Trailing-Edge
-
PDP-10 Archives
-
BB-F492Z-DD_1986
-
10,7/703anf/dnrda.p11
There are 3 other files named dnrda.p11 in the archive. Click here to see a list.
.SBTTL DNRDA - ASCII RDE DRIVERS 11 DEC 84
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY ONLY BE USED
; OR COPIED IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
;COPYRIGHT (C) 1977,1978,1979,1980,1981,1984 BY DIGITAL EQUIPMENT CORP., MAYNARD, MASS.
VRRDA=010 ;FILE EDIT NUMBER
.IF NE FT.RDA
;DDB IS DEFINED IN DNTTY.P11 CAUSE IT LOOKS THE SAME (ALMOST) AS A TTY.
;
;IN FACT, RDA SERVICE IS MOSTLY DRIVEN AS A "TTY" DEVICE
RDASER: CMP #RDAMML,DB.MML(J) ; SEE IF MESSAGE IS TOO LONG
BHIS 10$ ; FINE
MOV #RDAMML,DB.MML(J) ; USE OUR LENGTH
10$: MOVB #B0,DB.DCM(J) ; IMAGE MODE FOR EVER
JSR PC,DVCCFM ; CONNECT CONFIRM IF NEEDED
BIT #DS.CON,(J) ; ARE WE STILL THERE ??
BNE 20$ ; YES, LETS GO TO IT
BIC #DS.XDS,@J ;CLEAR STATUS BIT IN CASE AUTO DIAL USING IT
RTS PC ; NO, THIS PACKET GETS TOSSED OUT
20$: JSR PC,DVXDRQ ; ASK FOR MORE DATA IF NEEDED
BIS #TS.IMI+TS.IMO,DB.DCS(J); REMIND ME THAT I AM IMAGE MODE
TST DB.OBF(J) ; DATA FROM 10??
BNE 27$ ; YES
JMP TTYICK ; USE DNTTY "INPUT" PROCESSING
27$: JMP TOGMSG ; USE DNTTY "OUTPUT" PROCESSING
;RDATIM: USES TTYTIM AND CTYTIM CODE
RDDZIN:
RDDHIN: BIT #DHROVR,R1 ; CHECK FOR OVERRUN
BNE 99$ ; YES, DUMP CHARS
BIT #DHRFER,R1 ; FRAME ERROR ??
BNE 99$ ; YES, DUMP THIS ONE ALSO
JSR PC,TTYINP ; USE TTY ROUTINE FOR TASK INTERFACE
99$: RTS PC ; DONE FOR NOW
RDDZOU=TTDZOU
RDDHOU=TTDHOU
.IF NE FT.TSK
.IF NE DN11N
;
;
; ROUTINE TO SET BITS FOR AN AUTO-DIAL LINE
;
DNSTA: BIT #40,DB.DVT(J) ;AUTO-DIAL LINE?
BEQ 99$ ;NO
BITB #DNDIAL,DB.DNS(J) ;DIAL STILL IN PROGRESS?
BNE 99$ ;YES,DON'T SET STATUS YET
MOV @(P),R0 ;GET BITS
BIS R0,DB.DNR(J) ;SET THE BITS IN STATUS WORD
99$: ADD #2,(P) ;BYPASS ARGUEMENT
RTS PC ;RETURN
;ROUTINE TO CHECK FOR A STATUS REQUEST IN RDXSER
;THESE REQUESTS WOULD NORMALLY BE SENT TO THE
;10 FOR TTY LINES.
RDXSTA: BIT #DS.XDS,@J ;NEED TO HANDLE STATUS CHANGE?
BEQ 35$ ;NO
BIC #DS.XDS,@J ;DON'T KEEP COMING THROUGH HERE
BIT #TS.DTR,DB.DCS(J) ;LINE ENABLE UP?
BNE 40$ ;YES, AUTODIAL ANSWER, OR A LINE DISCONNECT
MOV DB.LCB(J),R0
CMPB #LCS.LC,LC.STA(R0) ;LOST CARRIER?
BEQ 45$ ;YES
CMPB #LCS.HG,LC.STA(R0)
BEQ 45$ ;HUNG-UP
CMPB #LCS.RG,LC.STA(R0)
BNE 60$ ;FORGET IT RING NOT UP
BIS #TS.DTR,DB.DCS(J) ;WANT DTR. WILL BE DONE BY
;CLOCK DSR
JSR PC,DNSTA ;IF AUTO-DIAL,SET CALL ANSWERED
.WORD DNRANS
30$: JSR PC,WAKEPP ;WAKE THE APPROPRIATE TASKS
35$: RTS PC
40$: ;IF AUTO-DIAL THE CALL MAY HAVE BEEN ANSWERED
MOV DB.LCB(J),R0
CMPB #LCS.DF,LC.STA(R0) ;DIAL FAILED
BEQ 45$ ;YES
CMPB #LCS.LC,LC.STA(R0) ;LOST CARRIER?
BEQ 45$ ;YES
CMPB #LCS.HG,LC.STA(R0) ;HUNG UP
BNE 50$ ;NO
45$: JSR PC,DNSTA ;DROPPED CARRIER OR NEVER HAD CALL
;ANSERED IN FIRST PLACE
.WORD DNRERR+DNRENC ;NO CARRIER
BR 30$ ;WAKE UP TASK
50$: JSR PC,DNSTA ;SET CALL ANSWERED
.WORD DNRANS
BR 30$ ;WAKE TASK
60$: JSR PC,DNSTA ;SEND DN STATUS OF AUTO DIAL LINE
.WORD DNRERR+DNREAD ;AUTO DIAL FAILURE
BR 30$ ;INFORM TASK AND CONTINUE
.ENDC ;IF NE DN11N
.ENDC ;IF NE FT.TSK
.ENDC ;IF NE FT.RDA