Trailing-Edge
-
PDP-10 Archives
-
BB-M081Y-SM
-
monitor-sources/ntman.mac
There are 26 other files named ntman.mac in the archive. Click here to see a list.
; Edit= 9007 to NTMAN.MAC on 8-Nov-88 by LOMARTIRE
;Merge Production changes to BUG text
; Edit= 8931 to NTMAN.MAC on 23-Aug-88 by LOMARTIRE
;Improve BUG. documentation
; UPD ID= 8570, RIP:<7.MONITOR>NTMAN.MAC.3, 11-Feb-88 11:43:49 by GSCOTT
;TCO 7.1218 - Update copyright date.
; *** Edit 7318 to NTMAN.MAC by MCCOLLUM on 11-Jun-86, for SPR #21246
; Alter PARAMETER macro to store values in full words and change some network
; management parameters to accept values in millseconds
; UPD ID= 2139, SNARK:<6.1.MONITOR>NTMAN.MAC.58, 5-Jun-85 10:09:30 by MCCOLLUM
;TCO 6.1.1406 - Update copyright notice.
; UPD ID= 2035, SNARK:<6.1.MONITOR>NTMAN.MAC.57, 30-May-85 16:34:05 by GLINDELL
;TCO 6.1.1418 - event block was not deallocated if signal queue was full
; UPD ID= 1904, SNARK:<6.1.MONITOR>NTMAN.MAC.56, 4-May-85 20:28:09 by MCCOLLUM
;TCO 6.1.1238 - Fix more BUG. documentation
; UPD ID= 1859, SNARK:<6.1.MONITOR>NTMAN.MAC.55, 30-Apr-85 16:23:46 by GLINDELL
; TCO 6.1.1351 - SHOW LOOP NODES: NMXS2A took +2 return which was not expected
;
; UPD ID= 1847, SNARK:<6.1.MONITOR>NTMAN.MAC.54, 30-Apr-85 12:22:34 by MCCOLLUM
;TCO 6.1.1238 - Fix BUG. documentation
; UPD ID= 1538, SNARK:<6.1.MONITOR>NTMAN.MAC.53, 19-Feb-85 17:41:29 by PALMIERI
;TCO 6.1.1213 - Add receive block size to the line parameter table
; UPD ID= 1511, SNARK:<6.1.MONITOR>NTMAN.MAC.52, 12-Feb-85 16:55:45 by GLINDELL
; TCO 6.1.1193 - LV8CHK now knows that NMLEVT is in XCDSEC
;
; UPD ID= 1483, SNARK:<6.1.MONITOR>NTMAN.MAC.51, 5-Feb-85 17:25:41 by GLINDELL
; TCO 6.1.1173 - LOOP NODE
; More work at NODCV2 for loop nodes: clear error code in NX block and
; fix for CLEAR/SHOW.
; Also fix BUGCHK NTMSRF - the RET crashes the monitor.
; Fix NMXWNN so LOOP node names are returned correctly
; Remove SANITY routine with NTMSAN BUGHLT in NTMAN
;
; UPD ID= 1425, SNARK:<6.1.MONITOR>NTMAN.MAC.50, 29-Jan-85 14:39:18 by HALPIN
; Change all of ROUTER's Timer parameters from Decimal Milliseconds (DM), to
; Decimal Unsigned (DU).
; Fix bug at NODCV2 which prevented the setting of a Loopback Node and
; Circuit.
;
; UPD ID= 1364, SNARK:<6.1.MONITOR>NTMAN.MAC.49, 19-Jan-85 12:36:22 by HALPIN
; Increase the size of the BSZ filed in the NT BEGSTR, so that we can have
; a buffer size of up to 1023. We need this for the ADJACENT NODE parameter.
;
; UPD ID= 1361, SNARK:<6.1.MONITOR>NTMAN.MAC.48, 17-Jan-85 17:48:37 by GLINDELL
; Disable event class 96, only allow them through if SET
; UPD ID= 1345, SNARK:<6.1.MONITOR>NTMAN.MAC.47, 16-Jan-85 11:29:09 by GLINDELL
; Remove TSTS6 tests
; UPD ID= 1332, SNARK:<6.1.MONITOR>NTMAN.MAC.46, 15-Jan-85 10:18:16 by MCCOLLUM
; Insert a <CRLF> before a ^L so MAKBUG.SNO will work.
; UPD ID= 1301, SNARK:<6.1.MONITOR>NTMAN.MAC.45, 10-Jan-85 16:25:09 by HALPIN
; Fix bugs in error handling. Error returns in SHOPRM from NMXWTY now just
; does a RET instead of jumping to NTEERR, because the error has already been
; stored. Also, put in the same fix after the call to SHOPRM from SELITM.
; Increase the size of the buffer used to get a circuit's adjacent nodes, from
; 64 to 1024.
;
; UPD ID= 1177, SNARK:<6.1.MONITOR>NTMAN.MAC.44, 11-Dec-84 11:38:48 by HALPIN
; TC0 6.1.1078 Fix NMXRNM to store Decimal Millsecond values into NFBUF,+NFWBLK
; instead of NXVAL,+NMXVAR.
;
; UPD ID= 1174, SNARK:<6.1.MONITOR>NTMAN.MAC.43, 10-Dec-84 18:24:26 by GLINDELL
;CHKBPT is in XCDSEC now
; UPD ID= 1160, SNARK:<6.1.MONITOR>NTMAN.MAC.42, 5-Dec-84 17:31:22 by GLINDELL
;Remove unnecessary intra-section transfers
; UPD ID= 1146, SNARK:<6.1.MONITOR>NTMAN.MAC.41, 3-Dec-84 17:40:20 by HALPIN
; Make the NODE STATE Parameter a 'HOME AREA Only' Parameter in the NODE
; Parameter tables by adding the NTA.H flag to the Applicability Field.
;
; UPD ID= 1076, SNARK:<6.1.MONITOR>NTMAN.MAC.40, 14-Nov-84 13:36:34 by GLINDELL
;Fix IFIW's
; UPD ID= 1015, SNARK:<6.1.MONITOR>NTMAN.MAC.39, 9-Nov-84 11:50:11 by GLINDELL
;NMLEVT doesnt need to test NMLPSI - LV8CHK does that...
; UPD ID= 1008, SNARK:<6.1.MONITOR>NTMAN.MAC.38, 8-Nov-84 10:03:33 by GLINDELL
;NMLEVT wasnt testing NMLPSI! It used to, and it should.
; UPD ID= 949, SNARK:<6.1.MONITOR>NTMAN.MAC.37, 4-Nov-84 18:12:18 by GLINDELL
;Hooks for NSP 'database reused' event + remove NMXNDQ definition
; UPD ID= 892, SNARK:<6.1.MONITOR>NTMAN.MAC.36, 17-Oct-84 15:22:26 by HALPIN
;Move most of the code to Extended Section.
;Remove Originating Queue Limit from Circuit Parameter Table
;Insert Maximum Routers in Circuit Parameter Table
;Clear the NXNIL bit in counter routines after the first call to PRSCBK. This
;will allow one layer to return its counters when the first layer returned
;'No Data'. Fixed duplicate calls to NTEERR in PRSCOU and SHOQUP routines.
;
; UPD ID= 879, SNARK:<6.1.MONITOR>NTMAN.MAC.35, 12-Oct-84 15:20:25 by HALPIN
;Move the Priv chack back to where it was. It was blowing away T1. Don't
;check priv's until T1 (arg block address) is saved away.
;
; UPD ID= 874, SNARK:<6.1.MONITOR>NTMAN.MAC.34, 11-Oct-84 17:20:12 by GLINDELL
;Forgot to declare D36IFG global
;
; UPD ID= 873, SNARK:<6.1.MONITOR>NTMAN.MAC.33, 11-Oct-84 17:13:29 by GLINDELL
;Check to see if DECnet is initialized in .NTMAN jsys.
;Also, move the priv check to before the initialization of the trvar arg block,
; saves some time
;
; UPD ID= 863, SNARK:<6.1.MONITOR>NTMAN.MAC.32, 10-Oct-84 17:50:01 by HALPIN
;Removed the Home Area Node Buffer (NMXNDB) from RESVR. Got rid of routine
;SETNDB and all references to it. Call DNGWZP to allocate a zeroed buffer
;for returning Home Area Nodes. Fix up error returns to deallocate new
;buffer correctly.
;
; UPD ID= 818, SLICE:<6.1.MONITOR>NTMAN.MAC.28, 24-Sep-84 16:32:03 by HALPIN
;Add Circuit State Selector to .NTSHO Function.
;
; UPD ID= 814, SLICE:<6.1.MONITOR>NTMAN.MAC.27, 24-Sep-84 09:15:49 by HALPIN
;Fix LINCVT to call DNADLL Check Entity Function.
;Fix NMXWNM to put values back into NFBUF after converting from milliseconds
;to seconds.
;Realign the Circuit Parameter Table so that Qualified Parameters are always
;put into the NICE message last.
;SELITM checks for Node parameters which are only applicable in the Home
;Area.
;
; UPD ID= 793, SNARK:<6.1.MONITOR>NTMAN.MAC.26, 10-Sep-84 15:47:51 by HALPIN
;Fix error returns in NMXLCK to handle RNMXND (No Data) returns from
;ROUTER. Fixes NTMNEC Bugchks when a SHOW KNOWN CIRCUITS command is
;issued before DECnet is initialized, i.e. no circuit blocks have been
;created by ROUTER.
;Don't call ROUTER for Remote Node counters, EXECUTOR Counters only.
;
; UPD ID= 769, SNARK:<6.1.MONITOR>NTMAN.MAC.25, 31-Aug-84 10:54:19 by HALPIN
;Rewrite for TOPS-20 V6.1.
;New interface to DECnet Layers
;Removed old edit histories, because most of the routines described
;no longer exist.
; COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1984, 1988.
; ALL RIGHTS RESERVED.
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
; ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
; INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
; COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
; OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
; TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
; AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
; CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
; SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
;TITLE NTMAN - Network Management Interface for DECnet-36
SUBTTL Jim Halpin, Gunnar Lindell, & Tarl Neustaedter
SEARCH D36PAR,MACSYM
SALL
IFN FTOPS20,<
SEARCH PROLOG
TTITLE NTMAN,,< - Network Management interface for DECnet-36>
>
IFN FTOPS10,<
SEARCH F,S
TITLE NTMAN - Network Management interface for DECnet-36
.CPYRT<
COPYRIGHT (C) 1984,1988 BY DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
>
$RELOC
>;END IFN FTOPS10
D36SYM ;SET UP D36 SPECIFIC PARAMETERS
;Declare all global entry points to NTMAN
ENTRY NTMAN ;TO FORCE LINK TO LOAD WITH REST OF DECNET
INTERN .NTMAN ; = NTMAN. JSYS/UUO entry point
INTERN NMXEVT ;Event logger
INTERN PRSCOU ;Hook for NSP event "Database reused"
IFN FTOPS20 <
INTERN EVRKIL ;Kill the event reader
INTERN NMLEVT ;Check if event reader should get PSI
>
Subttl Table of Contents
; Table of Contents for NTMAN
;
; Section Page
;
;
; 1. Data structures
; 1.1 Value definitions . . . . . . . . . . . . . . 5
; 1.2 BEGSTR NT . . . . . . . . . . . . . . . . . . 6
; 1.3 NMX dispatch table . . . . . . . . . . . . . . 7
; 1.4 Parameter and counter definitions . . . . . . 8
; 1.5 Event and logging definitions . . . . . . . . 13
; 2. NTMAN
; 2.1 Entry . . . . . . . . . . . . . . . . . . . . 14
; 2.2 Get pertinent data from user's data block . . 15
; 2.3 Dispatch to functions . . . . . . . . . . . . 17
; 3. Functions
; 3.1 .NTMAP - Map node name/number . . . . . . . . 18
; 3.2 .NTREX - Return local node number . . . . . . 19
; 3.3 .NTSET,.NTCLR - Parse and process a parameter 20
; 4. Counter Functions . . . . . . . . . . . . . . . . . . 21
; 5. PRSNDC - Process Node counters . . . . . . . . . . . . 22
; 6. PRSCKC - Process Circuit counters . . . . . . . . . . 23
; 7. PRSLNC - Process Line Counters . . . . . . . . . . . . 24
; 8. Parse Counter block and build NICE response . . . . . 25
; 9. Functions
; 9.1 .NTSHO
; 9.1.1 Select parameters to return . . . . . . 26
; 9.1.2 Get the Qualifier values, for a Qualifie 27
; 9.1.3 Return parameters to user . . . . . . . 28
; 9.2 .NTRET
; 9.2.1 List node names . . . . . . . . . . . . 30
; 9.2.2 List circuit and line names . . . . . . 34
; 10. Entities
; 10.1 Convert entity names to entity ids . . . . . . 35
; 10.2 Circuit ID to name conversion . . . . . . . . 38
; 10.3 Convert name to Circuit-ID. . . . . . . . . . 39
; 11. Layers
; 11.1 Main interface to layer levels . . . . . . . . 40
; 12. Events
; 12.1 Interface layer / NMX (NMXEVT) . . . . . . . . 41
; 12.2 NMXEVT
; 12.2.1 EVGEC (Get EC block) . . . . . . . . . . 42
; 12.2.2 EVREC (Release Ec block) . . . . . . . . 43
; 12.2.3 EVFIL (Filter an event) . . . . . . . . 44
; 12.2.4 EVLOG (Log an event) . . . . . . . . . . 45
; 12.2.5 EVSIG (Log a signal) . . . . . . . . . . 49
; 12.3 .NTTEV function (Test event logger) . . . . . 50
; 12.4 .NTSLM function (Set global logging mask) . . 51
; 12.5 .NTPSI function (Set event PSI channel) . . . 52
; 12.6 .NTEVQ function (Pass queued event to user) . 53
Subttl Table of Contents (page 2)
; Table of Contents for NTMAN
;
; Section Page
;
;
; 13. User strings
; 13.1 Write parameter with nice . . . . . . . . . . 55
; 13.2 Write coded data . . . . . . . . . . . . . . . 56
; 13.3 Write ascii image data . . . . . . . . . . . . 57
; 13.4 Write hexidecimal image data . . . . . . . . . 59
; 13.5 Write numeric data . . . . . . . . . . . . . . 60
; 14. Write out NSP or Routing Version numbers . . . . . . . 61
; 15. Write out Node Entity Id . . . . . . . . . . . . . . . 62
; 16. User strings
; 16.1 Read a number from user . . . . . . . . . . . 63
; 16.2 Read and write milliseconds . . . . . . . . . 68
; 16.3 Copy STRINGID from user to exec . . . . . . . 69
; 16.4 Copy STRINGID from exec to user . . . . . . . 70
; 16.5 Get and put user byte routines. . . . . . . . 71
; 16.6 Get and put single bytes into data strings. . 72
; 17. Miscellaneous
; 17.1 Error returns . . . . . . . . . . . . . . . . 73
; 17.2 Name/number conversion. . . . . . . . . . . . 74
SUBTTL Data structures -- Value definitions
;AC definitions
TM=FREE0 ;A WORK AC. PRESERVED
NT=FREE2 ;POINTS TO THE TABLE FORMAT BLOCK
;Network management non-error code
XP NESUC%,1
;Function codes
.NTSLM==-4 ;Set global logging mask (TOPS-20 only)
.NTPSI==-3 ;SET PSI MASK (TOPS20 ONLY)
.NTMAP==-2 ;Map Node name/Node number
.NTREX==-1 ;Return local node ID
.NTSET==0 ;SET PARAMETER
.NTCLR==1 ;CLEAR PARAMETER
.NTZRO==2 ;ZERO COUNTERS
.NTSHO==3 ;SHOW SELECTED ITEMS
.NTSZC==4 ;SHOW AND ZERO COUNTERS
.NTRET==5 ;RETURN LIST OF ITEMS
.NTEVQ==6 ;REMOVE AN ITEM FROM THE EVENT QUEUE
.NTSUM==0 ;SUMMARY ;(FOR .NTSHO)
.NTSTA==1 ;STATUS
.NTCHA==2 ;CHARACTERISTICS
.NTCOU==3 ;COUNTERS
;Skip 4 to avoid possible confusion with EVENTS
.NTCST==5 ;CIRCUIT STATE
;Offsets to important locations in block
.NTQUA==5 ;BYTE POINTER TO FUNCTION QUALIFER
.NTBPT==6 ;BYTE POINTER TO DATA STRING
.NTBYT==7 ;BYTE COUNT FOR DATA STRING
.NTERR==10 ;RETURN CODE, OR ERROR CODE
;Some Maximum Length Constants
MXNNLN==6 ;Maximum Node Name Length
MXHILN==6 ;Maximum Hexidecimal Image string Length
;Constants for Memory allocations
FHIBLK==4 ;Hexidecimal Image buffer
COUBLK==^D100 ;Counter Block, should have plenty of
;extra room, just incase some wierd layer
;invents some newer counters.
CIRBLK==^D100 ;For RETURN LIST OF ENTITY IDS function
LPNBLK==^D32 ;For return list of LOOP Nodes
NDBLEN==^D1024 ;For return of Home Area Nodes
;Some constants for NICE Data Type Fields
NT.CNM==200 ;Coded Non-Multiple (OR'ed into byte length)
NT.CM1==301 ;Coded Multiple, 1 fields long
NT.CM2==302 ;Coded multiple, 2 fields long
NT.CM3==303 ;Coded multiple, 3 fields long
NT.DU1==1 ;Decimal, Unsigned, 1 byte long
NT.DU2==2 ;Decimal, Unsigned, 2 bytes long
NT.AI==100 ;ASCII Image field
NT.HI==40 ;HEXIDECIMAL Image field
;Needed Parameter Numbers
NODSTA==0 ;Node State Parameter number value
;MACRO TO GIVE AN ERROR RETURN. THIS IS USED SIMPLY TO HIGHLIGHT THE FACT
;OF AN ERROR RETURN, AND DOES NOT PRECLUDE OTHER WAYS OF REACHING THE ROUTINES
;WHICH SET AN ERROR CODE. A JSP IS USED TO FACILITATE DEBUGGING.
DEFINE XERRRET(ROUTINE),<XJSP (CX,XCDSEC,ROUTINE)> ; Jump to error routine
; in Extended Section
DEFINE ERRRET(ROUTINE),<JSP CX,ROUTINE>
XSWAPCD ;Most of NTMAN is swappable ($HIGH on TOPS-10)
EXTERN DNGWDZ,DNGWZP,DNGWDS,DNFWDS,NMXTIM,NMXPRV ;D36COM
EXTERN IBBLK,D36IFG
EXTERN TIMBAS,DNGTIM ;D36COM
EXTERN RTRMXN
EXTERN RTN,RSKP,CHKBPT,KONNAM
IFN FTOPS10,<EXTERN GETWRD,GETWR1,PSIDVT>
;NMX Standard Interface Routines
EXTERN SCLNMX ;Session Control Layer
EXTERN ECLNMX ;End Communication Layer
EXTERN RTRNMX ;Routing layer
EXTERN DNDNMX ;Data Link Layer
SUBTTL Data structures -- BEGSTR NT
;Table to find and validate a call parameter or counter.
BEGSTR NT
FIELD TYP,4 ;DATA TYPE (ASCII, HEX,...)
XP NT.FC,1 ;CODED FORMAT
XP NT.FCM,2 ;CODED MULTIPLE (THIS MEANS SPECIAL CASING)
XP NT.FAI,3 ;ASCII IMAGE (8-BIT)
XP NT.FDU,4 ;DECIMAL, UNSIGNED. CANNOT BE ZERO.
XP NT.FDS,5 ;DECIMAL, SIGNED
XP NT.FH,6 ;HEX INTEGER.
XP NT.FHI,7 ;HEX, IMAGE.
XP NT.FOC,^D8 ;OCTAL.
;ABOVE ARE DATA TYPES AS DESCRIBED IN NM SPEC
; V3.0 PAGE 162.
;BELOW ARE DATA TYPES USED INTERNALLY ONLY TO
; THIS MODULE.
; THESE SHOULD BE SHIFTED DOWN IF NM SPECIFIES
; MORE DATA TYPES
XP NT.FDM,^D9 ;INTERNAL DATA TYPE ONLY. DECIMAL,MILLISECONDS.
; THIS GETS OUTPUT AS NT.FDU (SEE NMXWNM)
XP NT.FVN,^D10 ;INTERNAL DATA TYPE ONLY. VERSION NUMBER.
; THIS GETS OUTPUT AS NT.FCM (DU-1,DU-1,DU-1)
XP NT.FNE,^D11 ;INTERNAL DATA TYPE ONLY. NODE ENTITY ID.
; THIS GETS OUTPUT AS NT.FCM (DU-2,AI-6)
XP NT.FNN,^D12 ;INTERNAL DATA TYPE ONLY. ASCII NODE NAME
; THIS GET OUTPUT AS NT.FAI (AI-6)
XP NT.FCN,^D13 ;INTERNAL DATA TYPE ONLY. ASCII CIRCUIT NAME
; THIS GET OUTPUT AS NT.FAI (AI-16)
FIELD LEN,5 ;LENGTH
FIELD ROU,6 ;INDEX TO ROUTINE TO CALL
FIELD DEV,6 ;DEVICE APPLICABILITY
BIT D.R ;DMR-11
BIT D.N ;Ethernet (KLNI)
BIT D.C ;Computer Interconnect (KLPI)
BIT D.P ;DDP
BIT D.K ;KDP
BIT D.D ;DTE-20 (UGH)
FIELD QUA,15 ;Qualifier Parameter Number
NXTWRD ;FORCE NEXT WORD ALIGNMENT.
FIELD APL,4 ;APPLICABILITY RESTRICTIONS
BIT A.E ;EXECUTOR
BIT A.L ;LOOP NODES.
BIT A.R ;REMOTE NODES.
BIT A.H ;HOME AREA NODES ONLY.
FIELD INF,6 ;INFORMATION TYPE
BIT I.C ;CHARACTERISTICS (LISTED IN SPEC AS 'C')
BIT I.S ;STATUS (LISTED IN SPEC AS 'S')
BIT I.% ;SUMMARY (LISTED IN SPEC AS '*')
BIT I.K ;Circuit State.
BIT I.Q ;This parameter is Qualified
BIT I.N ;NONE. NOOP BIT, NOT NECESSARY
FIELD SET,2 ;SETTABILITY RESTRICTIONS
XP NTS.,0 ;0 MEANS READ AND WRITE
XP NTS.R,1 ;READ ONLY PARAMETER.
XP NTS.W,2 ;WRITE ONLY PARAMETER.
FIELD BUF,1 ;Buffer Field
XP NTB.,0 ;Parameter Value fits into a Word
XP NTB.B,1 ;Parameter value too big, go allocate a buffer
FIELD BSZ,10 ;Buffer size needed (if needed)
FIELD SEQ,13 ;SEQUENCE OR TYPE OF FIELD
ENDSTR
IFN <NT.LST-2>,<PRINTX ?LENGTH OF BEGSTR NT IS WRONG> ;TABLE LOGIC KNOWS LENGTH
;Bit positions for fields - will need for building tables.
TYP$==POS(NTTYP)
SEQ$==POS(NTSEQ)
SET$==POS(NTSET)
LEN$==POS(NTLEN)
ROU$==POS(NTROU)
QUA$==POS(NTQUA)
BSZ$==POS(NTBSZ)
BUF$==POS(NTBUF)
SUBTTL Data structures -- NMX dispatch table
NMXDSP:
PHASE 0 ;Make labels be relative offsets.
NMXMIN:! ;Lowest offset for NMXDSP
SCL:! XCDSEC,,SCLNMX ;Session Control Layer
ECL:! XCDSEC,,ECLNMX ;End Communication Layer
RTL:! XCDSEC,,RTRNMX ;Routing Layer
DLL:! XCDSEC,,DNDNMX ;Data Link Layer
NMXMAX:! ;Maximum value plus one
IFGE <NMXMAX-<1_WID(NTROU)>>,<PRINTX ?Too many Layer servers for width of NTROU>
DEPHASE
SUBTTL Data structures -- Parameter and counter definitions
DEFINE NODE$P,<
N(0 ,C,1 ,S%,ERH ,R,,RTL) ;State.
N(10 ,HI,6 ,S,E ,R,,DLL,,B,4) ;Physical Address
N(500 ,NN,6 ,N,R ,W,,SCL) ;Name of node (set only)
N(501 ,CN,16 ,C%,L ,,,SCL) ;Circuit
N(502 ,DU,2 ,N,E ,W,,SCL) ;Address (set only)
N(510 ,DM,2 ,C,E ,,,SCL) ;Incoming timer
N(511 ,DM,2 ,C,E ,,,SCL) ;Outgoing timer
N(600 ,DU,2 ,S%,ER ,R,,ECL) ;Active links.
N(601 ,DM,2 ,S%,R ,R,,ECL) ;Delay
N(700 ,VN,3 ,C,E ,R,,ECL) ;NSP version
N(710 ,DU,2 ,C,E ,,,ECL) ;Maximum Links
N(720 ,DU,1 ,C,E ,,,ECL) ;Delay factor.
N(721 ,DU,1 ,C,E ,,,ECL) ;Delay weight.
N(722 ,DU,2 ,C,E ,,,ECL) ;Inactivity timer.
N(723 ,DU,2 ,C,E ,,,ECL) ;Retransmit factor.
N(810 ,C,1 ,S,RH ,R,,RTL) ;Type
N(820 ,DU,2 ,S,RH ,R,,RTL) ;Cost
N(821 ,DU,1 ,S,RH ,R,,RTL) ;Hops
N(822 ,CN,16 ,S%,R ,R,,RTL) ;circuit
N(830 ,NE,2 ,S%,R ,R,,RTL) ;Next Node
N(900 ,VN,3 ,C,E ,R,,RTL) ;Routing version
N(901 ,C,1 ,C,E ,R,,RTL) ;Type
N(910 ,DM,2 ,C,E ,,,RTL) ;[7318]Routing timer.
N(912 ,DM,2 ,C,E ,,,RTL) ;[7318]Broadcast Routing Timer
N(920 ,DU,2 ,C,E ,,,RTL) ;Maximum address.
N(921 ,DU,2 ,C,E ,,,RTL) ;Maximum Circuits.
N(922 ,DU,2 ,C,E ,,,RTL) ;Maximum cost.
N(923 ,DU,1 ,C,E ,,,RTL) ;Maximum hops.
N(924 ,DU,1 ,C,E ,,,RTL) ;Maximum visits.
N(926 ,DU,2 ,C,E ,,,RTL) ;Maximum Broadcast Non-Routers
N(927 ,DU,2 ,C,E ,,,RTL) ;Maximum Broadcast Routers
N(930 ,DU,2 ,C,E ,,,RTL) ;Maximum Buffers
N(931 ,DU,2 ,C,E ,R,,RTL) ;Buffer size.
N(932 ,DU,2 ,C,E ,,,RTL) ;Segment Buffer Size
>
DEFINE LINE$P,<
N(0 ,C,1 ,S%, ,,,DLL) ;State
N(1105 ,DU,2 ,C, ,R,,DLL) ;Receive Buffers
N(1110 ,C,1 ,C, ,R,,DLL) ;Controller
N(1112 ,C,1 ,C, ,R,,DLL) ;Protocol
N(1160 ,HI,6 ,C, ,R,N,DLL,,B,4) ;Hardware Address
N(2500 ,DU,2 ,C, ,R,,DLL) ;Receive block size
>
DEFINE CIRC$P,<
N(0 ,C,1 ,K, ,,,RTL) ;State.
N(400 ,NN,6 ,S%, ,R,,SCL) ;Loopback Name
N(800 ,NE,2 ,%, ,R,,RTL,,B,1023) ;Adjacent node
N(801 ,NE,2 ,S, ,R,N,RTL) ;Designated Router
N(810 ,DU,2 ,SQ, ,R,,RTL,800) ;Block size
N(900 ,DU,1 ,C, ,,,RTL) ;Cost.
N(901 ,DU,1 ,C, ,,N,RTL) ;Maximum Routers
N(902 ,DU,1 ,C, ,,N,RTL) ;Router Priority
N(906 ,DM,2 ,C, ,,,RTL) ;[7318]Hello timer
N(1112 ,C,1 ,C, ,,,DLL) ;Circuit Type
N(907 ,DU,2 ,CQ, ,,,RTL,800) ;Listen timer
>
DEFINE XPAND(.RES,.PFX,.CHA),<
.RES=0
IFB <.CHA>,<.RES=-1>
IRPC .CHA,<IFNB <.CHA>,<.RES=.RES!.PFX'.CHA>>
>
DEFINE .M(MASK),<1_WID(MASK)>
;Macro to create primary table entry
DEFINE NTENT(.APL,.INF,.SET,.BFF,.SIZ,.SEQ),<
IFB <.SIZ>,<BSZ==0>
IFNB <.SIZ>,<BSZ==^D'.SIZ>
IFGE <^D'.SEQ-.M(NTSEQ)>,<PRINTX ?Parameter .SEQ will not fit in NTSEQ>
XPAND(APL,NTA.,.APL)
XPAND(INF,NTI.,.INF)
<APL&NTAPL>!
<INF&NTINF>!
<<NTS.'.SET>B<SET$>&NTSET>!
<<NTB.'.BFF>B<BUF$>&NTBUF>!
<<BSZ>B<BSZ$>&NTBSZ>!
<<^D'.SEQ>B<SEQ$>&NTSEQ>
>
;Define rightmost positions of fields, for ddt
NTN==:<1B<POS(NTAPL)>!1B<POS(NTINF)>!1B<POS(NTSET)>!1B<POS(NTBUF)>!1B<POS(NTBSZ)>!1B<POS(NTSEQ)>>
NSS==:<1B<POS(NTTYP)>!1B<POS(NTLEN)>!1B<POS(NTROU)>!1B<POS(NTDEV)>!1B<POS(NTQUA)>>
;Example - NTN$3M NODEP+3$10r$o/ 100.,10.,4.,0.,0.
;displays fields NTAPL, NTINF, NTSET, NTSEQ .
;Macro to define secondary entry (Format)
DEFINE STENT(.TYP,.LEN,.ROU,.DEV,.QUA),<
XPAND(DEV,NTD.,.DEV)
IFB <.QUA>,<QUA==0>
IFNB <.QUA>,<QUA==^D'.QUA>
IFGE <.ROU-NMXMAX>,<PRINTX ?Routine .ROU out of range>
IFGE <^D'.LEN-.M(NTLEN)>,<PRINTX ?Parameter .LEN will not fit in NTLEN>
<<NT.F'.TYP>B<TYP$>&NTTYP>!
<<^D'.LEN>B<LEN$>&NTLEN>!
<<.ROU>B<ROU$>&NTROU>!
<DEV&NTDEV>!
<<QUA>B<QUA$>&NTQUA>
>
;Define all the REAL stuff now.
DEFINE N(.SEQ,.TYP,.LEN,.INF,.APP,.SET,.DEV,.ROU,.QUA,.BFF,.SIZ),<
STENT(.TYP,.LEN,.ROU,.DEV,.QUA)
NTENT(.APP,.INF,.SET,.BFF,.SIZ,.SEQ)
>
DEFINE MAKTAB(.LAB,.STF),<
XLIST
.LAB: .STF
.LAB'L==:.-.LAB
LIST
>
MAKTAB(NODEP,NODE$P)
MAKTAB(LINEP,LINE$P)
MAKTAB(CIRCP,CIRC$P)
;Pointers to parameter data base.
PRMP: XWD <-NODEPL/NT.LST>,NODEP ;NODE PARAMETERS
XWD <-LINEPL/NT.LST>,LINEP ;LINE PARAMETERS
Z ;LOGGING PARAMETERS
XWD <-CIRCPL/NT.LST>,CIRCP ;CIRCUIT PARAMETERS
Z ;MODULE - WE DON'T HAVE ANY
Z ;EVENTS - CAN'T SET ANYTHING.
SUBTTL Data structures -- Event and logging definitions
RESVR
;Event queue variables
NMXEVQ: BLOCK QH.LEN ;Event queue header
NMXELO: BLOCK 1 ;Event queue contains a lost event
;Signal queue variables
NMXSIQ: BLOCK QH.LEN ;Signal queue header
;Macros to define global filter table
DEFINE $SFIL <> ;"Start filter table"
DEFINE $FIL(A,B) < ;"Filter table entry"
XWD A,B
REPEAT <B+1-A>,<XWD 37777,-1>
>
DEFINE $NOFIL(A,B) < ;;"Off filter table entry"
XWD A,B
REPEAT <B+1-A>,<EXP 0>
>
DEFINE $EFIL <EXP -1> ;"End filter table"
;Now generate filter table
RESDT ;Initialized data
NMXFIL: $SFIL
$FIL(2,6) ;Event classes 2 through 6 known by monitor
$NOFIL(^D96,^D96) ;LCG specific events - turned off
IFN FTDEBUG <
$FIL(^D480,^D480) ;Accept event class 480 while debugging
>
$EFIL
;Note: add more $FIL entries to declare more monitor event classes.
;The table will expand to
;
; NMXFIL: 2,,6
; REPEAT 5,< 37777,,777777> ;All 32 event types within
; -1 ; a class in BLISS bit meaning
; -1 is an end flag
SWAPCD
SUBTTL NTMAN -- Entry
;Called from DISP2A in UUOCON
;Call
; M[T6]/ UUO itself (Used for storing values in the AC later)
; T1/ Contents of the AC at UUO time
; P/ Pointer to a stack in the current section
;Return
; RET error, .NTERR and AC contain error code
; SKPRET success. AC unchanged
.NTMAN:
NTMAN:
IFN FTOPS20,<
MCENT ;ENTER MONITOR CONTEXT
UMOVE T1,1 ;GET ADDRESS OF BLOCK
>
SEC1 ;DO THE UUO IN SECTION 1
SKIPL D36IFG ;Is DECNET initialized?
ITERR (NTMX3) ; -no, return error code
;** Note **
; If you change this TRVAR, you need to change the TRVAR in routine GENE32
; in LLINKS as well.
TRVAR <<NMXVAR,NX.LST>,<NFWBLK,NF.LST>> ;SET UP TRVAR
;** End note **
SETZM NMXVAR ;CLEAN FIRST WORD OF BLOCK
HRRI T2,1+NMXVAR ;GET POINTER TO SECOND WORD IN BLOCK
HRLI T2,NMXVAR ;POINT AT START OF BLOCK
BLT T2,NX.LST-1+NMXVAR ;CLEAN UNTIL END OF BLOCK
STOR T1,NXADR,+NMXVAR ;SAVE ADDRESS OF ARGUMENT BLOCK
SETZM NFWBLK ;CLEAN FIRST WORD OF BLOCK
HRRI T2,1+NFWBLK ;GET POINTER TO SECOND WORD IN BLOCK
HRLI T2,NFWBLK ;POINT AT START OF BLOCK
BLT T2,NF.LST-1+NFWBLK ;CLEAN UNTIL END OF BLOCK
IFN FTOPS10,STOR T6,NXUUO,+NMXVAR ;** TOPS10 CALLS US WITH M/ UUO EXECUTED
XCALL (XCDSEC,NMXPRV) ;MAKE SURE WE ARE PRIVED.
IFN FTOPS10,< ;Tops-10 wants error in NTMAN argument block
ERRRET NTEPRV ;NOPE, GIVE THE NO PRIVS RETURN
>
IFN FTOPS20,< ;While Tops-20 generates CAPX1 error
ITERR (CAPX1)
>
CALL GETBLK ;GET STUFF FROM USER PARAMETER BLOCK
ERRRET NTERXI ;DIDN'T MAKE IT. SOMETHING WRONG.
XCALL (XCDSEC,NMXDIS) ;DISPATCH TO ROUTINES (IN NTMAN)
ERRRET NTERXI ;ERROR EXIT OF SOME KIND. CHECK.
IFN FTDEBUG <
TMNE NXERR,+NMXVAR ;MAKE SURE NO ERROR CODE HAS MADE IT'S WAY HERE
BUG.(CHK,NTMSRF,NTMAN,SOFT,<Skipness of return fouled up>,,<
Cause: There is an error code stored in field NXERR after a return from
NTMAN with a skip return.
Action: If this BUG persists, make it dumpable and submit an SPR with the
dump and a copy of MONITR.EXE. If possible, include any known
method for reproducing the problem and/or the state of the system
at the time the BUG was observed. Find the caller and put a non-skip
return in the routine giving the error call.
>,RTN)
>
LOAD T2,NXADR,+NMXVAR ;GET ADDRESS OF USER'S ARGUMENT BLOCK
MOVX T1,NESUC% ;ERROR CODE INDICATING SUCCESS.
UMOVEM T1,.NTERR(T2) ;PUT IN ERROR CODE SPOT OF ARGUMENT BLOCK
UMOVE T3,.NTBYT(T2) ;GET ORIGINAL NUMBER OF BYTES HE ALLOWED US
LOAD T1,NXDAT,+BP.BYT+NMXVAR ;GET NUMBER OF BYTES LEFT IN STRING
SUB T3,T1 ;GET NUMBER OF BYTES WE ACTUALLY DEPOSITED
TMNE NXWUS,+NMXVAR ;DID WE WRITE TO THE USER'S STRING?
UMOVEM T3,.NTBYT(T2) ;TELL USER HOW MANY BYTES WE GAVE HIM
IFN FTOPS20,MRETNG ;MAKE THE UUO DO A GOOD RETURN
IFN FTOPS10,RETSKP
NTERXI:
OPSTR <SKIPL T1,>,NXERR,+NMXVAR
BUG.(CHK,NTMNEC,NTMAN,SOFT,<No error code with error return>,,<
Cause: A routine has returned non-skip, but has not given
an error code by calling NTExxx. A return to the top level found
field NXERR zero.
Action: If this BUG persists, make it dumpable and submit an SPR with the
dump and a copy of MONITR.EXE. If possible, include any known
method for reproducing the problem and/or the state of the system
at the time the BUG was observed. Analyze the dump and
determine which routine is failing, and make the error return
give an error code.
>)
IFN FTOPS10,<
LOAD T6,NXUUO,+NMXVAR ;GET UUO BACK - NEED FOR STOTAC
CALL STOTAC## ;PUT ERROR CODE IN AC
LOAD T1,NXERR,+NMXVAR ;GET ERROR CODE
CAXN T1,NEADC% ;WAS THIS AN ADDRESS CHECK?
RET ;YES, DON'T DO FURTHER DAMAGE.
> ;END IFN FTOPS10
LOAD T2,NXADR,+NMXVAR ;GET ADDRESS OF USER BLOCK
UMOVEM T1,.NTERR(T2) ;NOPE, SAFE TO GIVE HIM ERROR CODE
SETZ T1, ;0 BYTES
UMOVEM T1,.NTBYT(T2) ;TELL NML THAT WE DIDN'T GIVE HIM ANYTHING.
IFN FTOPS20,ITERR (NTMX1) ;GENERIC NETWORK MANAGEMENT ERROR
IFN FTOPS10,RET ;RETURN NON-SKIP, INDICATING UUO FAILED
SUBTTL NTMAN -- Get pertinent data from user's data block
;Called from NMXDIS
;GETBLK - Copy pertinent fields from user's argument block to NX block
;;Call
; NX/ Pointer to NX block
;Returns
; Non skip on failure - Address check
; Skip return on success
GETBLK:
SAVEAC P1 ;SO WE CAN HOLD SOME STUFF
LOAD T6,NXADR,+NMXVAR ;GETWRD UNDERSTANDS T6 AS ADDRESS.
CALL GETWRD ;GET FIRST WORD OF BLOCK
IFNSK.
XERRRET NTEADC ;NO GO. CAN'T HAPPEN
ENDIF.
CAIGE T1,.NTERR ;MAKE SURE BLOCK INCLUDES .NTERR
IFNSK.
XERRRET NTEADC ;NOPE, ADDRESS CHECK.
ENDIF.
CALL GETWR1 ;GET NEXT WORD IN BLOCK
IFNSK.
XERRRET NTEADC ;NOPE, ADDRESS CHECK.
ENDIF.
CAXL T1,.NTNOD ;RANGE CHECK THE ENTITY TYPE
CAXLE T1,.NTARE
IFNSK.
XERRRET NTEINI ;NOPE, ADDRESS CHECK.
ENDIF.
STOR T1,NXENT,+NMXVAR ;SAVE AS ENTITY TYPE
CALL GETWR1 ;GET BYTE POINTER TO ENTITY ID
IFNSK.
XERRRET NTEADC ;NOPE, ADDRESS CHECK.
ENDIF.
MOVE P1,T6 ;SAVE POINTER TO ARG BLOCK FOR A WHILE
MOVX T2,^D16 ;THIS COULD BE AS MUCH AS 16 BYTES
XCALL (XCDSEC,CHKBPT) ;ASK IF THIS IS A GOOD BYTE POINTER
IFNSK.
XERRRET NTEADC ;NOPE, ADDRESS CHECK.
ENDIF.
MOVE T6,P1 ;GET BACK POINTER TO OUR ARGUMENT LIST
STOR T1,NXEID,+BP.BPT+NMXVAR ;SAVE RESOLVED BYTE POINTER
MOVX T1,^D16 ;MAXIMUM LENGTH FOR AN ENTITY ID
STOR T1,NXEID,+BP.BYT+NMXVAR ;SAVE
CALL GETWR1 ;GET FUNCTION TO BE PERFORMED
IFNSK.
XERRRET NTEADC ;NOPE, ADDRESS CHECK.
ENDIF.
IFN FTDEBUG <
CAXL T1,.NTTEV
>
IFE FTDEBUG <
CAXL T1,.NTSLM ;RANGE CHECK FUNCTION
>
CAXLE T1,.NTEVQ
IFNSK.
XERRRET NTEUFO ;BAD FUNCTION
ENDIF.
STOR T1,NXFNC,+NMXVAR ;SAVE AWAY.
CALL GETWR1 ;GET SELECTION CRITERIA
IFNSK.
XERRRET NTEADC ;NOPE, ADDRESS CHECK.
ENDIF.
STOR T1,NXSEL,+NMXVAR ;STASH AWAY
CALL GETWR1 ;GET FUNCTION QUALIFIER
IFNSK.
XERRRET NTEADC ;NOPE, ADDRESS CHECK.
ENDIF.
;I DON'T KNOW WHAT TO DO WITH THIS. TOSS.
CALL GETWR1 ;GET BYTE POINTER TO THE USER BUFFER
IFNSK.
XERRRET NTEADC ;NOPE, ADDRESS CHECK.
ENDIF.
MOVE P1,T1 ;HANG ON TO BYTE POINTER FOR A WHILE
CALL GETWR1 ;GET BYTE COUNT OF STRING
IFNSK.
XERRRET NTEADC ;NOPE, ADDRESS CHECK.
ENDIF.
STOR T1,NXDAT,+BP.BYT+NMXVAR ;SAVE BYTE COUNT
UMOVEM T1,(T6) ;TRY TO MOVE IT BACK. (MAKE SURE WRITABLE)
IFN FTOPS10,ERJMP NTEADC ;DIDN'T WORK, MUST BE A HIGH SEGMENT.
MOVE T2,T1 ;NUMBER OF BYTES WE WANT TO CHECK
MOVE T1,P1 ;BYTE POINTER WE ARE GOING TO ASK ABOUT
MOVE P1,T6 ;SAVE OUR ARGUMENT LIST POINTER
XCALL (XCDSEC,CHKBPT) ;ASK IF THIS BYTE POINTER IS ANY GOOD
IFNSK.
XERRRET NTEADC ;NOPE, ADDRESS CHECK.
ENDIF.
STOR T1,NXDAT,+BP.BPT+NMXVAR ;SAVE FOR GETBYT
MOVE T6,P1 ;GET BACK POINTER TO THE USER ARG BLOCK
CALL GETWR1 ;MAKE SURE .NTERR IS IN CORE
IFNSK.
XERRRET NTEADC ;NOPE, ADDRESS CHECK.
ENDIF.
UMOVEM T1,(T6) ;TRY TO PUT IT BACK.
IFN FTOPS10,ERJMP NTEADC ;DIDN'T WORK, MUST BE FIRST WORD IN HISEG
RETSKP ;RETURN SUCCESS TO CALLER
IFN FTOPS20,<
;GETWRD & GETWR1 - Get a word from user space
;Call
; T6/ address desired
;Return
; +2 always
GETWR1: AOJ T6, ;POINT TO NEXT WORD
GETWRD: UMOVE T1,(T6) ;GET WORD
RETSKP ;AND RETURN
> ;END IFN FTOPS20
SUBTTL NTMAN -- Dispatch to functions
XSWAPCD ;Section 6 Swapable Code
NMXDIS:
LOAD P1,NXENT,+NMXVAR ;GET ENTITY TYPE
LOAD T1,NXFNC,+NMXVAR ;GET FUNCTION CODE
IFE FTDEBUG <
MOVE T2,<-.NTSLM>+[ ;GET FLAG BITS FOR THIS FUNCTION
>
IFN FTDEBUG <
MOVE T2,<-.NTTEV>+[ ;GET FLAG BITS FOR THIS FUNCTION
NX%ECV ;.NTTEV (check entity)
>
NX%WRM ;.NTSLM (TOPS-20 only)
NX%WRM ;.NTPSI (TOPS-20 ONLY)
NX%WUS ;.NTMAP
NX%WUS ;.NTREX
NX%WRM!NX%ECV ;.NTSET
NX%WRM!NX%ZMC!NX%ECV ;.NTCLR
NX%WRM!NX%ZMC!NX%ECV ;.NTZRO
NX%WUS!NX%ECV ;.NTSHO
NX%WUS!NX%ZMC!NX%WRM!NX%ECV;.NTSZC
NX%WUS ;.NTRET
NX%WUS](T1) ;.NTDQE
STOR T2,NXFLG,+NMXVAR ;SAVE FLAGS WE JUST GOT
TXNN T2,NX%ECV ;SHOULD WE PARSE THE ENTITY?
JRST NMXDI2 ;NO, SKIP OVER
CALL ENTCVT ;CONVERT THE ENTITY TO AN ID
RET ;error...
LOAD T1,NXFNC,+NMXVAR ;GET FUNCTION CODE BACK AGAIN.
NMXDI2:
IFN FTDEBUG <
CAXL T1,.NTTEV
>
IFE FTDEBUG <
CAXL T1,.NTSLM ;RANGE CHECK FUNCTION
>
CAXLE T1,.NTEVQ ; CODE.
BUG.(CHK,NTMFUR,NTMAN,SOFT,<Function code out of range>,,<
Cause: While dispatching by function code, the function code is found
to be out of range. Since the function code the user supplies is
checked in GETBLK, this means that field NXFNC has been trashed
in the meantime.
Action: If this BUG persists, make it dumpable and submit an SPR with the
dump and a copy of MONITR.EXE. If possible, include any known
method for reproducing the problem and/or the state of the system
at the time the BUG was observed.
>,NTEMPE)
CAXL P1,.NTNOD ;RANGE CHECK ENTITY
CAXLE P1,.NTARE ; TYPE.
BUG.(CHK,NTMEOR,NTMAN,SOFT,<Entity type out of range>,,<
Cause: While double checking the entity ID before dispatching
on it, the value was found to be illegal. Since the
value the user supplies is checked at GETBLK, this means that
field NXENT has been trashed.
Action: If this BUG persists, make it dumpable and submit an SPR with the
dump and a copy of MONITR.EXE. If possible, include any known
method for reproducing the problem and/or the state of the system
at the time the BUG was observed.
>,NTEMPE)
IFN FTDEBUG <
CALLRET @.+1-.NTTEV(T1) ;DISPATCH TO APPROPRIATE ROUTINE.
>
IFE FTDEBUG <
CALLRET @.+1-.NTSLM(T1) ;DISPATCH TO APPROPRIATE ROUTINE.
>
IFN FTDEBUG <
IFIW <NTTEV&777777> ;.NTTEV - Test function
>
IFIW <NTSLM&777777> ;.NTSLM - Set global logging mask
IFIW <NTPSI&777777> ;.NTPSI - SET EVENT INTERRUPT (TOPS-20 ONLY)
IFIW <NODMAP&777777> ;.NTMAP - MAP NODE NUMBERS AND NAMES
IFIW <NODLOC&777777> ;.NTREX - RETURN ENTITY ID FOR EXECUTOR
IFIW <PRSPRM&777777> ;.NTSET - SET A PARAMETER
IFIW <PRSPRM&777777> ;.NTCLR - CLEAR A PARAMETER
IFIW <PRSCOU&777777> ;.NTZRO - ZERO COUNTERS
IFIW <SELITM&777777> ;.NTSHO - SHOW PARAMETERS/COUNTERS
IFIW <PRSCOU&777777> ;.NTSZC - SHOW AND ZERO COUNTERS
IFIW @<-.NTNOD>+[ ;.NTRET - LIST ENTITIES
IFIW <NMXLND&777777> ; .NTNOD - NODE
IFIW <NMXLCK&777777> ; .NTLIN - LINE
IFIW <NTEURC&777777> ; .NTLOG - DOESN'T EXIST
IFIW <NMXLCK&777777> ; .NTCKT - CIRCUIT
IFIW <NTEURC&777777> ; .NTMOD - Doesn't exist
IFIW <NTEURC&777777>](P1) ; .NTARE - Doesn't exist
IFIW <NTEVQ&777777> ;.NTEVQ - PASS A QUEUED EVENT TO USER
SUBTTL Functions -- .NTMAP - Map node name/number
;Called from NMXDIS
;Extract parameter from input string, if a number return node name,
; if a name, return node number (Address, or ID).
;Call
; NC/ Pointer to block of data copied from user.
NODMAP:
SAVEAC P1 ;NEED ACS FOR BYTE ROUTINES
CALL GET2BT ;GET NODE NUMBER
RET
STOR T1,NXNUM,+NMXVAR ;STORE ENTITY ID (MAYBE)
CALL GETSTR ;COPY SOME BYTES
RET
JE NXVAL,+NMXVAR,NODMA2 ;IF NO NAME, HE GAVE US AN ADDR
CALL NMXN2A ;CONVERT NAME IN NXVAL TO NUMBER
RET ;Error return
STOR T1,NXNUM,+NMXVAR ;STORE THE NODE ADDRESS AWAY.
NODMA2:
JE NXNUM,+NMXVAR,NTEPAM ;IF NO NODE ADDRESS YET, ILLEGAL.
LOAD T1,NXADR,+NMXVAR ;GET USER'S ARG BLOCK ADDRESS
S1XCT <
UMOVE T1,.NTBPT(T1) ;GET BYTE POINTER AGAIN
STOR T1,NXDAT,+BP.BPT+NMXVAR ;RESET EVERYTHING AGAIN
LOAD T1,NXADR,+NMXVAR ;ARG BLOCK ADDRESS AGAIN
ADDI T1,.NTBYT ;POINT TO BYTE COUNT
UMOVE T1,(T1) ;GET BYTE COUNT FOR DATA STRING
>
STOR T1,NXDAT,+BP.BYT+NMXVAR ;STASH AWAY FOR PUTBYT
LOAD T1,NXNUM,+NMXVAR ;GET NODE ADDRESS BACK
CALL NMXA2N ;CONVERT NODE ADDRESS TO NODE NAME
IFNSK.
LOAD T1,NXERR,+NMXVAR ;Get the error code (If any.)
CAXE T1,NF.URC ;Unrecognized Component?
RET ;No, it is a real error, report it
SETZRO NXVAL,+NMXVAR ;Otherwise, return #, without a name.
SETZRO NXERR,+NMXVAR ;Get rid of the error code
ENDIF.
NODMA3: LOAD T1,NXNUM,+NMXVAR ;GET NODE NUMBER
CALL PUT2BT ;PUT INTO DATA STRING
RET ;error...
XMOVEI P1,NX.VAL+NMXVAR ;POINTER TO STRINGID CONTAINING NODE NAME
CALLRET PUTSTR ;COPY STRING FROM NXVAL TO USER DATA STRING
SUBTTL Functions -- .NTREX - Return local node number
;Called from NMXDIS
NODLOC:
CALL LOCNID ;Get the Local Node Id
RET
CALL PUT2BT ;SEND TWO BYTES INTO THE OUTPUT STRING.
RET ;error
SETZ T1, ;NO NODE NAME (DON'T BOTHER)
CALLRET PUTBYT ;STORE AWAY IN USER STRING
; Get the Local Node Id
;
;Return
; RET ;Error return from ROUTER
; RETSKP ;Local Node ID (Address) in T1
;
LOCNID:
LOAD T1,IBADR,+IBBLK ;Get our node address
RETSKP ;Success....
LOCARE: LOAD T1,IBADR,+IBBLK ;Get our node address
ASH T1,-<^D10> ;Get just the area number
RETSKP
SUBTTL Functions -- .NTSET,.NTCLR - Parse and process a parameter
;Called from NMXDIS
;PRSPRM - Parse a parameter from the data string, and process
;CALL
; T1/ Function (From NXFNC)
;RETURN
; Non skip, on error, with code stored in NXERR
; Skip, no error, parameter has been processed
PRSPRM:
SAVEAC NT
MOVE NT,PRMP(P1) ;GET AOBJN POINTER TO NMXTAB
LOAD T1,NXENT,+NMXVAR ;Get the entity type
STOR T1,NFETY,+NFWBLK ;Store it in the Argument Block
MOVE T3,T1 ;Put Entity type into T3 for upcoming dispatch
LOAD T1,NXNUM,+NMXVAR ;Get the Converted Entity Id
STOR T1,NFEID,+NFWBLK ;And put it into the NFW Arg Block.
JE NXDAT,+BP.BYT+NMXVAR,TABCLR ;IF NO PARAMETER, TRY CLEAR ALL
CALL GET2BT ;GET DATA-ID FIELD.
RET ;error
STOR T1,NFPRM,+NFWBLK ;STORE SEQUENCE NUMBER
;Now search for sequence number in NMXTAB table.
TABSRC: JUMPGE NT,NTEUPT ;IF END OF TABLE, NO SUCH PARAMETER
LOAD T2,NTSEQ,(NT) ;GET AN ENTRY OUT OF THE TABLE.
CAME T1,T2 ;IS THIS THE ENTRY WE ARE LOOKING FOR ?
JRST [ADD NT,[1,,NT.LST] ;INCREMENT POINTER, DECREMENT COUNT
JRST TABSRC] ;AND TRY AGAIN
;NT now points to table entry describing this parameter or counter.
LOAD T1,NTSET,(NT) ;GET SETTABILITY RESTRICTIONS
CAXN T1,NTS.R ;IS IT READ ONLY?
ERRRET NTEOPF ;YEP - HE CAN'T BE WRITING THIS ONE
LOAD T1,NXENT,+NMXVAR ;GET TYPE OF ENTITY
CAXE T1,.NTNOD ;IS IT A NODE?
JRST TABSR1 ;NO, APPLICABILITY DOESN'T APPLY
LOAD T2,NXNTY,+NMXVAR ;GET TYPE OF NODE
MOVE T2,[NTA.E ;BIT INIDICATING EXECUTOR
NTA.R ; REMOTE
NTA.L]-1(T2) ; LOOPBACK
TDNN T2,NT.APL(NT) ;DOES THIS PARAMETER APPLY TO THIS NODE TYPE?
ERRRET NTEPNA ;NO, PARAMETER NOT APPLICABLE
JRST TABSR2 ;Skip over Line/Circuit Check
TABSR1: TXNN T1,<.NTLIN&.NTCKT> ;Is it a LINE or a CIRCUIT?
JRST TABSR2 ;No, don't bother checking Line type
LOAD T2,NXLTY,+NMXVAR ;Get the Line type
MOVE T2,[NTD.D ;Bit indicating DTE
NTD.K ; KDP
NTD.P ; DDP
NTD.C ; CI
NTD.N ; NI
NTD.R]-1(T2) ; DMR
TDNN T2,NT.DEV(NT) ;Does this Parameter apply to this Line Type?
ERRRET NTEPNA ;Parameter Not Applicable
TABSR2: JN NXZMC,+NMXVAR,TABSR3 ;IF ZEROING MONITOR CORE, DON'T GET VALUES
LOAD T1,NTTYP,(NT) ;FIND OUT WHAT KIND OF DATA WE ARE READING
CAXL T1,NT.FC ;IS IT LESSER THAN SIMPLE CODED?
CAXLE T1,NT.FCN ;OR GREATER THAN CIRCUIT NAME
TABSRE: BUG.(CHK,NTMBFP,NTMAN,SOFT,<Bad format type encountered>,,<
Cause: In the process of reading a value from the user string,
descriptor tables have returned an invalid format for this
item. The AC "NT" points to the descriptor for this item, and
field NTSEQ tells which item is being referred to.
Action: If this BUG persists, make it dumpable and submit an SPR with the
dump and a copy of MONITR.EXE. If possible, include any known
method for reproducing the problem and/or the state of the system
at the time the BUG was observed. Fix the entry for this item
to contain a valid format type.
>,NTEMPE)
CALL <-NT.FC>+@[ ;DISPATCH ACCORDING TO FORMAT TYPE
IFIW <NMXRNC&777777> ;ORDINARY CODED.
IFIW <TABSRE&777777> ;CODED MULTIPLE. ILLEGAL
IFIW <TABSRE&777777> ;ASCII IMAGE. ILLEGAL
IFIW <NMXRNU&777777> ;DECIMAL UNSIGNED.
IFIW <NMXRNS&777777> ;DECIMAL SIGNED.
IFIW <NMXRNU&777777> ;HEX INTEGER.
IFIW <NMXRHI&777777> ;HEX IMAGE. STRING ID.
IFIW <NMXRNU&777777> ;OCTAL - READ AS DECIMAL UNSIGNED
IFIW <NMXRNM&777777> ;MILLISECONDS (REALLY DECIMAL UNSIGNED)
IFIW <TABSRE&777777> ;VERSION NUMBER. ILLEGAL, READ-ONLY
IFIW <TABSRE&777777> ;NODE ENTITY ID. ILLEGAL, READ-ONLY
IFIW <NMXRNN&777777> ;NODE NAME (IN ASCII IMAGE FORMAT)
IFIW <NMXRCN&777777>](T1) ;CIRCUIT NAME. (IN ASCII IMAGE FORMAT)
RET ;PROPAGATE ERROR
MOVX T1,NF.SET ;Get the SET PARAMETER function code
SKIPA ;Skip
TABSR3: MOVX T1,NF.CLR ;Get the CLEAR PARAMETER function code
XMOVEI T2,NFWBLK ;Put address of the Arg Block in T2
LOAD T3,NTROU,(NT) ;GET ROUTINE FOR THIS PARAMETER
CALL NMXLAY ;HAVE THE LAYER DO THE REST.
JRST NTEERR ;Go report the error
JE NFBFF,+NFWBLK,RSKP ;If no buffer,we are finished
LOAD T1,NFBUF,+NFWBLK ;Get the buffer address
CALL DNFWDS ;Deallocate it
SETZRO NFBUF,+NFWBLK ;Get rid of the address
SETZRO NFBFF,+NFWBLK ;and the flag
RETSKP ;FINISHED
;Logic for CLEAR ALL command
TABCLR: TMNN NXZMC,+NMXVAR ;ARE WE DOING A CLEAR?
ERRRET NTEPAM ;NOPE, PARAMETER MISSING
TABCL1: JUMPGE NT,RSKP ;DONE WHEN POSITIVE
LOAD T1,NTSET,(NT) ;GET SETTABILITY RESTRICTIONS
CAXE T1,NTS. ;ARE THERE ARE RESTRICTIONS?
JRST TABCL5 ;YES, IGNORE THIS PARAMETER
LOAD T1,NXENT,+NMXVAR ;GET ENTITY TYPE
CAXE T1,.NTNOD ;IS IT NODE?
JRST TABCL2 ;NOPE, APPLICABILITY DOESN'T APPLY
LOAD T1,NXNTY,+NMXVAR ;GET TYPE OF NODE
MOVE T1,[NTA.E
NTA.R
NTA.L]-1(T1) ;GET BITS REPRESENTING APPLICABILITY
TDNN T1,NT.APL(NT) ;DOES THIS APPLY TO THIS NODE?
JRST TABCL5 ;NOPE, BYPASS IT
TABCL2: TXNN T1,<.NTLIN&.NTCKT> ;Is it a LINE or a CIRCUIT?
JRST TABCL3 ;No, don't bother checking Line type
LOAD T2,NXLTY,+NMXVAR ;Get the Line type
MOVE T2,[NTD.D ;Bit indicating DTE
NTD.K ; KDP
NTD.P ; DDP
NTD.C ; CI
NTD.N ; NI
NTD.R]-1(T2) ; DMR
TDNN T2,NT.DEV(NT) ;Does this Parameter apply to this Line Type?
JRST TABCL5 ;NOPE, BYPASS IT
TABCL3: CALL TABSR3 ;Go CLEAR this parameter
RET ;Error
TABCL5: ADD NT,[1,,NT.LST] ;INCREMENT POINTER, DECREMENT COUNT
JRST TABCL1 ;AND DO THE NEXT PARAMETER
SUBTTL Counter Functions
;PRSCOU - Counter Functions Routine.
; All three JSYS Counter Functions dispatch to here. The
; NFWBLK Block is set up, a memory block is allocated,
; and the NMX function code is stored in T1.
; We then dispatch off of the Entity Type field to the
; routines which call the layers.
;Note: this routine is also called from LLINKS. NSP needs a little
; help to generate the NICE message of the NSP node counters on a
; "database reused" event.
;
;LLINKS sets up a NMXVAR and NFWBLK TRVAR's, so it mimics the higher
; layers of NTMAN.
PRSCOU:
LOAD T1,NXENT,+NMXVAR ;Get the Entity Type
STOR T1,NFETY,+NFWBLK ;Put entity Type into NFWBLK
LOAD T1,NXNUM,+NMXVAR ;Get the Entity ID (Already converted)
STOR T1,NFEID,+NFWBLK ;Copy it into NFWBLK
MOVX T1,COUBLK ;Get the size of a counter block
STOR T1,NFBLN,+NFWBLK ;Copy it into NFWBLK
CALL DNGWDS ;Get buffer of that length
ERRRET NTERES ;Resource Error
STOR T1,NFBUF,+NFWBLK ;Put Buffer Address into NFWBLK
SETONE NFBFF,+NFWBLK ;Flag that we sre sending a buffer to the layer
LOAD T2,NXFNC,+NMXVAR ;Get the JSYS function code
IFE FTDEBUG <
MOVE T1,<-.NTSLM>+[ ;GET FLAG BITS FOR THIS FUNCTION
>
IFN FTDEBUG <
MOVE T1,<-.NTTEV>+[ ;GET FLAG BITS FOR THIS FUNCTION
NF.ILG ;.NTTEV (check entity)
>
NF.ILG ;.NTSLM (TOPS-20 only)
NF.ILG ;.NTPSI (TOPS-20 ONLY)
NF.ILG ;.NTMAP
NF.ILG ;.NTREX
NF.ILG ;.NTSET
NF.ILG ;.NTCLR
NF.SZC ;.NTZRO
NF.COU ;.NTSHO
NF.SZC ;.NTSZC
NF.ILG ;.NTRET
NF.ILG](T2) ;.NTDQE
SKIPGE T1 ;Skip if Function code is alright
JRST [ LOAD T1,NFBUF,+NFWBLK ;Put the buffer address back into T1
CALL DNFWDS ;Return the block
SETZRO NFBUF,+NFWBLK ;Get rid of the address
SETZRO NFBFF,+NFWBLK ;and the flag
BUG.(CHK,NTMICF,NTMAN,SOFT,<Non-counter function in PRSCOU>,,<
Cause: There is an illegal function in the PRSCOU routine. NXFNC
is wrong.
Action: If this BUG persists, make it dumpable and submit an SPR with the
dump and a copy of MONITR.EXE. If possible, include any known
method for reproducing the problem and/or the state of the system
at the time the BUG was observed.
>,NTEMPE)]
LOAD T2,NXENT,+NMXVAR ;Get the Entity Type so we can dispatch
CALL <-.NTNOD>+@[ ;Dispatch according to Entity Type
IFIW <PRSNDC&777777> ;Node Counters
IFIW <PRSLNC&777777> ;Line Counters
IFIW <NTEUFO&777777> ;Logging Counters (There are none!)
IFIW <PRSCKC&777777> ;Circuit Counters
IFIW <NTEUFO&777777> ;Module Counters (None)
IFIW <NTEUFO&777777>](T2) ;Area Counters (None)
RET ;Error has been reported and buffer deallocated
LOAD T1,NFBUF,+NFWBLK ;Get the Counter Block Address
CALL DNFWDS ;Return the block
SETZRO NFBUF,+NFWBLK ;Get rid of the address
SETZRO NFBFF,+NFWBLK ;and the flag
RETSKP ;return success
SUBTTL PRSNDC - Process Node counters
;Show Node counters (and maybe Zero)
;Call
; T1/ Function Code (NF.COU or NF.SZC)
; NFWBLK is all set up for call to ECLNMX and RTRNMX
;Return
; RET on error, error code in T1
; RETSKP, via PRSCBK on success
PRSNDC:
SAVEAC <P1> ;Will store Function code here
MOVE P1,T1 ; so we have it for RTRNMX call
XMOVEI T2,NFWBLK ;And NF Block address in T2
CALL ECLNMX ;Call the End Communication Layer
IFNSK.
SKIPE T1 ;Is there 'error' return zero??
JRST NTEERR ;No. Report error and deallo buffer if there
SETONE NXNIL,+NMXVAR ;Indicate no info returned, but no error
ENDIF.
LOAD T1,NFBUF,+NFWBLK ;Get the Counter Block Address
LOAD T2,NFBLN,+NFWBLK ;and the # of words written
CALL PRSCBK ;Go parse the counter block
RET
SETZRO NXNIL,+NMXVAR ;Make sure the No Information bit is clear
CALL LOCNID ;Get the Local node number
RET
LOAD T2,NFEID,+NFWBLK ;Get the Node Number back
CAME T1,T2 ;Is it our node number
RETSKP ;No, Return. ROUTER has EXECUTOR COUNTERS only
MOVX T1,COUBLK ;We have to reset the Buffer Length because
STOR T1,NFBLN,+NFWBLK ; ECLNMX returned bytes written there.
MOVE T1,P1 ;Put function code in T1
XMOVEI T2,NFWBLK ;And NF Block address in T2
CALL RTRNMX ;Call the End Communication Layer
IFNSK.
SKIPE T1 ;Is there 'error' return zero??
JRST NTEERR ;No. Report error and deallo buffer if there
SETONE NXNIL,+NMXVAR ;Indicate no info returned, but no error
ENDIF.
LOAD T1,NFBUF,+NFWBLK ;Get the Counter Block Address
LOAD T2,NFBLN,+NFWBLK ;and the # of words written
CALLRET PRSCBK ;Go parse the counter block
SUBTTL PRSCKC - Process Circuit counters
;Show Circuit counters (and maybe Zero)
;Call
; T1/ Function Code (NF.COU or NF.SZC)
; NFWBLK is all set up for call to RTRNMX and DNDNMX
;Return
; RET on error, error code in T1
; RETSKP, via PRSCBK on success
PRSCKC:
SAVEAC <P1> ;Will store Function code here
MOVE P1,T1 ; so we have it for DNDNMX call
XMOVEI T2,NFWBLK ;And NF Block address in T2
CALL RTRNMX ;Call the End Communication Layer
IFNSK.
SKIPE T1 ;Is there 'error' return zero??
JRST NTEERR ;No. Report error and deallo buffer if there
SETONE NXNIL,+NMXVAR ;Indicate no info returned, but no error
ENDIF.
LOAD T1,NFBUF,+NFWBLK ;Get the Counter Block Address
LOAD T2,NFBLN,+NFWBLK ;and the # of words written
CALL PRSCBK ;Go parse the counter block
RET
SETZRO NXNIL,+NMXVAR ;Make sure the No Information bit is clear
MOVX T1,COUBLK ;We have to reset the Buffer Length because
STOR T1,NFBLN,+NFWBLK ; ECLNMX returned bytes written there.
MOVE T1,P1 ;Put function code in T1
XMOVEI T2,NFWBLK ;And NF Block address in T2
CALL DNDNMX ;Call the End Communication Layer
IFNSK.
SKIPE T1 ;Is there 'error' return zero??
JRST NTEERR ;No. Report error and deallo buffer if there
SETONE NXNIL,+NMXVAR ;Indicate no info returned, but no error
ENDIF.
LOAD T1,NFBUF,+NFWBLK ;Get the Counter Block Address
LOAD T2,NFBLN,+NFWBLK ;and the # of words written
CALLRET PRSCBK ;Go parse the counter block
SUBTTL PRSLNC - Process Line Counters
;Show (and maybe Zero) Line counters
;Call
; T1/ Function Code
; NFWBLK is all set up for call to DNDNMX
;Return
; RET on error
; RETSKP on success
PRSLNC:
XMOVEI T2,NFWBLK ;And NF Block address in T2
CALL DNDNMX ;Call the Data Link Layer
IFNSK.
SKIPE T1 ;Is there 'error' return zero??
JRST NTEERR ;No. Report error and deallo buffer if there
SETONE NXNIL,+NMXVAR ;Indicate no info returned, but no error
ENDIF.
LOAD T1,NFBUF,+NFWBLK ;Get the Counter Block Address
LOAD T2,NFBLN,+NFWBLK ;and the # of words written
CALLRET PRSCBK ;Go parse the counter block
SUBTTL Parse Counter block and build NICE response
;PRSCBK - Parse the counter block passed back from a DECnet layer
;
;Call
; T1/ Counter Block Address
; T2/ Number of words written in block
;Return
; RET ;If error
; RETSKP ;If counter block handled OK
;
PRSCBK:
JN NXNIL,+NMXVAR,RSKP ;If Layer didn't know about him, ignore it.
JE NXWUS,+NMXVAR,RSKP ;IF NOT WRITING TO THE USER, RETURN
SAVEAC <P1,P2> ;P1<=Block Addr., P2<= # of words
MOVE P1,T1
MOVE P2,T2
COULOP: LOAD T1,KBWID,(P1) ;GET COUNTER SIZE
CAXN T1,40 ;IS IT SIZE 32.
MOVX T1,30 ;NICE WANTS IT TO GET A 30 (octal)
ASH T1,^D10 ;SHIFT IT INTO WIDTH FIELD OF HEADER FIELD
TXO T1,1_^D15 ;TURN ON BIT INDICATING A COUNTER HEADER
TMNE KBBMF,(P1) ;Check for a Bit Mask Field, skip if none
TXO T1,1_^D12 ;set "Bit Mask" bit
LOAD T2,KBTYP,(P1) ;GET SEQUENCE NUMBER OF PARAMETER OR COUNTER
IOR T1,T2 ;OR INTO HEADER DUO-BYTE
CALL PUT2BT ;PUT 2 BYTES OF HEADER INTO USER DATA STRING
RET ;error...
TMNE KBBMF,(P1) ;Skip over code that puts in Bit mask, if none
IFNSK.
LOAD T1,KBMSK,(P1) ;Get the Bit mask from the Counter Block
CALL PUT2BT ;Put 2 bytes of bit mask into user data string
RET ;error...
ENDIF.
NOBITM: LOAD T1,KBWID,(P1) ;Get the counter width
MOVX T2,1 ;we are going to calculate overflow value in T2
LSH T2,(T1) ;Shift over counter width times, decrement
SUBI T2,1 ; to get Max Counter value, and complement
SETCA T2,T2 ; it to get the bits that should not be set.
LOAD T1,KBVAL,(P1) ;Now get the 36-bit counter value returned
TDNE T1,T2 ;Skip if we do not have a counter overflow.
IFNSK.
SETCA T2,T2 ;Set the mask back to the Max Counter value
STOR T2,KBVAL,(P1) ;Put max value into counter block
;Now go and store the counter value
ENDIF.
STORCV: LOAD T2,KBWID,(P1) ;GET NUMBER OF BYTES FOR COUNTER AGAIN
LOAD T1,KBVAL,(P1) ;GET VALUE TO RETURN
ASH T2,-3 ;Right justify width
CAXL T2,1 ;MUST BE AT LEAST ONE BYTE
CAXLE T2,4 ;MAY BE AT MOST 4 BYTES
COULNE: BUG.(CHK,NTMBCL,NTMAN,SOFT,<Bad counter byte length>,,<
Cause: While generating output for a numeric field, there has been a
request to generate an illegal number of bytes.
Action: If this BUG persists, make it dumpable and submit an SPR with the
dump and a copy of MONITR.EXE. If possible, include any known
method for reproducing the problem and/or the state of the system
at the time the BUG was observed.
>,NTEMPE)
CALL <-1>+@[IFIW <PUTBYT&777777> ;PUT A SINGLE BYTE
IFIW <PUT2BT&777777> ;PUT A DUO BYTE
IFIW <COULNE&777777> ;DO THREE BYTES. ILLEGAL
IFIW <PUT4BT&777777>](T2) ;4 BYTES.
RET ;error...
JE KBBMF,(P1),ADDTWO ;Skip over code for Bit Masks
SKIPA T1,[3] ;Three words if Bit Mask was included
ADDTWO: MOVX T1,2 ;Only two words if no bit mask
ADD P1,T1 ;Move the address pointer down the block
SUB P2,T1 ;decrement the count of words in buffer
JUMPG P2,COULOP ;do more counters if any left
SKIPE P2 ;Count is zero, OK
BUG.(CHK,NTMCBL,NTMAN,SOFT,<Bad Counter Block length>,,<
Cause: A DECnet Layer has returned an invalid length for a
Counter Block.
Action: If this BUG persists, make it dumpable and submit an SPR with the
dump and a copy of MONITR.EXE. If possible, include any known
method for reproducing the problem and/or the state of the system
at the time the BUG was observed.
>,NTEMPE)
RETSKP
SUBTTL Functions -- .NTSHO -- Select parameters to return
;SELITM - Select items from list of parameters for an entity, and
; write their values to the user string
;Call
; P1/ Type of entity
;Return
; RET ;on error, NXERR contains code
; RETSKP ;success, all info for this entity in string
;
SELITM:
SAVEAC <P1,P2,P3,NT> ;GET SOME WORK REGISTERS
LOAD T1,NXSEL,+NMXVAR ;GET SELECTION CRITERIA
CAXL T1,.NTSUM ;RANGE CHECK SELECTION CRITERIA
CAXLE T1,.NTCST ;CIRCUIT STATE IS HIGHEST.
BUG.(CHK,NTMSOR,NTMAN,SOFT,<Selection criteria is out of range>,,<
Cause: The criteria is out of range for selecting items to return (for .NTSHO)
dependent on the selection criteria.
Action: If this BUG persists, make it dumpable and submit an SPR with the
dump and a copy of MONITR.EXE. If possible, include any known
method for reproducing the problem and/or the state of the system
at the time the BUG was observed. Analyze the dump and fix the
check in GETBLK or find out who is trashing field NXSEL.
>,NTEUFO)
CAXN T1,.NTCOU ;IS THIS SHOW COUNTERS?
JRST PRSCOU ;Yes, jump to Counter Processing Routine
MOVE NT,PRMP(P1) ;NOPE, GET POINTER TO PARAMETERS
MOVE P1,<-.NTSUM>+[NTI.% ;SUMMARY BIT
NTI.S ;STATUS BIT
NTI.C ;CHARACTERISTICS BIT
NTI.N ;NOOP (COUNTERS NOT HANDLED HERE)
NTI.N ;NOOP (EVENTS NOT HANDLED HERE)
NTI.K](T1) ;CIRCUIT STATE BIT
LOAD T1,NXNTY,+NMXVAR ;GET NODE TYPE (REMOTE, EXECUTOR...)
CAXL T1,0 ;RANGE CHECK NODE TYPE (LOWEST IS NONE)
CAXLE T1,NX.LPN ;LOOPBACK IS HIGHEST YET.
BUG.(CHK,NTMNTR,NTMAN,SOFT,<Node type is out of range>,,<
Cause: It is necessary to know the node type (executor,remote, or loop)
to select entries to return (for function .NTSHO). Other entities
(circuit, lines) should have this field zero. This field is set by
ENTCVT.
Action: If this BUG persists, make it dumpable and submit an SPR with the
dump and a copy of MONITR.EXE. If possible, include any known
method for reproducing the problem and/or the state of the system
at the time the BUG was observed.
>,NTEMPE)
MOVE P2,[NTAPL ;NO NODE TYPE, DO THEM ALL
NTA.E ;BIT INDICATING APPLIES TO EXECUTOR NODE
NTA.R ;APPLIES TO REMOTE NODES
NTA.L](T1) ;APPLIES TO LOOPBACK NODES
LOAD T1,NXLTY,+NMXVAR ;GET LINE TYPE (CI, NI, DTE,...)
CAXL T1,0 ;RANGE CHECK LINE TYPE (LOWEST IS NONE)
CAXLE T1,NX.DMR ;DMR IS HIGHEST.
BUG.(CHK,NTMLTR,NTMAN,SOFT,<Line type is out of range>,,<
Cause: To determine entries to return (for function .NTSHO),
it is necessary to know the Line type (CI,NI,DTE,...).
Other entities (Nodes,Modules) should have this field
zero. This field is set by ENTCVT.
Action: If this BUG persists, make it dumpable and submit an SPR with the
dump and a copy of MONITR.EXE. If possible, include any known
method for reproducing the problem and/or the state of the system
at the time the BUG was observed.
>,NTEMPE)
MOVE P3,[NTDEV ;NO LINE TYPE, DO THEM ALL
NTD.D ;APPLIES TO DTE'S
NTD.K ;APPLIES TO KDP'S
NTD.P ;DDP'S
NTD.C ;CI'S
NTD.N ;NI'S
NTD.R](T1) ;DMR'S
SELIT4: JUMPGE NT,RSKP ;WHEN DONE, RETURN SUCCESS
LOAD T2,NXENT,+NMXVAR ;Get the Entity Type
CAXE T2,.NTNOD ;Is it a NODE Entity?
IFSKP.
CALL LOCARE ;Yes, go get Home Area number
JRST NTEERR
LOAD T2,NXNUM,+NMXVAR ;Get the Node address from the user
TXZ T2,RN%NOD ;Get just the AREA Number
LSH T2,-^D10 ; Right justify
CAMN T1,T2 ;Is the requested node in the Home Area?
IFSKP. ;No, Check if parameter is for Home Area only
MOVX T1,NTA.H ;Put Home Area Only flag into T1
TDNE T1,NT.APL(NT) ;Check Parameter applicabilty
JRST SELIT6
ENDIF.
ENDIF.
TDNE P1,NT.INF(NT) ;DOES THIS MATCH OUR SELECTION CRITERIA?
TDNN P2,NT.APL(NT) ;AND DOES THIS APPLY TO US?
SKIPA ;NOPE. SKIP OVER IT
TDNN P3,NT.DEV(NT) ;Does it apply to this device?
JRST SELIT6 ;NOPE. SKIP OVER IT
MOVX T1,NTI.Q ;Get the 'Qualified Parameter' bit flag
TDNE T1,NT.INF(NT) ;Skip if this parameter is not qualified
IFSKP.
CALL SHOPRM ;Go SHOW QUALIFIED PARAMETER
RET ;Error return...
ELSE.
CALL SHOQUP ;YEP. DO THIS PARAMETER
RET ;error, punt...
ENDIF.
SELIT6: ADD NT,[1,,NT.LST] ;POINT TO NEXT ITEM ON LIST
JRST SELIT4 ;GO TRY FOR THIS NEW ITEM
SUBTTL Functions -- .NTSHO -- Get the Qualifier values, for a Qualified Parameter
;SHOQUP - Show qualified Parameter.
SHOQUP: SAVEAC <P1,P2,P3,P4,NT>
LOAD T1,NXENT,+NMXVAR ;Get the Entity Type Back
MOVE P1,NT ;Save the Qualified Parameter table entry
MOVE NT,PRMP(T1) ;Get the pointer to top of the parameter table
LOAD T1,NTQUA,(P1) ;Get the Qualifier Parameter Number
SHOQU1: JUMPGE NT,NTEMPE ;If we hit the end of table, we have an error
LOAD T2,NTSEQ,(NT) ;Get a Sequence number
CAME T1,T2 ;Is it our Qualifier????
IFNSK.
ADD NT,[1,,NT.LST] ;NO! Get next entry in table
JRST SHOQU1 ;And loop until we find it....
ENDIF.
MOVE T1,NT ;Get the Table Entry address for the Qualifier
CALL SETNFB ;Set up the NF Block
RET ;error
MOVX T1,NF.RED ;Set up READ function code
XMOVEI T2,NFWBLK ;And the argument block goes into T2
LOAD T3,NTROU,(NT) ;GET ROUTINE FOR THIS PARAMETER
CALL NMXLAY ;CALL LAYER-LEVEL ROUTINE TO DO PARAMETER
IFNSK.
SKIPE T1 ;Is there 'error' return zero??
JRST NTEERR ;No. Report error and deallo buffer if there
SETONE NXNIL,+NMXVAR ;Indicate no info returned, but no error
ENDIF.
JE NFBFF,+NFWBLK,ONEQUA ;Jump if only One qualifier, (i.e no buffer)
LOAD P2,NFBUF,+NFWBLK ;Get the buffer address back into P2
MOVE P4,P2 ;Keep the head of the buffer address in P4
LOAD P3,NFBLN,+NFWBLK ;And the number of words written...
JUMPE P3,SHOQU3 ;Jump if no values returned
SETZRO NFBFF,+NFWBLK ;indicate no buffer present.
SHOQU2: MOVE T1,(P2) ;Get the first Qualifier value
STOR T1,NFBUF,+NFWBLK ;Put the value into the Buffer/value field
CALL NMXWTY ;Write qualifier value to user buffer
IFNSK.
MOVE T1,P4 ;Get the buffer address back into T1
CALL DNFWDS ;And return buffer
RET
ENDIF.
EXCH NT,P1 ;Get the Qualified parameter table entry
MOVE T1,NT ;Put the Parameter Table Entry address into T1
CALL SETNFB ;Set up the Interface Block
IFNSK.
MOVE T1,P4 ;Get the buffer address back into T1
CALL DNFWDS ;Deallocate it.
RET ;error return, buffer has been deallocated
ENDIF.
MOVE T1,(P2) ;Get the first Qualifier value again
STOR T1,NFQUA,+NFWBLK ;Store it in the Qualifier Field
SETONE NFQUF,+NFWBLK ;Flag we are sending a qualifier
MOVX T1,NF.RED ;Set up READ function code
XMOVEI T2,NFWBLK ;And the argument block goes into T2
LOAD T3,NTROU,(NT) ;GET ROUTINE FOR THIS PARAMETER
CALL NMXLAY ;CALL LAYER-LEVEL ROUTINE TO DO PARAMETER
IFNSK.
SKIPE T1 ;Is there 'error' return zero??
IFNSK.
STOR P4,NFBUF,+NFWBLK ;Put buffer back in NFWBLK
SETONE NFBFF,+NFWBLK ;NTEERR will deallocate buffer for us
JRST NTEERR ;No. Report error and deallo buffer if there
ENDIF.
SETONE NXNIL,+NMXVAR ;Indicate no info returned, but no error
ENDIF.
CALL NMXWTY ;WRITE STRING OUT TO USER IN APPROPRIATE FORMAT
IFNSK.
MOVE T1,P4 ;Get the buffer address back into T1
CALL DNFWDS ;Deallocate it.
RET ;error return, buffer has been deallocated
ENDIF.
EXCH NT,P1 ;Get the Qualifier parameter table entry
AOJ P2, ;Increment the buffer pointer
SOJG P3,SHOQU2 ;Jump if more qualifiers
SHOQU3: MOVE T1,P4 ;Get the buffer address back
CALL DNFWDS ;Deallocate the buffer
RETSKP
ONEQUA: JN NXNIL,+NMXVAR,RSKP ;Return if layer didn't know about Qualifier
CALL NMXWTY ;Write qualifier value to user string
RET ;Error return...
EXCH NT,P1 ;Get the Qualified Parameter table entry
LOAD P1,NFBUF,+NFWBLK ;Save the Qualifier value
MOVE T1,NT ;Now put it into T1
CALL SETNFB ;Set up the NFWBLK
RET
STOR P1,NFQUA,+NFWBLK ;Store it in the Qualifier Field
SETONE NFQUF,+NFWBLK ;Flag we are sending a qualifier
JRST SHOPR1 ;And jump into SHOPRM
SUBTTL Functions -- .NTSHO -- Return parameters to user
;SHOPRM - Process a parameter, and put into user data string
SHOPRM: SAVEAC <P1,P2,NT,TM> ;SAVE A BUNCH OF ACS (TRASHED IN CM HANDLING)
MOVE T1,NT ;Put the Parameter Table Entry address into T1
CALL SETNFB ;Set up the Interface Block
RET
SHOPR1: MOVX T1,NF.RED ;Set up READ function code
XMOVEI T2,NFWBLK ;And the argument block goes into T2
LOAD T3,NTROU,(NT) ;GET ROUTINE FOR THIS PARAMETER
CALL NMXLAY ;CALL LAYER-LEVEL ROUTINE TO DO PARAMETER
IFNSK.
SKIPE T1 ;Is there 'error' return zero??
JRST NTEERR ;No. Report error and deallo buffer if there
SETONE NXNIL,+NMXVAR ;Indicate no info returned, but no error
ENDIF.
CALL NMXWTY ;WRITE STRING OUT TO USER IN APPROPRIATE FORMAT
RET ; error return
JE NFBFF,+NFWBLK,RSKP ;If no buffer,we are finished
LOAD T1,NFBUF,+NFWBLK ;Get the buffer address
CALL DNFWDS ;Deallocate it
SETZRO NFBUF,+NFWBLK ;Get rid of the address
SETZRO NFBFF,+NFWBLK ;and the flag
RETSKP ;FINISHED
;Setup NMX Interface Block
;Call:
; T1/ Address of a Parameter Table Entry
;Return
;
; RET error return
; RETSKP NFWBLK/ All set up for a call to a DECnet Layer
;
SETNFB: SAVEAC <NT> ;Preserve NT
MOVE NT,T1 ;Put parameter table entry address here
SETZM NFWBLK ;CLEAN FIRST WORD OF BLOCK
HRRI T2,1+NFWBLK ;GET POINTER TO SECOND WORD IN BLOCK
HRLI T2,NFWBLK ;POINT AT START OF BLOCK
BLT T2,NF.LST-1+NFWBLK ;CLEAN UNTIL END OF BLOCK
LOAD T1,NXNUM,+NMXVAR ;Get the converted Entity Id
STOR T1,NFEID,+NFWBLK ;Put it int the argument block
LOAD T1,NTSEQ,(NT) ;Get the parameter type (number) from the table
STOR T1,NFPRM,+NFWBLK ;and into the argument block
LOAD T1,NXENT,+NMXVAR ;We need the Entity type
STOR T1,NFETY,+NFWBLK ;save it...
JE NTBUF,(NT),SETNF1 ;Does this Parameter require a buffer
LOAD T1,NTBSZ,(NT) ;Yes, get the size needed from table
STOR T1,NFBLN,+NFWBLK ;Put it into the argument block
CALL DNGWDS ;Go allocate the block
ERRRET NTERES ;No memory available, resource error
STOR T1,NFBUF,+NFWBLK ;Put the buffer addr into the arg block
SETONE NFBFF,+NFWBLK ;And tell Layer to expect a buffer
RETSKP
SETNF1: SETZRO NFBFF,+NFWBLK ;No buffer in this case.
SETZRO NFBUF,+NFWBLK ;Get rid of the buffer address
RETSKP
SUBTTL Functions -- .NTRET -- List node names
;NMXLND - List a series of node names. Function .NTRET
;Call
; NMXVAR/ NX block
;Return
; RET ;On error, error code loaded into NXERR,+NMXVAR
; RETSKP ;Success, with user's data string containing list
NMXLND:
SAVEAC <P1,P2,NT> ;I NEED A LOT OF ACS
MOVX T1,.NTNOD ;Get the NODE ENTITY TYPE code
STOR T1,NFETY,+NFWBLK ;Put it into the Arg Block
SETZ NT, ;FLAG NOTHING SPECIAL YET
LOAD P1,NXSEL,+NMXVAR ;FIND OUT WHAT KIND OF LIST HE WANTS
STOR P1,NFSEL,+NFWBLK ;Put it into the NF Block
CAXL P1,.NTSGN ;Range Check the Selection Criteria
CAXLE P1,.NTKNO ;If not between SIGNIFICANT & KNOW
JRST NTEUFO ; it is an error
JRST <-.NTSGN>+@[
IFIW <NTEUFO&777777> ;SIGNIFICANT nodes not supported
IFIW <NMXLAD&777777> ;ADJACENT nodes
IFIW <NMXLLN&777777> ;LOOP Nodes
IFIW <NMXLAC&777777> ;ACTIVE Nodes
IFIW <NMXLNA&777777>](P1) ;KNOWN Nodes
NMXLNA: CALL GETEBY ;Get the Area Number user wants
RET ;Error return
STOR T1,NFEID,+NFWBLK ;Put it into the Argument Block
MOVE NT,T1 ;And save it in a register for now
CALL LOCARE ;Get the local Node Id
RET ;Error Return
CAME T1,NT ;Does user want the Home Area????
JRST NMXLFA ;No, go ask Session Control
MOVX T1,NDBLEN ;Length of a Node Bffer
CALL DNGWZP ;Get a Zeroed Buffer (Low Priority)
JRST NTERES ;Resource Error
STOR T1,NFBUF,+NFWBLK ;Put it into the arg block
SETONE NFBFF,+NFWBLK ;Tell the layers we are giving them a buffer
MOVX T1,NDBLEN ;Get the buffer length
STOR T1,NFBLN,+NFWBLK ;So the layer knows how long it is.
MOVX T1,NF.RET ;Get the function code
XMOVEI T2,NFWBLK ;and the Arg Block address
CALL SCLNMX ;Ask Session Control for KNOWN NODES
IFNSK.
SKIPE T1 ;Is there 'error' return zero??
JRST NTEERR ;and go report the error
JRST NMXLA2 ;Return OK, No Data....
ENDIF.
MOVX T1,NF.RET ;Get the function code
XMOVEI T2,NFWBLK ;and the Arg Block address
CALL RTRNMX ;Ask Routing Layer for KNOWN NODES
IFNSK.
SKIPE T1 ;Is there 'error' return zero??
JRST NTEERR ;and go report the error
JRST NMXLA2 ;Return OK, No Data....
ENDIF.
LOAD P2,NFBUF,+NFWBLK ;Get the buffer address into P2
ADDI P2,1 ;START AT NODE NUMBER 1
NMXLN2: LOAD T1,NFBUF,+NFWBLK ;Get Buffer address
ADDI T1,<NDBLEN-1> ;Find the end of the buffer
CAMLE P2,T1 ;HAVE WE PASSED THE MAXIMUM NODE NUMBER?
IFNSK.
LOAD T1,NFBUF,+NFWBLK ;Get the Counter Block
CALL DNFWDS ;Free up memory
SETZRO NFBUF,+NFWBLK ;Get rid of the address
SETZRO NFBFF,+NFWBLK ;and the flag
JRST RSKP ;Yes, we are all done
ENDIF.
MOVE T1,(P2) ;Get the contents of this cell
SKIPN T1 ;Are the contents zero???
AOJA P2,NMXLN2 ;If so increment index, and loop
CALL PUT2BT ;PUT NODE NUMBER IN DATA STRING
RET
SETZ T1, ;NO NAME FOLLOWING, SO A ZERO STRINGID HEAD
CALL PUTBYT ;PUT BYTE IN DATA STRING
RET
AOJA P2,NMXLN2 ;GO DO ANOTHER NODE
;Ask Session Control for KNOWN NODES in a Specific area, other than
;the Home area.
NMXLFA:
LOAD T1,NXDAT,+BP.BPT+NMXVAR ;Get the Byte pointer to the user buffer
STOR T1,NFBPT,+NFWBLK ;Put it into the Arg block
LOAD T1,NXDAT,+BP.BYT+NMXVAR ;Get the number of bytes in the user buf.
STOR T1,NFBLN,+NFWBLK ;Send it to Session control
SETONE NFUBF,+NFWBLK ;Flag it is a user buffer
MOVX T1,NF.RET ;Get the function code
XMOVEI T2,NFWBLK ;and the Arg Block address
CALL SCLNMX ;Ask Session Control for Known Nodes
JRST NTEERR ;Report error and deallocate buffer
SETZRO NFUBF,+NFWBLK ;Get rid of the User buffer flag
LOAD T1,NFBPT,+NFWBLK ;Get the byte pointer back
STOR T1,NXDAT,+BP.BPT+NMXVAR ;Put it back where NTMAN expects it
LOAD T1,NFBLN,+NFWBLK ;And the updated count
STOR T1,NXDAT,+BP.BYT+NMXVAR ;And save it again
RETSKP ;return success
;Ask Session Control for LOOP NODES
NMXLLN: MOVX T1,LPNBLK ;Get the size of a LOOP NODE Block
STOR T1,NFBLN,+NFWBLK ;Copy it into NFWBLK
CALL DNGWDS ;Get buffer of that length
ERRRET NTERES ;Resource Error
STOR T1,NFBUF,+NFWBLK ;Put Buffer Address into NFWBLK
SETONE NFBFF,+NFWBLK ;Flag that we sre sending a buffer to the layer
MOVX T1,.NTNOD ;Get the NODE ENTITY TYPE code
STOR T1,NFETY,+NFWBLK ;Put it into the Arg Block
MOVX T1,NF.RET ;Get the function code
XMOVEI T2,NFWBLK ;and the Arg Block address
CALL SCLNMX ;Ask Session Control for LOOP NODES
JRST NTEERR ;Report error and Deallocate buffer
LOAD NT,NFBUF,+NFWBLK ;Get the Buffer address back
LOAD P2,NFBLN,+NFWBLK ;Get the number of words written into buffer
JUMPE P2,NMXLN6 ;Jump if no Loop nodes returned...
NMXLN5: MOVE T1,(NT) ;Get the name
CALL NMXS2A ;Convert Node name to ASCII and save in NMXVAR
SETZ T1, ;NO NUMBER
CALL PUT2BT ;PUT TWO BYTES IN STREAM INDICATING NO NUMBER
RET
XMOVEI P1,NX.VAL+NMXVAR ;POINT TO THE WHERE THE NODE STRING IS
CALL PUTSTR ;COPY THE STRING TO THE USER
RET
SOSLE P2 ;Decrement count of Circuits and skip if done
AOJA NT,NMXLN5 ;Increment Buffer pointer and do next Node
NMXLN6: LOAD T1,NFBUF,+NFWBLK ;Get the Buffer Address
CALL DNFWDS ;Return the block
SETZRO NFBUF,+NFWBLK ;Get rid of the address
SETZRO NFBFF,+NFWBLK ;and the flag
RETSKP ;return success
;Ask Routing Layer for ACTIVE or ADJACENT NODES.
NMXLAD:
NMXLAC: SAVEAC <P1,P2>
MOVX T1,NDBLEN ;Length of a Node Bffer
CALL DNGWZP ;Get a Zeroed Buffer (Low Priority)
JRST NTERES ;Resource Error
STOR T1,NFBUF,+NFWBLK ;Put it into the arg block
SETONE NFBFF,+NFWBLK ;Tell the layers we are giving them a buffer
MOVX T1,NDBLEN ;Get the buffer length
STOR T1,NFBLN,+NFWBLK ;So the layer knows how long it is.
MOVX T1,NF.RET ;Get the function code
XMOVEI T2,NFWBLK ;and the Arg Block address
CALL RTRNMX ;Ask Session Control for Known Nodes
IFNSK.
SKIPE T1 ;Is there 'error' return zero??
JRST NTEERR ;and go report the error
JRST NMXLA2 ;Return OK, No Data....
ENDIF.
LOAD P1,NFBUF,+NFWBLK ;Get the buffer address
LOAD P2,NFBLN,+NFWBLK ;And the number of node numbers written
JUMPE P2,NMXLA2 ;Jump if the count is zero
NMXLA1: MOVE T1,(P1) ;Get a node number
CALL PUT2BT
RET
SETZ T1,
CALL PUTBYT
RET
AOJ P1,
SOJG P2,NMXLA1
NMXLA2: LOAD T1,NFBUF,+NFWBLK ;Get the Counter Block
CALL DNFWDS ;Free up memory
SETZRO NFBUF,+NFWBLK ;Get rid of the address
SETZRO NFBFF,+NFWBLK ;and the flag
RETSKP ;return success
SUBTTL Functions -- .NTRET -- List circuit and line names
;NMXLCK - Return a list of line/circuit names
;Call
; NMXVAR/ NX block
; P1/ Entity Type (LINE or CIRCUIT)
;Return
; RET ;ON ERROR, NXERR,+NMXVAR CONTAINING ERROR CODE
; RETSKP ;WITH LIST OF NAMES IN USER DATA STRING
NMXLCK:
SAVEAC <P1,P2,NT>
STOR P1,NFETY,+NFWBLK ;Put entity Type into NFWBLK
LOAD T1,NXSEL,+NMXVAR ;Get the Selector
STOR T1,NFSEL,+NFWBLK ;Copy it into NFWBLK
MOVX T1,CIRBLK ;Get the size of a return-circuits block
STOR T1,NFBLN,+NFWBLK ;Copy it into NFWBLK
CALL DNGWDS ;Get buffer of that length
ERRRET NTERES ;Resource Error
STOR T1,NFBUF,+NFWBLK ;Put Buffer Address into NFWBLK
SETONE NFBFF,+NFWBLK ;Flag that we sre sending a buffer to the layer
MOVX T1,NF.RET ;Set up the function code
XMOVEI T2,NFWBLK ;Get the buffer address into T2
CAXE P1,.NTLIN ;Is the Entity Type a LINE??
IFSKP.
CALL DNDNMX ;Go ask DNADLL for the circuit ids
IFNSK.
SKIPE T1 ;Is there 'error' return zero??
JRST NTEERR ;No. Report error and deallo buffer if there
JRST NMXLC5 ;No data returned, but no error...
ENDIF.
ELSE.
CALL RTRNMX ;Go ask Router for the circuit ids
IFNSK.
SKIPE T1 ;Is there 'error' return zero??
JRST NTEERR ;No. Report error and deallo buffer if there
JRST NMXLC5 ;No data returned, but no error...
ENDIF.
ENDIF.
LOAD NT,NFBUF,+NFWBLK ;Get back the buffer address
LOAD P2,NFBLN,+NFWBLK ;and the number of words returned
JUMPLE P2,NMXLC5 ;If none (or less than none), do nothing.
NMXLC4: MOVE T1,(NT) ;Get the Circuit Id
MOVE T2,[POINT 8,NX.VAL+NMXVAR] ;DATA STORAGE AREA
CALL NMXC2N ;CONVERT CIRCUIT-ID TO NAME
RET ;error
XMOVEI P1,NX.VAL+NMXVAR ;POINT TO THE CIRCUIT NAME STRINGID
CALL PUTSTR ;PUT THIS STRING IN THE USER'S BUFFER
RET ;error
SOSLE P2 ;Decrement count of Circuits and skip if done
AOJA NT,NMXLC4 ;Increment Buffer pointer and do next circuit
NMXLC5: LOAD T1,NFBUF,+NFWBLK ;Get the Buffer Address
CALL DNFWDS ;Return the block
SETZRO NFBUF,+NFWBLK ;Get rid of the address
SETZRO NFBFF,+NFWBLK ;and the flag
RETSKP ;return success
SUBTTL Entities -- Convert entity names to entity ids
;Called from NMXDIS
ENTCVT: SETZRO NXNTY,+NMXVAR ;NO NODE AS OF YET
SETZRO NXLTY,+NMXVAR ;NO LINE AS OF YET
CALLRET @.+1-.NTNOD(P1)
IFIW <NODCVT&777777> ;CONVERT NODE TYPE
IFIW <LINCVT&777777> ;LINE TYPE
IFIW <NTEURC&777777> ;LOGGING. PUNT, WE DON'T DO THESE
IFIW <CIRCVT&777777> ;SAME AS LINE
IFIW <NTEURC&777777> ;MODULE - ILLEGAL
IFIW <NTEURC&777777> ;ILLEGAL.
;Called from ENTCVT
NODCVT:
SAVEAC <P1> ;NEED FOR TEMP BYTE STORAGE
CALL GETEBY ;GET ENTITY STRING BYTE
RET
MOVE P1,T1 ;SAVE THE BYTE FOR A WHILE
CALL GETEBY ;GET ANOTHER BYTE
RET
ASH T1,^D8 ;SHIFT HIGH-ORDER BYTE OVER
IOR P1,T1 ;INCLUDE LOW ORDER BYTE
JUMPN P1,NODCVX ;IF WE HAVE AN ADDRESS, WE ARE OK
CALL GETSTI ;NO ADDRESS, I MUST HAVE A NAME
RET
CALL NMXN2A ;CONVERT THE NAME TO AN ADDRESS.
JRST NODCV2 ;NO SUCH NAME, MUST BE LOOPBACK
MOVE P1,T1 ;Need the address in P1 now.
JRST NODCV0
NODCVX: MOVE T1,P1 ;Get the node number back
ASH T1,-<^D10> ;Get just the AREA Number
JUMPN T1,NODCV0 ;Jump if AREA is non-zero
CALL LOCARE ;Get the Local Area Number
RET
ASH T1,^D10 ;Shift it over to the right position
IOR P1,T1 ;And or it into the node number
NODCV0: STOR P1,NXNUM,+NMXVAR ;SAVE IN ARGUMENT BLOCK
CALL LOCNID ;Get our Node address, returned in T1
RET ;Error, give up...
LOAD T2,NXNUM,+NMXVAR ;Get back the address we are working on
CAME T2,T1 ;IS THIS US?
JRST NODCV1 ;NOPE
MOVX T1,NX.EXN ;THIS IS THE EXECUTOR NODE
STOR T1,NXNTY,+NMXVAR ;DECLARE TYPE OF NODE
RETSKP ;WE'RE DONE, RETURN
NODCV1: MOVX T1,NX.REN ;THIS IS A REMOTE NODE
STOR T1,NXNTY,+NMXVAR ;DECLARE THAT THIS IS A NODE, AND WHAT TYPE
RETSKP
;Come here only for loop nodes after a fail return from NMXN2A. The latter
; routine will have written an error code into NXERR that needs to be cleared.
NODCV2: SETZRO NXERR,+NMXVAR ;Clear error code from NMXN2A
LOAD T2,NXFNC,+NMXVAR ;GET THE FUNCTION CODE WE ARE TO DO
CAXE T2,.NTSET ;Is this a set?
IFNSK.
MOVX T1,.NTNOD ;Get the Node Entity type code
STOR T1,NFETY,+NFWBLK ;Put it into the Arg block
MOVX T1,NF.CKL ;Check Loopback Node function
XMOVEI T2,NFWBLK ;Get the Argument Block
CALL SCLNMX ;Go ask Session Control if Loopback Node Exists
JRST NTEERR ;No it doesn't, go handle error
ENDIF.
LOAD T1,NFEID,+NFWBLK ;Get the Node Name back from the Block
STOR T1,NXNUM,+NMXVAR ;SAVE THE NODNAME IN NXNUM
MOVX T1,NX.LPN ;THIS IS A LOOPBACK NODE
STOR T1,NXNTY,+NMXVAR ;SAVE THE NODE TYPE
RETSKP
;Called from ENTCVT
LINCVT:
CALL GETSTI ;COPY MULTIPLE BYTES (INTERNAL LIMIT 16)
RET ;error...
MOVE T1,[POINT 8,NX.VAL+NMXVAR] ;BYTE POINTER TO LINE NAME WE COPIED
CALL NMXN2C ;CONVERT NAME TO LINE-ID
RET ; error, pass the code back
SETONE LILXC,+T1 ;Flag that it is a Line Id (not circuit)
STOR T1,NXNUM,+NMXVAR ;SAVE AWAY LINE ID
LOAD T2,LIDEV,+T1 ;Get the Device Type Back
STOR T2,NXLTY,+NMXVAR ;AND INTO THE NMX BLOCK
STOR T1,NFEID,+NFWBLK ;Put the Line Id into argument block
LOAD T1,NXENT,+NMXVAR ;Get the entity type
STOR T1,NFETY,+NFWBLK ;Store it in Arg block
MOVX T1,NF.CET ;Check Entity Function code into T1
XMOVEI T2,NFWBLK ;And the Argument Block address into T2
CALL DNDNMX ;Have the Data Link Layer Verify Line Id
JRST NTEERR ;Save the error code
RETSKP ;Return success if not
;Called from ENTCVT
CIRCVT:
CALL GETSTI ;COPY MULTIPLE BYTES (INTERNAL LIMIT 16)
RET ;error...
MOVE T1,[POINT 8,NX.VAL+NMXVAR] ;BYTE POINTER TO LINE NAME WE COPIED
CALL NMXN2C ;CONVERT NAME TO LINE-ID
RET ; error, pass the code back
SETZRO LILXC,+T1 ;Flag that it is a Circuit Id (not Line)
STOR T1,NXNUM,+NMXVAR ;SAVE AWAY LINE ID
LOAD T2,LIDEV,+T1 ;Get the Device Type Back
STOR T2,NXLTY,+NMXVAR ;AND INTO THE NMX BLOCK
STOR T1,NFEID,+NFWBLK ;Put the Line Id into argument block
LOAD T1,NXENT,+NMXVAR ;Get the entity type
STOR T1,NFETY,+NFWBLK ;Store it in Arg block
MOVX T1,NF.CET ;Check Entity Function code into T1
XMOVEI T2,NFWBLK ;And the Argument Block address into T2
CALL DNDNMX ;Have the Data Link Layer Verify Line Id
JRST NTEERR ;Save the error code
RETSKP ;Return Success
SUBTTL Entities -- Circuit ID to name conversion
;NMXC2N - Convert circuit ID to name
;Call
; T1/ Circuit ID
; T2/ Local byte pointer to use in returning bytes
; Area must be large enough to receive 16 bytes.
;Return
; +1/ No such circuit ID
; +2/ Data area has stringid for circuit name
;
NMXC2N:
SAVEAC <P1,P2> ;SOME SCRATCH ACS
DMOVE P1,T1 ;SAVE BOTH ARGUMENTS FOR THIS CALL
SETZ T6, ;NUMBER OF BYTES DEPOSITED
IDPB T6,P2 ;FIRST BYTE IS COUNT OF BYTES FOLLOWING
MOVE T5,P2 ;SAVE BYTE POINTER TO COUNT BYTE
LOAD T1,LIDEV,+P1 ;GET THE TYPE OF DEVICE
CAXLE T1,LD.MAX ;IN RANGE OF DEVICES WE KNOW?
BUG.(CHK,NTMKOR,NTMAN,SOFT,<Controller out of range in Circuit-id>,,<
Cause: The controller field in a line-id is out of range. The value
LD.MAX defines the number of controllers known by D36PAR, and
thus by NTMAN. The most likely cause of this bug is a trashed
AC.
Note:
A controller is any device driver to which a router interfaces.
It is currently used to define the name of a Circuit/Line,
under the assumption that each Kontroller will control only
a single line type.
Action: If this BUG persists, make it dumpable and submit an SPR with the
dump and a copy of MONITR.EXE. If possible, include any known
method for reproducing the problem and/or the state of the system
at the time the BUG was observed.
>,RTN)
;WE KNOW THAT ALL DEVICE NAMES ARE AT MOST 4 BYTES LONG, AND THUS FIT IN A WORD
HRLI T2,(POINT 7,) ;WE STORE THE DATA IN 7 BIT BYTES INTERNALLY
HRRI T2,KONNAM(T1) ;GET POINTER TO DEVICE NAME
NMXC20: ILDB T1,T2 ;GET A BYTE FROM THE DEVICE NAME
JUMPE T1,NMXC21 ;END OF STRING, FALL THROUGH
IDPB T1,P2 ;SAVE IT IN OUR DESTINATION DATA STRING
AOJA T6,NMXC20 ;INCREMENT NUMBER OF BYTES DEPOSITED
NMXC21: MOVEI T1,"-" ;SEPERATOR
IDPB T1,P2 ;STORE IT
AOJ T6, ;COUNT UP CHARACTER
LOAD T1,LIKON,+P1 ;GET THE KONTROLLER NUMBER
PUSHJ P,NMXC28 ;OUTPUT NUMBER IN DECIMAL
MOVEI T1,"-"
IDPB T1,P2 ;STORE THE SEPARATOR
AOJ T6, ;INCREMENT NUMBER OF BYTES
LOAD T1,LIUNI,+P1 ;GET THE UNIT NUMBER
PUSHJ P,NMXC28 ;OUTPUT THE NUMBER IN DECIMAL
JN LILXC,+P1,NMXC22 ;Jump if we are not dealing with a CIRCUIT
LOAD T1,LIDEV,+P1 ;GET THE DEVICE TYPE
CAXE T1,LD.CIP ;IS IT A CI?
JRST NMXC22 ;NO, WE ARE DONE
MOVEI T1,"." ;OUTPUT SEPERATOR
IDPB T1,P2 ;STORE IT
AOJ T6, ;AND INCREMENT COUNT
LOAD T1,LIDRP,+P1 ;GET THE DROP NUMBER (PORT ON THE CI)
PUSHJ P,NMXC28 ;AND OUTPUT IT IN DECIMAL
NMXC22: CAIL T6,^D16 ;DID WE DO THIS IN 16 BYTES?
BUG.(HLT,NTMCNO,NTMAN,SOFT,<Circuit name overrun>,,<
Cause: More than 16 bytes of data have been returned into a 16 byte field.
The data beyond the buffer has been trashed.
Action: Examine the algorithm above to determine why more bytes than
expected were returned. Fix the above code to check for overrun
while it is producing the bytes, so that this halt does not occur.
>)
DPB T6,T5 ;STORE NUMBER OF BYTES WE GAVE
RETSKP
NMXC28: IDIVI T1,^D10 ;SEPERATE INTO DIGITS
JUMPE T1,NMXC29 ;COMPLETED THE SEPARATION, START OUTPUTTING.
PUSH P,T2 ;SAVE DIGIT ON STACK
PUSHJ P,NMXC28 ;RECURSE
POP P,T2 ;GET BACK DIGIT
NMXC29: ADDI T2,"0" ;MAKE IT INTO AN ASCII DIGIT
IDPB T2,P2 ;DEPOSIT INTO STRING
AOJ T6, ;INCREMENT NUMBER OF BYTES GIVEN
RET ;RETURN
SUBTTL Entities -- Convert name to Circuit-ID.
;NMXN2C - Convert a string to line id
;Call
; T1/ Byte pointer to name
;Return
; +1, No such circuit
; +2, t1/ Circuit ID
NMXN2C:
SAVEAC <P1,P2> ;WORK REGISTERS
MOVE P1,T1 ;SAVE BYTE POINTER TO NAME
MOVE T6,[POINT 7,T2] ;BYTE POINTER TO COPY NAME
MOVEI T5,5 ;MAX OF 5 BYTES (ONE WORD)
ILDB T4,P1 ;GET NUMBER OF BYTES IN THIS STRINGID
SETZB T2,P2 ;CLEAR OUT DESTINATION, AND CIRCUIT ID
NMXN20: SOJL T4,NTEINI ;TERMINATED TOO SOON. INVALID
ILDB T1,P1 ;GET A BYTE
CAIL T1,140 ;IS IT LOWER CASE?
SUBI T1,40 ;YES, MAKE IT UPPER CASE
CAIN T1,"-" ;DID IT INCLUDE THE DASH?
JRST NMXN21 ;YES, STOP HERE.
IDPB T1,T6 ;SAVE IN COPYING STRING
SOJG T5,NMXN20 ;GET ANOTHER BYTE
ERRRET NTEINI ;ILLEGAL NAME, GIVE UNRECOGNIZED COMPONENT
NMXN21: MOVEI T1,LD.MAX ;MAXIMUM KONTROLLER DEVICE NUMBER
NMXN22: CAMN T2,KONNAM(T1) ;IS THIS THE CONTROLLER WE CARE ABOUT?
JRST NMXN23 ;YES, EXIT
SOJGE T1,NMXN22 ;TRY FOR NEXT KONTROLLER DEVICE NUMBER
ERRRET NTEINI ;ILLEGAL NAME
NMXN23: STOR T1,LIDEV,+P2 ;STORE IN CIRCUIT ID WE ARE BUILDING
CALL NMXN28 ;GET A NUMBER FROM THE STRING
STOR T1,LIKON,+P2 ;STORE AS KONTROLLER NUMBER IN CIRCUIT ID
CALL NMXN28 ;GET THE NEXT NUMBER FROM THE STRING
STOR T1,LIUNI,+P2 ;SAVE UNIT NUMBER
CALL NMXN28 ;GET NEXT NUMBER (IF ANY)
STOR T1,LIDRP,+P2 ;SAVE AS DROP NUMBER (PORT ON CI)
MOVE T1,P2 ;GET THE CIRCUIT ID WE JUST BUILT
RETSKP ;RETURN SUCCESS.
NMXN28: SETZ T1, ;CLEAR DESTINATION NUMBER
NMXN29: SOJL T4,RTN ;NO MORE BYTES, RETURN
ILDB T2,P1 ;GET NEXT DIGIT
CAIL T2,"0" ;RANGE
CAILE T2,"9" ; CHECK
RET ;NOT A DIGIT
SUBI T2,"0" ;CONVERT TO NUMBER
IMULI T1,^D10 ;SHIFT ORIGINAL NUMBER
ADD T1,T2 ;ADD IN CURRENT DIGIT
JRST NMXN29 ;AND GET ANOTHER DIGIT
SUBTTL Layers -- Main interface to layer levels
;NMXLAY - Call layer-level routine, to get/set value.
;CALL
; T1/ NMX Function Code
; T2/ NFWBLK - NMX Interface argument block
; T3/ Routine Index value from Parameter Table Entry (NTROU)
; NMXVAR/ NX block
; NT/ Pointer to STENT part of NT block
;Return
; RET ;on error, NXERR has code
; RETSKP ;
;
NMXLAY:
SETZRO NXNIL,+NMXVAR ;CLEAR THE "I DIDN'T DO ANYTHING" FLAG
CAXGE T3,NMXMAX ;RANGE CHECK
CAXGE T3,NMXMIN
BUG.(CHK,NTMDVI,NTMAN,SOFT,<NMXDSP value illegal>,,<
Cause: There is a call to a "layer" to obtain or set a value for
an item. The routine value in the descriptor block pointed
to by NT is illegal.
Action: If this BUG persists, make it dumpable and submit an SPR with the
dump and a copy of MONITR.EXE. If possible, include any known
method for reproducing the problem and/or the state of the system
at the time the BUG was observed. Analyze the dump and examine
the data structure pointed to by NT. In all probability this is
caused by a trashed NT, since the descriptor block generation macros
are supposed to range check this value. A "layer" is any routine
described at NMXDSP.
>,NTEMPE)
CALLRET @NMXDSP(T3) ;CALL LAYER-LEVEL ROUTINE
SUBTTL Events -- Interface layer / NMX (NMXEVT)
;NMXEVT is the interface routine between a layer and the event logger.
;
;Context: interrupt or scheduler level
XRESCD
;
;Arguments:
; T1/ function code
; T2/ function dependent argument
;
;Returns (depends on function):
; +1 indicates that the function could not be successfully completed
; +2 success
XRESCD
NMXEVT:
;Verify the function code
CAIL T1,EV.GEC ;Function code within range?
CAILE T1,EV.SIG
BUG.(CHK,NTMEFO,NTMAN,SOFT,<Event function out of range>,,<
Cause: The event function supplied by a DECnet layer to NMXEVT was
out of range.
Action: If this BUG persists, make it dumpable and submit an SPR with the
dump and a copy of MONITR.EXE. If possible, include any known
method for reproducing the problem and/or the state of the system
at the time the BUG was observed. Analyze the dump and make callers
of NMXEVT supply the correct function code.
>,RTN)
;Dispatch to appropriate routine
CALLRET <-EV.GEC>+@[ ;Dispatch according to function code
IFIW <EVGEC&777777> ;Get EC block
IFIW <EVREC&777777> ;Release EC block
IFIW <EVFIL&777777> ;Filter an event
IFIW <EVLOG&777777> ;Log an event
IFIW <EVSIG&777777>](T1) ;Log a signal
SUBTTL Events -- NMXEVT -- EVGEC (Get EC block)
;EVGEC allocates an EC block
;
;Input: none
;Return: +1 if no memory, no EC block allocated
; +2 with T1/ address of EC block
;Resident...
EVGEC: MOVX T1,EC.LEN ;Length of EC block
CALLRET DNGWDZ ;Get chunk of zero words and propagate return
; from memory allocator
SUBTTL Events -- NMXEVT -- EVREC (Release Ec block)
;EVREC releases an EC block
;
;Input: T2/ address of EC block
;Returns: +2 always
;Resident...
EVREC:
;Unless ECCNT is non-zero (i.e. there is a NE block on queue pointing back
; to this EC block) it is OK to release the memory. In the case of ECCNT
; non-zero, the ECDEL bit is set to indicate to NTEVQ that the EC block
; should be deallocated when ECCNT goes to zero.
MOVE T1,T2 ;T1 := ^EC
OPSTR <SKIPG>,ECCNT,(T1) ;ECCNT greater than zero?
IFSKP. ; -yes
SETONE ECDEL,(T1) ; Set ECDEL flag
ELSE. ; -no, all OK
CALL DNFWDS ; Deallocate memory
ENDIF.
RETSKP
SUBTTL Events -- NMXEVT -- EVFIL (Filter an event)
;EVFIL filters an event
;
;Input: T2/ event code in the following format:
; FIELD CCL,13 Event class
; FIELD CTY,5 Event type
; FILLER 18
;
;Returns: +1 Event should be thrown away
; +2 Event should be logged
;Resident...
EVFIL: SAVEAC <P1>
MOVE P1,T2 ;P1 := event class and type
LOAD T1,FACCL,+P1 ;Get event class
CALL NTFFIL ;Find filter
RET ; -not there, throw away event
LOAD T2,FACTY,+P1 ;Get event type
MOVX T3,1 ;Load a 1 into test word
LSH T3,(T2) ; and shift into position
TDNN T3,NMXFIL(T1) ;Is bit set in filter mask?
RET ; -no, throw away
RETSKP ;-yes, keep event
;NTFFIL - find index of event class in filter table (NMXFIL)
;
;Call with: T1/ event class
;Returns: +1/ did not find event class in table
; +2/ T1/ index of filter in table
;
NTFFIL: ;Ac usage: T1/ event class, T2/ moving index
SETZ T2, ;Start at index 0 in table
DO. ;Loop over all event classes
SKIPGE NMXFIL(T2) ; At end of list?
RET ; -yes, return 'not found'
HLRZ T3,NMXFIL(T2) ; Get low bound
HRRZ T4,NMXFIL(T2) ; and high bound
CAML T1,T3 ; Is event class in interval?
CAMLE T1,T4
IFNSK. ; -no, step to next event class interval
SUB T4,T3 ; Find out # of entries to step over
ADDI T4,2 ; Dont forget the interval word
ADD T2,T4 ; Add to current index
LOOP. ; and loop back
ELSE. ; -yes, in interval
MOVE T4,T1 ; Calculate matching index
SUB T4,T3
AOJ T4,
ADD T4,T2
MOVE T1,T4 ; and put it in T1
EXIT. ; Exit DO loop to exit routine
ENDIF.
ENDDO.
RETSKP ; Return 'found'
SUBTTL Events -- NMXEVT -- EVLOG (Log an event)
;EVLOG logs an event
;
;Input: T2/ NE block
; Note: The NE block must contain a valid pointer to the EC block
;
;Returns: +2 always
;Resident...
EVLOG: SAVEAC <P1,P2> ;Ac usage: P1/ NE block, P2/ EC block
MOVE P1,T2 ;P1 := ^NE
LOAD P2,NEECP,(P1) ;P2 := ^EC
CALL DNGTIM ;Get system time
STOR T1,NETIM,(P1) ;Store for future conversion to julian time
D36OFF ;Turn off interrupts
CALL EVLOG1 ;Call coroutine that does the work
IFNSK. ; No-skip means event lost; deallocate it
D36ON ; First turn on interrupts
MOVE T1,P1 ; Get ^NE
CALL EVRNE ; Call EVRNE to release NE block
RETSKP ; Always success return
ENDIF.
D36ON ;Skip means NE block now on queue
CALL PSIDVT ;Give a PSI if someone waiting
RETSKP
;EVLOG1 - EVLOG worker routine
;
;Called with D36OFF
;
;Input:
; P1/ ^NE block
; P2/ ^EC block
;
;Output:
; +1 lost event, deallocate it
; +2 do not deallocate event
;
;Local AC use:
; T4/ count of entries on queue
EVLOG1:
; if ECLOS gtr 0 then lose_event
JN ECLOS,(P2),EVLOGL ;If ECLOS non-zero, lose this one too
; if NMXECN = NMXELN then lose_event
LOAD T4,QHCNT,+NMXEVQ ;Get current # of entries in queue
CAIL T4,NMXELN ;Compare with max length of queue
JRST EVLOGL ;Lose event
; if ECCNT geq ECMAX
LOAD T1,ECCNT,(P2)
OPSTR <CAMGE T1,>,ECMAX,(P2)
IFSKP. ; ... then
SKIPE NMXELO ; if NMXELO = true
JRST EVLOGL ; then lose event
CALL EVLOGM ; else lose event and make lost event
ELSE. ; ... else
CAIE T4,<NMXELN-1> ; if queue length = queue max - 1
IFSKP. ; then
SKIPE NMXELO ; and NMXELO is false
ANSKP.
CALL EVLOGM ; lose event and make lost
ENDIF.
ENDIF.
;Queue NE block
ENDQUE P1,NMXEVQ,NE.NXT,T1
;Increment ECCNT
INCR ECCNT,(P2)
;Return with queued block
RETSKP
;EVLOG support routines
;
;Resident...
;EVLOGL - called to lose event and return
EVLOGL: INCR ECLOS,(P2) ;Increment # of lost events
RET ;No-skip to deallocate NE block
;EVLOGM - called to remake event to "lost event"
; The event will then be queued as an "ordinary event"
EVLOGM: INCR ECLOS,(P2) ;Increment # of lost events
SETZRO NECCL,(P1) ;Event class := 0
SETZRO NECTY,(P1) ;Event type := 0
SETONE NEETP,(P1) ;Entity type := no entity
SETZRO NEDLN,(P1) ;Data length := 0
SETOM NMXELO ;And now is NMXELO true
RET
;EVRNE - release NE block. Called on "lost event" or when event is copied
; to user (NTEVQ).
;
; T1/ ^NE block
;Resident...
EVRNE: LOAD T2,NECBK,(T1) ;Get callback address
SKIPN T2 ;Was one supplied?
IFNSK. ; -no, use default
CALLRET DNFWDS ; DECnet deallocator
ELSE.
CALL (T2) ; -yes, call users routine
JFCL ; Ignore no-skip
ENDIF.
RET ;Return
SUBTTL Events -- NMXEVT -- EVSIG (Log a signal)
;EVSIG signals an event
;
;Input: T2/ NE block
;
;Returns: +2 always
;Resident...
EVSIG: SAVEAC <P1,P2> ;Ac usage: P1/ NE block, P2/ EC block
MOVE P1,T2 ;P1 := ^NE
LOAD P2,NEECP,(P1) ;P2 := ^EC
CALL DNGTIM ;Get system time
STOR T1,NETIM,(P1) ;Store for future conversion to julian time
;Turn off interrupts
D36OFF
;Verify that there is room in the signal queue
LOAD T1,QHCNT,+NMXSIQ ;Get current count
CAIL T1,NMXSLN ; and compare with max allowed
BUG.(CHK,NTMSQF,NTMAN,SOFT,<Signal queue full>,,<
Cause: The signal queue was full when a new signal was logged.
This might be caused by a malfunctioning NMLT20 that does not
read the signals from the signal queue, or it may be caused by
a DECnet device driver going bad. A signal is used to tell
NMLT20 that a device needs attention/reload.
Action: Restart NMLT20, or turn off malfunctioning DECnet device.
If necessary, reload any devices by hand. Note that this has
been known to occur at startup. If this is the case, simply
increase the size of the signal queue. You must have sources
in order to do this, however, as NMXSLN resides in D36PAR.MAC.
>,EVSIG2)
;If no BUGCHK, come here and insert event into signal queue
ENDQUE P1,NMXSIQ,NE.NXT,T1
EVSIG1: D36ON ;Turn on interrupts
CALL PSIDVT ;Give a PSI if someone waiting
RETSKP
;Come here if signal queue is full
EVSIG2: D36ON ;Allow interrupts again
MOVE T1,P1 ;Get pointer to NE block
CALLRET DNFWDS ;Deallocate and return
;End of resident code
XSWAPCD
IFN FTDEBUG <
SUBTTL Events -- .NTTEV function (Test event logger)
;Called from NMXDIS
;The .NTTEV function tests the event logger and uses the ET structure
NTTEV: SAVEAC <P1,P2,MB,MS>
; P1/ ^NE block, P2/ ^EC block, MS/ ^ET block, MB/ count of events to do
;Get ET block
MOVX T1,ET.LEN
CALL DNGWDZ
ERRRET NTERES
MOVE MS,T1
;Copy from user argument block to our ET block
;
;T1/ ^user argument
;T2/ rolling index
UMOVE T1,1
UMOVE T1,.NTSEL(T1)
SETZ T2,
DO.
CAIL T2,ET.LEN ;Through copying?
EXIT. ; -yes,exit
MOVE T3,T1
ADD T3,T2
UMOVE T4,(T3) ;Get user word
ERJMP [ MOVE T1,MS ;On illegal read, return MS block
CALL DNFWDS
ERRRET NTEADC ;Give "address check"
]
MOVE T3,MS
ADD T3,T2
MOVEM T4,(T3) ;Store in ET block
AOJ T2,
LOOP.
ENDDO.
LOAD MB,ETCNT,(MS) ;Get count of events to do
;Get EC block
MOVX T1,EV.GEC ;Get EC block
CALL NMXEVT
IFNSK.
MOVE T1,MS
CALL DNFWDS
ERRRET NTERES
ENDIF.
MOVE P2,T1
MOVX T1,2 ;Allow 2 events on queue
STOR T1,ECMAX,(P2)
;Get NE block
NEGET: MOVX T1,NE.LEN
ADDI T1,<44/4> ;Add data string
CALL DNGWDZ
IFNSK.
MOVX T1,EV.REC ;Release EC block
MOVE T2,P2
CALL NMXEVT
JFCL
MOVE T1,MS
CALL DNFWDS
ERRRET NTERES
ENDIF.
MOVE P1,T1 ;P1 := ^NE
;At this point all blocks are allocated, and the user arguments have been
; copied to our ET block
;Copy data to NE block
STOR P2,NEECP,(P1) ;Store EC pointer
LOAD T1,ETCCL,(MS) ;Get event class
STOR T1,NECCL,(P1)
LOAD T1,ETCTY,(MS) ;Get event type
STOR T1,NECTY,(P1)
LOAD T1,NXENT,+NMXVAR ;Get entity type
STOR T1,NEETP,(P1)
LOAD T1,NXNUM,+NMXVAR ;Get entity ID
STOR T1,NEEID,(P1)
LOAD T1,ETDLN,(MS) ;Get data length
STOR T1,NEDLN,(P1)
XMOVEI T1,NE.DAT(P1) ;Get address of data string
AOJ T1,
STOR T1,NEDAT,(P1)
;Copy the string also
LOAD T1,ETDLN,(MS) ;Get string length
MOVSI T2,(POINT 8,0) ;Byte pointer
TDO T2,[1B12] ;Make it global...
XMOVEI T3,ET.DAT(MS) ;Get source address
DMOVE T4,T1 ;Duplicate T1-T2
LOAD T6,NEDAT,(P1) ;Get destination address
EXTEND T1,[MOVSLJ] ;"Move string left justified"
JFCL ;Ignore error
;Now log or signal the event
MOVX T1,EV.SIG ;Assume signal
OPSTR <SKIPE>,ETSIG,(MS)
IFSKP. ;No, it was "ordinary" event
SETZ T2, ;Clear word to receive argument
LOAD T1,NECCL,(P1) ;Get event class
STOR T1,FACCL,+T2
LOAD T1,NECTY,(P1) ;Get event type
STOR T1,FACTY,+T2
MOVX T1,EV.FIL ;Filter the event
CALL NMXEVT
IFNSK. ;Throw away this event
MOVE T1,P1
CALL DNFWDS ;Release NE block
ELSE.
MOVX T1,EV.LOG ;Log event
MOVE T2,P1
CALL NMXEVT
JFCL
ENDIF.
ELSE.
MOVE T2,P1
CALL NMXEVT
JFCL
ENDIF.
;Check count
SOJG MB,NEGET ;More to do?
;No, deallocate EC and ET blocks
MOVX T1,EV.REC
MOVE T2,P2
CALL NMXEVT
JFCL
;And ET block too
MOVE T1,MS
CALL DNFWDS
;Everything done, return success
RETSKP
>
SUBTTL Events -- .NTSLM function (Set global logging mask)
;Called from NMXDIS
;The .NTSLM function sets/changes the global logging masks in NTMAN.
;The event class to set is in word .NTSEL, and the new filter in word .NTQUA.
NTSLM:
IFN FTOPS10, < ;Not in TOPS-10
ERRRET NTEUFO
>
IFN FTOPS20, <
SAVEAC <P1>
UMOVE P1,1 ;P1 := user ^argblk
UMOVE T1,.NTSEL(P1) ;Get event class
CALL NTFFIL ;Find the filter
ERRRET NTEPNA ;Say 'parameter not applicable'
;Index of matching entry is now in T1
UMOVE T2,.NTQUA(P1) ;Get event filter
TXZ T2,17B3 ;Clear bits 0-3 (BLISS bits 33-36)
MOVEM T2,NMXFIL(T1) ;Store new filter
RETSKP ;Give success return
>
SUBTTL Events -- .NTPSI function (Set event PSI channel)
;Called from NMXDIS
;The .NTPSI sets the PSI channel for "events available" interrupts. TOPS-10
; uses another mechanism to set event interrupts, so the following routine is
; Tops-20 only.
;
; The PSI channel is in word .NTSEL
NTPSI:
IFN FTOPS10,<ERRRET NTEUFO> ;NOT IN TOPS10
IFN FTOPS20,<
SKIPN T1,EVRFRK ;SOMEONE ALREADY DOING THIS?
IFSKP.
HRRZS T1 ;YES, GET HIS ID
CAME T1,FORKX ;IS HE RESETTING?
S1XCT <ITERR (NTMX2)>;Return "Event facility already in use"
ENDIF.
LOAD T1,NXSEL,+NMXVAR ;Get users PSI channel from .NTSEL
CAME T1,[-1] ;DOES HE STILL WANT TO BE NOTIFIED?
IFSKP.
SETZM EVRFRK ;NO, NO MORE EVENT READER
ELSE.
CAIL T1,0 ;YES, CHECK FOR
CAILE T1,^D36 ; LEGAL PSI CHANNEL
ERRRET NTEMPE ; -not legal, give 'management program error'
AOS T1 ;FIX IT FOR INTERNAL USE
HRLM T1,EVRFRK ;SET IT UP
MOVE T1,FORKX ;GET USER
HRRM T1,EVRFRK ;SET IT UP
SKIPE NMXEVQ ;IS THERE ANYTHING IN THE QUEUE ?
CALL NMLEVT ;YES. GIVE INTERRUPT.
ENDIF.
RETSKP
;KILL THE EVENT READER (CALLED FROM .RESET AND KSELF)
;RETURNS: +1
;Resident ? (To be checked in future/GL)
XRESCD
XRENT EVRKIL
HRRZ T1,EVRFRK ;GET THE EVENT LOGGER
CAMN T1,FORKX ;IS IT US?
SETZM EVRFRK ;YES, NO MORE EVENT READER
RET ;NO, NOTHING TO DO
;GIVE THE EVENT READER A PSI
;CALLED FROM LV8CHK
;This must be resident
XRESCD
NMLEVT: SETZM NMLPSI ;CLEAR THE FLAG
HLRZ T1,EVRFRK ;GET PSI CHANNEL
JUMPE T1,RTN ;IF THERE IS ONE.
SOS T1 ;THERE IS. MAKE IT REAL.
HRRZ T2,EVRFRK ;GET EVENT READER FORK
XCALLRET (MSEC1,PSIRQ) ;LET HIM KNOW
;ASSERT EVENT PSI FOR SCHEDULER TO CATCH
;MAY BE CALLED AT ANY LEVEL.
;CALL PSIDVT
;RETURNS +1 ALWAYS
XRESCD ;MUST BE RESIDENT
PSIDVT: SETOM NMLPSI ;SET FLAG FOR SCHEDULER.
RET
;No more resident code
XSWAPCD
>;END IFN FTOPS20
SUBTTL Events -- .NTEVQ function (Pass queued event to user)
;Called from NMXDIS
;Writes next event to user buffer. If there are no events on queue,
; a zero length is indicated to the user.
;Must be resident since D36OFF is done
XRESCD
NTEVQ: SAVEAC <P1,P2> ;Ac usage: P2/ ^NE block
;Turn off interrupts and call routine to get next event.
D36OFF
CALL NTEVQN ;Pull next event off queues
IFNSK. ;No-skip indicates no event on queue
D36ON ; Turn on interrupts
RETSKP ; Do success return, higher layer will write
ENDIF. ; 0 into the "number of bytes returned" field
D36ON ;Turn on interrupts on success return
JRST NTEVQ1 ;Proceed in swappable code
XSWAPCD
;Come here with T1/ ^NE block
NTEVQ1: MOVE P2,T1 ;P2 := ^NE
;Now "build" a NQ block in the users buffer, i.e.
; B:2 event class and type
; 3*B:2 julian day, second and millisecond
; B:2 entity type
; B:n entity ID
; B:m m bytes of event data
;Event class and type
LOAD T1,NECCL,(P2) ;Get event class
ASH T1,6 ;Shift over to make room for type
OPSTR <IOR T1,>,NECTY,(P2) ;Or in event type
CALL PUT2BT ;Put to user
RET ;error...
;Julian day, second and millisecond
LOAD T1,NETIM,(P2) ;Get system time stored
STKVAR <SEC,MSC> ;Two local variables
CALL NMXTIM ;Convert to julian time
MOVEM T2,SEC ;Save julian seconds
MOVEM T3,MSC ;Save julian milliseconds
CALL PUT2BT ;Put julian 1/2day to user
RET ;error...
MOVE T1,SEC
CALL PUT2BT ;Put julian seconds to user
RET ;error...
MOVE T1,MSC
CALL PUT2BT ;Put julian milliseconds to user
RET ;error...
;Now put entity type and entity ID
LOADE T1,NEETP,(P2) ;Get entity type
CALL PUTBYT ;Put to user
RET ;error...
LOADE T1,NEETP,(P2) ;Get entity type again
CAXE T1,.NTNOD ;Is it node?
IFSKP. ; -yes
LOAD T1,NEEID,(P2) ; Get entity ID (node number)
CALL PUT2BT ; Put # in user buffer
RET ;error...
SETZ T1, ; Zero length node name
CALL PUTBYT ; Put length byte to user
RET ;error...
ELSE. ; -no, not node entity
CAXE T1,.NTCKT ; Is it circuit
CAXN T1,.NTLIN ; or a line?
IFNSK. ; -yes, it was
LOAD T1,NEEID,(P2) ; Get entity ID
MOVE T2,[POINT 8,NX.VAL+NMXVAR] ;Where to store circuit/line string
CALL NMXC2N ; Convert id to a name
RET ;error...
XMOVEI P1,NX.VAL+NMXVAR ; Load pointer to string containing name
CALL PUTSTR ; Copy string to user space
RET ;error...
ELSE. ; -not circuit or line ID
AOJ T1, ; Maybe 'NO ENTITY' (elevenish -1)
TRNE T1,<<377_8>+377> ; Is it?
BUG.(CHK,NTMORE,NTMAN,SOFT,<Unrecognized entity type>,,<
Cause: An event was received from a DECnet layer, and the entity type
is not legal.
Action: If this BUG persists, make it dumpable and submit an SPR with the
dump and a copy of MONITR.EXE. If possible, include any known
method for reproducing the problem and/or the state of the system
at the time the BUG was observed. Analyze the dump and find the
routine that logged the event, and change it to a legal entity type.
>,NTEMPE)
ENDIF.
ENDIF.
;Now copy data string to user buffer
SAVEAC <MB>
LOAD NT,NEDLN,(P2) ;Count in NT
LOAD MB,NEDAT,(P2) ;Address of string to MB
MOVE P1,[POINT 8,(MB)] ;Do it this way to get intersection copy
DO.
SOSGE NT ;Any more bytes?
EXIT. ; -no
ILDB T1,P1 ;Get next byte
CALL PUTBYT ; and give it to user
RET ;error...
LOOP.
ENDDO.
;Now the NE block has been copied to the user buffer, deallocate the NE block
; and then return successfully
MOVE T1,P2 ;EVRNE wants pointer in T1
CALL EVRNE
RETSKP
;NTEVQN - extract next event from queue
;
;Called with D36OFF, so must be resident
XRESCD
;
;Returns: +1 No events on queue
; +2 T1/ ^NE block
NTEVQN: SAVEAC <P1,P2> ;P1/ ^NE block, P2/ ^EC block
;Try dequeue an event from the signal queue
DEQUE T1,NMXSIQ,NE.NXT,NTEVQM ;Dequeue into T1
RETSKP ;Success, return
;NTEVQM - try to extract event from the event queue
NTEVQM: DEQUE P1,NMXEVQ,NE.NXT,RTN ;Just return if nothing available
;Come here with P1/ ^NE block
LOAD P2,NEECP,(P1) ;P2 := ^EC
;Is this an events lost?
LOAD T1,NECCL,(P1) ;Get event class
LOAD T2,NECTY,(P1) ; and event type
SKIPN T1 ;Is event class = 0
SKIPE T2 ; and event type = 0
SKIPA ; -no, skip next instruction
SETZM NMXELO ; -yes, flag no "events lost" on queue any more
;Decrement ECCNT by one; and if it went to zero there may be things to do
DECR ECCNT,(P2)
OPSTR <SKIPE>,ECCNT,(P2) ;Did it go to zero?
IFSKP. ; -yes
;Code may go here to generated "events were lost event"
;
SETZRO ECLOS,(P2) ;No more lost events now
;If ECDEL is set, then deallocate the EC block
OPSTR <SKIPN>,ECDEL,(P2) ;Set?
IFSKP. ; -yes
MOVE T2,P2
CALL EVREC
JFCL
ENDIF.
ENDIF.
;Put NE address in T1, and return skip to indicate that there was an event
MOVE T1,P1
RETSKP
;End of resident code
XSWAPCD
SUBTTL User strings -- Write parameter with nice
;NMXWTY - Write a parameter to the user data string, including NICE
; headers such as DATA ID and DATA TYPE
;Call
; NT/ Pointer to STENT part of NT block
; NXVAL,+NMXVAR/ Value obtained from NMXLAY
;
;Return
; RET ;On error, NXERR has error code
; RETSKP ;when done, maybe with stuff in user string
;
NMXWTY:
JN NXNIL,+NMXVAR,RSKP ;If Layer didn't know about him, ignore it.
JE NXWUS,+NMXVAR,RSKP ;IF NOT WRITING TO THE USER, RETURN
SETZ T1, ;START OFF WITH A CLEAN HEADER DUO-BYTE
LOAD T2,NTSEQ,(NT) ;GET SEQUENCE NUMBER OF PARAMETER
IOR T1,T2 ;OR INTO HEADER DUO-BYTE
CALL PUT2BT ;PUT 2 BYTES OF HEADER INTO USER DATA STRING
RET ;error...
NMXWT3: LOAD T1,NTTYP,(NT) ;GET DATA TYPE OF THIS PARAMETER
CAXL T1,NT.FC ;IS IT LESSER THAN SIMPLE CODED?
CAXLE T1,NT.FCN ;OR GREATER THAN ASCII CIRCUIT NAME?
BUG.(CHK,NTMFOR,NTMAN,SOFT,<Format out of range>,,<
Cause: While formatting output for a show, the format block for
this item has been found to have an illegal format type.
Action: If this BUG persists, make it dumpable and submit an SPR with the
dump and a copy of MONITR.EXE. If possible, include any known
method for reproducing the problem and/or the state of the system
at the time the BUG was observed.
>,NTEMPE)
CALLRET @.+1-NT.FC(T1)
IFIW <NMXWCD&777777> ;ORDINARY CODED. HANDLE AS INTEGER
IFIW <RSKP&777777> ;CODED MULTIPLE IS HANDLED AT ANOTHER LEVEL
IFIW <RSKP&777777> ;ASCII IMAGE. HANDLED AT ANOTHER LEVEL
IFIW <NMXWNU&777777> ;DECIMAL UNSIGNED
IFIW <NMXWNU&777777> ;DECIMAL SIGNED.
IFIW <NMXWNU&777777> ;HEXADECIMAL INTEGER.
IFIW <NMXWHI&777777> ;HEX IMAGE. BYTE STRING
IFIW <NMXWNU&777777> ;OCTAL
IFIW <NMXWNM&777777> ;MILLISECONDS
IFIW <NMXWVN&777777> ;VERSION NUMBER
IFIW <NMXWNE&777777> ;NODE ENTITY ID
IFIW <NMXWNN&777777> ;NODE NAME
IFIW <NMXWCN&777777> ;WRITE CIRCUIT NAME
SUBTTL User strings -- Write coded data
;NMXWCD - Write coded info to user data string
;Call
; NT/ Pointer to format block
;Return
; RET ;Error, code is in NXERR
; RETSKP ;data type byte and data are in user string
;
NMXWCD:
SAVEAC <P1,P2> ;GET SOME WORK AREA
LOAD T1,NTLEN,(NT) ;GET SIZE OF FIELD
CAIE T1,1 ;WE ONLY HAVE SINGLE BYTE CODEDS. (**HACK**)
BUG.(CHK,NTMBCF,NTMAN,SOFT,<Bad coded field on output>,,<
Cause: Output for a SHOW is being formatted, and there has been a request
to generate a CODED field of more than one byte. This can't be
done.
Action: If this BUG persists, make it dumpable and submit an SPR with the
dump and a copy of MONITR.EXE. If possible, include any known
method for reproducing the problem and/or the state of the system
at the time the BUG was observed. Analyze the dump and look at the
descriptor block pointed to by NT. Check to see if this item is
supposed to be a multiple byte code. If not, fix the item's entry.
If it is correct, you are going to have to write the code to handle
multiple byte codes.
>,NTEMPE)
TXO T1,NT.CNM ;INDICATE CODED NON MULTIPLE (PP 148 OF NM)
CALL PUTBYT ;DEPOSIT DATA TYPE BYTE IN USER STRING
RET ;error
LOAD T1,NFBUF,+NFWBLK ;GET THE CODED VALUE TO OUTPUT
CALLRET PUTBYT ;PUT THE BYTE IN THE OUTPUT STRING, AND RETURN
SUBTTL User strings -- Write ascii image data
;NMXWNN - Write ASCII image Node Name data to user data string
;Call
; NT/ Pointer to format block
; NF.BUF contains sixbit node name
;Return
; RET ;Error, code is in NXERR
; RETSKP ;Data type byte and data are in user string
NMXWNN:
SAVEAC <P1,P2>
MOVX T1,NT.AI ;Non-coded, ASCII image data
CALL PUTBYT ;Store data type byte
RET ; -error
MOVE P1,[POINT 6,NF.BUF+NFWBLK] ;Byte pointer to stringid with value
;Make a first pass over sixbit string since we need the count first
MOVE T1,P1 ;Get byte pointer
MOVEI T2,6 ;Max 6 chars in a node name
DO. ;LOOP
ILDB T3,T1 ; Get next byte
SKIPE T3 ; Empty?
SOJG T2,TOP. ; or out of bytes?
ENDDO. ; - yes, come here with T1 = remaining bytes
MOVEI T1,6 ;Get max # of bytes again
SUB T1,T2 ; and get # of bytes to write
MOVE P2,T1 ;Remember # of bytes to write
CALL PUTBYT ;Output that
RET ; -error
DO. ;LOOP again
SOSGE P2 ; Any more bytes to do?
EXIT. ; -no, all done
ILDB T1,P1 ; Get byte
ADDI T1,^O40 ; and make ASCII
CALL PUTBYT ; Dump it to user
RET ; -error
LOOP. ; And go back
ENDDO.
RETSKP
NMXWCN:
SAVEAC <P1,P2> ;GET SOME WORK AREA
LOAD T1,NFBUF,+NFWBLK ;Get the returned Circuit/Line Id word
MOVE T2,[POINT 8,NX.VAL+NMXVAR] ;A temporary place to write CN
CALL NMXC2N ;Convert Circuit Id to Name
JRST NTEMPE ;Weird error!!!!!!!!!!!!!
MOVX T1,NT.AI ;NON-CODED, ASCII IMAGE DATA
CALL PUTBYT ;STORE DATA TYPE BYTE
RET ;error
MOVE P1,[POINT 8,NX.VAL+NMXVAR] ;BYTE POINTER TO STRINGID WITH VALUE
ILDB T1,P1 ;GET FIRST BYTE, WHICH IS SIZE
MOVE P2,T1 ;COPY SIZE, TO COUNT DOWN BYTES
NMXWC2: CALL PUTBYT ;PUT IT IN USER DATA STRING
RET
ILDB T1,P1 ;GET NEXT BYTE
SOJGE P2,NMXWC2 ;DECREMENT COUNT, IF ANY BYTES LEFT, DO THEM
RETSKP ;DO A GOOD RETURN
SUBTTL User strings -- Write hexidecimal image data
;NMXWHI - Write HEXIDECIMAL image data to user data string
;Call
; NT/ Pointer to format block
; NFWBLK/ Argument Block returned from Layer
; NFBPT/ Byte pointer to start of Hexidecimal number
; NFBYT/ number of bytes in number
;Return
; RET ;Error, code is in NXERR
; RETSKP ;data type byte and data are in user string
NMXWHI:
SAVEAC <P1,P2,Q1> ;GET HOME WORK AREA
MOVX T1,NT.HI ;NON-CODED, HEXIDECIMAL IMAGE DATA
CALL PUTBYT ;STORE DATA TYPE BYTE
RET ;Error return
LOAD Q1,NFBUF,+NFWBLK ;Get the buffer address into P1
MOVE P1,[POINT 8,(Q1)] ;Point at the buffer.
MOVEI P2,6 ;Get the number of bytes in the number
MOVE T1,P2 ;copy size and...
NMXWH2: CALL PUTBYT ;PUT IT IN USER DATA STRING
RET
ILDB T1,P1 ;GET NEXT BYTE
SOJGE P2,NMXWH2 ;DECREMENT COUNT, IF ANY BYTES LEFT, DO THEM
RETSKP ;DO A GOOD RETURN
SUBTTL User strings -- Write numeric data
;NMXWNU - Write a numeric value to the user data string
;CALL
; NMXVAR/ NX block
; NT/ Pointer to STENT part of NT block
; NFBUF,+NFWBLK/ Integer to deposit
;RETURN
; RET ;On error, NXERR contains code
; RETSKP ;Integer has been placed in data string
;
NMXWNU: LOAD T2,NTLEN,(NT) ;GET LENGTH IN BYTES OF THIS NUMBER
LOAD T1,NTTYP,(NT) ;GET FORMAT OF THIS NUMBER
CAXL T1,NT.FDU ;MAKE SURE THIS IS IN NUMERIC RANGE
CAXLE T1,NT.FOC ;BETWEEN DECIMAL UNSIGNED AND OCTAL.
BUG.(CHK,NTMINT,NTMAN,SOFT,<Invalid numeric type>,,<
Cause: When generating output for a numeric field, something other than
Decimal, Hexadecimal or Octal was requested.
Action: If this BUG persists, make it dumpable and submit an SPR with the
dump and a copy of MONITR.EXE. If possible, include any known
method for reproducing the problem and/or the state of the system
at the time the BUG was observed.
>,NTEMPE)
MOVE T1,<-NT.FDU>+[ ;GET NICE TYPE.
0_3 ;DECIMAL UNSIGNED IS FORMAT 0
1_3 ;DECIMAL SIGNED IS FORMAT 1
2_3 ;HEXADECIMAL NUMBER IS FORMAT 2
-1 ;HEX IMAGE DOESN'T COME HERE.
3_3](T1) ;OCTAL NUMBER IS FORMAT 3
IOR T1,T2 ;OR IN SIZE OF FIELD
CALL PUTBYT ;PUT THIS BYTE IN USER DATA AS DATA TYPE
RET
NMXWCO: LOAD T2,NTLEN,(NT) ;GET NUMBER OF BYTES FOR COUNTER AGAIN
LOAD T1,NFBUF,+NFWBLK ;GET VALUE TO RETURN
CAXL T2,1 ;MUST BE AT LEAST ONE BYTE
CAXLE T2,4 ;MAY BE AT MOST 4 BYTES
NMXWCE: BUG.(CHK,NTMBDL,NTMAN,SOFT,<Bad multiple byte length>,,<
Cause: While generating output for a numeric field, there has been
a request to generate an illegal number of bytes.
Action: If this BUG persists, make it dumpable and submit an SPR with the
dump and a copy of MONITR.EXE. If possible, include any known
method for reproducing the problem and/or the state of the system
at the time the BUG was observed.
>,NTEMPE)
CALLRET @.(T2)
IFIW <PUTBYT&777777> ;PUT A SINGLE BYTE
IFIW <PUT2BT&777777> ;PUT A DUO BYTE
IFIW <NMXWCE&777777> ;DO THREE BYTES. ILLEGAL
IFIW <PUT4BT&777777> ;4 BYTES.
SUBTTL Write out NSP or Routing Version numbers
;NMXWVN - Write out NSP or Routing Version numbers
;
NMXWVN:
SAVEAC <P1> ;We are going to put the Version # word here
MOVX T1,NT.CM3 ;Going to build a CM-3 Data Type Field
CALL PUTBYT ;Put it into the string
RET ;Error
MOVX T1,NT.DU1 ;Now we are building a DU-1 header
CALL PUTBYT ;Put it into the string
RET
LOAD P1,NFBUF,+NFWBLK ;Get the value from the Argument Block
LOAD T1,VNVER,+P1 ;Get the Version number
CALL PUTBYT
RET
MOVX T1,NT.DU1 ;Now we are building a DU-1 header
CALL PUTBYT ;Put it into the string
RET
LOAD T1,VNECO,+P1 ;Get the ECO number
CALL PUTBYT
RET
MOVX T1,NT.DU1 ;Now we are building a DU-1 header
CALL PUTBYT ;Put it into the string
RET
LOAD T1,VNUCO,+P1 ;And finally the User ECO number
CALLRET PUTBYT ;Write out that byte and we are done
SUBTTL Write out Node Entity Id
;NMXWNE - We come here to write out the value of parameters which are
; Node Ids, such as ADJACENT NODE, DESIGNATED ROUTER, ect...
; We have already received the Node Address part of the parameter
; from the Routing Layer. Before we write out anything to the
; user buffer, we will check to see if there is enough room in the
; buffer for the entire node entity (assuming a six character name).
; If not we give up right away, subtract two from the byte count,
; because the parameter nmuber has already been stored, and report
; a resource error. Then, we will try to get a Node Name from Session
; Control. We will then write out a Coded Multiple entry,
; depending on what we have.
NMXWNE: SAVEAC <P1,P2> ;
JE NFBFF,+NFWBLK,ONENDE ;If no buffer, Write one Node Entity
LOAD P2,NFBLN,+NFWBLK ;Get the number of entity Ids in buffer
JUMPE P2,RSKP ;If none, then return skip
LOAD P1,NFBUF,+NFWBLK ;Get the buffer address
NMXWN1: MOVE T1,(P1) ;Put the Node Number into P1
CALL WRTNDE ;Write out the Node Id to user buffer
RET ;Error return
AOJ P1, ;Update the buffer pointer
SOSG P2 ;Skip if more node numbers in buffer
RETSKP
LOAD T1,NTSEQ,(NT) ;Get the Parameter Number again
CALL PUT2BT ;Need to put it into user buffer for each
RET ;entry
JRST NMXWN1 ;Loop until done.
ONENDE: LOAD T1,NFBUF,+NFWBLK ;Get the node number into T1
CALL WRTNDE ;Write out the Node Id to user buffer
RET ;Error return
RETSKP
;
; Write Out a Node Entity Id to the user Buffer
;CALL
; T1/ Node Number
;
;
WRTNDE: SAVEAC <P1,P2> ;
MOVE P1,T1 ;Get the Node Address
CALL GETNDN ;Try to get Node Name from SCLINK
JRST NONAME ;No name mapped in SCLINK
CALL NMXS2A ;Convert SIXBIT name to ASCII, store it
MOVX T1,NT.CM2 ;Get the CM-2 header
CALL PUTBYT
RET
MOVX T1,NT.DU2 ;Get the DU-2 Header byte
CALL PUTBYT ;
RET
MOVE T1,P1 ;Get the Node address back
CALL PUT2BT ;Put it into the User string
RET
MOVX T1,NT.AI ;Get the AI-6 header byte
CALL PUTBYT ;
RET
XMOVEI P1,NX.VAL+NMXVAR ;Get address of ASCII Image string
CALL PUTSTR ;Write it to the user buffer
RET
RETSKP
NONAME: MOVX T1,NT.CM1 ;Get the CM-1 header
CALL PUTBYT
RET
MOVX T1,NT.DU2 ;Get the DU-2 Header byte
CALL PUTBYT ;
RET
MOVE T1,P1 ;Get the Node address back
CALL PUT2BT ;Put it into the User string
RET
RETSKP
GETNDN: TRVAR <<NFNBLK,NF.LST>> ;Need a brand new Argument Block here
SETZM NFNBLK ;CLEAN FIRST WORD OF BLOCK
HRRI T2,1+NFNBLK ;GET POINTER TO SECOND WORD IN BLOCK
HRLI T2,NFNBLK ;POINT AT START OF BLOCK
BLT T2,NF.LST-1+NFNBLK ;CLEAN UNTIL END OF BLOCK
STOR T1,NFEID,+NFNBLK ;Store the node number back into the block
MOVX T1,.NTNOD ;We need the Entity Type (Node)
STOR T1,NFETY,+NFNBLK ;Store the Entity Type
MOVX T1,NF.A2N ;Function code into T1
XMOVEI T2,NFNBLK ;Argument Block
CALL SCLNMX ;Map Node address into Node Name
RET
LOAD T1,NFBUF,+NFNBLK ;Get the node name into T1
RETSKP
SUBTTL User strings -- Read a number from user
;NMXRNU - Read an integer from data string, and put into NXVAL
;
NMXRNU:
LOAD T1,NTLEN,(NT) ;GET SIZE OF FIELD
CALL NMXRBY ;READ BYTES
RET ;error
JUMPE T1,NTEIPV ;ILLEGAL TO SET QUANTITY TO ZERO
STOR T1,NFBUF,+NFWBLK ;SAVE VALUE IN NF BLOCK
SETZRO NFBFF,+NFWBLK ;And Flag that there is no buffer
RETSKP ;RETURN SUCCESS
NMXRNC: LOAD T1,NTLEN,(NT) ;GET SIZE OF CODED FIELD
CALL NMXRBY ;READ BYTES
RET ;Error
STOR T1,NFBUF,+NFWBLK ;SAVE VALUE IN NF BLOCK
SETZRO NFBFF,+NFWBLK ;And Flag that there is no buffer
RETSKP
NMXRCN:
CALL GETSTR ;Go read the string into Monitor Core
RET ;error
MOVE T1,[POINT 8,NX.VAL+NMXVAR] ;Pointer to beginging of circuit name
CALL NMXN2C ;Convert Name to Line ID
RET ;error
STOR T1,NFBUF,+NFWBLK ;Put Line ID into the NF Block
SETZRO NFBFF,+NFWBLK ;No buffer being used
RETSKP
NMXRNN: CALL GETSTR ;Go read the string into Monitor Core
RET ;error
SETZ T1 ;Start off with a clear Node Name
MOVE T4,[POINT 6,NF.BUF+NFWBLK] ;Destination Byte Pointer for SIXBIT name
MOVE T3,[POINT 8,NX.VAL+NMXVAR] ;Pointer to String Containing name
ILDB T2,T3 ;Get Number of bytes in Node Name
JUMPLE T2,NTEIPV ;No Name, return error...
CAXLE T2,MXNNLN ;Make sure name is not longer than six
JRST NTEIPV ;Error...
NMXRN2: ILDB T5,T3 ;GET A BYTE FROM THE NODE NAME STRINGID
CAIL T5,^O140 ;IS IT LOWER CASE
SUBI T5,^O40 ;MAKE IT UPPER CASE
SUBI T5,^O40 ;MAKE IT SIXBIT
IDPB T5,T4 ;STORE IT IN THE SIXBIT NODE NAME
SOJG T2,NMXRN2 ;LOOP UNTIL ENTIRE NAME COPIED.
SETZRO NFBFF,+NFWBLK ;Make sure Layer knows that is no buffer
RETSKP
NMXRHI:
SAVEAC <P1>
MOVX T1,FHIBLK ;Get the size of the Buffer we need
STOR T1,NFBLN,+NFWBLK ;Put it into the argument block
CALL DNGWDS ;Go allocate the block
ERRRET NTERES ;No memory available, resource error
MOVE P1,T1 ;Put buffer address into P1
STOR T1,NFBUF,+NFWBLK ;Put the buffer addr into the arg block
SETONE NFBFF,+NFWBLK ;And tell Layer to expect a buffer
CALL GETSTR ;Go read the string into Monitor Core
RET ;error
MOVE T1,[POINT 8,NX.VAL+NMXVAR] ;Pointer to beginging of Hex String
MOVE T2,[POINT 8,(P1)] ;Pointer to Buffer to go to DECnet Layer
STOR T2,NFBPT,+NFWBLK ;Save Virgin Pointer for the DECnet Layer
ILDB T3,T1 ;Get the Length of the string
JUMPLE T3,NTEIPV ;Negative or zero, Invalid Parameter Value
CAXLE T3,MXHILN ;And it must be less than or equal to 6
JRST NTEIPV ;error
STOR T3,NFBYT,+NFWBLK ;Send the number of bytes to the DECnet Layer
NMXRH1: ILDB T4,T1 ;Get a byte from user
IDPB T4,T2 ;Put it into Buffer
SOJG T3,NMXRH1 ;Loop until entire string is copied
RETSKP
; I have commented out this routine (except for RETSKP) because
; there are currently NO Decimal Signed Parameters maintained
; by DECnet Layers in the Monitor.
;
NMXRNS:
; LOAD T1,NTLEN,(NT) ;GET SIZE OF FIELD
; CALL NMXRBY ;READ THE BYTES
; RET ;Error
; JUMPE T1,NTEIPV ;ZERO IS AN ILLEGAL NUMBER
; LOAD T2,NTLEN,(NT) ;GET SIZE AGAIN
; IMULI T2,^D8 ;CONVERT TO NUMBER OF BITS
; SETO T3, ;POSSIBLE SIGN EXTENSION
; ASH T3,(T2) ;SHIFT TO BECOME ONLY THE SIGN BITS
; TDNE T3,T1 ;IS THE SIGN BIT ON?
; IOR T1,T3 ;YES, TURN ON ALL THE SIGN BITS
; STOR T1,NFBUF,+NFWBLK ;SAVE VALUE IN NF BLOCK
; SETZRO NFBFF,+NFWBLK ;And Flag that there is no buffer
RETSKP
NMXRBY: CAXL T1,1 ;RANGE CHECK NUMBER OF BYTES TO READ
CAXLE T1,4 ;TO ENSURE ONLY 1,2, AND 4
NMXRBE: BUG.(CHK,NTMILN,NTMAN,SOFT,<Illegal number size>,,<
Cause: When going to read a numeric value from the user's string,
the format descriptor block for this item has specified an illegal
number of bytes to read.
Action: If this BUG persists, make it dumpable and submit an SPR with the
dump and a copy of MONITR.EXE. If possible, include any known
method for reproducing the problem and/or the state of the system
at the time the BUG was observed.
>,NTEMPE)
CALLRET @.(T1) ;DISPATCH
IFIW <GETBYT&777777> ;GET A SINGLE BYTE
IFIW <GET2BT&777777> ;GET 2 BYTES OF INTEGER
IFIW <NMXRBE&777777> ;
IFIW <GET4BT&777777> ;GET 4 BYTES
SUBTTL User strings -- Read and write milliseconds
;NMXWNM - Write milliseconds
;Call
; NMXVAR/ NX block
; NT/ Pointer to NT begstr
;Return
; see NMXWNU
NMXWNM: LOAD T1,NFBUF,+NFWBLK ;GET VALUE WE ARE GOING TO WRITE OUT
IDIVI T1,TIMBAS ;CONVERT TO SECONDS
STOR T1,NFBUF,+NFWBLK ;PUT BACK WHERE IT CAME FROM
LOAD T1,NTLEN,(NT) ;GET THE LENGTH WE ARE GOING TO STORE
; IOR T1,0_3 ;NICE CODE INDICATING DECIMAL UNSIGNED
CALL PUTBYT ;PUT THE NICE HEADER IN
RET ;error...
JRST NMXWCO ;AND JOIN COMMON CODE
;NMXRNM - Read seconds, store milliseconds
;Call
; NMXVAR/ NX block
; NT/ Pointer to NT begstr
NMXRNM: CALL NMXRNU ;READ THE NUMBER AS DECIMAL UNSIGNED
RET ;error...
MOVX T1,TIMBAS ;CONVERSION FACTOR
OPSTRM <IMULB T1,>,NFBUF,+NFWBLK ;CONVERT TO MILLISECONDS
RETSKP ;AND RETURN SUCCESSFULLY
SUBTTL User strings -- Copy STRINGID from user to exec
;GETSTR - Copy a number of bytes (String) to a place in monitor core.
;Call
; NMXVAR/ NX block
;Return
; Non-skip on address check, error already in NXERR
; Skip if successfull, string starting at NXVAL
GETSTR: XMOVEI T1,NX.DAT+NMXVAR ;GET POINTER TO DATA BP BLOCK
JRST GETST0 ;JUMP INTO MAIN CODE
GETSTI: XMOVEI T1,NX.EID+NMXVAR ;GET POINTER TO ENITITY ID BP BLOCK
GETST0: SAVEAC <P1,P2,NT> ;SAVE SOME DATA ACS
MOVE P2,T1 ;SAVE POINTER
MOVE P1,[POINT 8,NX.VAL+NMXVAR] ;PUT STRING IN VALUE PART OF NX
MOVE T2,P2 ;GET POINTER TO BP BLOCK
CALL DNGUBT ;GET A SINGLE BYTE
RET ;error...
IDPB T1,P1 ;PUT BYTE AWAY IN DESTINATION STRING
CAXLE T1,^D32 ;WILL THIS STRING FIT IN NXVAL?
ERRRET NTEPVL ;NOPE. PARAMETER TOO LONG
MOVE NT,T1 ;SAVE NUMBER OF BYTES TO DO
GETST1: SOJL NT,RSKP ;AT END, RETURN SUCCESS
MOVE T2,P2 ;GET POINTER TO BP BLOCK
CALL DNGUBT ;GET A BYTE
RET ;error...
IDPB T1,P1 ;PUT BYTE AWAY.
JRST GETST1 ;DO ANOTHER BYTE
SUBTTL User strings -- Copy STRINGID from exec to user
;PUTSTR - Copy string from exec space to user data string
;Call
; P1/ Full word pointer to stringid in exec space
;Return
; RET on address check
; RETSKP with string in user address space
PUTSTR: SAVEAC <NT,P2> ;SAVE AN AC FOR BYTE COUNT
MOVX P2,<POINT 8,(P1)> ;MAKE AN 8-BIT BYTEPOINTER TO STRING
ILDB T1,P2 ;GET BYTE COUNT (FIRST BYTE)
MOVE NT,T1 ;SAVE BYTE COUNT FOR LATER
CALL PUTBYT ;PUT BYTE IN USER'S OUTPUT STRING
RET ;error...
PUTST1: SOJL NT,RSKP ;RETURN WHEN DONE
ILDB T1,P2 ;GET ANOTHER BYTE
CALL PUTBYT ;PUT IN USER DATA STRING
RET ;error...
JRST PUTST1 ;DO ANOTHER BYTE
SUBTTL User strings -- Get and put user byte routines.
;CALL
; T1/ integer to deposit
;RETURN
; RET on error, code in NXERR
; RETSKP with number deposited/loaded from/to T1
PUTBYT: XMOVEI T2,NX.DAT+NMXVAR ;POINTER TO BYTE POINTER/COUNT STRUCTURE
JRST DNPUBT ;PUT THE BYTE IN THE STREAM.
PUT4BT: SAVEAC <P1,P2> ;P1 IS OUR DATA, P2 IS THE NUMBER OF BYTES
XMOVEI T2,NX.DAT+NMXVAR ;POINTER TO BYTE POINTER/COUNT STRUCTURE.
MOVX P2,4 ;DO 4 BYTES
JRST PUTMBT ;PUT MULTIPLE BYTES
PUT2BT: SAVEAC <P1,P2> ;P1 IS DATA, P2 IS COUNT OF BYTES
XMOVEI T2,NX.DAT+NMXVAR ;POINTER TO BYTE POINTER/COUNT STRUCTURE.
MOVX P2,2 ;WE ARE DOING 2 BYTES
;; JRST PUTMBT ;PUT MULTIPLE BYTES
PUTMBT:
MOVE P1,T1 ;SAVE ORIGINAL BYTES
PUTMB1: LDB T1,[POINT 8,P1,35] ;GET BOTTOM BYTE
CALL DNPUBT ;STORE IT IN USER'S DATA STRING
RET ;error...
SOJLE P2,RSKP ;IF DONE, RETURN SUCCESS.
ASH P1,-10 ;DROP (INTO BIT BUCKET) THE BYTE WE JUST PUT
JRST PUTMB1 ;AND PUT ANOTHER BYTE IN USER'S STRING
GETEBY:
XMOVEI T2,NX.EID+NMXVAR ;POINTER TO BP FOR ENTITY ID
CALLRET DNGUBT ;AND GET A BYTE FROM IT.
GETBYT:
XMOVEI T2,NX.DAT+NMXVAR ;POINTER TO BYTE POINTER/COUNT STRUCTURE
CALLRET DNGUBT ;AND GO GET THE BYTE
GET2BT:
SAVEAC P1 ;WE ARE GOING TO ACCUMULATE BYTES HERE
XMOVEI T2,NX.DAT+NMXVAR ;POINTER TO BYTE POINTER/COUNT STRUCTURE.
CALL DNGUBT ;GET A BYTE OUT OF STREAM
RET ;error...
MOVE P1,T1 ;SAVE WHILE WE GET HIGH ORDER BYTE
CALL DNGUBT ;GET SECOND BYTE
RET ;error...
ASH T1,8 ;SINCE THIS IS HIGH ORDER, MAKE ROOM FOR LOW
IOR T1,P1 ;OR IT IN, MAKING A 2-BYTE AC
RETSKP ;RETURN WITH 2 BYTES IN T1
GET4BT:
SAVEAC P1 ;THIS IS WHERE WE ACCUMULATE INCOMING BYTES
XMOVEI T2,NX.DAT+NMXVAR ;POINTER TO BYTE POINTER/COUNT STRUCTURE.
CALL DNGUBT ;GET A BYTE OUT OF USER STREAM
RET ;error...
MOVE P1,T1 ;COPY BYTE INTO SAFE AC
ROT P1,-10 ;NEXT BYTE IS HIGHER ORDER THAN THIS
CALL DNGUBT ;GET BYTE NUMBER 2
RET ;error...
IOR P1,T1 ;ACCUMULATE THIS BYTE IN
ROT P1,-10 ;LET NEXT BYTE COME IN ABOVE THIS ONE
CALL DNGUBT ;GET BYTE NUMBER 3
RET ;error...
IOR P1,T1 ;ACCUMULATE IT IN
ROT P1,-10 ;NEXT BYTE IS THE HIGHEST ORDER BYTE
CALL DNGUBT ;GET THE LAST (4TH) BYTE
RET ;error...
IOR T1,P1 ;INCLUDE STUFF WE HAVE BEEN ACCUMULATING
ROT T1,30 ;ROTATE SO WE HAVE A REAL NUMBER
RETSKP ;RETURN WITH THE ENTIRE NUMBER IN T1
SUBTTL User strings -- Get and put single bytes into data strings.
;Call
; T1/ Byte to be put, or byte returned.
; T2/ Pointer to BP block
;Return
; RET on error, error code in NXERR
; RETSKP T1 deposited/loaded
;
;Note - These assume the caller has verified the byte pointer by calling
;CHKIND, to avoid the possibility of an indirect loop, and to insure that
;the destination byte stream is in core.
;For reasons of efficiency, T2 is guaranteed to be preserved.
DNPUBT:
OPSTRM <SOS T3,>,BPBYT,(T2) ;DECREMENT COUNT OF AVAILABLE BYTES
JUMPL T3,NTERES ;PARAMETERS TOO LONG
TMNE NXMCX,+NMXVAR ;Writing to monitor context?
IFSKP. ; -no
S1XCT <XCTBU [IDPB T1,(T2)]> ;deposit the byte in user context
ELSE. ; -yes,
IDPB T1,(T2) ; just a single deposit
ENDIF.
RETSKP
DNGUBT:
OPSTRM <SOS T3,>,BPBYT,(T2) ;DECREMENT COUNT OF BYTES PERMITTED
JUMPL T3,NTEPAM ;PARAMETER MISSING
S1XCT <
XCTBU [ILDB T1,(T2)] ;DO THE ILDB
>
RETSKP ;GOT THE BYTE IN T1 - RETURN SUCCESS
SUBTTL Miscellaneous -- Error returns
;;Error returns. Put error code in AC and .NTERR in user's block,
;and return non-skip.
DEFINE NMXERR(CODE),<
MOVX T1,^D'CODE ;ERROR CODE
JRST NTEERR ;AND DO ERROR
>
NTEUFO: NMXERR(-1) ;UNRECOGNIZED FUNCTION OR OPTION
NTEIMF: NMXERR(-2) ;INVALID MESSAGE FORMAT
NTEPRV: NMXERR(-3) ;PRIVILEGE VIOLATION.
NTEMPE: NMXERR(-5) ;MANAGEMENT PROGRAM ERROR
NTEUPT: NMXERR(-6) ;UNRECOGNIZED PARAMETER TYPE
NTEURC: NMXERR(-8) ;UNRECOGNIZED COMPONENT
NTEINI: NMXERR(-9) ;INVALID IDENTIFICATION
; NELCE%==-10 ;LINE COMMUNICATION ERROR
; NECWS%==-11 ;COMPONENT IN WRONG STATE
NTERES: NMXERR(-15) ;RESOURCE ERROR
NTEIPV: NMXERR(-16) ;INVALID PARAMETER VALUE
NTENRM: NMXERR(-20) ;NO ROOM (OR SLOT ALREADY TAKEN)
NTEPNA: NMXERR(-22) ;PARAMETER NOT APPLICABLE
NTEPVL: NMXERR(-23) ;PARAMETER VALUE TOO LONG
NTEOPF: NMXERR(-25) ;OPERATION FAILURE
NTEFNS: NMXERR(-26) ;FUNCTION NOT SUPPORTED
NTEIPG: NMXERR(-27) ;INVALID PARAMETER GROUPING
NTEPAM: NMXERR(-29) ;PARAMETER MISSING
NTEADC: NMXERR(-47) ;ADDRESS CHECK
NTEERR: STOR T1,NXERR,+NMXVAR ;Save the error code the Layer sent back
JE NFBFF,+NFWBLK,RTN ;If no buffer, return now
LOAD T1,NFBUF,+NFWBLK ;Get the Counter Block
CALL DNFWDS ;Free up memory
SETZRO NFBUF,+NFWBLK ;Get rid of the address
SETZRO NFBFF,+NFWBLK ;and the flag
RET ;Return non-skip
SUBTTL Miscellaneous -- Name/number conversion.
;NMXA2N - Address to name conversion
;Call
; T1/ Node address
;Return
; RET ;No such node, illegal, ect.
; RETSKP, name in NXVAL ;on success
NMXA2N: SETZRO NFBUF,+NFWBLK ;SCLINK doesn't like anything in here....
STOR T1,NFEID,+NFWBLK ;Store the Node Address in the Argument block
MOVX T1,.NTNOD ;NODE ENTITY TYPE
STOR T1,NFETY,+NFWBLK ;Put it into the block
MOVX T1,NF.A2N ;Function code into T1
XMOVEI T2,NFWBLK ;Argument Block address
CALL SCLNMX ;CONVERT NODE ADDRESS TO NODE NAME
IFNSK.
SKIPE T1 ;Is it a zero error code?
JRST NTEERR ;No, It is a real error then...
SETZRO NXVAL,+NMXVAR ;SET BYTE COUNT AND NODE NAME TO 0
RETSKP ;And do an error return
ENDIF.
LOAD T1,NFBUF,+NFWBLK ;Get the SIXBIT Node Name
CALL NMXS2A ;Convert name and store it in NMXVAR block
RETSKP ;RETURN SUCCESS
;Convert SIXBIT Node Name to ASCII Node Name and save in NMXVAR Block
;Call
; T1/ SIXBIT Node Name
;Return
; RET always, ASCII Node Name stored in NXVAL,+NMXVAR
NMXS2A: SETZ T2, ;START OFF WITH ZERO BYTES RETURNED
MOVE T3,[POINT 6,T1] ;POINTER TO THE NODE NAME RETURNED
MOVEI T4,6 ;MAXIMUM NUMBER OF CHARACTERS TO CHECK
NMXS21: SOSL T4
IFNSK.
ILDB T5,T3 ;GET A BYTE FROM THE NAME
JUMPE T5,NMXS22 ;IF ZERO BYTE, END OF NAME
AOJA T2,NMXS21 ;ELSE KEEP COUNTING.
ENDIF.
NMXS22: MOVE T4,[POINT 6,T1] ;BYTE POINTER TO THE NODE NAME
MOVE T3,[POINT 8,NX.VAL+NMXVAR] ;BYTE POINTER TO WHERE WE WANT NAME
IDPB T2,T3 ;START OFF STRINGID WITH NUMBER OF CHARACTERS
NMXS23: ILDB T5,T4 ;GET A BYTE FROM THE NAME
ADDI T5,^O40 ;MAKE IT ASCII
IDPB T5,T3 ;STORE IT IN NMXVAR IN STRINGID FORMAT
SOJG T2,NMXS23 ;AND CONTINUE COPYING UNTIL DONE.
RET
;NMXN2A - Name to address conversion
;Call
; NXVAL+NMXVAR/ Stringid for node name. Max 6 chars.
;Return
; RET ;Unknown name. NTEURC.
; RETSKP ;T1 contains node address.
NMXN2A: SETZ T1, ;START OFF WITH A CLEAN NODE NAME
MOVE T6,[POINT 8,NX.VAL+NMXVAR] ;BYTE POINTER TO STRINGID WITH NAME
MOVE T5,[POINT 6,NF.EID+NFWBLK] ;BYTE POINTER TO CREATE SIXBIT NAME
ILDB T4,T6 ;GET COUNT OF BYTES
JUMPE T4,RTN ;IF NOTHING, ERROR
NMXN2B: ILDB T3,T6 ;GET A BYTE FROM THE NODE NAME
CAIL T3,^O140 ;IS IT LOWER CASE
SUBI T3,^O40 ;MAKE IT UPPER CASE
SUBI T3,^O40 ;MAKE IT SIXBIT
IDPB T3,T5 ;STORE IT IN THE NODE NAME
SOJG T4,NMXN2B ;AND LOOP UNTIL BYTES EXHAUSTED.
MOVX T1,.NTNOD ;NODE ENTITY TYPE
STOR T1,NFETY,+NFWBLK ;Send it to Session Control Layer
MOVX T1,NF.N2A ;Get the Function Code
XMOVEI T2,NFWBLK ;And the address of the Argument Block
CALL SCLNMX ;CONVERT NODE NAME TO NODE ADDRESS
JRST NTEERR ;SESSION CONTROL CAN'T FIND THE NAME. ERROR.
LOAD T1,NFBUF,+NFWBLK ;Put the address into T1
RETSKP ;SUCCESS. T1 CONTAINS NODE ADDRESS.
XLIST
LIT
LIST
IFN FTOPS10, .XCMSY
IFN FTOPS20, TNXEND
END