##] ;WRITE NOT USING DISK CACHE
REFRED::MOVEI T3,MONRDU## ;READ NOT USING DISK CACHE
PUSH P,@ONCMBF
MOVEM T1,@ONCMBF ;T1 HAS IOWD FOR THE OPERATION
PUSHJ P,OMONIO ;DO THE IO
JFCL
POP P,@ONCMBF ;RE@ONCMBF
PJRST CPOPJ1## ;AND RETURN
>
SUBTTL CPU DEPENDANT ROUTINES
; CHECK ON/OFF-LINE STATUS OF A KONTROLLER
; CALL: PUSHJ P,CHKKON
; <NON-SKIP> ;OFF-LINE
; <SKIP> ;ON-LINE, T1 ZERO IF WRITE-HEADER-LOCKOUT OFF
CHKKON: SETZ T1, ;ASSUME WHL ON
SKIPE .UONCE## ;USER MODE?
AOJA T1,CPOPJ1## ;KONTROLLER ALWAYS ALIVE
PUSHJ P,@KONUPA(J) ;IS KONTROLLER UP?
POPJ P, ;NO--DOWN
JRST CPOPJ1## ;RETURN
; SUBROUTINE TO CHECK WRITE-LOCKED STATUS OF A UNIT
; RETURNS CPOPJ1 IF WRITE-LOCKED.
;
CHKWLK: SKIPE .UONCE## ;USER MODE?
JRST UCKWLK## ;YES
PUSHJ P,@KONHWP(J) ;CHECK UNIT
POPJ P, ;WRITE-ENABLED
JRST CPOPJ1## ;WRITE-LOCKED
; CHECK THE CAPACITY OF A DISK UNIT
; CALL: PUSHJ P,CHKCPY
; <NON-SKIP> ;ERRORS: OFF-LINE, NO SUCH UNIT, ILLEGAL SECTOR
; <SKIP> ;T1 THROUGH T4 LOADED BY KONCPY ROUTINE
;
CHKCPY: SKIPE .UONCE## ;USER MODE?
JRST UCKCPY## ;DO IT THE HARD WAY
PUSHJ P,@KONCPY(J) ;CRANK UP FILSER
POPJ P, ;ERRORS
JRST CPOPJ1## ;RETURN
; PERFORM I/O
; CALL: PUSHJ P,ONCIOX
;
; *** NOTE *** THIS ROUTINE WILL ALWAYS SKIP!
;
ONCIOX: SKIPN .UONCE## ;NO PI STUFF IN USER MODE (TWICE)
CONO PI,PI.ON ;MAKE SURE THE PI SYSTEM IS ON FOR ONCWAT
PUSHJ P,(T3) ;DO I/O
JRST CPOPJ1## ;RETURN
IFN FTCIDSK,<
;ROUTINE TO DO AN ONLINE OF A CI DISK
;CALL:
; J/ KDB ADDRESS
; U/ UDB ADDRESS
;RETURN:
; CPOPJ IF ERROR
; CPOPJ1 IF SUCCESS
ONCONL: SETZM ONLDON ;START AFRESH
PUSHJ P,SAVE4## ;SAVE SOME AC'S AGAINST CORRUPTION
SE1ENT ;ENSURE WE RUN IN NZS
HRRZ P4,J ;GET KDB ADDRESS
ADD P4,.CPCPN## ;OFFSET BY OUR CPU NUMBER
MOVE P4,RAKCTI##(P4) ;GET THE CONNECT TABLE INDEX
PUSHJ P,MSCGBF## ;GET A BUFFER TO USE
POPJ P, ;NONE AVAILABLE?
HLLZ T1,ONLFLG ;GET FLAGS FROM LAST ONLINE END PACKET
PUSHJ P,REVFUL## ;PUT THEM BACK AS THE HSC WANTS THEM
MOVEM T1,P.UNFL(P2) ;STORE FLAGS
MOVE T1,UDBPDN(U) ;PHYSICAL DRIVE NUMBER
MOVEI R,.RROON ;RECALL CODE
PUSHJ P,MSCUON## ;DO A UNIT ONLINE
MOVSI T1,3*ONCTIM## ;WAIT A WHILE
SKIPN ONLDON ;DID IT COMPLETE YET?
SOJG T1,.-1 ;NO, WAIT A WHILE LONGER
JUMPG T1,CPOPJ1## ;SKIP RETURN IF IT SUCCEEDED
POPJ P, ;RETURN
ONLDON::0 ;SET NON-ZERO WHEN RAXKON GETS A RESPONSE TO
; A SET UNIT ONLINE COMMAND TO THE HSC
ONLFLG::0 ;FLAGS FROM LAST UNIT ONLINE COMMAND
>; END IFN FTCIDSK
SUBTTL DATA STORAGE
TMPSWB: BLOCK 1 ;TEMPORARY SWAP BLOCK NUMBER
TMPSWM: BLOCK 1 ;TEMPORARY MINIMUM SWAP BLOCK NUMBER
ONCMBF::BLOCK 1 ;ADDRESS OF MONITOR BUFFER FOR ONCE/TWICE
MONBUF: BLOCK 200 ;STORAGE FOR MONITOR BUFFER
ERRHOM: 0 ;FLAG FOR ERRORS WHILE READING A "HOME" BLOCK
SERIUS: 0 ;-1 WHEN IF START SYSTEM EVEN IF QUICK OPTION
ONCDDB: BLOCK 1 ;ADDRESS OF ONCE-ONLY DDB
BATFLG: BLOCK 1 ;NON-ZERO WE WANT TO LOOK AT BAD REGIONS
BLURBF: BLOCK 1 ;NON-ZERO IF DIALOGUE BLURB TYPED
UNITFL: BLOCK 1 ;NON-ZERO IF CHANGING UNITS WITH STR
SUDTAB: BLOCK ^D36 ;STRUCTURE/UNIT/DISK-SET NAME TABLE
POSTAB: BLOCK ^D36 ;STRUCTURE/UNIT/DISK-SET POSITION TABLE
XLIST
LIT
VAR
LIST
ONCEND: END