Trailing-Edge
-
PDP-10 Archives
-
BB-JF18A-BM
-
sources/rms/rmsdsp.mac
There are 6 other files named rmsdsp.mac in the archive. Click here to see a list.
TITLE RMSDSP -- ENTRY VECTOR AND DISPATCH TABLE FOR RMS
SEARCH RMSINT,RMSMAC,MONSYM ;m501
$PROLOG
REPEAT 0,<
;
; COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1977, 1986.
; ALL RIGHTS RESERVED.
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND
; COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH
; THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR
; ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE
; AVAILABLE TO ANY OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE
; SOFTWARE IS HEREBY TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT
; NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL
; EQUIPMENT CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF
; ITS SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
;
NAME: RMSDSP
AUTHOR: S. BLOUNT
EDIT DATE: 22-Apr-83
FUNCTION: RMS-20 JSYS DISPATCHER
REVISION HISTORY:
EDIT DATE WHO PURPOSE
==== ==== === =======
1 5-MAY-77 SB CHANGE ENTRY DISPATCH VECTOR TO SYMBOLIC FORM
2 12-DEC-79 AU 1. CHANGE REGISTER USAGE SO THAT AC 1 COULD BE
USED THE ARGUMENT POINTER.
2. ADD CODE TO USE RMS'S OWN STACK.
3. MODIFY CODE TO SUIT NEW USER INTERFACE
*************************************************
* *
* NEW REVISION HISTORY *
* *
*************************************************
PRODUCT MODULE SPR
EDIT EDIT QAR DESCRIPTION
====== ====== ===== ===========
60 3 (MBROWN,SWE) Preserve registers 3 and 4; return
status in register 2 for every verb.
66 4 NONE (RL, 19-Apr-83) Fix entry vector
definition. Use MACRO to define EV in
RMSEVC.REL with RMS$EV, rather than
using LINK /START:RMS.EV, which was
changed with LINK v5.1.
71 Add copyright notice to executable
***** END OF REVISION HISTORY *****
***** Start Version 2 development *****
PRODUCT MODULE SPR
EDIT EDIT QAR DESCRIPTION
====== ====== ===== ===========
301 300 XXXXX Support for extended addressing
302 301 (SWE, FTS-20) Allow ERJMP or ERCAL to use indexing
and/or indirection
450 450 (SWE,DIL) (RL, 13-Jan-84) Turn off trapping for
nonexistent page interrupts on entry
to RMS; turn it on again on exit.
If the $NOMESSAGE JSYS has been issued
(which turns on bit 35 in RMSSTS),
then don't do any checking for traps.
*** VERSION 3 ***
501 Development (AN, 17-May-84) Add new functions
507 Development (AN, Jul-84) Put in hooks for $Rename
521 Development (AN, 8-Nov-84) Don't clobber AC2
>;;END OF REPEAT 0
LOC 137 ;FOR VERSION # ON 10
$VERS
$PURE
SUBTTL ENTRY POINTS TO RMS
RELOC 400000
ENTRY RMS.EV
; *** PUSHJ ENTRY LOGIC
;
RMS$10:: REPEAT XX$MAX,<JSR CALDSP>
; Make JSR to not lose AC2 ;m521
;[507] CREATE OFFSET TO IDENTIFY CALLED ROUTINE
;[71] Copyright notice, RL, 1-Jun-83
SMNCPY::ASCIZ\
COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1977, 1986.
ALL RIGHTS RESERVED.
\ ;[71]
CALDSP: Z
MOVEM T2,USERAC##+T2 ;[507] Preserve AC2
MOVE T2,CALDSP ;[507] Get calling addr
SUBI T2,RMS$10+1 ;[3] GET OFFSET INTO TABLE OF ADDRESSES
HRRZM T2,UJSYS ;[3] STORE IT AWAY ;M506
TLNN T2,37 ; SECTION 0? ;A506
JRST [POP P,RETPC ; YES. ;A506
JRST SETUP] ; ;A506
POP P,RETPC+1 ;STORE RETURN ADDRESS AWAY ;M506
JRST SETUP ;AND CONTINUE AS IF THIS WERE A JSYS
; WITH THE /R OPTION, WHATEVER THAT MEANS
; *** JSYS ENTRY LOGIC
RMS.EV==:VECLNG,,RMS$EV ;FOR SETTING RMS20 ENTRY VECTOR WITH LINK... /ST:RMS.EV
RMS$EV::JRST RMS$20 ;ADDRESS OF NORMAL DISPATCHER
JRST RMS20I ;ADDRESS OF RMS INITIALIZATION ROUTINE
$VERS ;RMS VERSION #
UJSYS## ;PLACE TO STORE JSYS CODE FROM MONITOR
RETPC## ;PLACE TO STORE RETURN PC
VECLNG==.-RMS$EV ;LENGTH OF ENTRY VECTOR
RMS$20::
SKIPA ;BYPASS TURN-OFF OF INITED FLAG
RMS20I: SETZM INTFLG## ;SIGNAL THAT THIS IS 1ST CALL
MOVEM T2,USERAC##+T2 ;Don't clobber AC2 ;a521
MOVE T2,UJSYS## ;[3] GET JSYS CODE
HRLI T2,(JSYS) ;[300] Make "JSYS nnn"
CAMLE T2,[RM$MAX] ;[3] JSYS TOO HIGH?
JRST E.JSYS ;YES
SUB T2,[RM$MIN] ;[3] COMPUTE JSYS OFFSET
MOVEM T2,UJSYS## ;[3] STORE OFFSET INTO TABLE
; JRST SETUP ;MERGE WITH PUSHJ ENTRY
SUBTTL RMS COMMON ENTRY/EXIT CODE
;THIS ROUTINE IS THE FIRST ONE TO GET CONTROL AFTER A RMS MACRO
; HAS BEEN EXECUTED. IT PERFORMS THE FOLLOWING FUNCTIONS:
;
; 1. SAVE USER AC'S
; 2. DISPATCH TO PROPER RMS ROUTINE
;
;COME HERE ON EITHER A DIRECT CALL (PUSHJ) OR AN RMS-20 JSYS.
;
SETUP:
SKIPN INTFLG## ;1ST CALL?
JSP T2,RMSINI## ;[300] YES, INIT RMS
MOVE T2,USERAC##+T2 ;Don't clobber AC2 (it was already saved) ;a521
MOVEM 17,USERAC##+17 ;SAVE LAST AC
MOVEI 17,USERAC## ;SET UP TO SAVE USER AC'S
BLT 17,USERAC##+16 ;SAVE THEM
JRST RMSENT ;HOP OVER 1-TIME CODE PUT OUT BY $MAIN
$SCOPE (TOP-LEVEL)
$MAIN (RMSENT,TRAPERR,<IOWD PDLNG##,RMSTACK##>)
;
; See if we are in a nonzero section
; if so, stack should be global.
;
SKIPE RMSSEC ;In nonzero section? ;a525
HLL P,RMSSEC ;Yes. make stack global ;a525
IFN TOP$20,< ;a572
;[450] Turn off trapping for page creation
;[450] Note: By way of a crock, the $NOMESSAGE JSYS
;[450] may be used to skip the following code,
;[450] if trap-checking is not wanted. The
;[450] $NOMESSAGE and $MESSAGE JSYSes no longer
;[450] affect message output, and so are being
;[450] used to control this code. Bit 35 of
;[450] RMSSTS is STSNOMESSAGE, which once turned
;[450] off message output; it now turns off
;[450] trap checking.
;[450]
MOVE T5,RMSSTS## ;[450] Check if we should bother
TRNE T5,1 ;[450] to look at trapping
JRST NOCHK1 ;[450] Don't bother - go on
PUSH 17,T1 ;[450] Save T1
MOVEI T1,.FHSLF ;[450] Get our interrupt mask
RCM% ;[450] ...
ERCAL MONERR## ;[450] ...
AND T1,[EXP 1B22] ;[450] Save .ICNXP bit
MOVEM T1,INTMSK## ;[450] ...
SKIPN INTMSK## ;[450] Is trapping enabled?
JRST NONXP1 ;[450] No - don't worry
MOVEI T1,.FHSLF ;[450] Deactivate the channel
MOVE T2,[EXP 1B22] ;[450] ...
DIC% ;[450] ...
ERCAL MONERR## ;[450] ...
NONXP1: POP 17,T1 ;[450] Restore T1
> ; END IFN TOP$20 ;A572
NOCHK1: MOVEI T2,SU$SUC ;[450] ASSUME A SUCCESSFUL CONCLUSION
MOVEM T2,USRSTS## ;STORE IT IN USER STATUS FIELD
SETZM USTOSF## ;START WITH NO STATUS SUGGESTION
SETZM OAFLAGS ;INDIC NO OPEN ACTIVITY EXTANT
SETZM USRSTV## ;CLEAR STATUS-VALUE
SETZM ERRADR## ;CLEAR ERROR ADDRESS
SKIPN RMSSEC## ;[300] Is this extended addressing?
JRST RMSEN1 ;[300] No, don't worry about this.
MOVE T2,RETPC+1 ;[300] Get PC just incase it is
HLLZM T2,USRSEC## ;[300] Store user's section for this call.
TLNN T1,-1 ;[300] Is user's control block in sec 0?
HLL T1,T2 ;[300] Yes, default to JSYS call section.
HLLZM T1,BLKSEC## ;[300] Remember section where his block is.
RMSEN1: PUSH 17,T1 ;PUSH CONTROL BLOCK addr
PUSH 17,USERAC##+T2 ;[507] PUSH SECOND CONTROL BLOCK addr
; ignored unless $RENAME
MOVE T3,UJSYS## ;GET OFFSET INTO TABLE
MOVE T2,DSPTAB(T3) ;[300] Get address of routine
PUSHJ 17,(T2) ;[300] Dispatch to routine,
;[300] doesn't return.
SUBTTL EXIT CODE
UA%BLK==1 ;?AB ADDRESS ORIG PASSED IN AC1
TRAPERR: ;ABORTIVE ERROR OCCURRED
MOVEI T1,ER$BUG ;RET BUG VAL
MOVEM T1,USRSTV## ; IN 2NDARY STATUS FIELD
MOVE T2,USRSTS## ;IS THERE ANOTHER CODE ALREADY?
CAIN T2,SU$SUC ;JUMP IF YES
MOVEM T1,USRSTS## ;NO, SET AS PRIMARY CODE TOO
JRST USRFOK ;SKIP OABORT CHK
;Here if user calling error (Bad JSYS).
; Have to make sure RMS is setup.
;He gets an error on his TTY, despite $MESSAGE or $NOMESSAGE.
E.JSYS::
SKIPN INTFLG## ;1ST CALL?
JSP T2,RMSINI## ;[300] YES, INIT RMS
MOVEM 17,USERAC##+17 ;SAVE LAST AC
MOVEI 17,USERAC## ;SET UP TO SAVE USER AC'S
BLT 17,USERAC##+16 ;SAVE THEM
MOVE 17,[IOWD PDLNG##,RMSTACK##] ;Setup our own stack.
HRRZ T2,UJSYS## ;Get octal JSYS code
PUSH P,T2
SKIPE RMSSEC## ;In extended section?
JRST [PUSH P,RETPC##+1 ;Yes, save PC
JRST .+2] ;Instead of 1-word one.
PUSH P,RETPC## ;"at" (Octal PC)
PUSH P,[MF$IJC##] ;"?Invalid JSYS code "
PUSHJ P,TX$OUT##
ADJSP P,-3 ;Fix stack after call.
MOVEI T2,ER$BUG ;HALT USER WITH BAD JSYS CODE
MOVEM T2,USRSTS## ;JUST GIVE A STATUS CODE
SETZM USRSTV## ;NO SUBSID CODE
JRST USRFOK ;On return
USRERR:: ;COME HERE ON BAD RETURN FROM RMS
JFCL ;NO-OP, HERE ONLY TO PROVIDE PLACE TO SET BRK-PT
USRRET:: ;COME HERE ON GOOD RETURN FROM ALL RMS MACRO'S
SKIPN OAFLAGS## ;OPEN LEFT HANGING?
JRST USRFOK ;No
PUSH P,[0] ;Tell OABORT USRSTS already set, so ret in line
PUSHJ P,OABORT## ;Clean-up after error.
ADJSP P,-1 ;Fix stack after call.
USRFOK: ;FILE ENVIR GUARAN OK BY HERE
IFN TOP$20,< ;a572
;[450]
;[450] Restore user's page-creation trapping state
;[450]
SKIPN INTMSK## ;[450] Was user trapping?
JRST NONXP2 ;[450] No - don't reset anything
MOVEI T1,.FHSLF ;[450] Turn trapping on again
MOVE T2,[EXP 1B22] ;[450] ...
AIC% ;[450] ...
ERJMP MONERR## ;[450] ...
NONXP2:
> ;End of IFN TOP$20 ;a572
MOVE UA%BLK,USERAC##+UA%BLK ;[450][301] User's AC
TLNN UA%BLK,-1 ;[300] Local sec # (LH zero)?
IOR UA%BLK,BLKSEC## ;[300] Yes, get whole address.
MOVE T2,USRSTV## ;[4] GET STATUS VALUE
$STORE T2,STV,(UA%BLK) ;[4] STORE IT IN CONTROL BLOCK
HRRZ T2,USRSTS## ;GET THE USER'S ERROR CODE
$STORE T2,STS,(UA%BLK) ;STORE IT IN CONTROL BLOCK
IFN TOP$10,<
SETOM USERAC ;[572] Indicate success
>
CAIGE T2,.ERBAS ;IS IT AN ERROR CODE(.GEQ. 300000?)
JRST RETILN ;[301] No, just return in-line
IFN TOP$10,<
SETZM USERAC ;[572] Indicate failure
>
SKIPE RMSSEC## ;[300] In Non-zero section?
SKIPA T4,RETPC+1 ;[300] Yes, get PC
MOVE T4,RETPC ;[300] GET ADDRESS TO RETURN TO
MOVE T3,(T4) ;[300] GET INSTRUCTION THERE
AND T3,[777740,,0] ;[301] Check only opcode and AC field
CAMN T3,[JUMP 16,] ;[3] IS IT AN ERJMP?
JRST DOJMP ;YES, "GOTO" ERROR ADDRESS
CAME T3,[JUMP 17,] ;[3] IS IT ERCAL?
JRST RETILN ;[3] No, illegal call (Didn't use RMS macro).
;[3] So just return in-line.
MOVE T1,USERAC+17 ;[301] Fetch user's pushdown ptr.
SKIPN RMSSEC## ;[300] Skip if extended addressing
JRST DOCALN ;[300] Non-extended, easy.
;Have to simulate PUSHJ in extended addressing. Be careful of
; the user's local stack ptr.
MOVE T4,RETPC+1 ;[300] Get return PC
JUMPGE T1,DOCLN1 ;[300] Global stack, ok
PUSH P,USRSEC ;[300] Remember user's section #
EXCH T1,USRSEC ;[300] Get user's section #
HRR T1,USRSEC ;[300] Make global PDP
ADDI T4,1 ;[300] This will be put on user's stack
PUSH T1,T4 ;[300] Simulate PUSHJ
MOVE T1,USRSEC ;[300] Re-fetch user's PDP
ADJSP T1,1 ;[300] Fix it.
MOVEM T1,USERAC+17 ;[301] Save updated pushdown ptr.
POP P,USRSEC ;[300] Restore user's section #
JRST DOJMP ;[300] and return.
DOCALN: MOVE T4,RETPC ;[3] Get return PC
DOCLN1: ADDI T4,1 ;SIMULATE PUSHJ AT LOCATION OF ERCAL
PUSH T1,T4 ;...BY PUSHING @RETPC+1 ON STACK
MOVEM T1,USERAC+17 ;[301] Save updated pushdown ptr.
; JRST DOJMP ;[301] and return.
;Do EACALC and return to where user told us.
; If not extended addressing, then we don't need to do an
;Effective address calcalation, because the section number will
;always be zero. Instead, just take the ERJMP instruction and
;make the opcode a JRST and the ac field be zero. Then XCT it after
;restoring the user's AC's.
DOJMP: SKIPE RMSSEC## ;[301] Extended addressing is hard.
JRST DOJMPE ;[301] Hard EACALC.
MOVE T3,RETPC ;[301] Get place where ERJMP/CAL is.
MOVE T3,(T3) ;[301] Get instruction
TLZ T3,777740 ;[301] Turn off opcode, AC field
IOR T3,[JRST] ;[301] Make unconditional jump
MOVEM T3,USRSEC ;[301] Store here a sec..
MOVSI 17,USERAC## ;restore user AC's
BLT 17,17
HRRZ 2,USRSTS ;[301] Setup user status. Note - the original
;[301] AC2 has been smashed.. it can't be used
;[301] for indexing in the ERJMP/ERCAL.
XCT USRSEC ;[301] Jump to desired location.
;Extended addressing EACALC
DOJMPE: MOVE T3,RETPC+1 ;[301] Get place where ERJMP is
MOVE T3,(T3) ;[301] Fetch instruction.
MOVE T2,USRSEC ;[301] Current EACALC section is user's section
HRR T2,T3 ;[301] Get "E" if no indirect, indexing
TLNN T3,37 ;[301] Skip if indirect bits on
JRST DOJE ;[301] Got "E"
;Got some indexing or indirection here!
;Here with T3 = next instruction word
; T2 (6:17) = E (6:17)
IWLOOP: HRRZ T4,T3 ;T4 = "Y"
TLNN T3,17 ;Indexing = 0?
JRST IWLUP1 ;No
LDB T1,[POINT 6,T2,17] ;Get register number
MOVE T1,USERAC(T1) ;Get T1=contents of index register
TLNN T2,7777 ;Section # = 0?
JRST IWLUP2 ;Yes, sign doesn't matter
JUMPLE T1,IWLUP2 ;neg or zero, just add RH to Y
TLZ T1,770000 ;Clear junk, get bits 6-35 of index reg.
TLNE T1,-1 ;"Local" indexing used?
HLL T1,T2 ;Yes, use local section number.
ADD T1,T4 ; + Y
MOVE T2,T1 ; = E.
JRST IWCHKI ;go check indirection
;Local (section 0) indexing calculation.
; or Contents of index register is negative.
IWLUP2: HRRZ T1,T1 ;Get RH of index register
ADD T1,T4 ; + Y
HRR T2,T1 ; = E (RH)
JRST IWCHKI ;Go check indirection
IWLUP1: HRR T2,T4 ;Y --> E(RH)
;Here when indexing done (if needed). Do indirection if needed.
IWCHKI: TXNN T3,1B13 ;Indirection?
JRST DOJE ;No, got "E"
INDWLP: MOVE T3,@T2 ;Fetch indirect word from E
ERJMP RETILN ;? EACALC error, return in-line
; (Should really give RMS error as well)
TLNN T2,7777 ;In section 0?
JRST IWLOOP ;Yes, only instruction formats used.
TXNN T3,1B0 ;Global indirect bit on?
JRST INDWL1 ;Yes
TXNN T3,1B1 ;Yes, 10?
JRST IWLOOP ;Yes, local indirect - instruction format
JRST RETILN ;11 = error ("Page fail trap").
INDWL1: MOVE T4,T3 ;Get T4= "Y"
TLZ T4,770000
LDB T1,[POINT 4,T3,5] ;Index register number
JUMPN T1,INDWL2 ;Jump if global indexing
MOVE T2,T4 ;Y--> E
JRST INDWL3 ;Check global indirection as well..
INDWL2: MOVE T1,USERAC(T1) ;Get contents of index register
TLZ T1,770000 ;Delete junk bits
ADD T1,T4 ;XR + Y
MOVE T2,T1 ; = E
INDWL3: TXNE T3,1B1 ;Global indirection?
JRST INDWLP ;Yes, chain to next word.
;Here when got final "E" in T2.
DOJE: MOVE 0,T2 ;Put "E" in T0
EXCH 0,USERAC## ;Restore user ac 0
MOVE 17,[USERAC+1,,1]
BLT 17,17 ;Restore user ac's
HRRZ 2,USRSTS ;Return RMS status in AC 2
JRST @USERAC ;[3] Transfer to user routine.
;Here to return in-line (through return PC)
RETILN: MOVSI 17,USERAC## ;RESTORE USER AC'S
BLT 17,17 ;...
HRRZ 2,USRSTS ;Return RMS status in AC 2
SKIPE RMSSEC ;[300] In extended addressing?
XJRSTF RETPC ;[300] Yes, return via XJRSTF
JRST @RETPC ;[3] Return.
NOVALRET:: ;USE THIS INSTEAD OF USRRET IF NO BLOCK ($DEBUG, $MESSAGE)
SKIPN INTMSK## ;[571] Was user trapping?
JRST RETILN ;[571] No - don't reset anything
MOVEI T1,.FHSLF ;[571] Turn trapping on again
MOVE T2,[EXP 1B22] ;[571] ...
AIC% ;[571] ...
ERJMP MONERR## ;[571] ...
JRST RETILN ;[571]
$ENDMAIN
$ENDSCOPE(TOP-LEVEL)
SUBTTL RMS DISPATCH TABLE
DEFINE RMSVRB(NAME)<$'NAME##> ;;FOR PUSHJ INDIRECT TO ACTUAL PROCESSING IN RMS
; New verbs added ;a501
DSPTAB::
RMSVRB (OPEN)
RMSVRB (CLOSE)
RMSVRB (GET)
RMSVRB (PUT)
RMSVRB (UPDATE)
RMSVRB (DELETE)
RMSVRB (FIND)
RMSVRB (TRUNCATE)
RMSVRB (CONNECT)
RMSVRB (DISCONNECT)
RMSVRB (CREATE)
RMSVRB (DEBUG)
RMSVRB (RELEASE)
RMSVRB (FLUSH)
RMSVRB (MESSAGE)
RMSVRB (NOMESSAGE)
RMSVRB (DISPLAY)
RMSVRB (ERASE)
RMSVRB (FREE)
RMSVRB (UTLINT)
RMSVRB (NXTVOL)
RMSVRB (REWIND)
RMSVRB (WAIT)
RMSVRB (READ)
RMSVRB (SPACE)
RMSVRB (WRITE)
RMSVRB (PARSE)
RMSVRB (SEARCH)
RMSVRB (ENTER)
RMSVRB (EXTEND)
RMSVRB (REMOVE)
RMSVRB (RENAME)
END