Trailing-Edge
-
PDP-10 Archives
-
BB-R775A-BM
-
documentation/define.lis
There are 26 other files named define.lis in the archive. Click here to see a list.
00001 !++
00002 !
00003 ! ***** EYE READABLE ERROR FILE FORMATS *****
00004 !
00005 ! This file contains the definitions of the TOPS-10 and TOPS-20
00006 ! error file formats. It is the master field definition source
00007 ! for the SPEAR program. The ITRANS program translates these
00008 ! eye readable definitions into a BLISS library file for use in
00009 ! the SPEAR program.
00010 !
00011 !--
00012
00013 !++
00014 !
00015 ! TOPS-10 and TOPS-20 ERROR.SYS RECORD FORMATS
00016 !
00017 !
00018 !
00019 ! DEFINE.EYE contains descriptions of the format of the system event
00020 ! file and contents of each type of entry recorded by TOPS-10 and TOPS-20.
00021 ! The file is created and appended to by a portion of the monitor and is read
00022 ! by SPEAR. SPEAR considers each entry a separate entity and treats each one
00023 ! separately. The recording program also considers each entry or record
00024 ! separately and appends each to the end of the file. The only exception to
00025 ! this policy is the synchronization word at the start of each block
00026 ! (128 words). This word is a pointer or offset to the start of the first
00027 ! entry in the current block and is used by SPEAR to get back in sync in case
00028 ! of trouble. This word is required because entries may cross block boundaries
00029 ! to conserve disk space.
00030 !
00031 ! Each entry or record in ERROR.SYS is composed of two sections, a header
00032 ! section and a body section. The header section contains the entry type,
00033 ! date and time the event was recorded, the processor serial number that
00034 ! detected the error, and the length of the header and body sections. The
00035 ! body sections contain the various data items that make up the entry. The
00036 ! format of the header section is constant regardless of the entry type.
00037 !
00038 !
00039 ! The body section of each entry conforms to a general block format. The first
00040 ! line of an entry contains the block type ENTRY. The second line contains the
00041 ! entry type, an octal code number, and the block name, used by SPEAR to refer
00042 ! to the block. The next part of the block description can be broken down into
00043 ! columns.
00044 !
00045 ! Item name Word number Field description Comments
00046 ! _________ ___________ _________________ ________
00047 !
00048 ! The item name is the name used by SPEAR to refer to the item. The word
00049 ! number is a decimal number of the position of the item. The field
00050 ! description is the size of the item in bits. Comments may occur as the last
00051 ! field of any line and are marked with an exclamation point.
00052 !
00053 ! The last line of the block contains the word END followed by the type of
00054 ! block being terminated.
00055 !
00056 ! ENTRY blocks may also contain pointers to subblocks called TABLE, WORD_10,
00057 ! or WORD_11. These subblocks contains more specific descriptions of the
00058 ! information in the ENTRY. For example, the disk error entry may contain
00059 ! pointers to the MASSBUS register table.
00060 !
00061 ! ENTRY HEADER FORMAT
00062 !
00063 ! This header is used to describe the contents of each entry.
00064 !
00065 ! HRDCOD See Note 1
00066 !
00067 ! HDRDAT Date and time of entry in Universal Format
00068 !
00069 ! HDRUPT System uptime at entry. LH = No. days, RH = fraction of day
00070 !
00071 ! HDRPSN Processor serial No. where entry was recorded
00072 !
00073 ! Note 1 Bits Description
00074 !
00075 ! HDRCOD 0-8 Event code; tells program how to process this
00076 ! entry. See Note 2 for range of event codes.
00077 !
00078 ! 9-15 Reserved.
00079 !
00080 ! 16 If set, indicates that this entry was extracted
00081 ! from a crash.
00082 !
00083 ! 17 If set, this entry was recorded by TOPS-20.
00084 !
00085 ! 18-23 Header Format Version, presently = 1.
00086 !
00087 ! 24-26 Header Length, presently = 4.
00088 !
00089 ! 27-35 Entry Length excluding header, maximum = 777.
00090 !
00091 !
00092 ! Note 2
00093 ! Event Codes
00094 !
00095 ! All event codes are in the range of 0 to 777 with reservations as described:
00096 !
00097 ! 000 Illegal.
00098 !
00099 ! 1-376 Reserved by DEC for use with SPEAR.
00100 !
00101 ! 400-477 Reserved for customer use with SPEAR.
00102 !
00103 ! 500-577 Reserved by DEC for use with programs other than SPEAR.
00104 !
00105 ! 600-677 Reserved for customer use with programs other than
00106 ! SPEAR.
00107 !
00108 ! 700-777 Reserved for both DEC and customer use with control
00109 ! over the system event file.
00110 !
00111 ! In some cases (mostly for event-file control), only the first word (HDRCOD)
00112 ! is included in the header. This identification is the minimum required for
00113 ! any entry. The current event codes used for file control are as follows:
00114 !
00115 ! 377 The recording program has detected an error in the file
00116 ! and has started using the next sequential event file.
00117 !
00118 ! 775 This is the offset word in the first word of each block
00119 ! of the event file. RH points to the start of the first
00120 ! entry in this block.
00121 !
00122 ! 777 This number signals an end-of-file and tells SPEAR to
00123 ! look for the next file.
00124 !
00125 !--
00126
00127 !++
00128 !
00129 ! TOPS-10 / TOPS-20 HEADER DEFINITIONS
00130 !
00131 !--
00132
00133 HEADER TOPS10 TOPS20
00134 HEADER
00135 HDR_WRD_0 0 0-35 ! Header word 0
00136 ENTRY_TYPE 0 0-8 ! TOPS-10 / TOPS-20 entry type
00137 ! Unused 0 9-14 ! Reserved
00138 RETRIEVE_EXTRACT 0 15 ! Entry extracted by RETRIEVE
00139 CRASH_EXTRACT 0 16 ! Entry extracted from a crash
00140 TOPS20_REC 0 17 ! Entry recorded by TOPS-20
00141 BODY_FORMAT 0 18-20 ! 0 before TOPS-20 v5
00142 ! 1 with TOPS-20 v5
00143 HDR_FORMAT 0 21-23 ! 1 before TOPS-10 v7.02
00144 ! 2 with TOPS-10 v7.02
00145 HDR_LENGTH 0 24-26 ! 4 for Header format 1
00146 ! 5 for Header format 2
00147 ENTRY_LENGTH 0 27-35 ! Length of MAIN entry excluding HEADER
00148 ENTRY_DATE_TIME 1 0-35 ! Date/Time in universal format
00149 ! LH = Days since 17 Nov 1858
00150 ! RH = Fractional part of day
00151 ! TOPS-10 Local reference
00152 ! TOPS-20 GMT reference
00153 SYS_UPTIME 2 0-35 ! Time since the system started in
00154 ! universal format
00155 SYS_SER_NUM 3 0-35 ! System serial number (decimal)
00156 RDFILE_SEQNUM 4 0 ! Sequence # was generated by RDFILE
00157 ! Unused 4 1-8 ! Reserved - 0
00158 SEQUENCE_NUMBER 4 9-35 ! Unique record sequence number
00159 END HEADER
00160
00161 HEADER TOPS10 TOPS20
00162 _HEADER ! Header for secondary buffer
00163 _HDR_WRD_0 0 0-35 ! Header word 0
00164 _ENTRY_TYPE 0 0-8 ! TOPS-10 / TOPS-20 entry type
00165 ! Unused 0 9-14 ! Reserved
00166 _RETRIEVE_EXTRACT 0 15 ! Entry extracted by RETRIEVE
00167 _CRASH_EXTRACT 0 16 ! Entry extracted from a crash
00168 _TOPS20_REC 0 17 ! Entry recorded by TOPS-20
00169 _BODY_FORMAT 0 18-20 ! 0 before TOPS-20 v5
00170 ! 1 with TOPS-20 v5
00171 _HDR_FORMAT 0 21-23 ! 1 before TOPS-10 v7.02
00172 ! 2 with TOPS-10 v7.02
00173 _HDR_LENGTH 0 24-26 ! 4 for Header format 1
00174 ! 5 for Header format 2
00175 _ENTRY_LENGTH 0 27-35 ! Length of MAIN entry excluding HEADER
00176 _ENTRY_DATE_TIME 1 0-35 ! Date/Time in universal format
00177 ! LH = Days since 17 Nov 1858
00178 ! RH = Fractional part of day
00179 ! TOPS-10 Local reference
00180 ! TOPS-20 GMT reference
00181 _SYS_UPTIME 2 0-35 ! Time since the system started in
00182 ! universal format
00183 _SYS_SER_NUM 3 0-35 ! System serial number (decimal)
00184 _RDFILE_SEQNUM 4 0 ! Sequence # was generated by RDFILE
00185 ! Unused 4 1-8 ! Reserved - 0
00186 _SEQUENCE_NUMBER 4 9-35 ! Unique record sequence number
00187 END HEADER
00188
00189 !++
00190 ! The following entries are recorded by TOPS-10 via
00191 ! the DAEMON program. These define the body portion of
00192 ! the entry.
00193 !--
00194
00195 !++
00196 !
00197 ! Reload information recorded by TOPS-10 systems whether or not
00198 ! an error occurred.
00199 !
00200 !--
00201
00202 ENTRY TOPS10
00203 001 SYSTEM_RELOAD_10
00204 SYS_NAME 0 0-35 !System name in ASCIZ (5 words 0:4).
00205 SYS_BUILD_DATE 5 0-35 !System build date in ASCIZ (2 words 5:6).
00206 SYS_STATES_WORD 7 0-35 !Bits indicating software state.
00207 MONITOR_VERSION 8 0-35 !Funny format showing major, minor
00208 !version, and edit number.
00209 CPU_SERIAL_NUMBER 9 0-35 !CPU which reloaded system as opposed
00210 !to CPU logging an error.
00211 WHY_RELOAD_CODE 10 0-35 !Major reason-type supplied by operator
00212 !when reloading. (SIXBIT)
00213 OPERATOR_COMMENTS 11 0-35 !Additional comments on why reloaded.
00214 UNLIKELY_CODE 12 0-17 !Just a 707070 for validity-check.
00215 !Undefined 12 18-34
00216 BIT_PER_PAGE_FLAG 12 35 !Flag for NXM table.
00217 NXM_TAB 13 HEAD-F !Pointer to NXM table.
00218 END ENTRY
00219
00220 !++
00221 !
00222 ! Information from TOPS-10 when a recoverable stopcode is detected.
00223 !
00224 !--
00225
00226 ENTRY TOPS10
00227 002 MONITOR_BUG_DATA_10
00228 SYS_NAME 0 0-35 !System name in ASCIZ (five words 0:4)
00229 SYS_BUILD_DATE 5 0-35 !System build date in ASCIZ (2 words 5:6)
00230 CPU_SERIAL_NUMBER 7 0-35 !CPU which detected error.
00231 MONITOR_VERSION 8 0-35 !Funny format showing major, minor
00232 !version, and edit number.
00233 STOP_BUG_NAME 9 0-35 !Stopcode name in SIXBIT.
00234 JOB_NUMBER 10 0-35 !Job active at time of occurrance.
00235 TERMINAL_NUMBER 11 0-35 ! Terminal of job.
00236 PROGRAM_NAME 12 0-35 ! Name of job user was running.
00237 USER_ID 13 0-35 ! PPN of user.
00238 JOB_STOP_TALLY 14 0-35 !Total number of JOB STOPCDS.
00239 CHECK_TALLY 15 0-35 !Total number of DEBUG STOPCDS.
00240 SAVED_ACS 16 BODY-F !Contents of AC at time of error.
00241 !WORDS 16-31
00242 PI_STATUS 32 0-35 !CONI PI at time of STOPCODE.
00243 END ENTRY
00244
00245 !++
00246 ! Obsolete CPU memory parity error entry for KA10, KI10
00247 !--
00248
00249 ENTRY TOPS10
00250 003 OLD_CPU_MEM_PAR_ERR_10 !Obsolete
00251 CPU_NAME 0 0-35 !Name of device in SIXBIT
00252 TOTAL_SINCE_RELOAD 1 0-35 !Count of NXMs.
00253 SPUR_SINCE_RELOAD 2 0-35 !Count of spurious NXMs.
00254 CONTINUE_COUNT 3 0-35 !Number of continues after MPE halts
00255 PROGRAM_COUNTER 4 0-35 !PC at MPE interrupt
00256 FIRST_CONTENTS 5 0-35 !Of this sweep.
00257 FIRST_ADDRESS 6 0-35 !Of this sweep.
00258 PAR_SWEEP_DATA 7 HEAD-F !pointer to %CCPAR sub-table.
00259 TOP_TEN,_BAD_ADD 8 HEAD-F !Pointer to %CCMPT sub-table.
00260 USER_ID 9 0-35 !PPN of user running at interrupt
00261 PROGRAM_NAME 10 0-35 !In SIXBIT
00262 END ENTRY
00263
00264 !++
00265 ! Obsolete NXM error interrupt for KA10 and KI10
00266 !--
00267
00268 ENTRY TOPS10
00269 004 OLD_CPU_NXM_ERR_10 !Obsolete
00270 CPU_NAME 0 0-35 !Physical CPU name in SIXBIT
00271 TOTAL_SINCE_RELOAD 1 0-35 !Count of NXMs.
00272 SPUR_SINCE_RELOAD 2 0-35 !Count of spurious NXMs.
00273 PROGRAM_COUNTER 3 0-35 !PC at NXM interrupt
00274 JOB_AFFECTED_COUNT 4 0-35 !Number of jobs affected by NXM
00275 FIRST_ADDRESS 5 0-35 !Physical address of NXM
00276 LAST_ADDRESS 4 0-35 !Of this sweep.
00277 RELATIVE_ADDRESS 7 0-35 !Relative address of NXM in segment
00278 TOTAL_THIS_SWEEP 8 0-35 !# of NXM's seen on last sweep
00279 TOTAL_SWEEPS 9 0-35 !Number of sweeps looking for NXM's
00280 ENABLED_COUNT 10 0-35 !# Of user enabled NXM's
00281 ADDRESS_AND 11 0-35 !Logical and of bad addresses.
00282 ADDRESS_OR 12 0-35 !Logical OR or bad addresses.
00283 SEEN_BY_CHANNEL 13 0-35 !Count of NXMs seen by channel.
00284 UNLIKELY_CODE 14 0-17 !Just a 707070 for validity-check.
00285 !Undefined 14 18-34
00286 BIT_PER_PAGE_FLAG 14 35 !Flag for NXM table.
00287 NXM_TAB,_BEFORE_ERR 15 HEAD-F !PTR TO NXM TABLE BEFORE ERROR
00288 NXM_TAB,_AFTER_ERR 16 HEAD-F !PTR TO NXM TABLE AFTER ERROR
00289 TOP_TEN,_BAD_ADD 17 HEAD-F !PTR TO LIST OF NXM ADDRESSES
00290 USER_ID 18 0-35 ! PPN of user.
00291 PROGRAM_NAME 19 0-35 ! Name of job user was running.
00292 END ENTRY
00293
00294 !++
00295 ! Information extracted from a TOPS-10 crash. Names are meaningful
00296 ! to monitor programmers and are left in their original condition.
00297 !--
00298
00299 ENTRY TOPS10
00300 005 EXTRACTED_CRASH_INFO_10
00301 CRASH_STR 0 0-35 !STR name for source of CRASH.EXE
00302 CINSEC 1 0-35 !System wide error count
00303 CINPTR 2 0-35 !Pntr for GETTABS
00304 CINTIM 3 0-35 !Time of day
00305 CINSIZ 4 0-35 !system memory size
00306 CINPOK 5 0-35 !last addr poked
00307 CINLNM 6 0-35 !# jobs logged in
00308 CINTIC 7 0-35 !# ticks per second
00309 CINVER 8 0-35 !monitor version
00310 CINDBG 9 0-35 !DEBUG status word
00311 CINHSO 10 0-35 !Start of monito high seg
00312 CINNWC 11 0-35 !# of words of core
00313 CINUPT 12 0-35 !Uptime in ticks
00314 CINMMS 13 0-35 !Memory size
00315 CINTPE 14 0-35 !Totlal mem par errors
00316 CINSPE 15 0-35 !Total spurious parity errors
00317 CINMPC 16 0-35 !Multiple parity errors
00318 CINMPA 17 0-35 !Last parity addr
00319 CINMPW 18 0-35 !Last parity word
00320 CINMPP 19 0-35 !Last parity PC
00321 CINEPO 20 0-35 !# UNREC EXEC PDL OV
00322 CINEPP 21 0-35 !# RECOVERED EXEC PDL OV
00323 CINERC 22 0-35 !SWAP ERROR COUNT
00324 CINDEL 23 0-35 !DISABLED ARDWARE ERROR COUNT
00325 CINSPC 24 0-35 !LAST STOPCD
00326 CINNDS 25 0-35 !# DEBUG STOPCDS
00327 CINNJS 26 0-35 !# JOB STOPCDS
00328 CINSJN 27 0-35 !LAST STOPCD-JOB NUMBER
00329 CINSPN 28 0-35 !LAST STOPCD-PROGRAM NAME
00330 CINSUU 29 0-35 !LAST STOPCD-UUO
00331 CINSPP 30 0-35 !LAST STOPCD-PPN
00332 CINPAR 31 0-35 !PARITY SUBTABLE
00333 CINPLA 32 0-35 !**HIGHEST ADDR OF PARITY ERROR
00334 CINPMR 33 0-35 !**ADDRES IN SEGMENT OF PAR ERR
00335 CINPTS 34 0-35 !**PAR ERRORS THIS SWEEP
00336 CINPSC 35 0-35 !**#SWEEPS
00337 CINPUE 36 0-35 !**USER ENABLED
00338 CINPAA 37 0-35 !**LOGICAL AND OF ADDR
00339 CINPAC 38 0-35 !**LOGICAL AND OF WORDS
00340 CINPOA 39 0-35 !**LOG OR OF ADDR
00341 CINPOC 40 0-35 !**LOG OR OF DATA
00342 CINPCS 41 0-35 !**COUNT OF SPUR CHANNEL ERROS
00343 CINRSP 42 0-35 !ADDR OF RESPONSE SUBTABLE
00344 CINRSO 43 0-35 !**SUM TTY OUT UUO RES
00345 CINRNO 44 0-35 !**NUM TTY OUT UUO
00346 CINRHO 45 0-35 !**HI-SUM SQ TTY OUT UUO
00347 CINRLO 46 0-35 !**LO-SUM " "
00348 CINRSI 47 0-35 !**SUM TTY INP UUO
00349 CINRNI 48 0-35 !**NUMBER TTY INP UUO
00350 CINRHI 49 0-35 !**HI-SUM SQ TTY INP UUO
00351 CINRLI 50 0-35 !**LO-SUMSQ TTY INP UUO
00352 CINRSR 51 0-35 !**SUM QUANTUM REQ RES
00353 CINRNR 52 0-35 !**NUMBER QUANTUM REQ RES
00354 CINRHR 53 0-35 !**HI-SUM SQ QUANTUM RES
00355 CINRLR 54 0-35 !**LO-SUM SQ QUANTUM REQ RES
00356 CINRSX 55 0-35 !**SUM ONE OF ABOVE
00357 CINRNX 56 0-35 !**NUMBER ONE OF ABOVE
00358 CINRHX 57 0-35 !** HI-SUM SQ ONE OF ABOVE
00359 CINRLX 58 0-35 !**LO-SUM SQ ONE OF ABOVE
00360 CINRSC 59 0-35 !**SUM CPU RES
00361 CINRNC 60 0-35 !**NUMBER CPU RES
00362 CINRHC 61 0-35 !**HI-SUM CPU RES
00363 CINRLC 62 0-35 !**LO-SUM CPU RES
00364 CINUPT 63 0-35 !UPTIME
00365 CINLST 64 0-35 !LOST TIME
00366 CINNUL 65 0-35 !NULTIME
00367 CINOHT 66 0-35 !OVERHEAD TIME IN JIFFIES
00368 CINTUC 67 0-35 !TOTAL UUO COUNT
00369 CINTJC 68 0-35 !TOTAL JOB CONTEXT SWITCH COUNT
00370 CINTNE 69 0-35 !TOTAL NXM
00371 CINSNE 70 0-35 !TOTAL SPUR NXM
00372 CINNJA 71 0-35 !# JOBS AFFECTED LAST NXM
00373 CINMNA 72 0-35 !FIRST ADDR LAST NXM
00374 CINUNI 73 0-35 !CNT OF DISK INFO BLOCKS IN THIS ENTRY
00375 END ENTRY
00376
00377 !++
00378 ! Channel information (DF10) for non-massbus DMA devices
00379 ! (Not supported by SPEAR)
00380 !--
00381
00382 ENTRY TOPS10
00383 006 CHANNEL_ERROR_REPORT_10
00384 DEVICE_NAME 0 0-35 !DEVICE USING CHAN AT ERROR IN SIXBIT
00385 NXM_OVRN_COUNT 1 0-35 !# OF NXM'S AND OVERRUNS FOR THIS CHAN
00386 CHN_MEM_PAR_COUNT 2 0-35 !# OF MPE'S FOR THIS CHAN
00387 CHN_DEV_PAR_COUNT 3 0-35 !# OF DEVICE DPE'S FOR THIS CHAN
00388 INITIAL_CONTROL_WORD 4 0-35 !INITIAL CONTROL WORD
00389 TERMINATION_WORD 5 0-35 !TERMINATION WORD
00390 LAST_CW_MINUS_2 6 0-35 !FINAL CONTROL WD -2
00391 LAST_CW_MINUS_1 7 0-35 !FINAL CONTROL WD -1
00392 LAST_CW 8 0-35 !FINAL CONTROL WD
00393 LAST_DATA_MINUS_2 9 0-35 !LAST DATA WD -2
00394 LAST_DATA_MINUS_1 10 0-35 !LAST DATA WD -1
00395 LAST_DATA 11 0-35 !LAST DATA WD
00396 EXPECTED_TERMINATION 12 0-35 !EXPECTED TERMINATION WD
00397 END ENTRY
00398
00399 !++
00400 ! Time stamp indicating DAEMON has started running
00401 !--
00402
00403 ENTRY TOPS10
00404 007 DAEMON_STARTED_10
00405 DAE_VERSION 0 0-35 !DAEMON version
00406 END ENTRY
00407
00408 !++
00409 ! Information about an error in a non-massbus DMA device in TOPS-10
00410 ! (Not supported in SPEAR). This applies to RP10 and RC10 controllers.
00411 !--
00412
00413 ENTRY TOPS10
00414 010 OLD_DISK_ERR_10
00415 HDENAM 0 0-35 !PHYSICAL UNIT NAME IN SIXBIT
00416 HDEHID 1 0-35 !HOME BLOCK ID(PACK ID)
00417 HDEHCT 2 0-35 !# OF HARD ERRORS ON THIS UNIT
00418 HDESCT 3 0-35 !# OF SOFT ERRORS ON THIS UNIT
00419 HDEECT 4 0-35 !LH = 1B0 IF LATER WON 1ST TIME
00420 ! = 1B1 IF ERROR WAS HARD
00421 ! = 1B2 IF HUNG DEVICE
00422 !RH = # OF RETRIES
00423 HDESOF 5 0-35 !STATUS AT ERROR
00424 CONI_RP10 5 0-35 !Used by SUMMARIZE
00425 HDEERR 6 0-35 !STATUS AFTER RETRY WHICH WON
00426 HDESDI 7 0-35 !DATAI AT ERROR
00427 HDEHDI 8 0-35 !DATAI AFTER RETRY WHICH WON
00428 HDEHBN 9 0-35 !LOGICAL BLOCK NUMBER OF ERROR
00429 HDEMCT 10 0-35 !SOFTWARE DETECTED ERROR CNTS
00430 UNISER 10 0-11 !sat errors
00431 UNIRER 10 12-23 !RIB ERRORS
00432 UNICER 10 24-35 !CHECKSUM ERRORS
00433 HDEPCT 11 0-35 !# OF SEEK INCOMPLETES
00434 HDEHNG 12 0-35 !# OF UNIT HUNGS
00435 UNINTH 12 0-8 !# OF NTHUNG
00436 UNITHU 12 9-17 !# OF THUNG
00437 UNIPHU 12 18-26 !# OF PHUNG
00438 UNISHU 12 27-35 !# OF SHUNG
00439 HDETRC 13 0-35 !# OF BLOCKS READ ON THIS UNIT
00440 HDETWC 14 0-35 !# OF BLOCKS WRITTEN ON THIS UNIT
00441 HDETSC 15 0-35 !# OF SEEKS ON THIS UNIT
00442 HDEDCR 16 0-35 !RESULTS OF A DSKCHR UUO FOR THIS UNIT
00443 CONTROLLER_TYPE 16 21-26 ! As follows
00444 ! 1 -- RC10
00445 ! 2 -- RP10
00446 CONTROLLER_NUMBER 16 27-29
00447 UNIT_TYPE 16 30-32 ! As follows
00448 ! CONTROLLER UNIT TYPE
00449 ! FIELD FIELD
00450 ! 1 0 RD10
00451 ! 1 1 RM10B
00452 ! 2 1 RP02
00453 ! 2 2 RP03
00454 HDELOG 17 0-35 !LOGICAL NAME IN SIXBIT
00455 HDECCT 18 0-35 !LH = # OF SLOTS LEFT IN BAT
00456 ! RH = # OF CHAN TERM WD FAILURES
00457 HDEFIL 19 0-35 !FILE NAME IN SIXBIT
00458 HDEEXT 20 0-35 !FILE EXTENTION IN SIXBIT
00459 HDEUID 21 0-35 !PPN OF USER
00460 HDEPGM 22 0-35 !PROGRAM NAME IN SIXBIT
00461 END ENTRY
00462
00463 WORD_10 TOPS10 ! From above
00464 CONI_RP10
00465 RP10_CTL_PAR 14 ! Control word parity error
00466 RP10_SEC_PAR 15 ! Sector parity error
00467 RP10_MEM_PAR 16 ! Channel data parity error
00468 RP10_WRD_PAR 17 ! Disk word parity error
00469 RP10_PWR_FAL 20 ! Power fail
00470 RP10_SRH_ERR 21 ! Search error
00471 RP10_OVR_RUN 22 ! Overrun (data late)
00472 RP10_NXM 23 ! No such memory
00473 RP10_NOT_RDY 25 ! Not ready
00474 RP10_ILL_WRT 26 ! Illegal write
00475 RP10_ILL_DTO 27 ! Illegal DATAO
00476 RP10_SEC_ADD 28 ! Sector address error
00477 RP10_SUR_ADD 29 ! Surface address error
00478 END WORD_10
00479
00480
00481 !++
00482 !
00483 ! TOPS-10 - ERROR CODE 11 ENTRY - Massbus device error
00484 !
00485 !--
00486
00487 ENTRY TOPS10
00488 011 MASSBUS_ERR_10
00489 DEV_NAM 0 0-35 ! Device name (SIXBIT)
00490 VOL_ID 1 0-35 ! Media identification (SIXBIT)
00491 STR_NAME 2 0-35 ! Structure ID (SIXBIT)
00492 LBN 3 0-35 ! Logical block number
00493 FINAL_ERR_STATE 4 0-35 ! Final error state from TOPS-10
00494 HARD 4 1 ! Hard error - non-recoverable
00495 SUM_HARD 4 1 ! Used by summary to indicate hard/soft
00496 HUNG_DEVICE 4 2 !
00497 ! Unknown 4 3-4 !
00498 CHAN_ADDR 4 5-11 ! Physical controller addr
00499 RH_CHAN_TYPE 4 12-14 ! Controller type (001 = RH10)
00500 CTRL_NUMBER 4 15-17 ! Controller number
00501 RETRY_CNT 4 18-35 ! # of retries performed for this error
00502 CONI_INITIAL 5 0-35 ! Controller status at error
00503 RHCS2_ERR 5 2-17 ! Control and Status 2 for RH11
00504 RHCS1_ERR 5 20-35 ! Control and Status 1 for RH11
00505 CONI_FINAL 6 0-35 ! Controller status at end
00506 SAT_ERRORS 7 0-11 ! SAT error count {
00507 RIB_ERRORS 7 12-23 ! RIB error count { UNIMCT
00508 CHKSM_ERRORS 7 24-35 ! Checksum error count {
00509 SEEK_INC_CNT 8 18-35 ! Seek imcomplete count - UNIPCT
00510 NTHUNG_CNT 9 0-8 ! NTHUNG count {
00511 THUNG_CNT 9 9-17 ! THUNG count { UNIHNG
00512 PHUNG_CNT 9 18-26 ! PHUNG count {
00513 SHUNG_CNT 9 27-35 ! SHUNG count {
00514 FILE_NAME 10 0-35 ! File name (SIXBIT)
00515 ! Unused 11 0-17 !
00516 FILE_NAME_EXT 11 18-35 ! File name extension (SIXBIT)
00517 PROJ_PROG_NO 12 0-35 ! LH - Project number
00518 ! RH - Programmer number
00519 PROGRAM_RUN 13 0-35 ! Program name (SIXBIT)
00520 RH_DATI_TCR_ERR 14 0-35 ! DATAI from RH10 control reg
00521 ! at error time
00522 UBA_STATUS_ERR 14 18-35 ! IF RH11
00523 RH_DATI_TCR_END 15 0-35 ! DATAI from RH10 control reg
00524 ! after last retry
00525 RH_DATI_BAR_ERR 16 0-35 ! DATAI from RH10 block address
00526 ! register at error time
00527 RH_DATI_BAR_END 17 0-35 ! DATAI from RH10 block address
00528 ! register after last retry
00529 MB_DEV, ICE_REG 18 BODY-F ! ***** MB REGISTERS *****
00530 ! 18 - 33
00531 ! Unused 34 0-17 !
00532 LAST_CMD 34 18-35 ! Last command issued to unit
00533 ! before error occurred
00534 ! Unknown 35 0-8 !
00535 BAT_FREE 35 9-17 ! # of free slots left in BAT block
00536 ! 777 = Unknown
00537 ! Unknown 35 18-26 !
00538 CCW_FAIL_CNT 35 27-35 ! # of CCW termination word failures
00539 END ENTRY
00540
00541 !++
00542 !
00543 ! TOPS-10 - ERROR CODE 12 ENTRY - DX20 ERROR
00544 !
00545 !--
00546
00547 ENTRY TOPS10
00548 012 DX20_ERR_10
00549 DEV_NAM 0 0-35 !device name
00550 MEDIAID 1 0-35 !media identification
00551 CHAN_ADDR 2 0-17 ! channel address
00552 CHAN_TYPE 2 18-26 ! CHANNEL TYPE
00553 DEV_TYPE 2 27-35 !device type
00554 ERR_LOCATION 3 0-35 !location of error
00555 !file,,record
00556 FILE_IN_ERROR 3 0-17 !FILE IN ERROR
00557 RECORD_IN_ERROR 3 18-35 ! RECORD IN ERROR
00558 FINAL_ERR_STATE 4 0-35 !final error state
00559 SUM_HARD 4 1
00560 NON_RECOVERABLE 4 1 ! nonrecoverable error
00561 CTRL_ADDR 4 5-11 !physical controller addr
00562 CTRL_TYPE 4 12-14 !controller type
00563 CTRL_NUMBER 4 15-17 !controller number
00564 RETRY_CNT 4 18-35 !retry error count
00565 CONI_INITIAL 5 0-35 !controller status at error
00566 CONI_FINAL 6 0-35 !controller status at end
00567 FRAMES_READ 8 0-35 !no. of frames read
00568 FRAMES_WRITTEN 9 0-35 !no. of frames written
00569 FILE_NAME 10 0-35 !file name
00570 USER 11 0-35 ![P,PN] of user making request
00571 PROGRAM_RUN 12 0-35 !program name
00572 RH_DATI_TCR_ERR 13 0-35 !datai from RH control reg at
00573 !error time
00574 RH_DATI_TCR_END 14 0-35 !datai from RH control reg
00575 !at end of retry
00576 RH_DATI_BAR_ERR 15 0-35 !datai from RH block address
00577 !register at error time
00578 RH_DATI_BAR_END 16 0-35 !datai from RH block address
00579 !register at end of retry
00580 SOFT_READ 17 0-35 ! soft read errors
00581 SOFT_WRITE 18 0-35 ! SOFT WRITE ERROR
00582 HARD_READ 19 0-35 ! HARD READ ERROR
00583 HARD_WRITE 20 0-35 ! HARD WRITE ERROR
00584 FILE_POSITION 21 0-35 !
00585 ERR_RECORD 22 0-35 !
00586 CHAN_LOGOUT_0 23 0-35 !
00587 CHAN_LOGOUT_1 24 0-35 !
00588 CHAN_LOGOUT_2 25 0-35 !
00589 CCW1 26 0-35 !
00590 CCW2 27 0-35 !
00591 MPE_CNT 28 0-35 !
00592 NXM_CNT 29 0-35 !
00593 SOFT_POS_ERR 30 0-35 ! SOFT POSITIONING ERRORS
00594 HARD_POS_ERR 31 0-35 ! HARD POSITIONING ERRORS
00595 OVERRUN_ERR 32 0-35 !
00596 INIT_CNTRL_REG 33 0-35 ! INITIAL CONTROL REGISTER
00597 MICRO_CODE_VER_NO 34 0-35 !
00598 ! ***** POINTERS TO SUB-BLOCKS *****
00599 DX20_MASSBUS_REG 35 MAIN+F ! Pointer to MASSBUS registers
00600 ! +LENGTH,,OFFSET
00601 DX20_DEVICE_REG 36 MAIN+F ! Pointer to device registers
00602 ! +LENGTH,,OFFSET
00603 END ENTRY
00604
00605 !++
00606 ! Information recorded by TOPS-10 when a significant software event
00607 ! takes place. May or may not be an error.
00608 !--
00609
00610 ENTRY TOPS10
00611 014 SOFTWARE_EVENT_10
00612 EVENT_CODE 0 0-35 !EVENT CODE
00613 JOB_NUMBER 1 0-35 !JOB NUMBER
00614 USER_ID 2 0-35 !USERS PPN
00615 PROGRAM_NAME 3 0-35 !PROGRAM NAME IN SIXBIT
00616 TERMINAL_LOC 4 0-35 !TTY LOCATION
00617 NODE_NUMBER 4 0-11 !OCTAL NODE #
00618 LINE_NUMBER 4 12-23 !OCTAL LINE #
00619 TERMINAL_NUMBER 4 24-35 !OCTAL TTY #
00620 DATA_POINTER 5 0-35 !POINTER TO DATA
00621 !- # OF ITEMS,,OFFSET FROM SWECOD
00622 END ENTRY
00623
00624 !VALUES
00625 ! SWECOD
00626 ! SWEPOK 1 !EVENT WAS A POKE
00627 ! SWESNP 2 !EVENT WAS A SNOOP
00628 ! SWETRP 3 !EVENT WAS A TRPSET
00629 ! SWERTT 4 !EVENT WAS A RTTRAP
00630 ! SWEMS1 5 !MISC. EVENT 1
00631 ! SWEMS2 6 !MISC. EVENT 2
00632 !END VALUES
00633
00634 !++
00635 ! Information recorded by TOPS-10 when some part of the configuration
00636 ! changes status. This is not an error.
00637 !--
00638
00639 ENTRY TOPS10
00640 015 CONFIG_CHANGE_10
00641 DEVICE_NAME_1 0 0-35 !SIXBIT UNIT NAME
00642 NXM_TAB,_BEFORE 0 HEAD-F !PTR TO NXM TABLE
00643 !-LENGTH,,OFFSET FROM HEADER WD 0
00644 TIME_CHANGE 0 0-35 !AMOUNT OF TIME CHANGE IN JIFFIES
00645 NODE_NUMBER 0 0-35 !NODE NUMBER
00646 DEVICE_NAME_2 1 0-35 !SIXBIT UNIT NAME
00647 NXM_TAB,_AFTER 1 HEAD-F !PTR TO NXM TABLE
00648 !-LENGTH,,OFFSET FROM HEADER WD 0
00649 DATE_TIME 1 0-35 !CURRENT DATE/TIME
00650 NODE_NAME 1 0-35 !SIXBIT NODE NAME
00651 CHANGE_REASON 2 0-11 !SIXBIT REASON ANSWER
00652 COMMAND_CODE 2 12-17 !COMMAND CODE
00653 !ATTACH = 0
00654 !DETACH = 1
00655 !EXCHANGE = 2
00656 !DATE/TIME CHANGE = 3
00657 !SET CPU OFFLINE = 4
00658 !SET CPU ONLINE = 5
00659 !NODE OFFLINE = 6
00660 !NODE ONLINE = 7
00661 !OPR SET MEM ONLINE = 10
00662 !OPR SET MEM OFFLINE = 11
00663 !MONITOR SET MEM OFFLINE = 12
00664 BIT_PER_PAGE_FLAG 2 35 !RH = 1B35 IF 1 PAGE PER BIT
00665 END ENTRY
00666
00667 !++
00668 ! System log entry
00669 !--
00670
00671 ENTRY TOPS10
00672 016 SYS_ERROR_LOG_10
00673 ERROR_LOG 0 BODY-F !
00674 END ENTRY
00675
00676 !++
00677 ! Information recorded by TOPS-10 when a temporary monitor patch
00678 ! wants to save data in the event file. This may or may not be
00679 ! an error. The programmer responsible for the patch is the only
00680 ! one who knows.
00681 !--
00682
00683 ENTRY TOPS10
00684 017 SOFTWARE_REQ_DATA_10
00685 DEBPTR 0 0-35 !PNTR WORD TO SAVED DATA
00686 !-LENGTH,,OFFSET FROM HEADER WD 0
00687 END ENTRY
00688
00689 !++
00690 ! Obsolete entry for older versions of TOPS-10 (before 6.02) when
00691 ! a tape error is detected.
00692 !--
00693
00694 ENTRY TOPS10
00695 020 OLD_TAPE_ERR_10
00696 MAGNAM 0 0-35 !DEVICE NAME IN SIXBIT
00697 MAGRID 1 0-35 !REELID IN SIXBIT
00698 MAGFFB 2 0-35 !# OF FILES FROM BOT AT ERROR
00699 MAGRFF 3 0-35 !# OF RECORDS FROM LAST EOF AT ERROR
00700 MAGICC 4 0-35 !CONI MTC AT ERROR
00701 MAGICS 5 0-35 !CONI MTS AT ERROR
00702 MAGFCC 6 0-35 !CONI MTC AFTER RETRY
00703 MAGFCS 7 0-35 !CONI MTS AFTER RETRY
00704 MAGRTC 8 0-35 !LH = 1B1 IF NON-RECOVERABLE
00705 !RH = RETRY COUNT
00706 MAGMED 9 0-35 !-1 IF TENTH ERROR SINCE LAST UNLOAD
00707 END ENTRY
00708
00709 !++
00710 !
00711 ! ERROR CODE 21 ENTRY tape error
00712 !
00713 !--
00714
00715 ENTRY TOPS10
00716 021 TAPE_ERR_10
00717 DEV_NAM 0 0-35 ! LOGICAL NAME OF DEVICE (SIXBIT)
00718 MEDIAID 1 0-35 ! TAPE REEL IDENTIFICATION
00719 ! FROM THE /REEL ID: PART OF MOUNT
00720 ! COMMAND. (SIXBIT)
00721 FILE_IN_ERROR 2 0-35 ! NUMBER OF FILES FROM BOT AT ERROR
00722 RECORD_IN_ERROR 3 0-35 ! NUMBER OF RECORDS FROM LAST EOF
00723 ! AT ERROR
00724 CNTRLLER_REG 4 0-35 ! RETRY WORD - GIVES THE INFO
00725 ! REGARDING TYPE OF MASSBUS AND
00726 ! TAPE CONTROLLER NUMBER
00727 SUM_HARD 4 1 ! LH = 1B1 IF NON-RECOVERABLE
00728 HARD 4 1 !
00729 RH20_FLAG 4 11 ! 1B11 IF RH20
00730 CONTROLLER_TYPE 4 12-14 ! BITS 11 12 13 14
00731 ! 0 0 0 0 = TM10A
00732 ! 0 0 0 1 = TM10B
00733 ! 0 0 1 0 = TC10C
00734 ! 0 0 1 1 = DX10
00735 ! 0 1 0 0 = RH10-TM02
00736 ! 0 1 0 1 = RH11-TM02
00737 ! 0 1 1 1 = TM78
00738 ! 1 1 0 0 = RH20-TM02
00739 ! 1 1 1 0 = RH20-DX20
00740 ! 1 1 1 1 = RH20-TM78
00741 ! RH = RETRY COUNT
00742 !
00743 FRAME_IN_ERR 5 0-35 ! NUMBER OF TAPE FRAMES/CHARACTERS
00744 ! INTO RECORD WHEN ERROR OCCURRED
00745 REG_BEFORE_ERR 6 0-35 ! BITS 18-36 GIVE THE NUMBER OF
00746 ! FILES FROM BOT BEFORE ERROR
00747 ! AND BITS 0-17 GIVE
00748 ! THE NUMBER OF RECORDS FROM
00749 ! LAST EOF BEFORE ERROR
00750 FINAL_ERR_STATUS 7 0-35 ! FINAL ERROR STATUS
00751
00752 CSB_TM10, _AT_ERR 8 HEAD-F ! Pointers to controller status block
00753 CSB_TM78, _AT_ERR 8 HEAD-F ! Pointers to controller status block
00754 CSB_DX10, _AT_ERR 8 HEAD-F ! Pointers to controller status block
00755 CSB_TM02, _AT_ERR 8 HEAD-F ! at error - - in the form
00756 ! -LENGTH,,OFFSET FROM HEADER WORD 0
00757 CSB_TM10, _AT_END 9 HEAD-F ! Pointers to controller status
00758 CSB_TM78, _AT_END 9 HEAD-F ! Pointers to controller status
00759 CSB_DX10, _AT_END 9 HEAD-F ! Pointers to controller status
00760 CSB_TM02, _AT_END 9 HEAD-F ! block after retry - - in the form
00761 ! -LENGTH,,OFFSET FROM HEADER WORD 0
00762 PPN 10 0-35 ! USER'S PROJECT/PROGRAMMER NO.
00763 PROGRAM_NAME 11 0-35 ! USER'S PROGRAM NAME WHEN ERROR
00764 ! OCCURRED
00765 ! Additional TU78 definitions
00766 REV_LEVEL_0_3 12 0-35 ! Next 2 words are 9-bit bytes
00767 REV_LEVEL_4_7 13 0-35
00768 CONI_AT_ERR 14 0-35
00769
00770 END ENTRY
00771
00772 !++
00773 ! TOPS-10 front-end entry
00774 !--
00775
00776 ENTRY TOPS10
00777 030 FE_DEVICE_ERR_10
00778 FE_DATA 0 BODY-F !Common FE table data
00779 END ENTRY
00780
00781 !++
00782 ! Information saved by TOPS-10 when the front end is reloaded.
00783 !--
00784
00785 ENTRY TOPS10
00786 031 FE_RELOAD_10
00787 FERNUM 0 0-35 !LH = CPU #
00788 !RH = DTE #
00789 !1B0 = MASTER DTE BIT
00790 FERSTS 1 0-35 !RELOAD STATUS
00791 !1B0 = LOG REQUEST
00792 !1B2 = DUMP FAILED
00793 !1B3 = TO 10 ERROR DURING DUMP
00794 !1B4 = TO 11 ERROR PASSING BOOTSTRAP
00795 !1B6 = RELOAD FAILED
00796 !1B7 = POWER FAIL DID NOT SET
00797 !1B8 = POWER FAIL DID NO CLEAR
00798 !1B9 = ROM DID NOT SEND A DOORBELL
00799 !1B10 = BOOT DIDN'T MAKE IT TO THE 11
00800 !1B11 = 11 ROM DIDN'T CLR TO 11 DOORBELL
00801 !1B12 = TO 10 BYTE XFR FOR DUMP HUNG
00802 !1B13 = ENTER FAILURE FOR DUMP FILE
00803 !1B14 = OPEN FAILURE FOR DUMP DEVICE
00804 !1B15 = OUTPUT FAILURE FOR DUMP FILE
00805 !1B16 = TO 11 BYTE XFER TIMED OUT
00806 !177B35 = RETRY COUNT
00807 FERFNM 2 MAIN$Z !FILE NAME STRING POINTER
00808 FERSIZ 3 0-35 !SIZE OF STRING
00809 END ENTRY
00810
00811 !++
00812 ! Information saved by TOPS-10 when the KS10 halts
00813 !--
00814
00815 ENTRY TOPS10
00816 033 KS_HALT_STATUS_10
00817 HSBCOD 0 0-35 !HALT STATUS CODE (PHYSICAL LOCATION 0 0-35
00818 HSBEPC 1 0-35 !PC AT ERROR (PHYSICAL LOCATION 1 0-35
00819 KS_HS_BLOCK 2 BODY-F !PTR TO HALT STATUS BLOCK
00820 !-LENGTH,,OFFSET FROM HSBCOD
00821 HSBCBP 3 0-35 !PTR TO CLOCK STOP BLOCK (UNUSED 0-35
00822 !-LENGTH,,OFFSET FROM HSBCOD
00823 END ENTRY
00824
00825 !++
00826 ! Obsolete set of disk statistics from TOPS-10. This is now recorded
00827 ! in entry 045.
00828 !--
00829
00830 ENTRY TOPS10
00831 040 OLD_DISK_STATS_10
00832 USCNAM 0 0-35 !DEVICE NAME IN SIXBIT
00833 USCHID 1 0-35 !HOME BLOCK ID IN SIXBIT
00834 USCHCT 2 0-35 !HARD ERROR COUNT
00835 USCSCT 3 0-35 !SOFT ERROR COUNT
00836 SEEK_INC_CNT 4 0-35 ! Seek imcomplete count - UNIPCT
00837 USCHNG 5 0-35 !HUNG COUNT
00838 THUNG_CNT 5 9-17 ! THUNG count { UNIHNG
00839 PHUNG_CNT 5 18-26 ! PHUNG count {
00840 SHUNG_CNT 5 27-35 ! SHUNG count {
00841 USCMCT 6 0-35 !SOFTWARE ERROR COUNT
00842 SAT_ERRORS 6 0-11 ! SAT error count {
00843 RIB_ERRORS 6 12-23 ! RIB error count { UNIMCT
00844 CHKSM_ERRORS 6 24-35 ! Checksum error count {
00845 USCBRC 7 0-35 !TOTAL BLOCKS READ IN BUFFERED MODE
00846 USCBWC 8 0-35 !TOTAL BLOCKS WRITTEN IN BUFFERED MODE
00847 USCDRC 9 0-35 !TOTAL BLOCKS READ IN DUMP MODE
00848 USCDWC 10 0-35 !TOTAL BLOCKS WRITTEN IN DUMP MODE
00849 USCMRC 11 0-35 !TOTAL BLOCKS READ BY MONITOR
00850 USCMWC 12 0-35 !TOTAL BLOCKS WRITTEN BY MONITOR
00851 USCICT 13 0-35 !TOTAL BLOCKS READ FOR SWAPPER
00852 USCOCT 14 0-35 !TOTAL BLOCKS WRITTEN BY SWAPPER
00853 USCMSC 15 0-35 !TOTAL SEEKS BY MONITOR
00854 USCUSC 16 0-35 !TOTAL SEEKS FOR JOBS
00855 END ENTRY
00856
00857 !++
00858 !
00859 ! TOPS-10 - ERROR CODE 41 ENTRY
00860 !
00861 !--
00862
00863 ENTRY TOPS10
00864 041 OLD_TAPE_STATS_10
00865 DEVICE_NAME 0 0-35 ! device name
00866 MEDIAID 1 0-35 ! media identification
00867 NO_FRAMES_READ 2 0-35 ! number of frames read
00868 NO_FRAMES_WRITTEN 3 0-35 ! number of frames written
00869 SOFT_READ_ERRORS 4 0-35 !
00870 HARD_READ_ERRORS 5 0-35 !
00871 SOFT_WRITE_ERRORS 6 0-35 !
00872 HARD_WRITE_ERRORS 7 0-35 !
00873 PPN 8 0-35 ! program,,programmer number
00874 USER 9 0-35 ! user making request
00875 END ENTRY
00876
00877 !++
00878 ! Tape statistics recorded by TOPS-10.
00879 !--
00880
00881 ENTRY TOPS10
00882 042 TAPE_STATS_10
00883 TPSNAM 0 0-35 !DEVICE NAME IN SIXBIT
00884 TPSRID 1 0-35 !REELID IN SIXBIT
00885 TPSWRC 2 0-35 !TOTAL # OF CHARACTERS READ
00886 TPSWWC 3 0-35 !TOTAL # OF CHARACTERS WRITTEN
00887 TPSSRE 4 0-35 !TOTAL # OF SOFT READ ERRORS
00888 TPSHRE 5 0-35 !TOTAL # OF HARD READ ERRORS
00889 TPSSWE 6 0-35 !TOTAL # OF SOFT WRITE ERRORS
00890 TPSHWE 7 0-35 !TOTAL # OF HARD WRITE ERRORS
00891 TPSPPN 8 0-35 !USER'S PPN
00892 TPSLAB 9 0-35
00893 TPSUSN 10 0-35
00894 TPSUTP 11 0-35
00895 END ENTRY
00896
00897 !++
00898 ! Disk statistics recorded by TOPS-10.
00899 !--
00900
00901 ENTRY TOPS10
00902 045 DISK_STATS_10
00903 DSCSBP 0 MAIN-F !PTR TO SUBLOCKS
00904 !-#OF BLOCKS,,OFFSET FROM DSCSBP TO 1ST
00905 END ENTRY
00906
00907 !++
00908 ! Information recorded by TOPS-10 when the DL10 communications
00909 ! subsystem detects an error.
00910 !--
00911
00912 ENTRY TOPS10
00913 050 DL_HARDWARE_ERR_10
00914 DLEPRT 0 0-35 !DL10 PORT WITH ERROR
00915 DLECNI 1 0-35 !CONI DLC
00916 DLEDTI 2 0-35 !DATAI DLC
00917 DLECN0 3 0-35 !CONI DLB R=0
00918 DLECN1 4 0-35 !CONI DLB R=1
00919 DLECN2 5 0-35 !CONI DLB R=2
00920 DLECN3 6 0-35 !CONI DLB R=3
00921 DLEDT1 7 0-35 !DATAI DLB (R=1 0-35 MB
00922 DLEPGM 8 0-35 !11 PROGRAM NAME
00923 DLESTS 9 0-35 !SOFTWARE STATUS
00924 ! DLEERR 10 0-35
00925 ! DLERHS 11 0-35
00926 ! DLECOD 12 0-35
00927 ! DLEPER 13 0-35
00928 END ENTRY
00929
00930 !++
00931 ! Obsolete parity error/NXM entry written by TOPS-1O for the
00932 ! KI10 processor.
00933 !--
00934
00935 ENTRY TOPS10
00936 051 KI_PAR_NXM_INT_10
00937 KIINAM 0 0-35 !CPU NAME IN SIXBIT
00938 KIIPCI 1 0-35 !PC AT INTERRUPT
00939 KIIAPR 2 0-35 !CONI APR AT INTERRUPT
00940 KIIPII 3 0-35 !CONI PI AT INTERRUPT
00941 KIIPPN 4 0-35 !PPN OF USER RUNNING AT INTERRUPT
00942 KIIPGM 5 0-35 !SIXBIT PROGRAM NAME OF USER RUNNING AT INTERRUPT
00943 END ENTRY
00944
00945 !++
00946 !
00947 ! The following describes the new KL-10 data parity trap
00948 ! and interrupt records for TOPS-10.
00949 !
00950 !--
00951
00952 ENTRY TOPS10
00953 052 KL_PAR_NXM_INT_10
00954 CPU_NAME 0 0-35 !In SIXBIT.
00955 PROGRAM_COUNTER 1 0-35 !At time of interrupt.
00956 APR_STATUS 2 0-35 !CONI APR at time of interrupt.
00957 PI_STATUS 3 0-35 !CONI PI shows level of error.
00958 RDERA_STATUS 4 0-35 !RDERA at time of interrupt.
00959 SBDIAG_LIST 5 HEAD-F !SBDIAGs at time of error.
00960 END ENTRY
00961
00962 !++
00963 ! Obsolete NXM trap entry written by TOPS-10 for the KS10 processor.
00964 !--
00965
00966 ENTRY TOPS10
00967 054 KS_NXM_TRAP_10
00968 KSNNAM 0 0-35 !CPU NAME IN SIXBIT
00969 KSNPCT 1 0-35 !PC AT TRAP
00970 KSNPFW 2 0-35 !PAGE FAIL WORD
00971 KSNPMA 3 0-35 !MAPPED PHYSICAL MEMORY ADDRESS AT TRAP
00972 KSNBDW 4 0-35 !BAD DATA WORD
00973 KSNPIT 5 0-35 !CONI PI AT TRAP
00974 KSNPPN 6 0-35 !PPN OF USER THAT TRAPPED
00975 KSNPGM 7 0-35 !PROGRAM NAME IN SIXBIT
00976 KSNGDW 8 0-35 !GOOD DATA WORD
00977 KSNRET 9 0-35 !RETRY WORD
00978 !1B0 =THIS IS A KS10
00979 !1B1 = NON-RECOVERABLE ERROR
00980 !27-35 = RETRY COUNT
00981 KSNNRT 10 0-35 !NUMBER OF RECOVERABLE TRAPS SINCE LAST RELOAD
00982 KSNNNT 11 0-35 !NUMBER OF NON-RECOVERABLE TRAPS SINCE LAST RELOAD
00983 END ENTRY
00984
00985 !++
00986 !
00987 ! The following describes the new KL-10 data parity trap
00988 ! and interrupt records for TOPS-10.
00989 !
00990 !--
00991
00992 ENTRY TOPS10
00993 055 KL_OR_KS_PAR_TRAP_10
00994 CPU_NAME 0 0-35 !In SIXBIT.
00995 PROGRAM_COUNTER 1 0-35 !At time of interrupt.
00996 PAGE_FAIL_WORD 2 0-35 !Includes address and PF code.
00997 PHYS_ADDRESS 3 0-35 !of trap.
00998 BAD_WORD 4 0-35 !Contents of word before recovery.
00999 PI_STATUS 5 0-35 !CONI PI shows level of error.
01000 USER_ID 6 0-35 !PPN of user at time of trap.
01001 PROGRAM_NAME 7 0-35 !of current user at time of trap.
01002 GOOD_WORD 8 0-35 !Contents of word after recovery.
01003 NOT_KL_FLAG 9 0 !Set if this is KS10.
01004 NOT_RECOVERED_FLAG 9 1 !Set by monitor when can't recover.
01005 CACHE_FAILED_FLAG 9 2 !When read from memory OK.
01006 CACHE_USE_FLAG 9 3 !Set when cache was on at time.
01007 SWEEP_FLAG 9 4 !If error during cache sweep.
01008 CACHE_DISABLED 9 5 !If cache was disabled.
01009 !undefined 9 6-17
01010 CACHE_ON_COUNT 9 18-26 !Count of errors with cache on.
01011 CACHE_OFF_COUNT 9 27-35 !Count of errors with cache off.
01012 RECOVERED_COUNT 10 0-35 !Count of recoverable trap errors.
01013 NOT_RECOVERED_COUNT 11 0-35 !Count of non-recoverable errors.
01014 END ENTRY
01015
01016 !++
01017 !
01018 ! The following describes the new KL-10 interrupt and trap
01019 ! sweep entries.
01020 !
01021 !--
01022
01023 ENTRY TOPS10
01024 056 NXM_MEMORY_SWEEP_10
01025 CPU_NAME 0 0-35 !In SIXBIT.
01026 TOTAL_SINCE_RELOAD 1 0-35 !Count of NXMs.
01027 SPUR_SINCE_RELOAD 2 0-35 !Count of spurious NXMs.
01028 FIRST_ADDRESS 3 0-35 !Of this sweep.
01029 LAST_ADDRESS 4 0-35 !Of this sweep.
01030 !obsolete for compat. 5 0-35
01031 TOTAL_THIS_SWEEP 6 0-35
01032 !same as word 1 ?? 7 0-35
01033 !obsolete for compat. 8 0-35
01034 ADDRESS_AND 9 0-35 !Logical and of bad addresses.
01035 ADDRESS_OR 10 0-35 !Logical OR or bad addresses.
01036 SEEN_BY_CHANNEL 11 0-35 !Count of NXMs seen by channel.
01037 !undefined 12 0-34
01038 BIT_PER_PAGE_FLAG 12 35 !Flag for NXM table
01039 NXM_TAB,_BEFORE_ERR 13 HEAD-F !
01040 NXM_TAB,_AFTER_ERR 14 HEAD-F !
01041 TOP_TEN,_BAD_ADD 15 HEAD-F !
01042 END ENTRY
01043
01044 ENTRY TOPS10
01045 057 PAR_MEMORY_SWEEP_10
01046 CPU_NAME 0 0-35 !In SIXBIT.
01047 TOTAL_SINCE_RELOAD 1 0-35 !Count of parity errors.
01048 SPUR_SINCE_RELOAD 2 0-35 !Count of spurious parity errors.
01049 FIRST_CONTENTS 3 0-35 !Of this sweep.
01050 FIRST_ADDRESS 4 0-35 !Of this sweep.
01051 PAR_SWEEP_DATA 5 HEAD-F !pointer to %CCPAR sub-table.
01052 TOP_TEN,_BAD_ADD 6 HEAD-F !Pointer to %CCMPT sub-table.
01053 END ENTRY
01054
01055 !++
01056 ! Obsolete entry written by TOPS-10 for the KL10 processor with
01057 ! a parity error interrupt.
01058 !--
01059
01060 ENTRY TOPS10
01061 060 OLD_CPU_PAR_INT_10
01062 KDINAM 0 0-35 !CPU NAME IN SIXBIT
01063 KDITPE 1 0-35 !# MPE'S
01064 KDISPE 2 0-35 !# SPURIOUS MPE'S
01065 KDIMPC 3 0-35 !# OF CONTINUES AFTER MPE HALTS
01066 KDIMPP 4 0-35 !PC AT MPE INTERRUPT
01067 KDIMPW 5 0-35 !CONTENTS OF 1ST BAD WD FOUND ON SWEEP
01068 KDIMPA 6 0-35 !ADDRESS OF 1ST BAD WD FOUND ON SWEEP
01069 KDIPAR 7 0-35 !AOB POINTER TO %CCPAR TABLE
01070 KDIMPT 8 0-35 !AOB POINTER TO %CCMPT TABLE
01071 KDIPPN 9 0-35 !PPN OF USER
01072 KDIPGM 10 0-35 !PROGRAM NAME
01073 KDICNI 11 0-35 !CONI APR
01074 KDIERA 12 0-35 !RDERA
01075 KDISBD 13 0-35 !PTR TO SBDIAG SUBTABLE
01076 END ENTRY
01077
01078 !++
01079 !
01080 ! The following describes the old KL-10 data parity trap
01081 ! entries on TOPS-10. (Not to be supported in ANALYZE).
01082 !
01083 !--
01084
01085 ENTRY TOPS10
01086 061 CPU_PAR_TRAP_10
01087 PAGE_FAIL_WORD 0 0-35 !At time of trap.
01088 BAD_WORD 1 0-35 !Contents of word with parity error.
01089 GOOD_WORD 2 0-35 !What the word should have been.
01090 PHYS_ADDRESS 3 0-35 !Address of parity error.
01091 !undefined 4 0
01092 NOT_RECOVERED_FLAG 4 1 !Set by monitor when can't recover.
01093 CACHE_FAILED_FLAG 4 2 !When read from memory OK.
01094 CACHE_USE_FLAG 4 3 !Set when cache was on at time.
01095 SWEEP_FLAG 4 4 !If error during cache sweep.
01096 CACHE_DISABLED 4 5 !If cache was disabled.
01097 !undefined 4 6-17 !
01098 CACHE_ON_COUNT 4 18-26 !Count of errors with cache on.
01099 CACHE_OFF_COUNT 4 27-35 !Count of errors with cache off.
01100 RECOVERED_COUNT 5 0-35 !Count of recoverable trap errors.
01101 NOT_RECOVERED_COUNT 6 0-35 !Count of non-recoverable errors.
01102 PROGRAM_COUNTER 7 0-35 !PC at time of trap.
01103 END ENTRY
01104
01105 !++
01106 !
01107 ! Old interrupt entry from TOPS-10. Not to be
01108 ! supported in ANALYZE.
01109 !
01110 !--
01111
01112 ENTRY TOPS10
01113 062 CPU_PAR_INT_10
01114 CPU_NAME 0 0-35 !In SIXBIT.
01115 MEM_PAR_ERRORS 1 0-35 !Count of memory parity errors.
01116 SPURIOUS_ERRORS 2 0-35 !Count of spurious parity errors.
01117 ATTEMPTED_CONTINUES 3 0-35 !Number of times tried to continue.
01118 PROGRAM_COUNTER 4 0-35 !PC at first error.
01119 FIRST_CONTENTS 5 0-35 !Found during sweep.
01120 FIRST_ADDRESS 6 0-35 !Physical address of first bad word.
01121 PAR_SWEEP_DATA 7 HEAD-F !pointer to %CCPAR sub-table.
01122 TOP_TEN,_BAD_ADD 8 HEAD-F !Pointer to %CCMPT sub-table.
01123 USER_ID 9 0-35 !PPN of user running at time of error.
01124 PROGRAM_NAME 10 0-35 ! His program.
01125 APR_STATUS 11 0-35 !CONI APR at time of first error.
01126 RDERA_STATUS 12 0-35 !RDERA at time of first error.
01127 SBDIAG_LIST 13 HEAD-F !Pointer to SBDIAG sub-table.
01128 ! - # blocks,,offset from header.
01129 END ENTRY
01130
01131 !++
01132 !
01133 ! KL10 status block entry for TOPS-10. This comes after
01134 ! certain entries if KLSTAT has been turned on.
01135 !
01136 !--
01137
01138 ENTRY TOPS10
01139 063 KL_CPU_STATUS_10
01140 APR_ID 0 0-35 !CPU identifier.
01141 APR_STATUS 1 0-35 !CONI APR word at time of crash.
01142 PI_STATUS 2 0-35 !CONI PI word at time of crash.
01143 PAGE_DATAI 3 0-35 !DATAI PAG at time of crash.
01144 PAGE_STATUS 4 0-35 !CONI PAG at time of crash.
01145 LAST_MUUO 5 0-35 !UPT location 424.
01146 LAST_MUUO_PC 6 0-35 !UPT location 425.
01147 MUUO_CONTEXT_WORD 7 0-35 !UPT location 426.
01148 MUUO_RESERVED 8 0-35 !UPT location 427.
01149 RDERA_STATUS 9 0-35 !RDERA at crash time.
01150 CONI_RH20_LIST 10 0-35 !All CONIs from RH20s.
01151 CONI_DTE_LIST 18 0-35 !All CONIs from DTEs.
01152 CHN_LOGOUT_LIST 22 BODY-F !EPT loc 0 through 37.
01153 DTE_CONTROL_BLOCK 54 BODY-F !EPT loc 140 through 177.
01154 PAGE_FAIL_WORD 86 0-35 !UPT location 500.
01155 PAGE_FAIL_OLD_PC 87 0-35 !UPT location 501.
01156 PAGE_FAIL_NEW_PC 88 0-35 !UPT location 502.
01157 UPT_503 89 0-35 !Reserved (unknown).
01158 AC_BLOCK_6_DATA 90 BODY-F !Locs. 0-3 and 12.
01159 AC_BLOCK_7_DATA 95 BODY-F !Locs. 0-2.
01160 SBDIAG_LIST 98 HEAD-F !Pointer to SBDIAG list.
01161 END ENTRY
01162
01163 !++
01164 !
01165 ! Device status block entry for TOPS-10.
01166 !
01167 !--
01168
01169 ENTRY TOPS10
01170 064 DEVICE_STATUS_10
01171 NUMBER_IO_INSTR 0 0-17 !Number of IO instructions in block.
01172 START_OF_INSTR 0 18-35 !Where instructions begin.
01173 NUMBER_OF_RESULTS 1 0-17 !Number of IO instruction results.
01174 START_OF_RESULTS 1 18-35 !Where results begin.
01175 DEVICE_DATA 2 0-35 !-(NUMBER_IO_INSTR + NUMBER_OF_RESULTS)
01176 END ENTRY
01177
01178 !++
01179 ! Obsolete KL10 address fail entry written by TOPS-10.
01180 !--
01181
01182 ENTRY TOPS10
01183 066 OLD_KL_ADDRESS_FAIL_10
01184 KAENAM 0 0-35 !SIXBIT CPU NAME
01185 KAETNE 1 0-35 !TOTAL # OF ERRORS
01186 KAESNE 2 0-35 !# F SPURIOUS ERRORS
01187 KAEMPP 3 0-35
01188 KAENJA 4 0-35
01189 KAEMNA 5 0-35
01190 KAELNA 6 0-35
01191 KAEMNR 7 0-35
01192 KAENTS 8 0-35 !# ERRORS DETECTED THIS SWEEP
01193 KAENSC 9 0-35 !# OF SWEEPS
01194 KAEUEN 10 0-35 !# OF USER ENABLED ERRORS
01195 KAENAA 11 0-35 !LOGICAL AND OF BAD ADDRESSES
01196 KAENOA 12 0-35 !LOGICAL OR OF BAD ADDRESSES
01197 KAENCS 13 0-35 !# FAILURES DET BY CHAN BUT NOT CPU
01198 KAEKPG 14 0-35 !FLAG WD FOR NXM TABLES
01199 KAEBEF 15 0-35 !PTR TO NXM TABLE BEFORE ERROR
01200 KAEAFT 16 0-35 !PTR TO NXM TABLE AFTER ERROR
01201 KAEADR 17 0-35 !PTR TO LIST OF BAD ADDRESSES
01202 KAEPPN 18 0-35 !PPN OF USER
01203 KAEPGM 19 0-35 !PROGRAM NAME
01204 KAECNI 20 0-35 !CONI APR
01205 KAEERA 21 0-35 !RDERA
01206 KAESBD 22 0-35 !PTR TO SBDIAG SUBTABLE
01207 END ENTRY
01208
01209 !++
01210 ! Address fail data written by TOPS-10.
01211 !--
01212
01213 ENTRY TOPS10
01214 067 KL_ADDRESS_FAIL_10
01215 KAENAM 0 0-35 !CPU NAME IN SIXBIT
01216 KAETNE 1 0-35 !# REPRODUCIBLE ERRORS
01217 KAESNE 2 0-35 !# SPURIOUS ERRORS
01218 KAEMPP 3 0-35 !PC AT ERROR
01219 KAENJA 4 0-35 !# OF JOBS AFFECTED
01220 KAEMNA 5 0-35 !1ST BAD ADDRESS
01221 KAELNA 6 0-35 !LAST ADDRESS
01222 KAEMNR 7 0-35 !RELATIVE ADDR OF NXM IN SEGMENT
01223 KAENTS 8 0-35 !# OF ERRORS DETECTED THIS SWEEP
01224 KAENSC 9 0-35 !# OF CORE SWEEPS
01225 KAEUEN 10 0-35 !# USER ENABLED ERRORS
01226 KAENAA 11 0-35 !LOGICAL AND OF BAD ADDRESSES
01227 KAENOA 12 0-35 !LOGICAL OR OF BAD ADDRESSES
01228 KAENCS 13 0-35 !# DET BY CHAN BUT NOT CPU
01229 KAEKPG 14 0-35 !FLAG WD FOR NXM TABLES
01230 KAEBEF 15 0-35 !PTR TO NXM TABLES BEFORE ERROR
01231 !-LENGTH,,OFFSET FROM HEADER WD 0
01232 KAEAFT 16 0-35 !PTR TO NXM TABLES AFTER ERROR
01233 !-LENGTH,,OFFSET FROM HEADER WD 0
01234 KAEADR 17 0-35 !PTR TO LIST OF BAD ADDRESSES
01235 !-LENGTH,,OFFSET FROM HEADER WD 0
01236 KAEPPN 18 0-35 !PPN OF USER
01237 KAEPGM 19 0-35 !PROGRAM NAME IN SIXBIT
01238 KAECNI 20 0-35 !CONI APR
01239 KAEERA 21 0-35 !RDERA
01240 KAESBD 22 0-35 !PTR TO SBDIAG SUBTABLE
01241 !-# OF ENTRIES,,OFFSET FROM HEADER WD 0
01242 END ENTRY
01243
01244 !++
01245 ! Information about hard copy errors written by TOPS-10 for
01246 ! the LP100 controller.
01247 !--
01248
01249 ENTRY TOPS10
01250 071 LP100_ERR_10
01251 LPTNAM 0 0-35 !DEVICE NAME IN SIXBIT
01252 LPTCNI 1 0-35 !CONI LP100
01253 LPTWRD 2 0-35 !LAST DATA WORD SENT TO PRINTER
01254 LPTTYP 3 0-35 !LPT ID
01255 END ENTRY
01256
01257 !++
01258 ! Information written by TOPS-10 on errors from a hard copy
01259 ! controller (BA10 or LP100).
01260 !--
01261
01262 ENTRY TOPS10
01263 072 HARD_COPY_ERR_10
01264 HCCNAM 0 0-35 !SIXBIT DEVICE MANE
01265 HCCTYP 1 0-35 !CONTROLLER/DEVICE NAME
01266 HCCCTL 1 0-5 !CONTROLLER TYPE
01267 !0 = ILLEGAL
01268 !1 = BA10
01269 !2 = LP100
01270 !3 = LP20 (ON KS10)
01271 !4 = CD20 (ON KS10)
01272 HCCDEV 1 6-11 !DEVICE TYPE
01273 !0 = ILLEGAL
01274 !1 = LPT
01275 !2 = CDR
01276 !3 = CDP
01277 !4 = PLT
01278 !1B17 = NON-RECOVERABLE
01279 !RH = RETRY COUNT
01280 HCCUID 2 0-35 !PPN OF USER
01281 HCCPGM 3 0-35 !PROGRAM NAME
01282 HCCSBP 4 0-35 !PTR TO DEVICE SUB-BLOCK
01283 !+LENGTH,,OFFSET FROM HCCNAM
01284 END ENTRY
01285
01286 !++
01287 ! The following entries are recorded by TOPS-20 via the
01288 ! monitor itself (the SYSERR) module.
01289 !--
01290
01291 !++
01292 !
01293 ! Reload information recorded by TOPS-20 systems whether or not an
01294 ! error occurred.
01295 !
01296 !--
01297
01298 ENTRY TOPS20
01299 101 SYSTEM_RELOAD_20
01300 SYS_NAME 0 MAIN$Z ! Offset to ASCIZ system name string
01301 SYS_BUILD_DATE 1 0-35 !System build date in universal format.
01302 MONITOR_VERSION 2 0-35 !Funny format showing major, minor
01303 !version, and edit number.
01304 CPU_SERIAL_NUMBER 3 0-35 !CPU which reloaded system as opposed
01305 !to CPU logging an error.
01306 WHY_RELOAD_CODE 4 MAIN$Z !Major reason-type supplied by
01307 !operator when reloading.
01308 BUGHLT_ADDRESS 5 0-35 !If auto-reload.
01309 RELOAD_FLAGS 6 0-35 !Don't know what flags are.
01310 END ENTRY
01311
01312 !++
01313 !
01314 ! Information recorded by TOPS-20 when a BUGCHK, BUGINF, or BUGHLT
01315 ! takes place.
01316 !
01317 !--
01318
01319 ENTRY TOPS20
01320 102 MONITOR_BUG_DATA_20
01321 SYS_NAME 0 MAIN$Z ! Offset to ASCIZ system name string
01322 CPU_SERIAL_NUMBER 1 0-35 !CPU which reloaded system as opposed
01323 !to CPU logging an error.
01324 MONITOR_VERSION 2 0-35 !Funny format showing major, minor
01325 !version, and edit number.
01326 SYS_BUILD_DATE 3 0-35 !System build date in universal format.
01327 !Undefined 4 0-33
01328 BUG_TYPE_FLAG 4 34-35 !Type of bug code
01329 ! DEFINE
01330 ! BUGCHK = 1
01331 ! BUGINF = 2
01332 ! BUGHLT = 3
01333 ! END DEFINE
01334 ERROR_ADDRESS 5 0-35 !Address of halt/check
01335 FORK_NUMBER 6 0-17 !Fork active at error time.
01336 JOB_NUMBER 6 0-35 ! Job active at time of occurrance.
01337 USER_ID 7 0-35 ! User number.
01338 PROGRAM_NAME 8 0-35 ! Name of job user was running.
01339 BUG_MESSAGE 9 MAIN$Z ! Offset to ASCIZ message string.
01340 SAVED_ACS 10 BODY-F !Contents of AC at time of error.
01341 !WORDS 10-25
01342 PI_STATUS 26 0-35 !CONI PI at time of STOPCODE.
01343 REGISTER_COUNT 27 0-35 !Maximum of 4.
01344 REGISTER_ONE 28 0-35 !
01345 REGISTER_TWO 29 0-35 !
01346 REGISTER_THREE 30 0-35 !
01347 REGISTER_FOUR 31 0-35 !
01348 STOP_BUG_NAME 32 0-35 !BUGCHK name in SIXBIT.
01349 BUGHLT_DATE_TIME 33 0-35 !Universal format time of crash.
01350 CHECK_TALLY 34 0-35 !Total number of errors since reload.
01351 APR_STATUS 35 0-35 !CONI APR at error-time.
01352 PAGE_STATUS 36 0-35 !CONI PAG at error-time.
01353 PAGE_DATAI 37 0-35 !DATAI PAG at error-time.
01354 RDERA_STATUS 38 0-35 !RDERA at error-time.
01355 END ENTRY
01356
01357 !++
01358 !
01359 ! TOPS-20 - ERROR CODE 111 ENTRY - Massbus device error
01360 !
01361 !--
01362
01363 ENTRY TOPS20
01364 111 MASSBUS_ERR_20
01365 DEV_NAM 0 0-35 !device name
01366 DEV_NAME 0 0-35 !device name
01367 VOL_ID 1 0-35 !volume identification
01368 MEDIAID 1 0-35 !media identification
01369 RH_CHAN_TYPE 2 15-17 !RH controller type
01370 RH_DEV_TYPE 2 31-35 !device type
01371 LBN 3 0-35 !logical block number at error
01372 ERR_LOCATION 3 0-35 !record number at error
01373 FILE_IN_ERROR 3 0-17 ! FILE IN ERROR
01374 RECORD_IN_ERROR 3 18-35 ! RECORD IN ERROR
01375 FINAL_ERR_STATE 4 0-35 !final error state from TOPS20
01376 HARD 4 0 !hard error - non-recoverable
01377 ECC_CORR 4 1 !ECC correctable error
01378 DAT_ERR 4 2 !data error
01379 HDR_ERR 4 3 !header error
01380 DEV_ERR 4 4 !device error - neither data
01381 !or header
01382 POSITION_ERR 4 5 !positioning error
01383 FORMAT_ERR 4 6 !format error
01384 REC_NOMOTION_ERR 4 17 !recoverable no motion error
01385 CONI_INITIAL 5 0-35 !initial RH controller status
01386 RHCS1_ERR 5 20-35 ! Control and Status 1 for RH11
01387 CONI_FINAL 6 0-35 !final RH controller status
01388 SEEK_CNT 7 0-35 !number of seeks
01389 BLOCKS_READ 8 0-35 !no. of blocks read for disk
01390 FRAMES_READ 8 0-35 !no. of frames read for tape
01391 BLOCKS_WRITE 9 0-35 !no. of blocks written for disk
01392 FRAMES_WRITTEN 9 0-35 !no. of frames written for tape
01393 FILE_NAME 10 0-35 !file name
01394 USER 11 0-35 !user making request
01395 PROGRAM_RUN 12 0-35 !program running
01396 RH_DATI_TCR_ERR 13 0-35 !RH control reg at error
01397 RHCS2_ERR 13 20-35 ! Control and Status 2 for RH11
01398 RH_DATI_TCR_END 14 0-35 !RH control reg at end
01399 RH_DATI_BAR_ERR 15 0-35 !RH block address reg at err
01400 UBA_STATUS_ERR 16 0-17 ! IF RH11
01401 UBA_MAP_ERR 16 18-35 ! IF RH11
01402 RH_DATI_BAR_END 16 0-35 !RH block address reg at end
01403 UBA_STATUS_END 16 0-17 ! IF RH11
01404 UBA_MAP_END 16 18-35 ! IF RH11
01405 UDB_JOB0 17 0-35 !unit data block for job 0
01406 IORB_STATUS 18 0-35 !IORB status word
01407 SUM_HARD 18 2 !Used by summary to say hard/soft
01408 SOFT_READ 19 0-35 !count of soft read errors
01409 SOFT_WRITE 20 0-35 !count of write errors
01410 HARD_READ 21 0-35 !count of hard read errors
01411 HARD_WRITE 22 0-35 !count of hard write errors
01412 CYLINDER 23 0-35 !cylinder position at error for disk
01413 FILE_POSITION 23 0-35 !file position at error for tape
01414 SURF_SECT 24 0-35 !surface and sector at error for disk
01415 ERR_RECORD 24 0-35 !record in error for tape
01416 CHAN_LOGO0 25 0-35 !channel logout word 0
01417 CHAN_LOGO1 26 0-35 !channel logout word 1
01418 CHAN_LOGO2 27 0-35 !channel logout word 2
01419 CCW1 28 0-35 !first chan control word
01420 CCW2 29 0-35 !second chan control word
01421 MPE_CNT 30 0-35 !parity error count
01422 NXM_CNT 31 0-35 !NXM error count
01423 RETRY_CNT 32 18-35 !final retry error count
01424 CHAN_ADDR 33 0-35 !channel address
01425 ! **** unknown 33 0-32 ! [1000]
01426 CHAN_NUMBER 33 33-35 !just the channel number
01427 UNIT_ADDR 34 0-35 !unit address
01428 KON_NUMBER 34 0-17 ! [1000]
01429 UNT_NUMBER 34 32-35 ! Funny name used by some people
01430 UNIT_NUMBER 34 32-35 ! [1000]just the unit number
01431 ! Can't handle 8-bit RP20 unit numbers
01432 SOFT_POS_ERR 35 0-35 !soft position error count
01433 HARD_POS_ERR 36 0-35 !hard positioning error count
01434 OVERRUN_ERR 37 0-35 !overrun error count
01435 ICR 38 0-35 !content of initial control reg
01436 INIT_CNTRL_REG 38 0-35 !content of initial control reg
01437 MB_DEV, _TABLE 39 BODY-F ! MASSBUS device registers
01438 ! 39 - 54
01439 ! ***** ADDITIONAL DEFINITIONS FOR DX20 *****
01440 DX_VER 39 18-35 ! DX version number
01441 DX20_MASSBUS_REG 40 MAIN+F ! Pointer to MASSBUS registers
01442 ! +LENGTH,,OFFSET
01443 DX20_DEVICE_REG 41 MAIN+F ! Pointer to device registers
01444 ! +LENGTH,,OFFSET
01445 !++
01446 !
01447 ! TM78 controller status block
01448 !
01449 !--
01450 TM78_CAS_REGS,_END_20 39 BODY-L ! CAS REGISTERS 0-21 FOR TU78
01451 TM78_CAS_REGS,_ERR_20 39 BODY-R
01452 TM78_U_CODE_REVS,_20 57 BODY-F ! TU78 U-CODE REVISION LEVELS (2 WORDS)
01453 TM78_SENSE_BYTES,_20 59 BODY-F ! 60 8-BIT BYTES IN 15 WORDS
01454 END ENTRY
01455
01456 !++
01457 ! This is the Tops-20 Release 5 disk/tape statistics entry.
01458 ! It is not an error. It occurs at normal system shutdown and
01459 ! at tape unloads, and for disk mount/dismount.
01460 !--
01461
01462 ENTRY TOPS20
01463 114 USAGE_DATA_20
01464 USAGE_EVENT 0 0-35 ! 1 = system shutdown
01465 ! 2 = disk pack mount
01466 ! 3 = disk pack dismount
01467 ! 4 = magtape unload
01468 TAPE_UNIT 1 0-35 ! Magtape unit number or 0 if disk
01469 VOLUME_ID 2 0-35 ! SIXBIT name of volume/structure
01470 CHN_PIA 3 8-10 ! channel PI level
01471 CHN_BLK_ID 3 11-12 ! block code (1=CDB)
01472 CHN_TYPE 3 13-17 ! channel type
01473 DEV_PIA 3 26-28 ! device PIA level
01474 DEV_BLK_ID 3 29-30 ! block code (2=KDB, 3=UDB)
01475 DEV_TYPE 3 31-35 ! device type
01476 CHN_NUMBER 4 0-35 ! channel number
01477 KON_NUMBER 5 0-17 ! kontroller number (-1 if none)
01478 UNT_NUMBER 5 32-35 ! unit number
01479 UNIT_NUMBER 5 32-35 ! just the unit number
01480 ! Can't handle 8-bit RP20 unit numbers
01481 TOTAL_READS 6 0-35 ! total reads on this unit
01482 TOTAL_WRITES 7 0-35 ! total writes on this unit
01483 TOTAL_SEEKS 8 0-35 ! total seeks on this unit
01484 RD_NRZI 9 0-35 ! frames read in NRZI
01485 RD_PE 10 0-35 ! frames read in PE
01486 RD_GCR 11 0-35 ! frames read in GCR
01487 WR_NRZI 12 0-35 ! frames written in NRZI
01488 WR_PE 13 0-35 ! frames written in PE
01489 WR_GCR 14 0-35 ! frames written in GCR
01490 END ENTRY
01491
01492 !++
01493 ! Information recorded by TOPS-20 when some part of the configuration
01494 ! changes status. This is not an error.
01495 !--
01496
01497 ENTRY TOPS20
01498 115 CONFIG_CHANGE_20
01499 COMMAND_CODE 0 12-17 !OPERATION CODE FIELD
01500 UNIT_TYPE 1 31-35 !UNIT TYPE
01501 DEVICE_NAME 2 0-35 !SIXBIT LOGICAL DEVICE NAME
01502 MTOPR_FUNCTION 3 0-35 !MTOPR FUNCTION $MOINF WORD $MOISN
01503 CHANNEL_NUMBER 3 9-11 !CHANNEL #
01504 CONTROLLER_NUMBER 3 12-14 !CONTROLLER #
01505 UNIT_NUMBER 3 15-17 !UNIT #
01506 SERIAL_NUMBER 3 20-35 !DRIVE SERIAL NUMBER (IN BINARY)
01507 CHANGE_REASON 4 0-35 !WORD CONTAINING OFFSET TO REASON STRING
01508 END ENTRY
01509
01510 !++
01511 ! System log entry
01512 !--
01513
01514 ENTRY TOPS20
01515 116 SYS_ERROR_LOG_20
01516 ERROR_LOG 0 BODY-F !See below
01517 END ENTRY
01518
01519 !++
01520 ! TOPS-20 front-end entry
01521 !--
01522
01523 ENTRY TOPS20
01524 130 FE_DEVICE_ERR_20
01525 FE_DATA 0 BODY-F !Common FE table data
01526 END ENTRY
01527
01528 !++
01529 ! Information saved by TOPS-20 when the front end is reloaded.
01530 !--
01531
01532 ENTRY TOPS20
01533 131 FE_RELOAD_20
01534 R1_NUM 0 0-35 !-11 NUMBER
01535 R1_STS 1 0-35 !RELOAD STATUS BITS
01536 $R1GTF 1 0 !GTJFN FAILED FOR DUMP FILE
01537 $R1OPF 1 1 !OPENF FAILED FOR DUMP FILE
01538 $R1DPF 1 2 !DUMP FAILED
01539 $R110E 1 3 !TO -10 ERROR ON DUMP
01540 $R111E 1 4 !TO -11 ERROR ON BOOT
01541 $R1ASF 1 5 !ASGPAG FAILED ON DUMP
01542 $R1RLF 1 6 !RELOAD FAILED
01543 $R1PDF 1 7 !-11 DIDN'T POWER DOWN
01544 $R1PUF 1 8 !-11 DIDN'T POWER UP
01545 $R1RMF 1 9 !ROM DID NOT ACK THE -10
01546 $R1BSF 1 10 !-11 BOOT PROGRAM DIDN'T MAKE IT TO THE -11
01547 $R1NRL 1 11 !-11 TOOK MORE THAN 1 MINUTE TO RELOAD$
01548 !WILL CAUSE A RETRY
01549 ER$DHG 1 12 !TO-10 BYTE XFER FOR DUMP HUNG
01550 ER$ENF 1 13 !ENTER FAILURE FOR DUMP FILE
01551 ER$OPE 1 14 !OPEN FAILURE FOR DUMP OUTPUT DEVICE
01552 ER$OUF 1 15 !OUTPUT FAILURE FOR DUMP FILE
01553 ER$TT1 1 16 !TO-11 BYTE XFER TIMED OUT
01554 $R1RTC 1 30-35 !RETRY COUNT
01555 R1_FNM 2 0-35 !FILE NAME POINTER
01556 R1_ERW 3 0-35 ![534]BITS 2-17=RAD50 11'S FAILURE CODE
01557 !BITS 20-35 = 11'S PARITY STATUS REGISTER
01558 END ENTRY
01559
01560 !++
01561 ! Information saved by TOPS-20 when the KS10 halts
01562 !--
01563
01564 ENTRY TOPS20
01565 133 KS_HALT_STATUS_20
01566 STATUS_CODE 0 0-35 !HALT STATUS CODE - PHYSICAL LOCATON 0
01567 HS_HPC 1 0-35 !PROGRAM COUNTER - PHYSICAL LOCATION 1
01568 KS_HS_BLOCK 2 BODY-F !HALT STATUS BLOCK OFFSET POINTER
01569 !-LENGTH,,OFFSET
01570 CS_PTR 3 0-35 !CLOK STOP BLOCK OFFSET POINTER (UNUSED)
01571 !-LENGTH,,OFFSET
01572 END ENTRY
01573
01574 !++
01575 !
01576 ! Parity trap entry for TOPS-20 systems
01577 !
01578 !--
01579
01580 ENTRY TOPS20
01581 160 CPU_PAR_TRAP_20
01582 PAGE_FAIL_WORD 0 0-35 !At time of trap.
01583 BAD_WORD 1 0-35 !Contents of word with parity error.
01584 GOOD_WORD 2 0-35 !What the word should have been.
01585 USER_ID 3 0-35 !User identifier.
01586 FORK_NUMBER 4 0-17 ! Fork in use at time.
01587 JOB_NUMBER 4 18-35 ! Job of user running at time.
01588 PROGRAM_NAME 5 0-35 ! Program running.
01589 PHYS_ADDRESS 6 0-35 !Address of parity error.
01590 !undefined 7 0
01591 NOT_RECOVERED_FLAG 7 1 !Set by monitor when can't recover.
01592 CACHE_FAILED_FLAG 7 2 !When read from memory OK.
01593 CACHE_USE_FLAG 7 3 !Set when cache was on at time.
01594 SWEEP_FLAG 7 4 !If error during cache sweep.
01595 !undefined 7 5-17 !
01596 RETRY_COUNT 7 18-35 !Number of times tried to recover.
01597 END ENTRY
01598
01599 !++
01600 ! Obsolete parity error interrupt record written by TOPS-20
01601 ! and replaced by entry 162.
01602 !--
01603
01604 ENTRY TOPS20
01605 161 OLD_CPU_PAR_INT_20
01606 PI_CNI 0 0-35 !CONI APR
01607 PI_ERA 1 0-35 !ERA
01608 PI_FPC 2 0-35 !PC AT INTERRUPT
01609 PI_SWP 3 0-35 !# ERRORS THIS SWEEP
01610 PI_AAD 4 0-35 !LOGICAL AND OF BAD ADDRESSES
01611 PI_OAD 5 0-35 !OR OF BAD ADDRESSES
01612 PI_ADA 6 0-35 ! AND OF BAD DATA
01613 PI_ODA 7 0-35 !OR OF BAD DATA
01614 PI_SBD 10 0-35 !S-BUS DIAG FUNCTION SUBTABLE
01615 PI_ADD 22 0-35 !LIST OF 1ST 10. BAD ADDRESSES
01616 PI_DAT 34 0-35 !LIST OF 1ST 10. BAD DATA WORDS
01617 PI_CDA 46 0-35 !LIST OF 1ST 10. GOOD DATA WORDS
01618 END ENTRY
01619
01620 !++
01621 !
01622 ! Interrupt entry from TOPS-20
01623 !
01624 !--
01625
01626 ENTRY TOPS20
01627 162 CPU_PAR_INT_20
01628 APR_STATUS 0 0-35 !CONI APR at time of first error.
01629 RDERA_STATUS 1 0-35 !RDERA at time of first error.
01630 PC_FLAGS 2 0-35 !Right-justified?
01631 PROGRAM_COUNTER 3 0-35 !PC at first error.
01632 MEM_PAR_ERRORS 4 0-35 !Count of parity errors this sweep.
01633 ADDRESS_AND 5 0-35 !Logical AND of failing addresses.
01634 ADDRESS_OR 6 0-35 !Logical OR of failing addresses.
01635 CONTENTS_AND 7 0-35 !Logical AND of failing data.
01636 CONTENTS_OR 8 0-35 !Logical OR of failing data.
01637 SBDIAG_LIST 9 HEAD-F !Pointer to SBDIAG sub-table.
01638 !- # blocks,,offset from header.
01639 TOP_TEN,_BAD_ADD 10 BODY-F !List of bad addresses.
01640 !WORDS 10-19
01641 TOP_TEN,_BAD_WORDS 20 BODY-F !List of bad word contents.
01642 !WORDS 20-29
01643 TOP_TEN,_GOOD_WORDS 30 BODY-F !List of what words should have been?
01644 !WORDS 30-39
01645 END ENTRY
01646
01647 !++
01648 !
01649 ! KL10 status block entry for TOPS-20. This comes after
01650 ! certain entries if KLSTAT has been turned on.
01651 !
01652 !--
01653
01654 ENTRY TOPS20
01655 163 KL_CPU_STATUS_20
01656 APR_ID 0 0-35 !CPU identifier.
01657 APR_STATUS 1 0-35 !CONI APR word at time of crash.
01658 PI_STATUS 2 0-35 !CONI PI word at time of crash.
01659 PAGE_DATAI 3 0-35 !DATAI PAG at time of crash.
01660 PAGE_STATUS 4 0-35 !CONI PAG at time of crash.
01661 MUUO_RESERVED 5 0-35 !UPT location 424
01662 LAST_MUUO 6 0-35 !UPT location 425.
01663 LAST_MUUO_PC 7 0-35 !UPT location 426.
01664 MUUO_CONTEXT_WORD 8 0-35 !UPT location 427.
01665 RDERA_STATUS 9 0-35 !RDERA at crash time.
01666 CONI_RH20_LIST 10 0-35 !All CONIs from RH20s.
01667 CONI_DTE_LIST 18 0-35 !All CONIs from DTEs.
01668 CHN_LOGOUT_LIST 22 BODY-F !EPT loc 0 through 37.
01669 DTE_CONTROL_BLOCK 54 BODY-F !EPT loc 140 through 177.
01670 PAGE_FAIL_WORD 86 0-35 !UPT location 500.
01671 PAGE_FAIL_FLAGS 87 0-35 !UPT location 501.
01672 PAGE_FAIL_OLD_PC 88 0-35 !UPT location 502.
01673 PAGE_FAIL_NEW_PC 89 0-35 !UPT location 503.
01674 AC_BLOCK_6_DATA 90 BODY-F !Locs. 0-3 and 12.
01675 AC_BLOCK_7_DATA 95 BODY-F !Locs. 0-2.
01676 SBDIAG_LIST 98 HEAD-F !Pointer to SBDIAG list.
01677 END ENTRY
01678
01679 !++
01680 ! Message recorded by TOPS-20 when TGHA finds an error in MOS
01681 ! memory.
01682 !--
01683
01684 ENTRY TOPS20
01685 164 MF_20_ERR_20
01686 MF_20_TEXT 0 0-35 !ALL TEXT
01687 END ENTRY
01688
01689 !++
01690 ! The following entries describe DECNET Phase II reports
01691 ! for TOPS-10 and TOPS-20.
01692 !--
01693
01694 ENTRY TOPS10 TOPS20
01695 201 NETCON_START
01696 NETCON_VERSION 0 0-35 ! Version of NETCON software
01697 NODE_NAME 1 MAIN$Z ! Offset to ASCIZ node name string
01698 PROGRAM_NAME 2 MAIN$Z ! Offset to ASCIZ program name string
01699 END ENTRY
01700
01701 ENTRY TOPS10 TOPS20
01702 202 NODE_DOWN_LINE_LOAD
01703 TARGET_NODE 0 MAIN$Z ! Offset to ASCIZ target node name
01704 SERVER_NODE 1 MAIN$Z ! Offset to ASCIZ server node name
01705 SERVER_LINE 2 MAIN$Z ! Offset to ASCIZ servr line designator
01706 FILE_NAME 3 MAIN$Z ! Offset to ASCIZ name of file loaded
01707 RETURN_CODE 4 28-35 ! Return code as described below
01708 PROGRAM_NAME 5 MAIN$Z ! Offset to ASCIZ program name string
01709 ! Unused 6 0-35
01710 END ENTRY
01711
01712 !++
01713 ! Return codes specified in NICE protocol version 1.0
01714 ! Bob Stewart, 28 March 1977
01715 !
01716 ! +1 SUCCESS
01717 ! -1 INVALID FUNCTION OR OPTION
01718 ! -2 INVALID MSG FORMAT
01719 ! -3 INSUFFICIENT STATUS
01720 ! -8 INVALID LINE ID
01721 ! -9 LINE IN WRONG STATE
01722 ! -10 LINE COMMUNICATIONS ERROR
01723 ! -11 INVALID NODE ID
01724 ! -12 INVALID SERVER ID
01725 ! -13 INVALID FILE
01726 ! -14 CONFIGURATION DATA BASE ERROR
01727 ! -15 RESOURCE ERROR
01728 ! -16 INVALID PARAMETER VALUE
01729 ! -17 LINE PROTOCOL ERROR
01730 ! -18 FILE I/O ERROR
01731 ! -19 NETWORK COMMUNICATIONS ERROR
01732 ! -20 NO ROOM FOR NEW ENTRY
01733 ! -21 REMOTE NICE PROCESS NOT AVAIL.
01734 !--
01735
01736 ENTRY TOPS10 TOPS20
01737 203 NODE_DOWN_LINE_DUMP
01738 TARGET_NODE 0 MAIN$Z ! Offset to ASCIZ target node name
01739 SERVER_NODE 1 MAIN$Z ! Offset to ASCIZ server node name
01740 SERVER_LINE 2 MAIN$Z ! Offset to ASCIZ servr line designator
01741 FILE_NAME 3 MAIN$Z ! Offset to ASCIZ name of file dumped
01742 RETURN_CODE 4 28-35 ! Return code as described above
01743 PROGRAM_NAME 5 MAIN$Z ! Offset to ASCIZ program name string
01744 ! Unused 6 0-35
01745 END ENTRY
01746
01747 ENTRY TOPS10 TOPS20
01748 210 NET_HARDWARE_ERR
01749 XMIT_NODE_ID 0 0-17 ! Transmit node ID #
01750 RECV_NODE_ID 0 18-35 ! Destination node ID #
01751 XMIT_NODE_NAME 1 MAIN$Z ! Offset to ASCIZ transmit node name
01752 RECV_NODE_NAME 2 MAIN$Z ! Offset to ASCIZ receive node name
01753 ADJ_NODE_NAME 3 MAIN$Z ! Offset to ASCIZ adjacent node name
01754 FUNCTION_WORD 4 0-35 ! Function word
01755 ! Unknown 4 0-9
01756 PARENT_HDWR_TYPE 4 10-17 ! Parent hardware system type
01757 PARENT_SFWR_TYPE 4 20-27 ! Parent operating system type
01758 HDWR_OPTION_TYPE 4 28-35 ! Hardware option type
01759 BYTE_COUNT 5 0-35 ! # of 8 bit bytes in log data section
01760
01761 ! LOG_DATA 14 MAIN-F ! Offset to log data section
01762 END ENTRY
01763
01764 ENTRY TOPS10 TOPS20
01765 211 NET_SOFTWARE_ERR
01766 END ENTRY
01767
01768 ENTRY TOPS10 TOPS20
01769 220 NET_OPR_LOG_ENTRY
01770 END ENTRY
01771
01772 ENTRY TOPS10 TOPS20
01773 221 NET_TOPOLOGY_CHANGE
01774 END ENTRY
01775
01776 ENTRY TOPS10 TOPS20
01777 222 NET_CHECK11_REPORT
01778 END ENTRY
01779
01780 ENTRY TOPS10 TOPS20
01781 230 NET_LINE_STATS
01782 END ENTRY
01783
01784 ENTRY TOPS10 TOPS20
01785 231 NET_NODE_STATS
01786 END ENTRY
01787
01788 ENTRY TOPS10 TOPS20
01789 232 OLD_DN64_STATS
01790 END ENTRY
01791
01792 ENTRY TOPS10 TOPS20
01793 233 DN6X_STATS
01794 END ENTRY
01795
01796 ENTRY TOPS10 TOPS20
01797 234 DN6X_ENABLE_DISABLE
01798 END ENTRY
01799
01800 ENTRY TOPS10 TOPS20
01801 240 DECNET_PHASE_III
01802 BYTE_COUNT 0 0-35 ! Count of 8 bit data bytes in entry.
01803 FUNCT_CODE 1 0-7 ! Type of message
01804
01805 ! Entry is an 8-bit byte stream. For an "Event Logging Message"
01806 ! (FUNCT_CODE = 1) the entry consists of the following fields:
01807
01808 ! SINK_FLAGS ! See WORD_11 definition
01809 ! EVENT_CODE ! See WORD_11 definition
01810 ! EVENT_CLASS
01811 ! EVENT_TYPE
01812 ! EVENT_TIME
01813 ! JULIAN_HALF_DAY
01814 ! SECOND
01815 ! MILLISECOND
01816 ! SOURCE_NODE
01817 ! NODE_ADDRESS
01818 ! NODE_NAME
01819 ! EVENT_ENTITY
01820 ! ENTITY_TYPE
01821 ! ENTITY_ID
01822 ! EVENT_DATA
01823 ! DATA_ID ! See WORD_11 definition
01824 ! PARAMETER_DATA
01825 ! PARAMETER_TYPE
01826 ! DATA_TYPE ! See WORD_11 definition
01827 ! COUNTER_DATA
01828 ! COUNTER_WIDTH
01829 ! BIT_MAPPED_FLAG
01830 ! COUNTER_TYPE
01831 ! BIT_MAP ! Present if BIT_MAPPED_FLAG is set
01832 ! DATA
01833 !
01834 END ENTRY
01835
01836 !++
01837 !
01838 ! LOGGER/AVAIL entry definitions
01839 !
01840 !--
01841
01842 ENTRY TOPS20
01843 500 logger
01844 lgr_data_block 0 MAIN-F
01845 lgr_count 0 0-17 ! block size
01846 lgr_cr_msec 1 0-35 ! block creation time (milliseconds)
01847 lgr_wr_msec 2 0-35 ! block write time
01848 lgr_address 3 0-35 ! "monitor" address of this block
01849 lgr_block_id 4 0-8 ! block type code
01850 lgr_channel 4 9-17 ! device channel number
01851 lgr_kontroller 4 18-26 ! device kontroller number
01852 lgr_unit 4 27-35 ! device unit number
01853 END ENTRY
01854
01855 ! TABLES FOR LOGGER ENTRIES
01856
01857 TABLE TOPS20
01858 lgr_data_block
01859 lgr_table_count 0 0-35 ! number of GETAB subtables
01860 lgr_table_id 1 0-17 ! GETAB number of this table
01861 lgr_table 1 MAIN+F ! define subtable format
01862 ! ... GETAB data block format ...
01863 ! IDSYS = %O'14', System GETAB data
01864 ! IDSUB = %O'15', Subsystem GETAB data
01865 ! ...
01866 ! Monitor name block (IDNAM = %O'13')
01867 sys_build_date 0 0-35 ! monitor build date/time
01868 sys_name 1 0-35 ! ASCIZ text string starts here
01869 ! System/Program data block (IDPGM = %O'23')
01870 lgr_version 0 0-35 ! LOGGER version number
01871 lgr_wakeup_counter 6 0-35 ! number of times LOGGER has run
01872 lgr_start_udt 7 0-35 ! startup date/time
01873 lgr_start_msec 8 0-35 ! startup system runtime
01874 lgr_wakeup_udt 9 0-35 ! wakeup date/time
01875 lgr_wakeup_msec 10 0-35 ! wakeup system runtime
01876 lgr_time_change_udt 16 0-35 ! total date/time change (UDT)
01877 monitor_version 17 0-35 ! monitor version number
01878 lgr_sched_down 34 0-35 ! scheduled downtime
01879 lgr_sched_up 35 0-35 ! scheduled uptime
01880 END TABLE
01881
01882 TABLE TOPS20
01883 lgr_table ! .. sub table format (GETAB data) ...
01884 lgr_table_size 0 0-17 ! number of words in this table
01885 lgr_table_gtb 0 18-35 ! GETAB number of this table (self-check)
01886 lgr_table_data 1 0-35 ! fullword data ...
01887 ! NOTE: descriptions of indivdual tables can be found
01888 ! in the TOPS20 Monitor Calls Reference Manual
01889 ! section 2.3.2 System Tables
01890 ! and Appendix B (which defines the symbolic table names)
01891 END TABLE
01892
01893 ENTRY TOPS10
01894 44 avail_reload
01895 sys_name 0 MAIN$Z ! pointer to monitor name
01896 monitor_version 1 0-35 ! monitor version
01897 monitor_runtime 2 0-35 ! monitor runtime
01898 daemon_wakeup 3 0-35 ! date/time DAEMON last woke up
01899 reload_date_time 4 0-35 ! date/time of this reload
01900 reload_why_sixbit 5 0-35 ! SIXBIT reload reason code
01901 time_change 6 0-35 ! total date/time change
01902 END ENTRY
01903
01904 ENTRY TOPS10
01905 46 avail_bof
01906 daemon_version 0 0-35 ! DAEMON version number
01907 END ENTRY
01908
01909 ENTRY TOPS10
01910 47 avail_eof
01911 daemon_version 0 0-35 ! DAEMON version number
01912 END ENTRY
01913
01914
01915 !++
01916 ! The following tables represent a finer definition of
01917 ! entries recorded by TOPS-10 and TOPS-20.
01918 !--
01919
01920 TABLE TOPS10 TOPS20
01921 AC_BLOCK_6_DATA !Saved ACs from block 6
01922 AC0 0 0-35
01923 AC1 1 0-35
01924 AC2 2 0-35
01925 AC3 3 0-35
01926 AC12 4 0-35
01927 END TABLE
01928
01929 TABLE TOPS10 TOPS20
01930 AC_BLOCK_7_DATA !Saved ACs from block 7
01931 AC0 0 0-35
01932 AC1 1 0-35
01933 AC2 2 0-35
01934 END TABLE
01935
01936 TABLE TOPS10 TOPS20
01937 CHN_LOGOUT_LIST ! Holds logout blocks for 8 channels.
01938 CHN_LOGOUT,_0 0 BODY-F
01939 CHN_LOGOUT,_1 4 BODY-F
01940 CHN_LOGOUT,_2 8 BODY-F
01941 CHN_LOGOUT,_3 12 BODY-F
01942 CHN_LOGOUT,_4 16 BODY-F
01943 CHN_LOGOUT,_5 20 BODY-F
01944 CHN_LOGOUT,_6 24 BODY-F
01945 CHN_LOGOUT,_7 28 BODY-F
01946 END TABLE
01947
01948 TABLE TOPS10 TOPS20
01949 CHN_LOGOUT ! Format of channel logout block for each channel
01950 INIT_CHN_COMMAND 0 0-35
01951 CHN_STATUS_WORD 1 0-35
01952 LAST_COMMAND 2 0-35
01953 RESERVED_WORD 3 0-35
01954 END TABLE
01955
01956 !---------------------------------------------------------------
01957
01958 !++
01959 !
01960 ! TM10B controller status block
01961 !
01962 !--
01963
01964 TABLE TOPS10
01965 CSB_TM10
01966 TM10_TMC 0 0-35 ! CONI TMC
01967 TM10_TMS 1 0-35 ! CONI TMS
01968 END TABLE
01969
01970 WORD_10 TOPS10
01971 TM10_TMS
01972 TM10_CTL_PAR 11 ! Control word parity error
01973 TM10_NXM 12 ! No such memory
01974 TM10_MEM_PAR 13 ! Memory data parity error
01975 TM10_UNI_HNG 18 ! Unit hung
01976 TM10_ILL_OP 21 ! Illegal operation
01977 TM10_PAR_ERR 22 ! Tape parity error
01978 TM10_CMP_ERR 25 ! Read compare error
01979 TM10_LEN_ERR 26 ! Record length differs
01980 TM10_DAT_LAT 27 ! Data late
01981 TM10_BAD_TAP 28 ! Bad tape
01982 END WORD_10
01983
01984 !++
01985 !
01986 ! DX10 controller status block
01987 !
01988 !--
01989
01990 TABLE TOPS10
01991 CSB_DX10
01992 RBC 0 0-35 ! BYTE COUNT
01993 TAG 1 0-35 ! TAG LINES ,, BUS LINES
01994 DAC 2 0-35 ! DAC BITS 14 THRU 35
01995 FEATURE_REG 3 0-35 !
01996 UCODE_VERSION 3 0-5 ! Micro-code version #
01997 UCODE_EDIT 3 6-17 ! Micro-code edit #
01998 ! FEATURE_REG 3 18-35 ! Feature register
01999
02000 !++
02001 !
02002 ! THESE BYTES ARE IN THE FORMAT:
02003 ! BYTE 0 = BITS 2 - 9
02004 ! BYTE 1 = BITS 10-17
02005 ! BYTE 2 = BITS 20-27
02006 ! BYTE 3 = BITS 28-35
02007 ! VALUES ARE SUPPLIED FROM DX20 WITH VER 100 OR LATER OF U-CODE AS LONG AS
02008 ! DX20 IS STILL RUNNING. VALUES ARE THOSE DETECTED AT TIME OF THE ERROR.
02009 !
02010 !--
02011
02012 SENSE_BYTES_A 4 0-35 ! Sense bytes 0-3
02013 SENSE_BYTES_B 5 0-35 ! 4-7
02014 SENSE_BYTES_C 6 0-35 ! 8-11
02015 SENSE_BYTES_D 7 0-35 ! 12-15
02016 SENSE_BYTES_E 8 0-35 ! 16-19
02017 SENSE_BYTES_F 9 0-35 ! 20-23
02018 CONI 10 0-35 ! CONI DX10
02019 STATUS_WORD_1 11 0-35 ! ICPC + 1 (STATUS WORD)
02020 DX10_DSR 11 0-7 ! Device status register
02021 DX10_CSR 11 8-19 ! Channel status register
02022 DX10_SEQ_ERR 11 22-27 ! Sequence error code
02023 DX10_DAR 11 28-35 ! Device address register
02024 STATUS_WORD_2 12 0-35 ! ICPC + 2 (STATUS WORD)
02025 DX10_BC_OF 12 0 ! ?
02026 DX10_BYTE_CTR 12 1-13 ! Byte counter
02027 DX10_CPC 12 14-35 ! Channel program counter
02028 DX10_LAST_REC 13 12-35 ! Last record (block) length
02029 CHANNEL_CMD_WD 14 0-35 !
02030 CHANNEL_CMD_WD_2 15 0-35 !
02031 MD 16 0-35 ! MD AND CPMA
02032 DR_REG 17 0-35 !
02033 DAG 18 0-35 ! DIAGN FAILURE CODE
02034 MR1 19 0-35 ! DX MEM REG 10 & 11
02035 END TABLE
02036
02037 WORD_10 TOPS10
02038 CONI
02039 DX10_MP_ERR 26 ! MICROPROCESSOR ERROR
02040 DX10_MEM_PAR 27 ! DX10 MEMORY PARITY ERROR
02041 DX10_NXM 28 ! NXM
02042 END WORD_10
02043
02044 WORD_10 TOPS10
02045 DX10_DSR
02046 DSR_ATTN 28 ! Attention
02047 DSR_STAT_MOD 29 ! Status modifier
02048 DSR_CU_END 30 ! Control unit end
02049 DSR_BUSY 31 !
02050 DSR_CHAN_END 32 ! Channel end
02051 DSR_DEV_END 33 ! Device end
02052 DSR_UNIT_CHK 34 ! Unit check
02053 DSR_UNIT_EXCEPT 35 ! Unit exception
02054 END WORD_10
02055
02056 WORD_10 TOPS10
02057 DX10_CSR
02058 CSR_PRG_STAT 24 ! Program status
02059 CSR_TYPE 25-26 ! Cause/type of last status in DSR
02060 CSR_SEL_ERR 27 ! Device didn't respond
02061 CSR_SEQ_ERR 28 ! Sequence error
02062 CSR_PAR_ERR 29 ! Device parity error
02063 CSR_LEN_ERR 30 ! Length error
02064 CSR_IGN_LEN_ERR 31 ! Ignore length error
02065 CSR_UNUSED 32 !
02066 CSR_DSR_FLAG 33 ! Bit of interest in DSR
02067 CSR_SBYTE_RD_ERR 34 ! Error while reading sense byte
02068 CSR_OPI 35 ! Operation incomplete
02069 END WORD_10
02070
02071 !++
02072 !
02073 ! TM02 controller status block
02074 !
02075 !--
02076
02077 TABLE TOPS10
02078 CSB_TM02
02079 CONI_INITIAL 0 0-35
02080
02081 RHCS1_ERR 0 2-17 ! LH = RH11 CONTROL & STATUS 2
02082 RHCS2_ERR 0 20-35 ! RH = RH11 CONTROL & STATUS 1.
02083 CHAN_CNTRL_STAT 0 0-35 ! LH = LH CHANNEL STATUS 0 (RH20)
02084 ! RH = CONI RH for RH10/20
02085
02086 PTCR 1 0-35 ! RH20 PRIMARY TRANSFER CONTROL REG
02087 ! RH10 DATAI RHCR
02088 UBA_STATUS 1 0-35 ! RH11 UBA STATUS REGISTER
02089 UBA_STATUS_ERR 1 18-35 ! USED BY SUMMARIZE
02090 PBAR 2 0-35 ! RH20 PRIMARY BLOCK ADDRESS REGISTER
02091 ! RH10 DATAI RHDB
02092 UBA_MAP 2 0-35 ! RH11 UBA MAP REGISTER.
02093 LAST_COMMAND 3 0-35 ! LAST COMMAND ISSUED
02094 ! Unknown 4 0-17 !
02095 MB_CR 4 18-35 ! DEVICE CONTROL REGISTER
02096 ! Unknown 5 0-17 !
02097 MB_DS 5 18-35 ! DEVICE STATUS REGISTER
02098 ! Unknown 6 0-17 !
02099 MB_ERR 6 18-35 ! DEVICE ERROR REGISTER
02100 ! Unknown 7 0-17 !
02101 MB_MR 7 18-35 ! MAINTENANCE REGISTER
02102 ! Unknown 8 0-17 !
02103 MB_AS 8 18-35 ! ATTENTION SUMMARY REGISTER
02104 ! Unknown 9 0-17 !
02105 MB_FR_CNT 9 18-35 ! FRAME COUNT REGISTER
02106 ! Unknown 10 0-17 !
02107 MB_DT 10 18-35 ! DRIVE TYPE REGISTER
02108 ! Unknown 11 0-17 !
02109 MB_CHK_SUM 11 18-35 ! CHECKSUM REGISTER
02110 ! Unknown 12 0-17 !
02111 MB_SN 12 18-35 ! DRIVE SERIAL NUMBER REGISTER
02112 ! Unknown 13 0-17 !
02113 MB_TC 13 18-35 ! TAPE CONTROL REGISTER
02114 END TABLE
02115
02116 !++
02117 !
02118 ! TM78 controller status block
02119 !
02120 !--
02121
02122 TABLE TOPS10
02123 CSB_TM78
02124 TM78_U_CODE_REVS,_10 0 BODY-F ! TU78 U-CODE REVISION LEVELS (2 WORDS)
02125 CONI 2 0-35 ! RH20 CONI
02126 PTCR 3 0-35 ! RH20 PRIMARY TRANSFER CONTROL REG
02127 PBAR 4 0-35 ! RH20 PRIMARY BLOCK ADDRESS REGISTER
02128 LAST_COMMAND 5 0-35 ! LAST COMMAND ISSUED
02129 TM78_CAS_REGS,_10 6 BODY-R ! CAS REGISTERS 0-21 FOR TU78
02130 TM78_SENSE_BYTES,_10 24 BODY-F ! 60 8-BIT BYTES IN 15 WORDS
02131 END TABLE
02132
02133 !++
02134 ! TM78 micro-code version
02135 !__
02136
02137 TABLE TOPS20
02138 TM78_U_CODE_REVS
02139 UCODE_1 0 0-35
02140 UCODE_2 1 0-35
02141 END TABLE
02142
02143 !++
02144 !
02145 ! TM78 Masbuss Registers (Common Address Space)
02146 ! First 2 bits unused
02147 !
02148 !--
02149
02150 TABLE TOPS10 TOPS20
02151 TM78_CAS_REGS
02152 CMD_CAS_0 0 ! 20-35 ! Data transfer function reg.
02153 DST_CAS_1 1 ! 20-35 ! Interrupt and failure code reg.
02154 CNT_CAS_2 2 ! 20-35 ! Record count, skip count amd format
02155 DG1_CAS_3 3 ! 20-35 ! Error msg nr and diag test nr.
02156 ATN_CAS_4 4 ! 20-35 ! Attention bits
02157 BCT_CAS_5 5 ! 20-35 ! Byte count. When this register is
02158 ! used in a write or write with
02159 ! extended IRG operation it is set by
02160 ! the program to the 2's complement
02161 ! of the number of bytes to be written
02162 ! on tape. This register becomes 0
02163 ! after the last byte of the record
02164 ! has been read from memory. When
02165 ! this register is used in a read
02166 ! operation, it is set to a number
02167 ! equal to or greater than the 2's
02168 ! comlement of the number of bytes
02169 ! to be loaded into memory. A record
02170 ! length error occurs for long records
02171 ! only. This happens when a read pulse
02172 ! for data occurs and the Word Count
02173 ! Register is 0.
02174 ! When the Byte Count Register is used
02175 ! in a space forward or space reverse
02176 ! operation, it is set to the 2's
02177 ! complement of the number of records
02178 ! to be spaced.
02179 DTR_CAS_6 6 ! 20-35 ! Drive type (101) in bits 8-0
02180 STA_CAS_7 7 ! 20-35 ! Drive status reg. or Sense reg.
02181 SER_CAS_10 8 ! 20-35 ! Serial no. reg.
02182 DG2_CAS_11 9 ! 20-35 ! Diagnostic reg.
02183 DG3_CAS_12 10 ! 20-35 ! Diagnostic reg.
02184 NST_CAS_13 11 ! 20-35 ! Non-data transfer int. code
02185 NC1_CAS_14 12 ! 20-35 ! Tape control register.
02186 ! Non_data transfer function code 0
02187 ! There are four tape control
02188 ! registers one register for each
02189 ! transport.
02190 NC2_CAS_15 13 ! 20-35 ! Non_data transfer function code 1
02191 NC3_CAS_16 14 ! 20-35 ! Non_data transfer function code 2
02192 NC4_CAS_17 15 ! 20-35 ! Non_data transfer function code 3
02193 MPA_CAS_20 16 ! 20-35 ! u-code internal address
02194 ! The Internal Address Register contains
02195 ! the address of the current address
02196 ! being asserted by the microcomputer.
02197 MPD_CAS_21 17 ! 20-35 ! Control register
02198 END TABLE
02199
02200 WORD_11 COMMON
02201 CMD_CAS_0
02202 CMD_SPL_COND 15 ! Special condition. Read only. Set
02203 ! by TRE, ATTN, or I/O bus control
02204 ! parity error. Cleared by Unibus A
02205 ! INIT, controller clear, or by
02206 ! removing the ATTN condition.
02207 CMD_TRAN_ERR 14 ! Transfer error. Read/write. Set by
02208 ! DLT, WCE, UPE, NED, NEM, PGE, MXF,
02209 ! MDPE, or a drive error during a
02210 ! data transfer. Cleared by Unibus A
02211 ! INIT, controller clear, error clear,
02212 ! or loading a data transfer command
02213 ! with GO set.
02214 CMD_MCPE 13 ! Mass I/O bus control bus parity
02215 ! error Read only. Set by parity error
02216 ! on control bus while writing a
02217 ! remote register. Cleared by TM
02218 ! clear.
02219 ! Parity errors that occur on the I/O
02220 ! control bus while writing a drive
02221 ! register are detected by the drive
02222 ! and cause the PAR error
02223 ! (Error reg. bit 03) to set.
02224 ! Bit 12 not used. Always zero.
02225 CMD_DR_AVAIL 11 ! Drive available. Read only. Always
02226 ! a 1 in the TM78 when read from an
02227 ! existing drive.
02228 CMD_PORTSEL 10 ! When PSEL = 1, data transfer is via
02229 ! Unibus B; when PSEL = 0, data transfer
02230 ! is via Unibus A. Cleared by Unibus
02231 ! A INIT, controller clear, or by
02232 ! writing a 0 in this bit position.
02233 CMD_A17 09 ! Upper extension bits of the BUS
02234 CMD_A16 08 ! Address Register. Cleared by Unibus
02235 ! A INIT, controller clear or by
02236 ! writing 0s in these bit positions.
02237 CMD_READY_DT 07 ! RDY normally = 1. During data
02238 ! transfers, RDY = 0.
02239 ! When a data transfer command code
02240 ! is written into the control and
02241 ! status register RDY is reset. At
02242 ! the termination of the data transfer,
02243 ! RDY is set.
02244 CMD_INT_EN 06 ! Interrupt enable. IE is a control bit
02245 ! which can be set only under program
02246 ! control. When IE = 1, an interrupt
02247 ! may occur due to RDY or ATTN being
02248 ! asserted. Cleared by Unibus A INIT,
02249 ! controller clear, or automatically
02250 ! cleared when a interrupt is recognized
02251 ! by the CPU. When a 0 is written into
02252 ! IE by the program, pending interrupts
02253 ! are cancelled.
02254 CMD_FUNC_CODE 05-01 ! Function codes.
02255 CMD_GO_BIT 00 ! The GO bit must be set to cause the
02256 ! controller or drive to respond to a
02257 ! command. The GO bit is reset by the
02258 ! drive after command execution.
02259 END WORD_11
02260
02261 WORD_11 COMMON
02262 DST_CAS_1
02263 CAS_FAIL_CODE 15-10 ! Failure code on data transfer
02264 CAS_INT_CODE 05-00 ! Interrupt code on data transfer
02265 END WORD_11
02266
02267 WORD_11 COMMON
02268 CNT_CAS_2
02269 CNT_SER 15 ! If the TM78 detects an error that
02270 ! requires a retry, the tape will be
02271 ! repositioned for the retry operation
02272 ! unless SER is set. If SER is not
02273 ! set, the TM78's error recovery
02274 ! algorithms inform the host CPU of
02275 ! the next operation to perform via
02276 ! the interrupt code.
02277 CNT_FORMAT 14-12 ! The FORMAT field defines the manner
02278 ! in which tape bytes are assembled
02279 ! to/from the host CPU words. The
02280 ! following is a list of the possible
02281 ! formats
02282 ! FORMAT MODE
02283 ! 000 11 NORMAL
02284 ! 001 15 NORMAL
02285 ! 010 10 Compatible
02286 ! 011 10 Core Dump
02287 ! 100 10 High Density
02288 ! Compatible
02289 ! 101 Image
02290 ! 110 10 High Density Dump
02291 CNT_SKIP_CNT 11-08 ! Skip Count is used during tape read
02292 ! operations to zero-fill the specified
02293 ! number of byte positions before
02294 ! reading the first data byte. These
02295 ! zero-filled bytes are transferred
02296 ! from the TM78 even if no data bytes
02297 ! are read(because of an error).
02298 CNT_REC_CNT 07-02 ! The Record Count specifies the
02299 ! number of record to read or write
02300 ! and may be any value in the range
02301 ! of 0 to 77 . When non-zero, it is
02302 ! 8
02303 ! decremented after every record that
02304 ! is correctly transferred.
02305 ! When record count is equal to zero
02306 ! the TM78 transfers records until
02307 ! stopped by the Massbus controller.
02308 ! The RH20, which has its own block
02309 ! counter, may be operated with REcord
02310 ! Count set to zero.
02311 ! Record Count is not decremented during
02312 ! unsuccessful error retry operations
02313 ! so it does not have to be reloaded
02314 ! after an error, unless the TM78 issues
02315 ! a read opposite interrupt code. In
02316 ! this case, the record count should be
02317 ! set to 0.
02318 CNT_CMD_ADR 01-00 ! Identifies the tape transport.
02319 END WORD_11
02320
02321 WORD_11
02322 DTR_CAS_6
02323 DTR_NSA 15 ! always 1
02324 DTR_TAP 14 ! always 1
02325 DTR_MOH 13 ! always 0
02326 DTR_7CH 12 ! always 0
02327 DTR_DMD 11 ! dual massbus option.
02328 ! If set this TM78 has the dual massbus
02329 ! ports option.
02330 ! bits 10-9 not used.
02331 ! The drive type code for a TU78 Tape
02332 ! drive is 101
02333 ! 8
02334 END WORD_11
02335
02336 WORD_11 COMMON
02337 STA_CAS_7
02338 STA_RDY 15 ! The tape unit has a tape mounted,
02339 ! is on-line, and not rewinding or
02340 ! performing a DSE.
02341 STA_PRES 14 ! The tape unit has power applied.
02342 STA_ON_L 13 ! The tape unit is on-line, and a tape
02343 ! is mounted.
02344 STA_REWIND 12 ! The tape unit is rewinding.
02345 STA_PE 11 ! WHen set, the tape unit is set foR
02346 ! PE recording format. When clear, the
02347 ! tape unit is set for GCR recording
02348 ! format.
02349 STA_BOT 10 ! The tape is positioned at load point.
02350 STA_EOT 09 ! The tape is positioned beyond the
02351 ! end-of-tape marker.
02352 STA_FPT 08 ! The tape unit is write protected.
02353 STA_AVAIL 07 ! The tape unit is available to this
02354 ! massbus.
02355 STA_SHR 06 ! The tape unit is available to both
02356 ! Massbus ports (shared)
02357 STA_MAINT 05 ! The tape unit is in maintenance mode,
02358 ! and may not be used.
02359 STA_DSE 04 ! The tape unit is performing the
02360 ! erase portion of DSE Command.
02361 END WORD_11
02362
02363 WORD_11
02364 NC1_CAS_14
02365 NC1_CMD_CNT 15-08 ! The command count specifies the
02366 ! number of times the command is to
02367 ! be repeated (up to 376, octal). If
02368 ! the operation terminates prematurely
02369 ! the command count contains the no.
02370 ! of operations that did not complete
02371 ! successfully. A command count of 0
02372 ! or 1 may be used to specify a single
02373 ! operation.
02374 ! The GO bit informs the TM78 that
02375 ! a new Command has been loaded. The
02376 ! GO bit is not intended to serve
02377 ! as a status bit as the readability
02378 ! is undefined.
02379 NC1_FUNC_CODE0 05-01 ! function code.
02380 END WORD_11
02381
02382 WORD_11 COMMON
02383 NC2_CAS_15
02384 NC2_CMD_CNT1 15-08 ! Command count
02385 FUNC_CODE1 05-01 ! Function code
02386 END WORD_11
02387
02388 WORD_11 COMMON
02389 NC3_CAS_16
02390 NC3_FUNC_CODE2 05-01 ! Function code
02391 END WORD_11
02392
02393 WORD_11 COMMON
02394 NC4_CAS_17
02395 NC4_CMD_CNT3 15-08 ! Command count
02396 NC4_FUNC_CODE3 05-01 ! Function code
02397 END WORD_11
02398
02399 WORD_11 COMMON
02400 MPD_CAS_21
02401 MPD_TM_RDY 15 ! TM RDY occurs after microcode
02402 ! initialization. New commands may
02403 ! not be loaded until TM RDY is set.
02404 MPD_TM_CLR 14 ! TM Clear initializes the TM78. This
02405 ! restarts the microcomputer and
02406 ! terminates any command that may have
02407 ! been previously loaded.
02408 MPD_CM_PE 13 ! A microcomputer Rom Parity error
02409 ! has occurred.
02410 MPD_ILR 12 ! A reference has been made to a
02411 ! non-existent massbus register address
02412 MPD_CPE 11 ! The TM78 has detected a parity error
02413 ! as a result of a write to some massbu
02414 ! register address.
02415 MPD_EV_PAR 10 ! A diagnostic bit which causes even
02416 ! parity to be generated and checked
02417 ! for on the massbus control bus.
02418 MPD_HLDA 09 ! The stopped condition is indicated
02419 ! by the HLDA bit being set after a
02420 ! small delay.
02421 MPD_HOLD 08 ! The microcomputer may be stopped by
02422 ! setting the HOLD bit.
02423 MPD_INT_DATA 07-00 ! If HLDA is not set, Internal Data
02424 ! always reads as a zero. If HLDA is
02425 ! set the Internal Address Structure
02426 ! of the TM78 maybe accessed via the
02427 ! Internal Address and Internal Data
02428 ! Registers. These then contain the
02429 ! current address being asserted by
02430 ! the microcomputer.
02431 END WORD_11
02432
02433 TABLE TOPS_10 TOPS_20
02434 TM78_SENSE_BYTES
02435 CMDCOD 0 10-17
02436 INTCOD 0 2-9
02437 FALCOD 0 28-35
02438 RPFAIL 0 20-27
02439 RPATH 1 10-17
02440 RSTAT 1 2-9
02441 RCMLP 1 28-35
02442 RAMT 1 20-27
02443 RDON 2 10-17
02444 RILL 2 2-9
02445 RMK2 2 28-35
02446 REND 2 20-27
02447 RPSTA 3 10-17
02448 RPOSTN 3 2-9
02449 RDATA 3 28-35
02450 CRCWRD 3 20-27
02451 ECCOR 4 10-17
02452 ECCSTA 4 2-9
02453 CH0TIE 4 28-35
02454 CH1TIE 4 20-27
02455 CH2TIE 5 10-17
02456 CH3TIE 5 2-9
02457 CH4TIE 5 28-35
02458 CH5TIE 5 20-27
02459 CH6TIE 6 10-17
02460 CH7TIE 6 2-9
02461 CHPTIE 6 28-35
02462 RTIER 6 20-27
02463 TAMT 7 10-17
02464 PSTAT 7 2-9
02465 PRDD 7 28-35
02466 CASSTA 7 20-27
02467 CBUSSTA 8 10-17
02468 DBUSSTA 8 2-8
02469 WMCSTA 8 28-35
02470 TUSEL0 8 20-27
02471 TUSEL1 9 10-17
02472 WRTDAT 9 2-9
02473 BYT1_CNT 9 28-35
02474 BYT2_CNT 9 20-27
02475 PAD1_CNT 10 10-17
02476 PAD2_CNT 10 2-9
02477 ERR1_CNT 10 28-35
02478 ERR2_CNT 10 20-27
02479 DDR_A 11 10-17
02480 DDR_B 11 2-9
02481 WMCERR 11 28-35
02482 INTSTA 11 20-27
02483 TUSTAT 12 10-17
02484 MIAA_STAT 12 2-9
02485 MIAB_STAT 12 28-35
02486 SER_A_NR 12 20-27
02487 SER_B_NR 13 10-17
02488 TUDIAG 13 2-9
02489 RET1_CNT 13 28-35
02490 RET2_CNT 13 20-27
02491 TUX 14 10-17
02492 XFRCTL 14 2-9
02493 XRETRY 14 28-35
02494 ENAON 14 20-27
02495 END TABLE
02496
02497 ! Sense byte 1
02498
02499 WORD_11 COMMON
02500 CMDCOD
02501 CMD_CODE 7 - 0 ! Command code being executed
02502 ! on last error.
02503 END WORD_11
02504
02505 ! Sense byte 2
02506
02507 WORD_11 COMMON
02508 INTCOD
02509 INT_CODE 7 - 0 ! Interrupt code from last error
02510 END WORD_11
02511
02512 ! Sense byte 3
02513
02514 WORD_11 COMMON
02515 FALCOD
02516 FAIL_CODE 7 - 0 ! Failure code from last error
02517 END WORD_11
02518
02519
02520 ! Sense byte 4 (M8950 via M8953)
02521
02522 WORD_11 COMMON
02523 RPFAIL
02524 WFAIL_0 00 ! Write fail bit from REad channel 0
02525 ! Write fail is an OR of certain
02526 ! error conditions namely:
02527 ! Illegal 5 to 4 translation
02528 ! AMTIE
02529 ! PHTIE
02530 ! Pointer mismatch
02531 WFAIL_1 01 ! Write fail bits from read channel 1
02532 ! Write fail is an OR of certain
02533 ! error conditions namely:
02534 ! Illegal 5 to 4 translation
02535 ! AMTIE
02536 ! PHTIE
02537 ! Pointer mismatch
02538 WFAIL_2 02 ! Write fail bits from read channel 2
02539 ! Write fail is an OR of certain
02540 ! error conditions namely:
02541 ! Illegal 5 to 4 translation
02542 ! AMTIE
02543 ! PHTIE
02544 ! Pointer mismatch
02545 WFAIL_3 03 ! Write fail bits from read channel 3
02546 ! Write fail is an OR of certain
02547 ! error conditions namely:
02548 ! Illegal 5 to 4 translation
02549 ! AMTIE
02550 ! PHTIE
02551 ! Pointer mismatch
02552 WFAIL_4 04 ! Write fail bits from read channel 4
02553 ! Write fail is an OR of certain
02554 ! error conditions namely:
02555 ! Illegal 5 to 4 translation
02556 ! AMTIE
02557 ! PHTIE
02558 ! Pointer mismatch
02559 WFAIL_5 05 ! Write fail bits from read channel 5
02560 ! Write fail is an OR of certain
02561 ! error conditions namely:
02562 ! Illegal 5 to 4 translation
02563 ! AMTIE
02564 ! PHTIE
02565 ! Pointer mismatch
02566 WFAIL_6 06 ! Write fail bits from read channel 6
02567 ! Write fail is an OR of certain
02568 ! error conditions namely:
02569 ! Illegal 5 to 4 translation
02570 ! AMTIE
02571 ! PHTIE
02572 ! Pointer mismatch
02573
02574 WFAIL_7 07 ! Write fail bits from read channel 7
02575 ! Write fail is an OR of certain
02576 ! error conditions namely:
02577 ! Illegal 5 to 4 translation
02578 ! AMTIE
02579 ! PHTIE
02580 ! Pointer mismatch
02581
02582 END WORD_11
02583
02584 ! Sense byte 5 (M5953)
02585
02586 WORD_11 COMMON
02587 RPATH
02588 WRITE_FAIL_P 00 ! Illegal 5 - 4 AMTIE, PHTIE or
02589 ! pointer mismatch for parity bit
02590 STAT_SELECT 01 ! True if TIE bus statistics are
02591 ! being sent to TIE bus
02592 CLOCK_STOPPED 02 ! True if Read Path clock is stopped
02593 BOP 03 ! Beginning of Preamble. True when Read
02594 ! path senses that the Preamble has
02595 ! just passed the Read Head.
02596 DATA_READY 04 ! Goes false when M8953 asserts data
02597 ! ready to M8951
02598 PREAMBLE_ERR 05 ! True if Preamble had AMTIE
02599 STATUS_VALID 06 ! M8953 status is valid (set after
02600 ! .1 inch gap found)
02601 VEL_OK 07 ! True if velocity is within 10%
02602 ! of 125 IPS or JAM velocity OK bit
02603 ! is set
02604 END WORD_11
02605
02606 ! Sense byte 6
02607
02608 WORD_11 COMMON
02609 RSTAT
02610 RMC_STATUS 7-0 ! Read path microcontroller status
02611 ! codes are returned in this byte.
02612 ! The following table identifies
02613 ! each code and its meaning:
02614 ! STATUS MEANING
02615 !
02616 ! Status resulting from ECC self test
02617 ! command
02618 ! 101 ECC sequencer passed self test
02619 ! 102 ECC sequencer failed self test
02620
02621 ! Status resulting from an M8953 self
02622 ! test
02623 ! 103 Read path passed self test
02624 ! 104 Read path failed self test
02625
02626 ! Status resulting from an M8950 self
02627 ! test
02628 ! 105 Read channel tests all passed
02629
02630 ! Status resulting from a clear all test ! command for velocity testing of drive
02631 ! by microcode
02632 ! 1 First tach pulse
02633 ! 201 Last tach pulse
02634
02635 ! Status resulting from a sample density
02636 ! command
02637 ! 210 Not Capable found
02638 ! 211 GCR ID found
02639 ! 212 PE ID found
02640
02641 ! Status resulting from a write test
02642 ! of IBG, PE ID, GCR ID, ARA ID, or
02643 ! ARA Burst.
02644 ! 220 Bad status (write test)
02645
02646 ! Status resulting from a tape mark
02647 ! test command
02648 ! 222 Good tape mark found on tape
02649 ! status
02650
02651 ! Status resulting a NON BOT command
02652 ! (read or write FWD or REV, GCR or PE)
02653 ! 230 ARA ID found (not record or TM)
02654 ! 231 Tape Mark found
02655 ! 234 Preamble end not found
02656 ! 235 Read path fault 1, too many
02657 ! M8950's have been fataled to
02658 ! continue record processing
02659 ! 236 Read path fault 2, 7 or more
02660 ! M8950 boards found illegal 5-4
02661 ! translations
02662 ! 241 Unexpected IBG in data;
02663 ! probably creased tape(7 or
02664 ! more AMTIES active)
02665 ! 261 Postamble long
02666 ! 262 Postamble short
02667 ! 377 OK
02668 END WORD_11
02669
02670 ! Sense byte 7( RMC commands Loop Back Register, M8953)
02671
02672 WORD_11 COMMON
02673 RCMLP
02674 RMC_CMD 7-0 ! Contains the last command sent to
02675 ! the M8953 via 'RCMD'
02676 ! The Read Microcontroller commands
02677 ! and their codes are:
02678 ! Code Task
02679 ! 00 NOP
02680 ! 01 Interblock read
02681 ! 02 Test PE ID burst
02682 ! 03 Test GCR ID burst
02683 ! 04 Test ARAID burst
02684 ! 05 Test TM
02685 ! 06 Test ARA burst
02686 ! 07 Normal NON_BOT read
02687 ! 10 Run RMC self test
02688 ! 11 Test unknown ID Burst
02689 ! 12 Run read channel micro's test
02690 ! 13 Diagnostic read command
02691 ! 14 Run read channel self test
02692 ! 15 Run clear all RMC test pgm
02693 ! 16 Run ECC self test pgm
02694 ! 17 Find gap
02695
02696 END WORD_11
02697
02698 ! Sense byte 8 (read channel AMTIE status ;location is tape transport
02699 ! via M8955, M8950, M8953)
02700
02701
02702 WORD_11 COMMON
02703 RAMT
02704 AMTIE 7-0 ! This reg. reflects the state of the
02705 ! AMTIE lines for channels 7 thro 0.
02706
02707 END WORD_11
02708
02709 ! Sense byte 9 (read channel DONE status; location is M8950's via M8953)
02710
02711 WORD_11 COMMON
02712 RDON
02713 NOT_DONE_0 0 ! This bit will be false if the
02714 ! associated M8950 has completed
02715 ! its assigned task.
02716 NOT_DONE_1 1 ! This bit will be false if the
02717 ! associated M8950 has completed
02718 ! its assigned task.
02719 NOT_DONE_2 2 ! This bit will be false if the
02720 ! associated M8950 has completed
02721 ! its assigned task.
02722 NOT_DONE_3 3 ! This bit will be false if the
02723 ! associated M8950 has completed
02724 ! its assigned task.
02725 NOT_DONE_4 4 ! This bit will be false if the
02726 ! associated M8950 has completed
02727 ! its assigned task.
02728 NOT_DONE_5 5 ! This bit will be false if the
02729 ! associated M8950 has completed
02730 ! its assigned task.
02731 NOT_DONE_6 6 ! This bit will be false if the
02732 ! associated M8950 has completed
02733 ! its assigned task.
02734 NOT_DONE_7 7 ! This bit will be false if the
02735 ! associated M8950 has completed
02736 ! its assigned task.
02737 END WORD_11
02738
02739 ! Sense byte 10 (read channel illegal status; location M8950 via M8953)
02740
02741 WORD_11 COMMON
02742 RILL
02743 ILL_0 0 ! This bit will be true if the
02744 ! associated M8950 indicates the
02745 ! following:
02746 ! GCR
02747 ! ---
02748 ! Data contained an illegal 5-bit code
02749 ! which was either an error or a tape
02750 ! format control character.
02751 ! PE
02752 ! --
02753 ! Data error such as no bit time phase
02754 ! transition.
02755 ILL_1 1 ! ''
02756 ILL_2 2 ! ''
02757 ILL_3 3 ! ''
02758 ILL_4 4 ! ''
02759 ILL_5 5 ! ''
02760 ILL_6 6 ! ''
02761 ILL_7 7 ! ''
02762
02763 END WORD_11
02764
02765 ! Sense byte 11 (read channel mark 2 status; location M8950's via M8953)
02766
02767 WORD_11 COMMON
02768 RMK2
02769 MK2_0 0 ! When true indicates that the
02770 ! associated M8950 has detected
02771 ! a 'MARK 2' tape format control
02772 ! character. If the corresponding
02773 ! 'illegal 5 to 4' bit is set (RILL reg)
02774 ! a MARK 2 was detected during 5 to 4
02775 ! conversion.
02776 MK2_1 1 ! ''
02777 MK2_2 2 ! ''
02778 MK2_3 3 ! ''
02779 MK2_4 4 ! ''
02780 MK2_5 5 ! ''
02781 MK2_6 6 ! ''
02782 MK2_7 7 ! ''
02783
02784 END WORD_11
02785
02786 ! Sense byte 12 (End mark for read channels; location M8950's via M8953)
02787
02788 WORD_11 COMMON
02789 REND
02790 END_0 0 ! END Mark for read channel 0
02791 END_1 1 ! END Mark for read channel 1
02792 END_2 2 ! END Mark for read channel 2
02793 END_3 3 ! END Mark for read channel 3
02794 END_4 4 ! END Mark for read channel 4
02795 END_5 5 ! END Mark for read channel 5
02796 END_6 6 ! END Mark for read channel 6
02797 END_7 7 ! END Mark for read channel 7
02798
02799 END WORD_11
02800
02801 ! Sense byte 13 (Parity Read Channel Status Byte M8950)
02802
02803 WORD_11 COMMON
02804 RPSTA
02805 AMTIE_P 00 ! Weak amplitude on parity bit
02806 NOT_DONE_P 01 ! Parity M8950 not done
02807 ILLEGAL_P 02 ! Illegal 5:4 for parity bit
02808 MK2P 03 ! Mark 2 detected for parity bit
02809 END_P 04 ! End Mark detected for parity bit
02810 POST_P 05 ! PE Postamble detected for parity bit
02811 DATA_P 06 ! M8950 data output for parity bit
02812 CORRECTED_DATA_P 07 ! ECC module corrected output data
02813 ! for parity bit
02814
02815 END WORD_11
02816
02817 ! Sense byte 14 (read channel PE postamble detect reg.;
02818 ! location is M8950's via M8953)
02819
02820 WORD_11 COMMON
02821 RPOSTN
02822 POST_0 0 ! In PE: contains the inverted data
02823 ! for the byte prior to the one
02824 ! currently on the data lines (RC3 D(N)
02825 ! H). It is used for PE postamble
02826 ! detection.
02827 ! Not used in GCR
02828 POST_1 1 ! ''
02829 POST_2 2 ! ''
02830 POST_3 3 ! ''
02831 POST_4 4 ! ''
02832 POST_5 5 ! ''
02833 POST_6 6 ! ''
02834 POST_7 7 ! ''
02835 END WORD_11
02836
02837
02838 ! Sense byte 15 (read channel data register; location M8950's via M8953)
02839
02840 WORD_11 COMMON
02841 RDATA
02842 DATA_ECC 7-0 ! Data output from M8950 to ECC
02843 ! (M8951)
02844 END WORD_11
02845
02846 ! Sense byte 16 (CRC word; location M8952)
02847
02848 WORD_11 COMMON
02849 CRCWRD
02850 CRC_0 0 ! CRC checker output bits
02851 CRC_1 1 ! CRC checker output bits
02852 CRC_2 2 ! CRC checker output bits
02853 CRC_3 3 ! CRC checker output bits
02854 CRC_4 4 ! CRC checker output bits
02855 CRC_5 5 ! CRC checker output bits
02856 CRC_6 6 ! CRC checker output bits
02857 CRC_7 7 ! CRC checker output bits
02858 END WORD_11
02859
02860
02861 ! Sense byte 17 (Corrected data register; location M8951)
02862
02863 WORD_11 COMMON
02864 ECCOR
02865 CD_0 0 ! Corrected data output from M8951 to
02866 ! M8952 module
02867 CD_1 1 ! ''
02868 CD_2 2 ! ''
02869 CD_3 3 ! ''
02870 CD_4 4 ! ''
02871 CD_5 5 ! ''
02872 CD_6 6 ! ''
02873 CD_7 7 ! ''
02874 END WORD_11
02875
02876 ! Sense byte 18 (ECC Status Byte M8951)
02877
02878 WORD_11 COMMON
02879 ECCSTA
02880 STEC 00 ! Single track error correction
02881 TTEC 01 ! Two track error correction
02882 UNC 02 ! Uncorrectable. ECC could not
02883 ! correct data error
02884 PM 03 ! Pointer Mismatch. The track in
02885 ! error did not have a pointer.
02886 ACRCERR 04 ! ACRC Error
02887 AMT 05 ! AMTIE occurred during data
02888 ! portion of record
02889 RPE 06 ! ECC ROM Parity Error
02890 CRCE 07 ! CRC Error
02891 END WORD_11
02892
02893
02894 ! Sense byte 19 (Channel 1 Track-in-error byte M8950)
02895
02896 WORD_11 COMMON
02897 CH0TIE
02898 STAT 00 ! STAT = 0, Pointer mismatch
02899 ! in GCR, 0 in PE
02900 ! STAT = 1, Any pointer occurred
02901 ! (both GCR and PE)
02902 PHTIE0 01 ! Phase Tie
02903 AMTIE0 02 ! AMTIE
02904 PEGCRTK 03 ! Illegal 5:4 in GCR
02905 ! Dead track in PE
02906 END WORD_11
02907
02908 ! Sense byte 20 (Channel 2 Track-in-error byte M8950)
02909
02910 WORD_11 COMMON
02911 CH1TIE
02912 STAT 00 ! STAT = 0, Pointer mismatch
02913 ! in GCR, 0 in PE
02914 ! STAT = 1, Any pointer occurred
02915 ! (both GCR and PE)
02916 PHTIE1 01 ! Phase Tie
02917 AMTIE1 02 ! AMTIE
02918 PEGCRTK 03 ! Illegal 5:4 in GCR
02919 ! Dead track in PE
02920 END WORD_11
02921
02922
02923 ! Sense byte 21 (Channel 3 Track-in-error byte M8950)
02924
02925 WORD_11 COMMON
02926 CH2TIE
02927 STAT 00 ! STAT = 0, Pointer mismatch
02928 ! in GCR, 0 in PE
02929 ! STAT = 1, Any pointer occurred
02930 ! (both GCR and PE)
02931 PHTIE2 01 ! Phase Tie
02932 AMTIE2 02 ! AMTIE
02933 PEGCRTK 03 ! Illegal 5:4 in GCR
02934 ! Dead track in PE
02935
02936 END WORD_11
02937
02938
02939 ! Sense byte 22 (Channel 4 Track-in-error byte M8950)
02940
02941 WORD_11 COMMON
02942 CH3TIE
02943 STAT 00 ! STAT = 0, Pointer mismatch
02944 ! in GCR, 0 in PE
02945 ! STAT = 1, Any pointer occurred
02946 ! (both GCR and PE)
02947 PHTIE3 01 ! Phase Tie
02948 AMTIE3 02 ! AMTIE
02949 PEGCRTK 03 ! Illegal 5:4 in GCR
02950 ! Dead track in PE
02951
02952 END WORD_11
02953
02954
02955 ! Sense byte 23 (Channel 5 Track-in-error byte M8950)
02956
02957 WORD_11 COMMON
02958 CH4TIE
02959 STAT 00 ! STAT = 0, Pointer mismatch
02960 ! in GCR, 0 in PE
02961 ! STAT = 1, Any pointer occurred
02962 ! (both GCR and PE)
02963 PHTIE4 01 ! Phase Tie
02964 AMTIE4 02 ! AMTIE
02965 PEGCRTK 03 ! Illegal 5:4 in GCR
02966 ! Dead track in PE
02967
02968 END WORD_11
02969
02970
02971 ! Sense byte 24 (Channel 6 Track-in-error byte M8950)
02972
02973 WORD_11 COMMON
02974 CH5TIE
02975 STAT 00 ! STAT = 0, Pointer mismatch
02976 ! in GCR, 0 in PE
02977 ! STAT = 1, Any pointer occurred
02978 ! (both GCR and PE)
02979 PHTIE5 01 ! Phase Tie
02980 AMTIE5 02 ! AMTIE
02981 PEGCRTK 03 ! Illegal 5:4 in GCR
02982 ! Dead track in PE
02983 END WORD_11
02984
02985
02986 ! Sense byte 25 (Channel 7 Track-in-error byte M8950)
02987
02988 WORD_11 COMMON
02989 CH6TIE
02990 STAT 00 ! STAT = 0, Pointer mismatch
02991 ! in GCR, 0 in PE
02992 ! STAT = 1, Any pointer occurred
02993 ! (both GCR and PE)
02994 PHTIE6 01 ! Phase Tie
02995 AMTIE6 02 ! AMTIE
02996 PEGCRTK 03 ! Illegal 5:4 in GCR
02997 ! Dead track in PE
02998 END WORD_11
02999
03000
03001
03002 ! Sense byte 26 (Channel 8 Track-in-error byte M8950)
03003
03004 WORD_11 COMMON
03005 CH7TIE
03006 STAT 00 ! STAT = 0, Pointer mismatch
03007 ! in GCR, 0 in PE
03008 ! STAT = 1, Any pointer occurred
03009 ! (both GCR and PE)
03010 PHTIE7 01 ! Phase Tie
03011 AMTIE7 02 ! AMTIE
03012 PEGCRTK 03 ! Illegal 5:4 in GCR
03013 ! Dead track in PE
03014 END WORD_11
03015
03016
03017 ! Sense byte 27 (Channel P Track-in-error byte M8950)
03018
03019 WORD_11 COMMON
03020 CHPTIE
03021 STAT 00 ! STAT = 0, Pointer mismatch
03022 ! in GCR, 0 in PE
03023 ! STAT = 1, Any pointer occurred
03024 ! (both GCR and PE)
03025 PHTIEP 01 ! Phase Tie
03026 AMTIEP 02 ! AMTIE
03027 PEGCRTK 03 ! Illegal 5:4 in GCR
03028 ! Dead track in PE
03029
03030 END WORD_11
03031
03032 ! Sense byte 28 (read channel TIE bus register; location M8953)
03033
03034 WORD_11 COMMON
03035 RTIER
03036 TIE_BUS_0 0 ! Reads TIE bus without enabling
03037 ! any M8950 modules. If JAM TIE
03038 ! bus (in address 011-W bit 7)
03039 ! is set then the value written into
03040 ! address 012-W is read.
03041 TIE_BUS_1 1 ! ''
03042 TIE_BUS_2 2 ! ''
03043 TIE_BUS_3 3 ! ''
03044
03045 END WORD_11
03046
03047 ! Sense byte 29 (AMTIE word; location M8955 TUP 2, 4)
03048
03049 WORD_11 COMMON
03050 TAMT
03051 TU_AMTIE 7-0 ! This register reflects info on
03052 ! TU bus AMTIE 7:0 L
03053
03054 END WORD_11
03055
03056
03057 ! Sense byte 30 (TU port status byte M8955)
03058
03059 WORD_11 COMMON
03060 PSTAT
03061 AMTIE_P 00 ! TU bus AMTIE Parity
03062 RDP 01 ! TU bus RD P line
03063 WCSP 02 ! TU bus WCS P line
03064 TACK 03 ! TU bus tachometer line
03065 TUPRES 04 ! Tape unit present. Indicates that
03066 ! a TU78 transport is physically
03067 ! cabled to this TU port.
03068 CMDPE 05 ! WCS command parity error during
03069 ! a TM78 command or command/status
03070 ! address write.
03071 WR_DATA_STROBE 06 ! TU bus WDS
03072 STAT_PE 07 ! WCS status parity error has occurred
03073 ! when reading a TU78 register
03074 ! over the WCS lines.
03075 END WORD_11
03076
03077
03078 ! Sense byte 31 (port read data word)
03079
03080 WORD_11 COMMON
03081 PRDD
03082 READ_DATA 7-0 ! This reg. reflects the info
03083 ! on TU BUS RD 7:0 L
03084 END WORD_11
03085
03086 ! Sense byte 32 (CAS port (n) status byte)
03087
03088 WORD_11 COMMON
03089 CASSTA
03090 DRADR 2-0 ! Massbus drive address for
03091 ! this port
03092 ATA 03 ! Attention active. The host computer
03093 ! has not completed the ATTN.
03094 ! interrupt servicing routine yet
03095 ILR_CAS 04 ! Illegal Massbus register referenced
03096 CASPE 05 ! CAS/Massbus C bus parity error has
03097 ! been detected on a write to TM78.
03098 TMRDY 06 ! This massbus port is ready to
03099 ! accept a command from the host
03100 ! computer.
03101 CONTEN 07 ! CAS contention error. Both the
03102 ! host computer and
03103 ! the microcomputer (M8960) tried
03104 ! to access the common address space
03105 ! at the same time.
03106
03107 END WORD_11
03108
03109 ! Sense byte 33 (Massbus C bus status byte)
03110
03111 WORD_11 COMMON
03112 CBUSSTA
03113 ONLINE 00 ! Massbus port is on-line
03114 V5OK 01 ! When true indicates that
03115 ! the -5 volts power supply for
03116 ! Massbus receivers is operating.
03117 LEFT 02 ! reflects the status of the
03118 ! write microcontroller LEFT line
03119 MBFAIL 03 ! Massbus fail. When HI indicates
03120 ! a controller Power failure or
03121 ! no Massbus connected to this port.
03122 MBINIT 04 ! Massbus initialize line status
03123 MBDEM 05 ! Massbus demand line status
03124 MBTRA 06 ! Massbus transfer line status
03125 MBATTN 07 ! Massbus attention line status
03126
03127 END WORD_11
03128
03129 ! Sense byte 34 (Massbus D bus status byte)
03130
03131 WORD_11 COMMON
03132 DBUSSTA
03133 MBSCLK 00 ! Massbus sync clock line status
03134 WMCSCLK 01 ! WMC SCLK or hardware reg 300-w bit 0
03135 MBRUN 02 ! Massbus run line
03136 MBEXC 03 ! Massbus exception line status
03137 MBEBL 04 ! Massbus end of block line status
03138 MBOCC 05 ! Massbus occupied line status
03139 MBWCLK 06 ! Massbus write clock line status
03140 MBWREN 07 ! Port write enabled
03141
03142 END WORD_11
03143
03144 ! Sense byte 35 (write microcontroller status; location M8959)
03145
03146 WORD_11 COMMON
03147 WMCSTA
03148 XMC_WCLK 00 ! Reflects true state of translator
03149 ! write clock pulse(110 ns at normal
03150 ! speed)
03151 RES_WMC_DRBUS 01 ! Residual To WMC DR Bus.
03152 ! Gates HI or LO nibble of residual
03153 ! character to WMC DR BUS.
03154 ACRC_WMC_DRBUS 02 ! ACRC to WMC DR BUS.
03155 ! Gates HI or LO nibble of ACRC
03156 ! character to WMC DR Bus.
03157 CRC_WMC_DRBUS 03 ! Gates HI or LO nibble of CRC
03158 ! character to WMC DR Bus.
03159 ECC_WMC_DRBUS 04 ! Gates HI or LO nibble of ECC
03160 ! character to WMC DR Bus.
03161 TRANS 05 ! Transfer. Shifts one nibble
03162 ! on WMC DR bus into Translator.
03163 WMC_NOT_DONE 06 ! 0 = Write microcontroller done
03164 ! writing PE data or GCR data
03165 ! groups.(used in diagnostic single
03166 ! step node; normally appears for
03167 ! 110 ns.)
03168 ! 1 = Write microcontroller busy
03169 ! or idle.
03170 XMC_NOT_DONE 07 ! 0 = Translator microcontroller
03171 ! done writing postamble and
03172 ! waiting to be serviced.
03173 ! 1 = Translator Busy.
03174 END WORD_11
03175
03176
03177 ! Sense byte 36 (Tape unit port 0/1 select; location M8955, Port 0/1, Slot 08)
03178
03179 WORD_11
03180 TUSEL0
03181 TUNIT_SEL 1 - 0 ! A two bit binary field which
03182 ! reflects the Tape Unit Port
03183 ! currently selected by the MBSEL
03184 ! register (340-w bits 1:0)
03185 TPORT1_WR_EN 2 ! When true indicates that the
03186 ! Write Path for Tape Unit Port
03187 ! 1 is enabled.
03188 TPORT0_WR_EN 3 ! When true indicates that the
03189 ! Write Path for Tape Unit Port
03190 ! 0 is enabled.
03191 TPORT1_RD_EN 4 ! When true indicates that the
03192 ! Read Path for Tape Unit Port 1
03193 ! is enabled.
03194 TPORT0_RD_EN 5 ! When true indicates that the
03195 ! REad Path for Tape Unit Port 0
03196 ! is enabled.
03197 NOT_BYTE_TER_CNT 6 ! 0 = Write microcontroller Byte
03198 ! Count Terminal Count asserted.
03199 SINGLE_TPORT 7 ! 0 = Both TUP modules are installed
03200 ! in backplane slots 08/09
03201 ! 1 = Only one TUP module installed
03202 ! in backplane slot 08.
03203 END WORD_11
03204
03205
03206 ! Sense byte 37 (Tape unit port 2/3 select; location M8955, Port 2/3 Slot 09)
03207
03208 WORD_11 COMMON
03209 TUSEL1
03210 TUNIT_SEL1 1 - 0 ! A two bit binary field which
03211 ! reflects the Tape Unit Port
03212 ! currently selected by the MBSEL
03213 ! register (340-w bits 1:0)
03214 TPORT3_WR_EN 2 ! When true indicates that the
03215 ! Write Path for Tape Unit Port
03216 ! 3 is enabled.
03217 TPORT2_WR_EN 3 ! When true indicates that the
03218 ! Write Path for Tape Unit Port
03219 ! 2 is enabled.
03220 TPORT3_RD_EN 4 ! When true indicates that the
03221 ! Read Path for Tape Unit Port 3
03222 ! is enabled.
03223 TPORT2_RD_EN 5 ! When true indicates that the
03224 ! REad Path for Tape Unit Port 2
03225 ! is enabled.
03226 ! Bits 7:6 are not used.
03227 END WORD_11
03228
03229
03230 ! Sense byte 38 (write data; location M8959)
03231
03232 WORD_11 COMMON
03233 WRTDAT
03234 WR_DATA 7-0 ! Looks at write or read data on
03235 ! the intermediate DRD bus.
03236 END WORD_11
03237
03238
03239 ! Sense byte 39 (Byte counter HI/LO; location M8959)
03240
03241 WORD_11 COMMON
03242 BYT1_CNT
03243 BYTE_CNT 7 - 0 ! Write micro/byte assembly
03244 ! 'byte counter' word.
03245
03246 END WORD_11
03247
03248
03249 ! Sense byte 40 (byte counter 15:8)
03250
03251 WORD_11 COMMON
03252 BYT2_CNT
03253 BYTE_CNT2 7 - 0 ! Byte count bits 15 to 8
03254 END WORD_11
03255
03256
03257 ! Sense byte 41 (Pad counter HI/Lo; location M8959)
03258
03259 WORD_11 COMMON
03260 PAD1_CNT
03261 PAD_CNT 7 - 0 ! Write Micro/Byte assembly
03262 ! 'pad character counter' word.
03263 END WORD_11
03264
03265 ! Sense byte 42 (pad counter 15:8)
03266
03267 WORD_11 COMMON
03268 PAD2_CNT
03269 PAD_CNT 7 - 0 ! Write Micro/Byte assembly
03270
03271 END WORD_11
03272
03273 ! Sense byte 43 (Error code counter HI/Lo; location M8959)
03274
03275 WORD_11 COMMON
03276 ERR1_CNT
03277 ERR_CODE 7-0 ! ECODE counter values when read
03278 ! at the completion of an operation:
03279 ! EC Error Indication
03280 ! -1 Read Skip Count > 4 in
03281 ! 10 CORE DUMP, > 3 in
03282 ! 10 COMPAT, or > 8 in
03283 ! HI Density
03284 ! -2 Read Skip Count > 1 in
03285 ! 11 Normal or 15
03286 ! Normal
03287 ! -3 Format COde > 6
03288 ! -4 WMC SELF-TEST
03289 ! Diagnostic error
03290 ! -5 Read overrun or write fault
03291 END WORD_11
03292
03293 ! Sense byte 44 (error code counter 15:8)
03294 WORD_11 COMMON
03295 ERR2_CNT
03296 ECODE_2 7 - 0 ! Error code counter 15:8
03297 END WORD_11
03298
03299
03300 ! Sense byte 45 (Diagnostic data reg A)
03301
03302 WORD_11 COMMON
03303 DDR_A
03304 MASSBUS_DATA 7 - 0 ! This reg. reads from and writes
03305 ! to a portion of the 18 bit wide MBD
03306 ! bus between the M8956 and M8959
03307 ! modules.
03308 END WORD_11
03309
03310 ! Sense byte 46 (diagnostic data reg B)
03311
03312 WORD_11 COMMON
03313 DDR_B
03314 MASSBUS_DATA_B 7 - 0 ! This reg. reads from and writes
03315 ! to a portion of the 18 bit wide
03316 ! MBD bus between the M8956 and
03317 ! M8959 modules.
03318 END WORD_11
03319
03320
03321 ! Sense byte 47 (Write Microcontroller error byte)
03322
03323 WORD_11 COMMON
03324 WMCERR
03325 MBD 2-0 ! HI order 3 bits of MBD lines
03326 DRRDPE 03 ! Read data parity error from M8952
03327 ! to WMC modules over the CRC bus.
03328 ROMPE 04 ! WMC ROM parity error was detected
03329 ! or the WMC internal microdiagnostics
03330 ! stopped at an error halt.
03331 ERR 05 ! WMC diagnostic ''ovarall error''
03332 ! status bit.
03333 DRMBPE 06 ! Massbus data bus parity error
03334 ! was received at TM78 data input
03335 ! port.
03336 DR_NO_WR_CLK 07 ! Host Massbus controller failed
03337 ! to respond to SCLK in time to
03338 ! transfer next data byte. (currently
03339 ! not used)
03340
03341 END WORD_11
03342
03343 ! Sense byte 48 (Interrupt status byte, M8960)
03344
03345 WORD_11 COMMON
03346 INTSTA
03347 X_ROMPE 00 ! Translator (M8958) ROM parity error
03348 ! or has branched to an error halt
03349 ! during its internal diagnostic
03350 ! routines.
03351 PE_WR_PE 01 ! Translator VPE on PE write has
03352 ! been detected at the output of
03353 ! the Translator.
03354 MB_B_OUT 02 ! Massbus port B logic not present
03355 MB_A_OUT 03 ! Massbus port A logic not present
03356 WR_DATA_REG_P 04 ! Reflects the state of the
03357 ! ''DR BYTE PAR H'' line. Serves
03358 ! as the parity bit for the WRTDAT
03359 ! reg. or PE write done flag.
03360 PWR_OK 05 ! When set indicates that the TM78
03361 ! Power Supply has not signaled
03362 ! an AC LO condition.
03363 ROM_PE 06 ! Microcomputer(M8960) ROM has
03364 ! experienced a Parity Error.
03365 MBSEL 07 ! Massbus port currently selected
03366 ! 0 = Port A, 1 = Port B
03367
03368 END WORD_11
03369
03370
03371 ! Sense byte 49 (TU78 status byte)
03372
03373 WORD_11 COMMON
03374 TUSTAT
03375 FPT_TU 00 ! File protected
03376 EOT_TU 01 ! End of tape
03377 BOT_TU 02 ! Beginning of tape
03378 PES 03 ! 1 = PE mode, 0 = GCR mode
03379 REW_TU 04 ! TU is rewinding
03380 ONL 05 ! TU is on-line, but not necessarily
03381 ! ready
03382 RDY_ON 06 ! Ready has undergone a transition
03383 ! to the set state. Cleared by a CLR
03384 ! TU command.
03385 REDY 07 ! The tape unit is ON LINE, not
03386 ! rewinding, not loading or unloading
03387 ! and all pneumatic interlocks are made.
03388
03389 END WORD_11
03390
03391 ! Sense byte 50 (MIA status A byte)
03392
03393 WORD_11 COMMON
03394 MIAA_STAT
03395 DSE_MIA 00 ! indicates that a Data security erase
03396 ! command has been written into the TU
03397 ! CMD B location. Clears when EOT sets
03398 ! or when a CLR TU command is written
03399 ! into TU CMD B.
03400 MOT 01 ! Indicates TU capstan motion
03401 LWR 02 ! Loop write-to-read test command
03402 WR_INH 03 ! Write head inhibit
03403 WRT 04 ! Indicates the state of the
03404 ! Write command bit
03405 REVERSE 05 ! indicates the state of the
03406 ! TU reverse command bit
03407 FWD 06 ! TU forward bit has been written
03408 ! with a 1 or a DSE command has
03409 ! been written into the TU CMD B
03410 ! location.
03411 MAN_TEST 07 ! MIA is in manual test mode
03412
03413 END WORD_11
03414
03415 ! Sense byte 51 (MIA status B byte)
03416
03417 WORD_11 COMMON
03418 MIAB_STAT
03419 PORTSEL_MIA 2-0 ! Port select
03420 ! 6 = position 0 (massbus A)
03421 ! 5 = position 1 (massbus B)
03422 ! 3 = position 2 or both(Massbus A or B)
03423 ! 7 = position 3(select neither Massbus)
03424 SPEED 4-3 ! A two bit field that indicates
03425 ! the speed of a tape unit. TU78 = 2
03426 ! (125 IPS)
03427 ! Bit 3 contains 0 always
03428 ! Bit 4 contains 1 always
03429 ARA_ERR 5 ! Automatic read amplification
03430 ! burst error. During a GCR operation
03431 ! from 9.5 inches after BOT the
03432 ! amplifier gains failed to achieve
03433 ! the required value. Valid only if
03434 ! READY is set.
03435 PEC 6 ! 0 = GCR mode
03436 ! 1 = PE mode
03437 CMD_PE 7 ! TU bus command parity error or
03438 ! a TEST command has been written
03439 ! into TU CMD B. Clears when a CLR
03440 ! TU command is received, whether
03441 ! parity is correct(odd) or not.
03442 ! This bit drives the TU Bus CMD PE L
03443 ! line.
03444 END WORD_11
03445
03446 ! Sense byte 52 (MIA register 3; serial NR A)
03447
03448 WORD_11 COMMON
03449 SERA_NR
03450 SER_ANR 7-0 ! SERIAL NUMBER
03451 END WORD_11
03452
03453
03454 ! Sense byte 53 (MIA register 4; serial NR B)
03455
03456 WORD_11 COMMON
03457 SERB_NR
03458 SER_BNR 7-0 ! SERIAL NUMBER
03459 END WORD_11
03460
03461
03462
03463 ! Sense byte 54 (MIA TU diagnostics byte, M8955)
03464
03465 WORD_11 COMMON
03466 TUDIAG
03467 AMTIE_THR 1-0 ! AMTIE threshold
03468 ! 0/1 = 10% IBG check
03469 ! 2 = 25% Write
03470 ! 3 = 20% Read
03471 ! Bit 02 is zero
03472 TACH 03 ! Tachometer pulse
03473 EOT_DET 04 ! EOT detected
03474 RD_EN 05 ! Read enable
03475 NOT_WR 06 ! Not writing
03476 WRB4 07 ! State of write AMP for TK4
03477
03478 END WORD_11
03479
03480 ! Sense byte 55
03481
03482 WORD_11 COMMON
03483 RET1_CNT
03484 RET_CNT 7 - 0 ! Retry counter. This byte is the
03485 ! count of retry interrupt requests
03486 ! given for the tape unit. When this
03487 ! count is zero, the tape unit is not
03488 ! in a retry sequence.
03489 END WORD_11
03490
03491 ! Sense byte 56 (Retry control byte)
03492 ! This byte is used by the microcode to control error recovery. It is
03493 ! meaningful only when the retry counter(byte 55) is not zero.
03494
03495 WORD_11 COMMON
03496 RET2_CNT
03497 REV_CMD 05 ! Initial command moved tape
03498 ! reverse
03499 ! Bits 0 to 4 are not used
03500 RD 06 ! Initial command was a Read
03501 OPP 07 ! Last retry was in the opposite
03502 ! direction of initial command
03503 END WORD_11
03504
03505 ! Sense byte 57 (TU software status)
03506
03507 WORD_11 COMMON
03508 TUX
03509 DSE_TUX 00 ! Data security erase in progres
03510 REW 01 ! Rewind in progress
03511 PRES_TUX 02 ! TU exists and power is on
03512 NDT 03 ! NON_DATA transfer command
03513 ! issued from a massbus port
03514 ! is in progress
03515 REV 04 ! Tape was not moved in reverse
03516 WRT_TAPE 05 ! Last tape operation involved
03517 ! a write to tape
03518 TM 06 ! Last record seen was a tape
03519 ! mark
03520 PORT 07 ! 0 = Last massbus command came
03521 ! from port A
03522 ! 1 = Last massbus command
03523 ! came from port B
03524 END WORD_11
03525
03526 ! Sense byte 58 (Transfer control byte)
03527
03528 WORD_11 COMMON
03529 XFRCTL
03530 WRC_SEL 2-0 ! Write clock select
03531 ! 0 = Normal write clock
03532 ! 1 = 20% clock
03533 ! 2 = 10% clock (GCR read)
03534 ! 3 = -20% clock (PE read)
03535 ! 4 = External clock
03536 ! 5 = Single step
03537 ! 6/7 = not used
03538 RDC_SEL 5-3 ! Read clock select
03539 ! 0 = -10% clock
03540 ! 1 = +10% clock
03541 ! 2 = Normal clock
03542 ! 3 = -30% clock
03543 ! 4 = external clock
03544 ! 5 = Single clock
03545 ! 6/7 = not used
03546 PLO_BP 06 ! Read channel Phase Lock
03547 ! Oscillator Bypass
03548 ! Bit 7 is zero
03549 LO_RD_TH 07 ! Low read threshold.
03550 END WORD_11
03551
03552
03553 ! Sense byte 59(XRETRY Byte)
03554 WORD_11 COMMON
03555 XRETRY
03556 X_RETRY 7 - 0 ! REtry suppress and format control.
03557 ! This byte contains the contents
03558 ! of the left half of the Massbus reg.
03559 ! which contains the retry suppress bit
03560 ! format and skip count.
03561 END WORD_11
03562
03563 ! Sense byte 60(Keypad enable flag byte)
03564
03565 WORD_11 COMMON
03566 ENAON
03567 KEYPAD_FLAG 7 - 0 ! This byte is not zero when the
03568 ! keypad is enabled.
03569 END WORD_11
03570
03571 !++
03572 ! Disk statistics block
03573 !--
03574
03575 TABLE TOPS10
03576 DSCSBP !Disk statistics block
03577 DSCBPT 0 0-35 !TABLE LENGTH
03578 !-# OF ITEMS,,0
03579 DEV_NAM 1 0-35 !DEVICE NAME IN SIXBIT
03580 DSCHID 2 0-35 !HOME BLOCK ID IN SIXBIT
03581 DSCHCT 3 0-35 !LH = # OF HARD DEV+SEEK+SRH ERRORS
03582 !RH = # OF HARD DATA ERRORS
03583 DSCSCT 4 0-35 !LH = # OF HARD+SOFT DEV+SEEK+SRH ERRORS
03584 !RH = # OF HARD+SOFT DATA ERRORS
03585 DSCPCT 5 0-35 !LH = # OF POSITION FAILURES
03586 !RH = # OF HARD+SOFT SEEK INC'S
03587 SEEK_INC_CNT 5 18-35 !
03588 NTHUNG_CNT 6 0-8 ! NTHUNG count {
03589 THUNG_CNT 6 9-17 ! THUNG count { UNIHNG
03590 PHUNG_CNT 6 18-26 ! PHUNG count {
03591 SHUNG_CNT 6 27-35 ! SHUNG count {
03592 DSCMCT 7 0-35 !SOFTWARE ERROR COUNT
03593 SAT_ERRORS 7 0-11 ! SAT error count {
03594 RIB_ERRORS 7 12-23 ! RIB error count { UNIMCT
03595 CHKSM_ERRORS 7 24-35 ! Checksum error count {
03596 DSCBRC 8 0-35 !TOTAL BLOCKS READ IN BUFFERED MODE
03597 DSCBWC 9 0-35 !TOTAL BLOCKS WRITTEN IN BUFFERED MODE
03598 DSCDRC 10 0-35 !TOTAL BLOCKS READ IN DUMP MODE
03599 DSCDWC 11 0-35 !TOTAL BLOCKS WRITTEN IN DUMP MODE
03600 DSCMRC 12 0-35 !TOTAL BLOCKS READ BY MONITOR
03601 DSCMWC 13 0-35 !TOTAL BLOCKS WRITTEN BY MONITOR
03602 DSCICT 14 0-35 !TOTAL BLOCKS READ FOR SWAPPER
03603 DSCOCT 15 0-35 !TOTAL BLOCKS WRITTEN BY SWAPPER
03604 DSCMSC 16 0-35 !TOTAL SEEKS BY MONITOR
03605 DSCUSC 17 0-35 !TOTAL SEEKS FOR JOBS
03606 END TABLE
03607
03608 !++
03609 ! DTE control block
03610 !--
03611
03612 TABLE TOPS10 TOPS20
03613 DTE_CONTROL_BLOCK !List of DTE control blocks
03614 DTE_BLOCK,_0 0 BODY-F
03615 DTE_BLOCK,_1 8 BODY-F
03616 DTE_BLOCK,_2 16 BODY-F
03617 DTE_BLOCK,_3 24 BODY-F
03618 END TABLE
03619
03620 TABLE TOPS10 TOPS20
03621 DTE_BLOCK ! Each DTE duplicates the following format
03622 TO_11_POINTER 0 0-35
03623 TO_10_POINTER 1 0-35
03624 DTE_INT_INSTRUCTION 2 0-35
03625 ! RESERVED 3 0-35
03626 EXAMINE_PROTECT 4 0-35
03627 DEPOSIT_PROTECT 5 0-35
03628 DEPOSIT_RELOC 6 0-35
03629 END TABLE
03630 !---------------------------------------------------------------
03631
03632 !++
03633 !
03634 ! MASSBUS REGISTER INFORMATION FOR DX20.
03635 ! MASSBUS REGISTER VALUES ARE IN THE FORM
03636 ! FINAL CONTENTS,,INITIAL CONTENTS
03637 !
03638 !--
03639
03640 TABLE TOPS10 TOPS20
03641 DX20_MASSBUS_REG
03642 DM_CR 0 0-35 ! Control register
03643 DM_SR 1 0-35 ! Status register
03644 DM_ER 2 0-35 ! Error register
03645 DM_MR 3 0-35 ! Maintainence register
03646 DM_AS 4 0-35 ! Attention summary register
03647 DM_SB 5 0-35 ! Secondary block address register
03648 DM_DT 6 0-35 ! Drive type & Hardware version #
03649 DM_SI 7 0-35 ! STATUS INDEX / ENDING STATUS
03650 DM_DN 8 0-35 ! DRIVE # / MODE
03651 DM_ES 9 0-35 ! EXTENDED STATUS TABLE SIZE
03652 DM_TE 10 0-35 ! Track in error / Flags
03653 DM_AY 11 0-35 ! ASYNCH. STATUS
03654 DM_E0 12 0-35 ! EXTENDED STATUS REG 0
03655 DM_E1 13 0-35 ! EXTENDED STATUS REG 1
03656 DM_IR 14 0-35 ! INSTR. REG
03657 DM_PC 15 0-35 ! PROGRAM COUNTER
03658 DM_AL 16 0-35 ! ALU
03659 DM_SD 17 0-35 ! SROM / DROM
03660 DM_FP 18 0-35 ! FROM / PARITY / INTERRUPTS
03661 DM_BW 19 0-35 ! BALU / WORKING MEMORY
03662 DM_IB 20 0-35 ! IBUS / BR
03663 DM_MA 21 0-35 ! FLAGS / MEMORY ADDR.
03664 END TABLE
03665
03666 !++
03667 !
03668 ! DX20 DEVICE SUB-BLOCK DEFINITIONS
03669 !
03670 !--
03671
03672 TABLE TOPS10 TOPS20
03673 DX20_DEVICE_REG
03674 DT_SBA 0 0-35 ! SENSE BYTES 0-3
03675 DT_SBB 1 0-35 ! 4-7
03676 DT_SBC 2 0-35 ! 8-11
03677 DT_SBD 3 0-35 ! 12-15
03678 DT_SBE 4 0-35 ! 16-19
03679 DT_SBF 5 0-35 ! 20-23
03680 DT_MCV 6 0-35 ! MICRO CODE VERSION #
03681 DT_MRA 7 0-35 ! MASSBUS INTERFACE REG 0-3
03682 DT_MRB 8 0-35 ! 4-7
03683 DT_MRC 9 0-35 ! 10-13
03684 DT_MRD 10 0-35 ! 14-17
03685 DT_MRE 11 0-35 ! 20-23
03686 DT_MRF 12 0-35 ! 24-27
03687 DT_CB0 13 0-35 ! CHANNEL BUS INTERFACE 10-13
03688 DT_CB1 14 0-35 ! 14-17
03689 DT_DP0 15 0-35 ! DATA PATH REG 0-3
03690 DT_DP1 16 0-35 ! 4-7
03691 DT_DP2 17 0-35 ! 10-13
03692 DT_DP3 18 0-35 ! 14-17
03693 DT_LAS 19 0-35 ! LAST COMMAND,LAST ADDR,
03694 ! LAST ASYNCH,STATUS,
03695 ! LAST DEV W ASYNCH STATUS
03696 END TABLE
03697
03698 !++
03699 ! Information recorded by TOPS-10 or TOPS-20 when an
03700 ! operator wishes to note something in the log.
03701 ! This may or may not be a manually-detected error.
03702 !--
03703
03704 TABLE TOPS10 TOPS20
03705 ERROR_LOG
03706 JOB_NUMBER 0 0-17 !Who sent message
03707 TERMINAL_NUMBER 0 18-35 !Terminal of sender
03708 USER_ID 1 0-35 !P,PN OF USER
03709 WHO_ANSWER 2 0-35 !SIXBIT ANSWER TO /WHO
03710 DEV_ANSWER 3 0-35 !SIXBIT ANSWER TO /DEV
03711 LOG_TEXT 4 0-35 !PTR TO ASCIZ MSG
03712 END TABLE
03713
03714 !++
03715 ! Front-end entry description used by both TOPS-10 and TOPS-20.
03716 !--
03717
03718 TABLE TOPS10 TOPS20
03719 FE_DATA
03720 FORK_NUMBER 0 0-17 !Fork running at time of entry
03721 JOB_NUMBER 0 18-35 !Job " " " " "
03722 DIRECTORY 1 0-35 !LOGGED IN DIRECTORY,, CONNECTED DIR
03723 FE_VERSION 2 0-35 !FRONT END SOFTWARE VERSION #
03724 PROGRAM_NAME 3 0-35 !USER'S PGM NAME IN SIXBIT
03725 UNK_DEV_FLAG 4 0 !DEVICE CODE UNKNOWN TO TOPSxx
03726 DEV_NUMBER 4 14-17 !DEVICE #
03727 DEV_CODE 4 18-35 !DEVICE CODE OF REPORTED DEVICE
03728 ! SAME AS CODE IN FE PROTOCOL
03729 WD_CNT 5 0-17 !POINTER TO SUB-BLOCK
03730 FE_SUB 5 MAIN-F !To get into subtable
03731 FE_OFFSET 5 18-35 !DEVICE DEPENDENT PACKET OF INFORMATION.
03732 !-# OF WORDS,,OFFSET FROM FE_JOB
03733 DETECTING_DTE 6 0-35 !DTE # WHICH DETECTED ERROR
03734 FE_LENGTH 7 0-35 !LENGTH OF DATA PACKET IN 8 BIT BYTES
03735 END TABLE
03736
03737 !++
03738 ! FE supplied data in 16 bit bytes
03739 !--
03740 TABLE TOPS10 TOPS20
03741 FE_SUB !Fixed portion of front-end supplied data
03742 STD_STATUS 0 0-15 !Standard status
03743 CONFIG_RPT_FLAG 0 4 !DEVICE CONFIGURATION REPORT
03744
03745 ! Info for new KLERR entry (sub-type 205)
03746
03747 KLER_BLOCK 0 16-31 !Current block number
03748 KLER_BLOCK_CNT 1 0-15 !Total number of blocks in entry
03749 KLER_FIRST_WORD 1 16-31 !First data word
03750 END TABLE
03751
03752 !++
03753 ! HALT STATUS BLOCK
03754 !--
03755 TABLE TOPS10 TOPS20
03756 KS_HS_BLOCK !KS-10 HALT status block
03757 HS_MAG 0 0-35 !MAGNITUDE (ONES IN BITS 1-36)
03758 HS_PC 1 0-35 !PC
03759 HS_HR 2 0-35 !CURRENT INSTRUCTION (HR)
03760 HS_AR 3 0-35 !AR
03761 HS_ARX 4 0-35 !ARX
03762 HS_BR 5 0-35 !BASE REGISTER
03763 HS_BRX 6 0-35 !BASE REGISTER EXTENSTION
03764 HS_ONE 7 0-35 !CONSTANT ONE
03765 HS_EBR 10 0-35 !EXEC BASE REGISTER
03766 HS_UBR 11 0-35 !USER BASE REGISTER
03767 HS_MSK 12 0-35 !MASK (ONES IN BITS 0-35)
03768 HS_FLG 13 0-35 !MICROCODE STATUS FLAGS,,PAGE FAIL CODE
03769 HS_PI 14 0-35 !PI STATUS
03770 HS_X1 15 0-35 !1,,1
03771 HS_T0 16 0-35 !T0
03772 HS_T1 17 0-35 !T1
03773 HS_VMA 20 0-35 !VMA FLAGS,,VMA (0-15,,16-35)
03774 END TABLE
03775
03776 !++
03777 !
03778 ! MASSBUS REGISTER DEFINITIONS
03779 !
03780 !--
03781
03782 TABLE TOPS10 TOPS20
03783 MB_DEV ! MB_DEVICE_REG
03784 MB_CR_END 0 0-17 ! Control reg at end
03785 MB_CR_ERR 0 18-35 ! at error
03786 MB_DS_END 1 0-17 ! Status reg at end
03787 MB_DS_ERR 1 18-35 ! at error
03788 MB_ER1_END 2 0-17 ! Error reg 1 at end
03789 MB_ER1_ERR 2 18-35 ! at error
03790 MB_ERR_END 2 0-17 ! Error reg 1 at end
03791 MB_ERR_ERR 2 18-35 ! at error
03792 MB_MR_END 3 0-17 ! Maintenance reg at end
03793 MB_MR_ERR 3 18-35 ! at error
03794 MB_AS_END 4 0-17 ! Attention summary reg at end
03795 MB_AS_ERR 4 18-35 ! at error
03796 MB_DA_END 5 0-17 ! Desired track/sector addr reg at end
03797 MB_DA_ERR 5 18-35 ! at error
03798 MB_FR_CNT_END 5 0-17 ! Frame count reg at end
03799 MB_FR_CNT_ERR 5 18-35 ! at error
03800 MB_DT_END 6 0-17 ! Drive type reg at end
03801 MB_DT_ERR 6 18-35 ! at error
03802 MB_LA_END 7 0-17 ! Look ahead reg at end
03803 MB_LA_ERR 7 18-35 ! at error
03804 MB_CHK_SUM_END 7 0-17 ! Checksum reg at end
03805 MB_CHK_SUM_ERR 7 18-35 ! at error
03806 MB_SN_END 8 0-17 ! Serial number reg at end (BCD)
03807 MB_SN_ERR 8 18-35 ! at error (4 digits)
03808 MB_OF_END 9 0-17 ! Offset reg at end
03809 MB_OF_ERR 9 18-35 ! at error
03810 MB_TC_END 9 0-17 ! Tape control reg at end
03811 MB_TC_ERR 9 18-35 ! at error
03812 MB_DC_END 10 0-17 ! Desired cylinder reg at end
03813 MB_DC_ERR 10 18-35 ! at error
03814 MB_CC_END 11 0-17 ! Current cylinder reg at end
03815 MB_CC_ERR 11 18-35 ! at error
03816 MB_ER2_END 12 0-17 ! Error reg 2 at end
03817 MB_ER2_ERR 12 18-35 ! at error
03818 MB_ER3_END 13 0-17 ! Error reg 3 at end
03819 MB_ER3_ERR 13 18-35 ! at error
03820 MB_ECC1_END 14 0-17 ! ECC position reg at end
03821 MB_ECC1_ERR 14 18-35 ! at error
03822 MB_ECC2_END 15 0-17 ! ECC pattern reg at end
03823 MB_ECC2_ERR 15 18-35 ! at error
03824 END TABLE
03825
03826 !++
03827 ! NXM_TABLE handled by user. May be one bit per page or one bit per word.
03828 !--
03829
03830 TABLE TOPS10
03831 NXM_TAB
03832 NXM_WORD 0 0-35 !Just define the first word of the
03833 !table for now. The length depends on
03834 !the pointer to this table.
03835 END TABLE
03836
03837 !++
03838 !
03839 ! %CCPAR and %CCMPT sub-table definitions.
03840 !
03841 !--
03842
03843 TABLE TOPS10
03844 PAR_SWEEP_DATA ! Info recorded by memory sweep routines
03845 HIGH_ADDRESS 0 0-35 !Highest parity error found last sweep
03846 LAST_REL_ADDRESS 1 0-35 !Relative address in segment.
03847 LAST_SWEEP_COUNT 2 0-35 !Count of errors during last sweep.
03848 TOTAL_SWEEPS 3 0-35 !Number of parity sweeps this load.
03849 USER_ENABLED_COUNT 4 0-35 !Done by diagnostics?
03850 ADDRESS_AND 5 0-35 !On last sweep.
03851 CONTENTS_AND 6 0-35 !On last sweep.
03852 ADDRESS_OR 7 0-35
03853 CONTENTS_OR 8 0-35
03854 CHANNEL_ERRORS 9 0-35 !Count of errors detected by channel
03855 !but not by sweep.
03856 END TABLE
03857
03858 !++
03859 !
03860 ! Contents of ACS
03861 !
03862 !--
03863
03864 TABLE TOPS10 TOPS20
03865 SAVED_ACS
03866 AC0 0 0-35
03867 AC1 1 0-35 !
03868 AC2 2 0-35 !
03869 AC3 3 0-35 !
03870 AC4 4 0-35 !
03871 AC5 5 0-35 !
03872 AC6 6 0-35 !
03873 AC7 7 0-35 !
03874 AC10 8 0-35 !
03875 AC11 9 0-35 !
03876 AC12 10 0-35 !
03877 AC13 11 0-35 !
03878 AC14 12 0-35 !
03879 AC15 13 0-35 !
03880 AC16 14 0-35 !
03881 AC17 15 0-35 !
03882 END TABLE
03883
03884 !++
03885 !
03886 ! SBDIAG tables.
03887 !
03888 !--
03889
03890 TABLE TOPS10 TOPS20
03891 SBDIAG_LIST
03892 NEG_FUNCTION_COUNT 0 0-17 !Count of S-bus diagnostic functions.
03893 CONTROLLER_NUMBER 0 18-35 !Memory controller identifier.
03894 SBDIAG_FUNCTION_0 1 0-35 !Only function 0 and 1 currently
03895 SBDIAG_FUNCTION_1 2 0-35 !
03896 ! SBDIAG_FUNCTION_2 3 0-35
03897 ! SBDIAG_FUNCTION_3 4 0-35
03898 ! SBDIAG_FUNCTION_4 5 0-35
03899 ! SBDIAG_FUNCTION_5 6 0-35
03900 ! SBDIAG_FUNCTION_6 7 0-35
03901 ! SBDIAG_FUNCTION_7 8 0-35
03902 ! SBDIAG_FUNCTION_10 9 0-35
03903 ! SBDIAG_FUNCTION_11 10 0-35
03904 ! SBDIAG_FUNCTION_12 11 0-35
03905 END TABLE
03906
03907 !++
03908 ! The following table defines each word of a ten-word block which may
03909 ! be a list of bad address, good contents, bad contents, or any other
03910 ! list of items saved within an entry.
03911 !--
03912
03913 TABLE TOPS10 TOPS20
03914 TOP_TEN
03915 WORD1 0 0-35 !List of saved addresses or data
03916 WORD2 1 0-35 !
03917 WORD3 2 0-35 !
03918 WORD4 3 0-35 !
03919 WORD5 4 0-35 !
03920 WORD6 5 0-35 !
03921 WORD7 6 0-35 !
03922 WORD8 7 0-35 !
03923 WORD9 8 0-35 !
03924 WORD10 9 0-35 !
03925 END TABLE
03926
03927 !++
03928 ! The following WORD definitions are for all entries
03929 ! in TOPS-10 and TOPS-20.
03930 !--
03931 WORD_10
03932 API_WORD
03933 ADDRESS_SPACE 0-2
03934 ! DEFINE
03935 ! EPT = 0
03936 ! EX_VIRTUAL = 1
03937 ! PHYSICAL = 4
03938 ! END DEFINE
03939 API_FUNCTION 3-5
03940 ! DEFINE
03941 ! STANDARD_INT = 0,1
03942 ! DTE_STD_INT = 7
03943 ! VECTOR_INT = 2
03944 ! INC_DEC_INT = 3
03945 ! EXAMINE_INT = 4
03946 ! DEPOSIT_INT = 5
03947 ! BYTE_INT = 6
03948 ! END DEFINE
03949 QUAL_BIT 6
03950 DEVICE_NUMBER 7-10
03951 ! DEFINE
03952 ! RH20_INT = 0-7
03953 ! DTE_INT = 10-13
03954 ! DIA_INT = 17
03955 ! END DEFINE
03956 API_PHYS_ADDRESS 13-35
03957 END WORD_10
03958
03959 WORD_10 TOPS10 TOPS20
03960 APR_STATUS
03961 ENABLE_24_31 6-13
03962 SWEEP_BUSY 19
03963 MASTER_OSC 22
03964 S_BUS_ERROR 24
03965 APRSTS_NXM 25
03966 IO_PAGE_FAIL 26
03967 MB_PAR 27
03968 CACHE_DIR_PAR 28
03969 ADDRESS_PAR 29
03970 PWR_FAIL 30
03971 SWEEP_DONE 31
03972 INT_REQ 32
03973 PI_LEVEL 33-35
03974 END WORD_10
03975
03976 WORD_10 TOPS10 TOPS20
03977 PAGE_DATAI
03978 MUST_BE_ONES 0-2
03979 CURRENT_BLOCK 6-8
03980 PREV_BLOCK 9-11
03981 PREV_CONTEXT 13-17
03982 UPT_PAGE 23-35
03983 END WORD_10
03984
03985 WORD_10 TOPS10 TOPS20
03986 PAGE_FAIL_WORD
03987 MODE 0
03988 ! DEFINE
03989 ! USER_MODE = 1
03990 ! EXEC_MODE = 0
03991 ! END DEFINE
03992 ACCESSIBLE 2
03993 WRITEABLE 3
03994 SOFTWARE 4
03995 WRITE_REF 5
03996 PUBLIC_MODE 6
03997 CACHEABLE 7
03998 VIRTUAL 8
03999 PF_CODE 1-5
04000 ! DEFINE
04001 ! PROP_VIOLATE = 21
04002 ! ADDRESS_FAIL = 23
04003 ! ILLEGAL_INDIR = 24
04004 ! PAGE_TABLE_PAR = 25
04005 ! ILL_ADDRESS = 27
04006 ! AR_PAR = 36
04007 ! ARX_PAR = 37
04008 ! END DEFINE
04009 VIRTUAL_ADDRESS 18-35
04010 END WORD_10
04011
04012 WORD_10 TOPS10 TOPS20
04013 PAGE_STATUS
04014 CACHE_LOOK 18
04015 CAHE_LOAD 19
04016 KL10_PAGED 21
04017 TRAP_ENABLE 22
04018 EPT_PAGE 23-35
04019 END WORD_10
04020
04021 WORD_10 TOPS10 TOPS20
04022 PI_STATUS
04023 PI_REQUESTS 11-17 !PI levels requesting interrupts (1-7).
04024 WRITE_EVEN_ADR_PAR 18
04025 WRITE_EVEN_DATA_PAR 19
04026 WRITE_EVEN_DIR_PAR 20
04027 PI_IN_PROGRESS 21-27 !PI levels currently waiting to finish.
04028 PI_SYS_ON 28
04029 PI_CHANNELS_ON 29-35 !PI levels capable of interrupting.
04030 END WORD_10
04031
04032 WORD_10 TOPS10 TOPS20
04033 RDERA_STATUS
04034 WORD_NUMBER 0-1 !Failing word within quadword.
04035 SWEEP_REF 2 !Referenced during cache sweep.
04036 CHANNEL_REF 3 !Channel
04037 REF_DATA 4-6
04038 ! DEFINE
04039 ! MEM_RD_OR_RPW = 0
04040 ! CHN_STORE_STATUS = 1
04041 ! CHN_STORE_DATA = 3
04042 ! E_BOX_STORE_FM_AR = 5
04043 ! RD_FM_CACHE = 6
04044 ! CACHE_WRITE_BACK = 7
04045 ! END DEFINE
04046 RDERA_PHYS_ADDRESS 14-35
04047 END WORD_10
04048
04049 ! SBDIAG bit definitions
04050 !--------------------------------------------------------
04051 WORD_10 TOPS10 TOPS20
04052 SBDIAG_FUNCTION_0 ! SBDIAG function 0 bits
04053 SBD0_DMA REFER !DMA-specific stuff
04054 SBD0_NOT_DMA REFER !Bits not found in DMA
04055 SBD0_MF20 REFER !MF20-specific bits
04056 END WORD_10
04057
04058 WORD_10 TOPS10 TOPS20
04059 SBD0_DMA !DMA-specific SBDIAG function 0 bits
04060 SBD0_NXM 2
04061 SBD0_READ_PAR_ERR 3 !Also on MF20.
04062 SBD0_WRITE_PAR_ERR 4 !Also on MF20.
04063 SBD0_ADD_PAR_ERROR 5 !Also on MA/MB and MF20.
04064 SBD0_BUS_MODE 6-7
04065 SBD0_LAST_REQ_BITS 8-11 !RQ0-RQ3 also on MF20.
04066 SBD0_LAST_REQ_READ 12 !Also on MF20.
04067 SBD0_LAST_REQ_WRITE 13 !ALSO on MF20.
04068 SBD0_FIRST_ADDRESS 14-35 !XBUS address on MF20.
04069 END WORD_10
04070
04071 WORD_10
04072 SBD0_NOT_DMA !MA/MB/MF SBDIAG function 0 bits
04073 SBD0_INCOMP_CYCLE 2 !
04074 SBD0_INTERL_MODE 6-7 !
04075 END WORD_10
04076
04077 WORD_10
04078 SBD0_MF20 !MF20 specific bits in SBDIAG function 0
04079 SBD0_CONTR_ERR 0
04080 SBD0_CORR_ERROR 1
04081 END WORD_10
04082
04083 WORD_10 TOPS10 TOPS20
04084 SBDIAG_FUNCTION_1 ! SBDIAG function 1 bit descriptions
04085 SBD1_CONTR_TYPE 8-11 !Common
04086 SBD1_MA_MB REFER !DMA-specific bits
04087 SBD1_NOT_MF REFER !DMA/MA/MB but not MF20
04088 SBD1_MF20 REFER !MF20-specific bits
04089 END WORD_10
04090
04091 WORD_10 TOPS10 TOPS20
04092 SBD1_MA_MB !MA/MB specific SBDIAG function 1 bits
04093 SBD1_SBUS_ADDRESS 14-17
04094 SBD1_LOW_ADR_BOUND 18-21
04095 SBD1_HI_ADR_BOUND 22-25
04096 SBD1_MARGINS_ON 30
04097 SBD1_REQ_ENABLED 32-35 ! RQ0-RQ3
04098 END WORD_10
04099
04100 WORD_10
04101 SBD1_NOT_MF ! DMA/MA/MB but not MF20 SBDIAG function 1 bits
04102 SBD1_MODS_INSTALLED 0-7 !DMA = 0-7, MA/MB = 4-7
04103 SBD1_LOOPBACK_SET 12 !also DMA
04104 END WORD_10
04105
04106 WORD_10
04107 SBD1_MF20 !MF20 specific SBDIAG function 1 bits
04108 SBD1_LOOP_GROUP_SEL 12-14
04109 SBD1_MF20_DISABLED 25
04110 SBD1_MF20_CONDITION 26-27
04111 END WORD_10
04112
04113 !++
04114 !
04115 ! The following functions do not currently exist in the event
04116 ! file. They are documented here in case they are inserted later.
04117 !
04118 !--
04119 !
04120 !WORD_10
04121 ! SBDIAG_FUNCTION_2
04122 ! ERROR_WORD_NUMBER 5-6
04123 ! SELECTED_DATA 7-14 !Diagnostic or PROM.
04124 ! SS_MOS_ADDRESS 20-27
04125 ! RAM_ERROR_TYPE 28-30 !Timing, substitution, response.
04126 !END WORD_10
04127 !
04128 !WORD_10
04129 ! SBDIAG_FUNCTION_3
04130 ! FAST_BUS_ON 8
04131 ! FIXED_VALUE_RAMS 10-13
04132 !END WORD_10
04133 !
04134 !WORD_10
04135 ! SBDIAG_FUNCTION_4
04136 ! SS_CLK_CNTRL_ECHO 9-15
04137 ! REF_ENABLED 21
04138 ! REF_INTRVL_COUNTER 23-30
04139 !END WORD_10
04140 !
04141 !WORD_10
04142 ! SBDIAG_FUNCTION_5
04143 ! SS_MOS_RAS 24-27 !Row address strobe.
04144 !END WORD_10
04145 !
04146 !WORD_10
04147 ! SBDIAG_FUNCTION_6
04148 ! DIAG_DATA_FROM 7-14
04149 ! SS_MOS_CAS 24-27 !State of column address strobe.
04150 !END WORD_10
04151 !
04152 !WORD_10
04153 ! SBDIAG_FUNCTION_7
04154 ! BIT_SUB_RAM_DAT_ECHO 7-14
04155 ! SS_MOS_WRITE_ENABLE 24-27
04156 !END WORD_10
04157 !
04158 !WORD_10
04159 ! SBDIAG_FUNCTION_10
04160 ! ACTIVE_MARGINS 7-10
04161 ! ACTIVE_MARGIN_EN 11-14
04162 ! ECC_INHIBITED 25
04163 ! DC_ERROR 26
04164 !END WORD_10
04165 !
04166 !WORD_10
04167 ! SBDIAG_FUNCTION_11
04168 ! TIM_RAM_DATA_ECHO 21-27
04169 ! 4K_ENABLED 29
04170 ! DESEL_CYC_ENABLED 30
04171 !END WORD_10
04172 !
04173 !WORD_10
04174 ! SBDIAG_FUNCTION_12
04175 ! ADD_RES_RAM_ECHO 8-14
04176 !END WORD_10
04177 !---------------------------------------------------------------
04178 ! End of SBDIAG definitions
04179
04180 !++
04181 !
04182 ! RH10 Registers - Bit Definitions
04183 !
04184 !++
04185
04186 WORD_10 TOPS10 TOPS20
04187 CONI_RH10
04188 RH10_AR_FULL 0 ! SEE KL10 MAINTENANCE HANDBOOK
04189 RH10_CB_FULL 1
04190 RH10_CC_INH 3
04191 RH10_CHAN_ACT 4
04192 RH10_CHAN_PLS 5
04193 RH10_DF22 6
04194 RH10_ILL_FUNCT 9
04195 RH10_SELDR_ADR_E 10
04196 RH10_CDATA_PE 15
04197 RH10_CW_PE 16
04198 RH10_NXM 17
04199 RH10_DBUS_PE 18
04200 RH10_DREXC_ERROR 19
04201 RH10_CHAN_ERROR 20
04202 RH10_CW_WRITE 21
04203 RH10_OVER_RUN 22
04204 RH10_DR_RE_ERROR 23
04205 RH10_ILL_CMD 24
04206 RH10_POWER_FAIL 25
04207 RH10_CBUS_OVRUN 28
04208 RH10_RAE 29
04209 RH10_ATTN 30
04210 RH10_BUSY 31
04211 RH10_DONE 32
04212 END WORD_10
04213 !++
04214 !
04215 ! RH20 Registers - Bit Definitions
04216 !
04217 !++
04218
04219 WORD_10 TOPS10 TOPS20
04220 CONI_STATUS
04221 PIA 33-35 !PI channel assignment
04222 CMD_DONE 32 !command done
04223 PRI_CFL 31 !PTCR register loaded
04224 MBUS_AIE 30 !enable attention interrupts
04225 SEC_CFL 29 !STCR register loaded
04226 MBUS_ATTN 28 !massbus attention active
04227 MBUS_ENAB 27 !enable massbus transactions
04228 OVER_RUN 26 !data overrun error
04229 CHAN_RDY 25 !channel ready for data xfer
04230 REG_A_ERROR 24 !RAE register access error
04231 DR_RE_ERROR 23 !drive response error
04232 CHAN_ERROR 22 !channel error fm MBOX
04233 SHORT_WCE 21 !short word count error
04234 LONG_WCE 20 !long word count error
04235 DRIVE_EXC 19 !drive exception
04236 DATA_PE 18 !data bus parity error
04237 END WORD_10
04238
04239 WORD_10 TOPS20
04240 SBAR !secondary block addr reg
04241 PREP_REG REFER !common to all registers
04242 BLOCK_ADDRESS 20-35 !disk block address
04243 END WORD_10
04244
04245 WORD_10 TOPS20
04246 STCR !secondary transfer control reg
04247 PREP_REG REFER !common to all registers
04248 RESET_CLP 7 !reset command list pointer
04249 STORE_STAT 10 !store termination status
04250 DIS_XFER 19 !disable transfer error stop
04251 NEG_BLK_CNT 20-29 !negative block count
04252 FUNCTION_CODE 30-35 !function code for command
04253 END WORD_10
04254
04255 WORD_10 TOPS20
04256 PBAR !primary block addr reg
04257 PREP_REG REFER !common to all registers
04258 BLOCK_ADDRESS 20-35 !disk block address
04259 END WORD_10
04260
04261 WORD_10 TOPS20
04262 PTCR !primary transfer control reg
04263 PREP_REG REFER !common to all registers
04264 RESET_CLP 7 !reset command list pointer
04265 STORE_STAT 10 !store termination status
04266 DIS_XFER 19 !disable transfer error stop
04267 NEG_BLK_CNT 20-29 !negative block count
04268 FUNCTION_CODE 30-35 !function code for command
04269 END WORD_10
04270
04271 WORD_10 TOPS20
04272 IVIR !interrupt vector index reg
04273 PREP_REG REFER !common to all registers
04274 VECT_INTR_ADDR 27-35 !vector interrupt address
04275 END WORD_10
04276
04277 WORD_10 TOPS20
04278 RR !read register
04279 PREP_REG REFER !common to all registers
04280 PAR_BIT 17 !parity bit
04281 DIAG_WRITE_DATA 18-35 !write data during maint mode
04282 END WORD_10
04283
04284 WORD_10 TOPS20
04285 WR !write register
04286 PREP_REG REFER !common to all registers
04287 PAR_BIT 17 !parity bit
04288 DIAG_READ_DATA 18-35 !read data during maint mode
04289 END WORD_10
04290
04291 WORD_10 TOPS20
04292 DCR !diagnostic control register
04293 PREP_REG REFER !common to all registers
04294 XFER_SIG 26 !simulates massbus TRANSFER sig
04295 DATA_LOOP 27 !data loopback from massbus
04296 TEST_SBAR 28 !test SBAR register
04297 EVEN_PAR_CHK 29 !even parity check test
04298 READ_WRITE 30 !R/W set for diag read
04299 SIM_D_EXC 31 !simulate massbus exception
04300 SIM_EOB 32 !simulate massbus end of block
04301 SIM_ATTN 34 !simulate massbus attention
04302 SIM_SCLK 35 !simulate massbus S clock
04303 END WORD_10
04304
04305 WORD_10 TOPS20
04306 PREP_REG
04307 REG_SEL_CODE 0-5 !register select code
04308 LOAD_REG 6 !load register bit
04309 DIS_RAE 9 !disable register access error stop
04310 DEV_SEL_CODE 15-17 !device select code
04311 CBUS_EP 8 !control bus parity
04312 END WORD_10
04313
04314 WORD_10 TOPS20
04315 CONO !conditions out information
04316 CLEAR_RAE 24 !clear reg access error
04317 CLEAR_MBC 25 !clear massbus controller
04318 CLEAR_XFER 26 !clear transfer
04319 MBUS_ENAB 27 !enable the massbus
04320 CONO_RESET_CLP 28 !reset the cmd list pointer
04321 DEL_SCR 29 !delete current cmd in STCR
04322 ATTEN_ENABLE 30 !enable attention interrupt
04323 STOP 31 !stop the channel
04324 CLEAR_DONE 32 !clear out done flag
04325 PIA 33-35 !PI channel assignment
04326 END WORD_10
04327
04328 !++
04329 ! Bits defined in PDP-11 format
04330 !--
04331
04332 !++
04333 !
04334 ! RH11 - Register Definitions
04335 !
04336 !++
04337
04338 WORD_10 TOPS10 TOPS20
04339 UBA_STATUS
04340 UBA_STAT_TIME_OUT 18 !UNIBUS arbitrator time out or NXM
04341 UBA_STAT_BAD_MDATA 19 !Bad memory data
04342 UBA_STAT_BUS_PE 20 !KS10 (backplane) bus parity error
04343 UBA_STAT_NXD 21 !Nonexistant device
04344 UBA_STAT_HI_INT 24 !High level interrupt pending
04345 UBA_STAT_LO_INT 25 !Low " " "
04346 UBA_STAT_ACDC_LO 26 !AC or DC low
04347 UBA_STAT_DIS_XFR 28 !Disable transfer if BMD (bit 19=1)
04348 UBA_STAT_INIT_UBA 29 !Init UBA and unibus devices
04349 UBA_STAT_HIGH_PI 30-32 !High level PI number
04350 UBA_STAT_LOW_PI 33-35 !low level PI number
04351 END WORD_10
04352
04353 WORD_11 TOPS10 TOPS20
04354 RH11_RMCS2 !control and status reg 2
04355 DATA_LATE 15 !data late error
04356 WR_CK_ERROR 14 !write check error
04357 UBUS_PE 13 !unibus parity error
04358 NON_X_DRIVE 12 !non existent drive
04359 NXM 11 !non existent memory error
04360 PROG_ERROR 10 !program error
04361 MISS_XFER 9 !missed transfer error
04362 MBUS_DPE 8 !massbus data parity error
04363 OUT_READY 7 !output ready
04364 IN_READY 6 !input ready
04365 CONT_CLEAR 5 !controller clear
04366 PAR_TEST 4 !parity logic test
04367 BAI_INH 3 !inhibit increment of BA reg
04368 UNIT_SEL 2-0 !unit select
04369 END WORD_11
04370
04371 WORD_11 TOPS10 TOPS20
04372 RH11_RMBA !bus addres register
04373 BUS_ADDRESS 15-0 !unibus address
04374 END WORD_11
04375
04376 WORD_11 TOPS10 TOPS20
04377 RH11_RMDB !data buffer reg
04378 DATA 15-0 !data from bus
04379 END WORD_11
04380
04381 WORD_11 TOPS10 TOPS20
04382 RH11_RMWC !word count reg
04383 WORD_COUNT 15-0 !negative word count
04384 END WORD_11
04385
04386 !++
04387 ! RS04 Error Register Bit Definitions (from error register 1 offset)
04388 !__
04389
04390 WORD_11 COMMON
04391 RSER
04392 RS04_DCK 15 ! Data2Check
04393 RS04_UNS 14 ! Unsafe
04394 RS04_OPI 13 ! Operation incomplete
04395 RS04_DTE 12 ! Drive Timing Error
04396 RS04_WLE 11 ! Write lock error
04397 RS04_IAE 10 ! Invalid Address Error
04398 RS04_AO 9 ! Address overflow
04399 RS04_PAR 3 ! Bus Parity Error
04400 RS04_RMR 2 ! Register Modify Refused
04401 RS04_ILR 1 ! Illegal Register
04402 RS04_ILF 0 ! Illegal Function
04403 END WORD_11
04404
04405 !+++
04406 !
04407 ! RP04 / RP06 Register Bit Definitions
04408 !
04409 !+++
04410
04411 WORD_11 COMMON
04412 DS !drive status register
04413 ATTN_ACT 15 !attention active
04414 ERROR 14 !drive error
04415 PIP 13 !positioning in progress
04416 MOL 12 !medium on line
04417 WRITE_LOCK 11 !write lock switch on
04418 LAST_SECT 10 !last sector
04419 PROG_ABLE 9 !programmable
04420 DRIVE_PRES 8 !drive preset
04421 DRIVE_READY 7 !drive ready
04422 VALID_VOL 6 !valid volume
04423 RP4_DEQ1 5 !diff equal 1
04424 RP4_DLT64 4 !diff less than 64
04425 RP4_GOREV 3 !go reverse
04426 RP4_DIGB 2 !drive to inner guard band
04427 RP4_DF20 1 !drive fwd 20 ips
04428 RP4_DF5 0 !drive fwd 5 ips
04429 END WORD_11
04430
04431 WORD_11 COMMON
04432 ER1 !error reg 1
04433 DATA_CHECK 15 !data check during read data
04434 UNSAFE 14 !drive unsafe condition
04435 OPER_INC 13 !operation incomplete
04436 DR_T_ERROR 12 !drive timing error
04437 WR_LK_ERROR 11 !write lock error
04438 I_ADR_ERROR 10 !invalid address error
04439 A_OV_ERROR 9 !address overflow error
04440 HCRC_ERROR 8 !header CRC error
04441 H_COM_ERROR 7 !header compare error
04442 ECC_ERROR 6 !hard ECC error
04443 WR_CK_FAIL 5 !write clock failure
04444 FMT_ERROR 4 !format error
04445 PAR_ERROR 3 !parity error in drive
04446 RMR 2 !reg modification refused
04447 ILL_REG 1 !illegal reg reference
04448 ILL_FUNCT 0 !illegal function attempted
04449 END WORD_11
04450
04451 WORD_11 COMMON
04452 MR !maintenance register
04453 HI_CT_DET 10 !high count detected
04454 SBYTE_DET 9 !sync byte detected
04455 ZERO_DET 8 !zeros detected
04456 DATA_ENV 7 !data envelope detected
04457 ECC_ENV 6 !ECC envelope detected
04458 MAINT_WRITE 5 !maintenance write operation
04459 MAINT_READ 4 !maintenance read operation
04460 MAINT_SCLK 3 !maintenance S clock
04461 MAINT_INDEX 2 !maintenance index clock
04462 MAINT_CLOCK 1 !maintenance clock
04463 DIAG_MODE 0 !diagnostic mode
04464 END WORD_11
04465
04466 WORD_11 COMMON
04467 AS !attention summary reg
04468 ATA7 7 !attention active from unit 7
04469 ATA6 6 !attention active from unit 6
04470 ATA5 5 !attention active from unit 5
04471 ATA4 4 !attention active from unit 4
04472 ATA3 3 !attention active from unit 3
04473 ATA2 2 !attention active from unit 2
04474 ATA1 1 !attention active from unit 1
04475 ATA0 0 !attention active from unit 0
04476 END WORD_11
04477
04478 WORD_11 COMMON
04479 DA !drive address reg
04480 TRACK 12-8 !track number
04481 SECTOR 4-0 !sector address
04482 END WORD_11
04483
04484 WORD_11 COMMON
04485 DT !drive type register
04486 NO_BLK_ADR 15 !not block addressable
04487 TAPE_DRIVE 14 !tape drive unit
04488 MOVE_HEAD 13 !moving head device
04489 DRIVE_REQ 11 !drive request required
04490 !dual port drive only
04491 DRIVE_TYPE 8-0 !drive type designator
04492 END WORD_11
04493
04494 WORD_11 COMMON
04495 LA !look ahead register
04496 SECTOR_COUNT 10-6 !current sector under head
04497 EXT_FIELD 5-4 !counter extension field
04498 END WORD_11
04499
04500 WORD_11 COMMON
04501 SN !serial number register
04502 SERIAL_NO 15-0 !serial no. in BCD (4 digits)
04503 END WORD_11
04504
04505 WORD_11 COMMON
04506 OF !offset register
04507 SIGN_CNG 15 !sign change
04508 FMT22 12 !22 sector format
04509 ECC_INH 11 !inhibit ECC checking
04510 H_COM_INH 10 !inhibit header compare errors
04511 OFFSET 7-0 !offset magnitude and direction
04512 END WORD_11
04513
04514 WORD_11 COMMON
04515 DC !desired cylinder
04516 RP4_DCYL_NO 8-0 !desired cylinder for RP04
04517 RP6_DCYL_NO 9-0 !desired cylinder for RP06
04518 END WORD_11
04519
04520 WORD_11 COMMON
04521 CC !current cylinder
04522 RP4_CCYL_NO 8-0 !current cylinder for RP04
04523 RP6_CCYL_NO 9-0 !current cylinder for RP04
04524 END WORD_11
04525
04526 WORD_11 COMMON
04527 ER2 !error register 2
04528 RP4_ACUN 15 !AC unsafe
04529 RP7_PGE 15
04530
04531 PLO_UNS 13 !PLO unsafe
04532 RP7_CPU 13
04533
04534 RP4_30VU 12 !30 volts unsafe
04535 RP7_RWU3 12
04536
04537 INDEX_ERROR 11 !index clock error
04538 RP7_RWU2 11
04539
04540 NO_H_SEL 10 !no head select error
04541 RP7_RWU1 10
04542
04543 MULTI_H_SEL 9 !multiple head select error
04544 RP7_WOR 9
04545
04546 WRITE_UNS 8 !write unsafe
04547
04548 RP7_ERR_CODE 7-0
04549 RP4_FA_EN 7 !failsafe enable
04550 RP6_AB_ST 7 !abnormal stop
04551 RP4_FA_EN_6_AB_ST 7 !Either way
04552
04553 TRAN_UNSF 6 !transitions unsafe
04554
04555 TRAN_DET_F 5 !transitions detected failed
04556
04557 RP6_RP4_MSE 4 !motor sequence error
04558 RD_WR_UNSF 4 !read write unsafe
04559 RP4_MSE_6_RD_WR_UNSF 4 !Either way
04560
04561 C_SW_UNSF 3 !
04562
04563 W_SEL_UNSF 2 !
04564
04565 C_SK_UNSF 1 !
04566
04567 WR_C_UNSF 0 !write clock unsafe
04568 END WORD_11
04569
04570 WORD_11 COMMON
04571 ER3 !error register 3
04572 OFF_CYL 15 !off cylinder error
04573 RP7_BSE 15
04574
04575 SEEK_INC 14 !seek incomplete
04576
04577 RP6_OPER 13 !operator plug error
04578 RP7_DSE 13
04579
04580 RP7_CLF 11
04581 RP7_LBC 10
04582 RP7_LCE 9
04583 RP7_PHF 8
04584 RP7_DVC 7
04585
04586 AC_LOW 6 !AC low error
04587 RP7_IXU 6
04588
04589 DC_LOW 5 !DC low error
04590 RP7_DCU 5
04591
04592 RP6_35_VF 4 !35 volt supply failure
04593 RP4_NOT_6_35V 4 !Because different on RP04
04594 RP7_SDF 4
04595
04596 RP4_UNSF 3 !drive unsafe
04597 RP7_DPE 3
04598
04599 RP7_SBE 2
04600
04601 RP4_VE_US 1 !velocity unsafe
04602 RP6_WR_OS 1 !write with offset error
04603 RP4_VE_US_6_WR_OS 1 !Either way
04604 RP7_SCF 1
04605
04606 RP4_PS_UN 0 !power unsafe
04607 RP6_DC_UN 0 !DC unsafe
04608 RP4_PS_UN_6_DC_UN 0 !Either way
04609 RP7_RTO 0
04610 END WORD_11
04611
04612 WORD_11 COMMON
04613 ECC1 !ECC position register
04614 ECC_ERR_LOC 12-0 !location of error burst
04615 END WORD_11
04616
04617 WORD_11 COMMON
04618 ECC2 !ECC pattern register
04619 ECC_ERR_MASK 10-0 !error bit mask - 11 bits
04620 END WORD_11
04621
04622 !++
04623 !
04624 ! RM03 Registers - bit definitions
04625 !
04626 !--
04627
04628 WORD_11 COMMON
04629 RMCS1 !RM03 control register 1
04630 RH11_SPEC_COND 15 !special condition - RH11 only
04631 RH11_XFER_ERROR 14 !transfer error - RH11 only
04632 RH11_MBUS_CPE 13 !massbus control bus parity
04633 !error - RH11 only
04634 DRIVE_AVAIL 12 !drive available
04635 PORT_SEL 10 !port select
04636 UBADDR_EXT 9-8 !unibus adr extension bits
04637 READY 7 !unit ready
04638 INTR_ENAB 6 !interrupt enable
04639 FUNCTION 5-0 !drive function + go
04640 GO 0 !go
04641 END WORD_11
04642
04643 WORD_11 COMMON
04644 RMDS !RM03 drive status register
04645 ATTN_ACT 15 !attention active
04646 ERROR 14 !inclusive OR error bit
04647 PIP 13 !positioning in progress
04648 MOL 12 !medium on line
04649 WRITE_LOCK 11 !write lock
04650 LAST_BLOCK 10 !last block transferred
04651 PROG_ABLE 9 !programmable - dual port only
04652 DRIVE_PRES 8 !drive present
04653 DRIVE_READY 7 !drive ready
04654 VALID_VOL 6 !valid volume
04655 OFSET_MODE 0 !offset mode active
04656 END WORD_11
04657
04658 WORD_11 COMMON
04659 RMER1 !RM03 error register 1
04660 DATA_CHECK 15 !data check error
04661 UN_SAFE 14 !unsafe condition
04662 OPER_INC 13 !operation incomplete
04663 DR_T_ERROR 12 !drive timing error
04664 WR_LK_ERROR 11 !write lock error
04665 I_ADR_ERROR 10 !invalid address error
04666 A_OV_ERROR 9 !address overflow error
04667 H_CRC_ERROR 8 !header CRC error
04668 H_COM_ERROR 7 !header compare error
04669 ECC_ERROR 6 !hard ECC error
04670 WR_CK_FAIL 5 !write clock failure
04671 FMT_ERROR 4 !format error
04672 PAR_ERROR 3 !drive parity error
04673 RMR 2 !register modification refused
04674 ILL_REG 1 !illegal register reference
04675 ILL_FUNCT 0 !illegal function attempted
04676 END WORD_11
04677
04678 WORD_11 COMMON
04679 RMMR1 !RM03 maintenance register 1
04680 OCCUP 15 !occupied
04681 RUN_GO 14 !run / go
04682 END_BLOCK 13 !end of block level
04683 RX_EXCPT 12 !received exception
04684 ENB_SERCH 11 !enable search
04685 LOOK_SYNC 10 !pack looking for sync
04686 CRC_OUT 9 !enable CRC output
04687 PACK_DATA 8 !pack data area
04688 PACK_HEADER 7 !pack header area
04689 CONT 6 !continue
04690 PROM_STROB 5 !PROM strobe
04691 ENB_ECC 4 !enable ECC out
04692 WRITE_DATA 3 !write data
04693 LAST_SECTR 2 !last sector
04694 LAST_S_T 1 !last sector and track
04695 DIAG_MODE 0 !diagnostic mode
04696 END WORD_11
04697
04698 WORD_11 COMMON
04699 RMAS !RM03 attention summary
04700 ATTN7 7 !drive 7 attn active
04701 ATTN6 6 !drive 6 attn active
04702 ATTN5 5 !drive 5 attn active
04703 ATTN4 4 !drive 4 attn active
04704 ATTN3 3 !drive 3 attn active
04705 ATTN2 2 !drive 2 attn active
04706 ATTN1 1 !drive 1 attn active
04707 ATTN0 0 !drive 0 attn active
04708 END WORD_11
04709
04710 WORD_11 COMMON
04711 RMDA !RM03 drive address
04712 RM_TRACK 10-8 !track address
04713 SECTOR 4-0 !sector address
04714 END WORD_11
04715
04716 WORD_11 COMMON
04717 RMDT !RM03 drive type register
04718 MOVE_HEAD 13 !moving head disk
04719 DRIVE_REQ 11 !drive request required
04720 DRIVE_TYPE 8-0 !drive type
04721 END WORD_11
04722
04723 WORD_11 COMMON
04724 RMLA !RM03 look ahead register
04725 SECT_CNT 10-6 !sector count
04726 END WORD_11
04727
04728 WORD_11 COMMON
04729 RMSN !RM03 serial number register
04730 SER_NUM 15-0 !serial number in BCD code
04731 END WORD_11
04732
04733 WORD_11 COMMON
04734 RMOF !RMo3 offset register
04735 FMT_16 12 !16 bit format
04736 ECC_INH 11 !inhibit ECC checking
04737 H_COM_INH 10 !inhibit header compare chk
04738 OFFSET_DIRTN 7 !offset direction
04739 END WORD_11
04740
04741 WORD_11 COMMON
04742 RMDC !RM03 desired cylinder reg
04743 RM_DCYL_NO 9-0 !desired cylinder number
04744 END WORD_11
04745
04746 WORD_11 COMMON
04747 RMMR2 !RM03 maint register 2
04748 REQ_A 15 !request on port A
04749 REQ_B 14 !request on port B
04750 CONTR_TAG_A 13 !controller select tag
04751 COMND_BRNCH 12 !command sequencer is branching
04752 CONTR_TAG_B 11 !controller tag B
04753 HEAD_TAG 10 !controller select or head select tag
04754 BUS_IN_LINES 9-0 !bus in bits
04755 END WORD_11
04756
04757 WORD_11 COMMON
04758 RMER2 !RM03 error register 2
04759 SEEK_INC 14 !seek incomplete
04760 OPER_PLUG 13 !operator plug error
04761 INVLD_CMD 12 !invalid command
04762 LOSS_CLK 11 !lost clocks
04763 LOSS_CHK 10 !loss of bit check
04764 DC_FAULT 7 !DC or head select fault
04765 DATA_ERROR 3 !data error
04766 END WORD_11
04767
04768 WORD_11 COMMON
04769 RMECC1 !ECC position register
04770 ECC_POSITION 12-0 !position of error burst
04771 END WORD_11
04772
04773 WORD_11 COMMON
04774 RMECC2 !ECC pattern register
04775 ECC_PATTERN 10-0 !error pattern mask
04776 END WORD_11
04777 !++
04778 !
04779 ! Error register definitions for TM02/3
04780 !
04781 !--
04782
04783 WORD_11 COMMON
04784 MB_ERR ! Error register
04785 TM_PE_CORR 15 ! Correctible data error if PE
04786 TM_NRZI_CRC 15 ! CRC does not match computed CRC
04787 TM_PE_CORR_NRZI_CRC 15 ! Either
04788 TM_UNSAFE 14 !
04789 TM_OPER_INC 13 ! Operation incomplete
04790 TM_DR_T_ERROR 12 ! Drive timing error
04791 TM_NXF 11 ! Nonexecutable function
04792 TM_PE_CS 10 ! PE correctable skew
04793 TM_NRZI_ITM 10 ! Illegal tape mark
04794 TM_PE_CS_NRZI_ITM 10 ! Either of above
04795 TM_F_C_ERR 9 ! Frame count error
04796 TM_N_STD_GAP 8 ! Non standard gap
04797 TM_PE_PFE 7 ! Format error if PE
04798 TM_NRZI_LRC 7 ! Check char error if NRZI
04799 TM_PE_FE_NRZI_LRC 7 ! Either of above
04800 TM_PE_NDE 6 ! Noncorrectable data error if PE
04801 TM_NRZI_VPE 6 ! Vertical parity error if NRZI
04802 TM_PE_NDE_NRZI_VPE 6 ! Either of above
04803 TM_DBUS_PE 5 ! Data bus parity error
04804 TM_FMT_ERROR 4 ! Format error
04805 TM_CBUS_PE 3 ! control bus parity
04806 TM_REG_MOD 2 ! register modification refused
04807 TM_ILL_REG 1 ! Illegal register
04808 TM_ILL_FUNC 0 ! illegal function
04809 END WORD_11
04810
04811 WORD_11 COMMON
04812 DM_ER ! Error register for DX20
04813 DX_MP_ERROR 7 ! Microprocessor error
04814 DX_MP_STOP 6 ! Microprocessor stopped
04815 DX_UBUS_PE 5 ! Micro bus parity error
04816 DX_DBUF_PE 4 ! Data buffer parity error
04817 DX_CBUS_PE 3 ! Control bus parity error
04818 DX_REG_MOD 2 ! Register modification refused
04819 DX_ILL_REG 1 ! Illegal register
04820 DX_ILL_FUNCT 0 ! Illegal functions
04821 END WORD_11
04822
04823 !++
04824 ! DECNET "Event Logging Message" word definitions
04825 !--
04826
04827 WORD_11 COMMON
04828 SINK_FLAGS
04829 MONITOR 2
04830 FILE 1
04831 CONSOLE 0
04832 END WORD_11
04833
04834
04835 WORD_11 COMMON
04836 EVENT_CODE ! DECNET "Event Logging message"
04837 EVENT_CLASS 14-6
04838 EVENT_TYPE 4-0
04839 END WORD_11
04840
04841
04842 WORD_11 COMMON
04843 DATA_ID
04844 PARAMETER_COUNTER_FLAG 15 ! 0 = Parameter data
04845 ! 1 = Counter data
04846 ! Bit definitions for Parameter data
04847 ! Reserved 14-12
04848 PARAMETER_TYPE 11-0
04849 ! Bit definitions for Counter data
04850 COUNTER_WIDTH 14-13 ! 0 = reserved
04851 ! 1 = 8 bits
04852 ! 2 = 16 bits
04853 ! 3 = 32 bits
04854 BIT_MAPPED_FLAG 12 ! 0 = Not bit mapped
04855 ! 1 = Bit mapped
04856 COUNTER_TYPE 11-0 ! Decimal counter number
04857 END WORD_11
04858
04859
04860 WORD_11 COMMON
04861 DATA_TYPE ! Present for Parameter data only
04862 CODED_FLAG 7 ! 0 = Not coded
04863 ! 1 = Coded
04864 ! Bit definitions for Non-coded data
04865 FIELD_TYPE 6 ! 0 = Binary number
04866 ! 1 = ASCII image field
04867 ! bits 5-0 = 0
04868 OUTPUT_FORMAT 5-4 ! 0 = Unsigned decimal number
04869 ! 1 = Signed decimal number
04870 ! 2 = Hexadecimal number
04871 ! 3 = Octal number
04872 DATA_LENGTH 3-0 ! 0 = Data is image field
04873 ! Bit definitions for Coded data
04874 MULTIPLE_FIELD 6 ! 0 = Single field
04875 ! 1 = Multiple field
04876 FIELD_COUNT 5-0 ! Number of bytes for Single field
04877 ! Number of fields for Multiple fields
04878 END WORD_11
04879
04880
04881
04882
04883
04884
04885
04886
04887
04888
04889
04890 !++
04891 !
04892 ! End of DEFINE.EYE
04893 !
04894 !--
CREF TABLES:
FIELD NAME FIELD DESC BLOCK NAME LINE #
$R110E 1 3 FE_RELOAD_20 1539
$R111E 1 4 FE_RELOAD_20 1540
$R1ASF 1 5 FE_RELOAD_20 1541
$R1BSF 1 10 FE_RELOAD_20 1546
$R1DPF 1 2 FE_RELOAD_20 1538
$R1GTF 1 0 FE_RELOAD_20 1536
$R1NRL 1 11 FE_RELOAD_20 1547
$R1OPF 1 1 FE_RELOAD_20 1537
$R1PDF 1 7 FE_RELOAD_20 1543
$R1PUF 1 8 FE_RELOAD_20 1544
$R1RLF 1 6 FE_RELOAD_20 1542
$R1RMF 1 9 FE_RELOAD_20 1545
$R1RTC 1 30-35 FE_RELOAD_20 1554
AC0 0 0-35 AC_BLOCK_6_DATA 1923
AC0 0 0-35 AC_BLOCK_7_DATA 1932
AC0 0 0-35 SAVED_ACS 3867
AC1 1 0-35 AC_BLOCK_6_DATA 1924
AC1 1 0-35 AC_BLOCK_7_DATA 1933
AC1 1 0-35 SAVED_ACS 3868
AC10 8 0-35 SAVED_ACS 3875
AC11 9 0-35 SAVED_ACS 3876
AC12 4 0-35 AC_BLOCK_6_DATA 1927
AC12 10 0-35 SAVED_ACS 3877
AC13 11 0-35 SAVED_ACS 3878
AC14 12 0-35 SAVED_ACS 3879
AC15 13 0-35 SAVED_ACS 3880
AC16 14 0-35 SAVED_ACS 3881
AC17 15 0-35 SAVED_ACS 3882
AC2 2 0-35 AC_BLOCK_6_DATA 1925
AC2 2 0-35 AC_BLOCK_7_DATA 1934
AC2 2 0-35 SAVED_ACS 3869
AC3 3 0-35 AC_BLOCK_6_DATA 1926
AC3 3 0-35 SAVED_ACS 3870
AC4 4 0-35 SAVED_ACS 3871
AC5 5 0-35 SAVED_ACS 3872
AC6 6 0-35 SAVED_ACS 3873
AC7 7 0-35 SAVED_ACS 3874
ACCESSIBLE ** 2 PAGE_FAIL_WORD 3992
ACRCERR ** 04 ECCSTA 2886
ACRC_WMC_DRBUS ** 02 WMCSTA 3154
AC_BLOCK_6_DATA 90 BODY KL_CPU_STATUS_10 1158
AC_BLOCK_6_DATA 90 BODY KL_CPU_STATUS_20 1674
AC_BLOCK_7_DATA 95 BODY KL_CPU_STATUS_10 1159
AC_BLOCK_7_DATA 95 BODY KL_CPU_STATUS_20 1675
AC_LOW ** 6 ER3 4586
ADDRESS_AND 5 0-35 CPU_PAR_INT_20 1633
ADDRESS_AND 5 0-35 PAR_SWEEP_DATA 3851
ADDRESS_AND 9 0-35 NXM_MEMORY_SWEEP_10 1034
ADDRESS_AND 11 0-35 OLD_CPU_NXM_ERR_10 281
ADDRESS_OR 6 0-35 CPU_PAR_INT_20 1634
ADDRESS_OR 7 0-35 PAR_SWEEP_DATA 3853
ADDRESS_OR 10 0-35 NXM_MEMORY_SWEEP_10 1035
ADDRESS_OR 12 0-35 OLD_CPU_NXM_ERR_10 282
ADDRESS_PAR ** 29 APR_STATUS 3969
ADJ_NODE_NAME 3 MAIN$Z NET_HARDWARE_ERR 1753
AMT ** 05 ECCSTA 2887
AMTIE ** 7-0 RAMT 2704
AMTIE0 ** 02 CH0TIE 2903
AMTIE1 ** 02 CH1TIE 2917
AMTIE2 ** 02 CH2TIE 2932
AMTIE3 ** 02 CH3TIE 2948
AMTIE4 ** 02 CH4TIE 2964
AMTIE5 ** 02 CH5TIE 2980
AMTIE6 ** 02 CH6TIE 2995
AMTIE7 ** 02 CH7TIE 3011
AMTIEP ** 02 CHPTIE 3026
AMTIE_P ** 00 PSTAT 3061
AMTIE_P ** 00 RPSTA 2805
AMTIE_THR ** 1-0 TUDIAG 3467
APRSTS_NXM ** 25 APR_STATUS 3965
APR_ID 0 0-35 KL_CPU_STATUS_10 1140
APR_ID 0 0-35 KL_CPU_STATUS_20 1656
APR_STATUS 0 0-35 CPU_PAR_INT_20 1628
APR_STATUS 1 0-35 KL_CPU_STATUS_10 1141
APR_STATUS 1 0-35 KL_CPU_STATUS_20 1657
APR_STATUS 2 0-35 KL_PAR_NXM_INT_10 956
APR_STATUS 11 0-35 CPU_PAR_INT_10 1125
APR_STATUS 35 0-35 MONITOR_BUG_DATA_20 1351
ARA_ERR ** 5 MIAB_STAT 3429
ATA ** 03 CASSTA 3092
ATA0 ** 0 AS 4475
ATA1 ** 1 AS 4474
ATA2 ** 2 AS 4473
ATA3 ** 3 AS 4472
ATA4 ** 4 AS 4471
ATA5 ** 5 AS 4470
ATA6 ** 6 AS 4469
ATA7 ** 7 AS 4468
ATN_CAS_4 4 0-17 TM78_CAS_REGS 2157
ATN_CAS_4 4 18-35 TM78_CAS_REGS 2157
ATTEMPTED_CONTINUES 3 0-35 CPU_PAR_INT_10 1117
ATTEN_ENABLE ** 30 CONO 4322
ATTN0 ** 0 RMAS 4707
ATTN1 ** 1 RMAS 4706
ATTN2 ** 2 RMAS 4705
ATTN3 ** 3 RMAS 4704
ATTN4 ** 4 RMAS 4703
ATTN5 ** 5 RMAS 4702
ATTN6 ** 6 RMAS 4701
ATTN7 ** 7 RMAS 4700
ATTN_ACT ** 15 DS 4413
ATTN_ACT ** 15 RMDS 4645
A_OV_ERROR ** 9 ER1 4439
A_OV_ERROR ** 9 RMER1 4666
BAD_WORD 1 0-35 CPU_PAR_TRAP_10 1088
BAD_WORD 1 0-35 CPU_PAR_TRAP_20 1583
BAD_WORD 4 0-35 KL_OR_KS_PAR_TRAP_10 998
BAI_INH ** 3 RH11_RMCS2 4367
BAT_FREE 35 9-17 MASSBUS_ERR_10 535
BCT_CAS_5 5 0-17 TM78_CAS_REGS 2158
BCT_CAS_5 5 18-35 TM78_CAS_REGS 2158
BIT_MAPPED_FLAG ** 12 DATA_ID 4854
BIT_PER_PAGE_FLAG 2 35 CONFIG_CHANGE_10 664
BIT_PER_PAGE_FLAG 12 35 NXM_MEMORY_SWEEP_10 1038
BIT_PER_PAGE_FLAG 12 35 SYSTEM_RELOAD_10 216
BIT_PER_PAGE_FLAG 14 35 OLD_CPU_NXM_ERR_10 286
BLOCKS_READ 8 0-35 MASSBUS_ERR_20 1389
BLOCKS_WRITE 9 0-35 MASSBUS_ERR_20 1391
BLOCK_ADDRESS ** 20-35 PBAR 4258
BLOCK_ADDRESS ** 20-35 SBAR 4242
BODY_FORMAT 0 18-20 HEADER 141
BOP ** 03 RPATH 2593
BOT_TU ** 02 TUSTAT 3377
BUGHLT_ADDRESS 5 0-35 SYSTEM_RELOAD_20 1308
BUGHLT_DATE_TIME 33 0-35 MONITOR_BUG_DATA_20 1349
BUG_MESSAGE 9 MAIN$Z MONITOR_BUG_DATA_20 1339
BUG_TYPE_FLAG 4 34-35 MONITOR_BUG_DATA_20 1328
BUS_ADDRESS ** 15-0 RH11_RMBA 4373
BUS_IN_LINES ** 9-0 RMMR2 4754
BYT1_CNT 9 28-35 TM78_SENSE_BYTES 2474
BYT2_CNT 9 20-27 TM78_SENSE_BYTES 2475
BYTE_CNT ** 7 - BYT1_CNT 3243
BYTE_CNT2 ** 7 - BYT2_CNT 3253
BYTE_COUNT 0 0-35 DECNET_PHASE_III 1802
BYTE_COUNT 5 0-35 NET_HARDWARE_ERR 1759
CACHEABLE ** 7 PAGE_FAIL_WORD 3997
CACHE_DIR_PAR ** 28 APR_STATUS 3968
CACHE_DISABLED 4 5 CPU_PAR_TRAP_10 1096
CACHE_DISABLED 9 5 KL_OR_KS_PAR_TRAP_10 1008
CACHE_FAILED_FLAG 4 2 CPU_PAR_TRAP_10 1093
CACHE_FAILED_FLAG 7 2 CPU_PAR_TRAP_20 1592
CACHE_FAILED_FLAG 9 2 KL_OR_KS_PAR_TRAP_10 1005
CACHE_LOOK ** 18 PAGE_STATUS 4014
CACHE_OFF_COUNT 4 27-35 CPU_PAR_TRAP_10 1099
CACHE_OFF_COUNT 9 27-35 KL_OR_KS_PAR_TRAP_10 1011
CACHE_ON_COUNT 4 18-26 CPU_PAR_TRAP_10 1098
CACHE_ON_COUNT 9 18-26 KL_OR_KS_PAR_TRAP_10 1010
CACHE_USE_FLAG 4 3 CPU_PAR_TRAP_10 1094
CACHE_USE_FLAG 7 3 CPU_PAR_TRAP_20 1593
CACHE_USE_FLAG 9 3 KL_OR_KS_PAR_TRAP_10 1006
CAHE_LOAD ** 19 PAGE_STATUS 4015
CASPE ** 05 CASSTA 3096
CASSTA 7 20-27 TM78_SENSE_BYTES 2467
CAS_FAIL_CODE ** 15-10 DST_CAS_1 2263
CAS_INT_CODE ** 05-00 DST_CAS_1 2264
CBUSSTA 8 10-17 TM78_SENSE_BYTES 2468
CBUS_EP ** 8 PREP_REG 4311
CCW1 26 0-35 DX20_ERR_10 589
CCW1 28 0-35 MASSBUS_ERR_20 1419
CCW2 27 0-35 DX20_ERR_10 590
CCW2 29 0-35 MASSBUS_ERR_20 1420
CCW_FAIL_CNT 35 27-35 MASSBUS_ERR_10 538
CD_0 ** 0 ECCOR 2865
CD_1 ** 1 ECCOR 2867
CD_2 ** 2 ECCOR 2868
CD_3 ** 3 ECCOR 2869
CD_4 ** 4 ECCOR 2870
CD_5 ** 5 ECCOR 2871
CD_6 ** 6 ECCOR 2872
CD_7 ** 7 ECCOR 2873
CH0TIE 4 28-35 TM78_SENSE_BYTES 2454
CH1TIE 4 20-27 TM78_SENSE_BYTES 2455
CH2TIE 5 10-17 TM78_SENSE_BYTES 2456
CH3TIE 5 2-9 TM78_SENSE_BYTES 2457
CH4TIE 5 28-35 TM78_SENSE_BYTES 2458
CH5TIE 5 20-27 TM78_SENSE_BYTES 2459
CH6TIE 6 10-17 TM78_SENSE_BYTES 2460
CH7TIE 6 2-9 TM78_SENSE_BYTES 2461
CHANGE_REASON 2 0-11 CONFIG_CHANGE_10 651
CHANGE_REASON 4 0-35 CONFIG_CHANGE_20 1507
CHANNEL_CMD_WD 14 0-35 CSB_DX10 2030
CHANNEL_CMD_WD_2 15 0-35 CSB_DX10 2031
CHANNEL_ERRORS 9 0-35 PAR_SWEEP_DATA 3855
CHANNEL_NUMBER 3 9-11 CONFIG_CHANGE_20 1503
CHANNEL_REF ** 3 RDERA_STATUS 4036
CHAN_ADDR 2 0-17 DX20_ERR_10 551
CHAN_ADDR 4 5-11 MASSBUS_ERR_10 498
CHAN_ADDR 33 0-35 MASSBUS_ERR_20 1424
CHAN_CNTRL_STAT 0 0-35 CSB_TM02 2084
CHAN_ERROR ** 22 CONI_STATUS 4232
CHAN_LOGO0 25 0-35 MASSBUS_ERR_20 1416
CHAN_LOGO1 26 0-35 MASSBUS_ERR_20 1417
CHAN_LOGO2 27 0-35 MASSBUS_ERR_20 1418
CHAN_LOGOUT_0 23 0-35 DX20_ERR_10 586
CHAN_LOGOUT_1 24 0-35 DX20_ERR_10 587
CHAN_LOGOUT_2 25 0-35 DX20_ERR_10 588
CHAN_NUMBER 33 33-35 MASSBUS_ERR_20 1426
CHAN_RDY ** 25 CONI_STATUS 4229
CHAN_TYPE 2 18-26 DX20_ERR_10 552
CHECK_TALLY 15 0-35 MONITOR_BUG_DATA_10 239
CHECK_TALLY 34 0-35 MONITOR_BUG_DATA_20 1350
CHKSM_ERRORS 6 24-35 OLD_DISK_STATS_10 844
CHKSM_ERRORS 7 24-35 DSCSBP 3596
CHKSM_ERRORS 7 24-35 MASSBUS_ERR_10 508
CHN_BLK_ID 3 11-12 USAGE_DATA_20 1471
CHN_DEV_PAR_COUNT 3 0-35 CHANNEL_ERROR_REPORT_10 387
CHN_LOGOUT_0 0 BODY CHN_LOGOUT_LIST 1939
CHN_LOGOUT_1 4 BODY CHN_LOGOUT_LIST 1940
CHN_LOGOUT_2 8 BODY CHN_LOGOUT_LIST 1941
CHN_LOGOUT_3 12 BODY CHN_LOGOUT_LIST 1942
CHN_LOGOUT_4 16 BODY CHN_LOGOUT_LIST 1943
CHN_LOGOUT_5 20 BODY CHN_LOGOUT_LIST 1944
CHN_LOGOUT_6 24 BODY CHN_LOGOUT_LIST 1945
CHN_LOGOUT_7 28 BODY CHN_LOGOUT_LIST 1946
CHN_LOGOUT_LIST 22 BODY KL_CPU_STATUS_10 1152
CHN_LOGOUT_LIST 22 BODY KL_CPU_STATUS_20 1668
CHN_MEM_PAR_COUNT 2 0-35 CHANNEL_ERROR_REPORT_10 386
CHN_NUMBER 4 0-35 USAGE_DATA_20 1476
CHN_PIA 3 8-10 USAGE_DATA_20 1470
CHN_STATUS_WORD 1 0-35 CHN_LOGOUT 1952
CHN_TYPE 3 13-17 USAGE_DATA_20 1472
CHPTIE 6 28-35 TM78_SENSE_BYTES 2462
CINDBG 9 0-35 EXTRACTED_CRASH_INFO_10 310
CINDEL 23 0-35 EXTRACTED_CRASH_INFO_10 324
CINEPO 20 0-35 EXTRACTED_CRASH_INFO_10 321
CINEPP 21 0-35 EXTRACTED_CRASH_INFO_10 322
CINERC 22 0-35 EXTRACTED_CRASH_INFO_10 323
CINHSO 10 0-35 EXTRACTED_CRASH_INFO_10 311
CINLNM 6 0-35 EXTRACTED_CRASH_INFO_10 307
CINLST 64 0-35 EXTRACTED_CRASH_INFO_10 365
CINMMS 13 0-35 EXTRACTED_CRASH_INFO_10 314
CINMNA 72 0-35 EXTRACTED_CRASH_INFO_10 373
CINMPA 17 0-35 EXTRACTED_CRASH_INFO_10 318
CINMPC 16 0-35 EXTRACTED_CRASH_INFO_10 317
CINMPP 19 0-35 EXTRACTED_CRASH_INFO_10 320
CINMPW 18 0-35 EXTRACTED_CRASH_INFO_10 319
CINNDS 25 0-35 EXTRACTED_CRASH_INFO_10 326
CINNJA 71 0-35 EXTRACTED_CRASH_INFO_10 372
CINNJS 26 0-35 EXTRACTED_CRASH_INFO_10 327
CINNUL 65 0-35 EXTRACTED_CRASH_INFO_10 366
CINNWC 11 0-35 EXTRACTED_CRASH_INFO_10 312
CINOHT 66 0-35 EXTRACTED_CRASH_INFO_10 367
CINPAA 37 0-35 EXTRACTED_CRASH_INFO_10 338
CINPAC 38 0-35 EXTRACTED_CRASH_INFO_10 339
CINPAR 31 0-35 EXTRACTED_CRASH_INFO_10 332
CINPCS 41 0-35 EXTRACTED_CRASH_INFO_10 342
CINPLA 32 0-35 EXTRACTED_CRASH_INFO_10 333
CINPMR 33 0-35 EXTRACTED_CRASH_INFO_10 334
CINPOA 39 0-35 EXTRACTED_CRASH_INFO_10 340
CINPOC 40 0-35 EXTRACTED_CRASH_INFO_10 341
CINPOK 5 0-35 EXTRACTED_CRASH_INFO_10 306
CINPSC 35 0-35 EXTRACTED_CRASH_INFO_10 336
CINPTR 2 0-35 EXTRACTED_CRASH_INFO_10 303
CINPTS 34 0-35 EXTRACTED_CRASH_INFO_10 335
CINPUE 36 0-35 EXTRACTED_CRASH_INFO_10 337
CINRHC 61 0-35 EXTRACTED_CRASH_INFO_10 362
CINRHI 49 0-35 EXTRACTED_CRASH_INFO_10 350
CINRHO 45 0-35 EXTRACTED_CRASH_INFO_10 346
CINRHR 53 0-35 EXTRACTED_CRASH_INFO_10 354
CINRHX 57 0-35 EXTRACTED_CRASH_INFO_10 358
CINRLC 62 0-35 EXTRACTED_CRASH_INFO_10 363
CINRLI 50 0-35 EXTRACTED_CRASH_INFO_10 351
CINRLO 46 0-35 EXTRACTED_CRASH_INFO_10 347
CINRLR 54 0-35 EXTRACTED_CRASH_INFO_10 355
CINRLX 58 0-35 EXTRACTED_CRASH_INFO_10 359
CINRNC 60 0-35 EXTRACTED_CRASH_INFO_10 361
CINRNI 48 0-35 EXTRACTED_CRASH_INFO_10 349
CINRNO 44 0-35 EXTRACTED_CRASH_INFO_10 345
CINRNR 52 0-35 EXTRACTED_CRASH_INFO_10 353
CINRNX 56 0-35 EXTRACTED_CRASH_INFO_10 357
CINRSC 59 0-35 EXTRACTED_CRASH_INFO_10 360
CINRSI 47 0-35 EXTRACTED_CRASH_INFO_10 348
CINRSO 43 0-35 EXTRACTED_CRASH_INFO_10 344
CINRSP 42 0-35 EXTRACTED_CRASH_INFO_10 343
CINRSR 51 0-35 EXTRACTED_CRASH_INFO_10 352
CINRSX 55 0-35 EXTRACTED_CRASH_INFO_10 356
CINSEC 1 0-35 EXTRACTED_CRASH_INFO_10 302
CINSIZ 4 0-35 EXTRACTED_CRASH_INFO_10 305
CINSJN 27 0-35 EXTRACTED_CRASH_INFO_10 328
CINSNE 70 0-35 EXTRACTED_CRASH_INFO_10 371
CINSPC 24 0-35 EXTRACTED_CRASH_INFO_10 325
CINSPE 15 0-35 EXTRACTED_CRASH_INFO_10 316
CINSPN 28 0-35 EXTRACTED_CRASH_INFO_10 329
CINSPP 30 0-35 EXTRACTED_CRASH_INFO_10 331
CINSUU 29 0-35 EXTRACTED_CRASH_INFO_10 330
CINTIC 7 0-35 EXTRACTED_CRASH_INFO_10 308
CINTIM 3 0-35 EXTRACTED_CRASH_INFO_10 304
CINTJC 68 0-35 EXTRACTED_CRASH_INFO_10 369
CINTNE 69 0-35 EXTRACTED_CRASH_INFO_10 370
CINTPE 14 0-35 EXTRACTED_CRASH_INFO_10 315
CINTUC 67 0-35 EXTRACTED_CRASH_INFO_10 368
CINUNI 73 0-35 EXTRACTED_CRASH_INFO_10 374
CINUPT 12 0-35 EXTRACTED_CRASH_INFO_10 313
CINUPT 63 0-35 EXTRACTED_CRASH_INFO_10 364
CINVER 8 0-35 EXTRACTED_CRASH_INFO_10 309
CLEAR_DONE ** 32 CONO 4324
CLEAR_MBC ** 25 CONO 4317
CLEAR_RAE ** 24 CONO 4316
CLEAR_XFER ** 26 CONO 4318
CLOCK_STOPPED ** 02 RPATH 2592
CMDCOD 0 10-17 TM78_SENSE_BYTES 2436
CMDPE ** 05 PSTAT 3068
CMD_A16 ** 08 CMD_CAS_0 2234
CMD_A17 ** 09 CMD_CAS_0 2233
CMD_CAS_0 0 0-17 TM78_CAS_REGS 2153
CMD_CAS_0 0 18-35 TM78_CAS_REGS 2153
CMD_CODE ** 7 - CMDCOD 2501
CMD_DONE ** 32 CONI_STATUS 4222
CMD_DR_AVAIL ** 11 CMD_CAS_0 2225
CMD_FUNC_CODE ** 05-01 CMD_CAS_0 2254
CMD_GO_BIT ** 00 CMD_CAS_0 2255
CMD_INT_EN ** 06 CMD_CAS_0 2244
CMD_MCPE ** 13 CMD_CAS_0 2214
CMD_PE ** 7 MIAB_STAT 3437
CMD_PORTSEL ** 10 CMD_CAS_0 2228
CMD_READY_DT ** 07 CMD_CAS_0 2237
CMD_SPL_COND ** 15 CMD_CAS_0 2202
CMD_TRAN_ERR ** 14 CMD_CAS_0 2207
CNTRLLER_REG 4 0-35 TAPE_ERR_10 724
CNT_CAS_2 2 0-17 TM78_CAS_REGS 2155
CNT_CAS_2 2 18-35 TM78_CAS_REGS 2155
CNT_CMD_ADR ** 01-00 CNT_CAS_2 2318
CNT_FORMAT ** 14-12 CNT_CAS_2 2277
CNT_REC_CNT ** 07-02 CNT_CAS_2 2298
CNT_SER ** 15 CNT_CAS_2 2269
CNT_SKIP_CNT ** 11-08 CNT_CAS_2 2291
CODED_FLAG ** 7 DATA_TYPE 4862
COMMAND_CODE 0 12-17 CONFIG_CHANGE_20 1499
COMMAND_CODE 2 12-17 CONFIG_CHANGE_10 652
COMND_BRNCH ** 12 RMMR2 4751
CONFIG_RPT_FLAG 0 4 FE_SUB 3744
CONI 2 0-35 CSB_TM78 2126
CONI 10 0-35 CSB_DX10 2019
CONI_AT_ERR 14 0-35 TAPE_ERR_10 768
CONI_DTE_LIST 18 0-35 KL_CPU_STATUS_10 1151
CONI_DTE_LIST 18 0-35 KL_CPU_STATUS_20 1667
CONI_FINAL 6 0-35 DX20_ERR_10 566
CONI_FINAL 6 0-35 MASSBUS_ERR_10 505
CONI_FINAL 6 0-35 MASSBUS_ERR_20 1387
CONI_INITIAL 0 0-35 CSB_TM02 2080
CONI_INITIAL 5 0-35 DX20_ERR_10 565
CONI_INITIAL 5 0-35 MASSBUS_ERR_10 502
CONI_INITIAL 5 0-35 MASSBUS_ERR_20 1385
CONI_RH20_LIST 10 0-35 KL_CPU_STATUS_10 1150
CONI_RH20_LIST 10 0-35 KL_CPU_STATUS_20 1666
CONI_RP10 5 0-35 OLD_DISK_ERR_10 424
CONO_RESET_CLP ** 28 CONO 4320
CONSOLE ** 0 SINK_FLAGS 4831
CONT ** 6 RMMR1 4689
CONTEN ** 07 CASSTA 3101
CONTENTS_AND 6 0-35 PAR_SWEEP_DATA 3852
CONTENTS_AND 7 0-35 CPU_PAR_INT_20 1635
CONTENTS_OR 8 0-35 CPU_PAR_INT_20 1636
CONTENTS_OR 8 0-35 PAR_SWEEP_DATA 3854
CONTINUE_COUNT 3 0-35 OLD_CPU_MEM_PAR_ERR_10 254
CONTROLLER_NUMBER 0 18-35 SBDIAG_LIST 3894
CONTROLLER_NUMBER 3 12-14 CONFIG_CHANGE_20 1504
CONTROLLER_NUMBER 16 27-29 OLD_DISK_ERR_10 446
CONTROLLER_TYPE 4 12-14 TAPE_ERR_10 730
CONTROLLER_TYPE 16 21-26 OLD_DISK_ERR_10 443
CONTR_TAG_A ** 13 RMMR2 4750
CONTR_TAG_B ** 11 RMMR2 4752
CONT_CLEAR ** 5 RH11_RMCS2 4365
CORRECTED_DATA_P ** 07 RPSTA 2812
COUNTER_TYPE ** 11-0 DATA_ID 4856
COUNTER_WIDTH ** 14-13 DATA_ID 4850
CPU_NAME 0 0-35 CPU_PAR_INT_10 1114
CPU_NAME 0 0-35 KL_OR_KS_PAR_TRAP_10 994
CPU_NAME 0 0-35 KL_PAR_NXM_INT_10 954
CPU_NAME 0 0-35 NXM_MEMORY_SWEEP_10 1025
CPU_NAME 0 0-35 OLD_CPU_MEM_PAR_ERR_10 251
CPU_NAME 0 0-35 OLD_CPU_NXM_ERR_10 270
CPU_NAME 0 0-35 PAR_MEMORY_SWEEP_10 1046
CPU_SERIAL_NUMBER 1 0-35 MONITOR_BUG_DATA_20 1322
CPU_SERIAL_NUMBER 3 0-35 SYSTEM_RELOAD_20 1304
CPU_SERIAL_NUMBER 7 0-35 MONITOR_BUG_DATA_10 230
CPU_SERIAL_NUMBER 9 0-35 SYSTEM_RELOAD_10 209
CRASH_EXTRACT 0 16 HEADER 139
CRASH_STR 0 0-35 EXTRACTED_CRASH_INFO_10 301
CRCE ** 07 ECCSTA 2890
CRCWRD 3 20-27 TM78_SENSE_BYTES 2451
CRC_0 ** 0 CRCWRD 2850
CRC_1 ** 1 CRCWRD 2851
CRC_2 ** 2 CRCWRD 2852
CRC_3 ** 3 CRCWRD 2853
CRC_4 ** 4 CRCWRD 2854
CRC_5 ** 5 CRCWRD 2855
CRC_6 ** 6 CRCWRD 2856
CRC_7 ** 7 CRCWRD 2857
CRC_OUT ** 9 RMMR1 4686
CRC_WMC_DRBUS ** 03 WMCSTA 3157
CSB_DX10_AT_END 9 HEAD TAPE_ERR_10 759
CSB_DX10_AT_ERR 8 HEAD TAPE_ERR_10 754
CSB_TM02_AT_END 9 HEAD TAPE_ERR_10 760
CSB_TM02_AT_ERR 8 HEAD TAPE_ERR_10 755
CSB_TM10_AT_END 9 HEAD TAPE_ERR_10 757
CSB_TM10_AT_ERR 8 HEAD TAPE_ERR_10 752
CSB_TM78_AT_END 9 HEAD TAPE_ERR_10 758
CSB_TM78_AT_ERR 8 HEAD TAPE_ERR_10 753
CSR_DSR_FLAG ** 33 DX10_CSR 2066
CSR_IGN_LEN_ERR ** 31 DX10_CSR 2064
CSR_LEN_ERR ** 30 DX10_CSR 2063
CSR_OPI ** 35 DX10_CSR 2068
CSR_PAR_ERR ** 29 DX10_CSR 2062
CSR_PRG_STAT ** 24 DX10_CSR 2058
CSR_SBYTE_RD_ERR ** 34 DX10_CSR 2067
CSR_SEL_ERR ** 27 DX10_CSR 2060
CSR_SEQ_ERR ** 28 DX10_CSR 2061
CSR_TYPE ** 25-26 DX10_CSR 2059
CSR_UNUSED ** 32 DX10_CSR 2065
CS_PTR 3 0-35 KS_HALT_STATUS_20 1570
CTRL_ADDR 4 5-11 DX20_ERR_10 561
CTRL_NUMBER 4 15-17 DX20_ERR_10 563
CTRL_NUMBER 4 15-17 MASSBUS_ERR_10 500
CTRL_TYPE 4 12-14 DX20_ERR_10 562
CURRENT_BLOCK ** 6-8 PAGE_DATAI 3979
CYLINDER 23 0-35 MASSBUS_ERR_20 1412
C_SK_UNSF ** 1 ER2 4565
C_SW_UNSF ** 3 ER2 4561
DAC 2 0-35 CSB_DX10 1995
DAE_VERSION 0 0-35 DAEMON_STARTED_10 405
DAG 18 0-35 CSB_DX10 2034
DATA ** 15-0 RH11_RMDB 4378
DATA_CHECK ** 15 ER1 4433
DATA_CHECK ** 15 RMER1 4660
DATA_ECC ** 7-0 RDATA 2842
DATA_ENV ** 7 MR 4456
DATA_ERROR ** 3 RMER2 4765
DATA_LATE ** 15 RH11_RMCS2 4355
DATA_LENGTH ** 3-0 DATA_TYPE 4872
DATA_LOOP ** 27 DCR 4295
DATA_P ** 06 RPSTA 2811
DATA_PE ** 18 CONI_STATUS 4236
DATA_POINTER 5 0-35 SOFTWARE_EVENT_10 620
DATA_READY ** 04 RPATH 2596
DATE_TIME 1 0-35 CONFIG_CHANGE_10 649
DAT_ERR 4 2 MASSBUS_ERR_20 1378
DBUSSTA 8 2-8 TM78_SENSE_BYTES 2469
DC_FAULT ** 7 RMER2 4764
DC_LOW ** 5 ER3 4589
DDR_A 11 10-17 TM78_SENSE_BYTES 2480
DDR_B 11 2-9 TM78_SENSE_BYTES 2481
DEBPTR 0 0-35 SOFTWARE_REQ_DATA_10 685
DEL_SCR ** 29 CONO 4321
DEPOSIT_PROTECT 5 0-35 DTE_BLOCK 3628
DEPOSIT_RELOC 6 0-35 DTE_BLOCK 3629
DETECTING_DTE 6 0-35 FE_DATA 3734
DEVICE_DATA 2 0-35 DEVICE_STATUS_10 1175
DEVICE_NAME 0 0-35 CHANNEL_ERROR_REPORT_10 384
DEVICE_NAME 0 0-35 OLD_TAPE_STATS_10 865
DEVICE_NAME 2 0-35 CONFIG_CHANGE_20 1501
DEVICE_NAME_1 0 0-35 CONFIG_CHANGE_10 641
DEVICE_NAME_2 1 0-35 CONFIG_CHANGE_10 646
DEV_ANSWER 3 0-35 ERROR_LOG 3711
DEV_BLK_ID 3 29-30 USAGE_DATA_20 1474
DEV_CODE 4 18-35 FE_DATA 3728
DEV_ERR 4 4 MASSBUS_ERR_20 1380
DEV_NAM 0 0-35 DX20_ERR_10 549
DEV_NAM 0 0-35 MASSBUS_ERR_10 489
DEV_NAM 0 0-35 MASSBUS_ERR_20 1365
DEV_NAM 0 0-35 TAPE_ERR_10 717
DEV_NAM 1 0-35 DSCSBP 3580
DEV_NAME 0 0-35 MASSBUS_ERR_20 1366
DEV_NUMBER 4 14-17 FE_DATA 3727
DEV_PIA 3 26-28 USAGE_DATA_20 1473
DEV_SEL_CODE ** 15-17 PREP_REG 4310
DEV_TYPE 2 27-35 DX20_ERR_10 553
DEV_TYPE 3 31-35 USAGE_DATA_20 1475
DG1_CAS_3 3 0-17 TM78_CAS_REGS 2156
DG1_CAS_3 3 18-35 TM78_CAS_REGS 2156
DG2_CAS_11 9 0-17 TM78_CAS_REGS 2183
DG2_CAS_11 9 18-35 TM78_CAS_REGS 2183
DG3_CAS_12 10 0-17 TM78_CAS_REGS 2184
DG3_CAS_12 10 18-35 TM78_CAS_REGS 2184
DIAG_MODE ** 0 MR 4463
DIAG_MODE ** 0 RMMR1 4695
DIAG_READ_DATA ** 18-35 WR 4288
DIAG_WRITE_DATA ** 18-35 RR 4281
DIRECTORY 1 0-35 FE_DATA 3723
DIS_RAE ** 9 PREP_REG 4309
DIS_XFER ** 19 PTCR 4266
DIS_XFER ** 19 STCR 4250
DLECN0 3 0-35 DL_HARDWARE_ERR_10 917
DLECN1 4 0-35 DL_HARDWARE_ERR_10 918
DLECN2 5 0-35 DL_HARDWARE_ERR_10 919
DLECN3 6 0-35 DL_HARDWARE_ERR_10 920
DLECNI 1 0-35 DL_HARDWARE_ERR_10 915
DLEDT1 7 0-35 DL_HARDWARE_ERR_10 921
DLEDTI 2 0-35 DL_HARDWARE_ERR_10 916
DLEPGM 8 0-35 DL_HARDWARE_ERR_10 922
DLEPRT 0 0-35 DL_HARDWARE_ERR_10 914
DLESTS 9 0-35 DL_HARDWARE_ERR_10 923
DM_AL 16 0-35 DX20_MASSBUS_REG 3659
DM_AS 4 0-35 DX20_MASSBUS_REG 3647
DM_AY 11 0-35 DX20_MASSBUS_REG 3654
DM_BW 19 0-35 DX20_MASSBUS_REG 3662
DM_CR 0 0-35 DX20_MASSBUS_REG 3643
DM_DN 8 0-35 DX20_MASSBUS_REG 3651
DM_DT 6 0-35 DX20_MASSBUS_REG 3649
DM_E0 12 0-35 DX20_MASSBUS_REG 3655
DM_E1 13 0-35 DX20_MASSBUS_REG 3656
DM_ER 2 0-35 DX20_MASSBUS_REG 3645
DM_ES 9 0-35 DX20_MASSBUS_REG 3652
DM_FP 18 0-35 DX20_MASSBUS_REG 3661
DM_IB 20 0-35 DX20_MASSBUS_REG 3663
DM_IR 14 0-35 DX20_MASSBUS_REG 3657
DM_MA 21 0-35 DX20_MASSBUS_REG 3664
DM_MR 3 0-35 DX20_MASSBUS_REG 3646
DM_PC 15 0-35 DX20_MASSBUS_REG 3658
DM_SB 5 0-35 DX20_MASSBUS_REG 3648
DM_SD 17 0-35 DX20_MASSBUS_REG 3660
DM_SI 7 0-35 DX20_MASSBUS_REG 3650
DM_SR 1 0-35 DX20_MASSBUS_REG 3644
DM_TE 10 0-35 DX20_MASSBUS_REG 3653
DRADR ** 2-0 CASSTA 3090
DRIVE_AVAIL ** 12 RMCS1 4634
DRIVE_EXC ** 19 CONI_STATUS 4235
DRIVE_PRES ** 8 DS 4420
DRIVE_PRES ** 8 RMDS 4652
DRIVE_READY ** 7 DS 4421
DRIVE_READY ** 7 RMDS 4653
DRIVE_REQ ** 11 DT 4489
DRIVE_REQ ** 11 RMDT 4719
DRIVE_TYPE ** 8-0 DT 4491
DRIVE_TYPE ** 8-0 RMDT 4720
DRMBPE ** 06 WMCERR 3333
DRRDPE ** 03 WMCERR 3326
DR_NO_WR_CLK ** 07 WMCERR 3336
DR_REG 17 0-35 CSB_DX10 2033
DR_RE_ERROR ** 23 CONI_STATUS 4231
DR_T_ERROR ** 12 ER1 4436
DR_T_ERROR ** 12 RMER1 4663
DSCBPT 0 0-35 DSCSBP 3578
DSCBRC 8 0-35 DSCSBP 3597
DSCBWC 9 0-35 DSCSBP 3598
DSCDRC 10 0-35 DSCSBP 3599
DSCDWC 11 0-35 DSCSBP 3600
DSCHCT 3 0-35 DSCSBP 3582
DSCHID 2 0-35 DSCSBP 3581
DSCICT 14 0-35 DSCSBP 3603
DSCMCT 7 0-35 DSCSBP 3593
DSCMRC 12 0-35 DSCSBP 3601
DSCMSC 16 0-35 DSCSBP 3605
DSCMWC 13 0-35 DSCSBP 3602
DSCOCT 15 0-35 DSCSBP 3604
DSCPCT 5 0-35 DSCSBP 3586
DSCSBP 0 MAIN DISK_STATS_10 903
DSCSCT 4 0-35 DSCSBP 3584
DSCUSC 17 0-35 DSCSBP 3606
DSE_MIA ** 00 MIAA_STAT 3395
DSE_TUX ** 00 TUX 3509
DSR_ATTN ** 28 DX10_DSR 2046
DSR_BUSY ** 31 DX10_DSR 2049
DSR_CHAN_END ** 32 DX10_DSR 2050
DSR_CU_END ** 30 DX10_DSR 2048
DSR_DEV_END ** 33 DX10_DSR 2051
DSR_STAT_MOD ** 29 DX10_DSR 2047
DSR_UNIT_CHK ** 34 DX10_DSR 2052
DSR_UNIT_EXCEPT ** 35 DX10_DSR 2053
DST_CAS_1 1 0-17 TM78_CAS_REGS 2154
DST_CAS_1 1 18-35 TM78_CAS_REGS 2154
DTE_BLOCK_0 0 BODY DTE_CONTROL_BLOCK 3615
DTE_BLOCK_1 8 BODY DTE_CONTROL_BLOCK 3616
DTE_BLOCK_2 16 BODY DTE_CONTROL_BLOCK 3617
DTE_BLOCK_3 24 BODY DTE_CONTROL_BLOCK 3618
DTE_CONTROL_BLOCK 54 BODY KL_CPU_STATUS_10 1153
DTE_CONTROL_BLOCK 54 BODY KL_CPU_STATUS_20 1669
DTE_INT_INSTRUCTION 2 0-35 DTE_BLOCK 3625
DTR_CAS_6 6 0-17 TM78_CAS_REGS 2180
DTR_CAS_6 6 18-35 TM78_CAS_REGS 2180
DT_CB0 13 0-35 DX20_DEVICE_REG 3688
DT_CB1 14 0-35 DX20_DEVICE_REG 3689
DT_DP0 15 0-35 DX20_DEVICE_REG 3690
DT_DP1 16 0-35 DX20_DEVICE_REG 3691
DT_DP2 17 0-35 DX20_DEVICE_REG 3692
DT_DP3 18 0-35 DX20_DEVICE_REG 3693
DT_LAS 19 0-35 DX20_DEVICE_REG 3694
DT_MCV 6 0-35 DX20_DEVICE_REG 3681
DT_MRA 7 0-35 DX20_DEVICE_REG 3682
DT_MRB 8 0-35 DX20_DEVICE_REG 3683
DT_MRC 9 0-35 DX20_DEVICE_REG 3684
DT_MRD 10 0-35 DX20_DEVICE_REG 3685
DT_MRE 11 0-35 DX20_DEVICE_REG 3686
DT_MRF 12 0-35 DX20_DEVICE_REG 3687
DT_SBA 0 0-35 DX20_DEVICE_REG 3675
DT_SBB 1 0-35 DX20_DEVICE_REG 3676
DT_SBC 2 0-35 DX20_DEVICE_REG 3677
DT_SBD 3 0-35 DX20_DEVICE_REG 3678
DT_SBE 4 0-35 DX20_DEVICE_REG 3679
DT_SBF 5 0-35 DX20_DEVICE_REG 3680
DX10_BC_OF 12 0 CSB_DX10 2026
DX10_BYTE_CTR 12 1-13 CSB_DX10 2027
DX10_CPC 12 14-35 CSB_DX10 2028
DX10_CSR 11 8-19 CSB_DX10 2022
DX10_DAR 11 28-35 CSB_DX10 2024
DX10_DSR 11 0-7 CSB_DX10 2021
DX10_LAST_REC 13 12-35 CSB_DX10 2029
DX10_MEM_PAR ** 27 CONI 2040
DX10_MP_ERR ** 26 CONI 2039
DX10_NXM ** 28 CONI 2041
DX10_SEQ_ERR 11 22-27 CSB_DX10 2023
DX20_DEVICE_REG 36 MAIN DX20_ERR_10 601
DX20_DEVICE_REG 41 MAIN MASSBUS_ERR_20 1443
DX20_MASSBUS_REG 35 MAIN DX20_ERR_10 599
DX20_MASSBUS_REG 40 MAIN MASSBUS_ERR_20 1441
DX_CBUS_PE ** 3 DM_ER 4817
DX_DBUF_PE ** 4 DM_ER 4816
DX_ILL_FUNCT ** 0 DM_ER 4820
DX_ILL_REG ** 1 DM_ER 4819
DX_MP_ERROR ** 7 DM_ER 4813
DX_MP_STOP ** 6 DM_ER 4814
DX_REG_MOD ** 2 DM_ER 4818
DX_UBUS_PE ** 5 DM_ER 4815
DX_VER 39 18-35 MASSBUS_ERR_20 1440
ECCOR 4 10-17 TM78_SENSE_BYTES 2452
ECCSTA 4 2-9 TM78_SENSE_BYTES 2453
ECC_CORR 4 1 MASSBUS_ERR_20 1377
ECC_ENV ** 6 MR 4457
ECC_ERROR ** 6 ER1 4442
ECC_ERROR ** 6 RMER1 4669
ECC_ERR_LOC ** 12-0 ECC1 4614
ECC_ERR_MASK ** 10-0 ECC2 4619
ECC_INH ** 11 OF 4509
ECC_INH ** 11 RMOF 4736
ECC_PATTERN ** 10-0 RMECC2 4775
ECC_POSITION ** 12-0 RMECC1 4770
ECC_WMC_DRBUS ** 04 WMCSTA 3159
ECODE_2 ** 7 - ERR2_CNT 3296
ENABLED_COUNT 10 0-35 OLD_CPU_NXM_ERR_10 280
ENABLE_24_31 ** 6-13 APR_STATUS 3961
ENAON 14 20-27 TM78_SENSE_BYTES 2495
ENB_ECC ** 4 RMMR1 4691
ENB_SERCH ** 11 RMMR1 4684
END_0 ** 0 REND 2790
END_1 ** 1 REND 2791
END_2 ** 2 REND 2792
END_3 ** 3 REND 2793
END_4 ** 4 REND 2794
END_5 ** 5 REND 2795
END_6 ** 6 REND 2796
END_7 ** 7 REND 2797
END_BLOCK ** 13 RMMR1 4682
END_P ** 04 RPSTA 2809
ENTRY_DATE_TIME 1 0-35 HEADER 148
ENTRY_LENGTH 0 27-35 HEADER 147
ENTRY_TYPE 0 0-8 HEADER 136
EOT_DET ** 04 TUDIAG 3473
EOT_TU ** 01 TUSTAT 3376
EPT_PAGE ** 23-35 PAGE_STATUS 4018
ER$DHG 1 12 FE_RELOAD_20 1549
ER$ENF 1 13 FE_RELOAD_20 1550
ER$OPE 1 14 FE_RELOAD_20 1551
ER$OUF 1 15 FE_RELOAD_20 1552
ER$TT1 1 16 FE_RELOAD_20 1553
ERR ** 05 WMCERR 3331
ERR1_CNT 10 28-35 TM78_SENSE_BYTES 2478
ERR2_CNT 10 20-27 TM78_SENSE_BYTES 2479
ERROR ** 14 DS 4414
ERROR ** 14 RMDS 4646
ERROR_ADDRESS 5 0-35 MONITOR_BUG_DATA_20 1334
ERROR_LOG 0 BODY SYS_ERROR_LOG_10 673
ERROR_LOG 0 BODY SYS_ERROR_LOG_20 1516
ERR_CODE ** 7-0 ERR1_CNT 3277
ERR_LOCATION 3 0-35 DX20_ERR_10 554
ERR_LOCATION 3 0-35 MASSBUS_ERR_20 1372
ERR_RECORD 22 0-35 DX20_ERR_10 585
ERR_RECORD 24 0-35 MASSBUS_ERR_20 1415
EVENT_CLASS ** 14-6 EVENT_CODE 4837
EVENT_CODE 0 0-35 SOFTWARE_EVENT_10 612
EVENT_TYPE ** 4-0 EVENT_CODE 4838
EVEN_PAR_CHK ** 29 DCR 4297
EXAMINE_PROTECT 4 0-35 DTE_BLOCK 3627
EXPECTED_TERMINATION 12 0-35 CHANNEL_ERROR_REPORT_10 396
EXT_FIELD ** 5-4 LA 4497
FAIL_CODE ** 7 - FALCOD 2516
FALCOD 0 28-35 TM78_SENSE_BYTES 2438
FEATURE_REG 3 0-35 CSB_DX10 1996
FERFNM 2 MAIN$Z FE_RELOAD_10 807
FERNUM 0 0-35 FE_RELOAD_10 787
FERSIZ 3 0-35 FE_RELOAD_10 808
FERSTS 1 0-35 FE_RELOAD_10 790
FE_DATA 0 BODY FE_DEVICE_ERR_10 778
FE_DATA 0 BODY FE_DEVICE_ERR_20 1525
FE_LENGTH 7 0-35 FE_DATA 3735
FE_OFFSET 5 18-35 FE_DATA 3732
FE_SUB 5 MAIN FE_DATA 3731
FE_VERSION 2 0-35 FE_DATA 3724
FIELD_COUNT ** 5-0 DATA_TYPE 4876
FIELD_TYPE ** 6 DATA_TYPE 4865
FILE ** 1 SINK_FLAGS 4830
FILE_IN_ERROR 2 0-35 TAPE_ERR_10 721
FILE_IN_ERROR 3 0-17 DX20_ERR_10 556
FILE_IN_ERROR 3 0-17 MASSBUS_ERR_20 1373
FILE_NAME 3 MAIN$Z NODE_DOWN_LINE_DUMP 1741
FILE_NAME 3 MAIN$Z NODE_DOWN_LINE_LOAD 1706
FILE_NAME 10 0-35 DX20_ERR_10 569
FILE_NAME 10 0-35 MASSBUS_ERR_10 514
FILE_NAME 10 0-35 MASSBUS_ERR_20 1393
FILE_NAME_EXT 11 18-35 MASSBUS_ERR_10 516
FILE_POSITION 21 0-35 DX20_ERR_10 584
FILE_POSITION 23 0-35 MASSBUS_ERR_20 1413
FINAL_ERR_STATE 4 0-35 DX20_ERR_10 558
FINAL_ERR_STATE 4 0-35 MASSBUS_ERR_10 493
FINAL_ERR_STATE 4 0-35 MASSBUS_ERR_20 1375
FINAL_ERR_STATUS 7 0-35 TAPE_ERR_10 750
FIRST_ADDRESS 3 0-35 NXM_MEMORY_SWEEP_10 1028
FIRST_ADDRESS 4 0-35 PAR_MEMORY_SWEEP_10 1050
FIRST_ADDRESS 5 0-35 OLD_CPU_NXM_ERR_10 275
FIRST_ADDRESS 6 0-35 CPU_PAR_INT_10 1120
FIRST_ADDRESS 6 0-35 OLD_CPU_MEM_PAR_ERR_10 257
FIRST_CONTENTS 3 0-35 PAR_MEMORY_SWEEP_10 1049
FIRST_CONTENTS 5 0-35 CPU_PAR_INT_10 1119
FIRST_CONTENTS 5 0-35 OLD_CPU_MEM_PAR_ERR_10 256
FMT22 ** 12 OF 4508
FMT_16 ** 12 RMOF 4735
FMT_ERROR ** 4 ER1 4444
FMT_ERROR ** 4 RMER1 4671
FORK_NUMBER 0 0-17 FE_DATA 3721
FORK_NUMBER 4 0-17 CPU_PAR_TRAP_20 1586
FORK_NUMBER 6 0-17 MONITOR_BUG_DATA_20 1335
FORMAT_ERR 4 6 MASSBUS_ERR_20 1383
FPT_TU ** 00 TUSTAT 3375
FRAMES_READ 8 0-35 DX20_ERR_10 567
FRAMES_READ 8 0-35 MASSBUS_ERR_20 1390
FRAMES_WRITTEN 9 0-35 DX20_ERR_10 568
FRAMES_WRITTEN 9 0-35 MASSBUS_ERR_20 1392
FRAME_IN_ERR 5 0-35 TAPE_ERR_10 743
FUNCTION ** 5-0 RMCS1 4639
FUNCTION_CODE ** 30-35 PTCR 4268
FUNCTION_CODE ** 30-35 STCR 4252
FUNCTION_WORD 4 0-35 NET_HARDWARE_ERR 1754
FUNCT_CODE 1 0-7 DECNET_PHASE_III 1803
FUNC_CODE1 ** 05-01 NC2_CAS_15 2385
FWD ** 06 MIAA_STAT 3407
GO ** 0 RMCS1 4640
GOOD_WORD 2 0-35 CPU_PAR_TRAP_10 1089
GOOD_WORD 2 0-35 CPU_PAR_TRAP_20 1584
GOOD_WORD 8 0-35 KL_OR_KS_PAR_TRAP_10 1002
HARD 4 0 MASSBUS_ERR_20 1376
HARD 4 1 MASSBUS_ERR_10 494
HARD 4 1 TAPE_ERR_10 728
HARD_POS_ERR 31 0-35 DX20_ERR_10 594
HARD_POS_ERR 36 0-35 MASSBUS_ERR_20 1433
HARD_READ 19 0-35 DX20_ERR_10 582
HARD_READ 21 0-35 MASSBUS_ERR_20 1410
HARD_READ_ERRORS 5 0-35 OLD_TAPE_STATS_10 870
HARD_WRITE 20 0-35 DX20_ERR_10 583
HARD_WRITE 22 0-35 MASSBUS_ERR_20 1411
HARD_WRITE_ERRORS 7 0-35 OLD_TAPE_STATS_10 872
HCCCTL 1 0-5 HARD_COPY_ERR_10 1266
HCCDEV 1 6-11 HARD_COPY_ERR_10 1272
HCCNAM 0 0-35 HARD_COPY_ERR_10 1264
HCCPGM 3 0-35 HARD_COPY_ERR_10 1281
HCCSBP 4 0-35 HARD_COPY_ERR_10 1282
HCCTYP 1 0-35 HARD_COPY_ERR_10 1265
HCCUID 2 0-35 HARD_COPY_ERR_10 1280
HCRC_ERROR ** 8 ER1 4440
HDECCT 18 0-35 OLD_DISK_ERR_10 455
HDEDCR 16 0-35 OLD_DISK_ERR_10 442
HDEECT 4 0-35 OLD_DISK_ERR_10 419
HDEERR 6 0-35 OLD_DISK_ERR_10 425
HDEEXT 20 0-35 OLD_DISK_ERR_10 458
HDEFIL 19 0-35 OLD_DISK_ERR_10 457
HDEHBN 9 0-35 OLD_DISK_ERR_10 428
HDEHCT 2 0-35 OLD_DISK_ERR_10 417
HDEHDI 8 0-35 OLD_DISK_ERR_10 427
HDEHID 1 0-35 OLD_DISK_ERR_10 416
HDEHNG 12 0-35 OLD_DISK_ERR_10 434
HDELOG 17 0-35 OLD_DISK_ERR_10 454
HDEMCT 10 0-35 OLD_DISK_ERR_10 429
HDENAM 0 0-35 OLD_DISK_ERR_10 415
HDEPCT 11 0-35 OLD_DISK_ERR_10 433
HDEPGM 22 0-35 OLD_DISK_ERR_10 460
HDESCT 3 0-35 OLD_DISK_ERR_10 418
HDESDI 7 0-35 OLD_DISK_ERR_10 426
HDESOF 5 0-35 OLD_DISK_ERR_10 423
HDETRC 13 0-35 OLD_DISK_ERR_10 439
HDETSC 15 0-35 OLD_DISK_ERR_10 441
HDETWC 14 0-35 OLD_DISK_ERR_10 440
HDEUID 21 0-35 OLD_DISK_ERR_10 459
HDR_ERR 4 3 MASSBUS_ERR_20 1379
HDR_FORMAT 0 21-23 HEADER 143
HDR_LENGTH 0 24-26 HEADER 145
HDR_WRD_0 0 0-35 HEADER 135
HDWR_OPTION_TYPE 4 28-35 NET_HARDWARE_ERR 1758
HEAD_TAG ** 10 RMMR2 4753
HIGH_ADDRESS 0 0-35 PAR_SWEEP_DATA 3846
HI_CT_DET ** 10 MR 4453
HSBCBP 3 0-35 KS_HALT_STATUS_10 821
HSBCOD 0 0-35 KS_HALT_STATUS_10 817
HSBEPC 1 0-35 KS_HALT_STATUS_10 818
HS_AR 3 0-35 KS_HS_BLOCK 3761
HS_ARX 4 0-35 KS_HS_BLOCK 3762
HS_BR 5 0-35 KS_HS_BLOCK 3763
HS_BRX 6 0-35 KS_HS_BLOCK 3764
HS_EBR 10 0-35 KS_HS_BLOCK 3766
HS_FLG 13 0-35 KS_HS_BLOCK 3769
HS_HPC 1 0-35 KS_HALT_STATUS_20 1567
HS_HR 2 0-35 KS_HS_BLOCK 3760
HS_MAG 0 0-35 KS_HS_BLOCK 3758
HS_MSK 12 0-35 KS_HS_BLOCK 3768
HS_ONE 7 0-35 KS_HS_BLOCK 3765
HS_PC 1 0-35 KS_HS_BLOCK 3759
HS_PI 14 0-35 KS_HS_BLOCK 3770
HS_T0 16 0-35 KS_HS_BLOCK 3772
HS_T1 17 0-35 KS_HS_BLOCK 3773
HS_UBR 11 0-35 KS_HS_BLOCK 3767
HS_VMA 20 0-35 KS_HS_BLOCK 3774
HS_X1 15 0-35 KS_HS_BLOCK 3771
HUNG_DEVICE 4 2 MASSBUS_ERR_10 496
H_COM_ERROR ** 7 ER1 4441
H_COM_ERROR ** 7 RMER1 4668
H_COM_INH ** 10 OF 4510
H_COM_INH ** 10 RMOF 4737
H_CRC_ERROR ** 8 RMER1 4667
ICR 38 0-35 MASSBUS_ERR_20 1435
ILLEGAL_P ** 02 RPSTA 2807
ILL_0 ** 0 RILL 2743
ILL_1 ** 1 RILL 2755
ILL_2 ** 2 RILL 2756
ILL_3 ** 3 RILL 2757
ILL_4 ** 4 RILL 2758
ILL_5 ** 5 RILL 2759
ILL_6 ** 6 RILL 2760
ILL_7 ** 7 RILL 2761
ILL_FUNCT ** 0 ER1 4448
ILL_FUNCT ** 0 RMER1 4675
ILL_REG ** 1 ER1 4447
ILL_REG ** 1 RMER1 4674
ILR_CAS ** 04 CASSTA 3095
INDEX_ERROR ** 11 ER2 4537
INITIAL_CONTROL_WORD 4 0-35 CHANNEL_ERROR_REPORT_10 388
INIT_CHN_COMMAND 0 0-35 CHN_LOGOUT 1951
INIT_CNTRL_REG 33 0-35 DX20_ERR_10 596
INIT_CNTRL_REG 38 0-35 MASSBUS_ERR_20 1436
INTCOD 0 2-9 TM78_SENSE_BYTES 2437
INTR_ENAB ** 6 RMCS1 4638
INTSTA 11 20-27 TM78_SENSE_BYTES 2483
INT_CODE ** 7 - INTCOD 2509
INT_REQ ** 32 APR_STATUS 3972
INVLD_CMD ** 12 RMER2 4761
IN_READY ** 6 RH11_RMCS2 4364
IORB_STATUS 18 0-35 MASSBUS_ERR_20 1406
IO_PAGE_FAIL ** 26 APR_STATUS 3966
I_ADR_ERROR ** 10 ER1 4438
I_ADR_ERROR ** 10 RMER1 4665
JOB_AFFECTED_COUNT 4 0-35 OLD_CPU_NXM_ERR_10 274
JOB_NUMBER 0 0-17 ERROR_LOG 3707
JOB_NUMBER 0 18-35 FE_DATA 3722
JOB_NUMBER 1 0-35 SOFTWARE_EVENT_10 613
JOB_NUMBER 4 18-35 CPU_PAR_TRAP_20 1587
JOB_NUMBER 6 0-35 MONITOR_BUG_DATA_20 1336
JOB_NUMBER 10 0-35 MONITOR_BUG_DATA_10 234
JOB_STOP_TALLY 14 0-35 MONITOR_BUG_DATA_10 238
KAEADR 17 0-35 KL_ADDRESS_FAIL_10 1234
KAEADR 17 0-35 OLD_KL_ADDRESS_FAIL_10 1201
KAEAFT 16 0-35 KL_ADDRESS_FAIL_10 1232
KAEAFT 16 0-35 OLD_KL_ADDRESS_FAIL_10 1200
KAEBEF 15 0-35 KL_ADDRESS_FAIL_10 1230
KAEBEF 15 0-35 OLD_KL_ADDRESS_FAIL_10 1199
KAECNI 20 0-35 KL_ADDRESS_FAIL_10 1238
KAECNI 20 0-35 OLD_KL_ADDRESS_FAIL_10 1204
KAEERA 21 0-35 KL_ADDRESS_FAIL_10 1239
KAEERA 21 0-35 OLD_KL_ADDRESS_FAIL_10 1205
KAEKPG 14 0-35 KL_ADDRESS_FAIL_10 1229
KAEKPG 14 0-35 OLD_KL_ADDRESS_FAIL_10 1198
KAELNA 6 0-35 KL_ADDRESS_FAIL_10 1221
KAELNA 6 0-35 OLD_KL_ADDRESS_FAIL_10 1190
KAEMNA 5 0-35 KL_ADDRESS_FAIL_10 1220
KAEMNA 5 0-35 OLD_KL_ADDRESS_FAIL_10 1189
KAEMNR 7 0-35 KL_ADDRESS_FAIL_10 1222
KAEMNR 7 0-35 OLD_KL_ADDRESS_FAIL_10 1191
KAEMPP 3 0-35 KL_ADDRESS_FAIL_10 1218
KAEMPP 3 0-35 OLD_KL_ADDRESS_FAIL_10 1187
KAENAA 11 0-35 KL_ADDRESS_FAIL_10 1226
KAENAA 11 0-35 OLD_KL_ADDRESS_FAIL_10 1195
KAENAM 0 0-35 KL_ADDRESS_FAIL_10 1215
KAENAM 0 0-35 OLD_KL_ADDRESS_FAIL_10 1184
KAENCS 13 0-35 KL_ADDRESS_FAIL_10 1228
KAENCS 13 0-35 OLD_KL_ADDRESS_FAIL_10 1197
KAENJA 4 0-35 KL_ADDRESS_FAIL_10 1219
KAENJA 4 0-35 OLD_KL_ADDRESS_FAIL_10 1188
KAENOA 12 0-35 KL_ADDRESS_FAIL_10 1227
KAENOA 12 0-35 OLD_KL_ADDRESS_FAIL_10 1196
KAENSC 9 0-35 KL_ADDRESS_FAIL_10 1224
KAENSC 9 0-35 OLD_KL_ADDRESS_FAIL_10 1193
KAENTS 8 0-35 KL_ADDRESS_FAIL_10 1223
KAENTS 8 0-35 OLD_KL_ADDRESS_FAIL_10 1192
KAEPGM 19 0-35 KL_ADDRESS_FAIL_10 1237
KAEPGM 19 0-35 OLD_KL_ADDRESS_FAIL_10 1203
KAEPPN 18 0-35 KL_ADDRESS_FAIL_10 1236
KAEPPN 18 0-35 OLD_KL_ADDRESS_FAIL_10 1202
KAESBD 22 0-35 KL_ADDRESS_FAIL_10 1240
KAESBD 22 0-35 OLD_KL_ADDRESS_FAIL_10 1206
KAESNE 2 0-35 KL_ADDRESS_FAIL_10 1217
KAESNE 2 0-35 OLD_KL_ADDRESS_FAIL_10 1186
KAETNE 1 0-35 KL_ADDRESS_FAIL_10 1216
KAETNE 1 0-35 OLD_KL_ADDRESS_FAIL_10 1185
KAEUEN 10 0-35 KL_ADDRESS_FAIL_10 1225
KAEUEN 10 0-35 OLD_KL_ADDRESS_FAIL_10 1194
KDICNI 11 0-35 OLD_CPU_PAR_INT_10 1073
KDIERA 12 0-35 OLD_CPU_PAR_INT_10 1074
KDIMPA 6 0-35 OLD_CPU_PAR_INT_10 1068
KDIMPC 3 0-35 OLD_CPU_PAR_INT_10 1065
KDIMPP 4 0-35 OLD_CPU_PAR_INT_10 1066
KDIMPT 8 0-35 OLD_CPU_PAR_INT_10 1070
KDIMPW 5 0-35 OLD_CPU_PAR_INT_10 1067
KDINAM 0 0-35 OLD_CPU_PAR_INT_10 1062
KDIPAR 7 0-35 OLD_CPU_PAR_INT_10 1069
KDIPGM 10 0-35 OLD_CPU_PAR_INT_10 1072
KDIPPN 9 0-35 OLD_CPU_PAR_INT_10 1071
KDISBD 13 0-35 OLD_CPU_PAR_INT_10 1075
KDISPE 2 0-35 OLD_CPU_PAR_INT_10 1064
KDITPE 1 0-35 OLD_CPU_PAR_INT_10 1063
KEYPAD_FLAG ** 7 - ENAON 3567
KIIAPR 2 0-35 KI_PAR_NXM_INT_10 939
KIINAM 0 0-35 KI_PAR_NXM_INT_10 937
KIIPCI 1 0-35 KI_PAR_NXM_INT_10 938
KIIPGM 5 0-35 KI_PAR_NXM_INT_10 942
KIIPII 3 0-35 KI_PAR_NXM_INT_10 940
KIIPPN 4 0-35 KI_PAR_NXM_INT_10 941
KL10_PAGED ** 21 PAGE_STATUS 4016
KLER_BLOCK 0 16-31 FE_SUB 3748
KLER_BLOCK_CNT 1 0-15 FE_SUB 3749
KLER_FIRST_WORD 1 16-31 FE_SUB 3750
KON_NUMBER 5 0-17 USAGE_DATA_20 1477
KON_NUMBER 34 0-17 MASSBUS_ERR_20 1428
KSNBDW 4 0-35 KS_NXM_TRAP_10 972
KSNGDW 8 0-35 KS_NXM_TRAP_10 976
KSNNAM 0 0-35 KS_NXM_TRAP_10 968
KSNNNT 11 0-35 KS_NXM_TRAP_10 982
KSNNRT 10 0-35 KS_NXM_TRAP_10 981
KSNPCT 1 0-35 KS_NXM_TRAP_10 969
KSNPFW 2 0-35 KS_NXM_TRAP_10 970
KSNPGM 7 0-35 KS_NXM_TRAP_10 975
KSNPIT 5 0-35 KS_NXM_TRAP_10 973
KSNPMA 3 0-35 KS_NXM_TRAP_10 971
KSNPPN 6 0-35 KS_NXM_TRAP_10 974
KSNRET 9 0-35 KS_NXM_TRAP_10 977
KS_HS_BLOCK 2 BODY KS_HALT_STATUS_10 819
KS_HS_BLOCK 2 BODY KS_HALT_STATUS_20 1568
LAST_ADDRESS 4 0-35 NXM_MEMORY_SWEEP_10 1029
LAST_ADDRESS 4 0-35 OLD_CPU_NXM_ERR_10 276
LAST_BLOCK ** 10 RMDS 4650
LAST_CMD 34 18-35 MASSBUS_ERR_10 532
LAST_COMMAND 2 0-35 CHN_LOGOUT 1953
LAST_COMMAND 3 0-35 CSB_TM02 2094
LAST_COMMAND 5 0-35 CSB_TM78 2129
LAST_CW 8 0-35 CHANNEL_ERROR_REPORT_10 392
LAST_CW_MINUS_1 7 0-35 CHANNEL_ERROR_REPORT_10 391
LAST_CW_MINUS_2 6 0-35 CHANNEL_ERROR_REPORT_10 390
LAST_DATA 11 0-35 CHANNEL_ERROR_REPORT_10 395
LAST_DATA_MINUS_1 10 0-35 CHANNEL_ERROR_REPORT_10 394
LAST_DATA_MINUS_2 9 0-35 CHANNEL_ERROR_REPORT_10 393
LAST_MUUO 5 0-35 KL_CPU_STATUS_10 1145
LAST_MUUO 6 0-35 KL_CPU_STATUS_20 1662
LAST_MUUO_PC 6 0-35 KL_CPU_STATUS_10 1146
LAST_MUUO_PC 7 0-35 KL_CPU_STATUS_20 1663
LAST_REL_ADDRESS 1 0-35 PAR_SWEEP_DATA 3847
LAST_SECT ** 10 DS 4418
LAST_SECTR ** 2 RMMR1 4693
LAST_SWEEP_COUNT 2 0-35 PAR_SWEEP_DATA 3848
LAST_S_T ** 1 RMMR1 4694
LBN 3 0-35 MASSBUS_ERR_10 492
LBN 3 0-35 MASSBUS_ERR_20 1371
LEFT ** 02 CBUSSTA 3117
LINE_NUMBER 4 12-23 SOFTWARE_EVENT_10 618
LOAD_REG ** 6 PREP_REG 4308
LOG_TEXT 4 0-35 ERROR_LOG 3712
LONG_WCE ** 20 CONI_STATUS 4234
LOOK_SYNC ** 10 RMMR1 4685
LOSS_CHK ** 10 RMER2 4763
LOSS_CLK ** 11 RMER2 4762
LO_RD_TH ** 07 XFRCTL 3549
LPTCNI 1 0-35 LP100_ERR_10 1252
LPTNAM 0 0-35 LP100_ERR_10 1251
LPTTYP 3 0-35 LP100_ERR_10 1254
LPTWRD 2 0-35 LP100_ERR_10 1253
LWR ** 02 MIAA_STAT 3401
MAGFCC 6 0-35 OLD_TAPE_ERR_10 702
MAGFCS 7 0-35 OLD_TAPE_ERR_10 703
MAGFFB 2 0-35 OLD_TAPE_ERR_10 698
MAGICC 4 0-35 OLD_TAPE_ERR_10 700
MAGICS 5 0-35 OLD_TAPE_ERR_10 701
MAGMED 9 0-35 OLD_TAPE_ERR_10 706
MAGNAM 0 0-35 OLD_TAPE_ERR_10 696
MAGRFF 3 0-35 OLD_TAPE_ERR_10 699
MAGRID 1 0-35 OLD_TAPE_ERR_10 697
MAGRTC 8 0-35 OLD_TAPE_ERR_10 704
MAINT_CLOCK ** 1 MR 4462
MAINT_INDEX ** 2 MR 4461
MAINT_READ ** 4 MR 4459
MAINT_SCLK ** 3 MR 4460
MAINT_WRITE ** 5 MR 4458
MAN_TEST ** 07 MIAA_STAT 3411
MASSBUS_DATA ** 7 - DDR_A 3304
MASSBUS_DATA_B ** 7 - DDR_B 3314
MASTER_OSC ** 22 APR_STATUS 3963
MBATTN ** 07 CBUSSTA 3125
MBD ** 2-0 WMCERR 3325
MBDEM ** 05 CBUSSTA 3123
MBEBL ** 04 DBUSSTA 3137
MBEXC ** 03 DBUSSTA 3136
MBFAIL ** 03 CBUSSTA 3119
MBINIT ** 04 CBUSSTA 3122
MBOCC ** 05 DBUSSTA 3138
MBRUN ** 02 DBUSSTA 3135
MBSCLK ** 00 DBUSSTA 3133
MBSEL ** 07 INTSTA 3365
MBTRA ** 06 CBUSSTA 3124
MBUS_AIE ** 30 CONI_STATUS 4224
MBUS_ATTN ** 28 CONI_STATUS 4226
MBUS_DPE ** 8 RH11_RMCS2 4362
MBUS_ENAB ** 27 CONI_STATUS 4227
MBUS_ENAB ** 27 CONO 4319
MBWCLK ** 06 DBUSSTA 3139
MBWREN ** 07 DBUSSTA 3140
MB_AS 8 18-35 CSB_TM02 2104
MB_AS_END 4 0-17 MB_DEV 3795
MB_AS_ERR 4 18-35 MB_DEV 3796
MB_A_OUT ** 03 INTSTA 3355
MB_B_OUT ** 02 INTSTA 3354
MB_CC_END 11 0-17 MB_DEV 3815
MB_CC_ERR 11 18-35 MB_DEV 3816
MB_CHK_SUM 11 18-35 CSB_TM02 2110
MB_CHK_SUM_END 7 0-17 MB_DEV 3805
MB_CHK_SUM_ERR 7 18-35 MB_DEV 3806
MB_CR 4 18-35 CSB_TM02 2096
MB_CR_END 0 0-17 MB_DEV 3785
MB_CR_ERR 0 18-35 MB_DEV 3786
MB_DA_END 5 0-17 MB_DEV 3797
MB_DA_ERR 5 18-35 MB_DEV 3798
MB_DC_END 10 0-17 MB_DEV 3813
MB_DC_ERR 10 18-35 MB_DEV 3814
MB_DEVICE_REG 18 BODY MASSBUS_ERR_10 529
MB_DEV_TABLE 39 BODY MASSBUS_ERR_20 1437
MB_DS 5 18-35 CSB_TM02 2098
MB_DS_END 1 0-17 MB_DEV 3787
MB_DS_ERR 1 18-35 MB_DEV 3788
MB_DT 10 18-35 CSB_TM02 2108
MB_DT_END 6 0-17 MB_DEV 3801
MB_DT_ERR 6 18-35 MB_DEV 3802
MB_ECC1_END 14 0-17 MB_DEV 3821
MB_ECC1_ERR 14 18-35 MB_DEV 3822
MB_ECC2_END 15 0-17 MB_DEV 3823
MB_ECC2_ERR 15 18-35 MB_DEV 3824
MB_ER1_END 2 0-17 MB_DEV 3789
MB_ER1_ERR 2 18-35 MB_DEV 3790
MB_ER2_END 12 0-17 MB_DEV 3817
MB_ER2_ERR 12 18-35 MB_DEV 3818
MB_ER3_END 13 0-17 MB_DEV 3819
MB_ER3_ERR 13 18-35 MB_DEV 3820
MB_ERR 6 18-35 CSB_TM02 2100
MB_ERR_END 2 0-17 MB_DEV 3791
MB_ERR_ERR 2 18-35 MB_DEV 3792
MB_FR_CNT 9 18-35 CSB_TM02 2106
MB_FR_CNT_END 5 0-17 MB_DEV 3799
MB_FR_CNT_ERR 5 18-35 MB_DEV 3800
MB_LA_END 7 0-17 MB_DEV 3803
MB_LA_ERR 7 18-35 MB_DEV 3804
MB_MR 7 18-35 CSB_TM02 2102
MB_MR_END 3 0-17 MB_DEV 3793
MB_MR_ERR 3 18-35 MB_DEV 3794
MB_OF_END 9 0-17 MB_DEV 3809
MB_OF_ERR 9 18-35 MB_DEV 3810
MB_PAR ** 27 APR_STATUS 3967
MB_SN 12 18-35 CSB_TM02 2112
MB_SN_END 8 0-17 MB_DEV 3807
MB_SN_ERR 8 18-35 MB_DEV 3808
MB_TC 13 18-35 CSB_TM02 2114
MB_TC_END 9 0-17 MB_DEV 3811
MB_TC_ERR 9 18-35 MB_DEV 3812
MD 16 0-35 CSB_DX10 2032
MEDIAID 1 0-35 DX20_ERR_10 550
MEDIAID 1 0-35 MASSBUS_ERR_20 1368
MEDIAID 1 0-35 OLD_TAPE_STATS_10 866
MEDIAID 1 0-35 TAPE_ERR_10 718
MEM_PAR_ERRORS 1 0-35 CPU_PAR_INT_10 1115
MEM_PAR_ERRORS 4 0-35 CPU_PAR_INT_20 1632
MF_20_TEXT 0 0-35 MF_20_ERR_20 1686
MIAA_STAT 12 2-9 TM78_SENSE_BYTES 2485
MIAB_STAT 12 28-35 TM78_SENSE_BYTES 2486
MICRO_CODE_VER_NO 34 0-35 DX20_ERR_10 597
MISS_XFER ** 9 RH11_RMCS2 4361
MK2P ** 03 RPSTA 2808
MK2_0 ** 0 RMK2 2769
MK2_1 ** 1 RMK2 2776
MK2_2 ** 2 RMK2 2777
MK2_3 ** 3 RMK2 2778
MK2_4 ** 4 RMK2 2779
MK2_5 ** 5 RMK2 2780
MK2_6 ** 6 RMK2 2781
MK2_7 ** 7 RMK2 2782
MODE ** 0 PAGE_FAIL_WORD 3987
MOL ** 12 DS 4416
MOL ** 12 RMDS 4648
MONITOR ** 2 SINK_FLAGS 4829
MONITOR_VERSION 2 0-35 MONITOR_BUG_DATA_20 1324
MONITOR_VERSION 2 0-35 SYSTEM_RELOAD_20 1302
MONITOR_VERSION 8 0-35 MONITOR_BUG_DATA_10 231
MONITOR_VERSION 8 0-35 SYSTEM_RELOAD_10 207
MOT ** 01 MIAA_STAT 3400
MOVE_HEAD ** 13 DT 4488
MOVE_HEAD ** 13 RMDT 4718
MPA_CAS_20 16 0-17 TM78_CAS_REGS 2194
MPA_CAS_20 16 18-35 TM78_CAS_REGS 2194
MPD_CAS_21 17 0-17 TM78_CAS_REGS 2198
MPD_CAS_21 17 18-35 TM78_CAS_REGS 2198
MPD_CM_PE ** 13 MPD_CAS_21 2408
MPD_CPE ** 11 MPD_CAS_21 2412
MPD_EV_PAR ** 10 MPD_CAS_21 2415
MPD_HLDA ** 09 MPD_CAS_21 2418
MPD_HOLD ** 08 MPD_CAS_21 2421
MPD_ILR ** 12 MPD_CAS_21 2410
MPD_INT_DATA ** 07-00 MPD_CAS_21 2423
MPD_TM_CLR ** 14 MPD_CAS_21 2404
MPD_TM_RDY ** 15 MPD_CAS_21 2401
MPE_CNT 28 0-35 DX20_ERR_10 591
MPE_CNT 30 0-35 MASSBUS_ERR_20 1421
MR1 19 0-35 CSB_DX10 2035
MTOPR_FUNCTION 3 0-35 CONFIG_CHANGE_20 1502
MULTIPLE_FIELD ** 6 DATA_TYPE 4874
MULTI_H_SEL ** 9 ER2 4543
MUST_BE_ONES ** 0-2 PAGE_DATAI 3978
MUUO_CONTEXT_WORD 7 0-35 KL_CPU_STATUS_10 1147
MUUO_CONTEXT_WORD 8 0-35 KL_CPU_STATUS_20 1664
MUUO_RESERVED 5 0-35 KL_CPU_STATUS_20 1661
MUUO_RESERVED 8 0-35 KL_CPU_STATUS_10 1148
NC1_CAS_14 12 0-17 TM78_CAS_REGS 2186
NC1_CAS_14 12 18-35 TM78_CAS_REGS 2186
NC2_CAS_15 13 0-17 TM78_CAS_REGS 2191
NC2_CAS_15 13 18-35 TM78_CAS_REGS 2191
NC2_CMD_CNT1 ** 15-08 NC2_CAS_15 2384
NC3_CAS_16 14 0-17 TM78_CAS_REGS 2192
NC3_CAS_16 14 18-35 TM78_CAS_REGS 2192
NC3_FUNC_CODE2 ** 05-01 NC3_CAS_16 2390
NC4_CAS_17 15 0-17 TM78_CAS_REGS 2193
NC4_CAS_17 15 18-35 TM78_CAS_REGS 2193
NC4_CMD_CNT3 ** 15-08 NC4_CAS_17 2395
NC4_FUNC_CODE3 ** 05-01 NC4_CAS_17 2396
NDT ** 03 TUX 3512
NEG_BLK_CNT ** 20-29 PTCR 4267
NEG_BLK_CNT ** 20-29 STCR 4251
NEG_FUNCTION_COUNT 0 0-17 SBDIAG_LIST 3893
NETCON_VERSION 0 0-35 NETCON_START 1696
NODE_NAME 1 0-35 CONFIG_CHANGE_10 650
NODE_NAME 1 MAIN$Z NETCON_START 1697
NODE_NUMBER 0 0-35 CONFIG_CHANGE_10 645
NODE_NUMBER 4 0-11 SOFTWARE_EVENT_10 617
NON_RECOVERABLE 4 1 DX20_ERR_10 560
NON_X_DRIVE ** 12 RH11_RMCS2 4358
NOT_DONE_0 ** 0 RDON 2713
NOT_DONE_1 ** 1 RDON 2716
NOT_DONE_2 ** 2 RDON 2719
NOT_DONE_3 ** 3 RDON 2722
NOT_DONE_4 ** 4 RDON 2725
NOT_DONE_5 ** 5 RDON 2728
NOT_DONE_6 ** 6 RDON 2731
NOT_DONE_7 ** 7 RDON 2734
NOT_DONE_P ** 01 RPSTA 2806
NOT_KL_FLAG 9 0 KL_OR_KS_PAR_TRAP_10 1003
NOT_RECOVERED_COUNT 6 0-35 CPU_PAR_TRAP_10 1101
NOT_RECOVERED_COUNT 11 0-35 KL_OR_KS_PAR_TRAP_10 1013
NOT_RECOVERED_FLAG 4 1 CPU_PAR_TRAP_10 1092
NOT_RECOVERED_FLAG 7 1 CPU_PAR_TRAP_20 1591
NOT_RECOVERED_FLAG 9 1 KL_OR_KS_PAR_TRAP_10 1004
NOT_WR ** 06 TUDIAG 3475
NO_BLK_ADR ** 15 DT 4486
NO_FRAMES_READ 2 0-35 OLD_TAPE_STATS_10 867
NO_FRAMES_WRITTEN 3 0-35 OLD_TAPE_STATS_10 868
NO_H_SEL ** 10 ER2 4540
NST_CAS_13 11 0-17 TM78_CAS_REGS 2185
NST_CAS_13 11 18-35 TM78_CAS_REGS 2185
NTHUNG_CNT 6 0-8 DSCSBP 3589
NTHUNG_CNT 9 0-8 MASSBUS_ERR_10 510
NUMBER_IO_INSTR 0 0-17 DEVICE_STATUS_10 1171
NUMBER_OF_RESULTS 1 0-17 DEVICE_STATUS_10 1173
NXM ** 11 RH11_RMCS2 4359
NXM_CNT 29 0-35 DX20_ERR_10 592
NXM_CNT 31 0-35 MASSBUS_ERR_20 1422
NXM_OVRN_COUNT 1 0-35 CHANNEL_ERROR_REPORT_10 385
NXM_TAB 13 HEAD SYSTEM_RELOAD_10 217
NXM_TAB_AFTER 1 HEAD CONFIG_CHANGE_10 647
NXM_TAB_AFTER_ERR 14 HEAD NXM_MEMORY_SWEEP_10 1040
NXM_TAB_AFTER_ERR 16 HEAD OLD_CPU_NXM_ERR_10 288
NXM_TAB_BEFORE 0 HEAD CONFIG_CHANGE_10 642
NXM_TAB_BEFORE_ERR 13 HEAD NXM_MEMORY_SWEEP_10 1039
NXM_TAB_BEFORE_ERR 15 HEAD OLD_CPU_NXM_ERR_10 287
NXM_WORD 0 0-35 NXM_TAB 3833
OCCUP ** 15 RMMR1 4680
OFFSET ** 7-0 OF 4511
OFFSET_DIRTN ** 7 RMOF 4738
OFF_CYL ** 15 ER3 4572
OFSET_MODE ** 0 RMDS 4655
ONL ** 05 TUSTAT 3380
ONLINE ** 00 CBUSSTA 3113
OPERATOR_COMMENTS 11 0-35 SYSTEM_RELOAD_10 213
OPER_INC ** 13 ER1 4435
OPER_INC ** 13 RMER1 4662
OPER_PLUG ** 13 RMER2 4760
OPP ** 07 RET2_CNT 3501
OUTPUT_FORMAT ** 5-4 DATA_TYPE 4868
OUT_READY ** 7 RH11_RMCS2 4363
OVERRUN_ERR 32 0-35 DX20_ERR_10 595
OVERRUN_ERR 37 0-35 MASSBUS_ERR_20 1434
OVER_RUN ** 26 CONI_STATUS 4228
PACK_DATA ** 8 RMMR1 4687
PACK_HEADER ** 7 RMMR1 4688
PAD1_CNT 10 10-17 TM78_SENSE_BYTES 2476
PAD2_CNT 10 2-9 TM78_SENSE_BYTES 2477
PAD_CNT ** 7 - PAD1_CNT 3261
PAD_CNT ** 7 - PAD2_CNT 3269
PAGE_DATAI 3 0-35 KL_CPU_STATUS_10 1143
PAGE_DATAI 3 0-35 KL_CPU_STATUS_20 1659
PAGE_DATAI 37 0-35 MONITOR_BUG_DATA_20 1353
PAGE_FAIL_FLAGS 87 0-35 KL_CPU_STATUS_20 1671
PAGE_FAIL_NEW_PC 88 0-35 KL_CPU_STATUS_10 1156
PAGE_FAIL_NEW_PC 89 0-35 KL_CPU_STATUS_20 1673
PAGE_FAIL_OLD_PC 87 0-35 KL_CPU_STATUS_10 1155
PAGE_FAIL_OLD_PC 88 0-35 KL_CPU_STATUS_20 1672
PAGE_FAIL_WORD 0 0-35 CPU_PAR_TRAP_10 1087
PAGE_FAIL_WORD 0 0-35 CPU_PAR_TRAP_20 1582
PAGE_FAIL_WORD 2 0-35 KL_OR_KS_PAR_TRAP_10 996
PAGE_FAIL_WORD 86 0-35 KL_CPU_STATUS_10 1154
PAGE_FAIL_WORD 86 0-35 KL_CPU_STATUS_20 1670
PAGE_STATUS 4 0-35 KL_CPU_STATUS_10 1144
PAGE_STATUS 4 0-35 KL_CPU_STATUS_20 1660
PAGE_STATUS 36 0-35 MONITOR_BUG_DATA_20 1352
PARAMETER_COUNTER_FLAG ** 15 DATA_ID 4844
PARAMETER_TYPE ** 11-0 DATA_ID 4848
PARENT_HDWR_TYPE 4 10-17 NET_HARDWARE_ERR 1756
PARENT_SFWR_TYPE 4 20-27 NET_HARDWARE_ERR 1757
PAR_BIT ** 17 RR 4280
PAR_BIT ** 17 WR 4287
PAR_ERROR ** 3 ER1 4445
PAR_ERROR ** 3 RMER1 4672
PAR_SWEEP_DATA 5 HEAD PAR_MEMORY_SWEEP_10 1051
PAR_SWEEP_DATA 7 HEAD CPU_PAR_INT_10 1121
PAR_SWEEP_DATA 7 HEAD OLD_CPU_MEM_PAR_ERR_10 258
PAR_TEST ** 4 RH11_RMCS2 4366
PBAR 2 0-35 CSB_TM02 2091
PBAR 4 0-35 CSB_TM78 2128
PC_FLAGS 2 0-35 CPU_PAR_INT_20 1630
PEC ** 6 MIAB_STAT 3435
PEGCRTK ** 03 CH0TIE 2904
PEGCRTK ** 03 CH1TIE 2918
PEGCRTK ** 03 CH2TIE 2933
PEGCRTK ** 03 CH3TIE 2949
PEGCRTK ** 03 CH4TIE 2965
PEGCRTK ** 03 CH5TIE 2981
PEGCRTK ** 03 CH6TIE 2996
PEGCRTK ** 03 CH7TIE 3012
PEGCRTK ** 03 CHPTIE 3027
PES ** 03 TUSTAT 3378
PE_WR_PE ** 01 INTSTA 3351
PF_CODE ** 1-5 PAGE_FAIL_WORD 3999
PHTIE0 ** 01 CH0TIE 2902
PHTIE1 ** 01 CH1TIE 2916
PHTIE2 ** 01 CH2TIE 2931
PHTIE3 ** 01 CH3TIE 2947
PHTIE4 ** 01 CH4TIE 2963
PHTIE5 ** 01 CH5TIE 2979
PHTIE6 ** 01 CH6TIE 2994
PHTIE7 ** 01 CH7TIE 3010
PHTIEP ** 01 CHPTIE 3025
PHUNG_CNT 5 18-26 OLD_DISK_STATS_10 839
PHUNG_CNT 6 18-26 DSCSBP 3591
PHUNG_CNT 9 18-26 MASSBUS_ERR_10 512
PHYS_ADDRESS 3 0-35 CPU_PAR_TRAP_10 1090
PHYS_ADDRESS 3 0-35 KL_OR_KS_PAR_TRAP_10 997
PHYS_ADDRESS 6 0-35 CPU_PAR_TRAP_20 1589
PIA ** 33-35 CONI_STATUS 4221
PIA ** 33-35 CONO 4325
PIP ** 13 DS 4415
PIP ** 13 RMDS 4647
PI_AAD 4 0-35 OLD_CPU_PAR_INT_20 1610
PI_ADA 6 0-35 OLD_CPU_PAR_INT_20 1612
PI_ADD 22 0-35 OLD_CPU_PAR_INT_20 1615
PI_CDA 46 0-35 OLD_CPU_PAR_INT_20 1617
PI_CHANNELS_ON ** 29-35 PI_STATUS 4029
PI_CNI 0 0-35 OLD_CPU_PAR_INT_20 1606
PI_DAT 34 0-35 OLD_CPU_PAR_INT_20 1616
PI_ERA 1 0-35 OLD_CPU_PAR_INT_20 1607
PI_FPC 2 0-35 OLD_CPU_PAR_INT_20 1608
PI_IN_PROGRESS ** 21-27 PI_STATUS 4027
PI_LEVEL ** 33-35 APR_STATUS 3973
PI_OAD 5 0-35 OLD_CPU_PAR_INT_20 1611
PI_ODA 7 0-35 OLD_CPU_PAR_INT_20 1613
PI_REQUESTS ** 11-17 PI_STATUS 4023
PI_SBD 10 0-35 OLD_CPU_PAR_INT_20 1614
PI_STATUS 2 0-35 KL_CPU_STATUS_10 1142
PI_STATUS 2 0-35 KL_CPU_STATUS_20 1658
PI_STATUS 3 0-35 KL_PAR_NXM_INT_10 957
PI_STATUS 5 0-35 KL_OR_KS_PAR_TRAP_10 999
PI_STATUS 26 0-35 MONITOR_BUG_DATA_20 1342
PI_STATUS 32 0-35 MONITOR_BUG_DATA_10 242
PI_SWP 3 0-35 OLD_CPU_PAR_INT_20 1609
PI_SYS_ON ** 28 PI_STATUS 4028
PLO_BP ** 06 XFRCTL 3546
PLO_UNS ** 13 ER2 4531
PM ** 03 ECCSTA 2884
PORT ** 07 TUX 3520
PORTSEL_MIA ** 2-0 MIAB_STAT 3419
PORT_SEL ** 10 RMCS1 4635
POSITION_ERR 4 5 MASSBUS_ERR_20 1382
POST_0 ** 0 RPOSTN 2822
POST_1 ** 1 RPOSTN 2828
POST_2 ** 2 RPOSTN 2829
POST_3 ** 3 RPOSTN 2830
POST_4 ** 4 RPOSTN 2831
POST_5 ** 5 RPOSTN 2832
POST_6 ** 6 RPOSTN 2833
POST_7 ** 7 RPOSTN 2834
POST_P ** 05 RPSTA 2810
PPN 8 0-35 OLD_TAPE_STATS_10 873
PPN 10 0-35 TAPE_ERR_10 762
PRDD 7 28-35 TM78_SENSE_BYTES 2466
PREAMBLE_ERR ** 05 RPATH 2598
PRES_TUX ** 02 TUX 3511
PREV_BLOCK ** 9-11 PAGE_DATAI 3980
PREV_CONTEXT ** 13-17 PAGE_DATAI 3981
PRI_CFL ** 31 CONI_STATUS 4223
PROGRAM_COUNTER 1 0-35 KL_OR_KS_PAR_TRAP_10 995
PROGRAM_COUNTER 1 0-35 KL_PAR_NXM_INT_10 955
PROGRAM_COUNTER 3 0-35 CPU_PAR_INT_20 1631
PROGRAM_COUNTER 3 0-35 OLD_CPU_NXM_ERR_10 273
PROGRAM_COUNTER 4 0-35 CPU_PAR_INT_10 1118
PROGRAM_COUNTER 4 0-35 OLD_CPU_MEM_PAR_ERR_10 255
PROGRAM_COUNTER 7 0-35 CPU_PAR_TRAP_10 1102
PROGRAM_NAME 2 MAIN$Z NETCON_START 1698
PROGRAM_NAME 3 0-35 FE_DATA 3725
PROGRAM_NAME 3 0-35 SOFTWARE_EVENT_10 615
PROGRAM_NAME 5 0-35 CPU_PAR_TRAP_20 1588
PROGRAM_NAME 5 MAIN$Z NODE_DOWN_LINE_DUMP 1743
PROGRAM_NAME 5 MAIN$Z NODE_DOWN_LINE_LOAD 1708
PROGRAM_NAME 7 0-35 KL_OR_KS_PAR_TRAP_10 1001
PROGRAM_NAME 8 0-35 MONITOR_BUG_DATA_20 1338
PROGRAM_NAME 10 0-35 CPU_PAR_INT_10 1124
PROGRAM_NAME 10 0-35 OLD_CPU_MEM_PAR_ERR_10 261
PROGRAM_NAME 11 0-35 TAPE_ERR_10 763
PROGRAM_NAME 12 0-35 MONITOR_BUG_DATA_10 236
PROGRAM_NAME 19 0-35 OLD_CPU_NXM_ERR_10 291
PROGRAM_RUN 12 0-35 DX20_ERR_10 571
PROGRAM_RUN 12 0-35 MASSBUS_ERR_20 1395
PROGRAM_RUN 13 0-35 MASSBUS_ERR_10 519
PROG_ABLE ** 9 DS 4419
PROG_ABLE ** 9 RMDS 4651
PROG_ERROR ** 10 RH11_RMCS2 4360
PROJ_PROG_NO 12 0-35 MASSBUS_ERR_10 517
PROM_STROB ** 5 RMMR1 4690
PSTAT 7 2-9 TM78_SENSE_BYTES 2465
PTCR 1 0-35 CSB_TM02 2087
PTCR 3 0-35 CSB_TM78 2127
PUBLIC_MODE ** 6 PAGE_FAIL_WORD 3996
PWR_FAIL ** 30 APR_STATUS 3970
PWR_OK ** 05 INTSTA 3360
R1_ERW 3 0-35 FE_RELOAD_20 1556
R1_FNM 2 0-35 FE_RELOAD_20 1555
R1_NUM 0 0-35 FE_RELOAD_20 1534
R1_STS 1 0-35 FE_RELOAD_20 1535
RAMT 1 20-27 TM78_SENSE_BYTES 2443
RBC 0 0-35 CSB_DX10 1993
RCMLP 1 28-35 TM78_SENSE_BYTES 2442
RD ** 06 RET2_CNT 3500
RDATA 3 28-35 TM78_SENSE_BYTES 2450
RDC_SEL ** 5-3 XFRCTL 3538
RDERA_PHYS_ADDRESS ** 14-35 RDERA_STATUS 4046
RDERA_STATUS 1 0-35 CPU_PAR_INT_20 1629
RDERA_STATUS 4 0-35 KL_PAR_NXM_INT_10 958
RDERA_STATUS 9 0-35 KL_CPU_STATUS_10 1149
RDERA_STATUS 9 0-35 KL_CPU_STATUS_20 1665
RDERA_STATUS 12 0-35 CPU_PAR_INT_10 1126
RDERA_STATUS 38 0-35 MONITOR_BUG_DATA_20 1354
RDFILE_SEQNUM 4 0 HEADER 156
RDON 2 10-17 TM78_SENSE_BYTES 2444
RDP ** 01 PSTAT 3062
RDY_ON ** 06 TUSTAT 3382
RD_EN ** 05 TUDIAG 3474
RD_GCR 11 0-35 USAGE_DATA_20 1486
RD_NRZI 9 0-35 USAGE_DATA_20 1484
RD_PE 10 0-35 USAGE_DATA_20 1485
RD_WR_UNSF ** 4 ER2 4558
READY ** 7 RMCS1 4637
READ_DATA ** 7-0 PRDD 3082
READ_WRITE ** 30 DCR 4298
RECORD_IN_ERROR 3 0-35 TAPE_ERR_10 722
RECORD_IN_ERROR 3 18-35 DX20_ERR_10 557
RECORD_IN_ERROR 3 18-35 MASSBUS_ERR_20 1374
RECOVERED_COUNT 5 0-35 CPU_PAR_TRAP_10 1100
RECOVERED_COUNT 10 0-35 KL_OR_KS_PAR_TRAP_10 1012
RECV_NODE_ID 0 18-35 NET_HARDWARE_ERR 1750
RECV_NODE_NAME 2 MAIN$Z NET_HARDWARE_ERR 1752
REC_NOMOTION_ERR 4 17 MASSBUS_ERR_20 1384
REDY ** 07 TUSTAT 3385
REF_DATA ** 4-6 RDERA_STATUS 4037
REGISTER_COUNT 27 0-35 MONITOR_BUG_DATA_20 1343
REGISTER_FOUR 31 0-35 MONITOR_BUG_DATA_20 1347
REGISTER_ONE 28 0-35 MONITOR_BUG_DATA_20 1344
REGISTER_THREE 30 0-35 MONITOR_BUG_DATA_20 1346
REGISTER_TWO 29 0-35 MONITOR_BUG_DATA_20 1345
REG_A_ERROR ** 24 CONI_STATUS 4230
REG_BEFORE_ERR 6 0-35 TAPE_ERR_10 745
REG_SEL_CODE ** 0-5 PREP_REG 4307
RELATIVE_ADDRESS 7 0-35 OLD_CPU_NXM_ERR_10 277
RELOAD_FLAGS 6 0-35 SYSTEM_RELOAD_20 1309
REND 2 20-27 TM78_SENSE_BYTES 2447
REQ_A ** 15 RMMR2 4748
REQ_B ** 14 RMMR2 4749
RESERVED_WORD 3 0-35 CHN_LOGOUT 1954
RESET_CLP ** 7 PTCR 4264
RESET_CLP ** 7 STCR 4248
RES_WMC_DRBUS ** 01 WMCSTA 3151
RET1_CNT 13 28-35 TM78_SENSE_BYTES 2490
RET2_CNT 13 20-27 TM78_SENSE_BYTES 2491
RETRIEVE_EXTRACT 0 15 HEADER 138
RETRY_CNT 4 18-35 DX20_ERR_10 564
RETRY_CNT 4 18-35 MASSBUS_ERR_10 501
RETRY_CNT 32 18-35 MASSBUS_ERR_20 1423
RETRY_COUNT 7 18-35 CPU_PAR_TRAP_20 1596
RETURN_CODE 4 28-35 NODE_DOWN_LINE_DUMP 1742
RETURN_CODE 4 28-35 NODE_DOWN_LINE_LOAD 1707
RET_CNT ** 7 - RET1_CNT 3484
REV ** 04 TUX 3515
REVERSE ** 05 MIAA_STAT 3405
REV_CMD ** 05 RET2_CNT 3497
REV_LEVEL_0_3 12 0-35 TAPE_ERR_10 766
REV_LEVEL_4_7 13 0-35 TAPE_ERR_10 767
REW ** 01 TUX 3510
REW_TU ** 04 TUSTAT 3379
RH10_AR_FULL ** 0 CONI_RH10 4188
RH10_ATTN ** 30 CONI_RH10 4209
RH10_BUSY ** 31 CONI_RH10 4210
RH10_CBUS_OVRUN ** 28 CONI_RH10 4207
RH10_CB_FULL ** 1 CONI_RH10 4189
RH10_CC_INH ** 3 CONI_RH10 4190
RH10_CDATA_PE ** 15 CONI_RH10 4196
RH10_CHAN_ACT ** 4 CONI_RH10 4191
RH10_CHAN_ERROR ** 20 CONI_RH10 4201
RH10_CHAN_PLS ** 5 CONI_RH10 4192
RH10_CW_PE ** 16 CONI_RH10 4197
RH10_CW_WRITE ** 21 CONI_RH10 4202
RH10_DBUS_PE ** 18 CONI_RH10 4199
RH10_DF22 ** 6 CONI_RH10 4193
RH10_DONE ** 32 CONI_RH10 4211
RH10_DREXC_ERROR ** 19 CONI_RH10 4200
RH10_DR_RE_ERROR ** 23 CONI_RH10 4204
RH10_ILL_CMD ** 24 CONI_RH10 4205
RH10_ILL_FUNCT ** 9 CONI_RH10 4194
RH10_NXM ** 17 CONI_RH10 4198
RH10_OVER_RUN ** 22 CONI_RH10 4203
RH10_POWER_FAIL ** 25 CONI_RH10 4206
RH10_RAE ** 29 CONI_RH10 4208
RH10_SELDR_ADR_E ** 10 CONI_RH10 4195
RH11_MBUS_CPE ** 13 RMCS1 4632
RH11_SPEC_COND ** 15 RMCS1 4630
RH11_XFER_ERROR ** 14 RMCS1 4631
RH20_FLAG 4 11 TAPE_ERR_10 729
RHCS1_ERR 0 2-17 CSB_TM02 2082
RHCS1_ERR 5 20-35 MASSBUS_ERR_10 504
RHCS1_ERR 5 20-35 MASSBUS_ERR_20 1386
RHCS2_ERR 0 20-35 CSB_TM02 2083
RHCS2_ERR 5 2-17 MASSBUS_ERR_10 503
RHCS2_ERR 13 20-35 MASSBUS_ERR_20 1397
RH_CHAN_TYPE 2 15-17 MASSBUS_ERR_20 1369
RH_CHAN_TYPE 4 12-14 MASSBUS_ERR_10 499
RH_DATI_BAR_END 16 0-35 DX20_ERR_10 578
RH_DATI_BAR_END 16 0-35 MASSBUS_ERR_20 1402
RH_DATI_BAR_END 17 0-35 MASSBUS_ERR_10 527
RH_DATI_BAR_ERR 15 0-35 DX20_ERR_10 576
RH_DATI_BAR_ERR 15 0-35 MASSBUS_ERR_20 1399
RH_DATI_BAR_ERR 16 0-35 MASSBUS_ERR_10 525
RH_DATI_TCR_END 14 0-35 DX20_ERR_10 574
RH_DATI_TCR_END 14 0-35 MASSBUS_ERR_20 1398
RH_DATI_TCR_END 15 0-35 MASSBUS_ERR_10 523
RH_DATI_TCR_ERR 13 0-35 DX20_ERR_10 572
RH_DATI_TCR_ERR 13 0-35 MASSBUS_ERR_20 1396
RH_DATI_TCR_ERR 14 0-35 MASSBUS_ERR_10 520
RH_DEV_TYPE 2 31-35 MASSBUS_ERR_20 1370
RIB_ERRORS 6 12-23 OLD_DISK_STATS_10 843
RIB_ERRORS 7 12-23 DSCSBP 3595
RIB_ERRORS 7 12-23 MASSBUS_ERR_10 507
RILL 2 2-9 TM78_SENSE_BYTES 2445
RMC_CMD ** 7-0 RCMLP 2674
RMC_STATUS ** 7-0 RSTAT 2610
RMK2 2 28-35 TM78_SENSE_BYTES 2446
RMR ** 2 ER1 4446
RMR ** 2 RMER1 4673
RM_DCYL_NO ** 9-0 RMDC 4743
RM_TRACK ** 10-8 RMDA 4712
ROMPE ** 04 WMCERR 3328
ROM_PE ** 06 INTSTA 3363
RP10_CTL_PAR ** 14 CONI_RP10 465
RP10_ILL_DTO ** 27 CONI_RP10 475
RP10_ILL_WRT ** 26 CONI_RP10 474
RP10_MEM_PAR ** 16 CONI_RP10 467
RP10_NOT_RDY ** 25 CONI_RP10 473
RP10_NXM ** 23 CONI_RP10 472
RP10_OVR_RUN ** 22 CONI_RP10 471
RP10_PWR_FAL ** 20 CONI_RP10 469
RP10_SEC_ADD ** 28 CONI_RP10 476
RP10_SEC_PAR ** 15 CONI_RP10 466
RP10_SRH_ERR ** 21 CONI_RP10 470
RP10_SUR_ADD ** 29 CONI_RP10 477
RP10_WRD_PAR ** 17 CONI_RP10 468
RP4_30VU ** 12 ER2 4534
RP4_ACUN ** 15 ER2 4528
RP4_CCYL_NO ** 8-0 CC 4522
RP4_DCYL_NO ** 8-0 DC 4516
RP4_DEQ1 ** 5 DS 4423
RP4_DF20 ** 1 DS 4427
RP4_DF5 ** 0 DS 4428
RP4_DIGB ** 2 DS 4426
RP4_DLT64 ** 4 DS 4424
RP4_FA_EN ** 7 ER2 4549
RP4_FA_EN_6_AB_ST ** 7 ER2 4551
RP4_GOREV ** 3 DS 4425
RP4_MSE_6_RD_WR_UNSF ** 4 ER2 4559
RP4_NOT_6_35V ** 4 ER3 4593
RP4_PS_UN ** 0 ER3 4606
RP4_PS_UN_6_DC_UN ** 0 ER3 4608
RP4_UNSF ** 3 ER3 4596
RP4_VE_US ** 1 ER3 4601
RP4_VE_US_6_WR_OS ** 1 ER3 4603
RP6_35_VF ** 4 ER3 4592
RP6_AB_ST ** 7 ER2 4550
RP6_CCYL_NO ** 9-0 CC 4523
RP6_DCYL_NO ** 9-0 DC 4517
RP6_DC_UN ** 0 ER3 4607
RP6_OPER ** 13 ER3 4577
RP6_RP4_MSE ** 4 ER2 4557
RP6_WR_OS ** 1 ER3 4602
RP7_BSE ** 15 ER3 4573
RP7_CLF ** 11 ER3 4580
RP7_CPU ** 13 ER2 4532
RP7_DCU ** 5 ER3 4590
RP7_DPE ** 3 ER3 4597
RP7_DSE ** 13 ER3 4578
RP7_DVC ** 7 ER3 4584
RP7_ERR_CODE ** 7-0 ER2 4548
RP7_IXU ** 6 ER3 4587
RP7_LBC ** 10 ER3 4581
RP7_LCE ** 9 ER3 4582
RP7_PGE ** 15 ER2 4529
RP7_PHF ** 8 ER3 4583
RP7_RTO ** 0 ER3 4609
RP7_RWU1 ** 10 ER2 4541
RP7_RWU2 ** 11 ER2 4538
RP7_RWU3 ** 12 ER2 4535
RP7_SBE ** 2 ER3 4599
RP7_SCF ** 1 ER3 4604
RP7_SDF ** 4 ER3 4594
RP7_WOR ** 9 ER2 4544
RPATH 1 10-17 TM78_SENSE_BYTES 2440
RPE ** 06 ECCSTA 2889
RPFAIL 0 20-27 TM78_SENSE_BYTES 2439
RPOSTN 3 2-9 TM78_SENSE_BYTES 2449
RPSTA 3 10-17 TM78_SENSE_BYTES 2448
RS04_AO ** 9 RSER 4398
RS04_DCK ** 15 RSER 4392
RS04_DTE ** 12 RSER 4395
RS04_IAE ** 10 RSER 4397
RS04_ILF ** 0 RSER 4402
RS04_ILR ** 1 RSER 4401
RS04_OPI ** 13 RSER 4394
RS04_PAR ** 3 RSER 4399
RS04_RMR ** 2 RSER 4400
RS04_UNS ** 14 RSER 4393
RS04_WLE ** 11 RSER 4396
RSTAT 1 2-9 TM78_SENSE_BYTES 2441
RTIER 6 20-27 TM78_SENSE_BYTES 2463
RUN_GO ** 14 RMMR1 4681
RX_EXCPT ** 12 RMMR1 4683
SAT_ERRORS 6 0-11 OLD_DISK_STATS_10 842
SAT_ERRORS 7 0-11 DSCSBP 3594
SAT_ERRORS 7 0-11 MASSBUS_ERR_10 506
SAVED_ACS 10 BODY MONITOR_BUG_DATA_20 1340
SAVED_ACS 16 BODY MONITOR_BUG_DATA_10 240
SBD0_ADD_PAR_ERROR ** 5 SBD0_DMA 4063
SBD0_BUS_MODE ** 6-7 SBD0_DMA 4064
SBD0_FIRST_ADDRESS ** 14-35 SBD0_DMA 4068
SBD0_LAST_REQ_BITS ** 8-11 SBD0_DMA 4065
SBD0_LAST_REQ_READ ** 12 SBD0_DMA 4066
SBD0_LAST_REQ_WRITE ** 13 SBD0_DMA 4067
SBD0_NXM ** 2 SBD0_DMA 4060
SBD0_READ_PAR_ERR ** 3 SBD0_DMA 4061
SBD0_WRITE_PAR_ERR ** 4 SBD0_DMA 4062
SBD1_CONTR_TYPE ** 8-11 SBDIAG_FUNCTION_1 4085
SBD1_HI_ADR_BOUND ** 22-25 SBD1_MA_MB 4095
SBD1_LOW_ADR_BOUND ** 18-21 SBD1_MA_MB 4094
SBD1_MARGINS_ON ** 30 SBD1_MA_MB 4096
SBD1_REQ_ENABLED ** 32-35 SBD1_MA_MB 4097
SBD1_SBUS_ADDRESS ** 14-17 SBD1_MA_MB 4093
SBDIAG_FUNCTION_0 1 0-35 SBDIAG_LIST 3895
SBDIAG_FUNCTION_1 2 0-35 SBDIAG_LIST 3896
SBDIAG_LIST 5 HEAD KL_PAR_NXM_INT_10 959
SBDIAG_LIST 9 HEAD CPU_PAR_INT_20 1637
SBDIAG_LIST 13 HEAD CPU_PAR_INT_10 1127
SBDIAG_LIST 98 HEAD KL_CPU_STATUS_10 1160
SBDIAG_LIST 98 HEAD KL_CPU_STATUS_20 1676
SBYTE_DET ** 9 MR 4454
SECTOR ** 4-0 DA 4481
SECTOR ** 4-0 RMDA 4713
SECTOR_COUNT ** 10-6 LA 4496
SECT_CNT ** 10-6 RMLA 4725
SEC_CFL ** 29 CONI_STATUS 4225
SEEK_CNT 7 0-35 MASSBUS_ERR_20 1388
SEEK_INC ** 14 ER3 4575
SEEK_INC ** 14 RMER2 4759
SEEK_INC_CNT 4 0-35 OLD_DISK_STATS_10 836
SEEK_INC_CNT 5 18-35 DSCSBP 3588
SEEK_INC_CNT 8 18-35 MASSBUS_ERR_10 509
SEEN_BY_CHANNEL 11 0-35 NXM_MEMORY_SWEEP_10 1036
SEEN_BY_CHANNEL 13 0-35 OLD_CPU_NXM_ERR_10 283
SENSE_BYTES_A 4 0-35 CSB_DX10 2013
SENSE_BYTES_B 5 0-35 CSB_DX10 2014
SENSE_BYTES_C 6 0-35 CSB_DX10 2015
SENSE_BYTES_D 7 0-35 CSB_DX10 2016
SENSE_BYTES_E 8 0-35 CSB_DX10 2017
SENSE_BYTES_F 9 0-35 CSB_DX10 2018
SEQUENCE_NUMBER 4 9-35 HEADER 158
SERIAL_NO ** 15-0 SN 4502
SERIAL_NUMBER 3 20-35 CONFIG_CHANGE_20 1506
SERVER_LINE 2 MAIN$Z NODE_DOWN_LINE_DUMP 1740
SERVER_LINE 2 MAIN$Z NODE_DOWN_LINE_LOAD 1705
SERVER_NODE 1 MAIN$Z NODE_DOWN_LINE_DUMP 1739
SERVER_NODE 1 MAIN$Z NODE_DOWN_LINE_LOAD 1704
SER_ANR ** 7-0 SERA_NR 3450
SER_A_NR 12 20-27 TM78_SENSE_BYTES 2487
SER_BNR ** 7-0 SERB_NR 3458
SER_B_NR 13 10-17 TM78_SENSE_BYTES 2488
SER_CAS_10 8 0-17 TM78_CAS_REGS 2182
SER_CAS_10 8 18-35 TM78_CAS_REGS 2182
SER_NUM ** 15-0 RMSN 4730
SHORT_WCE ** 21 CONI_STATUS 4233
SHUNG_CNT 5 27-35 OLD_DISK_STATS_10 840
SHUNG_CNT 6 27-35 DSCSBP 3592
SHUNG_CNT 9 27-35 MASSBUS_ERR_10 513
SIGN_CNG ** 15 OF 4507
SIM_ATTN ** 34 DCR 4301
SIM_D_EXC ** 31 DCR 4299
SIM_EOB ** 32 DCR 4300
SIM_SCLK ** 35 DCR 4302
SOFTWARE ** 4 PAGE_FAIL_WORD 3994
SOFT_POS_ERR 30 0-35 DX20_ERR_10 593
SOFT_POS_ERR 35 0-35 MASSBUS_ERR_20 1432
SOFT_READ 17 0-35 DX20_ERR_10 580
SOFT_READ 19 0-35 MASSBUS_ERR_20 1408
SOFT_READ_ERRORS 4 0-35 OLD_TAPE_STATS_10 869
SOFT_WRITE 18 0-35 DX20_ERR_10 581
SOFT_WRITE 20 0-35 MASSBUS_ERR_20 1409
SOFT_WRITE_ERRORS 6 0-35 OLD_TAPE_STATS_10 871
SPEED ** 4-3 MIAB_STAT 3424
SPURIOUS_ERRORS 2 0-35 CPU_PAR_INT_10 1116
SPUR_SINCE_RELOAD 2 0-35 NXM_MEMORY_SWEEP_10 1027
SPUR_SINCE_RELOAD 2 0-35 OLD_CPU_MEM_PAR_ERR_10 253
SPUR_SINCE_RELOAD 2 0-35 OLD_CPU_NXM_ERR_10 272
SPUR_SINCE_RELOAD 2 0-35 PAR_MEMORY_SWEEP_10 1048
START_OF_INSTR 0 18-35 DEVICE_STATUS_10 1172
START_OF_RESULTS 1 18-35 DEVICE_STATUS_10 1174
STAT ** 00 CH0TIE 2898
STAT ** 00 CH1TIE 2912
STAT ** 00 CH2TIE 2927
STAT ** 00 CH3TIE 2943
STAT ** 00 CH4TIE 2959
STAT ** 00 CH5TIE 2975
STAT ** 00 CH6TIE 2990
STAT ** 00 CH7TIE 3006
STAT ** 00 CHPTIE 3021
STATUS_CODE 0 0-35 KS_HALT_STATUS_20 1566
STATUS_VALID ** 06 RPATH 2599
STATUS_WORD_1 11 0-35 CSB_DX10 2020
STATUS_WORD_2 12 0-35 CSB_DX10 2025
STAT_PE ** 07 PSTAT 3072
STAT_SELECT ** 01 RPATH 2590
STA_AVAIL ** 07 STA_CAS_7 2353
STA_BOT ** 10 STA_CAS_7 2349
STA_CAS_7 7 0-17 TM78_CAS_REGS 2181
STA_CAS_7 7 18-35 TM78_CAS_REGS 2181
STA_DSE ** 04 STA_CAS_7 2359
STA_EOT ** 09 STA_CAS_7 2350
STA_FPT ** 08 STA_CAS_7 2352
STA_MAINT ** 05 STA_CAS_7 2357
STA_ON_L ** 13 STA_CAS_7 2342
STA_PE ** 11 STA_CAS_7 2345
STA_PRES ** 14 STA_CAS_7 2341
STA_RDY ** 15 STA_CAS_7 2338
STA_REWIND ** 12 STA_CAS_7 2344
STA_SHR ** 06 STA_CAS_7 2355
STD_STATUS 0 0-15 FE_SUB 3743
STEC ** 00 ECCSTA 2880
STOP ** 31 CONO 4323
STOP_BUG_NAME 9 0-35 MONITOR_BUG_DATA_10 233
STOP_BUG_NAME 32 0-35 MONITOR_BUG_DATA_20 1348
STORE_STAT ** 10 PTCR 4265
STORE_STAT ** 10 STCR 4249
STR_NAME 2 0-35 MASSBUS_ERR_10 491
SUM_HARD 4 1 DX20_ERR_10 559
SUM_HARD 4 1 MASSBUS_ERR_10 495
SUM_HARD 4 1 TAPE_ERR_10 727
SUM_HARD 18 2 MASSBUS_ERR_20 1407
SURF_SECT 24 0-35 MASSBUS_ERR_20 1414
SWEEP_BUSY ** 19 APR_STATUS 3962
SWEEP_DONE ** 31 APR_STATUS 3971
SWEEP_FLAG 4 4 CPU_PAR_TRAP_10 1095
SWEEP_FLAG 7 4 CPU_PAR_TRAP_20 1594
SWEEP_FLAG 9 4 KL_OR_KS_PAR_TRAP_10 1007
SWEEP_REF ** 2 RDERA_STATUS 4035
SYS_BUILD_DATE 1 0-35 SYSTEM_RELOAD_20 1301
SYS_BUILD_DATE 3 0-35 MONITOR_BUG_DATA_20 1326
SYS_BUILD_DATE 5 0-35 MONITOR_BUG_DATA_10 229
SYS_BUILD_DATE 5 0-35 SYSTEM_RELOAD_10 205
SYS_NAME 0 0-35 MONITOR_BUG_DATA_10 228
SYS_NAME 0 0-35 SYSTEM_RELOAD_10 204
SYS_NAME 0 MAIN$Z MONITOR_BUG_DATA_20 1321
SYS_NAME 0 MAIN$Z SYSTEM_RELOAD_20 1300
SYS_SER_NUM 3 0-35 HEADER 155
SYS_STATES_WORD 7 0-35 SYSTEM_RELOAD_10 206
SYS_UPTIME 2 0-35 HEADER 153
S_BUS_ERROR ** 24 APR_STATUS 3964
TACH ** 03 TUDIAG 3472
TACK ** 03 PSTAT 3064
TAG 1 0-35 CSB_DX10 1994
TAMT 7 10-17 TM78_SENSE_BYTES 2464
TAPE_DRIVE ** 14 DT 4487
TAPE_UNIT 1 0-35 USAGE_DATA_20 1468
TARGET_NODE 0 MAIN$Z NODE_DOWN_LINE_DUMP 1738
TARGET_NODE 0 MAIN$Z NODE_DOWN_LINE_LOAD 1703
TERMINAL_LOC 4 0-35 SOFTWARE_EVENT_10 616
TERMINAL_NUMBER 0 18-35 ERROR_LOG 3708
TERMINAL_NUMBER 4 24-35 SOFTWARE_EVENT_10 619
TERMINAL_NUMBER 11 0-35 MONITOR_BUG_DATA_10 235
TERMINATION_WORD 5 0-35 CHANNEL_ERROR_REPORT_10 389
TEST_SBAR ** 28 DCR 4296
THUNG_CNT 5 9-17 OLD_DISK_STATS_10 838
THUNG_CNT 6 9-17 DSCSBP 3590
THUNG_CNT 9 9-17 MASSBUS_ERR_10 511
TIE_BUS_0 ** 0 RTIER 3036
TIE_BUS_1 ** 1 RTIER 3041
TIE_BUS_2 ** 2 RTIER 3042
TIE_BUS_3 ** 3 RTIER 3043
TIME_CHANGE 0 0-35 CONFIG_CHANGE_10 644
TM ** 06 TUX 3518
TM10_BAD_TAP ** 28 TM10_TMS 1981
TM10_CMP_ERR ** 25 TM10_TMS 1978
TM10_CTL_PAR ** 11 TM10_TMS 1972
TM10_DAT_LAT ** 27 TM10_TMS 1980
TM10_ILL_OP ** 21 TM10_TMS 1976
TM10_LEN_ERR ** 26 TM10_TMS 1979
TM10_MEM_PAR ** 13 TM10_TMS 1974
TM10_NXM ** 12 TM10_TMS 1973
TM10_PAR_ERR ** 22 TM10_TMS 1977
TM10_TMC 0 0-35 CSB_TM10 1967
TM10_TMS 1 0-35 CSB_TM10 1968
TM10_UNI_HNG ** 18 TM10_TMS 1975
TM78_CAS_REGS_10 6 BODY CSB_TM78 2130
TM78_CAS_REGS_END_20 39 BODY MASSBUS_ERR_20 1450
TM78_CAS_REGS_ERR_20 39 BODY MASSBUS_ERR_20 1451
TM78_SENSE_BYTES_10 24 BODY CSB_TM78 2131
TM78_SENSE_BYTES_20 59 BODY MASSBUS_ERR_20 1453
TM78_U_CODE_REVS_10 0 BODY CSB_TM78 2125
TM78_U_CODE_REVS_20 57 BODY MASSBUS_ERR_20 1452
TMRDY ** 06 CASSTA 3098
TM_CBUS_PE ** 3 MB_ERR 4805
TM_DBUS_PE ** 5 MB_ERR 4803
TM_DR_T_ERROR ** 12 MB_ERR 4790
TM_FMT_ERROR ** 4 MB_ERR 4804
TM_F_C_ERR ** 9 MB_ERR 4795
TM_ILL_FUNC ** 0 MB_ERR 4808
TM_ILL_REG ** 1 MB_ERR 4807
TM_NRZI_CRC ** 15 MB_ERR 4786
TM_NRZI_ITM ** 10 MB_ERR 4793
TM_NRZI_LRC ** 7 MB_ERR 4798
TM_NRZI_VPE ** 6 MB_ERR 4801
TM_NXF ** 11 MB_ERR 4791
TM_N_STD_GAP ** 8 MB_ERR 4796
TM_OPER_INC ** 13 MB_ERR 4789
TM_PE_CORR ** 15 MB_ERR 4785
TM_PE_CORR_NRZI_CRC ** 15 MB_ERR 4787
TM_PE_CS ** 10 MB_ERR 4792
TM_PE_CS_NRZI_ITM ** 10 MB_ERR 4794
TM_PE_FE_NRZI_LRC ** 7 MB_ERR 4799
TM_PE_NDE ** 6 MB_ERR 4800
TM_PE_NDE_NRZI_VPE ** 6 MB_ERR 4802
TM_PE_PFE ** 7 MB_ERR 4797
TM_REG_MOD ** 2 MB_ERR 4806
TM_UNSAFE ** 14 MB_ERR 4788
TOPS20_REC 0 17 HEADER 140
TOP_TEN_BAD_ADD 6 HEAD PAR_MEMORY_SWEEP_10 1052
TOP_TEN_BAD_ADD 8 HEAD CPU_PAR_INT_10 1122
TOP_TEN_BAD_ADD 8 HEAD OLD_CPU_MEM_PAR_ERR_10 259
TOP_TEN_BAD_ADD 10 BODY CPU_PAR_INT_20 1639
TOP_TEN_BAD_ADD 15 HEAD NXM_MEMORY_SWEEP_10 1041
TOP_TEN_BAD_ADD 17 HEAD OLD_CPU_NXM_ERR_10 289
TOP_TEN_BAD_WORDS 20 BODY CPU_PAR_INT_20 1641
TOP_TEN_GOOD_WORDS 30 BODY CPU_PAR_INT_20 1643
TOTAL_READS 6 0-35 USAGE_DATA_20 1481
TOTAL_SEEKS 8 0-35 USAGE_DATA_20 1483
TOTAL_SINCE_RELOAD 1 0-35 NXM_MEMORY_SWEEP_10 1026
TOTAL_SINCE_RELOAD 1 0-35 OLD_CPU_MEM_PAR_ERR_10 252
TOTAL_SINCE_RELOAD 1 0-35 OLD_CPU_NXM_ERR_10 271
TOTAL_SINCE_RELOAD 1 0-35 PAR_MEMORY_SWEEP_10 1047
TOTAL_SWEEPS 3 0-35 PAR_SWEEP_DATA 3849
TOTAL_SWEEPS 9 0-35 OLD_CPU_NXM_ERR_10 279
TOTAL_THIS_SWEEP 6 0-35 NXM_MEMORY_SWEEP_10 1031
TOTAL_THIS_SWEEP 8 0-35 OLD_CPU_NXM_ERR_10 278
TOTAL_WRITES 7 0-35 USAGE_DATA_20 1482
TO_10_POINTER 1 0-35 DTE_BLOCK 3624
TO_11_POINTER 0 0-35 DTE_BLOCK 3623
TPORT2_RD_EN ** 5 TUSEL1 3223
TPORT2_WR_EN ** 3 TUSEL1 3217
TPORT3_RD_EN ** 4 TUSEL1 3220
TPORT3_WR_EN ** 2 TUSEL1 3214
TPSHRE 5 0-35 TAPE_STATS_10 888
TPSHWE 7 0-35 TAPE_STATS_10 890
TPSLAB 9 0-35 TAPE_STATS_10 892
TPSNAM 0 0-35 TAPE_STATS_10 883
TPSPPN 8 0-35 TAPE_STATS_10 891
TPSRID 1 0-35 TAPE_STATS_10 884
TPSSRE 4 0-35 TAPE_STATS_10 887
TPSSWE 6 0-35 TAPE_STATS_10 889
TPSUSN 10 0-35 TAPE_STATS_10 893
TPSUTP 11 0-35 TAPE_STATS_10 894
TPSWRC 2 0-35 TAPE_STATS_10 885
TPSWWC 3 0-35 TAPE_STATS_10 886
TRACK ** 12-8 DA 4480
TRANS ** 05 WMCSTA 3161
TRAN_DET_F ** 5 ER2 4555
TRAN_UNSF ** 6 ER2 4553
TRAP_ENABLE ** 22 PAGE_STATUS 4017
TTEC ** 01 ECCSTA 2881
TUDIAG 13 2-9 TM78_SENSE_BYTES 2489
TUNIT_SEL1 ** 1 - TUSEL1 3210
TUPRES ** 04 PSTAT 3065
TUSEL0 8 20-27 TM78_SENSE_BYTES 2471
TUSEL1 9 10-17 TM78_SENSE_BYTES 2472
TUSTAT 12 10-17 TM78_SENSE_BYTES 2484
TUX 14 10-17 TM78_SENSE_BYTES 2492
TU_AMTIE ** 7-0 TAMT 3051
UBADDR_EXT ** 9-8 RMCS1 4636
UBA_MAP 2 0-35 CSB_TM02 2093
UBA_MAP_END 16 18-35 MASSBUS_ERR_20 1404
UBA_MAP_ERR 16 18-35 MASSBUS_ERR_20 1401
UBA_STATUS 1 0-35 CSB_TM02 2089
UBA_STATUS_END 16 0-17 MASSBUS_ERR_20 1403
UBA_STATUS_ERR 1 18-35 CSB_TM02 2090
UBA_STATUS_ERR 14 18-35 MASSBUS_ERR_10 522
UBA_STATUS_ERR 16 0-17 MASSBUS_ERR_20 1400
UBA_STAT_ACDC_LO ** 26 UBA_STATUS 4346
UBA_STAT_BAD_MDATA ** 19 UBA_STATUS 4341
UBA_STAT_BUS_PE ** 20 UBA_STATUS 4342
UBA_STAT_DIS_XFR ** 28 UBA_STATUS 4347
UBA_STAT_HIGH_PI ** 30-32 UBA_STATUS 4349
UBA_STAT_HI_INT ** 24 UBA_STATUS 4344
UBA_STAT_INIT_UBA ** 29 UBA_STATUS 4348
UBA_STAT_LOW_PI ** 33-35 UBA_STATUS 4350
UBA_STAT_LO_INT ** 25 UBA_STATUS 4345
UBA_STAT_NXD ** 21 UBA_STATUS 4343
UBA_STAT_TIME_OUT ** 18 UBA_STATUS 4340
UBUS_PE ** 13 RH11_RMCS2 4357
UCODE_1 0 0-35 TM78_U_CODE_REVS 2140
UCODE_2 1 0-35 TM78_U_CODE_REVS 2141
UCODE_EDIT 3 6-17 CSB_DX10 1998
UCODE_VERSION 3 0-5 CSB_DX10 1997
UDB_JOB0 17 0-35 MASSBUS_ERR_20 1405
UNC ** 02 ECCSTA 2882
UNICER 10 24-35 OLD_DISK_ERR_10 432
UNINTH 12 0-8 OLD_DISK_ERR_10 435
UNIPHU 12 18-26 OLD_DISK_ERR_10 437
UNIRER 10 12-23 OLD_DISK_ERR_10 431
UNISER 10 0-11 OLD_DISK_ERR_10 430
UNISHU 12 27-35 OLD_DISK_ERR_10 438
UNITHU 12 9-17 OLD_DISK_ERR_10 436
UNIT_ADDR 34 0-35 MASSBUS_ERR_20 1427
UNIT_NUMBER 3 15-17 CONFIG_CHANGE_20 1505
UNIT_NUMBER 5 32-35 USAGE_DATA_20 1479
UNIT_NUMBER 34 32-35 MASSBUS_ERR_20 1430
UNIT_SEL ** 2-0 RH11_RMCS2 4368
UNIT_TYPE 1 31-35 CONFIG_CHANGE_20 1500
UNIT_TYPE 16 30-32 OLD_DISK_ERR_10 447
UNK_DEV_FLAG 4 0 FE_DATA 3726
UNLIKELY_CODE 12 0-17 SYSTEM_RELOAD_10 214
UNLIKELY_CODE 14 0-17 OLD_CPU_NXM_ERR_10 284
UNSAFE ** 14 ER1 4434
UNT_NUMBER 5 32-35 USAGE_DATA_20 1478
UNT_NUMBER 34 32-35 MASSBUS_ERR_20 1429
UN_SAFE ** 14 RMER1 4661
UPT_503 89 0-35 KL_CPU_STATUS_10 1157
UPT_PAGE ** 23-35 PAGE_DATAI 3982
USAGE_EVENT 0 0-35 USAGE_DATA_20 1464
USCBRC 7 0-35 OLD_DISK_STATS_10 845
USCBWC 8 0-35 OLD_DISK_STATS_10 846
USCDRC 9 0-35 OLD_DISK_STATS_10 847
USCDWC 10 0-35 OLD_DISK_STATS_10 848
USCHCT 2 0-35 OLD_DISK_STATS_10 834
USCHID 1 0-35 OLD_DISK_STATS_10 833
USCHNG 5 0-35 OLD_DISK_STATS_10 837
USCICT 13 0-35 OLD_DISK_STATS_10 851
USCMCT 6 0-35 OLD_DISK_STATS_10 841
USCMRC 11 0-35 OLD_DISK_STATS_10 849
USCMSC 15 0-35 OLD_DISK_STATS_10 853
USCMWC 12 0-35 OLD_DISK_STATS_10 850
USCNAM 0 0-35 OLD_DISK_STATS_10 832
USCOCT 14 0-35 OLD_DISK_STATS_10 852
USCSCT 3 0-35 OLD_DISK_STATS_10 835
USCUSC 16 0-35 OLD_DISK_STATS_10 854
USER 9 0-35 OLD_TAPE_STATS_10 874
USER 11 0-35 DX20_ERR_10 570
USER 11 0-35 MASSBUS_ERR_20 1394
USER_ENABLED_COUNT 4 0-35 PAR_SWEEP_DATA 3850
USER_ID 1 0-35 ERROR_LOG 3709
USER_ID 2 0-35 SOFTWARE_EVENT_10 614
USER_ID 3 0-35 CPU_PAR_TRAP_20 1585
USER_ID 6 0-35 KL_OR_KS_PAR_TRAP_10 1000
USER_ID 7 0-35 MONITOR_BUG_DATA_20 1337
USER_ID 9 0-35 CPU_PAR_INT_10 1123
USER_ID 9 0-35 OLD_CPU_MEM_PAR_ERR_10 260
USER_ID 13 0-35 MONITOR_BUG_DATA_10 237
USER_ID 18 0-35 OLD_CPU_NXM_ERR_10 290
V5OK ** 01 CBUSSTA 3114
VALID_VOL ** 6 DS 4422
VALID_VOL ** 6 RMDS 4654
VECT_INTR_ADDR ** 27-35 IVIR 4274
VEL_OK ** 07 RPATH 2601
VIRTUAL ** 8 PAGE_FAIL_WORD 3998
VIRTUAL_ADDRESS ** 18-35 PAGE_FAIL_WORD 4009
VOLUME_ID 2 0-35 USAGE_DATA_20 1469
VOL_ID 1 0-35 MASSBUS_ERR_10 490
VOL_ID 1 0-35 MASSBUS_ERR_20 1367
WCSP ** 02 PSTAT 3063
WD_CNT 5 0-17 FE_DATA 3730
WFAIL_0 ** 00 RPFAIL 2524
WFAIL_1 ** 01 RPFAIL 2531
WFAIL_2 ** 02 RPFAIL 2538
WFAIL_3 ** 03 RPFAIL 2545
WFAIL_4 ** 04 RPFAIL 2552
WFAIL_5 ** 05 RPFAIL 2559
WFAIL_6 ** 06 RPFAIL 2566
WFAIL_7 ** 07 RPFAIL 2574
WHO_ANSWER 2 0-35 ERROR_LOG 3710
WHY_RELOAD_CODE 4 MAIN$Z SYSTEM_RELOAD_20 1306
WHY_RELOAD_CODE 10 0-35 SYSTEM_RELOAD_10 211
WMCERR 11 28-35 TM78_SENSE_BYTES 2482
WMCSCLK ** 01 DBUSSTA 3134
WMCSTA 8 28-35 TM78_SENSE_BYTES 2470
WMC_NOT_DONE ** 06 WMCSTA 3163
WORD1 0 0-35 TOP_TEN 3916
WORD10 9 0-35 TOP_TEN 3925
WORD2 1 0-35 TOP_TEN 3917
WORD3 2 0-35 TOP_TEN 3918
WORD4 3 0-35 TOP_TEN 3919
WORD5 4 0-35 TOP_TEN 3920
WORD6 5 0-35 TOP_TEN 3921
WORD7 6 0-35 TOP_TEN 3922
WORD8 7 0-35 TOP_TEN 3923
WORD9 8 0-35 TOP_TEN 3924
WORD_COUNT ** 15-0 RH11_RMWC 4383
WORD_NUMBER ** 0-1 RDERA_STATUS 4034
WRB4 ** 07 TUDIAG 3476
WRC_SEL ** 2-0 XFRCTL 3530
WRITEABLE ** 3 PAGE_FAIL_WORD 3993
WRITE_DATA ** 3 RMMR1 4692
WRITE_EVEN_ADR_PAR ** 18 PI_STATUS 4024
WRITE_EVEN_DATA_PAR ** 19 PI_STATUS 4025
WRITE_EVEN_DIR_PAR ** 20 PI_STATUS 4026
WRITE_FAIL_P ** 00 RPATH 2588
WRITE_LOCK ** 11 DS 4417
WRITE_LOCK ** 11 RMDS 4649
WRITE_REF ** 5 PAGE_FAIL_WORD 3995
WRITE_UNS ** 8 ER2 4546
WRT ** 04 MIAA_STAT 3403
WRTDAT 9 2-9 TM78_SENSE_BYTES 2473
WRT_TAPE ** 05 TUX 3516
WR_CK_ERROR ** 14 RH11_RMCS2 4356
WR_CK_FAIL ** 5 ER1 4443
WR_CK_FAIL ** 5 RMER1 4670
WR_C_UNSF ** 0 ER2 4567
WR_DATA ** 7-0 WRTDAT 3234
WR_DATA_REG_P ** 04 INTSTA 3356
WR_DATA_STROBE ** 06 PSTAT 3071
WR_GCR 14 0-35 USAGE_DATA_20 1489
WR_INH ** 03 MIAA_STAT 3402
WR_LK_ERROR ** 11 ER1 4437
WR_LK_ERROR ** 11 RMER1 4664
WR_NRZI 12 0-35 USAGE_DATA_20 1487
WR_PE 13 0-35 USAGE_DATA_20 1488
W_SEL_UNSF ** 2 ER2 4563
XFER_SIG ** 26 DCR 4294
XFRCTL 14 2-9 TM78_SENSE_BYTES 2493
XMC_NOT_DONE ** 07 WMCSTA 3170
XMC_WCLK ** 00 WMCSTA 3148
XMIT_NODE_ID 0 0-17 NET_HARDWARE_ERR 1749
XMIT_NODE_NAME 1 MAIN$Z NET_HARDWARE_ERR 1751
XRETRY 14 28-35 TM78_SENSE_BYTES 2494
X_RETRY ** 7 - XRETRY 3556
X_ROMPE ** 00 INTSTA 3347
ZERO_DET ** 8 MR 4455
_BODY_FORMAT 0 18-20 _HEADER 169
_CRASH_EXTRACT 0 16 _HEADER 167
_ENTRY_DATE_TIME 1 0-35 _HEADER 176
_ENTRY_LENGTH 0 27-35 _HEADER 175
_ENTRY_TYPE 0 0-8 _HEADER 164
_HDR_FORMAT 0 21-23 _HEADER 171
_HDR_LENGTH 0 24-26 _HEADER 173
_HDR_WRD_0 0 0-35 _HEADER 163
_RDFILE_SEQNUM 4 0 _HEADER 184
_RETRIEVE_EXTRACT 0 15 _HEADER 166
_SEQUENCE_NUMBER 4 9-35 _HEADER 186
_SYS_SER_NUM 3 0-35 _HEADER 183
_SYS_UPTIME 2 0-35 _HEADER 181
_TOPS20_REC 0 17 _HEADER 168
daemon_version 0 0-35 avail_bof 1906
daemon_version 0 0-35 avail_eof 1911
daemon_wakeup 3 0-35 avail_reload 1898
lgr_address 3 0-35 logger 1848
lgr_block_id 4 0-8 logger 1849
lgr_channel 4 9-17 logger 1850
lgr_count 0 0-17 logger 1845
lgr_cr_msec 1 0-35 logger 1846
lgr_data_block 0 MAIN logger 1844
lgr_kontroller 4 18-26 logger 1851
lgr_sched_down 34 0-35 lgr_data_block 1879
lgr_sched_up 35 0-35 lgr_data_block 1880
lgr_start_msec 8 0-35 lgr_data_block 1874
lgr_start_udt 7 0-35 lgr_data_block 1873
lgr_table 1 MAIN lgr_data_block 1862
lgr_table_count 0 0-35 lgr_data_block 1860
lgr_table_data 1 0-35 lgr_table 1887
lgr_table_gtb 0 18-35 lgr_table 1886
lgr_table_id 1 0-17 lgr_data_block 1861
lgr_table_size 0 0-17 lgr_table 1885
lgr_time_change_udt 16 0-35 lgr_data_block 1877
lgr_unit 4 27-35 logger 1852
lgr_version 0 0-35 lgr_data_block 1871
lgr_wakeup_counter 6 0-35 lgr_data_block 1872
lgr_wakeup_msec 10 0-35 lgr_data_block 1876
lgr_wakeup_udt 9 0-35 lgr_data_block 1875
lgr_wr_msec 2 0-35 logger 1847
monitor_runtime 2 0-35 avail_reload 1897
monitor_version 1 0-35 avail_reload 1896
monitor_version 17 0-35 lgr_data_block 1878
reload_date_time 4 0-35 avail_reload 1899
reload_why_sixbit 5 0-35 avail_reload 1900
sys_build_date 0 0-35 lgr_data_block 1868
sys_name 0 MAIN$Z avail_reload 1895
sys_name 1 0-35 lgr_data_block 1869
time_change 6 0-35 avail_reload 1901