Trailing-Edge
-
PDP-10 Archives
-
BB-H138E-BM
-
6-1-sources/input.bli
There are 10 other files named input.bli in the archive. Click here to see a list.
%TITLE 'INPUT - read a line of input'
MODULE INPUT ( ! Read a line of input
IDENT = '3-009' ! File: INPUT.BLI Edit: CJG3009
) =
BEGIN
!
! COPYRIGHT (c) 1981, 1985 BY
! DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
! ALL RIGHTS RESERVED.
!
! THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
! ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
! INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
! COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
! OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
! TRANSFERRED.
!
! THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
! AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
! CORPORATION.
!
! DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
! SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
!
!++
! FACILITY: EDT -- The DEC Standard Editor
!
! ABSTRACT:
!
! This module is called whenever an input line is required for a
! command or an insert. This module handles fetching of lines
! from macros or from the initialization file.
!
! ENVIRONMENT: User mode, sharable
!
! AUTHOR: Bob Kushlis, CREATION DATE: 4-Feb-1979
!
! MODIFIED BY:
!
! Dan Szymanski, 17-NOV-80, 02
! Change to EDT$$GET_LN so that a line of input from the terminal
! which consists of only the two characters ^z or ^Z are not
! considered to be an end-of-file.
! 2-003 - Regularized headers. JBS 24-Feb-1981
! 2-004 - Fix module name. JBS 06-Mar-1981
! 2-005 - Use the ASSERT macro. JBS 01-Jun-1981
! 2-006 - Remove explicit journaling. JBS 22-Jun-1981
! 2-007 - Use new journaling interface. JBS 08-Jul-1981
! 2-008 - Separate reading of the startup file from reading of the journal file.
! JBS 16-Aug-1981
! 2-009 - Make command file i/o use EDT$FILEIO. STS 25-Dec-1981
! 2-010 - Remove DSC$A_POINTER macro STS 14-Jan-1982
! 2-011 - Convert reads and writes to use EDT$FILEIO. STS 15-Jan-1981
! 2-012 - Add rhb_descriptor. STS 21-Jan-1982
! 2-013 - Remove reference to sys_cmdrab. STS 10-Feb-1982
! 2-014 - Add literals for callable parameters. STS 08-Mar-1982
! 2-015 - Add JOU_VALID. JBS 09-Apr-1982
! 2-016 - Make sure an insert line terminated by ^Z gets journalled. STS 24-Jun-1982
! 3-001 - Make all quoted string arguments %C so they are right justified. GB 09-Feb-1983
! 3-002 - Put the command in the rescan buffer if the parser will be called
! next. In terminal mode - don't do anything. CJG Ides of March, 1983
! 3-003 - Don't need RHB code on TPS20. CJG 19-Apr-1983
! 3-004 - Add updates from V3 kit. GB 27-Apr-1983
! 3-005 - Remove call to EDT$$CALLFIO. CJG 10-Jun-1983
! 3-006 - Modify to use EDT$$TI_BUFSTR for journalling. CJG 15-Jun-1983
! 3-007 - Scan input from command file for nulls and convert to ^_ which the
! parser can understand. CJG 8-Nov-1983
! 3-008 - Make sure that Control-H works in the main parser. CJG 20-Dec-1983
! 3-009 - Modify ASSERT macro to include error code. CJG 30-Jan-1984
!--
%SBTTL 'Declarations'
!
! TABLE OF CONTENTS:
!
REQUIRE 'EDTSRC:TRAROUNAM';
FORWARD ROUTINE
EDT$$GET_LN;
!
! INCLUDE FILES:
!
REQUIRE 'SYS:JSYS';
REQUIRE 'EDTSRC:EDTREQ';
!
! MACROS:
!
!
! EQUATED SYMBOLS:
!
EXTERNAL LITERAL
EDT$K_GET,
EDT$K_COMMAND_FILE;
!
! OWN STORAGE:
!
! NONE
!
! EXTERNAL REFERENCES:
!
EXTERNAL
CMD_BUF,
CMD_LEN,
CMD_END,
CMD_PTR,
TEMP_BUFFER,
SAV_CNT,
RCOV_MOD,
INP_SRC,
MAC_BUF,
CUR_BUF,
VFY,
EOB_LN,
WK_LN : REF LIN_BLOCK,
JOU_VALID; ! 1 = journal record is valid
EXTERNAL ROUTINE
EDT$FILEIO,
EDT$$RD_JOUTXT, ! Read a text line from the journal file
EDT$$TI_BUFCH : NOVALUE, ! Put a character in the journal file buffer
EDT$$TI_BUFSTR : NOVALUE, ! Put a string in the journal file
EDT$$TI_FLUSHJOUFI : NOVALUE, ! Write out journal file buffer
EDT$$TI_WRLN,
EDT$$RD_CMDLN,
EDT$$RD_CURLN,
EDT$$RD_NXTLN;
%SBTTL 'EDT$$GET_LN - return a line'
GLOBAL ROUTINE EDT$$GET_LN ( ! Return a line
PARSE, ! 1=parser will be called next
PROMPT, ! Address of the prompt
PR_LEN ! Length of the prompt
) =
!++
! FUNCTIONAL DESCRIPTION:
!
! This routine returns a line from the current macro or from the
! terminal or command file.
!
! FORMAL PARAMETERS:
!
! PROMPT The address of a prompt string for terminal input
!
! PR_LEN The length of the prompt
!
!
! IMPLICIT INPUTS:
!
! INP_SRC - tells where the input line will come from.
! RCOV_MOD
! WK_LN
! MAC_BUF
! VFY
!
! IMPLICIT OUTPUTS:
!
! CMD_BUF
! CMD_LEN
! CUR_BUF
! CMD_END
! CMD_PTR
! JOU_VALID
!
! COMPLETION CODES:
!
! 0 - No eof occured on this line
! 1 - An eof did occur
!
! SIDE EFFECTS:
!
! NONE
!
!--
BEGIN
LOCAL
FILE_DESC : BLOCK [1],
EOF;
FILE_DESC [DSC$A_POINTER] = 0;
FILE_DESC [DSC$W_LENGTH] = 0;
EOF = 0;
CASE .INP_SRC FROM INP_TERM TO INP_JOURNAL OF
SET
[INP_TERM] :
!+
! Input is coming from the terminal (or command procedure)
!-
BEGIN
!+
! Since we are about to read from the terminal, make sure the last
! line has been written to the journal file.
!-
EDT$$TI_FLUSHJOUFI (%C'T');
IF (NOT .PARSE) THEN
BEGIN
EOF = EDT$$RD_CMDLN (.PROMPT, .PR_LEN, CMD_BUF, CMD_LEN, 255);
!+
! Put the new line in the journal file buffer.
!-
EDT$$TI_BUFSTR (CH$PTR (CMD_BUF,, BYTE_SIZE), .CMD_LEN);
IF .EOF
THEN
BEGIN
EDT$$TI_BUFCH (%C'^');
EDT$$TI_BUFCH (%C'Z');
END;
!+
! Even if we put no characters into the journal record (because the line
! is empty) it is important to output the record next time around, since
! an empty record changes the current line.
!-
JOU_VALID = 1;
END;
END;
[INP_JOURNAL] :
!+
! Input is coming from the journal file.
!-
BEGIN
ASSERT (13, .RCOV_MOD);
IF EDT$$RD_JOUTXT (CMD_BUF, CMD_LEN)
THEN
EDT$$TI_WRLN (CMD_BUF, .CMD_LEN)
ELSE
BEGIN
EOF = 1;
CMD_LEN = 0;
END
END;
[INP_COMMAND] :
!+
! Input is coming from the startup file.
!-
BEGIN
LOCAL
C,
P1,
P2,
STATUS;
STATUS = EDT$FILEIO (EDT$K_GET, EDT$K_COMMAND_FILE, FILE_DESC);
IF .STATUS
THEN
BEGIN
CMD_LEN = .FILE_DESC [DSC$W_LENGTH];
P1 = CH$PTR (.FILE_DESC [DSC$A_POINTER],, BYTE_SIZE);
P2 = CH$PTR (CMD_BUF,, BYTE_SIZE);
!+
!Scan through the command line looking for nulls. Convert these to ^_ for
!the parser.
!-
INCR I FROM 1 TO .CMD_LEN DO
BEGIN
C = CH$RCHAR_A (P1);
IF (.C EQL 0) THEN C = %O'37';
CH$WCHAR_A (.C, P2);
END;
END
ELSE
BEGIN
EOF = 1;
CMD_LEN = 0;
END;
END;
[INP_MACRO] :
BEGIN
LOCAL
SAVE_TBCB;
SAVE_TBCB = .CUR_BUF;
CUR_BUF = .MAC_BUF;
EDT$$RD_CURLN ();
IF (.WK_LN NEQA EOB_LN )
THEN
BEGIN
CH$MOVE (.WK_LN [LIN_LENGTH], CH$PTR (WK_LN [LIN_TEXT],, BYTE_SIZE),
CH$PTR ( CMD_BUF,, BYTE_SIZE));
CMD_LEN = .WK_LN [LIN_LENGTH];
EDT$$RD_NXTLN ()
END
ELSE
BEGIN
EOF = 1;
CMD_LEN = 0;
END;
CUR_BUF = .SAVE_TBCB;
EDT$$RD_CURLN ();
END;
[INRANGE, OUTRANGE] :
ASSERT (9, 0);
TES;
!+
! If input is coming from a file see if the line ended with ^Z or EOF found.
!-
IF ((.INP_SRC NEQ INP_TERM) AND ( NOT .EOF)) THEN
BEGIN
IF CH$EQL (2, CH$PTR (CMD_BUF, .CMD_LEN - 2, BYTE_SIZE),
2, CH$PTR (UPLIT (%STRING('^Z'))))
THEN
BEGIN
CMD_LEN = .CMD_LEN - 2;
EOF = 1;
END;
IF .VFY THEN EDT$$TI_WRLN (CMD_BUF, .CMD_LEN);
IF .PARSE THEN
BEGIN
LOCAL
PTR;
!+
! If the data is required for the parser, then copy the command to the rescan
! buffer (unless its from the terminal). The string must be terminated by
! <CR><LF><NUL> for this to work.
!-
PTR = CH$MOVE (.CMD_LEN, CH$PTR (CMD_BUF,, BYTE_SIZE),
CH$PTR (TEMP_BUFFER,, BYTE_SIZE));
PTR = CH$MOVE (3, CH$PTR (UPLIT (%STRING (%CHAR (ASC_K_CR, ASC_K_LF, 0)))), .PTR);
_RSCAN (CH$PTR (TEMP_BUFFER,, BYTE_SIZE));
_RSCAN ($RSINI);
END;
END;
CMD_END = CH$PTR (CMD_BUF, .CMD_LEN, BYTE_SIZE);
CMD_PTR = CH$PTR (CMD_BUF,, BYTE_SIZE);
RETURN (.EOF);
END;
END
ELUDOM