Trailing-Edge
-
PDP-10 Archives
-
BB-X116A-BB_1984
-
dtedlc.m11
There are 15 other files named dtedlc.m11 in the archive. Click here to see a list.
.TITLE DTEDLC - DTE DLC data base
.IDENT /X01190/
.ENABL LC
;
;
; COPYRIGHT (c) 1980, 1981, 1982
; DIGITAL EQUIPMENT CORPORATION
;
; This software is furnished under a license and may be used
; and copied only in accordance with the terms of such license
; and with the inclusion of the above copyright notice. This
; software or any other copies thereof may not be provided or
; otherwise made available to any other person. No title to
; and ownership of the software is hereby transferred.
;
; The information in this software is subject to change
; without notice and should not be construed as a commitment
; by DIGITAL EQUIPMENT CORPORATION.
;
; DIGITAL assumes no responsibility for the use or reliability
; of its software on equipment which is not supplied by
; DIGITAL.
;
;+
; DLC data base for DTE device driver.
;-
.MCALL DAT$
DAT$ COR
.WORD 0 ; Line table timer cell and flags
CHR$W CTL,0 ; DTE CSR register address.
CHR$W CTL,1 ; Interrupt vector
CHR$B CTL,2 ; Interrupt priority
CTL$B ; Controller number
DSR$W
SYN$X ; Interrupt SYNCH block.
END$
.BYTE 0 ; Protocol state
.BYTE 0 ; Requested protocol state
.BYTE 0 ; Reported circuit state
.BYTE 0 ; Network Management line state
.BYTE 0 ; Device state
.BYTE 0 ; NMX PIX
.EVEN
.BYTE 0 ; Long timer cell.
.BYTE 0 ; Start threshold counter.
.WORD 0 ; Owner process handle
.WORD 0 ; Unreported transient error
.WORD 0 ; Unreported persistent error
LST$D ; Pending control function queue.
.WORD 0 ; RDBs pending at the LLC.
CHR$W UNT,<0> ; CIRCUIT COST
LIX$W ; Circuit event logging ID
LIX$W ; Line event logging ID
.BYTE 0 ; My processor number.
.BYTE 0 ; His processor number.
.WORD 0 ; Offset to his general.
.WORD 0 ; Offset to his to-me.
.WORD 0 ; Offset to my general.
.WORD 0 ; Offset to my to-him.
.WORD 0,0,0 ; His STATUS.
.WORD 0,0,0 ; His QSIZE.
.WORD 0,0,0 ; My STATUS.
.WORD 0,0,0 ; My QSIZE.
.WORD 0 ; My keep-alive.
.WORD 0 ; Current receive RDB.
.WORD 0,0 ; Current receive physical address.
.WORD 0 ; Current receive count.
LST$D ; Pending transmits.
.WORD 0 ; Transmit message size.
.WORD 0 ; Current transmit buffer chain.
.WORD 0,0 ; Current transmit physical address.
.WORD 0 ; Current transmit count.
.WORD 0,0 ; Bytes received.
.WORD 0,0 ; Bytes transmitted.
.WORD 0,0 ; Messages received.
.WORD 0,0 ; Messages transmitted.
.WORD 0,0 ; Time line counters zeroed.
.WORD 0 ; Configuration errors (bit mapped).
.WORD 0 ; Device service errors (bit mapped).
.WORD 0 ; Fatal device errors (bit mapped).
.WORD 0 ; Protocol errors (bit mapped).
.EVEN
.WORD DTE.bf ; Transmit buffer length.
VFY$ D.LEN
.BLKB DTE.bf ; Transmit buffer.
END$
.END