Trailing-Edge
-
PDP-10 Archives
-
BB-J724B-SM_1982
-
sources/dnload.mac
There are 24 other files named dnload.mac in the archive. Click here to see a list.
; 4(16) GCO 4.2.1024 - Add START and STOP protocol commands.
;<DN65-DEVELOPMENT>DNLOAD.MAC.11, 31-Jan-80 13:34:48, EDIT BY WEISBACH
; 3(15) Add copyright notice.
; 3(14) Fix a 2020 SYSERR reporting bug.
;<DN65-DEVELOPMENT>DNLOAD.MAC.10, 8-Oct-79 11:20:18, EDIT BY WEISBACH
; 3(13) Allow defaults only on filespec extension.
;<DN65-DEVELOPMENT>DNLOAD.MAC.9, 4-Sep-79 14:45:56, EDIT BY WEISBACH
; 3(12) Add some SYSERR reporting.
; 3(11) Remove defaults from COMND JSYS
;<WEISBACH>DNLOAD.MAC.16, 10-Aug-79 11:41:36, EDIT BY WEISBACH
;<WEISBACH>DNLOAD.MAC.16, 10-Aug-79 11:41:36, EDIT BY WEISBACH
; 3(10) Require that user be wheel or operator
;<WEISBACH>DNLOAD.MAC.11, 23-Jul-79 09:37:44, EDIT BY WEISBACH
; 3(7) Permit .BIC files to be interpreted as .BIN files (for Field Service
; diagnostics).
; 3(6) Fix bug to allow conversing with a diagnostic.
; 3(5) Allow listening over a DZ line for the 2020.
;<DN65-DEVELOPMENT>DNLOAD.MAC.5, 15-May-79 14:44:48, EDIT BY WEISBACH
; 3(4) Fix bug which causes console FE to get dumped instead of
; DN60 FE.
;<WEISBACH>DNLOAD.MAC.9, 2-May-79 13:29:16, EDIT BY WEISBACH
; 3(3) Add command defaults
;<WEISBACH>DNLOAD.NEW.5, 6-Apr-79 16:25:37, EDIT BY WEISBACH
; [3(2)] Add functionality to load and dump over a DTE.
;<WEISBACH>DNLOAD.NEW.4, 6-Apr-79 15:57:53, EDIT BY WEISBACH
; [3(1)] Close loader files when loading complete or error occurs.
;<WEISBACH>DNLOAD.NEW.13, 22-Feb-79 14:05:42, EDIT BY WEISBACH
;Use the provided routine to process End-of-Command
;<WEISBACH>DNLOAD.NEW.19, 5-Feb-79 22:56:09, EDIT BY WEISBACH
;In MAKMLX inserted code to circumvent bug in secondary loader. Loader
;will not accept a Xfer without load address. Added dummy load.
;
;
; COPYRIGHT (c) 1980, 1979
; DIGITAL EQUIPMENT CORPORATION
;
; This software is furnished under a license and may be used
; and copied only in accordance with the terms of such license
; and with the inclusion of the above copyright notice. This
; software or any other copies thereof may not be provided or
; otherwise made available to any other person. No title to
; and ownership of the software is hereby transferred.
;
; The information in this software is subject to change
; without notice and should not be construed as a commitment
; by DIGITAL EQUIPMENT CORPORATION.
;
; DIGITAL assumes no responsibility for the use or reliability
; of its software on equipment which is not supplied by
; DIGITAL.
;
TITLE DNLOAD -- PROGRAM TO LOAD AND DUMP SECONDARY PDP11S
SEARCH MONSYM, MACSYM
.REQUIRE SYS:MACREL
SALL
; ACCUMULATOR DEFINITIONS
T1=1 ;TEMPORARY
T2=2 ;TEMPORARY
T3=3 ;TEMPORARY
T4=4 ;TEMPORARY
Q1=5 ;PRESERVED
Q2=6 ;PRESERVED
Q3=7 ;PRESERVED
P1=10 ;PRESERVED
P2=11 ;PRESERVED
P3=12 ;PRESERVED
P4=13 ;PRESERVED
P5=14 ;PRESERVED
P6=15 ;PRESERVED (CAUTION, USED BY SOME MACROS IN MACSYM)
CX=16 ;RESERVED FOR SUPPORT CODE
P=17 ;PUSH-DOWN POINTER
; VERSION NUMBER DEFINITIONS
VMAJOR==4 ;MAJOR VERSION OF DNLOAD
VMINOR==2 ;MINOR VERSION NUMBER
VEDIT==16 ;EDIT NUMBER
VWHO==0 ;GROUP WHO LAST EDITED PROGRAM (0=DEC DEVELOPMENT)
VDNLOAD== <VWHO>B2+<VMAJOR>B11+<VMINOR>B17+VEDIT
NCHPW==5 ;NUMBER OF ASCII CHARACTERS PER WORD
BUFSIZ==200 ;SIZE OF INPUT TEXT BUFFER
ATMSIZ==BUFSIZ ;SIZE OF ATOM BUFFER FOR COMND JSYS
GJFSIZ==.GJRTY+2 ;SIZE OF GTJFN BLOCK USED BY COMND JSYS
FDBSIZ==.CMDEF+2 ;SIZE OF FUNCTION DESCRIPTOR BLOCK
DCOSIZ==50 ;DIAGNOSTIC COMMAND BUFFER SIZE
TXTSIZ==50 ;TEXTI BLOCK SIZE
PDLEN==50 ;PUSH-DOWN STACK LENGTH
;SYSERR DEFINITIONS
;DEFINITIONS FOR SYSERR BLOCK HEADER
HRC%RB==1 ;EVENT RECORDED BY TOPS20
HRC%FM==1 ;HEADER FORMAT VERSION
HRC%HL==4 ;HEADER LENGTH
HRC%EL==5 ;ENTRY LENGTH EXCLUDING HEADER
;DEFINITIONS FOR DOWN-LINE LOAD FUNCTION
SEC%NL==202 ;EVENT CODE FOR DOWNLINE LOAD
NL%TAR==0 ;POINTER TO ASCIZ NAME OF TARGET NODE
NL%SER==1 ;POINTER TO ASCIZ NMAE OF SERVER NODE
NL%SLD==2 ;POINTER TO ASCIZ NAME OF SERVER LINE DESIGNATOR
NL%FIL==3 ;POINTER TO NAME OF FILE LOADED
NL%RTN==4 ;RETURN CODE
SUBTTL MACRO DEFINITIONS
;MACRO TO DEFINE POINTER TO ASCIZ STRING
DEFINE TXT(TEXT) <POINT 7,[ASCIZ\TEXT\]>
;MACRO TO DEFINE A TABLE ENTRY
DEFINE TB(RTN,TXT)
< [ASCIZ/TXT/] ,, RTN
>
;MACROS TO SET THE DEFAULTS IN COMMAND STRINGS
DEFINE AZPTR(STRING,ARG) <
IFNB <STRING>,<
HRROI T1,[ASCIZ/STRING/]
MOVEM T1,GJFBLK+.GJ'ARG>>
DEFINE DEFFIL(FLAGS,DEVICE,DIRECT,FILNAM,EXTENS) <
CALL CLRGJF ;CLEAR GTJFN BUFFER
MOVX T1,FLAGS ;SET FLAGS
MOVEM T1,GJFBLK+.GJGEN
AZPTR DEVICE,DEV
AZPTR DIRECT,DIR
AZPTR FILNAM,NAM
AZPTR EXTENS,EXT
>
;ERROR MACROS
DEFINE BADCMD(ERRCOD,INSTR)<
IFNB <ERRCOD>,< JRST [MOVEI T1,ERRCOD ;PREFIX STRING TO BE TYPED
HRRO T1,ERRTAB(T1) ;MAKE AS POINTER
CALL TYPATM ;TYPE ERROR MESSAGE
IFNB <INSTR>,< INSTR]> ;EXECUTE INSTRUCTION
IFB <INSTR>,< JRST .+1]> ;JUST RETURN INLINE
>
IFB <ERRCOD>,<
IFB <INSTR>,< JFCL> ;DO NOTHING
IFNB <INSTR>,< INSTR> ;DO THE INSTRUCTION, NO PRINTOUT
>>
DEFINE ERRMSG(ERRCOD,INSTR)<
IFNB <ERRCOD>,< JRST [MOVEI T1,ERRCOD ;PREFIX STRING TO BE TYPED
MOVEM T1,SYERET ;ERROR FOR SYSERR
HRRO T1,ERRTAB(T1) ;MAKE AS POINTER
CALL TYPERR ;TYPE ERROR MESSAGE
IFNB <INSTR>,< INSTR]> ;EXECUTE INSTRUCTION
IFB <INSTR>,< JRST .+1]> ;JUST RETURN INLINE
>
IFB <ERRCOD>,<
IFB <INSTR>,< JFCL> ;DO NOTHING
IFNB <INSTR>,< INSTR> ;DO THE INSTRUCTION, NO PRINTOUT
>>
SUBTTL COMMUNICATIONS PROTOCOL DEFINITIONS
MAXNOD==^D4 ;MAXIMUM NUMBER OF NODES DNLOAD CAN HANDLE
MAXBSZ==1000 ;MAXIMUM MEMORY IMAGE SIZE IN .BIN OR .SYS FILE
MEMSIZ==^D28 ;28 PAGES
BPWRD==4 ;NUMBER OF PDP-11 8-BIT BYTES PER KL20 WORD
BINHDR==6 ;SIZE OF HEADER IN .BIN FILES
BTSIZ==10 ;SIZE OF BOOT JSYS ARGUMENT BLOCK
PRISIZ==1000 ;MAXIMUM SIZE IN BYTES TO PRIMARY (ROM) LOADER
SECSIZ==374 ;MAXIMUM SIZE IN BYTES TO SECONDARY LOADER
TERSIZ==374 ;MAXIMUM SIZE IN BYTES TO TERTIARY LOADER
DMPSIZ==SECSIZ_<-4> ;NEEDS SECSIZ A MULTIPLE OF FOUR
.VNDDC==2 ;PROTOCOL VERSION FOR DDCMP
.BTSLS==24 ;SET LINE SERVICE FUNCTION
.BTLEN==2 ;!!;
.BTRDD==22 ;!!;
.DCPL==1 ;DDCMP LINE
NTRIES==6 ;# TIMES TO RETRY SENDING MOP MSGS
MAXBYT==274 ;MAXIMUM DATA LENGTH OF DDCMP MESSAGES
; MOP LOAD DEVICES AND CORRESPONDING CODES
; ALSO DEVICE CODES FOR NICE PROTOCOL
RADIX 5+5
.DTP11==0 ;DP11
.DTU11==2 ;DU11
.DTL1E==4 ;DL11E
.DTQ11==6 ;DQ11
.DTA11==8 ;DA11A
.DTDUP==10 ;DUP11
.DTDMC==12 ;DMC11
.DTDLV==14 ;DLV11
.DTL1A==16 ;DL11A
.DTDMP==18 ;DMP11 (FORMERLY KL8J)
.DTDTE==16 ;DTE-20 ;NOTE...BUG IN LOADER DTEMPN REQUIRES THIS
.DTDV1==22 ;DV11
.DTKDP==28 ;KMC-DUP
.DTKDZ==30 ;KMC-DZ
; MOP FUNCTION CODES
RADIX 5+5
.MPLDT==0 ;MEMORY LOAD WITH TRANSFER ADDRESS
.MPLOD==2 ;MEMORY LOAD WITHOUT TRANSFER ADDRESS
.MPRQD==4 ;REQUEST MEMORY DUMP (OR EXAMINE DATA)
.MPMOP==6 ;ENTER MOP MODE
.MPRQP==8 ;REQUEST PROGRAM
.MPRQL==10 ;REQUEST MEMORY LOAD (ACK PREVIOUS .MPLOD)
.MPACK==0 ;ACKNOWLEDGE LAST LOAD, REQUEST NEXT
.MPNAK==1 ;ERROR ON PREVIOUS LOAD
.MPMMR==12 ;MOP MODE RUNNING
MP%DMP==2 ;REMOTE SUPPORTS DUMP
.MPMDD==14 ;MEMORY DUMP DATA
.MPDAP==16 ; REMOTE-11 DAP MESSAGE ENVELOPE
.MPASC==18 ; REMOTE-11 ENTER ASCII TELETYPE MODE
.MPREX==20 ;REQUEST TO EXAMINE DATA BY NAME
.MPCLR==22 ;CLEAR DATA BY NAME
.MPTST==24 ;LOOPBACK TEST
.MPDAT==26 ;EXAMINED DATA BY NAME
; MOP PROGRAM TYPE DEFINITIONS
.PTSLD==0 ;SECONDARY LOADER
.PTTLD==1 ;TERTIARY LOADER
.PTOPS==2 ;OPERATING SYSTEM (PRIMARY LOAD FILE)
.PTSDM==3 ;SECONDARY DUMP FILE
.PTTDM==4 ;TERTIARY DUMP FILE
RADIX 8
; RECORD BLOCK TABLE ENTRY DEFINITIONS
DEFSTR (RBJFN,RBLOCK+1,17,18) ;JFN OF FILE BEING INPUT
DEFSTR (RBFTYP,RBLOCK+1,35,9) ;FILE TYPE:
.FTLDA==1 ; LDA (ABSOLUTE BINARY) FORMAT
.FTTSK==2 ; TASK-IMAGE FORMAT
.FTDMP==3 ; DUMP FORMAT (BINARY MEMORY IMAGE)
DEFSTR (RBPTYP,RBLOCK+1,26,9) ;PROGRAM TYPE TO BE LOADED
DEFSTR (RBBYT,RBLOCK+2,35,36) ;NUMBER OF NEXT BYTE TO READ (0-3)
DEFSTR (RBPTR,RBLOCK+3,35,36) ;POINTER TO DATA FOR THIS RECORD
DEFSTR (RBOPTR,RBLOCK+4,35,36) ;POINTER SAVE AREA
DEFSTR (RBDAT,RBLOCK+5,35,36) ;CURRENT DATA WORD FROM INPUT FILE
DEFSTR (RBFCT,RBLOCK+6,17,18) ;COUNT OF REMAINING BYTES IN FILE
DEFSTR (RBCNT,RBLOCK+6,35,18) ;NUMBER OF BYTES IN CURRENT RECORD
DEFSTR (RBNAD,RBLOCK+7,35,36) ;BASE ADDRESS OF CURRENT RECORD
DEFSTR (RBCAD,RBLOCK+10,35,36) ;CURRENT BASE ADDRESS
DEFSTR (RBXAD,RBLOCK+11,35,36) ;TRANSFER ADDRESS FOR THIS LOAD
.RBDAT==12 ;OFFSET TO DATA AREA IN RECORD BLOCK
RCTSIZ==12 ;SIZE OF NON-DATA ENTRIES IN THE RECORD TABLE
; TASK-IMAGE FILE LABEL BLOCK DEFINITIONS FOR RSX-11M RELEASE 3
L$BSA== 10 ;BASE ADDRESS OF TASK IMAGE
L$BLDZ==16 ;LOAD SIZE IN 32. WORD BLOCKS
L$BFLG==30 ;FLAGS WORD:
TS$NHD==1B<35-14> ; BIT14- TASK HAS NO HEADER
L$BXFR==350 ;TRANSFER ADDRESS
L$BHRB==356 ;HEADER (OR TASK IMAGE) RELATIVE BLOCK
SECFIL: -1,,[ASCIZ\SYS:SECDMC.SYS\] ;SECONDARY BOOT FOR LOADING DN200'S
-1,,[ASCIZ\SYS:DTEMPN.BIN\] ;SECONDARY BOOT FOR LOADING DTE'S
TERFIL: -1,,[ASCIZ\SYS:TERDMC.SYS\] ;TERIARY FOR DN200'S
Z ;SAME FOR DTE'S
OPSFIL: BLOCK 2 ;SAVE OPERATING SYSTEM FILE JFN HERE
SECDMP: -1,,[ASCIZ\sys:DMPBOT.BIN\] ;SECONDARY BOOT FOR DUMPING DN200'S
Z
SUBTTL COMMAND PARSER AND DISPATCH
START: RESET ;RESET THE UNIVERSE
MOVE P,[IOWD PDLEN,PDL] ;SET UP STACK
MOVEI T1,.FHSLF ;CURRENT FORK HANDLE
RPCAP ;GET PROCESSES PRIV'S
TXNN T3,SC%WHL ;MUST HAVE WHEEL OR
TXNE T3,SC%OPR ;OR OPERATOR PRIV'S ENABLED
JRST STRT0 ;USER HAS RIGHT PRIVILEGES ENABLED
ERRMSG(.ERR50,HALTF) ;GIVE ERROR AND HALT
STRT0: SETZM TAKFLG ;MARK THAT TAKE FILE NOT BEING PROCESSED
HRROI T1,PROMPT ;GET POINTER TO PROMPT STRING
MOVEM T1,CMDBLK+.CMRTY ;PUT RE-TYPE PROMPT POINTER IN STATE BLOCK
HRROI T1,BUFFER ;GET POINTER TO INPUT TEXT BUFFER
MOVEM T1,CMDBLK+.CMPTR ;SAVE POINTER TO COMMAND STRING
MOVEM T1,CMDBLK+.CMBFP ;SAVE POINTER TO START-OF-BUFFER
MOVE T1,[.PRIIN,,.PRIOU] ;GET PRIMARY INPUT,, OUTPUT JFN'S
MOVEM T1,CMDBLK+.CMIOJ ;SAVE PRIMARY JFN'S
MOVEI T1,PARSE1 ;GET RE-PARSE ADDRESS
MOVEM T1,CMDBLK+.CMFLG ;SAVE RE-PARSE ADDRESS
SETZM CMDBLK+.CMINC ;INITIALIZE # OF CHARACTERS AFTER POINTER
MOVEI T1,BUFSIZ*NCHPW ;GET # OF CHARACTERS IN BUFFER AREA
MOVEM T1,CMDBLK+.CMCNT ;SAVE INITIAL # OF FREE CHARACTER POSITIONS
HRROI T1,ATMBFR ;GET POINTER TO ATOM BUFFER
MOVEM T1,CMDBLK+.CMABP ;SAVE POINTER TO LAST ATOM INPUT
MOVEI T1,ATMSIZ*NCHPW ;GET # OF CHARACTERS IN ATOM BUFFER
MOVEM T1,CMDBLK+.CMABC ;SAVE COUNT OF SPACE LEFT IN ATOM BUFFER
PARSE: HRROI T1,PROMPT ;GET POINTER TO PROGRAM'S PROMPT STRING
CALL CMDINI ;OUTPUT THE PROMPT
PARSE1: MOVE P,[IOWD PDLEN,PDL] ;SET UP STACK AGAIN
SETOM T1 ;INDICATE ALL JFN'S SHOULD BE RELEASED
RLJFN ;RELEASE ALL JFN'S
JSERR ;UNEXPECTED ERROR
CALL CLRGJF ;GO CLEAR GTJFN BLOCK
MOVEI T1,GJFBLK ;GET ADDRESS OF GTJFN BLOCK
MOVEM T1,CMDBLK+.CMGJB ;STORE POINTER TO GTJFN BLOCK
MOVEI T1,CMDBLK ;GET POINTER TO COMMAND STATE BLOCK
MOVEI T2,[FLDDB. (.CMKEY,,CMDTAB)] ;GET FUNCTION BLOCK
COMND ;DO INITIAL PARSE, DEFAULT IS LOAD
ERJMP CMDERR ;ERROR, GO CHECK FOR EOF ON TAKE FILE
TXNN T1,CM%NOP ;VALID COMMAND ENTERED ?
JRST PARSE5 ;YES, GO DISPATCH TO PROCESSING ROUTINE
BADCMD(.ERR0) ;ILLEGAL COMMAND
JRST PARSE ;GO TRY TO GET A COMMAND AGAIN
PARSE5: HRRZ T1,(T2) ;GET DISPATCH ADDRESS
CALL (T1) ;PERFORM REQUESTED FUNCTION
JFCL ;ERRORS ALREADY HANDLED
JRST PARSE ;GO PARSE NEXT COMMAND
SUBTTL LOAD/DLOAD COMMANDS
.LOAD: TDZA T1,T1 ;NOTE LOAD RATHER THAN DIAGNOSTIC LOAD
.DLOAD: SETOM T1 ;NOTE DIAGNOSTIC LOAD REQUESTED
MOVEM T1,LDFLG ;SAVE FLAG INDICATING WHETHER LOAD OR DLOAD
HRROI T2,[ASCIZ\DEVICE\]
CALL SKPNOI ;PROMPT FOR DEVICE TO LOAD
BADCMD(.ERR2,RET) ;COMMAND ERROR
MOVEI T1,CMDBLK
MOVEI T2,[FLDDB. (.CMKEY,,LDDVTB,,<DTE>)]
COMND ;PARSE DEVICE TO BE LOADED
ERJMP CMDERR
TXNE T1,CM%NOP ;VALID COMMAND ENTERED?
BADCMD(.ERR1,RET) ;NOT A CORRECT TARGET FOR BOOTING.
HRRZ T1,(T2) ;DISPATCH ADDRESS FOR THIS DEVICE
JRST (T1) ;CALL ROUTINE
SUBTTL START,STOP PROTOCOL COMMANDS
.START: TDZA T1,T1 ;start a protocol
.STOP: SETO T1, ;stop protocol
MOVEM T1,PROFLG
JUMPN T1,.STP
CALL GETPRO ;get the protocol type
RET
.STP: HRROI T2,[ASCIZ\protocol on line/DTE\]
CALL SKPNOI ;prompt for dte number
BADCMD(.ERR2,RET) ;command error
MOVEI T1,CMDBLK ;get address of command state block
MOVEI T2,[FLDDB. (.CMNUM,,^D8)]
COMND ;parse a dte20 number
ERJMP CMDERR ;go test for eof on failure
TXNE T1,CM%NOP ;parsed dte20 number ok ?
BADCMD(.ERR7,RET) ;bad device number
MOVEM T2,LDDEV ;save dte #
CALL ENDCOM ;parse end of command
ERRMSG(.ERR21,RET)
SKIPE PROFLG
JRST STPPRO ;go stop protocol
SETZM LDFLG ;don't let him think a DLOAD was done
JRST STRPRO ;go start protocol
GETPRO: MOVEI T1,CMDBLK ;get the protocol to start
MOVEI T2,[FLDDB. (.CMKEY,,PRVRTB,,<DN60>)] ;default to DN60 protocol
COMND ;parse protocol version
ERJMP CMDERR
TXNE T1,CM%NOP ;valid command entered?
BADCMD(.ERR51,RET) ;loser
HRRZ T1,(T2)
JRST (T1) ;dispatch to protocol name
PRD22: SETOM LDTYP ;DN22 protocol(DDCMP)
RETSKP
PRMCB: MOVEI T1,.VNMCB ;MCB protocol
JRST SETPRO
PRD60: SKIPA T1,[.VND60] ;DN60 protocol
PR20F: MOVEI T1,.VN20F ;RSX20F protocol
SETPRO: MOVEM T1,PTYPE ;set the protocol
RETSKP
SUBTTL LOAD DTE/DMC COMMANDS
LDPDP: SETOM LDTPDP ;**PDP** flag as load of DECnet node
SKIPA ;**PDP** and as flavor of DN22 load
;**PDP**
LDDTE: TDZA T1,T1 ;NOTE THIS LOAD OF A DTE
LDDMC: SETOM T1 ;NOTE THIS IS LOAD OF A DN22
MOVEM T1,LDTYP ;SAVE FOR LATER
HRROI T2,[ASCIZ\ON LINE/DTE\] ;NOISE
CALL SKPNOI
BADCMD(.ERR2,RET)
MOVEI T1,CMDBLK ;GET ADDRESS OF COMMAND STATE BLOCK
MOVEI T2,[FLDDB. (.CMNUM,,^D8)]
COMND ;PARSE A DTE20 NUMBER
ERJMP CMDERR ;GO TEST FOR EOF ON FAILURE
TXNE T1,CM%NOP ;PARSED DTE20 NUMBER OK ?
BADCMD(.ERR7,RET) ;BAD DEVICE NUMBER
MOVEM T2,LDDEV ;SAVE THE DEVICE #
MOVE T1,LDTYP ;GET TYPE OF LOAD DEVICE
CALL CHKLDV ;CHECK THE LOAD DEVICE
BADCMD(.ERR7,RET)
; PARSE FILESPEC TO LOAD
HRROI T2,[ASCIZ/FROM/] ;GET POINTER TO GUIDE WORDS
CALL SKPNOI ;PARSE NOISE WORDS
BADCMD(.ERR2,RET) ;FAILED
DEFFIL GJ%OLD,DSK:,,,BIN ;SET DEFAULTS FOR LOAD COMMAND FILE
MOVEI T1,CMDBLK ;GET ADDRESS OF COMMAND STATE BLOCK
MOVEI T2,[FLDDB. (.CMFIL)]
COMND ;PARSE INPUT FILESPEC
ERJMP CMDERR ;IF FAILED, GO CHECK FOR END OF FILE
TXNE T1,CM%NOP ;FILESPEC PARSED OK ?
BADCMD(.ERR17,RET) ;BAD FILE SPEC.
MOVEM T2,LDFIL ;SAVE JFN TO FILE SPEC
HRROI T1,SYEDAT+12 ;WHERE TO PUT FILE NAME FOR SYSERR
MOVX T3,<FLD(.JSAOF,JS%DEV)>
JFNS
MOVEI T3,"<:" ;INSERT DEVICE/DIRECTORY DELIMITER
IDPB T3,T1 ;DEPOSIT IN NAME STRING
LSH T3,-7 ;POSITION FOR <
IDPB T3,T1 ;DEPOSIT <
MOVX T3,<FLD(.JSAOF,JS%DIR)> ;GET DIRECTORY NAME
JFNS
MOVEI T3,">" ;DIRECTORY/FILE NAME DELIMITER
IDPB T3,T1 ;PUT IN NAME STRING
MOVX T3,<FLD(.JSAOF,JS%NAM)>
JFNS ;GET THE FILE NAME
MOVEI T3,"."
IDPB T3,T1 ;FILE NAME/EXTENSION DELIMITER
MOVX T3,<FLD(.JSAOF,JS%TYP)>
JFNS ;GET THE EXTENSION
MOVEI T3,"."
IDPB T3,T1 ;PUT IN FILE EXTENSION/GENERATION DELIMITER
MOVX T3,<FLD(.JSAOF,JS%GEN)>
JFNS ;GET THE GENERATION NUMBER
HRRZ T3,T1 ;FINAL VALUE OF POINTER
SUBI T3,SYEDAT+12 ;#FULL WORDS IN FILE SPEC.
IMULI T3,5 ;#CHARACTERS IN FULL WORDS
ROT T1,6
ANDI T1,77 ;NUMBER OF BITS INTO WORD
IDIVI T1,7 ;DIVIDE BY BITS PER CHARACTER
SUBI T1,5
SUB T3,T1 ;TOTAL NUMBER OF CHACTERS IN FILE SPEC
MOVNS T3 ;NEED NEGATIVE
HRLM T3,SYFNAM ;STORE IN SYSERR BLOCK
MOVE T1,LDDEV ;LINE NUMBER OF LOAD
ADDI T1,60 ;MAKE ASCII
DPB T1,[POINT 7,SYEDEV+1,13] ;STORE IN SYSERR BLOCK
MOVE P1,LDTYP ;DEVICE BEING LOADED
CALL PRSLSN ;GO PARSE THE LISTENING DEVICE
RET ;ERRORS ALREADY HANDLED
SETZM SYERET ;ZERO RETURN CODE FOR SYSERR
CALL LOADIT ;GO DO THE LOAD
JFCL ;ERROR HANDLING ALREADY DONE
CALL SYERPT ;REPORT TO SYSERR
RET ;RETURN
LOADIT: MOVE T2,LDFIL ;GET THE OPS JFN
MOVEM T2,OPSFIL+1(P1) ;SAVE JFN TO OPERATING SYSTEM FILE.
MOVE T1,SECFIL+1(P1) ;POINTER TO FILE SPEC FOR SECONDARY
CALL OPNIFL ;OPEN THE FILE
ERRMSG(.ERR11,RET) ;OPEN ERROR.
STOR T1,RBJFN ;SAVE JFN OF FILE BEING LOADED
MOVEI T2,.PTSLD ;THIS IS LOAD OF SECONDARY BOOTSTRAP
STOR T2,RBPTYP ;SO OTHERS CAN SEE THIS
MOVEI T2,PRISIZ ;MAXIMUM SIZE OF BINARY IMAGE TO ROM
MOVEM T2,MAXMEM ;STORE FOR READ ROUTINE
CALL RQLOD ;GO DO THE LOADING
ERRMSG(,CALLRET CLSFIL) ;ERROR, CLOSE FILE AND RETURN
CALL CLSFIL ;CLOSE THE SECONDARY BOOT FILE
CALL CHKRQP ;CHECK THE ANSWER FROM SECONDARY BOOT
ERRMSG(.ERR16,RET)
LOAD T1,RBPTYP ;GET PROGRAM TYPE THE SECONDARY WANTS
CAIE T1,.PTTLD ;IS IT THE TERTIARY LOADER?
JRST LODOPS ;NO, GO LOAD THE OPERATING SYSTEM
MOVE T1,TERFIL+1(P1) ;POINTER TO FILE SPEC FOR TERTIARY BOOT
CALL OPNIFL ;OPEN THE FILE
ERRMSG(.ERR27,RET)
STOR T1,RBJFN ;SAVE THE JFN
MOVEI T2,SECSIZ ;MAXIMUM SIZE OF BINARY IMAGE TO SECONDARY
MOVEM T2,MAXMEM ;FOR THE FILE READ ROUTINE
CALL RQLOD
ERRMSG(,CALLRET CLSFIL) ;ALL ERRORS HAVE ALREADY BEEN PROCESSED.
CALL CLSFIL ;CLOSE THE TERTIARY LOADER
LODOPS:
LOAD T1,RBPTYP ;GET PROGRAM TYPE TO BE LOADED
CAIE T1,.PTOPS ;SHOULD WANT THE OPERATING SYSTEM HERE
ERRMSG(.ERR45,RET) ;NOT SO!
MOVE T1,OPSFIL+1(P1) ;GET THE JFN FOR THE OPERATING SYSTEM
CALL OPSOPN ;OPEN IT. JFN EXISTS ALREADY.
ERRMSG(.ERR30,RET)
STOR T1,RBJFN ;SAVE THE JFN
MOVEI T2,TERSIZ ;MAXIMUM SIZE OF BINARY IMAGE TO TERTIARY LDR
MOVEM T2,MAXMEM ;
CALL INIDDC ;INITIALIZE LINE AS DDCMP LINE
ERRMSG(.ERR43,CALLRET CLSFIL) ;SHOULD NEVER HAPPEN
LOAD T1,RBJFN ;GET THE JFN AGAIN
CALL RQLOD
ERRMSG(,CALLRET CLSFIL) ;ERROR, CLOSE FILE AND RETURN
CALL CLSFIL ;CLOSE FILE
; SKIPE LDFLG ;WAS A DLOAD ISSUED?
; JRST DGNCNV ;YES, GO START CONVERSATION WITH DIAGNOSTIC
SKIPE LDTPDP ;**PDP** was a LOAD PDP issued ?
JRST ELDPDP ;**PDP** Yes, reset line then exit.
STRPRO: CALL INIPRO ;START UP THE LINE
ERRMSG(.ERR43,RET) ;FAILED
RETSKP ;LOAD NOW COMPLETE
ELDPDP: CALL LDKMC ;**PDP** Reload KMC11 (There must be
;**PDP** a better way to Init the KMC ...)
;**PDP**
CALL CLRBOT ;**PDP**
MOVEI T2,BTARG ;**PDP**
MOVE T1,LDDEV ;**PDP**
MOVEM T1,.BTDTE(T2) ;**PDP**
.BTNSP=0 ;**PDP**
MOVEI T1,.BTNSP ;**PDP** Set line service to be NSP
MOVEM T1,.BTCOD(T2) ;**PDP**
MOVEI T1,.BTSLS ;**PDP** Set line service function code
BOOT ;**PDP**
ERJMP [ERRMSG(.ERR43,RET)] ;**PDP**
CALL CLRBOT ;**PDP** prepare to start line.. clear arg block
MOVEI T2,BTARG ;**PDP**
MOVE T1,LDDEV ;**PDP** unit to load
MOVEM T1,.BTDTE(T2) ;**PDP** put into arg blk
MOVE T1,.VNDDC ;**PDP** protocol to use - DDCMP
MOVEM T1,.BTPRV(T2) ;**PDP**
MOVEI T1,.BTIPR ;**PDP** init protocol
BOOT ;**PDP**
ERJMP [ERRMSG(.ERR43,RET)] ;**PDP**
SETZM LDTPDP ;**PDP** Else LOAD DN22 & LOAD KMC
;**PDP** will be broken
RETSKP ;**PDP**
;**PDP**
;RQLOD - ROUTINE TO DO THE LOADING OF A SATELLITE COMPUTER.
;
;ACCEPTS IN T1/ JFN OF FILE CONTAINING PROGRAM TO BE BOOTED.
; CALL RQLOD
;
;RETURNS +1 ERROR RETURN,
; +2 SUCCESS, LOAD COMPLETE
RQLOD:
CALL FILTYP ;DETERMINE THE TYPE OF FILE TO LOAD
ERRMSG(.ERR32,RET)
STOR T2,RBFTYP ;STORE FILE TYPE BEING LOADED
MOVEI T1,777777 ;SET UP INITIAL LOAD ADDRESS TO DUMMY
STOR T1,RBCAD ;STORE IT
MOVEI T1,0
MOVEM T1,LDNUM ;START WITH LOAD ZERO.
MOVX T1,BPWRD ;PDP-11 BYTES PER WORD
STOR T1,RBBYT ;TO FORCE A READ IN INPBYT ROUTINE
MOVEI T4,0
STOR T4,RBFCT ;INITIALIZE COUNT
RQLOD0: LOAD T2,RBFTYP ;GET FILE TYPE FOR DISPATCHING
CALL @[R ;ILLEGAL
Z INPLDA ;BIN FORMAT
Z INPTSK ;SYS FORMAT
](T2)
ERRMSG(.ERR34,RET) ;;!!;; be sure to print out filename here
LOAD T2,RBPTYP ;TYPE OF PROGRAM BEING LOADED
CAIN T2,.PTSLD ;SECONDARY LOADER.
CALLRET RQLSB ;YES, SECONDARY IS SPECIAL
LOAD T1,RBCNT ;ANY MORE BYTES TO TRANSFER?
SKIPN T1 ;YES,
CALLRET RQXFER ;NO, GO SEND TRANSFER MESSAGE
MOVEI T1,NTRIES ;NUMBER OF TIMES TO RETRY A LOAD IMAGE
MOVEM T1,LDRTRY ;SAVE FOR CHKMOP ROUTINE
CALL MAKMPL ;MAKE A LOAD-WITHOUT-TRANSFER MOP MSG
ERRMSG(.ERR23,RET)
RQAGN: CALL MOPSND ;SEND OUT THE MOP MSG
ERRMSG(.ERR24,RET)
CALL MOPRCV ;RECEIVE THE ANSWER FROM LOADER
JRST [SKIPG LDRTRY ;RETRY COUNT EXHAUSTED?
ERRMSG(.ERR25,RET) ;YES, RETURN ERROR
SOS LDRTRY ;DECREMENT RETRY COUNT AND TRY AGAIN
JRST RQAGN]
CALL CHKMOP ;CHECK THE VALIDITY OF ANSWER
ERRMSG(.ERR26,RET)
JRST RQLOD0 ;GO TRANSFER SOME MORE
RQXFER:
MOVEI T1,NTRIES ;NUMBER OF ATTEMPTS TO MAKE
MOVEM T1,LDRTRY
CALL MAKMLX ;MAKE A LOAD-WITH-TRANSFER MESSAGE
RET ;ERROR ALREADY ANNOUNCED
RQAGNX: CALL MOPSND ;SEND OUT THE MOP MESSAGE
ERRMSG(.ERR24,RET)
CALL MOPRCV ;GO RECEIVE THE ANSWER
JRST [SKIPG LDRTRY ;RETRY COUNT EXHAUSTED?
ERRMSG(.ERR25,RET) ;YES, RETURN ERROR
SOS LDRTRY ;DECREMENT AND TRY AGAIN
JRST RQAGNX]
LOAD T1,RBPTYP ;GET THE PROGRAM TYPE BEING LOADED
CAIE T1,.PTOPS ;IS IT THE OPERATING SYSTEM?
JRST [CALL CHKRQP ;NO, MAKE SURE LOADER ASKING FOR ANOTHER LOAD
ERRMSG(.ERR26,RET)
RETSKP]
CALL CHKMOP ;CHECK IT TOO
ERRMSG(.ERR26,RET)
RETSKP ;LOAD NOW COMPLETE
;ROUTINE TO LOAD A REMOTE COMPUTER UP THRU SECONDARY BOOTSTRAP.
; TERMINATE ANY PROTOCOL PREVIOUSLY RUNNING
RQLSB: STKVAR <SECCTR,SECPTR>
MOVE T1,LDDEV ;GET DTE20 NUMBER
CALL TRMPRO ;GO TERMINATE THE PROTOCOL
RET ;FAILED
CALL FLUSH ;FLUSH OUT THE LINE
RET ;ERROR
; TRIGGER THE ROM IN THE REMOTE COMPUTER
SKIPN LDTYP ;DON'T TRIGGER ON A DTE
JRST RQLSB0 ;SINCE LOAD SECONDARY FUNCTION WILL DO THIS
MOVEI T1,NTRIES ;NUMBER TIMES TO TRY TO TRIGGER
MOVEM T1,LDRTRY ;AS RETRY COUNT
TRGAGN: CALL CLRBOT ;CLEAR OUT THE BOOT JSYS ARG BLOCK
MOVEI T2,BTARG ;ADDRESS OF BOOT JSYS ARG BLOCK
MOVE T4,LDDEV ;GET THE DEVICE #
MOVEM T4,BTARG+.BTDTE ;PUT INTO ARG BLOCK
MOVEI T1,.BTROM ;SET UP THE FUNCTION CODE
BOOT
ERJMP [SKIPG LDRTRY ;RETRY COUNT EXHAUSTED?
ERRMSG(.ERR14,RET) ;YES, RETURN ERROR
SOS LDRTRY ;DECREMENT COUNT AND
JRST TRGAGN] ;TRY AGAIN
;BUILD IMAGE DATA
RQLSB0: SETZM SECCTR ;BYTE COUNTER
MOVEI T3,XMPMSG ;WHERE IMAGE DATA IS TO GO
LOAD T4,RBCNT ;#BYTES IN IMAGE DATA
RQLSB2: LOAD T1,RBPTR ;POINTER TO IMAGE DATA
MOVEM T1,SECPTR ;SAVE POINTER
RQLSB3: ILDB T1,SECPTR ;GET A BYTE FROM IMAGE DATA
LDB T2,[POINT 2,SECCTR,35] ;INDEX INTO BYTE POINTER TABLE
DPB T1,SLDTAB(T2) ;DEPOSIT BYTE INTO MOPMSG
AOS T1,SECCTR ;INCREMENT INDEX
CAIL T1,1000 ;TOO MANY?
ERRMSG(.ERR36,RET) ;YES, ERROR
TXNN T1,3 ;CROSSED A WORD BOUNDARY?
ADDI T3,1 ;YES, INCREMENT TO NEXT WORD
SOJG T4,RQLSB3 ;DO MORE IF ANY
MOVEM T3,SECPTR ;SAVE T3
LOAD T2,RBFTYP ;FILE TYPE
CALL @[R ;ILLEGAL
Z INPLDA ;BIN
Z INPTSK ;SYS
](T2) ;
ERRMSG(.ERR34,RET)
MOVE T3,SECPTR ;RESTORE T3
LOAD T4,RBCNT ;ANY MORE THERE. NORMALLY NO.
SKIPE T4 ;NONE
JRST RQLSB2 ;GO DO THIS BLOCK TOO
MOVEI T1,NTRIES ;NUMBER OF TIMES TO TRY
MOVEM T1,LDRTRY
; LOAD THE SECONDARY BOOTSTRAP
AGNSB: CALL CLRBOT ;CLEAR OUT THE BOOT JSYS ARG BLOCK
MOVE T4,LDDEV ;GET DTE20 NUMBER
MOVEM T4,BTARG+.BTDTE ;SAVE DTE20 NUMBER IN JSYS ARG BLOCK
MOVEI T4,XMPMSG ;POINTER TO SECONDARY BOOTSTRAP FILE DATA
MOVEM T4,BTARG+.BTSEC ;SAVE SECONDARY BOOTSTRAP DATA ADDRESS
MOVEI T1,.BTLDS ;GET "LOAD SECONDARY" FUNCTION CODE
MOVEI T2,BTARG ;GET ADDRESS OF ARGUMENT BLOCK
BOOT ;LOAD THE SECONDARY BOOTSTRAP
ERJMP [ERRMSG(.ERR13,RET)]
CALL MOPRCV ;GET RESPONSE FROM THE LOADER
JRST [SKIPG LDRTRY ;RETRY COUNT EXHAUSTED?
ERRMSG(.ERR15,RET) ;YES, RETURN ERROR
SOS LDRTRY ;DECREMENT COUNT AND
JRST AGNSB] ;TRY AGAIN
RETSKP
; ..
SUBTTL LOAD KMC CODE
;HERE TO LOAD THE KMC ON A 2020. FILE CONTAINING MICROCODE IS ASSUME
;TO BE IN THE FILE SYS:COMIOP.KMC
LDKMC:
STKVAR <<BTLBLK,14>,<BTLPAG,2>,BTLFIL>
MOVEI T1,0 ;ONLY ALLOW LOADING OF KDP_0
IMULI T1,10 ;CONVERT UNIT # TO OFFSET
ADD T1,[3,,760540] ;THIS IS KMC11 ADDRESS
MOVEM T1,.BTKMC+BTLBLK ;PUT ADDRESS IN ARG BLOCK
SKIPE LDTPDP ;**PDP** is this KMC reload for LOAD PDP11 cmd ?
JRST LDKMCP ;**PDP** Yes, skip command parsing.
MOVEI T1,CMDBLK ;
MOVEI T2,[FLDDB. (.CMCFM)] ;ACCEPT END OF COMMAND ONLY
COMND
ERJMP CMDERR ;ERROR
TXNE T1,CM%NOP
ERRMSG(.ERR2,RET)
LDKMCP: ;**PDP**
HRROI T2,[ASCIZ\SYS:COMIOP.KMC\] ;FILE NAME FOR uCODE.
MOVX T1,GJ%OLD!GJ%SHT ;FILE FOR INPUT USE, SHORT CALL
GTJFN ;GET A JFN FOR INPUT FILE
ERRMSG(.ERR3,RET)
HRRZM T1,BTLFIL ;SAVE JFN
MOVE T2,[070000,,OF%RD] ;7-BIT BYTES, READ ACCESS ONLY
OPENF ;OPEN THE FILE
ERRMSG(.ERR3,RET)
MOVEI T2,DRAMPG ;PAGE FOR DRAM
MOVEM T2,BTLPAG ;SAVE ADR OF FIRST WORD IN PAGE
SETZM (T2) ;CLEAR FIRST WORD IN PAGE
HRLI T1,(T2) ;MAKE BLT POINTER
HRRI T1,1(T2)
BLT T1,777(T2) ;CLEAR THE PAGE
MOVEI T2,CRAMPG ;PAGE FOR CRAM
MOVEM T2,1+BTLPAG ;SAVE ADR OF FIRST WORD IN PAGE
SETZM (T2) ;CLEAR FIRST WORD IN PAGE
HRLI T1,(T2) ;MAKE BLT POINTER
HRRI T1,1(T2)
BLT T1,777(T2) ;CLEAR THE PAGE
SETZM .BTKSA+BTLBLK ;NO STARTING ADDRESS YET
MOVE T1,BTLFIL ;GET FILE JFN
LOAKD1: BIN ;GET NEXT BYTE
ERJMP LOAKD3 ;IN CASE EOF
CAIN T2,"C" ;IS THIS CRAM DATA ?
JRST LDKMC1 ;LOADING THE CRAM
CAIN T2,"D" ;IS THIS DRAM DATA ?
JRST LDKMD1 ;LOADING THE DRAM
CAIE T2,15 ;IS THIS A CARRIAGE RETURN ?
CAIN T2,12 ;OR A LINE FEED ?
JRST LOAKD1 ;YES SO LOOK FOR COMMAND TYPE
CAIN T2,14 ;OR A FORM FEED ?
JRST LOAKD1 ;YES SO LOOK FOR TYPE OF COMMAND
CAIE T2,";" ;IS THIS A COMMENT LINE ?
JRST LOAKMX ;Bad data in load file
LOAKD2: BIN ;GET NEXT CHARACTER
ERJMP LOAKD3
CAIE T2,12 ;IS THIS A LINE FEED ?
CAIN T2,14 ;OR A FORM FEED
JRST LOAKD1 ;YES SO LOOK FOR COMMAND CHARACTER
JRST LOAKD2 ;KEEP FLUSHING LINE
LOAKD3: SETZM .BTKER+BTLBLK ;INITIALIZE FLAGS
MOVE T1,BTLPAG ;GET ADR OF PAGE
HRLI T1,(POINT 16,) ;MAKE INTO BYTE POINTER
MOVEM T1,.BTKCP+BTLBLK
MOVEI T1,2000 ;COUNT FOR CRAM
MOVEM T1,.BTKCC+BTLBLK
MOVE T1,1+BTLPAG ;GET ADR OF PAGE
HRLI T1,(POINT 8,) ;MAKE INTO BYTE POINTER
MOVEM T1,.BTKDP+BTLBLK
MOVEI T1,2000 ;COUNT FOR DRAM
MOVEM T1,.BTKDC+BTLBLK
SETZM .BTKRC+BTLBLK ;NOT LOADING REGISTERS
MOVEI T1,.BTKML ;WANT TO LOAD THE KMC11
MOVEI T2,BTLBLK ;POINT TO BLOCK
BOOT
ERJMP [MOVEI T4,.ERR4 ;JSYS error
JRST LOAKD6 ]
SETZ T4, ;LOAD WON
LOAKD6: MOVE T1,BTLFIL ;GET FILE JFN
RLJFN ;RELEASE THE JFN
ERJMP .+1
SKIPE T1,T4 ;WAS THERE AN ERROR ?
ERRMSG(<(T4)>,RET)
RET
;HERE TO READ CRAM DATA TO LOAD IN KMC11
LDKMC1: MOVE T2,BTLPAG ;GET ADR OF PAGE
HRLI T2,(POINT 16,) ;MAKE POINTER TO AREA
CALL LDKMCX ;GET THE DATA
JRST LOAKMX ;LOST
SKIPE T2 ;WAS THIS A STARTING ADDRESS ?
MOVEM T2,.BTKSA+BTLBLK ;SAVE STARTING ADDRESS
JRST LOAKD1 ;ON TO NEXT LINE
;HERE TO READ DRAM DATA TO LOAD IN KMC11
LDKMD1: MOVE T2,1+BTLPAG ;GET ADR OF PAGE
HRLI T2,(POINT 8,) ;MAKE POINTER TO DATA
CALL LDKMCX ;GET THE DATA
JRST LOAKMX ;LOST
JUMPE T2,LOAKD1 ;ON TO NEXT LINE
LOAKMX: MOVEI T4,.ERR5 ;Bad data in load file
JRST LOAKD6
LDKMCX: ;SAVE THE Q REGISTERS
MOVE Q1,T2 ;SAVE POINTER
BIN ;GET SPACE
ERJMP R ;LOSE ON EOF
SETZ T4, ;ACCUMULATE THE CHECKSUM HERE
CAIN T2,40 ;IS THIS A SPACE ?
CALL LOAKMN ;GET WORD COUNT FROM THE FILE
RET ;LOST
SKIPL Q2,T2 ;SAVE COUNT
CALL LOAKMN ;GET ADDRESS FROM THE FILE
RET ;LOST
SKIPG T3,Q2 ;COPY COUNT
JRST [ MOVEM T2,Q1 ;SAVE STARTING ADDRESS
CALL LOAKMN ;GET THE CHECKSUM
RET ;LOST
MOVE T2,Q1 ;PICK UP STARTING ADDRESS
HRLI T2,(BT%KSA) ;THIS IS A STARTING ADDRESS
JUMPE T4,RSKP ;IF CHECKSUM OK WE WON
RET ]
ADDI T3,T2
CAILE T3,2000 ;IS THIS REASONABLE ?
RET
CAIA
IBP Q1 ;ADVANCE BYTE POINTER
SOJGE T2,.-1 ;LOOP TILL HIT RIGHT BYTE
CALL LOAKMN ;GET NEXT DATA BYTE
RET
IDPB T2,Q1 ;PUT BYTE INTO DATA
SOJG Q2,.-3
CALL LOAKMN ;GET THE CHECKSUM
RET
SETZ T2,
JUMPE T4,RSKP ;IF CHKSUM IS 0 WE WON
RET
;HERE TO GET A NUMBER FROM A LOAD FILE
LOAKMN: JSP CX,SAVQ ;SAVE THE Q REGISTERS
SETZB Q2,Q3 ;BUILD NUMBER HERE
LOAKM2: BIN ;GET
ERJMP R
CAIL T2,75 ;IS THIS ENCODED DATA ?
CAILE T2,174
JRST [ IMULI Q3,6 ;MAKE HOW MUCH TO ROTATE BACK
ROTC Q1,(Q3)
MOVE T2,Q2 ;COPY DATA
ADD T4,Q2 ;INCLUDE IN CHECKSUM
ANDI T4,177777 ;STRIP OVERFLOW
RETSKP ]
ANDI T2,77 ;STRIP EXTRA BITS
ADDI Q2,(T2) ;INCLUDE IN NUMBER
ROTC Q1,-6 ;POSITION OLD BITS
AOJA Q3,LOAKM2 ;GET NEXT CHARACTER
RET
; HERE TO PARSE END OF COMMAND OR LINE SPECIFICATION
PRSLSN:
MOVX T1,<.DVDES+.DVNUL,,-1> ;DESIGNATOR FOR NULL DEVICE
MOVEM T1,LDLIN ;AS DEFAULT
MOVEI T1,CMDBLK ;GET ADDRESS OF COMMAND STATE BLOCK
MOVEI T2,LSTCHN ;GET ADR OF CHAIN OF FDB'S FOR LAST FIELD
COMND ;PARSE NEXT FIELD
ERJMP CMDERR ;GO TEST FOR EOF IF FAILED
TXNE T1,CM%NOP ;PARSED ONE OF THE FIELDS OK ?
ERRMSG(.ERR20,RET)
LOAD T4,CM%FNC,(T3) ;GET FUNCTION ACTUALLY PARSED
CAIN T4,.CMCFM ;END OF COMMAND ?
JRST LOD038 ;YES, GO PROCESS COMMAND AS IS
CAIN T4,.CMNOI ;PARSED NOISE FIELD ?
JRST LOD036 ;YES, GO PARSE KEYWORD OR CONFIRMATION NEXT
MOVEM T2,LDLIN ;SAVE DESIGNATOR OF LINE TO LISTEN ON
CALL ENDCOM ;PARSE END OF COMMAND
ERRMSG(.ERR21,RET)
JRST LOD038 ;DONE, GO PROCESS COMMAND
; HERE TO PARSE REST OF LINE AFTER (LISTENING ON)
LOD036: MOVEI T1,CMDBLK ;GET ADDRESS OF COMMAND STATE BLOCK
MOVEI T2,[FLDDB. (.CMDEV,,,,,[FLDDB. (.CMCFM)])]
COMND ;PARSE KEYWORD OF END OF COMMAND
ERJMP CMDERR ;FAILED, GO TEST FOR EOF
TXNE T1,CM%NOP ;PARSED FIELD OK ?
ERRMSG(.ERR20,RET)
LOAD T4,CM%FNC,(T3) ;GET FUNCTION CODE PARSED
CAIE T4,.CMDEV ;PARSED A DEVICE ?
JRST LOD038 ;NO, PARSED CONFIRMATION. GO PROCESS COMMAND.
MOVEM T2,LDLIN ;SAVE DESIGNATOR
CALL ENDCOM ;PARSE END OF COMMAND
ERRMSG(.ERR21,RET)
; SET UP THE LINE TO LISTEN ON IF DEFAULTED
LOD038: MOVE T1,LDLIN ;GET DESIGNATOR FOR LISTENING LINE
DVCHR ;GET DEVICE CHARACTERISTICS
LOAD T4,DV%TYP,T2 ;GET DEVICE TYPE
CAIE T4,.DVNUL ;NULL IS OK, AS IS
CAIN T4,.DVTTY ; A TERMINAL LINE ?
JRST LOD039 ;YES, GO PROCESS LOAD COMMAND
ERRMSG(.ERR22,RET)
; ..
; ..
; SET UP TO LISTEN ON THE INDICATED TERMINAL LINE
LOD039: MOVE T1,LDLIN ;GET LINE DESIGNATOR
CALL LISTEN ;GO SET UP LOWER FORK
ERRMSG(.ERR46,RET) ;COULD NOT ASSIGN LINE TO LISTEN ON
RETSKP
; HERE TO ENTER INTO A DIALOG WITH THE DIAGNOSTIC
DGNCNV: MOVE T1,LDDEV ;GET DTE20 NUMBER
CALL TRMPRO ;TERMINATE ANY PROTOCOL RUNNING ON THE DTE
ERRMSG(.ERR47)
CNV04: TMSG <[Enter ^E to return to DNLOAD]
> ;OUTPUT ADIVSORY MESSAGE
CIS ;CLEAR THE INTERRUPT SYSTEM
MOVX T1,.FHSLF ;GET OUT FORK HANDLE
MOVE T2,[LEVTAB,,CHNTAB] ;GET TABLE ADDRESSES
SIR ;TELL MONITOR WHERE TABLES ARE
MOVE T1,[.TICCE,,1] ;CHANNEL 1 IS CONTROL/E
ATI ;ATTACH TERMINAL CHARACTER TO CHANNEL
MOVE T1,[1,,[ MOVEI T1,PARSE ;GET ADR OF ROUTINE TO FIELD CONTROL/E
MOVEM T1,RETPC1 ; INTERRUPTS.
MOVEI T1,101 ;GET PRIMARY JFN
RFMOD ;READ JFN MODE WORD
ERJMP JSERR0 ;UNEXPECTED ERROR
MOVEI T4,1 ;ECHOING WANTED AGAIN !
STOR T4,TT%ECO,T2 ; . . .
SFMOD ;SET THE JFN MODE WORD
ERJMP JSERR0 ;UNEXPECTED ERROR
SKIPE T1,PROCES ;A LOWER FORK NOW LISTENING ?
FFORK ;YES, FREEZE IT !
ERCAL R ;IGNORE ERRORS
DEBRK ;DISMISS AND RETURN TO PARSER CODE
ERJMP JSHLT0]] ;UNEXPECTED FAILURE
MOVEM T1,ICH001 ;SAVE LEVEL AND INTERRUPT ROUTINE ADDRESS
MOVX T1,.FHSLF ;GET OUR FORK HANDLE
MOVX T2,1B1 ;CHANNEL 1 BIT
AIC ;ACTIVATE CHANNEL 1
EIR ;ENABLE ENTIRE INTERRUPT SYSTEM
MOVEI T1,101 ;GET PRIMARY JFN
RFMOD ;READ JFN MODE WORD
ERJMP JSERR0 ;UNEXPECTED ERROR
MOVEI T4,0 ;NO ECHOING IS WANTED ON FURTHER CHARACTERS
STOR T4,TT%ECO,T2 ; ENTERED DURING THIS DIALOG
SFMOD ;SET THE JFN MODE WORD
ERJMP JSERR0 ;UNEXPECTED ERROR
TALK10: CALL GETTXT ;GO GET TEXT TO SEND TO DIAGNOSTIC
RET ;FAILED
LDB T2,[POINT 7,DCOMND,6] ;GET CHARACTER
JUMPE T2,TALK10 ;IGNORE NULLS
MOVE T1,LINJFN ;GET JFN TO OUTPUT TO
BOUT ;OUTPUT THE CHARACTER
ERJMP JSERR0 ;FAILED, ISSUE ERROR MESSAGE
JRST TALK10 ;GO GET NEXT COMMAND
SUBTTL CONVERSE (WITH) MCBN:
;
; COMMAND TO BEGIN A CONVERSATION WITH A SECONDARY PDP-11 WITHOUT
; DISTURBING ITS PROGRAM.
;
.CONVR:
MOVX T1,<.DVDES+.DVNUL,,-1> ;GET DESIGNATOR FOR NULL
MOVEM T1,LDLIN
HRROI T2,[ASCIZ/WITH/] ;GET GUIDE PHRASE
CALL SKPNOI ;PARSE NOISE WORDS
RET ;FAILED, RETURN.
MOVEI T1,CMDBLK ;GET ADDRESS OF COMMAND STATE BLOCK
MOVEI T2,[FLDDB. (.CMDEV)]
COMND ;PARSE A DEVICE NAME
ERJMP CMDERR ;GO TEST FOR EOF ON FAILURE
TXNN T1,CM%NOP ;PARSED DEVICE NAME OK?
JRST CNV01 ;YES.
CALL TSTCOL ;NO, ISSUE NEW LINE IF NEEDED
HRROI T1,[ASCIZ/INVALID DEVICE NAME/]
CALLRET TYPATM ;GO TYPE AND RETURN
;
CNV01: LOAD T4,CM%FNC,(T3) ;GET FUNCTION CODE PARSED
CAIE T4,.CMDEV ;PARSED A DEVICE?
JRST CNV02 ;NO, DONT DISTURB ORIGINAL VALUE
MOVEM T2,LDLIN ;YES, SAVE DESIGNATOR
CALL ENDCOM ;PARSE END OF COMMAND
RET ;FAILED
CNV02: MOVE T1,LDLIN ;GET DESIGNATOR FOR CONVERSATION LINE
DVCHR ;GET DEVICE CHARACTERISTICS
LOAD T4,DV%TYP,T2 ;GET DEVICE TYPE
CAIE T4,.DVTTY ;A TERMINAL LINE?
ERRMSG(.ERR22,RET) ;LISTENING DEVICE NOT A TERMINAL
;
CNV03: MOVE T1,LDLIN ;GET LINE DESIGNATOR
CALL LISTEN ;GO SET UP LOWER FORK
ERRMSG(.ERR46,RET) ;
JRST CNV04 ;GO RUN END OF "LOAD" CODE
;
;LISTEN - ROUTINE TO SET UP TO LISTEN ON A TERMINAL LINE
; SET UP A LOWER FORK TO LISTEN TO TERMINAL LINE
LISTEN: ASUBR <LDES> ;LINE DESIGNATOR
SKIPE T1,LINJFN ;WAS ANOTHER LINE BEING LISTENED TO ?
JRST [ CLOSF ;YES, CLOSE THE FILE
JFCL ;IGNORE FAILURE, UNIMPORTANT
JRST .+1] ;CONTINUE WITH MAINLINE CODE
HRRZ T1,LDES ;GET LINE DESIGNATOR
TXO T1,.TTDES ;FORM TERMINAL DESIGNATOR
MOVX T2,.MOSNT ;SEND TO TERMINAL PARAMETER
MOVX T3,.MOSMN ;SEND NO SYSTEM MESSAGES TO THIS TERMINAL
MTOPR ;TELL MONITOR
ERJMP R ;FAILED, RETURN ERROR TO CALLER
MOVX T2,.MOSIG ;SET "IGNORE INPUT" BIT
MOVX T3,1 ;SET TO 1
MTOPR ;TELL MONITOR
ERJMP R ;FAILED, RETURN ERROR TO CALLER
HRROI T1,STRING ;GET POINTER TO TEMPORARY STRING AREA
MOVE T2,LDES ;GET DESIGNATOR OF LINE TO LISTEN ON
DEVST ;CONVERT DESIGNATOR TO STRING
RET ;FAILED, RETURN ERROR
MOVEI T2,":" ;GET DEVICE NAME TERMINATOR
IDPB T2,T1 ;ADD TERMINATING PUNCTUATION TO STRING
MOVEI T2,.CHNUL ;GET TERMINATOR FOR STRING
IDPB T2,T1 ;ADD A NULL TO THE STRING
MOVX T1,GJ%SHT!GJ%OLD ;SHORT CALL, EXISTING FILE
HRROI T2,STRING ;POINTER TO FILENAME
GTJFN ;GET A JFN FOR THE TERMINAL TO LISTEN ON
RET ;FAILED, RETURN ERROR
MOVEM T1,LINJFN ;SAVE FOR INFERIOR FORK
MOVE T2,[70000,,OF%RD!OF%WR] ;READ, WRITE ACCESS, 7 BIT BYTES
OPENF ;OPEN THE FILE
RET ;FAILED, RETURN ERROR
CFIBF ;CLEAR FILE INPUT BUFFER
ERJMP R ;UNEXPECTED FAILURE
MOVX T2,.TTIDL ;GET "IDEAL" TERMINAL TYPE NUMBER
STTYP ;SET TERMINAL TYPE, SO THERE IS NO PADDING
ERJMP R ;RETURN FAILURE ON UNEXPECTED ERROR
; ..
; ..
MOVE T1,LDES ;GET DESIGNATOR OF LINE TO LISTEN ON
DVCHR ;GET DEVICE CHARACTERISTICS
LOAD T4,DV%TYP,T2 ;GET DEVICE TYPE
CAIE T4,.DVNUL ;IS DEVICE DEFAULTED TO NUL: ?
JRST [ DMOVE T2,[525252,,525252
525252,,525252] ;GET CONTROL CHAR OUTPUT CONTROL WORDS
SFCOC ;TURN OFF CONTROL CHAR TRANSLATION
ERJMP R ;RETURN ERROR ON FAILURE
RFMOD ;READ THE JFN MODE WORD
ERJMP R ;RETURN ERROR ON FAILURE
MOVEI T4,-1 ;TURN ON ALL WAKEUP BITS
STOR T4,TT%WAK,T2 ;TURN ON THE BITS IN THE JFN MODE WORD
MOVEI T4,0 ;BUT ECHOING SHOULD BE TURNED
STOR T4,TT%ECO,T2 ; OFF COMPLETELY
SFMOD ;SET THE NEW JFN MODE WORD
ERJMP R ;RETURN FAILURE ON ERROR
JRST .+1 ] ;RETURN TO MAINLINE CODE
SKIPE T1,PROCES ;ANY PREVIOUS FORK ?
JRST [ KFORK ;YES, TRY TO KILL IT
ERJMP .+1 ;IGNORE FAILURE
JRST .+1 ] ;RETURN TO MAINLINE CODE
MOVX T1,CR%MAP!CR%ST ;SAME MAP AS SUPERIOR, START AT ADDRESS IN T2
HRRI T1,TXTTST ;ADDRESS TO START EXECUTION AT
CFORK ;CREATE AN INFERIOR PROCESS
RET ;FAILED, RETURN ERROR
MOVEM T1,PROCES ;SAVE PROCESS HANDLE OF LISTENING PROCESS
RETSKP ;DONE, RETURN SUCCESS
; CODE EXECUTED BY INFERIOR PROCESS TO LISTEN ON A TERMINAL LINE
TXTTST: HRRZ T1,LINJFN ;GET DESIGNATOR TO LISTEN ON
BIN ;INPUT A CHARACTER
JUMPE T2,TXTTST ;SKIP NULLS
MOVE T1,T2 ;COPY THE CHARACTER
PBOUT ;OUTPUT THE CHARACTER
CAIN T2,.CHCRT ;WAS THIS CHARACTER A CARRIAGE-RETURN ?
JRST [ MOVE T1,LINJFN ;YES, GET JFN AGAIN
BIN ;SKIP OVER THE FREE LINE FEED
JRST .+1 ] ;CONTINUE IN MAINLINE CODE
JRST TXTTST ;GO DO NEXT CHARACTER
;TRMPRO - ROUTINE TO TERMINATE THE PROTOCOL RUNNING ON A DTE20
;
;ACCEPTS IN T1/ DTE20 NUMBER
; CALL TRMPRO
;RETURNS: +1 FAILED, ERROR MESSAGE OUTPUT TO TERMINAL
; +2 SUCCESS, PROTOCOL TERMINATED
STPPRO: MOVE T1,LDDEV ;stop protocol on dte
TRMPRO: ASUBR <TPDTE>
CALL CLRBOT ;CLEAR BOOT BLOCK
MOVE T1,TPDTE ;GET BACK DTE #
MOVEM T1,BTARG+.BTDTE ;SAVE DTE20 NUMBER IN JSYS ARG BLOCK
MOVEI T1,.BTTPR ;GET "TERMINATE PROTOCOL" FUNCTION CODE
MOVEI T2,BTARG ;GET ADDRESS OF BOOT JSYS ARGUMENT BLOCK
BOOT ;TERMINATE ANY PROTOCOL PREVIOUSLY RUNNING
ERJMP BTERR ;FAILED, NOTE ERROR
RETSKP ;DONE, RETURN SUCCESS
;
;INIPRO - ROUTINE TO INITIATE PROTOCOL ON A LINE
;
; CALL INIPRO
;RETURNS +1 FAILED
; +2 SUCCEEDED
INIPRO: SKIPE LDFLG ;IF DIAGNOSTIC LOAD, DON'T START PROTOCOLS
RETSKP ;RETURN OKAY THOUGH
SKIPE LDTYP ;DDCMP OR DTE PROTOCOL?
JRST INIDMC ;GO HANDLE DDCMP DIFFERENTLY
CALL CLRBOT ;CLEAR BOOT AREA
MOVE T1,LDDEV ;GET THE DTE #
MOVEI T2,BTARG
MOVEM T1,.BTDTE(T2) ;STORE IN ARG BLOCK
MOVEI T1,.BTBEL ;WAIT FOR DOORBELL
BOOT ;GO WAIT FOR IT
ERJMP R
CALL CLRBOT ;CLEAR
MOVE T1,LDDEV ;DTE #
MOVEM T1,.BTDTE+BTARG ;INTO ARG BLOCK
MOVE T1,PTYPE ;get the protocol version to start
MOVEM T1,BTARG+.BTPRV ;SAVE AS PROTOCOL VERSION
MOVEI T1,.BTIPR ;INITIATE PROTOCOL FUNCTION
MOVEI T2,BTARG ;POINT TO ARG BLOCK FOR JSYS
BOOT ;DO IT
ERJMP R
RETSKP ;SUCCEEDED
;no need to start protocol from this side since dmc will do that. just
;wait for the start exchange to complete
INIDMC: ;HERE TO INITIATE A DN22 DDCMP LINE
MOVEI P1,30 ;NUMBER OF TIMES TO CHECK FOR INIT COMPLETE
INICHK: CALL CLRBOT ;CLEAR BOOT ARG BLOCK
MOVEI T2,BTARG ;
MOVE T1,LDDEV ;UNIT TO LOAD
MOVEM T1,.BTDTE(T2) ;PUT UNIT NUMBER IN JSYS ARG BLOCK
MOVEI T1,.BTRDD ;READ A COMPLETION POST
BOOT
ERJMP R
SKIPN .BTLEN(T2) ;ZERO IMPLIES NO DATA WAS AVAILABLE YET
JRST [SOSGE P1 ;DECREMENT # OF TRIES
ERRMSG(,RET) ;TRIED ENOUGH
MOVEI T1,^D5000 ;WAIT 5 SEC BEFORE TRYING AGAIN
DISMS
JRST INICHK ;TRY AGAIN
]
SKIPL T2,.BTLEN(T2) ;EXPECTING SIGN BIT ON
ERRMSG(,RET)
HRRZS T2 ;ONLY RH
CAIE T2,1 ;IS LINE NOW UP?
ERRMSG(,RET) ;NO
RETSKP
;
;INIDDC - ROUTINE TO INITIALIZE A 2020 SYN LINE AS DDCMP LINE
;
; CALL INIDDC
;
;RETURNS +1 ERROR
; +2 SUCCESS
;
INIDDC:
SKIPN LDTYP ;DON'T DO THIS FOR A DTE
RETSKP
CALL CLRBOT ;CLEAR BOOT JSYS ARG BLOCK
MOVEI T2,BTARG ;ADDRESS OF ARG BLOCK
MOVE T1,LDDEV ;DEVICE BEING INIT'D
MOVEM T1,.BTDTE(T2) ;
MOVEI T1,.DCPL ;DDCMP LINE SERVICE TYPE
MOVEM T1,.BTCOD(T2) ;STORE LINE SERVICE
MOVEI T1,.BTSLS ;SET LINE SERVICE FUNCTION CODE
BOOT
ERJMP R
RETSKP
SUBTTL DUMP COMMAND
.DUMP:
HRROI T2,[ASCIZ\DEVICE\]
CALL SKPNOI ;PROMPT FOR DEVICE TO DUMP
BADCMD(.ERR2,RET)
MOVEI T1,CMDBLK ;ADDRESS OF COMMAND BLOCK
MOVEI T2,[FLDDB. (.CMKEY,,DPDVTB)] ;DEVICES WE CAN DUMP
COMND ;PARSE THE COMMAND
ERJMP CMDERR ;ERROR
TXNE T1,CM%NOP ;CORRECT PARSE?
BADCMD(.ERR1,RET)
HRRZ T1,(T2) ;DISPATCH TO CORRECT ROUTINE
JRST (T1)
DMPDTE: TDZA T1,T1 ;WE'RE DUMPING A DTE
DMP200: SETOM T1 ;WE'RE DUMPING A DN200/DN22
MOVEM T1,LDTYP ;SO WE REMEMBER WHICH
HRROI T2,[ASCIZ\ON LINE/DTE\] ;NOISE WORD
CALL SKPNOI
BADCMD(.ERR2,RET) ;IMPROBABLE
MOVEI T1,CMDBLK ;COMMAND BLOCK
MOVEI T2,[FLDDB. (.CMNUM,,^D8)]
COMND ;GET UNIT NUMBER FIELD
ERJMP CMDERR
TXNE T1,CM%NOP ;UNIT NUMBER CORRECT?
BADCMD(.ERR7,RET) ;NO
MOVEM T2,LDDEV ;SAVE DUMP DEVICE
HRROI T2,[ASCIZ/TO/] ;NOISE WORD
CALL SKPNOI
BADCMD(.ERR2,RET)
DEFFIL GJ%FOU,DSK:,,DUMP0,DMP
MOVEI T1,CMDBLK ;COMMAND BLOCK ADDRESS
MOVEI T2,[FLDDB. (.CMFIL)] ;PARSE OUTPUT FILE SPEC
COMND
ERJMP CMDERR
TXNE T1,CM%NOP ;FILE SPEC CORRECT?
BADCMD(.ERR17,RET) ;NO
MOVEM T2,LDFIL ;SAVE JFN OF FILE PARSED
CALL ENDCOM ;PARSE END OF COMMAND
ERRMSG(.ERR21,RET)
MOVE T1,LDFIL ;JFN TO OPEN
MOVE T2,[440000,,OF%WR] ;8-BIT BYTES AND WRITE ENABLE
OPENF
ERJMP [ERRMSG(.ERR33,RET)]
SKIPN LDTYP ;DOING THE DN200?
JRST DMPDT0 ;GO DO DUMP OF A DTE DIFFERENTLY
MOVE T1,SECDMP ;GET THE DUMPER BOOTSTRAP
CALL OPNIFL ;OPEN THE DUMPER BOOT FILE
ERRMSG (.ERR27,DMPCLS)
STOR T1,RBJFN ;SAVE THE JFN
MOVEI T2,.PTSLD ;THIS IS A SECONDARY BOOTSTRAP
STOR T2,RBPTYP ;SAVE FOR OTHERS TO SEE
MOVEI T2,PRISIZ ;MUST GO AS ONE LOAD IMAGE
MOVEM T2,MAXMEM ;
CALL RQLOD ;LOAD THE BOOTSTRAP
ERRMSG(,DMPERX)
CALL CLSFIL ;CLOSE THE DUMPER FILE
CALL CHKMMR ;CHECK THE "MOP MODE RUNNING" MSG
ERRMSG(.ERR35,DMPCLS)
MOVEI T2,SECSIZ ;SIZE OF BUFFERS TO SEND TO SECONDARY LDR
MOVEM T2,MAXMEM ;FOR I/O ROUTINES
MOVE T1,LDMSIZ ;GET THE TOTAL MEMORY SIZE OF TARGET
STOR T1,RBFCT ;SAVE AS TOTAL FILE SIZE
MOVEI T1,0 ;START DUMPING AT LOCATION 0
STOR T1,RBNAD ;STORE AS NEXT DUMP ADDRESS
DMP030: LOAD T1,RBNAD ;GET THE NEXT ADDRESS TO DUMP
STOR T1,RBCAD ;STORE AS NEW CURRENT ADDRESS TO DUMP
LOAD T1,RBFCT ;GET # BYTES LEFT TO DUMP
MOVE T2,T1
CAMLE T1,MAXMEM ;WILL IT ALL FIT IN BUFFER?
MOVE T1,MAXMEM ;NO, USE THE MAXIMUM
SUB T2,T1 ;UPDATE WHAT'S LEFT
STOR T2,RBFCT ; ...
STOR T1,RBCNT ;NUMBER OF BYTES TO TRANSFER THIS TIME
LOAD T2,RBCAD ;GET CURRENT START ADDRESS FOR DUMP
ADD T2,T1 ;
STOR T2,RBNAD ;UPDATE NEW NEXT ADDRESS
CALL MAKRQD ;MAKE A "REQUEST DUMP DATA" MESSAGE
JFCL ;SHOULD NEVER HAPPEN
MOVEI T1,NTRIES ;NUMBER OF TIMES TO TRY
MOVEM T1,LDRTRY ;...
DMPAGN: CALL MOPSND ;SEND OUT THE MESSAGE
ERRMSG(.ERR37,DMPCLS)
CALL MOPRCV ;GO RECEIVE THE ANSWER
JRST [SKIPG LDRTRY ;TRIED ENUFF?
ERRMSG(.ERR40,DMPCLS) ;NO ANSWER
SOS LDRTRY ;TRY ONCE MORE
JRST DMPAGN]
CALL CHKMDD ;CHECK THE ANSWER
ERRMSG(.ERR41,DMPCLS) ;ANSWER INCORRECT
MOVE P3,[POINT 8,RMPMSG+1,7] ;POINTER TO START OF DMP DATA
MOVEI P1,0 ;BYTE COUNTER
LOAD P2,RBCNT ;TOTAL COUNT OF DUMP DATA
MOVEI T1,RMPMSG ;WHERE TO PUT SHUFFLED DATA
SHUFFL: ILDB T2,P3 ;GET NEXT BYTE FROM MESSAGE
MOVE T3,P1 ;
ANDI T3,3 ;WHICH BYTE IN WORD TO PUT SHUFFLED DATA
DPB T2,DBYTTB(T3) ;PUT IT THRER
CAIN T3,3 ;DONE THIRD BYTE YET?
ADDI T1,1 ;YES,INCREMENT TO NEXT WORD
ADDI P1,1 ;INCREMENT # BYTES SHUFFLED
SOJG P2,SHUFFL ;IF MORE CONTINUE
MOVE T1,LDFIL ;THE DUMP FILE JFN
MOVE T2,[POINT 36,RMPMSG] ;POINTER TO START OF DUMP DATA
LOAD T3,RBCNT ;GET THE NUMBER OF BYTES
ADDI T3,3 ;ROUND TO # OF 36-BIT WORDS
LSH T3,-2
MOVNS T3 ;MAKE -VE FOR SOUT
SOUT
ERJMP [ERRMSG(.ERR42,DMPCLS)]
LOAD T1,RBFCT ;GET THE REMAINING COUNT
SKIPE T1 ;ANYTHING LEFT?
JRST DMP030 ;YES, CONTINUE
CALL DMPCLS
RETSKP
DMPERX: CALL CLSFIL
JRST DMPCLS
SUBTTL DUMP (DTE20) N (TO) FILE-SPEC
;HERE TO DUMP A DTE. THIS IS DONE ENTIRELY BY THE ROM SO THERE IS NO PROTOCOL
;INVOLVED.
DMPDT0:
CALL CLRBOT ;
MOVEI T1,.BTROM ;GET BOOT JSYS FUNCTION CODE
MOVEI T2,BTARG ;GET ADDRESS OF ARG BLOCK (DTE # ALREADY THERE)
MOVE T4,LDDEV ;[3(4)] GET DEVICE TO BE DUMPED
MOVEM T4,BTARG+.BTDTE ;[3(4)] STORE IN BOOT ARG BLOCK
BOOT ;TRIGGER THE BOOTSTRAP ROM
ERJMP BTERR ;FAILED
; LOOP OVER EACH PAGE OF DATA
MOVSI P1,-MEMSIZ ;SET UP TO LOOP OVER EACH PAGE
DMP025: MOVE T4,[POINT 18,RMPMSG] ;GET POINTER TO DATA AREA
MOVEM T4,BTARG+.BTDPT ;STORE POINTER FOR BOOT JSYS
MOVEI T4,1000*2 ;GET NUMBER OF BYTES TO DUMP
MOVEM T4,BTARG+.BTCNT ;STORE COUNT OF FOR BOOT JSYS
MOVEI T1,.BTDMP ;GET DUMP FUNCTION CODE
MOVEI T2,BTARG ;GET ADDRESS OF ARGUMENT BLOCK
BOOT ;GET SOME DUMP DATA
ERJMP [CALL BTERR ;FAILED, TYPE ERROR MESSAGE
JRST DMPCLS]
MOVE T1,LDFIL ;GET DUMP FILE JFN
MOVE T2,[POINT 36,RMPMSG] ;GET POINTER TO DATA TO DUMP
MOVNI T3,1000 ;NUMBER OF WORDS TO DUMP
SOUT ;OUTPUT DATA TO FILE
ERJMP [ERRMSG(.ERR42,DMPCLS)]
AOBJN P1,DMP025 ;GO DO NEXT PAGE OF FILE
; CLOSE THE OUTPUT FILE
DMPCLS: MOVE T1,LDFIL ;GET JFN OF OUTPUT FILE
CLOSF ;CLOSE THE FILE
ERRMSG(.ERR42,RET) ;FAILED, NOTE FAILURE AND CONTINUE
RET ;DONE, RETURN
SUBTTL DUMP KMC
DMPKMC: TRVAR <<BTDBLK,14>,<BTDPAG,2>,BTDFIL>
MOVEI T1,0 ;DUMP ONLY 0
IMULI T1,10
ADD T1,[3,,760540] ;THIS IS KMC11 ADDRESS
MOVEM T1,.BTKMC+BTDBLK ;SAVE ADR OF KMC11
HRROI T2,[ASCIZ/TO/] ;NOISE WORD
CALL SKPNOI
BADCMD(.ERR2,RET)
MOVEI T1,CMDBLK ;COMMAND BLOCK ADDRESS
MOVEI T2,[FLDDB. (.CMFIL)] ;PARSE OUTPU FILE SPEC
COMND
ERJMP CMDERR
TXNE T1,CM%NOP ;FILE SPEC OKAY?
BADCMD(.ERR17,RET) ;NO
MOVEM T2,BTDFIL ;SAVE JFN TO FILE SPEC FOR LATER
CALL ENDCOM ;END OF COMMAND
ERRMSG(.ERR21,RET)
MOVE T1,BTDFIL ;COPY JFN OF FILESPEC
MOVE T2,[070000,,OF%WR] ;7-BIT BYTES, WRITE ACCESS ONLY
OPENF ;OPEN THE FILE
ERJMP [ERRMSG(.ERR33,RET)]
MOVEI T2,CRAMPG ;CRAM PAGE ADDRESS
MOVEM T2,BTDPAG ;SAVE ADR OF FIRST WORD IN PAGE
MOVEI T2,DRAMPG ;ADDRESS OF DRAM PAGE
MOVEM T2,1+BTDPAG ;SAVE ADR OF FIRST WORD IN PAGE
MOVEI T1,20 ;NUMBER OF REGISTERS TO GET
MOVEM T1,.BTKRC+BTDBLK
ADD T2,[POINT 16,400] ;GET 16 BIT BYTES
MOVEM T2,.BTKRP+BTDBLK ;WHERE TO PUT REGISTERS
MOVEI T1,2000 ;NUMBER OF DRAM BYTES TO GET
MOVEM T1,.BTKDC+BTDBLK
MOVE T2,1+BTDPAG ;GET ADR OF PAGE AGAIN
HRLI T2,(POINT 8,) ;8 BIT BYTES FOR DRAM
MOVEM T2,.BTKDP+BTDBLK
MOVEI T1,2000 ;NUMBER OF CRAM LOCATIONS TO GET
MOVEM T1,.BTKCC+BTDBLK ;NUMBER OF CRAM WORDS TO GET
MOVE T2,BTDPAG ;GET ADR OF PAGE
HRLI T2,(POINT 16,) ;16 BIT BYTES FOR CRAM
MOVEM T2,.BTKCP+BTDBLK
MOVEI T1,.BTKMD ;WANT TO DUMP THE KMC11
MOVEI T2,BTDBLK ;POINT TO ARGUMENT BLOCK
BOOT
ERJMP [ERRMSG(.ERR42,RET)]
;..
;..
MOVE T1,BTDFIL
HRROI T2,[ASCIZ \ Register data\]
MOVEI T3,20 ;NUMBER OF REGISTERS WE ASKED FOR
SUB T3,.BTKRC+BTDBLK ;MAKES NUMBER OF REGISTERS WE GOT
MOVE T4,1+BTDPAG ;POINT TO REGISTER DATA
ADD T4,[POINT ^D16,400] ;16 BIT BYTES
CALL DMPLDT ;DUMP THE REGISTERS
HRROI T2,[ASCIZ \ DRAM data\]
MOVEI T3,2000 ;NUMBER OF DRAM WE ASKED FOR
SUB T3,.BTKDC+BTDBLK ;MAKES NUMBER OF DRAM WE GOT
MOVE T4,1+BTDPAG ;POINT TO DRAM DATA
HRLI T4,(POINT 8,) ;8 BIT BYTES
CALL DMPLDT ;DUMP THE DRAM
HRROI T2,[ASCIZ \ CRAM data\]
MOVEI T3,2000 ;NUMBER OF CRAMS WE ASKED FOR
SUB T3,.BTKCC+BTDBLK ;MAKES NUMBER OF CRAMS WE GOT
MOVE T4,BTDPAG ;POINT TO CRAM DATA
HRLI T4,(POINT 16,) ;16 BIT BYTES
CALL DMPLDT ;DUMP THE CRAMS
SETZ T4, ;DUMP WON
HRRZ T1,BTDFIL ;GET DUMP JFN
CLOSF ;CLOSE FILE
JFCL
RET
DMPLDT: MOVEM T3,.BTKRC+BTDBLK ;SAVE COUNT OF DATA
MOVEM T4,.BTKRP+BTDBLK ;SAVE POINTER TO DATA
MOVEM T2,.BTKERR+BTDBLK ;SAVE TYPE OF DATA
HRROI T2,[ASCIZ \Dump of KDP_\]
SETZ T3,
SOUT
MOVE T2,.BTKMC+BTDBLK ;GET KMC11 ADR
SUB T2,[3,,760540] ;MAKE RELATIVE KMC ADR
LSH T2,-3 ;MAKE UNIT NUMBER
MOVEI T3,^D8 ;OCTAL
NOUT
ERJMP .+1
HRROI T2,[ASCIZ \ made on \]
SETZ T3,
SOUT
SETO T2, ;CURRENT DATE AND TIME
SETZ T3, ;FORMAT
ODTIM
MOVE T2,.BTKERR+BTDBLK ;GET TYPE OF DATA
SETZ T3,
SOUT
SETZ T4, ;FIRST ADR TO DUMP
DMPLD2: TRNE T4,7 ;TIME FOR A CR/LF ?
JRST DMPLD4 ;NO
CALL DMPCRL ;PUT OUT A CR/LF
TRNN T4,37 ;TIME FOR AN EXTRA CR/LF
CALL DMPCRL ;PUT OUT A CR/LF
MOVE T2,T4 ;CURRENT LOCATION NUMBER
MOVE T3,[NO%LFL+6B17+10] ;OCTAL
NOUT ;PUT CURRENT LOCATION NUMBER
ERJMP .+1
MOVEI T2,"/"
BOUT
DMPLD4: ILDB T2,.BTKRP+BTDBLK ;GET NEXT PIECE OF DATA
MOVE T3,[NO%LFL+10B17+^D8] ;LEADING FILLER
NOUT ;PRINT DATA
JFCL
SOSLE .BTKRC+BTDBLK ;ANY LEFT ?
AOJA T4,DMPLD2 ;ON TO NEXT LOCATION
CALL .+1 ;ADD CR/LF
CALL DMPCRL ;END WITH A CR/LF
;RET ;ALL DONE
;HERE TO PUT OUT A CR/LF
DMPCRL: HRROI T2,[BYTE (7)15,12,0] ;CR/LF
SETZ T3,
SOUT
RET
; ERROR ROUTINES
BTERR: CALL TSTCOL
TMSG <? DNLOAD: BOOT JSYS FAILED, ERROR IS:
>
CALL PUTERR
TMSG <
>
RET
;GETTXT - ROUTINE TO INPUT TEXT TO SEND TO A DIGANOSTIC PROGRAM
GETTXT: MOVE T1,[TXTBLK,,TXTBLK+1] ;SET UP TO CLEAR TEXTI BLOCK
SETZM TXTBLK ;CLEAR FIRST WORD OF BLOCK
BLT T1,TXTBLK+TXTSIZ-1 ;CLEAR REMAINDER OF BLOCK
MOVEI T1,TXTSIZ ;GET SIZE OF ARG BLOCK
MOVEM T1,TXTBLK+.RDCWB ;STORE IN COUNT WORD FOR BLOCK
MOVEI T1,[ -1
-1
-1
-1 ] ;BREAK ON ALL CHARACTERS
MOVEM T1,TXTBLK+.RDBRK ;SET UP SPECIAL BREAK SET
MOVX T1,RD%BEL!RD%JFN!RD%BBG!RD%RAI ;GET FLAG BITS
MOVEM T1,TXTBLK+.RDFLG ;SAVE FLAGS IN ARG BLOCK
MOVE T1,[.PRIIN,,.PRIOU] ;GET INPUT AND OUTPUT JFN'S
MOVEM T1,TXTBLK+.RDIOJ ;SAVE JFN'S
HRROI T1,DCOMND ;GET POINTER TO DIAGNOSTIC COMMAND
MOVEM T1,TXTBLK+.RDDBP ;SAVE POINTER TO DESTINATION STRING
MOVEI T1,DCOSIZ*NCHPW ;GET # OF CHARACTERS IN DIAG COMMAND BUFFER
MOVEM T1,TXTBLK+.RDDBC ;SAVE SIZE OF BUFFER
HRROI T1,DCOMND ;GET POINTER TO START OF COMMAND BUFFER
MOVEM T1,TXTBLK+.RDBFP ;SAVE POINTER IN JSYS ARG BLOCK
SETZM TXTBLK+.RDRTY ;NO PROMPT POINTER
SETZM TXTBLK+.RDBKL ;NO BACKUP LIMIT NEEDED
MOVEI T1,TXTBLK ;GET POINTER TO TEXTI BLOCK
TEXTI ;INPUT COMMAND TO SEND
ERJMP [CALL TSTCOL ;FAILED, ISSUE NEW LINE IF NEEDED
TMSG <? DNLOAD: TEXTI JSYS failed, internal program error
> RET ] ;RETURN
LDB T1,[POINT 7,DCOMND,6] ;GET THE CHARACTER JUST ENTERED
CAIN T1,.CHCRT ;A CARRIAGE RETURN ?
JRST [ MOVEI T1,.CHNUL ;YES, GET A NULL
DPB T1,[POINT 7,DCOMND,13] ;REPLACE THE LINE FEED WITH A NULL
JRST .+1 ] ;CONTINUE WITH MAINLINE CODE
RETSKP ;DONE, TEXT INPUT. RETURN SUCCESS
SUBTTL RESUME (LISTENING)
.RESUM: HRROI T2,[ASCIZ/LISTENING/]
CALL SKPNOI ;PARSE NOISE WORDS
RET ;FAILED
CALL ENDCOM ;PARSE END OF COMMAND
RET ;FAILED
SKIPN T1,PROCES ;WAS THERE A LOWER FORK ?
JRST NOFORK ;NO, ISSUE MESSAGE
RFORK ;YES, RESUME THE LOWER FORK
ERJMP .+1 ;IGNORE ERRORS
JRST DGNCNV ;GO BACK INTO DIALOG MODE
NOFORK: CALL TSTCOL ;ISSUE NEW LINE IF NEEDED
TMSG <% DNLOAD: No listening in progress...
> ;OUTPUT MESSAGE
RET ;DONE, RETURN
SUBTTL TAKE (COMMANDS FROM) FILE-SPEC (LOGGING OUTPUT ON) FILE-SPEC
.TAKE: HRROI T2,[ASCIZ/COMMANDS FROM/] ;GET NOISE TEXT
CALL SKPNOI ;GO PARSE NOISE FIELD
RET ;FAILED, RETURN FAILURE
CALL CLRGJF ;GO CLEAR GTJFN BLOCK
MOVX T1,GJ%OLD ;GET EXISTING FILE FLAG
MOVEM T1,GJFBLK+.GJGEN ;STORE GTJFN FLAGS
HRROI T1,[ASCIZ/CMD/] ;GET DEFAULT FILE TYPE FIELD
MOVEM T1,GJFBLK+.GJEXT ;STORE DEFAULT EXTENSION
MOVEI T1,CMDBLK ;GET ADDRESS OF COMMAND STATE BLOCK
MOVEI T2,[FLDDB. (.CMFIL)] ;GET FUNCTION DESCRIPTOR BLOCK ADDRESS
COMND ;PARSE INPUT FILE SPEC
erjmp cmderr ;error, go check for eof on take file
TXNN T1,CM%NOP ;PARSED FILE-SPEC OK ?
JRST TAKE10 ;YES, GO ON AND SAVE INPUT JFN
CALL TSTCOL ;ISSUE NEW LINE IF NEEDED
TMSG <? DNLOAD: Invalid file specification, >
CALLRET PUTERR ;OUTPUT ERROR STRING TO TERMINAL
; HERE ON A GOOD INPUT FILE SPEC
TAKE10: MOVEM T2,INJFN ;SAVE INPUT JFN FOR COMMANDS
HRROI T2,[ASCIZ/LOGGING OUTPUT ON/] ;GET NOISE TEXT
CALL SKPNOI ;GO PARSE NOISE FIELD
RET ;FAILED, RETURN FAILURE
CALL CLRGJF ;GO CLEAR GTJFN BLOCK USED BY COMND JSYS
MOVX T1,GJ%FOU ;GET FLAG SAYING FILEIS FOR OUTPUT USE
MOVEM T1,GJFBLK+.GJGEN ;SAVE GTJFN FLAGS
SETZM NAMBUF ;INITIALIZE FILENAME BUFFER
HRROI T1,NAMBUF ;GET POINTER TO WHERE FILENAME IS TO GO
MOVE T2,INJFN ;GET INPUT JFN
MOVX T3,<FLD(.JSAOF,JS%NAM)> ;GET FLAG BITS SAYING OUTPUT NAME ONLY
JFNS ;GET FILE NAME OF INPUT FILE
SKIPE NAMBUF ;ANY FILENAME ?
HRROI T1,NAMBUF ;YES, GET A POINTER TO THE FILE NAME FOR INPUT
MOVEM T1,GJFBLK+.GJNAM ;STORE DEFAULT NAME OF OUTPUT FILE
HRROI T1,[ASCIZ/LOG/] ;GET DEFAULT FILE TYPE OF OUTPUT FILE
MOVEM T1,GJFBLK+.GJEXT ;STORE DEFAULT EXTENSION
MOVEI T1,CMDBLK ;GET ADDRESS OF COMMAND STATE BLOCK
MOVEI T2,[FLDDB. (.CMFIL)] ;GET FILE-SPEC FUNCTION BLOCK ADDRESS
COMND ;PARSE OUTPUT FILE SPEC
erjmp cmderr ;error, go check for eof on take file
TXNN T1,CM%NOP ;FILE SPEC PARSED OK ?
JRST TAKE20 ;YES, GO ON TO SAVE JFN
CALL TSTCOL ;NO, ISSUE NEW LINE IF NEEDED
TMSG <? DNLOAD: Invalid file specification, >
CALLRET PUTERR ;GO OUTPUT CORRECT MESSAGE AND RETURN
; HERE TO SAVE OUTPUT JFN AND GET COMMAND CONFIRMATION
TAKE20: MOVEM T2,OUTJFN ;SAVE LOGGIN FILE JFN
CALL ENDCOM ;GO PARSE COMMAND CONFIRMATION
RET ;RETURN, BAD CONFIRMATION
; OPEN INPUT AND OUTPUT FILES
MOVE T1,INJFN ;GET INPUT JFN
MOVE T2,[7B5+OF%RD] ;7 BIT BYTES, READ ACCESS
OPENF ;OPEN INPUT FILE
JRST [ CALL TSTCOL ;ERROR, ISSUE NEW LINE IF NEEDED
TMSG <? DNLOAD: Cannot OPEN command file, >
CALLRET PUTERR] ;GO ISSUE REST OF MESSAGE AND RETURN
MOVE T1,OUTJFN ;GET OUTPUT JFN
CAIN T1,.PRIOU ;STILL PRIMARY OUTPUT JFN ?
JRST TAKE30 ;NO OUTPUT JFN, GO ON
MOVE T2,[7B5+OF%WR] ;7 BIT BYTES, WRITE ACCESS
OPENF ;OPEN OUTPUT FILE
JRST [ CALL TSTCOL ;ERROR, ISSUE NEW LINE IF NEEDED
MOVE T1,INJFN ;GET INPUT JFN AGAIN
CLOSF ;CLOSE INPUT FILE
JFCL ;IGNORE ERRORS HERE
TMSG <? DNLOAD: cannot OPEN logging file, >
CALLRET PUTERR] ;GO OUTPUT REST OF MESSAGE
; NOW SAVE NEW JFN'S AND RETURN TO PARSER
TAKE30: HRLZ T1,INJFN ;GET INPUT JFN
HRR T1,OUTJFN ;GET OUTPUT JFN
MOVEM T1,CMDBLK+.CMIOJ ;SAVE NEW JFN'S
SETOM TAKFLG ;MARK THAT COMMANDS ARE COMING FROM FILE
RET ;RETURN TO PARSER
SUBTTL HELP AND EXIT COMMANDS
; HELP COMMAND
.HELP: HRROI T2,[ASCIZ/WITH DNLOAD/] ;GET NOISE WORDS
CALL SKPNOI ;GO PARSE NOISE FIELD
RET ;FAILED, RETURN FAILURE
CALL ENDCOM ;GO PARSE END OF COMMAND
RET ;BAD CONFIRMATION, RETURN
HRROI T1,HLPMSG ;GET POINTER TO HELP MESSAGE
PSOUT ;OUTPUT HELP MESSAGE
RET ;GO PARSE NEXT COMMAND
; EXIT COMMAND
.EXIT: HRROI T2,[ASCIZ/TO MONITOR/] ;GET NOISE PHRASE
CALL SKPNOI ;GO PARSE NOISE FIELD
RET ;FAILED, RETURN FAILURE
CALL ENDCOM ;GO PARSE END OF COMMAND
RET ;BAD CONFIRMATION, RETURN
SETOM T1 ;INDICATE ALL FILES SHOULD BE CLOSED
CLOSF ;CLOSE ALL OPEN FILES
JSERR ;UNEXPECTED ERROR
SETOM T1 ;AND RELEASE ALL ASSIGNED
RELD ; DEVICES !
JFCL ;IGNORE FAILURE HERE
HALTF ;RETURN TO MONITOR
JRST START ;IF CONTINUE'D, START OVER
SUBTTL COMMAND ERROR SUBROUTINES
; SUBROUTINE TO TEST COLUMN POSITION AND OUTPUT CRLF IF NEEDED
TSTCOL: MOVEI T1,.PRIOU ;GET PRIMARY OUTPUT DESIGNATOR
RFPOS ;READ FILE POSITION
HRRZ T2,T2 ;KEEP JUST THE COLUMN POSITION
JUMPE T2,R ;IF AT COLUMN 1 DO NOT OUTPUT CRLF
TMSG <
> ;NO, OUTPUT A CRLF
RET ;RETURN TO WHENCE WE CAME ...
; ROUTINE TO OUTPUT THE JSYS MESSAGE ON AN ERROR FROM A GTJFN OR OPENF
;
; CALL: CALL PUTERR
; RETURNS: +1 ALWAYS
PUTERR: MOVX T1,.PRIOU ;GET PRIMARY OUTPUT JFN
HRLOI T2,.FHSLF ;OUR FORK, LAST ERROR CODE
SETZM T3 ;
ERSTR ;OUTPUT ERROR STRING
JFCL ;IGNORE
JFCL ;IGNORE
TMSG <
> ;OUTPUT NEW LINE
RET ;RETURN TO WHENCE WE CAME ...
;ROUTINE TO CHECK THE DEVICE TO BE LOADED
;
;ACCEPTS T1/ LOAD DEVICE TYPE
;
; CALL CHKLDV
;
;RETURNS +1 ERROR
; +2 SUCCESS
CHKLDV:
SKIPE T1 ;IS IT A DTE?
JRST CHK200 ;NO, MUST BE DN200
CAIL T2,0 ;IS DTE # WITHIN
CAILE T2,3 ;THE PROPER LIMITS?
JRST R ;NO
RETSKP
CHK200:
CAIE T2,0 ;ONLY ZERO ALLOWED
CAIN T2,1 ;OR 1
SKIPA
RET ;ERROR
RETSKP
;PUTATM - ROUTINE TO TYPE THE CONTENTS OF THE ATOM BUFFER
;
;ACCEPTS IN T1/ POINTER TO ASCIZ PREFIX STRING TO BE TYPED
; CALL TYPATM
;RETURNS: +1 ALWAYS
TYPATM: STKVAR <ATOMPT>
MOVEM T1,ATOMPT ;SAVE ATOM POINTER
CALL TSTCOL ;ISSUE NEW LINE IF NEEDED
TMSG <? DNLOAD: > ;OUTPUT INITIAL PART OF MESSAGE
MOVE T1,ATOMPT ;RESTORE ATOM POINTER
PSOUT ;OUTPUT THE STRING
TMSG < "> ;OUTPUT PUNCTUATION
HRROI T1,ATMBFR ;GET POINTER TO THE ATOM BUFFER
PSOUT ;OUTPUT THE TEXT ENTERED
TMSG <"
> ;OUTPUT END OF LINE
RET ;RETURN
SUBTTL PARSING SUBROUTINES
; ROUTINE TO PARSE AN END-OF-COMMAND
;
; CALL: CALL ENDCOM
; RETURNS: +1 BAD CONFIRMATION, MESSAGE ALREADY ISSUED
; +2 SUCCESS, COMMAND CONFIRMED
ENDCOM: MOVEI T1,CMDBLK ;GET ADDRESS OF COMMAND STATE BLOCK
MOVEI T2,[FLDDB. (.CMCFM)] ;GET FUNCTION BLOCK FOR CONFIM
COMND ;PARSE CONFIRMATION
erjmp cmderr ;error, go check for eof on take file
TXNE T1,CM%NOP ;VALID END-OF-COMMAND SEEN ?
RET
CALL TAKTST ;OUTPUT COMMAND LINE IF DOING TAKE COMMAND
RETSKP ;SUCCESS, RETURN
; ROUTINE TO PARSE NOISE PHRASE
;
; CALL: T2/ POINTER TO NOISE PHRASE
; CALL SKPNOI
; RETURNS: +1 ERROR, INVALID NOISE PHRASE
; +2 SUCCESS, NOISE PHRASE PARSED OK
SKPNOI: MOVE T1,[NOIFDB,,NOIFDB+1] ;SET UP TO CLEAR FUNCTION DESCRIPTOR BLOCK
SETZM NOIFDB ;CLEAR FIRST WORD OF BLOCK
BLT T1,NOIFDB+FDBSIZ-1 ;CLEAR FUNCTION DESCRIPTOR BLOCK
MOVX T1,.CMNOI ;GET FUNCTION TO PERFORM
STOR T1,CM%FNC,NOIFDB ;STORE FUNCTION CODE IN FDB
MOVEM T2,NOIFDB+.CMDAT ;STORE POINTER TO NOISE PHRASE IN FDB
MOVEI T1,CMDBLK ;GET ADDRESS OF COMMAND STATE BLOCK
MOVEI T2,NOIFDB ;GET ADDRESS OF FUNCTION BLOCK
COMND ;PARSE NOISE WORD
erjmp cmderr ;error, go check for eof on take file
TXNN T1,CM%NOP ;NOISE PHRASE PARSED OK ?
RETSKP ;YES, RETURN SUCCESS
CALL TSTCOL ;ISSUE NEW LINE IF NEEDED
HRROI T1,[ASCIZ/Invalid guide phrase/]
callret typatm ;output the text entered and return
;CMDINI - ROUTINE TO INITIALIZE COMMAND STATE BLOCK AND OUTPUT PROMPT
;
;ACCEPTS IN T1/ POINTER TO ASCIZ PROMPT STRING
; CALL CMDINI
;RETURNS: +1 ALWAYS, WITH THE REPARSE ADDRESS SET TO THE ADDRESS OF THE
; CALL TO CMDINI.
CMDINI: MOVEM T1,CMDBLK+.CMRTY ;SAVE POINTER TO PROMPT STRING IN STATE BLOCK
POP P,SAVRET ;SET UP RETURN ADR FROM CMDINI AND FROM REPARSE
MOVEM P,SAVREP ;SAVE STACK POINTER TO BE RESET ON REPARSE
MOVEI T1,REPARS ;GET ADDRESS OF REPARSE ROUTINE
MOVEM T1,CMDBLK+.CMFLG ;SAVE ADDRESS OF REPARSE ROUTINE IN STATE BLOCK
MOVEI T1,CMDBLK ;GET ADDRESS OF COMMAND STATE BLOCK
MOVEI T2,[FLDDB. (.CMINI)] ;GET FUNCTION DESCRIPTOR BLOCK
COMND ;INITIALIZE COMMAND SCANNER JSYS
ERJMP CMDERR ;ERROR, GO SEE IF END OF "TAKE FILE"
JRST @SAVRET ;RETURN
; HERE TO PROCESS A REPARSE
REPARS: MOVE P,SAVREP ;RESET STACK POINTER
JRST @SAVRET ;RETURN TO CALLER OF CMDINI
;INPLDA - ROUTINE TO INPUT ONE BLOCK FROM A PDP-11 FORMAT .LDA FILE
;
;ACCEPTS IN T1/ ADDRESS OF RECORD BLOCK
; CALL INPLDA
;RETURNS: +1 FAILED, BAD FILE FORMAT, PREMATURE EOF, OR BAD CHECKSUM
; +2 SUCCESS, WITH DATA INPUT INTO RECORD BLOCK
INPLDA: ASUBR <IBKREC,IBKSUM,IBKCTR,IBKCNT>
STKVAR <IBKPTR>
LOAD T2,RBNAD ;GET NEXT LOAD ADDRESS
STOR T2,RBCAD ;STORE AS CURRENT LOAD ADDRESS
LOAD T2,RBFCT ;GET COUNT OF BYTES LEFT IN THIS RECORD
JUMPN T2,IBLK40 ;STILL SOME TO DO IN THIS RECORD
SETZM IBKSUM ;INITIALIZE THE CHECKSUM
HRLI T4,(POINT 8,)
HRRI T4,.RBDAT+RBLOCK ;INITIAL BYTE POINTER
STOR T4,RBPTR ;STORE IT
; SKIP OVER INITIAL ZERO BYTES
IBLK10:
CALL INPBYT ;GO GET A BYTE FROM THE INPUT FILE
RET ;FAILED, RETURN
JUMPE T2,IBLK10 ;SKIP OVER ZERO BYTES
; THE NEXT TWO BYTES SHOULD BE A 1-BYTE FOLLOWED BY A 0-BYTE
ADDM T2,IBKSUM ;ADD BYTE JUST INPUT TO CHECKSUM
CAIE T2,1 ;NEXT BYTE A 1-BYTE ?
RET ;NO, BAD FILE FORMAT
CALL INPBYT ;GO GET THE NEXT BYTE FROM THE INPUT FILE
RET ;FAILED, RETURN
ADDM T2,IBKSUM ;ADD BYTE JUST INPUT TO CHECKSUM
CAIE T2,0 ;JUST READ A 0-BYTE ?
RET ;NO, BAD FILE FORMAT
; INPUT THE BYTE COUNT (2 BYTES)
CALL INPWRD ;GET NEXT WORD FROM FILE
RET ;FAILED, RETURN
ADDM T1,IBKSUM ;UPDATE THE CHECKSUM
MOVEM T2,IBKCNT ;SAVE BYTE COUNT
; ..
; ..
; READ THE LOAD OR TRANSFER ADDRESS (2 BYTES)
CALL INPWRD ;GO GET A WORD FROM THE INPUT FILE
RET ;FAILED, RETURN ERROR
ADDM T1,IBKSUM ;ADD THIS WORD TO THE CHECKSUM
STOR T2,RBCAD ;STORE LOAD ADR IN RECORD TABLE ENTRY
STOR T2,RBXAD ;STORE TRANSFER ADR IN RECORD TABLE ENTRY
; SET UP TO READ THE DATA BYTES FROM THE BLOCK
MOVE T1,IBKCNT ;GET BYTE COUNT
SUBI T1,BINHDR ;ALLOW FOR BYTES IN HEADER
MOVEM T1,IBKCTR ;SAVE NUMBER OF DATA BYTES TO READ
STOR T1,RBFCT ;SAVE NUMBER OF DATA BYTES IN RECORD TABLE ENTRY
LOAD T1,RBPTR ;GET POINTER TO DESTINATION FOR DATA
MOVEM T1,IBKPTR ;SAVE POINTER TO DESTINATION OF NEXT DATA BYTE
; READ THE DATA BYTES FROM THE BLOCK
IBLK20: SOSGE IBKCTR ;ANOTHER BYTE TO READ ?
JRST IBLK30 ;NO, GO READ AND VERIFY BLOCK CHECKSUM
CALL INPBYT ;GET A BYTE FROM THE FILE
RET ;FAILED, RETURN ERROR
ADDM T2,IBKSUM ;UPDATE THE CHECKSUM
IDPB T2,IBKPTR ;STORE THE BYTE IN THE RECORD BLOCK
JRST IBLK20 ;GO GET THE NEXT BYTE FROM THE FILE
; HERE TO READ AND VERIFY THE CHECKSUM AFTER READING THE DATA BYTES
IBLK30:
CALL INPBYT ;GO GET A BYTE FROM THE FILE
RET ;FAILED, RETURN ERROR
MOVN T1,IBKSUM ;GET -CHECKSUM
LDB T1,[POINT 8,T1,35] ;GET JUST THE LOW ORDER BYTE OF CHECKSUM
CAME T1,T2 ;CHECKSUM VERIFY CORRECLTY ?
RET ;NO, RETURN FAILURE
; HERE WHEN DONE - RETURN TO CALLER
LOAD T2,RBFCT ;GET TOTAL BYTES IN RECORD
IBLK40: MOVE T3,T2 ;GET A COPY OF SAME
CAMLE T2,MAXMEM ;MORE THAN WILL BE ACCEPTED BY LOADER?
MOVE T2,MAXMEM ;YES, GIVE ONLY MAXIMUM
SUB T3,T2 ;REMAINING BYTE COUNT
STOR T3,RBFCT ;REMEMBER THIS
STOR T2,RBCNT ;NUMBER OF BYTES TO GIVE THIS TIME
LOAD T3,RBCAD ;CURRENT LOAD ADDRESS
ADD T3,T2
STOR T3,RBNAD ;NEW NEXT LOAD ADDRESS
RETSKP ;RETURN SUCCESS
; INPTSK/INPDMP - INPUT A BLOCK FROM A TASK-IMAGE OR DUMP FORMAT FILE
;
; ACCEPTS IN:
; T1/ RECORD BLOCK ADDRESS
;
; RETURNS:
; +1: FAILED, I/O ERROR, INVALID FORMAT OR PREMATURE EOF
; +2: SUCCESS, DATA LOADED INTO RECORD BLOCK
;
INPDMP:
INPTSK:
TRVAR <ITSREC,ITSCNT,ITSPTR>
HRLI T4,(POINT 8,)
HRRI T4,.RBDAT+RBLOCK ;INITIAL BYTE POINTER
STOR T4,RBPTR ;STORE IT
;
; SEE IF WE HAVE READ LABEL BLOCKS ALREADY
; SET NEW ADDRESS FOR THIS BLOCK
;
LOAD T2,RBCAD ;GET CURRENT ADDRESS
CAME T2,[EXP -1] ;HAS ADDRESS
CAIL T2,777777 ; BEEN SET YET?
SKIPA ;NO-- READ LABEL BLOCKS
JRST ITSCBC ;YES-- JUST MOVE DATA FROM FILE
;
; SET UP BYTE COUNTS, READING LABEL BLOCKS IF NEEDED
CALL INPCNT ;GO SET UP COUNTS
RET ;FAILED
;
; COMPUTE BYTE COUNT FOR THIS RECORD
;
ITSCBC: LOAD T2,RBNAD ;MAKE THE NEXT ADDRESS
STOR T2,RBCAD ;THE CURRENT LOAD ADDRESS
LOAD T2,RBFCT ;GET REMAINING BYTE COUNT IN FILE
MOVE T3,T2 ;COPY BYTE COUNT
CAMLE T2,MAXMEM ;MORE THAN MAX ALLOWED IN MEMORY MESSAGES?
MOVE T2,MAXMEM ;YES-- USE MAXIMUM
SUB T3,T2 ;COMPUTE REMAINING BYTE COUNT
STOR T3,RBFCT ;STORE UPDATED COUNT
MOVEM T2,ITSCNT ;REMEMBER THE COUNT
STOR T2,RBCNT ; ALSO FOR EVERYBODY ELSE
LOAD T3,RBNAD ;GET OLD NEXT LOAD ADDRESS
ADD T2,T3 ;ADD THE BYTE COUNT OF THIS LOAD
STOR T2,RBNAD ;REMEMBER AS NEW NEXT LOAD ADDRESS
;
; READ BYTES INTO RECORD
;
LOAD T2,RBPTR ;GET POINTER TO DATA REGION
MOVEM T2,ITSPTR ;SAVE THAT
;
; LOOP THROUGH THE BYTES . . .
;
ITSBLP: SOSGE ITSCNT ;COUNT DOWN, WE DONE?
RETSKP ;YES-- RETURN +2 FROM INPTSK
CALL INPBYT ;GET NEXT FILE BYTE
RET ;ERROR OR EOF-- RETURN NOW
IDPB T2,ITSPTR ;STORE BYTE
JRST ITSBLP ;LOOP FOR ALL BYTES
; INPCNT - SET UP COUNTS AND READ LABEL BLOCKS IF NEEDED
;
; ACCEPTS IN:
;
; RETURNS:
; +1 ERROR
; +2 SUCCESS, WITH RBFCT, RBSAD, RBNAD SET UP
;
INPCNT:
LOAD T2,RBFTYP ;GET FILE TYPE (.FTXXX)
CAIL T2,0 ;RANGE CHECK THE FILE
CAIL T2,FTYPLN ; TYPE CODE
RET ;FAIL, INVALID FILE TYPE
CALLRET @FLTYPE(T2) ;DISPATCH TO ROUTINE TO SET UP COUNTS
FLTYPE: RET ; 0 IS ILLEGAL
RET ; .FTLDA - SHOULD NOT BE HERE FOR LDA FILES
INPTCT ; .FTTSK - TASK-IMAGE FILE TYPE
INPDCT ; .FTDMP - DUMP FORMAT FILE TYPE
FTYPLN==.-FLTYPE ;SIZE OF TYPE DISPATCH TABLE
; INPTCT - INPUT COUNTS FOR A TASK-IMAGE FILE TYPE
;
; ACCEPTS:
;
; RETURNS:
; +1 FAILED
; +2 SUCCESS, WITH COUNTS SET UP IN RECORD BLOCK
INPTCT:
;
; READ LABEL BLOCKS
;
; SETS UP RBFCT, RBXAD, AND RBNAD
;
MOVEI T2,L$BSA-0 ;SKIP TO L$BSA
CALL ITSSKP ; . .
RET ;ERROR OR END-OF-FILE
;
CALL INPWRD ;GET BASE ADDRESS: L$BSA
RET ;ERROR/EOF
STOR T2,RBNAD ;STORE BASE ADDRESS
;
MOVEI T2,L$BLDZ-<L$BSA+2> ;SKIP TO L$BLDZ
CALL ITSSKP ; . .
RET ;ERROR/EOF
;
CALL INPWRD ;GET LOAD SIZE / 64.: L$BLSZ
RET ;ERROR/EOF
LSH T2,^D6 ;CONVERT LOAD SIZE TO BYTES
STOR T2,RBFCT ;STORE LOAD SIZE AS BYTES LEFT IN FILE
;
MOVEI T2,L$BFLG-<L$BLDZ+2> ;SKIP TO L$BFLG
CALL ITSSKP ; . .
RET ;ERROR/EOF
;
CALL INPWRD ;GET FLAGS WORD: L$BFLG
RET ;ERROR/EOF
TXNN T2,TS$NHD ;TASK FILE HAVE NO HEADER: TS$NHD= 1?
RET ;NO-- NOT SYSTEM IMAGE
;
MOVEI T2,L$BXFR-<L$BFLG+2> ;SKIP TO L$BXFR
CALL ITSSKP ; . .
RET ;ERROR/EOF
;
CALL INPWRD ;GET TRANSFER ADDRESS: L$BXFR
RET ;ERROR/EOF
STOR T2,RBXAD ;STORE TRANSFER ADDRESS
;
MOVEI T2,L$BHRB-<L$BXFR+2> ;SKIP TO L$BHRB
CALL ITSSKP ; . .
RET ;ERROR/EOF
;
CALL INPWRD ;GET RELATIVE BLOCK OF IMAGE: L$BHRB
RET ;ERROR/EOF
LSH T2,^D9 ;CONVERT TO BYTES (512. BYTES/BLOCK)
SUBI T2,L$BHRB+2 ;MINUS BYTES ALREADY READ
CALL ITSSKP ;SKIP REMAINING LABEL BLOCKS
RET ;ERROR/EOF
RETSKP ;DONE, RETURN SUCCESS
; INPDCT - ROUTINE TO SET UP THE COUNT FOR A DUMP FORMAT FILE
;
; ACCEPTS:
;
; RETURNS:
; +1 FAILED
; +2 SUCCESS, WITH COUNTS SET UP
INPDCT:
SETZRO <RBNAD,RBXAD> ;INITIALIZE COUNTS
LOAD T1,RBJFN ;GET JFN OF INPUT FILE
MOVX T2,<2,,.FBBYV> ;TWO WORDS, BYTE SIZE WORD & FILE SIZE
MOVX T3,T2 ;PUT RESULTS INTO T2 AND T3
GTFDB ;GET FILE DATA
ERJMP R ;FAILED
LOAD T2,FB%BSZ,T2 ;GET FILE BYTE SIZE
MOVX T1,^D36 ;GET # OF BITS PER WORD
IDIV T1,T2 ;COMPUTE NUMBER OF BYTES PER WORD IN FILE
ADDI T3,-1(T1) ;FILE SIZE + BYTES/WORD -1
IDIV T3,T1 ;ROUND FILES SIZE
IMULI T3,BPWRD ;COMPUTE NUMBER OF KL20 WORDS
STOR T3,RBFCT ;STORE COUNT
RETSKP ;DONE, RETURN
; ITSSKP -- SKIP SOME BYTES IN T2
;
; ACCEPTS IN:
; T2/ COUNT OF BYTES TO SKIP
;
; RETURNS:
; +1: ERROR/EOF
; +2: SUCCESS, T1 POINTS TO RECORD BLOCK
;
ITSSKP:
MOVEM T2,ITSCNT ;SAVE COUNT
ITSSLP:
SOSGE ITSCNT ;BYTES LEFT?
RETSKP ;NO-- RETURN +2 FROM ITSSKP
CALL INPBYT ;GET A BYTE
RET ;ERROR/EOF
JRST ITSSLP ;SKIP MORE....
SUBTTL I/O Subroutines
;INPBYT - ROUTINE TO INPUT THE NEXT BYTE FROM A PDP-11 FORMAT FILE
;
;ACCEPTS IN T1/ ADDRESS OF RECORD TABLE ENTRY
; CALL INPBYT
;RETURNS: +1 ERROR OR END OF FILE
; +2 SUCCESS, WITH BYTE IN T2
INPBYT:
LOAD T3,RBBYT ;GET NUMBER OF NEXT BYTE IN WORD
CAIGE T3,BPWRD ;ALREADY GOT LAST BYTE IN WORD ?
JRST GTBT10 ;NO, GO GET NEX T BYTE IN WORD
; ALL BYTES IN CURRENT WORD HAVE BEEN READ. INPUT THE NEXT DATA WORD
SETZRO RBBYT ;WRAP AROUND TO FIRST BYTE IN WORD
LOAD T1,RBJFN ;GET JFN OF CURRENT INPUT FILE
BIN ;INPUT THE NEXT WORD
ERJMP R ;FAILED, RETURN ERROR
STOR T2,RBDAT ;STORE NEXT DATA WORD FROM INPUT FILE
; HERE TO ACTUALLY GET THE NEXT BYTE OF DATA
GTBT10: LOAD T1,RBDAT ;GET CURRENT DATA WORD
LOAD T3,RBBYT ;GET NUMBER OF NEXT BYTE TO LOAD
LDB T2,BYTTAB(T3) ;LOAD NEXT BYTE FROM CURRENT WORD
INCR RBBYT ;POINT TO NEXT BYTE IN WORD
RETSKP ;RETURN WITH BYTE IN T2
; INPWRD -- INPUT A 16-BIT WORD AS TWO 8-BIT BYTES
;
; ACCEPTS IN T1/ ADDRESS OF RECORD BLOCK FOR THIS OPERATION
;
; RETURNS:
; +1: I/O ERROR OR END-OF-FILE
; +2: SUCCESS,
; T1/ SUM OF BYTES
; T2/ 16-BIT WORD, RIGHT-JUSTIFIED
;
INPWRD:
CALL INPBYT ;READ FIRST (LOW) BYTE
RET ;ERROR-- RETURN +1 FROM INPWRD
PUSH P,T2 ;SAVE LOW BYTE
CALL INPBYT ;READ SECOND (HIGH) BYTE
RET ;ERROR-- RETURN +1 FROM INPWRD
POP P,T3 ;RESTORE LOW BYTE
MOVE T1,T3 ;COPY IT FOR SUM
ADD T1,T2 ;COMPUTE SUM OF BYTES TO T1
LSH T2,^D8 ;SHIFT HIGH BYTE TO BITS 15-8
IOR T2,T3 ;MUSH TOGETHER WITH LOW BYTE INTO WORD IN T2
RETSKP ;RETURN +2 FROM INPWRD, SUM IN T1, WORD IN T2
; TABLE OF BYTE POINTERS TO GET THE "NEXT" BYTE IN PDP-11 FORMAT
BYTTAB: POINT 8,T1,17
POINT 8,T1,9
POINT 8,T1,35
POINT 8,T1,27
DBYTTB: POINT 8,(T1),17
POINT 8,(T1),9
POINT 8,(T1),35
POINT 8,(T1),27
;BYTE POINTER TABLE FOR SECONDARY LOADERS
SLDTAB: POINT 8,(T3),15
POINT 8,(T3),7
POINT 8,(T3),31
POINT 8,(T3),23
;OPNIFL - ROUTINE TO OPEN A FILE FOR INPUT
;
;ACCEPTS IN T1/ POINTER TO ASCIZ FILESPEC
; CALL OPNIFL
;RETURNS: +1 FAILED, GTJFN OR OPENF FAILURE
; +2 SUCCESS, WITH T1/ JFN OF INPUT FILE
;ENTRY OPSOPN IS FOR OPENING THE FILE DESIGNATED IN THE LOAD COMMAND SINCE
;THE COMND JSYS ALREADY GOT A JFN
OPNIFL:
MOVE T2,T1 ;COPY POINTER TO FILESPEC
MOVX T1,GJ%OLD!GJ%SHT ;EXISTING FILE, SHORT CALL
GTJFN ;GET A JFN FOR INPUT FILE
RET ;FAILED, RETURN
OPSOPN: MOVE T2,[440000,,OF%RD] ;36-BIT BYTES, READ ACCESS ONLY
OPENF ;OPEN THE FILE
JRST [ RLJFN ;FAILED, RELEASE THE JFN
JFCL ;IGNORE ERRORS HERE
RET ] ;RETURN ERROR
RETSKP
; FIND THE FILE FORMAT TYPE FROM THE FILE TYPE
FILTYP:
STKVAR <<OPITYP,8>>
HRRZ T2,T1 ;COPY THE JFN FOR JFNS
HRROI T1,OPITYP ;POINT STRING POINTER TO SCRATCH
MOVX T3,<FLD(.JSAOF,JS%TYP)> ;GET ONLY FILE TYPE
JFNS
ERJMP R ;FAILED, RETURN ERROR
MOVEI T1,FTYTAB ;POINT TO FILE TYPE TABLE
HRROI T2,OPITYP ;POINT TO SCRATCH STRING
TBLUK ;FIND FILE TYPE
ERJMP R ;FAILED, RETURN ERROR
MOVE T3,T2 ;COPY FLAGS
HRRZ T2,(T1) ;GET TABLE ENTRY, FILE TYPE FORMAT
TXNN T3,TL%EXM ;EXACT MATCH?
RET ;FAIL IF UNKNOWN FILE TYPE
RETSKP ;SUCCESS, T2/ FILE FORMAT TYPE
; FILE FORMAT TYPE TABLE FOR OPNIFL (TBLUK FORMAT)
FTYTAB:
XWD FTYTBZ,FTYTBZ
TB (.FTLDA,BIC)
TB (.FTLDA,BIN)
TB (.FTTSK,SYS)
FTYTBZ==.-FTYTAB-1
SUBTTL MOP MESSAGE CHECK ROUTINES
;CHKMOP - ROUTINE TO CHECK A MOP "REQUEST LOAD" MESSAGE AND UPDATE THE
; NEXT LOAD NUMBER EXPECTED.
;
; CALL CHKMOP
;RETURNS: +1 FAILED
; +2 RETRY
; +3 SUCCESS
CHKMOP:
MOVE T3,RMPLNG ;GET LENGTH OF RECEIVED MOP MSG
SUBI T3,2 ;AT LEAST FUNCTION AND LOAD # PRESENT ?
SKIPGE T3
JRST R ;ERROR
MOVE T4,[POINT 8,RMPMSG] ;POINTER TO MOP MESSAGE
ILDB T1,T4 ;GET MOP FUNCTION CODE
CAIE T1,.MPRQL ;REQUEST MEMORY LOAD FUNCTION ?
JRST R ;ERROR
ILDB T1,T4 ;YES, GET NEXT LOAD NUMBER REQUESTED
MOVE T2,LDNUM ;GET LOAD NUMBER WE LAST KNEW ABOUT
ADDI T2,1 ;INCREMENT
ANDI T2,377 ;MODULO 256
CAME T2,T1 ;CORRECT LOAD NUMBER REQUESTED ?
JRST R ;ERROR, RETRY MIGHT SUCCEED
MOVEM T2,LDNUM ;STORE UPDATED LOAD NUMBER
SOSGE T3 ;ANOTHER BYTE IN MOP MESSAGE ?
RETSKP ;NO, NO STATUS CODE IS PRESENT, ASSUME SUCCESS
ILDB T1,T4 ;YES, GET THE STATUS CODE FROM THE LOADER
CAIE T1,.MPACK ;SUCCESS ON PREVIOUS LOAD ?
JRST R ;ERROR
RETSKP ;YES, DONE. RETURN SUCCESS.
;CHKRQP - ROUTINE TO CHECK A MOP PROGRAM REQUEST MESSAGE
;
; CALL CHKRQP
;RETURNS: +1 FAILED
; +2 SUCCESS
CHKRQP:
MOVE T3,RMPLNG ;GET # OF BYTES IN THE MOP MESSAGE
SUBI T3,4 ;AT LEAST FUNCTION, DEVICE, PROGRAM & STATION ?
SKIPGE T3
JRST R ;RETURN
; EXTRACT THE FUNCTION CODE, DEVICE TYPE, AND STATION FROM MOP MESSAGE
MOVE T4,[POINT 8,RMPMSG] ;POINTER TO MOP MSG
ILDB T1,T4 ;GET MOP FUNCTION CODE
CAIE T1,.MPRQP ;REQUEST PROGRAM FUNCTION ?
JRST R ;ERROR
ILDB T1,T4 ;GET LOAD DEVICE TYPE (.DTXXX)
MOVE T2,LDTYP ;GET THE LOADING DEVICE TYPE
XCT [CAIE T1,.DTDMC
CAIE T1,.DTDTE]+1(T2)
RET ;WRONG LOAD DEVICE
ILDB T1,T4 ;GET STATION ADDRESS FROM MOP MESSAGE
CAIE T1,1 ;STATION 1 ?
JRST R ;ERROR
ILDB T1,T4 ;YES, GET PROGRAM TYPE FROM MOP MESSAGE
STOR T1,RBPTYP ;STORE THE REQUESTED PROGRAM TYPE
CAIL T1,.PTSLD ;VALID PROGRAM TYPE
CAILE T1,.PTOPS ; IN THE MOP PROGRAM REQUEST MESSAGE ?
JRST R ;ERROR
; ..
; ..
; IGNORE THE SOFTWARE ID FROM THE MOP MESSAGE
RETSKP ;DONE, RETURN SUCCESS
;CHKMMR - ROUTINE TO CHECK THE "MOP MODE RUNNING" MESSAGE
;
; CALL CHKMMR
;RETURNS: +1/ FAILED
; +2/ SUCCESS
;
CHKMMR:
MOVE T3,RMPLNG ;GET LENGTH OF MOP MESSAGE
CAIE T3,^D8 ;BETTER BE EIGHT BYTES
RET ;ITS NOT!!
MOVE T1,[POINT 8,RMPMSG] ;POINTER TO THE MESSAGE
ILDB T4,T1 ;GET THE FUNCTION CODE
CAIE T4,.MPMMR ;MOP MODE RUNNING?
RET ;NO, FAIL
ILDB T4,T1 ;GET DEVICE TYPE
CAIE T4,.DTDMC ;BETTER BE A DMC11
RET ;ITS NOT!
ILDB T4,T1 ;IGNORE THE MOP VERSION
CALL GET4 ;GO GET THE MEMORY SIZE
ILDB T4,T1 ;GET FEATURES BYTE
TXNN T4,MP%DMP ;DUMP SUPPORTED?
RET ;NO
MOVEM T2,LDMSIZ ;STORE TARGETS MEMORY SIZE
RETSKP
;
;CHKMDD - CHECK MEMORY DUMP DATA MESSAGE
;
; CALL CHKMDD
;RETURNS +1/ ERROR
; +2/ SUCCESS, WITH DUMP ADDRESS IN T1
;
CHKMDD:
MOVE T3,RMPLNG ;LENGTH OF MESSAGE
CAIGE T3,5 ;AT LEAST 5 BYTES?
RET ;NO
MOVE T1,[POINT 8,RMPMSG] ;BUILD POINTER TO MOP MESSAGE
ILDB T4,T1 ;GET THE MOP FUNCTION CODE
CAIE T4,.MPMDD ;MEMORY DUMP DATA?
RET ;NO, WRONG
CALL GET4 ;GET THE DUMP ADDRESS
MOVE T1,T2 ;PUT IN T1
RETSKP ;RETURN OKAY
SUBTTL MOP MESSAGE I/O ROUTINES
;MOPSND - ROUTINE TO SEND A MOP MESSAGE
;
; CALL MOPSND
;RETURNS +1 FAILED
; +2 SUCCESS
;
;
MOPSND:
CALL CLRBOT ;GO CLEAR THE BOOT JSYS ARGUMENT BLOCK
MOVEI T2,BTARG ;GET ADDRESS OF BOOT JSYS ARGUMENT BLOCK
MOVE T1,LDDEV ;GET THE DEVICE NUMBER
MOVEM T1,.BTDTE(T2) ;STORE PHYSICAL LINE NUMBER (DTE20 NUMBER)
MOVE T1,[POINT 8,XMPMSG] ;POINTER TO MOP MSG
MOVEM T1,.BTLPT(T2) ;PUT POINTER INTO BOOT JSYS ARGUMENT BLOCK
MOVX T1,BT%BEL ;GET "DOORBELL WANTED" FLAG
MOVEM T1,.BTFLG(T2) ;SAVE FLAGS IN ARGUMENT BLOCK
MOVE T1,XMPLNG ;MESSAGE LENGTH
MOVEM T1,.BTCNT(T2) ;STORE BYTE COUNT IN BOOT JSYS ARGUMENT BLOCK
MOVEI T1,.BTLOD ;GET "LOAD" FUNCTION CODE
BOOT ;SEND THE DATA ACROSS THE DTE20
ERJMP R ;FAILED, RETURN ERROR
RETSKP ;RETURN, DATA SENT
;MOPRCV - ROUTINE TO RECEIVE A MOP MESSAGE
;
;
; CALL MOPRCV
;RETURNS: +1 FAILED
; +2 SUCCESS
;
MOPRCV:
CALL CLRBOT ;GO CLEAR THE BOOT JSYS ARGUMENT BLOCK
MOVEI T2,BTARG ;GET ADDRESS OF BOOT JSYS ARGUMENT BLOCK
MOVE T1,LDDEV ;GET THE DTE/KMC # TO READ
MOVEM T1,.BTDTE(T2) ;STORE NUMBER OF DTE20 TO USE
; SYNCHRONIZE WITH THE BOOTSTRAP PROGRAM BY WAITING FOR A TO-20 DOORBELL
MOVEI T1,.BTBEL ;GET "WAIT FOR DOORBELL" FUNCTION
BOOT ;WAIT TILL BOOTSTRAP STARTS UP
ERJMP R ;FAILED, RETURN ERROR
; THE PROGRAM JUST LOADED IS NOW READY TO SEND BACK A MOP MESSAGE
MOVEI T2,BTARG ;GET ADDRESS OF BOOT JSYS ARGUMENT BLOCK
MOVEI T1,MOPSIZ*4 ;GET MAX NUMBER OF BYTES WE CAN RECEIVE
MOVEM T1,.BTCNT(T2) ;STORE BYTE COUNT
MOVE T1,[POINT 8,RMPMSG] ;STORE POINTER WHERE MSG TO GO
MOVEM T1,.BTDPT(T2) ;STORE POINTER TO WHERE MESSAGE GOES
SETZM .BTFLG(T2) ;CLEAR FLAGS
MOVE T1,LDDEV ;LINE OVER WHICH WE ARE LOADING
MOVEM T1,.BTDTE(T2)
MOVEI T1,.BTRMP ;GET "READ MOP MESSAGE" FUNCTION CODE
BOOT ;GET A MOP MESSAGE
ERJMP R ;FAILED, RETURN ERROR
MOVE T1,.BTCNT+BTARG ;GET NUMBER OF BYTES RECEIVED
MOVEM T1,RMPLNG ;STORE THE LENGTH OF MOP MESSAGE
RETSKP ;DONE, RETURN
SUBTTL ROUTINES TO BUILD MOP MESSAGES
;MAKMPL - ROUTINE TO MAKE A MOP LOAD-WITHOUT-TRANSFER-ADDRESS MESSAGE (.MPLOD)
;
;NO REQUIRED INPUTS
; CALL MAKMPL
;RETURNS: +1 FAILED
; +2 SUCCESS, THE MOP MESSAGE IS ASSEMBLED INTO BUFFER
; MOPMSG WITH THE BYTE COUNT IN MOPLNG.
MAKMPL:
; PUT THE FUNCTION CODE, LOAD NUMBER, AND LOAD ADDRESS INTO THE MESSAGE
CALL CLRMOP ;GO CLEAR THE MOP MESSAGE AREA
MOVE T1,[POINT 8,XMPMSG] ;GET POINTER TO MOP MESSAGE
MOVX T2,.MPLOD ;GET MOP FUNCTION CODE
IDPB T2,T1 ;STORE FUNCTION CODE IN MOP MESSAGE
MOVE T2,LDNUM ;GET THE NEXT LOAD NUMBER TO USE.
IDPB T2,T1 ;STORE LOAD NUMBER IN MOP MESSAGE
LOAD T2,RBCAD ;GET THE LOAD ADDRESS
CALL MAK4 ;GO ADD A FOUR-BYTE NUMBER TO THE MOP MESSAGE
; ADD THE MEMORY IMAGE DATA TO THE MOP MESSAGE
LOAD T2,RBPTR ;GET POINTER TO LOAD RECORD
LOAD T3,RBCNT ;GET NUMBER OF BYTES IN LOAD RECORD
MOVE T4,T3
ADDI T4,6 ;COMPUTE NUMBER OF BYTES IN MOP MSG
MOVEM T4,XMPLNG ;SAVE IT
MOVNS T3 ;GET -NUMBER OF BYTES IN LOAD RECORD
SOUT ;ADD THE LOAD RECORD TO THE MOP MESSAGE
ERJMP R ;SHOULD NOT FAIL
STOR T2,RBPTR ;IN CASE WE HAVE TO RESUME FROM HERE
RETSKP ;RETURN (POINTER IS STILL IN T1)
;MAKMLX - ROUTINE TO ASSEMBLE A MOP "LOAD WITH TRANSFER" MESSAGE
;
;
; CALL MAKMLP
;
;RETURNS: +1 FAILED
; +2 SUCCESS, THE MOP MESSAGE IS ASSEMBLED INTO BUFFER
; MOPMSG WITH THE BYTE COUNT IN MOPLNG.
MAKMLX:
CALL CLRMOP ;CLEAR MOP MESSAGE AREA
MOVE T1,[POINT 8,XMPMSG] ;BUILD POINTER TO MOP MSG.
MOVEI T2,.MPLDT ;GET LOAD-WITH-TRANSFER FUNCTION
IDPB T2,T1 ;DEPOSIT IN MESSAGE
MOVE T2,LDNUM ;GET THE LOAD NUMBER
IDPB T2,T1 ;PUT INTO MOP MESSAGE
;!!;
LOAD T2,RBXAD ;GET THE TRANSFER ADDRESS
SKIPE LDFLG ;ARE WE DOING A DIAGNOSTIC LOAD?
JRST [CAIN T2,1 ;"SPECIAL" STARTING ADDRESS
MOVEI T2,200 ;YES,USE STATDARD DIAGNOSTIC START ADDRESS
CAIN T2,0 ;TRY THIS "SPECIAL" ADDRESS TOO
MOVEI T2,3000 ;YES, USE THIS STARDARD ADDRESS
TXNE T2,1 ;ODD ADDRESS OTHER THAN ONE?
ERRMSG(.ERR30,RET) ;YES, ERROR
JRST .+1] ;GO ON
PUSH P,T2 ;SAVE THE XFER ADDRESS
CALL MAK4 ;PUT XFER ADDRESS IN MESSAGE IN CORRECT FORMAT
POP P,T2 ;DO TWICE SINCE SECONDARY LOADER FOR DN200
CALL MAK4 ;DOESN'T LIKE XFER ADDR W/O LOAD ADDR BY DTE DOES
MOVEI T1,6 ;!!;FOR DTE'S
SKIPE LDTYP ;!!;(LOADER BUG....)
MOVEI T1,12 ;NUMBER OF BYTES IN MESSAGE
MOVEM T1,XMPLNG ;SAVE MESSAGE LENGTH
RETSKP ;DONE
;MAKRQD - ROUTINE TO BUILD A "REQUEST DUMP" MESSAGE
;
; CALL MAKRQD
;RETURNS +1/ NEVER
; +2/ ALWAYS
;
MAKRQD:
MOVE T1,[POINT 8,XMPMSG] ;POINTER TO MOP MESSAGE BUFFER
MOVEI T2,.MPRQD ;MOP REQUEST DUMP FUNCTION CODE
IDPB T2,T1 ;PUT INTO MESSAGE BUFFER
LOAD T2,RBCAD ;CURRENT DUMP ADDRESS
CALL MAK4 ;PUT INTO MESSAGE
LOAD T2,RBCNT ;# BYTES TO DUMP THIS TIME
CALL MAKTWO ;PUT INTO MESSAGE
MOVEI T1,7 ;# BYTES IN MESSAGE
MOVEM T1,XMPLNG
RETSKP
;MAKTWO - ROUTINE TO ADD A TWO-BYTE NUMBER TO A MESSAGE
;
;ACCEPTS IN T1/ BYTE POINTER TO DESTINATION IN MESSAGE
; T2/ NUMBER TO BE ADDED TO MESSAGE
; CALL MAKTWO
;RETURNS: +1 ALWAYS, WITH T1/ UPDATED BYTE POINTER TO NEXT FIELD IN MESSAGE
MAKTWO:: IDPB T2,T1 ;PUT LOW ORDER BYTE INTO MESSAGE FIRST
LSH T2,-8 ;RIGHT-ADJUST HIGH ORDER BYTE OF NUMBER
IDPB T2,T1 ;DEPOSIT HIGH ORDER BYTE INTO MESSAGE NEXT
RET ;RETURN, WITH UPDATED POINTER IN T1
;MAK4 - ROUTINE TO ADD A FOUR-BYTE NUMBER TO A MESSAGE
;
;ACCEPTS IN T1/ POINTER TO NEXT FIELD IN MESSAGE
; T2/ NUMBER TO BE ADDED TO THE MESSAGE
; CALL MAK4
;RETURNS +1 ALWAYS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
MAK4: ASUBR <PT4PTR,PT4NUM>
; ADD THE FIRST TWO BYTES TO THE MESSAGE
MOVE T1,PT4PTR ;GET POINTER TO NEXT FIELD
MOVE T2,PT4NUM ;GET NUMBER TO BE ADDED
CALL MAKTWO ;ADD NEXT TWO BYTES TO MESSAGE
; ADD THE NEXT TWO BYTES TO THE MESSAGE
MOVE T2,PT4NUM ;GET THE NUMBER TO BE ADDED AGAIN
LSH T2,-^D16 ;SHIFT TO POSITION THE NEXT TWO BYTES TO ADD
CALLRET MAKTWO ;ADD NEXT TWO BYTES TO THE MESSAGE AND RETURN
;GET4 - ROUTINE TO GET A FOUR-BYTE FIELD FROM A MESSAGE
;
;ACCEPTS IN T1/ POINTER TO NEXT FIELD IN MESSAGE
; CALL GET4
;
;RETURNS: +1 ALWAYS, WITH T1/ UPDATED POINTER TO NEXT FIELD
; T2/ FOUR-BYTE NUMBER FROM MESSAGE
GET4: ASUBR <GT4PTR,GT4NUM>
MOVE T1,GT4PTR ;GET MESSAGE POINTER
MOVEI T2,4 ;NUMBER OF BYTES TO GET
CALL GETTWO ;GET TWO OF THEM
JFCL
MOVEM T3,GT4NUM ;SAVE THESE
CALL GETTWO ;GET NEXT TWO
JFCL
DPB T3,[POINT 16,GT4NUM,19] ;ADD HIGH ORDER BYTES TO NUMBER
MOVE T2,GT4NUM ;THIS IS THE RESULT
RET
;
;GETTWO - ROUTINE TO GET A TWO FIELD FROM A MESSAGE
;
;ACCEPTS T1/ POINTER TO NEXT FIELD IN MESSAGE
; T2/ COUNT OF BYTES LEFT IN MESSAGE
;
;RETURNS: +1 FAILURE
; +2 WITH T1/ UPDATED BYTE POINTER
; T2/ UPDATED BYTE COUNTER
; T3/ NUMBER FROM MESSAGE
;
GETTWO:
SOSG T2 ;ANY MORE?
RET ;NO
ILDB T3,T1 ;GET NEXT BYTE FROM MESSAGE
SOSGE T2 ;ANY MORE?
RET ;NO
ILDB T4,T1 ;GET SECOND BYTE
DPB T4,[POINT 8,T3,27] ;MERGE TWO TOGETHER
RETSKP
SUBTTL GENERAL SUBROUTINES
; ROUTINE TO CLEAR GTJFN BLOCK USED BY COMND JSYS
;
; CALL: CALL CLRGJF
; RETURNS: +1 ALWAYS
CLRGJF: MOVE T1,[GJFBLK,,GJFBLK+1] ;SET UP TO CLEAR GTJFN BLOCK
SETZM GJFBLK ;CLEAR FIRST WORD OF BLOCK
BLT T1,GJFBLK+GJFSIZ-1 ;CLEAR GTJFN BLOCK
RET ;RETURN TO WHENCE WE CAME ...
; ROUTINE TO OUTPUT COMMAND LINE TO TERMINAL IF PROCESSING TAKE FILE
;
; CALL: CALL TAKTST
; RETURNS: +1 ALWAYS, COMMAND LINE OUTPUT IF NEEDED
TAKTST: HRROI T1,BUFFER ;GET POINTER TO COMMAND LINE
SKIPE TAKFLG ;COMMANDS COMING FROM FILE ?
PSOUT ;YES, OUTPUT COMMAND LINE
RET ;RETURN
; ROUTINE TO CLOSE A LOADER/OPERATING SYSTEM FILE
CLSFIL:
LOAD T1,RBJFN ;GET THE JFN
SKIPN T1 ;IS IT ZERO?
RET ;NONE, JUST RETURN
CLOSF ;CLOSE THE FILE
JFCL ;IGNORE ERRORS
RET ;ALWAYS RETURN +1
;CLRMOP - ROUTINE TO CLEAR THE MOP MESSAGE AREA
;
;CALL: CALL CLRMOP
;RETURNS: +1 ALWAYS
CLRMOP: HRRI T1,1+XMPMSG ;GET ADDRESS OF MOP MESSAGE AREA + 1
HRLI T1,-1(T1) ;FORM ADDRESS,,ADDRESS+1 FOR BLT
SETZM XMPMSG ;CLEAR THE FIRST WORD OF THE AREA
BLT T1,MOPSIZ-1+XMPMSG ;CLEAR REMAINDER OF MOP MESSAGE AREA
RET ;RETURN
;ROUTINE TO CLEAR THE BOOT JSYS ARGUMENT BLOCK
CLRBOT:
HRRI T1,1+BTARG ;GET ADDRESS OF BOOT JSYS ARG BLOCK
HRLI T1,-1(T1) ;FORM ADDRESS,,ADDRESS+1 FOR BLT
SETZM BTARG ;CLEAR THE FIRST WORD
BLT T1,BTSIZ-1+BTARG ;CLEAR REMAINDER
RET
;ROUTINE TO FLUSH ALL OUTSTANDING DDCMP MESSAGES ON A LINE
FLUSH:
SKIPN LDTYP ;DONT DO THIS FOR A DTE
RETSKP
CALL CLRBOT ;CLEAR THE BOOT JSYS ARG BLOCK
MOVE T1,LDDEV ;GET THE LOAD/DUMP DEVICE LINE NUMBER
MOVEM T1,BTARG+.BTDTE ;SAVE IN ARG BLOCK
MOVEI T1,RMPMSG ;WHERE TO RECEIVE THE MESSAGES
MOVEM T1,BTARG+.BTMSG ;
MOVEI T1,MAXBYT ;MAXIMUM MESSAGE LENGTH WE WILL ACCEPT
MOVEM T1,BTARG+.BTLEN ;
MOVEI T1,.BTRDD ;READ FUNCTION
MOVEI T2,BTARG ;ADDRESS OF ARG BLOCK FOR BOOT JSYS
BOOT
ERJMP [ERRMSG(.ERR44,RET)]
SKIPE .BTLEN(T2) ;NO MORE, SO FINISHED
JRST FLUSH ;MORE THERE, GO FLUSH THEM TOO
RETSKP ;RETURN
;ROUTINE TO SAVE ALL THE Q REGISTERS
SAVQ:: PUSH P,Q1 ;SAVE THE ACS
PUSH P,Q2
PUSH P,Q3
CALL 0(CX) ;RETURN TO CALLER
RESTQ: SKIPA ;NON-SKIP RETURN
AOS -3(P) ;SKIP RETURN
POP P,Q3 ;RESTORE ACS
POP P,Q2
POP P,Q1
RET ;AND RETURN
;CMDERR - ROUTINE TO PROCESS ERRORS ON EXECUTING A COMND JSYS
; IF END OF FILE REACHED ON A TAKE FILE, THE NEXT COMMAND
; IS SIMPLY PROCESSED. ELSE AN ERROR MESSAGE IS ISSUED AND
; THE PROGRAM IS RESTARTED.
;
; CALL: JRST CMDERR
CMDERR: SKIPN TAKFLG ;PROCESSING A TAKE FILE ?
JRST CMER10 ;NO, GO ISSUE ERROR MESSAGE
HRRZ T1,CMDBLK+.CMIOJ ;GET INPUT FILE JFN FOR TAKE FILE
GTSTS ;GET THE FILE'S STATUS
TXNN T2,GS%EOF ;AT END OF FILE ?
JRST CMER10 ;NO, GO ISSUE ERROR MESSAGE
MOVE T1,[.PRIOU,,.PRIIN] ;YES, GET STANDARD PRIMARY JFN'S
MOVEM T1,CMDBLK+.CMIOJ ;RESET INPUT AND OUTPUT JFN'S
SETZM TAKFLG ;MARK THAT TAKE FILE NOT BEING PROCESSED
JRST PARSE ;GO PROCESS NEXT COMMAND
CMER10: CALL TSTCOL ;ISSUE NEW LINE IF NEEDED
TMSG <? DNLOAD: Unexpected COMND JSYS error, restarting...
> ;OUTPUT MESSAGE
JRST ENTVEC+1 ;GO SIMULATE A "REENTER"
CMEREX:
;COMMAND EXECUTION ERROR. T4 MUST BE SET UP TO HAVE THE POINTER
;TO THE ERROR MESSAGE ON ENTRY.
CALL TSTCOL ;CHECK IF A NEW LINE IS NEEDED.
HRRO T1,ERRTAB(T4) ;SET UP POINTER TO ERRORSTRING
CALLRET @[Z TYPATM
Z TYPERR](T3)
;ERROR TYPEOUT ROUTINE WHICH DOES NOT TYPE OUT THE ATOM BUFFER
TYPERR:
PUSH P,T1 ;SAVE ERROR MESSAGE POINTER
TMSG <?DNLOAD: >
POP P,T1 ;RESTORE IT
PSOUT
TMSG <"
>
RET
;SYSERR REPORTING ROUTINE
SYERPT: SKIPN LDTYP ;ONLY FOR DN22
RET
MOVX T1,<BYTE (9) SEC%NL (8) 0 (1) HRC%RB (6) HRC%FM (3) HRC%HL (9) 0>
MOVEM T1,SYEHDR ;SET UP SYSERR HEADER BLOCK
GTAD
MOVEM T1,SYEHDR+1 ;TIME AND DATE
SETZM SYEHDR+2 ;UPTIME NOT USED.
MOVE T1,[SIXBIT/APRID/]
SYSGT
MOVEM T1,SYEHDR+3 ;PROCESSOR ID
MOVE T1,SYERET ;ADJUST ERROR CODE
ADDI T1,1
MOVEM T1,SYERET
MOVEI T1,SYEHDR ;ADDRESS OF SYSERR BLOCK
HLRO T2,SYFNAM ;# CHARACTERS IN FILE SPC
MOVMS T2 ;MAGNITUDE
ADDI T2,4 ;PREPARE TO ROUND
IDIVI T2,5 ;NUMBER OF WORDS
ADDI T2,<SYFSPC-SYEDAT> ;LENGTH OF SYSERR ENTRY
ANDI T2,777
IORM T2,SYEHDR ;PUT IN HEADER
ADDI T2,4 ;INCLUDE HEADER LENGTH
SYERR ;PUT ENTRY INTO SYSERR FILE
JFCL
RET
SUBTTL CONSTANTS AND TABLES
; FDB CHAIN FOR LOAD COMMAND
LSTCHN: FLDDB. (.CMNOI,,<TXT(LISTENING ON)>,,,<[FLDDB. (.CMDEV,,,,,<[FLDDB. (.CMCFM)]>)]>)
CMDTAB: CMDSIZ-1,, CMDSIZ ;CURRENT,,MAX SIZE OF COMMAND TABLE
TB (.CONVR,CONVERSE) ;CONVERSE (WITH) DEVICE-SPEC
TB (.DLOAD,DLOAD) ;DLOAD (DTE20) N (FROM) FILE-SPEC ...
TB (.DUMP,DUMP) ;DUMP (DTE20) N (TO) FILESPEC
TB (.EXIT,EXIT) ;EXIT TO MONITOR
TB (.HELP,HELP) ;OUTPUT HELP MESSAGE
TB (.LOAD,LOAD) ;LOAD (DTE20) N (FROM) FILE-SPEC ...
TB (.RESUM,RESUME) ;RESUME (LISTENING)
TB (.START,START) ;START version (protocol on dte) n
TB (.STOP,STOP) ;STOP (protocol on dte) n
TB (.TAKE,TAKE) ;TAKE (COMMANDS FROM) FILE-SPEC ...
CMDSIZ== .-CMDTAB
LDDVTB: LTBSIZ-1,,LTBSIZ ;SIZE OF TABLE LISTING LOADABLE DEVICES
TB (LDDMC,DN22) ;LOAD THE REMOTE DN200 (ON A 2020)
TB (LDDTE,DTE) ;LOAD THE DTE (ON A 2050)
TB (LDKMC,KMC) ;LOAD THE KMC (ON A 2020)
TB (LDPDP,PDP11) ;**PDP** Load a DECnet node
;**PDP** (will reload u-code of KMC11)
LTBSIZ==.-LDDVTB
DPDVTB: DTBSIZ-1,,DTBSIZ ;SIZE OF TABLE LISTING DUMPABLE DEVICES
TB (DMP200,DN22) ;DUMP A DN200
TB (DMPDTE,DTE) ;DUMP A DTE
TB (DMPKMC,KMC) ;DUMP A KMC
DTBSIZ==.-DPDVTB
PRVRTB: PRVRSZ-1,,PRVRSZ ;table to read protocol version
TB (PRD22,DN22) ;DN22
TB (PRD60,DN60) ;DN60
TB (PRMCB,MCB) ;MCB
TB (PR20F,RSX20F) ;RSX20F
PRVRSZ==.-PRVRTB
PROMPT: ASCIZ /DNLOAD>/ ;PROMPT STRING
CRAMPG: BLOCK 1000
DRAMPG: BLOCK 1000
;ERROR CODES
;MACRO TO DEFINE THE ERROR CODES.
DEFINE ERCODS <
XLIST
ERR .ERR0,<Illegal command to DNLOAD >
ERR .ERR1,<Invalid device as target of load/dump>
ERR .ERR2,<Incorrect command format>
ERR .ERR3,<Failed to open KMC ucode file>
ERR .ERR4,<BOOT JSYS error on KMC load>
ERR .ERR5,<KMC load file has bad format>
ERR .ERR6,<DLOAD a KMC is illegal>
ERR .ERR7,<Bad device number>
ERR .ERR10,<Unit number out of range>
ERR .ERR11,<Failed to open secondary loader file>
ERR .ERR12,<Invalid format for secondary loader file>
ERR .ERR13,<Attempt to load secondary loader failed>
ERR .ERR14,<Attempt to trigger the ROM failed>
ERR .ERR15,<MOP reply from secondary loader failed>
ERR .ERR16,<MOP reply from secondary loader bad>
ERR .ERR17,<Bad file spec>
ERR .ERR20,<Incorrect command format parsing LISTEN field>
ERR .ERR21,<End of command expected>
ERR .ERR22,<Specified device not a terminal>
ERR .ERR23,<Unexpected error building a MOP message>
ERR .ERR24,<Error transmitting MOP msg during tertiary or OPS load>
ERR .ERR25,<Error receiving MOP msg during tertiary or OPS load>
ERR .ERR26,<Wrong load number requested from loader during tertiary or OPS load>
ERR .ERR27,<Failed to open tertiary loader file>
ERR .ERR30,<Failed to open Operating System file>
ERR .ERR31,<Bad transfer address>
ERR .ERR32,<Not a valid extension for bootstrap file>
ERR .ERR33,<Cannot open file for output>
ERR .ERR34,<Error reading load file>
ERR .ERR35,<Dump program dis not respond correctly after load>
ERR .ERR36,<Secondary bootstrap loader/dumper too long>
ERR .ERR37,<Error transmitting MOP msg during transfer of dump data>
ERR .ERR40,<Expected dump record did not arrive from the FE>
ERR .ERR41,<Dump data record from FE incorrect>
ERR .ERR42,<Error writing dump file>
ERR .ERR43,<Cannot initialize protocol to FE>
ERR .ERR44,<Error flushing DDCMP buffers>
ERR .ERR45,<Program request for unidentified program received from loader>
ERR .ERR46,<Could not assign listening terminal line>
ERR .ERR47,<Could not terminate protocol, continuing...>
ERR .ERR50,<Wheel or Operator priveleges must be enabled>
ERR .ERR51,<invalid protocol version>
LIST
>
DEFINE ERR(A,B)<
A==:ZZ
[ASCIZ\B\]
ZZ=ZZ+1>
ZZ=0
ERRTAB: ERCODS ;DEFINE THE LIST OF ERROR MESSAGES
; LEVEL TABLE FOR INTERRUPT SYSTEM
LEVTAB: RETPC1
RETPC2
RETPC3
; ENTRY VECTOR DEFINITION
ENTVEC: JRST START ;MAIN ENTRY POINT
JRST START ;REENTER ENTRY POINT
EXP VDNLOAD ;VERSION OF DNLOAD PROGRAM
; HELP TEXT
XLIST
HLPMSG: ASCIZ \
DNLOAD Program
FUNCTION
Loads programs in PDP-11 .BIN format into secondary
Front-ends on a DECsystem-20.
Dumps the contents of PDP-11 memory to a file in the
TOPS-20 filesystem.
Permits characters to be sent to the program in the PDP-11
and allows output from the PDP-11 program to appear on
the terminal on which DNLOAD is running.
COMMANDS
LOAD (DTE20) n (FROM) FILE-SPEC (LISTENING ON) MCBn:
DUMP (DTE20) n (TO) file-spec
DLOAD (DTE20) N (FROM) FILE-SPEC (LISTENING ON) TTYN:
RESUME (LISTENING)
TAKE (COMMANDS FROM) file-spec
HELP
EXIT
OPERATION
The LOAD command is used to load standard system
software into a DN20 Front-End. At the completion
of loading a communications protocol initiation will
occur so that the software in the PDP-11 may begin
operation.
The DLOAD command is used to load a diagnostic
program into a Front-End. It is identical to the
LOAD command, but does not perform the protocol
initiation.
The LISTENING option on the LOAD and DLOAD commands
will output characters from the indicated TOPS-20
terminal line to the terminal on which DNLOAD is
being run.
After loading a program with the DLOAD command,
DNLOAD will accept characters from the terminal to
be sent to the program just loaded. All input to
DNLOAD will be sent to the DN20. To return to
DNLOAD command level, enter CTRL/E (^E). The RESUME
command may be used to continue listening after
CTRL/E has been entered.
RESTRICTIONS
WHEEL OR OPERATOR capability must be enabled to use
the LOAD, DLOAD, OR DUMP commands.
The terminal line used for LISTENING should be
deassigned (using the TOPS-20 DEASSIGN command)
when finished running DNLOAD.
\
LIST
SUBTTL VARIABLE DATA STORAGE
;INTERRUPT CHANNELS
RADIX 5+5
CHNTAB:
ICH000: BLOCK 1 ;ASSIGNABLE CHANNEL 0
ICH001: BLOCK 1 ;ASSIGNABLE CHANNEL 1
ICH002: BLOCK 1 ;ASSIGNABLE CHANNEL 2
ICH003: BLOCK 1 ;ASSIGNABLE CHANNEL 3
ICH004: BLOCK 1 ;ASSIGNABLE CHANNEL 4
ICH005: BLOCK 1 ;ASSIGNABLE CHANNEL 5
ICHAOV: BLOCK 1 ;ARITHMETIC OVERFLOW
ICHFOV: BLOCK 1 ;FLOATING OVERFLOW
ICH008: BLOCK 1 ;RESERVED
ICHPOV: BLOCK 1 ;PDL OVERFLOW
ICHEOF: BLOCK 1 ;END OF FILE
ICHDAE: BLOCK 1 ;DATA ERROR
ICHQTA: BLOCK 1 ;QUOTA EXCEEDED
ICH013: BLOCK 1 ;RESERVED
ICHTOD: BLOCK 1 ;TIME OF DAY (RESERVED)
ICHILI: BLOCK 1 ;ILLEG INSTRUCTION
ICHIRD: BLOCK 1 ;ILLEGAL READ
ICHIWR: BLOCK 1 ;ILLEGAL WRITE
ICHIEX: BLOCK 1 ;ILLEGAL EXECUTE (RESERVED)
ICHIFT: BLOCK 1 ;INFERIOR FORK TERMINATION
ICHMSE: BLOCK 1 ;MACHINE SIZE EXCEEDED
ICHTRU: BLOCK 1 ;TRAP TO USER (RESERVED)
ICHNXP: BLOCK 1 ;NONEXISTENT PAGE REFERENCED
ICH023: BLOCK 1 ;ASSIGNABLE CHANNEL 23
ICH024: BLOCK 1 ;ASSIGNABLE CHANNEL 24
ICH025: BLOCK 1 ;ASSIGNABLE CHANNEL 25
ICH026: BLOCK 1 ;ASSIGNABLE CHANNEL 26
ICH027: BLOCK 1 ;ASSIGNABLE CHANNEL 27
ICH028: BLOCK 1 ;ASSIGNABLE CHANNEL 28
ICH029: BLOCK 1 ;ASSIGNABLE CHANNEL 29
ICH030: BLOCK 1 ;ASSIGNABLE CHANNEL 30
ICH031: BLOCK 1 ;ASSIGNABLE CHANNEL 31
ICH032: BLOCK 1 ;ASSIGNABLE CHANNEL 32
ICH033: BLOCK 1 ;ASSIGNABLE CHANNEL 33
ICH034: BLOCK 1 ;ASSIGNABLE CHANNEL 34
ICH035: BLOCK 1 ;ASSIGNABLE CHANNEL 35
RADIX 8
SAVRET: BLOCK 1 ;RETURN ADDRESS OF CMDINI CALLER
SAVREP: BLOCK 1 ;SAVED STACK POINTER TO RESTORE ON REPARSE
RETPC1: BLOCK 1 ;RETURN PC FOR INTERRUPT LEVEL 1
RETPC2: BLOCK 1 ;RETURN PC FOR INTERRUPT LEVEL 2
RETPC3: BLOCK 1 ;RETURN PC FOR INTERRUPT LEVEL 3
CMDBLK: BLOCK .CMGJB+5 ;COMMAND STATE BLOCK FOR COMND JSYS
BUFFER: BLOCK BUFSIZ ;INPUT TEXT STORED HERE
ATMBFR: BLOCK ATMSIZ ;ATOM BUFFER FOR COMND JSYS
GJFBLK: BLOCK GJFSIZ ;GTJFN BLOCK FOR COMND JSYS
PDL: BLOCK PDLEN ;PUSH DOWN POINTER
NOIFDB: BLOCK FDBSIZ ;FUNCTION DESCRIPTOR BLOCK FOR NOISE WORDS
NAMBUF: BLOCK 8 ;BUFFER FOR NAME OF INPUT FILE
INJFN: BLOCK 1 ;INPUT JFN FOR TAKE COMMAND
OUTJFN: BLOCK 1 ;OUTPUT JFN FOR TAKE COMMAND
TAKFLG: BLOCK 1 ;NON-ZERO IF PROCESSING INDIRECT FILE
MAXMEM: BLOCK 1 ;MAX # OF BYTES IN MOP MSG(LOADER DEPENDENT)
RBLOCK: BLOCK MAXBSZ
INPJFN: BLOCK 1 ;JFN OF SECONDARY BOOTSTRAP LOAD FILE
DATWRD: BLOCK 1 ;CURRENT DATA WORD
TXTBLK: BLOCK TXTSIZ ;TEXTI BLOCK
DCOMND: BLOCK DCOSIZ ;DIAG COMMAND TEXT BLOCK
BYTNUM: BLOCK 1 ;NUMBER OF NEXT BYTE TO INPUT
PROCES: BLOCK 1 ;HANDLE OF PROCESS LISTENING ON LINE
LINJFN: BLOCK 1 ;DESIGNATOR OF LINE BEING LISTENED TO
STRING: BLOCK 8 ;TEMPORARY STRING AREA
BTARG: BLOCK BTSIZ
MOPSIZ==1000
XMPLNG: BLOCK 1 ;MOP MESSAGE LENGTH
RMPLNG: BLOCK 1 ;RECEIVE MOP MSG LENGTH
XMPMSG: BLOCK MOPSIZ
RMPMSG: BLOCK MOPSIZ ;RECEIVE MOP MSG AREA
LDTYP: BLOCK 1 ; LOAD DEVICE TYPE
LDTPDP: BLOCK 1 ;**PDP** Loading DECnet node if set.
LDDEV: BLOCK 1 ;LOAD DEVICE #
PTYPE: .VND60 ;protocol version to start
LDFIL: BLOCK 1 ;POINTER TO FILE-SPEC TO LOAD
LDLIN: BLOCK 1 ;LINE TO LISTEN ON
LDNUM: BLOCK 1 ;LOAD NUMBER
LDFLG: BLOCK 1 ;FLAG
PROFLG: BLOCK 1 ;flag for start/stop protocol
LDMSIZ: BLOCK 1 ;MEMORY SIZE OF LOAD/DUMP TARGET
LDRTRY: BLOCK 1 ;CURRENT RETRY COUNTER
SYEHDR: BLOCK 4 ;SYSERR HEADER BLOCK
SYEDAT:
SYETAR: -4,,5 ;POINTER TO TARGET NAME
SYESER: -6,,6 ;POINTER TO SERVER NAME
SYELIN: -7,,10 ;POINTER TO LINE NUMBER
SYFNAM: 0,,12 ;FILE NAME FOR SYSERR
SYERET: BLOCK 1 ;RETURN CODE
ASCII/DN22/
ASCII/DNLOAD/
SYEDEV: ASCII/KDP_0_0/
SYFSPC: BLOCK 50
PAT: BLOCK 100
END <3,,ENTVEC>