Trailing-Edge
-
PDP-10 Archives
-
BB-R598A-RM_1983
-
swskit-v3/listings/xpt/xpthel.list
There are no other files named xpthel.list in the archive.
XPTHEL 25-Jan-1983 09:49:28 TOPS-20 Bliss-16 2A(530) Page 1
30-Dec-1982 21:26:56 NETPKG:<XPT>XPTHEL.BLI.8 (1)
; 0001 module XPTHEL (
; 0002 IDENT = 'X01170'
; 0003 ) =
; 0004 begin
; 0005
; 0006 !
; 0007 ! COPYRIGHT (c) 1980, 1981, 1982
; 0008 ! DIGITAL EQUIPMENT CORPORATION
; 0009 ! Maynard, Massachusetts
; 0010 !
; 0011 ! This software is furnished under a license and may be used
; 0012 ! and copied only in accordance with the terms of such license
; 0013 ! and with the inclusion of the above copyright notice. This
; 0014 ! software or any other copies thereof may not be provided or
; 0015 ! otherwise made available to any other person. No title to
; 0016 ! and ownership of the software is hereby transferred.
; 0017 !
; 0018 ! The information in this software is subject to change
; 0019 ! without notice and should not be construed as a commitment
; 0020 ! by DIGITAL EQUIPMENT CORPORATION.
; 0021 !
; 0022 ! DIGITAL assumes no responsibility for the use or reliability
; 0023 ! of its software on equipment which is not supplied by
; 0024 ! DIGITAL.
; 0025 !
; 0026
; 0027 !++
; 0028 ! FACILITY: Transport
; 0029 !
; 0030 ! ABSTRACT:
; 0031 !
; 0032 ! Transport Hello module: Sends out Hello messages on each active
; 0033 ! line.
; 0034 !
; 0035 ! ENVIRONMENT: MCB
; 0036 !
; 0037 ! AUTHOR: L. Webber , CREATION DATE: 23-Oct-79
; 0038 !
; 0039 ! MODIFIED BY:
; 0040 !
; 0041 ! L. Webber, 23-Oct-79 : VERSION 1.00
; 0042 !
; 0043 ! 1.01 L. Webber, 19-Dec-79
; 0044 ! Took out the Node Listener function (which went into Line Support)
; 0045 !
; 0046 ! 1.02 L. Webber, 3-Apr-80
; 0047 ! Modified to support node and line sub-data-bases
; 0048 !
; 0049 ! 1.03 L. Webber, 30-Jun-80
; 0050 ! Modify to use MCBLIB macros
; 0051 !
; 0052 ! 1.04 L. Webber, 11-Dec-80
XPTHEL 25-Jan-1983 09:49:28 TOPS-20 Bliss-16 2A(530) Page 2
X01170 30-Dec-1982 21:26:56 NETPKG:<XPT>XPTHEL.BLI.8 (1)
; 0053 ! Modity to support MCB 3.1
; 0054 !
; 0055 ! 1.05 L. Webber, 9-Feb-81
; 0056 ! Change references to SNDBUF to CALL$E
; 0057 !
; 0058 ! 1.06 L. Webber, 9-Feb-81
; 0059 ! Change back to direct call; an interface routine has been added.
; 0060 !
; 0061 ! 1.07 L. Webber, 10-Feb-81
; 0062 ! Hello has gone into XPE; make HELLO CALL$ and call _SNDBUF instead
; 0063 ! of SNDBUF.
; 0064 !
; 0065 ! 1.08 L. Webber, 24-Feb-81
; 0066 ! Add RCVHEL to validity-check received Hello messages
; 0067 !
; 0068 ! 1.09 L. Webber, 17-Mar-81
; 0069 ! Fix RCVHEL to terminate the function CCB and to return the correct
; 0070 ! indication for line disposition. Fix the data-testing code.
; 0071 !
; 0072 ! 1.10 L. Webber, 31-Mar-81
; 0073 ! Add reason code to "invalid data" event in RCVHEL.
; 0074 !
; 0075 ! 1.11 L. Webber, 2-Apr-81
; 0076 ! Add reason code to "node address change" event in RCVHEL; also,
; 0077 ! change build of expected node parameter to call to EP_EXNODE.
; 0078 !
; 0079 ! 1.12 L. Webber, 3-Apr-81
; 0080 ! Add LIXes as NMXID for all event logging.
; 0081 !
; 0082 ! 1.13 L. Webber, 7-Apr-81
; 0083 ! Fix bug in RCVHEL which fails all HELLO messages with even length.
; 0084 !
; 0085 ! 1.14 L. Webber, 16-Apr-81
; 0086 ! Change the size of a Hello message from 72 data bytes to 12.
; 0087 !
; 0088 ! 1.15 L. Webber, 3-Jun-81
; 0089 ! Get a 16-byte buffer instead of a CSB.
; 0090 !
; 0091 ! 1.16 L. Webber, 24-Sep-81
; 0092 ! Modify event logging to use new macros for building parameters.
; 0093 !
; 0094 ! 1.17 A. Peckham, 19-Apr-82
; 0095 ! Eliminate calls to LOG_EVENT, GETLINE.
; 0096 ! PKTA_HDR has gone to XPE. Make local call now.
; 0097 !
; 0098 !--
XPTHEL 25-Jan-1983 09:49:28 TOPS-20 Bliss-16 2A(530) Page 3
X01170 30-Dec-1982 21:26:56 NETPKG:<XPT>XPTHEL.BLI.8 (2)
; 0099
; 0100 !
; 0101 ! INCLUDE FILES:
; 0102 !
; 0103
; 0104 require 'XPTMAC';
; 0202
; 0203 !
; 0204 ! TABLE OF CONTENTS
; 0205 !
; 0206
; 0207 forward routine
; 0208 HELLO: LINKAGE_DB novalue;
; 0209
; 0210 !
; 0211 ! MACROS:
; 0212 !
; 0213
; 0214 !
; 0215 ! EQUATED SYMBOLS:
; 0216 !
; 0217
; 0218 !
; 0219 ! OWN STORAGE:
; 0220 !
; 0221
; 0222 !
; 0223 ! EXTERNAL REFERENCES:
; 0224 !
XPTHEL 25-Jan-1983 09:49:28 TOPS-20 Bliss-16 2A(530) Page 4
X01170 30-Dec-1982 21:26:56 NETPKG:<XPT>XPTHEL.BLI.8 (3)
; 0225 global routine HELLO (LINEb): LINKAGE_DB novalue =
; 0226
; 0227 !++
; 0228 ! FUNCTIONAL DESCRIPTION:
; 0229 !
; 0230 ! This routine is called on a timer interval. If the Hello_clock has expired,
; 0231 ! then for each line in the RU state, scanned in a round-robin fashion starting
; 0232 ! with NEXTline, a Hello message is constructed and sent out by calling _SNDBUF
; 0233 ! in Forwarding. If an SDB is not available to construct the message, no
; 0234 ! message is sent. The Hello message constructed will contain 12 bytes of test
; 0235 ! data.
; 0236 !
; 0237 ! FORMAL PARAMETERS
; 0238 !
; 0239 ! NONE.
; 0240 !
; 0241 ! IMPLICIT INPUTS
; 0242 !
; 0243 ! Hello_clock, NEXTline, Nty
; 0244 !
; 0245 ! ROUTINE VALUE:
; 0246 ! COMPLETION CODES:
; 0247 !
; 0248 ! NONE.
; 0249 !
; 0250 ! SIDE EFFECTS:
; 0251 !
; 0252 ! NONE.
; 0253 !
; 0254 !--
; 0255
; 0256 begin
; 0257 require 'XPTSYM';
; 0294 local CCB: ref block field (C_XPT_fields);
; 0295
; 0296 if .LINEstate eql RU
; 0297 then selectone .Nty of
; 0298 set
; 0299 [Full,Small]:
; 0300 begin
; 0301 !
; 0302 ! Get an CCB for the message
; 0303 !
; 0304 if not $MCB_GET_CCB (CCB) then return;
; 0305
; 0306 CCB[C_XPT_ALLOCATION] = 0; ! No buffer
; 0307 CCB[C_ADDR] = .Hello_msg_ADDR; ! Copy address
; 0308 CCB[C_CNT] = .Hello_msg_CNT; ! of canned message
; 0309 CCB[C_XPT_TYPE] = UPDATEcode; ! Flag message as Routing/Hello
; 0310 CCB[C_XPT_SUBTYPE] = HELLOcode; ! (with a side of Hello)
; 0311 !
; 0312 ! Send the message out
XPTHEL 25-Jan-1983 09:49:28 TOPS-20 Bliss-16 2A(530) Page 5
X01170 30-Dec-1982 21:26:56 NETPKG:<XPT>XPTHEL.BLI.8 (3)
; 0313 !
; 0314 CALL$E(_SNDBUF,(PD_XPE),.LINEb,.CCB);
; 0315 end;
; 0316 [otherwise]:
; 0317 ;
; 0318 tes;
; 0319
; 0320 Send_hello = false;
; 0321 end; !End of HELLO
.TITLE XPTHEL
.IDENT /X01170/
.GLOBL .CRDAT, $CCBGT, .SNDBUF, $CALLE
.SBTTL HELLO
000000 .PSECT $CODE$, RO
000000 010446 HELLO::
U.1: MOV R4,-(SP) ; 0225
000002 121527 000010 CMPB (R5),#10 ; LINEB,* 0296
000006 001045 BNE 1$
000010 116500 000002 MOVB 2(R5),R0 ; *(LINEB),* 0297
000014 020027 000002 CMP R0,#2
000020 002440 BLT 1$
000022 020027 000003 CMP R0,#3
000026 003035 BGT 1$
000030 004767 000000G JSR PC,$CCBGT ; 0304
000034 103434 BCS 2$
000036 005064 000034 CLR 34(R4) ; *(CCB) 0306
000042 016700 000002G MOV .CRDAT+2,R0 ; 0307
000046 016064 000164 000020 MOV 164(R0),20(R4) ; *,*(CCB)
000054 016064 000166 000022 MOV 166(R0),22(R4) ; *,*(CCB) 0308
000062 112764 000005 000032 MOVB #5,32(R4) ; *,*(CCB) 0310
000070 010446 MOV R4,-(SP) ; CCB,* 0314
000072 010546 MOV R5,-(SP) ; LINEB,*
000074 012746 000002 MOV #2,-(SP)
000100 012746 000000G MOV #.SNDBUF,-(SP)
000104 005046 CLR -(SP)
000106 116016 000002 MOVB 2(R0),(SP)
000112 004767 000000G JSR PC,$CALLE
000116 062706 000012 ADD #12,SP ; 0300
000122 042715 010000 1$: BIC #10000,(R5) ; *,LINEB 0320
000126 012604 2$: MOV (SP)+,R4 ; 0225
000130 000207 RTS PC
; Routine Size: 45 words, Routine Base: $CODE$ + 0000
; Maximum stack depth per invocation: 7 words
; 0322 end !End of module XPTHEL
XPTHEL 25-Jan-1983 09:49:28 TOPS-20 Bliss-16 2A(530) Page 6
X01170 30-Dec-1982 21:26:56 NETPKG:<XPT>XPTHEL.BLI.8 (3)
; 0323 eludom
; PSECT SUMMARY
;
; Psect Name Words Attributes
; $CODE$ 45 RO , I , LCL, REL, CON
; LIBRARY STATISTICS
;
; -------- Symbols -------- Blocks
; File Total Loaded Percent Read
;
; NETPKG:<MCB>XPORTX.L16.15 599 0 0 0
; NETPKG:<MCB>MCBLIB.L16.15 372 30 8 0
; NETPKG:<MCB>NMXLIB.L16.13 200 0 0 0
; NETPKG:<XPT>XPTLIB.L16.3 510 147 28 0
; Size: 45 code + 0 data words
; Run Time: 00:02.5
; Elapsed Time: 00:08.9
; Memory Used: 30 pages
; Compilation Complete
ADDRESS 156+ 158+ 159+ 161+ 162+ 164+ 165+ 171+ 172+ 175+ 176+ 177+
BPT 185+# 197+#
BUFCHK 189+ 190+# 199+ 200+#
CALL$E 314
CCB 294 304 306# 307# 308# 309# 310# 314
CHKBUF 192+* 193+
C_ADDR 307
C_CNT 308
C_XPT_ALLOCATION 306
C_XPT_FIELDS 294
C_XPT_SUBTYPE 310
C_XPT_TYPE 309
FALSE 320
FULL 299
GETQ 156+#
GETW 135+# 158+ 159+
HELLOCODE 310
HELLO_MSG_ADDR 307
HELLO_MSG_CNT 308
HELLO 208 225*
I 180+ 182+
J 180+ 182+
LINEBLOCK 284+
LINEB 225 282+ 284+ 314
LINESTATE 296
LINKAGE_DB 208 225#
M 180+ 181+
MATRIX 180+# 182+
MCB$GAW_PROCESS_DATA_BASE 287+ 288+ 291+
N 180+ 181+
NL 180+ 182+
NODEBLOCK 279+
NODEB 277+ 279+
NOP 197+ 198+ 200+
NO_LINEB 283+
NO_NODEB 278+
NTY 297
PD_XPE 314
PTR 135+ 138+ 139+ 142+ 145+ 146+ 152+ 153+ 156+ 158+ 159+ 161+
164+ 165+ 166+ 167+ 171+ 172+
PUTQ 161+#
PUTW 142+# 171+ 172+
RU 296
SEND_HELLO 320#
SMALL 299
UNIT 180+# 181+ 182+
UPDATECODE 309
VALUE 142+ 143+ 145+ 146+ 151+
X 137+ 138+# 139+# 140+ 150+ 151+# 152+ 153+
XPTDBBLOCK 293+
XPTDB 290+ 291+# 292+
XPTHEL 1#
ZEROQ 175+#
_SNDBUF 314
$MCB_GET_CCB 304
%CTCE 143+ 162+
%REMAINING 187+