Trailing-Edge
-
PDP-10 Archives
-
BB-H138C-BM
-
galaxy-sources/oprqsr.mac
There are 40 other files named oprqsr.mac in the archive. Click here to see a list.
TITLE OPRQSR ORION MODULE TO PROCESS QUASAR MESSAGES
SUBTTL Murray Berkowitz 8 Oct 79
;
;
; COPYRIGHT (c) 1975,1976,1977,1978,1979
; DIGITAL EQUIPMENT CORPORATION
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED
; AND COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE
; AND WITH THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS
; SOFTWARE OR ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR
; OTHERWISE MADE AVAILABLE TO ANY OTHER PERSON. NO TITLE TO
; AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE
; WITHOUT NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT
; BY DIGITAL EQUIPMENT CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY
; OF ITS SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY
; DIGITAL.
SEARCH GLXMAC,ORNMAC,QSRMAC
PROLOG(OPRQSR)
ERRSET ;INITIALIZE ERROR TABLES
PARSET ;SETUP PARSER ENTRIES
QSREDT==:43 ;OPRQSR EDIT NUMBER
EXTERNAL G$ARG1 ;ARGUMENT 1
EXTERNAL G$ARG2 ;ARGUMENT 2
EXTERNAL G$ARG3 ;ARGUMENT 3
EXTERNAL G$OPRA ;OPR ADDRESS
EXTERNAL G$ERR ;ERROR FLAG WORD
EXTERNAL SNDQSR ;SEND TO QUASAR
EXTERNAL OPRENB ;OPR ENABLED
EXTERNAL MOVARG ;MOVE AN ARGUMENT
EXTERNAL CHKWHL ;CHECK FOR WHEEL CAPABILITY
ENTRY BLDOBJ ;BUILD OBJECT BLOCK
ENTRY ARGRTN ;SETUP ARGUMENT IN MESSAGE
ENTRY CMDEND ;COMMAND END PROCESSING
COMMENT \
THIS MODULE CONTAINS MOST OF THE MESSAGE PROCESSING FOR QUASAR.
REVISION HISTORY
1 OPRQSR Dec-5-78 Add Check for Remote Nodes and add node
Block in Quasar Messages
2 OPRQSR Dec-5-78 Add /SHORT AND /ALL FOR SHOW QUEUES
3 OPRQSR Dec-7-78 Add New Format for HOLD,RELEASE,MODIFY,
SHOW STATUS AND PARAMETERS
4 OPRQSR Dec-8-78 Add GETTAP for the -10
5 OPRQSR Jan-5-78 Add /SHORT to SHOW STATUS and /NODE to
SHOW QUEUE command
6 OPRQSR JAN-10-78 USE ONLY NODE NAME WHEN DEFAULTING OBJECT
BLOCK FOR -10 AND -20
7 OPRQSR JAN-19-79 ADD LIMITED EXCEEDED ACTION AND PRIORITY
SETTING FOR CDP,PLT,PTP
10 OPRQSR JAN-23-79 ADD -20 SETJOB CODE
11 OPRQSR JAN-24-79 ADD SET ONLINE COMMAND FOR THE -20
12 OPRQSR JAN-31-79 ALLOW REQUEUE FOR CDP,PLT , AND PTP
13 OPRQSR FEB-2-79 CHANGE SHOW STA TAPE DEV FORM SHO STA DEV
14 OPRQSR FEB-6-79 ADD DN60 DEFINE, SET AND SHUTDOWN COMMANDS
15 OPRQSR Feb-27-79 Change Mount Command to be MOUNT STRUCTURE
then Structure name.
16 OPRQSR MAR-1-79 ADD SET TAPE INITIALIZE COMMAND
17 OPRQSR MAR-7-79 Add Bytes Per Message for DN60 and Unlabeled
as a label type
20 OPRQSR Mar-14-79 Fix Cancel bug
21 OPRQSR Mar-19-79 Send Node Numbers in Object Block on the -10
using symbol NOD.NX. (name on the -20)
22 OPRQSR Mar-26-79 Add IDENTIFY Command and remove Tape stuff from
the MOUNT command
23 OPRQSR Apr-5-79 Check Privileges on SET Job Command
24 OPRQSR Apr-8-79 Add Message on SET JOB commands
25 OPRQSR Apr-10-79 Add Support for new SHOW options for TAPE and
DISK
26 OPRQSR Apr-12-79 Add SWITCH Command for the -20
27 OPRQSR Apr-23-79 Add Scheduler Commands for the -20
30 OPRQSR May-2-79 Fix SHOW STATUS <OBJECT> to only show remote
Nodes
31 OPRQSR May-8-79 Add SHOW STATUS/PARAMETERS OF NETWORK-NODES
and START Node command
32 OPRQSR Jun-12-79 Remove AC PB from this module
33 OPRQSR Jul-9-79 Remove the MOUNT command
34 OPRQSR Jul-10-79 Fix Suppres Bug
35 OPRQSR Jul-11-79 Remove the UNLOAD command and add new DISMOUNT
command
36 OPRQSR Jul-24-79 Fix SET DISK ... UNAVAILABLE
37 OPRQSR Aug-9-79 Allow SHUTDOWN node without DN60 support
40 OPRQSR Aug-23-79 Add SET NODE SIGNON and NO-SIGNON-REQUIRED
for DN60
41 OPRQSR Sept-12-79 Support Terminals and Tapes on START command
with /DEVICE
42 OPRQSR Oct-8-79 Add LOCK,UNLOCK and ENABLE/DISABLE ASR
Also add SHOW STATUS STRUCTURE Command
43 OPRQSR Oct-8-79 Backspace and Forwardspace /FILE no longer
require or accept a number.
\
SUBTTL Table of Contents
; TABLE OF CONTENTS FOR OPRQSR
;
;
; SECTION PAGE
; 1. Murray Berkowitz 12 Apr 79......................... 1
; 2. Table of Contents......................................... 3
; 3. STOP(PAUSE),CONTINUE AND SHUTDOWN MESSAGES................ 3
; 4. START COMMAND............................................. 3
; 5. ARGRTN -- ARGUMENT HEADER AND BUMP ROUTINE.......... 4
; 6. CMDEND -- FINISH COMMAND MESSAGE AND SEND IT........ 5
; 7. BLDOBJ -- BUILD AN OBJECT BLOCK..................... 6
; 8. FINOBJ -- FINISH OBJECT BLOCK AFTER TYPE FIELD...... 6
; 9. FORWARDSPACE/BACKSPACE Commands........................... 7
; 10. LPTOBJ -- LINE PRINTER OBJECT SETUP................. 7
; 11. ALIGN COMMAND............................................. 8
; 12. SUPPRESS Command.......................................... 9
; 13. CANCEL -- CANCEL COMMAND PROCESSING................. 10
; 14. PREQNM -- Process /REQUEST ROUTINE.................. 11
; 15. PREASN -- Process /REASON ROUTINE................... 11
; 16. PUSER -- PROCESS USER BLOCK........................ 11
; 17. REQUEUE COMMAND PROCESSING................................ 12
; 18. ROUTE COMMAND............................................. 13
; 19. HOLD AND RELEASE COMMANDS................................. 14
; 20. PQTYPE -- PROCESS QUEUE TYPE FIELD.................. 14
; 21. PNODSW -- PROCESS NODE SWITCH....................... 15
; 22. CNODSW -- VALIDATE THE NODE SWITCH.................. 15
; 23. GNODSW -- GET NODE SWITCH IF PRESENT................ 15
; 24. Q$DELETE -- DELETE QUEUE ENTRIES.............. 16
; 25. CHKRMT -- CHECK FOR REMOTE NODE INPUT............... 17
; 26. Q$MODIFY -- Modify Queue Entry Command........ 18
; 27. SET -- PROCESS THE SET COMMAND................... 19
; 28. SETJOB -- SET OPERATOR VALUES FOR A JOB............. 20
; 29. SETPGL,SETFRM,SETLEA,SETOPL............................... 21
; 30. SETMEM,SETPRI,SETTIM AND OPERATOR ACTION.................. 21
; 31. SETONL -- SET ONLINE COMMAND FOR THE -20............ 22
; 32. SETSCH -- SET SCHEDULER FOR THE -20................. 23
; 33. SETNOD -- SET NODE COMMAND FOR DN60................. 24
; 34. SETDSK -- SET DISK COMMAND FOR -20.................. 25
; 35. SETTAP -- SET TAPE COMMAND FOR -20.................. 26
; 36. PSTAPE -- PROCESS TAPE DRIVE BLOCK.................. 27
; 37. PSTRUC -- PROCESS STRUCTURE BLOCK................... 27
; 38. PVOLID -- PROCESS VOLUME ID BLOCK................... 27
; 39. SETINI -- SET INITIALIZE COMMAND FOR TAPES.......... 28
; 40. SETDEN -- SET TAPE INIT DENSITY..................... 29
; 41. SETLBT -- SET THE LABEL TYPE........................ 29
; 42. SETOVR -- SET TAPE INIT OVERIDE FUNCTION............ 29
; 43. SETOWN -- SET TAPE INIT OWNER....................... 30
; 44. SETPRO -- SET THE PROTECTION FOR THE TAPE........... 30
; 45. SETCNT -- SET THE COUNT MULTIPLE INITIALIZATION..... 30
; 46. SETINC -- SET INCREMENT FOR NEXT VOLUME-ID.......... 30
; 47. SETSVI -- SET STARTING VOLUME NUMBER................ 30
; 48. SETTDP -- SET THE TAPE DISPOSITION WHEN DONE........ 30
; 49. SETVID -- SETUP VOLUME ID........................... 31
; 50. TABSRC -- TABLE SEARCH ROUTINE...................... 32
; 51. GETTAP -- GET A TAPE DEVICE......................... 33
; 52. SETSTR -- SET STRUCTURE COMMAND FOR -20............. 34
; 53. Q$SHWS -- SHOW STATUS ROUTINE....................... 35
; 54. Q$SHWP -- SHOW PARAMETERS ROUTINE................... 35
; 55. PROSHW -- PROCESS SHOW STATUS AND SHOW PARAMETERS... 36
; 56. SHWTAP -- SHOW TAPE STATUS.......................... 37
; 57. SHWDSK -- SHOW STATUS DISK DRIVES................... 38
; 58. Q$SHWQ -- SHOW QUEUES COMMAND....................... 39
; 59. Q$SHWC -- SHOW CONTROL FILE COMMAND................. 40
; 60. Q$DISMOUNT -- DISMOUNT COMMAND FOR THE -20...... 41
; 61. Q$RECOGNIZE -- RECOGNIZE COMMAND FOR THE -10..... 41
; 62. Q$UNLOAD -- UNLOAD COMMAND FOR TAPES.......... 41
; 63. Q$ETAPE -- ENABLE TAPE COMMAND....................... 42
; 64. Q$DTAPE -- DISABLE TAPE COMMAND...................... 42
; 65. Q$MOUNT -- MOUNT TAPE AND DISK COMMAND............... 43
; 66. Q$IDENTIFY -- IDENTIFY COMMAND FOR TAPES........ 44
; 67. Q$DEFINE -- DEFINE COMMAND FOR D60............ 45
; 68. Q$SWITCH -- SWITCH COMMAND FOR THE -20........ 46
SUBTTL STOP(PAUSE),CONTINUE AND SHUTDOWN MESSAGES
;THIS ROUTINE WILL SEND THE APPROPRIATE OBJECT BLOCK TO QUASAR
;FOR THE DESIRED FUNCTION..
;THE ROUTINE IS CALLED WITH S1 CONTAINING THE MESSAGE TYPE
Q$SHUTDN::
PUSHJ P,BLDOBJ ;BUILD THE OBJECT
JUMPT CMDEND ;FINISH OFF COMMAND
PUSHJ P,P$KEYW ;CHECK FOR KEYWORD
JUMPF .POPJ ;ERROR..RETURN
CAIE S1,.KYNOD ;WAS IT A NODE
$RETF ;BAD COMMAND
PUSHJ P,CHKWHL ;IS THE PROCESS ENABLED
JUMPF E$IPE ;INSUFFICIENT PRIVILEGES
PUSHJ P,P$NODE ;WAS IT A NODE?
JUMPF .POPJ ;NO..ERROR
PUSHJ P,SAVNOD ;SAVE THE NODE
PJRST CMDEND ;END THE COMMAND
Q$CONTIN::
Q$PAUSE:: PUSHJ P,BLDOBJ ;BUILD AN OBJECT BLOCK
JUMPF .POPJ ;RETURN FALSE BACK UP
PJRST CMDEND ;CHECK FOR END AND SEND MESSAGE
SUBTTL START COMMAND
;THE START COMMAND IS THE SAME AS THE SHUTDOWN, CONTINUE AND
;PAUSE(STOP) COMMANDS EXCEPT THAT THE START COMMAND FOR PRINTERS
;CAN HAVE AN OPTIONAL DEVICE FIELD.
Q$START:: PUSHJ P,Q$SHUTDN ;PROCESS THE FIRST PART
JUMPT .POPJ ;O.K..COMMAND FINISHED
MOVE S1,ARG.DA+.OHDRS+OBJ.TY(MO) ;GET THE OBJECT TYPE
CAIE S1,.OTLPT ;IS IT A PRINTER?
$RETF ;NO..INVALID MESSAGE
PUSHJ P,P$SWIT ;IS THERE A SWITCH?
JUMPF .POPJ ;NO..INVALID COMMAND
CAIE S1,.SWDEV ;WAS IT DEVICE?
$RETF ;NO..ERROR
LOAD S1,OBJ.UN+ARG.DA+.OHDRS(MO),OU.HRG ;GET HIGH RANGE
SKIPE S1 ;CHECK IF THERE IS ONE
PJRST E$RNA ;RANGE NOT ALLOWED IN START /DEVICE
PUSHJ P,P$DEV ;GET DEVICE BLOCK
JUMPF .POPJ ;RETURN FALSE
DMOVE T1,S1 ;SAVE THE ARGUMENTS
PUSHJ P,GETDES ;GET THE DEVICE DESIGNATOR
JUMPF E$IDS ;NO..ERROR..RETURN
TOPS10< TXNN S2,DV%MTA!DV%TTY> ;TAPE OR TTY?
TOPS20< CAIE S2,DV%MTA ;IS IT A TAPE
CAIN S2,DV%TTY ;IS IT A TTY
SKIPA ;O.K.
>;END TOPS20
PJRST E$IDS ;INVALID DEVICE SPECIFIED
DMOVE S1,T1 ;RESTORE THE ARGUMENTS
MOVX T1,.CMDEV ;TAPE DEVICE BLOCK
STORE T1,ARG.HD(S1),AR.TYP ;SAVE THE TYPE
PUSHJ P,MOVARG ;MOVE THE ARGUMENT
PJRST CMDEND ;NO CHECK FOR END AND RETURN
SUBTTL ARGRTN -- ARGUMENT HEADER AND BUMP ROUTINE
;THIS ROUTINE WILL SETUP THE ARGUMENT HEADER FROM THE
;TYPE IN S1 AND THE LENGTH IN S2. IT WILL ALSO ADVANCE P3 TO NEXT
;LOCATION IN MESSAGE AND BUMP ARGUMENT COUNT FOR MESSAGE
ARGRTN: STORE S1,ARG.HD(P3),AR.TYP ;SAVE THE TYPE FIELD
STORE S2,ARG.HD(P3),AR.LEN ;SAVE THE LENGTH
AOS .OARGC(MO) ;BUMP ARGUMENT COUNT
ADD P3,S2 ;BUMP TO NEXT FREE LOCATION
$RETT ;O.K...RETURN TRUE
SUBTTL CMDEND -- FINISH COMMAND MESSAGE AND SEND IT
;THIS ROUTINE WILL CHECK FOR END OF COMMAND AND IF O.K
;PREPARE MESSAGE TO BE SENT TO QUASAR
CMDEND: PUSHJ P,P$CFM ;CHECK FOR CONFIRM
JUMPF .POPJ ;NO..INVALID MESSAGE
ANDI P3,777 ;GET MESSAGE LENGTH
STORE P3,.MSTYP(MO),MS.CNT ;SAVE MESSAGE SIZE IN MESSAGE
PJRST SNDQSR ;SEND THE MESSAGE TO QUASAR
SUBTTL BLDOBJ -- BUILD AN OBJECT BLOCK
SUBTTL FINOBJ -- FINISH OBJECT BLOCK AFTER TYPE FIELD
;THIS ROUTINE WILL BUILD AN OBJECT BLOCK FOR A MESSAGE TO AN
;OBJECT PROCESSOR AND PLACE IT IN THE MESSAGE POINTED TO BY
;MO
BLDOBJ: PUSHJ P,P$KEYW ;GET A KEYWORD
JUMPF .POPJ ;NOT A KEYWORD..INVALID..RETURN
CAILE S1,.OTMAX ;LESS THAN OR EQUAL VALID OBJECT
JRST BLDO.6 ;INVALID TYPE..RETURN
CAIE S1,.OTBAT ;WAS IT A BATCH BLOCK
JRST BLDO.1 ;NO..IGNORE CHECK
MOVE P1,S1 ;SAVE THE NUMBER
PUSHJ P,CHKWHL ;CHECK FOR WHEEL OR OPERATOR
JUMPF E$BNR ;BATCH COMMANDS MUST BE LOCAL
MOVE S1,P1 ;GET THE TYPE BACK
BLDO.1: STORE S1,ARG.DA+OBJ.TY(P3) ;SAVE THE TYPE
FINOBJ: SETZM ARG.DA+OBJ.UN(P3) ;ZERO THE UNIT NUMBER FIELDS
PUSHJ P,P$NUM ;GET A NUMBER
JUMPF .POPJ ;RETURN FALSE..PASSING RETURN UP
STORE S1,ARG.DA+OBJ.UN(P3),OU.LRG ;SAVE AS LOW RANGE
MOVE P1,S1 ;SAVE THE LOW RANGE
PUSHJ P,P$TOK ;CHECK FOR TOKEN AND RANGE
JUMPF BLDO.2 ;NO..CHECK FOR NODE
;IGNORE TOKEN
PUSHJ P,P$NUM ;GET THE OTHER NUMBER
JUMPF .POPJ ;INVALID FIELD..NUMBER NEEDED
CAML P1,S1 ;CHECK FOR VALID RANGE
PJRST E$IRS ;UNITS OUT OF RANGE
STORE S1,ARG.DA+OBJ.UN(P3),OU.HRG ;SAVE THE HIGH RANGE
BLDO.2: ZERO ARG.DA+OBJ.ND(P3) ;INITIALIZE NODE FIELD
PUSHJ P,P$SWIT ;GET A SWITCH
JUMPF BLDO.4 ;NOT A SWITCH,,CHECK CONFIRM
CAIE S1,.SWNOD ;WAS IT A NODE
JRST BLDO.3 ;NO..SETUP NODE VALUE IN BLOCK
PUSHJ P,P$NODE ;GET THE NODE
JUMPF BLDO.3 ;GET NODE FROM NODE ENTRY
MOVE P1,S1 ;SAVE THE NODE DATA
PUSHJ P,OPRENB ;CHECK IF OPERATOR ENABLED FOR NODE
JUMPF .POPJ ;NO..RETURN..NOT A VALID NODE
PJRST BLDO.5 ;SAVE NODE AND RETURN
BLDO.3: PUSHJ P,P$PREV ;POSITION TO THE PREVIOUS ONE
;ON INPUT
BLDO.4: MOVE T1,G$OPRA ;GET OPERATOR ENTRY ADDRESS
MOVE T1,OPR.ND(T1) ;GET NODE ADDRESS
MOVE P1,NOD.NX(T1) ;GET NODE NAME ON -20
BLDO.5: STORE P1,ARG.DA+OBJ.ND(P3) ;SAVE THE NODE NAME
MOVX S1,.OROBJ ;TYPE OF DATA ELEMENT..OBJ BLOCK
MOVX S2,.OBJLN ;SIZE OF THE BLOCK
PJRST ARGRTN ;SETUP HEADER,COUNT, POINTER..RETT
BLDO.6: PUSHJ P,P$PREV ;POSITION TO THE PREVIOUS ONE
$RETF ;RETURN FALSE
SUBTTL FORWARDSPACE/BACKSPACE Commands
Q$FSPACE::
Q$BSPACE:: PUSHJ P,LPTOBJ ;LINE PRINTER OBJECT SETUP
JUMPF .POPJ ;ERROR..RETURN
PUSHJ P,P$SWIT ;GET A SWITCH
JUMPF .RETF ;ILLEGALLY FORMATTED COMMAND
MOVEI S2,FSPDSP ;GET TABLE ADDRESS
PUSHJ P,TABSRC ;GET THE VALUE
JUMPF .POPJ ;ERROR..RETURN
MOVE T2,S2 ;PLACE TYPE IN T2
PUSHJ P,P$NUM ;GET A NUMBER
JUMPF [CAIE T2,.SPFIL ;Was it /FILE?
POPJ P, ;No..return the failure
MOVEI S1,1 ;Yes..argument is 1 file
JRST .+1] ;Continue..
STORE S1,ARG.DA(P3) ;SAVE DATA IN MESSAGE
MOVE S1,T2 ;GET TYPE IN S1
MOVEI S2,ARG.SZ ;SIZE OF THE BLOCK
PUSHJ P,ARGRTN ;ARG HEADER,COUNT ROUTINE
PJRST CMDEND ;CHECK FOR END AND SEND MESSAGE
FSPDSP: $STAB
.SWPAG,,.SPPAG ;PAGES
.SWFIL,,.SPFIL ;FILES
.SWCPY,,.SPCPY ;COPIES
$ETAB
SUBTTL LPTOBJ -- LINE PRINTER OBJECT SETUP
;THIS ROUTINE WILL SETUP AN OBJECT BLOCK AND MAKE SURE
;THAT IT IS FOR A LINE PRINTER WITH ONLY ONE UNIT SPECIFIED.
;THE OBJECT BLOCK WILL BE BUILT IN THE OUTPUT MESSAGE
LPTOBJ: PUSHJ P,BLDOBJ ;AND AN OBJECT BLOCK
JUMPF .POPJ ;ERROR..PASS CODE UP
MOVEI T1,.OHDRS+ARG.DA(MO) ;POINT TO OBJECT BLOCK
LOAD S1,OBJ.UN(T1),OU.HRG ;SEE IF WE HAVE A NON-ZERO HIGH UNIT
JUMPN S1,.RETF ;LOSE IF SO
LOAD S1,OBJ.TY(T1) ;GET MESSAGE TYPE
CAXE S1,.OTLPT ;PRINTER?
$RETF ;NO, LOSE
$RETT ;RETURN TRUE
SUBTTL ALIGN COMMAND
;THIS ROUTINE WILL PROCESS AN ALIGN COMMAND FROM OPR
Q$ALGN:: PUSHJ P,LPTOBJ ;SETUP LINE PRINTER OBJECT BLOCK
JUMPF .POPJ ;ERROR..RETURN
PUSHJ P,P$SWIT ;CHECK FOR A SWITCH
JUMPF ALIG.3 ;NO..CHECK FOR A FILE
CAIE S1,.SWSTP ;WAS IT A STOP
JRST ALIG.2 ;NO..TRY OTHER VALUES
MOVX S1,.ALSTP ;GET THE STOP ARGUMENT TYPE
MOVEI S2,1 ;SETUP FIELD LENGTH
PUSHJ P,ARGRTN ;SETUP ARGUMENT IN MESSAGE
PJRST CMDEND ;FINISH OFF THE COMMAND
ALIG.1: PUSHJ P,P$SWIT ;GET A SWITCH
JUMPF ALIG.3 ;CHECK FOR A FILE
ALIG.2: MOVEI S2,ALIDSP ;GET ALIGN TABLE
PUSHJ P,TABSRC ;CHECK THE TABLE
JUMPF .POPJ ;ERROR..RETURN
MOVE T2,S2 ;SAVE THE VALUE
PUSHJ P,P$NUM ;GET A NUMBER
JUMPF .POPJ ;ERROR..RETURN
STORE S1,ARG.DA(P3) ;SAVE NUMBER IN ARGUMENT BLOCK
MOVEI S2,ARG.SZ ;GET ARGUMENT SIZE
MOVE S1,T2 ;GET FUNCTION TYPE
PUSHJ P,ARGRTN ;SAVE THE ARGUMENT AND UPDATE COUNTERS
JRST ALIG.1 ;CHECK NEXT FIELD
ALIG.3: PUSHJ P,P$IFIL ;CHECK FOR INPUT FILE
JUMPF CMDEND ;NO..CHECK FOR END OF COMMAND
PUSHJ P,MOVARG ;YES..MOVE FD AND HEADER FOR OUTPUT
JRST ALIG.1 ;CHECK THE NEXT FIELD
ALIDSP: $STAB
.SWRPT,,.ALRPT ;REPEAT COUNT
.SWPAU,,.ALPAU ;PAUSE COUNT
$ETAB
SUBTTL SUPPRESS Command
Q$SUPPRE:: PUSHJ P,LPTOBJ ;SETUP LINE PRINTER OBJECT BLOCK
JUMPF .POPJ ;ERROR..RETURN
PUSHJ P,P$SWIT ;CHECK FOR A SWITCH
MOVEI S2,SUPDSP ;ADDRESS OF THE TABLES
SKIPT ;SKIP IF O.K.
MOVEI S1,.SWJOB ;ASSUME JOB AS DEFAULT
PUSHJ P,TABSRC ;SEARCH THE TABLE
JUMPF .POPJ ;ERROR..RETURN
MOVE S1,S2 ;PLACE TYPE IN S1
MOVEI S2,1 ;LENGTH OF ARGUMENT IN S2
PUSHJ P,ARGRTN ;SAVE THE ARGUMENT
PJRST CMDEND ;FINISH THE COMMAND
SUPDSP: $STAB
.SWFIL,,.SUPFL ;FILE
.SWJOB,,.SUPJB ;JOB
.SWSTP,,.SUPST ;STOP
$ETAB
SUBTTL CANCEL -- CANCEL COMMAND PROCESSING
;THIS ROUTINE WILL PROCESS A CANCEL COMMAND AND SEND THE
;APPROPRIATE MESSAGE TO QUASAR
Q$CANCEL:: PUSHJ P,BLDOBJ ;GET AN OBJECT BLOCK SETUP
JUMPF .POPJ ;NO..RETURN..BAD MESSAGE
MOVEI T1,.OHDRS+ARG.DA(MO) ;ADDRESS OF ARGUMENT BLOCK
LOAD S1,OBJ.UN(T1),OU.HRG ;GET HIGH RANGE
JUMPN S1,.RETF ;NON-ZERO..RETURN FALSE
CANC.1: PUSHJ P,P$SWIT ;GET A SWITCH IF ANY
JUMPF CMDEND ;NO..CHECK FOR CONFIRM AND SEND
CAIE S1,.SWREQ ;/REQUEST NUMER SWITCH
JRST CANC.3 ;PROCESS SEQUENCE SWITCH
PUSHJ P,PREQNM ;PROCESS REQUEST NUMBER
JUMPF .POPJ ;ERROR RETURN
CANC.2: PUSHJ P,P$SWIT ;CHECK FOR SWITCH
JUMPF CMDEND ;ERROR..CHECK FOR END
CANC.3: MOVEI S2,CANDSP ;CANCEL TABLE ADDRESS
PUSHJ P,TABSRC ;SEARCH THE TABLE
JUMPT CANC.4 ;O.K..CONTINUE ON
CAIN S1,.SWRSN ;/REASON SWITCH
JRST CANC.5 ;PROCESS REASON SWITCH
$RETF ;INVALID COMMAND
CANC.4: MOVEM S2,ARG.DA(P3) ;SAVE THE DATA FIELD
MOVX S1,.CANTY ;GET CANCEL TYPE
MOVX S2,ARG.SZ ;GET ARGUMENT SIZE
PUSHJ P,ARGRTN ;SETUP ARGUMENT HEADER AND COUNTS
JRST CANC.2 ;GET NEXT FIELD
CANC.5: PUSHJ P,PREASN ;PROCESS THE REASON SWITCH
JUMPF .POPJ ;NO...ERROR..RETURN
PJRST CMDEND ;CHECK FOR COMMAND END AND RETURN
CANDSP: $STAB
.SWPUR,,.CNPRG ;/PURGE
.SWERR,,.CNERR ;/ERROR
.SWNER,,.CNNER ;/NOERROR
$ETAB
SUBTTL PREQNM -- Process /REQUEST ROUTINE
;PROCESS /REQUEST SWITCH
PREQNM: PUSHJ P,P$NUM ;GET A NUMBER
JUMPF .POPJ ;NO..RETURN FALSE
PREQ.1: STORE S1,ARG.DA(P3) ;SAVE THE NAME IN MESSAGE
MOVX S1,.ORREQ ;GET JOBNAME TYPE
MOVX S2,ARG.SZ ;SIZE OF THE ARGUMENT
PJRST ARGRTN ;SETUP ARGUMENT HEADER AND COUNTS
SUBTTL PREASN -- Process /REASON ROUTINE
;PROCESS /REASON TEXT DATA
PREASN: PUSHJ P,P$TEXT ;GET A TEXT ARGUMENT
JUMPF .POPJ ;NO..RETURN
MOVX T1,.ORREA ;GET REASON TYPE
STORE T1,ARG.HD(S1),AR.TYP ;SAVE CORRECT TYPE IN HEADER
PUSHJ P,MOVARG ;BUILD TEXT ARGUMENT AND UPDATE COUNTS
$RETT ;RETURN TRUE
SUBTTL PUSER -- PROCESS USER BLOCK
PUSER: PUSHJ P,P$USER ;GET USER DATA
JUMPF .POPJ ;ERROR..RETURN
MOVEM S1,ARG.DA(P3) ;SAVE THE DATA
MOVX S1,.CMUSR ;GET USER TYPE
MOVX S2,ARG.SZ ;SIZE OF THE ARGUMENT
PJRST ARGRTN ;SAVE THE ARGUMENT
SUBTTL REQUEUE COMMAND PROCESSING
;THIS ROUTINE WILL ANALYSZE A REQUEUE COMMAND AND SEND THE
;APPROPRIATE MESSAGE TO QUASAR
Q$REQUE:: PUSHJ P,BLDOBJ ;SETUP OBJECT BLOCK
JUMPF .POPJ ;ERROR IF NOT SETUP..RETURN
MOVEI T1,.OHDRS+ARG.DA(MO) ;GET THE ARGUMENT BLOCK
LOAD S1,OBJ.UN(T1),OU.HRG ;GET HIGH VALUE
JUMPN S1,.RETF ;RANGE NOT ALLOWED
MOVE P1,OBJ.TY(T1) ;GET THE TYPE FIELD
REQU.1: PUSHJ P,P$SWIT ;GET A SWITCH
JUMPF REQU.5 ;NO..CHECK FOR OTHER FIELDS
CAIE S1,.SWREQ ;CHECK FOR REQUEST
JRST REQU.3 ;YES..PROCESS JOBNAME
PUSHJ P,PREQNM ;PROCESS REQUEST NUMBER
JUMPF .POPJ ;ERROR RETURN
REQU.2: PUSHJ P,P$SWIT ;CHECK FOR SWITCH
JUMPF REQU.5 ;CHECK OTHER FIELDS
REQU.3: CAIN S1,.SWRSN ;CHECK FOR REASON
JRST REQU.4 ;PROCESS REASON SWITCH
$RETF ;INVALID COMMAND..RETURN
REQU.4: PUSHJ P,PREASN ;PROCESS THE REASON FLAG
JUMPF .POPJ ;ERROR..RETURN
JRST REQU.7 ;CHECK FOR A CONFIRM
REQU.5: CAIN P1,.OTBAT ;CHECK FOR BATCH
JRST REQU.7 ;YES..CHECK FOR A CONFIRM
PUSHJ P,P$KEYW ;PRINTER..CHECK FOR KEYWORD
SETOM T1 ;SETUP FLAG FOR SWITCHES
JUMPF REQU.8 ;CHECK FOR END OF MESSAGE
CAIE S1,.KYBEG ;BEGINNING-OF KEYWORD
JRST REQU.6 ;CHECK FOR CURRENT POSITION
PUSHJ P,P$KEYW ;GET BEGINNING OPRION
JUMPF .POPJ ;NOT..KEYWORD..ERROR
CAIN S1,.KYCPY ;IS IT COPY
MOVEI T1,.RQBCP ;BEGINNING OF COPY
CAIN S1,.KYJOB ;IS IT JOB
MOVEI T1,.RQBJB ;BEGINNING OF JOB
CAIN S1,.KYFIL ;IS IT FILE
MOVEI T1,.RQBFL ;BEGINNING OF FILE
REQU.6: CAIN S1,.KYCUR ;CURRENT-POSITION
MOVEI T1,.RQCUR ;CURRENT POSITION
JUMPL T1,.RETF ;INVALID KEYWORD
STORE T1,ARG.DA(P3) ;SAVE VALUE IN MESSAGE
MOVX S1,.REQTY ;KEY ARGUMNET BLOCK TYPE
MOVX S2,ARG.SZ ;GET ARGUMENT SIZE
PUSHJ P,ARGRTN ;SETUP ARGUMENT AND COUNTS
PUSHJ P,P$SWIT ;GET A SWITCH
JUMPF REQU.7 ;CHECK FOR CONFIRM
CAIE S1,.SWRSN ;IS IT REASON
$RETF ;RETURN FALSE
JRST REQU.4 ;PROCESS THE REASON SWITCH
REQU.7: PJRST CMDEND ;FINISH THE COMMAND
REQU.8: CAIE S1,.CMCFM ;CHECK IF AT END OF COMMAND
$RETF ;NO..RETURN FALSE
MOVEI S1,.KYCUR ;SET DEFAULT FOR CURRENT POSITION
JRST REQU.6 ;FINISH COMMAND
SUBTTL ROUTE COMMAND
;THIS ROUTINE WILL SEND A ROUTE MESSAGE TO QUASAR
Q$ROUTE:: PUSHJ P,P$NODE ;GET A NODE FIELD
JUMPF .POPJ ;NOT A NODE..RETURN
MOVEM S1,ARG.DA(P3) ;SAVE THE NODE VALUE
PUSHJ P,OPRENB ;IS OPR ENABLED FOR NODE
JUMPF .POPJ ;NO..RETURN
ROUT.1: PUSHJ P,P$NODE ;GET THE OTHER NODE
JUMPT ROUT.2 ;O.K. CONTINUE ON
PUSHJ P,P$KEYW ;GET A KEYWORD
JUMPF .POPJ ;ERROR RETURN
CAIE S1,.KYTO ;WAS IT TO
$RETF ;NO..BAD COMMAND
JRST ROUT.1 ;TRY NODE NOW
ROUT.2: MOVEM S1,ARG.DA+1(P3) ;SAVE THE NODE
MOVX S1,.ORRTN ;GET THE NODE FUNCTION
MOVX S2,ARG.SZ+1 ;SIZE OF THE BLOCK
PUSHJ P,ARGRTN ;SAVE THE ARGUMENT
PJRST CMDEND ;END THE COMMAND
SUBTTL HOLD AND RELEASE COMMANDS
Q$RELEASE::
Q$HOLD:: PUSHJ P,CHKRMT ;CHECK IF FROM REMOTE AND ADD
;NODE BLOCK IF IS FOR QUASAR VALIDATION
PUSHJ P,P$KEYW ;GET THE KEYWORD
JUMPF .POPJ ;NO..ERROR...RETURN
HOLD.1: PUSHJ P,PQTYPE ;PROCESS QUEUE TYPE
JUMPF .POPJ ;ERROR..RETURN
HOLD.2: PUSHJ P,PREQNM ;PROCESS REQUEST NUMBER
JUMPF HOLD.3 ;ERROR..TRY USER FIELD
PJRST CMDEND ;CHECK FOR THE END
HOLD.3: PUSHJ P,PUSER ;PROCESS USER FIELD
JUMPF HOLD.4 ;CHECK OUT * OR /NODE
PJRST CMDEND ;END THE MESSAGE
HOLD.4: PUSHJ P,P$TOK ;GET A TOKEN
JUMPF .POPJ ;ERROR ..RETURN
SETOM S1 ;YES..ASSUME * -1 FOR REQUEST
PUSHJ P,PREQ.1 ;SAVE ARGUMENT
PUSHJ P,PNODSW ;GET NODE SWITCH
JUMPF .POPJ ;ERROR .. RETURN
PJRST CMDEND ;FINISH OFF COMMAND
SUBTTL PQTYPE -- PROCESS QUEUE TYPE FIELD
;CALLED WITH S1 CONTAINING THE QUEUE TYPE
PQTYPE: MOVEM S1,G$ARG1 ;SAVE THE OBJECT TYPE
SKIPG S1 ;VALID QUEUE TYPE
PJRST E$IOT ;INVALID OBJECT TYPE
CAILE S1,.OTPLT ;WITHIN RANGE
PJRST E$IOT ;NO..INVALID OBJECT TYPE
PQTY.1: MOVEM S1,ARG.DA(P3) ;SAVE THE OBJECT TYPE IN MESSAGE
MOVX S1,.ORTYP ;GET OBJECT TYPE
MOVX S2,ARG.SZ ;GET ARGUMENT SIZE
PJRST ARGRTN ;SAVE ARGUMENT AND RETURN
SUBTTL PNODSW -- PROCESS NODE SWITCH
SUBTTL CNODSW -- VALIDATE THE NODE SWITCH
PNODSW: PUSHJ P,P$SWIT ;CHECK FOR A SWITCH
JUMPF .RETT ;RETURN O.K..CHECK NEXT FIELD
CAIE S1,.SWNOD ;WAS IT A NODE
$RETF ;NO..RETURN FALSE
CNODSW: PUSHJ P,P$NODE ;GET THE NODE FIELD
JUMPF .POPJ ;ERROR..RETURN
MOVE P1,S1 ;SAVE VALUE OF NODE
PUSHJ P,OPRENB ;IS OPR ENABLED FOR NODE
JUMPF .POPJ ;ERROR...RETURN
MOVE S1,P1 ;PLACE IN S1
SAVNOD: MOVEM S1,ARG.DA(P3) ;SAVE THE VALUE
MOVX S1,.ORNOD ;GET THE NODE BLOCK TYPE
MOVX S2,ARG.SZ ;AND BLOCK SIZE
PJRST ARGRTN ;SAVE ARGUMENT AND RETURN
SUBTTL GNODSW -- GET NODE SWITCH IF PRESENT
;THIS ROUTINE WILL GET NODE SWITCH IF PRESENT AND RETURN VALUE
;IN S1 OR RETURN FALSE IF NOT THERE
GNODSW: PUSHJ P,P$SWIT ;CHECK FOR A SWITCH
JUMPF .POPJ ;NOT..RETURN FALSE
CAIE S1,.SWNOD ;WAS IT A NODE
$RETF ;NO..RETURN FALSE
PUSHJ P,P$NODE ;GET THE NODE FIELD
POPJ P, ;RETURN..PASSING CODE OR VALUE
SUBTTL Q$DELETE -- DELETE QUEUE ENTRIES
Q$DELETE:: PUSHJ P,CHKRMT ;CHECK IF FROM REMOTE AND ADD
;NODE BLOCK IF IS FOR QUASAR VALIDATION
PUSHJ P,P$KEYW ;GET THE QUEUE TYPE
JUMPF .POPJ ;ERROR...RETURN
CAIN S1,.KYMNT ;WAS IT A MOUNT REQUEST
JRST DELE.1 ;PROCESS DELETE OF MOUNT REQUESTS
SETZM P1 ;SET FLAG FOR ALL DATA
PJRST HOLD.1 ;FINISH OFF COMMAND
DELE.1: MOVX S1,.OTDMT ;SET DELETE MOUNT REQUEST TYPE
STORE S1,.MSTYP(MO),MS.TYP ;SAVE THE TYPE IN HEADER
PUSHJ P,PREQNM ;WAS IT A REQUEST NUMBER
JUMPT DELE.2 ;PROCESS THE REASON IF PRESENT
PUSHJ P,PSTRUC ;GET THE STRUCTURE NAME
JUMPF .POPJ ;ERROR..RETURN..BAD COMMAND
DELE.2: PUSHJ P,P$SWIT ;WAS THERE A SWITCH
JUMPF CMDEND ;NO..CHECK END OF COMMAND
CAIE S1,.SWRSN ;WAS IT /REASON: ??
$RETF ;NO..RETURN FALSE
PUSHJ P,PREASN ;PROCESS THE REASON
JUMPT CMDEND ;O.K FINISH OFF MESSAGE
POPJ P, ;OTHERWISE PASS ERROR BACK
SUBTTL CHKRMT -- CHECK FOR REMOTE NODE INPUT
;THIS ROUTINE WILL CHECK IF FROM REMOTE SITE AND ADD A .CMNOD
;BLOCK IF IS SO QUASAR AND VALIDATE REQUEST
CHKRMT: PUSHJ P,CHKWHL ;WAS THE USER PRIVILEGED
JUMPT .POPJ ;YES..O.K.
MOVE S1,G$OPRA ;GET OPERATOR ADDRESS
MOVE S2,OPR.ND(S1) ;GET NODE ENTRY ADDRESS
MOVE S1,NOD.NX(S2) ;GET THE NAME
PJRST SAVNOD ;SAVE A NODE
SUBTTL Q$MODIFY -- Modify Queue Entry Command
;THIS COMMAND WILL MODIFY AN ENTRY IN QUASARS QUEUES
Q$MODIFY:: PUSHJ P,CHKRMT ;CHECK IF FROM REMOTE AND ADD
;NODE BLOCK IF IS FOR QUASAR VALIDATION
PUSHJ P,P$KEYW ;GET A KEYWORD
JUMPF .POPJ ;ERROR..RETURN
PUSHJ P,PQTYPE ;PROCESS QUEUE TYPE
JUMPF .POPJ ;NOT..ERROR..RETURN
PUSHJ P,PREQNM ;PROCESS REQUEST NUMBER
JUMPT MODI.1 ;O.K. PROCESS MODIFY OPTION
PUSHJ P,PUSER ;TRY USER FIELD
JUMPT MODI.1 ;O.K.. PROCESS THE FIELDS
PUSHJ P,P$TOK ;WAS THERE A TOKEN
JUMPF .POPJ ;NO..ERROR..RETURN
SETOM S1 ;SET FOR ALL REQUESTS
PUSHJ P,PREQ.1 ;SAVE REQUEST NUMBER
PUSHJ P,PNODSW ;WAS THERE A NODE SWITCH
JUMPF .POPJ ;ERROR..RETURN
MODI.1: PUSHJ P,P$KEYW ;PROCESS A KEYWORD
JUMPF .POPJ ;BAD COMMAND
CAIE S1,.KYPRI ;IS IT PRIORITY
$RETF ;BAD COMMAND
PUSHJ P,P$NUM ;GET THE NUMBER
JUMPF .POPJ ;ERROR..RETURN
MOVEM S1,ARG.DA(P3) ;SAVE THE VALUE
MOVX S1,.MOPRI ;GET BLOCK TYPE
MOVX S2,ARG.SZ ;BLOCK SIZE
PUSHJ P,ARGRTN ;SAVE THE ARGUMENT
PJRST CMDEND ;FINISH OFF COMMAND
SUBTTL SET -- PROCESS THE SET COMMAND
;THIS ROUTINE WILL SEND THE APPROPRIATE SET MESSAGE TO
;QUASAR FOR PRINTERS, BATCH-STREAMS, AND PRIORITY. ALL OTHER
;SET TYPES WILL BE PROCESSED BY ORION
Q$SET:: PUSHJ P,P$KEYW ;GET A KEYWORD
JUMPF .POPJ ;ILLEGALLY FORMATTED COMMAND
MOVSI S2,-SETTX1 ;PREPARE AOBJN POINTER
SET.1: HLRZ T1,SETDSP(S2)
CAME T1,S1 ;MATCH?
AOBJN S2,SET.1 ;CHECK THE REST IF ANY
JUMPGE S2,.RETF ;LOSE!
MOVE P2,SETDSP(S2) ;SAVE ENTRY DATA
MOVEI T1,SETDSP(S2) ;ADDRESS OF THE ENTRY
CAILE T1,SETOBJ ;SET FOR BAT OR LPT
JRST SET.3 ;NO..GO PROCESS
PUSHJ P,P$PREV ;POSITION TO PREVIOUS BLOCK
PUSHJ P,BLDOBJ ;GET THE OBJECT BLOCK
JUMPF .POPJ ;RETURN
PUSHJ P,P$KEYW ;GET THE KEYWORD FOR SET
JUMPF .POPJ ;RETURN
HRRZ S2,P2 ;GET THE PROPER TABLE ADDRESS
MOVE S2,(S2) ;GET DISPATCH POINTER
SET.2: HLRZ T1,(S2) ;GET THE FIELD TO CHECK
CAME T1,S1 ;CHECK FOR MATCH??
AOBJN S2,SET.2 ;NO..KEEP CHECKING
JUMPGE S2,.RETF ;NO MATCH..FAILED
HRRZ T1,(S2) ;GET ADDRESS OF HEADER
HLRZ T2,(T1) ;PLACE ADDRESS IN T1
MOVE T2,(T2) ;GET HEADER IN T1
MOVEM T2,ARG.HD(P3) ;SAVE THE ENTRY
SET.3: HRRZ S2,(T1) ;GET THE ROUTINE ADDRESS
JRST (S2) ;GO TO PROPER ROUTINE
;SET COMMAND DISPATCH TABLE
SETDSP: XWD .KYBAT,[-BATCNT,,BATDSP] ;BATCH
XWD .KYLPT,[-LPTCNT,,LPTDSP] ;LPT
XWD .KYCDP,[-CDPCNT,,CDPDSP] ;CDP
XWD .KYPTP,[-PTPCNT,,PTPDSP] ;PAPAR-TAPE-PUNCH
SETOBJ: XWD .KYPLT,[-PLTCNT,,PLTDSP] ;PLT
XWD .KYJOB,SETJOB ;PROCESS JOB SETTING OPTIONS
XWD .KYTAP,SETTAP ;SET TAPE COMMAND
IFN FTJSYS,<
XWD .KYSCH,SETSCH ;SET BIAS COMMAND
XWD .KYDSK,SETDSK ;SET DISK COMMAND
XWD .KYSTR,SETSTR ;SET STRUCTURE COMMAND
XWD .KYONL,SETONL ;SET ONLINE COMMAND
>;END FTJSYS
IFN FTDN60,<
XWD .KYNOD,SETNOD ;SET NODE COMMAND
>;END FTDN60
SETTX1==.-SETDSP
;BATCH DISPATCH TABLE
BATDSP: XWD .KYMEM,[[ARG.SZ+1,,.STMEM],,SETMEM] ;MEMORY LIMITS
XWD .KYPRL,[[ARG.SZ+1,,.STPRI],,SETPRI] ;PRIORITY-LIMITS
XWD .KYNOI,[[1,,.STNOI],,SETNOI] ;NOOPR-INTERVENTION
XWD .KYOIA,[[1,,.STOIA],,SETOIA] ;OPR-INTERVENTION
XWD .KYTIM,[[ARG.SZ+1,,.STTIM],,SETTIM] ;SET TIME LIMITS
BATCNT==.-BATDSP
;LINE PRINTER DISPATCH TABLE
LPTDSP: XWD .KYFOT,[[ARG.SZ,,.STFRM],,SETFRM] ;FORMS-TYPE
XWD .KYLEA,[[ARG.SZ,,.STLEA],,SETLEA] ;LIMIT-EXCEED-ACTION
XWD .KYPGL,[[ARG.SZ+1,,.STPGL],,SETPGL] ;PAGE-LIMITS
XWD .KYPRL,[[ARG.SZ+1,,.STPRI],,SETPRI] ;PRIORITY-LIMITS
LPTCNT==.-LPTDSP
PLTDSP:
CDPDSP:
PTPDSP: XWD .KYFOT,[[ARG.SZ,,.STFRM],,SETFRM] ;FORMS-TYPE
XWD .KYLEA,[[ARG.SZ,,.STLEA],,SETLEA] ;LIMIT-EXCEED-ACTION
XWD .KYOPL,[[ARG.SZ+1,,.STOPL],,SETOPL] ;OUTPUT-LIMITS
XWD .KYPRL,[[ARG.SZ+1,,.STPRI],,SETPRI] ;PRIORITY-LIMITS
CDPCNT==.-CDPDSP
PTPCNT==.-PTPDSP
PLTCNT=.-PLTDSP
SUBTTL SETJOB -- SET OPERATOR VALUES FOR A JOB
SETJOB: PUSHJ P,CHKWHL ;IS THE PROCESS ENABLED
JUMPF E$IPE ;INSUFFICIENT PRIVILEGES
PUSHJ P,P$NUM ;GET A NUMBER
JUMPF .POPJ ;NO..ERROR..RETURN
MOVE P1,S1 ;SAVE NUMBER IN P1
MOVEM P1,G$ARG1 ;SAVE THE JOB NUMBER
PUSHJ P,P$KEYW ;GET THE SETTING KEYWORD
JUMPF .POPJ ;ERROR...RETURN
MOVE P2,S1 ;SAVE KEYWORD IN P2
PUSHJ P,P$CFM ;COMMAND HAVE CONFIRM?
JUMPF SETJ.1 ;TRY CLASS SETTING
SETO T2, ;SET A FLAG
CAIN P2,.KYNOI ;WAS IT NO OPERATOR INTERVENTION
MOVEI T2,.OBNWR ;SET NO OPR INTERVENTION
CAIN P2,.KYOIA ;OPR INTERVENTION ALLOWED
MOVEI T2,.OBALL ;YES SET OPR INTERVENTION ALLOWED
JUMPL T2,.RETF ;INVALID FIELD..RETURN
IFN FTUUOS,<
MOVE S2,P1 ;PLACE JOB NUMBER IN S2
MOVE S1,[2,,S2] ;SET UP THE BLOCK
HRLI T1,.STWTO ;SET WTO INFO FUNCTION
HRR T1,T2 ;PLACE VALUE IN T1
JBSET. S1, ;PERFORM THE FUNCTION
PJRST E$SJN ;SET JOB NOT IMPLEMENTED
>;END FTUUOS
IFN FTJSYS,<
MOVE S1,P1 ;GET THE JOB NUMBER
MOVX S2,.SJBAT ;UPDATE BATCH DATA
SETZ T1, ;CLEAR THE DATA WORD
STORE T2,T1,OB%WTO ;SAVE THE DATA
SETJB ;SET THE INFO
ERJMP E$SJN ;NOTE THE ERROR
>;END FTJSYS
PJRST E$SJM ;SET JOB MODIFIED
TOPS10 <
SETJ.1: $RETF ;ILLEGAL COMMAND
>;END TOPS10
TOPS20 <
SETJ.1: CAIE P2,.KYCLS ;WAS IT CLASS?
$RETF ;NO..INVALID COMMAND
PUSHJ P,P$NUM ;GET THE CLASS VALUE
JUMPF .POPJ ;ERROR..RETURN
MOVE T3,S1 ;PLACE CLASS IN BLOCK
MOVEM T3,G$ARG2 ;SAVE THE CLASS
MOVEI S1,.SKSCJ ;GET THE FUNCTION
MOVEI S2,T1 ;BLOCK IN T1
MOVEI T1,3 ;SIZE OF BLOCK
MOVE T2,P1 ;GET THE JOB NUMBER
SKED% ;DO THE FUNCTION
ERJMP SETJ.2 ;TRAP ERROR
PJRST E$SSJ ;SET SCHEDULER JOB O.K.
SETJ.2: MOVE S1,[EXP -2] ;GET LAST -20 ERROR
MOVEM S1,G$ARG1 ;SAVE THE VALUE
PJRST E$SJF ;SET FAILED..RETURN
>;END TOPS20
SUBTTL SETPGL,SETFRM,SETLEA,SETOPL
SUBTTL SETMEM,SETPRI,SETTIM AND OPERATOR ACTION
SETTIM:
SETPGL:
SETOPL:
SETMEM: PUSHJ P,P$RNGE ;GET RANGE
JUMPF .POPJ ;ERROR..RETURN
SETM.1: DMOVEM S1,ARG.DA(P3) ;SAVE VALUES IN MESSAGE
ADDI P3,ARG.SZ+1 ;BUMP TO NEXT FREE LOCATION
AOS .OARGC(MO) ;BUMP THE ARGUMENT COUNT
PJRST CMDEND ;FINISH OFF COMMAND
SETPRI: PUSHJ P,P$RNGE ;GET RANGE
JUMPF .POPJ ;ERROR..RETURN
MOVEM S2,G$ARG1 ;SAVE THE VALUE
CAILE S2,^D63 ;IS IT IN RANGE
PJRST E$SPI ;INVALID PRIORITY SPECIFIED
JRST SETM.1 ;FINISH OFF COMMAND
SETNOI:
SETOIA: ADDI P3,1 ;BUMP TO NEXT LOCATION
AOS .OARGC(MO) ;BUMP THE ARGUMENT COUNT
PJRST CMDEND ;FINISH OFF COMMAND
;HERE TO SET PRINTER PARAMETERS
SETFRM: PUSHJ P,P$SIXF ;GET A 6 BIT FIELD TYPE
JUMPF .POPJ ;ERROR..RETURN
MOVEM S1,ARG.DA(P3) ;SAVE FORMS NAME IN MESSAGE
ADDI P3,ARG.SZ ;BUMP TO NEXT LOCATION
AOS .OARGC(MO) ;BUMP THE ARGUMENT COUNT
PJRST CMDEND ;END THE COMMAND
;HERE TO HANDLE LIMIT-EXCEEDED-ACTION VERB
SETLEA: PUSHJ P,P$KEYW ;GET A KEYWORD
JUMPF .POPJ ;ERROR..RETURN
MOVEI S2,LEADSP ;GET LIMIT-EXCEED ACTION TABLE
PUSHJ P,TABSRC ;SEARCH THE TABLE
JUMPF .POPJ ;ERROR..RETURN
MOVEM S2,ARG.DA(P3) ;SAVE IN THE MESSAGE
ADDI P3,ARG.SZ ;BUMP THE POINTER
AOS .OARGC(MO) ;BUMP THE ARGUMENT COUNT
PJRST CMDEND ;FINISH OFF COMMAND
LEADSP: $STAB
.KYCNC,,.STCAN ;CANCEL IT
.KYASK,,.STASK ;ASK
.KYIGN,,.STIGN ;IGNORE IT
$ETAB
SUBTTL SETONL -- SET ONLINE COMMAND FOR THE -20
;THIS COMMAND IS TO INFORM SYSTEM OF A DEVICE THAT HAS BECOME
;AVAILABLE.
IFN FTJSYS,<
SETONL: PUSHJ P,CHKWHL ;PROGRAM WHEEL OR OPERATOR
JUMPF E$IPE ;INSUFFIECIENT PRIVILEGES
MOVE P3,MO ;GET OUTPUT POINTER
MOVEI S1,[ASCIZ//] ;NULL TEXT
MOVEM S1,G$ARG1 ;SAVE THE ARGUMENT
SETOM T4 ;SET THE FLAG
SETO.1: PUSHJ P,P$NUM ;GET A NUMBER
JUMPF .POPJ ;BAD COMMAND
MOVEM S1,G$ARG2 ;SAVE THE ARGUMENT
SKIPGE S1 ;IS IT O.K.
PJRST E$SIC ;INVALID CHANNEL
CAILE S1,7 ;IS IT IN RANGE
PJRST E$SIC ;SET INVALID CHANNEL
AOS P3 ;BUMP THE FIELD
MOVEM S1,(P3) ;SAVE THE DATA
PUSHJ P,P$COMMA ;CHECK FOR A COMMA
JUMPF .POPJ ;ERROR..RETURN
PUSHJ P,P$NUM ;GET THE DEVICE NUMBER
JUMPF .POPJ ;ERROR..RETURN
MOVEM S1,G$ARG2 ;SAVE DEVICE NUMBER
SKIPGE S1 ;IS IT VALID?
PJRST E$SID ;INVALID DEVICE
AOS P3 ;BUMP POINTER
MOVEM S1,(P3) ;SAVE THE VALUE
PUSHJ P,P$CFM ;CHECK IF DONE
JUMPF SETO.2 ;TRY FOR COMMA
AOS P3 ;BUMP FIELD
SETOM (P3) ;NO CONTROLLER -1 USED
PJRST SETO.3 ;FINISH OFF COMMAND
SETO.2: PUSHJ P,P$COMMA ;WAS IT A COMMA?
JUMPF .POPJ ;BAD COMMAND
PUSHJ P,P$NUM ;GET CONTROLLER IF PRESENT
JUMPF .POPJ ;NO..ERROR..RETURN
MOVEM S1,G$ARG2 ;SAVE THE VALUE
;JSYS WILL VERIFY
AOS P3 ;BUMP POINTER
MOVEM S1,(P3) ;SAVE THE VALUE
PUSHJ P,P$CFM ;CONFIRMED??
JUMPT SETO.3 ;PROCESS IT
AOSE T4 ;CHECK FLAG
$RETF ;INVALID COMMAND
MOVEI S1,[ASCIZ/Alternate /] ;GET ALTERNATE
MOVEM S1,G$ARG1 ;SAVE THE VALUE
JRST SETO.1 ;GET ALTERNATE DATA
SETO.3: MOVX S1,.DGPDL ;GET FUNCTION CODE
MOVEM S1,(MO) ;SAVE IN BLOCK
HRRZ S1,MO ;ADDRESS IN RIGHT HALF
SUBI P3,-1(MO) ;GET LENGTH OF BLOCK
MOVN P3,P3 ;MAKE IT NEGATIVE
HRL S1,P3 ;PUT LENGTH IN LEFT HALF
DIAG ;DO THE JSYS
PJRST SETO.4 ;ERROR..CHECK IT OUT
PJRST E$SOA ;SET ONLINE ACCEPTED.. RELEASE THE PAGE
SETO.4: MOVEM S1,G$ARG1 ;SAVE THE ERROR CODE
PJRST E$DJF ;DIAG JSYS FAILED
>;END FTJSYS
SUBTTL SETSCH -- SET SCHEDULER FOR THE -20
;THIS COMMAND WILL DO THE SKED% JSYS TO AFFECT THE SCHEDULER CONTROLS
;AND INFORM OPERATOR OF THE ACTION
IFN FTJSYS,<
SETSCH: PUSHJ P,CHKWHL ;PROGRAM WHEEL OR OPERATOR
JUMPF E$IPE ;INSUFFIECIENT PRIVILEGES
PUSHJ P,P$KEYW ;GET A KEYWORD
JUMPF .POPJ ;ERROR..RETURN
MOVEI S2,SCHDSP ;SCHEDULER DISPATCH TABLE
PUSHJ P,TABSRC ;SEARCH THE TABLE
JUMPF .POPJ ;ERROR..RETURN
HLRZ P1,(S2) ;GET THE FUNCTION CODE
HRRZ S2,(S2) ;GET THE ROUTINE ADDRESS
PJRST (S2) ;PROCESS THE ROUTINE AND RETURN
SCHBIA: PUSHJ P,P$NUM ;GET THE NUMBER
JUMPF .POPJ ;ERROR..RETURN
MOVEI T1,2 ;BLOCK OF 2 WORDS
MOVE T2,S1 ;GET THE NUMBER
PJRST SCHED ;DO THE FUCNTION AND RETURN
SUBTTL SCHED -- SCHEDULE JSYS FOR THE -20
;THIS ROUTINE WILL DO THE SCHEDULE FUNCTION WITH P1 CONTAINING THE
;FUNCTION CODE
SCHED: MOVEI T1,2 ;MINIMUM SIZE BLOCK
SCHED1: MOVE S1,P1 ;GET THE FUNCTION
MOVEI S2,T1 ;ADDRESS OF THE BLOCK
SKED% ;DO THE JSYS
ERJMP SCHED2 ;SHOW ERROR
PJRST E$SSS ;BIAS SET ..RETURN AND RELEASE PAGE
SCHED2: MOVE S2,[EXP -2] ;LAST -20 ERROR CODE
MOVEM S2,G$ARG1 ;SAVE THE CODE
PJRST E$SSF ;SET BIAS FAILED
SCHDSP: $STAB
.KYBAT,,[.SKBCS,,SCHBAT] ;SET SCHED BATCH
.KYBIA,,[.SKSBC,,SCHBIA] ;SET SCHED BIAS
.KYCLS,,[.SKSCS,,SCHCLS] ;SET SCHED CLASS
$ETAB
>;END FTJSYS
SUBTTL SCHSCH -- (Continued)
IFN FTJSYS,<
SCHBAT: PUSHJ P,P$NUM ;GET THE BATCH CLASS
JUMPF SCHB.1 ;TRY KEYWORDS
MOVE T2,S1 ;GET THE CLASS NUMBER
PJRST SCHED ;DO THE SCHED JSYS
SCHB.1: PUSHJ P,P$KEYW ;IS IT A KEYWORD?
JUMPF .POPJ ;ERROR..RETURN
CAIE S1,.KYNON ;NONE?
JRST SCHB.2 ;TRY BACKGROUND
SETOM T2 ;NON-ZERO VALUE
PUSHJ P,SCHED ;DO THE FUNCTION
MOVEI P1,.SKBBG ;CLEAR DREGS SETTING ALSO
SETZM T2 ;CLEAR THE VALUE
PJRST SCHED ;DO THE FUNCTION AND RETURN
SCHB.2: CAIE S1,.KYBCK ;WAS IT BACKGROUND
$RETF ;NO..RETURN FALSE
MOVEI P1,.SKBBG ;SET BACKGROUND
SETOM T2 ;NON-ZERO..BACKGROUND
PJRST SCHED ;DO THE FUNCTION
>;END FTJSYS
SUBTTL SCHCLS -- SCHEDULER CLASS SETTING
IFN FTJSYS,<
SCHCLS: PUSHJ P,P$NUM ;GET THE CLASS NUMBER
JUMPF .POPJ ;ERROR..RETURN
MOVE T2,S1 ;SAVE THE VALUE
PUSHJ P,P$NUM ;GET THE PERCENT
JUMPF .POPJ ;ERROR..RETURN
FLTR S1,S1 ;FLOAT THE NUMBER
FDVRI S1,(100.) ;CONVERT TO NUMBER FROM PERCENT
MOVE T3,S1 ;SAVE THE SHARE
MOVEI T1,3 ;GET THE LENGTH
PJRST SCHED1 ;DO THE FUNCTION
>;END FTJSYS
SUBTTL SETNOD -- SET NODE COMMAND FOR DN60
;THIS COMMAND WILL PASS A PARTICULAR VALUE FOR A DN60 OPTION
IFN FTDN60,<
SETNOD: PUSHJ P,CHKWHL ;PROGRAM WHEEL OR OPERATOR
JUMPF E$IPE ;INSUFFIECIENT PRIVILEGES
PUSHJ P,P$NODE ;BETTER HAVE NODE VALUE
JUMPF .POPJ ;ERROR..RETURN
PUSHJ P,SAVNOD ;SAVE THE NODE
PUSHJ P,P$KEYW ;CHECK FOR A KEYWORD
JUMPF .POPJ ;ERROR..RETURN
MOVEI S2,SETNDP ;GET TABLE ADDRESS
PUSHJ P,TABSRC ;SEARCH THE TABLE
JUMPF .POPJ ;ERROR..RETURN
HLRZ P1,(S2) ;GET BLOCK VALUE IN P1
HRRZ S2,(S2) ;GET ROUTINE ADDRESS
PJRST (S2) ;PROCESS FUNCTION AND RETURN
SETNDP: $STAB
XWD .KYBPM,[.STBPM,,SETBPM] ;BYTES PER MESSAGE
XWD .KYCSD,[.STCSD,,SETCSD] ;CLEAR-SEND-DELAY
XWD .KYDTR,[.STDTR,,SETDTR] ;DATA TERMINAL READY
XWD .KYRPM,[.STRPM,,SETRPM] ;RECORDS PER MESSAGE
XWD .KYSWL,[.STSWL,,SETSWL] ;SILO WARNING LEVEL
XWD .KYTOU,[.STTOU,,SETTOU] ;TIMEOUT CATEGORY
XWD .KYTRA,[.STTRA,,SETTRA] ;TRANSPARANCY
XWD .KYSON,[.STSON,,SETSON] ;SIGNON-REQUIRED
XWD .KYNSN,[.STNSN,,SETNSN] ;NO-SIGNON-REQUIRED
$ETAB
;ALL ROUTINES CALLED WITH FUNCTION CODE IN P1
;SET CLEAR TO SEND DELAY
SETBPM:
SETRPM:
SETSWL:
SETCSD: PUSHJ P,P$NUM ;GET THE VALUE
JUMPF .POPJ ;ERROR..RETURN
MOVEM S1,ARG.DA(P3) ;SAVE THE DATA
SETFIN: MOVE S1,P1 ;GET THE BLOCK TYPE
MOVX S2,ARG.SZ ;BLOCK SIZE
PUSHJ P,ARGRTN ;SAVE THE ARGUMENT
PJRST CMDEND ;FINISH AND SEND COMMAND
SETTRA:
SETDTR: PUSHJ P,P$KEYW ;GET THE KEYWORD
JUMPF .POPJ ;ERROR..RETURN
SETZ T1, ;SET A FLAG
CAIN S1,.KYON ;WAS IT ON
MOVX T1,ST.ON ;SET ON
CAIN S1,.KYOFF ;WAS IT OFF
MOVX T1,ST.OFF ;SET OFF
JUMPE T1,.RETF ;NONE..ERROR..RETURN
MOVEM T1,ARG.DA(P3) ;SAVE THE VALUE
PJRST SETFIN ;FINISH SET COMMAND
SETTOU: PUSHJ P,P$KEYW ;GET THE KEYWORD
JUMPF .POPJ ;ERROR..RETURN
SETZ T1, ;SET A FLAG
CAIN S1,.KYPRI ;WAS IT PRIMARY
MOVX T1,ST.PRI ;SET PRIMARY
CAIN S1,.KYSEC ;WAS IT SECONDARY
MOVX T1,ST.SEC ;SET SECONDARY
JUMPE T1,.RETF ;NONE..ERROR..RETURN
MOVEM T1,ARG.DA(P3) ;SAVE THE VALUE
PJRST SETFIN ;FINISH THE COMMAND
SETSON:
SETNSN: MOVE S1,P1 ;GET THE FUNCTION CODE
MOVEI S2,1 ;GET THE BLOCK SIZE
PUSHJ P,ARGRTN ;SAVE THE ARGUMENT
PJRST CMDEND ;FINISH AND SEND COMMAND
>;END FTDN60
SUBTTL SETDSK -- SET DISK COMMAND FOR -20
IFN FTJSYS,<
SETDSK: PUSHJ P,CHKWHL ;PROGRAM WHEEL OR OPERATOR
JUMPF E$IPE ;INSUFFIECIENT PRIVILEGES
MOVX S1,.OTSDK ;SET DISK COMMAND FOR -20
STORE S1,.MSTYP(MO),MS.TYP ;SAVE THE TYPE IN HEADER
PUSHJ P,P$KEYW ;GET A KEYWORD
JUMPF .POPJ ;ERROR..RETURN
CAIE S1,.KYCHN ;WAS IT A CHANNEL
$RETF ;NO..RETURN
PUSHJ P,P$NUM ;GET THE NUMBER
JUMPF .POPJ ;NO..ERROR
MOVEM S1,ARG.DA(P3) ;SAVE CHANNEL NUMBER
MOVEM S1,G$ARG1 ;SAVE NUMBER FOR POSSIBLE ERROR
SKIPGE S1 ;VALID CHANNEL NUMBER
PJRST E$ICN ;INVALID CHANNEL NUMBER
PUSHJ P,P$KEYW ;GET NEXT ITEM
JUMPF .POPJ ;BETTER BE DRIVE NUMBER
CAIE S1,.KYDRV ;IS IT?
$RETF ;NO..RETURN FALSE
PUSHJ P,P$NUM ;GET DRIVE NUMBER
JUMPF .POPJ ;NO..ERROR..RETURN
MOVEM S1,ARG.DA+1(P3) ;SAVE THE DRIVE NUMBER IN BLOCK
MOVEM S1,G$ARG1 ;SAVE NUMBER IN CASE OF ERROR
SKIPGE S1 ;IS IT VALID
PJRST E$DDI ;DISK DRIVE INVALID
MOVX S1,.DSKDV ;DISK DRIVE BLOCK
MOVEI S2,3 ;3 WORDS
PUSHJ P,ARGRTN ;SAVE THE ARGUMENT
PUSHJ P,SETAVL ;GET SET AVALIABLE FUNCTION
JUMPT CMDEND ;END THE COMMAND AND SEND TO QUASAR
POPJ P, ;RETURN PASSING ERROR UP
>;END FTJSYS
SETAVL: PUSHJ P,P$KEYW ;GET A KEYWORD
JUMPF .POPJ ;ERROR..RETURN
SETOM T1 ;FLAG FOR CHECKING VALUES
CAIN S1,.KYAVA ;AVAILABLE?
MOVX T1,.DVAVL ;SET DEVICE AVAILABLE BLOCK
CAIN S1,.KYUAV ;UNAVAILABLE?
MOVX T1,.DVUAV ;SET DEVICE UNAVAILABLE
SKIPGE T1 ;IS ONE SET
$RETF ;NO..ERROR..RETURN
MOVE S1,T1 ;BLOCK TYPE IN 1
MOVEI S2,1 ;BLOCK SIZE OF 1
PUSHJ P,ARGRTN ;SAVE THE BLOCK
CAIE T1,.DVUAV ;UNAVAILABLE??
$RETT ;NO..RETURN TRUE
PUSHJ P,PREASN ;PROCESS THE REASON
POPJ P, ;PASS THE RETURN BACK
SUBTTL SETTAP -- SET TAPE COMMAND FOR -20
SETTAP: PUSHJ P,CHKWHL ;PROGRAM WHEEL OR OPERATOR
JUMPF E$IPE ;INSUFFIECIENT PRIVILEGES
MOVX S1,.OTSTP ;SET TAPE COMMAND FOR -20
STORE S1,.MSTYP(MO),MS.TYP ;SAVE THE TYPE IN HEADER
PUSHJ P,PSTAPE ;PROCESS TAPE DEVICE
JUMPF .POPJ ;ERROR..RETURN
PUSHJ P,SETAVL ;SETUP AVAILABLE,UNAVAILABLE BLOCK
JUMPT CMDEND ;O.K.. FINISH THE COMMAND
PJRST SETINI ;TRY INITIALIZE
SUBTTL PSTAPE -- PROCESS TAPE DRIVE BLOCK
;THIS ROUTINE WILL CHECK FOR A DEVICE AND A TAPE DRIVE AND
;SAVE A .TAPDV BLOCK IN THE MESSAGE
PSTAPE: PUSHJ P,P$DEV ;GET DEVICE BLOCK
JUMPF .POPJ ;RETURN FALSE
PSTA.1: PUSHJ P,GETTAP ;GET A TAPE DEVICE
JUMPF .POPJ ;NO..ERROR..RETURN
MOVX T1,.TAPDV ;TAPE DEVICE BLOCK
STORE T1,ARG.HD(S1),AR.TYP ;SAVE THE TYPE
PJRST MOVARG ;MOVE THE BLOCK AND RETURN
SUBTTL PSTRUC -- PROCESS STRUCTURE BLOCK
;THIS ROUTINE WILL SAVE A STRUCTURE BLOCK IN THE MESSAGE
PSTRUC: PUSHJ P,P$DEV ;GET THE DEVICE
JUMPF .POPJ ;ERROR..RETURN
MOVX T1,.STRDV ;STRUCTURE TYPE
STORE T1,ARG.HD(S1),AR.TYP ;SAVE THE TYPE IN BLOCK
PJRST MOVARG ;MOVE THE BLOCK AND RETURN
SUBTTL PVOLID -- PROCESS VOLUME ID BLOCK
;THIS ROUTINE WILL BUILD A VOLUME ID BLOCK
PVOLID: PUSHJ P,P$QSTR ;CHECK FOR QUOTED STRING
JUMPT PVOL.1 ;YES..PROCESS IT
PUSHJ P,P$FLD ;CHECK FOR FIELD
JUMPF .POPJ ;ERROR..RETURN
PVOL.1: MOVX T1,.VOLID ;VOLUME ID
STORE T1,ARG.HD(S1),AR.TYP ;SAVE THE TYPE
PJRST MOVARG ;MOVE THE BLOCK AND RETURN
SUBTTL SETINI -- SET INITIALIZE COMMAND FOR TAPES
;THIS COMMAND WILL BUILD A MESSAGE FOR THE TAPE PROCESSOR
;CONTAINING THE NECESSAY INFO FOR INITIALIZING TAPES
SETINI: CAIE S1,.KYINI ;WAS IT INITIALIZE
$RETF ;NO..RETURN FALSE
MOVEI S1,.DVINI ;DEVICE INITIALIZE
MOVEI S2,1 ;GET THE TYPE
PUSHJ P,ARGRTN ;SAVE THE ARGUMENT
SETI.1: PUSHJ P,P$SWIT ;GET A SWITCH
JUMPF CMDEND ;END THE COMMAND
MOVEI S2,SETIDP ;ADDRESS OF THE TABLE
PUSHJ P,TABSRC ;SEARCH THE TABLE
JUMPF .POPJ ;PASS ERROR UP
SETI.3: HLRZ P1,(S2) ;GET BLOCK TYPE
HRRZ S2,(S2) ;GET ROUTINE ADDRESS
JRST (S2) ;PROCESS ROUTINE
SETIDP: $STAB
.SWDEN,,[.SIDEN,,SETDEN] ;/DENSITY
.SWLBT,,[.SILBT,,SETLBT] ;/LABEL-TYPE
.SWOVR,,[.SIOVR,,SETOVR] ;/OVERIDE-EXPIRATION
.SWOWN,,[.SIOWN,,SETOWN] ;/OWNER
.SWPRO,,[.SIPRO,,SETPRO] ;/PROTECTION
.SWTDP,,[0,,SETTDP] ;/TAPE-DISPOSITION
.SWCNT,,[.SICNT,,SETCNT] ;/COUNT
.SWINC,,[.SIINC,,SETINC] ;/SET INCREMENT
.SWSVI,,[.SISVI,,SETSVI] ;/STARTING-VOLUME-ID
.SWVID,,[.VOLID,,SETVID] ;/VOLUME-ID
$ETAB
SUBTTL SETDEN -- SET TAPE INIT DENSITY
SETDEN: PUSHJ P,P$KEYW ;GET A KEYWORD
JUMPF .POPJ ;BAD COMMAND
MOVEI S2,DENTAB ;DENSITY TABLE
SETD.1: PUSHJ P,TABSRC ;SEARCH THE TABLE
JUMPF .POPJ ;NO MATCH..ELSE VALUE IN S2
MOVEM S2,ARG.DA(P3) ;SAVE THE DATA
SETD.2: MOVE S1,P1 ;GET ARGUMENT TYPE
MOVX S2,ARG.SZ ;GET THE SIZE
PUSHJ P,ARGRTN ;SAVE THE ARGUMENT
JRST SETI.1 ;GET NEXT FIELD
DENTAB: $STAB
.KY160,,S.1600 ;1600
.KY625,,S.6250 ;6250
.KY800,,S.800 ;800
.KY556,,S.556 ;556
.KY200,,S.200 ;200
$ETAB
SUBTTL SETLBT -- SET THE LABEL TYPE
SETLBT: PUSHJ P,P$KEYW ;GET A KEYWORD
JUMPF .POPJ ;BAD COMMAND
MOVEI S2,LBTTAB ;LABEL TYPE TABLE
JRST SETD.1 ;PROCESS ARGUMENT
LBTTAB: $STAB
.KYANS,,S.ANSI ;ANSI LABELS
.KYEBC,,S.EBCD ;EBCDIC
.KYT20,,S.T20 ;TOPS-20 LABELS
.KYUNL,,S.UNLA ;UNLABELED TAPE
$ETAB
SUBTTL SETOVR -- SET TAPE INIT OVERIDE FUNCTION
SETOVR: PUSHJ P,P$KEYW ;GET A KEYWORD
JUMPF .POPJ ;BAD COMMAND
MOVEI S2,OVRDSP ;OVERIDE TABLE
SETOV1: PUSHJ P,TABSRC ;SEARCH THE TABLE
JUMPF .POPJ ;PASS ERROR UP
MOVE S1,S2 ;FUNCTION CODE
MOVEI S2,1 ;ARGUMENT TYPE
PUSHJ P,ARGRTN ;SAVE THE ARGUMENT
JRST SETI.1 ;GET THE NEXT ONE
OVRDSP: $STAB
.KYYES,,.SIOVR ;OVERIDE EXPIRATION
.KYNO,,.SINOV ;NO OVERIDE
$ETAB
SUBTTL SETOWN -- SET TAPE INIT OWNER
SETOWN: PUSHJ P,P$USER ;GET THE USER FIELD
JUMPF .POPJ ;ERROR..RETURN
MOVEM S1,ARG.DA(P3) ;SAVE THE USER
JRST SETD.2 ;FINISH BLOCK AND CONTINUE
SUBTTL SETPRO -- SET THE PROTECTION FOR THE TAPE
SUBTTL SETCNT -- SET THE COUNT MULTIPLE INITIALIZATION
SUBTTL SETINC -- SET INCREMENT FOR NEXT VOLUME-ID
SUBTTL SETSVI -- SET STARTING VOLUME NUMBER
SETCNT:
SETINC:
SETSVI:
SETPRO: PUSHJ P,P$NUM ;GET THE NUMBER
JUMPF .POPJ ;ERROR..RETURN
MOVEM S1,ARG.DA(P3) ;SAVE THE DATA
JRST SETD.2 ;FINISH BLOCK AND RETURN
SUBTTL SETTDP -- SET THE TAPE DISPOSITION WHEN DONE
SETTDP: PUSHJ P,P$KEYW ;GET A KEYWORD
JUMPF .POPJ ;BAD COMMAND
MOVEI S2,TDPDSP ;TAPE DISPOSITION TABLE
JRST SETOV1 ;FINISH IT OFF
TDPDSP: $STAB
.KYHLD,,.SIHLD ;HOLD TAPE
.KYUNL,,.SIUNL ;UNLOAD THE TAPE
$ETAB
SUBTTL SETVID -- SETUP VOLUME ID
SETVID: PUSHJ P,PVOLID ;PROCESS VOLUME-ID
JUMPT SETI.1 ;O.K.. GET NEXT BLOCK
POPJ P, ;PASS ERROR UP
SUBTTL TABSRC -- TABLE SEARCH ROUTINE
;THIS ROUTINE WILL SEARCH A TABLE FOR A SPECIFIED VALUE AND
;RETURN THE ASSOCIATED INFO
;THE TABLE ENTRIES SHOULD HAVE CODE IN LEFT HALF AND DATA IN RIGHT HALF
;AND USE $STAB TO START THE TABLE AND $ETAB TO END IT
;CALL S1/ ITEM TO LOOK FOR
; S2/ ADDRESS OF TABLE
;
;
;RETURN S1/ ITEM TO LOOK FOR
; S2/ ITEM FOUND IN TABLE
;WILL USE T1 AND T2 FOR SCRATCH
TABSRC:: HLLZ T1,(S2) ;GET THE NUMBER OF ENTRIES
MOVN T1,T1 ;MAKE IT NEGATIVE
HRRI T1,1(S2) ;ADDRESS OF THE TABLE
TABS.1: HLRZ T2,(T1) ;GET THE ENTRY
CAMN S1,T2 ;MATCH?
JRST TABS.2 ;YES..
AOBJN T1,TABS.1 ;TRY NEXT ONE
$RETF ;ERROR..RETURN
TABS.2: HRRZ S2,(T1) ;GET THE DATA
$RETT ;RETURN TRUE
SUBTTL GETDES -- GET DEVICE DESIGNATOR WORD
;THIS ROUTINE WILL RETURN THE DEVICE DESIGNATOR WORD FOR
;THE DEVICE BLOCK PASSED
;
;RETURN S2/ DEVICE DESIGNATOR INFO
IFN FTJSYS,<
GETDES: HRROI S1,ARG.DA(S1) ;GET STRING ADDRESS
HRRZM S1,G$ARG1 ;SAVE THE POINTER
STDEV ;GET DESIGNATOR
$RETF ;RETURN FALSE
TRNE S2,400000 ;CHECK NOT MT DEVICE
PJRST E$ITD ;ERROR CODE
HLRZS S2 ;CLEAR RIGHT HALF AND PLACE IN RIGHT
SUBI S2,.DVDES ;GET TO DEVICE TYPE
$RETT ;RETURN DESIGNATOR IN S2
>;END FTJSYS
IFN FTUUOS,<
GETDES: HRROI S1,ARG.DA(S1) ;GET STRING ADDRESS
HRRZM S1,G$ARG1 ;SAVE STRING POINTER
PUSHJ P,S%SIXB ;CONVERT TO SIXBIT
DEVCHR S2, ;DO THE DEVCHR
SKIPN S2 ;ANY BITS
$RETF ;RETURN FALSE
$RETT ;RETURN TRUE
>;END FTUUOS
SUBTTL GETTAP -- GET A TAPE DEVICE
;THIS ROUTINE WILL CHECK FOR A VALID TAPE DEVICE AND RETURN FALSE
;IF DEVICE IS NOT THERE
;OTHERWISE
; S1/ ADDRESS OF BLOCK
; S2/ LENGTH OF BLOCK
IFN FTJSYS,<
GETTAP: DMOVE T1,S1 ;SAVE THE ARGUMENTS
PUSHJ P,GETDES ;GET THE DESIGNATOR
JUMPF E$ITD ;ERROR ..RETURN
CAIE S2,.DVMTA ;IS IT MTA
JRST GETT.1 ;SETUP ERROR RETURN
DMOVE S1,T1 ;RESTORE S1 AND S2 FROM P$DEV RETURN
$RETT ;RETURN TRUE
GETT.1: DMOVE S1,T1 ;RESTORE DEVICE DATA
$RETF ;RETURN FALSE
>;END FTJSYS
IFN FTUUOS,<
GETTAP: DMOVE T1,S1 ;SAVE AC'S IN T1 AND T2
PUSHJ P,GETDES ;GET DEVICE DESIGNATOR
JUMPF .POPJ ;ERROR RETURN
TXNN S2,DV.MTA ;TAPE DRIVE
PJRST E$ITD ;INVALID TAPE DRIVE
DMOVE S1,T1 ;RESTORE S1 AND S2
$RETT ;RETURN TRUE
>;END FTUUOS
SUBTTL SETSTR -- SET STRUCTURE COMMAND FOR -20
IFN FTJSYS,<
SETSTR: PUSHJ P,CHKWHL ;PROGRAM WHEEL OR OPERATOR
JUMPF E$IPE ;INSUFFIECIENT PRIVILEGES
MOVX S1,.OTSST ;SET STRUCTURE COMMAND FOR -20
STORE S1,.MSTYP(MO),MS.TYP ;SAVE THE TYPE IN HEADER
PUSHJ P,PSTRUC ;PROCESS A STRUCTURE BLOCK
JUMPF .POPJ ;ERROR..RETURN
PUSHJ P,P$KEYW ;GET THE OPTIONS
JUMPF .POPJ ;ERROR..RETURN
MOVEI S2,STRDSP ;STRUCTURE DISPATCH TABLE
PUSHJ P,TABSRC ;SEARCH THE TABLE
JUMPF .POPJ ;ERROR..RETURN
MOVEM S2,ARG.DA(P3) ;SAVE VALUE IN BLOCK
MOVX S1,.STCHR ;STRUCTURE CHARACTERISTICS
MOVEI S2,2 ;SIZE OF BLOCK
PUSHJ P,ARGRTN ;BUILD BLOCK
PJRST CMDEND ;CHECK FOR END AND SEND TO QUASAR
STRDSP: $STAB
.KYACK,,S.ACKN ;ACKNOWLEDGED
.KYAVA,,S.AVAL ;AVAILABLE
.KYDOM,,S.DOMS ;DOMESTIC
.KYFOR,,S.FORN ;FOREIGN
.KYREG,,S.REGU ;REGULATED
.KYUAV,,S.UAVL ;UNAVAILABLE
.KYURG,,S.UREG ;UNREGULATED
.KYIGN,,S.IGNO ;IGNORE
$ETAB
>;END FTJSYS
SUBTTL Q$SHWS -- SHOW STATUS ROUTINE
;THIS ROUTINE WILL SEND A SHOW STATUS MESSAGE TO QUASAR
Q$SHWS:: MOVX S1,.OMSHS ;GET THE SHOW STATUS CODE
STORE S1,.MSTYP(MO),MS.TYP ;SAVE THE TYPE CODE
PJRST PROSHW ;PROCESS SHOW MESSAGE
SUBTTL Q$SHWP -- SHOW PARAMETERS ROUTINE
;THIS ROUTINE WILL SEND A SHOW PARAMETERS MESSAGE TO QUASAR
Q$SHWP:: MOVX S1,.OMSHP ;GET SHOW PARAMTERS CODE
STORE S1,.MSTYP(MO),MS.TYP ;SAVE THE TYPE CODE
PJRST PROSHW ;PROCESS SHOW MESSAGE
SUBTTL PROSHW -- PROCESS SHOW STATUS AND SHOW PARAMETERS
;COMMON CODE FOR SHOW STATUS AND SHOW PARAMETERS
PROSHW: SETOM ARG.DA+OBJ.TY(P3) ;DEFAULT TO ALL TYPES
SETOM ARG.DA+OBJ.UN(P3) ;DEFAULT FOR ALL UNITS
SETOM ARG.DA+OBJ.ND(P3) ;DEFAULT FOR ALL NODES
MOVE S1,G$OPRA ;GET THE OPERATOR ADDRESS
MOVX T1,OP.REM ;REMOTE OPERATOR FLAG
TDNN T1,OPR.FL(S1) ;IS IT REMOTE?
JRST PROS.0 ;NO.. ASSUME ALL NODES AS DEFAULT
MOVE S2,OPR.ND(S1) ;GET NODE ADDRESS
MOVE S2,NOD.NX(S2) ;GET THE NODE NAME
MOVEM S2,ARG.DA+OBJ.ND(P3) ;SAVE THE NODE IN BLOCK
PROS.0: PUSHJ P,P$CFM ;CHECK FOR CONFIRM
JUMPT PROS.6 ;SAVE BLOCK AND RETURN
PUSHJ P,P$KEYW ;GET A KEYWORD..(TYPE)
JUMPF PROS.2 ;TRY FOR A SWITCH
CAIG S1,.OTMAX ;VALID OBJECT TYPE
JRST PROS.1 ;YES..GOOD OBJECT
CAIN S1,.KYDSK ;WAS IT A DISK?
PJRST SHWDSK ;PROCESS THE DISKS
CAIN S1,.KYSTR ;WAS IT A STRUCTURE
PJRST SHWSTR ;PROCESS THE STRUCTURES
CAIN S1,.KYATP ;ALL TAPES?
PJRST SHWTAP ;PROCESS THE TAPES
CAIN S1,.KYNOD ;CHECK FOR NETWORK NODE
PJRST SHWNOD ;SHOW NODE COMMAND
$RETF ;BAD COMMAND
PROS.1: MOVEM S1,ARG.DA+OBJ.TY(P3) ;SAVE THE OBJECT TYPE
PUSHJ P,P$CFM ;END OF COMMAND?
JUMPT PROS.5 ;FINISH OFF BLOCK
PROS.2: PUSHJ P,P$SWIT ;CHECK FOR A SWITCH
JUMPF PROS.4 ;NO..TRY OBJECT BLOCK REMAINDER
CAIE S1,.SWNOD ;NODE?
JRST [PUSHJ P,PROSHT ;PROCESS SHORT IF THERE
JUMPF .POPJ ;ERROR..RETURN
PJRST PROS.5] ;FINISH OFF THE BLOCK
PUSHJ P,P$NODE ;GET THE NODE
JUMPF .POPJ ;ERROR..RETURN
PROS.3: MOVEM S1,ARG.DA+OBJ.ND(P3) ;SAVE NODE IN BLOCK
PUSHJ P,OPRENB ;CHECK IF OPR ENABLED FOR NODE
JUMPF .POPJ ;ERROR ..RETURN
PUSHJ P,P$SWIT ;CHECK FOR A SWITCH
JUMPF PROS.5 ;NO..JUST SAVE OBJECT BLOCK
CAIE S1,.SWSHT ;WAS IT SHORT
$RETF ;NO..RETURN FALSE
MOVX S1,LS.FST ;GET THE FLAGS
IORM S1,.OFLAG(MO) ;SAVE IN FLAG WORD
JRST PROS.5 ;SAVE THE BLOCK AND FINISH
PROS.4: PUSHJ P,FINOBJ ;FINISH OBJECT BLOCK
JUMPF .POPJ ;NO..ERROR..RETURN
PUSHJ P,P$SWIT ;SWITCH THERE?
JUMPF CMDEND ;CHECK FOR THE END
PUSHJ P,PROSHT ;PROCESS /SHORT IF THERE
JUMPF .POPJ ;ERROR...RETURN
PJRST CMDEND ;CHECK FOR END AND SEND IT
PROS.5: MOVX S1,.OROBJ ;BLOCK TYPE
MOVX S2,.OBJLN ;BLOCK SIZE
PUSHJ P,ARGRTN ;SAVE THE BLOCK
ANDI P3,777 ;GET LENGTH OF MESSAGE
STORE P3,.MSTYP(MO),MS.CNT ;SAVE THE COUNT
PJRST SNDQSR ;SEND THE COMMAND
PROS.6: PUSHJ P,CHKWHL ;WHEEL OR OPERATOR?
JUMPT PROS.5 ;YES..SAVE BLOCK NOW
MOVE S1,G$OPRA ;GET OPERATOR ADDRESS
MOVE S1,OPR.ND(S1) ;GET NODE ADDRESS
MOVE S1,NOD.NX(S1) ;GET NODE NAME
MOVEM S1,ARG.DA+OBJ.ND(P3) ;SAVE VALUE
PJRST PROS.5 ;FINISH OFF COMMAND
PROSHT: CAIE S1,.SWSHT ;WAS IT SHORT
$RETF ;NO..RETURN FALSE
MOVX S1,LS.FST ;GET THE FLAGS
IORM S1,.OFLAG(MO) ;SAVE IN FLAG WORD
$RETT ;RETURN TRUE
Q$SHWR:: MOVX S1,.OMSHR ;SHOW ROUTE TABLES
STORE S1,.MSTYP(MO),MS.TYP ;SAVE THE MESSAGE TYPE
MOVEI S1,.OHDRS ;JUST THE HEADER
STORE S1,.MSTYP(MO),MS.CNT ;SAVE THE COUNT
PJRST SNDQSR ;SEND TO QUASAR
SUBTTL SHWNOD -- SHOW STATUS/PARAMETERS NETWORK COMMAND
;THIS ROUTINE WILL BUILD A NODE BLOCK FOR QUASAR TO IDENTIFY THE
;NODE TO BE EXAMINED.
;IF NO NODENAME IS SPECIFIED THE DEFAULT -1 WILL BE USED.
SHWNOD: MOVX S1,.OMSSN ;SHOW STATUS NODE
LOAD S2,.MSTYP(MO),MS.TYP ;GET THE TYPE BLOCK
CAIE S2,.OMSHS ;WAS IT SHOW STATUS
MOVX S1,.OMSPN ;NO..SHOW PARAMETERS NODE
STORE S1,.MSTYP(MO),MS.TYP ;SAVE THE TYPE IN BLOCK
PUSHJ P,P$NODE ;GET THE NODE DATA
SKIPT ;O.K.. CONTINUE ON
SETOM S1 ;ASSUME ALL NODES
PUSHJ P,SAVNOD ;SAVE THE VALUE
PJRST CMDEND ;END THE COMMAND AND SEND IT
SUBTTL SHWTAP -- SHOW TAPE STATUS
;THIS ROUTINE WILL SHOW THE STATUS OF THE TAPE DRIVE
SHWTAP: PUSHJ P,CHKWHL ;BETTER BE PRIVILEGED
JUMPF E$IPE ;INSUFFICIENT PRIVILEGES
MOVEI S1,.OTSHT ;SHOW STATUS COMMAND
STORE S1,.MSTYP(MO),MS.TYP ;SAVE THE MESSAGE TYPE
PUSHJ P,P$DEV ;WAS IT A DEVICE
JUMPT SHWT.1 ;YES.. BUILD DEVICE BLOCK
MOVX S1,.ALTAP
MOVEI S2,1 ;BLOCK SIZE
PUSHJ P,ARGRTN ;SAVE THE BLOCK
JRST SHWT.2 ;FINISH OFF THE COMMAND
SHWT.1: PUSHJ P,PSTA.1 ;BUILD THE BLOCK
JUMPF .POPJ ;FAIL..RETURN
SHWT.2: PUSHJ P,P$SWIT ;IS THERE A SWITCH?
JUMPF CMDEND ;NO..FINISH OFF COMMAND
MOVEI S2,TAPSWI ;TAPE SWITCHES
SHWTAB: PUSHJ P,TABSRC ;SEARCH THE TABLE
JUMPF .POPJ ;ERROR..RETURN
MOVE S2,(S2) ;GET THE DATA
IORM S2,.OFLAG(MO) ;SAVE THE FLAGS
PJRST CMDEND ;END THE COMMAND
TAPSWI: $STAB
.SWALL,,[ST.ALL] ;ALL
.SWCHR,,[ST.CHR] ;CHARACTERISTICS
.SWFRE,,[ST.AVA] ;FREE(AVAILABLE)
$ETAB
SUBTTL SHWSTR -- SHOW STATUS STRUCTURES
;THIS COMMAND WILL SHOW STATUS OF STRUCTURES
SHWSTR: PUSHJ P,CHKWHL ;MUST BE PRIVILEGED
JUMPF E$IPE ;INSUFFICIENT PRIVILEGES
MOVEI S1,.OMSTR ;GET MESSAGE TYPE
STORE S1,.MSTYP(MO),MS.TYP ;SAVE THE TYPE
PUSHJ P,PSTRUC ;PROCESS THE STRUCTURE
PJRST CMDEND ;END THE COMMAND AND SEND TO QUASAR
SUBTTL SHWDSK -- SHOW STATUS DISK DRIVES
;THIS ROUTINE WILL DO SHOW STATUS OF DISK DRIVES
SHWDSK: PUSHJ P,CHKWHL ;BETTER BE PRIVILEGED
JUMPF E$IPE ;INSUFFICIENT PRIVILEGES
MOVEI S1,.OTSHD ;SHOW STATUS COMMAND
STORE S1,.MSTYP(MO),MS.TYP ;SAVE THE MESSAGE TYPE
MOVX S1,.ALDSK ;FOR ALL DISK DRIVES
MOVEI S2,1 ;ONE WORD
PUSHJ P,ARGRTN ;SAVE THE BLOCK
PUSHJ P,P$SWIT ;CHECK FOR A SWITCH
JUMPF CMDEND ;NONE.. FINISH OFF COMMAND
MOVEI S2,DSKDSP ;GET DSK TABLE ADDRESS
JRST SHWTAB ;DO THE TABLE LOOKUP
DSKDSP: $STAB
.SWALL,,[ST.ALL] ;ALL
.SWAVA,,[ST.AVA] ;AVAILABLE
.SWMNT,,[ST.MNT] ;MOUNTED
$ETAB
SUBTTL Q$SHWQ -- SHOW QUEUES COMMAND
;THIS ROUTINE WILL FORMAT MESSAGE TO QUASAR FOR SHOW QUEUES
Q$SHWQ:: MOVX S1,.OMSHQ ;SHOW THE QUEUES
STORE S1,.MSTYP(MO),MS.TYP ;SAVE THE MESSAGE TYPE
PUSHJ P,P$KEYW ;GET A KEYWORD
JUMPF SHWQ.7 ;CHECK FOR CONFIRM
MOVEI S2,QUETYP ;GET THE QUEUE TYPE
PUSHJ P,TABSRC ;SEARCH THE TABLE
JUMPT SHWQ.2 ;PROCESS QUEUE TYPE
CAIN S1,.KYALL ;WAS ALL WANTED
JRST [ SETO S1, ;SET FOR ALL QUEUES
JRST SHWQ.3 ] ;SAVE THE ENTRY
PJRST E$IQS ;INVALID QUEUE SPECIFIED
SHWQ.2: MOVE S1,(S2) ;GET THE DATA
SHWQ.3: STORE S1,.OHDRS+ARG.DA(MO) ;SAVE IN MESSAGE
MOVEI S1,.LSQUE ;GET ARGUMENT TYPE
MOVEI S2,ARG.SZ ;GET ARGUMENT SIZE
PUSHJ P,ARGRTN ;SETUP THE ARGUMENT
PUSHJ P,P$CFM ;CHECK FOR COMMAND END
JUMPF SHWQ.5 ;CHECK FOR SWITCHES
PUSHJ P,CHKRMT ;CHECK FOR NODE BLOCK NEEDED
SHWQ.4: ANDI P3,777 ;GET MESSAGE LENGTH
STORE P3,.MSTYP(MO),MS.CNT ;SAVE THE COUNT
PJRST SNDQSR ;SEND THE MESSAGE TO QUASAR
SHWQ.5: PUSHJ P,P$SWIT ;CHECK FOR SWITCHES
JUMPF .POPJ ;BAD COMMAND ..RETURN FALSE
SETZM T1 ;SET A FLAG
CAIN S1,.SWNOD ;WAS IT A NODE?
JRST SHWQ.9 ;YES..CHECK IT OUT
CAIN S1,.SWALL ;WAS IT ALL
MOVX T1,LS.ALL ;SETUP ALL FLAG
CAIN S1,.SWSHT ;WAS IT SHORT
MOVX T1,LS.FST ;SETUP FAST LISTING
JUMPE T1,.RETF ;NONE SET..RETURN FALSE
MOVEM T1,.OFLAG(MO) ;SAVE FLAGS IN MESSAGE
PUSHJ P,P$SWIT ;IS THERE A SWITCH LEFT?
JUMPT SHWQ.8 ;CHECK IF NODE AND VALIDATE
PUSHJ P,CHKRMT ;CHECK IF REMOTE
SHWQ.6: PUSHJ P,P$CFM ;CHECK FOR MESSAGE END
JUMPT SHWQ.4 ;FINISH AND SEND MESSAGE
$RETF ;RETURN FALSE
SHWQ.7: SETO S1, ;SETUP FOR ALL QUEUES
PJRST SHWQ.3 ;SETUP BLOCK AND RETURN
SHWQ.8: CAIE S1,.SWNOD ;WAS IT A NODE
$RETF ;NO..RETURN FALSE
SHWQ.9: PUSHJ P,CNODSW ;CHECK OUT THE NODE
JUMPF .POPJ ;FAIL..RETURN
JRST SHWQ.6 ;CHECK FOR THE END
DEFINE X(TYP),<
.OT'TYP,,[LIQ'TYP] >
QUETYP: $STAB
DEVQUE
$ETAB
SUBTTL Q$SHWC -- SHOW CONTROL FILE COMMAND
;THIS ROUTINE DOES THE OLD BATCON EXAMINE FUNCTION FOR
;SHOWING THE OPERATOR LINES IN A BATCH CONTROL-FILE
Q$SHWC:: MOVX S1,.OMSHC ;SHOW CONTROL-FILE TYPE
STORE S1,.MSTYP(MO),MS.TYP ;SAVE THE TYPE
PUSHJ P,BLDOBJ ;BUILD AN OBJECT BLOCK
JUMPF .POPJ ;ERROR..RETURN
MOVEI T1,.OHDRS+ARG.DA(MO) ;POINT TO OBJECT BLOCK
LOAD S1,OBJ.UN(T1),OU.HRG ;GET THE HIGH VALUE
JUMPN S1,.RETF ;NON-ZERO..ERROR
LOAD S1,OBJ.TY(T1) ;GET THE TYPE FIELD
CAXE S1,.OTBAT ;BETTER BE BATCH
$RETF ;RETURN FALSE..ERROR
PUSHJ P,P$SWIT ;GET A SWITCH
JUMPF SHWC.2 ;NO..SETUP DEFAULT LINES
CAIE S1,.SWLNS ;IS IT LINES
$RETF ;INVALID COMMAND
MOVEI T2,.SHCLN ;YES..SETUP SHOW LINES TYPE
PUSHJ P,P$NUM ;GET A NUMBER
JUMPF .POPJ ;ERROR..RETURN
SHWC.1: STORE S1,ARG.DA(P3) ;SAVE NUMBER IN BLOCK
MOVE S1,T2 ;GET THE ARGUMENT TYPE
MOVEI S2,ARG.SZ ;SIZE OF THE BLOCK
PUSHJ P,ARGRTN ;SAVE THE ARGUMENT
PJRST CMDEND ;FINISH OFF THE MESSAGE
SHWC.2: MOVEI S1,^D10 ;DEFAULT TO 10 LINES
MOVEI T2,.SHCLN ;SHOW CONTROL FILE LINES
JRST SHWC.1 ;FINISH OFF BLOCK AND MESSAGE
SUBTTL Q$DISMOUNT -- DISMOUNT COMMAND FOR THE -20
Q$DISMOUNT::
PUSHJ P,CHKWHL ;PROGRAM WHEEL OR OPERATOR
JUMPF E$IPE ;INSUFFIECIENT PRIVILEGES
PUSHJ P,P$KEYW ;GET THE KEYWORD
JUMPF .POPJ ;ERROR..RETURN
CAIE S1,.KYSTR ;IS IT A STRUCTURE
JRST DISM.1 ;NO..TRY TAPE
PUSHJ P,PSTRUC ;PROCESS THE STRUCTURE
JUMPT CMDEND ;O.K... FINISH OFF COMMAND
POPJ P, ;PASS THE ERROR BACK
DISM.1: CAIE S1,.KYTAP ;CHECK FOR A TAPE
$RETF ;NO..RETURN FALSE
MOVEI S1,.OTUNL ;GET THE UNLOAD TYPE
STORE S1,.MSTYP(MO),MS.TYP ;RESET THE MESSAGE TYPE
JRST UNLO.1 ;PROCESS THE UNLOAD
SUBTTL Q$RECOGNIZE -- RECOGNIZE COMMAND FOR THE -10
SUBTTL Q$UNLOAD -- UNLOAD COMMAND FOR TAPES
IFN FTUUOS,<
Q$RECOGNIZE::
>;END FTUUOS
Q$UNLOAD::
PUSHJ P,CHKWHL ;PROGRAM WHEEL OR OPERATOR
JUMPF E$IPE ;INSUFFIECIENT PRIVILEGES
UNLO.1: PUSHJ P,PSTAPE ;SAVE THE TAPE BLOCK
JUMPT CMDEND ;O.K... FINISH OFF COMMAND
POPJ P, ;PASS THE ERROR BACK
SUBTTL Q$ESTR -- ENABLE AUTOMATIC STRUCTURE RECOGNITION
Q$ESTR:: PUSHJ P,CHKWHL ;PROGRAM WHEEL OR OPERATOR
JUMPF E$IPE ;INSUFFIECIENT PRIVILEGES
MOVX S1,.OTENA ;GET ENABLE CODE
SKIPE P1 ;CHECK IF ENABLE OR DISABLE
MOVX S1,.OTDIS ;GET DISABLE CODE
STORE S1,.MSTYP(MO),MS.TYP ;SAVE THE TYPE IN MESSAGE
MOVX S1,.ASREC ;GET ASR TYPE
MOVEI S2,1 ;GET THE LENGTH
PUSHJ P,ARGRTN ;ADD ARGUMENT TO MESSAGE
PUSHJ P,P$KEYW ;GET A KEYWORD
JUMPF CMDEND ;NO...CHECK END AND SEND
CAIN S1,.KYSTR ;WAS IT FOR ALL STRUCTURES
JRST ESTR.1 ;YES SETUP FOR ALL STRUCTURES
PUSHJ P,PSTRUC ;PROCESS A STRUCTURE BLOCK
JUMPT CMDEND ;O.K.. FINISH AND SEND
POPJ P, ;ELSE RETURN WITH CURRENT FALSE STATE
ESTR.1: MOVX S1,.ALSTR ;ALL STRUCTURES
MOVEI S2,1 ;LENGTH OF BLOCK
PUSHJ P,ARGRTN ;BUILD THE ARGUMENT
PJRST CMDEND ;FINISH OFF COMMAND
SUBTTL Q$ETAPE -- ENABLE TAPE COMMAND
SUBTTL Q$DTAPE -- DISABLE TAPE COMMAND
;THIS ROUTINE WILL HANDLE ENABLE AND DISABLE TAPE COMMANDS
Q$DTAPE::
Q$ETAPE:: PUSHJ P,CHKWHL ;PROGRAM WHEEL OR OPERATOR
JUMPF E$IPE ;INSUFFIECIENT PRIVILEGES
MOVX S1,.OTENA ;GET ENABLE CODE
SKIPE P1 ;CHECK IF ENABLE OR DISABLE
MOVX S1,.OTDIS ;GET DISABLE CODE
STORE S1,.MSTYP(MO),MS.TYP ;SAVE THE TYPE IN MESSAGE
MOVX S1,.AVREC ;GET AVR TYPE
MOVEI S2,1 ;GET THE LENGTH
PUSHJ P,ARGRTN ;ADD ARGUMENT TO MESSAGE
PUSHJ P,P$KEYW ;GET A KEYWORD
JUMPF CMDEND ;NO...CHECK END AND SEND
CAIN S1,.KYATP ;WAS IT FOR ALL TAPES
JRST ETAP.1 ;YES SETUP FOR ALL TAPES
PUSHJ P,PSTAPE ;PROCESS A TAPE BLOCK
JUMPF .POPJ ;ERROR..RETURN
PJRST CMDEND ;FINISH COMMAND AND SEND TO QUASAR
ETAP.1: MOVX S1,.ALTAP ;ALL TAPES
MOVEI S2,1 ;LENGTH OF BLOCK
PUSHJ P,ARGRTN ;BUILD THE ARGUMENT
PJRST CMDEND ;FINISH OFF COMMAND
SUBTTL Q$LOCK/Q$ULOCK ;LOCK AND UNLOCK COMMAND
;THIS COMMAND WILL LOCK A STRUCTURE FROM FURTHER ACCESS
;NOW OR OPTIONALLY AT A SPECIFIED TIME
Q$LOCK:: SETOM P1 ;SET FOR LOCK
SKIPA ;SKIP UNLOCK
Q$ULOCK:: SETZM P1 ;SET FOR UNLOCK
PUSHJ P,PSTRUC ;GET THE STRUCTURE
JUMPF .POPJ ;INVALID COMMAND
PUSHJ P,P$TIME ;GET THE TIME
MOVEM S1,ARG.DA(P3) ;SAVE THE UDT
MOVX S1,.ORTIM ;TIME BLOCK
MOVEI S2,ARG.SZ ;GET THE SIZE
PUSHJ P,ARGRTN ;SAVE THE ARGUMENT
PJRST CMDEND ;END IT
SUBTTL Q$MOUNT -- MOUNT TAPE AND DISK COMMAND
; remove the mount command on Jul 9,1979
comment \
;THIS COMMAND WILL BUILD MESSAGE FOR MOUNTING STRUCTURES
Q$MOUNT:: PUSHJ P,CHKWHL ;PROGRAM WHEEL OR OPERATOR
JUMPF E$IPE ;INSUFFICIENT PRIVILEGES
PUSHJ P,P$KEYW ;CHECK FOR A KEYWORD
JUMPF .POPJ ;NO..INVALID COMMAND
CAIE S1,.KYSTR ;IS IT A STRUCTURE
$RETF ;NO..INVALID COMMAND
PUSHJ P,PSTRUC ;PROCESS THE STRUCTURE
JUMPF .POPJ ;ERROR..RETURN
PUSHJ P,P$DEV ;CHECK FOR ALIAS NAME
JUMPF CMDEND ;NO..CHECK FOR COMMAND END
MOVX T1,.STALS ;STRUCTURE ALIAS
STORE T1,ARG.HD(S1),AR.TYP ;SAVE CODE IN BLOCK
PUSHJ P,MOVARG ;MOVE THE BLOCK
PJRST CMDEND ;CHECK FOR END..AND SEND TO QUASAR
\;end of mount command
SUBTTL Q$IDENTIFY -- IDENTIFY COMMAND FOR TAPES
;THIS COMMAND WILL IDENTIFY A TAPE DRIVE WITH A PARTICULAR TAPE
;REQUEST OR TAPE VOLUME
Q$IDENTIFY::
PUSHJ P,CHKWHL ;PROGRAM WHEEL OR OPERATOR
JUMPF E$IPE ;NO..INSUFFICIENT PRIVILEGES
PUSHJ P,PSTAPE ;SAVE THE TAPE BLOCK
JUMPF .POPJ ;ERROR..RETURN
PUSHJ P,P$KEYW ;CHECK FOR A KEYWORD
JUMPF .POPJ ;NO..ERROR..RETURN
MOVEI S2,IDNDSP ;USE THE DISPATCH
PUSHJ P,TABSRC ;CHECK THE TABLE
JUMPF .POPJ ;ERROR..RETURN
PJRST (S2) ;DO THE WORK
IDNDSP: $STAB
.KYRQN,,IDNRQN ;REQUEST NUMBER
.KYSCR,,IDNSCR ;SCRATCH TAPE
.KYVID,,IDNVID ;VOLUME-ID
$ETAB
; VOLUME-ID FOR IDENTIFY
IDNVID: PUSHJ P,PVOLID ;PROCESS VOLUME ID
JUMPT CMDEND ;O.K.. FINISH OFF MESSAGE
POPJ P, ;ERROR.. PASS CODE UP
; REQUEST NUMBER FOR IDENTIFY
IDNRQN: PUSHJ P,PREQNM ;PROCESS REQUEST NUMBER
JUMPF .POPJ ;ERROR..RETURN
PJRST CMDEND ;FINISH OFF COMMAND
; SCRATCH FOR IDENTIFY
IDNSCR: MOVEI S1,.SCRTP ;SCRATCH TAPE
MOVEI S2,1 ;ONE WORD BLOCK
PUSHJ P,ARGRTN ;SAVE THE ARGUMENT
PJRST CMDEND ;FINISH OFF THE COMMAND
SUBTTL Q$DEFINE -- DEFINE COMMAND FOR D60
;THIS COMMAND WILL DEFINE A DN60 NODE SO THAT PARAMETERS CAN BE SET
IFN FTDN60,<
Q$DEFINE::
PUSHJ P,CHKWHL ;PROGRAM WHEEL OR OPERATOR
JUMPF E$IPE ;INSUFFIECIENT PRIVILEGES
PUSHJ P,P$KEYW ;GET THE KEYWORD
JUMPF .POPJ ;ERROR..RETURN
CAIE S1,.KYNOD ;BETTER BE NODE
$RETF ;NO..RETURN FALSE
PUSHJ P,P$NODE ;GET A NODE
JUMPF .POPJ ;ERROR RETURN
PUSHJ P,SAVNOD ;SAVE THE NODE
PUSHJ P,P$KEYW ;GET A KEYWORD
JUMPF .POPJ ;ERROR..RETURN
SETZ T1, ;SET A FLAG
CAIN S1,.KY278 ;WAS IT 2780
MOVX T1,DF.278 ;2780
CAIN S1,.KY378 ;WAS IT 3780
MOVX T1,DF.378 ;3780
CAIN S1,.KYHSP ;WAS IT HASP
MOVX T1,DF.HSP ;HASP
JUMPE T1,.RETF ;ERROR..RETURN FALSE
MOVEM T1,DEF.TY(P3) ;SAVE THE TYPE
PUSHJ P,P$KEYW ;GET MODE KEYWORD
JUMPF .POPJ ;ERROR..RETURN
SETZ T1, ;SET THE FLAG
CAIN S1,.KYTRM ;WAS IT TERMINATION
MOVX T1,DF.TRM ;TERMINATION
CAIN S1,.KYEMU ;WAS IT EMULATION
MOVX T1,DF.EMU ;EMULATION
JUMPE T1,.RETF ;ZERO..ERROR..RETURN
MOVEM T1,DEF.MD(P3) ;SAVE THE MODE
PUSHJ P,P$NUM ;GET THE PORT NUMBER
JUMPF .POPJ ;ERROR..RETURN
MOVEM S1,DEF.PT(P3) ;SAVE THE PORT NUMBER
PUSHJ P,P$NUM ;GET THE LINE NUMBER
JUMPF .POPJ ;ERROR..RETURN
MOVEM S1,DEF.LN(P3) ;SAVE THE LINE NUMBER
MOVX S1,.DFBLK ;DEFINE BLOCK
MOVEI S2,DEF.SZ ;DEFINE SIZE
PUSHJ P,ARGRTN ;SAVE THE ARGUMENT
PJRST CMDEND ;FINISH COMMAND AND SEND IT
>;END FTDN60
SUBTTL Q$SWITCH -- SWITCH COMMAND FOR THE -20
;THIS COMMAND WILL SEND A MESSAGE TO MOUNTR (VIA QUASAR) TO
;SWITCH A GIVEN REQUEST TO ANOTHER VOLUME/DRIVE.
IFN FTJSYS,<
Q$SWITCH:: PUSHJ P,PREQNM ;PROCESS A REQUEST NUMBER
JUMPF .POPJ ;ERROR..RETURN
PUSHJ P,PVOLID ;PROCESS THE VOLUME ID
JUMPF .POPJ ;ERROR..RETURN
PUSHJ P,PSTAPE ;PROCESS A TAPE BLOCK
PJRST CMDEND ;TRY TO FINISH COMMAND IN ANY CASE
>;END FTJSYS
END