Trailing-Edge
-
PDP-10 Archives
-
BB-M080I-SM
-
monitor-sources/phyh11.mac
There are 47 other files named phyh11.mac in the archive. Click here to see a list.
; UPD ID= 225, SNARK:<5.MONITOR>PHYH11.MAC.9, 29-Sep-81 09:36:51 by DONAHUE
;TCO 5.1523 - Set CDB offline if can't clear error at CLRRAE
; UPD ID= 1453, SNARK:<5.MONITOR>PHYH11.MAC.8, 20-Jan-81 05:46:32 by WACHS
;TCO 5.1234 ADD DUMMY FOR RETRY MAGTAPE ERRORS IN OPPOSITE DIRECTION
; UPD ID= 578, SNARK:<5.MONITOR>PHYH11.MAC.6, 31-May-80 23:03:10 by DBELL
;TCO 5.1048 - ADD NEW DISPATCH FOR EXTRACTING ADDRESS FROM CCW WORDS
; UPD ID= 482, SNARK:<4.1.MONITOR>PHYH11.MAC.64, 26-Apr-80 11:59:19 by DBELL
;TCO 4.1.1149 - CALL LOWER LEVEL ROUTINES FOR HUNG CALLS
; UPD ID= 361, SNARK:<4.1.MONITOR>PHYH11.MAC.63, 26-Mar-80 11:06:57 by DBELL
;TCO 4.1.1119 - MAKE CHANGES NECESSARY FOR RP20 DISKS
;<4.MONITOR>PHYH11.MAC.62, 20-Sep-79 15:04:36, EDIT BY DBELL
;TCO 4.2476 - ADD DISPATCH FOR UNIT EXISTANCE CHECK
;<OSMAN.MON>PHYH11.MAC.1, 10-Sep-79 15:58:04, EDIT BY OSMAN
;TCO 4.2412 - Move definition of BUGHLTs, BUGCHKs, and BUGINFs to BUGS.MAC
;<4.MONITOR>PHYH11.MAC.60, 17-Aug-79 14:16:00, EDIT BY OSMAN
;CHANGE P2RAE2 TO P2RAEX TO AVOID CONFLICT WITH PHYH2.MAC
;<4.MONITOR>PHYH11.MAC.59, 5-Mar-79 15:45:59, EDIT BY KONEN
;UPDATE COPYRIGHT FOR RELEASE 4
;<2BOSACK>PHYH11.MAC.4, 14-Feb-79 22:32:17, EDIT BY BOSACK
;<2BOSACK>PHYH11.MAC.3, 14-Feb-79 22:27:45, EDIT BY BOSACK
;HAVE CKERR CHECK TAPE CHAR BIT RATHER THAN UNIT TYPE
;<4.MONITOR>PHYH11.MAC.57, 21-Jan-79 17:53:29, Edit by MCLEAN
;ADD SUPPORT CODE FOR DIAG JSYS .DGPDL
;<4.MONITOR>PHYH11.MAC.56, 10-Jul-78 13:20:35, Edit by MCLEAN
;ADD MORE INFO ON RH11LOST INTERRUPT BUGCHK
;<3A.MONITOR>PHYH11.MAC.53, 7-Jul-78 01:47:02, Edit by MCLEAN
;MAKE TM03'S WORK
;<4.MONITOR>PHYH11.MAC.54, 5-Jun-78 13:17:37, Edit by MCLEAN
;<4.MONITOR>PHYH11.MAC.53, 5-Jun-78 13:15:30, Edit by MCLEAN
;<3A-NEW>PHYH11.MAC.52, 26-May-78 16:19:59, Edit by FORTMILLER
;PUT CODE IN FOR DX20 EVEN THOUGH IT MAY NEVER BE USED
;<3.SM10-RELEASE-3>PHYH11.MAC.95, 8-May-78 11:13:12, Edit by MCLEAN
;REMOVE PHYDLT BUGINF MUTTER MUTTER
;<3A.MONITOR>PHYH11.MAC.50, 27-Apr-78 23:15:29, Edit by MCLEAN
;<3A.MONITOR>PHYH11.MAC.49, 27-Apr-78 21:44:09, Edit by MCLEAN
;<3A.MONITOR>PHYH11.MAC.48, 27-Apr-78 21:16:30, Edit by MCLEAN
;MORE READBACKWARDS
;<3A.MONITOR>PHYH11.MAC.47, 27-Apr-78 00:16:26, Edit by MCLEAN
;MAKE READ BACKWARDS WORK
;<3.SM10-RELEASE-3>PHYH11.MAC.94, 24-Apr-78 14:51:52, Edit by MCLEAN
;STORE LH OF WINDOW (INTERESTING PART ON ERROR)
;<3.SM10-RELEASE-3>PHYH11.MAC.92, 2-Apr-78 15:46:30, Edit by MCLEAN
;FIX ERROR RECOVERY TO USE CDBCNI (UNUSED IN PHYH11) TO BE AN
;INDICATOR AS TO WHETHER DOING DATA OP OR NOT ON XFER COMPLETION
;<3.SM10-RELEASE-3>PHYH11.MAC.91, 31-Mar-78 15:04:03, Edit by MCLEAN
;PUT ERROR REGISTER 2 DEFINITION IN CORRECT PLACE
;<3A.MONITOR>PHYH11.MAC.43, 29-Mar-78 21:18:49, Edit by MCLEAN
;<3.SM10-RELEASE-3>PHYH11.MAC.88, 28-Mar-78 00:23:04, Edit by MCLEAN
;<3.SM10-RELEASE-3>PHYH11.MAC.87, 28-Mar-78 00:21:13, Edit by MCLEAN
;FIX CKERR TO RETURN CHANNEL ERROR CORRECTLY
;<3.SM10-RELEASE-3>PHYH11.MAC.86, 7-Mar-78 15:40:47, Edit by MCLEAN
;SOME CODE CLEANUPS
;<3A.MONITOR>PHYH11.MAC.38, 3-Mar-78 16:13:00, Edit by MCLEAN
;<3.SM10-RELEASE-3>PHYH11.MAC.85, 3-Mar-78 13:35:36, Edit by MCLEAN
;FIX UBGOOD CALL
;<3.SM10-RELEASE-3>PHYH11.MAC.32, 22-Feb-78 16:32:23, Edit by MCLEAN
;MAKE IT WORK IF RH IS NOT THERE
;<3.SM10-RELEASE-3>PHYH11.MAC.32, 22-Feb-78 16:32:23, Edit by MCLEAN
;MAKE IT WORK IF RH IS NOT THERE
;<4.MONITOR>PHYH11.MAC.34, 1-Feb-78 14:50:07, Edit by MCLEAN
;FIX PHYALC FOR NEW CALLING SEQ
;<4.MONITOR>PHYH11.MAC.33, 30-Jan-78 21:31:04, Edit by MCLEAN
;ADD CHANGES FOR UNIT GOING ON LINE
;<1MCLEAN>PHYH11.MAC.3, 25-Jan-78 15:19:16, Edit by MCLEAN
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY ONLY BE USED
; OR COPIED IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
;COPYRIGHT (C) 1976,1977,1978,1979 BY DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
SEARCH PROLOG ;PARAMETER FILE
TTITLE (PHYH11,,< - CHANNEL DEPENDENT CODE FOR RH11 CONTROLLER>)
SUBTTL R. MCLEAN (FROM PHYH2 T. HESS,T. WACHS,L. BOSACK)
SEARCH PROKS
SEARCH PHYPAR ;PHYSIO PARAMETERS
SUBTTL PARAMETERS
; DEVICE EPENDENT STUFF
;DEVICE INDEPENDENT REGISTERS
DO.AS==4B5 ;ATTENTION SUMMARY REGISTER
DO.DA==5B5 ;DESIRED ADDRESS REGISTER
DO.DT==6B5 ;DRIVE TYPE REGISTER
DO.LR==1B6 ;LOAD REGISTER ENABLE
DO.DRE==1B9 ;DISABLE RAE STOP
;DEVICE DEPENDENT DEFINITIONS IN THE CDB
RC1CS1==CDBDDP+0 ;CONTROL STATUS 1
RC1DS==CDBDDP+1 ;DRIVE STATUS REGISTER
RC1ER1==CDBDDP+2 ;ERROR REGISTER 1
RC1MR==CDBDDP+3 ;MAINT REGISTER
RC1AS==CDBDDP+4 ;ATTENTION SUMMARY REGISTER
RC1DA==CDBDDP+5 ;DESIRED ADDRESS REGISTER
RC1DT==CDBDDP+6 ;DRIVE TYPE REGISTER
RC1LA==CDBDDP+7 ;LOOK AHEAD REGISTER
RC1SN==CDBDDP+10 ;SERIAL NUMBER REGISTER
RC1OF==CDBDDP+11 ;OFFSET REGISTER
RC1DC==CDBDDP+12 ;DESIRED CYL REGISTER
RC1CA==CDBDDP+13 ;CURRENT CYL REGISTER
RC1ER2==CDBDDP+14 ;ERROR REGISTER 2
RC1ER3==CDBDDP+15 ;ERROR REGISTER 3
RC1EC1==CDBDDP+16 ;ECC REGISTER 1
RC1EC2==CDBDDP+17 ;ECC REGISTER 2
RC1WC==CDBDDP+20 ;WORD COUNT REGISTER
RC1BA==CDBDDP+21 ;CURRENT ADDRESS REGISTER
RC1CS2==CDBDDP+22 ;CONTROL AND STATUS REGISTER 2
RC1CNT==23 ;COUNT OF ABOVE REGISTERS
UBADSW==CDBDDP+23 ;UNIBUS STATUS REGISTER ADDRESS
UBBASA==CDBDDP+24 ;UNIBUS BUS ADDRESS BASE ADDRESS
L.RH2==CDBDDP+RC1CNT-CDBINT+2 ;LENGTH OF RH11 CDB
CHXFR==1B0 ;INDICATE XFER WORD
CHJMP==1B1 ;INDICATE CHANNEL JUMP
CHLST==1B1 ;INDICATE LAST XFER
CHREV==1B2 ;INDICATE REVERSE
CCYADR: POINT 22,T1,35 ;BYTE POINTER TO CCW ADDRESS FIELD
CCYCNT: POINT 11,T1,13 ;BYTE POINTER TO CCW COUNT FIELD
;BITS IN CHANNEL LOGOUT AREA
CS1MPE==1B1 ;MEMORY PARITY ERROR
CS1NSE==1B2 ;NEGATION OF SBUS ERR
CS1NC0==1B3 ;NEGATION OF WORDCOUNT = 0
CS1NXM==1B4 ;NONEXISTANT MEMORY
CS1LTE==1B9 ;LAST TRANSFER ERROR
CS1RHE==1B10 ;RH11 ERROR
CS1LWC==1B11 ;LONG WORD COUNT (RH11 FINISHED BEFORE CHANNEL)
CS1SWC==1B12 ;SHORT WORD COUNT (CHANNEL FINISHED BEFORE RH11)
CS1OVR==1B13 ;OVERRUN (MBOX BUFFER)
;SOFTWARE FLAGS IN FUNCTION (USED BY CHSTRT)
ERETRY==200
RQDUBW==MAXPPB ;NUMBER OF UNIBUS WINDOWS TO ALLOCATE
;RH11 CHANNEL STATUS BITS
;STATUS BITS IN CONTROL AND STATUS 1
RH1SC==1B20 ;SPECIAL CONDITION
RH1TRE==1B21 ;TRANSFER ERROR
RH1CPE==1B22 ;MASS I/O CONTROL PARITY ERROR
RH1PSL==1B25 ;PORT SELECT
RH1UAD==3B27 ;UNIBUS ADDRESS EXTENSION BITS
RH1RDY==1B28 ;READY
RH1IE==1B29 ;INTERRUPT ENABLE
RH1ERR==RH1TRE!RH1CPE ;BITS THAT CAUSE ERRORS
;STATUS BITS IN CONTROL AND STATUS 2
RH1DLT==1B20 ;DATA LATE
RH1WCE==1B21 ;WRITE CHECK ERROR
RH1PE==1B22 ;PARITY ERROR
RH1NED==1B23 ;NON EXISTENT DISK
RH1NEM==1B24 ;NON EX MEMORY
RH1PGE==1B25 ;PROGRAM ERROR
RH1MXF==1B26 ;MISSED TRANSFER
RH1MDP==1B27 ;MASS BUS PARITY ERROR
RH1CLR==1B30 ;CONTROLLER CLEAR (ALSO CLEARS DRIVES)
RH1UNI==7B35 ;UNIT SELECT BITS
; ERROR REGISTER 1 DEFINITIONS
ER.CPE==1B32 ;CONTROL BUS PARITY ERROR
ER.FCE=1B26 ;FRAME COUNT ERROR
RHOFF: BYTE (6)0,12,14,24,16,6
BYTE (6)26,20,30,32,34,36
BYTE (6)40,42,44,46,2,4
BYTE (6)10
; CHANNEL ADDRESS TABLE
RH1CTB: RH11CA ;ADDRESS OF CHANNEL 0
RH21CA ;ADDRESS OF CHANNEL 1
RH1CTZ==.-RH1CTB ;SIZE OF RH11 CHANNEL TABLE
RH1IVT: RH11IV/4 ;UNIBUS ADAPTER #,,INTERRUPT VECTOR ADDRESS CHANNEL 0
RH21IV/4 ;UNIBUS ADAPTER #,,INTERRUPT VECTOR ADDRESS CHANNEL 1
;CHANNEL DISPATCH TABLE FOR RH11
RH2DSP::JRST RH2INI ;0 - INITIATION
RET ;1 - STACK CHAN COMMAND - RETURN FAILURE ON RH11
JRST RH2SIO ;2 - START I/O
JRST RH2POS ;3 - POSITION REQUEST
JRST RH2LTM ;4 - RETURN BEST XFER
JRST RH2INT ;5 - INTERRUPT PROCESSING
JRST RH2CCW ;6 - MAKE CHANNEL XFER WORD
JRST RH2HNG ;7 - TRANSFER HUNG
JRST RH2RST ;10 - RESET CHANNEL
JRST RH2CHK ;11 - PERIODIC CHECK
JRST EXTKDB ;12 - CHECK UNIT EXISTANCE
JRST RH2CCA ;13 - EXTRACT ADDRESS FROM CCW WORD
;DUMMIES
RH2LTM: RET
SUBTTL INITIALIZATION
RH2INI: MOVE Q1,RH1CTB ;GET CHANNEL ADDRESS
PUSH P,[0] ;SAVE ON PDL
RH2NCH: MOVE T1,Q1 ;GET ADDRESS OF DEVICE
CALL UBGOOD ;CHECK TO SEE IF IT EXISTS
JRST RH2NOU ;NOT HERE FORGET IT
MOVEI T1,L.RH2 ;GET LENGTH OF CDB
CALL PHYALC ;ALLOCATE SOME STORAGE
JRST PA1 ;FAILURE QUIT INITALIZATION
MOVEI P1,-CDBINT(T1) ;CDB BASE ADDRESS TO P1
MOVEM P1,CHNTAB(P4) ;SAVE CDB IN CHANNEL TABLE
HRRZM P4,CDBADR(P1) ;STORE CHNTAB INDEX
AOS P4 ;ADVANCE TO NEXT
MOVE T2,0(P) ;FIND CHANNEL NUMBER
HLRZ T1,RH1CTB(T2) ;GET UNIBUS ADAPTER NUMBER
MOVEI T2,RQDUBW ;NEED WINDOWS
CALL ALUBWA ;ALLOCATE WINDOW
BUG(NOUBWA)
MOVEM T1,UBADSW(P1) ;SAVE ADDRESSES
MOVEM T2,UBBASA(P1) ;SAVE UNIBUS BASE ADDRESS
MOVEI T1,.CTRH3 ;SET TYPE
DPB T1,CSYTYP ;..
MOVEI T4,RC1CS1(P1) ;START THE SAVE OF ADDRESSES
MOVNI T1,RC1CNT ;GET SIZE OF TABLE
MOVE T2,[POINT 6,RHOFF] ;GET ADDRESS TABLE
RH11DL: ILDB T3,T2 ;FIND THE OFFSET
ADD T3,Q1 ;CREATE AN ADDRESS
MOVEM T3,0(T4) ;STORE IN CDB
AOS T4 ;POINT TO NEXT
AOJL T1,RH11DL ;DO ALL REGISTERS
MOVEI T3,CDBINT(P1) ;ADDRESS FOR XPCW ON INTERRUPT
HRLI T3,(<XPCW>) ;BUILD INSTRUCTION
MOVE T1,0(P) ;GET CHANNEL NUMBER
HLRZ T2,RH1CTB(T1)
HRRZ T1,RH1IVT(T1) ;GET VECTOR
ADD T1,SMTEPT(T2) ;AND TABLE ADDRESS
MOVEM T3,0(T1) ;STORE XPCW IN INTERRUPT VECTOR LOCATION
MOVEI T3,CDBINT+4(P1) ;SET JUMP ADDRESS
MOVEM T3,CDBINT+3(P1) ;SET IN XFER VECTOR
SETZM CDBINT+2(P1) ;SET FLAGS TO 0
MOVEI T1,KIEPT ;ADDRESS OF CHANNEL ICP AREA
HRRM T1,CDBICP(P1) ;STASH IN CDB
; ...
MOVE T1,[MOVEM P1,CDBSVQ]
ADDI T1,0(P1) ;INSTRUCTION TO STORE P1 IN CDB
MOVEM T1,CDBINT+4(P1) ;BUILD INTERRUPT CODE
MOVE T1,[JSP P1,PHYINT]
MOVEM T1,CDBINT+5(P1) ;DISPATCH TO PHYSIO
MOVE T1,[BLT 17,17] ;INSTRUCTION TO RESTORE ACCUMULATORS
MOVEM T1,CDBJEN(P1) ;PUT IN CDB
MOVEI T1,CDBRST(P1) ;BUILD DATAO CDBRST, TO RESET THE
MOVEI T1,CDBINT(P1) ;ADDRESS OF INTERRUPT PC
HRLI T1,(<XJEN 0>) ;BUILD XJEN INSTRUCTION
MOVEM T1,CDBJEN+1(P1) ;STORE
MOVEI T1,RH2DSP ;INSERT DISPATCH VECTOR
MOVEM T1,CDBDSP(P1) ;SET UP DISPATCH
;NOW FIND UNITS & TYPES
MOVE Q3,[-MAXRH,,CDBUDB] ;AOBJN POINTER TO UDB TABLE
ADDI Q3,0(P1) ;RELOCATE POINTER
MOVEM Q3,CDBCUN(P1) ;STORE IN CDB
MOVEM Q3,CDBIUN(P1) ;...
SETOM CDBXFR(P1) ;INDICATE CHANNEL FREE
MOVEI Q2,0 ;FIRST UNIT #
RH2UNL: MOVEI T2,RH1CLR ;RESET CONTROLLER ERRORS
WRIO T2,@RC1CS2(P1)
SETZM P3 ;IN CASE NOT WANTED
SETOM P5 ;INDICATE TO CREATE ALL UDBS AND KDBS
CALL RH2UNS ;SELECT A UNIT
RH2NXU: MOVEM P3,0(Q3) ;STORE IN CDB IF ANY (0 IF NONE)
AOS Q2 ;NEXT UNIT #
AOBJN Q3,RH2UNL ;KEEP GOING
MOVE T1,CDBIUN(P1) ;CHECK IF ANY DEVICES FOUND.
SETOM CDBXFR(P1) ;SET NO TRANSFER IN PROGRESS
SETZ T2,0 ;UNIT 0
RH2CKU: SKIPE (T1) ;UNIT PRESENT?
JRST RH2NXT ;YES, GO ON TO NEXT CHANNEL
AOS T2 ;NEXT UNIT NUMBER IN CLEAR REQUEST
AOBJN T1,RH2CKU ;NO, LOOP FOR MORE
MOVSI T1,(CS.OFL) ;NONE PRESENT, MARK OFFLINE.
IORM T1,CDBSTS(P1) ; ...
JRST RH2NOU ;NO UNIT FOUND
;THE FOLLOWING SEQUENCE IS REQUIRED BECAUSE THE RH11 REQUIRES
;THAT A CLEAR INSTRUCTION BE FOLLOWED IMMEDIATELY BY A SELECTION
;OF AN EXISTANT UNIT NUMBER OTHERWISE ANY ATTEMPT TO ACCESS
;A REGISTER THAT IS NOT IN THE RH (CS1) WILL CAUSE
;MASSBUS PARITY ERRORS.
RH2NXT: MOVEI T1,RH1CLR ;CLEAR RH11
WRIO T1,@RC1CS2(P1) ;ISSUE CLEAR
WRIO T2,@RC1CS2(P1) ;CLEAR CONTROLLER
MOVEI T1,RH1IE+RH1TRE ;RESET AND ENABLE INTERRUPTS
WRIO T1,@RC1CS1(P1)
RH2NOU: AOS Q1,0(P) ;LOOK AT NEXT AND RESTORE DEVICE CODE
CAIL Q1,RH1CTZ ;BEYOND LAST?
JRST PA1 ;PRUNE AND EXIT
MOVE Q1,RH1CTB(Q1) ;GET NEXT CHANNEL ADDRESS
JRST RH2NCH ;TRY NEXT
; ROUTINE TO DETERMINE THE SPECIFIC UNIT TYPES AND
; REQUEST KDB AND UDB POINTERS BE SET UP
RH2UNS::WRIO Q2,@RC1CS2(P1) ;SET UNIT NUMBER
MOVEI T1,1 ;ISSUE A NOP TO GET NED
WRIO T1,@RC1CS1(P1)
RDIO T1,@RC1CS2(P1) ;CHECK FOR ERROR
TRNE T1,RH1NED ;NON EX DEVICE?
RET ;YES, NEXT UNIT
RH2UNA: RDIO T1,@RC1DT(P1) ;GET DRIVE TYPE
LDB T1,[POINT 9,T1,35] ;GET DEVICE TYPE CODE
CAIG T1,TY.RPH ;WITHING RP04,5,6 RANGE?
CAIGE T1,TY.RPL ; ??
SKIPA ;NO
JRST RH2IRP ;YES - INITIALIZE IT
CAIN T1,TY.RS4 ;RS04 TYPE?
JRST RH2IRS ;YES - INITIALIZE IT
CAIN T1,TY.DXA ;DX20 TYPE?
JRST RH2IDX ;YES, INITIALIZE IT
CAIG T1,TY.T3H ;WITHIN TM03 RANGE?
CAIGE T1,TY.T3L ;
SKIPA ;NO
JRST RH2ITM ;YES
CAIG T1,TY.T2H ;GREATER THAN HIGHEST TM02 TYPE
CAIGE T1,TY.T2L ;OR LOWER THAN LOWEST?
RET ;YES - NOT TM02
JRST RH2ITM ;IS TM02 - GO INITIALIZE
;ROUTINE TO INVOKE RP04/RS04 INITIATION
RH2IRS: SKIPA T1,[.UTRS4] ;RS04 TYPE
RH2IRP: MOVEI T1,.UTRP4 ;RP04 TYPE
CALL FNDUTP ;FIND TABLE ENTRY
CALL UDSINI(T1) ;CALL INITIALIZE IF FOUND
RET ;ADVANCE TO NEXT UNIT
;HERE TO INITIALIZE A DX20
RH2IDX: MOVX T1,.UTDXA ;SEARCH FOR
JRST RH2ITD ; A DX20
;HERE TO INITIALIZE A TM02
RH2ITM: MOVEI T1,.UTTM2 ;SEARCH FOR TM02
RH2ITD: MOVEI P2,0 ;IN CASE NOT FOUND IN TABLES
CALL FNDUTP ; ...
CALL UDSINI(T1) ;FOUND - CALL INITIALIZE, RETURN KDB IN P2
MOVE P3,P2 ;COPY KDB TO WHERE COMMON CODE WANTS IT
RET ;LOOP FOR MORE
;ROUTINE TO SCAN CHANNEL/UNIT TABLES FOR TYPE GIVEN IN T1
;RETURNS TABLE ENTRY IN T1 (SKIP RETURN ON NOT FOUND)
FNDUTP: MOVE T2,[PHYUNL,,PHYUNT] ;ENTRY FOR UNIT TABLE
FNDTPL: HLRZ T3,0(T2) ;GET LH = TYPE CODE
CAME T1,T3 ;TYPES MATCH?
AOBJN T2,FNDTPL ;NO - TRY NEXT
JUMPGE T2,RSKP ;SKIP RETURN IF NO MATCH
HRRZ T1,0(T2) ;MATCH - GET DISPATCH ADDRESS
RET ;RETURN
SUBTTL START I/O AND POSITIONING
;HERE TO START POSITIONING (P3 := UDB)
RH2POS: HRRZ T1,UDBDSP(P3) ;ADDRESS OF DEVICE ROUTINE
JRST UDSPOS(T1) ;START IT
;HERE TO START ACTUAL OPERATION (P3 := UDB , P4 := IORB)
RH2SIO: HRRZ T1,UDBDSP(P3) ;DISPATCH TO DEVICE CODE
CALL UDSSIO(T1) ;ATTEMPT TO START IO
JRST CLRCHL ;LOSE
RETSKP ;WIN
SUBTTL HUNG, RESET AND CHECK ENTRIES
;HERE ON A HUNG TRANSFER
;CALLED WITH PI OFF
RH2HNG: CALL CLRRAE ;CLEAR POSSIBLE RAE
MOVEI T1,RH1CLR ;CLEAR RH11
WRIO T1,@RC1CS2(P1)
WRIO T2,@RC1CS2(P1)
CALL CLRCHL ;RESET THE CHANNEL
HRRZ T1,UDBDSP(P3) ;GET DISPATCH ADDRESS
CALLRET UDSHNG(T1) ;CLEAR THE CONTROLLER AND UNIT ALSO
;HERE TO RESET THE CHANNEL AND ALL UNITS
;T1/ 0 TO RESET JUST THE CHANNEL
;T1/ 1 FOR FULL RESET
RH2RST: JUMPE T1,CLRCHL ;SIMPLE RESET
JRST RH2HNG
;HERE EVERY NOW AND THEN (ABOUT 1 SEC) TO CHECK PIA.
RH2CHK: MOVSI T1,(CS.OFL) ;CHECK FOR OFF LINE
TDNE T1,CDBSTS(P1)
RET ;OFF LINE IGNORE THIS REQUEST
MOVEI T1,RH1IE ;CHECK FOR INTERRUPT ENABLE
TIOE T1,@RC1CS1(P1) ;ON?
RET ;YES ALL OK
MOVE T2,RC1CS1(P1) ;GET FAILURE ADDRESS
BUG(PH1PIE,<<T2,D>>)
BSIO T1,@RC1CS1(P1) ;SET INTERRUPT ENABLE (THIS WILL CAUSE IMMEDIATE INTERRUPT!)
RET
SUBTTL CHANNEL UTILITY ROUTINES
;DUMMY ROUTINE TO SATISYY GLOBALS
REVCCW::RET
;ROUTINE TO READ A MASS-BUSS REGISTER
;CALL - C(T2) := REGISTER TO BE READ
; C(P3) := UDB POINTER
; C(P1) := CDB POINTER
;RETURNS VALUE IN T1 , PRESERVES T4
RDREG:: HRRZ T3,UDBAKA(P3) ;GET UNIT #
SKIPL T2 ;INTERNAL REGISTER?
TLO T2,(DO.DRE) ;NO - TRY FIRST WITH DRAES ON
TLOA T2,(T3) ;SET UNIT NUMBER
RDREG3::TLO T2,<(DO.DRE)>(Q2) ;UNIT # IN Q2
LDB T1,[POINT 3,T2,17] ;GET THE UNIT NUMBER
WRIO T1,@RC1CS2(P1) ;SET THE UNIT NUMBER
RDREGX: MOVEI T3,^D10 ;INITIALIZE RETRY COUNTER
RDREGL: LDB T1,[POINT 6,T2,5] ;GET THE REGISTER NUMBER
ADD T1,P1 ;POINT TO REGISTER ADDRESS
RDIO T1,@RC1CS1(T1) ;READ REGISTER
PUSH P,T1 ;SAVE RESULT
RDIO T1,@RC1CS2(P1) ;CHECK FOR DRIVE
TRNE T1,RH1NED ;NON EX DISK?
JRST RDRAE ;YES - BAD NEWS
RDRAE1:
RDIO T1,@RC1CS1(P1) ;READ STATUS REGISTER
TRNE T1,RH1CPE ;CONTROL BUS PAR ERR?
JRST RDREGE ;YES - ERROR
RDEXIT: POP P,T1 ;RSTORE RESULT
ANDI T1,177777 ; CLEAR OUT GARBAGE
RET ;EXIT
;HERE WHEN CBPE OR MISSING TRA
RDREGE: SOJG T3,RDREGA ;LOOP IF RETRY STILL POSITIVE
TLZ T2,(DO.DRE) ;TRY ONE MORE TIME - IF RAE, BOMB WORLD
JUMPL T3,RDEXIT ;IF NOW NEGATIVE, DEPART, TRAGIC ERROR
RDREGA: POP P,T1 ;RESTORE REGISTER
JRST RDREGL ;TRY AGAIN
;HERE WHEN A REGISTER ACCESS ERROR IS DETECTED
RDRAE: PUSH P,T2 ;SAVE ANOTHER REGISTER
TLNE T2,(DO.DRE) ;DRAES?
JRST RDRAE2 ;YES - JUST CLEAR RAE
BUG(P1NED1,<<T1,D>,<T2,D>>)
CALL CLRRAE ;RESET RAE
POP P,T2 ;RESTORE REGISTERS
JRST RDEXIT ;ALL WE COULD DO...
RDRAE2: CALL CLRRAE ;CLEAR ERROR
POP P,T2
JRST RDRAE1 ;CONTINUE ATTEMPT
;ROUTINE TO WRITE A MASS-BUSS REGISTER
;CALL - C(T2) := REGISTER TO BE WRITTEN & DATA
; C(P1) := CDB , C(P3) := UDB
;PRESERVES T1,T4
WTREG:: HRRZ T3,UDBAKA(P3) ;GET UNIT #
TLOA T2,(T3) ;SET IN LHS AND LR ENABLE
WTREG3::TLO T2,(Q2) ;SET LR AND UNIT NUMBER FROM Q2
PUSH P,T1 ;SAVE A REGISTER
HLRZ T1,T2
ANDI T1,7 ;MAKE UNIT NUMBER
WRIO T1,@RC1CS2(P1) ;SET UNIT NUMBER
SKIPA
WTREGX: ;WRITE A REGISTER WHEN THE DRIVE NUMBER DOESNT MATTER
PUSH P,T1 ;SAVE REGISTER
LDB T1,[POINT 6,T2,5] ;GET THE COMMAND NUMBER
SKIPN T1 ;SET INTERRUPT ENABLE IF REGISTER 0
IORI T2,RH1IE
ADD T1,P1 ;FIND ADDRESS OF REGISTER
WRIO T2,@RC1CS1(T1) ;WRITE THE REGISTER
RDIO T1,@RC1CS1(P1) ;READ THE STATUS BACK
TRNE T1,RH1NED ;NON EX DISK?
JRST WTRAE ;YES - BAD NEWS
RDIO T1,@RC1ER1(P1) ;CHECK FOR CONTROL BUS PARITY ERRORS
TRNE T1,ER.CPE ;YES?
BUG(P11PAR,<<T1,D>,<T2,D>>)
POP P,T1 ;NO - RESTORE REGISTER
RET ;RETURN
;HERE WHEN NED ON WRITE
WTRAE: PUSH P,T3 ;SAVE REGISTER
RDIO T3,@RC1CS1(P1)
BUG(P2RAEX,<<T1,D>,<T2,D>,<T3,D>>)
MOVE T3,T2 ;SAVE ATTEMPTED REGISTER
CALL CLRRAE ;CLEAR RAE
MOVE T2,T3 ;RESTORE
POP P,T3 ;RESTORE
POP P,T1
RET
;HERE TO CLEAR RAE
CLRRAE: SETZ T2,0 ;STOP CURRENT TRANSFER
MOVE T1,CDBIUN(P1) ;GET UNIT TABLE
NOTQUI: MOVEI T4,RH1CLR ;CLEAR RH
WRIO T4,@RC1CS2(P1)
WRIO T2,@RC1CS2(P1) ;WRITE UNIT NUMBER
AOBJN T1,CLRRA1 ;TRY NEXT SLOT
MOVSI T1,(CS.OFL) ;SET IT OFFLINE
IORM T1,CDBSTS(P1)
BUG(CLRACE)
JRST XINT ;DISMISS THE INTERRUPT
CLRRA1: RDIO T4,@RC1CS1(P1) ;FORCE AN ERROR BY GOING TO DRIVE
MOVEI T4,RH1NED ;CHECK TO SEE IF IT IS STILL THERE
TIOE T4,@RC1CS2(P1)
AOJA T2,NOTQUI ;NOT QUITE THIS ONE DISAPPEARED
MOVEI T2,RH1TRE!RH1IE ;CLEAR CONTROLLER ONLY
WRIO T2,@RC1CS1(P1) ;CLEAR
RET
;ROUTINE TO CLEAR RH20 CONTROLLER
CLRCHL::
ZAPCHL::MOVEI T1,RH1TRE!RH1IE ;RESET INTERRUPTING BITS
WRIO T1,@RC1CS1(P1)
RET ;RETURN
;ROUTINE TO START CHANNEL I/O
;CALLED WITH PI OFF
;C(T2) := DATAO , C(Q1) := FUNCTION , C(P3) := UDB POINTER
;C(Q1) = -1 IMPLIES ONLY DATAO FROM T2
;GIVES SKIP RETURN TO SHOW ALL OK
CHSTRT::SKIPE T2 ;CHECK FOR VALID OPS
SKIPN Q1 ; ...
BUG(RH1ICF)
HRRZ T1,UDBAKA(P3) ;GET UNIT NUMBER
WRIO T1,@RC1CS2(P1) ;SET UNIT NUMBER SELECT
CAMN Q1,[EXP -1] ;NON CHANNEL FUNCTION
JRST CHST2 ;DO JUST 1 DATAO
CAIGE Q1,50 ;DATA TRANSFER OPERATION?
JRST CHST1 ;NO
SETOM CDBCNI(P1) ;INDICATE NOW DOING DATA XFER OPERATION
PUSH P,T2 ;SAVE DATAO
PUSH P,UBADSW(P1) ;SAVE ADDRESS OF UNIBUS WINDOW
PUSH P,UBBASA(P1) ;SAVE PDP11 ADDRESS
PUSH P,Q2 ;SAVE ANOTHER REGISTER
MOVSI T2,(CS.ACL) ;TOGGLE CCW LIST
XORM T2,CDBSTS(P1)
MOVEI T1,CDBCCL(P1) ;YES - DO SETUP
MOVEI T2,CDBCCL+1(P1)
TRZN Q1,ERETRY ;ECC RETRY?
CALL PHYXFL ;NO - GET HEAD OF TRANSFER LIST
MOVE T4,T1 ;SAVE VIRTUAL ADDRESS
MAP T1,(T1) ;GET PHYSICAL ADDRESS
TLZ T1,777760 ;FLUSH ACCESS BITS ETC
TLO T1,(CHJMP) ;BUILD CHANNEL JUMP
HRRZ T3,CDBICP(P1) ;AND STORE IN
MOVEM T1,(T3) ;CHANNEL ICPC
SETZM 1(T3) ;CLEAR CS1
MOVE T1,0(T4) ;SET UP THE ADDRESS DEPENDENT REGISTERS
MOVEM T1,2(T3) ;SAVE INITIAL CCW
MOVSI T3,(CHLST) ;SET LAST TRANSFER
IORM T3,-1(T2) ;IN CCW LIST
SETZ Q2,0 ;SET BYTE COUNT TO 0
TLNE T1,(CHREV) ;CHECK FOR REVERSE READ
JRST [ MOVEI T2,<RQDUBW-1>*4000+2 ;FIND END OF ADDRESS SPACE
ADDM T2,UBBASA(P1) ;UPDATE POINTER
MOVEI T2,RQDUBW-1 ;ALSO WINDOW POINTER
ADDM T2,UBADSW(P1)
JRST .+1]
LDB T2,CCYADR ;FIND THE CURRENT ADDRESS
ANDI T2,777 ;FIND A UNIBUS ADDRESS
LSH T2,2 ;MAKE INTO UNIBUS ADDRESS
ADD T2,UBBASA(P1) ;GET THE UNIBUS OFFSET
WRIO T2,@RC1BA(P1) ;SET THE BUS ADDRESS
LSH T2,-^D8 ;MOVE HIGH ORDER ADDRESS BITS TO CONTROL
ANDI T2,1400 ;CORRECT POS FOR CONTROL STATUS REG
IORM T2,Q1 ;STORE IN COMMAND REGISTER WORD
CHSLP: MOVE T1,0(T4) ;GET CHANNEL COMMAND
LDB T2,CCYCNT ;GET THE COUNT
MOVNS T2 ;SET TO NEGATIVE
LSH T2,1 ;MAKE PDP11 WORD COUNT
ADD Q2,T2 ;UPDATE WORD COUNT
LDB T2,CCYADR ;GET REST OF ADDRESS
SKIPN T2
BUG(RH11CC)
LSH T2,-^D9 ;GET PAGE NUMBER
MOVSI T3,(US.TAP) ;MAGTAPE?
TDNE T3,UDBSTS(P3)
JRST [ TLNE T1,(CHREV) ;YES CHECK FOR READ/REVERSE
TROA T2,UNBVBT!UNBRPW ;SET READ/PAUSE WRITE
TRO T2,UNBVBT ;NOT BACKWARDS ONLY VALID BIT
JRST .+2]
TRO T2,UNBVBT!UNB36B ;SET 36BIT TRANSFER AND VALID
WRIO T2,@UBADSW(P1) ;WRITE THE UNIBUS STATUS REGISTER
TLNE T1,(CHREV) ;REVERSE?
SOSA UBADSW(P1) ;YES DOWN COUNT
AOS UBADSW(P1) ;POINT TO THE NEXT UNIBUS WINDOW
TLNN T1,(CHLST) ;LAST?
AOJA T4,CHSLP ;NO -- DO NEXT WINDOW
WRIO Q2,@RC1WC(P1) ;YES -- WRITE WORD COUNTER
POP P,Q2 ;RESTORE
POP P,UBBASA(P1) ;RESTORE PDP11 ADDRESS
POP P,UBADSW(P1)
POP P,T2 ;RECOVER DATAO
CHST1: CALL WTREG ;WRITE REGISTER
MOVEM Q1,CDBICR(P1) ;SAVE INITIAL TCR FOR LOGGER
MOVE T2,Q1 ;GET CONTROL REGISTER
CHST2: CALL WTREG ;WRITE AND START WORLD
RETSKP ;INDICATE SUCCESS
;ROUTINE TO GENERATE A CHANNEL XFER WORD FOR THE RH11
;CALL - C(T1) := MODE,,+COUNT(1B0 IF BACKWARDS) , C(T2) := PHYSICAL-ADDRESS
;RETURNS+1(ALWAYS):
;T1/ CCW FOR THIS TRANSFER
;NOTE: THE MAXIMUM TRANSFER WHICH WILL ALWAYS WORK IS 1 PAGE.
; THE CALLER IS EXPECTED TO WORRY ABOUT PAGE CROSSING PROBLEMS
RH2CCW: PUSH P,T1 ;SAVE ARGUMENT
HRRZ T3,T1 ;GET WORD COUNT
HLRZS T1 ;GET MODE IN CORRECT PLACE
TRZ T1,(1B0) ;CLEAR BACKWARDS BIT FROM MODE
CAIN T1,IRMWRD ;CHECK FOR WORD MODE
JRST RH2CW1 ;YES SKIP JUNK
SKIPLE T1 ;CHECK MODE FOR LEGALITY
CAILE T1,IRMMAX ; ...
JRST [ BUG(PH1IHM)
MOVEI T1,IRMWRD ;ASSUME WORD MODE
JRST .+1]
IDIV T3,MODTAB(T1) ;CONVERT TO WORDS
SKIPE T4 ;ROUND?
AOS T3 ;YES
RH2CW1: POP P,T4 ;GET ARGUMENT BACK
MOVSI T1,(CHXFR) ;BUILD CCW
DPB T3,CCYCNT ;STORE COUNT IN T1
DPB T2,CCYADR ;STORE ADDRESS IN T1
SKIPGE T4 ;BACKWARDS?
TLO T1,(CHREV) ;YES
RET ;RETURN
;RH2CCA - EXTRACT THE PHYSICAL MEMORY ADDRESS FROM A CCW TRANSFER WORD.
;ARGUMENTS:
; T1/ CCW WORD
;RETURNS:
; T1/ ADDRESS, OR ZERO IF NONE
RH2CCA: LDB T1,CCYADR ;GET ADDRESS FROM CCW WORD
RET ;DONE
;ROUTINE TO DETERMINE IF ANY CHANNEL DEPENDENT ERROR OCCURED
;RETURN +1 IF ERROR , +2 IF NONE
CKERR:: RDIO T1,@RC1CS1(P1) ;GET RH11 STATUS
ANDI T1,RH1ERR ;SEE IF ERRORS IN CONI
MOVSI T3,(US.TAP) ;CHECK FOR MAGTAPE
TDNN T3,UDBSTS(P3) ;TAPE?
JRST CKERR2 ;NO -- DON'T CHECK FOR FCE
MOVEI T3,ER.FCE ;CHECK FOR FRAME COUNT ERROR
TIOE T3,@RC1ER1(P1) ;CHECK REGISTER
JRST CKERR3 ;YES -- BUT IT IS OK
CKERR2: SKIPGE CDBXFR(P1) ;DATA TRANSFER?
JRST [ JUMPN T1,CKERR1 ;NO - CONI ERRORS
RETSKP] ;NO TO BOTH, RETURN GOOD
SKIPE T1 ;DATA TRANSFER, CHECK CONI ERRORS
CALL CKERR1 ;YES - FLAG AND DO CHANNEL CHECKS
CKERR3: HRRZ T1,CDBICP(P1) ;NONE IN CONI, CHECK CHANNEL
SKIPN T1,1(T1) ;GET STATUS WORD 1
JRST CKERR1 ;NOT STORED, CALL IT AN ERROR
TLNE T1,(CS1MPE!CS1NXM!CS1RHE!CS1OVR) ;OR OTHER DEFINITE ERRORS?
JRST [ TLNE T1,(CS1MPE) ;A PARITY ERROR?
AOS CDBPAR(P1) ;YES - NOTE
TLNE T1,(CS1NXM) ;NONEXISTANT MEMORY?
AOS CDBNXM(P1) ;YES - NOTE
TLNE T1,(CS1OVR) ;AN OVERRUN?
AOS CDBOVR(P1) ;YES - NOTE
CALL CKERR1 ;INDICATE SOME ERROR HAPPENED
JRST .+1] ;AND CONTINUE WITH LENGTH ANALYSIS
MOVSI T2,(CS1LWC!CS1SWC) ;WORD COUNT ERROR BITS
MOVSI T3,(US.TAP) ;MAGTAPE?
TDNN T3,UDBSTS(P3)
TLNN T1,(CS1LWC) ;CHECK FOR LONG WORD COUNT
JRST CKERR4 ;NO CHECK FOR ERROR RETURN
MOVSI T1,(IS.RTL) ;FLAG LENGTH ERROR IN IORB
IORM T1,IRBSTS(P4) ; ...
CKERR1: MOVSI T1,(IS.DVE) ;DECLARE A DEVICE ERROR
IORM T1,IRBSTS(P4) ; ...
RET
CKERR4: MOVSI T1,(IS.DVE) ;ERROR SET?
TDNE T1,IRBSTS(P4)
RET ;YES RETURN BAD
RETSKP ;NOPE ALL GOOD
;ROUTINE TO GET CONI AND DATAI'S ON ERROR
;RETURNS T1=RC1CS1, T2=RC1CS2 T3=UBA MAP REGISTER,,UBA STATUS
ERRCNI::HRRZ T1,CDBICP(P1) ;GET CHANNEL LOGOUT AREA
DMOVE T2,(T1) ; CS0,1
DMOVEM T2,CDBCS0(P1) ;SAVE
MOVE T2,2(T1) ;GET CS2
MOVEM T2,CDBCS2(P1) ;SAVE
MOVE T1,(T1) ;GET ICCW
TLNE T1,(CHXFR) ;IF NOT JUMP,
JRST ERCNI1 ;DON'T TRY FOR CCWS
LDB T1,CCYADR ;GET ADDRESS PART OF JUMP
LSH T1,-PGSFT ;AS A PAGE
PIOFF ;INTERLOCK WINDOW
CALL MAPRCA ;MAP THIS PAGE
HRRZ T2,CDBICP(P1) ;GET CHAN BLOCK AGAIN
MOVE T3,(T2) ;GET JUMP CCW BACK
ANDI T3,777 ;GET ADDRESS WITHIN PAGE
ADD T3,T1 ;GET INDEX INTO WINDOW PAGE
MOVE T4,(T3) ;GET FIRST POSSIBLE CCW
MOVEM T4,CDBCC1(P1) ;SAVE IN CDB
ADDI T3,1 ;INCREMENT POINTER
MOVEI T4,0 ;DONT STORE GARBAGE IF OVERFLOW
TRNE T3,777 ;STILL WITHIN WINDOW BOUND?
MOVE T4,(T3) ;YES - FETCH SECOND POSSIBLE CCW
MOVEM T4,CDBCC1+1(P1) ;SAVE IN CDB
CALL UNMRCA ;FREE WINDOW
PION ;ALLOW INTERRUPTS AGAIN
ERCNI1: RDIO T1,@RC1CS1(P1) ;READ STATUS 1
RDIO T2,@RC1CS2(P1) ;READ STATUS 2
HLLZ T4,UBADSW(P1) ;GET ADDRESS OF UBA
RDIO T4,UNBSTW(T4)
RDIO T3,@UBADSW(P1) ;GET STATUS
HLRS T3 ;SAVE INTERESTING BITS
HRL T3,T4 ;PUT TOGETHER
RET
SUBTTL INTERRUPT ROUTINE
;ENTER FROM PHYSIO W/ C(P1) := CDB CAUSING INTERRUPT.
RH2INT: RDIO T2,@RC1CS2(P1) ;READ STATUS 2
TRNN T2,RH1NED ;IS NED SET?
JRST RH2IN1 ;NO - GO ON
BUG(P1NED3,<<T1,D>,<T2,D>>)
CALL CLRRAE ;CLEAR RAE
RH2IN1: MOVSI T2,(DO.AS) ;SET TO READ ATTENTION SUMMARY REGISTER
CALL RDREGX ; READ (ANY UNIT WILL DO)
MOVEI Q1,0 ;INITIAL UNIT #
ANDI T1,377 ;MASK OUT IMPOSSIBLE BITS
TRNN T1,377 ;ANY ATTENTION ON?
JRST NOATTN ;NO - CHECK DATA TRANSFER
ATCHKN: LSHC T1,-1 ;SHIFT 1 BIT OVER
JUMPGE T2,ATCHK2 ;JUMP IF NOT THIS UNIT
PUSH P,T1 ;SAVE REMAINDER
HRRZ T1,Q1 ;GET UNIT #
CALL SETUDB ;SET UP P3 := UDB ADDRESS, T2 := DISPATCH
JUMPE P3,ATNXU ;SPURIOUS INTERRUPT IF NO UNIT THERE
SETZ P4, ;P4=0 IF NO ERRORS
CALL UDSATN(T2) ;INFORM LOWER LEVEL
;SETS LH(Q1) TO -1 IF POS DONE INTERRUPT
JUMPN P4,ATNIRB ;IF DONE OR AN ERROR, GO RETURN
ATCHK1: POP P,T1 ;RESTORE ATTENTION REGISTER
ATCHK2: SKIPE T1 ;DONE IF ZERO
AOJA Q1,ATCHKN ;INCR UNIT # AND TRY NEXT
NOATTN: MOVE T1,CDBCNI(P1) ;PICK UP THE STATUS
SKIPL T4,CDBXFR(P1) ;TRANSFER IN PROGRESS?
JRST XFR ;YES - ANALYZE
NOATT1: HLLE P4,Q1 ;NO TRANSFER, SET P4=-1 OR 0
NOATT2: MOVEI T1,RH1IE ;CHECK FOR INTERRUPT ENABLE
TION T1,@RC1CS1(P1) ;IF INTERRUPT ENABLE SET LEAVE IT ALONE
WRIOB T1,@RC1CS1(P1) ;OTHERWISE SET IT
RETSKP ;AND LET PHYSIO DO ITS THING
XFR: WRIOB T4,@RC1CS2(P1) ;SET UNIT NUMBER
MOVEI T1,RH1RDY ;CHECK FOR READY
TIOE T1,@RC1CS1(P1)
SKIPN CDBCNI(P1) ;CHECK FOR DATA OPERATION
JRST [ SETZ P4, ;YES, MUST BE FROM ERRPSI (PHYRP4)
JRST NOATT2] ; SO JUST DISMISS THE INTERRUPT
SETZM CDBCNI(P1) ;SET NO DATA OPERATION IN PROGRESS
HRRZ T1,CDBICP(P1) ;FIND THE INITIAL CCW
MOVE T1,2(T1)
RDIO T2,@RC1WC(P1) ;FIND THE WORD COUNT
MOVNS T2 ;MAKE IT +
ANDI T2,177777 ;MASK OFF GOOD BITS
LSH T2,-1 ;MAKE WORDS (PDP10)
LDB T3,CCYCNT ;GET OLD COUNT
DPB T2,CCYCNT ;SET IN NEW CCW
SUB T3,T2 ;FIND COUNT LEFT
ADD T1,T3 ;MAKE ADDRESS
HRRZ T2,CDBICP(P1) ;FIND THE ADDRESS AGAIN
MOVEM T1,2(T2) ;STORE IN LOGOUT AREA
LDB T1,CCYCNT ;FIND THE COUNT AGAIN
SKIPN T1 ;SET WORD COUNT 0 IF TRUE
TLOA T1,(CS1NC0) ;SET BIT
TLO T1,(CS1LWC)
HLLZS T1 ;ZERO RIGHT HALF
MOVEI T3,RH1NEM ;CHECK FOR NXM
TIOE T3,@RC1CS2(P1)
TLO T1,(CS1NXM) ;SET NXM
MOVEI T3,RH1DLT ;CHECK FOR DATA LATE
TIOE T3,@RC1CS2(P1)
TLO T1,(CS1OVR) ;DECLARE OVERRUN
TLO T1,400000 ;INDICATE CHANNEL LOGOUT
MOVEM T1,1(T2) ;SET IN CHANNEL LOGOUT
HRRZ T1,CDBXFR(P1) ;GET UNIT NUMBER OF XFERRING UNIT
ANDI T1,7 ;MASK UNIT NUMBER
CALL SETUDB ;SET UP P3,T2
CALL UDSINT(T2) ;CALL INTERRUPT SERVICE
CALLRET CLRCHL ;ERRORS BELOW, RESET CHAN AND RETURN
CALL CLRCHL ;NO ERRORS
RETSKP
;HERE WHEN AN IORB FINISHED DURING ATTN INT SERVICE, OR A SEEK ERR
ATNIRB: HRRZS P4 ;CLEAR ANY ERROR FLAG
POP P,(P) ;SCRAP STACK
MOVEI T1,RH1IE ;CHECK FOR INTERRUPT ENABLE
TION T1,@RC1CS1(P1) ;IF INTERRUPT ENABLE SET LEAVE IT ALONE
WRIOB T1,@RC1CS1(P1) ;OTHERWISE SET IT
RETSKP ;AND RETURN
;HERE ON AN INTERRUPT FROM A NONEXISTANT UNIT.
ATNXU: PUSH P,Q1 ;SAVE A REGISTER
HRRZ Q2,Q1
WRIOB Q2,@RC1CS2(P1) ;SET UNIT NUMBER
CALL RH2UNA ;SELECT A UNIT
ADD Q2,P1
MOVEM P3,CDBUDB(Q2) ;STORE NEW UDB POINTER
POP P,Q1
MOVEI T2,1 ;CLEAR ATTENTION DIRECTLY
LSH T2,(Q1) ;POSITION BIT
HRLI T2,(DO.AS) ;IN ATTENTION SUMMARY REGISTER
CALL WTREGX ;SPECIAL REGISTER, NEEDS NO UNIT
JRST ATCHK1 ;AND CONTINUE LOOKING
;HERE WHEN DONE IS UP AND THE CHANNEL IS NOT OCCUPIED.
SUBTTL ECC CHANNEL LOGIC
;THE FOLLOWING ROUTINES, AS IN SEVERAL OTHER PLACES, ASSUME THE
;CCW LIST IS EXACTLY ONE WORD LONG.
;HERE TO RETURN THE PHYSICAL ADDRESS OF THE START OF THE LAST BLOCK
;TRANSFERRED.
; CALL ECCADR
;RETURNS+1(ALWAYS):
;T1/ PHYSICAL ADDRESS OF START OF LAST SECTOR TRANSFERRED
ECCADR::HRRZ T1,CDBICP(P1) ;GET STATUS AREA
MOVE T1,2(T1) ;GET CS2, THE UPDATED CCW
LDB T1,CCYADR ;GET ADDRESS PART
SUBI T1,1 ;BACK UP INTO LAST SECTOR TRANSFERRED
TRZ T1,177 ;MASK TO START OF 128WD BLOCK
RET
;HERE TO UPDATE THE CCW LIST TO TRANSFER ANY DATA AFTER THE SECTOR
;WHICH WAS ECC CORRECTED.
; CALL ECCUCL
;RETURNS+1:
; NO MORE DATA TO TRANSFER
;RETURNS+2:
; UPDATED CCW AT CDBCCL(P1)
;T1/ NUMBER OF WORDS TRANSFERED INCLUDING SECTOR ECC CORRECTED
ECCUCL::HRRZ T4,CDBICP(P1) ;GET STATUS AREA
MOVE T1,2(T4) ;GET UPDATED CCW
LDB T3,CCYCNT ;GET WORD COUNT
JUMPE T3,R ;IF 0, ALL DONE.
TLO T1,(CHXFR!CHLST) ;FORCE LAST TRANSFER
MOVEM T1,CDBCCL(P1) ;STORE IN CDB
SETZM CDBCCL+1(P1) ;CLEAR TAIL
CALL PHYCNT ;GET IORB COUNT
SUB T1,T3 ;LESS WORDS TRANSFERRED
RETSKP
TNXEND
END