Trailing-Edge
-
PDP-10 Archives
-
BB-F493Z-DD_1986
-
10,7/batlog.mac
There are 30 other files named batlog.mac in the archive. Click here to see a list.
TITLE BATLOG - GALAXY-10 Batch controller log file handler
SUBTTL C.D.O'Toole, D.P.Mastrovito /CDO/DPM 12-SEP-85
;
;
; COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION
; 1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1986.
; ALL RIGHTS RESERVED.
;
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED
; AND COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE
; AND WITH THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS
; SOFTWARE OR ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR
; OTHERWISE MADE AVAILABLE TO ANY OTHER PERSON. NO TITLE TO
; AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE
; WITHOUT NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT
; BY DIGITAL EQUIPMENT CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY
; OF ITS SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY
; DIGITAL.
SEARCH BATMAC ;BATCON SYMBOLS
SEARCH GLXMAC ;GALAXY SYMBOLS
SEARCH QSRMAC ;QUASAR SYMBOLS
SEARCH ORNMAC ;ORION SYMBOLS
PROLOG (BATLOG) ;SET UP
%%.BAT==:%%.BAT ;FORCE VERSION INTO SYMBOL TABLE
TOPS10 <IF1,<PRINTX [Assembling GALAXY-10 BATLOG]>>
TOPS20 <IF1,<PRINTX [Assembling GALAXY-20 BATLOG]>>
GLOB <G$STRM,G$TIME,G$TMTX>
SUBTTL Table of contents
; TABLE OF CONTENTS FOR BATLOG
;
;
; SECTION PAGE
; 1. Table of contents......................................... 2
; 2. L$HEAD - Log file header.................................. 3
; 3. L$OUTC - Put a character in the log file.................. 4
; 4. L$OPEN - Open a log file.................................. 5
; 5. OPNERR - Log file open error routine...................... 6
; 6. L$IOER - Log file I/O error routine....................... 7
; 7. Log file disposition...................................... 8
; 8. NEWLOG - Generate a new log file name..................... 9
; 9. L$PLOG - Put a character in the log file with formatting.. 10
; 10. L$CHKP - Checkpoint the log file.......................... 11
; 11. Copy text into log file with special time stamps.......... 12
; 12. Miscellaneous routines.................................... 13
; 13. End....................................................... 14
SUBTTL L$HEAD - Log file header
; Put a header at the top of the log file
;
L$HEAD::PUSHJ P,HDRPAG ;SET UP THE HEADER PAGE
GETLIM S2,.JQLIM(R),UNIQ ;GET UNIQUE VALUE
MOVEI P1,[ASCIZ/No/] ;ASSUME NO
CAIE S2,%EQUNO ;IS IT UNIQUE
MOVEI P1,[ASCIZ/Yes/] ;YES, SAY SO
MOVEI P2,[ASCIZ/No/] ;ASSUME NOT RESTARTABLE
GETLIM S2,.JQLIM(R),REST ;GET RESTART FIELD
SKIPN S1,.JBCRQ(R) ;ANY CHECKPOINT INFO
SKIPA ;NO..CHECK VALUE NOW
TXNN S1,<BA.ORQ!BA.URQ!BA.CHK> ;WAS IT REQ OR CHKPNT
CAIE S2,%EQRNO ;CHECK IF RESTARTABLE
MOVEI P2,[ASCIZ/Yes/] ;RESTARTABLE.. SAY YES
MOVEI T4,[ASCIZ/Log/] ;DEFAULT TO LOG
GETLIM S1,.JQLIM(R),OUTP ;GET OUPUT VALUE
CAIN S1,%EQOLE ;/OUT:ERROR
MOVEI T4,[ASCIZ/Error/] ;YES
CAIN S1,%EQONL ;/OUT:Nolog
MOVEI T4,[ASCIZ/Nolog/] ;YES
GETLIM S1,.JQLIM(R),TIME ;GET TIME LIMIT
PUSHJ P,B$STIM## ;CONVERT TO READABLE TEXT
GETLIM S1,.JQLIM(R),BLOG ;GET LOG OPTIONS FOR WRITING
MOVEI S2,[ASCIZ/Append/] ;DEFAULT IS APPEND
CAIN S1,%BAPND ;APPEND..
JRST HEAD.1 ;YES
CAIN S1,%BSCDE ;SUPERSEDE
MOVEI S2,[ASCIZ/Supersede/] ;SET TO SUPERSEDE
CAIN S1,%BSPOL ;OR CREATE IN SPOOL AREA
MOVEI S2,[ASCIZ/Spool /] ;SET SPOOL
HEAD.1: GETLIM S1,.JQLIM(R),OINT ;OPERATOR INTERVENTION FIELD
MOVEI P4,[ASCIZ/Yes/] ;ALLOWED..DEFAULT
CAIE S1,.OPINY ;YES
MOVEI P4,[ASCIZ/No/] ;NOT ALLOWED
MOVEI P3,[ITEXT (<Default>)] ;ASSUME NO CORE LIMIT
SKIPE G$CORE## ;CORE LIMITS ENFORCED ?
MOVEI P3,[ITEXT (<^D/.JQLIM+1(R),LHMASK/ pages>)] ;YES
$TEXT (L$PHDR,< ^H/[-1]/
BATCON Version ^V/[%%.BAT]/ GLXLIB Version ^V/[GLXVRS]/
^R/.JQJBB(R)/ in stream ^D/G$STRM(S)/
OUTPUT: ^T/(T4)/^T/TAB4/TIME-LIMIT: ^T/G$TMTX/
UNIQUE: ^T/(P1)/^T/TAB4/BATCH-LOG: ^T/(S2)/
RESTART: ^T/(P2)/^T/TAB4/ASSISTANCE: ^T/(P4)/
CORE: ^I/(P3)/^T/TAB3/SEQUENCE: ^D/.JQJBB+JIB.SQ(R),JB.SEQ/
>)
MOVEI T1,[ITEXT (<>)] ;ASSUME NOT /DISPOSE:RENAME FOR CTL
MOVEI T2,[ITEXT (<>)] ;ASSUME NOT /DISPOSE:RENAME FOR LOG
TOPS10 < ;TOPS-10 ONLY
MOVX S1,FP.REN ;GET RENAMED BIT
TDNE S1,.JQCFP+.FPINF(R) ;IS IT LIT FOR CTL ?
MOVEI T1,[ITEXT (< (^W/.JQCFP+.FPONM(R)/.^W/.JQCFP+.FPOXT(R)/)>)]
TDNE S1,.JQLFP+.FPINF(R) ;IS IT LIT FOR LOG ?
MOVEI T2,[ITEXT (< (^W/.JQLFP+.FPONM(R)/.^W/.JQLFP+.FPOXT(R)/)>)]
> ;END OF TOPS-10 CONDITIONAL
TXNN F,FL.KST ;KSYS STREAM?
$TEXT (L$PHDR,<
Control file: ^F/.JQCFD(R)/^I/(T1)/^A>)
$TEXT (L$PHDR,<
Log file: ^F/.JQLFD(R)/^I/(T2)/
>)
PUSHJ P,U$LOGH## ;APPEND ANY SPECIAL CUSTOMER TEXT
$RETT ;RETURN
TAB3: ASCIZ/ / ;3 TABS
TAB4: ASCIZ/ / ;4 TABS
; Set up the log file header page
;
HDRPAG: $CALL M%GPAG ;GET A PAGE
MOVEM S1,.JLHDR(R) ;REMEMBER IT
HRLI S1,(POINT 7) ;MAKE A BYTE POINTER
MOVEM S1,G$TPTR## ;SAVE IT
MOVEI S1,<PAGSIZ*5>-1 ;COMPUTE CHARACTER COUNT
MOVEM S1,G$TCTR## ;SAVE IT
POPJ P, ;RETURN
; Store a character in the log file header page
;
L$PHDR::SOSLE G$TCTR## ;COUNT
IDPB S1,G$TPTR## ;SAVE CHARACTER
$RETT ;Return
SUBTTL L$OUTC - Put a character in the log file
L$OUTC::TXNN R,RL.NLG ;LOG FILE AVAILABLE ?
SKIPN .JLIFN(R) ;IS LOG FILE OPENED ?
$RETT ;NOPE
PUSH P,S1 ;SAVE S1
PUSH P,S2 ;SAVE S2
MOVE S2,S1 ;COPY CHARACTER
MOVE S1,.JLIFN(R) ;GET THE IFN
$CALL F%OBYT ;OUTPUT CHARACTER
SKIPT ;OUTPUT ERROR?
MOVEM S1,.JLECD(R) ;SAVE ERROR CODE
POP P,S2 ;RESTORE S2
POP P,S1 ;RESTORE S1
SKIPF ;ANY ERRORS ?
$RETT ;NO
TXO R,RL.NLG ;MARK LOG FILE UNAVAILABLE
TXZ R,RL.OPR!RL.DIA ;CLEAR SOME FLAGS
$RETF ;RETURN FALSE
SUBTTL L$OPEN - Open a log file
L$OPEN::MOVEI S1,.JQLFD(R) ;GET LOG FILE DESCRIPTOR BLOCK
MOVEM S1,FOB.FD+.JLFOB(R) ;STORE IT
MOVEI S1,7 ;7 BIT BYTES
MOVEM S1,FOB.CW+.JLFOB(R) ;STORE CONTROL WORD
MOVE S1,.JQLFP+.FPINF(R) ;GET FILE PARAMETERS
TXNE S1,FP.SPL ;IS THE SPOOL BIT ON ?
JRST OPEN.1 ;YES - SKIP IN BEHALF STUFF
TOPS10 < ;TOPS-10 ONLY
MOVEI S1,.JLFAB(R) ;POINT TO FILE ATTRIBUTE BLOCK
MOVEM S1,FOB.AB+.JLFOB(R) ;SAVE
MOVEI S1,3 ;THREE WORDS
MOVEM S1,.JLFAB+0(R) ;SAVE IN FAB
MOVE S1,[10,,.FIACT] ;10 WORDS,,ACCOUNT STRING
MOVEI S2,.JQACT(R) ;POINT TO STRING
DMOVEM S1,.JLFAB+1(R) ;SAVE
MOVE S1,.JQPPN(R) ;GET USER'S PPN IN BEHALF
MOVEI S2,0 ;FOR CONSISTANCY
> ;END OF TOPS-10 CONDITIONAL
TOPS20 < ;TOPS-20 ONLY
HRROI S1,.JQNAM(R) ;GET POINTER TO USER'S NAME
HRROI S2,.JQCON(R) ;GET POINTER TO CONNECTED DIRECTORY
> ;END OF TOPS-20 CONDITIONAL
MOVEM S1,FOB.US+.JLFOB(R) ;SAVE PPN OR USER NAME POINTER
MOVEM S2,FOB.CD+.JLFOB(R) ;SAVE CONNECTED DIRECTORY (TOPS20 ONLY)
MOVX S1,FOB.SZ ;GET FILE OPEN BLOCK SIZE
MOVX T1,EQ.PRV ;LOAD PRIVILEGE FLAG
TDNE T1,.JQJBB+JIB.SQ(R) ;WAS IT SET ?
OPEN.1: MOVX S1,FOB.MZ ;USE MINIMUM SIZE BLOCK
MOVEI S2,.JLFOB(R) ;POINT TO THE FILE OPEN BLOCK
MOVX T1,<$CALL F%AOPN> ;ASSUME /BATLOG:APPEND
SKIPE T2,.JBCRQ(R) ;BATCH JOB RESTARTED ?
JRST OPEN.2 ;YES - ALWAYS APPEND TO EXISTING FILE
GETLIM T2,.JQLIM(R),BLOG ;GET VALUE OF /BATLOG
CAIN T2,%BSCDE ;WAS IT SUPERCEDE ?
MOVX T1,<$CALL F%OOPN> ;YES - DO A SUPERCEDING OPEN
OPEN.2: XCT T1 ;OPEN THE LOG FILE
JUMPF OPNERR ;LOG FILE ERROR
MOVEM S1,.JLIFN(R) ;SAVE IFN
TOPS10 < ;TOPS-10 ONLY
MOVX S2,-1 ;WE WANT THE EXACT FD
$CALL F%FD ;GET IT
MOVE S2,.FDSTR(S1) ;GET THE STRUCTURE NAME
SKIPF ;SHOULD NEVER HAPPEN BUT...
MOVEM S2,.JQLFD+.FDSTR(R) ;SET IT
> ;END OF TOPS-10 CONDITIONAL
TOPS20 < ;TOPS-20 ONLY
MOVX S2,FI.CHN ;LOAD A FUNCTION CODE
$CALL F%INFO ;GET THE CHANNEL NUMBER
HRROI S2,.JQACT(R) ;POINT TO THE ACCOUNT STRING
SACTF ;SET THE ACCOUNT FOR THE USER
JFCL ;IGNORE ERRORS
> ;END OF TOPS-20 CONDITIONAL
OPEN.3: MOVE S1,.JLIFN(R) ;GET THE IFN
MOVX S2,FI.SIZ ;LOAD FUNCTION CODE
$CALL F%INFO ;GET FILE SIZE
MOVEI T1,[ITEXT (<>)] ;ASSUME FILE IS EMPTY
SKIPE S1 ;FILE ALREADY EXIST ?
MOVEI T1,[ITEXT (<^M^L^A>)] ;SEPARATE DATA FROM PREVIOUS STREAM
$TEXT (L$OUTC,<^I/(T1)/^T/@.JLHDR(R)/^A>) ;WRITE LOG FILE HEADER
MOVE S1,.JLHDR(R) ;GET HEADER PAGE ADDRESS
$CALL M%RPAG ;DESTROY THE PAGE
TOPS10 < ;TOPS-10 ONLY
MOVE T2,.JQLFD+.FDSTR(R) ;GET THE LOG FILE DEVICE
CAMN T2,[SIXBIT/NUL/] ;IS IT NUL: ?
> ;END OF TOPS-10 CONDITIONAL
TOPS20 < ;TOPS-20 ONLY
MOVE T2,.JQLFD+.FDFIL(R) ;GET THE LOG FILE DEVICE
AND T2,[-1,,777400] ;WAS IT NUL: ?
CAMN T2,[ASCII /NUL:/] ;IS IT "NUL"?
> ;END OF TOPS-20 CONDITIONAL
TXO F,FL.NUL ;YES - REMEMBER IT
MOVE S1,.JLIFN(R) ;GET THE IFN BACK
$RETT ;AND RETURN
SUBTTL OPNERR - Log file open error routine
OPNERR: TXOE F,FL.LFE ;BEEN HERE BEFORE ?
JRST OPNE.1 ;YES - ONCE IS ENOUGH
$WTO (<Batch error>,<^R/.JQJBB(R)/^I/OPNTXT/>,.JQOBJ(R),<$WTNOD(.JQLOC(R))>)
$IDHDR (BATLOE,<? Batch log file error - ^I/LOGERR/^A>)
PUSHJ P,L$GENL ;GENERATE A NEW LOG FILE NAME
MOVX S1,FP.DEL!FP.SPL ;GET DELETE AND SPOOL BITS
IORM S1,.JQLFP+.FPINF(R) ;STORE IN FLAG WORD
PUSHJ P,L$OPEN ;TRY TO OPEN THE TEMPORARY LOG FILE
$IDENT (BATTLF,<[A temporary log file ^F/.JQLFD(R)/ will be created printed and deleted]>)
MOVX S1,%EQOLG ;FORCE /OUTPUT:LOG
STOLIM S1,.JQLIM(R),OUTP ;STORE NEW VALUE
JRST OPNE.2 ;GO TO COMMON ENDING
OPNE.1: $WTO (<Batch error>,<^R/.JQJBB(R)/^I/FNDLMS/>,.JQOBJ(R),<$WTNOD(.JQLOC(R))>)
OPNE.2: TXZ R,RL.OPR!RL.DIA ;CLEAR SOME POSSIBLE FLAGS
TXO R,RL.JIE ;MARK JOB IN ERROR
PJRST CLOSJB## ;DISMISS THE JOB
OPNTXT: ITEXT (<^M^J^I/LOGERR/
A temporary log file will be created, printed and
deleted for this user. The job will be canceled.>)
FNDLMS: ITEXT (<
Log error recovery failed
^I/LOGERR/>)
LOGERR:: ITEXT (<^E/[-1]/ for ^F/.JQLFD(R)/>)
SUBTTL L$IOER - Log file I/O error routine
; This routine is called whenever log file error checking occurs
;
L$IOER::$WTO (<Batch error>,<^R/.JQJBB(R)/^I/LOETXT/>,.JQOBJ(R),<$WTNOD(.JQLOC(R))>)
JRST CLOSJB## ;DISMISS THE JOB
LOETXT: ITEXT (<
Log file output error for ^F/.JQLFD(R)/; ^E/.JLECD(R)/>)
SUBTTL Log file disposition
; Delete an unopened log file
;
L$DLET::MOVEI S1,FOB.SZ ;GET FOB SIZE
MOVEI S2,.JLFOB(R) ;GET FOB ADDRESS
$CALL F%DEL ;DELETE THE FILE
JUMPT .POPJ ;RETURN UNLESS AN ERROR OCCURED
$WTO (<Batch error>,<^R/.JQJBB(R)/^I/DELTXT/>,.JQOBJ(R),<$WTNOD(.JQLOC(R))>)
POPJ P, ;RETURN
DELTXT: ITEXT (<^M^J
Cannot delete log file ^F/.JQLFD(R)/; ^E/[-1]/>)
; Reset and close log file
;
L$RREL::SKIPA S2,[F%RREL] ;RESET/CLOSE ROUTINE
; Close log file
;
L$CLOS::MOVX S2,F%REL ;CLOSE ROUTINE
CLOS.1: SKIPN S1,.JLIFN(R) ;WAS THE FILE OPENED ?
$RETT ;NO - JUST RETURN
$CALL (S2) ;CLOSE THE FILE
SETZM .JLIFN(R) ;MARK IFN CLOSED
SKIPT ;ERRORS CLOSING CHANNEL OR JFN ?
$WTO (<Batch error>,<^R/.JQJBB(R)/^I/CLSTXT/>,.JQOBJ(R),<$WTNOD(.JQLOC(R))>)
$RETT ;RETURN
CLSTXT: ITEXT (<
Errors closing ^F/.JQLFD(R)/>)
SUBTTL L$GENL - Generate a new log file name
L$GENL::
TOPS10 <MSTIME S1,> ;GET LOTS OF PRECISION
TOPS20 <$CALL I%NOW> ;GET CURRENT UDT
AND S1,[000707,,070707] ;MAKE IT NUMERIC
TDO S1,[SIXBIT/B00000/] ;TURN ON SOME BITS
TOPS10 < ;TOPS-10 ONLY
MOVEM S1,.JQLFD+.FDNAM(R) ;SAVE FILE NAME
MOVSI S1,'LOG' ;GET EXTENSION
MOVEM S1,.JQLFD+.FDEXT(R) ;SAVE IT
MOVE S2,[%LDQUS] ;GET QUEUE STRUCTURE
GETTAB S2, ;FROM THE MONITOR
MOVSI S2,'SSL' ;DEFAULT
MOVEM S2,.JQLFD+.FDSTR(R) ;STORE IT
MOVE S2,G$SPLD## ;GET PPN OF SPOOLED FILE AREA
MOVEM S2,.JQLFD+.FDPPN(R) ;STORE IT
SETZM .JQLFD+.FDPAT(R) ;TERMINATE PATH
MOVX S2,FDMSIZ ;GET FD LENGTH
STORE S2,.JQLFD+.FDLEN(R),FD.LEN ;SAVE IT
POPJ P, ;RETURN
> ;END OF TOPS-10 CONDITIONAL
TOPS20 < ;TOPS-20 ONLY
HRLI S2,(POINT 7,0) ;MAKE A BYTE POINTER
HRRI S2,.JQLFD+1(R) ;TO BUILD THE FILE SPEC
MOVEM S2,G$TPTR## ;SAVE IT
$TEXT (FILNAM,<PS:[SPOOL]^W/S1/.LOG^0>) ;STORE B?????
HRRZ S2,G$TPTR## ;GET LAST ADDRESS IN THE FILESPEC
SUBI S2,.JQLFD-1(R) ;ADJUST THE LENGTH OF THE BLOCK
STORE S2,.JQLFD(R),FD.LEN ;STORE IT
POPJ P, ;RETURN
> ;END OF TOPS-20 CONDITIONAL
; Character storage for TOPS-20 L$GENL
;
FILNAM: IDPB S1,G$TPTR## ;STORE THE BYTE
$RETT ;RETURN
SUBTTL L$PLOG - Put a character in the log file with formatting
; This routine will convert control characters to up-arrow format
; and handle overprinting
;
L$PLOG::CAIL S1," " ;A CONTROL CHARACTER ?
JRST PLOG.1 ;NO - JUST OUTPUT IT NORMALLY
CAXG S1,.CHCRT ;CODES .CHTAB - .CHCRT ARE IMAGE OUTPUT
CAXGE S1,.CHTAB ;LINE PRINTERS KNOW ABOUT THOSE
SKIPA ;NOT ONE OF THOSE
JRST PLOG.1 ;JUST OUTPUT THE CHARACTER
HRLM S1,(P) ;SAVE CHARACTER
MOVEI S1,"^" ;GET AN UP-ARROW
PUSHJ P,PLOG.1 ;LOG IT
HLRZ S1,(P) ;GET THE CHARACTER
MOVEI S1,100(S1) ;MAKE IT READABLE ASCII
PUSHJ P,PLOG.1 ;OUTPUT IT
HLRZ S1,(P) ;GET THE ORIGINAL AGAIN
POPJ P, ;RETURN
PLOG.1: TXZN F,FL.CFP ;WAS LAST CHARACTER A <CR> ?
JRST PLOG.2 ;NO - JUST LOG IT
CAXG S1,.CHFFD ;CHECK FOR <CR> NOT FOLLOWED BY EOL
CAXGE S1,.CHLFD ;SAME CHECK AS BELOW FOR TIME STAMP
SKIPA ;NOT VERTICAL MOTION
JRST PLOG.3 ;OUTPUT THE MOTION CHARACTER
PUSH P,S1 ;SAVE CHARACTER
MOVX S1,.CHTAB ;GET A <TAB>
PUSHJ P,L$OUTC ;LOG IT
PUSHJ P,L$OUTC ;AGAIN
POP P,S1 ;RESTORE CHARACTER
JRST PLOG.3 ;ONWARD
PLOG.2: CAIG S1,.CHFFD ;WAS IT A VERTICAL
CAIGE S1,.CHLFD ; MOTION CHARACTER ?
JRST PLOG.3 ;NOPE
PUSH P,S1 ;SAVE CHARACTER
MOVEI S1,.CHCRT ;GET <CR>
PUSHJ P,L$OUTC ;LOG IT
POP P,S1 ;RESTORE CHARACTER
PUSHJ P,L$OUTC ;OUTPUT THE CHARACTER
$RETT ;AND RETURN
PLOG.3: SKIPE .JLTIM(R) ;NEED A TIME STAMP
PUSHJ P,L$LSTP ;YES, DO IT
CAIN S1,.CHCRT ;IS THIS A CARRAIGE RETURN
TXO F,FL.CFP ;YES - MARK FOR OVERPRINTING
PUSHJ P,L$OUTC ;OUTPUT THE CHARACTER
CAXG S1,.CHFFD ;CHECK IF IT WAS VERTICAL PAPER MOTION
CAXGE S1,.CHLFD ;THOSE CAUSE A TIME STAMP
$RETT ;NO MOTION..RETURN
SETOM .JLTIM(R) ;NEXT LINE NEEDS A TIME STAMP
$RETT ;RETURN
SUBTTL L$CHKP - Checkpoint the log file
L$CHKP::SKIPN S1,.JLIFN(R) ;IS LOG FILE OPEN ?
POPJ P, ;NO - IGNORE REQUEST
$CALL F%CHKP ;CHECKPOINT THE FILE
SKIPF ;CAN'T
$RETT ;RETURN
MOVEM S1,.JLECD(R) ;SAVE ERROR CODE
$WTO (<Batch error>,<^R/.JQJBB(R)/^I/CHKTXT/>,.JQOBJ(R),<$WTNOD(.JQLOC(R))>)
TXO R,RL.NLG ;NO LOG FILE AVAILABLE
$RETF ;RETURN FALSE
CHKTXT: ITEXT (<
Log file checkpoint failure.
^I/LOGERR/
Job canceled.>)
SUBTTL Copy text into log file with special time stamps
; This routine will copy any text into the log file and stamp each line.
; Call: MOVE S1,$IDENT instruction to stamp line
; MOVE S2,byte pointer to or address of text
; PUSHJ P,L$COPY
;
L$COPY::$SAVE <P1,P2> ;SAVE SOME ACS
DMOVE P1,S1 ;COPY $IDENT AND BYTE POINTER
HLRE S1,P2 ;GET LH
CAIE S1,0 ;JUST ADDRESS OF TEXT ?
CAMN S1,[-1] ;OR TOPS-20 JUNK (-1,,ADDR) ?
HRLI P2,(POINT 7) ;MAKE IT A BYTE POINTER
COPY.1: MOVE S2,P2 ;GET BYTE POINTER
ILDB S1,S2 ;LOOK AT NEXT CHARACTER
JUMPE S1,.POPJ ;NO STAMP IF NO MORE CHARACTERS
XCT P1 ;STAMP LINE
COPY.2: ILDB S1,P2 ;GET A CHARACTER
JUMPE S1,.POPJ ;DONE ?
CAIG S1,.CHFFD ;CHECK FOR <LF>, <VT>
CAIGE S1,.CHLFD ; OR <FF>
SKIPA ;NOT EOL
JRST COPY.1 ;STAMP LINE
CAIG S1,"Z"+40 ;ONLY ALLOW
CAIGE S1," " ; PRINTING CHARACTERS
JRST COPY.2 ;LOOP FOR MORE
PUSHJ P,L$OUTC ;LOG IT
JRST COPY.2 ;LOOP FOR MORE
SUBTTL Miscellaneous routines
; Add time stamp and line identifier
;
L$LSTP::SETZM .JLTIM(R) ;CLEAR TIME STAMP NEEDED FLAG
TXNE J,JL.UML ;JOB AT MONITOR LEVEL ?
$TEXT (L$OUTC,<^T/G$TIME/ MONITR ^A>)
TXNN J,JL.UML ;JOB AT USER LEVEL ?
$TEXT (L$OUTC,<^T/G$TIME/ USER ^A>)
POPJ P, ;RETURN
; Add a CRLF
;
L$CRLF::MOVX S1,.CHCRT ;THE CARRIAGE RETURN
PUSHJ P,L$PLOG ;OUTPUT IT
MOVX S1,.CHLFD ;AND THE LINE FEED
PJRST L$PLOG ;AND EXIT THROUGH PUTLOG
; Add a TAB
;
L$LTAB::MOVX S1,.CHTAB ;AND ANOTHER ONE
PJRST L$PLOG ;OUTPUT THE PERIOD
SUBTTL End
END