Trailing-Edge
-
PDP-10 Archives
-
BB-L014B-BM
-
autopatch/readme.002
There are 2 other files named readme.002 in the archive. Click here to see a list.
1.0 INTRODUCTION
This is the second Autopatch set. It contains patches for APL-V2 and
TOPS-20-V4. To install Autopatch for the first time, you must first
restore the second save set and follow the instructions found in the
Autopatch Procedures/Reference Manual and the INSTAL.DOC file.
Information specific to each product is recorded in section 5.0 of this
document.
2.0 EXECEPTIONS
+There are new versions of PEP and PEPB in the second save-set. This
version corrects some minor bugs. Please restore them to your system.
+TOPS-20-V4 users should read the T20BWR.002 file which has beware
information about specific edits to the monitor and exec.
+If you are using a model 2020 and will be patching the TOPS-20-V4
product you should use the /TIME switch with the SUBMIT command to
specify a limit of two hours (/TIME:2:00:00). Our experience has been
that one hour may not be quite enough.
+Autopatch is offered as a software maintenance alternative to manually
applying the patches distributed in The Software Dispatch. All PCO's
for the TOPS-20 Monitor and Exec are automatically included in the
versions built with Autopatch. The Autopatch Monitor and Exec include
the source version of these edits. The Software Dispatch provides the
DDT patch version of most of these edits.
Applying the published DDT patch version of an edit to the autopatched
Monitor or Exec is not reliable, not supported and not usually required.
If you find a DDT patch for an edit that is not yet included and you
feel compelled to apply it to the autopatched product, extreme caution
is urged - it may not work!
3.0 RELATED DOCUMENTS
TOPS-10/TOPS-20 Autopatch Procedures/Reference Manual (AA-H729A-TK)
INSTAL.DOC (in Installation Save Set on this tape)
4.0 FILE INDEX
Page 2
Patch Set 002
File Description
README.002 Patch Set 002 Master Documentation File
TAP002.DIR Directory with Checksums of Patch Set 002
PAT202.DPD Patch Directory File for Patch Set 002
APEDIT.RPT Autopatch Edit Report
T20BWR.002 TOPS-20-V4 Edit Beware file
Edit Description Files
APL2S2.D02 APLSF-20-V2 Edit Description File
APL2B2.D02 APL-20-V2 Edit Description File
T20204.D02 TOPS-20-2020-V4 Edit Description File
T20404.D02 TOPS-20-2040-V4 Edit Description File
T20604.D02 TOPS-20-2060-V4 Edit Description File
T20AL4.D02 TOPS-20-KL-ARPA-V4 Edit Description File
T20AS4.D02 TOPS-20-KS-ARPA-V4 Edit Description File
Product Patch and Build LOG Files
APL2B2.L02 LOG file for APL-20
APL2S2.L02 LOG file for APLSF-20
T20204-MED.L02 LOG file for TOPS-20-2020 MEDIUM
T20204-SML.L02 LOG file for TOPS-20-2020 SMALL
T20404-BCH.L02 LOG file for TOPS-20-2040 BATCH
T20404-BIG.L02 LOG file for TOPS-20-2040 BIG
T20404-MED.L02 LOG file for TOPS-20-2040 MEDIUM
T20404-SML.L02 LOG file for TOPS-20-2040 SMALL
T20404-SML-128.L02 LOG file for TOPS-20-2040 SMALL 128K or less
T20604-BIG.L02 LOG file for TOPS-20-2060 BIG
T20604-MAX.L02 LOG file for TOPS-20-2060 MAXIMUM
T20AL4-BIG.L02 LOG file for TOPS-20-KL-ARPA BIG
T20AL4-LGE.L02 LOG file for TOPS-20-KL-ARPA LARGE
T20AL4-MED.L02 LOG file for TOPS-20-KL-ARPA MEDIUM
T20AL4-SML.L02 LOG file for TOPS-20-KL-ARPA SMALL
T20AS4-MED.L02 LOG file for TOPS-20-KS-ARPA MEDIUM
T20AS4-SML.L02 LOG file for TOPS-20-KS-ARPA SMALL
Patch Files
APLS22.R02 APLSF-20-V2 APLS22.REL Patch File
APLB22.R02 APL-20-V2 APLB22.REL Patch File
T202M4.R02 TOPS-20-2020-V4 T202M4.REL Patch File
T204M4.R02 TOPS-20-2040-V4 T204M4.REL Patch File
T206M4.R02 TOPS-20-2060-V4 T206M4.REL Patch File
T20EX4.R02 TOPS-20-V4 (EXEC) T20EX4.REL Patch File
T20LM4.R02 TOPS-20-KL-ARPA-V4 T20LM4.REL Patch File
T20SM4.R02 TOPS-20-KS-ARPA-V4 T20SM4.REL Patch File
Page 3
Modified System Files
MACSYM.MAC
MACSYM.UNV
PROKS.UNV
PROLOG.UNV
STG.MAC
VERSIO.MAC
Patch Dumper Control Files
APL2B2.P02 Restores files from Patch Set #002 for APL-20-V2
APL2S2.P02 Restores files from Patch Set #002 for APLSF-20-V2
T20204.P02 Restores files from Patch Set #002 for TOPS-20-2020-V4
T20404.P02 Restores files from Patch Set #002 for TOPS-20-2040-V4
T20604.P02 Restores files from Patch Set #002 for TOPS-20-2060-V4
T20AL4.P02 Restores files from Patch Set #002 for TOPS-20-KL-ARPA-V4
T20AS4.P02 Restores files from Patch Set #002 for TOPS-20-KS-ARPA-V4
APL2B2.A02 Restores files from all Patch Sets for APL-20-V2
APL2S2.A02 Restores files from all Patch Sets for APLSF-20-V2
T20204.A02 Restores files from all Patch Sets for TOPS-20-2020-V4
T20404.A02 Restores files from all Patch Sets for TOPS-20-2040-V4
T20604.A02 Restores files from all Patch Sets for TOPS-20-2060-V4
T20AL4.A02 Restores files from all Patch Sets for TOPS-20-KL-ARPA-V4
T20AS4.A02 Restores files from all Patch Sets for TOPS-20-KS-ARPA-V4
5.0 PRODUCT DOCUMENTATION
Page 4
APL-20-V2 Product Information PRODUCT CODE:
Patch Set 002 APL2B2
This patch set provides the required files to update APL-20-V2 to edit
level 517.
If you are patching the product for the first time, you must build
several disk areas and obtain some files from the APL-20 distribution
tape. This process is described in the INSTAL.DOC file in the second
save set on this tape and in the Autopatch Procedures/Reference Manual.
The APL2B2.DDC Distribution Dumper Control File found in the
Installation Save Set may be used for this purpose.
A description of each edit is contained in the Edit Description file in
this save set (APL2B2.D02). A sample Patch & Build log file
(APL2B2.L02) is provided. You may want to compare your Build with this
log file.
The files required from this save set to patch this product are:
PAT202.DPD
APLB22.R02
You may use the APL2B2.P02 Patch Dumper Control file to restore files
from this save set. If using Autopatch for the first time on this
product you may use the APL2B2.A02 Patch Dumper Control file to restore
files from all Patch save sets.
Page 5
APLSF-20-V2 Product Information PRODUCT CODE:
Patch Set 002 APL2S2
This patch set provides the required files to update APLSF-20-V2 to edit
level 517.
If you are patching the product for the first time, you must build
several disk areas and obtain some files from the APLSF-20 distribution
tape. This process is described in the INSTAL.DOC file in the second
save set on this tape and in the Autopatch Procedures/Reference Manual.
The APL2S2.DDC Distribution Dumper Control file found in the
Installation Save Set may be used for this purpose.
A description of each edit is contained in the Edit Description file in
this save set (APL2S2.D02). A sample Patch & Build log file
(APL2S2.L02) is provided. You may want to compare your Build with this
log file.
The files required from this save set to patch this product are:
PAT202.DPD
APLS22.R02
You may use the APL2S2.P02 Patch Dumper Control file to restore files
from this save set. If using Autopatch for the first time on this
product you may use the APL2S2.A02 Patch Dumper Control file to restore
files from all Patch save sets.
Page 6
TOPS-20-2020-V4 Product Information PRODUCT CODE:
Patch Set 002 T20204
This patch set provides the required files to update the 2020 version of
the TOPS-20 monitor to edit level 1919 and the EXEC to level 624.
If you are patching the product for the first time, you must build
several disk areas and obtain some files from the TOPS-20 distribution
tape. This process is described in the INSTAL.DOC file in the second
save set on this tape and in the Autopatch Procedures/Reference Manual.
The T20204-XXX.DDC Distribution Dumper Control files found in the
Installation Save Set may be used for this purpose.
A description of each edit is contained in the Edit Description file in
this save set (T20204.D02). Sample Patch & Build log files are also
provided. You may want to compare your Build with this log file.
You should use the /TIME switch on the SUBMIT command to allow for more
than an hour limit (/TIME:2:00:00). Our experience has been that one
hour is not quite enough.
The files required from this save set to patch this product are:
MACSYM.UNV
PAT202.DPD
PROKS.UNV
PROLOG.UNV
STG.MAC
T202M4.R02
T20EX4.R02
VERSIO.MAC
You may use the T20204.P02 Patch Dumper Control file to restore files
from this save set. If using Autopatch for the first time on this
product you may use the T20204.A02 Patch Dumper Control file to restore
files from all Patch save sets.
Page 7
TOPS-20-2040-V4 Product Information PRODUCT CODE:
Patch Set 002 T20404
This patch set provides the required files to update the 2040 version of
the TOPS-20 monitor to edit level 1919 and the EXEC to level 624.
If you are patching the product for the first time, you must build
several disk areas and obtain some files from the TOPS-20 distribution
tape. This process is described in the INSTAL.DOC file in the second
save set on this tape and in the Autopatch Procedures/Reference Manual.
The T20404-XXX.DDC Distribution Dumper Control files found in the
Installation Save Set may be used for this purpose.
A description of each edit is contained in the Edit Description file in
this save set (T20404.D02). Sample Patch & Build log files are also
provided. You may want to compare your Build with this log file.
The files required from this save set to patch this product are:
MACSYM.UNV
PAT202.DPD
PROLOG.UNV
STG.MAC
T204M4.R02
T20EX4.R02
VERSIO.MAC
You may use the T20404.P02 Patch Dumper Control file to restore files
from this save set. If using Autopatch for the first time on this
product you may use the T20404.A02 Patch Dumper Control file to restore
files from all Patch save sets.
Page 8
TOPS-20-2060-V4 Product Information PRODUCT CODE:
Patch Set 002 T20604
This patch set provides the required files to update the 2060 version of
the TOPS-20 monitor to edit level 1919 and the EXEC to level 624.
If you are patching the product for the first time, you must build
several disk areas and obtain some files from the TOPS-20 distribution
tape. This process is described in the INSTAL.DOC file in the second
save set on this tape and in the Autopatch Procedures/Reference Manual.
The T20604-XXX.DDC Distribution Dumper Control files found in the
Installation Save Set may be used for this purpose.
A description of each edit is contained in the Edit Description file in
this save set (T20604.D02). Sample Patch & Build log files are also
provided. You may want to compare your Build with this log file.
The files required from this save set to patch this product are:
MACSYM.UNV
PAT202.DPD
PROLOG.UNV
STG.MAC
T206M4.R02
T20EX4.R02
VERSIO.MAC
You may use the T20604.P02 Patch Dumper Control file to restore files
from this save set. If using Autopatch for the first time on this
product you may use the T20604.A02 Patch Dumper Control file to restore
files from all Patch save sets.
Page 9
TOPS-20-KL-ARPA-V4 Product Information PRODUCT CODE:
Patch Set 002 T20AL4
This patch set provides the required files to update the KL-ARPA version
of the TOPS-20 monitor to edit level 1919 and the EXEC to level 624.
If you are patching the product for the first time, you must build
several disk areas and obtain some files from the TOPS-20 distribution
tape. This process is described in the INSTAL.DOC file in the second
save set on this tape and in the Autopatch Procedures/Reference Manual.
The T20AL4-XXX.DDC Distribution Dumper Control files found in the
Installation Save Set may be used for this purpose.
A description of each edit is contained in the Edit Description file in
this save set (T20AL4.D02). Sample Patch & Build log files are also
provided. You may want to compare your Build with this log file.
The files required from this save set to patch this product are:
MACSYM.UNV
PAT202.DPD
PROLOG.UNV
STG.MAC
T20LM4.R02
T20EX4.R02
VERSIO.MAC
You may use the T20AL4.P02 Patch Dumper Control file to restore files
from this save set. If using Autopatch for the first time on this
product you may use the T20AL4.A02 Patch Dumper Control file to restore
files from all Patch save sets.
Page 10
TOPS-20-KS-ARPA-V4 Product Information PRODUCT CODE:
Patch Set 002 T20AS4
This patch set provides the required files to update the KS-ARPA version
of the TOPS-20 monitor to edit level 1919 and the EXEC to level 624.
If you are patching the product for the first time, you must build
several disk areas and obtain some files from the TOPS-20 distribution
tape. This process is described in the INSTAL.DOC file in the second
save set on this tape and in the Autopatch Procedures/Reference Manual.
The T20AS4-XXX.DDC Distribution Dumper Control files found in the
Installation Save Set may be used for this purpose.
A description of each edit is contained in the Edit Description file in
this save set (T20AS4.D02). Sample Patch & Build log files are also
provided. You may want to compare your Build with this log file.
The files required from this save set to patch this product are:
MACSYM.UNV
PAT202.DPD
PROKS.UNV
PROLOG.UNV
STG.MAC
T20SM4.R02
T20EX4.R02
VERSIO.MAC
You may use the T20AS4.P02 Patch Dumper Control file to restore files
from this save set. If using Autopatch for the first time on this
product you may use the T20AS4.A02 Patch Dumper Control file to restore
files from all Patch save sets.