Trailing-Edge
-
PDP-10 Archives
-
BB-KL11K-BM_1990
-
t20src/mxnrch.r36
There are 13 other files named mxnrch.r36 in the archive. Click here to see a list.
! COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1985, 1989.
! ALL RIGHTS RESERVED.
!
! THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
! ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
! INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
! COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
! OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
! TRANSFERRED.
!
! THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
! AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
! CORPORATION.
!
! DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
! SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
!++
! FACILITY: LSG DECnet Network Management
!
! ABSTRACT:
!
! Contains architectural declarations required by
! Network Management.
!
! ENVIRONMENT: Bliss-36, Bliss-32 and Bliss-16.
!
! AUTHOR: Dale C. Gunn , CREATION DATE: 29-Aug-80
!
!--
!
! Network Management DECnet object codes
!
literal
NICE_OBJECT = 19,
MIRROR_OBJECT = 25,
EVENT_OBJECT = 26;
!
! NICE Function Code Definitions
!
literal
LOAD_ = 15, ! NICE Request Down-line Load Function
DUMP_ = 16, ! NICE Request Up-line Dump Function
TRIGGER_ = 17, ! NICE Trigger Bootstrap Function
TEST_ = 18, ! NICE Test Function
LOOP_ = TEST_, ! NICE Test Function
CHANGE_ = 19, ! NICE Change Parameter Function
PURGE_ = CHANGE_, ! NICE Change Parameter Function
SET_ = CHANGE_, ! NICE Change Parameter Function
CLEAR_ = CHANGE_, ! NICE Change Parameter Function
DEFINE_ = CHANGE_, ! NICE Change Parameter Function
READ_ = 20, ! NICE Read Information Function
LIST_ = READ_, ! NICE Read Information Function
SHOW_ = READ_, ! NICE Read Information Function
ZERO_ = 21, ! NICE Zero Counters Function
SYSTEM_SPECIFIC_ = 22; ! NICE System Specific Function
! NICE Read Information Type Codes
literal
SUMMARY_ = 0, ! Read Summary Parameters
STATUS_ = 1, ! Read Status Parameters
CHARACTERISTICS_ = 2, ! Read Characteristic Parameters
COUNTERS_ = 3, ! Read Counters
EVENTS_ = 4, ! Read Event Logging Status
STATE_ = 5, ! Read Circuit State Parameter
QUALIFIER_ = -1, ! (for parameter applicability)
INFORMATION_LO = min (SUMMARY_,STATUS_,CHARACTERISTICS_,COUNTERS_,
EVENTS_,QUALIFIER_),
INFORMATION_HI = max (SUMMARY_,STATUS_,CHARACTERISTICS_,COUNTERS_,
EVENTS_,QUALIFIER_);
! NICE System Type Codes
literal
RSTS_ = 1, ! RSTS Specific
RSX_ = 2, ! RSX Family Specific
TOPS20_ = 3, ! TOPS-10/20 Specific
VMS_ = 4; ! VAX/VMS Specific
! NICE Entity Type Codes
literal
ENTITY_NODE = 0, ! NODE Entity
ENTITY_LINE = 1, ! LINE Entity
ENTITY_LOGGING = 2, ! EVENT LOGGING Entity
ENTITY_CIRCUIT = 3, ! CIRCUIT Entity
ENTITY_MODULE = 4, ! MODULE Entity
ENTITY_AREA = 5, ! AREA Entity
NO_ENTITY_ = -1, ! none
NODE_E = ENTITY_NODE, ! NODE Entity (To be obsoleted)
LINE_ = ENTITY_LINE, ! LINE Entity (To be obsoleted)
LOGGING_ = ENTITY_LOGGING, ! EVENT LOGGING Entity (To be obsoleted)
CIRCUIT_ = ENTITY_CIRCUIT, ! CIRCUIT Entity (To be obsoleted)
MODULE_ = ENTITY_MODULE, ! MODULE Entity (To be obsoleted)
AREA_ = ENTITY_AREA, ! AREA Entity (To be obsoleted)
ENTITY_LO = min (ENTITY_NODE, ENTITY_LINE, ENTITY_LOGGING, ENTITY_CIRCUIT,
ENTITY_MODULE, ENTITY_AREA),
ENTITY_HI = max (ENTITY_NODE, ENTITY_LINE, ENTITY_LOGGING, ENTITY_CIRCUIT,
ENTITY_MODULE, ENTITY_AREA),
EVENT_ENTITY_BASE = ENTITY_HI + 1; ! Base for the "faked" event entities
macro
!
! The list of entities and their subentites
!
$NML$ENTITY_SET =
NODE, LINE, LOGGING, CIRCUIT, AREA,
(MODULE, $NML$MODULE_SUBENTITY_SET),
EVENT_ENTITY_SET %,
!
! The list of all module subentites
!
$NML$MODULE_SUBENTITY_SET =
X25_SERVER, X25_PROTOCOL, X25_ACCESS, CONSOLE, LOADER, LOOPER, CONFIGURATOR %,
!
! The list of all module subentity strings ("-" and "_")
!
$NML$MODULE_SUBENTITY_STRINGS =
'X25-SERVER', 'X25_SERVER',
'X25-PROTOCOL', 'X25_PROTOCOL',
'X25-ACCESS', 'X25_ACCESS',
'CONSOLE', 'CONSOLE',
'LOADER', 'LOADER',
'LOOPER', 'LOOPER',
'CONFIGURATOR', 'CONFIGURATOR'
%,
!
! A macro to construct full entity names from the entity list
! i.e., NODE, MODULE_CONFIGURATOR.
!
$NML$ENTITIES [LST] =
%if %identical (LST, (%remove (LST)))
%then $NML$ENTITY (%remove (LST))
%else %string (LST)
%fi %,
$NML$ENTITY (NAME) [SUB] =
%string (NAME,'_',SUB) %;
!
! NICE subentity definitions & codes
!
! Field & structure definition for full entity type code
$field ENTITY_SUBFIELDS =
set
ENTITY_MAIN = [$short_integer],
ENTITY_SUB = [$short_integer]
tes;
literal
ENTITY_SUB_SIZE = $field_set_size;
macro
FULL_ENTITY =
block [ENTITY_SUB_SIZE] field (ENTITY_SUBFIELDS) %;
macro
!
! This macro is to define all the module subentity types
! like MODULE_X25_ACCESS
!
$NML$SUB_TYPES_DEF [X] =
%name ('MODULE_', X) = $distinct %,
!
! This macro is to get a list of the module subentity types
!
$NML$SUB_TYPES_LIST [X] =
%name ('MODULE_', X) %,
!
! This macro is to define the full entity types for the module subentities
! like ENTITY_MODULE_X25_ACCESS
!
$NML$SUB_FULL_DEF [X] =
%name ('ENTITY_MODULE_', X) =
ENTITY_MODULE or %name ('MODULE_', X) ^ 18 %;
! Define all the subentity constants
$literal
NO_SUB_ENTITY = 0,
$NML$SUB_TYPES_DEF ($NML$MODULE_SUBENTITY_SET),
MODULE_LO = min ($NML$SUB_TYPES_LIST ($NML$MODULE_SUBENTITY_SET)),
MODULE_HI = max ($NML$SUB_TYPES_LIST ($NML$MODULE_SUBENTITY_SET)),
$NML$SUB_FULL_DEF ($NML$MODULE_SUBENTITY_SET);
! Define EVENT entities
!
! The reason for these "faked" or "system-specific" entities is the
! following:
!
! The event parameters are based on event classes; for network management
! (class 0) there is a set of event parameters numbered 0,1,2,....; for
! session control (class 2) there is another set of event parameters also
! numbered starting by 0.
!
! Except for the "qualification" of the event parameters, are they very
! similar to "ordinary" parameters. They have the same display format;
! (they may never be set though).
!
! Therefore, to simplify the formatting of event parameters for the console
! logger in NMLEVL, a set of "event entities" is added on top of the NML
! entities. This will make them expand into the parameter database in NMLPRM,
! so NCPRSP will have access to them when displaying event parameters.
!
! NICE messages should of course never contain entities outside the NML
! range, and that should be checked for, so there should not be any overlap.
macro
EVENT_ENTITY_SET =
EVENT_0, ! NML layer
EVENT_2, ! Session
EVENT_3, ! End communications
EVENT_4, ! Routing
EVENT_5, ! Data link layer
EVENT_6, ! Physical link layer
EVENT_96 %; ! LCG specific events
literal
ENTITY_EVENT_0 = EVENT_ENTITY_BASE + 0, ! NML layer
ENTITY_EVENT_2 = EVENT_ENTITY_BASE + 2, ! Session control
ENTITY_EVENT_3 = EVENT_ENTITY_BASE + 3, ! End communications
ENTITY_EVENT_4 = EVENT_ENTITY_BASE + 4, ! Routing
ENTITY_EVENT_5 = EVENT_ENTITY_BASE + 5, ! Data link layer
ENTITY_EVENT_6 = EVENT_ENTITY_BASE + 6, ! Physical link layer
ENTITY_EVENT_96 = EVENT_ENTITY_BASE + 96; ! LCG specific events
! NICE Entity Group Codes
literal
SIGNIFICANT_ = -5, ! SIGNIFICANT Entities
ADJACENT_ = -4, ! ADJACENT Entities
LOOPED_ = -3, ! LOOPED Entities
ACTIVE_ = -2, ! ACTIVE Entities
KNOWN_ = -1; ! KNOWN Entities
! NICE Logging sink type values
literal
CONSOLE_ = 1,
FILE_ = 2,
MONITOR_ = 3,
LOGGING_LO = min (CONSOLE_,FILE_,MONITOR_),
LOGGING_HI = max (CONSOLE_,FILE_,MONITOR_);
! NICE type/class word fields
macro
$$EVENT_TYPE = 0, 5, 0 %, ! Event type
$$EVENT_CLASS = 6, 9, 0 %; ! Event class
! NICE option byte field definitions
$field ZERO_OPTIONS =
set
ZO_ENTITY_TYPE = [$bits(3)], ! NICE entity type number
ZO_RESERVED = [$bits(4)], ! Reserved bits, must be zero
ZO_READ_AND_ZERO = [$bit] ! Zero only or read and zero flag
tes;
$field READ_OPTIONS =
set
RO_ENTITY_TYPE = [$bits(3)], ! NICE entity type number
RO_RESERVED = [$bit], ! Reserved bits, must be zero
RO_INFO_TYPE = [$bits(3)], ! Type of information to read
RO_PERMANENT = [$bit] ! PERMANENT vs VOLATILE flag
tes;
$field CHANGE_OPTIONS =
set
CO_ENTITY_TYPE = [$bits(3)], ! NICE entity type number
CO_RESERVED = [$bits(3)], ! Reserved bits, must be zero
CO_FUNCTION_DATA = [$bits(2)],
$overlay (CO_FUNCTION_DATA)
CO_CLEAR_PURGE = [$bit], ! CLEAR/PURGE vs SET/DEFINE flag
CO_PERMANENT = [$bit] ! PERMANENT vs VOLATILE flag
$continue
tes;
$field TEST_OPTIONS =
set
TO_ENTITY_TYPE = [$bits(3)], ! NICE entity type number
TO_RESERVED = [$bits(4)], ! Reserved bits, must be zero
TO_ACCESS_CONTROL = [$bit] ! Access control included flag
tes;
$field BOOT_OPTIONS =
set
BO_ENTITY_TYPE = [$bits(3)], ! NICE entity type number
BO_RESERVED = [$bits(5)] ! Reserved bits, must be zero
tes;
$field LOAD_OPTIONS =
set
LO_ENTITY_TYPE = [$bits(3)], ! NICE entity type number
LO_RESERVED = [$bits(5)] ! Reserved bits, must be zero
tes;
$field DUMP_OPTIONS =
set
DO_ENTITY_TYPE = [$bits(3)], ! NICE entity type number
DO_RESERVED = [$bits(5)] ! Reserved bits, must be zero
tes;
! NICE response parameter field definitions
$field DATA_ID_FIELDS =
set
DI_PARMNO = [$bits(12)], ! Parameter type number
$overlay (DI_PARMNO) ! ...or...
DI_CNTRNO = [$bits(12)], ! Counter type number
$continue
DI_MAPPED = [$bit], ! Counter bit map flag
DI_WIDTH = [$bits(2)], ! Counter width
DI_TYPE = [$bit] ! Type of data, counter or parameter
tes;
$field DATA_TYPE_FIELDS =
set
DT_NUMBER = [$bits(6)], ! Number of bytes or fields
$overlay(DT_NUMBER) ! ...or...
DT_LENGTH = [$bits(4)], ! Length of binary number
DT_FORMAT = [$bits(2)], ! Format of number
$continue
DT_FIELDS = [$bit], ! Single or multiple fields
$overlay(DT_FIELDS) ! ...or...
DT_FTYPE = [$bit], ! Field type, ASCII or binary number
$continue
DT_CODED = [$bit] ! Coded or not coded
tes;
%sbttl 'NICE Message Codes, Values, and Text Strings'
macro
$NML$NICE_RETURNS =
SUC, 1, '', ! Success
ACC, 2, '', ! Request accepted
MOR, 3, '', ! Partial reply
DON, -128, '' %; ! Done, end of multiple response
macro
$NML$NICE_ERRORS =
UFO, -1, 'Unrecognized function or option',
IMF, -2, 'Invalid message format',
PRV, -3, 'Privilege violation',
OCM, -4, 'Oversized Management command message',
MPE, -5, 'Management program error',
UPT, -6, 'Unrecognized parameter type',
IMV, -7, 'Incompatible Management version',
URC, -8, 'Unrecognized component',
IID, -9, 'Invalid identification',
LCE, -10, 'Line communication error',
CWS, -11, 'Component in wrong state',
FOE, -13, 'File open error',
IFC, -14, 'Invalid file contents',
REE, -15, 'Resource error',
IPV, -16, 'Invalid parameter value',
LPE, -17, 'Line protocol error',
FIO, -18, 'File I/O error',
MLD, -19, 'Mirror link disconnected',
NRE, -20, 'No room for new entry',
MCF, -21, 'Mirror connect failed',
PNA, -22, 'Parameter not applicable',
PVL, -23, 'Parameter value too long',
HWF, -24, 'Hardware failure',
OPF, -25, 'Operation failure',
SFS, -26, 'System-specific Management function not supported',
IPG, -27, 'Invalid parameter grouping',
BLR, -28, 'Bad loopback response',
PAM, -29, 'Parameter missing',
BMR, -100, 'Bad management response',
LLD, -101, 'Listener link disconnected',
LCF, -102, 'Listener link connect failed',
OMR, -103, 'Oversized Management response' %;
!
! Macro to build individual error macros from $NML$NICE_ERRORS
!
compiletime %TEMP = 0;
macro
$NML$NICERR_MACRO [MNE,VAL,STR] =
%assign(%TEMP,VAL)
%quote literal %name('NICE$_',MNE) = VAL %quote ;
%if %TEMP GEQ 0
%then %print('NICE$_',MNE,' = ',%number(%TEMP),'; !',STR)
%else %print('NICE$_',MNE,' = -',%assign(%TEMP,-%TEMP),%number(%TEMP),'; ! ',STR)
%fi
%quote macro %name('$NICE$ERR_',MNE) =
VAL
%quote %print (STR) %quote % %;
!
! Macro to build an index table of text string pointers
!
macro
$NICE$ERR_CASES [MNE,VAL,STR] =
%assign(%TEMP,VAL)
%if %TEMP GEQ 0
%then %print ('[',%number(%TEMP),']: CH$ASCIC(',STR,');')
%else %print ('[-',%assign(%TEMP,-%TEMP),%number(%TEMP),']: CH$ASCIC(',STR,');')
%fi
[VAL]: CH$ASCIC(%remove(STR)) %;
!
! Equated symbols
!
$NML$NICERR_MACRO ($NML$NICE_ERRORS);
$NML$NICERR_MACRO ($NML$NICE_RETURNS);
%sbttl 'Session Control Codes, Values, and Text Strings'
macro
$SC_ERRORS =
NSE, 0, 'No special error',
RAF, 1, 'Resource allocation failure',
DND, 2, 'Destination node does not exist',
NSD, 3, 'Node shutting down',
DPD, 4, 'Destination process does not exist',
INF, 5, 'Invalid name field',
DPQ, 6, 'Destination process queue overflow',
USE, 7, 'Unspecified error',
THA, 8, 'Third party aborted the logical link',
UAB, 9, 'User abort (asynchronous disconnect)',
UEC, 11, 'Undefined error code',
CII, 21, 'Connect initiate (CI) with illegal destination address',
FCV, 24, 'Flow control violation',
TMN, 32, 'Too many connections to node',
TMP, 33, 'Too many connections to destination process',
ANP, 34, 'Access not permitted',
LLS, 35, 'Logical link services mismatch',
IAC, 36, 'Invalid account',
SSS, 37, 'Segment size too small',
PAB, 38, 'Process aborted',
NPN, 39, 'No path to destination node',
LAB, 40, 'Link aborted due to data loss',
DLL, 41, 'Destination logical link address does not exist',
CDI, 42, 'Confimation of disconnect initiate (DI)',
IDF, 43, 'Image data field too long' %;
!
! Macro to build individual error macros from $SC_ERRORS
!
compiletime %TEMP1 = 0;
macro
$SCERR_MACRO [MNE,VAL,STR] =
%assign(%TEMP1,VAL)
%quote literal %name('SC$_',MNE) = VAL %quote ;
%if %TEMP1 GEQ 0
%then %print('SC$_',MNE,' = ',%number(%TEMP1),'; ! ',STR)
%else %print('SC$_',MNE,' = -',%assign(%TEMP1,-%TEMP1),%number(%TEMP1),'; ! ',STR)
%fi
%quote macro %name('$SC$ERR_',MNE) =
VAL
%quote %print (STR) %quote % %;
!
! Macro to build an index table of text string pointers
!
macro
$SC$ERR_CASES [MNE,VAL,STR] =
%assign(%TEMP1,VAL)
%if %TEMP1 GEQ 0
%then %print ('[',%number(%TEMP1),']: CH$ASCIC(',STR,');')
%else %print ('[-',%assign(%TEMP1,-%TEMP1),%number(%TEMP1),']: CH$ASCIC(',STR,');')
%fi
[VAL]: CH$ASCIC(%remove(STR)) %;
!
! Equated symbols
!
$SCERR_MACRO ($SC_ERRORS);
!
! Other error detail texts
!
macro
$LINK_DETAIL_ERRORS =
, 0, 'No node name set',
, 1, 'Invalid node name format',
, 2, 'Unrecognized node name',
, 3, 'Node unreachable',
, 4, 'Network resources',
, 5, 'Rejected by object',
, 6, 'Invalid object name format',
, 7, 'Unrecognized object',
, 8, 'Access control rejected',
, 9, 'Object too busy',
,10, 'No response from object',
,11, 'Remote node shut down',
,12, 'Node or object failed',
,13, 'Disconnect by object',
,14, 'Abort by object',
,15, 'Abort by management',
,16, 'Local node shut down' %,
$FILE_DETAIL_ERRORS =
, 0, 'Permanent Database',
, 1, 'Load File',
, 2, 'Dump File',
, 3, 'Secondary Loader',
, 4, 'Tertiary Loader',
, 5, 'Secondary Dumper',
, 6, 'Volatile Database' %;
%sbttl 'MOP Function Codes'
literal
LOAD_WITH_TRANSFER = 0,
DUMP_COMPLETE = 1,
LOAD_WITHOUT_TRANSFER = 2,
ASSISTANCE_VOLUNTEER = 3,
REQUEST_DUMP = 4,
ENTER_MOP_MODE = 6,
REQUEST_PROGRAM = 8,
REQUEST_MEMORY_LOAD = 10,
MOP_MODE_RUNNING = 12,
REQUEST_DUMP_SERVICE = 12,
MEMORY_DUMP_DATA = 14,
DAP_MESSAGE_ENVELOPE = 16,
ENTER_ASCII_TTY_MODE = 18,
PARAMETERS_WITH_TRANSFER = 20,
CHK11_ASCII_TEXT = 22,
LOOPBACK_TEST = 24,
LOOPED_DATA = 26;
literal ! Starting image load types
SECONDARY_LOADER = 0,
TERTIARY_LOADER = 1,
SYSTEM_IMAGE = 2;
literal ! CPU type codes
CPU_PDP8 = 0,
CPU_PDP11 = 1,
CPU_DEC1020 = 2,
CPU_VAX = 3;
%sbttl 'NICE Entity Parameter Tables'
! Each entry of the following NICE entity parameter table has the following
! format:
!
! (PARAMETER NUMBER,
! LITERAL NAME,
! DATA TYPE,
! LAYER APPLICABILITY,
! (reserved),
! INFORMATION TYPE,
! APPLICABILITY RESTRICTION,
! SETTABILITY RESTRICTION,
! APPLICABLE VERSIONS,
! CODED FIELD TEXT MAPPINGS)
!
! PARAMETER NUMBER
! As defined in the Network Management Architecture Specification
! document. All parameter numbers are decimal, except specified otherwise.
!
! LITERAL NAME
! The literal representation of a parameter from the NCP keywords column
! of the architecture tables, represented as capitalized lower case text.
!
! DATA TYPE
! The data format notations for extracting data from the request NICE
! messages obtained from the data type field of the architecture tables.
!
! These can be either simple data types of the form:
! (C,n) C-n Coded, single field, n bytes
! (AI,n) AI-n ASCII image field, maximum n bytes
! (DU,n) DU-n Decimal number, unsigned, n bytes
! (DS,n) DS-n Decimal number, signed, n bytes
! (H,n) H-n Hexadecimal number, n bytes
! (HI,n) HI-n Hexadecimal image, maximum n bytes
! (O,n) O-n Octal number, n bytes
!
! or complex data types:
! CM2 CM-2 Coded, multiple (2) fields, 2 bytes each
! ((DU,2),(DU,2))
! CME CM-4 Coded, multiple (4) fields, EVENTS format
! ((C,1),{((DU,2),(AI,6)),(AI,16)},(C,2),(HI,8))
! CMN CM-2 Coded, multiple (2) fields, NODE format
! ((DU,2),(AI,6))
! CMO CM-2 Coded, multiple (2) fields, OBJECT format
! ((DU,1),(AI,16))
! CMU CM-2 Coded, multiple (2) fields, USER format
! ((C,1),{((DU,2),(AI,6)),(AI,16)})
! CMV CM-3 Coded, multiple (3) fields, VERSION format
! ((DU,1),(DU,1),(DU,1))
! CMF CM-16 Coded multiple (16) fields, FUNCTION format
! ((C,1),((C,1)),((C,1)),((C,1)),((C,1)),((C,1)),
! ((C,1)),((C,1)),((C,1)),((C,1)),((C,1)),((C,1)),
! ((C,1)),((C,1)),((C,1)),((C,1)))
! CML CM-5 Coded, multiple (5) fields, LAST REPORT format
! ((DU,1),(C,1),(DU,1),(DU,1),(DU,1))
! CMT CM-3 Coded, multiple (3) fields, ELAPSED TIME format
! ((DU,2),(DU,1),(DU,2))
! CMS CM-2 Coded, multiple (2) fields, Software Identification format
! ((C,1),(AI,16))
$literal
CM2 = $distinct, ! Coded 2 2-bytes
CME = $distinct, ! Coded Event
CMN = $distinct, ! Coded Node
CMO = $distinct, ! Coded Object
CMU = $distinct, ! Coded User/Owner
CMV = $distinct, ! Coded Version
CMF = $distinct, ! Coded Function
CML = $distinct, ! Coded Last Report
CMT = $distinct, ! Coded Elapsed Time
CMS = $distinct, ! Coded Software Identification
CMDC = $distinct; ! 'Dont care' (used by events)
! LAYER APPLICABILITY
! Contains applicability information for NML. Multiple values must
! be enclosed in parenthesis.
!
! NML indicates that the parameter is maintained by the
! NML layer; if not spcified, parameter is maintained
! by one of the lower layers.
! RO indicates that parameter cannot be set via NICE.
!
! (reserved entry)
! This was historically the Data Type field entry, but is now replaced
! by information in the DATA TYPE field.
!
! INFORMATION TYPE
! The information type notation as specified by the Network Management
! Architecture specification. Multiple values must be enclosed in
! parenthesis.
!
! C Characteristics
! S Status
! * Summary
! EV Events
! Q Qualifier
!
! APPLICABILITY RESTRICTION
! The applicability restriction field from the Network Management
! Architecture specification. Multiple values must be enclosed in
! parenthesis.
!
! A Adjacent node only
! DN Destination node only (includes executor)
! E Executor node only
! N Node by name only
! L Loop nodes
! R Remote nodes (all nodes except executor and loop nodes)
! S Sink node only
! Q Indicates a parameter must be qualified
!
! SETTABILITY RESTRICTION
! The setability restriction field from the Network Management
! Architecture specification. Multiple values must be enclosed in
! parenthesis.
!
! RO Read Only
! WO Write Only
! LO Loop Only
!
! The following information is also supplied in this field:
!
! C Clearable parameter
! U Convert to upper case
! P Password parameter
!
! APPLICABLE VERSIONS
! The Network Management version number(s) for which this parameter
! definition is valid. If left null, the definition applies to all
! versions. Multiple versions must be enclosed in parenthesis.
!
! CODED FIELD TEXT MAPPINGS
! This field provides a single set of mappings from numeric values to
! text strings. It is provided for C-1 and CM-n fields which contain
! a C-1 field, but will not handle multiple C-n mappings.
! The mappings are obtained from the tables following the entity
! parameter tables as defined in the Network Management Architecture
! Specification, and are of the form:
!
! (mapping, mapping, ...)
!
! mapping := (value, 'text')
!
! The values must be provided in ascending order.
!
! This entry should be replaced when a more satisfactory solution to
! multiple mappings can be found.
%sbttl 'AREA Parameter Table'
macro
$NML$AREA_PARMS =
(000, 'State', (C,1),,, (S,'*'),, RO, 4,
((4, 'Reachable'),
(5, 'Unreachable'))),
(820, 'Cost', (DU,2),,, S,, RO, 4),
(821, 'Hops', (DU,1),,, S,, RO, 4),
(822, 'Circuit', (AI,16),,, (S,'*'),, RO, 4),
(830, 'Next Node', CMN,,, (S,'*'),, RO, 4) %;
%sbttl 'NODE Parameter Table'
macro
$NML$NODE_PARMS =
(000, 'State', (C,1),,, (S,'*'), (E,R),,,
((0, 'On'),
(1, 'Off'),
(2, 'Shut'),
(3, 'Restricted'),
(4, 'Reachable'),
(5, 'Unreachable'))),
(010, 'Physical Address', (HI,6), NML,, S, E, RO, 4),
(100, 'Identification', (AI,32), NML,, (C,'*'), E, C),
(101, 'Management Version', CMV, NML,, C, E, RO),
(110, 'Service Circuit', (AI,16), NML,, C, A, (C,U)),
(111, 'Service Password', (H,8), NML,, C, A, C),
(112, 'Service Device', (C,1), NML,, C, A, C,,
((0, 'DP'), (1, 'UNA'),
(2, 'DU'), (3, 'CNA'), (4, 'DL'),
(5, 'QNA'), (6, 'DQ'), (7, 'CI'),
(8, 'DA'), (9, 'PCL'), (10, 'DUP'),
(12, 'DMC'), (14, 'DN'), (15, 'NI'),
(16, 'DLV'), (18, 'DMP'), (20, 'DTE'),
(22, 'DV'), (24, 'DZ'),
(28, 'KDP'), (30, 'KDZ'),
(32, 'KL'), (34, 'DMV'),
(36, 'DPV'), (38, 'DMF'),
(40, 'DMR'), (42, 'KMY'), (44, 'KMX'))),
(113, 'CPU', (C,1), NML,, C, A, C,,
((0, 'PDP8'),
(1, 'PDP11'),
(2, 'DECSYSTEM1020'),
(4, 'VAX'))),
(114, 'Hardware Address', (HI,6), NML,, C, A, C, 4),
(115, 'Service Node Version', (C,1), NML,, C, A, C, 4),
(120, 'Load File', (AI,255), NML,, C, A, (C,U)),
(121, 'Secondary Loader', (AI,255), NML,, C, A, (C,U)),
(122, 'Tertiary Loader', (AI,255), NML,, C, A, (C,U)),
(123, 'Diagnostic File', (AI,255), NML,, C, A, (C,U), 4),
(125, 'Software Type', (C,1), NML,, C, A, C,,
((0, 'Secondary Loader'),
(1, 'Tertiary Loader'),
(2, 'System'))),
(126, 'Software Identification', (AI,16), NML,, C, A, C),
(130, 'Dump File', (AI,255), NML,, C, A, (C,U)),
(131, 'Secondary Dumper', (AI,255), NML,, C, A, (C,U)),
(135, 'Dump Address', (O,4), (NML,RO),, C, A),
(136, 'Dump Count', (DU,4), (NML,RO),, C, A),
(140, 'Host', CMN, NML,, C, (A,E), RO),
(141, 'Host', CMN, NML,, C, (A,E), (WO, C)),
(150, 'Loop Count', (DU,2), NML,, C, E, RO, 3),
(150, 'Loop Count', (DU,2), NML,, C, E, LO, 4),
(151, 'Loop Length', (DU,2), NML,, C, E, RO, 3),
(151, 'Loop Length', (DU,2), NML,, C, E, LO, 4),
(152, 'Loop With', (C,1), NML,, C, E, RO, 3,
((0, 'Zeroes'),
(1, 'Ones'),
(2, 'Mixed'))),
(152, 'Loop With', (C,1), NML,, C, E, LO, 4,
((0, 'Zeroes'),
(1, 'Ones'),
(2, 'Mixed'))),
(153, 'Loop Assistant Physical Address', (HI,6), NML,, C, E, LO, 4),
(154, 'Loop Help', (C,1), NML,, C, E, LO, 4,
((0, 'Transmit'),
(1, 'Receive'),
(2, 'Full'))),
(155, 'Loop Node', CMN, NML,, C, E, LO, 4,),
(156, 'Loop Assistant Node', CMN, NML,, C, E, LO, 4),
(160, 'Counter Timer', (DU,2), NML,, C, (E,R), C),
(500, 'Name', CMN,,,, (E,R), (WO, C)),
(501, 'Circuit', (AI,16),,, (C,'*'), (L,N), (C,U), 3),
(501, 'Circuit', (AI,16),,, (C,'*'), (Q,L,N), (C,U), 4),
(502, 'Address', (DU,2),,,, E, WO),
(510, 'Incoming Timer', (DU,2),,, C, E, C),
(511, 'Outgoing Timer', (DU,2),,, C, E, C),
(600, 'Active Links', (DU,2),,, (S,'*'), (E,R), RO),
(601, 'Delay', (DU,2),,, (S,'*'), R, RO),
(700, 'NSP Version', CMV,,, C, E, RO),
(710, 'Maximum Links', (DU,2),,, C, E),
(720, 'Delay Factor', (DU,1),,, C, E),
(721, 'Delay Weight', (DU,1),,, C, E),
(722, 'Inactivity Timer', (DU,2),,, C, E),
(723, 'Retransmit Factor', (DU,2),,, C, E),
(810, 'Type', (C,1),,, S, A, RO, 3,
((0, 'Routing III'),
(1, 'Nonrouting III'),
(2, 'Phase II'))),
(810, 'Type', (C,1),,, S, A, RO, 4,
((0, 'Routing III'),
(1, 'Nonrouting III'),
(3, 'Area'),
(4, 'Routing IV'),
(5, 'Nonrouting IV'))),
(820, 'Cost', (DU,2),,, S, R, RO),
(821, 'Hops', (DU,1),,, S, R, RO),
(822, 'Circuit', (AI,16),,, (S,'*',Q), R, RO, (3,4)),
(830, 'Next Node', CMN,,, (S,'*'), R, RO, 4),
(900, 'Routing Version', CMV,,, C, E, RO),
(901, 'Type', (C,1),,, C, E,, 3,
((0, 'Routing III'),
(1, 'Nonrouting III'),
(2, 'Phase II'))),
(901, 'Type', (C,1),,, C, E,, 4,
((0, 'Routing III'),
(1, 'Nonrouting III'),
(3, 'Area'),
(4, 'Routing IV'),
(5, 'Nonrouting IV'))),
(910, 'Routing Timer', (DU,2),,, C, E),
(911, 'Subaddresses', CM2,,, C, E,, (3,4)),
(912, 'Broadcast Routing Timer', (DU,2),,, C, E,, 4),
(920, 'Maximum Address', (DU,2),,, C, E),
(921, 'Maximum Circuits', (DU,2),,, C, E,, (3,4)),
(922, 'Maximum Cost', (DU,2),,, C, E),
(923, 'Maximum Hops', (DU,1),,, C, E),
(924, 'Maximum Visits', (DU,1),,, C, E),
(925, 'Maximum Area', (DU,2),,, C, E,, 4),
(926, 'Maximum Broadcast Nonrouters', (DU,2),,, C, E,, 4),
(927, 'Maximum Broadcast Routers', (DU,2),,, C, E,, 4),
(928, 'Area Maximum Cost', (DU,2),,, C, E,, 4),
(929, 'Area Maximum Hops', (DU,2),,, C, E,, 4),
(930, 'Maximum Buffers', (DU,2),,, C, E),
(931, 'Buffer Size', (DU,2),,, C, E),
(932, 'Segment Buffer Size', (DU,2),,, C, E,, 4),
! RSX-specific node parameters
(2300, 'Receive Password', (C,1),,, C,,,),
(2301, 'Transmit Password', (C,1),,, C,,,),
(2310, 'Verification State', (C,1),,, C,,,,
((0, 'On'),
(1, 'Off'))),
! TOPS-10/20 specific node parameters
(2500, 'Fence', (DU,2),,, C, A,, 3),
(2511, 'Console Secondary Loader', (AI,255), NML,, C, A, (C,U)),
(2512, 'Console Load File', (AI,255), NML,, C, A, (C,U)),
! VMS specific node parameters
(2704, 'Privileged User ID', (DU,1),,,,,,,),
(2705, 'Privileged Account', (DU,1),,,,,,,),
(2706, 'Privileged Password', (DU,1),,,,,,,),
(2712, 'Non-privileged User ID', (DU,1),,,,,,,),
(2713, 'Non-privileged Account', (DU,1),,,,,,,),
(2714, 'Non-privileged Password', (DU,1),,,,,,,),
(2720, 'Receive password', (DU,1),,,,,,,),
(2721, 'Transmit password', (DU,1),,,,,,,),
(2730, 'Access', (C,1),,,,,,,
((0, 'None'),
(1, 'Incoming'),
(2, 'Outgoing'),
(3, 'Incoming and outgoing'),
(4, 'Required'))),
(2731, 'Default access', (C,1),,,,,,,
((0, 'None'),
(1, 'Incoming'),
(2, 'Outgoing'),
(3, 'Incoming and outgoing'),
(4, 'Required'))),
(2740, 'Pipeline quota', (DU,1),,,,,,,),
(2741, 'Alias address', (DU,1),,,,,,,),
(2751, 'Default proxy access', (C,1),,,,,,,
((0, 'None'),
(1, 'Incoming'),
(2, 'Outgoing'),
(3, 'Incoming and outgoing'),
(4, 'Required'))),
! PRO specific node parameters
(3110, 'Verification State', (C,1),,, C, E,,,
((0, 'On'),
(1, 'Off'))),
(3202, 'Active control buffers', (DU,2),,,(C,'*'), E,,,),
(3204, 'Active small buffers', (DU,2),,,(C,'*'), E,,,),
(3206, 'Active large buffers', (DU,2),,,(C,'*'), E,,,),
(3210, 'Maximum control buffers', (DU,2),,,(C,'*'), E,,,),
(3220, 'Maximum small buffers', (DU,2),,,(C,'*'), E,,,),
(3230, 'Maximum large buffers', (DU,2),,,(C,'*'), E,,,),
(3231, 'Large buffer size', (DU,2),,, C, E,,,),
(3240, 'Minimum receive buffers', (DU,2),,, C, E,,,),
(3280, 'Maximum remote nodes', (DU,2),,, C, E,,,),
(3281, 'Maximum aliases', (DU,2),,, C, E,,,),
(3282, 'Reboot maximum remote nodes', (DU,2),,, C, E,,,),
(3283, 'Reboot maximum aliases', (DU,2),,, C, E,,,),
(3284, 'Reboot large buffer size', (DU,2),,, C, E,,,),
(3285, 'Reboot node address', CMN,,, C, E,,,),
(3286, 'Reboot node name', (AI,6),,, C, E,,,),
(3287, 'Reboot node identifier', (AI,16),,, C, E,,,),
(3288, 'Reboot maximum large buffers', (DU,2),,, C, E,,,),
(3289, 'Reboot segment buffer size', (DU,2),,, C, E,,,),
(3290, 'Reboot maximum small buffers', (DU,2),,, C, E,,,),
(3291, 'Reboot maximum logical links', (DU,2),,, C, E,,,),
(3292, 'Remote nodes available', (DU,2),,, C, E,,,),
(3293, 'Aliases available', (DU,2),,, C, E,,,),
! Server Base specific node parameters
(3300, 'Receive password', (DU,1),,, C, E,,,),
(3301, 'Transmit password', (DU,1),,, C, E,,,),
(3310, 'Verification State', (C,1),,, C, E,,,
((0, 'On'),
(1, 'Off'))),
(3402, 'Active control buffers', (DU,2),,, C, E,,,),
(3404, 'Active small buffers', (DU,2),,, C, E,,,),
(3406, 'Active large buffers', (DU,2),,, C, E,,,),
(3410, 'Maximum control buffers', (DU,2),,, C, E,,,),
(3420, 'Maximum small buffers', (DU,2),,, C, E,,,),
(3430, 'Maximum large buffers', (DU,2),,, C, E,,,),
(3431, 'Large buffer size', (DU,2),,, C, E,,,),
(3440, 'Minimum receive buffers', (DU,2),,, C, E,,,),
(3450, 'CEX Pool: Total Bytes', (DU,2),,, C, E,,,),
(3452, 'CEX Pool: Number of Fragments', (DU,2),,, C, E,,,),
(3454, 'CEX Pool: Largest Fragment', (DU,2),,, C, E,,,),
(3460, 'Extended Pool: Total Bytes', (DU,2),,, C, E,,,),
(3462, 'Extended Pool: Number of Fragments', (DU,2),,, C, E,,,),
(3464, 'Extended Pool: Largest Fragment', (DU,2),,, C, E,,,) %;
%sbttl 'LINE Parameter Table'
macro
$NML$LINE_PARMS =
(0000, 'State', (C,1),,, (S,'*'),,,,
((0, 'On'),
(1, 'Off'),
(2, 'Service'),
(3, 'Cleared'))),
(0001, 'Substate', (C,1), NML,, (S,'*'),, RO,,
((0, 'Starting'),
(1, 'Reflecting'),
(2, 'Looping'),
(3, 'Loading'),
(4, 'Dumping'),
(5, 'Triggering'),
(6, 'Autoservice'),
(7, 'Autoloading'),
(8, 'Autodumping'),
(9, 'Autotriggering'),
(10, 'Synchronizing'),
(11, 'Failed'))),
(0100, 'Service', (C,1), NML,, C,,,,
((0, 'Enabled'),
(1, 'Disabled'))),
(0110, 'Counter Timer', (DU,2), NML,, C,, C),
(1100, 'Device', (AI,16),,, C,,, (3,4)),
(1105, 'Receive Buffers', (DU,2),,, C,,, (3,4)),
(1110, 'Controller', (C,1),,, C,,,,
((0, 'Normal'),
(1, 'Loopback'))),
(1111, 'Duplex', (C,1),,, C,,,,
((0, 'Full'),
(1, 'Half'))),
(1112, 'Protocol', (C,1),,, C,,, (3,4),
((0, 'DDCMP-Point'),
(1, 'DDCMP-Control'),
(2, 'DDCMP-Tributary'),
(4, 'DDCMP-DMC'),
(5, 'LAPB'),
(6, 'Ethernet'),
(7, 'CI'),
(8, 'QP2'))),
(1113, 'Clock', (C,1),,, C,,, (3,4),
((0, 'External'),
(1, 'Internal'))),
(1120, 'Service Timer', (DU,2),,, C),
(1121, 'Retransmit Timer', (DU,2),,, C,,, (3,4)),
(1122, 'Holdback Timer', (DU,2),,, C,, C,,, (3,4)),
(1130, 'Maximum Block', (DU,2),,, C,,, (3,4)),
(1131, 'Maximum Retransmits', (DU,1),,, C,, C, (3,4)),
(1132, 'Maximum Window', (DU,1),,, C,,, (3,4)),
(1150, 'Scheduling Timer', (DU,2),,, C,, C, (3,4)),
(1151, 'Dead Timer', (DU,2),,, C,, C, (3,4)),
(1152, 'Delay Timer', (DU,2),,, C,, C, (3,4)),
(1153, 'Stream Timer', (DU,2),,, C,, C, (3,4)),
(1160, 'Hardware Address', (HI,6),,, C,, RO, 4),
! RSX specific line parameters
(2300, 'Owner', (AI,3),,, C,,,),
(2310, 'Controller CSR', (O,2),,, C,,,),
(2311, 'Unit CSR', (O,2),,, C,,,),
(2312, 'Vector', (O,1),,, C,,,),
(2313, 'Priority', (DU,1),,, C,,,),
(2321, 'Multipoint Dead', (DU,1),,, C,,,),
(2330, 'Location', (C,1),,, C,,,,
((0, 'Firstfit'),
(1, 'Topdown'))),
! TOPS-10/20 specific line parameters
(2500, 'Receive buffer size', (DU,2),,, C,,RO),
(2650, 'Controller Register', (O,2),,, C,,, (3,4)),
(2651, 'Unit Register', (O,2),,, C,,, (3,4)),
(2655, 'Interrupt Vector', (O,2),,, C,,, (3,4)),
(2660, 'Interrupt Priority', (DU,1),,, C,,, (3,4)),
(2670, 'Pause Timer', (DU,2),,, C,,, (3,4)),
! VMS specific line parameters
(2701, 'Micro-code dump file specification', (DU,1),,,,,,,),
(2710, 'X.25 line mode', (DU,1),,,,,,,),
(2720, 'Ethernet protocol type', (DU,1),,,,,,,),
(2848, 'Buffer Size', (DU,2),,, C,,RO),
! PRO specific line parameters
(3110, 'Controller CSR', (DU,2),,, C),
(3112, 'Vector', (DU,2),,,C),
(3113, 'Priority', (DU,2),,,C),
! Server Base specific line parameters
(3310, 'Controller CSR', (O,2),,, C,,,),
(3311, 'Unit CSR', (O,2),,, C,,,),
(3312, 'Vector', (O,1),,, C,,,),
(3313, 'Priority', (DU,1),,, C,,,),
(3380, 'Logical name', (DU,1),,,,,,,),
(3385, 'Designated name', (DU,1),,,,,,,),
(3390, 'Actual name', (DU,1),,,,,,,) %;
%sbttl 'LOGGING Parameter Table'
!
macro
$NML$LOGGING_PARMS =
(000, 'State', (C,1), NML,, (S,'*'), E,,,
((0, 'On'),
(1, 'Off'),
(2, 'Hold'))),
(100, 'Name', (AI,255), NML,, (C,'*'),E,C),
(200, 'Sink Node', CMN, NML,, (Q,EV,'*'), S),
(201, 'Events', CME, NML,, (EV,'*'), S,,,
((0, 'Node'),
(1, 'Line'),
(2, 'Logging'),
(3, 'Circuit'),
(4, 'Module'),
(5, 'Area'))) %;
%sbttl 'CIRCUIT Parameter Table'
macro
$NML$CIRCUIT_PARMS =
(0000, 'State', (C,1), NML,, (S,'*'),,, (3,4),
((0, 'On'),
(1, 'Off'),
(2, 'Service'),
(3, 'Cleared'))),
(0001, 'Substate', (C,1), NML,, (S,'*'),, RO, (3,4),
((0, 'Starting'),
(1, 'Reflecting'),
(2, 'Looping'),
(3, 'Loading'),
(4, 'Dumping'),
(5, 'Triggering'),
(6, 'Autoservice'),
(7, 'Autoloading'),
(8, 'Autodumping'),
(9, 'Autotriggering'),
(10, 'Synchronizing'),
(11, 'Failed'))),
(0100, 'Service', (C,1), NML,, C,,, (3,4),
((0, 'Enabled'),
(1, 'Disabled'))),
(0110, 'Counter Timer', (DU,2), NML,, C,, C, (3,4)),
(0120, 'Service Physical Address', (HI,6), NML,, (S,'*',Q),, RO, 4),
(0121, 'Service Substate', (C,1), NML,, (S,'*'), Q, RO, 4),
(0200, 'Connected Node', CMN,,, (S,'*'),, RO, (3,4)),
(0201, 'Connected Object', CMO,,, (S,'*'),, RO, (3,4)),
(0400, 'Loopback Name', (AI,6),,, (S,'*'),, RO, (3,4)),
(0800, 'Adjacent Node', CMN,,, (S,'*'),, RO, 3),
(0800, 'Adjacent Node', CMN,,, (S,'*',Q),, RO, 4),
(0801, 'Designated Router', CMN,,, S,, RO, 4),
(0810, 'Block Size', (DU,2),,, S,, RO, 3),
(0810, 'Block Size', (DU,2),,, S, Q, RO, 4),
(0811, 'Originating Queue Limit', (DU,2),,, C,,, 4),
(0900, 'Cost', (DU,1),,, C,,, (3,4)),
(0901, 'Maximum Routers', (DU,1),,,,,, 4),
(0902, 'Router Priority', (DU,1),,,,,, 4),
(0906, 'Hello Timer', (DU,2),,, C,,, (3,4)),
(0907, 'Listen Timer', (DU,2),,, C,,, 3),
(0907, 'Listen Timer', (DU,2),,, C, Q, RO, 4),
(0910, 'Blocking', (C,1),,, C,,, (3,4),
((0, 'Enabled'),
(1, 'Disabled'))),
(0920, 'Maximum Recalls', (DU,1),,, C,, C, (3,4)),
(0921, 'Recall Timer', (DU,2),,, C,, C, (3,4)),
(0930, 'Number', (AI,16),,, C,,, (3,4)),
(1000, 'User', CMU,,, (S,'*'),, RO, (3,4),
((0, 'Node'),
(1, 'Line'),
(2, 'Logging'),
(3, 'Circuit'),
(4, 'Module'))),
(1010, 'Polling State', (C,1),,, (S,'*'),,, (3,4),
((0, 'Automatic'),
(1, 'Active'),
(2, 'Inactive'),
(3, 'Dying'),
(4, 'Dead'))),
(1011, 'Polling substate', (C,1),,, (S,'*'),, RO, (3,4),
((1, 'Active'),
(2, 'Inactive'),
(3, 'Dying'),
(4, 'Dead'))),
(1100, 'Owner', CMU,,, C,, C, (3,4),
((0, 'Node'),
(1, 'Line'),
(2, 'Logging'),
(3, 'Circuit'),
(4, 'Module'))),
(1110, 'Line', (AI,16),,, C,, U, (3,4)),
(1111, 'Usage', (C,1),,, C,,, (3,4),
((0, 'Permanent'),
(1, 'Incoming'),
(2, 'Outgoing'))),
(1112, 'Type', (C,1),,, C,, RO, 3,
((0, 'DDCMP-Point'),
(1, 'DDCMP-Control'),
(2, 'DDCMP-Tributary'),
(3, 'X25'),
(4, 'DDCMP-DMC'),
(5, 'LAPB'))),
(1112, 'Type', (C,1),,, C,,, 4,
((0, 'DDCMP-Point'),
(1, 'DDCMP-Control'),
(2, 'DDCMP-Tributary'),
(3, 'X25'),
(4, 'DDCMP-DMC'),
(6, 'Ethernet'),
(7, 'CI'),
(8, 'QP2'),
(9, 'BISYNC'))),
(1120, 'DTE', (AI,16),,, C,, U, (3,4)),
(1121, 'Channel', (DU,2),,, C,,, (3,4)),
(1122, 'Maximum Data', (DU,2),,, C,,, (3,4)),
(1123, 'Maximum Window', (DU,1),,, C,,, (3,4)),
(1140, 'Tributary', (DU,1),,, C,,, (3,4)),
(1141, 'Babble Timer', (DU,2),,, C,, C, (3,4)),
(1142, 'Transmit Timer', (DU,2),,, C,, C, (3,4)),
(1145, 'Maximum Buffers', (C,1),,, C,, C, (3,4),
((255, 'Unlimited'))),
(1146, 'Maximum Transmits', (DU,1),,, C,, C, (3,4)),
(1150, 'Active Base', (DU,1),,, C,, C, (3,4)),
(1151, 'Active Increment', (DU,1),,, C,, C, (3,4)),
(1152, 'Inactive Base', (DU,1),,, C,, C, (3,4)),
(1153, 'Inactive Increment', (DU,1),,, C,, C, (3,4)),
(1154, 'Inactive Threshold', (DU,1),,, C,, C, (3,4)),
(1155, 'Dying Base', (DU,1),,, C,, C, (3,4)),
(1156, 'Dying Increment', (DU,1),,, C,, C, (3,4)),
(1157, 'Dying Threshold', (DU,1),,, C,, C, (3,4)),
(1158, 'Dead Threshold', (DU,1),,, C,, C, (3,4)),
! RSX-specific circuit parameters
(2302, 'Multipoint active', (DU,1),,, C,, C,),
(2320, 'Multipoint active ratio', (DU,1),,,,,,),
(2380, 'Logical name', (DU,1),,,,,,),
(2385, 'Designated name', (DU,1),,,,,,),
(2390, 'Actual name', (DU,1),,,,,,),
! TOPS-10/20 specific circuit parameters
(2600, 'Node Type', (C,1),,, C,,, (3,4),
((0, 'Routing III'),
(1, 'Nonrouting III'),
(2, 'Phase II'),
(3, 'Area'),
(4, 'Routing IV'),
(5, 'Nonrouting IV'))),
! VMS specific circuit parameters
(2700, 'Verification', (C,1),,,,,,,
((0, 'Enabled'),
(1, 'Disabled'))),
(2720, 'Transport type', (C,1),,,,,,,
((1, 'Z-node'),
(2, 'Force phase II on this circuit'),
(3, 'Routing III'),
(4, 'Routing III'),
(5, 'Nonrouting phase IV'))),
! Server Base specific circuit parameters
(3380, 'Logical name', (DU,1),,,,,,,),
(3385, 'Designated name', (DU,1),,,,,,,),
(3390, 'Actual name', (DU,1),,,,,,,) %;
%sbttl 'MODULE Parameter Tables'
macro
$NML$MODULE_CONSOLE_PARMS =
(0110, 'Reservation Timer', (DU,2), NML,, (C,'*'),,, 4) %,
$NML$MODULE_LOADER_PARMS =
(0010, 'Assistance', (C,1), NML,, (S,'*'),,, 4,
((0, 'Enabled'),
(1, 'Disabled'))) %,
$NML$MODULE_LOOPER_PARMS =
(0010, 'Assistance', (C,1), NML,, (S,'*'),,, 4,
((0, 'Enabled'),
(1, 'Disabled'))) %,
$NML$MODULE_CONFIGURATOR_PARMS =
(0100, 'Circuit', (AI,16), NML,, Q,,, 4),
(0110, 'Surveillance', (C,1), NML,, (S,'*'), Q,, 4,
((0, 'Enabled'),
(1, 'Disabled'))),
(0111, 'Elapsed Time', CMT, NML,, (S,'*'), Q, RO, 4),
(0120, 'Physical Address', (HI,6), NML,, (S,Q),, RO, 4),
(0130, 'Last Report', CML, NML,, S, Q, RO, 4,
((1, 'Jan'),
(2, 'Feb'),
(3, 'Mar'),
(4, 'Apr'),
(5, 'May'),
(6, 'Jun'),
(7, 'Jul'),
(8, 'Aug'),
(9, 'Sep'),
(10, 'Oct'),
(11, 'Nov'),
(12, 'Dec'))),
(1001, 'Maintenance Version', CMV, NML,, S, Q, RO, 4),
(1002, 'Functions', CMF, NML,, S, Q, RO, 4,
((0, 'Loop'),
(1, 'Dump'),
(2, 'Primary Loader'),
(3, 'Multi-block Loader'),
(4, 'Boot'),
(5, 'Console Carrier'),
(6, 'Data Link Counters'),
(7, 'Console Carrier Reservation'))),
(1003, 'Console User', (HI,6), NML,, S, Q, RO, 4),
(1004, 'Reservation Timer', (DU,2), NML,, S, Q, RO, 4),
(1005, 'Command Size', (DU,2), NML,, S, Q, RO, 4),
(1006, 'Response Size', (DU,2), NML,, S, Q, RO, 4),
(1007, 'Hardware Address', (HI,6), NML,, S, Q, RO, 4),
(1100, 'Device', (C,1), NML,, S, Q, RO, 4,
((0, 'DP'), (1, 'UNA'),
(2, 'DU'), (3, 'CNA'), (4, 'DL'),
(5, 'QNA'), (6, 'DQ'), (7, 'CI'),
(8, 'DA'), (9, 'PCL'), (10, 'DUP'),
(12, 'DMC'), (14, 'DN'), (15, 'NI'),
(16, 'DLV'), (18, 'DMP'), (20, 'DTE'),
(22, 'DV'), (24, 'DZ'),
(28, 'KDP'), (30, 'KDZ'),
(32, 'KL'), (34, 'DMV'),
(36, 'DPV'), (38, 'DMF'),
(40, 'DMR'), (42, 'KMY'), (44, 'KMX'))),
(1200, 'Software Identification', CMS, NML,, S, Q, RO, 4),
(1300, 'System Processor', (C,1), NML,, S, Q, RO, 4,
((1, 'PDP-11'),
(2, 'Pluto'))),
(1400, 'Data Link', (C,1), NML,, S, Q, RO, 4,
((1, 'Ethernet'),
(2, 'DDCMP'),
(3, 'LAPB'))),
(1401, 'Data Link Buffer Size', (DU,2), NML,, S, Q, RO, 4) %,
$NML$MODULE_X25_ACCESS_PARMS =
(0320, 'Node', CMN, NML,, C, ((Q,1110)),, (3,4)),
(0330, 'User', (AI,39), NML,, C, ((Q,1110)), (C,U), (3,4)),
(0331, 'Password', (AI,39), NML,, C, ((Q,1110)), (C,P), (3,4)),
(0332, 'Account', (AI,39), NML,, C, ((Q,1110)), (C,U), (3,4)),
(1110, 'Network', (AI,16), NML,, Q,, U, (3,4)),
(2310, 'Destination', (AI,6),,, C,,,),
(2320, 'Number', (AI,16),,, C,,,),
(2330, 'Scope', (DU,1),,, C,,,) %,
$NML$MODULE_X25_PROTOCOL_PARMS =
(0000, 'State', (C,1),,, (S,'*'), Q,, (3,4),
((0, 'On'),
(1, 'Off'),
(2, 'Shut'))),
(0100, 'Counter Timer', (DU,2), NML,, C, ((Q,1100)), C, (3,4)),
(1000, 'Active Channels', (DU,2),,, (S,'*'), ((Q,1100)), RO, (3,4)),
(1010, 'Active Switched', (DU,2),,, (S,'*'), ((Q,1100)), RO, (3,4)),
(1100, 'DTE', (AI,16),,, Q,, U, (3,4)),
(1101, 'Group', (AI,16),,, Q,, U, (3,4)),
(1110, 'Network', (AI,16),,, C,, U, (3,4)),
(1120, 'Line', (AI,16),,, C, ((Q,1100)), (C,U), (3,4)),
(1130, 'Channels', CM2,,, C, ((Q,1100)),, (3,4)),
(1131, 'Maximum Channels', (DU,2),,, C, ((Q,1100)), RO, (3,4)),
(1140, 'Default Data', (DU,2),,, C,,, (3,4)),
(1141, 'Default Window', (DU,1),,, C,,, (3,4)),
(1150, 'Maximum Data', (DU,2),,, C,,, (3,4)),
(1151, 'Maximum Window', (DU,1),,, C,,, (3,4)),
(1152, 'Maximum Clears', (DU,1),,, C,, C, (3,4)),
(1153, 'Maximum Resets', (DU,1),,, C,, C, (3,4)),
(1154, 'Maximum Restarts', (DU,1),,, C,, C, (3,4)),
(1160, 'Call Timer', (DU,1),,, C,, C, (3,4)),
(1161, 'Clear Timer', (DU,1),,, C,, C, (3,4)),
(1162, 'Reset Timer', (DU,1),,, C,, C, (3,4)),
(1163, 'Restart Timer', (DU,1),,, C,, C, (3,4)),
(1170, 'DTE', (AI,16),,, C, ((Q,1101)), (C,U), (3,4)),
(1171, 'Number', (DU,2),,, C, ((Q,1101)),, (3,4)),
(1172, 'Type', (C,1),,, C, ((Q,1101)), C, (3,4),
((1, 'Bilateral'))),
! VMS specific module X25-PROTOCOL parameters
(2720, 'Substate', (C,1), RO,, (S,'*'),, RO, (3,4),
((10, 'Synchronizing'),
(11, 'Failed'),
(12, 'Running'),
(13, 'Unsynchronized'))) %,
$NML$MODULE_X25_SERVER_PARMS =
(0100, 'Counter Timer', (DU,2), NML,, C, Q, C, (3,4)),
(0200, 'Active Circuits', (DU,2),,, (S,'*'),, RO, (3,4)),
(0300, 'Destination', (AI,16),,, Q,, U, (3,4)),
(0310, 'Maximum Circuits', (DU,2),,, C,,, (3,4)),
(0320, 'Node', CMN,,, C, Q,, (3,4)),
(0330, 'User', (AI,39),,, C, Q, (C,U), (3,4)),
(0331, 'Password', (AI,39),,, C, Q, (C,P), (3,4)),
(0332, 'Account', (AI,39),,, C, Q, (C,U), (3,4)),
(0340, 'Object', CMO,,, C, Q,, (3,4)),
(0350, 'Priority', (DU,1),,, C, Q, C, (3,4)),
(0351, 'Call Mask', (HI,16),,, C, Q, C, (3,4)),
(0352, 'Call Value', (HI,16),,, C, Q, C, (3,4)),
(0353, 'Group', (AI,16),,, C, Q, (C,U), (3,4)),
(0354, 'Number', (AI,16),,, C, Q, C, (3,4)),
(0355, 'Subaddresses', CM2,,, C, Q, C, (3,4)) %;
!macro
! $NML$MODULE_PARMS =
! (0000, 'State', (C,1),,, (S,'*'), Q,, (3,4),
! ((0, 'On'),
! (1, 'Off'),
! (2, 'Shut'))),
! (0100, 'Counter Timer', (DU,2), NML,, C, Q, C, (3,4)),
! (0200, 'Active Circuits', (DU,2),,, (S,'*'),, RO, (3,4)),
! (0300, 'Destination', (AI,16),,, Q,, U, (3,4)),
! (0310, 'Maximum Circuits', (DU,2),,, C,,, (3,4)),
!
! %if $MCB
! %then ! MODULE X25-SERVER parameters
! (0320, 'Node', CMN,,, C, Q,, (3,4)),
! (0330, 'User', (AI,39),,, C, Q, (C,U), (3,4)),
! (0331, 'Password', (AI,39),,, C, Q, (C,P), (3,4)),
! (0332, 'Account', (AI,39),,, C, Q, (C,U), (3,4)),
! %else ! MODULE X25-ACCESS parameters
! (0320, 'Node', CMN, NML,, C, ((Q,1100)),, (3,4)),
! (0330, 'User', (AI,39), NML,, C, ((Q,1100)), (C,U), (3,4)),
! (0331, 'Password', (AI,39), NML,, C, ((Q,1100)), (C,P), (3,4)),
! (0332, 'Account', (AI,39), NML,, C, ((Q,1100)), (C,U), (3,4)),
! %fi
!
! (0340, 'Object', CMO,,, C, Q,, (3,4)),
! (0350, 'Priority', (DU,1),,, C, Q, C, (3,4)),
! (0351, 'Call Mask', (HI,16),,, C, Q, C, (3,4)),
! (0352, 'Call Value', (HI,16),,, C, Q, C, (3,4)),
! (0353, 'Group', (AI,16),,, C, Q, (C,U), (3,4)),
! (0354, 'Number', (AI,16),,, C, Q, C, (3,4)),
! (0355, 'Subaddresses', CM2,,, C, Q, C, (3,4)),
! (1000, 'Active Channels', (DU,2),,, (S,'*'), Q, RO, (3,4)),
! (1010, 'Active Switched', (DU,2),,, (S,'*'), Q, RO, (3,4)),
! (1100, 'DTE', (AI,16),,, Q,, U, (3,4)),
! (1101, 'Group', (AI,16),,, Q,, U, (3,4)),
!
! %if $MCB
! %then ! MODULE X25-PROTOCOL parameter
! (1110, 'Network', (AI,16),,, C,, U, (3,4)),
! %else ! MODULE X25-ACCESS parameter
! (1110, 'Network', (AI,16), NML,, Q,, U, (3,4)),
! %fi
!
! (1120, 'Line', (AI,16),,, C, Q, (C,U), (3,4)),
! (1130, 'Channels', CM2,,, C, Q,, (3,4)),
! (1131, 'Maximum Channels', (DU,2),,, C, Q, RO, (3,4)),
! (1140, 'Default Data', (DU,2),,, C,,, (3,4)),
! (1141, 'Default Window', (DU,1),,, C,,, (3,4)),
! (1150, 'Maximum Data', (DU,2),,, C,,, (3,4)),
! (1151, 'Maximum Window', (DU,1),,, C,,, (3,4)),
! (1152, 'Maximum Clears', (DU,1),,, C,, C, (3,4)),
! (1153, 'Maximum Resets', (DU,1),,, C,, C, (3,4)),
! (1154, 'Maximum Restarts', (DU,1),,, C,, C, (3,4)),
! (1160, 'Call Timer', (DU,1),,, C,, C, (3,4)),
! (1161, 'Clear Timer', (DU,1),,, C,, C, (3,4)),
! (1162, 'Reset Timer', (DU,1),,, C,, C, (3,4)),
! (1163, 'Restart Timer', (DU,1),,, C,, C, (3,4)),
! (1170, 'DTE', (AI,16),,, C, Q, (C,U), (3,4)),
! (1171, 'Number', (DU,2),,, C, Q,, (3,4)),
! (1172, 'Type', (C,1),,, C, Q, C, (3,4),
! ((1, 'Bilateral'))) %;
%sbttl 'CIRCUIT Counters'
macro
$NML$CIRCUIT_COUNTERS =
(0000, 'Seconds Since Last Zeroed', 16),,
(0800, 'Terminating Packets Received', 32),,
(0801, 'Originating Packets Sent', 32),,
(0802, 'Terminating Congestion Loss', 16),,
(0805, 'Corruption Loss', 8),,
(0810, 'Transit Packets Received', 32),,
(0811, 'Transit Packets Sent', 32),,
(0812, 'Transit Congestion Loss', 16),,
(0820, 'Circuit Downs', 8),,
(0821, 'Initialization Failures', 8),,
(1000, 'Bytes Received', 32),,
(1001, 'Bytes Sent', 32),,
(1010, 'Data Blocks Received', 32),,
(1011, 'Data Blocks Sent', 32),,
(1020, 'Data Error Inbound', 8),
((0, 'NAKs Sent, Header Block Check Error'),
(1, 'NAKs Sent, Data Field Block Check Error'),
(2, 'NAKs Sent, REP Response')),
(1021, 'Data Errors Outbound', 8),
((0, 'NAKs Received, Header Block Check Error'),
(1, 'NAKs Received, Data Field'),
(2, 'NAKs Received, REP Response')),
(1030, 'Remote Reply Timeouts', 8),,
(1031, 'Local Reply Timeouts', 8),,
(1040, 'Remote Buffer Errors', 8),
((0, 'NAKs Received, Buffer Unavailable'),
(1, 'NAKs Received, Buffer Too Small')),
(1041, 'Local Buffer Errors', 8),
((0, 'NAKs Sent, Buffer Unavailable'),
(1, 'NAKs Sent, Buffer Too Small')),
(1050, 'Selection Intervals Elapsed', 16),,
(1051, 'Selection Timeouts', 8),
((0, 'No Reply To Select'),
(1, 'Incomplete Reply To Select')),
(1065, 'User Buffer Unavailable', 16),,
(1240, 'Locally Initiated Resets', 8),,
(1241, 'Remotely Initiated Resets', 8),,
(1242, 'Network Initiated Resets', 8),,
! TOPS-10/20 specific circuit counters
(2500, 'Transmit packets discarded-blocksize exceeded', 16),,
! VMS specific circuit counters
(2701, 'Multicast received for not enabled protocol type', 16),
%;
%sbttl 'LINE Counters'
macro
$NML$LINE_COUNTERS =
(0000, 'Seconds Since Last Zeroed', 16),,
(1000, 'Bytes Received', 32),,
(1001, 'Bytes Sent', 32),,
(1002, 'Multicast Bytes Received', 32),,
(1010, 'Data Blocks Received', 32),,
(1011, 'Data Blocks Sent', 32),,
(1012, 'Multicast Bytes Sent', 32),,
(1013, 'Blocks sent, initially deferred', 32),,
(1014, 'Blocks sent, single collision', 32),,
(1015, 'Blocks sent, multiple collisions', 32),,
(1020, 'Data Errors Inbound', 8),
((0, 'NAKs Sent, Header Block Check Error'),
(1, 'NAKs Sent, Data Field Block Check'),
(2, 'NAKs Sent, REP Response'),
(3, 'Block Too Long'),
(4, 'Block Check Error'),
(5, 'REJ Sent')),
(1021, 'Data Errors Outbound', 8),
((0, 'NAKs Received, Header Block Check Error'),
(1, 'NAKs Received, Data Field Block Check Error'),
(2, 'NAKs Received, REP Response'),
(3, 'REJ Received')),
(1030, 'Remote Reply Timeouts', 8),,
(1031, 'Local Reply Timeouts', 8),,
(1040, 'Remote Buffer Errors', 8),
((0, 'NAKs Received, Buffer Unavailable'),
(1, 'NAKs Received, Buffer Too Small'),
(2, 'RNR Received, Buffer Unavailable')),
(1041, 'Local Buffer Errors', 8),
((0, 'NAKs Sent, Buffer Unavailable'),
(1, 'NAKs Sent, Buffer Too Small'),
(2, 'RNR Sent, Buffer Unavailable')),
(1050, 'Selection Intervals Elapsed', 16),,
(1051, 'Selection Timeouts', 8),
((0, 'No Reply To Select'),
(1, 'Incomplete Reply To Select')),
(1060, 'Send failure', 16),
((0, 'Excessive Collisions'),
(1, 'Carrier check failed'),
(2, 'Short circuit'),
(3, 'Open circuit'),
(4, 'Frame too long'),
(5, 'Remote failure to defer')),
(1061, 'Collision detect check failure', 16),,
(1062, 'Receive failure', 16),
((0, 'Block check error'),
(1, 'Framing error'),
(2, 'Frame too long')),
(1063, 'Unrecognized frame destination', 16),,
(1064, 'Data Overrun', 16),,
(1065, 'System buffer unavailable', 16),,
(1066, 'User buffer unavailable', 16),,
(1067, 'TDR value', 16),,
(1100, 'Remote Process Errors', 8),
((0, 'NAKs Received, Receive Overrun'),
(1, 'NAKs Sent, Header Format Error'),
(2, 'Selection Address Errors'),
(3, 'Streaming Tributaries'),
(4, 'Invalid N(R) Received'),
(5, 'FRMR Sent, Header Format Error')),
(1101, 'Local Process Errors', 8),
((0, 'NAKs Sent, Receive Overrun'),
(1, 'Receiving Overruns, NAKs Not Sent'),
(2, 'Transmit Underrun'),
(3, 'NAKs Received, Header Format Error'),
(4, 'Receive Overrun'),
(5, 'FRMR Received, Header Format Error')),
! TOPS-10/20 specific line counters
(2500, 'Device Configuration Errors', 8),
((0, 'Invalid Controller Register'),
(1, 'Non-existent Controller Register'),
(2, 'Invalid Unit Register'),
(3, 'Non-existent Unit Register'),
(4, 'Invalid Interrupt Vector'),
(5, 'Conflicting Interrupt Vector'),
(6, 'Invalid Interrupt priority')),
(2501, 'Device Service Errors', 8),
((0, 'Lost Interrupt'),
(1, 'Lost RDYI'),
(2, 'Lost HALT'),
(3, 'Lost Transmit'),
(4, 'Lost Doorbell')),
(2502, 'Fatal Device Errors', 8),
((0, 'Invalid Register Contents'),
(1, 'Receive BA mismatch'),
(2, 'Transmit BA mismatch'),
(3, 'Non-existent Memory Address given to Device'),
(4, 'Microcode error'),
(5, 'Completion Queue Overrun'),
(6, 'Doorbell Stuck')),
(2503, 'KMC Polling Adjustments', 8),,
! VMS specific line counters
(2701, 'Multicast packets transmitted', 16),,
(2702, 'Multicast bytes transmitted', 16),,
! PRO specific line counters
(3130, 'DECNA lockup value', 16),
%;
%sbttl 'MODULE Counters'
macro
$NML$X25_PROTOCOL_COUNTERS =
(0000, 'Seconds Since Last Zeroed', 16),,
(1000, 'Bytes Received', 32),,
(1001, 'Bytes Sent', 32),,
(1010, 'Data Blocks Received', 32),,
(1011, 'Data Blocks Sent', 32),,
(1200, 'Calls Received', 16),,
(1201, 'Calls Sent', 16),,
(1210, 'Fast Selects Received', 16),,
(1211, 'Fast Selects Sent', 16),,
(1220, 'Maximum Switched Circuits Active', 16),,
(1221, 'Maximum Channels Active', 16),,
(1230, 'Received Call Resource Errors', 16),,
(1240, 'Locally Initiated Resets', 8),,
(1241, 'Network Initiated Resets', 8),,
(1242, 'Remotely Initiated Resets', 8),,
(1250, 'Restarts', 8),
%,
$NML$X25_SERVER_COUNTERS =
(0000, 'Seconds Since Last Zeroed', 16),,
(0200, 'Maximum Circuits Active', 16),,
(0210, 'Incoming Calls Rejected, No Resources', 8),,
(0211, 'Logical Links Rejected, No Resources', 8),
%;
%sbttl 'NODE Counters'
macro
$NML$NODE_COUNTERS =
(0000, 'Seconds Since Last Zeroed', 16),,
(0600, 'User Bytes Received', 32),,
(0601, 'User Bytes Sent', 32),,
(0602, 'User Messages Received', 32),,
(0603, 'User Messages Sent', 32),,
(0608, 'Total Bytes Received', 32),,
(0609, 'Total Bytes Sent', 32),,
(0610, 'Total Messages Received', 32),,
(0611, 'Total Messages Sent', 32),,
(0620, 'Connects Received', 16),,
(0621, 'Connects Sent', 16),,
(0630, 'Response Timeouts', 16),,
(0640, 'Received Connect Resource Errors', 16),,
(0700, 'Maximum Logical Links Active', 16),,
(0900, 'Packet Loss', 8),,
(0901, 'Node Unreachable Packet Loss', 16),,
(0902, 'Node Out-of-Range Packet Loss', 8),,
(0903, 'Oversized Packet Loss', 8),,
(0910, 'Packet Format Errors', 8),,
(0920, 'Partial Routing Update Loss', 8),,
(0930, 'Verification Rejects', 8),,
! RSX specific node counters
(2300, 'Node maximum logical links active', 8),,
(2310, 'Total received connect resource errors', 8),,
! PRO specific node counters
(3100, 'Seconds since last zeroed', 16),,
(3110, 'Control buffer shortages', 16),,
(3120, 'Small buffer shortages', 16),,
(3130, 'Large buffer shortages', 16),,
(3140, 'Receive buffer shortages', 16),,
! Server Base specific node counters
(3310, 'Control buffer allocation failures', 16),,
(3320, 'Small buffer allocation failures', 16),,
(3330, 'Large buffer allocation failures', 16),,
(3340, 'Receive buffer allocation failures', 16),
%;
%sbttl 'Events'
! Define two applicability values in addition to the entity types
! Note: if the MCB ever supports events, or TOPS-10 and TOPS-20 not generate
! the same events, then the NO_LOCAL should be changed to 3 operating system
! specific flags.
literal
ANY_ENTITY = -2, ! Any entity on local node
NO_LOCAL = -3; ! This event is not generated on the
! the local node.
macro
$NML$EVENTS =
$NML$NETWORK_MANAGEMENT_EVENTS,
$NML$SESSION_CONTROL_EVENTS,
$NML$END_COMMUNICATION_EVENTS,
$NML$ROUTER_EVENTS,
$NML$DATA_LINK_EVENTS,
$NML$PHYSICAL_LINK_EVENTS,
$NML$LCG_EVENTS,
$NML$VMS_EVENTS %,
$NML$NETWORK_MANAGEMENT_EVENTS =
(0, 0, NO_ENTITY_, 'Event records lost'),
(0, 1, ENTITY_NODE, 'Automatic node counters'),
(0, 2, ENTITY_LINE, 'Automatic line counters'),
(0, 3, ENTITY_CIRCUIT, 'Automatic service'),
(0, 4, ENTITY_LINE, 'Line counters zeroed'),
(0, 5, ENTITY_NODE, 'Node counters zeroed'),
(0, 6, ENTITY_CIRCUIT, 'Passive loopback'),
(0, 7, ENTITY_CIRCUIT, 'Aborted service request'),
(0, 8, ANY_ENTITY, 'Automatic counters'),
(0, 9, ANY_ENTITY, 'Counters zeroed') %,
$NML$EVENT_0_PARMS =
(0, 'Service',CMDC , NML,,,,RO,,
((0, 'Load'),
(1, 'Dump'))),
(1, 'Status',CMDC , NML,,,,RO,,),
(2, 'Operation',CMDC , NML,,,,RO,,
((0, 'Initiated'),
(1, 'Terminated'))),
(3, 'Reason',CMDC , NML,,,,RO,,
((0, 'Receive timeout'),
(1, 'Receive error'),
(2, 'Line state change by higher level'),
(3, 'Unrecognized request'),
(4, 'Line open error'))),
(4, 'Qualifier',CMDC , NML,,,,RO,,),
(5, 'Node',CMN , NML,,,,RO,,),
(6, 'DTE',CMDC , NML,,,,RO,,),
(7, 'Filespec',CMDC , NML,,,,RO,,),
(8, 'Software type',CMDC, NML,,,,RO,,
((0, 'Secondary loader'),
(1, 'Tertiary loader'),
(2, 'System image'))),
(2500, 'Physical address',CMDC, NML,,,,RO,,)
%;
macro
$NML$SESSION_CONTROL_EVENTS =
(2, 0, NO_LOCAL, 'Local node state change'),
(2, 1, NO_LOCAL, 'Access control reject') %,
$NML$EVENT_2_PARMS =
(0, 'Reason',CMDC, NML,,,,RO,,
((0, 'Operator command'),
(1, 'Normal operation'))),
(1, 'Old state',CMDC, NML,,,,RO,,
((0, 'On'),
(1, 'Off'),
(2, 'Shut'),
(3, 'Restricted'))),
(2, 'New state',CMDC, NML,,,,RO,,
((0, 'On'),
(1, 'Off'),
(2, 'Shut'),
(3, 'Restricted'))),
(3, 'Source node',CMN, NML,,,,RO,,),
(4, 'Source process',CMDC, NML,,,,RO,,),
(5, 'Destination process',CMDC, NML,,,,RO,,),
(6, 'User',CMDC , NML,,,,RO,,),
(7, 'Password',CMDC , NML,,,,RO,,
((0, 'Set'))),
(8, 'Account',CMDC , NML,,,,RO,,) %;
macro
$NML$END_COMMUNICATION_EVENTS =
(3, 0, NO_ENTITY_, 'Invalid message'),
(3, 1, NO_ENTITY_, 'Invalid flow control'),
(3, 2, ENTITY_NODE, 'Data base reused') %,
$NML$EVENT_3_PARMS =
(0, 'Message',CMDC , NML,,,,RO,,),
(1, 'Current flow request count',CMDC,NML,,,,RO,,),
(2, 'Source node',CMN, NML,,,,RO,,) %;
macro
$NML$ROUTER_EVENTS =
(4, 0, NO_ENTITY_, 'Aged packet loss'),
(4, 1, ENTITY_CIRCUIT, 'Node unreachable packet loss'),
(4, 2, ENTITY_CIRCUIT, 'Node out-of-range packet loss'),
(4, 3, ENTITY_CIRCUIT, 'Oversized packet loss'),
(4, 4, ENTITY_CIRCUIT, 'Packet format error'),
(4, 5, ENTITY_CIRCUIT, 'Partial routing update loss'),
(4, 6, ENTITY_CIRCUIT, 'Verification reject'),
(4, 7, ENTITY_CIRCUIT, 'Circuit down, circuit fault'),
(4, 8, ENTITY_CIRCUIT, 'Circuit down'),
(4, 9, ENTITY_CIRCUIT, 'Circuit down, operator initiated'),
(4, 10, ENTITY_CIRCUIT, 'Circuit up'),
(4, 11, ENTITY_CIRCUIT, 'Initialization failure, line fault'),
(4, 12, ENTITY_CIRCUIT, 'Initialization failure, software fault'),
(4, 13, ENTITY_CIRCUIT, 'Initialization failure, operator fault'),
(4, 14, ENTITY_NODE, 'Node reachability change'),
(4, 15, ENTITY_CIRCUIT, 'Adjacency up'),
(4, 16, ENTITY_CIRCUIT, 'Adjacency rejected'),
(4, 17, ENTITY_AREA, 'Area reachability change'),
(4, 18, ENTITY_CIRCUIT, 'Adjacency down'),
(4, 19, ENTITY_CIRCUIT, 'Adjacency down, operator initiated') %,
$NML$EVENT_4_PARMS =
(0, 'Packet header',CMDC,NML,,,,RO,,),
(1, 'Packet beginning',CMDC,NML,,,,RO,,),
(2, 'Highest address',CMDC,NML,,,,RO,,),
(3, 'Node',CMN,NML,,,,RO,,),
(4, 'Expected node',CMDC,NML,,,,RO,,),
(5, 'Reason',CMDC,NML,,,,RO,,
((0, 'Line Synchronization Lost'),
(1, 'Data Errors'),
(2, 'Unexpected Packet Type'),
(3, 'Routing Update Checksum Error'),
(4, 'Adjacent Node Address Change'),
(5, 'Verification Receive Timeout'),
(6, 'Version Skew'),
(7, 'Adjacent Node Address out of Range'),
(8, 'Adjacent Node Block Size too Small'),
(9, 'Invalid Verification Seed Value'),
(10, 'Adjacent Node Listener Receive Timeout'),
(11, 'Adjacent Node Listener Received Invalid Data'),
(12, 'Call Failed'),
(13, 'Verification password required from Phase III node'),
(14, 'Dropped by adjacent node'))),
(6, 'Received version',CMDC,NML,,,,RO,,),
(7, 'Status',CMDC,NML,,,,RO,,
((0, 'Reachable'),
(1, 'Unreachable'))),
(8, 'Adjacent node',CMN,NML,,,,RO,,) %;
macro
$NML$DATA_LINK_EVENTS =
(5, 0, ENTITY_CIRCUIT, 'Locally initiated state change'),
(5, 1, ENTITY_CIRCUIT, 'Remotely initiated state change'),
(5, 2, ENTITY_CIRCUIT, 'Protocol restart received in maintenance mode'),
(5, 3, ENTITY_CIRCUIT, 'Send error threshold'),
(5, 4, ENTITY_CIRCUIT, 'Receive error threshold'),
(5, 5, ENTITY_CIRCUIT, 'Select error threshold'),
(5, 6, ENTITY_CIRCUIT, 'Block header format error'),
(5, 7, ENTITY_CIRCUIT, 'Selection address error'),
(5, 8, ENTITY_CIRCUIT, 'Streaming tributary'),
(5, 9, ENTITY_CIRCUIT, 'Local buffer too small'),
(5, 10, NO_LOCAL, 'Restart (X.25 protocol)'),
(5, 11, NO_LOCAL, 'State change (X.25 protocol)'),
(5, 12, NO_LOCAL, 'Retransmit maximum exceeded'),
(5, 13, ENTITY_LINE, 'Initialization failure'),
(5, 14, ENTITY_LINE, 'Send failed'),
(5, 15, ENTITY_LINE, 'Receive failed'),
(5, 16, ENTITY_LINE, 'Collision detect check failed'),
(5, 17, NO_LOCAL, 'DTE up'),
(5, 18, NO_LOCAL, 'DTE down') %,
$NML$EVENT_5_PARMS =
(0, 'Old state',CMDC,NML,,,,RO,,
((0, 'Halted'),
(1, 'Istrt'),
(2, 'Astrt'),
(3, 'Running'),
(4, 'Maintenance'))),
(1, 'New state',CMDC,NML,,,,RO,,
((0, 'Halted'),
(1, 'Istrt'),
(2, 'Astrt'),
(3, 'Running'),
(4, 'Maintenance'))),
(2, 'Header',CMDC,NML,,,,RO,,),
(3, 'Selected tributary',CMDC,NML,,,,RO,,),
(4, 'Previous tributary',CMDC,NML,,,,RO,,),
(5, 'Tributary status',CMDC,NML,,,,RO,,
((0, 'Streaming'),
(1, 'Continued send after timeout'),
(2, 'Continued send after deselect'),
(3, 'Ended streaming'))),
(6, 'Received tributary',CMDC,NML,,,,RO,,),
(7, 'Block length',CMDC,NML,,,,RO,,),
(8, 'Buffer length',CMDC,NML,,,,RO,,),
(9, 'DTE',CMDC,NML,,,,RO,,),
(10, 'Reason',CMDC,NML,,,,RO,,
((0, 'Operator command'),
(1, 'Normal operation'))),
(11, 'Old state',CMDC,NML,,,,RO,,
((0, 'On'),
(1, 'Off'),
(2, 'Shut'))),
(12, 'New state',CMDC,NML,,,,RO,,
((0, 'On'),
(1, 'Off'),
(2, 'Shut'))),
(13, 'Parameter type',CMDC,NML,,,,RO,,),
(14, 'Cause',CMDC,NML,,,,RO,,),
(15, 'Diagnostic',CMDC,NML,,,,RO,,),
(16, 'Failure reason',CMDC,NML,,,,RO,,
((0, 'Excessive collisions'),
(1, 'Carrier check failed'),
(2, '** Obsolete **'),
(3, 'Short circuit'),
(4, 'Open circuit'),
(5, 'Frame too long'),
(6, 'Remote failure to defer'),
(7, 'Block check error'),
(8, 'Framing error'),
(9, 'Data overrun'),
(10, 'System buffer unavailable'),
(11, 'User buffer unavailable'),
(12, 'Unrecognized frame destination'))),
(17, 'Distance',CMDC,NML,,,,RO,,),
(18, 'Ethernet header',CMDC,NML,,,,RO,,),
(19, 'Hardware status',CMDC,NML,,,,RO,,) %;
macro
$NML$PHYSICAL_LINK_EVENTS =
(6, 0, ENTITY_LINE, 'Data set ready transition'),
(6, 1, ENTITY_LINE, 'Ring indicator transition'),
(6, 2, ENTITY_LINE, 'Unexpected carrier transition'),
(6, 3, ENTITY_LINE, 'Memory access error'),
(6, 4, ENTITY_LINE, 'Communications interface error'),
(6, 5, ENTITY_LINE, 'Performance error') %,
$NML$EVENT_6_PARMS =
(0, 'Device register',CMDC,NML,,,,RO,,),
(1, 'New state',CMDC,NML,,,,RO,,
((0, 'Off'),
(1, 'On'))) %,
! Define VMS specific events
$NML$VMS_EVENTS =
(128, 0, NO_LOCAL, 'Logging data base change'),
(128, 1, NO_LOCAL, 'DAP CRC error'),
(128, 2, NO_LOCAL, 'Duplicate phase II initialization'),
(128, 3, NO_LOCAL, 'Process creation'),
(128, 4, NO_LOCAL, 'Process termination') %,
$NML$EVENT_128_PARMS =
(0, 'Remote node', CMN, NML,,,,RO,,),
(1, 'Process name', CMDC, NML,,,,RO,,),
(2, 'Process PID', CMDC, NML,,,,RO,,),
(3, 'Process status', CMDC, NML,,,,RO,,) %,
! Event 96.0 is a special event that was put in for the benefit of
! CSSE. It will most likely go away before ship of this product.
! We dont want it included in the 'KNOWN EVENTS' so we therefore set
! it 'NO_LOCAL'.
$NML$LCG_EVENTS =
(96, 0, NO_LOCAL, 'Link closed') %,
$NML$EVENT_96_PARMS =
(0, 'Link information',CMDC,NML,,,,RO,,) %;
%title '' %sbttl ''
! Local Modes:
! Mode:BLISS
! Auto Save Mode:2
! Comment Column:40
! Comment Rounding:+1
! End: