Trailing-Edge
-
PDP-10 Archives
-
BB-T573C-DD_1986
-
10,7/whoscn.mac
There are 4 other files named whoscn.mac in the archive. Click here to see a list.
TITLE WHOSCN - SCAN interface for WHO
SEARCH WHOMAC
$SETUP (WHOSCN)
IFN FTTUFTS,<SEARCH TCSSYM>
Comment |
This module contains most of the routines needed to interface with
SCAN, such as switch tables, switch processing routines, and file
specification allocation routines.
|
; TABLE OF CONTENTS FOR WHOSCN
;
;
; SECTION PAGE
; 1. SCAN switches
; 1.1 Definition of switches............................ 3
; 1.2 Keyword values.................................... 4
; 1.3 Expansion of switches............................. 5
; 2. SCAN switch expansions
; 2.1 'ABR mode......................................... 5
; 3. SCAN switches
; 3.1 Global switch storage and defaults................ 6
; 3.2 File specific switch storage and defaults.......... 7
; 4. SCAN Blocks............................................... 8
; 5. Switch scanning routines
; 5.1 $MONITOR - Reset /CRASH........................... 9
; 5.2 $CRASH - Read a crash filespec.................... 10
; 5.3 $NAMEW - Read a wildcarded SIXBIT word............ 12
; 5.4 $PPN - Read a wildcarded PPN...................... 12
; 5.5 $CORE - Read a core specification................. 12
; 5.6 $NODE - Read a wildcarded node name............... 13
; 5.7 $PHONE - Read a phone number string............... 14
; 5.8 $SORT - Read a sort specification................. 15
; 5.9 $SUMMARY - Read a summary keyword................. 15
; 5.10 $REP - Read a repeat time and count............... 16
; 5.11 $TTY, $PTY, $DET - Read terminal specifications... 17
; 5.12 $DISK - Read disk priority........................ 18
; 5.13 $FORCE - Read a forced command.................... 19
; 5.14 $MODE - Read /MODE specifier...................... 20
; 5.15 .DECPW - Read positive decimal number............. 21
; 6. Defaulting
; 6.1 Scan specifications............................... 23
; 6.2 Switch defaults................................... 24
; 6.3 Format switch..................................... 25
; 6.4 Output specification defaults..................... 26
; 7. SCAN support
; 7.1 CLRANS - Clear answers and reset things........... 27
; 7.2 AOUT - Allocate an output spec.................... 28
; 7.3 AIN - Allocate an input spec...................... 29
; 8. Tables
; 8.1 Format defaults................................... 30
; 8.2 Monitor command interface......................... 31
; 8.3 SUMMARY and SORT keywords......................... 31
; 8.4 STATE keywords.................................... 32
; 9. Other routines
; 9.1 SETSPC - Set start and end of concatinated set.... 33
; 9.2 FIXTTY - Convert TTY/PTY/CTY to standard format... 34
; 9.3 FIXNNN - Form octal terminal number............... 34
; 9.4 TTYNNN - Form SIXBIT terminal number.............. 34
; 9.5 CHKJOB - Range check job number................... 34
; 9.6 FIXNOD - Fix up node specification................ 35
; 9.7 MSKUC/MSKLC - Convert ASCII strings to masks...... 36
; 10. Storage................................................... 37
SUBTTL SCAN switches -- Definition of switches
DEFINE SWTCHS,<
IFN FTTUFTS,<
SWT(JOB) SS ACADEMIC,S.CLASS,CL$ACAD,
>
SWT(JOB) SP ACCOUNT,<POINT ^D65-10,S.ACCOUNT>,.ASCQW##,,FS.VRQ
SWT(JOB) SN ACTIVE,S.ACTIVE,
IFN FTTUFTS,<
SWT(JOB) SS ADMINISTRATION,S.CLASS,CL$ADM,
>
SWT(ALL) SN APPEND,S.APPEND,FS.NFS
SWT(<JOB,LIN>) SS AUTODIALER,S.APC,.TOADL
SWT(LIN) SN ASSIGN,S.ASSIGN
IFN FTIPC,<
SWT(JOB) SP BADGE,S.BADGE,.SWDEC##,,FS.VRQ
>;END IFN FTIPC
SWT(JOB) SN BATCH,S.BATCH,
SWT(JOB) SN BBATCH,S.BBATCH,
SWT(ALL) SS BLANK,S.DFORMAT,FORBLANK
SWT(JOB) SL CAPABILITY,<-1,,SLCAP>,PR,,FS.VRQ!FS.OBV
SWT(LIN) SN CARRIER,S.CARRIER
SWT(ALL) SP CACHE,,$CACHE,,FS.VRQ!FS.NFS!FS.NCM
IFN FTIPC,<
SWT(JOB) SP CATEGORY,S.CATEGORY,.SWOCT##,CAT,FS.VRQ
>;END IFN FTIPC
SWT(NOD) SN CDP,S.CDP,
SWT(NOD) SN CDR,S.CDR,
SWT(JOB) SP CHARGE,<POINT ^D65-2,S.CHARGE>,$NAMEW,,FS.VRQ!FS.HEL
IFN FTIPC,<
SWT(JOB) SP CID,<POINT ^D65-2,S.CID>,$NAMEW,,FS.VRQ!FS.HEL
>;END IFN FTIPC
SWT(JOB) SP CLASS,S.CLASS,.SWDEC##,CLS,FS.VRQ
SWT(ALL) SP COLUMN,S.COLUMN,.SWDEC##,COL
SWT(JOB) SP CORE,<POINT ^D65-2,S.CORE>,$CORE,,FS.VRQ!FS.HEL
SWT(ALL) SP CRASH,S.CRASH,$CRASH,CRS,FS.NFS!FS.NCM
SWT(<JOB,LIN>) SS CTERM,S.APC,.TOCTM
SWT(JOB) SP CTLJOB,S.CTLJOB,.SWDEC##,CTL,
SWT(JOB) SP CTLPRG,<POINT ^D65-2,S.CTLPRG>,$NAMEW,,FS.VRQ!FS.HEL
SWT(<JOB,LIN>) SS CTY,S.TTY,'CTY'
SWT(JOB) SP DDB,S.DDB,.SWFIL##,DDB,FS.VRQ
SWT(JOB) SL *DDBS,S.DDBS,%,PD.DDB,
SWT(NOD) SN DDP,S.DDP
SWT(JOB) SN DDT,S.DDT,
SWT(ALL) SS DEFAULT,S.DFORMAT,FORDEFAULT,FS.NFS
SWT(JOB) SP DETACH,S.TTY,$DET,DET,FS.LRG!FS.HEL
SWT(JOB) SP DEVICE,S.DEVICE,.SWSIX##,,FS.VRQ
SWT(<JOB,LIN>) SS DIALUP,S.APC,.TODSD
SWT(ALL) SP DPY,<POINT ^D65-2,S.DPY>,$REP,REP,FS.NFS!FS.HEL
SWT(JOB) SP DSKPRI,S.DSKP,$DISK,DPR,FS.HEL
SWT(NOD) SN DTA,S.DTA
SWT(ALL) SS *FAST,S.FORMAT,%FAST,
SWT(JOB) SP FILE,S.DDB,.SWFIL##,DDB,FS.VRQ
SWT(JOB) SL FILES,S.DDBS,%,PD.DDB,
SWT(ALL) SP FINAL,S.FINAL,FINSWT##,,FS.NFS!FS.VRQ
SWT(ALL) SS FIX,S.DFORMAT,FORFIX,FS.NFS
SWT(ALL) SS FLOAT,S.DFORMAT,FORFLOAT,FS.NFS
SWT(ALL) SP FORMAT,S.FORMAT,FORSWT##,,FS.VRQ
SWT(ALL) SP FOOTING,S.FOOT,FOOSWT##,,FS.VRQ
SWT(<JOB,LIN>) SP FORCE,S.FORCE,$FORCE,,FS.NFS!FS.VRQ!FS.HEL
SWT(<JOB,LIN>) SS GANDALF,S.APC,.TOGAN
SWT(JOB) SL GLXOPR,S.GLXOPR,GOP,PD.GOP,
SWT(LIN) SN HANGUP,S.HANGUP
SWT(<JOB,LIN>) SS HARDWIRED,S.APC,.TOHWD
SWT(ALL) SP HEADING,S.HEAD,HEASWT##,,FS.VRQ
SWT(NOD) SN HOST,S.MCR, ;;Same as /MCR
SWT(JOB) SP HPQ,S.HPQ,.SWDEC##,HPQ,
SWT(ALL) SN I,S.INCREMENTAL,FS.NFS
SWT(ALL) SL *INCLUDE,S.INCLUDE,INC,,FS.NFS!FS.OBV
SWT(ALL) SN INCREMENTAL,S.INCREMENTAL,FS.NFS
SWT(ALL) SL INFORMATION,<-1,,SLIFM>,IFM,,FS.VRQ!FS.OBV
SWT(LIN) SN INITED,S.INTED ;;S.INIT IS FOR /INITIAL
SWT(ALL) SP INITIAL,S.INIT,INISWT##,,FS.NFS!FS.VRQ
SWT(<JOB,LIN>) SP INPUT,<POINT ^D65-LN$SND,S.INPUT>,.ASCQW##,,FS.NFS!FS.VRQ
SWT(<JOB,LIN>) SP JOB,S.JOB,.SWDEC##,JOB,
SWT(JOB) SL JSTATUS,S.JSTATUS,ST,,FS.VRQ!FS.OBV
SWT(NOD) SN KNOWN,S.KNOWN
SWT(<JOB,LIN>) SS LAT,S.APC,.TOLAT
SWT(<JOB,LIN>) SN LOCAL,S.LCAL
SWT(JOB) SP LOCATE,S.LOCATE,.SWOCT##,LOC,
SWT(LIN) SP LOCATE,<POINT ^D65-4,S.LOCATE>,.ASCQW##,,FS.VRQ
IFN FTLGNQ,<
SWT(LIN) SN LOGINQ,S.LOGINQ,
> ;END IFN FTLGNQ
IFN FTIPC,<
SWT(JOB) SP LPPN,<POINT ^D65-2,S.LPPN>,$PPN,,FS.VRQ!FS.HEL
>;END IFN FTIPC
SWT(NOD) SN LPT,S.LPT
SWT(ALL) SN MAP,S.MAP,
SWT(NOD) SN MCR,S.MCR
SWT(LIN) SN MIC,S.MIC,
SWT(<JOB,LIN>) SS MICOM,S.APC,.TOMCM
SWT(ALL) SP MODE,,$MODE,,FS.VRQ!FS.NFS!FS.NCM
SWT(ALL) SP MONITOR,S.MONITOR,$MONITOR,,FS.NFS!FS.NCM
SWT(JOB) SP MOUNT,S.MOUNT,.SWSIX##,,FS.VRQ
SWT(ALL) SN MPERFORMANCE,S.MPERFORMANCE,FS.NFS
SWT(NOD) SN MTA,S.MTA
SWT(JOB) SP NAME,<POINT ^D65-2,S.NAME>,.SIXQW##,,FS.VRQ
SWT(LIN) SL NETWORK,S.NETWORK,NET,,FS.NFS!FS.VRQ
SWT(<JOB,LIN>) SS NOAUTODIALER,S.APC,<-.TOADL&777777>
SWT(<JOB,LIN>) SS NOCTY,S.TTY,'CTY'+1000000,FS.LRG
SWT(<JOB>) SS NODDBS,S.DDBS,0,
SWT(<JOB>) SP NODE,<POINT ^D65-3,S.NODE>,$NODE,,FS.VRQ!FS.HEL
SWT(<LIN>) SP *NODE,<POINT ^D65-3,S.NODE>,$NODE,,FS.VRQ!FS.HEL
SWT(<NOD>) SP NODE,<POINT ^D65-2,S.NODE>,$NAMEW,,FS.VRQ!FS.HEL
SWT(<JOB,LIN>) SS NODETACH,S.TTY,'DET'+1000000,FS.LRG
SWT(<JOB,LIN>) SS NODIALUP,S.APC,<-.TODSD&777777>
SS(<JOB>) SS NOFILES,S.DDBS,0
SWT(<JOB,LIN>) SS NOGANDALF,S.APC,<-.TOGAN&777777>
SWT(<JOB,LIN>) SS NOHARDWIRED,S.APC,<-.TOHWD&777777>
SWT(<JOB,LIN>) SS NOMICOM,S.APC,<-.TOMCM&777777>
SWT(<JOB,LIN>) SS NONRTSER,S.APC,<-.TONRT&777777>
SWT(JOB) SS *NOOPERATOR,S.OPER,OPRNO
SWT(<JOB,LIN>) SS NOPTY,S.TTY,'PTY'+1000000,FS.LRG
SWT(ALL) SS NORMAL,S.FORMAT,%NORMAL,
SWT(<JOB,LIN>) SS NOTSN,S.APC,<-.TOTSN&777777>
SWT(<JOB,LIN>) SS NOTTY,S.TTY,'TTY'+1000000,FS.LRG
SWT(<JOB,LIN>) SS NRTSER,S.APC,.TONRT
SWT(JOB) SL OPERATOR,S.OPER,OPR,OPRYES
SWT(<JOB,LIN>) SP OUTPUT,<POINT ^D65-LN$SND,S.OUTPUT>,.ASCQW##,,FS.NFS!FS.VRQ
SWT(JOB) SN ORIGIN,S.ORIGIN,
SWT(<JOB,LIN,UNI>) SN PERFORMANCE,S.PERF,FS.NFS
SWT(JOB) SN PFH,S.PFH
SWT(LIN) SP PHONE,<POINT ^D65-4,S.LOCATE>,$PHONE,,FS.VRQ!FS.HEL
IFN FTIPC,<
SWT(JOB) SN PIVOTED,S.PIVOT,FS.NFS
>;END IFN FTIPC
SWT(NOD) SN PLT,S.PLT,
IFN FTPOWER,<
SWT(LIN) SN POWER,S.POWER
>
SWT(JOB) SP PPN,<POINT ^D65-2,S.PPN>,$PPN,,FS.VRQ!FS.HEL
SWT(ALL) SN PRINT,S.PRINT,FS.NFS
SWT(JOB) SL PRIVILEGE,<-1,,SLPRV>,PR,,FS.VRQ!FS.OBV
SWT(JOB) SP PRGRUN,<POINT ^D65-2,S.PRGRUN>,$NAMEW,,FS.VRQ!FS.HEL
SWT(JOB) SP *PROGRAM,<POINT ^D65-2,S.PROG>,$NAMEW,,FS.VRQ!FS.HEL
SWT(NOD) SN PTP,S.PTP,
SWT(NOD) SN PTR,S.PTR,
SWT(<JOB,LIN>) SP PTY,S.TTY,$PTY,PTY,FS.LRG
SWT(JOB) SP RBEFORE,S.RBEFORE,.DATIP##,,FS.VRQ
SWT(LIN) SL RCVSPEED,S.RCVSPEED,SPD,,FS.VRQ
SWT(NOD) SN RDA,S.RDA,
SWT(NOD) SN REACHABLE,S.REACHABLE
SWT(<JOB,LIN>) SN REMOTE,S.REMOTE,
SWT(ALL) SP REPEAT,<POINT ^D65-2,S.REPEAT>,$REP,REP,FS.NFS!FS.HEL
SWT(JOB) SP RSINCE,S.RSINCE,.DATIP##,,FS.VRQ
SWT(JOB) SP SEGMENT,<POINT ^D65-2,S.SEGM>,$NAMEW,,FS.VRQ!FS.HEL
SWT(JOB) SN SELF,S.SELF,
SWT(<JOB,LIN>) SP SEND,<POINT ^D65-LN$SND,S.SEND>,.ASCQW##,,FS.NFS!FS.VRQ
IFN FTSERV,<
SWT(ALL) SP SERVER,<POINT ^D65-.SVMAX,S.SERV>,$SERVER,,FS.NFS!FS.VRQ!FS.HEL
> ;END IFN FTSERV
IFN FTMDC,<
SWT(JOB) SN SETP,S.SETP,
>;END IFN FTMDC
SWT(<JOB,LIN>) SP SETUUO,,$SETUUO,,FS.NFS!FS.VRQ!FS.HEL
SWT(LIN) SN SLAVE,S.SLAVE,
IFN FTIPC,<
SWT(JOB) SP SLOT,S.SLOT,.SWOCT##,SLT,FS.VRQ
>;END IFN FTIPC
SWT(ALL) SS *SLOW,S.FORMAT,%SLOW,
SWT(ALL) SP SORT,<POINT ^D65-3,S.SORT>,$SORT,,FS.NFS!FS.VRQ!FS.HEL
SWT(LIN) SL SPEED,S.SPEED,SPD,,FS.VRQ
SWT(ALL) SN STAMP,S.STAMP,FS.NFS
SWT(JOB) SL STATE,S.STATE,STAT,,FS.VRQ!FS.OBV
SWT(JOB) SP STREAM,S.STREAM,.SWDEC##,,FS.VRQ
SWT(ALL) SP SUMMARY,S.SUMMARY,$SUMMARY,SUM,FS.NFS!FS.HEL
SWT(STR) SP STRUCTURE,<POINT ^D65-2,S.STRU>,$NAMEW,,FS.VRQ!FS.HEL
SWT(JOB) SL SWAP,S.SWAP,SWAP,,FS.NFS!FS.VRQ
IFN FTTUFTS,<
SWT(JOB) SS SYSTEM,S.CLASS,CL$SYS,
>
SWT(ALL) SN TITLES,S.TITLES,FS.NFS
SWT(ALL) SN TOTALS,S.TOTALS,FS.NFS
SWT(NOD) SN TSK,S.TSK,
SWT(<JOB,LIN>) SS TSN,S.APC,.TOTSN
SWT(<JOB,LIN>) SP TTY,S.TTY,$TTY,TTY,FS.LRG!FS.HEL
SWT(NOD) SN TTY,S.TTY,
SWT(<LIN,NOD>) SP TYPE,<POINT ^D65-2,S.TYPE>,$NAMEW,,FS.VRQ!FS.HEL
SWT(UNI) SP UNIT,<POINT ^D65-2,S.UNIT>,$NAMEW,,FS.VRQ!FS.HEL
SWT(LIN) SN USER,S.USER
SWT(JOB) SP VCORE,<POINT ^D65-2,S.VCORE>,$CORE,,FS.VRQ!FS.HEL
SWT(ALL) SS *VFAST,S.FORMAT,%VFAST,
SWT(JOB) SN VM,S.VM
IFN FTIPC,<
SWT(JOB) SN WHEELED,S.WHEEL,FS.NFS
>;END IFN FTIPC
SWT(JOB) SP WSCODE,<POINT ^D65-2,S.WSCODE>,.SIXQW##,,FS.VRQ
SWT(JOB) SL WTO,S.WTO,WTO,PD.WTO,
SWT(LIN) SL XMTSPEED,S.XMTSPEED,SPD,,FS.VRQ
>
SUBTTL SCAN switches -- Keyword values
KEYS (DDB,<FAST,NORMAL,SLOW,VFAST>)
GKEYS (FOR,<FIX,FLOAT,BLANK,DEFAULT>)
KEYS (GOP,<NONE,SYSTEM,HOST,REMOTE>)
GOKEYS (IFM,<ACCOUNT,TMPCOR,CHANNEL,PATH,ORIGIN,DDBS,SPOOL,IPCF,JSL,LOGICAL,TTY,SIZE,BATCH,PRIVILEGES,MTA,DEFAULTS,CAPABILITIES,TIME,CORE,WSCODE,STATE,WATCH,NAME>)
GOKEYS (INC,<FUNNY,PTY>)
GKEYS (NET,<DISCONNECT,CONNECT>)
KEYS (OPR,<NO,YES,LOCAL,REMOTE>)
KEYS (SRV,<IPCF,ANF10,DECNET>)
IFN FTIPC,<
IFE FTMDC,<
GOKEYS (PR,<IPCF,DISK,METER,POKE,CPU,HPQ,UNSPOOL,ENQ,RTTRP,LOCK,TRPSET,SPYALL,SPYMON,NETEXAM,CHGPPN>)
>
>
IFN FTMDC,<
GOKEYS (PR,<IPCF,DISK,METER,POKE,CPU,HPQ,UNSPOOL,ENQ,RTTRP,LOCK,TRPSET,SPYALL,SPYMON,NETEXAM,CHGPPN,SETP,PRGRUN>)
>
IFN FTTUFTS,<
GOKEYS (PR,<IPCF,DISK,METER,POKE,CPU,HPQ,UNSPOOL,ENQ,RTTRP,LOCK,TRPSET,SPYALL,SPYMON,NAME,PPASS,SPASS,MAIL,SFD,COMBO,MAGTAPE>)
>
IFE FTIPC!FTTUFTS!FTMDC,<
GOKEYS (PR,<IPCF,DISK,METER,POKE,CPU,HPQ,UNSPOOL,ENQ,RTTRP,LOCK,TRPSET,SPYALL,SPYMON>)
>
KEYS (SPD,<50,75,110,134,150,200,300,600,1200,1800,2400,4800,9600,EXTA,EXTB>)
GKEYS (ST,<RUN,CMDWAIT,MONERR,LOCK,SWAP,JACCT,DCORE,OPRWAIT,XONLY,DSKFUL>)
OKEYS (STA,<ACTIVE,SWAP,LOCK,STOP,RUN,EVENTWAIT,IOWAIT,SLEEP>)
GKEYS (SWAP,<FORCE,FIT,IN,OUT>)
KEYS (WTO,<ALL,WTO,NONE>)
PD.GOP==:777
PD.WTO==:777
PD.DDB==:777
DM COL,^D132,0,2
DM CRS,.FXLEN,.FXLEN,.FXLEN
DM DDB,.FXDIM+1,.FXDIM+1,.FXDIM+1
DM JOB,777,1,1
DM REP,^D3600,0,^D10
DM SUM,77777,0,77777
DM DPY,^D3600,0,^D10
DM TTY,.INFIN,0,'TTY'
DM DET,.INFIN,0,'DET'
DM PTY,.INFIN,0,'PTY'
DM HPQ,17,0,777777
DM DPR,3,0,777777
DM LOC,177,0,777
INTERN PD.HPQ,PD.DPR,PD.LOC,PD.SUM
DM CLS,^D32,0,0
IFN FTIPC,<
DM CAT,777,0,0
DM SLT,777,0,0
>;END IFN FTIPC
DM CTL,^D512,0,0
DM SRV,0,SRVANF10,0
SUBTTL SCAN switches -- Expansion of switches
;The following set of macros will define a separate switch table of the
;form Sxxx. where xxx is the three letter mode abbreviation defined for
;each mode in the MODES macro in WHOMAC.MAC. The SWTCHS macro is the
;master list of all the switches, in a format suitable for SCANs
;DOSCAN macro. However, only the switches specified for each mode will
;be assembled in each independent switch table. This is done by
;defining the SWTS macro to be either <null> to include this switch in
;this expansion of the table, or <;> to not include this switch.
;If an argument in the SWTS macro matchs the current mode we are
;building switch tables for, that switch is included.
DEFINE XX(MOD,ABR,MAP,TXT,ERR),<
DEFINE SWT(ARG),<
..FLAG==0
IRP ARG,<
IFIDN <ARG><ABR>,<..FLAG==1>
IFIDN <ARG><ALL>,<..FLAG==1>
>;END IRP
IFE ..FLAG,<;>>;END DEFINE SWT
PAGE
SUBTTL SCAN switch expansions -- 'ABR mode
DOSCAN (S'ABR'.)
>;END DEFINE XX
MODES
SUBTTL SCAN switches -- Global switch storage and defaults
DEFINE GSWTCH,<
;;
;; Switch name Number Default Initial
;; of value value
;; words
;;
GS APPEND , ,NO ,
GS CRASH ,MX.CRS , ,0
GS COLUMN , ,1 ,
GS DFORMAT , ,FORDEFAULT,
GS DPY ,2 , ,
GS FINAL , , ,0
GS FORCE , , ,
GS INCLUDE , , ,0
GS INCREMENTAL , ,NO ,
GS INITIAL , , ,0
GS INPUT ,LN$SND , ,0
GS KNOWN , ,NO ,
GS MONITOR , , ,
GS MPERFORMANCE , ,NO ,
GS NETWORK , , ,
GS OUTPUT ,LN$SND , ,0
GS PRINT , ,YES ,
GS REACHABLE , ,YES ,
GS REPEAT ,2 , ,
GS SEND ,LN$SND , ,0
IFN FTSERV,<
GS SERVER ,.SVMAX , ,
> ;END IFN FTSERV
GS SORT ,3 , ,
GS STAMP , ,NO ,
GS SUMMARY , , ,
GS TITLES , ,YES ,
GS TOTALS , ,NO ,
>
DOGSWT
SUBTTL SCAN switches -- File specific switch storage and defaults
DEFINE FSWTCH,<
IFN FTLGNQ,<
FS LOGINQ ,LQP , ,
> ;END IFN FTLGNQ
FS STREAM ,BSN , ,
FS DDT ,DDT , ,
FS PFH ,PFH , ,
FS PERFORMANCE,PRF ,NO ,
FS MAP ,MAP ,NO ,
FS FORMAT ,FMT ,%NORMAL,
FS $$$$$$ ,PFM , ,
FS INFORM ,<INM,INF> , ,0
FS GLXOPR ,GOP , ,
FS WTO ,WTO , ,
FS SLAVE ,SLV , ,
FS MIC ,MCL , ,
FS VM ,VM , ,
FS LCAL ,LCL , ,
FS CORE ,<CRL,CRH> , ,
FS VCORE ,<VCL,VCH> , ,
FS ASSIGN ,TAC , ,
FS INTED ,TAP , ,
FS HANGUP ,HNG , ,
FS CARRIER ,DSC , ,
IFN FTPOWER,<
FS POWER ,POW , ,
>
FS TYPE ,<TYP,TYM> , ,
FS XMTSPEED,TSP , ,
FS RCVSPEED,RSP , ,
FS RSINCE ,RSN , ,
FS RBEFORE ,RBF , ,
FS PRGRUN ,<PTR,PTM> , ,
FS SPEED ,SPD , ,
FS NODE ,<NNM,NOM,NLN> , ,
FS TTY ,<TTY,TTM> , ,
FS %%%%%% ,<TTA> , ,
FS PROGRAM ,<PRG,PRM> , ,
FS SEGMENT ,<HSN,SEM> , ,
FS PPN ,<PPN,PPM> , ,
FS JOB ,JOB , ,
FS HPQ ,HPQ , ,
FS ACTIVE ,ACT , ,
FS CLASS ,CLS , ,
FS DSKPRI ,DPR , ,
FS DEVICE ,DEV , ,
FS MOUNT ,MOU , ,
FS WSCODE ,<WSC,QQQ> , ,
FS STATE ,STA , ,0
FS CTLPRG ,<CPN,CPM> , ,
FS CTLJOB ,CJN , ,
FS BATCH ,BJB , ,
FS BBATCH ,BBB , ,
FS SELF ,SLF , ,
FS NAME ,<NAM,NA1,NMM,NM1>, ,
FS USER ,TCJ , ,
FS DDB ,<DDB,DD1,DD2,DD3,DD4,DD5,DD6,DD7>, ,0
FS OPERATOR,OPR , ,
FS LOCATE ,<LOC,LO1,LO2,LO3,LMC,LM1,LM2,LM3>, ,
FS ACCOUNT ,<ACC,AC1,AC2,AC3,AC4,AC5,AC6,AC7,ATM,AM1,AM2,AM3,AM4,AM5,AM6,AM7>, ,
FS APC ,APC , ,
FS ORIGIN ,ORI ,NO ,
FS DDBS ,DBS , ,
FS REMOTE ,RMT , ,
FS PRIVILEGE,<PRV,PVM> , ,0
FS CAPABILITY,<CAP,CAM> , ,0
FS JSTATUS ,JST , ,0
FS SWAP ,SWP , ,
FS HEADING ,HEA , ,0
FS FOOTING ,FOO , ,0
FS CHARGE ,<CNO,CHM> , ,
IFN FTIPC,<
FS CATEGORY,CAT , ,
FS SLOT ,SLT , ,
FS PIVOT ,PVT , ,
FS WHEEL ,WHL , ,
FS LPPN ,<LPN,LPM> , ,
FS CID ,<CID,CIM> , ,
FS BADGE ,BDG , ,
>
IFN FTMDC,<
FS SETP ,STP , ,
>;END IFN FTMDC
FS CDP ,CDP , ,
FS CDR ,CDR , ,
FS DDP ,DDP , ,
FS DTA ,DTA , ,
FS LPT ,LPT , ,
FS MCR ,MCR , ,
FS MTA ,MTA , ,
FS PLT ,PLT , ,
FS PTP ,PTP , ,
FS PTR ,PTR , ,
FS RDA ,RDA , ,
FS TSK ,TSK , ,
FS PASSWORD,<PSW,PSM> , ,
FS STRUCTURE,<STN,STM> , ,
FS UNIT ,<UNN,UNM> , ,
>
DOFSWT
.FZSNC==:.FXSNC
.FZBFR==:.FXBFR
SUBTTL SCAN Blocks
ISBLK:: IOWD MON.L,MON.T ;POINT TO MONITOR COMMANDS
XWD OFFSET##,'WHO' ;STARTING OFFSET,,MY PREFIX
XWD CHRINP##,.TOCHR## ;TYPE-IN AND TYPE-OUT ROUTINES
0 ;..
XWD PROMPT,MONRET ;PROMPT AND EXIT ROUTINES
FS.IFL!FS.INC!FS.STK ;NO CORE UUO,SUPPRESS STICKY DEFAULTING
;INDIRECT ILLEGAL IF NOT LOGGEN
LN$IBLK==:.-ISBLK
INTERN MON.L,MON.T
DEFINE XX(MOD,ABR,MAP,TXT,ERR),<
T'ABR: IOWD S'ABR'.L,S'ABR'.N
XWD S'ABR'.D,S'ABR'.M
EXP S'ABR'.P
EXP -1
XWD CLRANS,CLRFIL
XWD AIN,AOUT
0;; XWD MEMSTK,APPSTK
XWD CLRSTK,FS.MIO
LT'ABR==.-T'ABR
O'ABR: IOWD S'ABR'.L,S'ABR'.N
XWD S'ABR'.D,S'ABR'.M
EXP S'ABR'.P
EXP -1
IFIDN <ABR><JOB>,<
XWD 2,[EXP SIXBIT/WHO/,SIXBIT/JOB/]
>;END IFIDN
IFDIF <ABR><JOB>,<
EXP SIXBIT/MOD/
>;END IFDIF
LO'ABR==.-O'ABR
>;END DEFINE XX
MODES
DEFINE XX(MOD,ABR,MAP,TXT,ERR),<XWD LT'ABR,T'ABR>
TBLKX:: MODES
DEFINE XX(MOD,ABR,MAP,TXT,ERR),<XWD LO'ABR,O'ABR>
OBLKX:: MODES
SUBTTL Prompt and exit routines
PROMPT: TLNE F,(FL.WHOSRV) ;ARE WE A SERVER?
POPJ P, ;YES--NEVER PROMPT
SKIPGE T1 ;SEE IF CONTINUATION
MOVEI T1,"#" ;YES--SET CODE
OUTCHR T1 ;TYPE PROMPT
POPJ P, ;AND RETURN
MONRET: TLNE F,(FL.WHOSRV) ;ARE WE A SERVER?
PJRST SRVXIT## ;YES--SPECIAL HANDLING
PUSHJ P,.CCLRB## ;CONDITIONALLY CLEAR TYPE-AHEAD
PUSHJ P,.KLIND## ;CLEAR INDIRECT STUFF
PJRST .MNRET## ;LET SCAN FINISH UP
SUBTTL Switch scanning routines -- $MONITOR - Reset /CRASH
[ASCIZ/Reset CRASH switch/]
$MONITOR:
CAIN C,":" ;A MODIFIER?
$FATAL (NMA,<No modifier allowed on switch MONITOR>)
PUSHJ P,MAPMON## ;SETUP FOR MONITOR MAPPING
JRST .SWDON## ;RETURN W/O STORE
SUBTTL Switch scanning routines -- $CRASH - Read a crash filespec
; This routine will read in a crash filespec and apply defaults if
; necessary. The default filespec is DSK:CRASH.EXE for compatibility
; with SYSTAT
[ASCIZ/Monitor crash filespec/]
$CRASH: PUSHJ P,.SWFIL## ;GET A FILESPEC
JFCL ;CAN'T GET HERE (I DON'T THINK)
MOVEI T1,S.CRASH ;POINT TO SCAN BLOCK
MOVE T2,.FXMOD(T1) ;GET FLAGS
DMOVE T3,[EXP <'CRASH '>,-1] ;GET DEFAULT FILE NAME AND MASK
SKIPN .FXNAM(T1) ;HAVE ONE?
DMOVEM T3,.FXNAM(T1) ;NOW WE DO
HRLOI T3,'EXE' ;GET DEFAULT EXTENSION AND MASK
SKIPN .FXEXT(T1) ;HAVE AN EXTENSION
MOVEM T3,.FXEXT(T1) ;YES--SET DEFAULTS
MOVEI T2,CRSOPN ;OPEN BLOCK
MOVEI T3,CRSLOK ;LOOPUP BLOCK
PUSHJ P,.STOPN## ;CONVERT SCAN BLOCK
$FATAL (NWC,<No wildcarding crash specification>)
MOVE T1,[POINT 7,CRSFIL] ;BYTE POINTER TO STORE TEXT
MOVEM T1,CRSPTR ;SAVE IT
MOVEI T1,CRSCHR ;GET OUR CHARACTER TYPER
PUSHJ P,.TYOCH## ;TELL SCAN
PUSH P,T1 ;SAVE IT
MOVEI T1,CRSOPN ;OPEN BLOCK
MOVEI T2,CRSLOK ;LOOKUP BLOCK
PUSHJ P,.TOLEB## ;TYPE OPEN/LOOKUP BLOCK
MOVEI T1,0 ;TERMINATE
PUSHJ P,CRSCHR ;..
POP P,T1 ;GET OLD CHAR TYPER
PUSHJ P,.TYOCH## ;RESTORE IT
PUSHJ P,MAPCRS## ;SETUP FOR CRASH FILE MAPPING
JRST .SWDON## ;RETURN W/O STORE
CRSCHR: IDPB T1,CRSPTR ;STORE CHARACTER
POPJ P, ;AND RETURN
SUBTTL Switch scanning routines -- $NAMEW - Read a wildcarded SIXBIT word
[ASCIZ/Wildcarded SIXBIT word/]
$NAMEW: PUSHJ P,.NAMEW## ;READ WILD NAME
NAME.1: PUSHJ P,.LEFTX## ;POSITION
JUMPE N,E.SVR## ;CANT BE NULL
MOVEM N,.NMUL## ;STORE NAME
MOVEM T1,.NMUL##+1 ;STORE MASK
POPJ P, ;AND RETURN
SUBTTL Switch scanning routines -- $PPN - Read a wildcarded PPN
[ASCIZ/Wildcarded PPN word/]
$PPN: PUSHJ P,.TIAUC## ;GET A CHAR
CAIE C,"[" ;MUST BE [
$FATAL (IPF,<Illegal PPN format>)
PUSHJ P,.SAVE2## ;SAVE P1,P2
PUSHJ P,.NOCTW## ;READ OCTAL NUMBER
PUSHJ P,.LEFTX## ;MOVE TO LEFT HALF
TRNE N,-1 ;SEE IF TOO BIG
JRST E$$IPF ;YES
HLLZ P1,N ;SAVE NUMBER
HLLZ P2,T1 ;AND MASK
CAIE C,"," ;SEE IF COMMA
JRST E$$IPF ;NO
JUMPN P1,PPN.1 ;SEE IF GIVEN
HLLZ P1,.MYPPN## ;NO--DEFAULT MY PROJECT
HRLZI P2,-1 ;AND MASK
PPN.1: PUSHJ P,.NOCTW## ;READ OCTAL NUMBER
PUSHJ P,.LEFTX## ;MOVE TO LEFT HALF
TRNE N,-1 ;SEE IF TOO BIG
JRST E$$IPF ;YES
JUMPN N,PPN.2 ;SEE IF PROGRAMMER
HRLZ N,.MYPPN## ;NO--DEFAULT MY PROGRAMMER
HRLI T1,-1 ;AND MASK
PPN.2: HLR P1,N ;SAVE NUMBER
HLR P2,T1 ;AND MASK
CAIN C,"]" ;TERMINATE OK?
PUSHJ P,.TIAUC## ;YES--GET NEXT CHAR
MOVEM P1,.NMUL## ;SAVE NUMBER
MOVEM P2,.NMUL##+1 ;AND MASK
POPJ P,
SUBTTL Switch scanning routines -- $CORE - Read a core specification
[ASCIZ/Min:Max Core words/]
$CORE: MOVX T1,.INFIN ;GET INFINITY
MOVEM T1,.NMUL##+1 ;SAVE AS MAX
PUSHJ P,.COREW## ;READ CORE VALUE
PUSH P,N ;SAVE IT
CAIE C,":" ;MORE COMING?
JRST CORE.1 ;NO
PUSHJ P,.COREW## ;READ NEXT CORE VALUE
MOVEM N,.NMUL##+1 ;STORE
CORE.1: POP P,N ;RESTORE FIRST ARG
MOVEM N,.NMUL## ;STORE
POPJ P, ;AND RETURN
SUBTTL Switch scanning routines -- $NODE - Read a wildcarded node name
[ASCIZ"Wildcarded node name/number_line"]
$NODE: PUSHJ P,$NAMEW ;READ WILDCARDED SIXBIT NODE
SETOM .NMUL##+2 ;CLEAR /LINE
CAIE C,":" ;MORE COMING?
CAIN C,"_" ;..
CAIA ;YES
POPJ P, ;NO--RETURN
PUSH P,.NMUL## ;.OCTNW ZAPS IT
PUSHJ P,.OCTNW## ;READ LINE
MOVEM N,.NMUL##+2 ;STORE
POP P,.NMUL## ;GET IT BACK
POPJ P, ;AND RETURN
SUBTTL Switch scanning routines -- $PHONE - Read a phone number string
[ASCIZ/"Phone number string"/]
$PHONE: MOVEI T1,.TODSD
MOVEM T1,S.APC ;FORCE /DIAL
PJRST .ASCQW## ;AND READ ASCII STRING
SUBTTL Switch scnanning routines -- $SERVER - Read /SERVER arguments
IFN FTSERV,<
[ASCIZ/node:[connect-type]:[timeout]/]
$SERVER:PUSHJ P,$NAMEW ;GET NODE NUMBER OR NAME
AOSE .NMUL##+1 ;CHECK FOR WILDCARDS
$FATAL (SCW,</SERVER node argument cannot be wild>)
PUSH P,.NMUL## ;SAVE IT
PUSH P,[EXP -1] ;DEFAULT CONNECT TYPE
PUSH P,[EXP -1] ;DEFAULT TIMEOUT
CAIE C,":" ;CONNECT TYPE ON THE WAY?
JRST SERV.2 ;NO--MUST DEFAULT IT
PUSHJ P,.SIXSW## ;GET KEYWORD
JUMPE N,SERV.1 ;HAVE A KEYWORD?
MOVE T1,[IOWD SRV.L,SRV.T] ;POINT TO TABLES
PUSHJ P,LKNAM## ;LOOKUP
MOVEM T1,-1(P) ;SAVE TABLE INDEX
SERV.1: CAIE C,":" ;TIMEOUT ARGUMENT?
JRST SERV.2 ;NO
PUSHJ P,.DECNW## ;GET TIMEOUT IN SECONDS
CAIG N,.TSTMX ;CAN'T BE GREATER THAN MAXIMUM
CAIGE N,0 ; BUT NOT NEGATIVE
$FATAL (STO,<Server timeout value out of range >,E.STO)
MOVEM N,0(P) ;SAVE ARG
SERV.2: POP P,.NMUL##+.SVTIM ;RESTORE TIMEOUT
POP P,.NMUL##+.SVTYP ;RESTORE CONNECT TYPE
POP P,.NMUL##+.SVNOD ;RESTORE NODE NAME/NUMBER
SETZM .NMUL##+.SVFLG ;INDICATE SOMETHING TYPED
JRST .SWDPB## ;RETURN AND STORE
E.STO: MOVEI T1,.TSTMN ;GET MINIMUM TIMEOUT VALUE
PUSHJ P,.TDECW## ;TYPE IT
PUSHJ P,.TDASH## ;SEPARATOR
MOVEI T1,.TSTMX ;GET MAXIMUM
PJRST .TDECW## ;TYPE IT AND RETURN
> ;END FTSERV
SUBTTL Switch scanning routines -- $SORT - Read a sort specification
[ASCIZ/KEY:[A|D]:[number]/]
$SORT: PUSHJ P,.SIXSW## ;GET THE KEYWORD
MOVE T1,ISRTX(M) ;POINT TO TABLE
PUSHJ P,LKNAM## ;LOOKUP
ADD T1,ASRTX(M) ;FIXUP OFFSET
PUSH P,T1 ;SAVE INDEX
SETZM .NMUL##+1 ;DEFAULT ASCEDNING
MOVX T1,.INFIN ;GET INFINITY
MOVEM T1,.NMUL##+2 ;DEFAULT INFINIATE COUNTER
CAIE C,":" ;MORE COMING?
JRST SORT.1 ;NO
PUSHJ P,.TIAUC## ;PRIME THE PUMP
CAIL C,"0" ;DIGIT?
CAILE C,"9" ;..
JRST SORT.2 ;NO--CHECK FOR KEYWORD
PUSHJ P,.DECNC## ;READ THE NUMBER
MOVEM N,.NMUL##+2 ;STORE COUNT
JRST SORT.1 ;AND EXIT
SORT.2: PUSHJ P,.SIXSC## ;READ KEYWORD
MOVE T1,[IOWD 2,[SIXBIT/ASCEND/]
[SIXBIT/DESEND/] ]
PUSHJ P,LKNAM ;LOOKUP NAME
MOVEM T1,.NMUL##+1 ;SAVE MODE
CAIE C,":" ;COUNT COMING?
JRST SORT.1 ;NO--EXIT
PUSHJ P,.DECPW ;YES--READ COUNT
MOVEM N,.NMUL##+2 ;STORE
SORT.1: POP P,T1 ;RESTORE KEYWORD INDEX
MOVEM T1,.NMUL## ;SAVE
JRST .SWDPB## ;RETURN AND STORE
SUBTTL Switch scanning routines -- $SUMMARY - Read a summary keyword
[ASCIZ/keyword/]
$SUMMARY:PUSHJ P,.SIXSW## ;GET THE KEYWORD
MOVE T1,ISUMX(M) ;POINT TO TABLE
PUSHJ P,LKNAM## ;LOOKUP
ADD T1,ASUMX(M) ;FIXUP OFFSET
MOVEI N,(T1) ;COPY FOR SCAN
JRST .SWDPB## ;AND RETURN
SUBTTL Switch scanning routines -- $REP - Read a repeat time and count
[ASCIZ/sleep-time:repeat-count/]
$REP: PUSHJ P,.DECPW ;GET A NUMBER
PUSH P,N ;SAVE A MOMENT
MOVX N,.INFIN ;A BIG REPEAT TIME
CAIN C,":" ;MORE COMING?
PUSHJ P,.DECPW ;YES
MOVEM N,.NMUL##+1 ;STORE REPEAT TIME
POP P,.NMUL## ;AND SLEEP TIME
JRST .SWDPB## ;AND GO STORE
SUBTTL Switch scanning routines -- $TTY, $PTY, $DET - Read terminal specifications
[ASCIZ/Terminal specification/]
$DET: MOVEI T1,2
JRST TTY.1
[ASCIZ/Terminal specification/]
$PTY: MOVEI T1,1
JRST TTY.1
[ASCIZ/Terminal specification/]
$TTY: MOVEI T1,0
TTY.1: PUSHJ P,.SAVE1## ;SAVE P1
MOVEI P1,(T1) ;SAEV INDEX
PUSHJ P,.TIAUC## ;GET ACHAR
CAIL C,"0" ;SEE IF IF DIGIT
CAILE C,"7" ;..
PJRST .SIXSC## ;NO--READ SIXBIT AND RETURN
PUSHJ P,.OCTNC## ;YES--READ AS OCTAL
MOVEI T1,(N) ;COPY TO T1
PUSHJ P,TTYNNN ;MAKE NNN IN SIXBIT
HLL T1,[SIXBIT/TTY/
SIXBIT/PTY/
SIXBIT/DET/](P1) ;FORM FULL DIRE
MOVE N,T1 ;RETURN IN "N"
POPJ P, ;AND RETURN
SUBTTL Switch scanning routines -- $DISK - Read disk priority
[ASCIZ/Decimal number (max=3)/]
$DISK: PUSHJ P,.DECNW## ;GET A NUMBER
MOVM T1,N ;ABSOLUTE VALUE
CAIL T1,<1_<WID(JS.PRI)-1>> ;RANGE TEST
JRST E.SVTL## ;NO--TOO LARGE
ADDI N,<1_WID(JS.PRI)> ;MAKE NON-NEGATIVE
JRST .SWDPB## ;AND STORE
SUBTTL Switch scanning routines -- $FORCE - Read a forced command
[ASCIZ/Forced command name/]
$FORCE: MOVEI N,0 ;CLEAR WORD
MOVE T1,[POINT 6,N] ;SETUP POINTER TO IT
FORC.1: PUSHJ P,.TIAUC## ;GET A CHAR
PUSHJ P,.TICAN## ;SEE IF ALPHA-NUMERIC
CAIN C,"." ;OR DOT
CAIA ;LOOKS GOOD
JRST .SWDPB## ;NO--ALL DONE
SUBI C," "-' ' ;CONVERT TO SIXBIT
TLNE T1,770000 ;POINTER FULL?
IDPB C,T1 ;NO--STORE
JRST FORC.1 ;AND LOOP
SUBTTL Switch scanning routines -- $MODE - Read /MODE specifier
$MODE: PUSHJ P,.SIXSW## ;GET THE KEYWORD
MOVE T1,[IOWD MON.L,MON.T] ;POINT TO TABLES
PUSHJ P,LKNAM## ;LOOKUP
PUSHJ P,SETMOD## ;SET UP AC 'M'
JRST .SWDON## ;AND RETURN
SUBTTL Switch scanning routines -- CACHE - Read blocks to cache
$CACHE: PUSHJ P,.DECNW## ;READ NUMBER
MOVEM N,S.CACHE ;SAVE IT
JRST .SWDON## ;RETURN W/O STORE
SUBTTL Switch scanning routines -- .DECPW - Read positive decimal number
.DECPW::PUSHJ P,.DECNW## ;READ SIGNED NUMBER
JUMPL N,E.SVNG## ;ERROR IF NEGATIVE
POPJ P, ;ELSE RETURN
SLIFM: MOVEI T1,S.INFORM
PJRST SLKEY
SLCAP: SKIPA T1,[S.CAPABILITY]
SLPRV: MOVEI T1,S.PRIVILEGE
SLKEY: CAMN N,[-1,,0] ;SEE IF "NONE"
JRST SLNONE ;YES
CAMN N,[0,,-1] ;SEE IF "ALL"
JRST SLALL ;YES
SUBI N,1 ;ADJUST TO 0..X
MOVEI T2,1 ;GET A BIT
LSH T2,(N) ;DIAL A BIT
TDNE T2,(T1) ;SEE IF SPECIFIED
$FATAL (DKS,<Duplicate keyword specified>)
IORM T2,(T1) ;NO--SET FOR NEXT TIME
CAIL N,0 ;SEE IF NOxxx
IORM T2,1(T1) ;NO--SET
CAIGE N,0 ;SEE IF NOxxx
ANDCAM T2,1(T1) ;YES--CLEAR
JRST .SWDON## ;AND RETURN
SLNONE: SETZM (T1) ;CLEAR ALL BITS
SETZM 1(T1) ;..
JRST .SWDON## ;AND RETURN
SLALL: SETOM (T1) ;SET ALL BITS
SETOM 1(T1) ;..
JRST .SWDON## ;AND RETURN
GLOB E$$DSI
$FATAL (DSI,<Double switch illegal >,.TSIXN##)
SUBTTL Defaulting -- Scan specifications
WHOSCN::SETZM I.PREV ;NO PREVIOUS SPEC YET
PUSHJ P,S$FIRST## ;POSITION TO FIRST SCAN SPEC
SCNLOP: MOVEI T1,(I) ;POINT TO SCAN SPEC
MOVEI T2,.FZLEN ;GET LENGTH OF SPEC
PUSHJ P,.OSDFS## ;APPLY SWITCH.INI DEFAULTS
MOVEI T1,(I) ;POINT TO SCAN SPEC
PUSHJ P,APOFIL ;APPLY SWITCH.INI FILE SWITCHES
PUSHJ P,@SCNXXX##(M) ;DO MODE SPECIFIC DEFAULTS
SKIPN T1,I.PREV ;GET PREVIOUS SCAN BLOCK
JRST SCNNXT ;FIRST TIME THROUGH
MOVE T2,.FZFMT(T1) ;GET PREVIOUS SPECS /FORMAT
SKIPGE .FZFMT(I) ;THIS SPEC HAVE /FORMAT?
MOVEM T2,.FZFMT(I) ;NO--DEFAULT FROM PREVIOUS
MOVE T2,.FZPRF(T1) ;GET PREVIOUS SPECS /PERFORMANCE
SKIPGE .FZPRF(I) ;THIS SPEC HAVE /PERFORMANCE?
MOVEM T2,.FZPRF(I) ;NO--DEFAULT FROM PREVIOUS
MOVE T2,.FZDBS(T1) ;GET PREVIOUS SPECS /DDBS
SKIPGE .FZDBS(I) ;THIS SPEC HAVE /DDBS?
MOVEM T2,.FZDBS(I) ;NO--DEFAULT FROM PREVIOUS
MOVE T2,.FZMAP(T1) ;GET PREVIOUS SPECS /MAP
SKIPGE .FZMAP(I) ;THIS SPEC HAVE /MAP?
MOVEM T2,.FZMAP(I) ;NO--DEFAULT FROM PREVIOUS
SKIPE .FZINM(I) ;THIS SPEC HAVE /INFORMATION?
JRST SCNNXT ;YES--LEAVE ALONE
MOVE T2,.FZINM(T1) ;NO--DEFAULT FROM PREVIOUS SPEC
MOVEM T2,.FZINM(I) ;..
MOVE T2,.FZINF(T1) ;..
MOVEM T2,.FZINF(I) ;..
SCNNXT: MOVEM I,I.PREV ;SAVE PREVIOUS SCAN SPEC
MOVEI T1,(I) ;POINT TO SCAN SPEC
PUSHJ P,APPFIL ;APPLY FILE DEFAULTS
PUSHJ P,S$NEXT## ;GET NEXT SCAN SPEC
POPJ P, ;ALL DONE
JRST SCNLOP ;AND LOOP
SUBTTL Defaulting -- Switch defaults
SWTDEF::MOVEI T1,NO ;GET /NOPRINT
SKIPGE S.PRINT ;SEE IF PRINT GIVEN
SKIPGE S.SUMMARY ;NO--SEE IF /SUMMARY
CAIA
MOVEM T1,S.PRINT ;YES-STORE /NOPRINT
SKIPL T1,S.DPY ;SEE IF /DPY
MOVEM T1,S.REPEAT ;STORE AS /REPEAT
SKIPL T1,S.DPY+1 ;..
MOVEM T1,S.REPEAT+1 ;..
MOVE T1,S.COLUMN ;GET /COLUMN
CAIGE T1,1 ;INSURE AT LEAST 1
MOVEI T1,1 ;NOPE
MOVEM T1,S.COLUMN ;AND STORE
SKPYES S.STAMP ;SEE IF /STAMP
JRST SWTD.1 ;NO
SKIPE S.INITAL ;SEE IF /INITIAL
$FATAL (SII,</STAMP illegal with /INITIAL>)
MOVE T1,[LSTAMNORMAL##,,FSTAMNORMAL##] ;GET /STAMP FORMAT
MOVEM T1,S.INITAL ;SAVE AS /INITIAL
SWTD.1: PUSHJ P,S$FIRST## ;POSITION TO FIRST SCAN SPEC
SWTD.2: PUSHJ P,SETFC ;SET FORMAT SWITCH FOR COMMAND
PUSHJ P,S$NEXT## ;GET NEXT SCAN SPEC
PJRST APPGLB ;DONE--DEFAULT GLOBALS AND RETURN
JRST SWTD.2 ;AND LOOP
SUBTTL Defaulting -- Format switch
SETFC:: SKIPGE T1,.FZFMT(I) ;GET FORMAT SWITCH
JRST SETFM ;NONE SPECIFIED
TLNE T1,-1 ;SEE IF COUNT IN LH
JRST SETFM1 ;YES--USE USERS FORMAT
SETFM:: SKIPLE T1,.FZFMT(I) ;GET FORMAT SWITCH
TLNE T1,-1 ;SEE IF USER COUNT
MOVEI T1,%NORMAL ;FORCE NORMAL
MOVE T1,@FORTAB(M) ;LOAD DEFAULT FORMAT FOR MODE
SETFM1: MOVEM T1,.FZPFM(I) ;SAVE PRINT FORMAT
POPJ P, ;AND RETURN
SUBTTL Defaulting -- Output specification defaults
OUTDEF::
IFN FTSERV,<
TLNE F,(FL.WHOSRV) ;ARE WE A SERVER?
PJRST SRVDEF## ;YES--FIX UP OUTPUT FILESPEC ELSEWHERE
> ;END IFN FTSERV
MOVEI T1,O.SPEC ;POINT TO OUTPUT SPEC
MOVEI T2,.FZLEN ;INDICATE LENGTH
PUSHJ P,.OSDFS## ;APPLY SWITCH.INI DEFAULTS
MOVSI T1,'TTY' ;DEFAULT TTY:
SKIPN O.SPEC+.FXDEV ;SEE IF DEVICE
MOVEM T1,O.SPEC+.FXDEV ;NO--STORE DEFAULT
SKIPN O.SPEC+.FXNAM ;SEE IF NAME
SETOM O.SPEC+.FXNMM ;NO--MARK NOT WILD
MOVE T1,[SIXBIT/WHO/] ;GET DEFAULT NAME
SKIPN O.SPEC+.FXNAM ;SEE IF GIVEN
MOVEM T1,O.SPEC+.FXNAM ;NO--STORE DEFAULT
HRLOI T1,'LST' ;GET DEFAULT EXTENSION
SKIPN O.SPEC+.FXEXT ;SEE IF GIVEN
MOVEM T1,O.SPEC+.FXEXT ;NO--STORE DEFAULT
MOVE T1,.JBVER ;GET OUR VERSION
SKIPGE O.SPEC+.FXVER ;SEE IF /VERSION
MOVEM T1,O.SPEC+.FXVER ;NO--DEFAULT OURS
MOVE T1,[.FZLEN,,O.SPEC] ;POINT TO OUTPUT SPEC
MOVEI T2,O.OPEN## ;POINT TO OPEN BLOCK
MOVE T3,[LN$LEN,,O.ENTER##] ;POINT TO ENTER BLOCK
MOVEI T4,O.PATH## ;POINT TO OUTPUT PATH. BLOCK
PUSHJ P,.STOPB## ;CONVERT SCAN BLOCKS
$FATAL (NWO,<No wildcarding output specification>)
MOVSI T1,'WHO' ;GET PROGRAM NAME
MOVEM T1,O.ENTER##+.RBSPL ;STORE AS SPOOLED NAME
POPJ P, ;AND RETURN
SUBTTL SCAN support -- CLRANS - Clear answers and reset things
CLRANS: TRZ F,-1-FR.OPEN ;CLEAR MOST LOCAL FLAGS
MOVEI T1,.TOCHR## ;SET FOR BUFFERED OUTSTR
TLNN F,(FL.WHOSRV) ;IF NOT WHOSRVER
MOVEM T1,.TOUTZ## ;STORE
PUSHJ P,S$DEALLOC## ;DEALLOCATE SCAN SPECS
PUSHJ P,C$DEALLOC## ;AND PER COMMAND MEMORY STUFF
MOVE T1,[O.SPEC,,O.SPEC+1] ;SET UP BLT
SETZM O.SPEC ;CLEAR FIRST WORD
BLT T1,O.SPEC+.FZLEN-1 ;CLEAR OUTPUT SCAN BLOCK
MOVEI T1,SETBLK ;POINT TO SETUUO ARGS BLOCK
MOVEM T1,SETPTR ;STORE
SETZM SETCNT ;NO SET UUO ARGS YET
PJRST CLRGLB ;CLEAR GLOBALS AND RETURN
SUBTTL SCAN support -- AOUT - Allocate an output spec
AOUT: MOVEI T1,O.SPEC ;POINT TO OUTPUT SPEC
MOVEI T2,.FZLEN ;INDICATE LENGTH
PJRST MEMFIL ;COPY FILE SWITCHES AND RETURN
SUBTTL SCAN support -- AIN - Allocate an input spec
AIN:: PUSHJ P,S$ALLOC## ;ALLOCATE A SCAN SPEC
MOVEI T1,(I) ;POINT TO IT
MOVEI T2,.FZLEN ;INDICATE LENGTH
PJRST MEMFIL ;COPY FILE SWITCHES AND RETURN
SUBTTL SCAN support -- CLRSTK - Clear file and sticky switches
CLRSTK::PUSHJ P,.SAVT4## ;SAVE T1-T4
MOVSI T1,-FSWT.L ;GET LENGTH OF FILE SWITCHES
JUMPE T1,CLRS.E ;RETURN IF NONE
CLRS.1: MOVE T2,FSWT.I(T1) ;GET INITIAL VALUE
MOVEM T2,FSWT.S(T1) ;STORE IN SWITCH AREA
MOVEM T2,FSWT.P(T1) ;AND IN STICKY SWITCH AREA
AOBJN T1,CLRS.1 ;AND LOOP FOR ALL
CLRS.E: POPJ P, ;RETURN
SUBTTL SCAN support -- CLRFIL - Clear file switches
CLRFIL: PUSHJ P,.SAVT4## ;SAVE T1-T4
MOVSI T1,-FSWT.L ;GET LENGTH OF FILE SWITCHES
JUMPE T1,CLRF.E ;RETURN IF NONE
CLRF.1: MOVE T2,FSWT.I(T1) ;GET DEFAULT
MOVEM T2,FSWT.S(T1) ;STORE IN FSWT.S## AREA
AOBJN T1,CLRF.1 ;LOOP FOR ALL
CLRF.E: POPJ P, ;RETURN
SUBTTL SCAN support -- MEMSTK - Memorize sticky file switches
MEMSTK: PUSHJ P,.SAVT4## ;SAVE T1-T4
MOVSI T1,-FSWT.L ;GET LENGTH OF FILE SWITCHES
JUMPE T1,MEMS.E ;RETURN IF NONE
MEMS.1: MOVE T2,FSWT.S(T1) ;GET VALUE
CAME T2,FSWT.I(T1) ;SEE IF SET
MOVEM T2,FSWT.P(T1) ;NO--STORE AS STICKY IN FSWT.P##
AOBJN T1,MEMS.1 ;AND LOOP
MEMS.E: POPJ P, ;RETURN
SUBTTL SCAN support -- MEMFIL - Memorize file switches
MEMFIL: PUSHJ P,.SAVT4## ;SAVE T1-T4
MOVSI T3,-FSWT.L ;GET LENGTH FILE SWITCHES
JUMPE T3,MEMF.E ;RETURN IF NONE
MEMF.1: MOVE T4,FSWT.S(T3) ;GET INITIAL VALUE
MOVEM T4,.FXLEN(T1) ;STORE IT
ADDI T1,1 ;ADVANCE TO NEXT SCAN SPEC
AOBJN T3,MEMF.1 ;LOOP FOR ALL SWITCHES
MEMF.E: POPJ P, ;AND RETURN
SUBTTL SCAN support -- APPSTK - Apply sticky file switches
APPSTK: PUSHJ P,.SAVT4## ;SAVE T1-T4
MOVSI T1,-FSWT.L ;GET LENGTH OF FILE SWITCHES
JUMPE T1,APPS.E ;RETURN IF NONE
APPS.1: MOVE T2,FSWT.S(T1) ;GET VALUE FROM FSWT.S AREA
CAMN T2,FSWT.I(T1) ;SEE IF USER GAVE
MOVE T2,FSWT.P(T1) ;NO--USE STICKY VALUE
MOVEM T2,FSWT.S(T1) ;YES--STORE
AOBJN T1,APPS.1 ;LOOP FOR ALL
APPS.E: POPJ P, ;RETURN
SUBTTL SCAN support -- APPFIL - Default file switches
;CALL:
; MOVEI T1,SCAN SPEC BLOCK
; PUSHJ P,APPFIL ;DEFAULT FILE SWITCHES
;USES T1-T4
APPFIL: PUSHJ P,.SAVT4## ;SAVE T1-T4
MOVSI T2,-FSWT.L ;GET LENGTH FILE SWITCHES
JUMPE T2,APPF.E ;RETURN IF NONE
APPF.1: MOVE T3,.FXLEN(T1) ;GET SWITCH VALUE
MOVE T4,FSWT.D(T2) ;GET DEFAULT
CAMN T3,FSWT.I(T2) ;SWITCH GIVEN?
CAMN T4,[-1] ;NO--NO DEFAULT PROVIDED?
SKIPA ;YES
MOVEM T4,.FXLEN(T1) ;NO--STORE DEFAULT
ADDI T1,1 ;ADVANCE TO NEXT SWITCH
AOBJN T2,APPF.1 ;LOOP FOR ALL
APPF.E: POPJ P, ;AND RETURN
SUBTTL SCAN support -- APOFIL - Default SWITCH.INI file switches
APOFIL: PUSHJ P,.SAVT4## ;SAVE T1-T4
MOVSI T2,-FSWT.L ;GET LENGTH FILE SWITCHES
JUMPE T2,APOF.E ;RETURN IF NONE
APOF.1: MOVE T3,.FXLEN(T1) ;GET USER SWITCH VALUE
CAMN T3,FSWT.I(T2) ;SEE IF SWITCH GIVEN
MOVE T3,FSWT.S(T2) ;NO--GET SWITCH.INI VALUE
;(MAY NOT BE SET--APPFIL WILL HANDLE)
MOVEM T3,.FXLEN(T1) ;STORE
ADDI T1,1 ;ADVANCE TO NEXT SWITCH
AOBJN T2,APOF.1 ;LOOP FOR ALL
APOF.E: POPJ P, ;AND RETURN
SUBTTL SCAN support -- CLRGLB - Clear global switches
CLRGLB: PUSHJ P,.SAVT4## ;SAVE T1-T4
MOVSI T1,-GSWT.L ;GET LENGTH GLOBAL SWITCHES
JUMPE T1,CLRG.E ;RETURN IF NONE
CLRG.1: MOVE T2,GSWT.I(T1) ;GET INITIAL VALUE
MOVEM T2,GSWT.S(T1) ;STORE
AOBJN T1,CLRG.1 ;LOOP FOR ALL
CLRG.E: POPJ P, ;AND RETURN
SUBTTL SCAN support -- APPGLB - Default global switches
APPGLB: PUSHJ P,.SAVT4## ;SAVE T1-T4
MOVSI T1,-GSWT.L ;GET LENGTH GLOBAL SWITCHES
JUMPE T1,APPG.E ;RETURN IF NONE
APPG.1: MOVE T2,GSWT.S(T1) ;GET SWITCH VALUE
MOVE T3,GSWT.D(T1) ;GET DEFAULT
CAMN T2,GSWT.I(T1) ;SWITCH GIVEN?
CAMN T3,[-1] ;NO--NO DEFAULT PROVIDED?
SKIPA ;YES
MOVEM T3,GSWT.S(T1) ;NO--STORE DEFAULT
AOBJN T1,APPG.1 ;LOOP FOR ALL
APPG.E: POPJ P, ;AND RETURN
SUBTTL Tables -- Format defaults
DEFINE FORM(LIST),<
IRP LIST,<
..TEMP==..TEMP+1
%'LIST==:..TEMP
EXP SIXBIT /LIST/
>
>
;Generate list of form typeout modes
DEFINE FORMS,<FORM<VFAST,FAST,NORMAL,SLOW>>
..TEMP==0
;Generate SCAN keyword table and keyword symbol values
%.T: FORMS
%.L==.-%.T
DEFINE XX(MOD,ABR,MAP,TXT,ERR),<
DEFINE FORM(LIST),<
IRP LIST,<XWD L'ABR''LIST##, F'ABR''LIST##>
>
ABR'DAT::EXP 0 ;;Illegal
FORMS
>
;Generate format dispatch tables
MODES
XX DDB,DDB,DDBs,<No files> ;Until DDB is a mode
DEFINE XX(MOD,ABR,MAP,TXT,ERR),<ABR'DAT(T1)>
FORTAB: MODES
SUBTTL Tables -- Monitor command interface
..TEMP==-1
DEFINE XX(MOD,ABR,MAP,TXT,ERR),<
EXP SIXBIT/MOD/
M%'MOD==:<..TEMP==..TEMP+1>
>
MON.T: MODES
XX WHO ;Same as JOB mode
XX NETWORK ;Same as NODE mode
MON.L==.-MON.T
SUBTTL Tables -- SUMMARY and SORT keywords
DEFINE X(KEY,TXT,LOD,PRT,WID,RND<1>),<EXP SIXBIT /KEY/>
DEFINE START(X),<
X'SMT==.
>
DEFINE LEN(X),<
X'SML==.-X'SMT
>
SRT.T:!
SUM.T:: SUMMARY
SUMGENERAL==.-SUM.T+1
DEFINE XX(MOD,ABR,MAP,TXT,ERR),<IOWD ABR'SML,ABR'SMT>
ISRTX:!
ISUMX: MODES
DEFINE XX(MOD,ABR,MAP,TXT,ERR),<EXP ABR'SMT-SUM.T>
ASRTX:!
ASUMX: MODES
SUBTTL Tables -- STATE keywords
STAT.L==0
DEFINE X(A),<
EXP SIXBIT /A/
STAT'A==:1_STAT.L
STAT.L==STAT.L+1
>
STAT.T: STATES
SUBTTL Other routines -- SETSPC - Set start and end of concatinated set
;CALL:
; PUSHJ P,SETSPC
;Returns with S.FRST and S.LAST updated
;Uses T1,I
SETSPC::MOVEM I,S.FRST ;SAVE FIRST SPEC ADDRESS
SETS.1: MOVEM I,S.LAST ;SAVE LAST SPEC ADDRESS
LOAD T1,.FXMOD(I),FX.TRM ;GET TERMINATOR
JUMPE T1,.POPJ## ;RETURN IF END
PUSHJ P,S$NEXT## ;GET NEXT SCAN SPEC
POPJ P, ;ALL DONE
JRST SETS.1 ;AND LOOP
SUBTTL Other routines -- FIXTTY - Convert TTY/PTY/CTY to standard format
;CALL:
; PUSHJ P,FIXTTY
;RETURNS NEW VALUES IN .FZTTY/.FZTTM
FIXTTY::MOVE T3,.FZTTY(I) ;GET /TTY:
TLNN T3,-1 ;SEE IF 0,,STUFF
MOVSS T3 ;YES--POSITION TO LH
HLRZ T4,.FZTTY(I) ;GET LH
CAIN T4,1 ;SEE IF SPECIAL NOxxx FORM
POPJ P, ;YES--LEAVE ALONE
PUSHJ P,TTYCHK ;CONVERT TO STANDARD FORMAT
MOVEM T3,.FZTTY(I) ;SAVE
PUSHJ P,.MKMSK## ;MAKE MASK
TRNE T1,-1
TRO T1,-1
MOVEM T1,.FZTTM(I) ;AND STORE
POPJ P, ;RETURN
TTYCHK: CAMN T3,[-1] ;SEE IF SPECIFIED
POPJ P, ;NO--RETURN
PUSHJ P,FIXNNN ;EXTRACT NNN IN OCTAL
HLRZ T2,T3 ;GET GENERIC PART
CAIN T2,'CTY' ;SEE IF CTY
JRST FIXTC ;YES--CHECK THAT
CAIN T2,'PTY' ;SEE IF PTY
JRST FIXTP ;YES--CHECK THAT
CAIN T2,'DET' ;SEE IF DET
JRST FIXTD ;YES--CHECK THAT
CAIE T2,'TTY' ;SEE IF TTY
$FATAL (ITF,<Illegal TTY format>);NO--ERROR
CAMN T1,CTYLIN## ;SEE IF CTY
JRST FIXTCC ;YES--RETURN CTY
CAMGE T1,SYSPTY## ;SEE IF IN PTY RANGE
POPJ P, ;NO--RETURN OK
SUB T1,SYSPTY## ;YES--CONVERT TO PTY RANGE
CAML T1,PTYN## ;SEE IF IN RANGE
$FATAL (TOR,<TTY number out of range>);NO--ERROR
PUSHJ P,TTYNNN ; INTO SIXBIT
HRLI T1,'PTY' ; AND INCLUDE GENERIC
MOVE T3,T1 ;RETURN IN T3
POPJ P, ;AND EXIT
FIXTCC: MOVSI T3,'CTY' ;RETURN CTY
POPJ P, ;AND EXIT
FIXTP: CAML T1,PTYN## ;SEE IF IN RANGE
JRST E$$TOR ;NO--ERROR
POPJ P, ;YES--RETURN
FIXTC: TRNE T3,-1 ;CTY HAS NO DIGITS
JRST E$$ITF ;SO THATS BAD IF SPECIFIED
POPJ P, ;ELSE RETURN
FIXTD: MOVE T2,SYSPTY## ;GET FIRST PTY
ADD T2,PTYN## ;PLUS NUMBER OF PTYS
CAML T1,T2 ;SEE IF IN RANGE
JRST E$$TOR ;NO--EROR
POPJ P, ;YES--OK
SUBTTL Other routines -- FIXNNN - Form octal terminal number
FIXNNN: MOVEI T1,0 ;CLEAR RESULT
MOVE T2,[POINT 6,T3,17] ;SETUP POINTER TO DIGITS
FIXN.1: ILDB T4,T2 ;GET A DIGIT
JUMPE T4,.POPJ## ;RETURN IF BLANK
CAIL T4,'0' ;SEE IF OCTAL SIXBIT
CAILE T4,'7' ;..
$FATAL (NNT,<Non-numeric TTY specification>)
IMULI T1,10 ;ADVANCE DIGITS
ADDI T1,-'0'(T4) ;ADD NEXT DIGIT IN
TLNN T2,770000 ;SEE IF ALL DONE
POPJ P, ;YES--RETURN
JRST FIXN.1 ;NO--LOOP
SUBTTL Other routines -- TTYNNN - Form SIXBIT terminal number
TTYNNN::CAILE T1,777 ;GENERAL RANGE CHECK TTY NUMBER
JRST E$$TOR ;NO--OUT OF RANGE
MOVE T3,[POINT 6,T1,17] ;SETUP POINTER
TTYNN1: IDIVI T1,10 ;BREAK OFF DIGITS
PUSH P,T2 ;SAVE DIGIT
CAIE T1,0 ;ALL DONE?
PUSHJ P,TTYNN1 ;NO--RECURSE
POP P,T2
ADDI T2,'0' ;MAKE SIXBIT
IDPB T2,T3 ;STORE DIGIT
POPJ P, ;AND RETURN
SUBTTL Other routines -- CHKJOB - Range check job number
CHKJOB::PUSH P,T1 ;SAVE JOB NUMBER
PUSHJ P,XB$JMX## ;GET JOBMAX
CAMGE T1,(P) ;WITHIN RANGE?
$FATAL (JOR,<Job number out of range>)
POP P,T1 ;RESTORE T1
POPJ P, ;AND RETURN
SUBTTL Other routines -- CHKDOT - See if dot (".") valid
CHKDOT::TLNE F,(FL.CRASH) ;CRASH FILE READING?
$FATAL (DSC,<Dot (".") specification illegal when reading crash files>)
TLNE F,(FL.WHOSRV) ;ARE WE A SERVER?
$FATAL (DSS,<Dot (".") specification illegal for server requests>)
POPJ P, ;AND RETURN
SUBTTL Other routines -- FIXNOD - Fix up node specification
;This routine insures that .FZNNM has a sixbit node name, and .FZNMM
;has its wildcarded mask. It handles the case of .FZNNM initialing
;having either sixbit alpha, sixbit numeric, or octal node name/number.
FIXNOD::MOVE T1,.FZNNM(I) ;GET NODE
CAMN T1,[-1] ;SWITCH GIVEN?
POPJ P, ;NO--LEAVE ALONE
TLNN T1,-1 ;SIXBIT OR OCTAL?
JRST NOD.1 ;OCTAL
MOVEI T1,0 ;SIXBIT--CLEAR ANSWER
MOVE T2,[POINT 6,.FZNNM(I)] ;POINT TO SIXBIT NUMERIC
NOD.2: ILDB T3,T2 ;GET A CHAR
JUMPE T3,NOD.1 ;DONE IF BLANK
CAIL T3,'0' ;SEE IF OCTAL DIGIT
CAILE T3,'7' ;..
JRST NOD.E ;NO--POSSIBLY ERROR
IMULI T1,10 ;SHIFT
ADDI T1,-'0'(T3) ;ADD DIGIT IN
TLNE T2,770000 ;DONE?
JRST NOD.2 ;NO--LOOP
NOD.1: PUSHJ P,NODINF## ;CONVERT TO NAME
MOVEI T1,-1 ;INVALID
MOVEM T1,.FZNNM(I) ;STORE NAME
SETOM .FZNMM(I) ;INDICATE NOT WILD
POPJ P, ;AND RETURN
NOD.E: JUMPE T1,.POPJ## ;OK IF NO DIGITS YET
$FATAL (NNN,<Non-numeric NODE specification>);ERROR IF NOT
SUBTTL Other routines -- MSKUC/MSKLC - Convert ASCII strings to masks
MSKUC:: SKIPA T4,[137] ;MASK FOR UC CHARACTER
MSKLC:: MOVEI T4,177 ;MASK FOR ALL CHARACTERS
PUSHJ P,.SAVE1## ;SAVE P1
HRLI T1,(POINT 7,) ;MAKE BYTE POINTERS
HRLI T2,(POINT 7,) ;..
MOVEI P1,(T3) ;SAVE COUNT
MSK.7: ILDB T3,T1 ;GET A CHAR
CAIN T3,"*" ;ALL WILD?
JRST MSK.S ;YES!
CAIN T3,"?" ;SEE IF WILDCARD
TDZA T3,T3 ;YES--FLAG
MOVEI T3,(T4) ;NO--CLEAR
IDPB T3,T2 ;STORE
SOJG P1,MSK.7 ;LOOP
POPJ P, ;AND RETURN
MSK.S: MOVEI T3,0 ;CLEAR MASK
IDPB T3,T2 ;STORE FOR THIS POSITION
SOJG P1,MSK.S ;AND LOOP
POPJ P, ;AND RETURN
SUBTTL SETSCN - SCAN interface for SETUUOs
Comment |
This module is designed to scan and setup the function table
to perform all the various SETUUOs that are scanned from the
SETUUO switch. It is called only from the internal switch dispatch
inside SCAN.
|
SUBTTL SETUUO -- $SETUUO - switch scanning
[ASCIZ/SETUUO keyword:value/]
$SETUUO:MOVE T1,[IOWD SETLEN,SETTAB] ;POINT TO TABLE
PUSHJ P,KEYWRD ;PROCESS THE KEYWORD
AOS SETCNT ;COUNT NUMBER OF SETUUO CMDS
PUSHJ P,.SAVE1## ;SAVE P1
MOVE P1,SETPTR ;GET OLD POINTER
PUSH P,P1 ;SAVE POINTER TO ARG COUNT
ADDI P1,1 ;BUMP TO JOB NUMBER
SETZM (P1) ;LEAVE ZERO FOR NOW
ADDI P1,1 ;BUMP TO FNC,,ARG
MOVE T1,SETFNC(N) ;GET FUNCTION
MOVEM T1,(P1) ;STORE FNC CODE
PUSHJ P,@SETDSP(N) ;DISPATCH FOR SCANNING
ADDI P1,1 ;BUMP PAST END
CAIL P1,SETBLK+LN$SET ;SEE IF TOO MANY ARGS
$FATAL (TMS,<Too many SETUUO arguments>)
MOVEM P1,SETPTR ;STORE NEW POINTER
POP P,T1 ;RESTORE ARG
SUBI P1,(T1) ;COMPUTE DIFFERENCE
MOVEM P1,(T1) ;STORE COUNT
MOVE T2,2(T1) ;CHECK ARG
TRNN T2,-1 ;SEE IF ROUTINE SET
HRRM N,2(T1) ;NO--STORE RETURNED ARG
PJRST .SWDON## ;AND RETURN W/O STORE
SUBTTL SETUUO -- Switch keyword tables and dispatches
DEFINE FUNCTIONS,<
X WATCH, .STWTC
X MESSAGE,.STWTC
X LIMIT, .STTLM
X TIME, .STTLM
X CPU, .STCPU
X DSKFUL, .STDFL
X VIRTUAL,.STCVM
X PHYSICAL,.STCVM
X DEFER, .STDFR
X DEFAULT,.STDEF
X VTIME, .STTVM
>
DEFINE X(NAM,FNC),<EXP SIXBIT/NAM/>
SETTAB: FUNCTIONS
SETLEN==.-SETTAB
DEFINE X(NAM,FNC),<XWD FNC,0>
SETFNC: FUNCTIONS
DEFINE X(NAM,FNC),<EXP $'NAM>
SETDSP: FUNCTIONS
SUBTTL SETUUO scanning -- $DSKFUL - Scan DSKFUL arguments
$DSKFUL:MOVEI N,0 ;DEFAULT PAUSE
CAIE C,":" ;MORING COMMING?
POPJ P, ;NO--USE DEFAULT
MOVE T1,[IOWD DSKLEN,DSKTAB] ;YES--POINT TO TABLE
PJRST KEYWRD ;AND PROCESS
DSKTAB: SIXBIT /PAUSE/
SIXBIT /ERROR/
DSKLEN==.-DSKTAB
SUBTTL SETUUO scanning -- $DEFAULT - Scan DEFAULT arguments
$DEFAULT:CAIE C,":" ;MORING COMING?
JRST E$$SKR ;KEYWORD REQUIRED
MOVE T1,[IOWD DFRLEN,DFRTAB] ;POINT TO TABLE
PUSHJ P,KEYWRD ;PROCESS KEYWORD
CAIE C,":" ;STILL MORE?
JRST E$$SKR ;NO--ERROR
MOVEI T1,1(P1) ;GET ADDR BLOCK
HRRM T1,(P1) ;STORE
ADDI P1,1 ;BUMP
MOVE T1,DFRFNC(N) ;GET FUNCTION
MOVEM T1,(P1) ;STORE
ADDI P1,1 ;BUMP
PUSHJ P,@DFRDSP(N) ;DISPATCH ON REST
MOVEM N,(P1) ;STORE ARG
POPJ P, ;RETURN
DEFINE DEFAULTS,<
IFN FTTUFTS,<
X EDITOR, ST.EDI
X DESTINA,ST.DES
>;END IFN FTTUFTS
X PROTECT,.STDPC
X BUFFERS,.STDNB
>
DEFINE X(NAM,BIT),<EXP SIXBIT/NAM/>
DFRTAB: DEFAULTS
DFRLEN==.-DFRTAB
DEFINE X(NAM,BIT),<EXP BIT>
DFRFNC: DEFAULTS
DEFINE X(NAM,BIT),<EXP $'NAM>
DFRDSP: DEFAULTS
$PROTECT:PUSHJ P,.OCTNW## ;READ THE PROTECTION
CAIL N,0 ;RANGE CHECK
CAIL N,1_WID(RB.PRV) ;..
$FATAL (POR,<Protection out of range>)
POPJ P, ;AND RETURN
$BUFFER:PUSHJ P,.DECNW## ;READ THE NUMBER
TDNE N,[-1,,777000] ;RANGE CHECK
$FATAL (BOR,<Buffer argument out of range>)
POPJ P, ;AND RETURN
IFN FTTUFTS,<
$DESTIN:PJRST .DECNW## ;READ THE DECIMAL ARG AND RETURN
$EDITOR:MOVE T1,[IOWD EDILEN,EDITAB] ;POINT TO TABLE
PUSHJ P,KEYWRD ;PROCESS THE KEYWORD
ANDI N,1 ;JUST THE LAST BIT
POPJ P, ;AND RETURN
EDITAB: SIXBIT /DEC/
SIXBIT /EXPERI/
SIXBIT /OFF/
SIXBIT /ON/
EDILEN==.-EDITAB
>;END IFN FTTUFTS
SUBTTL SETUUO scanning -- $DEFER - Scan DEFER argument
$DEFER: MOVEI N,1 ;DEFAULT DEFER
CAIE C,":" ;MORE COMING?
POPJ P, ;NO--USE DEFAULT
MOVE T1,[IOWD DEFLEN,DEFTAB] ;YES--POINT TO TABLE
PJRST KEYWRD ;AND PROCESS
DEFTAB: SIXBIT /NO/
SIXBIT /YES/
DEFLEN==.-DEFTAB
SUBTTL SETUUO scanning -- $VIRTUAL - Scan VIRTUAL arguments
$VIRTUAL:CAIE C,":" ;ARG COMING?
JRST E$$SKR ;KEYWORD REQUIRED
PUSHJ P,COREW ;READ CORE WORD
MOVSI N,(N) ;POSITION TO LH
VP.1: MOVEI T1,1(P1) ;GET ADDR
HRRM T1,(P1) ;STORE
MOVEM N,1(P1) ;STORE WORD
AOJA P1,.POPJ## ;BUMP AND RETURN
SUBTTL SETUUO scanning -- $PHYSICAL - Scan PHYSICAL argument
$PHYSICAL:CAIE C,":" ;ARG COMING?
JRST E$$SKR ;NO--ERROR
PUSHJ P,.TIAUC## ;GET A CHAR
CAIL C,"0" ;DIGIT?
CAILE C,"9" ;..
JRST PHYS.1 ;NO
PUSHJ P,COREC ;READ CORE WORD
JRST VP.1 ;AND STORE
PHYS.1: MOVE T1,[IOWD PHYLEN,PHYTAB] ;POINT TO TABLR
PUSHJ P,KEYWRC ;PROCESS KEYWORD
CAIE C,":" ;MORE COMING?
JRST E$$SKR ;NO--ERROR
PUSH P,N ;SAVE INDEX
PUSHJ P,COREW ;READ CORE WORD
POP P,T1 ;RESTORE INDEX
CAIN T1,0 ;SEE IF LIMIT
TXO N,400000 ;YES--SET BIT
JRST VP.1 ;AND STORE
PHYTAB: SIXBIT /LIMIT/
SIXBIT /GUIDEL/
PHYLEN==.-PHYTAB
COREW: PUSHJ P,.TIAUC## ;PRIME THE PUMP
COREC: PUSHJ P,.COREC## ;READ THE CORE WORD
CAIG N,^D512 ;JUST A NUMBER?
LSH N,^D10 ;YES--CONVERT TO WORD
LSH N,-^D9 ;ALWAYS CONVERT TO PAGES
POPJ P, ;AND RETURN
SUBTTL SETUUO scanning -- $VTIMER - Scan VTIMER arg
$VTIMER:MOVEI N,^D500 ;DEFAULT 500 MILLISECONDS
CAIN C,":" ;ARG COMING?
PUSHJ P,.DECNW## ;YES--GET IT
POPJ P, ;AND RETURN
SUBTTL SETUUO scanning -- $TIME, $LIMIT - Scan a TIME argument
$TIME:!
$LIMIT: PUSHJ P,.SAVE2## ;SAVE P1/P2
MOVEI P1,0 ;START CLEAR
MOVEI P2,3 ;PRESET MAX SUPER DIGITS
LIMI.1: CAIE C,":" ;MORE COMING?
JRST LIMI.2 ;NO--RETURN
PUSHJ P,.DECNW## ;YES--READ NUMBER
CAIL N,^D0 ;RANGE CHECK
CAILE N,^D60 ;..
$FATAL (LOR,<Limit out of range>)
IMULI P1,^D60 ;SHIFT OVER
ADDI P1,(N) ;ACCUMULATE DIGITS
SOJGE P2,LIMI.1 ;LOOP FOR MAX
$FATAL (IFL,<Illegally formated limit switch>)
LIMI.2: MOVE N,P1 ;COPY ARG FOR RETURN
POPJ P, ;AND EXIT
SUBTTL SETUUO scanning -- $WATCH - Scan WATCH arguments
$WATCH: PUSHJ P,.SAVE1## ;SAVE P1
CAIE C,":" ;SEE IF MORE COMING
JRST E$$SKR
MOVEI P1,0 ;CLEAR WORD
WATC.1: MOVE T1,[IOWD WATLEN,WATTAB] ;SCAN A KEYWORD
PUSHJ P,KEYWRD ;..
IOR P1,WATBIT(N) ;INCLUDE THE BIT FOR THAT ONE
CAIN C,"," ;MORE COMING?
JRST WATC.1 ;YES--LOOP
MOVE N,P1 ;COPY ARG FOR RETURN
POPJ P, ;AND RETURN
DEFINE WATCHS,<
X DAY, ST.WDY
X RUN, ST.WRN
X WAIT, ST.WWT
X READS, ST.WDR
X WRITES, ST.WDW
X VERSION,ST.WVR
X MTA, ST.WMT
X FILE, ST.WFI
X ALL, ST.WAL
>
DEFINE X(NAM,BIT),<EXP SIXBIT/NAM/>
WATTAB: WATCHS
WATLEN==.-WATTAB
DEFINE X(NAM,BIT),<EXP BIT>
WATBIT: WATCHS
SUBTTL SETUUO scanning -- $MESSAGE - Scan MESSAGE arguments
$MESSAGE:PUSHJ P,.SAVE1## ;SAVE P1
CAIE C,":" ;SEE IF MORE COMING
JRST E$$SKR
MOVEI P1,0 ;CLEAR WORD
MESC.1: MOVE T1,[IOWD MESLEN,MESTAB] ;SCAN A KEYWORD
PUSHJ P,KEYWRD ;..
IOR P1,MESBIT(N) ;INCLUDE THE BIT FOR THAT ONE
CAIN C,"," ;MORE COMING?
JRST MESC.1 ;YES--LOOP
MOVE N,P1 ;COPY ARG FOR RETURN
POPJ P, ;AND RETURN
DEFINE MESSAGES,<
X CONTINUATION, ST.WCN
X FIRST, ST.WFL
X PREFIX, ST.WPR
X ALL, ST.WMS
>
DEFINE X(NAM,BIT),<EXP SIXBIT/NAM/>
MESTAB: MESSAGES
MESLEN==.-MESTAB
DEFINE X(NAM,BIT),<EXP BIT>
MESBIT: MESSAGES
SUBTTL SETUUO scanning -- $CPU - Scan CPU argument
$CPU: PUSHJ P,.SAVE1## ;SAVE P1
CAIE C,":" ;SEE IF MORE COMING
JRST E$$SKR
MOVEI P1,0 ;CLEAR WORD
CPUC.1: MOVE T1,[IOWD CPULEN,CPUTAB] ;SCAN A KEYWORD
PUSHJ P,KEYWRD ;..
IOR P1,CPUBIT(N) ;INCLUDE THE BIT FOR THAT ONE
CAIN C,"," ;MORE COMING?
JRST CPUC.1 ;YES--LOOP
MOVE N,P1 ;COPY ARG FOR RETURN
POPJ P, ;AND RETURN
DEFINE CPUS,<
X CPU0, SP.CR0
X CPU1, SP.CR1
X 0, SP.CR0
X 1, SP.CR1
>
DEFINE X(NAM,BIT),<EXP SIXBIT/NAM/>
CPUTAB: CPUS
CPULEN==.-CPUTAB
DEFINE X(NAM,BIT),<EXP BIT>
CPUBIT: CPUS
SUBTTL Support routines -- KEYWRD- Read keyword and search table
KEYWRC: PUSH P,T1 ;SAVE USERS ARG
PUSHJ P,.SIXSC## ;READ SIXBIT (CHAR IN C)
JRST KEYW.1 ;JOIN PROCESSING
KEYWRD: PUSH P,T1 ;SAVE USERS ARG
PUSHJ P,.SIXSW## ;READ THE KEYWORD
KEYW.1: JUMPE N,E$$NKS ;ERROR IF NULL
MOVE T1,(P) ;GET USERS ARG
PUSHJ P,.NAME## ;LOOKUP IN TABLE
JRST KEYW.2 ;ERROR
POP P,T2 ;GET USERS ARG BACK
MOVEI T1,-1(T1) ;FIX UP T1
TLZ T2,-1 ;AND T2
SUBI T1,(T2) ;COMPUTE OFFSET
MOVEI N,(T1) ;COPY
POPJ P, ;AND RETURN
KEYW.2: JUMPG T1,E$$AKW ;CHECK UNKNOWN
$FATAL (UKW,<Unknown keyword >,E.KEY)
$FATAL (AKW,<Ambiguous keyword >,E.KEY)
$FATAL (NKS,<No keyword specified>)
$FATAL (SKR,<Switch keyword required>)
E.KEY: MOVE T1,N ;COPY ARG
PJRST .TSIXN## ;TYPE AND RETURN
SUBTTL Storage
$LOW
CRSOPN: BLOCK 3 ;CRASH FILE OPEN BLOCK
CRSLOK: BLOCK .RBVER+1 ;CRASH FILE LOOKUP BLOCK
CRSFIL::BLOCK ^D15 ;ASCIZ CRASH FILE SPEC
CRSPTR: BLOCK 1 ;CRASH FILE BYTE POINTER
S.CACHE::BLOCK 1 ;/CACHE: switch
S.FRST::BLOCK 1
S.LAST::BLOCK 1
I.PREV::BLOCK 1
O.SPEC::BLOCK .FZLEN
SETBLK::BLOCK LN$SET
SETPTR: BLOCK 1
SETCNT::BLOCK 1
END