Trailing-Edge
-
PDP-10 Archives
-
BB-H348C-RM_1982
-
swskit-v21/table.con
There is 1 other file named table.con in the archive. Click here to see a list.
PS:<SWSKIT-V21>
COVER.MEM
Cover letter
TABLE.CON
Table of Contents
PS:<SWSKIT-V21.CERTIFICATION>
This directory contains the control and data files for NFT/FAL
certification tests, as well as the NFT/FAL certificatoin reports
and other documention. It includes:
*.CTL
Control files for testing DECnet20's NFT against remote FAL's,
one for each remote DECnet type.
*.ASC, *.BIN, *.MCY
Sample data files for testing
*.CMD
Sample files for remote file submission testing.
CERT-REPORT-V21.MEM
Certification results of DECnet20 V2 NFT/FAL testing
CERTIFICATION.MEM
Requirements for DECnet20 V2 NFT/FAL certification
CERTIFICATION.NOTES
Documentation of undocumented NFT features (A, TRACE, poor
man's routing, and debugging mode)
DOIT
MIC-like utility to handle control files
MAKIMG
Use this program to make NFT style /IMAGE/Fixed or /IMAGE/Variable
image mode files. Use a cross assembler to make Macy11 format files.
There is no easy tools to make /macy11/fix or /macy11/var files.
NFT-FAL-ASCII-CERTIFICATION-V2.MEM
Report of NFT/FAL ASCII file transfer under DECnet20 V2.0, lots
of information on what did and didn't work to remote systems.
NFT-FAL-DEFAULTS.MEM
List of NFT file specification defaults
NFT-FAL-IMAGE-V2.MEM
Report of NFT/FAL image-mode file transfer (unsupported) under
DECnet20 V2.0. Lots of information on what what switches to
use and what did and didn't work.
NFT-SWITCH.MEM
General file formats used by nft20 and the coresponding switches.
PROG1
Sample TOPS20 .EXE file and source for testing
PS:<SWSKIT-V21.DEBUGGING-TOOLS>
This directory contains the debugging tools for DECNet20 V2
and consists of the following:
DMMACY
Dump MACY11 format files as octal bytes
DMPIMG
Dump 8-bit bytes
DNBOOT
DN20 bootstrap and test program
DNDDT
Modified FEDDT for looking at 32K DN20's, superseded by new DDT11
DNTASK
Tests task building in DN20
DNWAIT
Waits for 2020 DECnet acceptance test server before running DYNETS
DUMPS
Dump symbol values from a STB file
KDPSTS
Provide information about state of KMC/DUP's running DECnet on a 2020
KMCDMP
Task to dump KMC parameters, then crash the MCB, for debugging of
KMC problems
LLDUMP
Dump the monitor's logical link table.
LOOP
2020 loopback port control
MCB-DTR
Object for MCB with built-in DTR task
MCBDA
MCB Dump Analyzer - produces a formated listing of a DN20
system image or dump file. It requires the .MAP and .STB files
generated at the time of the DN20 build. There is a help file.
NETPRO
Network protocol tool for DNA
NIP
Network Information Program - similar to the I DEC command.
NSPFMT
Program to breakdown NSP message into formatted components.
NCU
Program to interface to NICE functionality of DECnet front-end
PS:<SWSKIT-V21.DEBUGGING-TOOLS.DDT11>
DDT11
DDT11 for RSX20F, IBM Comm front-ends, ANF10 front-ends, and
the MCB. It can read a 128K DN20 system image or dump, but
does not handle symbols for DECnet20.
DDTFIL, DDTGP, DDTSIM, DDTSYM
Components of DDT11
PS:<SWSKIT-V21.DEBUGGING-TOOLS.DNSR>
DNREAD
Dump all NSP messages received from the MCB to a file.
DNREAD-DNSEND.MEM
Documentation for DNREAD and DNSEND.
DNSEND
Dump all NSP messages sent to the MCB to a file.
DNSR
Does DNREAD and DNSEND simultaneously
PS:<SWSKIT-V21.DEBUGGING-TOOLS.DTS>
DTR
Active task to test DECnet NSP for general certification.
DTS
Server task for DECnet NSP general certification.
*.CTL, *.CMD
Command files to build and use DTR and DTS
*.MAC, *.REL, *.UNV
Sources, .REL files, and univeral files to build DTR and DTS.
DTS-COMMANDS.TXT
Documentation for using DTR and DTS
PS:<SWSKIT-V21.DEBUGGING-TOOLS.DYNETS>
DYNETS
Performs line loopback testing at NSP level for DECnet installation
certification
*.MAC, *.REL, *.UNV
Source, .REL files, and universal files to build DYNETS
*.CTL, *.CMD
Control files to build and use DYNETS
PS:<SWSKIT-V21.DEMOS>
This directory contains demos using DECnet20, some are
debugged, some are not.
CBLMIR.CBL
Passive task to mirror any message it receives
CBLTST.CBL
Program to perform any DECnet20 interface macro calls on command
DECNET
Sample MACRO subroutines for COBOL and FORTRAN interface to
DECnet, and documentation.
EAT.CBL
Passive task to eat all data sent to it
EKONET
Server task for echoing a file received from a remote node
EKONET-SENDER.MEM
Documentation on EKONET-SENDER task to task demo
FORMIR.FOR
Passive task to mirror all messages sent to it (handles up to
four logical links)
INVENT.CBL
Active task for data processing demo
SENDER
Active task to send a file to a remote node and get it back.
SERVER.CBL
Passive task for data processing demo
SLEEP.MAC
MACRO subroutine to to DISMS
STATUS.FOR
Program to report network info using NICE protocol
TLK
Unsupported program to interface with a TLK/LSN utility on
another system.
VT100.MAC
MACRO subroutine to do limited VT100 graphics
PS:<SWSKIT-V21.DOCUMENTATION>
This directory contains lots of documentation and clues as
to the use of DECnet20 and includes the following:
32K-SYSTEMS.MEM
The problems encountered when building an UNSUPPORTED 32K DECnet
front-end.
BREAKOUT-BOX.MEM
How to use a break-out box when diagnosing network problems.
CATASTROPHE.MEM
Techniques for initially dealing with network problems
COMM.SPD
A list of current supported DEC network products with SPD numbers
CSR-VECTOR-ADDRESS.MEM
Where your KMC's, DUP's, and DMC's have to be for DECnet20 to
work. Pass this on to Field Service at installation time.
DATASCOPE.MEM
How to use a datascope to look at DECnet20
DECNET.BWR
*****************************************************************
*** ***
*** BEWARE file for DECnet20 V2 ***
*** ***
*** READ ME FIRST !!! ***
*** ***
*****************************************************************
DECNET-DATASCOPE.CHART
What the various DECnet messages look like on a DATASCOPE
DECNET-HOTLINE-SPR.MEM
What information you need to gather when contacting Software
Support
DECNET-MONITOR-HINTS.MEM
More problems and debugging hints for the DECnet20 monitor
DECNET-OLD.BWR
DECnet beware file for DECnet20 V2.0.
DNMAC.MEM
Reference manual for PDP11 cross assembler
DTEMPT-NO-CHK11.MEM
How to build a DN20 system image which doesn't run CHK11
EVENT.DOC
Functional specification for Event Logging
FALLOG.DOC
Description of the VAX's FAL logging capability
FALSE-NODE-INIT.MEM
Description of false node initialization betweeen the KL and DN20
FICHE.MEM
A cross-reference of the MCB fiche for NSP and NICE.
INSTALLATION-HINTS.MEM
Problems and pitfalls of installing DECnet20
KDPSRV.DOC
Description of the 2020 KMC/DUP line driver
LEARNING-DECNET.MEM
Suggestion on a course of study for learning DECnet
LOOPBACK-TEST.MEM
Description of DECnet20 loopback functions
MCB-DUMP.DOC
How to look at an unformatted MCB dump.
MCB-GENERATION-FLOWCHART.MEM
List of files involved in generation of DN20 and DN200.
MCB-PATCHING.DOC
The perils of patching the DN20 system image.
MCB-XDT.DOC
How to run a DN20 under XDT, the RSX11S Executive Debugging Tool
MODEM.MEM
Modem strapping for DECnet lines
NETCON.DOC
Description of NETCON and its data structures
NSPSRV-REL4.DOC
Documentation of NSPSRV for TOPS-20 Rel 4.0
SIRUS.MEM
A brief introduction to SIRUS and how to look for existing patches
for a product
SWSKIT.DIR
Directory for SWSKIT for DECnet20 V2.0
SWSKIT-DEF.CMD
A command file to set up logical names for the SWSKIT.
TRAIN.MEM
TOPS10/TOPS20 communications products training plan
USER-PROGRAMMING.MEM
An overview of how to write DECnet applications
PS:<SWSKIT-V21.LISTINGS.LOADER>
Listings of the secondary and tertiary bootstraps.
PS:<SWSKIT-V21.LISTINGS.MCB>
Listing of DECnet20 V2.0 MCB (front-end, DN20) modules. These
are the same modules that appear on the DECnet20 V2.0 fiche and
in the DECnet20 V2.0 SWSKIT. Changes to the MCB for DECnet20
V2 were made at the .OBJ level and are not reflected in the
listings.
PS:<SWSKIT-V21.LISTINGS.MONITOR>
Listings for TOPS-20 Rel 5.0 NSPSRV and TOPS-20 Rel 4.0 for KDPSRV
PS:<SWSKIT-V21.LISTINGS.RSX11S>
Listings of the RSX11S Exec (part of the MCB).
PS:<SWSKIT-V21.LISTINGS.TKB-VNP>
Listings of VNP-20 and TKB-20.
PS:<SWSKIT-V21.LISTINGS.UTILITIES>
Listings for DECnet-20 V21. NETCON components, DECNET20 V21.
NFT and FAL, (DNCONN is for UNSUPPORTED poor man's routing,
and DECnet20 V2.1 SETHOST facility (supported for KL model
B only).
PS:<SWSKIT-V21.NVT>
This directory contains the Unsupported network virtual
terminal programs with sources.
11HOST
RSX11 to -20 network virtual terminal active task
HOST
Unsupported heterogeneous command terminal program - 20 to
VAX, RSTS, RSX11M, IAS, 10, RT
HSDNCN
PMR module for HOST program (similar to DNCONN for NFT/FAL)
NET20.BAS
RSTS active and passive task for network virtaul terminals
NRTSRV
Network virtual terminal server for -20 (superseded by MCBNRT
for Rel. 5.0 KL model B's)
RSTS.MEM
DECnet/E virtual terminal protocol documentation
RVT.MAC
Source for program to run on RSX11M to do network virtual terminal
to a VAX.
VMS.PRO
Command terminal specification for VMS.
PS:<SWSKIT-V21.PMR>
This directory contains unsupported poor man's routing
programs with sources.
PSTHRU
Server for unsupported poorman's routing
PSTHRU.MEM
Documentation for building and running PSTHRU.EXE
PTS.SNO, SNOBOL.EXE, SNOLIB.MAC
Required files for building PSTHRU.EXE
PS:<SWSKIT-V21.VAX-MAIL>
This directory contains unsupported programs to interface
MS to VAXMAIL.
VMAIL
Active task for TOPS20 MS to VAX MAIL transfers
VMAILR
Server for VAX MAIL to TOPS20 MS transfers