Trailing-Edge
-
PDP-10 Archives
-
BB-H138A-BM
-
3a-sources/setspd.mac
There are 33 other files named setspd.mac in the archive. Click here to see a list.
;<3A.UTILITIES>SETSPD.MAC.21, 4-Aug-78 13:13:02, Edit by MCLEAN
;<3A.UTILITIES>SETSPD.MAC.20, 4-Aug-78 13:11:23, Edit by MCLEAN
;<3A.UTILITIES>SETSPD.MAC.19, 3-Aug-78 17:12:20, Edit by MCLEAN
;<3A.UTILITIES>SETSPD.MAC.18, 28-Jul-78 15:33:15, Edit by MCLEAN
;<3A.UTILITIES>SETSPD.MAC.17, 27-Jul-78 14:41:21, EDIT BY MILLER
;INCREMENT EDIT NUMBER
;<3A.UTILITIES>SETSPD.MAC.16, 26-Jul-78 15:00:29, Edit by MCLEAN
;<3A.UTILITIES>SETSPD.MAC.15, 16-May-78 09:21:33, EDIT BY MILLER
;<3A.UTILITIES>SETSPD.MAC.14, 16-May-78 09:19:58, EDIT BY MILLER
;<3A.UTILITIES>SETSPD.MAC.13, 16-May-78 09:17:32, EDIT BY MILLER
;AND CHANGE VERSION TO 3A
;<3A.UTILITIES>SETSPD.MAC.12, 16-May-78 09:16:35, EDIT BY MILLER
;ADD MINOR VERSION TO CONFIG NAME
;<1MCLEAN>SETSPD.MAC.17, 4-May-78 18:31:02, Edit by MCLEAN
;<1MCLEAN>SETSPD.MAC.16, 4-May-78 18:24:33, Edit by MCLEAN
;<1MCLEAN>SETSPD.MAC.15, 4-May-78 17:37:31, Edit by MCLEAN
;<1MCLEAN>SETSPD.MAC.14, 4-May-78 17:22:55, Edit by MCLEAN
;<1MCLEAN>SETSPD.MAC.13, 4-May-78 17:22:03, Edit by MCLEAN
;<1MCLEAN>SETSPD.MAC.12, 4-May-78 16:22:12, Edit by MCLEAN
;<1MCLEAN>SETSPD.MAC.11, 4-May-78 16:16:56, Edit by MCLEAN
;TCO 1880 ADD SLAVE TYPES TO MTALN JSYS
;<3A.UTILITIES>SETSPD.MAC.10, 7-Apr-78 00:41:18, Edit by MCLEAN
;<3A.UTILITIES>SETSPD.MAC.9, 7-Apr-78 00:15:05, Edit by MCLEAN
;<3A.UTILITIES>SETSPD.MAC.8, 7-Apr-78 00:13:21, Edit by MCLEAN
;<3A.UTILITIES>SETSPD.MAC.7, 7-Apr-78 00:07:24, Edit by MCLEAN
;ADD HSB (HALT STATUS BLOCK) FOR KS10
;<3A.UTILITIES>SETSPD.MAC.6, 28-Feb-78 15:45:42, EDIT BY MILLER
;FIX NODNAM TO CHECK FOR EOL
;<3A.UTILITIES>SETSPD.MAC.5, 24-Feb-78 09:54:01, EDIT BY MILLER
;<3A.UTILITIES>SETSPD.MAC.4, 24-Feb-78 09:45:50, EDIT BY MILLER
;<3A.UTILITIES>SETSPD.MAC.3, 24-Feb-78 09:45:11, EDIT BY MILLER
;ADD NODE NUMBER TO NODE COMMAND
;<4.UTILITIES>SETSPD.MAC.2, 16-Dec-77 14:01:29, EDIT BY MILLER
;<4.UTILITIES>SETSPD.MAC.1, 16-Dec-77 13:56:02, EDIT BY MILLER
;TCO 1879. ADD NODE COMMAND
;<3-UTILITIES>SETSPD.MAC.16, 8-Nov-77 10:51:06, EDIT BY KIRSCHEN
;MORE COPYRIGHT UPDATING...
;<3-UTILITIES>SETSPD.MAC.15, 3-Nov-77 09:07:50, EDIT BY KIRSCHEN
;RECOVER IF BOUT TO ALIGN LPT FORMS FAILS
;<3-UTILITIES>SETSPD.MAC.14, 26-Oct-77 11:48:16, EDIT BY KIRSCHEN
;UPDATE COPYRIGHT FOR RELEASE 3
;<3-UTILITIES>SETSPD.MAC.13, 12-Oct-77 18:57:55, EDIT BY HURLEY
;ADDED THE COMMANDS TO ENABLE/DISABLE FULL LATENCY OPTIMIZATION
;<3-UTILITIES>SETSPD.MAC.12, 16-Aug-77 16:17:50, EDIT BY HURLEY
;<3-UTILITIES>SETSPD.MAC.11, 16-Aug-77 11:17:22, EDIT BY HURLEY
;ADD THE TERMINAL AUTO COMMAND
;<3-UTILITIES>SETSPD.MAC.10, 11-Aug-77 17:05:15, EDIT BY HURLEY
;MAKE SETSPD LOOKUP X-CONFIG WHERE X IS THE RELEASE NUMBER
;<3-UTILITIES>SETSPD.MAC.9, 11-Aug-77 09:21:45, EDIT BY HURLEY
;MAKE SETSPD LOOK ON SYSTEM: FOR CONFIG.CMD
;<3-UTILITIES>SETSPD.MAC.8, 3-Aug-77 00:05:43, EDIT BY CROSSLAND
;RESTORE HOST COMMAND
;<3-UTILITIES>SETSPD.MAC.7, 27-Jul-77 11:55:15, EDIT BY HURLEY
;<3-UTILITIES>SETSPD.MAC.6, 26-Jun-77 12:41:01, EDIT BY MILLER
;UNMAP DUMP PAGES AFTER ERROR
;<3-UTILITIES>SETSPD.MAC.5, 23-Jun-77 13:20:46, Edit by MACK
;TCO 1822 - DISABLE/ENABLE ACCOUNT VALIDATION
;<3-UTILITIES>SETSPD.MAC.4, 23-Jun-77 12:27:01, EDIT BY MILLER
;TCO 1686 AGGAIN. ADD ERJMP'S
;<3-UTILITIES>SETSPD.MAC.3, 23-Jun-77 11:35:38, EDIT BY KIRSCHEN
;TCO 1716 - ADD ENABLE/DISABLE DIRECTORY-PARAMETER-SETTING COMMANDS
; ALSO REMOVE STRUCTURE COMMAND, NO LONGER APPLICABLE
;<3-UTILITIES>SETSPD.MAC.2, 25-May-77 13:53:35, EDIT BY KIRSCHEN
;TCO 1807 - ADD NOBELL OPTION TO THE TERMINAL COMMAND (SEE ALSO TCO 1802)
;<3-UTILITIES>SETSPD.MAC.1, 17-Jan-77 11:55:09, Edit by LCAMPBELL
;TCO 1714 - Fix LODANY to type error message if LPINI fails.
;<2-UTILITIES>SETSPD.MAC.14, 27-Dec-76 17:07:56, EDIT BY HURLEY
;<2-UTILITIES>SETSPD.MAC.13, 22-Dec-76 13:42:19, EDIT BY HURLEY
;<2-UTILITIES>SETSPD.MAC.12, 22-Dec-76 10:17:55, EDIT BY KIRSCHEN
;<2-UTILITIES>SETSPD.MAC.11, 20-Dec-76 12:19:25, EDIT BY KIRSCHEN
;TCO 1686 - MAKE SETSPD COPY DUMPS GREATER THAN 256 K
;<2-UTILITIES>SETSPD.MAC.10, 23-Nov-76 10:31:18, Edit by MACK
;<2-UTILITIES>SETSPD.MAC.9, 19-Nov-76 09:33:17, Edit by MACK
;TCO 1666 - MORE TIMEZONE EDITS
;<2-UTILITIES>SETSPD.MAC.8, 18-Nov-76 20:26:22, EDIT BY MILLER
;DISABLE CACHE REFILL CODE
;<2-UTILITIES>SETSPD.MAC.7, 16-Nov-76 11:32:27, Edit by MACK
;TCO 1666 - ADDED FUNCTIONS TO SET TIME ZONE AND ARPANET SITE ADDRESS
;<2-UTILITIES>SETSPD.MAC.4, 4-Nov-76 15:08:10, EDIT BY HURLEY
;TCO 1604- ADD CODE TO RESET TTY NO MSG BITS IN F.E.
;<2-UTILITIES>SETSPD.MAC.3, 25-Oct-76 17:27:57, EDIT BY HURLEY
;TAKE OUT CALL TO QUEBLK DURING NORMAL RUNNING OF SETSPD
;<2-UTILITIES>SETSPD.MAC.2, 21-Oct-76 14:56:33, Edit by MACK
;TCO 1615 - ADD ALTERNATE SETSPD ENTRY, START1:
;<2-UTILITIES>SETSPD.MAC.1, 2-Aug-76 14:12:05, EDIT BY KIRSCHEN
;TCO 1468 - ADD STRUCTURE COMMAND
;<1B-UTILITIES>SETSPD.MAC.8, 9-Jul-76 09:40:18, EDIT BY HURLEY
;INCREASED VERSION NUMBER FOR RELEASE 1B
;<1B-UTILITIES>SETSPD.MAC.7, 23-Jun-76 18:33:29, EDIT BY HURLEY
;<1B-UTILITIES>SETSPD.MAC.6, 16-Jun-76 16:26:47, EDIT BY MILLER
;TCO 1437. ADD SETSPD: TO ALL ERROR MESSAGES
;<1B-UTILITIES>SETSPD.MAC.5, 16-Jun-76 16:20:16, EDIT BY MILLER
;<1B-UTILITIES>SETSPD.MAC.4, 16-Jun-76 16:17:15, EDIT BY MILLER
;TCO 1435. IMPROVE ERROR MESSAGE FROM BAD DEFINE COMMAND
;<1B-UTILITIES>SETSPD.MAC.3, 16-Jun-76 16:04:45, EDIT BY MILLER
;TCO 1433. IMPROVE ERROR MESSAGE FOR RAM OR VFU LOAD ERROR
;<1B-UTILITIES>SETSPD.MAC.2, 23-MAY-76 10:58:55, EDIT BY HALL
;<1B-UTILITIES>SETSPD.MAC.1, 22-MAY-76 11:40:05, EDIT BY MILLER
;<1A-UTILITIES>SETSPD.MAC.69, 6-MAY-76 11:03:02, EDIT BY HURLEY
;<1A-UTILITIES>SETSPD.MAC.68, 6-MAY-76 10:45:25, EDIT BY HURLEY
;<1A-UTILITIES>SETSPD.MAC.65, 12-APR-76 10:46:11, EDIT BY MILLER
;TCO 1167 AGAIN. FIX OFF-LINE INTERRUPT
;<1A-UTILITIES>SETSPD.MAC.64, 8-APR-76 11:51:17, EDIT BY HURLEY
;TCO 1244 - ADD .DIRECT .XTABM FOR MACRO 50 ASSEMBLIES
;<1A-UTILITIES>SETSPD.MAC.63, 1-APR-76 18:37:26, EDIT BY HURLEY
;TCO # 1205 - SET PROTECTION OF <SYSTEM>DUMP.EXE TO 770000
;<1A-UTILITIES>SETSPD.MAC.62, 31-MAR-76 09:43:47, EDIT BY HURLEY
;TCO # 1227 - ADD TOPS-20 ENTRY VECTOR AND VERSION NUMBER
;<V-SOURCES>SETSPD.MAC.61, 27-MAR-76 12:22:23, EDIT BY MILLER
;<V-SOURCES>SETSPD.MAC.60, 27-MAR-76 12:02:14, EDIT BY MILLER
;<V-SOURCES>SETSPD.MAC.59, 27-MAR-76 12:01:37, EDIT BY MILLER
;<V-SOURCES>SETSPD.MAC.58, 27-MAR-76 09:07:22, EDIT BY MILLER
;<V-SOURCES>SETSPD.MAC.57, 27-MAR-76 09:05:33, EDIT BY MILLER
;<V-SOURCES>SETSPD.MAC.56, 23-MAR-76 15:05:31, EDIT BY HURLEY
;TCO 1205 - MAKE PROTECTION OF DUMP.EXE BE 770000
;<V-SOURCES>SETSPD.MAC.55, 16-MAR-76 14:51:06, EDIT BY MILLER
;<V-SOURCES>SETSPD.MAC.54, 15-MAR-76 14:12:49, EDIT BY MILLER
;TCO 1015. FIX UP CHFDB
;<V-SOURCES>SETSPD.MAC.53, 15-MAR-76 09:45:25, EDIT BY KIRSCHEN
;<V-SOURCES>SETSPD.MAC.52, 12-MAR-76 10:21:14, EDIT BY MILLER
;<V-SOURCES>SETSPD.MAC.51, 12-MAR-76 10:13:48, EDIT BY MILLER
;<V-SOURCES>SETSPD.MAC.50, 12-MAR-76 09:30:06, EDIT BY MILLER
;<V-SOURCES>SETSPD.MAC.49, 11-MAR-76 19:29:33, EDIT BY MILLER
;<V-SOURCES>SETSPD.MAC.48, 11-MAR-76 19:26:43, EDIT BY MILLER
;<V-SOURCES>SETSPD.MAC.47, 11-MAR-76 19:25:48, EDIT BY MILLER
;<V-SOURCES>SETSPD.MAC.46, 11-MAR-76 19:20:29, EDIT BY MILLER
;<V-SOURCES>SETSPD.MAC.45, 11-MAR-76 19:16:49, EDIT BY MILLER
;<V-SOURCES>SETSPD.MAC.44, 11-MAR-76 19:09:30, EDIT BY MILLER
;<V-SOURCES>SETSPD.MAC.43, 11-MAR-76 12:37:59, EDIT BY KIRSCHEN
;<V-SOURCES>SETSPD.MAC.42, 11-MAR-76 09:22:07, EDIT BY KIRSCHEN
;<V-SOURCES>SETSPD.MAC.41, 10-MAR-76 21:35:51, EDIT BY KIRSCHEN
;<V-SOURCES>SETSPD.MAC.40, 9-MAR-76 13:24:00, EDIT BY KIRSCHEN
;<V-SOURCES>SETSPD.MAC.39, 9-MAR-76 13:23:16, EDIT BY KIRSCHEN
;TCO 1169 - CREATE DUMP.CPY FILES WITH PROTECTION 770000.
;<V-SOURCES>SETSPD.MAC.38, 9-MAR-76 09:53:58, EDIT BY KIRSCHEN
;TCO 1167 - ADD "PRINTER" COMMANDS TO INITIALIZE PRINTERS
;<V-SOURCES>SETSPD.MAC.37, 9-FEB-76 15:35:59, EDIT BY MILLER
;<V-SOURCES>SETSPD.MAC.37, 9-FEB-76 15:00:02, EDIT BY MILLER
;MCO 1066. LOAD CACHE REFILL ALGORITHM
;<V-SOURCES>SETSPD.MAC.36, 6-FEB-76 14:16:17, EDIT BY MILLER
;MORE EDITS FOR MCO 15
;<V-SOURCES>SETSPD.MAC.35, 21-JAN-76 12:13:58, EDIT BY MILLER
;MCO # 15. SET RETENTION COUNT OF DUMP.CPY AND CHECK DBUGSW
;<V-SOURCES>SETSPD.MAC.34, 12-JAN-76 10:25:44, EDIT BY MILLER
TITLE SETSPD
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY ONLY BE USED
; OR COPIED IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
;COPYRIGHT (C) 1976, 1977, 1978 BY DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
SEARCH MONSYM,MACSYM,SERCOD
.REQUIRE SYS:MACREL,SERCOD
SALL
IFNDEF .PSECT,<
.DIRECT .XTABM>
; VERSION NUMBER DEFINITIONS
VMAJOR==3 ;MAJOR VERSION OF SETSPD
VMINOR==1 ;MINOR VERSION NUMBER
VEDIT==7 ;EDIT NUMBER
VWHO==0 ;GROUP WHO LAST EDITED PROGRAM (0=DEC DEVELOPMENT)
VSTSPD== <VWHO>B2+<VMAJOR>B11+<VMINOR>B17+VEDIT
;THIS ROUTINE IS RUN BY THE MONITOR AT SYSTEM START UP AND SETS
;VARIOUS PARAMETERS ABOUT THE SYSTEM. PRESENTLY IT WILL SET:
; 1. LINE SPEEDS AND REMOTE CHARACTERSITICS
;
; 2. SYSTEM LOGICAL NAMES
;
; 3. READ THE PREVIOUS DUMP AND QUEUE UP ANY SYSERR BLOCKS
; THAT DID NOT GET QUEUED UP BEFORE THE CRASH
;
; 4. SET MAGTAPE LOGICAL TO PHYSICAL CORRESPONDENCE
;
; 5. LOAD RAM AND VFU FILES FOR LINEPRINTERS
;
; 6. ENABLE DIRECTORY-PARAMETER-SETTING
;
; 7. SET LOCAL TIME ZONE
;
; 8. SET THIS SITE'S ARPANET ADDRESS
;
; 9. ENABLE ACCOUNT-VALIDATION
;LOCAL STORAGE
MTBLK: 3 ;SIZE OF BLOCK
BLOCK 2 ;FOR OTHER ARGS
EOLF: BLOCK 1
PDL: BLOCK 20 ;THE PDL
FILNAM: BLOCK ^D28 ;NAME OF RAM OR VFU FILE PUT HERE
LINES: BLOCK 1 ;WORD TO HOLD LINES
STRBLK: BLOCK .MSSLN ;BLOCK FOR STRUCTURE COMMAND
HSBBUF: BLOCK HS%LEN ;LENGTH OF HSB AND HEADER
SPDTBL==10000 ;SPEED TABLE
REMTBL==20000 ;REMOTE TABLE
CPYPGS==^D10 ;# OF PAGES TO COPY WITH EACH PMAP
CPYWDS==CPYPGS_PGSFT ;NUMBER OF WORDS TO COPY
PGSFT==11 ;PAGE SHIFT VALUE
PG0PG==30 ;PAGE 0 OF DUMP.EXE
PG0ADR=PG0PG_PGSFT
TMPPG==31 ;2 PAGES FOR TEMPORARY MAPPING
TMPADR=TMPPG_PGSFT
DMPPG==40 ;PAGE FOR MAPPING DUMP FILE
DMPADR==DMPPG_PGSFT
CPYPG==DMPPG+CPYPGS ;PAGE FOR MAPPING COPY FILE
CPYADR==CPYPG_PGSFT
;THE TEXTI ARG BLOCK
TEXT: 4
FLAGS: RD%JFN!RD%PUN ;FLAGS
JFN: 0,,377777 ;JFN'S
BUFPTR: -1,,BUFFER ;BUFFER POINTER
COUNT: SIZE ;SIZE OF BUFFER
SIZE==100
SIZEB==SIZE*5 ;# OF BYTES IN BUFFER
BUFFER: BLOCK SIZE ;WORK BUFFER
RELOC 1000-140 ;ALL THE REST IS PURE
;PROGRAM ENTRY VECTOR
ENTVEC: JRST START ;STARTING LOCATION
JRST START ;REENTER LOCATION
VSTSPD ;VERSION NUMBER
JRST START1 ;ALTERNATE STARTING LOCATION
ENVLEN==.-ENTVEC ;ENTRY VECTOR LENGTH
;COMMAND TABLES:
;****************************************************************
;
; WARNING!!!
;
; THESE TABLES MUST BE KEPT IN ALPHABETICAL ORDER FOR TBLUK
;
;****************************************************************
LEV1TB: ELEVL1-.-1,,ELEVL1-.-1
XWD [ASCIZ /DEFINE/],DEFINE
XWD [ASCIZ /DISABLE/],DISABL
XWD [ASCIZ /ENABLE/],ENABLE
XWD [ASCIZ /HOST/],HOST
XWD [ASCIZ /MAGTAPE/],MAGTAP
XWD [ASCIZ /NODE/],NODNAM
XWD [ASCIZ /PRINTER/],LPTLOD
XWD [ASCIZ /TERMINAL/],TERM
XWD [ASCIZ /TIMEZONE/],TIMZON
ELEVL1:
;TABLE FOR TERMINAL CHARACTERISTICS
LEV2TB: ELEVL2-.-1,,ELEVL2-.-1
XWD [ASCIZ /AUTO-BAUD/],AUTO
XWD [ASCIZ /NOBELL/],NOBELL
XWD [ASCIZ /REMOTE/],REMOTE
XWD [ASCIZ /SPEED/],SPEED
ELEVL2:
; TABLE OF OPTIONS FOR ENABLE COMMANDS
ENAOPT: ENASIZ-1,,ENASIZ-1
XWD [ASCIZ/ACCOUNT-VALIDATION/], ENACCT
XWD [ASCIZ/DIRECTORY-PARAMETER-SETTING/], ENADIR
XWD [ASCIZ/FULL-LATENCY-OPTIMIZATION/], ENAFLO
ENASIZ==.-ENAOPT
; TABLE OF OPTIONS FOR DISBLE COMMANDS
DISOPT: DISSIZ-1,,DISSIZ-1
XWD [ASCIZ/ACCOUNT-VALIDATION/], DISACT
XWD [ASCIZ/DIRECTORY-PARAMETER-SETTING/], DISDIR
XWD [ASCIZ/FULL-LATENCY-OPTIMIZATION/], DISFLO
DISSIZ==.-DISOPT
; TABLE OF OPTIONS FOR LOADING PRINTERS
LPTTAB: LPTBSZ-1,,LPTBSZ-1
XWD [ASCIZ /LOWERCASE/], .MOSTS
XWD [ASCIZ /RAM/], .MOLTR
XWD [ASCIZ /VFU/], .MOLVF
LPTBSZ==.-LPTTAB
SLAVT: SLVBSZ-1,,SLVBSZ-1
XWD [ASCIZ /TU45/],.MTT45 ;TU45
XWD [ASCIZ /TU70/],.MTT70 ;TU70
XWD [ASCIZ /TU71/],.MTT71
XWD [ASCIZ /TU72/],.MTT72 ;TU72
SLVBSZ==.-SLAVT
;DEFINE REGISTERS USED
A==1
B==2
C==3
D==4
T1=1
T2=2
T3=3
T4=4
Q1==5
Q2==6
Q3==7
P1==10
P2==11
P3==12
P4==13
P5==14
P==17
;USEFUL DEFINITIONS
OPDEF CALL [PUSHJ P,]
OPDEF RET [POPJ P,]
DEFSTR SEBSIZ,0,17,12 ;POINTER TO SIZE FIELD IN SYSERR BLOCK
DEFSTR SEBERC,HSBBUF,8,9 ;POINTER TO ERROR BLOCK IN SYSERR BLOCK
SEBQOU=24 ;ADDRESS OF POINTER TO SYSERR QUEUE
SEBHED==2 ;NUMBER OF HEADER WORDS IN SYSERR BLOCK
;DEFINE INTERRUPT SYSTEM TABLES
ADDR: BLOCK 1
LEVTAB: ADDR
CHNTAB: 1,,LPTINT
DEFINE BCONFIG (R) <
IFE VMINOR,<ASCIZ /SYSTEM:'R'-CONFIG.CMD/>
IFG VMINOR,<
DEFINE BSP (R1,LETT) <
IRPC LETT,<
IFE "A"-"'LETT'"+VMINOR-1,<
ASCIZ /SYSTEM:'R1'LETT'-CONFIG.CMD/
STOPI>
>
>
BSP (\VMAJOR,"ABCDEFGHIJKLMNOPQRSTUVWXYZ")>
>
RCONFG: BCONFIG (\VMAJOR)
;THE CODE
START: RESET ;GET TO A KNOWN STATE
MOVEI A,.FHSLF ;GET OWN ID
RPCAP ;READ CAPABILITES
MOVE C,B ;ENABLE ALL CAPABILITIES
EPCAP ;DO IT
MOVE P,[IOWD 20,PDL] ;SET UP PUSH DOWN LIST
MOVE B,[LEVTAB,,CHNTAB] ;DEFINE INT SYSTEM
SIR
MOVSI B,(1B0) ;ENABLE LPT CHANNEL
AIC
EIR ;TURN ON INTS
;NOW FIND THE COMMAND FILE
MOVX A,GJ%SHT!GJ%OLD!GJ%PHY
HRROI B,RCONFG ;SYSTEM:X-CONFIG.CMD
GTJFN ;FIND THE FILE
JRST FINISH ;NOT THERE. GO DEFAULT EVERYTHING
HRLM A,JFN ;STASH THE JFN IN THE TEXTI BLOCK
MOVE B,[070000,,200000] ;READ ONLY
OPENF ;GET IT
JRST [ MOVEI A,.PRIOU ;THE CTY NO DOUBT
HRLOI B,.FHSLF ;THIS FORK
SETZ C, ;NO FLAGS
ERSTR ;OUTPUT SOMETHING
JFCL
JFCL
JRST FINISH] ;AND GO DEFAULT EVERYTHING
;FOUND THE FILE. NOW PROCESS THE COMMANDS
CMND: CALL PBLANK ;SKIP BLANKS
JRST .-1 ;NULL LINE
CAIE B,";" ;A COMMENT?
CAIN B,"!" ;OR THIS TYPE
JRST PURGE ;YES. SKIP ALL OF THE LINE
MOVEI A,LEV1TB ;THE TABLE
JRST GTKEY ;GO FIND AND DISPATCH ON KEY
;ALTERNATE SETSPD ENTRY
START1: RESET ;GET TO A KNOWN STATE
MOVEI A,.FHSLF ;GET OWN ID
RPCAP ;READ CAPABILITIES
MOVE C,B ;ENABLE ALL CAPABILITIES
EPCAP ;DO IT
MOVE P,[IOWD 20,PDL] ;SET UP PUSH DOWN LIST
MOVE B,[LEVTAB,,CHNTAB] ;DEFINE INT SYSTEM
SIR
MOVSI B,(1B0) ;ENABLE LPT CHANNEL
AIC
EIR ;TURN ON INTERRUPTS
CALL QUEBLK
HALTF
;ROUTINE TO PURGE INVALID COMMAND
PURGE1: HLRZ A,JFN
BKJFN ;GO BACK ONE
JFCL
PURGE: MOVX A,RD%BEL!RD%JFN ;FIND END OF COMMAND
MOVEM A,FLAGS
HRROI A,BUFFER ;WHERE TO PUT IT
MOVEM A,BUFPTR
MOVEI A,SIZEB ;SIZE OF BUFFER
MOVEM A,COUNT ;TO THE ARG BLOCK
MOVEI A,TEXT ;ARG BLOCK
TEXTI ;PURGE THE COMMAND
JRST FINISH ;FILE SCREWED UP. GO FINISH UP
MOVX A,RD%BTM ;CHECK FOR TERMINATOR FOUND
TDNE A,FLAGS ;DID WE
JRST CMND ;YES. GO TO NEXT COMMAND
CALL SEEEOF ;SEE IF AT EOF
JRST PURGE ;NOT .CONTINUE PURGING
JRST FINISH ;YES. ALL DONE
SEEEOF: HLRZ A,JFN ;SEE IF AT EOF
GTSTS ;GET STATUS
TXNE B,GS%EOF ;AT EOF?
AOS 0(P) ;YES
RET ;RETURN
;ROUTINE TO SKIP BLANKS AND TABS
;WILL RETURN TERMINATING BYTE IN B
PBLANK: HLRZ A,JFN
BIN ;GET NEXT BYTE
CAIN B,.CHLFD ;A LINE FEED?
RET ;YES. TELL HIM EOL
JUMPE B,[ CALL SEEEOF ;SEE IF EOF
JRST .+1 ;NO
JRST FINISH] ;YES. BAD FILE
CAIE B," " ;A BLANK
CAIN B," " ;OR A TAB?
JRST PBLANK ;YES. SKIP IT
CAIN B,15 ;A CR?
JRST PBLANK ;YES. SKIP IT
BKJFN
JFCL
AOS (P) ;SKIP
RET ;AND DONE
;CODE TO FIND THE NEXT KEY WORD IN THE COMMAND FILE AND DISPATCH
;TO THE ACTION ROUTINE. INPUT IS:
; A/ ADDRESS OF TABLE
GTKEY: PUSH P,A ;SAVE ARG
MOVEI A,SIZEB ;SIZE OF BUFFER
MOVEM A,COUNT ;TO ARG BLOCK
HRROI A,BUFFER ;WHERE DATA IS GOING
MOVEM A,BUFPTR
MOVX A,RD%JFN!RD%PUN!RD%BEL ;FLAGS
MOVEM A,FLAGS ;TO THE ARGS
MOVEI A,TEXT ;ARG BLOCK
TEXTI ;READ KEY VALUE
JRST FINISH ;FILE IS SCREWED UP. GO FINISH
MOVX A,RD%BTM ;SEE IF FOUND TERMIANTOR
TDNN A,FLAGS ;DID WE?
JRST [ CALL SEEEOF ;NO. AT EOF?
JRST PURGE ;NO. SKIP REST OF LINE
JRST FINISH] ;YES. DONE
LDB A,BUFPTR ;GET TERMINATOR
SETZM EOLF ;NOT AN EOL
CAIN A,.CHLFD ;WAS IT A LINE FEED?
SETOM EOLF ;YES. REMEMBER THIS
;FOUND KEY WORD. DO DISPATCH
SETZ B,
DPB B,BUFPTR ;TIE OFF STRING
SKIPE EOLF ;AT END OF LINE?
JRST [ MOVE A,BUFPTR ;YES
BKJFN ;BACK UP BYTE POINTER
JFCL
LDB C,A
CAIN C,15 ;A CR?
DPB B,A ;YES. ZAP IT TOO
JRST .+1]
POP P,A ;TABLE
HRROI B,BUFFER ;THE KEY WORD
TBLUK ;LOOK UP THE ENTRY
TXNN B,TL%ABR!TL%EXM ;GOT A GOOD MATCH?
JRST [ SKIPE EOLF ;NO. FOUND EOL YET?
JRST CMND ;SKIP IT
JRST PURGE] ;GO PURGE
HRRZ A,0(A) ;GET DISPACTH ADDRESS
JRST 0(A) ;GO TO IT
;COMMAND LEVEL ACTION ROUTINES.
;FIRST TERMINAL
TERM: SKIPE EOLF ;HAVE MORE ARGS?
JRST CMND ;NO. IGNORE LINE
CALL PBLANK ;SKIP BLANKS
JRST CMND ;FORGET IT
;NOW READ OUT THE LINE NUMBERS
HLRZ A,JFN ;GET JFN
MOVEI C,10 ;READ NUMNER IN OCTAL
NIN ;GET THE NUMBER
JRST PURGE1 ;PURGE LINE
HRLZM B,LINES ;SAVE FIST LINE NUMBER
BKJFN ;READ OUT TERMINATOR AGAIN
JFCL
BIN ;GET IT
CAIN B,"-" ;SPECIFYING A RANGE?
JRST GTRNGE ;YES. GET RANGE
HLRS LINES ;EXTEND LINE NUMBER
JRST LINKEY ;GO GET THE KEY
GTRNGE: NIN ;GET SECOND PART
JRST PURGE1 ;PURGE BAD COMMAND
HRRM B,LINES ;STASH LAST LINE NUMBER
; ..
;NOW READ OUT THE KEY WORD
LINKEY: HLRZ A,JFN
BKJFN ;GET TERMINATOR
JFCL
BIN ;""
CAIN B,.CHLFD ;A LINE FEED?
JRST LNKEY1 ;YES. END OF THIS ONE
LNKEY: CALL PBLANK ;SKIP BLANKS
JRST LNKEY1 ;NO KEY WORDS
SETZB P1,P2 ;ASSUME IS REMOTE
MOVEI A,LEV2TB ;KEY WORD
JRST GTKEY ;GET KEY WORD
LNKEY1: SETZB P1,P2 ;NO KEYWORDS
SETOM EOLF ;MARK THAT THE EOL WS SEEN
JRST REMOTE ;GO SET THIS LINE UP
;IF HERE, LINES ARE REMOTE
AUTO: TXOA P2,MO%AUT ;SET THE AUTO BUAD BIT
REMOTE: TXO P2,MO%RMT ;SET THE REMOTE BIT
HRRZ A,LINES ;GET FIRST LINE
HLRZ B,LINES ;GET LAST LINE
SUBI B,1(A) ;GET # TO DO
HRLI A,0(B) ;AN AOBJN WORD
HLR A,LINES ;FIRST LINE AGAIN
DOLINE: SKIPN P1 ;SETTING SPEED?
IORM P2,REMTBL(A) ;SAY IT IS REMOTE
SKIPE P1 ;SETTING REMOTE?
MOVEM P1,SPDTBL(A) ;NO. SET SPEED
SKIPN SPDTBL(A) ;HAVE A SPEED YET?
SKIPE EOLF ;NO, IS THIS THE END OF LINE?
SKIPA ;YES, SET THE SPEED
JRST REMOT1 ;NO. GO ON UNITIL ONE APPEARS
PUSH P,A ;SAVE LINES
CALL SPDSET ;GO SET THE SPEED
POP P,A ;RESTORE AOBJN WORD
REMOT1: AOBJN A,DOLINE ;GO DO ALL OF THEM
SKIPE EOLF ;FOUND AN EOF?
JRST CMND ;YES. GO DO COMMAND
JRST LNKEY ;NO
; HERE TO SET THE "IGNORE INPUT" (NO BELLS) BIT
NOBELL: HRRZ D,LINES ;GET LAST LINE NUMBER
HLRZ B,LINES ;GET FIRST LINE NUMBER
SUBI B,1(D) ;FORM - NUMBER IN RANGE
HRLI D,(B) ;FORM AN AOBJN POINTER TO LOOP
HLR D,LINES ; OVER ALL THE LINES IN THE RANGE
NOBEL1: MOVEI A,400000(D) ;GET LINE DESIGNATOR
MOVX B,.MOSIG ;SET "IGNORE INPUT" BIT
MOVX C,1 ;TURN THE BIT ON
MTOPR ;SET THE LINE TO IGNORE CHARACTERS UNTIL OPENED
ERJMP .+1 ;IGNORE FAILURE HERE
AOBJN D,NOBEL1 ;LOOP OVER ALL THE LINES IN THE INDICATED RANGE
JRST LNKEY ;GO GET THE NEXT KEYWORD IN THE COMMAND
;SET LINE SPEEDS
SPEED: CALL PBLANK ;SKIP BLANKS
JRST CMND ;GIVE IT UP
HLRZ A,JFN ;THE FILE
MOVEI C,^D10 ;GET SPEED IN DECIMAL
NIN ;GET IT
JRST PURGE1 ;GIVE UP
HRRZ P1,B ;SAVE SPEED
HRLI P1,400000(B) ;IN CASE NO MORE
BKJFN ;LOOK AT TERMINATOR
JFCL
BIN ;GET IT
CAIN B,.CHLFD ;A LINE FEED?
SETOM EOLF ;YES. REMEMBER THIS
SKIPE EOLF
JRST REMOTE ;GO DO IT
CALL PBLANK ;GO FIND OTHER SPEED
JRST [ SETOM EOLF ;REMEMBER EOL
JRST REMOTE] ;GO SET THE SPEED
MOVEI C,^D10
NIN ;READ THE BYTE
JRST PURGE1 ;BLEW IT
HRRI P1,0(B) ;SAVE OUTPUT SPEED
BKJFN
JFCL
BIN
CAIN B,.CHLFD ;A LINE FEED?
SETOM EOLF ;REMEMBER EOL
JRST REMOTE ;GO SET SPEEDS
;ROUTINE TO SET SPEED OF A LINE.
;INPUT IS : A/ LINE NUMBER
SPDSET: MOVEI A,0(A) ;CLEAN UP ARG
SKIPE REMTBL(A) ;THIS A REMOTE SETTING?
JRST SPDST1 ;YES. ALWAYS USE FILE SETTING
MOVEI A,400000(A) ;GET TTY DESIGNATOR
MOVEI B,.MORSP ;GET SPEED FROM MONITOR
MTOPR ;GET IT
ERJMP REMOT2 ;?
TRZ A,400000
SKIPG C ;GET IT?
SPDST1: MOVE C,SPDTBL(A) ;NO. USE FILE'S VALUE
TLZ C,(1B0) ;GET RID OF SIGN BIT
MOVEI B,.MOSPD ;SPEED SETTING
IOR B,REMTBL(A) ;ADD IN THE REMOTE AND AUTO BITS (IF ANY)
TRO A,400000 ;TTY DESIGNATOR
MTOPR ;DO IT
ERJMP REMOT2 ;IGNORE ERROR
MOVEI B,.MORNT ;REQ MSG SUPPRESS STATUS FROM
MTOPR ;MONITOR FOR TTY (A/ TTY#)
ERJMP REMOT2 ;IGNORE ERROR
MOVEI B,.MOSNT ;SET MSG SUPPRESS BIT FOR TTY
MTOPR ;SAME AS BEFORE
ERJMP REMOT2 ;IGNORE ERROR
REMOT2: RET ;ALL DONE
;ROUTINE TO APPLY DEFAULT SPEEDS AT EOF
FINISH: MOVE A,[SIXBIT /TTYJOB/] ;FIRST FIND # OF TTY'S
SYSGT ;GET IT
HLLZ P3,B ;MAKE AOBJN POINTER
FIN1: SKIPE SPDTBL(P3) ;THIS ONE SET YET?
JRST FIN2 ;YES. GO ON
MOVEI A,0(P3) ;NO. GET LINE #
MOVE B,[^D300,,^D300] ;DEFAULT SPEED
MOVEM B,SPDTBL(A) ;STORE IT
CALL SPDSET ;GO SET THE SPEED
FIN2: AOBJN P3,FIN1 ;DO ALL LINES
CALL REFILL ;GO LOAD THE CACHE REFILL ALGORITHM
HALTF ;AND DONE
;THIS CODE PROCESSES THE MAGTAPE CONFIGURATION COMMANDS. FORMAT
;OF A COMMAND LINE IS:
; MAGTAPE "LUN" "SERIAL#" "SLAVE"
MAGTAP: SKIPN EOLF ;AT EOL YET?
CALL PBLANK ;NO. GET TO LUN THEN
JRST CMND ;NO MORE STUFF
HLRZ A,JFN ;GET INPUT
MOVEI C,10 ;GET NUMBER IN OCTAL
NIN ;GET LUN
JRST PURGE1 ;BAD LINE
MOVE P1,B ;SAVE LUN
CALL PBLANK ;GET TO NEXT VALUE
JRST CMND ;BAD LINE. JUST GO SKIP IT
MOVE D,P1 ;RESOTRE LUN
MOVEI C,12 ;GET DECIMAL SERIAL NUMBER
HLRZ A,JFN ;THE JFN
NIN ;DO IT
JRST PURGE1 ;BAD COMMAND
HRRZ P2,B ;SAVE SERIAL NUMBER
BKJFN ;LOOK FOR TERMINATOR
HLRZ A,JFN ;READ A CHARACTER
BIN ;GET IT
CAIN B,.CHLFD ;LINEFEED?
JRST MAGTP1 ;YUP END
CALL PBLANK ;REMOVE BLANKS
JRST MAGTP1 ;END OF COMMAND
HRROI A,BUFFER ;READ REST
MOVEM A,BUFPTR
MOVEI A,SIZEB ;STORE SIZE
MOVEM A,COUNT
MOVX A,RD%JFN!RD%BEL!RD%PUN
MOVEM A,FLAGS
MOVEI A,TEXT ;FIND ARGUMENT
TEXTI ;GET STRING
JRST FINISH ;QUIT END OF FILE
MOVX A,RD%BTM ;CHECK FOR CORRECT TERMINATION
TDNN A,FLAGS
JRST [CALL SEEEOF ;CHECK FOR EOF
JRST PURGE
JRST FINISH] ;DONE
MOVE A,BUFPTR ;GET TERMINATOR
LDB C,A ;GET TERMINATING CHARACTER
CAIE C,.CHLFD ;LF?
JRST MAGTP2
BKJFN ;BACKUP OVER LF
JSERR ;UNEXPECTED ERROR
MOVEM A,BUFPTR ;SAVE NEW STRING POINTER
MAGTP2: SETZ A, ;STORE NUL
DPB A,BUFPTR ;TERMINATE STRING
MOVEI A,SLAVT ;GET SLAVE TABLE
HRROI B,BUFFER ;CHECK FOR MATCH
TBLUK
TXNN B,TL%EXM!TL%ABR ;CORRECT MATCH?
JRST [SKIPE EOLF ;NO AT END OFLINE?
JRST CMND ;YES. GO ON TO NEXT ONE
JRST PURGE1] ;NOPE PURGE JUNK
HRL P1,(A) ;GET UNIT TYPE
MAGTP1: MOVE A,P1 ;SET LUN
MOVE B,P2 ;SET SERIAL #
MTALN ;DO IT
ERJMP [ HRROI A,[ASCIZ /
? SETSPD: COULD NOT SET MTA /]
PSOUT
MOVEI A,.PRIOU ;TO THE CTY
EXCH B,D ;GET MTA, SAVE SERIAL #
MOVEI C,10 ;IN OCTAL
NOUT ;DO IT
JFCL
HRROI A,[ASCIZ / SERIAL # /]
PSOUT
MOVEI A,.PRIOU
MOVE B,D
MOVEI C,12
NOUT ;OUPUT THE SERIAL # AS WELL
JFCL
JRST .+1] ;AND DONE
JRST PURGE1 ;GO SYNCH LINE
; ENABLE COMMAND
DISABL: TDZA P1,P1 ;MARK THAT THIS IS A DISABLE COMMAND
ENABLE: SETOM P1 ;MARK THAT THIS IS AN ENABLE COMMAND
SKIPE EOLF ;AT END OF COMMAND ?
JRST CMND ;YES, GO GET NEXT LINE
CALL PBLANK ;SKIP BLANKS
JRST CMND ;PUNT
HRROI A,BUFFER ;WHERE TO STASH IT
MOVEM A,BUFPTR ;TO THE ARG BLOCK
MOVEI A,SIZEB ;THE SIZE OF IT
MOVEM A,COUNT ;TO THE BLOCK
MOVX A,RD%JFN!RD%BEL
MOVEM A,FLAGS ;TO ARG BLOCK
MOVEI A,TEXT ;THE ARG BLOCK
TEXTI ;GET DEFINITION
JRST FINISH ;FILE IS SCREWED UP
MOVX A,RD%BTM ;SEE IF PROPERLY TERMINATED
TDNN A,FLAGS ;IS IT?
JRST [ CALL SEEEOF ;NO. SEE IF EOF THEN
JRST PURGE ;NOT. DO MORE PURGING
JRST FINISH] ;YES. ALL DONE
MOVE A,BUFPTR ;GET BYTE POINTER
LDB C,A ;GET TERMINATING CHARACTER
CAIE C,.CHLFD ;TERMINATED BY A LINE FEED ?
JRST ENA010 ;NO, GO ON
BKJFN ;YES, BACK UP TO CARRIAGE RETURN
JSERR ;UNEXPECTED ERROR
MOVEM A,BUFPTR ;SAVE NEW POINTER TO TERMINATOR
ENA010: MOVEI A,.CHNUL ;GET A NULL
DPB A,BUFPTR ;TERMINATE STRING
MOVEI A,ENAOPT ;GET ADDRESS OF OPTION TABLE
SKIPL P1 ;IS THIS AN ENABLE COMMAND ?
MOVEI A,DISOPT ;NO, USE DISABLE OPTION TABLE
HRROI B,BUFFER ;GET POINTER TO OPTION REQUESTED
TBLUK ;FIND OPTION IN TABLE
TXNN B,TL%EXM!TL%ABR ;FOUND A MATCH ?
JRST [ SKIPE EOLF ;NO, AT END OF LINE ?
JRST CMND ;YES, GO ON TO NEXT COMMAND
JRST PURGE1 ] ;NO, IGNORE REMAINDER OF LINE
HRRZ A,(A) ;GET ADDRESS OF PROCESSING ROUTINE
CALL (A) ;GO PERFORM INDICATED FUNCTION
SKIPE EOLF ;AT END OF LINE YET ?
JRST CMND ;YES, GO ON TO NEXT COMMAND
JRST PURGE1 ;NO, IGNORE REMAINDER OF LINE
; HERE TO PERMIT CHANGING DIRECTORY PARAMETERS
DISDIR: TDZA B,B ;TURN OFF THE PARAMETER
ENADIR: MOVEI B,1 ;TURN ON THE OPTION
MOVEI A,.SFCRD ;GET FUNCTION CODE
SMON ;TELL THE MONITOR
RET ;RETURN
; HERE TO ENABLE ACCOUNT VALIDATION
DISACT: TDZA B,B ;TURN OFF ACCOUNT VALIDATION
ENACCT: MOVEI B,1 ;TURN ON ACCOUNT VALIDATION
MOVEI A,.SFAVR ;GET THE FUNCTION CODE
SMON ;TELL THE MONITOR
RET ;RETURN
DISFLO: TDZA B,B ;TURN OFF FULL LATENCY OPTIMIZATION
ENAFLO: MOVEI B,1 ;TURN ON FULL LATENCY OPTIMIZATION
MOVEI A,.SFFLO ;GET THE SMON FUNCTION CODE
SMON ;SET THE DESIRED STATE
RET ;AND RETURN
;DEFINE A LOGICAL NAME
DEFINE: SKIPE EOLF ;AT EOL?
JRST CMND ;YES. GET NEXT COMMAND
CALL PBLANK ;GO FIND LOGICAL NAME
JRST CMND ;NO ARGS
HRROI A,BUFFER ;WHERE TO STASH IT
MOVEM A,BUFPTR ;TO THE ARG BLOCK
MOVEI A,SIZEB ;THE SIZE OF IT
MOVEM A,COUNT ;TO THE BLOCK
MOVX A,RD%JFN!RD%PUN!RD%BEL
MOVEM A,FLAGS ;TO ARG BLOCK
MOVEI A,TEXT ;THE ARG BLOCK
TEXTI ;GET DEFINITION
JRST FINISH ;FILE IS SCREWED UP
MOVX A,RD%BTM ;SEE IF PROPERLY TERMINATED
TDNN A,FLAGS ;IS IT?
JRST [ CALL SEEEOF ;NO. SEE IF EOF THEN
JRST PURGE ;NOT. DO MORE PURGING
JRST FINISH] ;YES. ALL DONE
LDB A,BUFPTR ;LOOK AT TERMINATER
CAIN A,.CHLFD ;A LINE FEED?
JRST CMND ;YES. NOTHING TO DEFINE THEN
SETZ A, ;GET RID OF THE TERMINATER
DPB A,BUFPTR ;TIE IT OFF
CALL PBLANK ;GET TO DEFINITION
JRST CMND ;NOTHING TO DEFINE
PUSH P,BUFPTR ;SAVE START OF DEFINITION
MOVX A,RD%JFN!RD%BEL ;GET REST OF COMMAND
MOVEM A,FLAGS
MOVEI A,TEXT ;THE BLOCK
TEXTI ;GOBBLE DOWN THE DEFINITION
JRST FINISH ;BAD FILE
POP P,C ;THE DEFINITION
MOVX A,RD%BTM ;SEE IF PROPERLY TERMINATED
TDNN A,FLAGS ;IS IT?
JRST [ CALL SEEEOF ;NO. SEE IF EOF
JRST PURGE ;NOT. ILLEGAL THEN
JRST FINISH] ;IS. ALL DONE
HRROI B,BUFFER ;THE LOGICAL NAME
MOVEI A,.CLNSY ;CREATE A SYSTEM NAME
CRLNM ;DO IT
JRST [ TMSG <
? SETSPD: FAILED TO DEFINE LOGICAL NAME >
HRROI A,BUFFER ;GET NAME
PSOUT ;OUTPUT IT
TMSG < BECAUSE:
> ;AND A REASON
MOVEI A,.PRIOU ;THE OUTPUT PLACE
HRLOI B,.FHSLF ;US
SETZ C,
ERSTR ;OUTPUT THE MESSAGE
JFCL
JFCL
JRST CMND] ;GO DO MORE
JRST CMND ;GO DO MORE
;SET LOCAL TIME ZONE; IT MUST BE A NUMBER FROM -12 TO 12
TIMZON: SKIPN EOLF ;GET TO THE ARGUMENT
CALL PBLANK ; ...
JRST CMND ;NONE THERE
HLRZ A,JFN ;NOW READ A NUMBER FOR THE TIMEZONE
MOVEI C,12 ; IN DECIMAL
NIN
JRST PURGE1 ;NOT A GOOD ARGUMENT
MOVM D,B ;CHECK IT FOR RANGE
CAILE D,^D12 ;MUST BE FROM -12 TO 12 DECIMAL
JRST [ TMSG <
? setspd: illegal time zone value
>
JRST PURGE1] ;GO RE-SYNCH LINE
MOVEI A,.SFTMZ ;SET TIME ZONE
SMON ;ARGUMENT IN B
ERJMP TZERR
JRST PURGE1 ;SUCCESS, ON TO NEXT COMMAND
;ATTEMPT TO SET TIME ZONE FAILED
TZERR: TMSG <
? setspd: unable to set time zone because:
>
GENERR: MOVEI A,.PRIOU ;TYPE OUT MONITOR ERROR
HRLOI B,.FHSLF ; FOR THIS FORK
ERSTR
JFCL
JFCL
JRST PURGE1 ;ON TO NEXT LINE
;SET LOCAL HOST NUMBER OF AN ARPANET SITE
HOST: SKIPN EOLF ;GET TO THE ARGUMENT
CALL PBLANK ; ...
JRST CMND ;NONE THERE
HLRZ A,JFN ;READ A NUMBER FOR THE SITE ADDRESS
MOVEI C,10 ; IN OCTAL
NIN
JRST PURGE1 ;NOT A GOOD ARGUMENT
MOVEI A,.SFLHN ;SET LOCAL HOST NUMBER
SMON
ERJMP HSTERR ;FAILED?
JRST PURGE1 ;NO, ON TO NEXT COMMAND
HSTERR: TMSG <
? setspd: unable to set arpanet site address because:
>
JRST GENERR
;COMMAND TO DECLARE DECNET NODE NAME
NODNAM: SKIPE EOLF ;AT THE END-OF-COMMAND?
NODNA1: JRST [ TMSG <
?SETSPD: Invalid name given for NODE command
>
JRST PURGE1] ;AND DO IT AGAIN
CALL PBLANK ;SKIP BLANKS
JRST NODNA1 ;ERROR
MOVEI A,SIZEB ;SIZE OF BUFFER
MOVEM A,COUNT
HRROI A,BUFFER ;WHERE NAME WILL GO
MOVEM A,BUFPTR ;TO ARG BLOCK
MOVX A,RD%JFN!RD%PUN!RD%BEL!RD%CRF ;FLAGS
MOVEM A,FLAGS
MOVEI A,TEXT ;ARG BLOCK
TEXTI ;GET NAME
JRST FINISH ;FILE IS BAD. GO WRAP UP
MOVX A,RD%BTM ;SEE IF FOUND TERMINATOR
TDNN A,FLAGS ;DID WE?
JRST NODNA1 ;NO. ERROR THEN
LDB A,BUFPTR ;GET TERMINATOR?
CAIN A,.CHLFD ;EOL?
SETOM EOLF ;YES. REMEMBER THIS
MOVEI A,.CHNUL ;GET A NULL
DPB A,BUFPTR ;ZAP POINTER
SKIPN EOLF ;AT EOL?
CALL PBLANK ;SKIP TO NEXT FIELD
JRST [ SETZM D ;AT THE END. DON'T SET NUMBER
JRST NODNA2]
HLRZ A,JFN ;GET FILE JFN
MOVEI C,12 ;GET OCTAL NUMBER
NIN ;""
NODNA3: JRST [ TMSG <
?SETSPD: Illegal node number in NODE command
>
JRST PURGE1] ;SKIP REMAINDER OF COMMAND
MOVE D,B ;SAVE NUMBER
NODNA2: MOVEI A,.NDSLN ;WANT TO SET NODE NAME
MOVEI B,C ;ARG BLOCK
HRROI C,BUFFER ;WHERE NAME IS
NODE ;DO IT
ERJMP NODNA1 ;IF FAILED, GO AWAY
JUMPE D,PURGE1 ;IF NO NUMBER, GO ON
MOVEI A,.NDSNM ;SET NODE NUMBER
MOVEI B,D ;WHERE THE NUMBER IS
NODE ;SET IT
ERJMP NODNA3 ;BAD!!
JRST PURGE1 ;NAME IS SET
; ROUTINE TO LOAD A RAM OR VFU
LPTLOD: SKIPE EOLF ;AT END-OF-COMMAND ?
JRST CMND ;YES, GO GET NEXT LINE
CALL PBLANK ;SKIP BLANKS
JRST CMND ;PUNT
; READ LPT UNIT NUMBER FROM FILE
STKVAR <LODUNI,LODFNC,LODJFN,LODLCP,LPTJFN>
SETZM LODJFN ;INIT THIS TO ZERO
SETZM LODLCP ;ASSUME PRINTER IS NOT LOWER CASE
HLRZ A,JFN ;GET JFN OF FILE TO READ
MOVEI C,^D8 ;USE OCTAL FOR UNIT NUMBER
NIN ;INPUT THE PRINTER UNIT NUMBER
JRST PURGE1 ;ERROR, IGNORE REMAINDER OF LINE
MOVEM B,LODUNI ;SAVE LPT UNIT NUMBER
; SEE IF RAM OR VFU IS TO BE LOADED
LPLD20: CALL PBLANK ;SKIP BLANKS
JRST PURGE1 ;NO MORE ARGS, IGNORE REST OF LINE
MOVEI A,SIZEB ;SIZE OF BUFFER
MOVEM A,COUNT ;TO ARG BLOCK
HRROI A,BUFFER ;WHERE DATA IS GOING
MOVEM A,BUFPTR
MOVX A,RD%JFN!RD%PUN!RD%BEL ;FLAGS
MOVEM A,FLAGS ;TO THE ARGS
MOVEI A,TEXT ;ARG BLOCK
TEXTI ;READ KEY VALUE
JRST FINISH ;FILE IS SCREWED UP. GO FINISH
MOVX A,RD%BTM ;SEE IF FOUND TERMIANTOR
TDNN A,FLAGS ;DID WE?
JRST [ CALL SEEEOF ;NO. AT EOF?
JRST PURGE ;NO. SKIP REST OF LINE
JRST FINISH] ;YES. DONE
LDB A,BUFPTR ;GET TERMINATOR
SETZM EOLF ;NOT AN EOL
CAIN A,.CHLFD ;WAS IT A LINE FEED?
SETOM EOLF ;YES. REMEMBER THIS
;..
;..
MOVEI A,.CHNUL ;GET A NULL CHARACTER
DPB A,BUFPTR ;TERMINATE KEYWORD WITH A NULL
MOVEI A,LPTTAB ;GET ADDRESS OF TABLE OF OPTIONS
HRROI B,BUFFER ;GET POINTER TO TEXT ARGUMENT IN FILE
TBLUK ;LOOK FOR OPTION SPECIFIED
TXNN T2,TL%EXM!TL%ABR ;FOUND A MATCH ?
JRST [ SKIPE EOLF ;NO, HAS END-OF-LINE BEEN SEEN ?
JRST CMND ;YES, GO DO NEXT COMMAND
JRST PURGE1 ] ;NO, IGNORE REMAINDER OF LINE
HRRZ A,(A) ;GET FUNCTION TO PERFORM
CAIN A,.MOSTS ;SET STATUS FUNCTION (DECLARE LOWER CASE LPT) ?
JRST [ SETOM LODLCP ;YES, FLAG THAT PRINTER SHOULD BE LOWER CASE
JRST LPLD20 ] ;GO GET NEXT ARGUMENT
MOVEM A,LODFNC ;SAVE DESIRED FUNCTION (MTOPR CODE)
; READ FILENAME TO BE LOADED AND GET A JFN FOR IT
CALL PBLANK ;SKIP ANY BLANKS
JRST PURGE1 ;NO MORE DATA
MOVX T1,GJ%SHT!GJ%FNS!GJ%OLD ;EXISTING FILE, PHYSICAL ONLY
HLLZ T2,JFN ;GET JFN OF FILE TO READ NAME FROM
HRRI T2,.NULIO ;NO EDITING OUTPUT JFN
GTJFN ;GET A JFN FOR FILE TO BE LOADED
JRST LODERR ;FAILED
MOVEM A,LODJFN ;SAVE JFN
HLRZ A,JFN ;GET JFN FOR COMMAND FILE
BKJFN ;BACK UP ONE CHARACTER
JFCL ;IGNORE ERRORS
BIN ;GET LAST CHARACTER READ
CAIN B,.CHLFD ;READ AN END-OF-LINE ?
SETOM EOLF ;YES, INDICATE EOL SEEN
; OPEN THE PRINTER AND VERIFY THAT NO RAM OR VFU IS NOW LOADED
HRROI A,FILNAM ;GET POINTER TO WHERE DEVICE STRING GOES
MOVSI B,600007 ;GET LPT DEVICE DESIGNATOR
HRR B,LODUNI ;GET UNIT NUMBER
DEVST ;GET DEVICE NAME STRING
JRST LODERR ;FAILED
MOVEI B,":" ;GET TERMINATOR FOR GTJFN
IDPB B,A ;TERMINATE DEVICE NAME
SETZ B,
IDPB B,A ;TIE IT OFF
MOVX A,GJ%SHT!GJ%FOU ;SHORT CALL, FOR OUTPUT USE
HRROI B,FILNAM ;GET POINTER TO DEVICE NAME
GTJFN ;GET A JFN FOR THE PRINTER
JRST ENDLPT ;ALREADY ASSIGNED
MOVEM A,LPTJFN ;SAVE LPT JFN
MOVX B,<FLD(7,OF%BSZ)+OF%WR> ;OPEN FOR WRITE
OPENF ;OPEN THE PRINTER
JRST [ EXCH A,LPTJFN ;MUST BE OPEN ALREADY, GET BACK JFN
RLJFN ;RELEASE THE JFN
JFCL ;IGNORE ERRORS HERE
MOVE A,LPTJFN ;GET BACK ERROR CODE
CAIE A,OPNX9 ;ALREADY OPENED BY SOMEONE?
JRST LODANY ;NO. LOAD ANYWAY
JRST ENDLPT ] ;GO ON TO NEXT COMMAND
MOVEI B,.MOPSI ;GET OFF-LINE INTS
MOVEI C,P1 ;SET UP ARGS IN REGISTERS
MOVEI P1,3 ;3 WORDS
SETZB P2,P3 ;CHANNEL 0, NO FLAGS
MTOPR ;DO IT
ERJMP .+1 ;IN CASE SOMETHING TERRIBLE HAPPENED
GDSTS ;GET CURRENT STATUS
TXZ B,MO%LVU!MO%LCP!MO%EOF ;TURN OFF CONDITION BITS
JUMPN B,INERR ;IF AN ERROR, PUNT IT
MOVEI B,14 ;IF NO ERROR, ALIGN FORMS
BOUT ;DO IT
ERJMP .+1 ;IGNORE FAILURE
INERR: DMOVE B,[-1,,FILNAM
5*^D28] ;ARGS
DMOVEM B,MTBLK+1 ;TO ARG BLOCK
MOVE C,LODFNC ;GET FUNCTION TO PERFORM
MOVX B,.MORTR ;GET READ-RAM FUNCTION CODE
CAIE C,.MOLTR ;ARE WE LOADING THE RAM ?
MOVX B,.MORVF ;NO, GET READ-VFU FUNTION
MOVEI C,MTBLK ;GET ADDRESS OF BLOCK
SETZM FILNAM ;MAKE IT LOOK AS IF IT IS NOT LOADED
MTOPR ;READ FILENAME ALREADY LOADED
ERJMP .+1 ;UNEXPECTED ERROR. LOAD RAM ANYWAY
MOVE A,LPTJFN ;GET JFN FOR PRINTER
CLOSF ;CLOSE THE FILE
FCLOSE: JRST [ MOVE A,LPTJFN ;FAILED. GET JFN AGAIN
TXO A,CZ%ABT ;DO IT NOW WITH ABORT
CLOSF ;DO IT
JFCL ;HAS TO WORK
JRST .+1] ;ALL DONE
LDB A,[POINT 7,FILNAM,6] ;GET FIRST BYTE RETURNED
JUMPN A,ENDLPT ;IF NOT-NULL, GO ON TO NEXT COMMAND
; GET JFN, FUNCTION, AND UNIT # AND LOAD THE RAM OR VFU
LODANY: MOVE B,LODFNC ;GET FUNCTION TO BE PERFORMED
MOVE A,LODJFN
MOVE C,LODUNI ;GET UNIT NUMBER OF PRINTER
SKIPE LODLCP ;IS THIS PRINTER LOWER CASE ?
TXO B,MO%LCP ;YES, MARK THAT PRINTER IS LOWER CASE
LPINI ;LOAD RAM OR VFU
ERJMP LODERR ;ERROR - TELL SOMEONE
; HERE TO FINISH UP AND GO DO NEXT COMMAND
ENDLPT: MOVE P,[IOWD 20,PDL] ;RESET STACK
SKIPE EOLF ;AT END OF COMMAND YET ?
JRST CMND ;YES, GO DO NEXT COMMAND
JRST PURGE1 ;NO, IGNORE REST OF LINE
; HERE ON AN ERROR LOADING THE RAM OR VFU
LODERR: TMSG <
? SETSPD: Could not load the >
HRROI A,[ASCIZ/VFU/] ;GET TEXT
MOVE B,LODFNC ;GET FUNCTION BEING PERFORMED
CAIE B,.MOLVF ;ARE WE LOADING THE VFU ?
HRROI A,[ASCIZ/RAM/] ;NO, GET RAM TEXT
PSOUT ;TELL USER WHAT WE ARE LOADING
TMSG < for PLPT> ;GET UNIT NAME
MOVEI A,.PRIOU ;GET PRIMARY OUTPUT JFN
MOVE B,LODUNI ;GET UNIT NUMBER
MOVEI C,^D8 ;GET OCTAL RADIX
NOUT ;OUTPUT THE UNIT NUMBER
JFCL ;IGNORE ERRORS HERE
TMSG <
> ;END OF MESSAGE
SKIPE A,LODJFN ;GET JFN FOR FILE TO HAVE BEEN LOADED
CLOSF ;MAKE SURE IT IS REALLY CLOSED AND RELEASED
JFCL ;PROBABLY CLOSED BY MONITOR ALREADY ANYHOW
JRST ENDLPT ;GO FINISH UP
;LPT OFF-LINE INTERRUPT ROUTINE
LPTINT: MOVEI A,@FCLOSE ;REDIRECT CODE TO CLOSE AND ABORT DEVICE
MOVEM A,ADDR ;ZAP THE OLD PC WORD
DEBRK ;AND GO FINISH UP
;ROUTINE TO PULL ANY UNQUEUED SYSERR BLOCKS OUT OF THE CRASH DUMP
; AND QUEUE THEM UP TO SYSERR
QUEBLK:
; SAVEP
MOVE T1,[SIXBIT /DBUGSW/] ;CHECK ON STATE OF SYSTEM
SYSGT ;READ DBUGSW
SKIPE T2 ;FOUND IT?
CAIGE T1,2 ;YES. IS IT STAND-ALONE?
SKIPA ;NO. DO THE DUMP
RET ;YES. DON'T DO ANYTHING
TRVAR <QUEJFN,QUEFRK,QUEPGS>
SETZ T1, ;GET A FORK TO LOAD DUMP.EXE INTO
CFORK
RET ;COULD NOT GET A FORK, SO JUST EXIT
MOVEM T1,QUEFRK ;SAVE FORK HANDLE
MOVX T1,GJ%OLD!GJ%SHT ;GET A JFN FOR <SYSTEM>DUMP.EXE
HRROI T2,[ASCIZ/PS:<SYSTEM>DUMP.EXE/]
GTJFN
JRST QUEKFK ;NO DUMP FILE, NOTHING TO DO
MOVEM T1,QUEJFN ;SAVE JFN
MOVE T2,[440000,,OF%RD!OF%WR!OF%THW]
OPENF ;OPEN THE FILE FOR READ/WRITE THAWED
JRST [ MOVE T1,QUEJFN ;FAILED, CLEAN UP
RLJFN
JFCL
JRST QUEKFK]
HRLI T1,.FBPRT ;SET THE PROTECTION OF DUMP.EXE TO 770000
MOVEI T2,-1 ;RIGHT HALF PROTECTION BITS
MOVEI T3,770000 ;MUCHO PROTECTION
CHFDB ;THIS FILE MUST BE PROTECTED FOR SECURITY
ERJMP .+1
HRLZ T1,QUEJFN ;NOW MAP IN DIR PAGE
MOVE T2,[.FHSLF,,PG0PG]
MOVX T3,PM%RD!PM%WT ;READ AND WRITE
PMAP
HRRZ T1,PG0ADR ;GET LENGTH OF DIRECTORY BLOCK
HRRZ T2,PG0ADR-2(T1) ;GET STARTING FILE PAGE # OF LAST GROUP
HLRZ T3,PG0ADR-1(T1) ;GET HALFWORD CONTAINING REPEAT COUNT
LSH T3,-9 ;RIGHT JUSTIFY REPEAT COUNT
ADD T2,T3 ;COMPUTE # OF FILE PAGES TO MAP
MOVEM T2,QUEPGS ;SAVE PAGE NUMBER
HRRZ T1,PG0ADR ;GET LENGTH OF HEADER BLOCK OF DIR
HLRZ T2,PG0ADR(T1) ;GET CODE OF NEXT BLOCK
CAIE T2,1775 ;ENTRY VECTOR?
JRST QUEDON ;NO, GIVE UP
HRRZ T2,PG0ADR(T1) ;GET LENGTH
CAIGE T2,4 ;CORRECT LENGTH?
JRST QUEDON ;NO, GIVE UP
SKIPE PG0ADR+3(T1) ;ALREADY LOOKED AT THIS DUMP?
JRST QUEDON ;YES, GIVE UP
SETOM PG0ADR+3(T1) ;NO, MARK THAT WE HAVE NOW SEEN IT
SETO T1, ;AND UNMAP THE PAGE
MOVE T2,[.FHSLF,,PG0PG]
SETZ T3,
PMAP
HRRZ T1,QUEJFN ;GET JFN OF ORIGINAL DUMP FILE
MOVE T2,QUEPGS ;GET HIGHEST PAGE NUMBER TO COPY
CALL CPYDMP ;GO COPY THE DUMP