Trailing-Edge
-
PDP-10 Archives
-
BB-F493Z-DD_1986
-
10,7/dcncsp/fal.doc
There is 1 other file named fal.doc in the archive. Click here to see a list.
FAL.DOC -- Changes from V1 to V2(37)
May 1985
COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1985,1986. ALL RIGHTS
RESERVED.
THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
TRANSFERRED.
THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
CORPORATION.
DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
FAL.DOC Page 2
FAL.DOC -- Changes from V1 to V2(37)
May 1985
1.0 SUMMARY
FAL is the network File Access Listener, which provides a file server
to network processes within a DECnet network. Interaction with FAL is
implied whenever a network user attempts access to files on systems
other than his local system. FAL version 2 requires TOPS-10 version
7.02 or later and Galaxy version 5 or later.
FAL has undergone major modifications from version 1 to 2(27). This
includes the addition of multithreaded operation and OPR/ORION/QUASAR
interface. FAL is no longer a component of the NFT/NIP/FAL program.
There is no longer a need to run one FAL job for each FAL server
desired; multiple FAL streams can be handled by a single job.
2.0 EXTERNAL CHANGES
While there are few changes to FAL that are visible to network file
users, there are many changes that are visible to the system operator
due to the inclusion of the OPR/ORION/QUASAR interface. As a result
of this interface, FAL no longer accepts commands from the controlling
terminal; all command processing is done via OPR. OPR may also be
used to list the status of all started FAL streams. A sample list of
FAL related OPR commands follows. All commands are documented in
detail in the Operator's Command Language Reference Manual.
OPR>SET FAL-STREAM 0:2 NETWORK DECNET
OPR>SET FAL-STREAM 3:5 NETWORK ANF10
OPR>DEFINE FILE-ACCESS REJECTION-LIST [1,2] ,NODEA::[1,*]
OPR>DEFINE FILE-ACCESS NETWORK-PPN [377777,377777]
OPR>START FAL-STREAM 0-5
OPR>SHOW STATUS FAL-STREAM
OPR>SHOW PARAMETERS FAL-STREAM
Additionally, FAL will log all connect/disconnect/reject events to OPR
and the operator log file.
One other change has been made to FAL which may be of major concern:
FAL will now reject all connections made on behalf of a user/PPN which
does not have the network file access privilege set in the user's
profile. This privilege bit can be given to a user via the REACT
program. If such a rejection occurs, FAL will log an error message to
OPR which explicitly states this as the reason for rejection.
3.0 KNOWN BUGS AND DEFICIENCIES
FAL may not run detached, as is the case with other Galaxy components.
FAL.DOC Page 3
There are non-fatal conditions under which FAL's I/O library routines
will OUTSTR error messages to the FAL job's controlling terminal,
which would cause the job to block if it were running detached. Until
this is corrected, it is recommended that FAL be run as an OPSER
subjob.
Node/PPN rejection lists cannot contain wildcarded node name
specifications (as with the old FAL) due to restrictions in OPR's
parsing routines.
4.0 INSTALLATION INSTRUCTIONS
FAL.MAC must be compiled with the following universal files on UNV:
MACTEN, UUOSYM, SWIL, GLXMAC, QSRMAC, ORNMAC, ACTSYM and JOBDAT, and
is loaded with REL:GLXLIB.REL and REL:SWIL.REL.
.LOAD FAL
.SAVE FAL
The system wide OPR.ATO file must be edited to log in an run FAL on an
OPSER subjob, as in:
:SLOGIN
:DEFINE FAL=
FAL-R FAL
Additionally, the OPR startup file (SYSTEM.CMD) should be edited to
configure and run the desired number of FAL streams. For example, to
start three streams serving DECnet and two streams serving ANF-10,
rejecting all access claiming to be [1,2] and declaring
[377777,377777] as the default network access PPN,
DEFINE FILE-ACCESS REJECTION-LIST [1,2]
DEFINE FILE-ACCESS DEFAULT-PPN [377777,377777]
SET FAL-STREAM 0:2 NETWORK DECNET
SET FAL-STREAM 3:4 NETWORK ANF
START FAL-STREAM 0:4
5.0 INTERNAL CHANGES
The largest internal changes to FAL were the addition of the
multithread schedular and the addition of the QUASAR interface. As a
result of these changes, FAL is no longer a component of the
NFT/NIP/FAL program, but runs as a standalone Galaxy component. The
source code for FAL is now contained in a single source file, FAL.MAC,
which loads with the standard network access library (SWIL), and
GLXLIB. Since these two libraries have different subroutine calling
and AC naming conventions, the code has been split into three
submodules within the source file: FALUNV, a universal file
containing all symbols definitions and macros global to the two code
segments, FALGLX, which contains the GLXLIB interface and the stream
FAL.DOC Page 4
scheduler, and FAL, which is the traditional network file access
listener. Other internal changes (by edit number) are:
6 Fix typo that broke RSX/RSTS/VAX non-wildcarded directory;
Do not generate a FOP field (at FFAD28), just "echo" back
whatever the remote has sent (keeps RSTS happy, probably the
right thing to do anyway).
11 Send ACK between each file for DIRECTORY LIST if talking to
a DAP protocol version 7 (or later) accessor.
12 A zero-length USERS.TXT file causes UTXINI to do a "random"
core allocation, typically resulting in ?PC out of bounds
(by deallocating part of the hi seg).
6.0 SUGGESTIONS
None.