Trailing-Edge
-
PDP-10 Archives
-
BB-FI82B-DD_1989
-
2,5/track.hlp
There are 6 other files named track.hlp in the archive. Click here to see a list.
TRACK.HLP %5(5)
TRACK is a program for monitoring the progress and performance
of individual jobs and the performance and utilization of an entire
system. It performs a peek at the object being tracked at intervals
set by the user (Defaults = 10 sec for indiv. specs, 60 seconds for
"USERS" command and 10 seconds for system data) and reports under
criteria set by the user via switches (default= every peek for jobs,
every 30 peeks for system)
COMMAND FORMAT:
OUTDEV:OUTFIL.EXT[PATH spec]=command/SWITCH/SWITCH...
If no file spec appears, the output device is TTY, if a file spec is
supplied, the missing parts (if any) default to DSK:TRACK.TXT[MYPATH]
or DSK:TRACK.TRC[MYPATH], depending on format used.
COMMANDS:
nn Track job number nn
#nn Track job on teletype nn
PPN[p,pn] Track any job with PPN p,pn. [,],[Proj,],[,Prog]
do the usual things, as do [*,Prog,[Proj,*],[*,*]
MYPPN Track any job with same PPN as this job
. Track your own job
'PROGRM' Track any job running program 'PROGRM'
USERS Track all the jobs on the system
at one minute intervals
SYSTEM Track system performance parameters
@Filespec Get commands from indirect file.
defaults are filled in
from DSK:TRACK.CCL[MYPATH]
ITEMS DISPLAYED WHEN TRACKING JOBS AND THEIR ASSOCIATED REFERENCE
NAMES ARE:
1. Time of day (DAY)
2. Job number (JOB)
3. Teletype number (If attached) (TTY)
4. Name of program being run (PROG)
5. Core usage in K or Pages (LOW,HIGH)
6. Whether job is in core or swapped (NSWP)
7. Runtime for the job (RT)
8. Status of job, by status bits and analysis (STAT)
9. Disk I/O in units of blocks (RD,WR)
10. Runtime statistics for the job (Shown only if /Statistics used)
These include :
1. Total Kilo-Core-Seconds used by the job (KCT)
2. Incremental runtime over incremental elapsed time
3. Time left in the cpu time limit timer (If one was set) (TLM)
11. Priv bits/JACCT on for this job ( only if /Privelege used and a
change in these bits occurs) (PRV,GOD)
12. User name and ppn (Shown only if /User in effect and a change
occurs) (NAM1,NAM2,PPN)
ITEMS DISPLAYED WHEN TRACKING SYSTEM STATISTICS:
NOTE: Most items are displayed as frequency distributions:
Low bound - Upper bound percent of values in this range
Following each list of distributions for a measured element is the
average and std. deviation for the overall distribution. The 4
letter codes listed in parenthesis after each item below is the label
used in the output reports in TRACE mode.
1. For each processor (n=cpu number)
1. Percent idle time (CPNI))
2. Percent lost time (CPNL)
3. Percent of time spent in overhead (CPNO)
4. Number of context switches per second (CPNC)
5. UUOs executed per second (CPNU)
6. Number of cache sweeps per second (KL) (LNSN)
7. percent of time spent in exec mode (KL) (EXEC,EXEN)
(SEE /meter, /nometer, & /meter? switches below)
8. number of mbox references (1000/SECOND) (KL) (MBXR,MBXN)
(SEE /meter, /nometer, & /meter? switches below)
9. cache sweep requests/sec by scheduler (LNLN)
10. cache sweep requests/sec actually swept for (LNRN)
11. percentage cache lost time (LNLT)
2. The number of pages of swapping space left (SWPS)
3. average wasted core (P) (WASK)
4. average PQ1/CMQ swap in response (TICKS) (CPSI)
5. cache sweep requests/second by swapper (L0SD)
6. swapper null time (SWPN)
7. swapper lost time (SWPL)
8. terminal response time (MS) (RESP)
9. The percent of Executive free core in use (PFCU)
10. The percent of TTY chunks in use (PTCU)
11. The number of SCNSER xmt interupts per second (SXMT)
12. The number of SCNSER rcv interupts per second (SRCV)
13. Number of disk blocks read and written for users (UDIO)
14. Number of disk blocks swapped per second (SWIO)
15. Number of KCS accumulated by the system each second (UKCS)
16. Avg. time to TTY output response in ms. (AVRT)
17. Number of jobs logged in (JLNG)
18. Percent of physical user core in use by active jobs (ACCR)
19. Percent of physical core in use by all jobs (PHCR)
20. Average job size (To nearest K or Page) (AVJS)
21. Number of jobs in the run queues (NRJR)
22. Percent of runnable jobs in core (PRJC)
23. Number of jobs in TTY IO wait queues (TIOW)
24. Number of jobs in IO wait queues other than TTY (IOW)
25. Number of jobs in the shareable resource queues (JSHQ)
26. For each disk,the length of the position wait queue (DISK)
27. For each data channel, length of transfer wait queue (CHAN)
NOTE
DISK and CHANNEL statistics are not normally shown, and
must be "/INCLUDE"d if you want them.
28. GENERAL SCHEDULER INFORMATION
1. DTA generated sleeps (SDGS)
2. MTA generated sleeps (SMGS)
3. Count of event wait satisfied (SWES)
4. Count of tty input wait satisfied (STIS)
5. Count of tty output wait satisfied (STOS)
6. Count of pty input wait satisfied (SPIS)
7. Count of pty output wait satisfied (SPOS)
8. Count of sleep state requeue to PQ1 (SRS1)
9. Count of wake requeue to PQ1 (SRW1)
10. Count of daemon satisfied requeue to PQ1 (SRD1)
11. Count of all other requeues to PQ1 (SRO1)
12. Count of PQ1 jobs expiring quantum (SQR1)
13. Count of PQ2 jobs expiring quantum (SQR2)
14. Count of HPQ jobs expiring quantum (SQRH)
15. Count of PQ1 jobs expiring icpt (SIP1)
16. Count of PQ2 jobs expiring icpt (SIP2)
17. Count of HPQ jobs expiring icpt (SIPH)
18. Amount of PQ1 swap in memory (K) (SKS1)
19. Amount of PQ2 swap in memory (K) (SKS2)
20. Amount of HPQ swap in memory (K) (SKSH)
21. Count of PQ1 jobs swapped in (SNJ1)
22. Count of PQ2 jobs swapped in (SNJ2)
23. Count of HPQ jobs swapped in (SNJH)
24. Unwind count (UNWD)
25. Swapper force count (SWPF)
GENERAL SWITCHES:
/Interval:n Change the inter-peek interval to the value of n (SECS)
/Help Type the help text
/Help:switches Type out list of TRACK's switches
/Help:keywords Type out keywords of /Compare & /Include/Exclude
/List Overide output device, make it LPT:
/Pause Return to monitor level just before beginning
track, so user can give "CCONT", "DETACH" sequence.
/Exit:n Exit after n peeks, or immediatley if no command
yet given
/X:n Same as Exit (NOTE: argument is optional)
/Save:n Every n printouts, save and reopen the output file
/Save Equivalent to /Save:1
/HPQ:N PUT TRACK IN HPQ N WHEN TRACKING. IF N IS OMMITTED,
THE JOBS HIGHEST HPQ IS USED
/LOCK LOCK JOB IN CORE WHILE TRACKING
/MESSAGE:MMM ONE OF "NOPREFIX", "NOFIRST", OR "CONTINUATION"
/FORMAT: MMM CHANGE THE FORMAT OF REPORTS GIVEN.
"TEXT" (DEFAULT) MEANS REPORT IN ASCII TEXT.
"TRACE" MEANS REPORT IN SPECIAL BLOCK FORMAT
BINARY FILE, SUITABLE FOR MACHINE READING.
SEE THE FILE TRACK.MAC FOR A DESCRIPTION
OF THIS FORMAT.
ALSO CHANGES DEFAULT FILE NAME TO TRACK.TRC
SWITCHES USED IN JOB TRACKING:
/Compare:arg,arg Display job data only when there is a
change in the named field. The arguments are the
names for each displayed item. If no args are given,
the default of JOB,TTY,PROG,PRV,PPN,NAM1,NAM2
IS USED
/INCREMENTAL DISPLAY RUNTIME AND DISK I/O INCREMENTALLY
/USER DISPLAY USER NAME AND PPN WHEN THERE IS A CHANGE
/PRIVELEGE DISPLAY PRIVILEGE BITS AND JACCT WHEN THERE IS CHANGE
/STATISTICS DISPLAY USER RUNTIME STATISTICS
/NOKILL DO NOT GIVE FATAL ERROR IF TRACKED JOB NOT FOUND
INSTEAD, KEEP LOOKING FOR JOB.
SWITCHES USED IN SYSTEM TRACKING:
/Group:n Change the number of intervals per report from 30 to
to the value of n
/Summary Give only average and std. deviation for output
I.E. Deletes frequency distribution
/Exclude:arg,arg The args are the four letter codes for each
item in the system report or "ALL". The items are
not tracked for the system report. Exclude and Include
are immediate action switches, so the sequence:
SYSTEM/EXCLUDE:ALL/INCLUDE:JLGN
tracks only the number of jobs logged in.
/Include:arg,arg The args are the four letter codes for each
system tracked item or "ALL" This
switch is used to tailor the system report after an
/Exclude:ALL is done.
/Disk: mmm Controls the disk statistics:
"ALL" gives position wait queue length for all disks
"SYSTEM" gives only those in system search list
NOTE: if the argument is omitted "ALL" is assummed
/Daily: When using /FORMAT:TRACE, causes the output file to
be renamed at midnight to a filename of MMDDYY
/Meter Causes TRACK to use the KL10 performance meter
board for collecting EBOX and MBOX statistics,
for all processors in the configuration.
/Nometer Causes TRACK to not use the KL10 meter board
for any of the processors in the configuration
/Meter0 Causes TRACK to use the KL10 meter board on CPU0
/Meter1 Causes TRACK to use the KL10 meter board on CPU1
/Meter2 Causes TRACK to use the KL10 meter board on CPU2
/Meter3 Causes TRACK to use the KL10 meter board on CPU3
/Meter4 Causes TRACK to use the KL10 meter board on CPU4
/Meter5 Causes TRACK to use the KL10 meter board on CPU5
DURING EXECUTION THE USER MAY ISSUE ANY OF THE FOLLOWING ONE LETTER
COMMANDS:
X Close output and exit the program
F Force a printout to TTY immediately
N Close output and go back to command level
W Give short typeout on TRACK's status
U Output the user name and PPN
P Output privilege bits that are lit
S Output the job statistics line
H Type the help text
NOTE
If the tracking interval is small, figures may be inaccurate
on a loaded system, unless TRACK is run locked and/or in an
HPQ.
[End of TRACK.HLP]