Trailing-Edge
-
PDP-10 Archives
-
BB-JR93N-BB_1990
-
10,7/galaxy/operat/oprcmd.mac
There are 40 other files named oprcmd.mac in the archive. Click here to see a list.
TITLE OPRCMD - command tables for ORION
SUBTTL Murry Berkowitz/BH/DC/AWC/PJT/CTK/LWS 12-SEP-85
;
;
;
;COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1975,1976,1977,1978,1979
;1980,1981,1982,1983,1984,1986,1987. ALL RIGHTS RESERVED.
;
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED
; AND COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE
; AND WITH THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS
; SOFTWARE OR ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR
; OTHERWISE MADE AVAILABLE TO ANY OTHER PERSON. NO TITLE TO
; AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE
; WITHOUT NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT
; BY DIGITAL EQUIPMENT CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY
; OF ITS SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY
; DIGITAL.
SALL
SEARCH GLXMAC
SEARCH ORNMAC
PROLOG(OPRCMD)
OPRVRS==:OPRVRS ;REFERENCE BOTH OPR/ORION'S
%%.OPR==:%%.OPR ;AND ORNMAC'S VERSIONS
.DIRECTIVE FLBLST
INTERN OPRCMD ;MAKE VECTOR ADDRESS AVAILABLE
OPRCMD: EXP 2 ;SIZE
EXP INITCM ;POINTER TO THE INI FUNCTION
EXP CMDFDB ;TOP LEVEL DISPATCH
SUBTTL Table of Contents
; TABLE OF CONTENTS FOR OPRCMD
;
;
; SECTION PAGE
; 1. Table of Contents......................................... 2
; 2. Revision History.......................................... 3
; 3. Special Macro Definitions................................. 4
; 4. $UNIT Macro............................................... 4
; 5. $STNUM Macro.............................................. 4
; 6. $STREAM Macro............................................. 4
; 7. $EXPL Macro Definition.................................... 5
; 8. $JOBSWI Macro Definition.................................. 5
; 9. $URANGE Macro Definition.................................. 6
; 10. $SRANGE Macro Definition.................................. 6
; 11. Subroutine macros......................................... 7
; 12. Command Dispatch.......................................... 8
; 13. Argument Subroutines...................................... 9
; 14. START command tables...................................... 10
; 15. CONTINUE command tables................................... 11
; 16. SHUTDOWN command tables................................... 11
; 17. STOP command tables....................................... 12
; 18. ABORT command tables...................................... 13
; 19. HOLD command tables....................................... 14
; 20. RELEASE command tables.................................... 14
; 21. DEFINE command tables..................................... 15
; 22. CANCEL command tables..................................... 16
; 23. MODIFY command tables..................................... 17
; 24. SHOW command tables....................................... 18
; 25. SHOW STATUS command tables................................ 19
; 26. SHOW SYSTEM-LIST command tables........................... 20
; 27. LOCK/UNLOCK command tables................................ 21
; 28. SHWNOD SHOW STATUS/PARAMETERS FOR NODE................... 22
; 29. RESPOND command tables.................................... 23
; 30. REQUEUE command tables.................................... 24
; 31. BACKSPACE command tables.................................. 25
; 32. FORWARDSPACE command tables............................... 25
; 33. ALIGN command table....................................... 26
; 34. SUPPRESS command tables................................... 27
; 35. ROUTE command tables...................................... 28
; 36. SEND command tables....................................... 29
; 37. SET command tables........................................ 30
; 38. SET TAPE and DISK command tables (TOPS20)................. 31
; 39. SET ONLINE command tables................................. 32
; 40. SET USAGE command tables.................................. 33
; 41. SET TAPE INITIALIZE command tables........................ 34
; 42. SET NODE command tables................................... 35
; 43. SET SCHEDULER command tables (TOPS20)..................... 36
; 44. ENABLE command tables..................................... 37
; 45. DISABLE command tables.................................... 37
; 46. ENACLS ENABLE CLASS SCHEDULER command tables............. 38
; 47. CLOSE command tables...................................... 39
; 48. DEFINE command tables..................................... 39
; 49. REPORT command tables..................................... 40
; 50. MOUNT command tables (TOPS10)............................. 41
; 51. IDENTIFY command tables................................... 42
; 52. SWITCH command tables (TOPS20)........................... 43
; 53. DISMOUNT command tables................................... 44
; 54. UNLOAD command tables (removed).......................... 44
; 55. RECOGNIZE command tables.................................. 44
; 56. PUSH command tables....................................... 45
; 57. HELP command tables....................................... 46
; 58. SHOW ALLOCATION command tables............................ 47
SUBTTL Special Macro Definitions
SUBTTL $UNIT Macro
SUBTTL $STNUM Macro
SUBTTL $STREAM Macro
; !=======================================================!
; ! $UNIT (NEXT_PDB) !
; !-------------------------------------------------------!
; ! PARSE A UNIT NUMBER ONLY !
; !=======================================================!
;DEFINE A MACRO TO DO THE PARSING FOR A SINGLE UNIT NUMBER
DEFINE $UNIT(NEXT,%UNI01,%UNI02),<
.XCREF %UNI01,%UNI02
SUPPRESS %UNI01,%UNI02
$NOISE (%UNI01,<unit number>)
%UNI01: $NUMBER (%UNI02,^D10,<unit number (/NODE:)>,<$ACTION(CHKVAL)>)
%UNI02: $NODE(NEXT)
> ;END $UNIT DEFINITION
; !=======================================================!
; ! $STNUM (NEXT_PDB) !
; !-------------------------------------------------------!
; ! PARSE A STREAM NUMBER ONLY !
; !=======================================================!
;DEFINE A MACRO TO DO THE PARSING FOR A SINGLE STREAM NUMBER
;WITHOUT AN OPTIONAL NODE SPECIFICATION
DEFINE $STNUM(NEXT,%STN01),<
.XCREF %STN01
SUPPRESS %STN01
$NOISE (%STN01,<stream number>)
%STN01: $NUMBER (NEXT,^D10,<stream number>,$ACTION(CHKVAL))
> ;END $STNUM DEFINITION
; !=======================================================!
; ! $STREAM (NEXT_PDB) !
; !-------------------------------------------------------!
; ! PARSE A STREAM WITH OPTIONAL NODE !
; !=======================================================!
;DEFINE A MACRO TO DO THE PARSING FOR A SINGLE STREAM NUMBER
DEFINE $STREAM(NEXT,%STR01,%STR02),<
.XCREF %STR01,%STR02
SUPPRESS %STR01,%STR02
$NOISE (%STR01,<stream number>)
%STR01: $NUMBER (%STR02,^D10,<stream number (/NODE:)>,$ACTION(CHKVAL))
%STR02: $NODE(NEXT)
> ;END $STREAM DEFINITION
SUBTTL $EXPL Macro Definition
; !=======================================================!
; ! $EXPL (NEXT_PDB,<KEYWORD-LIST>) !
; !-------------------------------------------------------!
; ! /REASON:TEXT !
; !=======================================================!
;DEFINE A <EXPL> DEFINITION MACRO
DEFINE $EXPL (NXTLNK,ALTADR,%A,%B,%C)<
.XCREF %A,%B,%C
SUPPRESS %A,%B,%C
$SWITCH(%B,%A,ALTADR)
%A: $STAB
ORNSWI (<REASON:>,RSN)
$ETAB
%B: $CRLF (<$ALTER(%C),$ACTION(TXTLIN##),$HELP(<confirm for multiple line response>)>)
%C: $CTEXT (CONFRM,<single line response>)
>
SUBTTL $URANGE Macro Definition
SUBTTL $SRANGE Macro Definition
; !=======================================================!
; ! $URANGE (NEXT_PDB) !
; !-------------------------------------------------------!
; ! PARSE A UNIT RANGE WITH OPTIONAL NODE !
; !=======================================================!
;DEFINE A MACRO TO DO THE PARSING FOR A RANGE OF UNIT NUMBERS
DEFINE $URANGE(NEXT,%URG01,%URG02),<
.XCREF %URG01,%URG02
SUPPRESS %URG01,%URG02
$NOISE (%URG01,<unit number>)
%URG01: $RANGE(%URG02,<number or range (n:m)(/NODE:)>)
%URG02: $NODE(NEXT)
> ;END $URANGE DEFINITION
; !=======================================================!
; ! $SRANGE (NEXT_PDB) !
; !-------------------------------------------------------!
; ! PARSE A STREAM RANGE WITH OPTIONAL NODE !
; !=======================================================!
;DEFINE A MACRO TO DO THE PARSING FOR A RANGE OF STREAM NUMBERS
DEFINE $SRANGE(NEXT,%SRG01,%SRG02),<
.XCREF %SRG01,%SRG02
SUPPRESS %SRG01,%SRG02
$NOISE (%SRG01,<stream number>)
%SRG01: $RANGE(%SRG02,<number or range (n:m)(/NODE:)>)
%SRG02: $NODE(NEXT)
> ;END $SRANGE DEFINITION
SUBTTL Subroutine macros
;DEFINE A MACRO TO ACTUALLY PARSE A RANGE OF OCTAL NUMBERS SPECIFIED AS
; NUMBER:NUMBER (OR JUST NUMBER) WITH AN OPTIONAL NODE SWITCH
DEFINE $RANGE(NEXT,HLPT,ARGLST,%RNG01,%RNG02),<
.XCREF %RNG01,%RNG02
SUPPRESS %RNG01,%RNG02
$NUMBER (%RNG01,^D10,HLPT,<$ACTION(STOBTH),ARGLST>)
%RNG01: $TOKEN (%RNG02,<:>,<$HELP(<colon to specify a range>),$ALTERNATE(NEXT)>)
%RNG02: $NUMBER (NEXT,^D10,,<$ACTION(STOHGH)>)
> ;END DEFINITION OF $RANGE
;DEFINE A MACRO FOR CORRECT PARSING OF THE OPTIONAL /NODE SWITCH
DEFINE $NODE(NEXT,%NOD01,%NOD02),<
.XCREF %NOD01,%NOD02
SUPPRESS %NOD01,%NOD02
$SWITCH (%NOD02,%NOD01,<$ALTERNATE(NEXT)>)
%NOD01: $STAB
ORNSWI(NODE:,NOD)
$ETAB
%NOD02: $NODNM (NEXT,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
> ;END $NODE DEFINITION
SUBTTL Command Dispatch
INITCM:: $INIT(CMDFDB)
CMDFDB:: $KEYDSP(CMDTAB,<$ACTION(CMDACT##),$ERROR(BADCOM)>)
CMDTAB: $STAB
TOPS10< ORNDSP(,\"32,CTZ,CM%INV) >
ORNDSP(ABOFDB,ABORT,CNC)
ORNDSP(ALIFDB,ALIGN,ALI)
ORNDSP(BKSFDB,BACKSPACE,BKS)
ORNDSP(CANFDB,CANCEL,DEL)
ORNDSP(CLOFDB,CLOSE,CLO)
ORNDSP(UNVFDB,CONTINUE,CNT)
IFN FTDN60,<
ORNDSP(DEFFDB,DEFINE,DEF) >
IFE FTDN60,<
TOPS10< ORNDSP(DEFFDB,DEFINE,DEF) > >
ORNDSP(ENAFDB,DISABLE,DIS)
ORNDSP(DSMFDB,DISMOUNT,DSM)
ORNDSP(ENAFDB,ENABLE,ENA)
IFN NUMAPL,< ;CHECK IS ANY APPLICATION TABLES
ORNDSP(ENTFDB##,ENTER,ENT)
>;END NUMAPL
ORNDSP(EXTFDB##,EXIT,EXT)
ORNDSP(BKSFDB,FORWARDSPACE,FWS)
ORNDSP(HLPFDB,HELP,HLP)
ORNDSP(HLDFDB,HOLD,HLD)
ORNDSP(IDNFDB,IDENTIFY,IDN)
TOPS10< ORNDSP(LOCFDB,LOCK,LOC)>
ORNDSP(MODFDB,MODIFY,MOD)
TOPS10< ORNDSP(MTNFDB,MOUNT,MTN) >
ORNDSP(NXTFDB,NEXT,NXT) ;[NXT] Operator NEXT command
ORNDSP(PUSFDB,PUSH,PUS)
TOPS10< ORNDSP(RECFDB,RECOGNIZE,REC)>
ORNDSP(HLDFDB,RELEASE,REL)
ORNDSP(RPTFDB,REPORT,RPT)
ORNDSP(REQFDB,REQUEUE,REQ)
ORNDSP(RSPFDB,RESPOND,RSP)
TOPS10< ORNDSP(RSTFDB,RESTRICT,RST)>
ORNDSP(RTEFDB,ROUTE,RTE)
ORNDSP(SNDFDB,SEND,SND)
ORNDSP(SETFDB,SET,SET)
ORNDSP(SHWFDB,SHOW,SHW)
ORNDSP(SHDFDB,SHUTDOWN,SHD)
ORNDSP(STAFDB,START,STA)
ORNDSP(STPFDB,STOP,PAU)
ORNDSP(SUPFDB,SUPPRESS,SUP)
TOPS20< ORNDSP(SWIFDB,SWITCH,SWI)>
ORNDSP(TAKOPR##,TAKE,TAK)
TOPS10< ORNDSP(ULCFDB,UNLOCK,ULC)>
; ORNDSP(UNLFDB,UNLOAD,UNL)
TOPS10< ORNDSP(RSTFDB,UNRESTRICT,URS)>
ORNDSP(WAIOPR##,WAIT,WAI)
$ETAB
BADCOM::MOVEI S2,[ASCIZ/Invalid OPR command specified/]
$RETF ;BAD COMMAND
SUBTTL Argument Subroutines
;ACTION ROUTINE CALLED ON $UNIT MACRO TO BARF ON NEGATIVE UNIT
;NUMBER ARGUMENTS.
CHKVAL: SKIPL CR.RES(S2) ;CHECK THAT NUMBER
$RETT ;IT'S GOOD
PUSHJ P,P$FIXP##
MOVEI S2,[ASCIZ/Negative number improper/]
$RETF
CHKPOS: SKIPLE CR.RES(S2) ;CHECK THE NUMBER
$RETT ;O.K..RETURN
PUSHJ P,P$FIXP## ;FIXUP COMMAND
MOVEI S2,[ASCIZ/Number must be positive/]
$RETF ;RETURN FALSE
; ACTION ROUTINE TO CHECK PRIORITY RANGES
CHKPRI: SKIPLE T1,CR.RES(S2) ;CHECK THAT NUMBER
CAILE T1,^D63
SKIPA
$RETT ;IT'S GOOD
PUSHJ P,P$FIXP##
MOVEI S2,[ASCIZ/Priority not in range/]
$RETF
;TEMPORARY STORAGE FOR RANGE ARGUMENT
$DATA LSTARG,1 ;LAST PARSED ARGUMENT ADDRESS
$GDATA CMDCOD,1 ;COMMAND FUNCTION CODE
STOBTH: SKIPGE T1,CR.RES(S2)
PJRST CHKVAL ;ABORT COMMAND
MOVEM T1,LSTARG
$RETT
STOHGH: SKIPGE T1,CR.RES(S2)
PJRST CHKVAL ;ABORT COMMAND
CAMGE T1,LSTARG
SKIPA ;SKIP AND LOAD ERROR
$RETT
PUSHJ P,P$FIXP##
MOVEI S2,[ASCIZ /Improper range specification/]
$RETF
SUBTTL START command tables
STAFDB: $NOISE (STAF01,<object>)
STAF01: $KEYDSP(STAF02)
STAF02: $STAB
ORNDSP(STAF03,BATCH-STREAM,BAT)
ORNDSP(STAF04,<CARD-PUNCH>,CDP)
ORNDSP(STAF05,<FAL-STREAM>,FAL)
IFN FTFTS,<
ORNDSP(STAF03,<FTS-STREAM>,FTS)
> ;End FTFTS conditional
ORNDSP(SHD030,<NODE>,NOD)
ORNDSP(STAF03,<NQC-STREAM>,NQC)
ORNDSP(STAF04,<PAPER-TAPE-PUNCH>,PTP)
ORNDSP(STAF04,<PLOTTER>,PLT)
ORNDSP(STAF11,PRINTER,LPT)
ORNDSP(STAF04,READER,RDR)
$ETAB
STAF03: $SRANGE(CONFRM)
STAF04: $URANGE (CONFRM)
STAF05: $RANGE(CONFRM,<stream number or range (n:m)>)
STAF11: $URANGE(STAF12)
STAF12: $SWITCH (STAF14,STAF13,<$ALTERNATE(<CONFRM>)>)
STAF13: $STAB
ORNSWI (<DEVICE:>,DEV)
$ETAB
STAF14: $DEV(CONFRM,<$HELP(<device name>),$FLAGS(CM%NSF)>)
SUBTTL CONTINUE command tables
SUBTTL SHUTDOWN command tables
COMMENT \
NOTE: SHOULD IT BECOME DESIRABLE FOR THE SHUTDOWN AND
CONTINUE COMMANDS TO BE NO LONGER SYNTACTICALLY IDENTICAL THEN THE
COMMON USE OF THIS PDB CHAIN DEFINITION IS NO LONGER VALID.
\
SHDFDB: $NOISE (SHD010,<scheduling for>)
UNVFDB: $NOISE (UNVF01,<object>)
UNVF01: $KEYDSP(UNVF02)
UNVF02: $STAB
ORNDSP(UNVF03,BATCH-STREAM,BAT)
ORNDSP(UNVF04,<CARD-PUNCH>,CDP)
ORNDSP(STAF05,<FAL-STREAM>,FAL)
IFN FTFTS,<
ORNDSP(UNVF03,<FTS-STREAM>,FTS)
> ;End FTFTS conditional
ORNDSP(UNVF03,<NQC-STREAM>,NQC)
ORNDSP(UNVF04,<PAPER-TAPE-PUNCH>,PTP)
ORNDSP(UNVF04,<PLOTTER>,PLT)
ORNDSP(UNVF04,PRINTER,LPT)
ORNDSP(UNVF04,READER,RDR)
$ETAB
UNVF03: $SRANGE(CONFRM)
UNVF04: $URANGE(CONFRM)
CONFRM::$CRLF
SHD010: $KEYDSP(SHD020)
SHD020: $STAB
ORNDSP(UNVF03,BATCH-STREAM,BAT)
ORNDSP(UNVF04,<CARD-PUNCH>,CDP)
ORNDSP(STAF05,<FAL-STREAM>,FAL)
ORNDSP(SHD030,NODE,NOD)
ORNDSP(UNVF03,<NQC-STREAM>,NQC)
ORNDSP(UNVF04,<PAPER-TAPE-PUNCH>,PTP)
ORNDSP(UNVF04,<PLOTTER>,PLT)
ORNDSP(UNVF04,PRINTER,LPT)
ORNDSP(UNVF04,READER,RDR)
$ETAB
SHD030: $NODNM(CONFRM,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
SUBTTL STOP command tables
STPFDB: $NOISE (STPF01,<object>)
STPF01: $KEYDSP(STPF02)
STPF02: $STAB
ORNDSP(STPS01,BATCH-STREAM,BAT)
ORNDSP(STPU01,<CARD-PUNCH>,CDP)
ORNDSP(STPS05,<FAL-STREAM>,FAL)
IFN FTFTS,<
ORNDSP(STPU01,<FTS-STREAM>,FTS)
> ;End FTFTS conditional
ORNDSP(STPS01,<NQC-STREAM>,NQC)
ORNDSP(STPU01,<PAPER-TAPE-PUNCH>,PTP)
ORNDSP(STPU01,<PLOTTER>,PLT)
ORNDSP(STPU01,PRINTER,LPT)
ORNDSP(STPU01,READER,RDR)
$ETAB
STPS01: $NOISE (STPN01,<stream number>)
STPU01: $NOISE (STPN01,<unit number>)
STPS05: $RANGE (STP010,<stream number or range (n:m)>)
STPN01: $NUMBER (STPN02,^D10,<number or range (n:m)(/NODE:)>,<$ACTION(STOBTH)>)
STPN02: $TOKEN (STPN03,<:>,<$HELP(<colon to specify a range>),$DEFAULT(IMMEDIATELY),$ALTERNATE(STPN04)>)
STPN03: $NUMBER (STPN04,^D10,,<$ACTION(STOHGH)>)
STPN04: $SWITCH (STPN06,STPN05,<$ALTERNATE(STP010)>)
STPN05: $STAB
ORNSWI(NODE:,NOD)
$ETAB
STPN06: $NODNM (STP010,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
STP010: $KEYDSP (STP020,<$DEFAULT(<IMMEDIATELY>),$ALTERNATE(CONFRM)>)
STP020: $STAB
ORNDSP(STP030,<AFTER>,AFT)
ORNDSP(CONFRM,<IMMEDIATELY>,IMM)
$ETAB
STP030: $KEY(CONFRM,STP040)
STP040: $STAB
ORNKEY(<CURRENT-REQUEST>,ACR)
ORNKEY(<EVERY-REQUEST>,AER)
$ETAB
SUBTTL ABORT command tables
ABOFDB: $NOISE (ABO010,<current job on>)
ABO010: $KEYDSP (ABO020)
ABO020: $STAB
ORNDSP (ABO060,<BATCH-STREAM>,BAT)
ORNDSP (ABO030,<CARD-PUNCH>,CDP)
ORNDSP (ABO200,<FAL-STREAM>,FAL)
IFN FTFTS,<
ORNDSP (ABO060,<FTS-STREAM>,FTS)
> ;End FTFTS conditional
ORNDSP (ABO030,<NQC-STREAM>,NQC)
ORNDSP (ABO030,<PAPER-TAPE-PUNCH>,PTP)
ORNDSP (ABO030,<PLOTTER>,PLT)
ORNDSP (ABO030,<PRINTER>,LPT)
ORNDSP (ABO090,<READER>,RDR)
$ETAB
; Output device tables
;
ABO030: $UNIT (ABO040)
ABO040: $SWITCH (ABO100,ABO050,<$ALTERNATE(ABO100)>)
ABO050: $STAB
ORNSWI (<PURGE>,PUR)
$ETAB
; Batch tables
;
ABO060: $STREAM (ABO070)
ABO070: $SWITCH (ABO100,ABO080,<$ALTERNATE(ABO100),$DEFAULT(</ERROR-PROCESSING>)>)
ABO080: $STAB
ORNSWI (<ERROR-PROCESSING>,ERR)
ORNSWI (<NOERROR-PROCESSING>,NER)
ORNSWI (<PURGE>,PUR)
$ETAB
; Card reader tables
;
ABO090: $UNIT (ABO100)
; FAL stream tables
;
ABO200: $NOISE (ABO210,<stream number>)
ABO210: $NUMBER (ABO070,^D10,<stream number>,$ACTION(CHKVAL))
ABO100: $EXPL (CONFRM,<$ALTER(CONFRM)>)
SUBTTL HOLD command tables
SUBTTL RELEASE command tables
HLDFDB: $KEY (HLD030,HLD010)
HLD010: $STAB
ORNKEY (<BATCH-JOBS>,BAT)
ORNKEY (<CARD-PUNCH-JOBS>,CDP)
IFN FTFTS,<
ORNKEY (<FTS-JOBS>,FTS)
> ;End FTFTS conditional
ORNKEY (<PAPER-TAPE-PUNCH-JOBS>,PTP)
ORNKEY (<PLOTTER-JOBS>,PLT)
ORNKEY (<PRINTER-JOBS>,LPT)
$ETAB
HLD030: $NUMBER(CONFRM,^D10,<request-id>,<$ACTION(CHKPOS),$ALTERNATE(HLD035)>)
HLD035: $USER(CONFRM,<$ALTERNATE(HLD040)>)
HLD040: $TOKEN(HLD050,<*>,<$HELP(<* to specify all requests>)>)
HLD050: $NODE(CONFRM)
SUBTTL DEFINE command tables
TOPS20<
IFN FTDN60,<
DEFFDB: $KEY(DEF020,DEF010,<$DEFAULT(<NODE>)>)
DEF010: $STAB
ORNKEY(<NODE>,NOD)
$ETAB
> > ;END IFN FTDN60, TOPS20
TOPS10<
DEFFDB: $KEYDSP(DEF010)
DEF010: $STAB
ORNDSP(DEF200,<FILE-ACCESS>,FAL)
ORNDSP(DEF400,<NETWORK-QUEUE>,QNM)
ORNDSP(DEF020,<NODE>,NOD) >
$ETAB
DEF020: $NOISE(DEF030,<name>)
DEF030: $NODNM(DEF040,<node name>,<$FLAGS(CM%NSF!CM%PO)>)
DEF040: $NOISE(DEF050,<type>)
IFN FTDN60,<
DEF050: $KEYDSP(DEF060,<$DEFAULT(<HASP>)>) >
IFE FTDN60,<
DEF050: $KEYDSP(DEF060,<$DEFAULT(<SERVER>)>) >
DEF060: $STAB
IFN FTDN60,<
ORNDSP(DEF063,<2780>,278)
ORNDSP(DEF063,<3780>,378)
ORNDSP(DEF063,<HASP>,HSP)
>; END IFN FTDN60
ORNDSP(DEFL00,<LAT-SERVER>,LAT)
ORNDSP(CONFRM,<SERVER>,SRV)
$ETAB
IFN FTDN60,<
DEF063: $SWITCH (DEF070,DEF065,<$ALTERNATE(DEF080),$DEFAULT(</SIGNON-REQUIRED>)>)
DEF065: $STAB
ORNSWI(<NO-SIGNON-REQUIRED>,NSN)
ORNSWI(<SIGNON-REQUIRED>,SON)
$ETAB
DEF070: $NOISE(DEF080,<mode>)
DEF080: $KEY(DEF100,DEF090,<$DEFAULT(<TERMINATION>)>)
DEF090: $STAB
ORNKEY(EMULATION,EMU)
ORNKEY(TERMINATION,TRM)
$ETAB
DEF100: $KEYDSP(DEF101,<$ALTER(DEF110)>)
DEF101: $STAB
ORNDSP(DEF140,<CPU>,CPU)
$ETAB
DEF109: $NOISE(DEF110,<port>)
DEF110: $NUMBER(DEF120,^D8,<port number for DN60>)
DEF120: $NOISE(DEF130,<line>)
DEF130: $NUMBER(CONFRM,^D8,<line number for DN60>)
DEF140: $NUMBER(DEF150,^D8,<cpu number>)
DEF150: $KEY(DEF160,DEF155,$DEFAULT(<DTE>))
DEF155: $STAB
ORNKEY(<DL10-PORT>,D10)
ORNKEY(<DTE>,D20)
$ETAB
DEF160: $NUMBER(DEF170,^D8,<port number for DL10 or DTE>)
DEF170: $KEY(DEF130,DEF175,$DEFAULT(<LINE>))
DEF175: $STAB
ORNKEY(LINE,LIN)
$ETAB
>;END FTDN60
DEFL00: $SWITCH (,DEFL20,<$ALTERNATE(DEFL60),$PREFI(LATINI)>) ;
DEFL10: $SWITCH (,DEFL20,<$ALTERNATE(DEFL60)>) ;
DEFL20: $STAB ;
ORNSDP (DEFL30,<NODE-NAME:>,SVR) ;
ORNSDP (DEFL40,<PORT-NAME:>,POR) ;
ORNSDP (DEFL50,<SERVICE-NAME:>,SVC) ;
$ETAB ;
DEFL30: $FIELD (DEFL10,<Server name>,<$BREAK(LATBRK),$ACTION(CHKSVR)>) ;
DEFL40: $FIELD (DEFL10,<Port name>,<$BREAK(LATBRK),$ACTION(CHKPOR)>) ;
DEFL50: $FIELD (DEFL10,<Service name>,<$BREAK(LATBRK),$ACTION(CHKSVC)>) ;
DEFL60: $CRLF (<$ACTION(CHKLAT)>) ;
LATBRK: 777777,,777760 ;BREAK ON ALL CONTROL
757744,,000760 ;ALLOW $ - . : AND 0-9
400000,,000740 ;ALLOW UC A-Z AND _
400000,,000760 ;ALLOW LC A-Z
$DATA LATSVR,1 ;Flags
$DATA LATPOR,1 ;
$DATA LATSVC,1 ;
LATINI: SETZM LATSVR ;Initialize
SETZM LATPOR ; the
SETZM LATSVC ; flags
$RETT ;
CHKSVR: SETOM LATSVR ;
$CALL CHKLNM ;Check the name
$RETIT ;No errors: return
JUMPL S1,.RETF ;Wrong type: error return
SKIPE S1 ;Is it a null string?
SKIPA S2,[[ASCIZ |Value for /NODE-NAME is too long|]] ;
MOVEI S2,[ASCIZ |Value for /NODE-NAME is too short|] ;
$RETF ;
CHKPOR: SETOM LATPOR ;
$CALL CHKLNM ;Check the name
$RETIT ;No errors: return
JUMPL S1,.RETF ;Wrong type: error return
SKIPE S1 ;Is it a null string?
SKIPA S2,[[ASCIZ |Value for /PORT-NAME is too long|]] ;
MOVEI S2,[ASCIZ |Value for /PORT-NAME is too short|] ;
$RETF ;
CHKSVC: SETOM LATSVC ;
$CALL CHKLNM ;Check the name
$RETIT ;No errors: return
JUMPL S1,.RETF ;Wrong type: error return
SKIPE S1 ;Is it a null string?
SKIPA S2,[[ASCIZ |Value for /SERVICE-NAME is too long|]] ;
MOVEI S2,[ASCIZ |Value for /SERVICE-NAME is too short|] ;
$RETF ;
CHKLNM: $SAVE <T1,T2> ;
MOVE S1,CR.COD(S2) ;Get the function type
CAIE S1,.CMFLD ;Is it an unquoted string?
JRST CHKLN3 ;No, error return
MOVE T1,CR.FLG(S2) ;Get byte pointer
MOVE T1,.CMABP(T1) ; to ASCII text
SETZ T2, ;Initialize character count
CHKLN1: ILDB S1,T1 ;Get the next character
SKIPE S1 ;Is this the end of the string?
AOJA T2,CHKLN1 ;No, keep looking
JUMPE T2,CHKLN2 ;Null string: illegal
CAIG T2,^D16 ;Is it more than 16 bytes long?
$RETT ;No, normal return
CHKLN2: $CALL P$FIXP## ;Fix up the command buffer
MOVE S1,T2 ;Return with the length in bytes
$RETF ;Error return
CHKLN3: SETO S1, ;
MOVEI S2,[ASCIZ |Invalid field type|]
$RETF ;
CHKLAT: SKIPE LATSVR ;Was /NODE-NAME given?
JRST CHKLA1 ;Yes, keep checking
$CALL P$FIXP ;
MOVEI S2,[ASCIZ |Value for /NODE-NAME is required|] ;
$RETF ;
CHKLA1: SKIPN LATSVC ;Was /SERVICE-NAME
SKIPE LATPOR ; or /PORT_NAME given?
$RETT ;Yes, normal return
$CALL P$FIXP ;
MOVEI S2,[ASCIZ |Value for /SERVICE-NAME or /PORT-NAME or both is required|] ;
$RETF ;
TOPS10<
DEF200: $KEYDSP(DEF210)
DEF210: $STAB
ORNDSP(DEF220,<DEFAULT-PPN>,DPP)
ORNDSP(DEF300,<REJECTION-LIST>,REJ)
$ETAB
DEF220: $USER(CONFRM)
DEF300: $NODNM(DEF310,<node name to be rejected>,<$ALTER(DEF320),$FLAGS(CM%PO!CM%NSF)>)
DEF310: $USER(DEF330,<$PDATA(<CM%WLD!WLDPPN>),$ALTER(DEF330)>)
DEF320: $USER(DEF330,$PDATA(<CM%WLD!WLDPPN>))
DEF330: $COMMA(DEF300,$ALTER(<CONFRM>))
$DATA WLDPPN,2
DEF400: $NOISE (DEF410,<name>)
DEF410: $FIELD (DEF420,<queue name>,<$BREAK(QNMBRK),$PREFILL(P$8BIT##)>)
DEF420: $CRLF (<$HELP (<return to delete queue name>),$ALTER (DEF430)>)
DEF430: $KEY (DEF450,DEF440)
DEF440: $STAB
ORNKEY (<LOCAL>,LCL)
ORNKEY (<REMOTE>,RMT)
$ETAB
DEF450: $NOISE (DEF460,<node>)
DEF460: $NODNM (DEF470,<node name>,<$FLAGS(CM%NSF!CM%PO)>)
DEF470: $KEY (DEF490,DEF480)
DEF480: $STAB
ORNKEY (<CARD-PUNCH>,CDP)
ORNKEY (<PAPER-TAPE-PUNCH>,PTP)
ORNKEY (PLOTTER,PLT)
ORNKEY (PRINTER,LPT)
$ETAB
DEF490: $CRLF (<$HELP(<return for any unit>),$ALTER(DEF500)>)
DEF500: $NUMBER (CONFRM,^D10,<unit number>,<$ALTER(DEF510),$ACTION(CHKVAL)>)
DEF510: $FIELD (CONFRM,<unit type or attribute>,)
QNMBRK: 777777,,777760 ;BREAK ON ALL CONTROL
757744,,000760 ;ALLOW $ - . : AND 0-9
400000,,000740 ;ALLOW UC A-Z AND _
400000,,000760 ;ALLOW LC A-Z
> ;END TOPS10
SUBTTL CANCEL command tables
CANFDB: $KEYDSP(CAN010)
CAN010: $STAB
ORNDSP (CAN020,<BATCH-REQUEST>,BAT)
ORNDSP (CAN020,<CARD-PUNCH-REQUEST>,CDP)
ORNDSP (CAN020,<EVENT-REQUEST>,EVT)
IFN FTFTS,<
ORNDSP (CAN020,<FTS-REQUEST>,FTS)
> ;End FTFTS conditional
ORNDSP (CAN040,<MOUNT-REQUEST>,MNT)
ORNDSP (CAN020,<PAPER-TAPE-PUNCH-REQUEST>,PTP)
ORNDSP (CAN020,<PLOTTER-REQUEST>,PLT)
ORNDSP (CAN020,<PRINTER-REQUEST>,LPT)
$ETAB
CAN020: $NUMBER(CONFRM,^D10,<request number to cancel in queue or if active>,<$ACTION(CHKPOS),$ALTERNATE(CAN030)>)
TOPS20 <
CAN030: $USER(CONFRM,<$HELP(<user name whose jobs will be canceled>),$ALTERNATE(HLD040)>)
>;END TOPS20
TOPS10 <
CAN030: $USER(CONFRM,<$HELP(<[project,programmer] whose jobs will be canceled>),$ALTERNATE(HLD040)>)
>;END TOPS10
CAN050: $DEV(CAN060,<$HELP(<structure name to cancel all mount requests for>),$FLAGS(CM%PO!CM%NSF),$ALTERNATE(CAN055)>)
TOPS10<
CAN040: $NUMBER(CAN060,^D10,<mount request number to cancel>,<$ACTION(CHKPOS),$ALTERNATE(CAN050)>)
CAN055: $TOKEN(CAN060,<*>,<$HELP(<* to specify all pending requests>)>)
>
TOPS20<
CAN050: $NUMBER(CAN060,^D10,<mount request number to cancel>,<$ACTION(CHKPOS)>)
>
CAN060: $EXPL(CONFRM,<$ALTERNATE(CONFRM)>)
SUBTTL MODIFY command tables
MODFDB:
$KEYDSP (MOD010)
MOD010: $STAB
TOPS10< ORNDSP (MOD300,<ACTIVE-SWAPPING-LIST>,ASL) >
ORNDSP (MOD020,<BATCH-REQUEST>,BAT)
ORNDSP (MOD020,<CARD-PUNCH-REQUEST>,CDP)
TOPS10< ORNDSP (MOD200,<CRASH-DUMP-LIST>,CDL) >
IFN FTFTS,<
ORNDSP (MOD020,<FTS-REQUEST>,FTS)
> ;End FTFTS conditional
ORNDSP (MOD020,<PAPER-TAPE-PUNCH-REQUEST>,PTP)
ORNDSP (MOD020,<PLOTTER-REQUEST>,PLT)
ORNDSP (MOD020,<PRINTER-REQUEST>,LPT)
TOPS10< ORNDSP (MOD200,<SYSTEM-SEARCH-LIST>,SSL) >
$ETAB
MOD020: $NUMBER(MOD030,^D10,<request number to modify in queue>,<$ACTION(CHKPOS),$ALTERNATE(MOD070)>)
MOD030: $KEYDSP(MOD040)
MOD040: $STAB
ORNDSP(MOD050,<PRIORITY>,PRI)
$ETAB
MOD050: $NOISE(MOD060,<to be>)
MOD060: $NUMBER(CONFRM,^D10,<priority for request in range 1 to 63>,<$ACTION(CHKPRI)>)
MOD070: $USER(MOD030,<$ALTERNATE(MOD080)>)
MOD080: $TOKEN(MOD090,<*>,<$HELP(<* to specify all requests>)>)
MOD090: $NODE(MOD030)
TOPS10<
;More of the MODIFY command tables
;Here if MODIFYing lists pertaining to file structures
MOD200: $NOISE (MOD210,<to>)
MOD210: $KEY (MOD230,MOD220)
MOD220: $STAB
ORNKEY (EXCLUDE,EXC)
ORNKEY (INCLUDE,INC)
$ETAB
MOD230: $DEV (CONFRM,<$HELP(<file structure name>),$FLAGS(CM%NSF)>)
;Here if MODIFYing lists pertaining to disk drives (units)
MOD300: $NOISE (MOD310,<to>)
MOD310: $KEY (MOD320,MOD220)
MOD320: $DEV (CONFRM,<$HELP(<disk unit name>),$FLAGS(CM%NSF)>)
>;END TOPS10
SUBTTL SHOW command tables
SHWFDB: $KEYDSP(SHW010)
SHW010: $STAB
TOPS10< ORNDSP(ALC000,ALLOCATION,ALC) >
ORNDSP(SHW110,<CONTROL-FILE>,CTL)
ORNDSP(SHW020,MESSAGES,MSG)
ORNDSP(CONFRM,<NETWORK-QUEUE-NAMES>,QNM)
ORNDSP(SHW030,OPERATORS,OPR)
ORNDSP(SHW210,PARAMETERS,PRM)
ORNDSP(SHW400,QUEUES,QUE)
ORNDSP(CONFRM,<ROUTE-TABLE>,RTE)
TOPS20< ORNDSP(CONFRM,SCHEDULER,SCH)>
ORNDSP(STS000,STATUS,STS)
TOPS10< ORNDSP(SYS000,<SYSTEM>,SLS) >
ORNDSP(SHW060,TIME,DAY) ;DAYTIME CHANGES TO TIME
$ETAB
SHW020: $NUMBER(CONFRM,^D10,<message number>,<$ALTER(SHW030),$ACTION(CHKVAL)>)
SHW030: $NODE(CONFRM)
SHW060: $CRLF(<$ACTION(SHWDAY##)>)
SHW110: $NOISE (SHW120,<for>)
SHW120: $KEY (SHW140,SHW130,<$DEFAULT(<BATCH-STREAM>)>)
SHW130: $STAB
ORNKEY(<BATCH-STREAM>,BAT)
$ETAB
SHW140: $NOISE (SHW145,<stream number>)
SHW145: $NUMBER (SHW150,^D10,<stream number>,$ACTION(CHKVAL))
SHW150: $SWITCHES(,SHW160,<$ALTER(CONFRM)>)
SHW160: $STAB
ORNSDP (SHW170,<LINES:>,LNS)
$ETAB
SHW170: $NUMBER (CONFRM,^D10,<number of lines>,$ACTION(CHKVAL))
SHW210: $KEYDSP(SHW220,<$ALTER(SHW320)>)
SHW220: $STAB
ORNDSP (SHW230,<BATCH-STREAM>,BAT)
ORNDSP (SHW230,<CARD-PUNCH>,CDP)
ORNDSP (SHW350,<FAL-STREAM>,FAL)
IFN FTFTS,<
ORNDSP (SHW230,<FTS-STREAM>,FTS)
> ;End FTFTS conditional
ORNDSP (SHWNOD,<NETWORK-NODE>,NOD)
ORNDSP (SHW230,<NQC-STREAM>,NQC)
ORNDSP (SHW230,<PAPER-TAPE-PUNCH>,PTP)
ORNDSP (SHW230,<PLOTTER>,PLT)
ORNDSP (SHW230,<PRINTER>,LPT)
$ETAB
SHW230: $SWITCH(SHW260,SHW250,<$ALTERNATE(SHW270)>)
SHW250: $STAB
ORNSWI(<NODE:>,NOD)
$ETAB
SHW260: $NODNM(CONFRM,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
SHW270: $RANGE(SHW280,<number or range (n:m)(/NODE:)>,<$ALTERNATE(CONFRM)>)
SHW280: $NODE(CONFRM)
SHW320: $SWITCH(SHW340,SHW330,<$ALTERNATE(CONFRM)>)
SHW330: $STAB
ORNSWI(<NODE:>,NOD)
$ETAB
SHW340: $NODNM(CONFRM,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
SHW350: $RANGE(CONFRM,<stream number or range (n:m)>,$ALTER(CONFRM))
; Continued on next page
;Continued from previous page
; SHOW QUEUE command
SHW400: $KEYDSP(SHW420,<$DEFAULT(ALL),$ALTER(SHW430)>);NODE OR CONFIRM
SHW420: $STAB
ORNDSP (SHW430,<ALL-JOBS>,ALL)
ORNDSP (SHW430,<BATCH-JOBS>,BAT)
ORNDSP (SHW430,<CARD-PUNCH-JOBS>,CDP)
ORNDSP (SHW430,<EVENTS>,EVT)
IFN FTFTS,<
ORNDSP (SHW430,<FTS-REQUEST>,FTS)
> ;End FTFTS conditional
ORNDSP (SHW470,<MOUNT-REQUESTS>,MNT)
ORNDSP (SHW430,<PAPER-TAPE-PUNCH-JOBS>,PTP)
ORNDSP (SHW430,<PLOTTER-JOBS>,PLT)
ORNDSP (SHW430,<PRINTER-JOBS>,LPT)
TOPS20< ORNDSP (SHW470,<RETRIEVAL-REQUESTS>,RET)>
$ETAB
SHW430: $SWITCH (,SHW440,<$ALTER(CONFRM),$ACTION(SHRSWT)>) ;Switch or confirm
SHW440: $STAB
ORNSDP (NEXT,<ALL>,ALL)
ORNSDP (SHW450,<NODE:>,NOD)
ORNSDP (NEXT,<REMOTE>,RMT)
ORNSDP (NEXT,<SHORT>,SHT)
ORNSDP (NEXT,<SUMMARY>,SUM)
ORNSDP (SHW460,<USER:>,USR)
$ETAB
SHW450: $NODNM (NEXT,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
SHW460: $USER (NEXT)
SHW470: $SWITCH (,SHW480,<$ALTER(CONFRM),$ACTION(SHRSWT)>) ;Switch or confirm
SHW480: $STAB ; But no node allowed!
ORNSDP (NEXT,<ALL>,ALL)
ORNSDP (NEXT,<SHORT>,SHT)
ORNSDP (SHW490,<USER:>,USR)
$ETAB
SHW490: $USER (NEXT)
SUBTTL SHOW STATUS command tables
STS000: $KEYDSP(STS010,<$ALTER(STS100)>)
STS010: $STAB
ORNDSP (STS020,<BATCH-STREAM>,BAT)
ORNDSP (STS020,<CARD-PUNCH>,CDP)
ORNDSP (STS190,<DISK-DRIVE>,DSK)
ORNDSP (STS300,<FAL-STREAM>,FAL)
IFN FTFTS,<
ORNDSP (STS020,<FTS-STREAM>,FTS)
> ;End FTFTS conditional
ORNDSP (SHWNOD,<NETWORK-NODE>,NOD)
ORNDSP (STS020,<NQC-STREAM>,NQC)
ORNDSP (STS020,<PAPER-TAPE-PUNCH>,PTP)
ORNDSP (STS020,<PLOTTER>,PLT)
ORNDSP (STS020,<PRINTER>,LPT)
ORNDSP (STS020,<READER>,RDR)
TOPS10< ORNDSP (STS250,<STRUCTURE>,STR)>
ORNDSP (STS160,<TAPE-DRIVE>,TAP)
$ETAB
STS020: $SWITCH(STS040,STS030,<$ALTERNATE(STS050)>)
STS030: $STAB
ORNSWI(<NODE:>,NOD)
$ETAB
STS040: $NODNM(STS130,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
STS050: $RANGE(STS060,<number or range (n:m)(/NODE:)>,<$ALTERNATE(STS130)>)
STS060: $NODE(STS130)
STS100: $SWITCH(STS120,STS110,<$ALTERNATE(STS130)>)
STS110: $STAB
ORNSWI(<NODE:>,NOD)
$ETAB
STS120: $NODNM(STS130,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
STS130: $SWITCH(CONFRM,STS140,<$ALTERNATE(CONFRM)>)
STS140: $STAB
ORNSWI(SHORT,SHT)
$ETAB
STS150: $DEV(STS170,<$HELP(<tape drive name>),$ALTERNATE(STS170),$FLAGS(CM%NSF)>)
STS160: $CRLF(<$ALTERNATE(STS150)>)
STS170: $SWITCH(CONFRM,STS180,<$ALTERNATE(CONFRM)>)
STS180: $STAB
ORNSWI(ALL,ALL)
TOPS20< ORNSWI(CHARACTERISTICS,CHR) > ;TOPS20 ONLY
ORNSWI(FREE,FRE)
$ETAB
STS190: $SWITCH(CONFRM,STS200,<$ALTERNATE(STS210)>)
STS200: $STAB
ORNSWI(ALL,ALL)
ORNSWI(FREE,AVA)
ORNSWI(MOUNTED,MNT)
$ETAB
TOPS20<
STS210: $CRLF
>;END TOPS20
TOPS10<
STS210: $CRLF(<$ALTERNATE(STS220)>)
STS220: $DEV(CONFRM,<$HELP(<disk drive name>),$FLAGS(CM%PO!CM%NSF)>)
>;END TOPS10
TOPS10<
STS250: $DEV(STS260,<$HELP(<structure name>),$ALTERNATE(STS260),$FLAGS(CM%PO!CM%NSF)>)
STS260: $SWITCH(CONFRM,STS270,<$ALTERNATE(CONFRM)>)
STS270: $STAB
ORNSWI(USERS,USR)
$ETAB
>;END TOPS10
STS300: $RANGE(CONFRM,<stream number or range (n:m)>,$ALTER(CONFRM))
SUBTTL SHOW SYSTEM-LIST command tables
TOPS10<
SYS000: $KEY (CONFRM,SYS010,$DEFAULT(<LISTS>))
SYS010: $STAB
ORNKEY (<LISTS>,LST)
ORNKEY (<PARAMETERS>,PRM)
$ETAB
REPEAT 0,<
SYS000: $CRLF ($ALTERNATE(SYS010))
SYS010: $KEY (CONFRM,SYS020)
SYS020: $STAB
ORNKEY (<ACTIVE-SWAPPING-LIST>,ASL)
ORNKEY (<CRASH-DUMP-LIST>,CDL)
ORNKEY (<SYSTEM-SEARCH-LIST>,SSL)
$ETAB
>;END REPEAT 0
>;END TOPS10
SUBTTL LOCK/UNLOCK command tables
TOPS10 <
;LOCK COMMAND
LOCFDB: $NOISE(LOC010,<structure>)
LOC010: $DEV(LOC015,<$FLAGS(CM%PO!CM%NSF),$HELP(<structure name>)>)
LOC015: $NOISE(LOC020,<at>)
LOC020: $FTAD(LOC030,<$ALTERNATE(LOC030)>)
LOC030: $SWITCH (CONFRM,LOC040,<$ALTERNATE(CONFRM)>)
LOC040: $STAB
ORNSWI(NOUNLOAD,NUL)
$ETAB
;UNLOCK COMMAND
ULCFDB: $NOISE(ULC010,<structure>)
ULC010: $DEV(ULC015,<$FLAGS(CM%PO!CM%NSF),$HELP(<structure name>)>)
ULC015: $NOISE(ULC020,<at>)
ULC020: $FTAD(CONFRM,<$ALTERNATE(CONFRM)>)
>;END TOPS10
SUBTTL SHWNOD SHOW STATUS/PARAMETERS FOR NODE
SHWNOD: $CRLF (<$ALTERNATE(SHWN01)>)
SHWN01: $NODNM(CONFRM,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
SUBTTL RESPOND command tables
RSPFDB: $NOISE (RSP001,<to message number>)
RSP001: $NUMBER (RSP005,^D10,<message number>,$ACTION(CHKVAL))
RSP005: $CRLF (<$ALTER(RSP010),$ACTION(TXTLIN##),$HELP(<confirm for multiple line response>)>)
RSP010: $CTEXT (CONFRM,<single line response>)
SUBTTL RESTRICT and UNRESTRICT command tables
TOPS10 <
RSTFDB: $NOISE (RST001,<device>)
RST001: $DEV (CONFRM,<$FLAGS(CM%NSF),$HELP(<device name>)>)
> ;END TOPS10
SUBTTL REQUEUE command tables
REQFDB: $NOISE (REQ010,<current job on>)
REQ010: $KEYDSP (REQ020)
REQ020: $STAB
ORNDSP (REQ030,<BATCH-STREAM>,BAT)
ORNDSP (REQ040,<CARD-PUNCH>,CDP)
IFN FTFTS,<
ORNDSP (REQ030,<FTS-STREAM>,FTS)
> ;End FTFTS conditional
ORNDSP (REQ110,<NQC-STREAM>,NQC)
ORNDSP (REQ040,<PAPER-TAPE-PUNCH>,PTP)
ORNDSP (REQ040,<PLOTTER>,PLT)
ORNDSP (REQ040,<PRINTER>,LPT)
$ETAB
; Batch tables
;
REQ030: $STREAM (REQ100)
; Output device tables
;
REQ040: $UNIT (REQ050)
REQ050: $KEYDSP (REQ060,<$DEFAULT(CURRENT-POSITION),$ALTER(REQ100)>)
REQ060: $STAB
ORNDSP (REQ070,<BEGINNING-OF>,BEG)
ORNDSP (REQ100,<CURRENT-POSITION>,CUR)
$ETAB
REQ070: $KEY (REQ100,REQ080)
REQ080: $STAB
ORNKEY (<COPY>,CPY)
ORNKEY (<FILE>,FIL)
ORNKEY (<JOB>,JOB)
$ETAB
REQ100: $EXPL (CONFRM,<$ALTER(CONFRM)>)
;NQC streams
REQ110: $STREAM (CONFRM)
SUBTTL BACKSPACE command tables
SUBTTL FORWARDSPACE command tables
BKSFDB: $KEY (BKS002,BKS001,<$DEFAULT(<PRINTER>)>)
BKS001: $STAB
ORNKEY (<PRINTER>,LPT)
$ETAB
BKS002: $UNIT(BKS003)
BKS003: $SWITCH(,BKS004)
BKS004: $STAB
ORNSDP(BKS005,<COPIES:>,CPY)
ORNSDP(CONFRM,<FILE>,FIL)
ORNSDP(BKS007,<PAGES:>,PAG)
$ETAB
BKS005: $NUMBER (CONFRM,^D10,<number of copies>,$ACTION(CHKVAL))
REPEAT 0,<
BKS006: $NUMBER (CONFRM,^D10,<number of files>,<$ACTION(CHKFIL),$DEFAULT(<1>)>)
>
BKS007: $NUMBER (CONFRM,^D10,<number of pages>,$ACTION(CHKVAL))
REPEAT 0,<
CHKFIL: SKIPG T1,CR.RES(S2) ;CHECK THAT NUMBER
JRST CHKF.1 ;GENERTE AN ERROR
CAIN T1,1 ;WAS IT A 1
$RETT ;O.K..RETURN
CHKF.1: PUSHJ P,P$FIXP##
MOVEI S2,[ASCIZ/only one file allowed/]
$RETF
>
SUBTTL ALIGN command table
ALIFDB: $NOISE (ALI001,<forms on>)
ALI001: $KEY (ALI003,ALI002,<$DEFAULT(<PRINTER>)>)
ALI002: $STAB
ORNKEY (<PRINTER>,LPT)
$ETAB
ALI003: $UNIT(ALI010)
ALI004: $IFILE (ALI005,<alignment file>,<$ALTER(ALI005)>)
ALI005: $SWITCH(,ALI006,<$ALTER(CONFRM),$ACTION(SHRSWT)>)
ALI006: $STAB
ORNSDP(ALI007,<PAUSE:>,PAU)
ORNSDP(ALI008,<REPEAT-COUNT:>,RPT)
$ETAB
ALI007: $NUMBER (NEXT,^D10,<seconds to pause>,$ACTION(CHKVAL))
ALI008: $NUMBER (NEXT,^D10,<times to print>,$ACTION(CHKVAL))
ALI009: $STAB
ORNSWI(STOP,STP)
$ETAB
ALI010: $SWITCH(CONFRM,ALI009,<$ALTER(ALI004)>)
SUBTTL SUPPRESS command tables
SUPFDB: $NOISE (SUP001,<carriage control on>)
SUP001: $KEY (SUP010,SUP005,<$DEFAULT(<PRINTER>)>)
SUP005: $STAB
ORNKEY (<PRINTER>,LPT)
$ETAB
SUP010: $UNIT(SUP015)
SUP015: $SWITCH(CONFRM,SUP020,<$DEFAULT(</JOB>),$ALTER(CONFRM)>)
SUP020: $STAB
ORNSWI(FILE,FIL)
ORNSWI(JOB,JOB)
ORNSWI(STOP,STP)
$ETAB
SUBTTL ROUTE command tables
RTEFDB: $NOISE (RTEF05,device)
RTEF05: $KEYDSP(RTEF10)
RTEF10: $STAB
ORNDSP(RTEF50,<ALL-DEVICES>,ALL)
ORNDSP(RTEF15,<CARD-PUNCH>,CDP)
ORNDSP(RTEF15,<PAPER-TAPE-PUNCH>,PTP)
ORNDSP(RTEF15,<PLOTTER>,PLT)
ORNDSP(RTEF15,<PRINTER>,LPT)
$ETAB
RTEF15: $NOISE (RTEF20,<unit number>)
RTEF20: $NUMBER (RTEF35,^D10,<source device unit number>,$ALTERN(RTEF25))
RTEF25: $KEYDSP (RTEF30)
RTEF30: $STAB
ORNDSP (RTEF35,<ALL-UNITS>,ALL)
$ETAB
;To explain the following magical line...
;The default '(' is to allow an ESC to go to the next field and display noise.
;The ERRPDB is used to only get to the next field on switch error or ESC.
;The alternate is to permit entering the destination or crlf
RTEF35: $SWITCH (RTEF39,RTEF36,<$DEFAULT(<(>),$ERRPDB(RTEF40),$ALTER(RTEF45)>)
RTEF36: $STAB
ORNSWI(NODE:,NOD)
$ETAB
RTEF39: $NODNM (RTEF40,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
RTEF40: $NOISE (RTEF45,<to unit number>)
RTEF45: $NUMBER (RTEF48,^D10,<destination unit number>,<$ALTERNATE(RTEF46)>)
RTEF46: $KEYDSP (RTEF47,<$ALTERNATE(RTEF80)>)
RTEF47: $STAB
ORNDSP (RTEF48,<ALL-UNITS>,ALL)
$ETAB
RTEF48: $NODE (CONFRM)
;For parsing all devices
RTEF50: $NOISE (RTEF55,<on node>)
RTEF55: $KEYDSP (RTEF60,<$HELP(<ALL-NODES>),$ALTERNATE(RTEF65)>)
RTEF60: $STAB
ORNDSP (RTEF70,<ALL-NODES>,ALL)
$ETAB
RTEF65: $NODNM (RTEF70,<source node name>,<$FLAGS(CM%PO!CM%NSF)>)
RTEF70: $NOISE (RTEF75,<to node>)
RTEF75: $NODNM (CONFRM,,<$ALTERNATE(RTEF80),$FLAGS(CM%PO!CM%NSF)>)
RTEF80: $CRLF ($HELP(<confirm to delete routing>))
SUBTTL SEND command tables
SNDFDB: $NOISE (SND001,<to>)
SND001: $KEYDSP (SND005)
SND005: $STAB
ORNDSP(SND040,<ALL>,ALL)
ORNDSP(SND015,<BATCH-STREAM>,BAT)
ORNDSP(SND010,<JOB>,JOB)
ORNDSP(SND025,<OPERATOR>,OPR)
ORNDSP(SND020,<TERMINAL>,TRM)
$ETAB
SND010: $NUMBER(SND030,^D10,<job number>,$ACTION(CHKVAL))
SND015: $STNUM(SND025)
SND020: $NUMBER(SND030,^D8,<terminal number>,$ACTION(CHKVAL))
SND025: $NODE(SND030)
SND030: $CRLF (<$ALTER(SND035),$ACTION(TXTLIN##),$HELP(<confirm for multiple line response>)>)
SND035: $CTEXT (CONFRM,<single line response>)
SND040: $NODE(SND035)
SUBTTL SET command tables
SETFDB: $KEYDSP(SET010)
SET010: $STAB
ORNDSP(SET170,BATCH-STREAM,BAT)
ORNDSP(SET490,<CARD-PUNCH>,CDP)
TOPS20< ORNDSP(SET700,<DISK-DRIVE>,DSK)>
ORNDSP(SETFAL,<FAL-STREAM>,FAL)
ORNDSP(SET070,JOB,JOB)
TOPS10< ORNDSP(SETKSY,KSYS,KSY)>
IFN FTDN60,<
ORNDSP(SETNOD,<NODE>,NOD)
>;END FTDN60
ORNDSP(SETNQC,<NQC-STREAM>,NQC)
TOPS20< ORNDSP(SET800,<ONLINE>,ONL)>
ORNDSP(SET430,<PAPER-TAPE-PUNCH>,PTP)
ORNDSP(SET370,PLOTTER,PLT)
ORNDSP(SET200,PRINTER,LPT)
TOPS20< ORNDSP(SETSCH,<SCHEDULER>,SCH)>
TOPS20< ORNDSP(SET600,<STRUCTURE>,STR)>
TOPS10< ORNDSP(SETSYS,<SYSTEM>,SYS)>
ORNDSP(SET630,<TAPE-DRIVE>,TAP)
ORNDSP(SET020,TERMINAL,TRM)
TOPS10< ORNDSP(SET900,USAGE,USG)>
$ETAB
;SET FAL-STREAM command
SETFAL: $RANGE (SETF00,<stream number or range (n:m)>)
SETF00: $KEYDSP (SETF05,<$DEFAULT(NETWORK)>)
SETF05: $STAB
ORNDSP (SETF10,<NETWORK>,NET)
$ETAB
SETF10: $KEY (CONFRM,SETF15)
SETF15: $STAB
ORNKEY(<ANF-10>,ANF)
ORNKEY(DECNET,DCN)
$ETAB
;SET TERMINAL command
SET020: $KEYDSP(SET030,<$ACTION(SETRTN##)>)
SET030: $STAB
TOPS10< ORNDSP(SET350,KEYPAD,KPD)
ORNDSP(SET350,NOKEYPAD,NKP)>
ORNDSP(SET040,<TYPE>,TYP)
$ETAB
SET040: $NOISE (SET050,<to be>)
SET050: $KEY(SET350,SET060,<$ACTION(SETRTN##)>)
SET060: $STAB
DEFINE X(PARNAM,SIXNAM,SUF,EOLSEQ),<
KEYTAB(.TT'SUF,<PARNAM>)
>;END DEFINE X
TRMTYP ;Generate the options
$ETAB
SET070: $NOISE(SET080,<job number>)
SET080: $NUMBER(SET090,^D10,<job number>,$ACTION(CHKVAL))
SET090: $KEYDSP(SET100)
SET100: $STAB
ORNDSP(CONFRM,<NOOPR-INTERVENTION>,NOI)
ORNDSP(CONFRM,<OPR-INTERVENTION>,OIA)
TOPS20< ORNDSP(SET110,SCHEDULER-CLASS,CLS)>
$ETAB
TOPS20 <
SET110: $NOISE(SET120,<to be>)
SET120: $NUMBER(CONFRM,^D10,<scheduler class to put the job in>)
>;END TOPS20
SET170: $SRANGE(SET180)
SET180: $KEYDSP(SET250)
SET200: $URANGE(SET210)
SET210: $KEYDSP(SET300)
SET250: $STAB
ORNDSP(SET295,ATTRIBUTE,ATR)
TOPS10< ORNDSP(SET290,<MEMORY-LIMITS>,MEM)>
ORNDSP(CONFRM,NOOPR-INTERVENTION,NOI)
ORNDSP(CONFRM,OPR-INTERVENTION,OIA)
ORNDSP(SET260,PRIORITY-LIMITS,PRL)
ORNDSP(CONFRM,SYSTEM-OPR-INTERVENTION,SOI)
ORNDSP(SET270,TIME-LIMITS,TIM)
$ETAB
SET260: $RANGE(CONFRM,<maximum priority limit or a range (1-63)>)
SET270: $RANGE(CONFRM,<maximum time limits in minutes or a range>)
SET280: $NUMBER(CONFRM,^D10,<line number>,$ACTION(CHKVAL))
;GET MEMORY LIMITS
TOPS10 <
SET290: $RANGE(CONFRM,<maximum number of pages or a range>)
> ;End TOPS10
SET295: $KEYDSP(SET297)
SET297: $STAB
ORNDSP(CONFRM,BATCON,BAT)
ORNDSP(CONFRM,SITGO,SIT)
$ETAB
SET300: $STAB
ORNDSP(SET330,FORMS-TYPE,FOT)
ORNDSP(SET340,LIMIT-EXCEEDED-ACTION,LEA)
ORNDSP(CONFRM,LP20-SIMULATION,LP2)
ORNDSP(MTAFDB,MAGTAPE,MTA)
ORNDSP(SET301,NO,NO)
ORNDSP(SET310,PAGE-LIMITS,PGL)
ORNDSP(SET260,PRIORITY-LIMITS,PRL)
ORNDSP(SET305,<UNIT-TYPE>,UTY)
$ETAB
SET301: $KEYDSP (SET302)
SET302: $STAB
ORNDSP (CONFRM,LP20-SIMULATION,LP2)
$ETAB
SET305: $FIELD (CONFRM,<unit type>)
SET310: $RANGE(CONFRM,<maximum number of pages or a range>)
SET320: $STAB
ORNKEY(ABORT,CNC)
ORNKEY(ASK,ASK)
ORNKEY(PROCEED,IGN)
$ETAB
SET330: $FIELD(CONFRM,<forms name>)
SET340: $KEY(CONFRM,SET320)
SET350: $CRLF(<$ACTION(SETTRM##)>)
SET370: $URANGE (SET380)
SET380: $KEYDSP (SET390)
SET390: $STAB
ORNDSP (SET330,<FORMS-TYPE>,FOT)
ORNDSP (SET340,LIMIT-EXCEEDED-ACTION,LEA)
ORNDSP (MTAFDB,MAGTAPE,MTA)
ORNDSP (SET480,<OUTPUT-LIMIT>,OPL)
ORNDSP (SET260,PRIORITY-LIMITS,PRL)
; ORNDSP (SET395,<UNIT-TYPE>,UTY)
$ETAB
SET395: $FIELD (CONFRM,<unit type>)
SET430: $URANGE (SET440)
SET440: $KEYDSP (SET450)
SET450: $STAB
ORNDSP (SET330,<FORMS-TYPE>,FOT)
ORNDSP (SET340,LIMIT-EXCEEDED-ACTION,LEA)
ORNDSP (MTAFDB,MAGTAPE,MTA)
ORNDSP (SET470,<OUTPUT-LIMIT>,OPL)
ORNDSP (SET260,PRIORITY-LIMITS,PRL)
ORNDSP (SET460,<UNIT-TYPE>,UTY)
$ETAB
SET460: $FIELD (CONFRM,<unit type>)
SET470: $RANGE(CONFRM,<maximum limit in feet or a range>)
SET480: $RANGE(CONFRM,<maximum limit in minutes or a range>)
SET490: $URANGE(SET500)
SET500: $KEYDSP (SET510)
SET510: $STAB
ORNDSP (SET330,<FORMS-TYPE>,FOT)
ORNDSP (SET340,LIMIT-EXCEEDED-ACTION,LEA)
ORNDSP (MTAFDB,MAGTAPE,MTA)
ORNDSP (SET530,<OUTPUT-LIMIT>,OPL)
ORNDSP (SET260,PRIORITY-LIMITS,PRL)
; ORNDSP (SET520,<UNIT-TYPE>,UTY)
$ETAB
SET520: $FIELD (CONFRM,<unit type>)
SET530: $RANGE(CONFRM,<maximum limit in cards or a range>)
;SPECIAL COMMAND TABLES FOR MAGTAPE SPOOLING PARAMETERS
MTAFDB: $SWITCH(,MTA010,<$ACTION(SHRSWT),$ALTERN(CONFRM)>)
MTA010: $STAB
ORNSDP (MTA020,<DENSITY:>,MDN)
ORNSDP (MTA990,<DIRECTORY-FILE:>,MDI)
ORNSDP (MTA030,<LABEL-TYPE:>,MLT)
ORNSDP (MTA990,<MULTI-REEL:>,MRL)
ORNSDP (MTA040,<PARITY:>,MPR)
ORNSDP (MTA050,<TRACKS:>,MTK)
ORNSDP (MTA060,<VOLUME-SET:>,MVS)
$ETAB
;SET DENSITY
MTA020: $KEYDSP (MTA021,<$DEFAULT(<DEFAULT>)>)
MTA021: $STAB
ORNDSP (NEXT(MTAFDB),<1600>,160)
ORNDSP (NEXT(MTAFDB),<200>,200)
ORNDSP (NEXT(MTAFDB),<556>,556)
ORNDSP (NEXT(MTAFDB),<6250>,625)
ORNDSP (NEXT(MTAFDB),<800>,800)
ORNDSP (NEXT(MTAFDB),<DEFAULT>,DFL)
$ETAB
;SET LABEL-TYPE
MTA030: $KEYDSP (MTA031)
MTA031: $STAB
ORNDSP (NEXT(MTAFDB),<ANSI>,ANS)
ORNDSP (NEXT(MTAFDB),<DEFAULT>,DFL)
ORNDSP (NEXT(MTAFDB),<EBCDIC>,EBC)
ORNDSP (NEXT(MTAFDB),<IBM>,EBC)
ORNDSP (NEXT(MTAFDB),<UNLABELED>,UNL)
$ETAB
;SET PARITY
MTA040: $KEYDSP (MTA041,<$DEFAULT(<DEFAULT>)>)
MTA041: $STAB
ORNDSP (NEXT(MTAFDB),<DEFAULT>,DFL)
ORNDSP (NEXT(MTAFDB),<EVEN>,EVN)
ORNDSP (NEXT(MTAFDB),<ODD>,ODD)
$ETAB
;SET TRACKS
MTA050: $KEYDSP (MTA051,<$DEFAULT(<DEFAULT>)>)
MTA051: $STAB
ORNDSP (NEXT(MTAFDB),<7>,7TK)
ORNDSP (NEXT(MTAFDB),<9>,9TK)
ORNDSP (CONFRM,<DEFAULT>,DFL)
$ETAB
;SET VOLUME-SET-NAME
MTA060: $QUOTE (NEXT(MTAFDB),<quoted or unquoted string>,<$ALTER (MTA061)>)
MTA061: $FIELD (NEXT(MTAFDB),,<$BREAK (MTA062),$FLAGS (CM%SDH)>)
MTA062: 777777,,777760 ;BREAK ON ALL CONTROL
777754,,001760 ;ALLOW - AND 0-9
400000,,000760 ;ALLOW UC A-Z
400000,,000760 ;ALLOW LC A-Z
;SET MULTI-REEL
;SET DIRECTORY-FILE
MTA990: $KEYDSP (MTA991,<$DEFAULT(<DEFAULT>)>)
MTA991: $STAB
ORNDSP (NEXT(MTAFDB),<DEFAULT>,DFL)
ORNDSP (NEXT(MTAFDB),<NO>,NO)
ORNDSP (NEXT(MTAFDB),<YES>,YES)
$ETAB
SUBTTL SET TAPE and DISK command tables (TOPS20)
TOPS20 <
SET600: $DEV (SET610,<$HELP(<structure name>),$FLAGS(CM%PO!CM%NSF)>)
SET610: $KEYDSP(SET620)
SET620: $STAB
ORNDSP(SET622,<ACKNOWLEDGED>,ACK)
ORNDSP(SET624,<AVAILABLE>,AVA)
ORNDSP(CONFRM,<DOMESTIC>,DOM)
ORNDSP(CONFRM,<FOREIGN>,FOR)
ORNDSP(SET622,<IGNORED>,IGN)
ORNDSP(CONFRM,<REGULATED>,REG)
ORNDSP(SET624,<UNAVAILABLE>,UAV)
ORNDSP(CONFRM,<UNREGULATED>,URG)
$ETAB
SET622: $NOISE(CONFRM,<as a new mountable structure>)
SET624: $NOISE(CONFRM,<to new users>)
>;END TOPS20
SET630: $DEV(SET640,<$HELP(<tape drive name>),$FLAGS(CM%NSF)>)
SET640: $KEYDSP(SET650,<$ACTION(SET655)>)
SET650: $STAB
ORNDSP(SET660,<AVAILABLE>,AVA)
ORNDSP(SETINI,<INITIALIZE>,INI)
ORNDSP(SET670,<UNAVAILABLE>,UAV)
$ETAB
$DATA VOLIDF,1 ;Volume id flag (used for INITIALIZE)
;if 0 then switch not used
;if -1 then switch used
;if 1 then switch needed (ANSI labels)
SET655: SETZM VOLIDF ;Initialize volid flag
$RETT
SET660: $NOISE(CONFRM,<for use by system>)
SET670: $CRLF (<$ALTER(SET680),$ACTION(TXTLIN##),$HELP(<confirm for multiple line explanation for drive unavailable>)>)
SET680: $CTEXT (CONFRM,<single line response>)
TOPS20 <
SET700: $NOISE(SET705,<on>)
SET705: $KEY(SET720,SET710,<$DEFAULT(<CHANNEL>)>)
SET710: $STAB
ORNKEY(<CHANNEL>,CHN)
$ETAB
SET720: $NUMBER(SET730,^D8,<channel number>,<$ACTION(CHKCHN)>)
SET730: $KEY(SET750,SET740,<$DEFAULT(<DRIVE>)>)
SET740: $STAB
ORNKEY(<DRIVE>,DRV)
$ETAB
SET750:$NUMBER(SET760,^D8,<drive number>,<$ACTION(CHKVAL)>)
SET760: $KEYDSP(SET770)
SET770: $STAB
ORNDSP(SET660,<AVAILABLE>,AVA)
ORNDSP(SET670,<UNAVAILABLE>,UAV)
$ETAB
>;END TOPS20
SUBTTL SET ONLINE command tables
TOPS20 <
SET800: $NOISE(SET810,<device address>)
SET810: $NUMBER(SET820,<^D8>,<channel number>,<$ACTION(CHKCHN)>)
SET820: $COMMA(SET830)
SET830: $NUMBER(SET840,<^D8>,<device unit number>,<$ACTION(CHKVAL)>)
SET840: $COMMA(SET850,<$ALTERNATE(<CONFRM>)>)
SET850: $NUMBER(SET860,<^D8>,<controller number or -1>,<$DEFAULT(<-1>)>)
SET860: $NOISE(SET865,<alternate address>)
SET865: $NUMBER(SET870,<^D8>,<alternate channel>,<$ACTION(CHKCHN),$ALTERNATE(CONFRM)>)
SET870: $COMMA(SET875)
SET875: $NUMBER(SET880,<^D8>,<alternate device unit number>,<$ACTION(CHKVAL)>)
SET880: $COMMA(SET885,<$ALTERNATE(<CONFRM>)>)
SET885: $NUMBER(CONFRM,<^D8>,<alternate controller number or -1>,<$DEFAULT(<-1>)>)
CHKCHN: SKIPL S1,CR.RES(S2) ;CHECK THAT NUMBER
CAILE S1,7 ;IN BOUNDS
SKIPA ;BAD NUMBER
$RETT ;IT'S GOOD
PUSHJ P,P$FIXP##
MOVEI S2,[ASCIZ/channel number not in range 0:7/]
$RETF
>;END TOPS20
SUBTTL SET USAGE command tables
TOPS10<
SET900: $KEYDSP(SET901)
SET901: $STAB
ORNDSP(SET902,BILLING-CLOSURE,UBC)
ORNDSP(SET920,FILE-CLOSURE,UFC)
$ETAB
SET902: $KEYDSP(SET903,<$ALTER(SET910)>)
SET903: $STAB
ORNDSP(SET904,DAILY,DLY)
ORNDSP(SET906,EVERY,WKY)
ORNDSP(EVTSWT,NOW,NOW)
$ETAB
SET904: $NOISE(SET905,<at>)
SET905: $TIME(EVTSWT)
SET906: $KEY(SET904,SET942)
SET910: $FTAD(EVTSWT)
SET920: $KEYDSP(SET925,<$ALTER(SET950)>)
SET925: $STAB
ORNDSP(SET930,DAILY,DLY)
ORNDSP(SET940,EVERY,WKY)
ORNDSP(SET960,NOW,NOW)
$ETAB
SET930: $NOISE(SET932,<at>)
SET932: $TIME(SET960)
SET940: $KEY(SET945,SET942)
SET942: $STAB
KEYTAB(2,FRIDAY)
KEYTAB(5,MONDAY)
KEYTAB(3,SATURDAY)
KEYTAB(4,SUNDAY)
KEYTAB(1,THURSDAY)
KEYTAB(6,TUESDAY)
KEYTAB(0,WEDNESDAY)
$ETAB
SET945: $NOISE(SET946,<at>)
SET946: $TIME(SET960)
SET950: $TAD(SET960)
SET960: $SWITCH(EVTSWT,SET965,<$ALTERNATE(EVTSWT)>)
SET965: $STAB
ORNSWI(<NO-SESSION-ENTRIES>,NOS)
$ETAB
SUBTTL SET KSYS command tables
SETKSY: $NOISE(SETK00,<to stop timesharing>)
SETK00: $KEYDSP(SETK01,<$ALTER(SETK02)>)
SETK01: $STAB
ORNDSP(SETK04,DAILY,DLY)
ORNDSP(SETK03,EVERY,WKY)
ORNDSP(SETK09,NOW,NOW)
$ETAB
SETK02: $FTAD(SETK09)
SETK03: $KEY(SETK04,SET942)
SETK04: $NOISE(SETK05,<at>)
SETK05: $TIME(SETK09)
SETK09: $SWITCH(EVTSWT,SETK10,<$ALTER(EVTSWT)>)
SETK10: $STAB
ORNSWI(CM,CM)
ORNSWI(NEW,NEW)
ORNSWI(PM,PM)
ORNSWI(SA,SA)
ORNSWI(SCHED,SCH)
$ETAB
SUBTTL EVTSWT - Common Event Switches
;Switches that should be common to all commands that queue an EVENT.
;EVTMSG in OPRQSR parses these switches for free and creates .QBESW block.
;These switches are parsed LAST in a command. Event specific switches
;should be before the common event switches. /REASON: is the last switch
;parsed because we only allow single line reason followed by <CR><LF>.
EVTSWT: $SWITCH(,EVTS00,<$ACTION(SHRSWT),$ALTER(CONFRM)>)
EVTS00: $STAB
ORNSDP(NEXT(EVTSWT),<FAILSOFT>,FSF)
ORNSDP(EVTS10,<FILE:>,FIL)
ORNSDP(EVTS20,<REASON:>,RSN)
$ETAB
EVTS10: $IFILE(NEXT(EVTSWT),<file to TAKE at KSYS time>)
EVTS20: $CTEXT(CONFRM,<reason text (same line) followed by confirm>)
;;***************************************************
;;SETK11: $SWITCH(SETK13,SETK12,<$ALTER(SETK14)>)
;;
;;SETK12: $STAB
;; ORNSWI(FILE:,FIL)
;; $ETAB
;;
;;SETK13: $IFILE(SETK14,<file to TAKE at KSYS time>)
;;
;;SETK14: $SWITCH(SETK16,SETK15,<$ALTER(CONFRM)>)
;;
;;SETK15: $STAB
;; ORNSWI(<REASON:>,RSN)
;; $ETAB
;;
;;SETK16: $CTEXT(CONFRM,<reason text (same line) followed by confirm>)
;;
;;******************************************************
> ;End TOPS10 conditional
SUBTTL SET SYSTEM BATMAX, BATMIN, and LOGMAX command tables
TOPS10<
SETSYS: $KEYDSP(SETSTB)
SETSTB: $STAB
ORNDSP(SETBMX,<BATMAX>,BMX)
ORNDSP(SETBMN,<BATMIN>,BMN)
ORNDSP(SETCMX,<CORMAX>,CMX)
ORNDSP(SETCMN,<CORMIN>,CMN)
ORNDSP(SETDAT,<DATE>,DAT)
ORNDSP(SETDAY,<DAYTIME>,DAY)
ORNDSP(SETCSZ,<DISK-CACHE-SIZE>,CSZ)
ORNDSP(SETLMX,<LOGMAX>,LMX)
ORNDSP(SETSCD,<SCHEDULE>,SCD)
$ETAB
SETBMX: $NUMBER(CONFRM,^D10,<maximum number of logged-in batch jobs>)
SETBMN: $NUMBER(CONFRM,^D10,<number of jobs reserved for batch>)
SETCMX: $FIELD(CONFRM,<maximum core size in K or P for a job>,$BREAK(SETBRK))
SETCMN: $FIELD(CONFRM,<minimum guaranteed contiguous core in K or P>,$BREAK(SETBRK))
SETDAT: $DATE(CONFRM,$HELP(<enter date as dd-mmm-yy>))
SETDAY: $TIME(CONFRM,$HELP(<enter time as hh:mm:ss>))
SETCSZ: $NUMBER(CONFRM,^D10,<number of blocks in monitor disk cache>,$ALTER(SETCS1))
SETCS1: $CRLF($HELP(<carriage return to reset to configured size>))
SETLMX: $NUMBER(CONFRM,^D10,<maximum number of logged-in jobs>)
SETSCD: $NUMBER(CONFRM,^D8,<schedule bits in octal>)
SETBRK: 777777,,777777 ;BREAK ON ALL CONTROL
777774,,001777 ;ALLOW 0 THRU 9
777675,,777777 ;ALLOW UC K OR P
777675,,777777 ;ALLOW LC K OR P
> ;End TOPS10 conditional
SUBTTL SET TAPE INITIALIZE command tables
SETINI: $SWITCH(,INI010,<$ACTION(SHRSWT),$ALTERNATE(INI250)>)
INI010: $STAB
TOPS10< ORNDSP(INI300,<ABORT>,CNC) >
ORNSDP(INI140,<COUNT:>,CNT)
ORNSDP(INI020,<DENSITY:>,DEN)
ORNSDP(INI240,<INCREMENT:>,INC)
ORNSDP(INI040,<LABEL-TYPE:>,LBT)
ORNSDP(INI060,<OVERRIDE-EXPIRATION:>,OVR)
ORNSDP(INI080,<OWNER:>,OWN)
ORNSDP(INI100,<PROTECTION:>,PRO)
ORNSDP(INI120,<TAPE-DISPOSITION:>,TDP)
ORNSDP(INI170,<VOLUME-ID:>,VID)
$ETAB
INI020: $KEY(NEXT(SETINI),INI030,<$DEFAULT(<1600>)>)
INI030: $STAB
ORNKEY(1600,160)
ORNKEY(200,200)
ORNKEY(556,556)
ORNKEY(6250,625)
ORNKEY(800,800)
$ETAB
INI040: $KEY(NEXT(SETINI),INI050,<$ACTION(INI057),$DEFAULT(<ANSI>)>)
INI050: $STAB
ORNKEY(ANSI,ANS)
ORNKEY(EBCDIC,EBC)
TOPS20< ORNKEY(TOPS-20,T20)>
INI055: ORNKEY(UNLABELED,UNL)
$ETAB
INI057: MOVE S1,CR.RES(S2) ;Get the result from the key table
CAIE S1,INI055 ;Was the label type unlabeled?
SKIPE VOLIDF ;No - skip if still need volume id
$RETT ;No further action needed
MOVEI S1,1
MOVEM S1,VOLIDF ;Set that we need volid to be specified
$RETT
;**;[147]CHANGE 1 LINE AT INI060:+0L 6-MAR-84/CTK
INI060: $KEY(NEXT(SETINI),INI070,<$DEFAULT(<YES>)>) ;[147]DEFAULT YES
INI070: $STAB
ORNKEY(NO,NO)
ORNKEY(YES,YES)
$ETAB
TOPS20 <
INI080: $USER(NEXT(SETINI),<$HELP(<user who owns the tape>)>)
>;END -20
TOPS10 <
INI080: $USER(NEXT(SETINI),<$HELP(<user PPN who owns the tape>)>)
>;END -10
INI100: $NUMBER(NEXT(SETINI),^D8,<protection for the tape as an octal number>)
INI120: $KEY(NEXT(SETINI),INI130,<$DEFAULT(<UNLOAD>)>)
INI130: $STAB
ORNKEY(HOLD,HLD)
ORNKEY(UNLOAD,UNL)
$ETAB
INI140: $NUMBER(NEXT(SETINI),^D10,<number of volumes to be initialized>,<$ACTION(CHKPOS),$DEFAULT(<10>)>)
INI170: $FIELD(NEXT(SETINI),<volume-id without quotes>,<$PREFILL(INI175)>)
INI175: SETOM VOLIDF ;Say we saw volume id
$RETT
INI240: $NUMBER(NEXT(INI200),^D10,<increment value for assigning next volume-id>,<$ACTION(CHKPOS),$DEFAULT(<1>)>)
INI250: $CRLF ($ACTION(INI260))
INI260: SKIPG VOLIDF ;Is it not needed or not used?
$RETT ;Yes
MOVEI S2,[ASCIZ/Volid must be specified/]
$RETF
INI300: $CRLF (<$HELP(<confirm to abort tape initialization>)>)
SUBTTL SET NETWORK-QUEUE-CONTROLLER command tables
SETNQC: $SRANGE (NQC010)
NQC010: $KEYDSP (NQC020,<$DEFAULT(<ATTRIBUTE>)>)
NQC020: $STAB
ORNDSP (NQC030,<ATTRIBUTE>,ATR)
$ETAB
NQC030: $KEYDSP (NQC040)
NQC040: $STAB
ORNDSP (CONFRM,<INPUT-STREAM>,NQI)
ORNDSP (CONFRM,<OUTPUT-STREAM>,NQO)
$ETAB
SUBTTL SET NODE command tables
IFN FTDN60,<
SETNOD: $NODNM(SETN10,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
SETN10: $KEYDSP(SETN20)
SETN20: $STAB
ORNDSP(SETN95,<BYTES-PER-MESSAGE>,BPM)
ORNDSP(SETN40,<CLEAR-SEND-DELAY>,CSD)
ORNDSP(SETN60,<RECORDS-PER-MESSAGE>,RPM)
ORNDSP(SETN80,<TIMEOUT-CATEGORY>,TOU)
ORNDSP(SETN90,<TRANSPARENCY>,TRA)
$ETAB
SETN40: $NUMBER(CONFRM,^D10,<time in jiffies>,<$ACTION(CHKVAL)>)
SETN50: $KEY(CONFRM,SETN55,<$DEFAULT(<ON>)>)
SETN55: $STAB
ORNKEY(<OFF>,OFF)
ORNKEY(<ON>,ON)
$ETAB
SETN60: $NUMBER(CONFRM,^D10,<records per message for 2780>,<$ACTION(CHKVAL)>)
SETN80: $KEY(CONFRM,SETN85)
SETN85: $STAB
ORNKEY(<PRIMARY>,PRI)
ORNKEY(<SECONDARY>,SEC)
$ETAB
SETN90: $KEY(CONFRM,SETN55)
SETN95: $NUMBER(CONFRM,^D10,<bytes per message size for the front end>)
>;END FTDN60
SUBTTL SET SCHEDULER command tables (TOPS20)
TOPS20 <
SETSCH: $KEYDSP(SETS10,<$DEFAULT(<BIAS-CONTROL>)>)
SETS10: $STAB
ORNDSP(SETS50,<BATCH-CLASS>,BAT)
ORNDSP(SETS20,<BIAS-CONTROL>,BIA)
ORNDSP(SETS40,<CLASS>,CLS)
$ETAB
SETS20: $NOISE(SETS30,<to>)
SETS30: $NUMBER(CONFRM,^D10,<<decimal number, a small number to favor interactive processes, larger number for compute-bound>>,<$ACTION(CHKVAL)>)
SETS40: $NOISE(SETS42,<number>)
SETS42: $NUMBER(SETS44,^D10,<scheduler class number>,<$ACTION(CHKVAL)>)
SETS44: $NOISE(SETS46,<to percent>)
SETS46: $NUMBER(CONFRM,^D10,<percent for this scheduler class (0-99)>,<$ACTION(CHKPER)>)
SETS50: $KEY(CONFRM,SETS52,<$ALTERNATE(SETS54)>)
SETS52: $STAB
ORNKEY(<BACKGROUND>,BCK)
ORNKEY(<NONE>,NON)
$ETAB
SETS54: $NUMBER(CONFRM,^D10,<scheduler class for batch>,<$ACTION(CHKVAL)>)
CHKPER: SKIPL T1,CR.RES(S2) ;CHECK THAT NUMBER
CAILE T1,^D100 ;TOO LARGE
SKIPA
$RETT ;RETURN
PUSHJ P,P$FIXP##
MOVEI S2,[ASCIZ/scheduler percent out of range/]
$RETF
>;END TOPS20
SUBTTL ENABLE/DISABLE command tables
ENAFDB: $KEYDSP (ENA001,<$DEFAULT(OUTPUT-DISPLAY)>)
ENA001: $STAB
TOPS20< ORNDSP(ENA050,<AUTOMATIC-VOLUME-RECOGNITION>,AVR)>
TOPS20< ORNDSP(ENACLS,<CLASS-SCHEDULER>,CLS)>
TOPS20< ORNDSP(CONFRM,<FILE-RETRIEVAL-WAITS>,RET)>
TOPS10< ORNDSP(ENAS00,<JOB-SCHEDULING>,JSC)>
ORNDSP(CONFRM,<LOGGING>,LGG)
ORNDSP(ENA100,<OUTPUT-DISPLAY>,OPD)
ORNDSP(ENA115,<QUEUES>,QUE)
TOPS10< ORNDSP(CONFRM,<STRUCTURE-RECOGNITION>,ASR)>
TOPS10< ORNDSP(CONFRM,<TIMESHARING>,TSR)>
TOPS10< ORNDSP(ENA050,<VOLUME-RECOGNITION>,AVR)>
$ETAB
ENA050: $NOISE(ENA065,<for>)
ENA065: $KEY(CONFRM,ENA070,<$ALTERNATE(ENA075)>)
ENA070: $STAB
TOPS10< ORNKEY(<DISK-DRIVES>,DSK)>
ORNKEY(<TAPE-DRIVES>,TAP)
$ETAB
TOPS20<
ENA075: $DEV(CONFRM,<$HELP(tape drive name),$FLAGS(CM%NSF)>)
>;END TOPS20
TOPS10<
ENA075: $DEV(CONFRM,<$HELP(<tape or disk drive name>),$FLAGS(CM%NSF)>)
>;END TOPS10
ENA100: $NOISE (ENA105,<of>)
ENA105: IFLE NUMAPL,<$KEY(ENA160,ENA110)>
IFG NUMAPL,<$KEY(ENA160,ENA110,<$ALTERNATE(ENA140)>)>
ENA110: $STAB
ORNKEY (<ALL-MESSAGES>,ALM)
ORNKEY (<BATCH-MESSAGES>,BAT)
ORNKEY (<CARD-PUNCH-MESSAGES>,CDP)
ORNKEY (<CARD-READER-INTERPRETER-MESSAGES>,BIN)
ORNKEY (<FAL-MESSAGES>,FAL)
ORNKEY (<MOUNT-MESSAGES>,MNT)
ORNKEY (<NQC-MESSAGES>,NQC)
ORNKEY (<PAPER-TAPE-PUNCH-MESSAGES>,PTP)
ORNKEY (<PLOTTER-MESSAGES>,PLT)
ORNKEY (<PRINTER-MESSAGES>,LPT)
ORNKEY (<READER-MESSAGES>,RDR)
ORNKEY (<USER-MESSAGES>,USR)
$ETAB
ENA115: $KEYDSP (ENA120,<$DEFAULT(<ALL-INPUT-OUTPUT>)>)
ENA120: $STAB
ORNDSP(CONFRM,<ALL-INPUT-OUTPUT>,ALL)
ORNDSP(CONFRM,<BATCH>,BAT)
ORNDSP(CONFRM,<CARD-PUNCH>,RDR)
ORNDSP(CONFRM,<PAPER-TAPE-PUNCH>,PTP)
ORNDSP(CONFRM,<PLOTTER>,PLT)
ORNDSP(CONFRM,<PRINTER>,LPT)
$ETAB
IFG NUMAPL,<
ENA140: $KEY(CONFRM,ENA150)
DEFINE X(A,B,C,D),<ORNKEY(<A'-MESSAGES>,<B>)>
ENA150: $STAB
TABAPL
$ETAB
>;END NUMAPL
ENA160: $SWITCH(NEXT(ENA160),ENA170,<$ACTION(SHRSWT),$ALTERNATE(CONFRM)>)
ENA170: $STAB
ORNSWI(<INFORMATION-MESSAGES>,OTH)
ORNSWI(<JOB-MESSAGES>,JOB)
ORNSWI(<OPR-ACTION-MESSAGES>,OAM)
$ETAB
SUBTTL ENACLS ENABLE CLASS SCHEDULER command tables
TOPS20 <
ENACLS: $SWITCH(,ENAC10,<$ALTERNATE(CONFRM),$ACTION(SHRSWT),$PREFILL(ENAACT)>)
ENAC10: $STAB
ORNSDP(ENAC30,<CLASS-ASSIGNMENTS:>,CAS)
ORNSDP(ENAC20,<WINDFALL:>,WFL)
$ETAB
ENAC20: $KEY(NEXT(ENAC10),ENAC25,<$DEFAULT(<ALLOCATED>)>)
ENAC25: $STAB
ORNKEY(<ALLOCATED>,ALO)
ORNKEY(<WITHHELD>,WHD)
$ETAB
ENAC30: $KEY(NEXT(ENAC10),ENAC35,<$DEFAULT(<ACCOUNT>)>)
ENAC35: $STAB
ORNKEY(ACCOUNT,ACT)
ORNKEY(<POLICY-PROGRAM>,PPR)
$ETAB
ENAACT: MOVE S1,CMDCOD ;GET THE COMMAND CODE
CAIE S1,.KYDIS ;WAS IT DISABLE?
$RETT ;NO..RETURN O.K.
MOVEI S1,CONFRM ;GET CONFRM ADDRESS
AOS S1 ;BUMP TO NEXT PDB
STORE S1,CR.PDB(S2),RHMASK ;RESET NEXT PDB
$RETT ;RETURN
>;END TOPS20
TOPS10 <
ENAS00: $NOISE(ENAS10,<on>)
ENAS10: $KEYDSP(ENAS20,<$ALTER(ENAS30)>)
ENAS20: $STAB
ORNDSP (CONFRM,<ALL-CPUs>,ACP)
ORNDSP (ENAS30,<ONLY>,NLY)
$ETAB
ENAS30: $FIELD (CONFRM,<cpu name>)
> ;END TOPS10
SUBTTL CLOSE command tables
SUBTTL DEFINE command tables
CLOFDB: $KEYDSP (CLO001,<$DEFAULT(<LOG>)>)
CLO001: $STAB
ORNDSP (SET902,LOG,LOG)
$ETAB
SUBTTL REPORT command tables
RPTFDB: $NOISE (RPT005,<by>)
RPT005: $FIELD (RPT015,<user name>)
RPT015: $DEV (RPT020,<$HELP(<device being reported>),$FLAGS(CM%PO!CM%NSF)>)
RPT020: $CRLF (<$ALTER(RPT025),$ACTION(TXTLIN##),$HELP(<confirm for multiple line response>)>)
RPT025: $CTEXT (CONFRM,<single line response>)
SUBTTL MOUNT command tables (TOPS10)
TOPS10<
MTNFDB: $KEY (MTN020,MTN010,<$DEFAULT(<STRUCTURE>)>)
MTN010: $STAB
ORNKEY (<STRUCTURE>,STR)
$ETAB
MTN020: $DEV (MTN030,<$HELP(<structure name>),$FLAGS(CM%PO!CM%NSF)>)
MTN030: $NOISE (MTN040,<as>)
MTN040: $DEV (MTN050,<$HELP(<alias name>),$ALTERNATE(MTN050),$FLAGS(CM%NSF!CM%PO)>)
MTN050: $SWITCH (,MTN060,<$ALTERNATE(<CONFRM>),$ACTION(SHRSWT)>)
MTN060: $STAB
ORNSDP (NEXT,<OVERRIDE-SET-NUMBER>,OSN)
ORNSDP (NEXT,<WRITE-LOCKED>,WLK)
$ETAB
>;END TOPS10
SUBTTL NEXT - NEXT COMMAND
NXTFDB: $NOISE (NXT010,<job on>) ;[NXT]
NXT010: $KEYDSP(NXT020) ;[NXT]
NXT020: $STAB ;[NXT]
ORNDSP(NXT040,BATCH-STREAM,BAT) ;[NXT]
ORNDSP(NXT030,CARD-PUNCH,CDP) ;[NXT]
ORNDSP(NXT030,NQC-STREAM,NQC) ;[NXT]
ORNDSP(NXT030,PAPER-TAPE-PUNCH,PTP) ;[NXT]
ORNDSP(NXT030,PLOTTER,PLT) ;[NXT]
ORNDSP(NXT030,PRINTER,LPT) ;[NXT]
$ETAB ;[NXT]
NXT030: $NOISE (NXT050,<unit number>) ;[NXT]
NXT040: $NOISE (NXT050,<stream number>) ;[NXT]
NXT050: $NUMBER (NXT080,^D10,<number (/NODE:)>,<$ACTION(STOBTH),>) ;[NXT]
NXT080: $SWITCH (NXT090,NXT085,<$DEFAULT(<REQUEST-ID>),$ALTER(NXT100)>) ;[NXT]
NXT085: $STAB ;[NXT]
ORNSWI(NODE:,NOD) ;[NXT]
$ETAB ;[NXT]
NXT090: $NODNM (NXT100,<node name>,<$FLAGS(CM%PO!CM%NSF)>) ;[NXT]
NXT100: $KEYDSP (NXT110,<$DEFAULT(<REQUEST-ID>)>) ;[NXT]
NXT110: $STAB ;[NXT]
ORNDSP(NXT120,<REQUEST-ID>,RQN) ;[NXT]
$ETAB ;[NXT]
NXT120: $NUMBER(CONFRM,^D10,<request number of the next job to schedule>,<$ACTION(CHKPOS)>) ;[NXT]
SUBTTL IDENTIFY command tables
TOPS20 <
IDNFDB: $NOISE(IDN010,<tape on drive>)>
TOPS10 <
IDNFDB: $NOISE(IDN010,<device>)>
TOPS20 <
IDN010: $DEV(IDN020,<$HELP(<tape drive name>),$FLAGS(CM%NSF)>)>
TOPS10 <
IDN010: $DEV(IDN020,<$HELP(<device name>),$FLAGS(CM%NSF)>)>
IDN020: $NOISE(IDN030,<with>)
IDN030: $KEYDSP(IDN040,<$DEFAULT(<REQUEST-ID>)>)
IDN040: $STAB
ORNDSP(IDN050,<REQUEST-ID>,RQN)
TOPS20< ORNDSP(CONFRM,<SCRATCH>,SCR) > ;ONLY VALID ON TOPS20
ORNDSP(IDN060,<VOLUME-ID>,VID)
$ETAB
IDN050: $NUMBER(CONFRM,^D10,<request number of the mount request>,<$ACTION(CHKPOS)>)
IDN060: $QUOTE(CONFRM,<volume-id in quotes if has non-alphanumeric characters>,<$ALTERNATE(IDN070)>)
IDN070: $FIELD(CONFRM,<volume-id without quotes>)
SUBTTL SWITCH command tables (TOPS20)
TOPS20 <
SWIFDB: $NOISE(SWI010,<request number>)
SWI010: $NUMBER(SWI020,^D10,<request number of the mount request to switch>)
SWI020: $NOISE(SWI030,<to new volume>)
SWI030: $QUOTE(SWI050,<volume-id in quotes if has non-alphanumeric characters>,<$ALTERNATE(SWI040)>)
SWI040: $FIELD(SWI050,<volume-id without quotes>)
SWI050: $NOISE(SWI060,<on drive>)
SWI060: $DEV(CONFRM,<$HELP(<tape drive to switch request to>),$ALTERNATE(CONFRM),$FLAGS(CM%NSF)>)
>;END TOPS20
SUBTTL DISMOUNT command tables
DSMFDB:$KEYDSP(DSM010)
DSM010: $STAB
ORNDSP(DSM020,<STRUCTURE>,STR)
ORNDSP(DSM030,<TAPE-DRIVE>,TAP)
$ETAB
TOPS10 <
DSM020: $DEV (DSM040,<$HELP(<structure name to dismount>),$FLAGS(CM%NSF!CM%PO)>)
> ;End TOPS10
TOPS20 <
DSM020: $DEV (CONFRM,<$HELP(<structure name to dismount>),$FLAGS(CM%NSF)>)
> ;End TOPS20
DSM030: $DEV (CONFRM,<$HELP(<tape drive from which to dismount tape>),$FLAGS(CM%NSF)>)
TOPS10 <
DSM040: $SWITCH(,DSM050,<$ACTION(SHRSWT),$ALTERNATE(CONFRM)>)
DSM050: $STAB
ORNSDP(NEXT(DSM040),<NOCHECK>,NCK)
ORNSDP(NEXT(DSM040),<REMOVE>,REM)
$ETAB
> ;End TOPS10
comment \
;removed on July 11,1979
SUBTTL UNLOAD command tables (removed)
UNLFDB: $NOISE(UNL010,<tape drive>)
UNL010: $DEV (CONFRM,<$HELP(<tape drive to unload>),$FLAGS(CM%NSF)>)
; UNDEFINED FOR NOW
\;end of comment
SUBTTL RECOGNIZE command tables
TOPS10 <
RECFDB: $NOISE(REC010,<labels on>)
REC010: $DEV (CONFRM,<$HELP(<tape or disk drive to recognize>),$FLAGS(CM%NSF!CM%PO)>)
>;END TOPS10
SUBTTL PUSH command tables
PUSFDB::TOPS10 <$NOISE (PUS100,<to monitor level>)>
TOPS20 <$NOISE (PUS100,<to EXEC level>)>
PUS100: $CRLF (<$ACTION(PUSHRT##)>)
SUBTTL HELP command tables
ND CR.ADR,4 ;Address of current argument
HLPFDB:: $NOISE (HLPFD1,<with>)
HLPFD1: $CTEXT(,<command>,<$ACTION(HLPACT),$DEFAULT(HELP)>)
HLPACT: MOVE T1,CR.ADR(S2) ;Get the data
HRROI T1,ARG.DA(T1) ;Point to the string
$CALL SETOUT## ;Setup proper $TEXT defaults
MOVEI S1,HLPFD ;Point to help file
MOVE S2,T1 ;Point to string
$CALL P$HELP##
$CALL SNDOUT## ;Send the output
$CALL P$NPRO## ;Mark no processing
$RETT ;Return
;File descriptor for help file for OPR
TOPS20 <
HLPFD: XWD HSIZ,0
ASCIZ /HLP:OPR.HLP/
HSIZ==.-HLPFD
>
TOPS10 <
HLPFD: $BUILD FDMSIZ
$SET(.FDLEN,FD.LEN,FDMSIZ)
$SET(.FDSTR,,<SIXBIT/HLP/>)
$SET(.FDNAM,,<SIXBIT/OPR/>)
$SET(.FDEXT,,<SIXBIT/HLP/>)
$EOB
>
SUBTTL SHOW ALLOCATION command tables
TOPS10<
ALC000: $KEYDSP (ALC010)
ALC010: $STAB
ORNDSP (CONFRM,<ALL-REQUESTS>,ALL)
ORNDSP (ALC020,<BATCH-REQUEST>,BRQ)
ORNDSP (ALC030,JOB,JOB)
$ETAB
ALC020: $NUMBER (CONFRM,^D10,<request-id for batch job>,<$ALTERNATE(ALC040)>)
ALC030: $NUMBER (CONFRM,^D10,<job number>)
ALC040: $CRLF ($HELP(<confirm for all batch requests>))
>;END TOPS10
END