Trailing-Edge
-
PDP-10 Archives
-
BB-R775C-BM
-
sources/scrnewins.bli
There are 10 other files named scrnewins.bli in the archive. Click here to see a list.
%TITLE 'SCRNEWINS - insert a line on the screen'
MODULE SCRNEWINS ( ! Insert a line on the screen
IDENT = '1-022' ! File: SCRNEWINS.BLI Edit: JBS1022
) =
BEGIN
!
! COPYRIGHT (c) 1981, 1985 BY
! DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
! ALL RIGHTS RESERVED.
!
! THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
! ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
! INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
! COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
! OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
! TRANSFERRED.
!
! THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
! AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
! CORPORATION.
!
! DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
! SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
!
!++
! FACILITY: EDT -- The DEC Standard Editor
!
! ABSTRACT:
!
! This module updates the screen information data structure to
! reflect the insertion of a line.
!
! ENVIRONMENT: Runs at any access mode - AST reentrant
!
! AUTHOR: Sharon M. Burlingame, CREATION DATE: September 15, 198E
!
! MODIFIED BY:
!
! 1-001 - Original. SMB 15-Sep-1982.
! 1-002 - Remove the position parameter and assume EOB is last line. SMB 06-Oct-1982
! 1-003 - Remove setting of SCR_PTR. SMB 10-Oct-1982
! 1-004 - Add support for NOTRUNCATE mode. JBS 11-Oct-1982
! 1-005 - Return the number of lines produced. JBS 11-Oct-1982
! 1-006 - Fix a bug found by the QA system in finding a deleted line. JBS 12-Oct-1982
! 1-007 - In NOTRUNCATE mode, leave room for the blob in lines after the first. JBS 12-Oct-1982
! 1-008 - Fix call to EDT$$FMT_CHWID. JBS 13-Oct-1982
! 1-009 - Use memory allocation counter. SMB 18-Oct-1982
! 1-010 - When deleting lines from the screen data base, delete complete records. JBS 23-Oct-1982
! 1-011 - If we delete the [EOB] line from the screen data base, clear the EOB pointer. JBS 23-Oct-1982
! 1-012 - Allow up to five times the number of lines on the screen of screen data blocks. JBS 24-Oct-1982
! 1-013 - [EOB] can only be inserted at the end of the screen data base. JBS 24-Oct-1982
! 1-014 - Correct the code that uses the earliest deleted line. JBS 25-Oct-1982
! 1-015 - Fix another bug in the code that searches for the earliest deleted line. JBS 28-Oct-1982
! 1-016 - Maintain SCR_EDIT_MINPOS. JBS 28-Oct-1982
! 1-017 - Use EDT$$SC_LNDEL to free a line block. JBS 29-Oct-1982
! 1-018 - Add two parameters to help notruncate inserts. SMB 03-Dec-1982
! 1-019 - Change the handling of SHF. JBS 14-Dec-1982
! 1-020 - Fix tabbing at end of line in notruncate mode. JBS 15-Dec-1982
! 1-021 - Remove the edit buffer. JBS 27-Dec-1982
! 1-022 - Set the rebuild flag if we delete the cursor line. JBS 03-Jan-1983
!--
%SBTTL 'Declarations'
!
! TABLE OF CONTENTS:
!
REQUIRE 'EDTSRC:TRAROUNAM';
FORWARD ROUTINE
EDT$$SC_LNINS;
!
! INCLUDE FILES:
!
REQUIRE 'EDTSRC:EDTREQ';
!
! MACROS:
!
! NONE
!
! EQUATED SYMBOLS:
!
! NONE
!
! OWN STORAGE:
!
! NONE
!
! EXTERNAL REFERENCES:
!
! In the routine
%SBTTL 'EDT$$SC_LNINS - insert a line on the screen'
GLOBAL ROUTINE EDT$$SC_LNINS ( ! Insert a line on the screen
SCRPTR, ! Location above which to insert
REC_ADDR, ! Address of new line
REC_LEN ! Length of new line
) =
!++
! FUNCTIONAL DESCRIPTION:
!
! A record has been inserted, update screen line information structure
! by indicating that the line(s) need to be repainted. Get memory
! from heap storage or the pool of available storage as needed.
!
! FORMAL PARAMETERS:
!
! SCRPTR insert the new line(s) just before this line
!
! REC_ADDR the address of the new record
!
! REC_LEN the length of the new record
!
! IMPLICIT INPUTS:
!
! MEM_CNT
! WK_LN
! EOB_LN
! CUR_BUF
! FST_SCRPTR
! LST_SCRPTR
! CUR_SCRPTR
! TI_WID
! SHF
! TRUN
! SCR_LNS
!
! IMPLICIT OUTPUTS:
!
! MEM_CNT
! EOB_SCRPTR
! FST_SCRPTR
! CSR_SCRPTR
! CUR_SCRLN
! LNO_EMPTY
! SCR_REBUILD
! LST_SCRPTR
!
! ROUTINE VALUE:
!
! NONE
!
! SIDE EFFECTS:
!
! NONE
!
!--
BEGIN
EXTERNAL ROUTINE
EDT$$FMT_MSG : NOVALUE, ! Print a message
EDT$$ALO_HEAP, ! Allocate heap storage
EDT$$FMT_CHWID, ! Compute the width of a character
EDT$$SC_LNDEL : NOVALUE; ! Free a line from the screen data base
EXTERNAL
MEM_CNT, ! Memory allocation count
FST_AVLN : REF SCREEN_LINE, ! List of free screen lines
WK_LN : REF LIN_BLOCK, ! Address of current workfile line
EOB_LN, ! Address of EOB
CUR_BUF : REF TBCB_BLOCK, ! Current text buffer control block
EOB_SCRPTR : REF SCREEN_LINE, ! Pointer to EOB screen line
FST_SCRPTR : REF SCREEN_LINE, ! Pointer to first screen line info
LST_SCRPTR : REF SCREEN_LINE, ! Pointer to last screen line info
CUR_SCRPTR : REF SCREEN_LINE, ! Pointer to the current screen line
TRUN, ! 1 = truncate mode
SHF, ! Screen shift amount
TI_WID, ! Width of the terminal
SCR_LNS, ! Number of lines on the screen
CSR_SCRPTR : REF SCREEN_LINE, ! Current cursor line screen info
CUR_SCRLN : LN_BLOCK, ! Absolute record number of that line
LNO_EMPTY : LN_BLOCK, ! Special value for "empty" line number
SCR_REBUILD; ! 1 = rebuild the screen data base from the work file
MESSAGES ((INSMEM));
MAP
SCRPTR : REF SCREEN_LINE;
LOCAL
EDIT_CODE, ! Repaint or insert
NEW_SCRPTR : REF SCREEN_LINE, ! Address of new line info
PREV_SCRPTR : REF SCREEN_LINE, ! Address of previous line info
INDX, ! Index for inserting multiple lines
NEED_ANOTHER_LINE, ! 1 = another line needed for this record
LEFT, ! Left character position for this line
RIGHT, ! Right character position for this line
CHAR,
TXT,
COL,
LEN,
NEW_ADDR;
INDX = 0; ! Start with first line
NEED_ANOTHER_LINE = 1; ! Always need at least one line
LEFT = 0; ! Start the first line at position 0
WHILE (.NEED_ANOTHER_LINE AND (.INDX LEQ 255)) DO
BEGIN
!+
! If we are inserting before a line, look for deleted lines; use the earliest
! one found.
!-
IF (.SCRPTR NEQA 0)
THEN
BEGIN
NEW_SCRPTR = .SCRPTR [SCR_PRV_LINE];
IF (.NEW_SCRPTR NEQA 0)
THEN
BEGIN
IF ((.NEW_SCRPTR [SCR_EDIT_FLAGS] AND SCR_EDIT_DELLN) NEQ 0)
THEN
BEGIN
LOCAL
FOUND_EARLIEST;
FOUND_EARLIEST = 0;
WHILE ( NOT .FOUND_EARLIEST) DO
BEGIN
PREV_SCRPTR = .NEW_SCRPTR [SCR_PRV_LINE];
IF (.PREV_SCRPTR EQLA 0)
THEN
FOUND_EARLIEST = 1
ELSE
BEGIN
IF ((.PREV_SCRPTR [SCR_EDIT_FLAGS] AND SCR_EDIT_DELLN) NEQ 0)
THEN
NEW_SCRPTR = .PREV_SCRPTR
ELSE
FOUND_EARLIEST = 1;
END;
END;
EDIT_CODE = SCR_EDIT_MODIFY;
END
ELSE
NEW_SCRPTR = 0;
END;
END
ELSE
NEW_SCRPTR = 0;
IF (.NEW_SCRPTR EQLA 0)
THEN
BEGIN
MEM_CNT = .MEM_CNT + 1; ! Incremented each time entered
!+
! Unless there is available memory, get some from heap storage for the
! new screen line information buffer.
!-
IF (.FST_AVLN EQLA 0)
THEN
BEGIN
IF ( NOT EDT$$ALO_HEAP (%REF (SCR_SIZE*BYTES_PER_WORD), NEW_ADDR))
THEN
BEGIN
SCR_REBUILD = 1;
EDT$$FMT_MSG (EDT$_INSMEM);
RETURN (0);
END;
NEW_SCRPTR = .NEW_ADDR;
END
ELSE
BEGIN
NEW_SCRPTR = .FST_AVLN;
FST_AVLN = .NEW_SCRPTR [SCR_NXT_LINE];
END;
EDIT_CODE = SCR_EDIT_INSLN;
!+
! If the screen information structure is empty, then initialize
! the screen pointers. Set up the first pointer as EOB if the
! current line is at the end of the buffer.
!-
IF (.FST_SCRPTR EQL 0)
THEN
BEGIN
FST_SCRPTR = .NEW_SCRPTR;
LST_SCRPTR = .NEW_SCRPTR;
NEW_SCRPTR [SCR_NXT_LINE] = 0;
NEW_SCRPTR [SCR_PRV_LINE] = 0;
END
ELSE
BEGIN
!+
! Perform the insert above the given SCRPTR. If that SCRPTR is
! zero, then insert the new line below the last screen pointer.
!-
IF (.SCRPTR EQLA 0)
THEN
BEGIN
NEW_SCRPTR [SCR_NXT_LINE] = 0;
NEW_SCRPTR [SCR_PRV_LINE] = .LST_SCRPTR;
LST_SCRPTR [SCR_NXT_LINE] = .NEW_SCRPTR;
LST_SCRPTR = .NEW_SCRPTR;
!+
! If we have exceeded our maximum screen line insert count, then
! remove the top screen record.
!-
WHILE ((.MEM_CNT GEQ (.SCR_LNS*5)) AND !
(.FST_SCRPTR NEQA .NEW_SCRPTR)) DO
BEGIN
DO
BEGIN
!+
! Check for deleting the cursor line from the data base. If this happens we will
! have to rebuild the screen data base.
!-
IF (.CSR_SCRPTR EQLA .FST_SCRPTR)
THEN
BEGIN
CSR_SCRPTR = 0;
MOVELINE (LNO_EMPTY, CUR_SCRLN);
SCR_REBUILD = 1;
END;
EDT$$SC_LNDEL (.FST_SCRPTR);
END
UNTIL ((.FST_SCRPTR [SCR_LINE_IDX] EQL 0) OR !
(.FST_SCRPTR EQLA .NEW_SCRPTR))
END;
END
ELSE
BEGIN
PREV_SCRPTR = .SCRPTR [SCR_PRV_LINE];
NEW_SCRPTR [SCR_PRV_LINE] = .PREV_SCRPTR;
NEW_SCRPTR [SCR_NXT_LINE] = .SCRPTR;
IF (.PREV_SCRPTR NEQA 0)
THEN
PREV_SCRPTR [SCR_NXT_LINE] = .NEW_SCRPTR
ELSE
BEGIN
FST_SCRPTR = .NEW_SCRPTR;
!+
! If we have exceeded our maximum screen line insert count, then
! remove the bottom screen record.
!-
WHILE ((.MEM_CNT GEQ (.SCR_LNS*5)) AND !
(.LST_SCRPTR NEQA .NEW_SCRPTR)) DO
BEGIN
DO
BEGIN
!+
! Check for deleting the cursor line from the data base. If this happens we will
! have to rebuild the screen data base.
!-
IF (.CSR_SCRPTR EQLA .LST_SCRPTR)
THEN
BEGIN
CSR_SCRPTR = 0;
MOVELINE (LNO_EMPTY, CUR_SCRLN);
SCR_REBUILD = 1;
END;
EDT$$SC_LNDEL (.LST_SCRPTR);
END
UNTIL ((.FST_AVLN [SCR_LINE_IDX] EQL 0) OR !
(.LST_SCRPTR EQLA .NEW_SCRPTR));
END;
END;
SCRPTR [SCR_PRV_LINE] = .NEW_SCRPTR;
END;
END;
END;
!+
! Initialize the fields of the screen information block for repaint.
!-
NEW_SCRPTR [SCR_EDIT_FLAGS] = .EDIT_CODE;
NEW_SCRPTR [SCR_LINE_IDX] = .INDX;
NEW_SCRPTR [SCR_EDIT_MINPOS] = 0;
NEW_SCRPTR [SCR_EDIT_MAXPOS] = 255;
NEW_SCRPTR [SCR_CHR_FROM] = .LEFT;
!+
! Compute the right character position of the current line.
!-
IF ( NOT .TRUN)
THEN
BEGIN
LOCAL
WIDTH;
IF (.INDX EQL 0)
THEN
BEGIN
WIDTH = .TI_WID + .SHF;
COL = 0;
END
ELSE
BEGIN
WIDTH = .TI_WID + .SHF;
COL = .SHF + 2;
END;
!+
! We must compute the width of each character to see how many will fit.
!-
LEN = .REC_LEN - .LEFT;
TXT = CH$PTR (.REC_ADDR, .LEFT, BYTE_SIZE);
RIGHT = .LEFT - 1;
CHAR = CH$RCHAR_A (TXT);
WHILE ((.LEN GTR 0) AND ((.COL + EDT$$FMT_CHWID (.CHAR, .COL)) LEQ .WIDTH)) DO
BEGIN
LEN = .LEN - 1;
RIGHT = .RIGHT + 1;
COL = .COL + EDT$$FMT_CHWID (.CHAR, .COL);
CHAR = CH$RCHAR_A (TXT);
END;
IF (.LEN GTR 0)
THEN
BEGIN
!+
! We need another line.
!-
NEED_ANOTHER_LINE = 1;
LEFT = .RIGHT + 1;
END
ELSE
BEGIN
!+
! We don't need another line.
!-
NEED_ANOTHER_LINE = 0;
RIGHT = 255;
END;
END
ELSE
BEGIN
!+
! Truncate mode, we never need more than one line.
!-
NEED_ANOTHER_LINE = 0;
RIGHT = 255;
END;
NEW_SCRPTR [SCR_CHR_TO] = .RIGHT;
!+
! If there is no current screen pointer, make this line the current line.
!-
IF (.CUR_SCRPTR EQLA 0) THEN CUR_SCRPTR = .NEW_SCRPTR;
INDX = .INDX + 1;
END;
IF ((.WK_LN EQLA EOB_LN) AND (.SCRPTR EQLA 0)) THEN EOB_SCRPTR = .NEW_SCRPTR;
!+
! Return the number of lines produced.
!-
RETURN (.INDX);
END; ! of routine EDT$$SC_LNINS
!<BLF/PAGE>
END ! of module EDT$SCRNEWINS
ELUDOM