Trailing-Edge
-
PDP-10 Archives
-
BB-H138E-BM
-
galaxy-sources/please.mac
There are 31 other files named please.mac in the archive. Click here to see a list.
TITLE PLEASE - Galaxy CUSP for Operator/User Commumications
SUBTTL Preliminaries
ASCIZ /
COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION
1979,1980,1981,1982,1983,1984,1985
/
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED
; AND COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE
; AND WITH THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS
; SOFTWARE OR ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR
; OTHERWISE MADE AVAILABLE TO ANY OTHER PERSON. NO TITLE TO
; AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE
; WITHOUT NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT
; BY DIGITAL EQUIPMENT CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY
; OF ITS SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY
; DIGITAL.
SEARCH GLXMAC ;Galaxy symbols
SEARCH ORNMAC ;ORION symbols
PROLOG (PLEASE) ;Set up
TOPS10 <IF2,<PRINTX [Assembling Galaxy-10 PLEASE]>>
TOPS20 <IF2,<PRINTX [Assembling Galaxy-20 PLEASE]>>
SUBTTL Edit vector and Version numbers
PLSVEC: BLDVEC (GLXMAC,GMC,L)
BLDVEC (ORNMAC,OMC,L)
BLDVEC (PLEASE,PLS,L)
PLSMAN==:112 ;Maintenance edit number
PLSDEV==:123 ;Development edit number
VERSIN (PLS) ;Generate edit number
PLSWHO==0
PLSVER==5
PLSMIN==0
PLSVRS==<VRSN.(PLS)>+GMCEDT+OMCEDT
LOC 137
EXP PLSVRS
RELOC
SUBTTL Table of Contents
; Table of Contents for PLEASE
;
;
; Section Page
; 1. Preliminaries. . . . . . . . . . . . . . . . . . . . . 1
; 2. Edit vector and Version numbers. . . . . . . . . . . . 2
; 3. Table of contents. . . . . . . . . . . . . . . . . . . 3
; 4. Revision history . . . . . . . . . . . . . . . . . . . 4
; 5. Assembly parameters and local storage. . . . . . . . . 5
; 6. Galaxy interface . . . . . . . . . . . . . . . . . . . 6
; 7. Macros . . . . . . . . . . . . . . . . . . . . . . . . 7
; 8. PLEASE command parse tables. . . . . . . . . . . . . . 8
; 9. Dialogue mode parse tables . . . . . . . . . . . . . . 9
; 10. Program intialization and command parsing. . . . . . . 10
; 11. Command mode processor . . . . . . . . . . . . . . . . 11
; 12. Dialogue loop. . . . . . . . . . . . . . . . . . . . . 12
; 13. Switch processors. . . . . . . . . . . . . . . . . . . 13
; 14. Command line RESCANing . . . . . . . . . . . . . . . . 14
; 15. Command parsing. . . . . . . . . . . . . . . . . . . . 15
; 16. IPCF message processing. . . . . . . . . . . . . . . . 16
; 17. Check for operator on duty . . . . . . . . . . . . . . 17
; 18. Exit routines. . . . . . . . . . . . . . . . . . . . . 18
; 19. Message handler. . . . . . . . . . . . . . . . . . . . 19
; 20. Messages . . . . . . . . . . . . . . . . . . . . . . . 20
; 21. The end. . . . . . . . . . . . . . . . . . . . . . . . 21
SUBTTL Revision history
COMMENT \
112 4.2.1528 9-Nov-82
Fix copyright.
***** Release 4.2 -- begin maintenance edits *****
***** Release 5.0 -- begin development edits *****
120 5.1003 30-Dec-82
Move to new development area. Add version vector. Clean up
edit organization. Update TOC.
121 5.1043 11-Oct-83
Due to an overlay in PLEASE and GLXLIB at location 400000, make
PLEASE into a single segmented program by removing the TWOSEG
statement and four RELOC statements.
122 5.1046 21-Oct-83
Change version number from 104 to 5.
123 5.1191
Increase the message size from 400. to 2000.
\ ;End of Revision History
SUBTTL Assembly parameters and local storage
; Assembly parameters
;
ND PDLSIZ,150 ;Stack size
ND BUFSIZ,<^D2000/5>+1 ;S%CMND buffer size in characters
ND ATMSZ,<^D2000/5>+1 ;ATOM buffer size in characters
SYSPRM MC.CON,JW.WCN,<1B9> ;/MESSAGE:CONTINUATION
SYSPRM MC.FIR,JW.WFL,<1B10> ;/MESSAGE:FIRST
SYSPRM MC.PFX,JW.WPR,<1B11> ;/MESSAGE:PREFIX
; Local storage
;
ZBEG:! ;Start of block to clear on start up
PDL: BLOCK PDLSIZ ;Stack
PIBBLK: BLOCK PB.MNS ;PIB
MSGBLK: BLOCK 5 ;Message block
USRJOB: BLOCK 1 ;User job number
OPRNOD: BLOCK 1 ;Operator node number/name
BUFFER: BLOCK BUFSIZ ;S%CMND buffer
ATMBUF: BLOCK ATMSZ ;ATOM buffer
CMDMOD: BLOCK 1 ;Command mode flag
PARBLK: BLOCK PAR.SZ ;Parser block
PARFLG: BLOCK 1 ;Parse flags
CMDBLK: BLOCK PAGSIZ ;Command block
CSB: BLOCK 1 ;Command state block address (S%CMND)
TCSB: BLOCK 1 ;Command state block address (K%TXTI)
GTJBLK: BLOCK 16 ;GTJFN block for S%CMND
SWTWRD: BLOCK 1 ;Set if switches have been specified
SCNFLG: BLOCK 1 ;Light on a RESCAN
ZEND:! ;End of block to clear on start up
SUBTTL Galaxy interface
; GLXLIB initialization block
;
IB: $BUILD (IB.SZ) ;Size of block
$SET (IB.PRG,,%%.MOD) ;Program name
$SET (IB.OUT,,T%TTY) ;TTY output
$SET (IB.FLG,IT.OCT,1) ;Require command terminal
$SET (IB.FLG,IB.DPM,1) ;Use job number for a PID
$SET (IB.PIB,,PIBBLK) ;PID block pointer
$EOB ;End of block
; Template for Command State Block for S%CMND
;
CSBTMP: $BUILD .CMGJB+1
$SET .CMIOJ,LHMASK,.PRIIN ;Primary input
$SET .CMIOJ,RHMASK,.PRIOU ;Primary output
$SET .CMBFP,,<POINT 7,BUFFER> ;Pointer to input buffer
$SET .CMPTR,,<POINT 7,BUFFER> ;Start the parse at the beginning
$SET .CMCNT,,BUFSIZ*5-1 ;Size of buffer
$SET .CMABP,,<POINT 7,ATMBUF> ;Pointer to start of atom buffer
$SET .CMABC,,ATMSZ*5-1 ;Size of atom buffer
$SET .CMGJB,,GTJBLK ;GTJFN block
$EOB
; Template for Command State Block for S%TXTI
;
TXTTMP: $BUILD .RDBKL+1
$SET .RDCWB,,.RDBKL ;Primary input
$SET .RDFLG,,<RD%BRK!RD%JFN> ;Primary output
$SET .RDIOJ,LHMASK,.PRIIN ;Input device is TTY
$SET .RDIOJ,RHMASK,.PRIOU ;Output device is TTY
$SET .RDDBP,,<POINT 7,ATMBUF> ;Pointer to input buffer
$SET .RDDBC,,ATMSZ*5-1 ;Size of buffer
$SET .RDBFP,,<POINT 7,ATMBUF> ;Pointer to start of atom buffer
$SET .RDRTY,,0 ; Place to store our prompts
$SET .RDBRK,,0 ; No break set
$SET .RDBKL,,<POINT 7,ATMBUF> ; Backup limit
$EOB
; File open block (FOB) for help file
;
HLPFOB: EXP HELPFD ;File Descriptor
EXP 7 ;Bytesize
; File descriptor (FD) for help file
;
TOPS10 < ;TOPS-10 spec
HELPFD: $BUILD (FDMSIZ) ;Size of block
$SET (.FDLEN,FD.LEN,FDMSIZ) ;Length of FD
$SET (.FDLEN,FD.TYP,.FDNAT) ;File spec type (native)
$SET (.FDSTR,,<'HLP '>) ;Ersatz device HLP:
$SET (.FDNAM,,<'PLEASE'>) ;File name
$SET (.FDEXT,,<'HLP '>) ;Extension
$EOB ;End of block
> ;End of TOPS-10 conditional
TOPS20 < ;TOPS-20 spec
HELPFD: XWD FDSIZ,.FDNAT ;Native FD with size FDSIZ
ASCIZ |HLP:PLEASE.HLP| ;Write the file name
FDSIZ==.-HELPFD ;Define the size
> ;End of TOPS-20 conditional
SUBTTL Macros
;; Macros for building FDB's
; Macro to generate function data block -- caller supplies help text
DEFINE FLDDB. (TYP,FLGS,DATA,HLPM,DEFM,LST) <
XLIST
..XX==<FLD(TYP,CM%FNC)>+FLGS+<Z LST>
IFNB <HLPM>,<..XX==CM%HPP!..XX>
IFNB <DEFM>,<..XX==CM%DPP!..XX>
..XX
IFNB <DATA>,<DATA>
IFB <DATA>,<0>
IFNB <HLPM>,<POINT 7,[ASCIZ \HLPM\]>
IFB <HLPM>,<IFNB <DEFM>,<0>>
IFNB <DEFM>,<POINT 7,[ASCIZ \DEFM\]>
LIST
>
;Macro to generate function descriptor block with break mask supplied
DEFINE FLDBK. (TYP,FLGS,DATA,HLPM,DEFM,BRKADR,LST)<
..XX==<FLD(TYP,CM%FNC)>+FLGS+<Z LST>
IFNB <HLPM>,<..XX=CM%HPP!..XX>
IFNB <DEFM>,<..XX=CM%DPP!..XX>
IFNB <BRKADR>,<..XX=CM%BRK!..XX>
..XX
IFNB <DATA>,<DATA>
IFB <DATA>,<0>
IFNB <HLPM>,<POINT 7,[ASCIZ HLPM]>
IFB <HLPM>,<IFNB <DEFM'BRKADR>,<0>>
IFB <DEFM>,<IFNB <BRKADR>,<0>>
IFNB <DEFM>,<POINT 7,[ASCIZ \DEFM\]>
IFNB <BRKADR>,<BRKADR>
>
; Macro to generate a message
;
DEFINE $MSG (PFX,ADDR),<
PUSHJ P,MSG ;;Call the message processor
CAI [EXP M..'PFX ;;Text block address
EXP ADDR] ;;Return address
> ;;End of $MSG macro
; Macro to generate the message text
;
DEFINE $MSGT (CHR,PFX,FIRST,CONT),<
M..'PFX:EXP "CHR" ;;Character
SIXBIT |PLS'PFX| ;;Prefix
[ITEXT (< 'FIRST>)] ;;First line
[ITEXT (<CONT>)] ;;Continuation line
> ;;End of $MSGT macro
SUBTTL PLEASE command parse tables
PLS010: FLDDB.(.CMINI) ;INIT FDB
PLS020: FLDDB.(.CMKEY,,PLS030) ;KEYWORD FDB
PLS030: $STAB ;Keyword table for PLS020
KEYTAB (DIALOG,<Continue>,CM%INV)
KEYTAB (PLSCMD,<Please>)
KEYTAB (DIALOG,<Run>,CM%INV)
KEYTAB (DIALOG,<Start>,CM%INV)
$ETAB
PLS040: FLDDB. (.CMSWI,,PLS050,Single line message
or Confirm for Multiple-line message
or) ;SWITCH FDB
PLS050: $STAB ;Switch table for PLS040
KEYTAB (.SWHLP,<Help>)
KEYTAB (.SWNNM,<Node:>)
$ETAB
PLS060: FLDDB. (.CMNOD,CM%SDH,,Operator node to send to)
PLS080: FLDDB. (.CMCFM,CM%SDH,,Confirm for multi-line message,,PLS090)
PLS090: FLDBK. (.CMFLD,CM%SDH,,Single line message,,CMDBRK)
PLS100: FLDDB. (.CMCFM)
; Break character mask for command mode input
;
TOPS10<
CMDBRK: 000340,,001400 ;Break on <LF><VT><FF><CTRLZ><ESCAPE>
000000,,000000 ;Allow
000000,,000000 ; all other
000000,,000000 ; characters
> ;End TOPS-10 Conditional
TOPS20<
CMDBRK: 000240,,000000 ;Break on <LF><FF>
000000,,000000 ;Allow
000000,,000000 ; all other
000000,,000000 ; characters
> ;End TOPS-20 Conditional
; Please command mode prompt
;
PLSPMT: ASCIZ |PLEASE>|
SUBTTL Dialogue mode parse tables
DIA020: FLDDB. (.CMKEY,,DIA030,,,DIA040)
DIA030: $STAB
KEYTAB (,\"32)
$ETAB
DIA040: FLDBK. (.CMFLD,,,,,DIABRK)
; Break character mask for dialogue mode input
;
DIABRK: 000000,,001400 ;Break on <CTRLZ> or <ESCAPE>
000000,,000000 ;Allow
000000,,000000 ; all other
000000,,000000 ; characters
; Dialog mode prompt
;
BDIAPT: ASCIZ |Enter text, terminate with CTRL/Z to wait for response,
or ESCape to send message and exit
|
DIAPMT: ASCIZ |Enter new text (Same terminators)
|
SUBTTL Program intialization and command parsing
PLEASE: JFCL ;No CCL
RESET ;Stop I/O
MOVE P,[IOWD PDLSIZ,PDL] ;Set up stack
MOVE S1,[ZBEG,,ZBEG+1] ;Set up BLT
SETZM ZBEG ;Clear the first word
BLT S1,ZEND-1 ;Clear low segment
MOVX S1,PB.MNS ;Minimum size block
STORE S1,PIBBLK+PB.HDR,PB.LEN ;Store it
MOVX S1,IB.SZ ;Size of block
MOVEI S2,IB ;Address of block
PUSHJ P,I%INIT## ;Initialize GLXLIB
SETO S1, ;-1 means us
MOVX S2,JI.JNO ;Function code
$CALL I%JINF ;Get our job number
MOVEM S2,USRJOB ;Store it
SETO S1, ;-1 our job
MOVX S2,JI.LOC ;Function code
$CALL I%JINF ;Get our node number
MOVEM S2,OPRNOD ;Incase /NODE omitted
PUSHJ P,SCAN ;Rescan the command line
;Fall into command mode processor
SUBTTL Command mode processor
COMMAND:MOVE P,[IOWD PDLSIZ,PDL] ;Reset the PDL
SETOM CMDMOD ;Indicate in command mode
SKIPN S1,CSB ;Get address of CSB
PUSHJ P,GETCSB ;Get storage for CSB
HRLI S1,CSBTMP ;Make a BLT pointer
MOVEI S2,(S1) ;Get dest address in S2
BLT S1,.CMGJB(S2) ;Fill in the block
COMM.1: MOVE S1,CSB ;Get address of CSB
MOVE S2,[POINT 7,PLSPMT] ;Get the PLEASE> prompt
MOVEM S2,.CMRTY(S1) ;Put in CSB
TOPS10<
MOVE S2,[XWD .PRIIN,.PRIOU] ;Get the JFN's incase we had a RESCAN
MOVEM S2,.CMIOJ(S1) ;And stick them in the CSB
> ;End TOPS-10 Conditional
MOVEI S2,REPARS ;Get reparse address
HRRM S2,.CMFLG(S1) ;Put in CSB
SKIPN SCNFLG ;Have we found anything when scanning
JRST COMM.3 ;No, go on
SETZM SCNFLG ;Yes, turn off the flag
MOVE S2,[POINT 7,[0]] ;Yes, get a dummy prompt
MOVEM S2,.CMRTY(S1) ;And make it current
TOPS10<
MOVEI S2,.NULIO ;Get null output
STORE S2,.CMIOJ(S1),RHMASK ;We don't want to echo
> ;End TOPS-10 Conditional
COMM.3: MOVEI S2,PLS010 ;Key address of INIT FDB
PUSHJ P,S%CMND ;Init the PARSER
COMM.2: SETZM SWTWRD ;No switches used yet
MOVE S1,CSB ;Get CSB
MOVEI S2,PLS020 ;Get FDB
PUSHJ P,CMDPRS ;Parse a command
JUMPF CMDERR ;Can't, issue error
MOVE S1,CR.RES(S2) ;Get the keyword address
HRRZ S1,(S1) ;Get the code for the keyword
PJRST (S1) ;Dispatch and never return
GETCSB: MOVEI S1,.CMGJB+1 ;Get a CSB of length .CMGJB+1
$CALL M%GMEM ;Get the memory
MOVEM S2,CSB ;Store it away
MOVE S1,S2 ;Get the address in S1
POPJ P, ;And return
; Here on a PLEASE command
;
PLSCMD: PUSHJ P,CHKOPR ;Check for an operator on duty
MOVE S1,CSB ;Get CSB
MOVEI S2,PLS040 ;Get SWITCH FDB
PUSHJ P,CMDPRS ;Parse the command
JUMPF PLSC.1 ;If it wasn't a switch, go on
MOVE S1,CR.RES(S2) ;Get the keyword address
HRRZ S1,(S1) ;Get the code
JRST (S1) ;And go process the switch
PLSC.1: MOVE S1,CSB ;Get the CSB
MOVEI S2,1 ;Get a lit bit
STORE S2,.CMFLG(S1),CM%WKF ;Light the wakeup on end-of-field bit
MOVEI S2,PLS080 ;Get CONFIRM/FIELD switch
PUSHJ P,CMDPRS ;Parse it
JUMPF [$STOP(IPE,Internal parser error)]
HRRZ S1,CR.PDB(S2) ;Find out which FDB was used
CAIN S1,PLS080 ;Was it the CONFIRM
JRST DIALOG ;Yes, do dialog stuff
LDB S1,[POINT 7,ATMBUF,6] ;Look at first byte of field
CAIN S1,"/" ;Was he trying to do a switch
$MSG (SSE,CHKXIT) ;? Switch syntax error
HRRZ S1,CR.PDB(S2) ;Get address of used FDB
LOAD S1,.CMFNP(S1),CM%FNC ;Get function code
CAIN S1,.CMKEY ;Was it keyword?
JRST MONRET ;Must have a control-Z
CAIE S1,.CMFLD ;Then it better have been field
JRST [$MSG (EPM,CHKXIT)] ;? Error parsing message
JRST DIAL.1 ; Go process the message
SUBTTL Dialogue loop
DIALOG: MOVE P,[IOWD PDLSIZ,PDL] ;Reset the PDL
SETZM CMDMOD ;Indicate dialogue mode
SKIPE TCSB ;Get address of CSB
JRST D.1 ; Don't get any memory now
MOVEI S1,.RDRTY ; Get the lenght of the block
$CALL M%GMEM ; Get a chunk of memory
MOVEM S2,TCSB ; Store the address away
SKIPA T1,[POINT 7,BDIAPT] ;Get the pre-dialog prompt
D.1: MOVE T1,[POINT 7,DIAPMT] ; Get the regular dialog prompt
MOVE S2,TCSB ; Get the address of the arg block
HRLI S1,TXTTMP ;Make a BLT pointer
HRR S1,S2 ; Put destination in S1
MOVEI S2,(S1) ; S2 also
BLT S1,.RDRTY-1(S2) ;Fill in the block
MOVE S1,TCSB ;Get address of CSB
MOVEM T1,.RDRTY(S1) ; Store the prompt
$TEXT (,<^T/(T1)/^A>) ; Prompt him
$CALL K%TXTI ;Parse the command
JUMPF [$STOP (TBI,<S%TXTI block incorrect>)] ; Shouldn't happen
DIAL.1: MOVE T2,[POINT 7,ATMBUF] ; Point to the message
DIAL.2: ILDB T3,T2 ;GET A CHARACTER
JUMPE T3,DIA.4A ;DONE ?
MOVEI T1,(T3) ; Save the character
CAIE T3,.CHCNZ ; Message terminator?
CAIN T3,.CHESC ; . . .
JRST DIAL.4 ; Yes, go finish up
CAIL T3," " ;A CONTROL CHARACTER ?
JRST DIAL.2 ;NO - IGNORE IT
CAXN T3,.CHBEL ;ALLOW <BELL>
JRST DIAL.3 ;STORE IT
CAIE T3,.CHLFD ;ALLOW <LF>
CAXN T3,.CHCRT ;ALLOW <CR>
SKIPA ;DON'T CHANGE IT
MOVEI T3," " ;CONVERT TO A SPACE
DIAL.3: DPB T3,T2 ;STORE CHARACTER
JRST DIAL.2 ;LOOP BACK FOR MORE
DIAL.4: SETZ S1, ; Make a null
DPB S1,T2 ; Overwrite the terminator
DIA.4A: SKIPE CMDMOD ; Are we in dialog mode?
JRST DIAL.5 ; No, handle the command
MOVE S1,TCSB ; Get the address of arguement block
MOVE S1,.RDFLG(S1) ; Get the flags from there
TXNN S1,RD%BTM ; Did he type a break character
$MSG (MTL,.+1) ; Message too long
LDB S1,[POINT 7,ATMBUF,6] ; Get the first character
CAIN S1,.CHESC ; Is it an ESCAPE?
JRST MONRET ; Yes, just go out
CAIN S1,.CHCNZ ; Is it a ^Z
JRST D.1 ; Yes, don't send null message
SETZ S1, ; Make a null character
DPB S1,T2 ; Store it into the break character
CAIN T1,.CHCNZ ; Was the break character a ^Z?
JRST WTOR ; Yes, wait for response
JRST WTO ; No, must have been ESCape
DIAL.5: MOVE S1,CR.FLG(S2) ;Get command flags
TXNE S1,CM%ESC ;Was escape typed ?
JRST WTO ;Yes - don't wait
; Here to Write To OPR (and wait for a response)
;
WTOR: $WTOR (,<^T/ATMBUF/>,,USRJOB,<$WTNOD(OPRNOD),$WTFLG(WT.NFY)>)
$MSG (OPN,.+1) ;[Operator has been notified]
PUSHJ P,IPCSER ;Process IPCF messages
SKIPE CMDMOD ; Are we in command mode?
JRST DIALOG ; Yes, Go start up a dialog now
JRST D.1 ; Otherwise go for more dialogue
; Here to Write To OPR (don't wait for a response)
;
WTO: $WTO (,<^T/ATMBUF/>,,<$WTNOD(OPRNOD)>)
$MSG (OPN,MONRET) ;[Operator has been notified]
SUBTTL Switch processors
; /Help
;
.SWHLP: SKIPE S1,SWTWRD ;Have any switches been specified
JRST [$MSG(BHR,CHKXIT)] ;Yes, bad help request
MOVE S1,CSB ;Get CSB address
MOVEI S2,PLS100 ;Get confirm FDB
PUSHJ P,CMDPRS
JUMPF [$MSG(BHR,CHKXIT)] ;Bad help request, no confirmed
MOVEI S1,2 ;Length of help FOB
MOVEI S2,HLPFOB ;Address of help FOB
$CALL F%IOPN ;Open the file
JUMPF [$MSG(NHA,CHKXIT)] ;No help, sorry Charlie
MOVEI T1,(S1) ;Get the IFN for calls
RDHLP: MOVEI S1,(T1) ;Get the IFN for call
$CALL F%IBUF ;Get a buffer
JUMPF CLSHLP ;Assume EOF
EXCH S1,S2 ;Switch count and BP
$CALL K%BUFF ;Put it out to TTY
JRST RDHLP ;Get the next buffer
CLSHLP: $CALL K%FLSH ;If not assume EOF and flush buffer.
MOVEI S1,(T1) ;Get the IFN
$CALL F%REL ;And close the file
JRST CHKXIT ;We're done
; /Node: xxx
;
.SWNNM: SKIPE SWTWRD ;Is this the first switch
JRST [$MSG(SUT,CHKXIT)] ;No, switch used twice, no no
SETOM SWTWRD ;Say that we have a switch
MOVE S1,CSB ;Get the CSB
MOVEI S2,PLS060 ;Get the NODE FDB
PUSHJ P,CMDPRS ;Parse it
JUMPF [$MSG(NIN,CHKXIT)] ;Die on error
TOPS10<
MOVE S1,CR.RES(S2) ;Get name or number
> ;End TOPS-10 Conditional
TOPS20<
HRROI S1,ATMBUF ;Pointer to node name
$CALL S%SIXB ;Convert to sixbit
MOVE S1,S2 ;Get in S1
> ;End TOPS-20 Conditional
MOVEM S1,OPRNOD ;Store it
JRST PLSCMD ;Get rest of command
; Here on a Reparse
REPARS: MOVE P,[IOWD PDLSIZ,PDL] ;Reset the stack
JRST COMM.2 ;Go to retry the parse
REPAR1: MOVE P,[IOWD PDLSIZ,PDL] ;Reset the stack
JRST D.1 ;Go to retry the parse
SUBTTL Command line RESCANing
; Macro to build a break character mask
;
DEFINE $BRK (CHR),<
...BRK==0
IRP CHR,<...BRK==...BRK!1B35_CHR>
EXP ...BRK
PURGE ...BRK
>
SCAN:
TOPS20<
MOVEI S1,.RSINI ;Make data available
RSCAN ;Check for command
JRST GO2 ;None
JUMPE S1,GO2 ;If char count zero, no cmd
> ;End TOPS-20 Conditional
TOPS10<
RESCAN 1 ;See if anything there
SKIPA ;Could be...
JRST GO2 ;Nothing, skip all this
> ;End TOPS-10 Conditional
SETOM SCNFLG ;Light the flag
POPJ P, ;Return
GO2:
TOPS20<
HRROI S1,[0] ;Clear rescan
RSCAN
JFCL
> ;End TOPS-20 Conditional
POPJ P,
SUBTTL Command parsing
; Parse a command
; Call: S1/ Address of CSB
; S2/ Address of FDB
;
; Returns TRUE if no parsing error with CMDBLK ready to digest
; Returns FALSE parsing error
;
CMDPRS: $CALL S%CMND ; Do the Call
$RETIF ; Pass along a false return
MOVE S1,CR.FLG(S2) ; Get flag word of reply block
TXNE S1,CM%NOP ; Was no-parse set
$RETF ; Yes, return false
$RETT ; No, return true
; Here on command errors
;
CMDERR: HRROI T1,[ASCIZ |Illegal Keyword|] ;Get pointer to error text
$MSG (CME,CHKXIT) ;? Command syntax error
SUBTTL IPCF message processing
IPCSER: $CALL C%BRCV ;Wait for an IPCF message
LOAD P1,MDB.MS(S1),MD.ADR ;Get message address
MOVEI P3,.OHDRS(P1) ;Point to the blocks
LOAD S1,PFD.HD(P3),PF.TYP ;Get the type field
CAIE S1,.CMTXT ;Is it text?
JUMPF IPCERR ;It's an error, otherwise
MOVEI T1,ARG.DA(P3) ;Address of the text
LOAD S2,PFD.HD(P3),PF.LEN ;Get the length in S2
ADD P3,S2 ;Add to the current location
LOAD S2,.MSTYP(P1),MS.TYP ;Get the message type
CAXE S2,MT.TXT ;Is it a text message
JRST IPCS.1 ;No - process as a response
MOVEI P2,.OHDRS+ARG.DA(P1) ;Get the address
$MSG (EFO,.+1) ;? Error from ORION
$CALL C%REL ;Release the IPCF page
PJRST CHKXIT ;Done
; Here with a normal response from the operator
;
IPCS.1: MOVE S2,P3 ;Get the current address
LOAD S1,PFD.HD(S2),PF.TYP ;And the type field
LOAD TF,PFD.HD(S2),PF.LEN ;Get the length
ADD P3,TF ;So we can bump the pointer
CAXE S1,.ACKID ;Check for ACK ID block
JRST IPCERR ;Generate an error
MOVE T2,ARG.DA+1(S2) ;Get the value
MOVEI T3,[ITEXT(<^N/T2/>)] ;Node name
TLNN T2,770000 ;Sixbit node name ?
MOVEI T3,[ITEXT(<Terminal ^O/T2/>)] ;No - must be terminal number
$TEXT (,<
^C/[-1]/ From Operator ^I/(T3)/:
=^7/[76]/^T/(T1)/>) ;Dump the response
$CALL C%REL ;Release IPCF page
$RETT ;Return
; Here when we detect a bad message type
;
IPCERR: $MSG (UMO,.+1) ;? Unrecognized message from ORION
$CALL C%REL ;Release the IPCF page
JRST CHKXIT ;Done
SUBTTL Check for operator on duty
; Check for operator on duty
; Outputs a warning message if monitor beleives there is no
; operator in attendance
;
CHKOPR:
TOPS10 < ;TOPS-10 only
MOVX S1,%CNSTS ;Get the STATES word
GETTAB S1,
SETZ S1, ;Can't
TXNE S1,ST%NOP ;Check for no operator
> ;End of TOPS-10 conditional
TOPS20 < ;TOPS-20 only
MOVX S1,.SFOPR ;Get operator in attendance function
SETZ S2, ;Clear result
TMON ;Check
SKIPN S2 ;No operator check
> ;End of TOPS-20 conditional
$MSG (NOP,.+1) ;% No operator in attendance
$RETT ;Operator on duty
SUBTTL Exit routines
; Check if PLEASE should exit after an error
;
CHKXIT:
TOPS10<
CLRBFI ;Clear input buffer of type ahead
> ;End TOPS-10 Conditional
TOPS20<
MOVEI S1,.PRIIN
CFIBF
> ;End TOPS-20 Conditional
SKIPN CMDMOD ;Called from command mode ?
JRST DIALOG ;No - return to dialogue mode
SKIPN DEBUGW ;Are we debugging
JRST MONRET ;No - then stop the job
JRST COMM.1 ;Yes - go prompt user
; Return to the monitor
;
MONRET: $HALT ;Stop the job
JRST PLEASE ;Do it again
SUBTTL Message handler
MSG: MOVE S1,@(P) ;Get pointer to argument block
MOVE S2,1(S1) ;Get return address
HRRM S2,(P) ;Store it
MOVE S1,(S1) ;Get address of block
MOVSI S2,(S1) ;Get message block address
HRRI S2,MSGBLK ;Point to storage address
BLT S2,MSGBLK+3 ;Copy data
MOVE S1,MSGBLK+0 ;Get first character
CAIE S1,"[" ;A comment ?
TDZA S1,S1 ;No - load a <NUL>
MOVEI S1,"]" ;Yes - finish it
MOVEM S1,MSGBLK+4 ;Store it
TOPS10 < ;TOPS-10 only
HRROI S1,.GTWCH ;Get the job's watch bits
GETTAB S1, ;From the monitor
SETZ S1, ;Can't
TXNN S1,MC.PFX!MC.FIR ;Prefix or first line set ?
> ;End of TOPS-10 conditional
MOVX S1,MC.PFX!MC.FIR ;No - load defaults
MOVX S2,[ITEXT (<>)] ;Null text
TXNN S1,MC.PFX ;Wants a prefix ?
SETZM MSGBLK+1 ;No
TXNN S1,MC.FIR ;Wants a first line ?
MOVEM S2,MSGBLK+2 ;No
TXNN S1,MC.CON ;Wants a continuation message ?
MOVEM S2,MSGBLK+3 ;No
$TEXT (,<^M^J^7/MSGBLK+0/^W/MSGBLK+1/^I/@MSGBLK+2/^I/@MSGBLK+3/^7/MSGBLK+4/>)
$RET ;Return
SUBTTL Messages
$MSGT ?,CME,<Command error - ^T/(T1)/>,<
An incorrect command has been entered.>
$MSGT ?,EFO,<Error from ORION - ^T/(P2)/>,<
ORION has detected an error.>
$MSGT ?,EPM,<Error while parsing message>,<
The only legal terminators are ESCape and
carriage return.>
$MSGT %,NHA,<No help available>,<
HLP:PLEASE.HLP cannot be found.>
$MSGT %,NOP,<No operator in attendance>,<
The system is unattended. You message will be
sent however.>
$MSGT <[>,OPN,<Operator at ^N/OPRNOD/ has been notified at ^C/[-1]/>,<
Your message has been sent the the operator.>
$MSGT ?,SSE,<Switch syntax error>,<
The command contained either an illegal switch,
or a switch delimiter (a slash) with no switch
name following it.>
$MSGT ?,UMO,<Unrecognized message from ORION>,<
An unknown message type was received from
ORION instead of the expected operator
response message. There could be a version
skew between PLEASE and ORION.>
$MSGT ?,NIN,<Node ^T/ATMBUF/ is not in the network or was specified
without trailing double colon>,<The value of the /NODE: switch does
not correspond to a network node.>
$MSGT ?,SUT,<Switch used twice - ^T/ATMBUF/>,<A switch can
only be used once in a given command.>
$MSGT ?,BHR,<Bad help request, use PLEASE /HELP>,<An attempt
was made to use the /HELP switch with other text.>
$MSGT %,MTL,<Message too long - Will be truncated and sent>,<Your
message exceeded the maximum numbers of characters allowed.
It will be sent incomplete.>
SUBTTL The end
END PLEASE