Trailing-Edge
-
PDP-10 Archives
-
BB-D868C-BM
-
4-documentation/ovrlay.pco
There are 7 other files named ovrlay.pco in the archive. Click here to see a list.
Digital Equipment Corporation 28-AUG-79 Page 1
PCO Log Report
*********************
*PCO #:20-OVRLAY-002*
*********************
[Program Data] System: LINK
Component:OVRLAY
[Validity] 4(37)
[Date Entered] 20-SEP-78
[Programmer] D. NEFF
[Routines] CHKDDT
[Key Words] NO SYM TBL
[Source Before Edit] %4 (000037)
[Source After Edit] %4A (000040)
[Test File Data] : [ ]
[Miscellaneous] DOC changes: N
SER/SPR Number:20-NONE
Critical: N
************************************************************************
[Notes]
Digital Equipment Corporation 28-AUG-79 Page 2
PCO Log Report
[PCO Write-up]
**********
[SYMPTOM]
When debugging an overlaid program with symbols, the symbol
table can disappear after a link is brought in.
**********
[DIAGNOSIS]
As links are deleted and brought in, the overlay handler also
maintains the symbol table to reflect the links currently in
memory. This also involves maintaining the JOBDAT symbol table
pointer, .JBSYM, as the symbol table moves around. However, DDT
does not look at .JBSYM, but only believes its own internal symbol
table pointer. Therefore, even though the overlay handler properly
updates .JBSYM, DDT never notices it.
**********
[CURE]
Until there is a standard for the location of the symbol table
pointer, do what the EXEC does when it brings in DDT -- track down
DDT's internal symbol table pointer and change it whenever .JBSYM
is updated in the overlay handler.
Digital Equipment Corporation 28-AUG-79 Page 3
PCO Log Report
[FILCOM]
File 1) LINK:OVRLAY.MAC[30,4507] created: 2101 04-Mar-1978
File 2) LINK:OVRLAY.MAC[10,645063] created: 2152 15-Sep-1978
1)2 SUBTTL D.M.NIXON/DMN/JLd/JNG/MCHC 27-FEB-78
1) CUSTVR==0 ;CUSTOMER VERSION
1) DECVER==4 ;DEC VERSION
1) DECMVR==0 ;DEC MINOR VERSION
1) DECEVR==37 ;DEC EDIT VERSION
1) ENTRY .OVRLA,.OVRLU
****
2)2 SUBTTL D.M.NIXON/DMN/JLd/JNG/MCHC/DZN 15-Sep-78
2) CUSTVR==0 ;CUSTOMER VERSION
2) DECVER==4 ;DEC VERSION
2) DECMVR==1 ;DEC MINOR VERSION
2) DECEVR==40 ;DEC EDIT VERSION
2) ENTRY .OVRLA,.OVRLU
**************
1)3 IFN FTENEX,<SEARCH MONSYM
1) FTKI10==-1
****
2)3 IFN FTENEX,<SEARCH MACSYM, MONSYM
2) FTKI10==-1
**************
1)6 SUBTTL DEFINITIONS
****
2)5 ;START OF VERSION 4A
2) ;40 DZN 15-Sep-78
2) ; On TOPS-20, if DDT exists, set its internal symbol table
pointer
2) ; whenever we change .JBSYM.
2)6 SUBTTL DEFINITIONS
**************
1)20 IFN FTRELOC,<
****
2)20 ;**;[40] Insert after GTSYM+24L DZN 15-Sep-78
2) IFN FTENEX,<
2) PUSHJ P,CHKDDT ;[40] STORE S.T. PTR IN DDT IF I
T'S THERE
2) >
2) IFN FTRELOC,<
**************
1)24 ADJSYM: ADDM T0,.JBSYM## ;
1) MOVE T1,FSTLNK ;MUST DO SAME FOR ALL LINKS IN C
ORE
****
2)24 ADJSYM: ADDM T0,.JBSYM## ;
2) ;**;[40] Insert after ADJSYM DZN 15-Sep-78
2) IFN FTENEX,<
2) PUSHJ P,CHKDDT ;[40] STORE S.T. PTR IN DDT IF I
T'S THERE
Digital Equipment Corporation 28-AUG-79 Page 4
PCO Log Report
2) >
2) MOVE T1,FSTLNK ;MUST DO SAME FOR ALL LINKS IN C
ORE
**************
1)27 MOVEI L,1+[-5,,0 ;ARG LIST
****
2)27 ;**;[40] Insert after GBSYM+8L DZN 15-Sep-78
2) IFN FTENEX,<
2) PUSHJ P,CHKDDT ;[40] STORE S.T. PTR IN DDT IF I
T'S THERE
2) >
2) MOVEI L,1+[-5,,0 ;ARG LIST
**************
1)43 SKIPN T1,PS.RDX ;GET POINTER
****
2)43 ;**;[40] Insert after OVINI3+1P2L DZN 15-Sep-78
2) IFN FTENEX,<
2) PUSHJ P,CHKDDT ;[40] STORE S.T. PTR IN DDT IF I
T'S THERE
2) >
2) SKIPN T1,PS.RDX ;GET POINTER
**************
1)43 SUBI T0,1 ;IOWD IS 1 LESS
****
2)43 ;**;[40] Insert after OVINI4+15L DZN 15-Sep-78
2) IFN FTENEX,<
2) PUSHJ P,CHKDDT ;[40] STORE S.T. PTR IN DDT IF I
T'S THERE
2) >
2) SUBI T0,1 ;IOWD IS 1 LESS
**************
1)44 SUBTTL INIT & LOOKUP
****
2)44 ;**;[40] Insert after POPL+2L DZN 15-Sep-78
2) ;ROUTINE TO STUFF C(.JBSYM) INTO DDT IF DDT IS IN MEMORY (TOPS-2
0 ONLY).
2) ;THIS IS BECAUSE DDT DOESN'T LOOK FOR SYMBOL TABLES IN JOBDAT, B
UT MUST
2) ;BE FORCE-FED. SAVES ALL ACS.
2) IFN FTENEX,<
2) CHKDDT: PUSH P,T1 ;[40] SAVE SOME TEMPS
2) PUSH P,T2 ;[40] ..
2) MOVX T1,<.FHSLF,,770>;[40] SEE IF PAGE 770 EXISTS
2) RPACS ;[40] ..
2) TXNN T2,PA%EX ;[40] ..
2) JRST CHKEND ;[40] NO--CAN'T BE STANDARD DDT
2) MOVE T1,770000 ;[40] SEE IF IT'S DDT THAT'S THE
RE
2) CAME T1,[JRST 770002];[40] CROCK, BUT THIS IS WHAT EX
Digital Equipment Corporation 28-AUG-79 Page 5
PCO Log Report
EC DOES
2) JRST CHKEND ;[40] NOT DDT
2) MOVE T1,.JBSYM## ;[40] IT'S DDT--STORE S.T. POINT
ER
2) MOVEM T1,@770001 ;[40] IN STANDARD PLACE
2) CHKEND: POP P,T2 ;[40] RESTORE TEMPS
2) POP P,T1 ;[40] ..
2) POPJ P, ;[40] DONE
2) >
2)45 SUBTTL INIT & LOOKUP
**************
[End PCO Write-up]
Digital Equipment Corporation 28-AUG-79 Page 6
PCO Log Report
*********************
*PCO #:20-OVRLAY-003*
*********************
[Program Data] System: LINK
Component:OVRLAY
[Validity] 4(37) TESTED IN 4A(40)
[Date Entered] 01-NOV-78
[Programmer] D. NEFF
[Routines] ALL!
[Key Words] JSYS NAMES
[Source Before Edit] %4A (000040)
[Source After Edit] %4A (000041)
[Test File Data] : [ ]
[Miscellaneous] DOC changes: N
SER/SPR Number:20-11873
Critical: N
************************************************************************
[Notes]
Digital Equipment Corporation 28-AUG-79 Page 7
PCO Log Report
[PCO Write-up]
**********
[SYMPTOM]
Multiply defined globals or run-time errors result with LINK
overlays when FORLIB routines with the same names as JSYS names are
called.
**********
[DIAGNOSIS]
This error results because the JSYS names are defined in MONSYM as
global symbols, and are not defined with the usual . or % in the
name to avoid such conflicts. Subsequent use of these JSYS names
by the overlay handler cause the conflicts with the similarly named
FORLIB subroutines.
**********
[CURE]
Make JSYS names be of the form NAME%, then change the overlay
handler to use the new names. The JSYS name change is addressed in
a separate patch to MONSYM.MAC, which is attached. The patch
directly below then changes the overlay handler to use the new
names. Note that sites wishing to save themselves a lot of work
may simply change over the names of just those JSYSes that cause
the conflicts.
Digital Equipment Corporation 28-AUG-79 Page 8
PCO Log Report
[FILCOM]
File 1) LINK:OVRLAY.MAC[30,4507] created: 2152 15-Sep-1978
File 2) LINK:OVRLAY.MAC[10,645063] created: 1612 01-Nov-1978
1)2 SUBTTL D.M.NIXON/DMN/JLd/JNG/MCHC/DZN 15-Sep-78
1) CUSTVR==0 ;CUSTOMER VERSION
****
2)2 SUBTTL D.M.NIXON/DMN/JLd/JNG/MCHC/DZN 5-Oct-78
2) CUSTVR==0 ;CUSTOMER VERSION
**************
1)2 DECEVR==40 ;DEC EDIT VERSION
1) ENTRY .OVRLA,.OVRLU
****
2)2 DECEVR==41 ;DEC EDIT VERSION
2) ENTRY .OVRLA,.OVRLU
**************
1)6 SUBTTL DEFINITIONS
****
2)5 ;41 DZN 5-Oct-78
2) ; Use new NAME% form of JSYS names to avoid conflicts with
user-defined
2) ; globals.
2)6 SUBTTL DEFINITIONS
**************
1)8 PSOUT
1) >>
****
2)8 ;;**;[41] Replace in TYPE macro DZN 5-Oct-78
2) PSOUT% ;;[41]
2) >>
**************
1)8 PBOUT
1) >>
****
2)8 ;;**;[41] Replace in TYPEC macro DZN 5-Oct-78
2) PBOUT% ;;[41]
2) >>
**************
1)8 HALTF
1) JRST .-1;; ;;HALTF IS CONTINUABLE
1) >
****
2)8 ;;**;[41] Replace in STOP macro DZN 5-Oct-78
2) HALTF% ;;[41]
2) JRST .-1;; ;;[41] HALTF% IS CONTINUABLE
2) >
**************
1)40 RPACS ;READ ACCESSABILITY
1) ERJMP .ERRPA
****
2)40 ;**;[41] Replace @OVINI+1P19L DZN 5-Oct-78
Digital Equipment Corporation 28-AUG-79 Page 9
PCO Log Report
2) RPACS% ;[41] READ ACCESSABILITY
2) ERJMP .ERRPA
**************
1)40 RMAP ;JFN FROM WHENCE WE CAME
1) ERJMP .ERRMP
****
2)40 ;**;[41] Replace @OVINI+1P23L DZN 5-Oct-78
2) RMAP% ;[41] JFN FROM WHENCE WE CAME
2) ERJMP .ERRMP
**************
1)40 MOVEM 1,STRPTR ;FOR GTJFN
1) MOVE 3,[1B2+1B5+1B8+1B35] ;DEVICE:<DIRECTORY>NAME
1) JFNS
1) >;END IFN FTENEX
****
2)40 ;**;[41] Change @OVINI+1P27L DZN 5-Oct-78
2) MOVEM 1,STRPTR ;[41] FOR GTJFN%
2) MOVE 3,[1B2+1B5+1B8+1B35] ;DEVICE:<DIRECTORY>NAME
2) JFNS% ;[41]
2) >;END IFN FTENEX
**************
1)41 GTJFN
1) JRST .ERGJF
****
2)41 ;**;[41] Replace @OVINI+2P17L DZN 5-Oct-78
2) GTJFN% ;[41]
2) JRST .ERGJF
**************
1)41 OPENF
1) JRST .EROPF
****
2)41 ;**;[41] Replace @OVINI+2P21L DZN 5-Oct-78
2) OPENF% ;[41]
2) JRST .EROPF
**************
1)44 RPACS ;[40] ..
1) TXNN T2,PA%EX ;[40] ..
****
2)44 ;**;[41] Replace @CHKDDT+3L DZN 5-Oct-78
2) RPACS% ;[41] ..
2) TXNN T2,PA%EX ;[40] ..
**************
1)47 SFPTR ;SET INPUT PTR
1) JRST .ERSFP
****
2)47 ;**;[41] Replace @%USETI%4L DZN 5-Oct-78
2) SFPTR% ;[41] SET INPUT PTR
2) JRST .ERSFP
**************
Digital Equipment Corporation 28-AUG-79 Page 10
PCO Log Report
1)47 SIN
1) ERJMP .ERIST
****
2)47 ;**;[41] Replace @%INZ+5L DZN 5-Oct-78
2) SIN% ;[41]
2) ERJMP .ERIST
**************
1)65 TYPE (<SFP SFPTR JSYS failed>)
1) PUSHJ P,JSYSER
****
2)65 ;**;[41] Replace @.ERSFP+1L DZN 5-Oct-78
2) TYPE (<SFP SFPTR% JSYS failed>)
2) PUSHJ P,JSYSER
**************
1)65 TYPE (<RPA RPACS JSYS failed>)
1) PUSHJ P,JSYSER
****
2)65 ;**;[41] Replace @.ERRPA+1L DZN 5-Oct-78
2) TYPE (<RPA RPACS% JSYS failed>)
2) PUSHJ P,JSYSER
**************
1)65 TYPE (<RMP RMAP JSYS failed>)
1) PUSHJ P,JSYSER
****
2)65 ;**;[41] Replace @.ERRMP+1L DZN 5-Oct-78
2) TYPE (<RMP RMAP% JSYS failed>)
2) PUSHJ P,JSYSER
**************
1)65 TYPE (<GJF GTJFN JSYS failed>)
1) PUSHJ P,JSYSER
****
2)65 ;**;[41] Replace @.ERGJF+1L DZN 5-Oct-78
2) TYPE (<GJF GTJFN% JSYS failed>)
2) PUSHJ P,JSYSER
**************
1)65 TYPE (<OPF OPENF JSYS failed>)
1) PUSHJ P,JSYSER
****
2)65 ;**;[41] Replace @.EROPF+1L DZN 5-Oct-78
2) TYPE (<OPF OPENF% JSYS failed>)
2) PUSHJ P,JSYSER
**************
1)66 PBOUT
1) POP P,T1
****
2)66 ;**;[41] Replace @PRNT0+11L DZN 5-Oct-78
2) PBOUT% ;[41]
2) POP P,T1
**************
Digital Equipment Corporation 28-AUG-79 Page 11
PCO Log Report
1)67 PSOUT
1) HRROI 1,INBFR ;WHERE TO STORE STRING
****
2)67 ;**;[41] Replace @JSYSER+2L DZN 5-Oct-78
2) PSOUT% ;[41]
2) HRROI 1,INBFR ;WHERE TO STORE STRING
**************
1)67 ERSTR
1) POPJ P, ;TOO BAD
****
2)67 ;**;[41] Replace @JSYSER+6L DZN 5-Oct-78
2) ERSTR% ;[41]
2) POPJ P, ;TOO BAD
**************
1)67 PSOUT ;GIVE IT TO THE USER
1) POPJ P,
****
2)67 ;**;[41] Replace @JSYSER+10L DZN 5-Oct-78
2) PSOUT% ;[41] GIVE IT TO THE USER
2) POPJ P,
**************
1)71 GTJFN
1) JRST .ERGJF
****
2)71 ;**;[41] Replace @$ENTER+18L DZN 5-Oct-78
2) GTJFN% ;[41]
2) JRST .ERGJF
**************
1)71 OPENF
1) JRST .EROPF
****
2)71 ;**;[41] Replace @$ENTER+22L DZN 5-Oct-78
2) OPENF% ;[41]
2) JRST .EROPF
**************
1)72 CLOSF
1) JFCL
****
2)72 ;**;[41] Replace @$CLOSE+24L DZN 5-Oct-78
2) CLOSF% ;[41]
2) JFCL
**************
1)74 PSOUT ;OUTPUT IT
1) >
****
2)74 ;**;[41] Replace @LOGTST+8L DZN 5-Oct-78
2) PSOUT% ;[41] OUTPUT IT
2) >
**************
Digital Equipment Corporation 28-AUG-79 Page 12
PCO Log Report
1)75 SOUT
1) ERJMP .EROEL
****
2)75 ;**;[41] Replace @LOGIT+5L DZN 5-Oct-78
2) SOUT% ;[41]
2) ERJMP .EROEL
**************
1)75 BOUT
1) ERJMP .EROEL
****
2)75 ;**;[41] Replace @LOGCHR+3L DZN 5-Oct-78
2) BOUT% ;[41]
2) ERJMP .EROEL
**************
1)76 RUNTM
1) MOVE T0,1
****
2)76 ;**;[41] Replace @TIME+7L DZN 5-Oct-78
2) RUNTM% ;[41]
2) MOVE T0,1
**************
1)77 GCVEC ;SO WON'T DRAG IT IN IF NOT
1) MOVE T1,.JBSA## ;RESTORE AC 1 FOR DISPATCH
1) SKIPE 2 ;GCVEC RETURNS 2=0 IF PAT NOT AR
OUND
1) >;END IFN FTENEX
****
2)77 ;**;[41] Replace @RESTART+18L DZN 5-Oct-78
2) GCVEC% ;[41] SO WON'T DRAG IT IN IF NOT
2) MOVE T1,.JBSA## ;RESTORE AC 1 FOR DISPATCH
2) SKIPE 2 ;[41] GCVEC% RETURNS 2=0 IF PAT
NOT AROUND
2) >;END IFN FTENEX
**************
1)78 GJF GTJFN JSYS failed
1) IAT Illegal argument type on call to [subroutine]
****
2)78 GJF GTJFN% JSYS failed
2) IAT Illegal argument type on call to [subroutine]
**************
1)78 OPF OPENF JSYS failed
1) OPP Overlay handler in private page
****
2)78 OPF OPENF% JSYS failed
2) OPP Overlay handler in private page
**************
1)78 RMP RMAP JSYS failed
1) RPA RPACS JSYS failed
1) SFP SFPTR JSYS failed
Digital Equipment Corporation 28-AUG-79 Page 13
PCO Log Report
1) STS OTS reserved space too small
****
2)78 RMP RMAP% JSYS failed
2) RPA RPACS% JSYS failed
2) SFP SFPTR% JSYS failed
2) STS OTS reserved space too small
**************
[End PCO Write-up]
Digital Equipment Corporation 28-AUG-79 Page 14
PCO Log Report
*********************
*PCO #:20-OVRLAY-004*
*********************
[Program Data] System: LINK
Component:OVRLAY
[Validity] 4(37) TESTED IN 4A(41)
[Date Entered] 02-NOV-78
[Programmer] D. NEFF
[Routines] ALL!
[Key Words] FTENEX CND
[Source Before Edit] %4A (000041)
[Source After Edit] %4A (000042)
[Test File Data] : [ ]
[Miscellaneous] DOC changes: N
SER/SPR Number:20-NONE
Critical: N
************************************************************************
[Notes]
Digital Equipment Corporation 28-AUG-79 Page 15
PCO Log Report
[PCO Write-up]
**********
[SYMPTOM]
The overlay handler does not have the same conditional names as the
rest of LINK. In particular, OVRLAY.MAC uses the FTENEX
conditional name rather than TOPS20 which the rest of LINK uses.
Also, the overlay handler does not use mnemonics for JSYS
arguments, making the code harder to read.
**********
[DIAGNOSIS]
OVRLAY.MAC was missed when the FTENEX conditional name was changed
to TOPS20 in the rest of LINK.
**********
[CURE]
Use TOPS20 as the conditional name rather than FTENEX, and use the
proper mnemonics for JSYS arguments.
Digital Equipment Corporation 28-AUG-79 Page 16
PCO Log Report
[FILCOM]
File 1) LINK:OVRLAY.MAC[30,4507] created: 1612 01-Nov-1978
File 2) LINK:OVRLAY.MAC[10,645063] created: 1758 01-Nov-1978
1)2 SUBTTL D.M.NIXON/DMN/JLd/JNG/MCHC/DZN 5-Oct-78
1) CUSTVR==0 ;CUSTOMER VERSION
****
2)2 SUBTTL D.M.NIXON/DMN/JLd/JNG/MCHC/DZN 13-Oct-78
2) CUSTVR==0 ;CUSTOMER VERSION
**************
1)2 DECEVR==41 ;DEC EDIT VERSION
1) ENTRY .OVRLA,.OVRLU
****
2)2 DECEVR==42 ;DEC EDIT VERSION
2) ENTRY .OVRLA,.OVRLU
**************
1)3 FTENEX==0 ;-1 = TENEX VERSION
1) FT2SEG==-1 ;-1 = TWO SEGMENT VERSION
****
2)3 TOPS20==0 ;-1 = TOPS-20 VERSION
2) FT2SEG==-1 ;-1 = TWO SEGMENT VERSION
**************
1)3 IFNDEF FTENEX,<FTENEX==0>
1) IFNDEF FT2SEG,<FT2SEG==-1>
****
2)3 IFNDEF TOPS20,<TOPS20==0>
2) IFNDEF FT2SEG,<FT2SEG==-1>
**************
1)3 IFE FTENEX,<SEARCH UUOSYM ;GET STANDARD DEFINITION
S
1) >
1) IFN FTENEX,<SEARCH MACSYM, MONSYM
1) FTKI10==-1
****
2)3 IFE TOPS20,<SEARCH MACTEN, UUOSYM ;GET STANDARD DEFINITION
S
2) >
2) IFN TOPS20,<SEARCH MACSYM, MONSYM ;GET STANDARD DEFINITION
S
2) FTKI10==-1
**************
1)6 SUBTTL DEFINITIONS
1) ;ACCUMULATORS
1) T0=0
1) T1=1
****
2)6 ;42 DZN 5-Oct-78
2) ; Change FTENEX conditional to TOPS20 to be consistent wit
h the rest
2) ; of LINK. Use proper mnemonics for JSYS arguments. Some c
ode cleanup.
Digital Equipment Corporation 28-AUG-79 Page 17
PCO Log Report
2)7 SUBTTL DEFINITIONS
2) ;ACCUMULATORS
2) ;**;[42] Change @T0 DZN 5-Oct-78
2) T0=0 ;[42] T0-T5 MUST BE 0-5 FOR JSYS
ARGS
2) T1=1
**************
1)8 IFE FTENEX,<
1) OUTSTR [ASCIZ \MESSAGE\]
1) >
1) IFN FTENEX,<
1) HRROI 1,[ASCIZ \MESSAGE\]
1) ;;**;[41] Replace in TYPE macro DZN 5-Oct-78
1) PSOUT% ;;[41]
****
2)9 ;;**;[42] Change in TYPE macro DZN 5-Oct-78
2) IFE TOPS20,<
2) OUTSTR [ASCIZ \MESSAGE\]
2) >
2) IFN TOPS20,<
2) HRROI T1,[ASCIZ \MESSAGE\]
2) PSOUT% ;;[41]
**************
1)8 IFE FTENEX,<
1) MOVEI T1,CHAR
****
2)9 ;;**;[42] Change in TYPEC macro DZN 5-Oct-78
2) IFE TOPS20,<
2) MOVEI T1,CHAR
**************
1)8 IFN FTENEX,<
1) HRROI 1,CHAR
1) ;;**;[41] Replace in TYPEC macro DZN 5-Oct-78
1) PBOUT% ;;[41]
****
2)9 IFN TOPS20,<
2) MOVEI T1,CHAR ;;[42]
2) PBOUT% ;;[41]
**************
1)8 IFE FTENEX,<
1) OPDEF STOP [EXIT]
1) >
1) IFN FTENEX,<
1) DEFINE STOP<
1) ;;**;[41] Replace in STOP macro DZN 5-Oct-78
1) HALTF% ;;[41]
1) JRST .-1;; ;;[41] HALTF% IS CONTINUABLE
1) >
1) >
Digital Equipment Corporation 28-AUG-79 Page 18
PCO Log Report
1) OPDEF PJRST [JRST]
****
2)9 ;**;[42] Replace before STOP OPDEF DZN 5-Oct-78
2) IFE TOPS20,<
2) OPDEF STOP [EXIT]
2) >
2) IFN TOPS20,<
2) DEFINE STOP<
2) HALTF% ;;[41]
2) JRST .-1;; ;;[41] HALTF% IS CONTINUABLE
2) >
2) >
2) OPDEF PJRST [JRST]
**************
1)18 IFE FTENEX,<
1) ;HERE WITH ALL LINKS AND SYMBOLS IN CORE.
****
2)19 ;**;[42] Replace @CP5A+1P0L DZN 5-Oct-78
2) IFE TOPS20,<
2) ;HERE WITH ALL LINKS AND SYMBOLS IN CORE.
**************
1)19 >;END IFE FTENEX
1) IFN FTENEX,<
1) CP6:>
****
2)20 ;**;[42] Replace @CP6+6L DZN 5-Oct-78
2) >;END IFE TOPS20
2) IFN TOPS20,<
2) CP6:>
**************
1)20 ;**;[40] Insert after GTSYM+24L DZN 15-Sep-78
1) IFN FTENEX,<
1) PUSHJ P,CHKDDT ;[40] STORE S.T. PTR IN DDT IF I
T'S THERE
****
2)21 ;**;[42] Replace @GTSYM+24L DZN 5-Oct-78
2) IFN TOPS20,<
2) PUSHJ P,CHKDDT ;[40] STORE S.T. PTR IN DDT IF I
T'S THERE
**************
1)24 ;**;[40] Insert after ADJSYM DZN 15-Sep-78
1) IFN FTENEX,<
1) PUSHJ P,CHKDDT ;[40] STORE S.T. PTR IN DDT IF I
T'S THERE
****
2)25 ;**;[42] Replace @ADJSYM DZN 5-Oct-78
2) IFN TOPS20,<
2) PUSHJ P,CHKDDT ;[40] STORE S.T. PTR IN DDT IF I
T'S THERE
Digital Equipment Corporation 28-AUG-79 Page 19
PCO Log Report
**************
1)27 ;**;[40] Insert after GBSYM+8L DZN 15-Sep-78
1) IFN FTENEX,<
1) PUSHJ P,CHKDDT ;[40] STORE S.T. PTR IN DDT IF I
T'S THERE
****
2)28 ;**;[42] Replace @GBSYM+8L DZN 5-Oct-78
2) IFN TOPS20,<
2) PUSHJ P,CHKDDT ;[40] STORE S.T. PTR IN DDT IF I
T'S THERE
**************
1)39 IFE FTENEX,<
1) MOVE T0,[115,,11] ;GET PAGESIZE
1) GETTAB T0, ;FROM MONITOR
****
2)40 ;**;[42] Replace @OVINI+3L DZN 5-Oct-78
2) IFE TOPS20,<
2) MOVX T0,%CNPGS ;[42] GET PAGE SIZE
2) GETTAB T0, ;FROM MONITOR
**************
1)39 IFN FTENEX,<
1) DMOVEM 2,TEMP2 ;SAVE THE ACCS
1) MOVEI T0,1000 ;WE KNOW ITS PAGES
****
2)40 ;**;[42] Replace @OVINI+8L DZN 5-Oct-78
2) IFN TOPS20,<
2) DMOVEM T2,TEMP2 ;[42] SAVE THE ACCS
2) MOVEI T0,1000 ;WE KNOW ITS PAGES
**************
1)39 IFE FTENEX,<
1) MOVEI L,1+[-4,,0 ;ARG LIST FOR GET CHAN F
NCT
****
2)40 ;**;[42] Replace @OVINI+22L DZN 12-Oct-78
2) IFE TOPS20,<
2) MOVEI L,1+[-4,,0 ;ARG LIST FOR GET CHAN F
NCT
**************
1)40 >;END IFE FTENEX
1) IFN FTENEX,<
1) SKIPE STRPTR ;STRING SETUP?
1) JRST OVINI1 ;YES
1) MOVEI 1,OVRL1+1000 ;A PURE PAGE
1) LSH 1,-9 ;IN THE MIDDLE OF OVRLAY
1) HRLI 1,400000 ;THIS FORK
1) ;**;[41] Replace @OVINI+1P19L DZN 5-Oct-78
1) RPACS% ;[41] READ ACCESSABILITY
1) ERJMP .ERRPA
1) TLNE 2,(1B10) ;PRIVATE?
Digital Equipment Corporation 28-AUG-79 Page 20
PCO Log Report
1) JRST .EROPP ;TOO BAD
****
2)41 ;**;[42] Replace @OVINI+1P12L DZN 12-Oct-78
2) >;END IFE TOPS20
2) IFN TOPS20,<
2) SKIPE STRPTR ;STRING SETUP?
2) JRST OVINI1 ;YES
2) MOVEI T1,OVRL1+1000 ;[42] SEE IF A PURE PAGE IN THE
2) LSH T1,-9 ;[42] MIDDLE OF OVRLAY IS
2) HRLI T1,.FHSLF ;[42] SHARABLE
2) RPACS% ;[41] READ ACCESSABILITY
2) ERJMP .ERRPA
2) TXNE T2,PA%PRV ;[42] PRIVATE?
2) JRST .EROPP ;TOO BAD
**************
1)40 HLRZ 2,1 ;JFN
1) MOVE 1,[POINT 7,INBFR] ;WHERE TO STORE IT
1) ;**;[41] Change @OVINI+1P27L DZN 5-Oct-78
1) MOVEM 1,STRPTR ;[41] FOR GTJFN%
1) MOVE 3,[1B2+1B5+1B8+1B35] ;DEVICE:<DIRECTORY>NAME
1) JFNS% ;[41]
1) >;END IFN FTENEX
1)41 OVINI1: MOVSI T1,(MOVE T0,JT.FLG(T1))
1) MOVEM T1,.OVRLA ;REPLACE INST
****
2)41 ;**;[42] Replace @OVINI+1P27L DZN 12-Oct-78
2) HLRZ T2,T1 ;[42] JFN
2) HRROI T1,INBFR ;[42] WHERE TO STORE IT
2) MOVEM T1,STRPTR ;[42] FOR GTJFN%
2) MOVX T3,<<FLD .JSAOF,JS%DEV>!<FLD .JSAOF,JS%DIR>!^_
2) <FLD .JSAOF,JS%NAM>!JS%PAF> ;[42] DEV:<DIR>N
AME
2) JFNS% ;[41]
2) >;END IFN TOPS20
2)42 OVINI1: MOVX T1,<MOVE T0,JT.FLG(T1)> ;[42]
2) MOVEM T1,.OVRLA ;REPLACE INST
**************
1)41 IFE FTENEX,<
1) PUSHJ P,%INIT ;DO INIT & LOOKUP
1) >
1) IFN FTENEX,<
1) MOVEI T1,[ASCIZ /OVL/]
****
2)42 ;**;[42] Replace @OVINI1+7L DZN 12-Oct-78
2) IFE TOPS20,<
2) PUSHJ P,%INIT ;DO INIT & LOOKUP
2) >
2) IFN TOPS20,<
2) MOVEI T1,[ASCIZ /OVL/]
Digital Equipment Corporation 28-AUG-79 Page 21
PCO Log Report
**************
1)41 MOVEI 1,DEFTBL
1) MOVE 2,STRPTR
1) ;**;[41] Replace @OVINI+2P17L DZN 5-Oct-78
1) GTJFN% ;[41]
1) JRST .ERGJF
1) HRRZM 1,JFN ;SAVE THE JFN
1) MOVE 2,[44B5+1B19] ;36 BITS INPUT
1) ;**;[41] Replace @OVINI+2P21L DZN 5-Oct-78
1) OPENF% ;[41]
****
2)42 ;**;[42] Replace @IVINI1+15L DZN 12-Oct-78
2) MOVEI T1,DEFTBL ;[42]
2) MOVE T2,STRPTR ;[42]
2) GTJFN% ;[41]
2) JRST .ERGJF
2) HRRZM T1,JFN ;[42] SAVE THE JFN
2) MOVX T2,<<FLD ^D36,OF%BSZ>!OF%RD> ;[42] 36 BITS, FOR
INPUT
2) OPENF% ;[41]
**************
1)42 IFN FTENEX,<
1) DMOVE 2,TEMP2 ;RESTORE THE ACCS
1) >
****
2)43 ;**;[42] Replace @ININI3+7L DZN 12-Oct-78
2) IFN TOPS20,<
2) DMOVE T2,TEMP2 ;[42] RESTORE THE ACCS
2) >
**************
1)43 ;**;[40] Insert after OVINI3+1P2L DZN 15-Sep-78
1) IFN FTENEX,<
1) PUSHJ P,CHKDDT ;[40] STORE S.T. PTR IN DDT IF I
T'S THERE
****
2)44 ;**;[42] Insert after OVINI3+1P3L DZN 12-Oct-78
2) IFN TOPS20,<
2) PUSHJ P,CHKDDT ;[40] STORE S.T. PTR IN DDT IF I
T'S THERE
**************
1)43 ;**;[40] Insert after OVINI4+15L DZN 15-Sep-78
1) IFN FTENEX,<
1) PUSHJ P,CHKDDT ;[40] STORE S.T. PTR IN DDT IF I
T'S THERE
****
2)44 ;**;[42] Replace @OVINI4+16L DZN 12-Oct-78
2) IFN TOPS20,<
2) PUSHJ P,CHKDDT ;[40] STORE S.T. PTR IN DDT IF I
T'S THERE
**************
1)44 IFN FTENEX,<
Digital Equipment Corporation 28-AUG-79 Page 22
PCO Log Report
1) CHKDDT: PUSH P,T1 ;[40] SAVE SOME TEMPS
****
2)45 ;**;[42] Replace @CHKDDT-1 DZN 12-Oct-78
2) IFN TOPS20,<
2) CHKDDT: PUSH P,T1 ;[40] SAVE SOME TEMPS
**************
1)45 IFE FTENEX,<
1) SEGMENT LOW
****
2)46 ;**;[42] Replace @%INIT-2L DZN 12-Oct-78
2) IFE TOPS20,<
2) SEGMENT LOW
**************
1)46 >;END IFE FTENEX
1)47 SUBTTL JSYS CODE
1) IFN FTENEX,<
1) %USETU: HRRZM T1,UBLOCK ;STORE INCORE BLOCK TO BE
1) %USETI: DMOVEM 1,TEMP2
1) MOVEI 2,-1(1) ;GET BLOCK -1
1) LSH 2,7 ;WORDS
1) MOVE 1,JFN
1) ;**;[41] Replace @%USETI%4L DZN 5-Oct-78
1) SFPTR% ;[41] SET INPUT PTR
1) JRST .ERSFP
1) DMOVE 1,TEMP2
1) POPJ P,
1) %INB: MOVE T0,[IOWD 200,INBFR]
1) %INZ: DMOVEM 2,TEMP2
1) MOVE 1,JFN
1) AOS 2,T0 ;ADDRESS
1) HRLI 2,(POINT 36,) ;BYTE PTR
1) HLRO 3,T0 ;- WORD COUNT
1) ;**;[41] Replace @%INZ+5L DZN 5-Oct-78
1) SIN% ;[41]
1) ERJMP .ERIST
1) DMOVE 2,TEMP2
1) POPJ P,
1) SEGMENT LOW
1) DEFTBL: 1B2
1) 377777,,377777
1) POINT 7,[ASCIZ /DSK/]
****
2)47 ;**;[42] Replace @%OUTPT+7L DZN 12-Oct-78
2) >;END IFE TOPS20
2)48 SUBTTL JSYS CODE
2) IFN TOPS20,<
2) %USETU: HRRZM T1,UBLOCK ;STORE INCORE BLOCK TO BE
2) %USETI: DMOVEM T1,TEMP2 ;[42] SAVE JSYS ACS
2) MOVEI T2,-1(T1) ;[42] GET BLOCK -1
Digital Equipment Corporation 28-AUG-79 Page 23
PCO Log Report
2) LSH T2,7 ;[42] WORDS
2) MOVE T1,JFN ;[42]
2) SFPTR% ;[41] SET INPUT PTR
2) JRST .ERSFP
2) DMOVE T1,TEMP2 ;[42] RESTORE JSYS ACS
2) POPJ P,
2) %INB: MOVE T0,[IOWD 200,INBFR]
2) %INZ: DMOVEM T2,TEMP2 ;[42] SAVE JSYS ACS
2) MOVE T1,JFN ;[42]
2) AOS T2,T0 ;[42] ADDRESS
2) HRLI T2,(POINT 36,) ;[42] BYTE PTR
2) HLRO T3,T0 ;[42] - WORD COUNT
2) SIN% ;[41]
2) ERJMP .ERIST
2) DMOVE T2,TEMP2 ;[42] RESTORE JSYS ACS
2) POPJ P,
2) SEGMENT LOW
2) DEFTBL: GJ%OLD ;[42] FILE MUST EXIST
2) .NULIO,,.NULIO ;[42] DON'T READ FROM ANYWHERE
2) POINT 7,[ASCIZ /DSK/]
**************
1)48 IFE FTENEX,<
1) SKIPN -1(L) ;[31] ANY ARGUMENTS?
****
2)49 ;**;[42] Replace @INIOV.+1L DZN 12-Oct-78
2) IFE TOPS20,<
2) SKIPN -1(L) ;[31] ANY ARGUMENTS?
**************
1)48 IFN FTENEX,<
1) SKIPN -1(L) ;[31] ANY ARGUMENTS?
1) PJRST OVINI ;[31] NO, JUST INITIALIZE
1) MOVE T1,@L ;GET ADDRESS OF ARG STRING
1) HRLI T1,(POINT 7,)
1) MOVEM T1,STRPTR ;SETUP PTR
****
2)49 ;**;[42] Replace @INIOV.+14L DZN 12-Oct-78
2) IFN TOPS20,<
2) SKIPN -1(L) ;[31] ANY ARGUMENTS?
2) PJRST OVINI ;[31] NO, JUST INITIALIZE
2) HRROI T1,@(L) ;[42] GET POINTER TO ARG STRING
2) MOVEM T1,STRPTR ;SETUP PTR
**************
1)50 IFE FTENEX,<
1) MOVEI L,1+[-3,,0 ;ARG LIST
****
2)51 ;**;[42] Replace @REMOV2+1L DZN 12-Oct-78
2) IFE TOPS20,<
2) MOVEI L,1+[-3,,0 ;ARG LIST
**************
Digital Equipment Corporation 28-AUG-79 Page 24
PCO Log Report
1)57 IFE FTENEX,<
1) ;ENTER WITH
****
2)58 ;**;[42] Replace @TY.PTR+1P1L DZN 12-Oct-78
2) IFE TOPS20,<
2) ;ENTER WITH
**************
1)58 >;END IFE FTENEX
1)59 ;GETSBX - ROUTINE TO CONVERT ARG INTO SIXBIT
****
2)59 ;**;[42] Replace @POP2L+2L DZN 12-Oct-78
2) >;END IFE TOPS20
2)60 ;GETSBX - ROUTINE TO CONVERT ARG INTO SIXBIT
**************
1)60 IFE FTENEX,<
1) MOVE T2,[-2,,.GTUPM] ;NEED TO FIND HI-SEG ORIGIN
****
2)61 ;**;[42] Replace @GTCUR2+7L DZN 12-Oct-78
2) IFE TOPS20,<
2) MOVE T2,[-2,,.GTUPM] ;NEED TO FIND HI-SEG ORIGIN
**************
1)63 IFE FTENEX,<
1) .ERDOE: PUSHJ P,FATAL
****
2)64 ;**;[42] Replace @.ERDOE-1L DZN 12-Oct-78
2) IFE TOPS20,<
2) .ERDOE: PUSHJ P,FATAL
**************
1)63 >;END IFE FTENEX
1)64 .ERAOC: PUSHJ P,FATAL
****
2)64 ;**;[42] Replace @.ERCNA+3L DZN 12-Oct-78
2) >;END IFE TOPS20
2)65 .ERAOC: PUSHJ P,FATAL
**************
1)64 IFE FTENEX,<
1) PUSHJ P,%STS
1) >
1) IFN FTENEX,<
1) PUSHJ P,JSYSER
****
2)65 ;**;[42] Replace @.ERIST+2L DZN 12-Oct-78
2) IFE TOPS20,<
2) PUSHJ P,%STS
2) >
2) IFN TOPS20,<
2) PUSHJ P,JSYSER
**************
1)65 IFN FTENEX,<
Digital Equipment Corporation 28-AUG-79 Page 25
PCO Log Report
1) .EROPP: PUSHJ P,FATAL
****
2)66 ;**;[42] Replace @.EROPP-1L DZN 12-Oct-78
2) IFN TOPS20,<
2) .EROPP: PUSHJ P,FATAL
**************
1)66 IFE FTENEX,<
1) SEGMENT LOW
****
2)67 ;**;[42] Replace @%STS-2L DZN 12-Oct-78
2) IFE TOPS20,<
2) SEGMENT LOW
**************
1)66 IFE FTENEX,<
1) OUTCHR T0
1) >
1) IFN FTENEX,<
1) PUSH P,T1
1) HRRO T1,T0
1) ;**;[41] Replace @PRNT0+11L DZN 5-Oct-78
1) PBOUT% ;[41]
****
2)67 ;**;[42] Replace @PRNT0+5L DZN 12-Oct-78
2) IFE TOPS20,<
2) OUTCHR T0
2) >
2) IFN TOPS20,<
2) PUSH P,T1
2) MOVE T1,T0 ;[42]
2) PBOUT% ;[41]
**************
1)67 IFN FTENEX,<
1) JSYSER: HRROI 1,[ASCIZ /
1) /]
1) ;**;[41] Replace @JSYSER+2L DZN 5-Oct-78
1) PSOUT% ;[41]
1) HRROI 1,INBFR ;WHERE TO STORE STRING
1) HRLOI 2,400000 ;THIS FORK, LAST ERROR
1) SETZ 3, ;ANY LENGTH
1) ;**;[41] Replace @JSYSER+6L DZN 5-Oct-78
1) ERSTR% ;[41]
****
2)68 ;**;[42] Replace @PRNFRS+4L DZN 12-Oct-78
2) IFN TOPS20,<
2) JSYSER: HRROI T1,[ASCIZ /
2) /] ;[42]
2) PSOUT% ;[41]
2) HRROI T1,INBFR ;[42] WHERE TO STORE STRING
2) HRLOI T2,.FHSLF ;[42] THIS FORK, LAST ERROR
Digital Equipment Corporation 28-AUG-79 Page 26
PCO Log Report
2) SETZ T3, ;[42] ANY LENGTH
2) ERSTR% ;[41]
**************
1)67 HRROI 1,INBFR
1) ;**;[41] Replace @JSYSER+10L DZN 5-Oct-78
1) PSOUT% ;[41] GIVE IT TO THE USER
****
2)68 ;**;[42] Replace @JSYSER+9L DZN 13-Oct-78
2) HRROI T1,INBFR ;[42]
2) PSOUT% ;[41] GIVE IT TO THE USER
**************
1)68 IFE FTENEX,<
1) PRNPPN: MOVEI T1,"["
****
2)69 ;**;[42] Replace @PRNPPN-1L DZN 12-Oct-78
2) IFE TOPS20,<
2) PRNPPN: MOVEI T1,"["
**************
1)68 > ;END IFE FTENEX
1) FATAL: TYPE (<
****
2)69 ;**;[42] Replace @PRNPT2+4L DZN 12-Oct-78
2) > ;END IFE TOPS20
2) FATAL: TYPE (<
**************
1)69 IFE FTENEX,<
1) MOVSI T1,'LOG' ;SET DEFAULT EXT
****
2)70 ;**;[42] Replace @LOGOV.+3L DZN 12-Oct-78
2) IFE TOPS20,<
2) MOVSI T1,'LOG' ;SET DEFAULT EXT
**************
1)70 >;END IFE FTENEX
1)71 IFN FTENEX,<
1) DMOVEM 2,TEMP2
1) MOVEI T1,[ASCIZ /LOG/]
1) HRRM T1,DEFTBL+5 ;SET DEFAULT
1) MOVSI T1,(1B0) ;OUTPUT USE
1) MOVEM T1,DEFTBL
1) MOVE 2,@L ;GET ADDRESS
1) MOVE T1,(2) ;GET FIRST WORD
1) ANDCMI T1,377 ;CLEAR JUNK
****
2)71 ;**;[42] Replace @$ENTER+4L DZN 12-Oct-78
2) >;END IFE TOPS20
2)72 IFN TOPS20,<
2) DMOVEM T2,TEMP2 ;[42] SAVE JSYS ACS
2) HRROI T1,[ASCIZ /LOG/];[42]
2) MOVEM T1,DEFTBL+5 ;[42] SET DEFAULT
Digital Equipment Corporation 28-AUG-79 Page 27
PCO Log Report
2) MOVX T1,OF%WR ;[42] OUTPUT USE
2) MOVEM T1,DEFTBL
2) HRROI T2,@(L) ;[42] GET ADDRESS
2) MOVE T1,(T2) ;[42] GET FIRST WORD
2) ANDCMI T1,377 ;CLEAR JUNK
**************
1)71 HRLI 2,(POINT 7,)
1) MOVEI 1,DEFTBL
1) ;**;[41] Replace @$ENTER+18L DZN 5-Oct-78
1) GTJFN% ;[41]
1) JRST .ERGJF
1) HRRZM 1,LOGJFN ;SAVE JFN
1) MOVE 2,[7B5+1B20] ;ASCII MODE
1) ;**;[41] Replace @$ENTER+22L DZN 5-Oct-78
1) OPENF% ;[41]
1) JRST .EROPF
1) DMOVE 2,TEMP2
1) PJRST POPL ;RESTORE L AND RETURN
1) >;END IFN FTENEX
1) LOGTTY: SETOM .OVRLOG ;INDICATE WE WANT LOG FILE ON TT
Y
****
2)72 ;**;[42] Replace @$ENTER+19L DZN 13-Oct-78
2) MOVEI T1,DEFTBL ;[42]
2) GTJFN% ;[41]
2) JRST .ERGJF
2) HRRZM T1,LOGJFN ;[42] SAVE JFN
2) MOVX T2,<<FLD 7,OF%BSZ>!OF%WR> ;[42] 7-BIT BYTES FOR
WRITE
2) OPENF% ;[41]
2) JRST .EROPF
2) DMOVE T2,TEMP2 ;[42]
2) PJRST POPL ;RESTORE L AND RETURN
2) >;END IFN TOPS20
2) LOGTTY: SETOM .OVRLOG ;INDICATE WE WANT LOG FILE ON TT
Y
**************
1)72 IFE FTENEX,<
1) SEGMENT LOW
****
2)73 ;**;[42] Replace @CLSLOG+2L DZN 12-Oct-78
2) IFE TOPS20,<
2) SEGMENT LOW
**************
1)72 >;END IFE FTENEX
1) IFN FTENEX,<
1) MOVE 1,LOGJFN
1) ;**;[41] Replace @$CLOSE+24L DZN 5-Oct-78
1) CLOSF% ;[41]
Digital Equipment Corporation 28-AUG-79 Page 28
PCO Log Report
****
2)73 ;**;[42] Replace @$CLOSE+21L DZN 12-Oct-78
2) >;END IFE TOPS20
2) IFN TOPS20,<
2) MOVE T1,LOGJFN ;[42]
2) CLOSF% ;[41]
**************
1)72 IFE FTENEX,<
1) OBLOCK: EXP 1 ;MODE
****
2)73 ;**;[42] Replace @OBLOCK-1L DZN 12-Oct-78
2) IFE TOPS20,<
2) OBLOCK: EXP 1 ;MODE
**************
1)72 IFN FTENEX,<
1) LOGJFN: 0 ;HOLD JFN OF LOG FILE
****
2)73 ;**;[42] Replace @OBUF+2L DZN 12-Oct-78
2) IFN TOPS20,<
2) LOGJFN: 0 ;HOLD JFN OF LOG FILE
**************
1)74 IFE FTENEX,<
1) HRRZ T1,@(P) ;GET ADDRESS OF MESSAGE
****
2)75 ;**;[42] Replace @LOGTST+2L DZN 12-Oct-78
2) IFE TOPS20,<
2) HRRZ T1,@(P) ;GET ADDRESS OF MESSAGE
**************
1)74 IFN FTENEX,<
1) HRRO 1,@(P) ;GET ADDRESS OF MESSAGE
1) ;**;[41] Replace @LOGTST+8L DZN 5-Oct-78
1) PSOUT% ;[41] OUTPUT IT
****
2)75 ;**;[42] Replace @LOGTST+6L DZN 12-Oct-78
2) IFN TOPS20,<
2) HRRO T1,@(P) ;[42] GET ADDRESS OF MESSAGE
2) PSOUT% ;[41] OUTPUT IT
**************
1)74 IFE FTENEX,<
1) LOGIT: MOVE T1,@0(P) ;ADDRESS OF MESSAGE
****
2)75 ;**;[42] Replace @LOGTST+13L DZN 12-Oct-78
2) IFE TOPS20,<
2) LOGIT: MOVE T1,@0(P) ;ADDRESS OF MESSAGE
**************
1)74 >;END IFE FTENEX
1)75 IFN FTENEX,<
1) LOGIT: DMOVEM 2,TEMP2
1) MOVE 1,LOGJFN
1) MOVE 2,@0(P) ;ADDRESS OF MESSAGE
1) HRLI 2,(POINT 7,)
Digital Equipment Corporation 28-AUG-79 Page 29
PCO Log Report
1) SETZ 3, ;TERMINATE ON ZERO BYTE
1) ;**;[41] Replace @LOGIT+5L DZN 5-Oct-78
1) SOUT% ;[41]
1) ERJMP .EROEL
1) DMOVE 2,TEMP2
1) POPJ P,
1) LOGCHR: DMOVEM 2,TEMP2
1) MOVE 1,LOGJFN
1) MOVE 2,T0 ;GET CHAR
1) ;**;[41] Replace @LOGCHR+3L DZN 5-Oct-78
1) BOUT% ;[41]
1) ERJMP .EROEL
1) DMOVE 2,TEMP2
1) POPJ P,
****
2)75 ;**;[42] Replace @$STS+4L DZN 12-Oct-78
2) >;END IFE TOPS20
2)76 IFN TOPS20,<
2) LOGIT: DMOVEM T2,TEMP2 ;[42] SAVE JSYS ACS
2) MOVE T1,LOGJFN ;[42]
2) HRRO T2,@0(P) ;[42] ADDRESS OF MESSAGE
2) SETZ T3, ;[42] TERMINATE ON ZERO BYTE
2) SOUT% ;[41]
2) ERJMP .EROEL
2) DMOVE T2,TEMP2 ;[42] RESTORE JSYS ACS
2) POPJ P,
2) LOGCHR: DMOVEM T2,TEMP2 ;[42] SAVE JSYS ACS
2) MOVE T1,LOGJFN ;[42]
2) MOVE T2,T0 ;[42] GET CHAR
2) BOUT% ;[41]
2) ERJMP .EROEL
2) DMOVE T2,TEMP2 ;[42] RESTORE JSYS ACS
2) POPJ P,
**************
1)76 IFE FTENEX,<
1) SETZ T0, ;THIS JOB
****
2)77 ;**;[42] Replace @TIME+1L DZN 12-Oct-78
2) IFE TOPS20,<
2) SETZ T0, ;THIS JOB
**************
1)76 IFN FTENEX,<
1) MOVNI 1,5 ;WHOLE JOB
1) ;**;[41] Replace @TIME+7L DZN 5-Oct-78
1) RUNTM% ;[41]
1) MOVE T0,1
1) IMULI T0,^D1000 ;* MILISECS
1) IDIVI T0,(2) ;AFTER SECONDS DIVIDER IS APPLIE
D
Digital Equipment Corporation 28-AUG-79 Page 30
PCO Log Report
1) >
****
2)77 ;**;[42] Replace @TIME+5L DZN 12-Oct-78
2) IFN TOPS20,<
2) MOVX T1,.FHJOB ;[42] WHOLE JOB
2) RUNTM% ;[41]
2) MOVE T0,T1 ;[42]
2) IMULI T0,^D1000 ;* MILISECS
2) IDIVI T0,(T2) ;[42] AFTER SECONDS DIVIDER IS A
PPLIED
2) >
**************
1)77 MOVEM T0,.JBREL## ;RESET .JBREL FOR TENEX
1) MOVEM T1,.JBSA## ;BACK AS IT WAS
1) IFN FTENEX,<
1) MOVEI 1,.FHSLF ;ONLY DO CORE UUO IF PAT IS AROU
ND
1) ;**;[41] Replace @RESTART+18L DZN 5-Oct-78
1) GCVEC% ;[41] SO WON'T DRAG IT IN IF NOT
1) MOVE T1,.JBSA## ;RESTORE AC 1 FOR DISPATCH
1) SKIPE 2 ;[41] GCVEC% RETURNS 2=0 IF PAT
NOT AROUND
1) >;END IFN FTENEX
1) CORE T0, ;RESET OTHERWISE FREE CORE NOT A
VAILABLE
****
2)78 ;**;[42] Replace @RESTART+14L DZN 12-Oct-78
2) MOVEM T0,.JBREL## ;[42] RESET .JBREL FOR TOPS20
2) MOVEM T1,.JBSA## ;BACK AS IT WAS
2) IFN TOPS20,<
2) MOVX T1,.FHSLF ;[42] ONLY DO CORE UUO IF PAT IS
AROUND
2) GCVEC% ;[41] SO WON'T DRAG IT IN IF NOT
2) MOVE T1,.JBSA## ;RESTORE AC 1 FOR DISPATCH
2) SKIPE T2 ;[42] GCVEC% RETURNS T2=0 IF PAT
NOT AROUND
2) >;END IFN TOPS20
2) CORE T0, ;RESET OTHERWISE FREE CORE NOT A
VAILABLE
**************
1)80 IFN FTENEX,<
1) JFN: BLOCK 1 ;JFN OF THE OVERLAY FILE
****
2)81 ;**;[42] Replace @WPTR+2L DZN 12-Oct-78
2) IFN TOPS20,<
2) JFN: BLOCK 1 ;JFN OF THE OVERLAY FILE
**************
[End PCO Write-up]
Digital Equipment Corporation 28-AUG-79 Page 31
PCO Log Report
*********************
*PCO #:20-OVRLAY-005*
*********************
[Program Data] System: LINK
Component:OVRLAY
[Validity] 4(37) TESTED IN 4A(42)
[Date Entered] 02-NOV-78
[Programmer] D. NEFF
[Routines] REMOV. RUNOV. CP2A DELPTH
[Key Words] NO ?OVLARC
[Source Before Edit] %4A (000042)
[Source After Edit] %4A (000043)
[Test File Data] : [ ]
[Miscellaneous] DOC changes: N
SER/SPR Number:20-NONE
Critical: N
************************************************************************
[Notes]
Digital Equipment Corporation 28-AUG-79 Page 32
PCO Log Report
[PCO Write-up]
**********
[SYMPTOM]
Various errors can occur when attempting to delete a link in an
overlaid program. In particular, the following cases fail:
1. Calling REMOVL with a superior link name causes that link
to be deleted without an error message. Deleting a link
implies deleting all of its inferior links (including the
caller of REMOVL in this case), which is a user error, but
which REMOVL does not do.
2. Calling RUNOVL with the name of a link that would overlay
the calling link should succeed (since no return to the
caller is ever made), but does not. This is contrary to
the LINK documentation.
**********
[DIAGNOSIS]
1. There are two reasons for the REMOVL problems. First,
REMOVL is not deleting all of a link's inferior links,
along with the requested link itself. Second, REMOVL only
gives the OVLARC message if the caller is explicitly
requesting to delete itself.
2. The same (incomplete) checks are made in RUNOVL as in
REMOVL. This is incorrect, since RUNOVL should allow
overlaying of the calling link.
**********
[CURE]
To solve the above problems, several changes were made that could
Digital Equipment Corporation 28-AUG-79 Page 33
PCO Log Report
potentially affect user programs. First, REMOVL was changed to
take exactly a single argument (as documented) rather than a list
of arguments. The specified link and all of its inferiors are then
removed. If this results in the calling link being removed, then
the OVLARC message is printed. Note that since REMOVL deletes a
link and all of its inferiors, it is not necessary to have it take
multiple arguments (simply specify the most superior link), so
exactly one argument is now required.
Second, RUNOVL has been made to allow deletion of the calling link,
and in fact superior links (back to the level of the link to be
run), since the link to be run is not allowed to return.
Digital Equipment Corporation 28-AUG-79 Page 34
PCO Log Report
[FILCOM]
File 1) LINK:OVRLAY.MAC[30,4507] created: 1758 01-Nov-1978
File 2) LINK:OVRLAY.MAC[10,645063] created: 1951 01-Nov-1978
1)2 DECEVR==42 ;DEC EDIT VERSION
1) ENTRY .OVRLA,.OVRLU
****
2)2 DECEVR==43 ;DEC EDIT VERSION
2) ENTRY .OVRLA,.OVRLU
**************
1)7 SUBTTL DEFINITIONS
****
2)6 ;43 DZN 13-Oct-78
2) ; Fix link deletion problems. Make REMOV. take only a sing
le argument,
2) ; and delete that link and all of its inferiors (otherwise
lost links
2) ; result). Allow RUNOV. to delete the calling link as docu
mented. Also
2) ; remove OVLAOC message (use OVLARC instead).
2)7 SUBTTL DEFINITIONS
**************
1)17 CP2A: MOVEM P1,THSLNK ;SAVE FOR LATER
1) CAMN P1,CURLNK ;SUICIDE NOT LEGAL
1) JRST .ERAOC ;ATTEMPT TO OVERLAY CALLER
1) HRRZ P1,CS.FPT(P1) ;GET NEXT (ALWAYS LINKED TO LAST
)
1) PUSHJ P,GBLNK ;GIVE IT BACK TO OTS
1) JUMPN P1,CP2A ;GET RID OF IT
1) POP P,P1
****
2)17 ;**;[43] Replace @CP2A DZN 13-Oct-78
2) PUSHJ P,DELPTH ;[43] DELETE ALL OLD LINKS
2) POP P,P1
**************
1)18 ;HERE TO CHECK FOR OTHER RELOCATION
****
2)17 ;**;[43] Insert after CP3+19L (bottom of page) DZN 13-Oct-7
8
2) ;ROUTINE TO DELETE A LINK. THIS IMPLIES DELETING ALL OF ITS INFE
RIORS (THE
2) ;PATH) TOO. IF WE TRY TO DELETE THE CURRENT LINK (THE ONE THAT C
ALLED US),
2) ;GIVE ?OVLARC.
2) ;
2) ;CALL:
2) ; P1/ CONTROL BLOCK ADDR OF LINK TO START AT
2) ;DESTROYS P1.
2) DELPTH: MOVEM P1,THSLNK ;[43] SET UP LINK FOR GBLNK
2) SKIPN OKOVLC ;[43] OK TO DELETE THE CALLER'S
LINK
Digital Equipment Corporation 28-AUG-79 Page 35
PCO Log Report
2) CAME P1,CURLNK ;[43] OR NOT THE CALLER'S LINK
?
2) SKIPA ;[43] YES--DELETE THIS LINK
2) JRST .ERARC ;[43] NO--ATTEMPT TO REMOVE CALL
ER
2) HRRZ P1,CS.FPT(P1) ;[43] ADVANCE TO NEXT WHILE WE C
AN
2) PUSHJ P,GBLNK ;[43] GIVE BACK THE LINK
2) JUMPN P1,DELPTH ;[43] FREE MORE IF ANY
2) POPJ P, ;[43] ALL DONE
2)18 ;HERE TO CHECK FOR OTHER RELOCATION
**************
1)51 ENTRY REMOV.
1) ;CALLED BY
1) ; MOVEI 16,1+[-N,,0
1) ; [LINK NAME]
1) ; ...
1) ; [LINK NAME]]
1) ; PUSHJ P,REMOVL
1) 'REMOVL'
1) REMOV.: SKIPN -1(L) ;CHECK FOR NO ARGS
1) POPJ P, ;JUST IGNORE
1) PUSH P,L ;SAVE L
1) HLL L,-1(L) ;FORM AOBJN WORD
1) REMOV1: PUSHJ P,GETCUR ;GET CURRENT LINK SETUP
1) PUSHJ P,GETNUM ;GET LINK # TO REMOVE
1) JFCL REMOV.-1 ;INCASE OF ILL ARG TYPE
1) CAMN T1,CURNUM ;DON'T ALLOW SUICIDE
1) PUSHJ P,.ERARC
1) PUSHJ P,INCORE ;GET ADDRESS
1) JRST REMOV2 ;NOT INCORE
1) MOVEM T1,THSLNK ;STORE POINTER TO IT
1) PUSHJ P,GBLNK ;RETURN IT
1) REMOV2: AOBJN L,REMOV1 ;LOOP FOR ALL ARGS
1) ;**;[42] Replace @REMOV2+1L DZN 12-Oct-78
1) IFE TOPS20,<
1) MOVEI L,1+[-3,,0 ;ARG LIST
****
2)51 ;**;[43] Revamp REMOV. subroutine DZN 13-Oct-78
2) SUBTTL MANUAL CALL SUBROUTINES -- REMOV.
2) ;REMOV. DELETES THE REQUESTED LINK AND ALL OF ITS INFERIORS, THE
N ATTEMPTS
2) ;TO SHRINK MEMORY.
2) ;
2) ;CALL:
2) ; MOVEI 16,1+[1,,0
2) ; Z TYPE,[LINK]
2) ; PUSHJ 17,REMOV.
2) ;
Digital Equipment Corporation 28-AUG-79 Page 36
PCO Log Report
2) ;DEPENDING ON TYPE (SEE GETNUM) LINK CAN BE A LINK NUMBER OR ASC
II NAME.
2) ENTRY REMOV.
2) 'REMOVL'
2) REMOV.: PUSH P,L ;[43] SAVE L
2) PUSHJ P,GETCUR ;[43] GET CURRENT LINK SETUP
2) PUSHJ P,GETNUM ;GET LINK # TO REMOVE
2) JFCL REMOV.-1 ;IN CASE OF ILL ARG TYPE
2) PUSHJ P,INCORE ;GET ADDRESS
2) JRST REMOV1 ;[43] NOT IN CORE--NOTHING TO DO
2) MOVEI P1,(T1) ;[43] GO DO THE WORK
2) PUSHJ P,DELPTH ;[43] ..
2) MOVEI L,1+[-3,,0 ;ARG LIST
**************
1)51 >
1) PJRST POPL ;RESTORE AND RETURN
1)52 ;RUNOVL - GETS LINK INTO CORE AND JUMPS TO ITS START ADDRESS
1) ENTRY RUNOV.
****
2)51 REMOV1: PJRST POPL ;[43] RESTORE AND RETURN
2)52 ;RUNOV. - GETS LINK INTO CORE AND JUMPS TO ITS START ADDRESS
2) ENTRY RUNOV.
**************
1)52 PUSHJ P,CP0 ;CHECK PATH
1) POP P,T0 ;RESTORE LINK #
****
2)52 ;**;[43] Insert after RUNOV.+7L DZN 13-Oct-78
2) SETOM OKOVLC ;[43] ALLOW OVERLAY OF C
ALLER
2) PUSHJ P,CP0 ;CHECK PATH
2) SETZM OKOVLC ;[43] DISALLOW OVERLAY O
F CALLER
2) POP P,T0 ;RESTORE LINK #
**************
1)65 .ERAOC: PUSHJ P,FATAL
1) TYPE (<AOC Attempt to overlay caller from>)
1) PUSHJ P,PRNLNK
1) STOP
1) .ERARC: PUSHJ P,FATAL
****
2)65 ;**;[43] Delete @.ERAOC DZN 13-Oct-78
2) .ERARC: PUSHJ P,FATAL
**************
1)79 AOC Attempt to overlay caller from link number [number]
1) ARC Attempt to remove caller from link number [number]
****
2)79 ARC Attempt to remove caller from link number [number]
**************
1)81 IDXBFR: BLOCK 200 ;200 WORD WINDOW OF LINK POINTER
Digital Equipment Corporation 28-AUG-79 Page 37
PCO Log Report
S
****
2)81 ;**;[43] Insert after TEMP2+1L DZN 13-Oct-78
2) OKOVLC: BLOCK 1 ;[43] -1 = OK TO OVERLAY CALLER
(RUNOV.)
2) IDXBFR: BLOCK 200 ;200 WORD WINDOW OF LINK POINTER
S
**************
[End PCO Write-up]
Digital Equipment Corporation 28-AUG-79 Page 38
PCO Log Report
*********************
*PCO #:20-OVRLAY-006*
*********************
[Program Data] System: LINK
Component:OVRLAY
[Validity] 4(37) TESTED IN 4A(43)
[Date Entered] 07-NOV-78
[Programmer] D. NEFF
[Routines] GETNUM .ERIAT
[Key Words] ARG TYPES
[Source Before Edit] %4A (000043)
[Source After Edit] %4A (000044)
[Test File Data] : [ ]
[Miscellaneous] DOC changes: N
SER/SPR Number:20-NONE
Critical: N
************************************************************************
[Notes]
Digital Equipment Corporation 28-AUG-79 Page 39
PCO Log Report
[PCO Write-up]
**********
[SYMPTOM]
Various problems with argument checking in the manual call
subroutines (e.g., GETOV., REMOV.):
1. Not all of the defined single and double precision
argument types are accepted by the manual call
subroutines. One example of this is that CALL GETOVL("1)
fails in FORTRAN, since the argument is marked as octal by
FORTRAN and octal types are not accepted by the overlay
handler.
2. The OVLIAT message (illegal argument type) prints junk for
the routine called, and the wrong PC of the caller.
**********
[DIAGNOSIS]
1. The overlay handler was designed before the more exotic
types were added, and was never told about them.
2. Edit 10 was supposed to fix this problem, but the reasons
for its failure are lost in history. Currently, the code
is using the wrong stack offset to find the call to the
manual routine, causing it to look in the wrong place for
the name and the calling PC.
**********
[CURE]
1. Allow all currently defined single and double precision
argument types to be valid for the overlay handler.
Digital Equipment Corporation 28-AUG-79 Page 40
PCO Log Report
2. Make the overlay handler's type checking error routine
look in the right place for the routine name and calling
PC.
Digital Equipment Corporation 28-AUG-79 Page 41
PCO Log Report
[FILCOM]
File 1) LINK:OVRLAY.MAC[30,4507] created: 1951 01-Nov-1978
File 2) LINK:OVRLAY.MAC[10,645063] created: 1053 03-Nov-1978
1)2 SUBTTL D.M.NIXON/DMN/JLd/JNG/MCHC/DZN 13-Oct-78
1) CUSTVR==0 ;CUSTOMER VERSION
****
2)2 SUBTTL D.M.NIXON/DMN/JLd/JNG/MCHC/DZN 15-Oct-78
2) CUSTVR==0 ;CUSTOMER VERSION
**************
1)2 DECEVR==43 ;DEC EDIT VERSION
1) ENTRY .OVRLA,.OVRLU
****
2)2 DECEVR==44 ;DEC EDIT VERSION
2) ENTRY .OVRLA,.OVRLU
**************
1)7 SUBTTL DEFINITIONS
****
2)6 ;44 DZN 15-Oct-78
2) ; Fix argument checking for calls to manual subroutines. T
his involves
2) ; allowing all double and single precision argument types
to work,
2) ; making the OVLIAT message fatal and not type junk, and g
etting
2) ; the correct user PC (see edit 10).
2)7 SUBTTL DEFINITIONS
**************
1)49 INIOV.:
1) ;**;[42] Replace @INIOV.+1L DZN 12-Oct-78
1) IFE TOPS20,<
****
2)49 ;**;[44] Replace @INIOV. DZN 15-Oct-78
2) INIOV.: HRRZ T1,(P) ;[44] SAVE USER'S RETURN PC
2) MOVEM T1,USERPC ;[44] ..
2) IFE TOPS20,<
**************
1)49 PUSHJ P,OVINI ;OPEN OVERLAY FILE
1) POPJ P, ;RETURN
1) >
****
2)49 ;**;[44] Delete @INIOV.+12L DZN 15-Oct-78
2) >
**************
1)49 PUSHJ P,OVINI ;OPEN OVERLAY FILE
1) POPJ P, ;RETURN
1) >
1)50 ENTRY GETOV.
****
2)49 ;**;[44] Move angle-bracket up to INIOV.+19L DZN 15-Oct-7
8
Digital Equipment Corporation 28-AUG-79 Page 42
PCO Log Report
2) >
2) PUSHJ P,OVINI ;OPEN OVERLAY FILE
2) POPJ P, ;RETURN
2)50 ENTRY GETOV.
**************
1)50 GETOV.: SKIPN -1(L) ;CHECK FOR NO ARGS
1) POPJ P, ;JUST IGNORE
****
2)50 ;**;[44] Insert @GETOV. DZN 15-Oct-78
2) GETOV.: HRRZ T1,(P) ;[44] SAVE USER'S RETURN PC
2) MOVEM T1,USERPC ;[44] ..
2) SKIPN -1(L) ;[44] CHECK FOR NO ARGS
2) POPJ P, ;JUST IGNORE
**************
1)51 REMOV.: PUSH P,L ;[43] SAVE L
1) PUSHJ P,GETCUR ;[43] GET CURRENT LINK SETUP
****
2)51 ;**;[44] Insert @REMOV. DZN 15-Oct-78
2) REMOV.: HRRZ T1,(P) ;[44] SAVE USER'S RETURN PC
2) MOVEM T1,USERPC ;[44] ..
2) PUSH P,L ;[44] SAVE L
2) PUSHJ P,GETCUR ;[43] GET CURRENT LINK SETUP
**************
1)52 RUNOV.: PUSH P,L ;SAVE L SO STACK IS CONSTANT
1) PUSHJ P,GETCUR ;POINT TO CALLER
1) POP P,L ;RESTORE STACK
1) PUSHJ P,GETNUM ;CONVERT ARG TO A LINK NUMBER
****
2)52 ;**;[44] Replace @RUNOV. DZN 15-Oct-78
2) RUNOV.: HRRZ T1,(P) ;[44] SAVE USER'S RETURN PC
2) MOVEM T1,USERPC ;[44] ..
2) PUSHJ P,GETCUR ;POINT TO CALLER
2) PUSHJ P,GETNUM ;CONVERT ARG TO A LINK NUMBER
**************
1)53 SAVOV.:
1) PUSHJ P,.ERNYA
1) ENTRY CLROV.
****
2)53 ;**;[44] Insert @SAVOV. DZN 15-Oct-78
2) SAVOV.: HRRZ T1,(P) ;[44] SAVE USER'S RETURN PC
2) MOVEM T1,USERPC ;[44] ..
2) PUSHJ P,.ERNYA ;[44]
2) ENTRY CLROV.
**************
1)53 CLROV.:
1) PUSHJ P,.ERNYA
1) .ERNYA: PUSHJ P,WARNIN
****
2)53 ;**;[44] Insert @CLROV. DZN 15-Oct-78
Digital Equipment Corporation 28-AUG-79 Page 43
PCO Log Report
2) CLROV.: HRRZ T1,(P) ;[44] SAVE USER'S RETURN PC
2) MOVEM T1,USERPC ;[44] ..
2) PUSHJ P,.ERNYA ;[44]
2) .ERNYA: PUSHJ P,WARNIN
**************
1)54 TMPOV.: PUSHJ P,.ERNYA
1) PUSH P,L ;SAVE L
****
2)54 ;**;[44] Insert @TMPOV. DZN 15-Oct-78
2) TMPOV.: HRRZ T1,(P) ;[44] SAVE USER'S RETURN PC
2) MOVEM T1,USERPC ;[44] ..
2) PUSHJ P,.ERNYA ;[44]
2) PUSH P,L ;SAVE L
**************
1)55 A.SPR,TY.ILL
1) 5,TY.ILL
1) A.OCT,TY.ILL
1) A.LBL,TY.ILL
****
2)55 ;**;[44] Replace @TYPTBL+4L DZN 15-Oct-78
2) A.SPR,TY.SP ;[44]
2) 5,TY.ILL
2) A.OCT,TY.SP ;[44]
2) A.LBL,TY.ILL
**************
1)55 A.DO ,TY.ILL
1) 13,TY.ILL
****
2)55 ;**;[44] Replace @TYPTBL+10L DZN 15-Oct-78
2) A.DO ,TY.DP ;[44]
2) 13,TY.ILL
**************
1)55 TY.ILL: PUSHJ P,WARNIN
1) POPJ P,
1) .ERIAT: TYPE (<IAT Illegal argument type on call to >)
1) POP P,T1 ;RETURN PC
1) MOVE T1,(T1) ;GET NAME OF ROUTINE
1) PUSHJ P,PRNSBX ;PRINT IT
1) TYPE (< from >)
1) MOVE T1,(P) ;GET PC
1) MOVEI T0,-1(T1) ;BACKUP AND LEFT JUSTIFY
1) PUSHJ P,PRNOCT
1) PJRST CRLF
1)56 TY.DP0: MOVE T0,T1 ;PUT LOW ORDER WORD INTO HIGH
****
2)55 ;**;[44] Revamp @TY.ILL DZN 15-Oct-78
2) TY.ILL: PUSHJ P,FATAL ;[44]
2) .ERIAT: TYPE (<IAT Illegal argument type on call to >)
2) MOVE T1,(P) ;[44] GET ROUTINE NAME POINTED T
Digital Equipment Corporation 28-AUG-79 Page 44
PCO Log Report
O
2) MOVE T1,@(T1) ;[44] BY THE JFCL
2) PUSHJ P,PRNSBX ;PRINT IT
2) TYPE (< from >)
2) MOVE T0,USERPC ;[44] GET USER'S PC FOR MESSAGE
2) SUBI T0,1 ;[44] MAKE IT PC OF CALL
2) PUSHJ P,PRNOCT
2) PUSHJ P,CRLF ;[44] END THE LINE
2) STOP ;[44] DIE
2)56 TY.DP0: MOVE T0,T1 ;PUT LOW ORDER WORD INTO HIGH
**************
1)61 HRRZ T4,-4(P) ;GET PC OF ORIGINAL CALL
1) SKIPN T1,FSTLNK ;GET START OF OVERLAY LIST
****
2)61 ;**;[44] Replace @GETCUR+1L DZN 15-Oct-78
2) MOVE T4,USERPC ;[44] GET USER'S RETURN PC
2) SKIPN T1,FSTLNK ;GET START OF OVERLAY LIST
**************
1)81 ;**;[43] Insert after TEMP2+1L DZN 13-Oct-78
****
2)81 ;**;[44] Insert after TEMP2+1L DZN 15-Oct-78
2) USERPC: BLOCK 1 ;[44] USER RETURN PC FOR MANUAL
CALLS
2) ;**;[43] Insert after TEMP2+1L DZN 13-Oct-78
**************
[End PCO Write-up]
Digital Equipment Corporation 28-AUG-79 Page 45
PCO Log Report
*********************
*PCO #:20-OVRLAY-007*
*********************
[Program Data] System: LINK
Component:OVRLAY
[Validity] 4(37) TESTED IN 4A(44)
[Date Entered] 07-NOV-78
[Programmer] D. NEFF
[Routines] RUNOV.
[Key Words] RUNOV. PDL
[Source Before Edit] %4A (000044)
[Source After Edit] %4A (000045)
[Test File Data] : [ ]
[Miscellaneous] DOC changes: N
SER/SPR Number:20-NONE
Critical: N
************************************************************************
[Notes]
Digital Equipment Corporation 28-AUG-79 Page 46
PCO Log Report
[PCO Write-up]
**********
[SYMPTOM]
Push-down overflows occur when running (via calls to RUNOV.)
overlays many times.
**********
[DIAGNOSIS]
Each time RUNOV. is called to run an overlay, it leaves a word on
the stack. This adds up and can result in a push-down overflow if
enough calls to RUNOV. are made.
**********
[CURE]
See that the overlay handler leaves nothing of its own on the stack
when running an overlay. This can be done because overlays that
are run with RUNOV. are not allowed to return.
Digital Equipment Corporation 28-AUG-79 Page 47
PCO Log Report
[FILCOM]
File 1) LINK:OVRLAY.MAC[30,4507] created: 1053 03-Nov-1978
File 2) LINK:OVRLAY.MAC[10,645063] created: 1549 07-Nov-1978
1)2 DECEVR==44 ;DEC EDIT VERSION
1) ENTRY .OVRLA,.OVRLU
****
2)2 DECEVR==45 ;DEC EDIT VERSION
2) ENTRY .OVRLA,.OVRLU
**************
1)7 SUBTTL DEFINITIONS
****
2)6 ;45 DZN 15-Oct-78
2) ; Fix PDL overflow if many calls to RUNOV. RUNOV. now unbi
nds back
2) ; through the return PC on the stack, allowing replacement
of links
2) ; at the same level to succeed without the PDL overflow.
2)7 SUBTTL DEFINITIONS
**************
1)52 JUMPN T0,@T0 ;GOTO IT
1) MOVEM T1,THSLNK ;SO WE CAN ADDRESS LINK
1) .ERNSA: PUSHJ P,FATAL
****
2)52 ;**;[45] Replace @RUNOV.+16L DZN 15-Oct-78
2) JUMPE T0,RUNOV1 ;[45] SEE IF THERE'S A START ADD
RESS
2) POP P,(P) ;[45] LOSE USER'S RETURN PC
2) JRST @T0 ;[45] SINCE LINK WILL NEVER RE
TURN
2) RUNOV1: MOVEM T1,THSLNK ;[45] SO WE CAN ADDRESS LINK
2) .ERNSA: PUSHJ P,FATAL
**************
[End PCO Write-up]
Digital Equipment Corporation 28-AUG-79 Page 48
PCO Log Report
*********************
*PCO #:10-OVRLAY-020*
*********************
[Program Data] System: LINK
Component:OVRLAY
[Validity] 4(37)
[Date Entered] 15-JUN-79
[Programmer] GILBERT
[Routines]
[Key Words] SFDS
[Source Before Edit] %4A (000045)
[Source After Edit] %4A (000046)
[Test File Data] : [ ]
[Miscellaneous] DOC changes: N
SER/SPR Number:10-NONE
Critical: N
************************************************************************
[Notes]
Digital Equipment Corporation 28-AUG-79 Page 49
PCO Log Report
[PCO Write-up]
**********
[SYMPTOM]
The runtime overlay handler cannot find the overlay
file when the overlaid program has been run from an SFD.
This problem is worse under 7-series monitors, since the
overlay handler can't even find the overlay file when the
default path is set into an SFD.
**********
[DIAGNOSIS]
Under monitors before 7-series, the information is not
available. However, new GETTABs in the 7-series monitors
make it possible to fully support SFDs in OVRLAY.
**********
[CURE]
If the GETTABs are available, use what they return to
find the overlay file. If not, use FUNCT. as in the past.
Digital Equipment Corporation 28-AUG-79 Page 50
PCO Log Report
[FILCOM]
File 1) LINK:OVRLAY.MAC[30,4507] created: 1647 05-Apr-1979
File 2) LINK:OVRLAY.MAC[30,3737,T] created: 1514 15-Jun-1979
1)1 SUBTTL D.M.NIXON/DMN/JLd/JNG/MCHC/DZN 15-Oct-78
1)
****
2)1 SUBTTL D.M.NIXON/DMN/JLd/JNG/MCHC/DZN 15-Jun-79
2)
**************
1)1 ;COPYRIGHT (C) 1974, 1978 BY
1) ;DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
****
2)1 ;COPYRIGHT (C) 1974, 1978, 1979 BY
2) ;DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
**************
1)1 DECEVR==45 ;DEC EDIT VERSION
1)
****
2)1 DECEVR==46 ;DEC EDIT VERSION
2)
**************
1)6 SUBTTL DEFINITIONS
****
2)5 ;46 JNG 15-Jun-79
2) ; Use 7.01 GETTABs if available to find overlay file.
2)
2)6 SUBTTL DEFINITIONS
**************
1)40 MOVEI L,1+[-6,,0 ;ARG LIST FOR GET FILE S
PEC FNCT
1) A.SPI,[F.IFS] ;FUNCTION #11
****
2)40 ;**;[46] Insert @ OVINI+1P4L JNG 15-Jun-79
2)
2)
2) ;NOW TRY TO GET WHERE WE CAME FROM (INCLUDING SFD'S) VIA GETTAB.
2) ;IF UNAVAILABLE (OLD MONITOR), USE INFO FROM FUNCT.
2)
2) MOVSI T1,-<.PTMAX-.PTSFD-1> ;[46] NUMBER OF SFD'S
2) HRROI T0,.GTRS0 ;[46] GETTAB FOR RUN FROM SFD, T
HIS JOB
2) SFDLUP: PUSH P,T0 ;[46] SAVE OVER GETTAB
2) GETTAB T0, ;[46] GET IT
2) JRST NOSFD ;[46] GETTAB FAILED, SEE WHY
2) MOVEM T0,LPATH+.PTSFD(T1) ;[46] STORE THIS SFD
2) POP P,T0 ;[46] RESTORE
2) ADDI T0,1 ;[46] INCREMENT GETTAB ARG
2) AOBJN T1,SFDLUP ;[46] LOOP FOR ALL SFD'S
2) JRST GETUFD ;[46] GOT ALL SFDS, NOW FOR UFD
2)
Digital Equipment Corporation 28-AUG-79 Page 51
PCO Log Report
2)
2) ;HERE WHEN A GETTAB TO GET AN SFD FAILED. SEE IF THE MONITOR IS
TOO OLD.
2)
2) NOSFD: POP P,T0 ;[46] KEEP STACK IN PHASE
2) TRNE T1,-1 ;[46] FAIL FIRST TIME?
2) JRST GETUFD ;[46] NO, GOT SOME SFDS, USE NEW
DATA
2) JRST NOT701 ;[46] GO USE FUNCT.
2)
2)41 ;HERE IF THE 7.01 GETTABS WORK. FILL IN THE REST OF THE DATA.
2)
2) GETUFD: SETZM LPATH+.PTSFD(T1) ;[46] FORCE A ZERO AFTER
THE LAST SFD
2) HRROI T1,.GTRDI ;[46] UFD OF PATH WE WERE RUN FR
OM
2) GETTAB T1, ;[46] GET IT
2) JRST NOT701 ;[46] CAN'T
2) SKIPN T1 ;[46] THERE?
2) JRST NOT701 ;[46] NO, GIVE UP
2) MOVEM T1,LPATH+.PTPPN ;[46] STORE UFD TO FINISH PATH B
LOCK
2) HRROI T1,.GTRDV ;[46] GET DEVICE WE WERE RUN FRO
M
2) GETTAB T1, ;[46] . . .
2) JRST NOT701 ;[46] NOT THERE FORGET IT
2) SKIPN T1 ;[46] AVAILABLE?
2) JRST NOT701 ;[46] NOPE, DON'T USE THIS INFO
2) MOVEM T1,IDEV ;[46] YES, STORE DEVICE
2) HRROI T1,.GTRFN ;[46] THE FILE NAME WE CAME FROM
2) GETTAB T1, ;[46] GET IT
2) JRST NOT701 ;[46] CAN'T, LEAVE WELL ENOUGH A
LONE
2) SKIPN T1 ;[46] RETURN ANYTHING?
2) JRST NOT701 ;[46] NO, IGNORE IT
2) MOVEM T1,LNAME ;[46] OK, STORE IT
2) MOVEI T1,LPATH ;[46] NOW POINT LOOKUP BLOCK TO
PATH BLOCK
2) MOVEM T1,LPPN ;[46] STORE IN .RBPPN
2) JRST OVINI1 ;[46] DONE, PROCEED
2)
2)
2) ;HERE IF THE GETTABS DON'T WORK. USE FUNCT. TO ASK THE OTS THE
2) ;CONTENTS OF THE ACS AT STARTUP.
2)
2) NOT701: MOVEI L,1+[-6,,0 ;[46] ARG LIST FOR GET F
ILE SPEC FNCT
2) A.SPI,[F.IFS] ;FUNCTION #11
**************
Digital Equipment Corporation 28-AUG-79 Page 52
PCO Log Report
1)40 IFN TOPS20,<
****
2)41
2)42 IFN TOPS20,<
**************
[End PCO Write-up]
Digital Equipment Corporation 28-AUG-79 Page 53
PCO Log Report
*********************
*PCO #:10-OVRLAY-021*
*********************
[Program Data] System: LINK
Component:OVRLAY
[Validity] 4A(46)+ALL EDITS
[Date Entered] 27-AUG-79
[Programmer] D. NEFF
[Routines] ALL
[Key Words] CLEAN-UP
[Source Before Edit] % (000000)
[Source After Edit] %4A (000047)
[Test File Data] : [ ]
[Miscellaneous] DOC changes: N
SER/SPR Number:10-NONE
Critical: N
************************************************************************
[Notes]
Digital Equipment Corporation 28-AUG-79 Page 54
PCO Log Report
[PCO Write-up]
**********
[SYMPTOM]
This being the last edit before the last field test tape, it is
time to update copyright notices, and see that pages are broken at
readable places.
**********
[DIAGNOSIS]
Yes.
**********
[CURE]
Yes.
Digital Equipment Corporation 28-AUG-79 Page 55
PCO Log Report
[FILCOM]
File 1) LINK:OVRLAY.MAC[12,4700,WEIGHT] created: 1514 15-Jun-1979
File 2) LINK:OVRLAY.MAC[30,4507] created: 1034 26-Jul-1979
1)1 SUBTTL D.M.NIXON/DMN/JLd/JNG/MCHC/DZN 15-Jun-79
1)
1)
1)
1) ;COPYRIGHT (C) 1974, 1978, 1979 BY
1) ;DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
****
2)1 SUBTTL D.M.NIXON/DMN/JLd/JNG/MCHC/DZN 25-Jul-79
2)
2)
2) ;COPYRIGHT (C) 1974, 1979 BY
2) ;DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
**************
1)1 DECEVR==46 ;DEC EDIT VERSION
1)
****
2)1 DECEVR==47 ;DEC EDIT VERSION
2)
**************
1)2 COMMENT \ STANDARD DEC SETTING
****
2)2
2) COMMENT \ STANDARD DEC SETTING
**************
1)2
1)3 SUBTTL REVISION HISTORY
1)
****
2)3 SUBTTL REVISION HISTORY
2)
2)
**************
1)6 SUBTTL DEFINITIONS
1)
1) ;ACCUMULATORS
1) ;**;[42] Change @T0 DZN 5-Oct-78
1) T0=0 ;[42] T0-T5 MUST BE 0-5 FOR JSYS
ARGS
****
2)5 ;47 DZN 25-Jul-79
2) ; Clean up the listing for release.
2)
2)6 SUBTTL DEFINITIONS
2)
2)
2) ;ACCUMULATORS
2) T0=0 ;[42] T0-T5 MUST BE 0-5 FOR JSYS
Digital Equipment Corporation 28-AUG-79 Page 56
PCO Log Report
ARGS
**************
1)7 DEFINE SEGMENT (N)<
****
2)7
2) DEFINE SEGMENT (N)<
**************
1)7
1)8 DEFINE TYPE (MESSAGE)<
1) ;;**;[42] Change in TYPE macro DZN 5-Oct-78
1) IFE TOPS20,<
****
2)8 DEFINE TYPE (MESSAGE)<
2) IFE TOPS20,<
**************
1)8 ;;**;[42] Change in TYPEC macro DZN 5-Oct-78
1) IFE TOPS20,<
****
2)8 IFE TOPS20,<
**************
1)8 ;**;[42] Replace before STOP OPDEF DZN 5-Oct-78
1) IFE TOPS20,<
****
2)8 IFE TOPS20,<
**************
1)9 ;CONTROL SECTION STUFF
****
2)9
2) ;CONTROL SECTION STUFF
**************
1)11 COMMENT \
****
2)11
2) COMMENT \
**************
1)12
1)13 ;HERE IF NOT IN CORE, READ IN PREAMBLE
****
2)13 ;HERE IF NOT IN CORE, READ IN PREAMBLE
**************
1)13
1)14 ;RP0 - READ IN PREAMBLE
****
2)14 ;RP0 - READ IN PREAMBLE
**************
1)14
1)15 SUBTTL CHECK PATH
1)
****
Digital Equipment Corporation 28-AUG-79 Page 57
PCO Log Report
2)15 SUBTTL CHECK PATH
2)
2)
**************
1)15
1)16 CP2: PUSH P,P1 ;SAVE FIRST DIFF
1) HRRZ P1,P1 ;CLEAR PREV
1) ;**;[43] Replace @CP2A DZN 13-Oct-78
1) PUSHJ P,DELPTH ;[43] DELETE ALL OLD LINKS
****
2)16 CP2: PUSH P,P1 ;SAVE FIRST DIFF
2) HRRZ P1,P1 ;CLEAR PREV
2) PUSHJ P,DELPTH ;[43] DELETE ALL OLD LINKS
**************
1)16 ;**;[43] Insert after CP3+19L (bottom of page) DZN 13-Oct-7
8
1) ;ROUTINE TO DELETE A LINK. THIS IMPLIES DELETING ALL OF ITS INFE
RIORS (THE
****
2)16 ;ROUTINE TO DELETE A LINK. THIS IMPLIES DELETING ALL OF ITS INFE
RIORS (THE
**************
1)18 ;**;[42] Replace @CP5A+1P0L DZN 5-Oct-78
1) IFE TOPS20,<
****
2)18 IFE TOPS20,<
**************
1)19 ;**;[42] Replace @CP6+6L DZN 5-Oct-78
1) >;END IFE TOPS20
****
2)19 >;END IFE TOPS20
**************
1)19
1)
1)20 SUBTTL READ IN DDT SYMBOLS
1)
****
2)20 SUBTTL READ IN DDT SYMBOLS
2)
2)
**************
1)20 ;**;[42] Replace @GTSYM+24L DZN 5-Oct-78
1) IFN TOPS20,<
****
2)20 IFN TOPS20,<
**************
1)20
1)
1)21 IFN FTRELOC,<
Digital Equipment Corporation 28-AUG-79 Page 58
PCO Log Report
****
2)21 IFN FTRELOC,<
**************
1)23 MOVSYM: HRRZ T0,.JBSYM## ;GET BASE OF SYMBOL TABLE
****
2)23
2) MOVSYM: HRRZ T0,.JBSYM## ;GET BASE OF SYMBOL TABLE
**************
1)24 ADJSYM: ADDM T0,.JBSYM## ;
1) ;**;[42] Replace @ADJSYM DZN 5-Oct-78
1) IFN TOPS20,<
****
2)24 ADJSYM: ADDM T0,.JBSYM##
2) IFN TOPS20,<
**************
1)25 GBLNK: SKIPE .JBSYM## ;[32] KEEPING SYMBOLS UP TO DATE
?
****
2)25
2) GBLNK: SKIPE .JBSYM## ;[32] KEEPING SYMBOLS UP TO DATE
?
**************
1)26
1)27 SUBTTL GIVE BACK SYMBOLS
1)
****
2)27 SUBTTL GIVE BACK SYMBOLS
2)
2)
**************
1)27 ;**;[42] Replace @GBSYM+8L DZN 5-Oct-78
1) IFN TOPS20,<
****
2)27 IFN TOPS20,<
**************
1)28 GTLNK: SKIPN T1,.JBSYM## ;SYMBOLS MAY BE IN THE WAY
****
2)28
2) GTLNK: SKIPN T1,.JBSYM## ;SYMBOLS MAY BE IN THE WAY
**************
1)28 ADD T0,PS.LEN ;
1) CAIGE T0,(T1) ;ARE THEY?
****
2)28 ADD T0,PS.LEN
2) CAIGE T0,(T1) ;ARE THEY?
**************
1)32 MDL0: PUSH P,T3 ;ACC FOR AOBJN WORD
****
2)32
Digital Equipment Corporation 28-AUG-79 Page 59
PCO Log Report
2) MDL0: PUSH P,T3 ;ACC FOR AOBJN WORD
**************
1)34 IFN FTRELOC,<
****
2)34
2) IFN FTRELOC,<
**************
1)36 COMMENT \
****
2)36
2) COMMENT \
**************
1)38 SETINI: PUSH P,T1 ;SAVE CALLER PC
****
2)38
2) SETINI: PUSH P,T1 ;SAVE CALLER PC
**************
1)38
1)39 ;OVINI - ZEROES CORE AND GETS CHAN# FOR OVERLAY FILE
1) OVINI: MOVE T0,[I.ZZ,,I.ZZ+1]
****
2)39 SUBTTL OVINI - ZEROES CORE AND GETS CHAN# FOR OVERLAY FILE
2)
2)
2) OVINI: MOVE T0,[I.ZZ,,I.ZZ+1]
**************
1)39 ;**;[42] Replace @OVINI+3L DZN 5-Oct-78
1) IFE TOPS20,<
****
2)39 IFE TOPS20,<
**************
1)39 ;**;[42] Replace @OVINI+8L DZN 5-Oct-78
1) IFN TOPS20,<
****
2)39 IFN TOPS20,<
**************
1)39 ;**;[42] Replace @OVINI+22L DZN 12-Oct-78
1) IFE TOPS20,<
****
2)39 IFE TOPS20,<
**************
1)40 ;**;[46] Insert @ OVINI+1P4L JNG 15-Jun-79
1)
****
2)40
**************
1)41 ;**;[42] Replace @OVINI+1P12L DZN 12-Oct-78
1) >;END IFE TOPS20
****
Digital Equipment Corporation 28-AUG-79 Page 60
PCO Log Report
2)41 >;END IFE TOPS20
**************
1)42 ;**;[41] Replace @OVINI+1P23L DZN 5-Oct-78
1) RMAP% ;[41] JFN FROM WHENCE WE CAME
1) ERJMP .ERRMP
1) ;**;[42] Replace @OVINI+1P27L DZN 12-Oct-78
1) HLRZ T2,T1 ;[42] JFN
****
2)42 RMAP% ;[41] JFN FROM WHENCE WE CAME
2) ERJMP .ERRMP
2) HLRZ T2,T1 ;[42] JFN
**************
1)43 ;**;[42] Replace @OVINI1+7L DZN 12-Oct-78
1) IFE TOPS20,<
****
2)43 IFE TOPS20,<
**************
1)43 ;**;[42] Replace @IVINI1+15L DZN 12-Oct-78
1) MOVEI T1,DEFTBL ;[42]
****
2)43 MOVEI T1,DEFTBL ;[42]
**************
1)44 ;**;[42] Replace @ININI3+7L DZN 12-Oct-78
1) IFN TOPS20,<
****
2)44 IFN TOPS20,<
**************
1)45 ;**;[42] Insert after OVINI3+1P3L DZN 12-Oct-78
1) IFN TOPS20,<
****
2)45 IFN TOPS20,<
**************
1)45 ;**;[42] Replace @OVINI4+16L DZN 12-Oct-78
1) IFN TOPS20,<
****
2)45 IFN TOPS20,<
**************
1)46 ;**;[40] Insert after POPL+2L DZN 15-Sep-78
1) ;ROUTINE TO STUFF C(.JBSYM) INTO DDT IF DDT IS IN MEMORY (TOPS-2
0 ONLY).
****
2)46 ;ROUTINE TO STUFF C(.JBSYM) INTO DDT IF DDT IS IN MEMORY (TOPS-2
0 ONLY).
**************
1)46 ;**;[42] Replace @CHKDDT-1 DZN 12-Oct-78
1) IFN TOPS20,<
****
2)46 IFN TOPS20,<
**************
Digital Equipment Corporation 28-AUG-79 Page 61
PCO Log Report
1)46 ;**;[41] Replace @CHKDDT+3L DZN 5-Oct-78
1) RPACS% ;[41] ..
****
2)46 RPACS% ;[41] ..
**************
1)47 ;**;[42] Replace @%INIT-2L DZN 12-Oct-78
1) IFE TOPS20,<
****
2)47
2) IFE TOPS20,<
**************
1)48 IFN FTWRITE,<
****
2)48
2) IFN FTWRITE,<
**************
1)48 ;**;[42] Replace @%OUTPT+7L DZN 12-Oct-78
1) >;END IFE TOPS20
****
2)48 >;END IFE TOPS20
**************
1)49 IFN TOPS20,<
****
2)49
2) IFN TOPS20,<
**************
1)50 IFN FTMANUAL,<
****
2)50
2)
2) IFN FTMANUAL,<
**************
1)50 ;**;[44] Replace @INIOV. DZN 15-Oct-78
1) INIOV.: HRRZ T1,(P) ;[44] SAVE USER'S RETURN PC
****
2)50 INIOV.: HRRZ T1,(P) ;[44] SAVE USER'S RETURN PC
**************
1)50 MOVSI T1,'OVL' ;
1) MOVEM T1,LEXT
1) PUSHJ P,GETSPC ;GET THE FILE SPEC
1) ;**;[44] Delete @INIOV.+12L DZN 15-Oct-78
1) >
1) ;**;[42] Replace @INIOV.+14L DZN 12-Oct-78
1) IFN TOPS20,<
****
2)50 MOVSI T1,'OVL'
2) MOVEM T1,LEXT
2) PUSHJ P,GETSPC ;GET THE FILE SPEC
2) >
2) IFN TOPS20,<
**************
Digital Equipment Corporation 28-AUG-79 Page 62
PCO Log Report
1)50 ;**;[44] Move angle-bracket up to INIOV.+19L DZN 15-Oct-7
8
1) >
****
2)50 >
**************
1)51 ;**;[44] Insert @GETOV. DZN 15-Oct-78
1) GETOV.: HRRZ T1,(P) ;[44] SAVE USER'S RETURN PC
****
2)51 GETOV.: HRRZ T1,(P) ;[44] SAVE USER'S RETURN PC
**************
1)51
1)52 ;**;[43] Revamp REMOV. subroutine DZN 13-Oct-78
1) SUBTTL MANUAL CALL SUBROUTINES -- REMOV.
1)
****
2)52 SUBTTL MANUAL CALL SUBROUTINES -- REMOV.
2)
2)
**************
1)52 ;**;[44] Insert @REMOV. DZN 15-Oct-78
1) REMOV.: HRRZ T1,(P) ;[44] SAVE USER'S RETURN PC
****
2)52 REMOV.: HRRZ T1,(P) ;[44] SAVE USER'S RETURN PC
**************
1)53 ;RUNOV. - GETS LINK INTO CORE AND JUMPS TO ITS START ADDRESS
1)
****
2)53 SUBTTL RUNOV. - GETS LINK INTO CORE AND JUMPS TO ITS START ADDR
ESS
2)
2)
**************
1)53 ;**;[44] Replace @RUNOV. DZN 15-Oct-78
1) RUNOV.: HRRZ T1,(P) ;[44] SAVE USER'S RETURN PC
****
2)53 RUNOV.: HRRZ T1,(P) ;[44] SAVE USER'S RETURN PC
**************
1)53 ;**;[43] Insert after RUNOV.+7L DZN 13-Oct-78
1) SETOM OKOVLC ;[43] ALLOW OVERLAY OF C
ALLER
****
2)53 SETOM OKOVLC ;[43] ALLOW OVERLAY OF C
ALLER
**************
1)53 ;**;[45] Replace @RUNOV.+16L DZN 15-Oct-78
1) JUMPE T0,RUNOV1 ;[45] SEE IF THERE'S A START ADD
RESS
****
Digital Equipment Corporation 28-AUG-79 Page 63
PCO Log Report
2)53 JUMPE T0,RUNOV1 ;[45] SEE IF THERE'S A START ADD
RESS
**************
1)53
1)54 IFN FTWRITE,<
****
2)54 IFN FTWRITE,<
**************
1)54 ;**;[44] Insert @SAVOV. DZN 15-Oct-78
1) SAVOV.: HRRZ T1,(P) ;[44] SAVE USER'S RETURN PC
****
2)54 SAVOV.: HRRZ T1,(P) ;[44] SAVE USER'S RETURN PC
**************
1)54 ;**;[44] Insert @CLROV. DZN 15-Oct-78
1) CLROV.: HRRZ T1,(P) ;[44] SAVE USER'S RETURN PC
****
2)54 CLROV.: HRRZ T1,(P) ;[44] SAVE USER'S RETURN PC
**************
1)54
1)55 ENTRY TMPOV.
****
2)55 ENTRY TMPOV.
**************
1)55 ;**;[44] Insert @TMPOV. DZN 15-Oct-78
1) TMPOV.: HRRZ T1,(P) ;[44] SAVE USER'S RETURN PC
****
2)55 TMPOV.: HRRZ T1,(P) ;[44] SAVE USER'S RETURN PC
**************
1)55
1)56 SUBTTL USEFUL SUBROUTINES
1)
****
2)56 SUBTTL USEFUL SUBROUTINES
2)
2)
**************
1)56 ;**;[44] Replace @TYPTBL+4L DZN 15-Oct-78
1) A.SPR,TY.SP ;[44]
****
2)56 A.SPR,TY.SP ;[44]
**************
1)56 ;**;[44] Replace @TYPTBL+10L DZN 15-Oct-78
1) A.DO ,TY.DP ;[44]
****
2)56 A.DO ,TY.DP ;[44]
**************
1)56 ;**;[44] Revamp @TY.ILL DZN 15-Oct-78
1) TY.ILL: PUSHJ P,FATAL ;[44]
****
Digital Equipment Corporation 28-AUG-79 Page 64
PCO Log Report
2)56 TY.ILL: PUSHJ P,FATAL ;[44]
**************
1)56
1)57 TY.DP0: MOVE T0,T1 ;PUT LOW ORDER WORD INTO HIGH
****
2)57 TY.DP0: MOVE T0,T1 ;PUT LOW ORDER WORD INTO HIGH
**************
1)57
1)58 TY.DP:
****
2)58 TY.DP:
**************
1)58
1)
1)59 ;GETSPC - ROUTINE TO CONVERT STRING IN FILE SPEC
1) ;**;[42] Replace @TY.PTR+1P1L DZN 12-Oct-78
1) IFE TOPS20,<
****
2)59 ;GETSPC - ROUTINE TO CONVERT STRING IN FILE SPEC
2) IFE TOPS20,<
**************
1)60 ;**;[42] Replace @POP2L+2L DZN 12-Oct-78
1) >;END IFE TOPS20
****
2)60 >;END IFE TOPS20
**************
1)61
1)62 GETCUR: SPUSH <T2,T3,T4> ;NEED SOME ACCS
1) ;**;[44] Replace @GETCUR+1L DZN 15-Oct-78
1) MOVE T4,USERPC ;[44] GET USER'S RETURN PC
****
2)62 GETCUR: SPUSH <T2,T3,T4> ;NEED SOME ACCS
2) MOVE T4,USERPC ;[44] GET USER'S RETURN PC
**************
1)62 T3POPJ: SPOP <T3,T2> ;
1) POPJ P,
****
2)62 T3POPJ: SPOP <T3,T2>
2) POPJ P,
**************
1)62 ;**;[42] Replace @GTCUR2+7L DZN 12-Oct-78
1) IFE TOPS20,<
****
2)62 IFE TOPS20,<
**************
1)63
1)64 SUBTTL ERROR HANDLING
1)
****
Digital Equipment Corporation 28-AUG-79 Page 65
PCO Log Report
2)64 SUBTTL ERROR HANDLING
2)
2)
**************
1)65 ;**;[42] Replace @.ERDOE-1L DZN 12-Oct-78
1) IFE TOPS20,<
****
2)65 IFE TOPS20,<
**************
1)65 ;**;[42] Replace @.ERCNA+3L DZN 12-Oct-78
1) >;END IFE TOPS20
1)
1)66 ;**;[43] Delete @.ERAOC DZN 13-Oct-78
1) .ERARC: PUSHJ P,FATAL
****
2)65 >;END IFE TOPS20
2)
2)66 .ERARC: PUSHJ P,FATAL
**************
1)66 ;**;[42] Replace @.ERIST+2L DZN 12-Oct-78
1) IFE TOPS20,<
****
2)66 IFE TOPS20,<
**************
1)67 ;**;[42] Replace @.EROPP-1L DZN 12-Oct-78
1) IFN TOPS20,<
****
2)67 IFN TOPS20,<
**************
1)67 ;**;[41] Replace @.ERSFP+1L DZN 5-Oct-78
1) TYPE (<SFP SFPTR% JSYS failed>)
****
2)67 TYPE (<SFP SFPTR% JSYS failed>)
**************
1)67 ;**;[41] Replace @.ERRPA+1L DZN 5-Oct-78
1) TYPE (<RPA RPACS% JSYS failed>)
****
2)67 TYPE (<RPA RPACS% JSYS failed>)
**************
1)67 ;**;[41] Replace @.ERRMP+1L DZN 5-Oct-78
1) TYPE (<RMP RMAP% JSYS failed>)
****
2)67 TYPE (<RMP RMAP% JSYS failed>)
**************
1)67 ;**;[41] Replace @.ERGJF+1L DZN 5-Oct-78
1) TYPE (<GJF GTJFN% JSYS failed>)
****
2)67 TYPE (<GJF GTJFN% JSYS failed>)
**************
Digital Equipment Corporation 28-AUG-79 Page 66
PCO Log Report
1)67 ;**;[41] Replace @.EROPF+1L DZN 5-Oct-78
1) TYPE (<OPF OPENF% JSYS failed>)
****
2)67 TYPE (<OPF OPENF% JSYS failed>)
**************
1)68 ;**;[42] Replace @%STS-2L DZN 12-Oct-78
1) IFE TOPS20,<
****
2)68 IFE TOPS20,<
**************
1)68 ;**;[42] Replace @PRNT0+5L DZN 12-Oct-78
1) IFE TOPS20,<
****
2)68 IFE TOPS20,<
**************
1)69 ;**;[42] Replace @PRNFRS+4L DZN 12-Oct-78
1) IFN TOPS20,<
****
2)69 IFN TOPS20,<
**************
1)69 ;**;[42] Replace @JSYSER+9L DZN 13-Oct-78
1) HRROI T1,INBFR ;[42]
****
2)69 HRROI T1,INBFR ;[42]
**************
1)70 ;**;[42] Replace @PRNPPN-1L DZN 12-Oct-78
1) IFE TOPS20,<
****
2)70 IFE TOPS20,<
**************
1)70 ;**;[42] Replace @PRNPT2+4L DZN 12-Oct-78
1) > ;END IFE TOPS20
****
2)70 > ;END IFE TOPS20
**************
1)71 IFN FTLOG,<
****
2)71
2)
2) IFN FTLOG,<
**************
1)71 ;**;[42] Replace @LOGOV.+3L DZN 12-Oct-78
1) IFE TOPS20,<
****
2)71 IFE TOPS20,<
**************
1)72 ;**;[42] Replace @$ENTER+4L DZN 12-Oct-78
1) >;END IFE TOPS20
****
Digital Equipment Corporation 28-AUG-79 Page 67
PCO Log Report
2)72 >;END IFE TOPS20
**************
1)73 ;**;[42] Replace @$ENTER+19L DZN 13-Oct-78
1) MOVEI T1,DEFTBL ;[42]
****
2)73 MOVEI T1,DEFTBL ;[42]
**************
1)74 ;**;[42] Replace @CLSLOG+2L DZN 12-Oct-78
1) IFE TOPS20,<
****
2)74 IFE TOPS20,<
**************
1)74 ;**;[42] Replace @$CLOSE+21L DZN 12-Oct-78
1) >;END IFE TOPS20
****
2)74 >;END IFE TOPS20
**************
1)74 ;**;[42] Replace @OBLOCK-1L DZN 12-Oct-78
1) IFE TOPS20,<
****
2)74 IFE TOPS20,<
**************
1)74 ;**;[42] Replace @OBUF+2L DZN 12-Oct-78
1) IFN TOPS20,<
****
2)74 IFN TOPS20,<
**************
1)76 ;**;[42] Replace @LOGTST+2L DZN 12-Oct-78
1) IFE TOPS20,<
****
2)76 IFE TOPS20,<
**************
1)76 ;**;[42] Replace @LOGTST+6L DZN 12-Oct-78
1) IFN TOPS20,<
****
2)76 IFN TOPS20,<
**************
1)76 ;**;[42] Replace @LOGTST+13L DZN 12-Oct-78
1) IFE TOPS20,<
****
2)76 IFE TOPS20,<
**************
1)76 ;**;[42] Replace @$STS+4L DZN 12-Oct-78
1) >;END IFE TOPS20
****
2)76 >;END IFE TOPS20
**************
1)78 ;**;[42] Replace @TIME+1L DZN 12-Oct-78
1) IFE TOPS20,<
Digital Equipment Corporation 28-AUG-79 Page 68
PCO Log Report
****
2)78 IFE TOPS20,<
**************
1)78 ;**;[42] Replace @TIME+5L DZN 12-Oct-78
1) IFN TOPS20,<
****
2)78 IFN TOPS20,<
**************
1)79 RESTART:
****
2)79
2) RESTART:
**************
1)79 ;**;[42] Replace @RESTART+14L DZN 12-Oct-78
1) MOVEM T0,.JBREL## ;[42] RESET .JBREL FOR TOPS20
****
2)79 MOVEM T0,.JBREL## ;[42] RESET .JBREL FOR TOPS20
**************
1)80 COMMENT \
****
2)80
2) COMMENT \
**************
1)81 SEGMENT LOW
****
2)81
2) SEGMENT LOW
**************
1)82 INCIDX: BLOCK 1 ;LOWEST INDEX IN CORE
****
2)82
2) INCIDX: BLOCK 1 ;LOWEST INDEX IN CORE
**************
1)82 ;**;[42] Replace @WPTR+2L DZN 12-Oct-78
1) IFN TOPS20,<
****
2)82 IFN TOPS20,<
**************
1)82 ;**;[44] Insert after TEMP2+1L DZN 15-Oct-78
1) USERPC: BLOCK 1 ;[44] USER RETURN PC FOR MANUAL
CALLS
1) ;**;[43] Insert after TEMP2+1L DZN 13-Oct-78
1) OKOVLC: BLOCK 1 ;[43] -1 = OK TO OVERLAY CALLER
(RUNOV.)
****
2)82 USERPC: BLOCK 1 ;[44] USER RETURN PC FOR MANUAL
CALLS
2) OKOVLC: BLOCK 1 ;[43] -1 = OK TO OVERLAY CALLER
(RUNOV.)
**************
1)82 END
Digital Equipment Corporation 28-AUG-79 Page 69
PCO Log Report
****
2)83 SUBTTL THE END
2)
2)
2) END
**************
[End PCO Write-up]
Digital Equipment Corporation 28-AUG-79 Page 70
PCO Log Report
*********************
*PCO #:10-OVRLAY-022*
*********************
[Program Data] System: LINK
Component:OVRLAY
[Validity] 4A(47) ONLY
[Date Entered] 27-AUG-79
[Programmer] D. NEFF
[Routines] ALL
[Key Words] LAST EDIT
[Source Before Edit] % (000000)
[Source After Edit] %4A (000050)
[Test File Data] : [ ]
[Miscellaneous] DOC changes: N
SER/SPR Number:10-NONE
Critical: N
************************************************************************
[Notes]
Digital Equipment Corporation 28-AUG-79 Page 71
PCO Log Report
[PCO Write-up]
**********
[SYMPTOM]
This being the last edit before the release of version 4A of
OVRLAY, the edit histories should reflect this fact.
**********
[DIAGNOSIS]
This must necessarily wait until the last minute.
**********
[CURE]
Update OVRLAY's edit history to reflect the released version.
Digital Equipment Corporation 28-AUG-79 Page 72
PCO Log Report
[FILCOM]
File 1) LINK:OVRLAY.MAC[30,4507] created: 1034 26-Jul-1979
File 2) LINK:OVRLAY.MAC[10,645063] created: 1339 27-Aug-1979
1)1 SUBTTL D.M.NIXON/DMN/JLd/JNG/MCHC/DZN 25-Jul-79
1) ;COPYRIGHT (C) 1974, 1979 BY
****
2)1 SUBTTL D.M.NIXON/DMN/JLd/JNG/MCHC/DZN 27-Aug-79
2) ;COPYRIGHT (C) 1974, 1979 BY
**************
1)1 DECEVR==47 ;DEC EDIT VERSION
1) ENTRY .OVRLA,.OVRLU
****
2)1 DECEVR==50 ;DEC EDIT VERSION
2) ENTRY .OVRLA,.OVRLU
**************
1)6 SUBTTL DEFINITIONS
****
2)5 ;50 DZN 27-Aug-79
2) ; Release on both TOPS-10 and TOPS-20 as version 4A(50).
2)6 SUBTTL DEFINITIONS
**************
[End PCO Write-up]