Trailing-Edge
-
PDP-10 Archives
-
BB-J845A-SM
-
source/minint.p11
There are 8 other files named minint.p11 in the archive. Click here to see a list.
.SBTTL MINOR INTERRUPTS AND MISCELLANEOUS
;
; THIS SECTION CONTAINS THE MINOR INTERRUPTS
; (PARITY ERROR, BUS TRAP, ILLEGAL INSTRUCTION,
; IOT INSTRUCTION, EMT INSTRUCTION, TRACE TRAP (BPT
; INSTRUCTION AND T-BIT), CLOCK, POWER FAIL AND UNKNOWN).
; THIS SECTION ALSO CONTAINS THE CODE TO RECORD TRACE
; INFORMATION, WHICH IS DRIVEN BY THE TRACE INTERRUPT
; OR BY THE TRACE MACRO. THE CHUNK OWNERSHIP RECORDING
; SUBROUTINES AND THE KG11-A SIMULATOR HAVE BEEN
; INCLUDED HERE FOR LACK OF ANY
; OBVIOUSLY BETTER PLACE TO PUT THEM.
;
.REPT 0
COPYRIGHT (c) 1980, 1979
DIGITAL EQUIPMENT CORPORATION, maynard, mass.
THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
TRANSFERRED.
THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
CORPORATION.
DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
.ENDR
;
;
; REVISION HISTORY
;
; 3(001) BS MODIFIED TO SAVE REGISTERS ON STOPCODE WITH DEBUG OFF
;
;
VMINNT=001
;
;
VEDIT=VEDIT+VMINNT
;
;
;
;
;
;
;
; COME HERE FOR VARIOUS TRAPS. BUS ERROR TRAP WITH THE DL10
; DISABLED CAUSES A SPECIAL EXIT. ALL OTHER TRAPS ARE
; FATAL.
;
; HERE ON PARITY ERROR INTERRUPT.
;
MP.INT: MOV MP.REG,MEMERR ;SAVE FOR INTERESTED PARTIES
STOPCD MEM ;HALT.
;
; HERE ON BUS TIMEOUT.
;
NXMINT: MOV (SP)+,NXMPC ;RECORD PC OF BUS TRAP
MOV NXMGO,-(SP) ;REPLACE WITH SPECIFIED PC
RTI ; GO THERE, RESTORING INTERRUPTS
;
; NORMALLY, BUS TRAPS COME HERE.
;
NXMNRM: TST DLGONE ;DO WE ALREADY KNOW THE DL10 IS GONE?
BEQ 11$ ;NO, SPECIAL EXIT.
STOPCD NXM ;YES, MUST BE FATAL ERROR.
;
; HERE ON BUS ERROR TRAP AND THE DL10 IS DISABLED. DO SPECIAL
; BRANCH IF REQUESTED.
;
11$: TST NXMSP ;ANY SPECIAL EXIT SPECIFIED?
BEQ 12$ ;NO.
MOV #-1,DLGONE ;YES, NOTE DL10 IS NOW GONE.
CLR DLGNTM ;WAIT A WHILE BEFORE TRYING TO RESTART IT
MOV NXMSP,SP ;LOAD STACK POINTER
CLR NXMSP ;ONLY DO THIS ONCE
SEC ;SET "C" AS A FLAG
RTS PC ;AND RETURN TO CALLER.
;
; HERE IF NO SPECIAL EXIT SPECIFIED
;
12$: STOPCD NXM ;HALT.
;
;
; HERE ON ILLEGAL INSTRUCTION, IOT, EMT AND RANDOM
; INTERRUPT.
;
ILSINT:
.IF NE,DEBUG
MOV (SP)+,ILSERR ;SAVE TRAP INFO
MOV (SP)+,ILSERR+2 ; IN CASE ANYBODY IS INTERESTED
STOPCD ILS ;HALT
.ENDC ;.IF NE,DEBUG
IOTINT:
.IF NE,DEBUG
MOV (SP)+,ILSERR ;SAVE TRAP INFO
MOV (SP)+,ILSERR+2 ; IN CASE ANYBODY IS INTERESTED
STOPCD ILS ;HALT
.ENDC ;.IF NE,DEBUG
EMTINT:
.IF NE,DEBUG
MOV (SP)+,ILSERR ;SAVE TRAP INFO
MOV (SP)+,ILSERR+2 ; IN CASE ANYBODY IS INTERESTED
STOPCD ILS ;HALT
.ENDC ;.IF NE,DEBUG
ERRINT: MOV (SP)+,ILSERR ;SAVE TRAP INFO
MOV (SP)+,ILSERR+2 ;IN CASE ANYBODY IS INTERESTED
STOPCD ILS ;HALT.
;
; HERE ON POWER FAIL. NO ATTEMPT IS MADE TO RECOVER, SINCE
; IT IS PRUDENT TO RUN CHK11 AFTER A POWER FAILURE.
;
PWFINT:
.IIF NDF,FT2020, HALT ;POWER FAILURE.
.IIF DF,FT2020, BR . ;DON'T HALT FOR 2020s
;
;
; HERE ON TRAP INSTRUCTION. THIS IS USED ONLY BY THE STOPCD
; MACRO.
;
TRPINT: MOV (SP)+,TRPERR ;SAVE TRAP INFO
MOV (SP)+,TRPERR+2 ;IN CASE ANYBODY IN INTERESTED
MOV R0,STOPR0 ;SAVE THE ACS
MOV R1,STOPR1 ;FOR DEBUGGING
MOV R2,STOPR2
MOV R3,STOPR3
MOV R4,STOPR4
MOV R5,STOPR5
MOV SP,STOPSP ;SAVE STACK POINTER, TOO.
.IF NE,DEBUG
.IF EQ,FTKG11 ;IF WE HAVE A KG11-A...
MOV @#KG.STS,STOPKG ;SAVE KG11-A REGISTERS
MOV @#KG.BCC,STOPKG+2
MOV @#KG.DTA,STOPKG+4
.ENDC ;.IF EQ,FTKG11
CLR R5 ;LINE NUMBER*2
11$: MOV DQLCB(R5),R4 ;GET LINE CONTROL BLOCK
BEQ 12$ ;NONE
JSR PC,TRAPDQ ;STORE THE DQ11'S REGISTERS IN THE LCB
12$: ADD #2,R5 ;GO TO NEXT LINE
CMP #NLINES*2,R5 ;DONE ENOUGH?
BNE 11$ ;NO, DO ANOTHER.
.ENDC ;.IF NE,DEBUG
.IF NE,FT.KMC
JSR PC,TRAPMD ;STOP THE KMC11S [1A(731)]
.ENDC ;.IF NE,FT.KMC
MOV TRPERR,R0 ;GET OLD PC
SUB #2,R0 ;POINT TO TRAP INSTR
MOVB (R0),TRPCOD ;GET TRAP CODE
BNE 13$ ;BRANCH IF VALID CODE
.IIF NDF,FT2020, HALT ;NOT--SOMETHING VERY WRONG!
.IIF DF,FT2020, BR . ;DON'T HALT ON A 2020
;
13$: MOV TRPCOD,R1 ;FETCH STOP CODE
JSR PC,DLSTCS ;STORE STOP CODE SO PDP-10 CAN SEE IT.
14$: MOV TRPCOD,R0 ;SHOW STOP CODE IN LIGHTS (11/40)
.IF NDF,FT2020 ;IF NOT ON A 2020
HALT ;ALL DONE.
BR 14$ ;DON'T ALLOW "CONTINUE".
.ENDC ;END IF NDF,FT2020
.IIF DF,FT2020, BR . ;DON'T HALT ON A 2020
;
;
; CLOCK INTERRUPTS. THESE COME ONCE A JIFFIE FROM THE
; KW11-L.
;
CLKINT: INC JIFCLK ;INCREMENT JIFFIE CLOCK
BIT #77,JIFCLK ;HAVE A MULT. OF 64 JIFFIES PAST?
BNE 12$ ;NO.
MOV DSPMTY,DSPMTT ;YES, RECORD NULL TIME
BNE 11$ ;BETTER BE NON-ZERO
STOPCD LOP ;NO NULL TIME ACCUMULATED
;
; HERE IF THE NULL TIME IN THE LAST 64. TICKS IS NON-ZERO.
;
11$: CLR DSPMTY ;CLEAR COUNTER FOR NEXT PERIOD
CMP DSPMTX,DSPMTT ;LARGER MAX THAN BEFORE?
BGE 12$ ;NO.
MOV DSPMTT,DSPMTX ;YES, RECORD NEW MAX
12$: RTI ; AND EXIT THE INTERRUPT.
;
.SBTTL TRACE TRAP INTERRUPTS
;
; HERE ON TRACE INTERRUPTS, CAUSED BY BIT 4 IN THE PS.
; RECORD THE CURRENT PC AND PS FOR DEBUGGING.
;
.IF NE,FTRACE
.IFT
BPTINT: MOV R0,-(SP) ;SAVE R0
TST TRCBTS ;ARE WE DOING EVENT TRACING?
BNE 12$ ;YES, DONT DO INSTRUCTION TRACING
MOV TRCPTR,R0 ;NO, GET CURRENT POINTER
CMP #TRCTBE,R0 ;REACHED END OF TABLE?
BNE 11$ ;NO.
MOV #TRCTBS,R0 ;YES, SET TO BEGINNING
11$: MOV 2(SP),(R0)+ ;STORE PC IN TABLE
MOV 4(SP),(R0)+ ;STORE PS IN TABLE
MOV R0,TRCPTR ;STORE UPDATED POINTER
;
; THIS IS A GOOD PLACE TO PUT AD-HOCK DEBUGGING CODE, FOR EXAMPLE,
; TO CHECK FOR A LOCATION BEING WIPED OUT.
;
12$:
.IF NE,DEBUG
BR 14$ ;NO SPECIAL CHECKS RIGHT NOW
;
; HERE ON FAILURE.
;
13$: MOV (SP)+,R0 ;RESTORE R0
STOPCD DBG ;DEBUG STOP !!
;
; HERE ON NO FAILURE
;
14$:
.ENDC ;.IF NE,DEBUG
MOV (SP)+,R0 ;RESTORE R0
RTT ;DISMISS TRACE TRAP
.IFF
BPTINT: STOPCD ILS ;ILL INSTR IF NOT TRACING
.ENDC ;.IF NE,FTRACE
;
;
; SUBROUTINE TO RECORD AN EVENT IN THE TRACE TABLE. CALLED
; BY THE "TRACE" MACRO.
;
.IF NE,FTRACE
TRCSBR: MFPS -(SP) ;SAVE INTERRUPT LEVEL
MTPS #BR7 ;DISABLE INTERRUPTS
MOV R0,-(SP) ;SAVE R0
MOV TRCPTR,R0 ;GET TRACE TABLE POINTER
CMP #TRCTBE,R0 ;END OF TABLE?
BNE 12$ ;NO.
BIT #TRCTBO,TRCHLT ;YES, STOP ON BUFFER OVERFLOW?
BEQ 11$ ;NO, WRAP AROUND.
MOV (SP)+,R0 ;YES, RESTORE R0
STOPCD DBG ;TRACE BUFFER OVERFLOW
;
; HERE IF THE TRACE BUFFER IS TO WRAP AROUND.
;
11$: MOV #TRCTBS,R0 ;START OVER AT FRONT OF BUFFER
12$: MOV 4(SP),(R0)+ ;STORE PC IN TABLE
MOV 6(SP),(R0)+ ;STORE ARGUMENT IN TABLE
MOV R0,TRCPTR ;STORE UPDATED TRACE POINTER
MOV (SP)+,R0 ;RESTORE R0
MTPS (SP)+ ;RESTORE INTERRUPT LEVEL
MOV (SP)+,(SP) ;REMOVE ARGUMENT FROM STACK
RTS PC ;RETURN.
.ENDC ;.IF NE,FTRACE
;
.SBTTL CHUNK OWNER RECORDING
.IF NE,CHOWNR
;
; SUBROUTINE TO RECORD THE OWNER OF A CHUNK FOR DEBUGGING
; PURPOSES.
;
; R0 = CHUNK ADDRESS
; R1 = OWNER ID (BIT 0 = 0)
;
CHOWNG: MOV R0,-(SP) ;SAVE CHUNK ADDRESS
JSR PC,CHOWNX ;COMPUTE INDEX INTO OWNER TABLE
CMP R0,#<CHOWNL*2> ;ROOM TO FIT IN TABLE?
BHIS 11$ ;NO, IGNORE IT.
MOV R1,CHOWNT(R0) ;YES, STORE IN TABLE
11$: MOV (SP)+,R0 ;RESTORE CHUNK ADDRESS
RTS PC ;RETURN.
;
; SUBROUTINE TO MARK A CHUNK FREE IN THE OWNER TABLE.
; THE ID OF THE OWNER IS NOT OBLITERATED.
;
; R0 = CHUNK ADDRESS
;
CHOWNF: MOV R0,-(SP) ;SAVE CHUNK ADDRESS
JSR PC,CHOWNX ;COMPUTE INDEX INTO CHUNK OWNER TABLE
CMP R0,#<CHOWNL*2> ;WILL THE TABLE HOLD THIS INDEX?
BHIS 11$ ;NO, IGNORE IT.
BIS #1,CHOWNT(R0) ;YES, FLAG CHUNK NOW FREE.
11$: MOV (SP)+,R0 ;RESTORE CHUNK ADDRESS
RTS PC ;RETURN.
;
;
; SUBROUTINE TO COMPUTE THE INDEX INTO THE OWNER TABLE.
;
; R0 = CHUNK ADDRESS
;
; ON RETURN:
;
; R0 = INDEX INTO THE OWNER TABLE
;
; IF THE CHUNK ADDRESS IS INVALID, THIS SUBROUTINE NEVER RETURNS.
;
CHOWNX: MOV R1,-(SP) ;SAVE R1
MOV R2,-(SP) ; AND R2
SUB #FIRZER,R0 ;CONVERT CHUNK ADDRESS TO RELATIVE
CLR R1 ;COMPARISON ADDRESS
CLR R2 ;INDEX
11$: CMP R0,R1 ;HAVE WE REACHED THE CHUNK?
BEQ 12$ ;YES, R2 HAS THE INDEX.
ADD #CHSIZE,R1 ;NO, INCREASE COMPARISION ADDRESS
ADD #2,R2 ; AND KEEP INDEX IN PARALLEL
BR 11$ ;SEE IF WE HAVE REACHED IT.
;
; HERE IF WE HAVE REACHED THE CHUNK ADDRESS
;
12$: MOV R2,R0 ;PUT INDEX INTO R0
MOV (SP)+,R2 ;RESTORE R2
MOV (SP)+,R1 ; AND R1
RTS PC ;RETURN TO CALLER.
;
.ENDC ;.IF NE,CHOWNR
;
.SBTTL KG11-A SIMULATION SUBROUTINE
;
; SUBROUTINE TO ACCUMULATE A CHARACTER INTO THE BCC.
;
; CALL:
; MOV ARG,-(SP) ;PUT ARG ON STACK
; JSR PC,KGSIMA ;ACCUMULATE BCC
;
; ALL REGISTERS ARE PRESERVED.
;
.IF NE,FTKG11
KGSIMA: MOV R0,-(SP) ;SAVE R0
MOV 4(SP),R0 ;GET ARGUMENT CHARACTER
MOV R1,-(SP) ;SAVE R1
MOV R2,-(SP) ;SAVE R2
MOV KGSIMW,R1 ;R1 = ACCUMULATED CRC
XOR R1,R0 ;EXCLUSIVE OR BYTE WITH OLD CRC
MOV R0,R2 ;SAVE A COPY OF RESULT
BIC #177760,R0 ;EXTRACT LOW 4 BITS
ASL R0 ;BYTE ADDRESS , WORD INDEX
MOV KGTBL(R0),R0 ;GET FIRST MODIFIER WORD
BIC #177417,R2 ;NOW EXTRACT HIGH FOUR BITS
ASR R2 ;SET UP TO ENTER SECOND HALF
ASR R2 ;AGAIN BYTE ADDRESS TO
ASR R2 ;WORD INDEX
MOV KGTBL+32.(R2),R2 ;GET SECOND MODIFIER WORD
XOR R2,R0 ;EXCLUSIVE OR MODIFIER VALUES
CLRB R1 ;CLEAR LOW BYTE OF OLD CRC
SWAB R1 ;NOW WORK ON UPPER BYTE
XOR R0,R1 ;PRODUCE UPDATED CRC
MOV R1,KGSIMW ;SAVE NEW VALUE OF CRC REGISTER
MOV (SP)+,R2 ;RESTORE R2
MOV (SP)+,R1 ;RESTORE R1
MOV (SP)+,R0 ;RESTORE R0
MOV (SP)+,(SP) ;REMOVE ARGUMENT FROM STACK
RTS PC ;RETURN.
;
;
; THIS TABLE IS USED BY THE KG11-A SIMULATOR TO FORM
; A BCC. THE FIRST HALF OF THE TABLE IS INDEXED BY THE
; LOW FOUR BITS, THE SECOND HALF BY THE HIGH FOUR BITS.
;
KGTBL: .WORD 0 ;FIRST HALF OF TABLE
.WORD 140301
.WORD 140601
.WORD 500
.WORD 141401
.WORD 1700
.WORD 1200
.WORD 141101
.WORD 143001
.WORD 3300
.WORD 3600
.WORD 143501
.WORD 2400
.WORD 142701
.WORD 142201
.WORD 2100
.WORD 0 ;SECOND HALF OF TABLE
.WORD 146001
.WORD 154001
.WORD 12000
.WORD 170001
.WORD 36000
.WORD 24000
.WORD 162001
.WORD 120001
.WORD 66000
.WORD 74000
.WORD 132001
.WORD 50000
.WORD 116001
.WORD 104001
.WORD 42000
;
.ENDC ;.IF NE,FTKG11
;
; TTY ROUTINES FOR CHK11
.CKTTS