Trailing-Edge
-
PDP-10 Archives
-
BB-H311C-RM
-
swskit-hacks/find.mac
There are 3 other files named find.mac in the archive. Click here to see a list.
TITLE FIND SUBSTRING SEARCH PROGRAM
SUBTTL J. G. ZIMA/JGZ AUGUST 1980
SEARCH MACSYM,MONSYM ;GET SYMBOLS
SEARCH ZSUBS ;GET SUBROUTINE PACKAGE
SALL ;NICE LOOKING MACROS
.DIRECT FLBLST ;AND NICE LISTING
;VERSION INFORMATION:
VMAJOR==2 ;MAJOR VERSION LEVEL
VMINOR==0 ;MINOR VERSION LEVEL
VEDIT==50 ;EDIT LEVEL
VWHO==0 ;WHO LAST EDITED
;FIND is a substring search program. The canonical use is to search
;all of the monitor source files for all occurrances of a given symbol.
;FIND is designed to be fast, and reasonably concise to run. It
;is not intended to ever become full of features which will detract
;from those goals.
;
;ASSEMBLY INSTRUCTIONS:
;
; @LOAD FIND.MAC
; @SAVE FIND
;
;RELATED FILES:
; FIND.MAC THIS FILE
; FIND.CTL CONTROL FILE TO BUILD FIND
; ZSUBS.UNV UNIVERSAL FOR COMND/LUUO SUBROUTINES
; ZSUBS.REL REQUIRE FILE FOR COMND/LUUO SUBROUTINES
;
SUBTTL TABLE OF CONTENTS
; TABLE OF CONTENTS PAGE
; ----------------- ----
;
; 1. J. G. ZIMA/JGZ AUGUST 1980. . . . . . . . . . . . . . . . . 1
; 2. TABLE OF CONTENTS. . . . . . . . . . . . . . . . . . . . . . 2
; 3. REVISION HISTORY . . . . . . . . . . . . . . . . . . . . . . 3
; 4. DEFINITIONS. . . . . . . . . . . . . . . . . . . . . . . . . 6
; 5. ENTRY VECTOR AND INITIALIZATION. . . . . . . . . . . . . . . 7
; 6. THE SIMPLE COMMANDS - HELP . . . . . . . . . . . . . . . . . 9
; 7. RESET COMMAND TO RESET PARAMETERS. . . . . . . . . . . . . . 10
; 8. INFORMATION COMMAND TO TELL PARAMETERS . . . . . . . . . . . 12
; 9. TYPEOUT FORMATTING SELECTION COMMANDS. . . . . . . . . . . . 14
; 10. FILES COMMAND TO GIVE FILE SPECIFICATION . . . . . . . . . . 15
; 11. STRING COMMAND . . . . . . . . . . . . . . . . . . . . . . . 16
; 12. LIST COMMAND TO SPECIFY OUTPUT FILE AND BEGIN. . . . . . . . 17
; 13. SEARCH ROUTINE . . . . . . . . . . . . . . . . . . . . . . . 19
; 14. SCAN ROUTINE TO SCAN INPUT FILE. . . . . . . . . . . . . . . 21
; 15. INCLUD - ROUTINE TO PRINT A MATCH. . . . . . . . . . . . . . 22
; 16. STRING COMPARISON ROUTINE. . . . . . . . . . . . . . . . . . 23
; 17. NXTFIL ROUTINE TO RETURN NEXT FILE . . . . . . . . . . . . . 24
; 18. MORE ROUTINE TO MAP NEXT FILE SEGMENT. . . . . . . . . . . . 27
; 19. STSINT STATUS INTERRUPT ROUTINE. . . . . . . . . . . . . . . 28
; 20. SKPINT - SKIP FILE INTERRUPT ROUTINE . . . . . . . . . . . . 29
; 21. THE DATA AREA. . . . . . . . . . . . . . . . . . . . . . . . 30
SUBTTL REVISION HISTORY
;REVISION HISTORY:
; 1 JGZ 7-AUG-80
; START KEEPING THE REVISION HISTORY NOW THAT AT LEAST 70%
; OF THE CODE IS IN.
;
; 2 JGZ 10-AUG-80
; REMOVE SRCDON CONSTRUCT, INSTALL CONTROL-A INTERRUPT.
;
; 3 JGZ 21-AUG-80
; USE THE NAME "FIND" FOR THE PROGRAM.
;
; 4 JGZ 22-AUG-80
; MAKE CONTROL-A DO TDEC INSTEAD OF DECOUT.
;
; 5 JGZ 24-AUG-80
; TRY USING PRELOADING PMAPS TO SEE IF IT HELPS.
;
; 6 JGZ 26-AUG-80
; SET MATCH COUNTER TO ZERO BEFORE CALLING SEARCH.
;
; 7 JGZ 26-AUG-80
; CHANGE LISTING FORMAT A BIT, MOVE BLANK LINES.
;
; 10 JGZ 26-AUG-80
; PUT A TAB IN THE SEPARATOR IN MODULE-NAME-ONLY FORMAT
; BETWEEN THE FILENAME AND STRING.
;
; 11 JGZ 28-AUG-80
; ADD MATCHF VARIABLE TO COUNT NUMBER OF FILES WITH MATCHES.
; ADD SUMMARY LINE TO LIST COMMAND GIVING MATCHC AND MATCHF.
;
; 12 JGZ 12-SEP-80
; ADD CONTROL-E ABORT OF LIST COMMAND.
;
; 13 JGZ 12-SEP-80
; ADD THE GIVE COMMAND SO PEOPLE WHO WANT TO CAN SEE EACH
; FILENAME AS SEARCHED.
;
; 14 JGZ 16-OCT-80
; MAKE MODULE-NAME-ONLY COUNT UP MATCH FILES IN MATCHF.
;
; 15 JGZ 18-OCT-80
; HANDLE OFF-LINE FILES IN THE SEARCH LIST MORE GRACEFULLY.
;
; 16 JGZ 16-DEC-80
; MORE OFF-LINE FILES FIX. CRLF AFTER MESSAGE.
;
; 17 JGZ 18-DEC-80
; PRETTY UP PLURAL SYNTAX FOR MATCH COUNT TYPEOUT.
;
; 20 JGZ 1-JAN-80
; SOME CODE CLEANUP AND START ADDING ^X INTERRUPT.
;
; 21 JGZ 1-JAN-80
; FINISH REST OF CONTROL-X INTERRUPT HANDLING. IMPROVE
; ERROR HANDLING IN NXTFIL FOR SOME RECOVERABLE CASES AND
; GIVE FILENAME ON MORE UNRECOVERABLE ONES.
;
; 22 JGZ 7-JAN-80
; BE SURE CONTROL-A AND CONTROL-X ARE TURNED OFF ON CONTROL-E
; PATH OUT OF THE CODE.
;
; 23 JGZ 9-JAN-80
; START ADDING STRUCTURES FOR HANDLING FILES LARGER THAN
; THE INTERNAL BUFFER EVENTUALLY.
;
; 24 JGZ 9-JAN-80
; HANDLE STRING NUMBER IN SCAN DIFFERENTLY TO REMOVE MULTIPLY.
; MAKE A FEW OTHER TINY SPEEDUPS IN SCAN.
;
; 25 JGZ 9-JAN-80
; STRIP CONTROL-V FROM SEARCH STRINGS.
;
; 26 JGZ 11-JAN-80
; ONE MORE PLACE TO CHANGE P6 USAGE (INCLUD).
;
; 27 JGZ 17-FEB-80
; PUT NUMBERS ON THE FILES AND STRINGS TO REFER TO LATER.
;
; 30 JGZ 20-FEB-80
; CLEAN UP THE LISTING A BIT
;
; 31 JGZ 24-FEB-80
; TURN PRINT TO PRINT. IN INCLUDE. MATCH STRING WAS NOT
; BEING OUTPUT, GETTING "0(P6)" INSTEAD.
;
; 32 JGZ 10-MAR-81
; MARK OJFN CLOSED AFTER CLOSING IT IN LSTFIN.
;
; 33 JGZ 12-MAR-81
; INSTALL TEMPORARY CODE TO JUST INFORM AND SKIP FILES TOO
; LARGE FOR INTERNAL BUFFER.
;
; 34 JGZ 18-MAR-81
; DO SETSN TO SEE ACCUMULATED SUBSYSTEM STATISTICS.
;
; 35 JGZ 22-JAN-82
; CONVERT TO USE ZSUBS. BEGIN MAJOR VERSION TWO.
;
; 36 JGZ 26-JAN-82
; TEXT MACRO IS NOW IN ZSUBS TOO. USE LERROR IN A FEW PLACES.
;
; 37 JGZ 26-JAN-82
; ADD OMIT COMMAND TO COMPLEMENT GIVE COMMAND. ADD RESET
; COMMAND OPTIONS.
;
; 40 JGZ 27-JAN-82
; START ADDING THE BIG FILE SEGMENTATION CODE. UPDATE THE
; HELP TEXT.
;
; 41 JGZ 27-JAN-82
; PUT THE OFFLINE FILE SKIPPED TYPEOUTS UNDER THE "GIVE"
; REPORTING MODE BIT. COUNT FILES ABORTED AND SKIPPED FOR STATS.
; PRINT THE TOTAL ON THE FINAL STATUS LINE.
;
; 42 JGZ 28-JAN-82
; MAKE USE OF THE NEW TYPJFN/PRTJFN ZSUBS LUUOS TO OUTPUT
; FILESPECS.
;
; 43 JGZ 28-JAN-82
; FINISH THE BIG FILE SEGMENTATION CODE AND TURN IT ON WITH
; A SMALL SEGMENT SIZE FOR DEBUGGING. NOTE - THE ADJUSTMENTS
; NEEDED ARE VERY MESSY, AND ALSO THE DESTINATION CROCK FOR
; THE EXTEND INSTRUCTION MUST BE RE-INITIALIZED!
;
; 44 JGZ 28-JAN-82
; MUST STORE FILENAME STRINGS IF WANT TO CONTINUE TO USE
; THEM...
;
; 45 JGZ 30-JAN-82
; PERFORMANCE IMPROVEMENT - DON'T COUNT LINES IF DOING
; MODULE-NAME-ONLY REPORTING.
; (MEASURES ABOUT 10 PER CENT BETTER ON CPU TIME)
;
; 46 JGZ 2-FEB-82
; FIX AWFUL BUG WHERE MATCH CHARACTER IS LAST CHARACTER OF
; SEGMENT AND P1 FIXUP IS NOT RIGHT.
;
; 47 JGZ 3-FEB-82
; CLEAN UP LISTING, DEFINE SEGMENTATION SYMBOLS SO NOT AS MUCH
; BUGGY EXPRESSION ARITHMETIC, REMOVE BYTCNT VARIABLE, NEW
; TABLE OF CONTENTS.
;
; 50 JGZ 24-FEB-82
; TEST PERIOD OVER, PUT BUFFER SIZE BACK TO LARGE VALUE.
;
SUBTTL DEFINITIONS
;DEFAULT PARAMETERS:
MAXFIL==^D16 ;MAXIMUM NUMBER OF JFNS TO ALLOW
MAXSTR==^D16 ;MAXIMUM NUMBER OF STRINGS TO ALLOW
STRSIZ==^D8 ;SIZE OF A STRBUF ENTRY
BUFFER==10000 ;BUFFER STARTS AT PAGE 10
BUFSIZ==670 ;MAX PAGES TO MAP
SEGSIZ==BUFSIZ ;SEGMENTATION PARAMETERS
SEGPG==BUFSIZ ;NUMBER OF PAGES IN SEGMENT
SEGWD==SEGPG*PGSIZ ;NUMBER OF WORDS IN SEGMENT
SEGBY==SEGWD*5 ;NUMBER OF BYTES IN SEGMENT
;FLAGS:
FL%MNO==1B0 ;MODULE-NAMES-ONLY OUTPUT FORMAT IF SET
FL%FNO==1B1 ;FILE NAME HAS BEEN OUTPUT
FL%GEF==1B2 ;GIVE EVERY FILENAME WHILE SEARCHING
FL%NOX==1B3 ;CRITICAL REGION - DON'T TAKE ^X NOW
FL%BIG==1B4 ;FILE IS TOO BIG FOR INTERNAL BUFFER
;CONSTANTS:
INTCHN==0 ;CHANNEL FOR ^E INTERRUPT
STSCHN==1 ;CHANNEL FOR STATUS (^A) INTERRUPT
SKPCHN==2 ;CHANNEL FOR SKIP FILE (^X) INTERRUPT
PGSIZ==1000 ;SIZE OF A PAGE
PGSFT==^D9 ;NUMBER OF BITS FOR PAGE SHIFTING
RES.ST==1B35 ;RESET SEARCH STRINGS CODE
RES.FN==1B34 ;RESET FILENAMES LIST CODE
RES.LM==1B33 ;RESET LISTING MODE CODE
RES.RM==1B32 ;RESET REPORTING MODE CODE
SUBTTL ENTRY VECTOR AND INITIALIZATION
EVEC: JRST FIND ;START
JRST REEN ;REENTER
BYTE (3)VWHO(9)VMAJOR(6)VMINOR(18)VEDIT ;VERSION
FIND: RESET ;CLEAR EVERYTHING
SETZ F, ;CLEAR ALL FLAGS
$INIT ;INITIALIZE ZSUBS PACKAGE
TYPE <FIND %> ;TYPE BANNER AND VERSION
VERSIO EVEC+2 ;OUTPUT VERSION NUMBER
TYPE <
> ;AND A CRLF
DMOVE T1,[EXP 'FIND ','FIND ']
SETSN ;SET OUR SYSTEM NAME TO GATHER STATISTICS
ERJMP .+1 ;FORGET ERRORS HERE
SETZM FILCNT ;NO FILES GIVEN YET
SETZM STRCNT ;NO STRINGS GIVEN YET
REEN: MOVE P,[IOWD PDLSIZ,PDL] ;SET UP A STACK
SETZM OJFN ;CLEAR OUTPUT JFN
MOVE T1,[1,,STSINT] ;SETUP CONTROL-A TRANSFER ADDRESS
MOVEM T1,CHNTAB+STSCHN ;IN THE CHANNEL PSI TABLE
MOVE T1,[1,,SKPINT] ;SETUP CONTROL-X TRANSFER ADDRESS
MOVEM T1,CHNTAB+SKPCHN ;IN THE CHANNEL PSI TABLE
MOVX T1,.FHSLF ;FOR US
MOVX T2,1B<STSCHN>+1B<SKPCHN> ;CHANNELS FOR ^A AND ^X INTERRUPTS
AIC ;SET THEM UP
NEWCMD: HRROI T1,[ASCIZ/FIND>/] ;SET PROMPT
MOVEM T1,CMDBLK+.CMRTY ;IN COMND BLOCK
MOVEI T1,NEWPAR ;AND SET THE
HRRM T1,CMDBLK+.CMFLG ;REPARSE ADDRESS ALSO
PARSE [FLDDB. .CMINI] ;INITIALIZATION FUNCTION
MOVEM P,SAVEP ;SAVE STACK FOR REPARSING
JRST NEWPAR ;AND PARSE A NEW COMMAND
PARERR: JRST REEN ;REPARSE ADR-1=WHERE TO GO ON ERROR
NEWPAR: MOVE P,SAVEP ;RESTORE THE STACK
SKIPE T1,JFNTMP ;UNLOAD ANY LEFTOVER JFNS
RLJFN ; FROM REPARSING,...
ERJMP .+1 ;DON'T WORRY ABOUT ERRORS
SETZM JFNTMP ;AND MARK THE "JFN STACK" EMPTY
PARSE [FLDDB. (.CMKEY,,CMDTAB)] ;PARSE FROM COMMAND TABLE
MOVE T2,0(T2) ;GET ADDRESS OF ROUTINE
CALL 0(T2) ;CALL IT
JRST NEWCMD ;AND GET A NEW COMMAND
;TABLE OF COMMANDS:
CMDTAB: CMDLEN,,CMDLEN ;HEADER
AA COMPLETE-LISTING,.COMP ;COMPLETE LISTING FORMAT
AA EXIT,.EXIT ;EXIT COMMAND
AA FILES,.FILES ;FILE SPECIFICATION
AA GIVE,.GIVE ;GIVE ALL FILENAMES SEARCHED
AA HELP,.HELP ;TYPE HELP MESSAGE
AA INFORMATION,.INFO ;INFORMATION ABOUT PARAMETERS
AA LIST,.LIST ;LIST COMMAND TO START
AA MODULE-NAMES-ONLY,.MODULE ;ONLY LIST SUCCESSES
AA OMIT,.OMIT ;OMIT GIVING SEARCH FILENAMES
AA PUSH,.PUSH ;PUSH TO A NEW EXEC
AA RESET,.RESET ;RESET PARAMETERS
AA STRING,.STRING ;STRING SPECIFICATION
AA TAKE,.TAKE ;TAKE COMMANDS FROM FILE
CMDLEN==.-CMDTAB-1 ;NUMBER OF COMMANDS
SUBTTL THE SIMPLE COMMANDS - HELP
;THE "HELP" COMMAND.
.HELP: NOISE (WITH COMMANDS) ;DO GUIDEWORDS
CONFRM ;CONFIRM THE LINE
TYPE. HLPTXT ;TYPE THE HELP TEXT
RET ;AND DONE
HLPTXT: TEXT <
FIND is a program to search lists of files for lists of strings and
to report on matches, for instance, to find all references to a given
symbol in a group of modules.
The commands are:
COMPLETE-LISTING Specify complete listing format, which consists
of the filename, string, line number and line which
contains the match string for each match.
EXIT Exit the program.
FILES Specify a possibly wild file specification to be
searched. A maximum of 16 such specifications may
be given.
GIVE Give the names of all files as they are searched.
HELP Type this text.
INFORMATION List the currently active parameters: Files to
search, search strings, listing format.
LIST Specify the file to list to (default is TTY:) and
begin the search process. A Control-A character
will output the name of the file currently being
searched. A Control-E character will abort the
search. A Control-X will abort the current file.
MODULE-NAMES-ONLY Specifies quick listing format. Output listing
consists only of the filename of any file containing
a match along with the first match string in that
file. Searching of the file stops after the first
match occurs. This listing format is faster and
more compact than the complete listing.
OMIT Do not give the names of files as they are searched.
PUSH Transfer control to an EXEC in an inferior fork.
RESET Reset parameters: files, strings, listing format.
No longer done implicitly after every LIST command.
STRING Specify a search string. Limit is 39 characters.
Upper and lower case are considered identical.
A maximum of 16 strings may be specified.
TAKE Take commands from the given file.
[End of FIND.HLP]
>
SUBTTL RESET COMMAND TO RESET PARAMETERS
;HERE TO PROCESS THE RESET COMMAND TO CLEAR FILENAMES, STRINGS, FLAGS SET.
.RESET: NOISE (PARAMETER) ;GUIDEWORDS
PARSE [FLDDB. (.CMKEY,,RESTAB,,<ALL>)] ;GET WHAT OPTION
HRRZ P1,0(T2) ;FETCH THE APPROPRIATE FLAGS
CONFRM ;CONFIRM THE LINE
RESET0:
SETOM T1 ;FOR UNMAPPING
MOVE T2,[.FHSLF,,BUFFER_-PGSFT]
MOVX T3,PM%CNT+SEGPG ;FLUSH ALL THE PAGES
PMAP ;SO CLOSES WILL WORK
ERJMP LOSE
;SEARCH STRINGS
TXNE P1,RES.ST ;RESET STRINGS?
SETZM STRCNT ; YES, ZERO NUMBER OF STRINGS GIVEN
;FILES
TXNN P1,RES.FN ;RESET FILES?
JRST RESET2 ; NO, GO ON
SETZM FILCNT ;MARK NONE IN LIST
SETZM FILJFN ;AND MARK NONE IN USE
;LISTING MODE
RESET2: TXNE P1,RES.LM ;LISTING MODE?
TXZ F,FL%MNO ; YES, CLEAR MODULE NAME ONLY FLAG
;GIVE FILENAMES MODE
TXNE P1,RES.RM ;FILENAME REPORTING MODE?
TXZ F,FL%GEF ; YES, CLEAR GIVE EVERY FILE FLAG
RET ;AND ALL DONE
;TABLE OF RESET OPTIONS
RESTAB: RESLEN,,RESLEN
AA ALL,RES.ST!RES.FN!RES.LM!RES.RM
AA FILES,RES.FN
AA LISTING-MODE,RES.LM
AA REPORTING-MODE,RES.RM
AA STRINGS,RES.ST
RESLEN==.-RESTAB-1
SUBTTL INFORMATION COMMAND TO TELL PARAMETERS
;HERE TO PROCESS THE INFORMATION COMMAND TO REGURGITATE THE INPUTS.
.INFO: NOISE (ABOUT PARAMETERS) ;GUIDEWORDS
CONFRM ;CONFIRM THE COMMAND
TYPE <
Files to search specified are:
> ;LEADIN
MOVN P1,FILCNT ;-COUNT
HRLZS P1 ;TO LH FOR AOBJN
JUMPE P1,INFO2 ;GO IF NONE
INFO1: MOVEI T2,1(P1) ;BUILD A NUMBER
TDEC T2,6 ;OUTPUT THE NUMBER
TYPE < > ;A COUPLE OF SPACES
MOVEI T2,0(P1) ;NUMBER
IMULI T2,STRSIZ*5 ;POINT TO STRING START
TYPE. FILLST(T2) ;TYPE IT OUT
TYPE <
> ;FINISH LINE WITH CRLF
AOBJN P1,INFO1 ;AND LOOP FOR ALL
INFO2: TYPE <
Strings to search for are:
> ;LEADIN
MOVN P1,STRCNT ;-COUNT
HRLZS P1 ;TO LH FOR AOBJN
JUMPE P1,INFO4 ;GO IF NONE
INFO3: HRRZ T1,P1 ;STRING NUMBER
MOVEI T2,1(T1) ;AND START WITH ONE FOR TYPEOUT
TDEC T2,6 ;OUTPUT THE NUMBER
TYPE < > ;A COUPLE OF SPACES
IMULI T1,STRSIZ ;STRING NUMBER TIMES BLOCKSIZE
TYPE. STRBUF(T1) ;TYPE THE STRING
TYPE <
> ;FINISH LINE WITH A CRLF
AOBJN P1,INFO3 ;AND LOOP FOR ALL
;...
INFO4: TXNN F,FL%MNO ;CHECK LISTING FORMAT
TYPE <
Listing format is complete listing.
>
TXNE F,FL%MNO ;FOR EITHER CASE
TYPE <
Listing format is module name only on matches.
>
TYPE <
Filenames will> ;LEADIN
TXNN F,FL%GEF ;GIVING ALL NAMES?
TYPE < not> ;YES
TYPE < be typed for each file as searched.
> ;FINISH FILENAME TYPEOUT MODE
RET ;ALL DONE
SUBTTL TYPEOUT FORMATTING SELECTION COMMANDS
;HERE TO PROCESS THE MODULE-NAMES-ONLY COMMAND. SETS FL%MNO SO THAT
;THE OUTPUT FORMAT AND SEARCH ARE QUICKER.
.MODULE: NOISE (LISTING FORMAT) ;GUIDEWORDS
CONFRM ;CONFIRM THE COMMAND
TXO F,FL%MNO ;TURN ON THE FLAG TO SAY SO
RET ; AND ALL DONE
;HERE TO PROCESS THE COMPLETE-LISTING COMMAND. CLEARS FL%MNO SO THAT
;ALL THE OUTPUT AND SEARCHING ARE DONE.
.COMP: NOISE (LISTING FORMAT) ;GUIDEWORDS
CONFRM ;CONFIRM THE COMMAND
TXZ F,FL%MNO ;CLEAR THE FLAG
RET ; AND ALL DONE HERE
;HERE TO PROCESS THE GIVE COMMAND. SETS FL%GEF SO THAT ALL NAMES ARE
;TYPED AS THE FILES ARE PROCESSED.
.GIVE: NOISE (ALL FILENAMES AS THEY ARE SEARCHED) ;GUIDEWORDS
CONFRM ;CONFIRM THE INTENT
TXO F,FL%GEF ;SET THE BIT
RET ; AND WE ARE DONE
;HERE TO PROCESS THE OMIT COMMAND. CLEARS FL%GEF SO THAT ALL NAMES ARE
;NOT TYPED AS THE FILES ARE PROCESSED.
.OMIT: NOISE (ALL FILENAMES AS THEY ARE SEARCHED) ;GUIDEWORDS
CONFRM ;CONFIRM THE COMMAND
TXZ F,FL%GEF ;CLEAR THE FLAG
RET ; AND ALL DONE
SUBTTL FILES COMMAND TO GIVE FILE SPECIFICATION
;HERE TO PROCESS THE FILES COMMAND TO GET ANOTHER JFN FOR FILES TO
;SEARCH AND PUT IT ON THE LIST.
.FILES: NOISE (TO SEARCH) ;GUIDEWORDS
MOVX T2,GJ%OLD!GJ%IFG!GJ%FLG ;EXISTS, WILD, RETURN FLAGS
MOVEM T2,JFNBLK+.GJGEN ;SET UP GTJFN FLAGS
HRROI T2,[ASCIZ/*/] ;SETUP DEFAULTS FOR
MOVEM T2,JFNBLK+.GJNAM ;FILENAME
MOVEM T2,JFNBLK+.GJEXT ;EXTENSION
PARSE [FLDDB. (.CMFIL,,,,<*.*.0>)] ;GET THE INPUT FILE
MOVEM T2,JFNTMP ;SAVE THE JFN
CONFRM ;CONFIRM THE LINE
MOVE T1,FILCNT ;GET THE COUNT
CAILE T1,MAXFIL ;TOO MANY?
ERROR <Too many files> ;YUP
IMULI T1,STRSIZ*5 ;TIMES THE SPEC SIZE
HRROI T1,FILLST(T1) ;POINT TO BUFFER
MOVE T2,JFNTMP ;GET THE JFN AGAIN
MOVX T3,JS%SPC ;FULL SPEC
JFNS ;SAVE THE STRING
ERJMP LOSE
MOVE T1,T2 ;JFN BACK
RLJFN ;DON'T NEED IT ANYMORE
ERJMP .+1 ;LET THEM PILE UP IF FAILS
SETZM JFNTMP ;MARK NO JFN TO FLUSH
AOS FILCNT ;BUMP THE COUNT
RET ; AND WE ARE DONE
SUBTTL STRING COMMAND
;HERE TO PROCESS THE STRING COMMAND TO GET A SEARCH STRING AND PUT
;IT IN THE STRING LIST.
.STRING: NOISE (TO SEARCH FOR) ;GUIDEWORDS
PARSE [FLDDB. (.CMTXT,CM%SDH,,<Substring to locate>)]
MOVE P1,[POINT 7,ATMBUF] ;POINT TO THE INPUT
MOVE P2,STRCNT ;NUMBER IN USE
IMULI P2,STRSIZ ;TIMES SIZE
ADDI P2,STRBUF ;PLUS START OF BUFFER
HRLI P2,(POINT 7,) ;AND LH BUILDS BYTE POINTER
MOVX P3,STRSIZ*5-1 ;MAX CHARACTERS IN STRING
STRIN1: ILDB T1,P1 ;GET NEXT BYTE
JUMPE T1,STRIN2 ;DONE ON NULL
CAIE T1,.CHCNV ;REMOVE ANY CONTROL-V'S
CAIN T1,.CHCRT ;IGNORE CARRIAGE RETURNS
JRST STRIN1 ;IN STRING
CAIN T1,.CHLFD ;OR LINEFEED
JRST STRIN2 ;TERMINATE
CAIL T1,"a" ;TURN LOWERCASE TO UPPER
CAILE T1,"z" ;WITH USUAL CODE
SKIPA
SUBI T1,"a"-"A"
IDPB T1,P2 ;STORE BYTE
SOJG P3,STRIN1 ;LOOP FOR 39 CHARS AT MOST
STRIN2: MOVEI T1,0 ;END WITH A NULL
IDPB T1,P2 ;TO TERMINATE STRING
CONFRM ;CONFIRM THE COMMAND
SKIPN P3 ;STRING TOO LONG?
WARN <Search string truncated to 39 characters>
MOVE T1,STRCNT ;CURRENT NUMBER
CAILE T1,MAXSTR ;SPACE LEFT?
ERROR <Maximum number of strings already in use>
CAIE P3,STRSIZ*5-1 ;BY THE BY, WAS THERE ANYTHING THERE?
AOS STRCNT ;YES, COUNT THE STRING
RET ;AND ALL DONE
SUBTTL LIST COMMAND TO SPECIFY OUTPUT FILE AND BEGIN
;HERE TO PROCESS LIST COMMAND. SPECIFY OUTPUT FILESPEC AND BEGIN THE
;PROCESSING OF THE SEARCH.
.LIST: NOISE (OUTPUT TO FILE) ;GUIDEWORDS
PARSE [FLDDB. (.CMOFI,,,,<TTY:>)] ;SETUP AND GET FILESPEC
MOVEM T2,JFNTMP ;SAVE JFN IN JFN STACK
NOISE (AND BEGIN) ;MORE GUIDEWORDS
CONFRM ;CONFIRM THE COMMAND
SKIPN FILCNT ;ANY FILES TO DO?
ERROR <No files specified>
SKIPN STRCNT ;ANY STRINGS TO DO?
ERROR <No search strings specified>
MOVE T1,JFNTMP ;GET THE JFN
MOVEM T1,OJFN ;MAKE IT THE OUTPUT JFN
SETZM JFNTMP ;MARK JFN STACK EMPTY
MOVE T1,OJFN ;OUTPUT FILE JFN
MOVX T2,OF%WR+FLD(7,OF%BSZ) ;ASCII MODE
OPENF ;DO OPEN
ERJMP [LERROR <Cannot open output file>]
SETZM MATCHC ;ZERO COUNT OF MATCHES
SETZM MATCHF ; AND NUMBER OF FILES WITH MATCHES
SETZM FSKIP ; AND NUMBER SKIPPED OR ABORTED
SETABT LSTABT ;SET UP THE CONTROL-E INTERRUPT
CALL SEARCH ;GO DO IT
LSTFIN: CLRABT ;CLEAR ANY ACTIVE CONTROL-E CHANNEL
MOVX T1,.TICCA ;NO MORE FILES TO DO
DTI ;SO CLEAR CONTROL-A
ERJMP LOSE
MOVX T1,.TICCX ;AND ALSO
DTI ;CLEAR CONTROL-X
ERJMP LOSE
;...
;NOW PRINT OUT THE TERMINATION FILES STATISTICS (FALL THROUGH)
PRINT <
Total of > ;START SUMMARY LINE
DECOUT MATCHC ;DO NUMBER OF MATCHES
PRINT < match> ;MORE TEXT
MOVE T1,MATCHC ;GET COUNT
CAIE T1,1 ;CHECK THE SINGULAR CASE
PRINT <es> ;HANDLE PLURAL
PRINT <, > ;MORE TEXT
DECOUT MATCHF ;DO NUMBER OF FILES WITH MATCHES
PRINT < file> ;TEXT
MOVE T1,MATCHF ;GET FILE COUNT
CAIE T1,1 ;CHECK FOR THE SINGULAR CASE
PRINT <s> ;DO PLURAL
PRINT < contained matches, >
DECOUT FSKIP ;DO THE NUMBER SKIPPED
PRINT < files skipped or aborted
> ;FINAL TEXT
SKIPE T1,OJFN ;GET THE OUTPUT JFN
CLOSF ; AND CLOSE IT
ERJMP [LERROR <Cannot close output file>]
SETZM OJFN ; MARK IT CLOSED
RET ;DONE, PRESERVE FILES, STRINGS,...
;HERE ON CONTROL-E ABORT OF LIST COMMAND
LSTABT: MOVX T1,.PRIOU ;CLEAR THE
CFOBF ;OUTPUT IN PROGRESS
ERJMP LOSE
WARN Command aborted
MOVE P,SAVPSI ;PUT STACK BACK TO KNOWN VALUE
CALLRET LSTFIN ;FINISH UP THE NORMAL WAY
SUBTTL SEARCH ROUTINE
;SEARCH - ROUTINE TO DO THE ACTUAL SEARCH. ENTERED WITH THE PARAMETERS
;ALREADY SETUP FOR THE SEARCH.
;RETURNS +1: ALWAYS, ON COMPLETION OF THE SEARCH
SEARCH: MOVE T1,[CTBL,,XTBL] ;COPY OVER THE BASE TABLE
BLT T1,XTBL+^D63 ;WITH NORMAL BLT
MOVE T1,[.CHLFD,,.CHLFD+1] ;ASSUME NO BREAK ON LF
TXNN F,FL%MNO ;MODULE-NAME-ONLY?
TXO T1,<100000,,0> ; NO - SET OPCODE TO BREAK ON LF
MOVEM T1,XTBL+<.CHLFD/2> ;SET WORD
MOVN T1,STRCNT ;NUMBER OF STRINGS
HRLZS T1 ;AOBJN POINTER
SEARC0: HRRZ T2,T1 ;OFFSET
IMULI T2,STRSIZ ;TIMES SIZE
MOVE T3,[POINT 7,STRBUF(T2)] ;POINT AT STRING
ILDB T3,T3 ;AND GET FIRST BYTE
MOVE T2,[POINT 18,XTBL] ;POINT TO TABLE
MOVE T4,T3 ;COPY CHARACTER
ADJBP T4,T2 ;UPDATE BYTE POINTER
ILDB T2,T4 ;GET BYTE
TXO T2,100000 ;OPCODE TO TERMINATE TRANSLATION
DPB T2,T4 ;PUT BYTE BACK
CAIL T3,"A" ;IF ALPHABETIC, THEN
CAILE T3,"Z" ;MUST SET LOWERCASE BYTE ALSO
SKIPA
JRST [ ADDI T3,"a"-"A" ;GET LOWERCASE VALUE
MOVE T2,[POINT 18,XTBL] ;START OF TABLE
ADJBP T3,T2 ;POINT TO L/C BYTE
ILDB T2,T3 ;GET BYTE
TXO T2,100000 ;SET TERMINATE OPCODE
DPB T2,T3 ;PUT BYTE BACK
JRST .+1] ;CONTINUE INLINE
AOBJN T1,SEARC0 ;LOOP FOR ALL STRINGS
SETZM FILJFN ;ZERO FILJFN SO IT GETS THE FIRST
MOVE T1,[.TICCA,,STSCHN] ;SETUP CONTROL-A
ATI ;TO GO TO STSINT
ERJMP LOSE
SEARCX: MOVE T1,[.TICCX,,SKPCHN] ;SETUP CONTROL-X
ATI ;TO GO EVENTUALLY TO SKPABT
ERJMP LOSE
MOVEM P,SAVEPX ;RECORD THE CURRENT STACK POSITION
;...
;...
SEARC1: TXO F,FL%NOX ;SET CONTROL-X CRITICAL REGION
CALL NXTFIL ;SETUP THE NEXT FILE TO DO
JRST [ MOVX T1,.TICCA ;NO MORE FILES TO DO
DTI ;CLEAR CONTROL-A
ERJMP LOSE
MOVX T1,.TICCX ;AND ALSO
DTI ;CLEAR CONTROL-X
ERJMP LOSE
RET] ;RETURN
TXZ F,FL%NOX!FL%FNO ;END CRITICAL REGION, MARK FILENAME NOT OUTPUT
TXNE F,FL%GEF ;DOES USER WANT TO SEE ALL NAMES?
JRST [ TYPE <Searching > ;LEADIN
TYPJFN FILJFN,FULL ;YES, GIVE IT TO HIM
TYPE <
> ;AND A NEW LINE
JRST .+1] ;THEN CONTINUE IN LINE
MOVEI T1,1 ;FILE STARTS ON LINE ONE
MOVEM T1,LINENO ;SO INIT LINE COUNT
MOVE P1,FBYTCT ;GET FILE BYTE COUNT
TXNE F,FL%BIG ;BIG FILE?
MOVX P1,SEGBY ; YES, USE SEGMENT SIZE INSTEAD
MOVE P2,[POINT 7,BUFFER] ;SOURCE BYTEPOINTER
MOVEM P2,LINPTR ;SET INITIAL LINE POINTER ALSO
SETZB P3,P6 ;THESE ACS ARE UNUSED
DMOVE P4,[ EXP 5 ;AND SET UP ONE WORD DESTINATION CROCK
POINT 7,DSTBUF]
CALL SCAN ;DO THE SCAN
JRST SEARC1 ;LOOP TIL DONE WITH ALL
;SKPABT - ROUTINE TO HANDLE THE CONTROL-X SKIP FILE ABORT
;TYPES OUT THE FILENAME, ADJUSTS THE STACK AND CONTINUES
SKPABT: MOVX T1,.PRIOU ;WAIT FOR THE
DOBE ; OUTPUT STREAM TO COMPLETE
TYPE <Aborting search of > ;LEADIN TO FILENAME
TYPJFN FILJFN,FULL ;TYPE THE FILENAME
TYPE <
> ;FINISH THE LINE
AOS FSKIP ;COUNT THE FILE
MOVE P,SAVEPX ;ADJUST THE STACK,
JRST SEARCX ; AND CONTINUE WITH THE NEXT FILE
SUBTTL SCAN ROUTINE TO SCAN INPUT FILE
;SCAN - HERE WE USE A MOVST TO SCAN THE INPUT FILE BYTE BY BYTE AND
;HAVE IT BREAK ON LINE FEEDS AND THE FIRST CHARACTER (UPPER OR LOWER
;CASE) OF STRINGS WHICH MAY MATCH THE TARGET KEYWORDS. ON A BREAK,
;WE THEN DETERMINE WHAT TO DO FROM THERE, DO IT, AND COME BACK TO
;SCAN AGAIN.
;ACCEPTS:
; P1-P5/ SETUP FOR MOVST INSTRUCTION
;
; CALL SCAN
;
;RETURNS +1: ALWAYS, AT END OF FILE
SCAN: EXTEND P1,[ MOVST XTBL ;DO THE SCAN
EXP 0] ;FILL
SKIPA ;TERMINATED ON CHARACTER
JRST [ TXNN F,FL%BIG ;NEED TO DO MORE?
RET ; NO, OUT OF FILE TO PROCESS
CALL MORE ;YES, DO THE NEEDED MAP, ADJUSTMENTS
MOVE T1,FBYTCT ;FILE BYTE COUNT
IDIVI T1,SEGBY ;NUMBER OF BYTES
MOVE P1,T2 ;GET REMAINDER IF NOW NON-BIG
TXNE F,FL%BIG ;STILL BIG?
MOVX P1,SEGBY ; YES, USE NUMBER OF BYTES IN BUFFER
JRST SCAN] ; AND CONTINUE WITH THE SCAN
LDB T2,P2 ;GET THE TERMINATOR
CAIN T2,.CHLFD ;LINE FEED?
JRST [ AOS LINENO ;YES, COUNT IT
MOVEM P2,LINPTR ;SAVE POINTER TO START OF LINE
JRST SCAN] ; AND CONTINUE
MOVN P6,STRCNT ;NUMBER OF STRINGS
HRLZS P6 ;BUILD AOBJN POINTER
HRRI P6,<STRBUF-STRSIZ+1> ;PRESET FOR FIRST STRING
SCAN1: SETO T2, ;-1
ADJBP T2,P2 ;GET ADJUSTED POINTER FOR ILDB
MOVEM P1,SCNSVP ;SAVE OLD POINTER IN CASE NO MATCH
ADDI P6,<STRSIZ-1> ;POINT TO NEXT STRING
HRRZ T1,P6 ;COPY ADDRESS
HRLI T1,(<POINT 7,0>) ;AND BUILD A BYTE POINTER TO STRING
CALL STRCMP ;DO THE STRING COMPARE
JRST [ MOVE P1,SCNSVP ;RESTORE P1 ON MATCH FAILURE
AOBJN P6,SCAN1 ;LOOP FOR ALL STRINGS...
JRST SCAN] ; AND CONTINUE SCAN WHEN NO MORE
AOS MATCHC ;COUNT MATCH
MOVE P2,T2 ;UPDATE POINTER
CALL INCLUD ;A MATCH, GENERATE OUTPUT
TXNN F,FL%MNO ;MODULE-NAMES-ONLY?
AOJA P1,SCAN ;NO, LOOP, MAKING UP FOR EARLIER ADJBP COUNT
RET ;YES, ONE OUTPUT IS ENOUGH
SUBTTL INCLUD - ROUTINE TO PRINT A MATCH
;INCLUD - HERE TO OUTPUT A MATCH
;
; P6/ -N,,ADDRESS OF MATCH STRING
; LINPTR/ BEGINNING OF LINE CONTAINING MATCH
INCLUD: TXNN F,FL%MNO ;MODULE-NAMES-ONLY?
JRST INCLUA ;NO
PRTJFN FILJFN,FULL ;YES, OUTPUT THE FILENAME
PRINT < (> ;OPEN PAREN
PRINT. 0(P6) ;PRINT MATCH STRING
PRINT <)
> ;END WITH A CRLF
AOS MATCHF ;COUNT THE FILE FOR A MATCH
RET ;AND DONE
;HERE TO DO THE FULL-BLOWN OUTPUT
INCLUA: TXOE F,FL%FNO ;FILE NAME OUTPUT YET?
JRST INCLU1 ;YES, JUST DO MATCH STRING
AOS MATCHF ;COUNT THE FILE THE FIRST TIME
PRTJFN FILJFN,FULL ;OUTPUT THE FILENAME
PRINT <
> ;BLANK LINE
INCLU1: PRINT <(Line > ;OPEN PAREN
DECOUT LINENO ;GIVE LINE NUMBER
PRINT <: > ;DELIMIT
PRINT. 0(P6) ;PRINT MATCH STRING
PRINT <)
> ;CLOSE PAREN
MOVE T1,OJFN ;GET OUTPUT JFN (PRINT. NOT GOOD ENOUGH)
MOVE T2,LINPTR ;POINT TO START OF LINE
MOVEI T3,^D128 ;DO THIS MANY CHARS MAX
MOVEI T4,.CHLFD ;OR TERMINATE ON LINEFEED
SOUT ;OUTPUT THE LINE WITH THE MATCH
ERJMP LOSE
PRINT <
> ;FINISH WITH BLANK LINE
RET ;AND DONE FOR NOW
SUBTTL STRING COMPARISON ROUTINE
;STRCMP THIS ROUTINE PERFORMS THE FILE TO TARGET STRING COMPARE.
;
; T1/ BYTE POINTER TO THE TARGET PATTERN
; T2/ BYTE POINTER INTO THE INPUT FILE
;
; CALL STRCMP
;RETURNS: +1: IF THE MATCH IS UNSUCCESSFUL
; +2: IF THE MATCH IS SUCCESSFUL, P1 COUNTED
STRCMP: ILDB T3,T1 ;GET BYTE FROM PATTERN STRING
JUMPE T3,RSKP ;A MATCH IF AT END, SKIP RETURN
ILDB T4,T2 ;GET BYTE FROM TEST STRING
SOJL P1,[TXNN F,FL%BIG ;MORE FILE MAYBE?
RET ;NO
DMOVEM T1,STRSV2 ;SAVE T1,T2
CALL MORE ;YES, MAP, ADJUST
DMOVE T1,STRSV2 ;GET T1,T2 BACK
SUBI T2,<SEGWD-PGSIZ> ;ADJUST T2 WORD ADDRESS DOWN
ILDB T4,T2 ; OTHER ONE ALSO
LDB T3,T1 ;GET BYTE BACK
JRST .+1] ;AND CONTINUE
CAIL T4,"a" ;CONVERT OCCURRENCES OF
CAILE T4,"z" ; LOWER CASE
SKIPA
SUBI T4,"a"-"A" ; TO UPPER CASE
CAMN T3,T4 ;THE COMPARE
JRST STRCMP ;MATCH SO FAR, CONTINUE
RET ;DIFFERENCE, RETURN NONSKIP
SUBTTL NXTFIL ROUTINE TO RETURN NEXT FILE
;NXTFIL - ROUTINE TO RETURN NEXT FILE TO USE.
;ACCEPTS:
; FILJFN/ CURRENT JFN
;
; CALL NXTFIL
;
;RETURNS +1: NO MORE FILES TO PROCESS
; +2: NEXT JFN IS IN FILJFN
;
;UNMAPS AND CLOSES CURRENT FILE AND OPENS AND MAPS NEXT.
;STEPS THROUGH FILLST USING VARIABLE FILSTP AS AN INDEX.
NXTFIL: SKIPN FILJFN ;SEE IF FILE IS IN USE
JRST [ MOVN T1,FILCNT ;START WITH COUNT
HRLZ T1,T1 ;BUILD AOBJN POINTER
MOVEM T1,FILSTP ;AND SET FILSTP
HRROI T2,FILLST ;POINT TO THE FIRST STRING
MOVX T1,GJ%SHT+GJ%IFG!GJ%OLD!GJ%FLG ;WHAT TO LOOK FOR
GTJFN ;GET THE JFN
ERJMP LOSE
MOVEM T1,FILJFN ;SAVE THE JFN
JRST NXTFLO] ;THEN GO OPEN IT
SETOM T1 ;-1 TO UNMAP
MOVE T2,[.FHSLF,,BUFFER_-PGSFT] ;THE PAGES IN BUFFER
HRRZ T3,FSIZE ;NUMBER OF PAGES WE HAVE MAPPED
TXO T3,PM%CNT ;COUNT BIT
PMAP ;UNMAP THE PAGES
ERJMP [WARN <Trouble with file - > ;LEADIN AND
TYPJFN FILJFN,FULL ;LET HIM KNOW WHICH ONE
LERROR <Cannot unmap file pages>] ;THEN DIE
HRRZ T1,FILJFN ;JFN AGAIN
TXO T1,CO%NRJ ;DON'T LOSE JFN
CLOSF ; BUT CLOSE FILE
ERJMP [WARN <Trouble with file - > ;LEADIN AND
TYPJFN FILJFN,FULL ;LET HIM KNOW WHICH ONE
LERROR <Cannot close input file>] ;THEN DIE
;...
;NOW STEP THE CURRENT JFN
NXTFI0: MOVE T1,FILJFN ;GET THE JFN
GNJFN ;STEP IT
ERJMP [CAIE T1,GNJFX1 ;NO MORE?
JRST LOSE ;SOME OTHER ERROR, CROAK
MOVE T1,FILSTP ;GET THE STEP INDEX
AOBJP T1,R ;NO MORE AT ALL!
MOVEM T1,FILSTP ;RESTORE STEP INDEX
HRRZS T1 ;GET THE SPEC NUMBER
IMULI T1,STRSIZ*5 ;TIMES THE SPACE NEEDED
HRROI T2,FILLST(T1) ;POINT TO THE STRING
MOVX T1,GJ%SHT+GJ%OLD+GJ%IFG+GJ%FLG ;TYPE OF GTJFN
GTJFN ;GET A JFN ON IT
ERJMP LOSE
MOVEM T1,FILJFN ;SET IT (GNJFN RELEASED OLD ONE)
JRST .+1] ;AND CONTINUE IN LINE
;OPEN AND MAP THE NEW FILE
NXTFLO: HRRZ T1,FILJFN ;GET JFN PART
MOVX T2,OF%RD ;OPENING JUST FOR READ
OPENF ;TRY THE OPEN
ERJMP [AOS FSKIP ;COUNT UP NUMBER SKIPPED
TXNN F,FL%GEF ;GIVE ALL FILES MODE?
JRST NXTFI0 ; NO, BE SILENT.
HRRZ T1,FILJFN ;GET JFN BACK
MOVE T2,[1,,.FBCTL] ;WANT TO READ JUST .FBCTL
MOVEI T3,T3 ;INTO T3 IS FINE
GTFDB ;READ FDB
ERJMP LOSE
TXNN T3,FB%OFF ;OFF-LINE?
WARN <OPENF failed, skipping file > ;NO, GIVE THIS MESSAGE
TXNE T3,FB%OFF ;OFF-LINE?
WARN <Off-line file skipped - > ;SAY SORRY
TYPJFN FILJFN,FULL ;GIVE THE NAME
TYPE <
> ;CRLF THE LINE
JRST NXTFI0] ;AND TRY ANOTHER
;...
;...
MOVE T2,[2,,.FBBYV] ;WORDS TO READ FROM FDB
MOVEI T3,P1 ;WHERE TO READ THEM
GTFDB ;READ THEM
ERJMP LOSE
HRRZM P1,TFSIZE ;SAVE THE TOTAL FILE SIZE IN PAGES
MOVE T1,TFSIZE ;FETCH THE SIZE BACK
TXZ F,FL%BIG ;ASSUME NOT BIG
CAILE T1,SEGPG ;FILE TOO LARGE?
JRST [ TXO F,FL%BIG ;MARK IT
SETZM BIGSEG ;RECORD START OF SEGMENT
MOVX T1,SEGPG ;DO A SEGMENT OF SEGPG PAGES
JRST .+1] ; AND CONTINUE INLINE
MOVEM T1,FSIZE ;SAVE CURRENT MAPPED FILE SIZE
LOAD T1,FB%BSZ,P1 ;GET THE BYTE SIZE
CAIE T1,7 ;NICE KOSHER ASCII?
JRST [ IMUL P2,T1 ;NO, CONVERT TO BITS
IDIVI P2,7 ;AND BACK TO ASCII
JRST .+1] ;AND CONTINUE
MOVEM P2,FBYTCT ;SAVING BYTE COUNT FOR FILE
HRLZ T1,FILJFN ;JFN,,0
MOVE T2,[.FHSLF,,BUFFER_-PGSFT] ;INTO BUFFER
MOVX T3,PM%CNT+PM%RD+PM%PLD ;TO READ, AND SET PRELOAD BIT
HRR T3,FSIZE ;NUMBER OF PAGES TO MAP
PMAP ;MAP THEM
ERJMP [LERROR <Cannot map input file>]
RETSKP ;RETURN WITH NEXT FILE
SUBTTL MORE ROUTINE TO MAP NEXT FILE SEGMENT
;MORE - ROUTINE TO MAP THE NEXT SEGMENT OF A FILE WITH FL%BIG SET
;AND ADJUST THE POINTERS TO ACCOMMODATE CHANGES IN CORE ADDRESS.
;LAST PAGE OF BUFFER IS MOVED TO BE THE FIRST. THIS MAKES THE
;BOLD ASSUMPTION THAT A MATCH STRING IS NOT LONGER THAN A PAGE....
;AND THAT THE LAST LINE STARTS ON THE LAST PAGE, AND THAT MATCH
;LINES DON'T CROSS THE SEGMENT BOUNDARY (THE LAST BEING WRONG).
;DOES ALL THE MESSY FIXUPS ON ALL THE VARIABLES IT KNOWS ABOUT.
MORE: SETOM T1 ;-1 TO UNMAP
MOVE T2,[.FHSLF,,BUFFER_-PGSFT] ;THE PAGES IN THE BUFFER
HRRZ T3,FSIZE ;GET THE COUNT
TXO T3,PM%CNT ;COUNT BIT
PMAP ;MAP THEM AWAY
ERJMP [WARN <Trouble with file - > ;LEADIN AND
TYPJFN FILJFN,FULL ;LET HIM KNOW WHICH ONE
LERROR <Cannot unmap file pages>] ;THEN DIE
MOVEI T1,SEGPG-1 ;SHIFT DOWN BY N-1 PAGES
ADDM T1,BIGSEG ;NEW START PAGE ADDRESS FOR SEGMENT
MOVE T1,TFSIZE ;GET TOTAL PAGE COUNT
SUB T1,BIGSEG ;MINUS LAST START
CAILE T1,SEGPG ;STILL TOO BIG?
JRST [ MOVEI T1,SEGPG ;SIZE IS STILL SEGPG
JRST MORE0] ;AND CONTINUE
TXZ F,FL%BIG ;LAST SEGMENT, DON'T COME HERE AGAIN
MORE0: MOVEM T1,FSIZE ;STORE APPROPRIATE SIZE VALUE
MOVE T1,BIGSEG ;GET STARTING SEGMENT NUMBER
HRL T1,FILJFN ;GET THE SOURCE JFN
MOVE T2,[.FHSLF,,BUFFER_-PGSFT] ;GET DESTINATION POINTER
MOVE T3,FSIZE ;GET THE NUMBER OF PAGES TO MAP
TXO T3,PM%CNT+PM%RD+PM%PLD ;READ N PAGES WITH PRELOADING
PMAP ;MAP NEXT SEGMENT
ERJMP [LERROR <Unable to map next file segment>]
;NOW ADJUST POINTERS...
MOVX T1,-<SEGWD-PGSIZ> ;USE ADDRESS OFFSET TO
ADDM T1,LINPTR ;UPDATE POINTER TO LAST LINE
ADD P1,[SEGBY-<PGSIZ*5>] ;UPDATE BYTE COUNTER IN P1 FOR ADDED PAGES
SUBI P2,<SEGWD-PGSIZ> ;UPDATE POINTER IN P2
DMOVE P4,[ EXP 5 ;AND SET UP ONE WORD DESTINATION CROCK
POINT 7,DSTBUF]
MOVE T1,[<SEGBY-<PGSIZ*5>>] ;CALCULATE BYTE OFFSET FOR P1 THAT SCAN
ADDM T1,SCNSVP ; SAVES AND UPDATE IT
RET ;RETURN SUCCESSFULLY FOR MORE FILE
SUBTTL STSINT STATUS INTERRUPT ROUTINE
;STSINT - ROUTINE TO HANDLE A STATUS INTERRUPT ON CONTROL-A
;TO TYPE OUT THE NAME OF THE FILE CURRENTLY BEING PROCESSED.
STSINT: MOVEM P,PIACS+P ;SAVE THE ACS
MOVE P,[0,,PIACS] ; WITH A BLT
BLT P,PIACS+16 ; TO THE SAVE BLOCK
MOVE P,PIACS+P ;REGET A STACK TO USE
PUSH P,.JBUUO## ;PUSH UUO LOC SO WE ARE INTERRUPTABLE
MOVEI T1,.PRIOU ;WAIT FOR A CHANCE TO
DOBE ;GET INTO THE OUTPUT
TYPE <Working on > ;LEADIN TO FILENAME
TYPJFN FILJFN ;TYPE OUT THE FILESPEC WE ARE USING
TYPE <, > ;DELIMIT
TDEC MATCHC ;GIVE MATCH COUNT
TYPE < match> ;MORE TEXT
MOVE T1,MATCHC ;GET COUNT
CAIE T1,1 ;THE SINGULAR CASE?
TYPE <es> ;DO PLURALS NICELY
TYPE <
> ;FINISH WITH A CRLF
POP P,.JBUUO## ;POP UUO LOCATION
MOVE P,[PIACS,,0] ;SETUP BLT AND
BLT P,P ; RESTORE THE ACS
DEBRK ;THEN RETURN FROM INTERRUPT
ERJMP LOSE ;FAILED...
SUBTTL SKPINT - SKIP FILE INTERRUPT ROUTINE
;SKPINT - ROUTINE TO HANDLE A SKIP REST OF THIS FILE INTERRUPT ON ^X
;DEBRKS TO SKPABT WITH INTERRUPT CHARACTER DISABLED IF NOT IN CRITICAL
;REGION BASED ON FL%NOX.
SKPINT: PUSH P,T1 ;SAVE AN AC TO USE
MOVEI T1,SKPABT ;WHERE TO DEBRK TO
TXNN F,FL%NOX ;IN CRITICAL REGION?
MOVEM T1,@LEVTAB ;NO, CHANGE WHERE WE RETURN
MOVX T1,.TICCX ;CONTROL-X CODE
TXNN F,FL%NOX ;DO WE DISABLE IT TO AVOID MULTIPLE?
DTI ;YES
ERJMP LOSE
POP P,T1 ;RESTORE THE AC
DEBRK ;THEN RETURN FROM INTERRUPT
ERJMP LOSE ;FAILED...
SUBTTL THE DATA AREA
XLIST ;DUMP THE LITERALS
DSLITS: LIT
LIST
PIACS: BLOCK 20 ;SAVED ACS DURING STATUS PSI
SAVEP: BLOCK 1 ;STORAGE OF STACK POINTER FOR COMMANDS
SAVEPX: BLOCK 1 ;STORAGE OF STACK FOR CONTROL-X
FILJFN: BLOCK 1 ;WORD USUALLY HOLDING FILE JFN
FDBBLK: BLOCK .FBADR+1 ;SPACE FOR FDB DATA
FILSTP: BLOCK 1 ;POINTER INTO FILLST USED BY NXTFIL
FILCNT: BLOCK 1 ;COUNT OF FILES IN FILLST
FILLST: BLOCK MAXFIL*STRSIZ*5 ;LIST OF JFNS TO SEARCH
TFSIZE: BLOCK 1 ;TOTAL SIZE OF FILE IN PAGES
FSIZE: BLOCK 1 ;SIZE OF FILE IN PAGES FOR MAPPING
BIGSEG: BLOCK 1 ;STARTING PAGE OF CURRENT SEGMENT
FBYTCT: BLOCK 1 ;BYTE COUNT FOR ENTIRE FILE
STRCNT: BLOCK 1 ;COUNT OF ENTRIES IN USE IN STRBUF
STRBUF: BLOCK <MAXSTR+1>*STRSIZ ;SEARCH STRINGS BUFFER
MATCHC: BLOCK 1 ;COUNT OF MATCHES SO FAR (FOR ^A)
MATCHF: BLOCK 1 ;COUNT OF FILES WITH MATCHES
FSKIP: BLOCK 1 ;NUMBER OF FILES SKIPPED OR ABORTED
LINENO: BLOCK 1 ;CURRENT LINE NUMBER
LINPTR: BLOCK 1 ;BYTE POINTER TO BEGINNING OF LAST LINE
DSTBUF: BLOCK 1 ;CROCK DESTINATION FOR MOVST
STRSV2: BLOCK 2 ;AC STORAGE FOR MORE ADJUSTMENT
SCNSVP: BLOCK 1 ;STORAGE OF P1 WHILE CALLING STRCMP
;XTBL IS THE TRANSLATION TABLE FOR THE MOVST INSTRUCTION.
;THERE ARE TWO TYPES OF ENTRIES: FOR ALL CHARATERS TO
;BE IGNORED ON THE SCAN, THE TRANSLATION ENTRY IS THE
;CODE FOR THE CHARACTER, WITH AN OPCODE OF ZERO; AND FOR
;THOSE WE WANT TO BREAK ON, THE ENTRY IS THE CHARACTER
;CODE WITH AN OPCODE FIELD OF ONE TO TERMINATE TRANSLATION.
DEFINE MAKTBL,<
XLIST
...ZZZ==0
REPEAT ^D64,<
...XXX==<...ZZZ>B17+<...ZZZ+1>
IFE <...ZZZ-.CHLFD>,<...XXX==<...ZZZ+100000>B17+<...ZZZ+1>>
EXP ...XXX ;;GENERATE THE WORD
...ZZZ==...ZZZ+2 ;;BUMP THE COUNT
> ;;END OF REPEAT
LIST
> ;END OF MAKTBL DEFINITION
CTBL: MAKTBL ;BUILD THE CONSTANT TABLE TO START WITH, LF SET
XTBL: BLOCK ^D64 ;TRANSLATION TABLE FOR MOVST
END <3,,EVEC>