Trailing-Edge
-
PDP-10 Archives
-
BB-H138E-BM
-
6-1-sources/chmkeywrd.bli
There are 11 other files named chmkeywrd.bli in the archive. Click here to see a list.
%TITLE 'CHMKEYWRD - look for a keyword'
MODULE CHMKEYWRD ( ! Look for a keyword
IDENT = '3-002' ! File: CHMKEYWRD.BLI Edit: GB3002
) =
BEGIN
!
! COPYRIGHT (c) 1981, 1985 BY
! DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
! ALL RIGHTS RESERVED.
!
! THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
! ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
! INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
! COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
! OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
! TRANSFERRED.
!
! THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
! AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
! CORPORATION.
!
! DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
! SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
!
!++
! FACILITY: EDT -- The DEC Standard Editor
!
! ABSTRACT:
!
! This module compares the command buffer contents to a table
! of keywords.
!
! ENVIRONMENT: Runs at any access mode - AST reentrant
!
! AUTHOR: Bob Kushlis, CREATION DATE: Unknown
!
! MODIFIED BY:
!
! 1-001 - Original. DJS 04-Feb-1981. This module was created by
! extracting the routine EDT$$KWORD from module CHANGE.BLI.
! 1-002 - Regularize headers. JBS 03-Mar-1981
! 1-004 - Change to a table arranged alphabetically. STS 21-Sep-1982
! 1-005 - Move the keywords here from EDT$CHMPARSE, to reduce the program
! size on the PDP-11. Also, put an underscore in the entry point name. JBS 29-Sep-1982
! 1-006 - Accept lower case letters as equivalent to upper case, and improve error
! checking. JBS 01-Oct-1982
! 1-007 - Make this routine position-independent. JBS 01-Oct-1982
! 1-008 - Add conditionals for WPS and VT220. JBS 10-Feb-1983
! 1-009 - Don't forget the SUPPORTS library. JBS 11-Feb-1983
! 3-002 - Remove VT220 conditional to speed up code. CJG 25-Nov-1983
!--
%SBTTL 'Declarations'
!
! TABLE OF CONTENTS:
!
REQUIRE 'EDTSRC:TRAROUNAM';
FORWARD ROUTINE
EDT$$KEY_WORD : NOVALUE; ! Compare the command buffer contents to a table of keywords
!
! INCLUDE FILES:
!
REQUIRE 'EDTSRC:EDTREQ';
LIBRARY 'EDTSRC:TRANSLATE';
!
! MACROS:
!
! NONE
!
! EQUATED SYMBOLS:
!
FIELD
KEY_WORD_FIELD =
SET
KEY_WORD_NEXT = [0, 0, 18, 0],
KEY_WORD_NUM = [0, 18, 9, 0],
KEY_WORD_LEN = [0, 27, 9, 0],
KEY_WORD_POINTER = [1, 0, 36, 0]
TES;
LITERAL
V_FIELD = %O'1000000',
L_FIELD = %O'1000000000';
!
! OWN STORAGE:
!
!+
! Define the keywords used to make up change mode sub-commands.
!
! Each record in this table contains a address pointer to the next keyword
! with this alphabetic character the value of the keyword, its length,
! and the ASCII characters which comprise it.
!
! The table is a concatenation of keyword entries. Each
! consists of a pointer to the next keyword to examine if
! this one should fail, a keyword number byte, length byte,
! and the ASCII text for the keyword. A 0 length byte
! marks the end of the table. Letters in keywords are
! all upper case.
!-
BIND
ADDR_BASE = UPLIT (0),
END_VERBS = UPLIT (0, 0),
ASC_VERB = UPLIT (
END_VERBS - ADDR_BASE + V_FIELD * (VERB_K_ASC) + L_FIELD * (3), CH$PTR (UPLIT ('ASC'))),
ADV_VERB = UPLIT (
ASC_VERB - ADDR_BASE + V_FIELD * (VERB_K_ADV) + L_FIELD * (3), CH$PTR (UPLIT ('ADV'))),
A_VERBS = UPLIT (
ADV_VERB - ADDR_BASE + V_FIELD * (VERB_K_APPEND) + L_FIELD * (6), CH$PTR (UPLIT ('APPEND'))),
BELL_VERB = UPLIT (
END_VERBS - ADDR_BASE + V_FIELD * (VERB_K_BELL) + L_FIELD * (4), CH$PTR (UPLIT ('BELL'))),
B_VERBS = UPLIT (
BELL_VERB - ADDR_BASE + V_FIELD * (VERB_K_BACK) + L_FIELD * (4), CH$PTR (UPLIT ('BACK'))),
CUT_VERB = UPLIT (
END_VERBS - ADDR_BASE + V_FIELD * (VERB_K_CUT) + L_FIELD * (3), CH$PTR (UPLIT ('CUT'))),
CLSS_VERB = UPLIT (
CUT_VERB - ADDR_BASE + V_FIELD * (VERB_K_CLSS) + L_FIELD * (4), CH$PTR (UPLIT ('CLSS'))),
CHGL_VERB = UPLIT (
CLSS_VERB - ADDR_BASE + V_FIELD * (VERB_K_CHGL) + L_FIELD * (4), CH$PTR (UPLIT ('CHGL'))),
CHGU_VERB = UPLIT (
CHGL_VERB - ADDR_BASE + V_FIELD * (VERB_K_CHGU) + L_FIELD * (4), CH$PTR (UPLIT ('CHGU'))),
C_VERBS = UPLIT (
CHGU_VERB - ADDR_BASE + V_FIELD * (VERB_K_CHGC) + L_FIELD * (4), CH$PTR (UPLIT ('CHGC'))),
D_VERB = UPLIT (
END_VERBS - ADDR_BASE + V_FIELD * (VERB_K_DELETE) + L_FIELD * (1), CH$PTR (UPLIT ('D'))),
DUPC_VERB = UPLIT (
D_VERB - ADDR_BASE + V_FIELD * (VERB_K_DUPC) + L_FIELD * (4), CH$PTR (UPLIT ('DUPC'))),
DMOV_VERB = UPLIT (
DUPC_VERB - ADDR_BASE + V_FIELD * (VERB_K_DMOV) + L_FIELD * (4), CH$PTR (UPLIT ('DMOV'))),
DLWC_VERB = UPLIT (
DMOV_VERB - ADDR_BASE + V_FIELD * (VERB_K_DLWC) + L_FIELD * (4), CH$PTR (UPLIT ('DLWC'))),
DEFK_VERB = UPLIT (
DLWC_VERB - ADDR_BASE + V_FIELD * (VERB_K_DEFK) + L_FIELD * (4), CH$PTR (UPLIT ('DEFK'))),
DATE_VERB = UPLIT (
DEFK_VERB - ADDR_BASE + V_FIELD * (VERB_K_DATE) + L_FIELD * (4), CH$PTR (UPLIT ('DATE'))),
D_VERBS = UPLIT (
DATE_VERB - ADDR_BASE + V_FIELD * (VERB_K_DESEL) + L_FIELD * (5), CH$PTR (UPLIT ('DESEL'))),
EX_VERB = UPLIT (
END_VERBS - ADDR_BASE + V_FIELD * (VERB_K_EXIT) + L_FIELD * (2), CH$PTR (UPLIT ('EX'))),
E_VERBS = UPLIT (
EX_VERB - ADDR_BASE + V_FIELD * (VERB_K_EXT) + L_FIELD * (3), CH$PTR (UPLIT ('EXT'))),
F_VERBS = UPLIT (
END_VERBS - ADDR_BASE + V_FIELD * (VERB_K_FILL) + L_FIELD * (4), CH$PTR (UPLIT ('FILL'))),
H_VERBS = UPLIT (
END_VERBS - ADDR_BASE + V_FIELD * (VERB_K_HELP) + L_FIELD * (4), CH$PTR (UPLIT ('HELP'))),
I_VERBS = UPLIT (
END_VERBS - ADDR_BASE + V_FIELD * (VERB_K_INSERT) + L_FIELD * (1), CH$PTR (UPLIT ('I'))),
K_VERBS = UPLIT (
END_VERBS - ADDR_BASE + V_FIELD * (VERB_K_KS) + L_FIELD * (2), CH$PTR (UPLIT ('KS'))),
P_VERBS = UPLIT (
END_VERBS - ADDR_BASE + V_FIELD * (VERB_K_PASTE) + L_FIELD * (5), CH$PTR (UPLIT ('PASTE'))),
Q_VERBS = UPLIT (
END_VERBS - ADDR_BASE + V_FIELD * (VERB_K_QUIT) + L_FIELD * (4), CH$PTR (UPLIT ('QUIT'))),
R_VERB = UPLIT (
END_VERBS - ADDR_BASE + V_FIELD * (VERB_K_REPLACE) + L_FIELD * (1), CH$PTR (UPLIT ('R'))),
R_VERBS = UPLIT (
R_VERB - ADDR_BASE + V_FIELD * (VERB_K_REF) + L_FIELD * (3), CH$PTR (UPLIT ('REF'))),
S_VERB = UPLIT (
END_VERBS - ADDR_BASE + V_FIELD * (VERB_K_SUBS) + L_FIELD * (1), CH$PTR (UPLIT ('S'))),
SN_VERB = UPLIT (
S_VERB - ADDR_BASE + V_FIELD * (VERB_K_SN) + L_FIELD * (2), CH$PTR (UPLIT ('SN'))),
SHR_VERB = UPLIT (
SN_VERB - ADDR_BASE + V_FIELD * (VERB_K_SHR) + L_FIELD * (3), CH$PTR (UPLIT ('SHR'))),
SHL_VERB = UPLIT (
SHR_VERB - ADDR_BASE + V_FIELD * (VERB_K_SHL) + L_FIELD * (3), CH$PTR (UPLIT ('SHL'))),
SEL_VERB = UPLIT (
SHL_VERB - ADDR_BASE + V_FIELD * (VERB_K_SEL) + L_FIELD * (3), CH$PTR (UPLIT ('SEL'))),
S_VERBS = UPLIT (
SEL_VERB - ADDR_BASE + V_FIELD * (VERB_K_SSEL) + L_FIELD * (4), CH$PTR (UPLIT ('SSEL'))),
TI_VERB = UPLIT (
END_VERBS - ADDR_BASE + V_FIELD * (VERB_K_TI) + L_FIELD * (2), CH$PTR (UPLIT ('TI'))),
TD_VERB = UPLIT (
TI_VERB - ADDR_BASE + V_FIELD * (VERB_K_TD) + L_FIELD * (2), CH$PTR (UPLIT ('TD'))),
TC_VERB = UPLIT (
TD_VERB - ADDR_BASE + V_FIELD * (VERB_K_TC) + L_FIELD * (2), CH$PTR (UPLIT ('TC'))),
TOP_VERB = UPLIT (
TC_VERB - ADDR_BASE + V_FIELD * (VERB_K_TOP) + L_FIELD * (3), CH$PTR (UPLIT ('TOP'))),
TAB_VERB = UPLIT (
TOP_VERB - ADDR_BASE + V_FIELD * (VERB_K_TAB) + L_FIELD * (3), CH$PTR (UPLIT ('TAB'))),
TADJ_VERB = UPLIT (
TAB_VERB - ADDR_BASE + V_FIELD * (VERB_K_TADJ) + L_FIELD * (4), CH$PTR (UPLIT ('TADJ'))),
T_VERBS = UPLIT (
TADJ_VERB - ADDR_BASE + V_FIELD * (VERB_K_TGSEL) + L_FIELD * (5), CH$PTR (UPLIT ('TGSEL'))),
UNDW_VERB = UPLIT (
END_VERBS - ADDR_BASE + V_FIELD * (VERB_K_UNDW) + L_FIELD * (4), CH$PTR (UPLIT ('UNDW'))),
UNDL_VERB = UPLIT (
UNDW_VERB - ADDR_BASE + V_FIELD * (VERB_K_UNDL) + L_FIELD * (4), CH$PTR (UPLIT ('UNDL'))),
U_VERBS = UPLIT (
UNDL_VERB - ADDR_BASE + V_FIELD * (VERB_K_UNDC) + L_FIELD * (4), CH$PTR (UPLIT ('UNDC'))),
X_VERBS = UPLIT (
END_VERBS - ADDR_BASE + V_FIELD * (VERB_K_XLATE) + L_FIELD * (5), CH$PTR (UPLIT ('XLATE'))),
CARET_VERB = UPLIT (
END_VERBS - ADDR_BASE + V_FIELD * (VERB_K_CC) + L_FIELD * (1), CH$PTR (UPLIT ('^')));
BIND
VERB_TABLE = UPLIT (
A_VERBS - ADDR_BASE,
B_VERBS - ADDR_BASE,
C_VERBS - ADDR_BASE,
D_VERBS - ADDR_BASE,
E_VERBS - ADDR_BASE,
F_VERBS - ADDR_BASE,
END_VERBS - ADDR_BASE,
H_VERBS - ADDR_BASE,
I_VERBS - ADDR_BASE,
END_VERBS - ADDR_BASE,
K_VERBS - ADDR_BASE,
END_VERBS - ADDR_BASE,
END_VERBS - ADDR_BASE,
END_VERBS - ADDR_BASE,
END_VERBS - ADDR_BASE,
P_VERBS - ADDR_BASE,
Q_VERBS - ADDR_BASE,
R_VERBS - ADDR_BASE,
S_VERBS - ADDR_BASE,
T_VERBS - ADDR_BASE,
U_VERBS - ADDR_BASE,
END_VERBS - ADDR_BASE,
END_VERBS - ADDR_BASE,
X_VERBS - ADDR_BASE,
END_VERBS - ADDR_BASE,
END_VERBS - ADDR_BASE,
END_VERBS - ADDR_BASE,
END_VERBS - ADDR_BASE,
END_VERBS - ADDR_BASE,
CARET_VERB - ADDR_BASE);
!+
! The following are keywords which are entities.
!
! The values must be separated by two so we can add the direction to
! the entity for use as a case index.
!-
BIND
END_ENTITY = UPLIT (0, 0),
BW_ENT = UPLIT (
END_ENTITY - ADDR_BASE + V_FIELD * (ENT_K_BW) + L_FIELD * (2), CH$PTR (UPLIT ('BW'))),
BR_ENT = UPLIT (
BW_ENT - ADDR_BASE + V_FIELD * (ENT_K_BR) + L_FIELD * (2), CH$PTR (UPLIT ('BR'))),
BL_ENT = UPLIT (
BR_ENT - ADDR_BASE + V_FIELD * (ENT_K_BL) + L_FIELD * (2), CH$PTR (UPLIT ('BL'))),
BPAR_ENT = UPLIT (
BL_ENT - ADDR_BASE + V_FIELD * (ENT_K_BPAR) + L_FIELD * (4), CH$PTR (UPLIT ('BPAR'))),
BSEN_ENT = UPLIT (
BPAR_ENT - ADDR_BASE + V_FIELD * (ENT_K_BSEN) + L_FIELD * (4), CH$PTR (UPLIT ('BSEN'))),
B_ENTS = UPLIT (
BSEN_ENT - ADDR_BASE + V_FIELD * (ENT_K_BPAGE) + L_FIELD * (5), CH$PTR (UPLIT ('BPAGE'))),
C_ENTS = UPLIT (
END_ENTITY - ADDR_BASE + V_FIELD * (ENT_K_CHAR) + L_FIELD * (1), CH$PTR (UPLIT ('C'))),
EW_ENT = UPLIT (
END_ENTITY - ADDR_BASE + V_FIELD * (ENT_K_EW) + L_FIELD * (2), CH$PTR (UPLIT ('EW'))),
EL_ENT = UPLIT (
EW_ENT - ADDR_BASE + V_FIELD * (ENT_K_EL) + L_FIELD * (2), CH$PTR (UPLIT ('EL'))),
ER_ENT = UPLIT (
EL_ENT - ADDR_BASE + V_FIELD * (ENT_K_ER) + L_FIELD * (2), CH$PTR (UPLIT ('ER'))),
EPAR_ENT = UPLIT (
ER_ENT - ADDR_BASE + V_FIELD * (ENT_K_EPAR) + L_FIELD * (4), CH$PTR (UPLIT ('EPAR'))),
ESEN_ENT = UPLIT (
EPAR_ENT - ADDR_BASE + V_FIELD * (ENT_K_ESEN) + L_FIELD * (4), CH$PTR (UPLIT ('ESEN'))),
E_ENTS = UPLIT (
ESEN_ENT - ADDR_BASE + V_FIELD * (ENT_K_EPAGE) + L_FIELD * (5), CH$PTR (UPLIT ('EPAGE'))),
L_ENTS = UPLIT (
END_ENTITY - ADDR_BASE + V_FIELD * (ENT_K_LINE) + L_FIELD * (1), CH$PTR (UPLIT ('L'))),
N_ENTS = UPLIT (
END_ENTITY - ADDR_BASE + V_FIELD * (ENT_K_NL) + L_FIELD * (2), CH$PTR (UPLIT ('NL'))),
PAR_ENT = UPLIT (
END_ENTITY - ADDR_BASE + V_FIELD * (ENT_K_PAR) + L_FIELD * (3), CH$PTR (UPLIT ('PAR'))),
P_ENTS = UPLIT (
PAR_ENT - ADDR_BASE + V_FIELD * (ENT_K_PAGE) + L_FIELD * (4), CH$PTR (UPLIT ('PAGE'))),
SR_ENT = UPLIT (
END_ENTITY - ADDR_BASE + V_FIELD * (ENT_K_SR) + L_FIELD * (2), CH$PTR (UPLIT ('SR'))),
S_ENTS = UPLIT (
SR_ENT - ADDR_BASE + V_FIELD * (ENT_K_SEN) + L_FIELD * (3), CH$PTR (UPLIT ('SEN'))),
V_ENTS = UPLIT (
END_ENTITY - ADDR_BASE + V_FIELD * (ENT_K_VERT) + L_FIELD * (1), CH$PTR (UPLIT ('V'))),
W_ENTS = UPLIT (
END_ENTITY - ADDR_BASE + V_FIELD * (ENT_K_WORD) + L_FIELD * (1), CH$PTR (UPLIT ('W')));
BIND
ENTITY_TABLE = UPLIT (
B_ENTS - ADDR_BASE,
C_ENTS - ADDR_BASE,
END_ENTITY - ADDR_BASE,
E_ENTS - ADDR_BASE,
END_ENTITY - ADDR_BASE,
END_ENTITY - ADDR_BASE,
END_ENTITY - ADDR_BASE,
END_ENTITY - ADDR_BASE,
END_ENTITY - ADDR_BASE,
END_ENTITY - ADDR_BASE,
L_ENTS - ADDR_BASE,
END_ENTITY - ADDR_BASE,
N_ENTS - ADDR_BASE,
END_ENTITY - ADDR_BASE,
P_ENTS - ADDR_BASE,
END_ENTITY - ADDR_BASE,
END_ENTITY - ADDR_BASE,
S_ENTS - ADDR_BASE,
END_ENTITY - ADDR_BASE,
END_ENTITY - ADDR_BASE,
V_ENTS - ADDR_BASE,
W_ENTS - ADDR_BASE);
!
! EXTERNAL REFERENCES:
!
! In the routine
%SBTTL 'EDT$$KEY_WORD - look for a key word'
GLOBAL ROUTINE EDT$$KEY_WORD ( ! Look for a key word
TABLE_NO, ! 1 = verb table, 2 = entity table
KEY_NUM ! Key number
) : NOVALUE =
!++
! FUNCTIONAL DESCRIPTION:
!
! This routine scans a table of keywords, attempting to find a match
! in the current command buffer pointed to by CMD_PTR .
! The comparison is case blind.
!
! FORMAL PARAMETERS:
!
! TABLE_NO The number of the keyword table to use. 1 = use the
! verb table, 2 = use the entity table.
!
! KEY_NUM The returned value for the number of the entity or
! verb which matched from the table. Zero indicates
! no match.
!
!
! IMPLICIT INPUTS:
!
! CMD_END
! CMD_PTR
!
! IMPLICIT OUTPUTS:
!
! CMD_PTR
!
! ROUTINE VALUE:
!
! NONE
!
! SIDE EFFECTS:
!
! NONE
!
!--
BEGIN
EXTERNAL
CHAR_INFO : BLOCKVECTOR [256, 1], !Information about each character
CMD_END, ! End of command pointer
CMD_PTR; ! Command string pointer
LOCAL
KW_POINTER,
FIRST_CHAR,
TABLE_OFFSET,
FOUND,
TABLE,
TABLE_PTR : REF BLOCK [ ] FIELD (KEY_WORD_FIELD),
C_POINTER;
.KEY_NUM = 0;
C_POINTER = .CMD_PTR;
FIRST_CHAR = CH$RCHAR_A (C_POINTER);
IF .CHAR_INFO [.FIRST_CHAR, CI_LC] THEN FIRST_CHAR = .FIRST_CHAR - %C'a' + %C'A';
CASE .TABLE_NO FROM 1 TO 2 OF
SET
[1] :
BEGIN
IF ((.FIRST_CHAR LSS %C'A') OR (.FIRST_CHAR GTR %C'^')) THEN RETURN;
TABLE = VERB_TABLE;
TABLE_OFFSET = (.FIRST_CHAR - %C'A');
TABLE_PTR = .(.TABLE + .TABLE_OFFSET) + ADDR_BASE;
END;
[2] :
BEGIN
IF ((.FIRST_CHAR LSS %C'B') OR (.FIRST_CHAR GTR %C'W')) THEN RETURN;
TABLE = ENTITY_TABLE;
TABLE_OFFSET = (.FIRST_CHAR - %C'B');
TABLE_PTR = .(.TABLE + .TABLE_OFFSET) + ADDR_BASE;
END;
[OUTRANGE] :
ASSERT (0);
TES;
WHILE (.TABLE_PTR [KEY_WORD_LEN] NEQ 0) DO
BEGIN
KW_POINTER = .TABLE_PTR [KEY_WORD_POINTER];
C_POINTER = .CMD_PTR;
FOUND = 1;
IF CH$PTR_LEQ (CH$PLUS (.C_POINTER, .TABLE_PTR [KEY_WORD_LEN]), .CMD_END)
THEN
BEGIN
INCR I FROM 1 TO .TABLE_PTR [KEY_WORD_LEN] DO
BEGIN
LOCAL
CHAR;
CHAR = CH$RCHAR_A (C_POINTER);
IF .CHAR_INFO [.CHAR, CI_LC] THEN CHAR = .CHAR - %C'a' + %C'A';
IF (.CHAR NEQ CH$RCHAR_A (KW_POINTER)) THEN FOUND = 0;
END;
IF .FOUND
THEN
BEGIN
.KEY_NUM = .TABLE_PTR [KEY_WORD_NUM];
!+
! Skip over the keyword.
!-
CMD_PTR = CH$PLUS (.CMD_PTR, .TABLE_PTR [KEY_WORD_LEN]);
RETURN;
END;
END;
TABLE_PTR = .TABLE_PTR [KEY_WORD_NEXT] + ADDR_BASE;
END;
RETURN;
END;
END
ELUDOM