Trailing-Edge
-
PDP-10 Archives
-
BB-F493Z-DD_1986
-
10,7/fefile.mac
There are 6 other files named fefile.mac in the archive. Click here to see a list.
TITLE FEFILE - ALLOCATE CONTIGUOUS SPACE ON A DISK FOR RSX20
SUBTTL E. SOCCI 9 AUG 76
;COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1976,1984,1986. ALL RIGHTS RESERVED.
;
;
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
;ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
;INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
;COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
;OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
;TRANSFERRED.
;
;THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
;AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
;CORPORATION.
;
;DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
;SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
SEARCH UUOSYM
SALL
VMAJOR==1
VMINOR==0
VCUST==0
VEDIT==27
LOC 137
BYTE (3)VCUST(9)VMAJOR(6)VMINOR(18)VEDIT
RELOC
COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1976,1986. ALL RIGHTS RESERVED.
\;END COPYRIGHT MACRO
;AC ASSIGNMENTS
S=0
T1=1
T2=2
T3=3
T4=4
P=17
;I/O CHANNELS
DSK==0
;SWITCHES
FTDEBUG==0
;PARAMETERS
PDSIZ==^D20
HOMBK1==^D1 ;FIRST HOM BLOCK LOCATION
HOMBK2==^D10 ;SECOND HOM BLOCK LOCATION
HOMNAM==0 ;PLACE TO CHECK FOR SIXBIT/HOM/
.RBSLF==177 ;PLACE IN RIB THAT HAS BLOCK NUMBER
HOMFEA==61 ;PLACE IN HOM BLOCK FOR LOGICAL BLOCK NUMBER OF FE AREA
HM$VAL==1B2 ;VALID BIT, MUST BE ON FOR HOMFEA TO BE CONSIDERED VALID
HOMFES==62 ;SIZE OF FE AREA IN BLOCKS
;FLAGS - LH
FL.DEL==1B0 ;DELETE FE.SYS ON AN ERROR IN PROGRAM
FL.NDL==1B1 ;FE.SYS EXISTS WITH NO DELETE BIT ON IN RIB
;FLAGS - RH
;MACRO DEFINITIONS
DEFINE FERROR(ARG)<JRST [OUTSTR [ASCIZ/? 'ARG
/]
JRST ERRXIT]>;END FERROR MACRO DEFINITION
DEFINE TELL(MSG)<OUTSTR [ASCIZ/MSG/]>
DEFINE TELLCR(MSG)<OUTSTR [ASCIZ/MSG
/]>
DEFINE GTAB(AC,ARG)<MOVE AC,[ARG]
GETTAB AC,
FERROR <CANNOT GETTAB 'ARG>
>;END GTAB MACRO DEFINITION
SUBTTL INITIALIZATION
FEFILE: JFCL ;IN CASE CCL START
RESET
SETZ S, ;CLEAR FLAGS
MOVE P,[IOWD PDSIZ,PDL] ;SETUP PDL POINTER
IFE FTDEBUG,<
GTAB T1,%LDSYS ;GET PPN FOR SYS
>;END IFE FTDEBUG
IFN FTDEBUG,<
SETZ T1,
>;END IFN FTDEBUG
DEFINE X(A)<MOVEM T1,A+.RBPPN>
X(DELBLK)
X(LUKBLK)
X(ENTBLK) ;SET SYS PPN FOR ALL FILE BLOCKS
GTAB T1,%CNVER ;GET MONITOR VERSION
ANDI T1,77700 ;JUST VERSION
CAIGE T1,60200 ;DON'T SCREW UP HOM BLOCKS IN OLD MONITORS
FERROR MONITOR VERSION MUST BE 602 OR GREATER TO WRITE IN HOM BLOCKS
GETUNI: TELL <DISK UNIT NAME:>
PUSHJ P,GETDEV ;GET THE NAME
JRST [TELLCR <% BAD DEVICE NAME SPECIFICATION>
JRST GETUNI] ;GET IT AGAIN
JUMPE T1,GETUNI ;IN CASE HE GAVE <CRLF>
PUSH P,T1 ;SAVE THE NAME
SYSPHY T1, ;MAKE SURE IT'S A PHYSICAL DISK
JRST [TELLCR <% NOT A PHYSICAL DISK UNIT>
POP P,(P) ;DISCARD SAVED NAME
JRST GETUNI]
POP P,T2 ;RESTORE DEVICE NAME TO T2
MOVE T1,[UU.DER+.IODMP] ;NO RETRIES, DUMP MODE
SETZ T3, ;NO BUFFER HEADERS
OPEN DSK,T1 ;TRY TO OPEN DEVICE
JRST [TELLCR <% CANNOT OPEN DESIGNATED DISK UNIT>
JRST GETUNI]
;MAKE SURE FE.SYS DOESN'T EXIST ALREADY. IF IT DOES, DELETING IT
; IS NOT A GOOD IDEA, SINCE THE 11 WILL BE WRITING IN SOMEONE'S -10
; FILE.
LOOKUP DSK,LUKBLK ;LOOK FOR FE.SYS
CAIA ;PROBABLY OK, BUT CHECK FOR FUNNY CODES
FERROR <FILE FE.SYS ALREADY EXISTS ON THAT DISK UNIT>
HRRZ T1,LUKBLK+.RBEXT ;GET ERROR CODE
JUMPE T1,ASKSOF ;JUMP IF FILE DID NOT EXIST
TELL <? LOOKUP ERROR >
PUSHJ P,OCTOUT ;GIVE ERROR CODE
TELLCR < FOR FE.SYS IN SYSTEM AREA>
JRST ERRXIT
;NOW ASK HOW BIG FE.SYS SHOULD BE
ASKSOF: TELL <SIZE OF FILE IN BLOCKS (<CRLF> GIVES DEFAULT OF 2000):>
PUSHJ P,GETDEC ;GET SIZE OF FILE
JRST [TELLCR <% BAD DECIMAL NUMBER SPECIFICATION>
JRST ASKSOF]
SKIPN T1 ;IF NO ANSWER GIVEN,
MOVEI T1,^D2000 ;MAKE IT 2000 BLOCKS LONG
ADDI T1,2 ;ALLOW FOR THE RIBS
MOVEM T1,FEFSIZ ;PUT IT INTO THE ENTER BLOCK IN .RBALC
SUBTTL MAKE FE.SYS, FILL IT WITH ZEROES AND LOOK FOR ERRORS
NFESYS: CLOSE DSK, ;CLOSE OFF CHANNEL
MAKFEF: ENTER DSK,ENTBLK ;MAKE FE.SYS
JRST ENTERR ;SOMETHING WENT WRONG, CHECK FOR PARTIAL ALLOCATION ERROR
TELL <[>
MOVE T1,FEFSIZ ;TELL USER HOW MUCH HE GETS FOR FREE
SUBI T1,2 ;ACCOUNT FOR RIBS
PUSHJ P,DECOUT
TELLCR < DATA BLOCKS ALLOCATED TO FE.SYS]>
MOVE T3,FEFSIZ ;SIZE OF FILE
SUBI T3,2 ;ACCOUNT FOR RIBS, SET TO LAST BLOCK NUMBER
FEFOUT: USETO DSK,(T3) ;WRITE LAST BLOCK NUMBER
OUT DSK,OIOWD ;OUTPUT A BLOCK AT A TIME
JRST FEODON ;OK
GETSTS DSK,T1 ;ERROR, GET FILE STATUS
TRNE T1,IO.DER+IO.DTE ;NORMAL ERRORS?
JRST FEFDEL ;YES, JUST TRY AGAIN
TELL <? UNRECOVERABLE OUTPUT ERROR, STATUS >
PUSHJ P,OCTOUT ;PRINT STATUS
TELLCR <> ;CRLF
JRST ERRXIT ;GO DELETE FE.SYS
;HERE ON ENTER ERROR CREATING FE.SYS, MAKE SURE ITS NOT PARTIAL ALLOCATION
ENTERR: HRRZ T1,ENTBLK+.RBEXT ;GET ERROR CODE
CAIN T1,ERPOA% ;PARITAL ALLOCATION?
FERROR <NOT ENOUGH CONTIGOUS SPACE ON UNIT FOR FE.SYS>
TELL <? ENTER ERROR >
PUSHJ P,OCTOUT ;NOT PARTIAL ALLOCATION, SAY WHAT IT IS
TELLCR < FOR FE.SYS ON SYSTEM AREA>
JRST ERRXIT
;HERE WHEN FE.SYS IS ALL WRITTEN OUT, CHECK FOR ERRORS
FEODON: CLOSE DSK, ;OK, CLOSE AND MAKE FE.SYS EXIST
TLO S,(FL.DEL) ;IF ERROR HAPPENS NOW, DELETE FE.SYS
LOOKUP DSK,LUKBLK ;LOOK IT UP AGAIN
JRST [TELL <? LOOKUP ERROR >
HRRZ T1,LUKBLK+.RBEXT ;GET CODE
PUSHJ P,OCTOUT
TELLCR < FOR NEWLY CREATED FE.SYS>
TLZ S,(FL.DEL) ;CAN'T LOOK IT UP TO DELETE IT
JRST ERRXIT]
;NOW INPUT ALL BLOCKS ONE AT A TIME AND LOOK FOR DATA ERRORS
FEFIN: SETZ T2, ;T2 HAS COUNT OF ERRORS
FEFIN1: IN DSK,IIOWD ;INPUT A BLOCK
JRST .-1 ;WAIT FOR EOF
GETSTS DSK,T1 ;GET STATUS
TRNE T1,IO.DER+IO.DTE ;DEVICE OR DATA ERROR?
AOS T2 ;YES, COUNT IT
TRNE T1,IO.ERR-IO.DER-IO.DTE ;OTHER ERRORS?
JRST [TELL <? UNUSUAL INPUT ERROR, STATUS >
PUSHJ P,OCTOUT
TELLCR <>
JRST ERRXIT]
TRNN T1,IO.EOF ;END OF FILE NOW?
JRST FEFIN2 ;NO, KEEP GOING
JUMPN T2,FEFDEL ;DONE NOW. IF ANY ERRORS, TRY A NEW FE.SYS
JRST FEPERM ;GO MAKE FE.SYS INVULNERABLE
FEFIN2: TRNE T1,IO.DER+IO.DTE ;ANY ERRORS COUNTED BEFORE?
SETSTS DSK,.IODMP ;YES, CLEAR THEM
JRST FEFIN1 ;AND CONTINUE TO READ
;NOW AN ERROR FREE FE.SYS EXISTS. CAST IN CONCRETE BY LIGHTING NO DELETE
; BIT. ALSO, LIGHT NO BACKUP BIT AND ALWAYS BAD CHECKSUM (SINCE IT WILL
; HAVE)
FEPERM: USETI DSK,0 ;GET SET TO READ PRIME RIB
IN DSK,IIOWD ;GET IT INTO IBUF
JRST .+2 ;OK
JRST [TELL <? ERROR READING FE.SYS RIB, STATUS >
GETSTS DSK,T1
PUSHJ P,OCTOUT
TELLCR <>
JRST ERRXIT]
CLOSE DSK, ;NOW PREPARE TO DO SUSET. FOR AN OUTPUT
MOVE T1,IBUF+.RBSLF ;GET BLOCK NUMBER TO UPDATE HOM BLOCKS
MOVEM T1,FEFPOS ;SAVE
TELL <[FE.SYS AREA STARTS AT LOGICAL BLOCK >
AOS T1 ;GET PAST RIB
PUSHJ P,DECOUT ;PRINT IN DECIMAL
TELLCR <.]>
MOVEI T1,RP.NDL+RP.NFS+RP.ABC ;NOW SET NO DELETE, NO BACKUP, AND ALWAYS BAD CHECKSUM
IORM T1,IBUF+.RBSTS ;SET IN THE RIB
MOVE T1,FEFPOS ;GET RIB BLOCK NUMBER
IOR T1,[SU.SOT+<DSK>B12] ;SETUP TO OUTPUT THE RIB
SUSET. T1, ;SET THE BLOCK, PUT CHANNEL IN SUPER I/O MODE
FERROR <SUSET. FAILURE TRYING TO WRITE FE.SYS RIB>
OUT DSK,IIOWD ;WRITE THE RIB
JRST .+2 ;OK
JRST [TELL <? OUTPUT ERROR WRITING FE.SYS RIB, STATUS >
GETSTS DSK,T1
PUSHJ P,OCTOUT
TELLCR <>
JRST ERRXIT]
TLO S,(FL.NDL) ;IN CASE WE GET TO ERRXIT, TELL IT TO CLEAR
; NO DELETE BIT BEFORE ATTEMPTING TO DELETE FE.SYS
;NOW UPDATE PROPER SLOTS IN HOM BLOCK SO -11 CAN FIND ITS AREA ON THE UNIT
SETZM HOMERR ;# OF ERRORS
MOVEI T1,HOMBK1 ;GET BLOCK # OF FIRST HOM BLOCK
PUSHJ P,UPDHOM
AOS HOMERR ;AN ERROR
MOVEI T1,HOMBK2 ;SECOND ALSO
PUSHJ P,UPDHOM
AOS HOMERR ;AN ERROR
MOVE T1,HOMERR ;GET NUMBER OF ERRORS
CAIL T1,2 ;IF 2 OR MORE ERRORS,
FERROR <CANNOT UPDATE EITHER HOM BLOCK SUCCESSFULLY, ABORTING>
TELLCR <[FRONT END FILE CREATED, HOM BLOCKS WRITTEN]>
RELEAS DSK, ;ALL DONE, RELEAS CHANNEL
EXIT 1,
JRST .-1
;HERE IF ERRORS ARE ENCOUNTERED EITHER WHILE WRITING FE.SYS OUT
; OR WHEN READING IT BACK IN. REPORT NUMBER OF BAD BLOCKS, CLOSE
; CHANNEL SO BAT BLOCKS WILL BE UPDATED AND GO BACK TO MAKFEF
; TO SUPERCEDE THE BAD FE.SYS.
FEFDEL: TELL <% >
MOVE T1,T2 ;GET NUMBER OF ERRORS IN T1
PUSHJ P,DECOUT ;PRINT IN DECIMAL
TELLCR < BAD BLOCK(S) ENCOUNTERED IN FRONT END FILE>
TELLCR <% RETRYING FRONT END FILE CREATION>
CLOSE DSK,
JRST MAKFEF ;GO TRY AGAIN
;ROUTINE TO PROCESS ERROR IN PROGRAM
; DELETE FE.SYS IF IT WAS CREATED
ERRXIT: TLNN S,(FL.DEL) ;WAS FE.SYS CREATED YET?
JRST ERRXI1 ;NO, SKIP FILE STUFF
SETSTS DSK,.IODMP ;MAKE SURE NO ERROR BITS ARE ON
TLNN S,(FL.NDL) ;FE.SYS EXIST WITH NO DELETE BIT ON?
JRST ERRXI0 ;EXISTS, BUT ITS VULNERABLE
CLOSE DSK, ;GET READY FOR SUPER I/O
MOVE T1,FEFPOS ;GET RIB BLOCK NUMBER
TLO T1,(<DSK>B12) ;PUT CHANNEL NUMBER IN
SUSET. T1, ;SET INPUT BLOCK
JRST [TELLCR <? SUSET. FAILURE WHILE TRYING TO CLEAR NO DELETE BIT IN FE.SYS RIB>
JRST ERRXI1] ;GIVE UP, CAN'T DO MUCH
IN DSK,IIOWD ;GET RIB
JRST .+2 ;OK
JRST [TELL <? INPUT ERROR FOR FE.SYS RIB, STATUS >
GETSTS DSK,T1
PUSHJ P,OCTOUT
TELLCR <>
JRST ERRXI1]
MOVEI T1,RP.NDL ;GET BIT TO CLEAR
ANDCAM T1,IBUF+.RBSTS ;CLEAR IT
MOVE T1,FEFPOS ;GET BLOCK NUMBER OF RIB AGAIN
TLO T1,(SU.SOT+<DSK>B12) ;SET UP FOR OUTPUT
SUSET. T1,
JRST [TELLCR <? SUSET. FAILURE WHILE TRYING TO CLEAR NO DELETE BIT IN FE.SYS>
JRST ERRXI1]
OUT DSK,IIOWD ;WRITE RIB BACK OUT
JRST .+2 ;OK
JRST [TELL <? OUTPUT FAILURE WHILE TRYING TO CLEAR NO DELETE BIT FOR FE.SYS, STATUS >
GETSTS DSK,T1
PUSHJ P,OCTOUT
TELLCR <>
JRST ERRXI1]
ERRXI0: LOOKUP DSK,LUKBLK ;GET FE.SYS ON THE CHANNEL
JRST [TELLCR <% CAN'T DELETE FE.SYS>
JRST ERRXI1]
RENAME DSK,DELBLK ;DELETE IT
JRST [TELLCR <% CAN'T DELETE FE.SYS>
JRST ERRXI1]
RELEAS DSK, ;MAKE CHANNEL GO AWAY
ERRXI1: EXIT 1,
JRST .-1
SUBTTL SUBROUTINES
;ROUTINE TO UPDATE HOM BLOCKS, CALL WITH BLOCK NUMBER IN T1
; SKIP RETURN IF ALL IS OK, NON-SKIP IF READ OR WRITE ERROR
UPDHOM: MOVE T2,T1 ;GET BLOCK NUMBER
TLO T2,(<DSK>B12) ;PUT IN CHANNEL FOR SUSET.
SUSET. T2, ;DO IT
FERROR <SUSET. ERROR WHILE TRYING TO READ HOM BLOCKS>
IN DSK,IIOWD ;GET HOM BLOCK IN CORE
CAIA ;OK
JRST [TELL <% HOM BLOCK READ ERROR, BLOCK >
PUSHJ P,DECOUT
TELL <., STATUS >
GETSTS DSK,T1
PUSHJ P,OCTOUT
SETSTS DSK,.IODMP ;CLEAR ERRORS
TELLCR <>
POPJ P,]
MOVE T2,[SIXBIT/HOM/];MAKE SURE ITS A REAL HOM BLOCK
CAME T2,IBUF+HOMNAM ;IS IT?
JRST [TELL <% HOM BLOCK CONSISTENCY ERROR, BLOCK >
PUSHJ P,DECOUT
TELLCR <.>
POPJ P,]
MOVE T2,FEFPOS ;GET POSITION OF RIB OF FE.SYS
AOS T2 ;POINT TO FIRST DATA BLOCK
PUSHJ P,SPLTWD ;CONVERT TO -11 FORMAT
TLO T2,(HM$VAL) ;SAY ITS VALID
MOVEM T2,IBUF+HOMFEA ;PUT IN ADDRESS WORD
MOVE T2,FEFSIZ ;GET SIZE OF ENTIRE FE.SYS
SUBI T2,2 ;ACCOUNT FOR PRIME AND SPARE RIBS
PUSHJ P,SPLTWD ;SPLIT WORD INTO HALFWORDS FOR -11
MOVEM T2,IBUF+HOMFES ;PLACE IN HOM BLOCK
MOVE T2,T1 ;GET BLOCK NUMBER AGAIN
TLO T2,(SU.SOT+<DSK>B12) ;SET FOR OUTPUT SUSET.
SUSET. T2,
FERROR <SUSET. ERROR WHILE TRYING TO WRITE HOM BLOCKS>
OUT DSK,IIOWD ;FROM SAME BUFFER
CAIA ;OK
JRST [TELL <% HOM BLOCK WRITE ERROR, BLOCK >
PUSHJ P,DECOUT
TELL <., STATUS >
GETSTS DSK,T1
PUSHJ P,OCTOUT
SETSTS DSK,.IODMP ;CLEAR ERRORS
TELLCR <>
POPJ P,]
JRST CPOPJ1 ;GIVE SUCCESS RETURN
;ROUTINE TO SPLIT UP 36 BIT -10 WORD INTO TWO 16 BIT QUANTITIES, IN
; HALF WORDS
SPLTWD: LDB T3,[POINT 16,T2,35-16] ;GET SECOND 16 BITS
ANDI T2,177777 ;MASK OFF ALL BUT FIRST 16 BITS
HRL T2,T3 ;MAKE HALF-WORDS SO -11 CAN SEE ALL
POPJ P, ;RETURN
;OUTPUT ROUTINES
DECOUT: SKIPA T4,[^D10]
OCTOUT: MOVEI T4,^D8
RADOUT: IDIV T1,T4
HRLM T2,(P) ;SAVE
SKIPE T1 ;SKIP IF END
PUSHJ P,RADOUT ;NOT
HLRZ T1,(P) ;GET
ADDI T1,"0" ;CONVERT TO ASCII
OUTCHR T1 ;PRINT
POPJ P,
;GET RADIX INPUT
GETDEC: SKIPA T4,[^D10]
GETOCT: MOVEI T4,^D8
SETZ T1, ;T1 WILL HAVE RESULT
GETOC1: PUSHJ P,GETCHR ;GET CHAR FROM TTY
CAIL T2,"0" ;LEGAL OCTAL NUMBER?
CAILE T2,"0"(T4)
JRST GETOC2 ;NO, SEE IF BREAK CHAR
IMUL T1,T4 ;TIMES RADIX
ADDI T1,-"0"(T2) ;ADD IN
JRST GETOC1
GETOC2: PUSHJ P,NOTBRK ;BREAK?
JRST COMFIN ;YES
JRST COMERR ;NO, BARF
;ROUTINE TO GET SIXBIT DEVICE NAME
GETDEV: SETZ T1, ;CLEAR RESULT
MOVE T3,[POINT 6,T1] ;BYTE POINTER
GETDV1: PUSHJ P,GETCHR ;GET INPUT CHAR IN T2
CAIN T2,":" ;COLON OR
JRST GETDV3
PUSHJ P,NOTBRK ;BREAK IS DELIMITER
JRST COMFIN ;OK
SUBI T2," "-' ' ;CONVERT ASCII TO SIXBIT
CAIL T2,0 ;MAKE SURE ITS LEGAL SIXBIT
CAILE T2,77 ;IN RANGE?
JRST COMERR ;NO
GETDV2: IDPB T2,T3 ;STORE ANOTHER CHAR IN T1
TLNN T3,770000 ;OUT OF ROOM?
SETZ T3, ;YES, STOP STORING, BUT STILL CHECK
JRST GETDV1 ;CONTINUE
GETDV3: PUSHJ P,GETCHR ;GET NEXT CHAR, BETTER BE BREAK
PUSHJ P,NOTBRK ;IS IT BREAK?
JRST COMFIN ;YES, OK
JRST COMERR ;NO, ERROR
;ROUTINE TO SKIP IF CHAR IN T2 IS NOT A BREAK CHAR
DEFINE X(A),<IRP A,<BRKMSK==BRKMSK+1B<^O'A>>>
BRKMSK==0
X(<7,12,13,14,32,33>)
NOTBRK: MOVE T4,[BRKMSK]
LSH T4,(T2)
SKIPL T4
CPOPJ1: AOS (P)
CPOPJ: POPJ P,
;HERE IF INPUT ACCEPTED AND NO ERRORS, TYPE CRLF AND RETURN CPOPJ1
COMFIN: TELLCR <>
JRST CPOPJ1
;HERE IF ERROR DETECTED, GIVE ERROR RETURN, CLEAR TTY INPUT BUFFER
COMERR: CLRBFI
TELLCR <>
POPJ P,
;ROUTINE TO GET ONE CHAR FROM TTY INTO T2
GETCHR: INCHWL T2
CAIN T2,15
JRST GETCHR
POPJ P,
SUBTTL LOOKUP/ENTER/RENAME/DELETE BLOCKS
LUKBLK: .RBSTS
0 ;PPN
SIXBIT/FE/ ;NAME
SIXBIT/SYS/ ;EXTENSION
0 ;PROTECTION
BLOCK ^D13 ;OTHER STUFF
;BLOCK USED TO CREATE FE.SYS
ENTBLK: .RBSTS
0 ;PPN, FILLED IN AT INITIALIZATION
SIXBIT/FE/
SIXBIT/SYS/
XWD 157000,0 ;PROTECTION
EXP 0,0,0
0 ;.RBEST, SHOULD BE ZERO
FEFSIZ: 0 ;.RBALC
EXP 0,0,0,0,0,0
;BLOCK USED TO DELETE AN FE.SYS WITH BAD BLOCKS IN IT
DELBLK: .RBPRV
EXP 0,0,0,0
SUBTTL STORAGE
HOMERR: BLOCK 1 ;NUMBER OF HOM BLOCKS THAT HAD ERRORS
FEFPOS: BLOCK 1
PDL: BLOCK PDSIZ
IIOWD: IOWD 200,IBUF
0
IBUF: BLOCK 200
OIOWD: IOWD 200,OBUF
0
OBUF: BLOCK 200
END FEFILE