Trailing-Edge
-
PDP-10 Archives
-
BB-R775E-BM
-
sources/dil/xpnutl.b36
There are 25 other files named xpnutl.b36 in the archive. Click here to see a list.
%TITLE 'XPNUTL - Utility routines for BLISSnet-20'
MODULE XPNUTL (
ENTRY ( XPN$$VALID_NLB,
XPN$$LINK_STATUS,
XPN$$NEW_BUFFER,
XPN$$INT_SET,
XPN$$SLEEP,
XPN$$JSYS_ERROR,
XPN$$ASSIGN_CHANNEL
),
IDENT = '1'
) =
BEGIN
! COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1981, 1986.
! ALL RIGHTS RESERVED.
!
! THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND
! COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH
! THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR
! ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE
! AVAILABLE TO ANY OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE
! SOFTWARE IS HEREBY TRANSFERRED.
!
! THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT
! NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL
! EQUIPMENT CORPORATION.
!
! DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF
! ITS SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
!++
! FACILITY:
! Transportable BLISS interface to DECNET, TOPS20 implementation.
!
! ABSTRACT:
! This module contains various utility routines called by more then
! one module in the interface.
!
! ENVIRONMENT:
! TOPS20 user mode, with XPORT.
!
! AUTHOR: Larry Campbell, CREATION DATE: November 3, 1981
!
! MODIFIED BY: Andrew Nourse
!
! 01 - End-of-file is an abort condition, not a bug.
!--
!
! TABLE OF CONTENTS:
!
FORWARD ROUTINE
xpn$$valid_nlb, ! Validate an NLB
xpn$$link_status, ! Return status of a link
xpn$$new_buffer : NOVALUE, ! Allocate new input buffer
xpn$$int_set : NOVALUE, ! Set up interrupts for a link
xpn$$sleep : NOVALUE, ! Sleep until interrupted
xpn$$wake : NOVALUE, ! Wake up
xpn$$jsys_error, ! Handle JSYS failure
xpn$$assign_channel; ! Assign interrupt channel & handler
!
! INCLUDE FILES:
!
LIBRARY 'BLI:XPORT'; ! XPORT definitions
LIBRARY 'BLISSNET'; ! Transportable BLISSnet stuff
LIBRARY 'BLI:MONSYM'; ! Monitor symbol definitions
LIBRARY 'BLISSNET20'; ! BLISSnet-20 specific stuff
REQUIRE 'JSYSDEF'; ! JSYS linkage definitions
!
! MACROS:
!
!
! EQUATED SYMBOLS:
!
UNDECLARE
wait,
disms;
LITERAL
wait = %O'104000000306', ! WAIT JSYS
disms = %O'104000000167', ! DISMS JSYS
jfcl = %O'255000000000'; ! JFCL
!
! OWN STORAGE:
!
OWN
net_channel; ! Interrupt channel we're using for net
!
! EXTERNAL REFERENCES:
!
EXTERNAL
psiwxx; ! Location of WAIT JSYS
EXTERNAL ROUTINE
psiint, ! BLSPSI.MAC routines
psisir,
psiwai,
psirst;
GLOBAL ROUTINE xpn$$valid_nlb (nlb) =
!++
! FUNCTIONAL DESCRIPTION:
! This routine checks a Network Link Block for validity
!
! FORMAL PARAMETERS:
! nlb - address of the Network Link Block
!
! IMPLICIT INPUTS:
! NONE
!
! IMPLICIT OUTPUTS:
! NONE
!
! ROUTINE VALUE and
! COMPLETION CODES:
! XPN$_NORMAL - NLB is OK
! XPN$_BAD_SIZE - length is wrong
! XPN$_VERSION - version skew
! XPN$_BAD_FLAGS - inconsistent flags setting
!
! SIDE EFFECTS:
!
! NONE
!
!--
BEGIN
MAP
nlb : REF $XPN_NLB();
nlb_binds;
IF .nlb[NLB$H_LENGTH] NEQ NLB$K_LENGTH
THEN
RETURN (XPN$_BAD_SIZE);
IF .nlb[NLB$B_VERSION] NEQ NLB$K_VERSION
OR .nlb[NLB$B_LEVEL] NEQ NLB$K_LEVEL
THEN
RETURN (XPN$_VERSION);
IF active AND passive
THEN
RETURN (XPN$_BAD_FLAGS);
RETURN (XPN$_NORMAL)
END; !End of xpn$$valid_nlb
GLOBAL ROUTINE xpn$$link_status (nlb) =
!++
! FUNCTIONAL DESCRIPTION:
! Returns the link status word returned by the MTOPR_ JSYS $MORLS function.
!
! FORMAL PARAMETERS:
! nlb - address of the Network Link Block
!
! IMPLICIT INPUTS:
! NLB$H_JFN - JFN for the network link
!
! IMPLICIT OUTPUTS:
! NONE
!
! ROUTINE VALUE and
! COMPLETION CODES:
! One fullword of link status as returned by the MTOPR_ $MORLS function.
! If there is no JFN, or the MTOPR_ fails, zero is returned.
!
! SIDE EFFECTS:
! NONE
!
!--
BEGIN
MAP
nlb : REF $XPN_NLB();
LOCAL
retval;
IF .nlb[NLB$H_JFN] EQL 0
THEN
RETURN (0);
IF JSYS_MTOPR (.nlb[NLB$H_JFN], $MORLS, 0, 0; , , retval)
THEN
RETURN (.retval)
ELSE
BEGIN
JSYS_GETER ($FHSLF; retval);
nlb[NLB$G_2ND_CODE] = .retval<rh>;
RETURN (0)
END;
END; ! End of xpn$$link_status
GLOBAL ROUTINE xpn$$new_buffer (buffer_descriptor, byte_count) : NOVALUE =
!++
! FUNCTIONAL DESCRIPTION:
! This routine releases any previous buffer associated with an NLB
! and allocates a new buffer with room for .byte_count bytes. We
! have to fudge with the descriptor because XPORT binary data descriptors
! want to put one 8-bit byte per addressable unit (word), which is incredibly
! inefficient on 36-bit machines. We set up the descriptors to point to
! real strings of 8-bit bytes, so all the CH$xxx functions can work.
!
! FORMAL PARAMETERS:
! buffer_descriptor - address of the descriptor for the buffer
! byte_count - how many bytes to allocate space for
!
! IMPLICIT INPUTS:
! Buffer descriptor - memory pointed to is freed
!
! IMPLICIT OUTPUTS:
! Buffer descriptor - updated to point to new buffer
!
! ROUTINE VALUE and
! COMPLETION CODES:
! NONE
!
! SIDE EFFECTS:
! NONE
!
!--
BEGIN
MAP
buffer_descriptor : REF $XPO_DESCRIPTOR (CLASS = DYNAMIC);
!
! Release stale previous buffer if necessary
!
IF .buffer_descriptor[XPO$A_ADDRESS] NEQ 0
THEN
BEGIN
LOCAL
buffer_address;
buffer_descriptor[XPO$H_LENGTH] =
(.buffer_descriptor[XPO$H_LENGTH] + 3) / 4;
!
! XPO$A_ADDRESS really contains a byte pointer, which we must first
! convert to an address for $XPO_FREE_MEM's sake. BLISS character
! pointers point to <byte - 1> (for ILDB's sake) so we have to
! increment the pointer first.
!
buffer_address = CH$PLUS (.buffer_descriptor[XPO$A_ADDRESS], 1);
buffer_address = .buffer_address<rh>;
buffer_descriptor[XPO$A_ADDRESS] = .buffer_address;
$XPO_FREE_MEM (BINARY_DATA = .buffer_descriptor)
END;
!
! Allocate string space for this data, fudge the descriptor
! to point to string of 8-bit bytes rather than string of
! addressable units.
!
$XPO_DESC_INIT (DESCRIPTOR = .buffer_descriptor,
CLASS = DYNAMIC);
$XPO_GET_MEM (FULLWORDS = ((.byte_count + 3) / 4),
DESCRIPTOR = .buffer_descriptor);
buffer_descriptor[XPO$H_LENGTH] = .byte_count;
buffer_descriptor[XPO$A_ADDRESS] =
CH$PTR (.buffer_descriptor[XPO$A_ADDRESS], 0, 8);
END; !End of xpn$$new_buffer
GLOBAL ROUTINE xpn$$int_set (nlb_vector) : NOVALUE =
!++
! FUNCTIONAL DESCRIPTION:
! Sets up to receive interrupts for connect events on any JFN for any
! link specified by NLBs given. The first time this routine is called,
! it initializes the software interrupt system and assigns an unused
! channel for the interface's use.
!
! FORMAL PARAMETERS:
! nlb_vector - counted vector of addresses of Network Link Blocks
!
! IMPLICIT INPUTS:
! NONE
!
! IMPLICIT OUTPUTS:
! NONE
!
! ROUTINE VALUE and
! COMPLETION CODES:
! NONE
!
! SIDE EFFECTS:
! An unassigned interrupt channel is assigned.
!
!--
BEGIN
MAP
nlb_vector : REF VECTOR[0];
OWN
once_only_flag : INITIAL (0);
!
! Assign an unused interrupt channel if we haven't already done so.
!
IF NOT (.once_only_flag)
THEN
BEGIN
net_channel = xpn$$assign_channel (xpn$$wake);
once_only_flag = 1
END;
!
! For each NLB specified, request the monitor to interrupt us on any events
!
INCR i FROM 1 TO .nlb_vector[0]
DO
BEGIN
BIND
nlb = .nlb_vector[.i] : $XPN_NLB();
IF NOT .nlb[NLB$V_INT_SET]
THEN
BEGIN
LOCAL
channel_args;
channel_args = 0;
channel_args<27,9> = .net_channel; ! Connect events
channel_args<18,9> = .net_channel; ! Interrupt msg events
channel_args< 9,9> = .net_channel; ! Data available events
IF NOT JSYS_MTOPR (.nlb[NLB$H_JFN],
$MOACN,
.channel_args,
0)
THEN
xpn$$bug ('Cannot set interrupt assignments');
nlb[NLB$V_INT_SET] = 1
END
END
END;
GLOBAL ROUTINE xpn$$sleep (msec) : NOVALUE =
!++
! FUNCTIONAL DESCRIPTION:
! Sleep the specified number of milliseconds. An interrupt on any
! link will cause a premature wakeup, giving the program the opportunity
! to service the condition more quickly. Requesting a sleep of zero
! length causes an infinite sleep.
!
! FORMAL PARAMETERS:
! msec - number of milliseconds to sleep
!
! IMPLICIT INPUTS:
! NONE
!
! IMPLICIT OUTPUTS:
! NONE
!
! ROUTINE VALUE and
! COMPLETION CODES:
! NONE
!
! SIDE EFFECTS:
! NONE
!
!--
BEGIN
!
! Set up a WAIT or DISMS, depending on which caller wants.
!
psiwxx = (IF .msec EQL 0 THEN wait ELSE disms);
!
! Now activate the channel and go to sleep.
!
JSYS_AIC ($FHSLF, 1 ^ (35 - .net_channel));
PSIWAI (.msec) ! Sleep, return to caller when woken
END; ! End of xpn$$sleep
ROUTINE xpn$$wake : NOVALUE =
!++
! FUNCTIONAL DESCRIPTION:
! This is the routine called at interrupt level when an event occurs
! for any of the NLBs specified in the call to XPN$$SLEEP. It merely
! deactivates the interrupt channel (so interrupts are stacked) and
! calls PSIRST to wake up the background routine. We also step on
! the WAIT JSYS at PSIWXX (turn it to JFCL) in case the interrupt
! happened before PSIWAI was called. PSIWAI's caller must reset it
! before calling PSIWAI.
!
! FORMAL PARAMETERS:
! NONE
!
! IMPLICIT INPUTS:
! NONE
!
! IMPLICIT OUTPUTS:
! NONE
!
! ROUTINE VALUE and
! COMPLETION CODES:
! NONE
!
! SIDE EFFECTS:
! The interrupt channel is deactivated and the sleeping background
! task is woken. The instruction at PSIWXX is turned to JFCL.
!
!--
BEGIN
JSYS_DIC ($FHSLF, 1 ^ (35 - .net_channel));
PSIRST (); ! Wake the sleeping routine
psiwxx = jfcl;
END; ! End of xpn$$wake
GLOBAL ROUTINE xpn$$jsys_error (nlb, jsys_number) =
!++
! FUNCTIONAL DESCRIPTION:
! Handles unexpected failure of a JSYS.
!
! FORMAL PARAMETERS:
! nlb - address of the Network Link Block involved
! jsys_number - low-order 18 bits of the failing JSYS instruction
!
! IMPLICIT INPUTS:
! NONE
!
! IMPLICIT OUTPUTS:
! NONE
!
! ROUTINE VALUE and
! COMPLETION CODES:
! This routine attempts to return a "reasonable" error code depending
! on the nature of the JSYS error. For example, IOX5 (device or data
! error) will return XPN$_ABORTED, while DESX1 (invalid source/destination
! designator) almost certainly is the result of a bug and will result
! in XPN$_BUG.
!
! XPN$_ABORTED - link was apparently aborted
! XPN$_BUG -
!
! SIDE EFFECTS:
! NONE
!
!--
BEGIN
LOCAL
tops20_code;
MAP
nlb : REF $XPN_NLB ();
JSYS_GETER ($FHSLF; tops20_code);
tops20_code = .tops20_code<rh>;
RETURN
SELECTONE .tops20_code OF
SET
[IOX4, IOX5, NSPX00 TO NSPX22, DCNX11] : ![1] Abort/Disconnect
BEGIN ! in several flavors
LOCAL
link_status;
link_status = xpn$$link_status (.nlb);
nlb[NLB$G_2ND_CODE] = .link_status<rh>;
IF (.link_status AND MO_ABT) NEQ 0
THEN
XPN$_ABORTED
ELSE
XPN$_DISCONN
END;
[OTHERWISE] :
BEGIN
nlb[NLB$G_2ND_CODE] = .tops20_code;
XPN$_BUG
END;
TES
END; ! End of xpn$$jsys_error
GLOBAL ROUTINE xpn$$assign_channel (handler) =
!++
! FUNCTIONAL DESCRIPTION:
! Assign an unused interrupt channel. Init interrupt system if
! necessary. Set up LEVTAB and CHNTAB and point CHNTAB to the
! handler routine. This routine does not activate the channel;
! the caller must do the AIC JSYS to activate the channel. This
! insures that interrupts won't occur until the caller is ready.
!
! FORMAL PARAMETERS:
! handler - address of interrupt handler routine
!
! IMPLICIT INPUTS:
! NONE
!
! IMPLICIT OUTPUTS:
! NONE
!
! ROUTINE VALUE and
! COMPLETION CODES:
! The channel assigned is returned.
!
! SIDE EFFECTS:
! NONE
!
!--
BEGIN
OWN
once_only_flag : INITIAL (0);
LOCAL
channel_mask,
channel;
BUILTIN
FIRSTONE; ! JFFO! Yaayyy!
IF NOT .once_only_flag ! If first time,
THEN ! then initialize interrupt system
BEGIN
once_only_flag = 1;
psisir ($FHSLF) ! Set interrupt tables
END;
!
! Get complement of assigned channel mask
!
channel_mask = NOT
BEGIN
LOCAL
retval;
JSYS_RCM ($FHSLF; retval);
.retval
END;
!
! Search for an unused channel
!
channel = -1;
WHILE .channel_mask NEQ 0
DO
BEGIN
!
! Find first one bit and clear it from the mask
!
channel = FIRSTONE (.channel_mask);
channel_mask = .channel_mask XOR (1 ^ (35 - .channel));
!
! Now make sure this is a channel we're allowed to use
!
SELECTONE .channel
OF
SET
[6 TO 22] : channel = -1; ! No good
[OTHERWISE] : channel_mask = 0; ! Win...
TES;
END;
!
! OK, we either found a channel or none are available
!
IF .channel EQL -1
THEN
$XPO_PUT_MSG (SEVERITY = FATAL,
STRING = 'No interrupt channels available');
!
! Set up LEVTAB and CHNTAB
!
psiint (.channel, .handler, 3);
JSYS_EIR ($FHSLF);
RETURN (.channel)
END; ! End of xpn$$assign_channel
END ! End of module XPNUTL
ELUDOM