Trailing-Edge
-
PDP-10 Archives
-
BB-H138E-BM
-
galaxy-sources/oprcmd.mac
There are 40 other files named oprcmd.mac in the archive. Click here to see a list.
TITLE OPRCMD - command tables for ORION
SUBTTL Preliminaries
;
;
; COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION
; 1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED
; AND COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE
; AND WITH THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS
; SOFTWARE OR ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR
; OTHERWISE MADE AVAILABLE TO ANY OTHER PERSON. NO TITLE TO
; AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE
; WITHOUT NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT
; BY DIGITAL EQUIPMENT CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY
; OF ITS SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY
; DIGITAL.
SALL
SEARCH GLXMAC
SEARCH ORNMAC
SEARCH MONSYM,MACSYM
PROLOG(OPRCMD)
;Version numbers
CMDMAN==:147 ;Maintenance edit number
CMDDEV==:200 ;Development edit number
VERSIN (CMD) ;Generate edit number
.DIRECTIVE FLBLST
INTERN OPRCMD ;MAKE VECTOR ADDRESS AVAILABLE
OPRCMD: EXP 2 ;SIZE
EXP INITCM ;POINTER TO THE INI FUNCTION
EXP CMDFDB ;TOP LEVEL DISPATCH
SUBTTL Table of Contents
; Table of Contents for OPRCMD
;
;
; Section Page
; 1. Preliminaries. . . . . . . . . . . . . . . . . . . . . 1
; 2. Table of Contents. . . . . . . . . . . . . . . . . . . 2
; 3. Revision history . . . . . . . . . . . . . . . . . . . 3
; 4. Special Macro Definitions. . . . . . . . . . . . . . . 4
; 5. $UNIT Macro. . . . . . . . . . . . . . . . . . . . . . 4
; 6. $STNUM Macro . . . . . . . . . . . . . . . . . . . . . 4
; 7. $STREAM Macro. . . . . . . . . . . . . . . . . . . . . 4
; 8. $EXPL Macro Definition . . . . . . . . . . . . . . . . 5
; 9. $URANGE Macro Definition . . . . . . . . . . . . . . . 6
; 10. $SRANGE Macro Definition . . . . . . . . . . . . . . . 6
; 11. Subroutine macros. . . . . . . . . . . . . . . . . . . 7
; 12. Command Dispatch . . . . . . . . . . . . . . . . . . . 8
; 13. Argument Subroutines . . . . . . . . . . . . . . . . . 9
; 14. START command tables . . . . . . . . . . . . . . . . . 10
; 15. CONTINUE command tables. . . . . . . . . . . . . . . . 11
; 16. SHUTDOWN command tables. . . . . . . . . . . . . . . . 11
; 17. STOP command tables. . . . . . . . . . . . . . . . . . 12
; 18. ABORT command tables . . . . . . . . . . . . . . . . . 13
; 19. HOLD command tables. . . . . . . . . . . . . . . . . . 14
; 20. RELEASE command tables . . . . . . . . . . . . . . . . 14
; 21. DEFINE command tables. . . . . . . . . . . . . . . . . 15
; 22. CANCEL command tables. . . . . . . . . . . . . . . . . 16
; 23. MODIFY command tables. . . . . . . . . . . . . . . . . 17
; 24. SHOW command tables. . . . . . . . . . . . . . . . . . 18
; 25. SHOW STATUS command tables . . . . . . . . . . . . . . 20
; 26. SHOW SYSTEM-LIST command tables. . . . . . . . . . . . 21
; 27. LOCK/UNLOCK command tables . . . . . . . . . . . . . . 22
; 28. SHWNOD . . . . . . . . . . . . . . . . . . . . . . . . 23
; 29. RESPOND command tables . . . . . . . . . . . . . . . . 24
; 30. REQUEUE command tables . . . . . . . . . . . . . . . . 25
; 31. BACKSPACE command tables . . . . . . . . . . . . . . . 26
; 32. FORWARDSPACE command tables. . . . . . . . . . . . . . 26
; 33. ALIGN command table. . . . . . . . . . . . . . . . . . 27
; 34. SUPPRESS command tables. . . . . . . . . . . . . . . . 28
; 35. ROUTE command tables . . . . . . . . . . . . . . . . . 29
; 36. SEND command tables. . . . . . . . . . . . . . . . . . 30
; 37. SET command tables . . . . . . . . . . . . . . . . . . 32
; 38. SET STRUCTURE command tables . . . . . . . . . . . . . 33
; 39. SET TAPE command tables. . . . . . . . . . . . . . . . 34
; 40. SET DISK command tables. . . . . . . . . . . . . . . . 35
; 41. SET ONLINE command tables. . . . . . . . . . . . . . . 36
; 42. SET USAGE command tables . . . . . . . . . . . . . . . 37
; 43. SET TAPE INITIALIZE command tables . . . . . . . . . . 38
; 44. SET NODE command tables. . . . . . . . . . . . . . . . 39
; 45. SET SCHEDULER command tables (TOPS20). . . . . . . . . 40
; 46. SET PORT command tables. . . . . . . . . . . . . . . . 41
; 47. ENABLE/DISABLE command tables. . . . . . . . . . . . . 42
; 48. ENACLS . . . . . . . . . . . . . . . . . . . . . . . . 44
; 49. CLOSE command tables . . . . . . . . . . . . . . . . . 45
; 50. DEFINE command tables. . . . . . . . . . . . . . . . . 45
; 51. REPORT command tables. . . . . . . . . . . . . . . . . 46
; 52. MOUNT command tables (TOPS10). . . . . . . . . . . . . 47
; 53. NEXT - NEXT COMMAND. . . . . . . . . . . . . . . . . . 48
; 54. IDENTIFY command tables. . . . . . . . . . . . . . . . 49
; 55. SWITCH . . . . . . . . . . . . . . . . . . . . . . . . 50
; 56. DISMOUNT command tables. . . . . . . . . . . . . . . . 51
; 57. UNLOAD . . . . . . . . . . . . . . . . . . . . . . . . 51
; 58. RECOGNIZE command tables . . . . . . . . . . . . . . . 51
; 59. PUSH command tables. . . . . . . . . . . . . . . . . . 52
; 60. HELP command tables. . . . . . . . . . . . . . . . . . 53
; 61. SHOW ALLOCATION command tables . . . . . . . . . . . . 54
SUBTTL Revision history
COMMENT \
***** Release 4.2 -- begin maintenance edits *****
146 4.2.1484 9-Aug-82
Allow secondary ports to work on MODIFY commands.
147 4.2.1555 24-Oct-83
Add some range checking stuff to prevent too many objects at
a time from being started.
***** Release 5.0 -- begin development edits *****
160 5.1003 4-Jan-83
Move to new development area. Add version vector. Clean up
edit organization. Update TOC.
161 5.1021 5-Apr-83
Add SET STR SHARED/EXCLUSIVE. Add SET PORT CI ONLINE/OFFLINE.
162 5.1026 6-May-83
Add new ENABLE/DISABLE OUTPUT options for BUGCHK, BUGINF and SYSTEM
messages.
163 5.1027 10-May-83
Change SET PORT CI ONLINE/OFFLINE to AVAILABLE/UNAVAILABLE.
164 5.1035 18-Jul-83
Add support for new DISMOUNT (with) REMOVAL/NOREMOVAL. While here,
clearify a SET ONLINE help message.
165 5.1058 23-Nov-83
Make the SET TERMINAL command invisible for this release. Remove
it in next release.
166 5.1069 23-Jan-84
Add SHOW STATUS STRUCTURE command.
167 5.1075 3-Feb-84
Add structure name to SHOW STATUS STRUCTURE command if desired.
170 5.1080 5-Feb-84
Add UNDEFINE STRUCTURE FOO: command.
171 5.1111 1-Mar-84
Add MOUNT STRUCTURE alias: /STRUCTURE-ID:structure name command
172 5.1124 2-Apr-84
Add controller number to the SET DISK UNAVAILABLE.
173 5.1162 21-Sep-84
Add changes to support SNA Workstations
174 5.1169 19-Oct-84
Correct problems due to new SNA Workstations functionality.
175 5.1179 20-Nov-84
Add support to allow disabling/enabling of two new display types,
DECNET-EVENT messages and DECNET-LINK messages.
176 5.1184 3-Dec-84
Include an additional argument in the "X" macro - used in conjunction
with LCPTAB support.
177 5.1186 5-Dec-84
Add NI AVAILABLE/UNAVAILABLE.
200 5.1203 26-Feb-85
Add support for SHOW CONFIGURATION DISK-DRIVE.
\ ;End of Revision History
SUBTTL Special Macro Definitions
SUBTTL $UNIT Macro
SUBTTL $STNUM Macro
SUBTTL $STREAM Macro
; !=======================================================!
; ! $UNIT (NEXT_PDB) !
; !-------------------------------------------------------!
; ! PARSE A UNIT NUMBER ONLY !
; !=======================================================!
;DEFINE A MACRO TO DO THE PARSING FOR A SINGLE UNIT NUMBER
DEFINE $UNIT(NEXT,%UNI01,%UNI02),<
.XCREF %UNI01,%UNI02
SUPPRESS %UNI01,%UNI02
$NOISE (%UNI01,<unit number>)
%UNI01: $NUMBER (%UNI02,^D10,<unit number (/NODE:)>,<$ACTION(CHKVAL)>)
%UNI02: $NODE(NEXT)
> ;END $UNIT DEFINITION
; !=======================================================!
; ! $STNUM (NEXT_PDB) !
; !-------------------------------------------------------!
; ! PARSE A STREAM NUMBER ONLY !
; !=======================================================!
;DEFINE A MACRO TO DO THE PARSING FOR A SINGLE STREAM NUMBER
;WITHOUT AN OPTIONAL NODE SPECIFICATION
DEFINE $STNUM(NEXT,%STN01),<
.XCREF %STN01
SUPPRESS %STN01
$NOISE (%STN01,<stream number>)
%STN01: $NUMBER (NEXT,^D10,<stream number>,$ACTION(CHKVAL))
> ;END $STNUM DEFINITION
; !=======================================================!
; ! $STREAM (NEXT_PDB) !
; !-------------------------------------------------------!
; ! PARSE A STREAM WITH OPTIONAL NODE !
; !=======================================================!
;DEFINE A MACRO TO DO THE PARSING FOR A SINGLE STREAM NUMBER
DEFINE $STREAM(NEXT,%STR01,%STR02),<
.XCREF %STR01,%STR02
SUPPRESS %STR01,%STR02
$NOISE (%STR01,<stream number>)
%STR01: $NUMBER (%STR02,^D10,<stream number (/NODE:)>,$ACTION(CHKVAL))
%STR02: $NODE(NEXT)
> ;END $STREAM DEFINITION
SUBTTL $EXPL Macro Definition
; !=======================================================!
; ! $EXPL (NEXT_PDB,<KEYWORD-LIST>) !
; !-------------------------------------------------------!
; ! /REASON:TEXT !
; !=======================================================!
;DEFINE A <EXPL> DEFINITION MACRO
DEFINE $EXPL (NXTLNK,ALTADR,%A,%B,%C)<
.XCREF %A,%B,%C
SUPPRESS %A,%B,%C
$SWITCH(%B,%A,ALTADR)
%A: $STAB
ORNSWI (<REASON:>,RSN)
$ETAB
%B: $CRLF (<$ALTER(%C),$ACTION(TXTLIN##),$HELP(<confirm for multiple line response>)>)
%C: $CTEXT (CONFRM,<single line response>)
>
SUBTTL $URANGE Macro Definition
SUBTTL $SRANGE Macro Definition
; !=======================================================!
; ! $URANGE (NEXT_PDB) !
; !-------------------------------------------------------!
; ! PARSE A UNIT RANGE WITH OPTIONAL NODE !
; !=======================================================!
;DEFINE A MACRO TO DO THE PARSING FOR A RANGE OF UNIT NUMBERS
DEFINE $URANGE(NEXT,%URG01,%URG02),<
.XCREF %URG01,%URG02
SUPPRESS %URG01,%URG02
$NOISE (%URG01,<unit number>)
%URG01: $ORANGE(%URG02,<number or range (n:m)(/NODE:)>)
%URG02: $NODE(NEXT)
> ;END $URANGE DEFINITION
; !=======================================================!
; ! $SRANGE (NEXT_PDB) !
; !-------------------------------------------------------!
; ! PARSE A STREAM RANGE WITH OPTIONAL NODE !
; !=======================================================!
;DEFINE A MACRO TO DO THE PARSING FOR A RANGE OF STREAM NUMBERS
DEFINE $SRANGE(NEXT,%SRG01,%SRG02),<
.XCREF %SRG01,%SRG02
SUPPRESS %SRG01,%SRG02
$NOISE (%SRG01,<stream number>)
%SRG01: $ORANGE(%SRG02,<number or range (n:m)(/NODE:)>)
%SRG02: $NODE(NEXT)
> ;END $SRANGE DEFINITION
SUBTTL Subroutine macros
;DEFINE A MACRO TO ACTUALLY PARSE A RANGE OF OCTAL NUMBERS SPECIFIED AS
; NUMBER:NUMBER (OR JUST NUMBER) WITH AN OPTIONAL NODE SWITCH
DEFINE $RANGE(NEXT,HLPT,ARGLST,%RNG01,%RNG02),<
.XCREF %RNG01,%RNG02
SUPPRESS %RNG01,%RNG02
$NUMBER (%RNG01,^D10,HLPT,<$ACTION(STOBTH),ARGLST>)
%RNG01: $TOKEN (%RNG02,<:>,<$HELP(<colon to specify a range>),$ALTERNATE(NEXT)>)
%RNG02: $NUMBER (NEXT,^D10,,<$ACTION(STOHGH)>)
> ;END DEFINITION OF $RANGE
;$ORANGE (that's O-RANGE, not the citrus fruit!) is the same as $RANGE with
;one difference, the range itself is checked for width using routine STOOHG
;instead of STOHGH.
DEFINE $ORANGE(NEXT,HLPT,ARGLST,%ORG01,%ORG02),<
.XCREF %ORG01,%ORG02
SUPPRESS %ORG01,%ORG02
$NUMBER (%ORG01,^D10,HLPT,<$ACTION(STOBTH),ARGLST>)
%ORG01: $TOKEN (%ORG02,<:>,<$HELP(<colon to specify a range>),$ALTERNATE(NEXT)>)
%ORG02: $NUMBER (NEXT,^D10,,<$ACTION(STOOHG)>)
> ;END DEFINITION OF $ORANGE
;DEFINE A MACRO FOR CORRECT PARSING OF THE OPTIONAL /NODE SWITCH
DEFINE $NODE(NEXT,%NOD01,%NOD02),<
.XCREF %NOD01,%NOD02
SUPPRESS %NOD01,%NOD02
$SWITCH (%NOD02,%NOD01,<$ALTERNATE(NEXT)>)
%NOD01: $STAB
ORNSWI(NODE:,NOD)
$ETAB
%NOD02: $NODNM (NEXT,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
> ;END $NODE DEFINITION
SUBTTL SNADST Macro Definition
; SNADST (next-pdb) - Parse destination field for SNA Workstation line printer
; or card punch stream
DEFINE SNADST (NEXT,%A,%B,%C,%D,%E,%F), <
$CTEXT(%A,<node"user password account"::dev:[directory]>,<$FLAGS(CM%BRK),$BREAK(DSTBRK)>)
%A: $SWIDSP (%D,<$ALTERNATE(NEXT)>)
%B: $SWIDSP (%E,<$ALTERNATE(NEXT)>)
%C: $SWIDSP (%F,<$ALTERNATE(NEXT)>)
%D: $STAB
DSPTAB (%B,.SWNTL,<NOTRANSLATE>)
DSPTAB (%C,.SWSPL,<SPOOL>)
$ETAB
%E: $STAB
DSPTAB (NEXT,.SWSPL,<SPOOL>)
$ETAB
%F: $STAB
DSPTAB (NEXT,.SWNTL,<NOTRANSLATE>)
$ETAB
IF2 <PURGE %A,%B,%C,%D,%E,%F>
> ;End of SNADST macro definition
DSTBRK: BRMSK. (EOLB0.,EOLB1.,EOLB2.,EOLB3.,,</>) ;Break set
SUBTTL Command Dispatch
INITCM:: $INIT(CMDFDB)
CMDFDB:: $KEYDSP(CMDTAB,<$ACTION(CMDACT##),$ERROR(BADCOM)>)
CMDTAB: $STAB
TOPS10< ORNDSP(,\"32,CTZ,CM%INV) >
ORNDSP(ABOFDB,ABORT,CNC)
ORNDSP(ALIFDB,ALIGN,ALI)
ORNDSP(BKSFDB,BACKSPACE,BKS)
ORNDSP(CANFDB,CANCEL,DEL)
ORNDSP(CLOFDB,CLOSE,CLO)
ORNDSP(UNVFDB,CONTINUE,CNT)
IFN FTDN60,<
ORNDSP(DEFFDB,DEFINE,DEF)
>;END FTDN60
ORNDSP(ENAFDB,DISABLE,DIS)
ORNDSP(DSMFDB,DISMOUNT,DSM)
ORNDSP(ENAFDB,ENABLE,ENA)
IFN NUMAPL,< ;CHECK IS ANY APPLICATION TABLES
ORNDSP(ENTFDB##,ENTER,ENT)
>;END NUMAPL
ORNDSP(EXTFDB##,EXIT,EXT)
ORNDSP(BKSFDB,FORWARDSPACE,FWS)
ORNDSP(HLPFDB,HELP,HLP)
ORNDSP(HLDFDB,HOLD,HLD)
ORNDSP(IDNFDB,IDENTIFY,IDN)
TOPS10< ORNDSP(LOCFDB,LOCK,LOC)>
ORNDSP(MODFDB,MODIFY,MOD)
ORNDSP(MTNFDB,MOUNT,MTN)
ORNDSP(NXTFDB,NEXT,NXT) ;[NXT] Operator NEXT command
TOPS20< ORNDSP(PUSFDB,PUSH,PUS)>
TOPS10< ORNDSP(RECFDB,RECOGNIZE,REC)>
ORNDSP(HLDFDB,RELEASE,REL)
ORNDSP(RPTFDB,REPORT,RPT)
ORNDSP(REQFDB,REQUEUE,REQ)
ORNDSP(RSPFDB,RESPOND,RSP)
ORNDSP(RTEFDB,ROUTE,RTE)
ORNDSP(SNDFDB,SEND,SND)
ORNDSP(SETFDB,SET,SET)
ORNDSP(SHWFDB,SHOW,SHW)
ORNDSP(SHDFDB,SHUTDOWN,SHD)
ORNDSP(STAFDB,START,STA)
ORNDSP(STPFDB,STOP,PAU)
ORNDSP(SUPFDB,SUPPRESS,SUP)
TOPS20< ORNDSP(SWIFDB,SWITCH,SWI)>
ORNDSP(TAKOPR##,TAKE,TAK)
ORNDSP(UNDFDB,UNDEFINE,UDF)
ORNDSP(WAIOPR##,WAIT,WAI)
$ETAB
BADCOM: MOVEI S2,[ASCIZ/Invalid OPR command specified/]
$RETF ;BAD COMMAND
SUBTTL Argument Subroutines
;ACTION ROUTINE CALLED ON $UNIT MACRO TO BARF ON NEGATIVE UNIT
;NUMBER ARGUMENTS.
CHKVAL: SKIPL CR.RES(S2) ;CHECK THAT NUMBER
$RETT ;IT'S GOOD
PUSHJ P,FIXIT
MOVEI S2,[ASCIZ/Negative number improper/]
$RETF
CHKPOS: SKIPLE CR.RES(S2) ;CHECK THE NUMBER
$RETT ;O.K..RETURN
PUSHJ P,FIXIT ;FIXUP COMMAND
MOVEI S2,[ASCIZ/Number must be positive/]
$RETF ;RETURN FALSE
; ACTION ROUTINE TO CHECK PRIORITY RANGES
CHKPRI: SKIPLE T1,CR.RES(S2) ;CHECK THAT NUMBER
CAILE T1,^D63
SKIPA
$RETT ;IT'S GOOD
PUSHJ P,FIXIT
MOVEI S2,[ASCIZ/Priority not in range/]
$RETF
;TEMPORARY STORAGE FOR RANGE ARGUMENT
$DATA LSTARG,1 ;LAST PARSED ARGUMENT ADDRESS
$GDATA CMDCOD,1 ;COMMAND FUNCTION CODE
STOBTH: SKIPGE T1,CR.RES(S2)
PJRST CHKVAL ;ABORT COMMAND
MOVEM T1,LSTARG
$RETT
; Routine STOOHG to check width of range for object commands as well as
; the stuff checked by STOHGH.
STOOHG: SKIPGE T1,CR.RES(S2) ;Is the range at least positive?
PJRST CHKVAL ;No, abort command
SUB T1,LSTARG ;Subtract the beginning of range
JUMPL T1,STOH.1 ;Bad range
CAIGE T1,MXOBJR ;Too big?
$RETT ;Just fine
JRST STOH.1 ;Bad range
; Action routine STOHGH to check range validity based on bottom and top
; of range.
STOHGH: SKIPGE T1,CR.RES(S2)
PJRST CHKVAL ;ABORT COMMAND
CAMGE T1,LSTARG
SKIPA ;SKIP AND LOAD ERROR
$RETT
STOH.1: PUSHJ P,FIXIT
MOVEI S2,[ASCIZ /Improper range specification/]
$RETF
FIXIT: HRRZ T4,CR.FLG(S2) ;GET ADR OF CMDBLK
MOVE T1,.CMPTR(T4) ;GET COMMAND POINTER
MOVE T2,.CMABP(T4) ;GET BP TO ATOM BUFFER
FIXI.1: ILDB T3,T2
JUMPE T3,FIXI.2 ;DONE.. ALL FIXED UP
PUSHJ P,DBP ;DECREMENT THE BP
AOS .CMCNT(T4)
JRST FIXI.1 ;TRY NEXT CHARACTER
FIXI.2: MOVEM T1,.CMPTR(T4) ;STORE ADJUSTED BP
POPJ P,0
;LOCAL ROUTINE TO DECREMENT BYTE POINTER IN T1
DBP: SOS T1
IBP T1
IBP T1
IBP T1
IBP T1
$RETT
SUBTTL START command tables
STAFDB: $NOISE (STAF01,<object>)
STAF01: $KEYDSP(STAF02)
STAF02: $STAB
ORNDSP(STAF03,BATCH-STREAM,BAT)
ORNDSP(STAF04,<CARD-PUNCH>,CDP)
IFN FTFTS,<
ORNDSP(STAF03,<FAL-STREAM>,FAL)
ORNDSP(STAF03,<FTS-STREAM>,FTS)
> ;End FTFTS conditional
ORNDSP(SHD030,<NODE>,NOD)
ORNDSP(STAF04,<PAPER-TAPE-PUNCH>,PTP)
ORNDSP(STAF04,<PLOTTER>,PLT)
ORNDSP(STAF11,PRINTER,LPT)
ORNDSP(STAF04,READER,RDR)
$ETAB
STAF03: $SRANGE(CONFRM)
STAF04: $URANGE (CONFRM)
STAF11: $URANGE(STAF12)
STAF12: $SWITCH (STAF14,STAF13,<$ALTERNATE(<CONFRM>)>)
STAF13: $STAB
ORNSWI (<DEVICE:>,DEV)
$ETAB
STAF14: $DEV(CONFRM,<$HELP(<tape drive name>)>)
SUBTTL CONTINUE command tables
SUBTTL SHUTDOWN command tables
COMMENT \
NOTE: SHOULD IT BECOME DESIRABLE FOR THE SHUTDOWN AND
CONTINUE COMMANDS TO BE NO LONGER SYNTACTICALLY IDENTICAL THEN THE
COMMON USE OF THIS PDB CHAIN DEFINITION IS NO LONGER VALID.
\
SHDFDB: $NOISE (SHD010,<scheduling for>)
UNVFDB: $NOISE (UNVF01,<object>)
UNVF01: $KEYDSP(UNVF02)
UNVF02: $STAB
ORNDSP(UNVF03,BATCH-STREAM,BAT)
ORNDSP(UNVF04,<CARD-PUNCH>,CDP)
IFN FTFTS,<
ORNDSP(UNVF03,<FAL-STREAM>,FAL)
ORNDSP(UNVF03,<FTS-STREAM>,FTS)
> ;End FTFTS conditional
ORNDSP(UNVF04,<PAPER-TAPE-PUNCH>,PTP)
ORNDSP(UNVF04,<PLOTTER>,PLT)
ORNDSP(UNVF04,PRINTER,LPT)
ORNDSP(UNVF04,READER,RDR)
$ETAB
UNVF03: $SRANGE(CONFRM)
UNVF04: $URANGE(CONFRM)
CONFRM: $CRLF
SHD010: $KEYDSP(SHD020)
SHD020: $STAB
ORNDSP(UNVF03,BATCH-STREAM,BAT)
ORNDSP(UNVF04,<CARD-PUNCH>,CDP)
ORNDSP(SHD030,NODE,NOD)
ORNDSP(UNVF04,<PAPER-TAPE-PUNCH>,PTP)
ORNDSP(UNVF04,<PLOTTER>,PLT)
ORNDSP(UNVF04,PRINTER,LPT)
ORNDSP(UNVF04,READER,RDR)
$ETAB
SHD030: $NODNM(CONFRM,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
SUBTTL STOP command tables
STPFDB: $NOISE (STPF01,<object>)
STPF01: $KEYDSP(STPF02)
STPF02: $STAB
ORNDSP(STPS01,BATCH-STREAM,BAT)
ORNDSP(STPU01,<CARD-PUNCH>,CDP)
IFN FTFTS,<
ORNDSP(STPU01,<FTS-STREAM>,FTS)
> ;End FTFTS conditional
ORNDSP(STPU01,<PAPER-TAPE-PUNCH>,PTP)
ORNDSP(STPU01,<PLOTTER>,PLT)
ORNDSP(STPU01,PRINTER,LPT)
ORNDSP(STPU01,READER,RDR)
$ETAB
STPS01: $NOISE (STPN01,<stream number>)
STPU01: $NOISE (STPN01,<unit number>)
STPN01: $NUMBER (STPN02,^D10,<number or range (n:m)(/NODE:)>,<$ACTION(STOBTH)>)
STPN02: $TOKEN (STPN03,<:>,<$HELP(<colon to specify a range>),$DEFAULT(IMMEDIATELY),$ALTERNATE(STPN04)>)
STPN03: $NUMBER (STPN04,^D10,,<$ACTION(STOHGH)>)
STPN04: $SWITCH (STPN06,STPN05,<$ALTERNATE(STP010)>)
STPN05: $STAB
ORNSWI(NODE:,NOD)
$ETAB
STPN06: $NODNM (STP010,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
STP010: $KEYDSP (STP020,<$DEFAULT(<IMMEDIATELY>),$ALTERNATE(CONFRM)>)
STP020: $STAB
ORNDSP(STP030,<AFTER>,AFT)
ORNDSP(CONFRM,<IMMEDIATELY>,IMM)
$ETAB
STP030: $KEY(CONFRM,STP040)
STP040: $STAB
ORNKEY(<CURRENT-REQUEST>,ACR)
ORNKEY(<EVERY-REQUEST>,AER)
$ETAB
SUBTTL ABORT command tables
ABOFDB: $NOISE (ABO010,<current job on>)
ABO010: $KEYDSP (ABO020)
ABO020: $STAB
ORNDSP (ABO060,<BATCH-STREAM>,BAT)
ORNDSP (ABO030,<CARD-PUNCH>,CDP)
IFN FTFTS,<
ORNDSP (ABO060,<FAL-STREAM>,FAL)
ORNDSP (ABO060,<FTS-STREAM>,FTS)
> ;End FTFTS conditional
ORNDSP (ABO030,<PAPER-TAPE-PUNCH>,PTP)
ORNDSP (ABO030,<PLOTTER>,PLT)
ORNDSP (ABO030,<PRINTER>,LPT)
ORNDSP (ABO090,<READER>,RDR)
$ETAB
; Output device tables
;
ABO030: $UNIT (ABO040)
ABO040: $SWITCH (ABO100,ABO050,<$ALTERNATE(ABO100)>)
ABO050: $STAB
ORNSWI (<PURGE>,PUR)
$ETAB
; Batch tables
;
ABO060: $STREAM (ABO070)
ABO070: $SWITCH (ABO100,ABO080,<$ALTERNATE(ABO100),$DEFAULT(</ERROR-PROCESSING>)>)
ABO080: $STAB
ORNSWI (<ERROR-PROCESSING>,ERR)
ORNSWI (<NOERROR-PROCESSING>,NER)
ORNSWI (<PURGE>,PUR)
$ETAB
; Card reader tables
;
ABO090: $UNIT (ABO100)
ABO100: $EXPL (CONFRM,<$ALTER(CONFRM)>)
SUBTTL HOLD command tables
SUBTTL RELEASE command tables
HLDFDB: $KEY (HLD030,HLD010)
HLD010: $STAB
ORNKEY (<BATCH-JOBS>,BAT)
ORNKEY (<CARD-PUNCH-JOBS>,CDP)
IFN FTFTS,<
ORNKEY (<FTS-JOBS>,FTS)
> ;End FTFTS conditional
ORNKEY (<PAPER-TAPE-PUNCH-JOBS>,PTP)
ORNKEY (<PLOTTER-JOBS>,PLT)
ORNKEY (<PRINTER-JOBS>,LPT)
$ETAB
HLD030: $NUMBER(CONFRM,^D10,<request-id>,<$ACTION(CHKPOS),$ALTERNATE(HLD035)>)
HLD035: $USER(CONFRM,<$ALTERNATE(HLD040)>)
HLD040: $TOKEN(HLD050,<*>,<$HELP(<* to specify all requests>)>)
HLD050: $NODE(CONFRM)
SUBTTL DEFINE command tables
IFN FTDN60,<
DEFFDB: $KEY(DEF020,DEF010,<$DEFAULT(<NODE>)>)
DEF010: $STAB
ORNKEY(<NODE>,NOD)
$ETAB
DEF020: $NOISE(DEF030,<name>)
DEF030: $NODNM(DEF040,<node name for IBM emulation/termination>,<$FLAGS(CM%PO!CM%NSF)>)
DEF040: $NOISE(DEF050,<type>)
DEF050: $KEYDSP(DEF060,<$DEFAULT(<HASP>)>)
DEF060: $STAB
ORNDSP(DEF063,<2780>,278)
ORNDSP(DEF063,<3780>,378)
ORNDSP(DEF063,<HASP>,HSP)
ORNDSP(DEF140,<SNA-WORKSTATION>,SNA)
$ETAB
DEF063: $SWITCH (DEF070,DEF065,<$ALTERNATE(DEF080),$DEFAULT(</SIGNON-REQUIRED>)>)
DEF065: $STAB
ORNSWI(<NO-SIGNON-REQUIRED>,NSN)
ORNSWI(<SIGNON-REQUIRED>,SON)
$ETAB
DEF070: $NOISE(DEF080,<mode>)
DEF080: $KEY(DEF100,DEF090,<$DEFAULT(<TERMINATION>)>)
DEF090: $STAB
ORNKEY(EMULATION,EMU)
ORNKEY(TERMINATION,TRM)
$ETAB
DEF100: $NOISE(DEF110,<port>)
DEF110: $NUMBER(DEF120,^D8,<port number for DN60>)
DEF120: $NOISE(DEF130,<line>)
DEF130: $NUMBER(CONFRM,^D8,<line number for DN60>)
DEF140: $KEYDSP(DEF142,<$DEFAULT(<GATEWAY>)>)
DEF142: $STAB
ORNDSP(DEF180,<ACCESS-NAME>,ACC)
ORNDSP(DEF150,<GATEWAY>,GWY)
$ETAB
DEF150: $NODNM(DEF160,<node name for SNA Gateway>,<$FLAGS(CM%PO!CM%NSF)>)
DEF160: $KEY(DEF170,DEF162,<$DEFAULT(<ACCESS-NAME>)>)
DEF162: $STAB
ORNKEY(<ACCESS-NAME>,ACC)
$ETAB
DEF170: $FIELD(CONFRM,<access name>)
DEF180: $FIELD(DEF190,<access name>)
DEF190: $KEY(DEF200,DEF192,<$DEFAULT(<GATEWAY>)>)
DEF192: $STAB
ORNKEY(<GATEWAY>,GWY)
$ETAB
DEF200: $NODNM(CONFRM,<node name for SNA Gateway>,<$FLAGS(CM%PO!CM%NSF)>)
>;END FTDN60
SUBTTL CANCEL command tables
CANFDB: $KEYDSP(CAN010)
CAN010: $STAB
ORNDSP (CAN020,<BATCH-REQUEST>,BAT)
ORNDSP (CAN020,<CARD-PUNCH-REQUEST>,CDP)
IFN FTFTS,<
ORNDSP (CAN020,<FTS-REQUEST>,FTS)
> ;End FTFTS conditional
ORNDSP (CAN040,<MOUNT-REQUEST>,MNT)
ORNDSP (CAN020,<PAPER-TAPE-PUNCH-REQUEST>,PTP)
ORNDSP (CAN020,<PLOTTER-REQUEST>,PLT)
ORNDSP (CAN020,<PRINTER-REQUEST>,LPT)
$ETAB
CAN020: $NUMBER(CONFRM,^D10,<request number to cancel in queue or if active>,<$ACTION(CHKPOS),$ALTERNATE(CAN030)>)
TOPS20 <
CAN030: $USER(CONFRM,<$HELP(<user name whose jobs will be canceled>),$ALTERNATE(HLD040)>)
>;END TOPS20
TOPS10 <
CAN030: $USER(CONFRM,<$HELP(<[project,programmer] whose jobs will be canceled>),$ALTERNATE(HLD040)>)
>;END TOPS10
CAN040: $DEV(CAN060,<$HELP(<structure name to cancel all mount requests for>),$FLAGS(CM%PO),$ALTERNATE(CAN050)>)
TOPS10<
CAN050: $NUMBER(CAN060,^D10,<mount request number to cancel>,<$ACTION(CHKPOS),$ALTERNATE(CAN055)>)
CAN055: $TOKEN(CAN060,<*>,<$HELP(<* to specify all pending requests>)>)
>
TOPS20<
CAN050: $NUMBER(CAN060,^D10,<mount request number to cancel>,<$ACTION(CHKPOS)>)
>
CAN060: $EXPL(CONFRM,<$ALTERNATE(CONFRM)>)
SUBTTL MODIFY command tables
MODFDB:
$KEYDSP (MOD010)
MOD010: $STAB
TOPS10< ORNDSP (MOD300,<ACTIVE-SWAPPING-LIST>,ASL) >
ORNDSP (MOD020,<BATCH-REQUEST>,BAT)
ORNDSP (MOD020,<CARD-PUNCH-REQUEST>,CDP)
TOPS10< ORNDSP (MOD200,<CRASH-DUMP-LIST>,CDL) >
IFN FTFTS,<
ORNDSP (MOD020,<FTS-REQUEST>,FTS)
> ;End FTFTS conditional
ORNDSP (MOD020,<PAPER-TAPE-PUNCH-REQUEST>,PTP)
ORNDSP (MOD020,<PLOTTER-REQUEST>,PLT)
ORNDSP (MOD020,<PRINTER-REQUEST>,LPT)
TOPS10< ORNDSP (MOD200,<SYSTEM-SEARCH-LIST>,SSL) >
$ETAB
MOD020: $NUMBER(MOD030,^D10,<request number to modify in queue>,<$ACTION(CHKPOS),$ALTERNATE(MOD070)>)
MOD030: $KEYDSP(MOD040)
MOD040: $STAB
ORNDSP(MOD050,<PRIORITY>,PRI)
$ETAB
MOD050: $NOISE(MOD060,<to be>)
MOD060: $NUMBER(CONFRM,^D10,<priority for request in range 1 to 63>,<$ACTION(CHKPRI)>)
MOD070: $USER(MOD030,<$ALTERNATE(MOD080)>)
MOD080: $TOKEN(MOD090,<*>,<$HELP(<* to specify all requests>)>)
MOD090: $NODE(MOD030)
TOPS10<
;More of the MODIFY command tables
;Here if MODIFYing lists pertaining to file structures
MOD200: $NOISE (MOD210,<to>)
MOD210: $KEY (MOD230,MOD220)
MOD220: $STAB
ORNKEY (EXCLUDE,EXC)
ORNKEY (INCLUDE,INC)
$ETAB
MOD230: $DEV (CONFRM,$HELP(<file structure name>))
;Here if MODIFYing lists pertaining to disk drives (units)
MOD300: $NOISE (MOD310,<to>)
MOD310: $KEY (MOD320,MOD220)
MOD320: $DEV (CONFRM,<$HELP(<disk unit name>),$FLAGS(CM%PO)>)
>;END TOPS10
SUBTTL SHOW command tables
SHWFDB: $KEYDSP(SHW010)
SHW010: $STAB
TOPS10< ORNDSP(ALC000,ALLOCATION,ALC) >
ORNDSP(SHW500,CONFIGURATION,CFG)
ORNDSP(SHW110,<CONTROL-FILE>,CTL)
ORNDSP(SHW020,MESSAGES,MSG)
ORNDSP(SHW030,OPERATORS,OPR)
ORNDSP(SHW210,PARAMETERS,PRM)
ORNDSP(SHW400,QUEUES,QUE)
ORNDSP(CONFRM,<ROUTE-TABLE>,RTE)
TOPS20< ORNDSP(CONFRM,SCHEDULER,SCH)>
ORNDSP(STS000,STATUS,STS)
TOPS10< ORNDSP(SYS000,<SYSTEM-LISTS>,SLS) >
ORNDSP(SHW060,TIME,DAY) ;DAYTIME CHANGES TO TIME
$ETAB
SHW020: $NUMBER(CONFRM,^D10,<message number>,<$ALTER(SHW030),$ACTION(CHKVAL)>)
SHW030: $NODE(CONFRM)
SHW060: $CRLF(<$ACTION(SHWDAY##)>)
SHW110: $NOISE (SHW120,<for>)
SHW120: $KEY (SHW140,SHW130,<$DEFAULT(<BATCH-STREAM>)>)
SHW130: $STAB
ORNKEY(<BATCH-STREAM>,BAT)
$ETAB
SHW140: $NOISE (SHW145,<stream number>)
SHW145: $NUMBER (SHW150,^D10,<stream number>,$ACTION(CHKVAL))
SHW150: $SWITCHES(,SHW160,<$ALTER(CONFRM)>)
SHW160: $STAB
ORNSDP (SHW170,<LINES:>,LNS)
$ETAB
SHW170: $NUMBER (CONFRM,^D10,<number of lines>,$ACTION(CHKVAL))
SHW210: $KEYDSP(SHW220,<$ALTER(SHW320)>)
SHW220: $STAB
ORNDSP (SHW230,<BATCH-STREAM>,BAT)
ORNDSP (SHW230,<CARD-PUNCH>,CDP)
IFN FTFTS,<
ORNDSP (SHW230,<FAL-STREAM>,FAL)
ORNDSP (SHW230,<FTS-STREAM>,FTS)
> ;End FTFTS conditional
ORNDSP (SHWNOD,<NETWORK-NODE>,NOD)
ORNDSP (SHW230,<PAPER-TAPE-PUNCH>,PTP)
ORNDSP (SHW230,<PLOTTER>,PLT)
ORNDSP (SHW230,<PRINTER>,LPT)
$ETAB
SHW230: $SWITCH(SHW260,SHW250,<$ALTERNATE(SHW270)>)
SHW250: $STAB
ORNSWI(<NODE:>,NOD)
$ETAB
SHW260: $NODNM(CONFRM,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
SHW270: $RANGE(SHW280,<number or range (n:m)(/NODE:)>,<$ALTERNATE(CONFRM)>)
SHW280: $NODE(CONFRM)
SHW320: $SWITCH(SHW340,SHW330,<$ALTERNATE(CONFRM)>)
SHW330: $STAB
ORNSWI(<NODE:>,NOD)
$ETAB
SHW340: $NODNM(CONFRM,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
; Continued on next page
;Continued from previous page
; SHOW CONFIGURATION command
SHW500: $NOISE(SHW510,<of>)
SHW510: $KEYDSP(SHW520)
SHW520: $STAB
ORNDSP(SHW530,<DISK-DRIVE>,DSK)
$ETAB
SHW530: $SWITCH(CONFRM,SHW540,<$ALTERNATE(CONFRM)>)
SHW540: $STAB
ORNSWI(ALL,ALL)
ORNSWI(FREE,AVA)
ORNSWI(MOUNTED,MNT)
$ETAB
; Continued on next page
;Continued from previous page
; SHOW QUEUE command
SHW400: $KEYDSP(SHW420,<$DEFAULT(ALL),$ALTER(SHW430)>);NODE OR CONFIRM
SHW420: $STAB
ORNDSP (SHW430,<ALL-JOBS>,ALL)
ORNDSP (SHW430,<BATCH-JOBS>,BAT)
ORNDSP (SHW430,<CARD-PUNCH-JOBS>,CDP)
IFN FTFTS,<
ORNDSP (SHW430,<FTS-REQUEST>,FTS)
> ;End FTFTS conditional
ORNDSP (SHW470,<MOUNT-REQUESTS>,MNT)
ORNDSP (SHW430,<PAPER-TAPE-PUNCH-JOBS>,PTP)
ORNDSP (SHW430,<PLOTTER-JOBS>,PLT)
ORNDSP (SHW430,<PRINTER-JOBS>,LPT)
TOPS20< ORNDSP (SHW470,<RETRIEVAL-REQUESTS>,RET)>
$ETAB
SHW430: $SWITCH (,SHW440,<$ALTER(CONFRM),$ACTION(SHRSWT)>) ;Switch or confirm
SHW440: $STAB
ORNSDP (NEXT,<ALL>,ALL)
ORNSDP (SHW450,<NODE:>,NOD)
ORNSDP (NEXT,<SHORT>,SHT)
ORNSDP (SHW460,<USER:>,USR)
$ETAB
SHW450: $NODNM (NEXT,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
SHW460: $USER (NEXT)
SHW470: $SWITCH (,SHW480,<$ALTER(CONFRM),$ACTION(SHRSWT)>) ;Switch or confirm
SHW480: $STAB ; But no node allowed!
ORNSDP (NEXT,<ALL>,ALL)
ORNSDP (NEXT,<SHORT>,SHT)
ORNSDP (SHW490,<USER:>,USR)
$ETAB
SHW490: $USER (NEXT)
SUBTTL SHOW STATUS command tables
STS000: $KEYDSP(STS010,<$ALTER(STS100)>)
STS010: $STAB
ORNDSP (STS020,<BATCH-STREAM>,BAT)
ORNDSP (STS020,<CARD-PUNCH>,CDP)
ORNDSP (STS190,<DISK-DRIVE>,DSK)
IFN FTFTS,<
ORNDSP (STS020,<FAL-STEAM>,FAL)
ORNDSP (STS020,<FTS-STREAM>,FTS)
> ;End FTFTS conditional
ORNDSP (SHWNOD,<NETWORK-NODE>,NOD)
ORNDSP (STS020,<PAPER-TAPE-PUNCH>,PTP)
ORNDSP (STS020,<PLOTTER>,PLT)
ORNDSP (STS020,<PRINTER>,LPT)
ORNDSP (STS020,<READER>,RDR)
ORNDSP (STS250,<STRUCTURE>,STR)
ORNDSP (STS160,<TAPE-DRIVE>,TAP)
$ETAB
STS020: $SWITCH(STS040,STS030,<$ALTERNATE(STS050)>)
STS030: $STAB
ORNSWI(<NODE:>,NOD)
$ETAB
STS040: $NODNM(STS130,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
STS050: $RANGE(STS060,<number or range (n:m)(/NODE:)>,<$ALTERNATE(STS130)>)
STS060: $NODE(STS130)
STS100: $SWITCH(STS120,STS110,<$ALTERNATE(STS130)>)
STS110: $STAB
ORNSWI(<NODE:>,NOD)
$ETAB
STS120: $NODNM(STS130,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
STS130: $SWITCH(CONFRM,STS140,<$ALTERNATE(CONFRM)>)
STS140: $STAB
ORNSWI(SHORT,SHT)
$ETAB
STS150: $DEV(STS170,<$HELP(<tape drive name>),$ALTERNATE(STS170)>)
STS160: $CRLF(<$ALTERNATE(STS150)>)
STS170: $SWITCH(CONFRM,STS180,<$ALTERNATE(CONFRM)>)
STS180: $STAB
ORNSWI(ALL,ALL)
TOPS20< ORNSWI(CHARACTERISTICS,CHR) > ;TOPS20 ONLY
ORNSWI(FREE,FRE)
$ETAB
STS190: $SWITCH(CONFRM,STS200,<$ALTERNATE(CONFRM)>)
STS200: $STAB
ORNSWI(ALL,ALL)
ORNSWI(FREE,AVA)
ORNSWI(MOUNTED,MNT)
$ETAB
TOPS10<
STS250: $DEV(STS260,<$HELP(<structure name>),$ALTERNATE(STS260),$FLAGS(CM%PO)>)
>;END TOPS10
STS250: $SWITCH(CONFRM,STS270,<$ALTERNATE(STS280)>)
STS270: $STAB
ORNSWI(ALL,ALL)
ORNSWI(MOUNTED,MNT)
ORNSWI(UNMOUNTED,AVA)
$ETAB
STS280: $DEV(CONFRM,<$HELP(<structure name>),$ALTERNATE(CONFRM),$FLAGS(CM%PO)>)
SUBTTL SHOW SYSTEM-LIST command tables
TOPS10<
SYS000=CONFRM ;TO DELETE THE 'UNNECCESSARY CODE'
REPEAT 0,<
SYS000: $CRLF ($ALTERNATE(SYS010))
SYS010: $KEY (CONFRM,SYS020)
SYS020: $STAB
ORNKEY (<ACTIVE-SWAPPING-LIST>,ASL)
ORNKEY (<CRASH-DUMP-LIST>,CDL)
ORNKEY (<SYSTEM-SEARCH-LIST>,SSL)
$ETAB
>;END REPEAT 0
>;END TOPS10
SUBTTL LOCK/UNLOCK command tables
TOPS10 <
;LOCK COMMAND
LOCFDB: $NOISE(LOC010,<structure>)
LOC010: $DEV(LOC015,<$FLAGS(CM%PO),$HELP(<structure name>)>)
LOC015: $NOISE(LOC020,<at>)
LOC020: $FTAD(LOC030,<$ALTERNATE(LOC030)>)
LOC030: $SWITCH (CONFRM,LOC040,<$ALTERNATE(CONFRM)>)
LOC040: $STAB
ORNSWI(NOUNLOAD,NUL)
$ETAB
;UNLOCK COMMAND
ULCFDB: $NOISE(ULC010,<structure>)
ULC010: $DEV(ULC015,<$FLAGS(CM%PO),$HELP(<structure name>)>)
ULC015: $NOISE(ULC020,<at>)
ULC020: $FTAD(CONFRM,<$ALTERNATE(CONFRM)>)
>;END TOPS10
SUBTTL SHWNOD SHOW STATUS/PARAMETERS FOR NODE
SHWNOD: $CRLF (<$ALTERNATE(SHWN01)>)
SHWN01: $NODNM(CONFRM,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
SUBTTL RESPOND command tables
RSPFDB: $NOISE (RSP001,<to message number>)
RSP001: $NUMBER (RSP005,^D10,<message number>,$ACTION(CHKVAL))
RSP005: $CRLF (<$ALTER(RSP010),$ACTION(TXTLIN##),$HELP(<confirm for multiple line response>)>)
RSP010: $CTEXT (CONFRM,<single line response>)
SUBTTL REQUEUE command tables
REQFDB: $NOISE (REQ010,<current job on>)
REQ010: $KEYDSP (REQ020)
REQ020: $STAB
ORNDSP (REQ030,<BATCH-STREAM>,BAT)
ORNDSP (REQ040,<CARD-PUNCH>,CDP)
IFN FTFTS,<
ORNDSP (REQ030,<FTS-STREAM>,FTS)
> ;End FTFTS conditional
ORNDSP (REQ040,<PAPER-TAPE-PUNCH>,PTP)
ORNDSP (REQ040,<PLOTTER>,PLT)
ORNDSP (REQ040,<PRINTER>,LPT)
$ETAB
; Batch tables
;
REQ030: $STREAM (REQ100)
; Output device tables
;
REQ040: $UNIT (REQ050)
REQ050: $KEYDSP (REQ060,<$DEFAULT(CURRENT-POSITION),$ALTER(REQ100)>)
REQ060: $STAB
ORNDSP (REQ070,<BEGINNING-OF>,BEG)
ORNDSP (REQ100,<CURRENT-POSITION>,CUR)
$ETAB
REQ070: $KEY (REQ100,REQ080)
REQ080: $STAB
ORNKEY (<COPY>,CPY)
ORNKEY (<FILE>,FIL)
ORNKEY (<JOB>,JOB)
$ETAB
REQ100: $EXPL (CONFRM,<$ALTER(CONFRM)>)
SUBTTL BACKSPACE command tables
SUBTTL FORWARDSPACE command tables
BKSFDB: $KEY (BKS002,BKS001,<$DEFAULT(<PRINTER>)>)
BKS001: $STAB
ORNKEY (<PRINTER>,LPT)
$ETAB
BKS002: $UNIT(BKS003)
BKS003: $SWITCH(,BKS004)
BKS004: $STAB
ORNSDP(BKS005,<COPIES:>,CPY)
ORNSDP(CONFRM,<FILE>,FIL)
ORNSDP(BKS007,<PAGES:>,PAG)
$ETAB
BKS005: $NUMBER (CONFRM,^D10,<number of copies>,$ACTION(CHKVAL))
REPEAT 0,<
BKS006: $NUMBER (CONFRM,^D10,<number of files>,<$ACTION(CHKFIL),$DEFAULT(<1>)>)
>
BKS007: $NUMBER (CONFRM,^D10,<number of pages>,$ACTION(CHKVAL))
REPEAT 0,<
CHKFIL: SKIPG T1,CR.RES(S2) ;CHECK THAT NUMBER
JRST CHKF.1 ;GENERTE AN ERROR
CAIN T1,1 ;WAS IT A 1
$RETT ;O.K..RETURN
CHKF.1: PUSHJ P,FIXIT
MOVEI S2,[ASCIZ/only one file allowed/]
$RETF
>
SUBTTL ALIGN command table
ALIFDB: $NOISE (ALI001,<forms on>)
ALI001: $KEY (ALI003,ALI002,<$DEFAULT(<PRINTER>)>)
ALI002: $STAB
ORNKEY (<PRINTER>,LPT)
$ETAB
ALI003: $UNIT(ALI010)
ALI004: $IFILE (ALI005,<alignment file>,<$ALTER(ALI005)>)
ALI005: $SWITCH(,ALI006,<$ALTER(CONFRM),$ACTION(SHRSWT)>)
ALI006: $STAB
ORNSDP(ALI007,<PAUSE:>,PAU)
ORNSDP(ALI008,<REPEAT-COUNT:>,RPT)
$ETAB
ALI007: $NUMBER (NEXT,^D10,<seconds to pause>,$ACTION(CHKVAL))
ALI008: $NUMBER (NEXT,^D10,<times to print>,$ACTION(CHKVAL))
ALI009: $STAB
ORNSWI(STOP,STP)
$ETAB
ALI010: $SWITCH(CONFRM,ALI009,<$ALTER(ALI004)>)
SUBTTL SUPPRESS command tables
SUPFDB: $NOISE (SUP001,<carriage control on>)
SUP001: $KEY (SUP010,SUP005,<$DEFAULT(<PRINTER>)>)
SUP005: $STAB
ORNKEY (<PRINTER>,LPT)
$ETAB
SUP010: $UNIT(SUP015)
SUP015: $SWITCH(CONFRM,SUP020,<$DEFAULT(</JOB>),$ALTER(CONFRM)>)
SUP020: $STAB
ORNSWI(FILE,FIL)
ORNSWI(JOB,JOB)
ORNSWI(STOP,STP)
$ETAB
SUBTTL ROUTE command tables
RTEFDB: $NOISE (RTEF05,device)
RTEF05: $KEYDSP(RTEF10)
RTEF10: $STAB
ORNDSP(RTEF50,<ALL-DEVICES>,ALL)
ORNDSP(RTEF15,<CARD-PUNCH>,CDP)
ORNDSP(RTEF15,<PAPER-TAPE-PUNCH>,PTP)
ORNDSP(RTEF15,<PLOTTER>,PLT)
ORNDSP(RTEF15,<PRINTER>,LPT)
$ETAB
RTEF15: $NOISE (RTEF20,<unit number>)
RTEF20: $NUMBER (RTEF35,^D10,<source device unit number>,$ALTERN(RTEF25))
RTEF25: $KEYDSP (RTEF30)
RTEF30: $STAB
ORNDSP (RTEF35,<ALL-UNITS>,ALL)
$ETAB
;To explain the following magical line...
;The default '(' is to allow an ESC to go to the next field and display noise.
;The ERRPDB is used to only get to the next field on switch error or ESC.
;The alternate is to permit entering the destination or crlf
RTEF35: $SWITCH (RTEF39,RTEF36,<$DEFAULT(<(>),$ERRPDB(RTEF40),$ALTER(RTEF45)>)
RTEF36: $STAB
ORNSWI(NODE:,NOD)
$ETAB
RTEF39: $NODNM (RTEF40,<node name>,<$FLAGS(CM%PO)>)
RTEF40: $NOISE (RTEF45,<to unit number>)
RTEF45: $NUMBER (RTEF48,^D10,<destination unit number>,<$ALTERNATE(RTEF46)>)
RTEF46: $KEYDSP (RTEF47,<$ALTERNATE(RTEF80)>)
RTEF47: $STAB
ORNDSP (RTEF48,<ALL-UNITS>,ALL)
$ETAB
RTEF48: $NODE (CONFRM)
;For parsing all devices
RTEF50: $NOISE (RTEF55,<on node>)
RTEF55: $KEYDSP (RTEF60,<$HELP(<ALL-NODES>),$ALTERNATE(RTEF65)>)
RTEF60: $STAB
ORNDSP (RTEF70,<ALL-NODES>,ALL)
$ETAB
RTEF65: $NODNM (RTEF70,<source node name>,<$FLAGS(CM%PO!CM%NSF)>)
RTEF70: $NOISE (RTEF75,<to node>)
RTEF75: $NODNM (CONFRM,,<$ALTERNATE(RTEF80),$FLAGS(CM%PO!CM%NSF)>)
RTEF80: $CRLF ($HELP(<confirm to delete routing>))
SUBTTL SEND command tables
SNDFDB: $NOISE (SND001,<to>)
SND001: $KEYDSP (SND005)
SND005: $STAB
ORNDSP(SND040,<ALL>,ALL)
ORNDSP(SND015,<BATCH-STREAM>,BAT)
ORNDSP(SND010,<JOB>,JOB)
ORNDSP(SND025,<OPERATOR>,OPR)
ORNDSP(SND020,<TERMINAL>,TRM)
$ETAB
SND010: $NUMBER(SND030,^D10,<job number>,$ACTION(CHKVAL))
SND015: $STNUM(SND025)
SND020: $NUMBER(SND030,^D8,<terminal number>,$ACTION(CHKVAL))
SND025: $NODE(SND030)
SND030: $CRLF (<$ALTER(SND035),$ACTION(TXTLIN##),$HELP(<confirm for multiple line response>)>)
SND035: $CTEXT (CONFRM,<single line response>)
SND040: $NODE(SND035)
SUBTTL SET command tables
SETFDB: $KEYDSP(SET010)
SET010: $STAB
ORNDSP(SET170,BATCH-STREAM,BAT)
ORNDSP(SET490,<CARD-PUNCH>,CDP)
TOPS20< ORNDSP(SET700,<DISK-DRIVE>,DSK)>
ORNDSP(SET070,JOB,JOB)
IFN FTDN60,<
ORNDSP(SETNOD,<NODE>,NOD)
>;END FTDN60
TOPS20< ORNDSP(SET800,<ONLINE>,ONL)>
ORNDSP(SET430,<PAPER-TAPE-PUNCH>,PTP)
ORNDSP(SET370,PLOTTER,PLT)
ORNDSP(SETP00,PORT,POR)
ORNDSP(SET200,PRINTER,LPT)
TOPS20< ORNDSP(SETSCH,<SCHEDULER>,SCH)>
TOPS20< ORNDSP(SET600,<STRUCTURE>,STR)>
ORNDSP(SET630,<TAPE-DRIVE>,TAP)
ORNDSP(SET020,TERMINAL,TRM,CM%INV)
TOPS10< ORNDSP(SET900,USAGE,USG)>
$ETAB
SET020: $KEYDSP(SET030,<$ACTION(SETRTN##)>)
SET030: $STAB
TOPS10< ORNDSP(SET350,KEYPAD,KPD)
ORNDSP(SET350,NOKEYPAD,NKP)>
ORNDSP(SET040,<TYPE>,TYP)
$ETAB
SET040: $NOISE (SET050,<to be>)
SET050: $KEY(SET350,SET060,<$ACTION(SETRTN##)>)
SET060: $STAB
DEFINE X(PARNAM,SIXNAM,SUF,EOLSEQ),<
KEYTAB(.TT'SUF,<PARNAM>)
>;END DEFINE X
TRMTYP ;Generate the options
$ETAB
SET070: $NOISE(SET080,<job number>)
SET080: $NUMBER(SET090,^D10,<job number>,$ACTION(CHKVAL))
SET090: $KEYDSP(SET100)
SET100: $STAB
ORNDSP(CONFRM,<NOOPR-INTERVENTION>,NOI)
ORNDSP(CONFRM,<OPR-INTERVENTION>,OIA)
TOPS20< ORNDSP(SET110,SCHEDULER-CLASS,CLS)>
$ETAB
TOPS20 <
SET110: $NOISE(SET120,<to be>)
SET120: $NUMBER(CONFRM,^D10,<scheduler class to put the job in>)
>;END TOPS20
SET170: $SRANGE(SET180)
SET180: $KEYDSP(SET250)
SET200: $URANGE(SET210)
SET210: $KEYDSP(SET300)
SET250: $STAB
ORNDSP(SET295,ATTRIBUTE,ATR)
TOPS10< ORNDSP(SET290,<MEMORY-LIMITS>,MEM)>
ORNDSP(CONFRM,NOOPR-INTERVENTION,NOI)
ORNDSP(CONFRM,OPR-INTERVENTION,OIA)
ORNDSP(SET260,PRIORITY-LIMITS,PRL)
ORNDSP(SET270,TIME-LIMITS,TIM)
$ETAB
SET260: $RANGE(CONFRM,<maximum priority limit or a range (1-63)>)
SET270: $RANGE(CONFRM,<maximum time limits in minutes or a range>)
SET280: $NUMBER(CONFRM,^D10,<line number>,$ACTION(CHKVAL))
;GET MEMORY LIMITS
TOPS10 <
SET290: $RANGE(CONFRM,<maximum number of pages or a range>)
> ;End TOPS10
SET295: $KEYDSP(SET297)
SET297: $STAB
ORNDSP(CONFRM,BATCON,BAT)
ORNDSP(CONFRM,SITGO,SIT)
$ETAB
SET300: $STAB
ORNDSP(SET790,DESTINATION,DST)
ORNDSP(SET330,FORMS-TYPE,FOT)
ORNDSP(SET340,LIMIT-EXCEEDED-ACTION,LEA)
ORNDSP(SET310,PAGE-LIMITS,PGL)
ORNDSP(SET260,PRIORITY-LIMITS,PRL)
$ETAB
SET310: $RANGE(CONFRM,<maximum number of pages or a range>)
SET320: $STAB
ORNKEY(ABORT,CNC)
ORNKEY(ASK,ASK)
ORNKEY(PROCEED,IGN)
$ETAB
SET330: $FIELD(CONFRM,<forms name>)
SET340: $KEY(CONFRM,SET320)
SET350: $CRLF(<$ACTION(SETTRM##)>)
SET370: $URANGE (SET380)
SET380: $KEYDSP (SET390)
SET390: $STAB
ORNDSP (SET330,<FORMS-TYPE>,FOT)
ORNDSP (SET340,LIMIT-EXCEEDED-ACTION,LEA)
ORNDSP (SET480,<OUTPUT-LIMIT>,OPL)
ORNDSP (SET260,PRIORITY-LIMITS,PRL)
$ETAB
SET430: $URANGE (SET440)
SET440: $KEYDSP (SET450)
SET450: $STAB
ORNDSP (SET330,<FORMS-TYPE>,FOT)
ORNDSP (SET340,LIMIT-EXCEEDED-ACTION,LEA)
ORNDSP (SET470,<OUTPUT-LIMIT>,OPL)
ORNDSP (SET260,PRIORITY-LIMITS,PRL)
$ETAB
SET470: $RANGE(CONFRM,<maximum limit in feet or a range>)
SET480: $RANGE(CONFRM,<maximum limit in minutes or a range>)
SET490: $URANGE(SET500)
SET500: $KEYDSP (SET510)
SET510: $STAB
ORNDSP (SET790,<DESTINATION>,DST)
ORNDSP (SET330,<FORMS-TYPE>,FOT)
ORNDSP (SET340,LIMIT-EXCEEDED-ACTION,LEA)
ORNDSP (SET530,<OUTPUT-LIMIT>,OPL)
ORNDSP (SET260,PRIORITY-LIMITS,PRL)
$ETAB
SET530: $RANGE(CONFRM,<maximum limit in cards or a range>)
SUBTTL SET STRUCTURE command tables
TOPS20 <
SET600: $DEV (SET610,<$HELP(<structure name>),$FLAGS(CM%PO)>)
SET610: $KEYDSP(SET620)
SET620: $STAB
ORNDSP(SET622,<ACKNOWLEDGED>,ACK)
ORNDSP(SET624,<AVAILABLE>,AVA)
ORNDSP(CONFRM,<DOMESTIC>,DOM)
ORNDSP(CONFRM,<EXCLUSIVE>,EXL)
ORNDSP(CONFRM,<FOREIGN>,FOR)
ORNDSP(SET622,<IGNORED>,IGN)
ORNDSP(CONFRM,<REGULATED>,REG)
ORNDSP(CONFRM,<SHARED>,SHR)
ORNDSP(SET624,<UNAVAILABLE>,UAV)
ORNDSP(CONFRM,<UNREGULATED>,URG)
$ETAB
SET622: $NOISE(CONFRM,<as a new mountable structure>)
SET624: $NOISE(CONFRM,<to new users>)
>;END TOPS20
SUBTTL SET TAPE command tables
SET630: $DEV(SET640,<$HELP(<tape drive name>)>)
SET640: $KEYDSP(SET650,<$ACTION(SET655)>)
SET650: $STAB
ORNDSP(SET660,<AVAILABLE>,AVA)
ORNDSP(SETINI,<INITIALIZE>,INI)
ORNDSP(SET670,<UNAVAILABLE>,UAV)
$ETAB
$DATA VOLIDF,1 ;Volume id flag (used for INITIALIZE)
;if 0 then switch not used
;if -1 then switch used
;if 1 then switch needed (ANSI labels)
SET655: SETZM VOLIDF ;Initialize volid flag
$RETT
SET660: $NOISE(CONFRM,<for use by system>)
SET670: $CRLF (<$ALTER(SET680),$ACTION(TXTLIN##),$HELP(<confirm for multiple line explanation for drive unavailable>)>)
SET680: $CTEXT (CONFRM,<single line response>)
SUBTTL SET DISK command tables
TOPS20 <
SET700: $NOISE(SET705,<on>)
SET705: $KEY(SET720,SET710,<$DEFAULT(<CHANNEL>)>)
SET710: $STAB
ORNKEY(<CHANNEL>,CHN)
$ETAB
SET720: $NUMBER(SET722,^D10,<channel number>,<$ACTION(CHKCHN)>)
SET722: $KEYDSP(SET724,<$DEFAULT(<DRIVE>)>)
SET724: $STAB
ORNDSP(SET726,<CONTROLLER>,CON)
ORNDSP(SET750,<DRIVE>,DRV)
$ETAB
SET726: $NUMBER(SET730,^D10,<controller number or -1 if none>)
SET730: $KEY(SET750,SET740,<$DEFAULT(<DRIVE>)>)
SET740: $STAB
ORNKEY(<DRIVE>,DRV)
$ETAB
SET750:$NUMBER(SET760,^D10,<drive number>,<$ACTION(CHKVAL)>)
SET760: $KEYDSP(SET770)
SET770: $STAB
ORNDSP(SET660,<AVAILABLE>,AVA)
ORNDSP(SET670,<UNAVAILABLE>,UAV)
$ETAB
SET790: $NOISE(SET792,<to be>)
SET792: SNADST (CONFRM)
>;END TOPS20
SUBTTL SET ONLINE command tables
TOPS20 <
SET800: $NOISE(SET810,<device address>)
SET810: $NUMBER(SET820,<^D8>,<channel number>,<$ACTION(CHKCHN)>)
SET820: $COMMA(SET830)
SET830: $NUMBER(SET840,<^D8>,<device unit number>,<$ACTION(CHKVAL)>)
SET840: $COMMA(SET850,<$ALTERNATE(<CONFRM>)>)
SET850: $NUMBER(SET860,<^D8>,<controller number or -1 if no controller number>,<$DEFAULT(<-1>)>)
SET860: $NOISE(SET865,<alternate address>)
SET865: $NUMBER(SET870,<^D8>,<alternate channel>,<$ACTION(CHKCHN),$ALTERNATE(CONFRM)>)
SET870: $COMMA(SET875)
SET875: $NUMBER(SET880,<^D8>,<alternate device unit number>,<$ACTION(CHKVAL)>)
SET880: $COMMA(SET885,<$ALTERNATE(<CONFRM>)>)
SET885: $NUMBER(CONFRM,<^D8>,<alternate controller number or -1>,<$DEFAULT(<-1>)>)
CHKCHN: SKIPL S1,CR.RES(S2) ;CHECK THAT NUMBER
CAILE S1,7 ;IN BOUNDS
SKIPA ;BAD NUMBER
$RETT ;IT'S GOOD
PUSHJ P,FIXIT
MOVEI S2,[ASCIZ/channel number not in range 0:7/]
$RETF
>;END TOPS20
SUBTTL SET USAGE command tables
TOPS10<
SET900: $KEYDSP(SET901)
SET901: $STAB
ORNDSP(SET910,BILLING-CLOSURE,UBC)
ORNDSP(SET920,FILE-CLOSURE,UFC)
$ETAB
SET910: $TIME(CONFRM)
SET920: $KEYDSP(SET925,<$ALTER(SET950)>)
SET925: $STAB
ORNDSP(SET930,DAILY,DLY)
ORNDSP(SET940,EVERY,WKY)
ORNDSP(SET960,NOW,NOW)
$ETAB
SET930: $NOISE(SET932,<at>)
SET932: $TIME(SET960)
SET940: $KEY(SET945,SET942)
SET942: $STAB
KEYTAB(2,FRIDAY)
KEYTAB(5,MONDAY)
KEYTAB(3,SATURDAY)
KEYTAB(4,SUNDAY)
KEYTAB(1,THURSDAY)
KEYTAB(6,TUESDAY)
KEYTAB(0,WEDNESDAY)
$ETAB
SET945: $NOISE(SET946,<at>)
SET946: $TIME(SET960)
SET950: $TAD(SET960)
SET960: $SWITCH(CONFRM,SET965,<$ALTERNATE(CONFRM)>)
SET965: $STAB
ORNSWI(<NO-SESSION-ENTRIES>,NOS)
$ETAB
> ;End TOPS10 conditional
SUBTTL SET TAPE INITIALIZE command tables
SETINI: $SWITCH(,INI010,<$ACTION(SHRSWT),$ALTERNATE(INI250)>)
INI010: $STAB
TOPS10< ORNDSP(INI300,<ABORT>,CNC) >
ORNSDP(INI140,<COUNT:>,CNT)
ORNSDP(INI020,<DENSITY:>,DEN)
ORNSDP(INI240,<INCREMENT:>,INC)
ORNSDP(INI040,<LABEL-TYPE:>,LBT)
ORNSDP(INI060,<OVERRIDE-EXPIRATION:>,OVR)
ORNSDP(INI080,<OWNER:>,OWN)
ORNSDP(INI100,<PROTECTION:>,PRO)
ORNSDP(INI120,<TAPE-DISPOSITION:>,TDP)
ORNSDP(INI170,<VOLUME-ID:>,VID)
$ETAB
INI020: $KEY(NEXT(SETINI),INI030,<$DEFAULT(<1600>)>)
INI030: $STAB
ORNKEY(1600,160)
ORNKEY(200,200)
ORNKEY(556,556)
ORNKEY(6250,625)
ORNKEY(800,800)
$ETAB
INI040: $KEY(NEXT(SETINI),INI050,<$ACTION(INI057),$DEFAULT(<ANSI>)>)
INI050: $STAB
ORNKEY(ANSI,ANS)
ORNKEY(EBCDIC,EBC)
TOPS20< ORNKEY(TOPS-20,T20)>
INI055: ORNKEY(UNLABELED,UNL)
$ETAB
INI057: MOVE S1,CR.RES(S2) ;Get the result from the key table
CAIE S1,INI055 ;Was the label type unlabeled?
SKIPE VOLIDF ;No - skip if still need volume id
$RETT ;No further action needed
MOVEI S1,1
MOVEM S1,VOLIDF ;Set that we need volid to be specified
$RETT
INI060: $KEY(NEXT(SETINI),INI070,<$DEFAULT(<NO>)>)
INI070: $STAB
ORNKEY(NO,NO)
ORNKEY(YES,YES)
$ETAB
TOPS20 <
INI080: $USER(NEXT(SETINI),<$HELP(<user who owns the tape>)>)
>;END -20
TOPS10 <
INI080: $USER(NEXT(SETINI),<$HELP(<user PPN who owns the tape>)>)
>;END -10
INI100: $NUMBER(NEXT(SETINI),^D8,<protection for the tape as an octal number>)
INI120: $KEY(NEXT(SETINI),INI130,<$DEFAULT(<UNLOAD>)>)
INI130: $STAB
ORNKEY(HOLD,HLD)
ORNKEY(UNLOAD,UNL)
$ETAB
INI140: $NUMBER(NEXT(SETINI),^D10,<number of volumes to be initialized>,<$ACTION(CHKPOS),$DEFAULT(<10>)>)
INI170: $FIELD(NEXT(SETINI),<volume-id without quotes>,<$PREFILL(INI175)>)
INI175: SETOM VOLIDF ;Say we saw volume id
$RETT
INI240: $NUMBER(NEXT(INI200),^D10,<increment value for assigning next volume-id>,<$ACTION(CHKPOS),$DEFAULT(<1>)>)
INI250: $CRLF ($ACTION(INI260))
INI260: SKIPG VOLIDF ;Is it not needed or not used?
$RETT ;Yes
MOVEI S2,[ASCIZ/Volid must be specified/]
$RETF
INI300: $CRLF (<$HELP(<confirm to abort tape initialization>)>)
SUBTTL SET NODE command tables
IFN FTDN60,<
SETNOD: $NODNM(SETN10,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
SETN10: $KEYDSP(SETN12,<$ALTERNATE(SETN20)>)
SETN12: $STAB
ORNDSP(SETN95,<BYTES-PER-MESSAGE>,BPM)
ORNDSP(SETN40,<CLEAR-SEND-DELAY>,CSD)
ORNDSP(SETN60,<RECORDS-PER-MESSAGE>,RPM)
ORNDSP(SETN80,<TIMEOUT-CATEGORY>,TOU)
ORNDSP(SETN90,<TRANSPARENCY>,TRA)
$ETAB
SETN20: $KEYDSP(SETN22)
SETN22: $STAB
ORNDSP(SETN31,<APPLICATION>,PLU)
ORNDSP(SETN35,<CHARACTER-SET>,CHS)
ORNDSP(SETN32,<CIRCUIT>,CIR)
ORNDSP(SETN33,<DATA>,DAT)
ORNDSP(SETN34,<LOGON-MODE>,LOM)
$ETAB
SETN31: $CTEXT(CONFRM,<IBM application>)
SETN32: $CTEXT(CONFRM,<circuit-ID>)
SETN33: $CTEXT(CONFRM,<IBM logon data>)
SETN34: $CTEXT(CONFRM,<IBM logon mode>)
SETN35:$IFILE(CONFRM,<Translation table file>)
SETN40: $NUMBER(CONFRM,^D10,<time in jiffies>,<$ACTION(CHKVAL)>)
SETN50: $KEY(CONFRM,SETN55,<$DEFAULT(<ON>)>)
SETN55: $STAB
ORNKEY(<OFF>,OFF)
ORNKEY(<ON>,ON)
$ETAB
SETN60: $NUMBER(CONFRM,^D10,<records per message for 2780>,<$ACTION(CHKVAL)>)
SETN80: $KEY(CONFRM,SETN85)
SETN85: $STAB
ORNKEY(<PRIMARY>,PRI)
ORNKEY(<SECONDARY>,SEC)
$ETAB
SETN90: $KEY(CONFRM,SETN55)
SETN95: $NUMBER(CONFRM,^D10,<bytes per message size for the front end>)
>;END FTDN60
SUBTTL SET SCHEDULER command tables (TOPS20)
TOPS20 <
SETSCH: $KEYDSP(SETS10,<$DEFAULT(<BIAS-CONTROL>)>)
SETS10: $STAB
ORNDSP(SETS50,<BATCH-CLASS>,BAT)
ORNDSP(SETS20,<BIAS-CONTROL>,BIA)
ORNDSP(SETS40,<CLASS>,CLS)
$ETAB
SETS20: $NOISE(SETS30,<to>)
SETS30: $NUMBER(CONFRM,^D10,<<decimal number, a small number to favor interactive processes, larger number for compute-bound>>,<$ACTION(CHKVAL)>)
SETS40: $NOISE(SETS42,<number>)
SETS42: $NUMBER(SETS44,^D10,<scheduler class number>,<$ACTION(CHKVAL)>)
SETS44: $NOISE(SETS46,<to percent>)
SETS46: $NUMBER(CONFRM,^D10,<percent for this scheduler class (0-99)>,<$ACTION(CHKPER)>)
SETS50: $KEY(CONFRM,SETS52,<$ALTERNATE(SETS54)>)
SETS52: $STAB
ORNKEY(<BACKGROUND>,BCK)
ORNKEY(<NONE>,NON)
$ETAB
SETS54: $NUMBER(CONFRM,^D10,<scheduler class for batch>,<$ACTION(CHKVAL)>)
CHKPER: SKIPL T1,CR.RES(S2) ;CHECK THAT NUMBER
CAILE T1,^D100 ;TOO LARGE
SKIPA
$RETT ;RETURN
PUSHJ P,FIXIT
MOVEI S2,[ASCIZ/scheduler percent out of range/]
$RETF
>;END TOPS20
SUBTTL SET PORT command tables
SETP00: $KEY(SETP20,SETP10,<$DEFAULT(<CI>)>)
SETP10: $STAB
ORNKEY(<CI>,CI)
ORNKEY(<NI>,NI)
$ETAB
SETP20: $KEY(CONFRM,SETP30)
SETP30: $STAB
ORNKEY(<AVAILABLE>,AVA)
ORNKEY(<UNAVAILABLE>,UAV)
$ETAB
SUBTTL ENABLE/DISABLE command tables
ENAFDB: $KEYDSP (ENA001,<$DEFAULT(OUTPUT-DISPLAY)>)
ENA001: $STAB
TOPS20< ORNDSP(ENA050,<AUTOMATIC-VOLUME-RECOGNITION>,AVR)>
TOPS20< ORNDSP(ENACLS,<CLASS-SCHEDULER>,CLS)>
TOPS20< ORNDSP(CONFRM,<FILE-RETRIEVAL-WAITS>,RET)>
ORNDSP(CONFRM,<LOGGING>,LGG)
ORNDSP(ENA100,<OUTPUT-DISPLAY>,OPD)
ORNDSP(CONFRM,<QUEUE-REQUESTS>,QUE)
TOPS10< ORNDSP(CONFRM,<STRUCTURE-RECOGNITION>,ASR)>
TOPS10< ORNDSP(ENA050,<VOLUME-RECOGNITION>,AVR)>
$ETAB
ENA050: $NOISE(ENA065,<for>)
ENA065: $KEY(CONFRM,ENA070,<$ALTERNATE(ENA075)>)
ENA070: $STAB
TOPS10< ORNKEY(<DISK-DRIVES>,DSK)>
ORNKEY(<TAPE-DRIVES>,TAP)
$ETAB
TOPS20<
ENA075: $DEV(CONFRM,$HELP(tape drive name))
>;END TOPS20
TOPS10<
ENA075: $DEV(CONFRM,<$HELP(<tape or disk drive name>)>)
>;END TOPS10
;continued on next page
;continued from previous page
; Here on ENABLE/DISABLE OUTPUT-DISPLAY
ENA100: $NOISE (ENA105,<of>)
IFG NUMAPL,<
ENA105: $KEYDSP(ENA110,<$ALTERNATE(ENA140)>)
>;END NUMAPL
IFLE NUMAPL,<
ENA105: $KEY(ENA110)
>;END
ENA110: $STAB
ORNDSP(ENA160,<ALL-MESSAGES>,ALM)
ORNDSP(ENA160,<BATCH-MESSAGES>,BAT)
ORNDSP(CONFRM,<BUGCHK-MESSAGES>,CHK)
ORNDSP(CONFRM,<BUGINF-MESSAGES>,INF)
ORNDSP(ENA160,<CARD-PUNCH-MESSAGES>,CDP)
ORNDSP(ENA160,<CARD-READER-INTERPRETER-MESSAGES>,BIN)
ORNDSP(CONFRM,<DECNET-EVENT-MESSAGES>,EVT)
ORNDSP(CONFRM,<DECNET-LINK-MESSAGES>,DLK)
IFN FTFTS,<
ORNDSP(ENA160,<FAL-MESSAGES>,FAL)
> ; End of FTFTS conditional
ORNDSP(ENA160,<FILE-RETRIEVAL-MESSAGES>,RET)
IFN FTFTS,<
ORNDSP(ENA160,<FTS-MESSAGES>,FTS)
> ; End of FTFTS conditional
ORNDSP(ENA160,<MOUNT-MESSAGES>,MNT)
ORNDSP(ENA160,<PAPER-TAPE-PUNCH-MESSAGES>,PTP)
ORNDSP(ENA160,<PLOTTER-MESSAGES>,PLT)
ORNDSP(ENA160,<PRINTER-MESSAGES>,LPT)
ORNDSP(ENA160,<READER-MESSAGES>,RDR)
ORNDSP(CONFRM,<SYSTEM-MESSAGES>,SYM)
ORNDSP(ENA160,<USER-MESSAGES>,USR)
$ETAB
IFG NUMAPL,<
ENA140: $KEY(CONFRM,ENA150)
DEFINE X(A,B,C,D),<ORNKEY(<A'-MESSAGES>,<B>)>
ENA150: $STAB
TABAPL
$ETAB
>;END NUMAPL
ENA160: $SWITCH(NEXT(ENA160),ENA170,<$ACTION(SHRSWT),$ALTERNATE(CONFRM)>)
ENA170: $STAB
ORNSWI(<INFORMATION-MESSAGES>,OTH)
ORNSWI(<JOB-MESSAGES>,JOB)
ORNSWI(<OPR-ACTION-MESSAGES>,OAM)
$ETAB
SUBTTL ENACLS ENABLE CLASS SCHEDULER command tables
TOPS20 <
ENACLS: $SWITCH(,ENAC10,<$ALTERNATE(CONFRM),$ACTION(SHRSWT),$PREFILL(ENAACT)>)
ENAC10: $STAB
ORNSDP(ENAC30,<CLASS-ASSIGNMENTS:>,CAS)
ORNSDP(ENAC20,<WINDFALL:>,WFL)
$ETAB
ENAC20: $KEY(NEXT(ENAC10),ENAC25,<$DEFAULT(<ALLOCATED>)>)
ENAC25: $STAB
ORNKEY(<ALLOCATED>,ALO)
ORNKEY(<WITHHELD>,WHD)
$ETAB
ENAC30: $KEY(NEXT(ENAC10),ENAC35,<$DEFAULT(<ACCOUNT>)>)
ENAC35: $STAB
ORNKEY(ACCOUNT,ACT)
ORNKEY(<POLICY-PROGRAM>,PPR)
$ETAB
ENAACT: MOVE S1,CMDCOD ;GET THE COMMAND CODE
CAIE S1,.KYDIS ;WAS IT DISABLE?
$RETT ;NO..RETURN O.K.
MOVEI S1,CONFRM ;GET CONFRM ADDRESS
AOS S1 ;BUMP TO NEXT PDB
STORE S1,CR.PDB(S2),RHMASK ;RESET NEXT PDB
$RETT ;RETURN
>;END TOPS20
SUBTTL CLOSE command tables
SUBTTL DEFINE command tables
CLOFDB: $KEYDSP (CLO001,<$DEFAULT(<LOG>)>)
CLO001: $STAB
ORNDSP (CONFRM,LOG,LOG)
$ETAB
SUBTTL REPORT command tables
RPTFDB: $NOISE (RPT005,<by>)
RPT005: $FIELD (RPT015,<user name>)
RPT015: $DEV (RPT020,<$HELP(<device being reported>),$FLAGS(CM%PO)>)
RPT020: $CRLF (<$ALTER(RPT025),$ACTION(TXTLIN##),$HELP(<confirm for multiple line response>)>)
RPT025: $CTEXT (CONFRM,<single line response>)
SUBTTL MOUNT command tables
TOPS10<
MTNFDB: $KEY (MTN020,MTN010,<$DEFAULT(<STRUCTURE>)>)
MTN010: $STAB
ORNKEY (<STRUCTURE>,STR)
$ETAB
MTN020: $DEV (MTN030,<$HELP(<structure name>),$FLAGS(CM%PO)>)
MTN030: $NOISE (MTN040,<as>)
MTN040: $DEV (MTN050,<$HELP(<alias name>),$ALTERNATE(MTN050),$FLAGS(CM%PO)>)
MTN050: $SWITCH (CONFRM,MTN060,<$ALTERNATE(<CONFRM>)>)
MTN060: $STAB
ORNSWI (<WRITE-LOCKED>,WLK)
$ETAB
>;END TOPS10
MTNFDB: $KEY (MTN020,MTN010,<$DEFAULT(<STRUCTURE>)>)
MTN010: $STAB
ORNKEY (<STRUCTURE>,STR)
$ETAB
MTN020: $DEV (MTN030,<$HELP(<alias name>),$FLAGS(CM%PO)>)
MTN030: $SWITCH (MTN050,MTN040,<$ALTERNATE(<CONFRM>)>)
MTN040: $STAB
ORNSWI(<STRUCTURE-ID:>,SID)
$ETAB
MTN050: $DEV (CONFRM,<$HELP(<structure name>),$FLAGS(CM%PO)>)
SUBTTL NEXT - NEXT COMMAND
NXTFDB: $NOISE (NXT010,<job on>) ;[NXT]
NXT010: $KEYDSP(NXT020) ;[NXT]
NXT020: $STAB ;[NXT]
ORNDSP(NXT040,BATCH-STREAM,BAT) ;[NXT]
ORNDSP(NXT030,CARD-PUNCH,CDP) ;[NXT]
ORNDSP(NXT030,PAPER-TAPE-PUNCH,PTP) ;[NXT]
ORNDSP(NXT030,PLOTTER,PLT) ;[NXT]
ORNDSP(NXT030,PRINTER,LPT) ;[NXT]
$ETAB ;[NXT]
NXT030: $NOISE (NXT050,<unit number>) ;[NXT]
NXT040: $NOISE (NXT050,<stream number>) ;[NXT]
NXT050: $NUMBER (NXT080,^D10,<number (/NODE:)>,<$ACTION(STOBTH),>) ;[NXT]
NXT080: $SWITCH (NXT090,NXT085,<$DEFAULT(<REQUEST-ID>),$ALTER(NXT100)>) ;[NXT]
NXT085: $STAB ;[NXT]
ORNSWI(NODE:,NOD) ;[NXT]
$ETAB ;[NXT]
NXT090: $NODNM (NXT100,<node name>,<$FLAGS(CM%PO!CM%NSF)>) ;[NXT]
NXT100: $KEYDSP (NXT110,<$DEFAULT(<REQUEST-ID>)>) ;[NXT]
NXT110: $STAB ;[NXT]
ORNDSP(NXT120,<REQUEST-ID>,RQN) ;[NXT]
$ETAB ;[NXT]
NXT120: $NUMBER(CONFRM,^D10,<request number of the next job to schedule>,<$ACTION(CHKPOS)>) ;[NXT]
SUBTTL IDENTIFY command tables
TOPS20 <
IDNFDB: $NOISE(IDN010,<tape on drive>)>
TOPS10 <
IDNFDB: $NOISE(IDN010,<device>)>
TOPS20 <
IDN010: $DEV(IDN020,<$HELP(<tape drive name>)>)>
TOPS10 <
IDN010: $DEV(IDN020,<$HELP(<device name>)>)>
IDN020: $NOISE(IDN030,<with>)
IDN030: $KEYDSP(IDN040,<$DEFAULT(<REQUEST-ID>)>)
IDN040: $STAB
ORNDSP(IDN050,<REQUEST-ID>,RQN)
TOPS20< ORNDSP(CONFRM,<SCRATCH>,SCR) > ;ONLY VALID ON TOPS20
ORNDSP(IDN060,<VOLUME-ID>,VID)
$ETAB
IDN050: $NUMBER(CONFRM,^D10,<request number of the mount request>,<$ACTION(CHKPOS)>)
IDN060: $QUOTE(CONFRM,<volume-id in quotes if has non-alphanumeric characters>,<$ALTERNATE(IDN070)>)
IDN070: $FIELD(CONFRM,<volume-id without quotes>)
SUBTTL SWITCH command tables (TOPS20)
TOPS20 <
SWIFDB: $NOISE(SWI010,<request number>)
SWI010: $NUMBER(SWI020,^D10,<request number of the mount request to switch>)
SWI020: $NOISE(SWI030,<to new volume>)
SWI030: $QUOTE(SWI050,<volume-id in quotes if has non-alphanumeric characters>,<$ALTERNATE(SWI040)>)
SWI040: $FIELD(SWI050,<volume-id without quotes>)
SWI050: $NOISE(SWI060,<on drive>)
SWI060: $DEV(CONFRM,<$HELP(<tape drive to switch request to>),$ALTERNATE(CONFRM)>)
>;END TOPS20
SUBTTL DISMOUNT command tables
DSMFDB:$KEYDSP(DSM010)
DSM010: $STAB
ORNDSP(DSM020,<STRUCTURE>,STR)
ORNDSP(DSM030,<TAPE-DRIVE>,TAP)
$ETAB
TOPS20 <
DSM020: $DEV (DSM060,<$HELP(<structure name to dismount>)>)
DSM060: $NOISE (DSM070,<with>,<$ALTERNATE(CONFRM)>)
DSM070: $KEY (CONFRM,DSM080,<$ALTERNATE(CONFRM)>)
DSM080: $STAB
ORNKEY (<NO-REMOVAL>,NRM)
ORNKEY (<REMOVAL>,REM)
$ETAB
> ;End TOPS20
DSM030: $DEV (CONFRM,<$HELP(<tape drive from which to dismount tape>)>)
TOPS10 <
DSM020: $DEV (DSM040,<$HELP(<structure name to dismount>),$FLAGS(CM%PO)>)
DSM040: $SWITCH(,DSM050,<$ACTION(SHRSWT),$ALTERNATE(CONFRM)>)
DSM050: $STAB
ORNSDP(NEXT(DSM040),<NOCHECK>,NCK)
ORNSDP(NEXT(DSM040),<REMOVE>,REM)
$ETAB
> ;End TOPS10
comment \
;removed on July 11,1979
SUBTTL UNLOAD command tables (removed)
UNLFDB: $NOISE(UNL010,<tape drive>)
UNL010: $DEV (CONFRM,<$HELP(<tape drive to unload>)>)
; UNDEFINED FOR NOW
\;end of comment
SUBTTL RECOGNIZE command tables
TOPS10 <
RECFDB: $NOISE(REC010,<labels on>)
REC010: $DEV (CONFRM,<$HELP(<tape or disk drive to recognize>),$FLAGS(CM%PO)>)
>;END TOPS10
SUBTTL PUSH command tables
TOPS20 <
PUSFDB:: $NOISE(PUS100,<to EXEC level>)
PUS100: $CRLF(<$ACTION(PUSHRT##)>)
>;END TOPS20
SUBTTL HELP command tables
ND CR.ADR,4 ;Address of current argument
HLPFDB:: $NOISE (HLPFD1,<with>)
HLPFD1: $CTEXT(,<command>,<$ACTION(HLPACT),$DEFAULT(HELP)>)
HLPACT: MOVE T1,CR.ADR(S2) ;Get the data
HRROI T1,ARG.DA(T1) ;Point to the string
$CALL SETOUT## ;Setup proper $TEXT defaults
MOVEI S1,HEPFD ;Point to help file
MOVE S2,T1 ;Point to string
$CALL P$HELP##
$CALL SNDOUT## ;Send the output
$CALL P$NPRO## ;Mark no processing
$RETT ;Return
;File descriptor for help file for OPR
TOPS20 <
HEPFD: XWD HSIZ,0
ASCIZ /HLP:OPR.HLP/
HSIZ==.-HEPFD
>
TOPS10 <
HLPFD: $BUILD FDMSIZ
$SET(.FDLEN,FD.LEN,FDMSIZ)
$SET(.FDSTR,,<SIXBIT/HLP/>)
$SET(.FDNAM,,<SIXBIT/OPR/>)
$SET(.FDEXT,,<SIXBIT/HLP/>)
$EOB
>
SUBTTL SHOW ALLOCATION command tables
TOPS10<
ALC000: $KEYDSP (ALC010)
ALC010: $STAB
ORNDSP (CONFRM,<ALL-REQUESTS>,ALL)
ORNDSP (ALC020,<BATCH-REQUEST>,BRQ)
ORNDSP (ALC030,JOB,JOB)
$ETAB
ALC020: $NUMBER (CONFRM,^D10,<request-id for batch job>,<$ALTERNATE(ALC040)>)
ALC030: $NUMBER (CONFRM,^D10,<job number>)
ALC040: $CRLF ($HELP(<confirm for all batch requests>))
>;END TOPS10
SUBTTL UNDEFINE command tables
UNDFDB: $KEY (UND020,UND010,<$DEFAULT(<STRUCTURE>)>)
UND010: $STAB
ORNKEY (STRUCTURE,STR)
$ETAB
UND020: $DEV (CONFRM,<$HELP(<structure name>),$FLAGS(CM%PO)>)
END