Trailing-Edge
-
PDP-10 Archives
-
BB-JF18A-BM
-
sources/diu/diu20.b36
There are 4 other files named diu20.b36 in the archive. Click here to see a list.
%TITLE'DIU20 TOPS-20 DIU Main Program'
MODULE DIU20 ( ! Top Level of DIU
MAIN = main,
IDENT= '261',
ENVIRONMENT( STACK=s )
) =
BEGIN
! COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1986.
! ALL RIGHTS RESERVED.
!
! THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND
! COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH
! THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR
! ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE
! AVAILABLE TO ANY OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE
! SOFTWARE IS HEREBY TRANSFERRED.
!
! THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT
! NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL
! EQUIPMENT CORPORATION.
!
! DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF
! ITS SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
! FACILITY: DIU-20 (TOPS-20 Data Interchange Utility)
!
! ABSTRACT: This module initializes the world and parses commands
!
! ENVIRONMENT: TOPS-20 V6.1 RMS V3 XPORT
! FAO-36
!
! AUTHOR: Rick Fricchione CREATED: 4-Feb-1985
! HISTORY:
!
! 261 Remove logical names from LIBRARY statements.
! Gregory A. Scott 7-Jul-86
!
! 165 Edit 163 broke CCL takes, which is fixed now.
! Gregory A. Scott 16-May-86
!
! 164 Clear the noint depth on startup for restarting.
! Gregory A. Scott 16-May-86
!
! 134 Insure that the shutdown flag is cleared before attempting restart.
! Gregory A. Scott 30-Apr-86
!
! 131 Remove the diudbg cell since it is no longer used.
! Gregory A. Scott 28-Apr-86
!
! 126 TAKEFLAG should be zeroed on startup, in case of ^C out of a TAKE or
! EXIT within a take then START.
! Gregory A. Scott 26-Apr-86
!
! 124 Use conditional assembly to set diudeb cell rather than keeping another
! copy of DIU20.B36 around in the debug build area. UnFricchione the
! comments (put them before the code like the rest of the human race).
! Set slave job's program name to DIUDEB if debuging.
! Gregory A. Scott 24-Apr-86
!
! 123 Make restarts work better if we are the spooler.
! Gregory A. Scott 23-Apr-86
!
! V01-000 RDF0001 Rick Fricchione 4-Feb-1985
! Original version of DIU.B36. Get to call DIUCMD, and
! rewrite for new header format.
!
!--
!*************************************************************************
! F O R W A R D R O U T I N E
!*************************************************************************
FORWARD ROUTINE
main : NOVALUE, ! Initializes and calls COMAND
slave : NOVALUE; ! Does detached slave-job thing
!*************************************************************************
! L I B R A R Y F I L E S
!*************************************************************************
LIBRARY 'BLI:XPORT'; ! XPORT of course
LIBRARY 'RMSINT'; ! RMS V3 interface
LIBRARY 'DIU'; ! DIU Definitions
!************************************************************************
! M A C R O A N D B I N D D E C L A R A T I O N S
!************************************************************************
BIND start_address = %O'120',
reenter_address = %O'124';
!************************************************************************
! G L O B A L S T O R A G E
!************************************************************************
GLOBAL s: VECTOR[10000], ! A BIG stack
time_restart, ! The time when we were restarted
interactive, ! 1 if interactive, 0 if spooler subjob
job_index; ! Internal identifier for this stream
!************************************************************************
! E X T E R N A L R O U T I N E S
!************************************************************************
EXTERNAL noint_depth, ! Depth of noints
takeflag, ! if 1 we are in a take
shutdown, ! If 1 we are in the middle of shutdown
mst_flag; ! If 1 we are (yet) the spooler
EXTERNAL ROUTINE DIU$ABORT, ! DIU condition handler
IP_INIT : NOVALUE, ! Init IPCF
IP_FIND, ! Find a request to perform
S$SETNAME : NOVALUE, ! Set my job name
S$ENABLE : NOVALUE, ! Enable capabilities
S$HALT : NOVALUE, ! Halt this fork
S$JOBUSR, ! Get user number from job number
S$USERNAME, ! Get user name from user number
SP$START : NOVALUE, ! Restart the spooler
DEF$INIT : NOVALUE, ! Init list of default blocks
DIU$DO, ! Perform a DIU request
DIUCMD; ! Process DIU commands
!************************************************************************
! M A I N
!************************************************************************
GLOBAL ROUTINE main (request_id,job_handle,c,d,ccl) : NOVALUE =
BEGIN
!++
! FUNCTIONAL DESCRIPTION:
!
! This routine is the top level of DIU. It initializes the world, reads
! the init file and loops calling DIUCMD to process commands. If we're a
! slave job (CCL flag on) then we call SLAVE to fetch and process one
! request from the queue.
!
! FORMAL PARAMETERS:
!
! request_id : request to process if CCL=1, else ignored
! job_handle : internal index which identifies this stream
! c,d : Not used.
! ccl : 0 if entered at normal entry point, 1 if CCL entry
! CCL entry means we are subjob of spooler
!
! SIDE EFFECTS:
!
! DIUCMD is called to process init file and commands if interactive
! SLAVE is called to process requests if not interactive
!
!--
$NOMESSAGE; ! Turn off page-trap checking
takeflag = 0; ! We are not in a take any more
IP_INIT(); ! Init IPCF interface
! Set interactive flag. If we are entered at CCL then we must be running as a
! CRJOBed slave from the spooler to process a request. Otherwise we must be
! reading commands from the terminal
interactive = .ccl XOR 1; ! Interactive if not CCL,
! spooler subjob if CCL
IF .interactive ! If interactive
THEN BEGIN ! Then perform the following
OWN usrbuf : VECTOR[CH$ALLOCATION(60)],
usrdesc : $STR_DESCRIPTOR(STRING=(60,CH$PTR(usrbuf))),
inifab : $FAB(RFM=stm, FAC=NIL, FNA=CH$PTR(usrbuf)),
didini : INITIAL(0);
LOCAL l;
ENABLE DIU$ABORT; ! In case restarting master job
reenter_address = .start_address<0,18>; ! Make REENTER work
IF .didini EQL 0 ! If we have not (yet) read DIU.INIT
THEN BEGIN ! Then read it
DEF$INIT(); ! Initialize default chain first time
l = S$USERNAME(S$JOBUSR(-1),usrdesc); ! Get our user name
$STR_COPY(STRING=$STR_CONCAT('PS:<', ! PS:<loggedindir>DIU.INIT
(.L,.USRDESC[STR$A_POINTER]),
%STRING('>DIU.INIT',%CHAR(0))),
TARGET=USRDESC);
$OPEN(FAB=inifab); ! Open FTS.INIT
! If we could open the file, process it, and set flag
IF .inifab[FAB$H_STS] EQL RMS$_SUC
THEN BEGIN
DIUCMD(.inifab[FAB$H_JFN]);
$CLOSE(FAB=INIFAB);
didini=-1;
END;
END; %(diu.init processing)%
! See if I was (yet) the spooler, and restart me if so.
IF .mst_flag ! Was I the spooler?
THEN BEGIN ! Yes, I am restarting
shutdown = 0; ! We are not (yet) shutting down
mst_flag = 0; ! Not (yet) the spooler again
SP$START(); ! I will be the spooler
END;
! Process commands forever by calling DIUCMD
WHILE 1 ! Forever is a long time
DO DIUCMD(0); ! Process command
END ! (end of interactive DIU block)
! Otherwise, we have to be a slave job so start that up please
ELSE SLAVE(.request_id,.job_handle); ! Process a slave request
END; ! End of Routine MAIN
!************************************************************************
! S L A V E
!************************************************************************
ROUTINE SLAVE (request_id, job_handle) : NOVALUE =
BEGIN
!++
! FUNCTIONAL DESCRIPTION:
!
! Process one request in slave mode. We are running detached, having
! been CRJOBed into existence by the master DIU job. Ask it for a request
! block and go process it.
!
! FORMAL PARAMETERS:
!
! request_id - identifier for the request
! job_handle - internal identifier used by master DIU job
!
! IMPLICIT INPUTS:
! NONE
!
! IMPLICIT OUTPUTS:
! NONE
!
! ROUTINE VALUE and
! COMPLETION CODES:
! NONE
!
! SIDE EFFECTS:
! NONE
!
!--
ENABLE DIU$ABORT;
LOCAL reqchain, ! Pointer to chain of DIU block(s)
template : $DIU_BLOCK; ! Pattern to pick out
!
! Set our name for SYSTAT's use and enable our given capabilities
%IF %SWITCHES(DEBUG)
%THEN S$SETNAME (%SIXBIT'DIUDEB'); ! Debug mode
%ELSE S$SETNAME (%SIXBIT'DIU'); ! Production mode
%FI
S$ENABLE ();
! Record job handle passed to us for use in IPCF reports to master
job_index = .job_handle;
! Clean the request id template and load the request to perform
CLEARV(template);
template[DIU$H_REQUEST_ID] =.request_id;
! Ask the master to find the request
IP_FIND(template,reqchain);
! Now process it if it was returned to us
IF .reqchain NEQ 0 THEN DIU$DO(.reqchain+1);
END; ! End of SLAVE
END ! End of DIU20
ELUDOM ! End of module