Trailing-Edge
-
PDP-10 Archives
-
BB-Y390T-BM
-
lngsrc/orion.mac
There are 38 other files named orion.mac in the archive. Click here to see a list.
TITLE ORION - DRIVER FOR THE OPERATOR INTERFACE PROGRAM
SUBTTL Cliff Romash/Murray Berkowitz/PJT 27-Nov-81
;
;
;
ASCIZ /
COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION
1975,1976,1977,1978,1979,1980,1981,1982
/
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED
; AND COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE
; AND WITH THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS
; SOFTWARE OR ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR
; OTHERWISE MADE AVAILABLE TO ANY OTHER PERSON. NO TITLE TO
; AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE
; WITHOUT NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT
; BY DIGITAL EQUIPMENT CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY
; OF ITS SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY
; DIGITAL.
SEARCH GLXMAC,ORNMAC,QSRMAC
PROLOG(ORION)
ERRSET ;SETUP ALL ERROR ROUTINES EXTERNAL
PARSET ;PARSER ROUTINES
IFN FTDN60,<
.REQUIR OPRCMD ;IF DN60 LOAD SYNTAX TABLES
> ;End FTDN60
.OBSOP==1 ;SYSTEM OPERATOR PRIVS
EXTERNAL TABSRC ;TABLE SEARCH
EXTERNAL ARGRTN ;SETUP ARGUMNET IN MESSAGE
EXTERNAL BLDOBJ ;BUILD AN OBJECT
EXTERNAL CMDEND ;FINISH COMMAND AND SEND TO QUASAR
INTERNAL .JBVER ;AVAILABLE FOR OPRLOG
; INTERNAL CHKWHL ;CHECK FOR WHEEL ROUTINE
INTERNAL GETJOB ;GET JOB INFO
INTERNAL SNDAOP ;SEND MESSAGE TO ALL OPRS
ENTRY OPRENB ;OPR ENABLED FOR NODE
EXTERNAL QSREDT,PAREDT,LOGEDT,ERREDT,NETEDT
ORNWHO==0
ORNVER==4
ORNMIN==0
ORNEDT==410
%%.ORV==<VRSN.(ORN)>+PAREDT+QSREDT+ERREDT+LOGEDT+NETEDT
.JBVER==137
LOC .JBVER
EXP %%.ORV
RELOC
SUBTTL Table of Contents
; TABLE OF CONTENTS FOR ORION
;
;
; SECTION PAGE
; 1. Table of Contents......................................... 2
; 2. Revision History.......................................... 3
; 3. Constants and declarations................................ 4
; 4. Global Storage............................................ 5
; 5. Main Data Storage......................................... 6
; 6. WTO storage............................................... 7
; 7. Interrupt vector definitions.............................. 8
; 8. Initialization block...................................... 9
; 9. ORION Main entry and initialization..................... 10
; 10. MAIN IPCF message processing loop...................... 11
; 11. REQTIM Routine to put a request on the event queue....... 12
; 12. PROIPC Process an IPCF message........................... 13
; 13. SYSMSG Process system messages........................... 14
; 14. IPCCMS Process messages from [SYSTEM]IPCC................ 15
; 15. GOPHMS Process messages from [SYSTEM]GOPHER.............. 16
; 16. ORNINT Initialization routines........................... 17
; 17. MSGCHK Message length and header validation.............. 18
; 18. RETMSG Returned DN60 message display..................... 19
; 19. OPRHEL Hello message from OPR............................ 20
; 20. APLHEL Hello message from application (NCP).............. 21
; 21. CHKNOD Validate the OPR node data........................ 22
; 22. GETNOD Extract located node of message sender............ 23
; 23. OPRSET Process setup reply from OPR...................... 24
; 24. SNDSET Send setup reply to OPR........................... 25
; 25. TEXT Routine to Process a TEXT Message................. 26
; 26. SPGOUT Setup output page to send......................... 27
; 27. W$WTOR Process a WTOR Message............................ 28
; 28. W$KWTO Kill a WTOR request by code....................... 29
; 29. W$NODE Determine destination node for message............ 30
; 30. W$KMES Kill a message and notify OPR..................... 31
; 31. W$WTO Process a WTO message............................. 32
; 32. W$CHEK Check if WTO/WTOR allowed for this job............ 33
; 33. W$LOGM Log a message..................................... 34
; 34. W$VALID Validate WTO, WTOR and ACK Messages............... 35
; 35. WTOTXT, WTOTYP, WTOANS and WTOACD routines................ 36
; 36. WTOJOB,WTOERR,WTORTE and WTODES routines................. 37
; 37. WTOOBJ Process WTO object block.......................... 38
; 38. WTOOCD Object block type................................. 39
; 39. WTONOP Process a NOOP block.............................. 39
; 40. W$MTXT Get the text into the message..................... 40
; 41. W$CRLF Terminate line with CRLF.......................... 41
; 42. W$TAB Insert a TAB into message......................... 41
; 43. OPRMSG Build a message for OPR........................... 42
; 44. W$MESS Setup a WTO/WTOR/ACK message...................... 43
; 45. MSGFIN Finish DISPLAY message............................ 44
; 46. W$JOBH Setup a job header message........................ 45
; 47. GETJOB/GETJBT Get job information....................... 46
; 48. GLOC Get physical location of TTY...................... 47
; 49. GETUSR Get user info for notify.......................... 48
; 50. GETNAM Get user name..................................... 49
; 51. W$SHOW Show ACK message from QUASAR...................... 50
; 52. CHKQSR Verify QUASAR message ID.......................... 50
; 53. W$ASND Send an ACK to OPR................................ 50
; 54. W$ACKM Process an ACK message............................ 51
; 55. TXTMOV Text Move Routine................................. 51
; 56. CMDMES Process a DN60 command message.................... 52
; 57. COMMAN Process an OPR command message (ala OPRPAR)....... 53
; 58. FNDAPL Find an application............................... 54
; 59. Dispatch Table for Command Messages....................... 55
; 60. TAKCMD Setup for a TAKE command.......................... 56
; 61. TAKEND Reset effects of TAKE command..................... 56
; 62. TAKABT Abort current TAKE command........................ 56
; 63. GETPAG Setup MO with address of output message........... 57
; 64. RELPAG Release output page............................... 57
; 65. ERRALL Error Message to All.............................. 58
; 66. DISABLE/ENABLE commands................................... 59
; 67. ENAODP ENABLE OUTPUT display command..................... 60
; 68. ENALOG ENABLE/DISABLE LOG command........................ 62
; 69. CLSLOG Process the CLOSE LOG command..................... 62
; 70. ENACLS ENABLE CLASS-SCHEDULING commands (TOPS20)......... 63
; 71. ENARET ENABLE FILE-RETRIEVAL commands (TOPS20)........... 64
; 72. NOTIFY Write message to terminal for quasar.............. 65
; 73. SEND Process the SEND command.......................... 66
; 74. SNDALL Process SEND ALL command.......................... 67
; 75. DEFNOD Routine to return default node for OPR............ 67
; 76. SENDOP Send to operator command.......................... 68
; 77. BLDSND Build the SEND text............................... 69
; 78. BLDALL Build the TOPS-10 SEND ALL text................... 69
; 79. SNDALX Send message to all terminals..................... 70
; 80. SNDTTY Send a message to a terminal...................... 71
; 81. SHOW SHOW Command...................................... 72
; 82. SHWOPR Show operators command............................ 73
; 83. SHWSCH Show scheduler information........................ 74
; 84. SHWMSG Show messages command............................. 75
; 85. FINSHW Finish a SHOW message............................. 75
; 86. MSGNOD Routine to Build Display Blocks for a Node....... 76
; 87. BLKDPY Build message into output......................... 76
; 88. GETMSG Get a message given the number.................... 77
; 89. FNDMSG Find a message for node........................... 78
; 90. CHKMSG Search node for a message......................... 79
; 91. NXTMSG Get the next message.............................. 79
; 92. REPORT Log messages in SYSERR file....................... 80
; 93. CHKWTO Routine to check for outstanding WTORS for all nodes 81
; 94. OPRLST Routine to Build Display Blocks for an Operator.. 82
; 95. OPRDPY Build Operator Info............................... 83
; 96. RESPON Respond command................................... 84
; 97. Operator privilege checking routines...................... 85
; 98. GETPRV Find out if the sender could be an OPR of sorts... 86
; 99. OPRENB Operator enabled for a node....................... 87
; 100. O$REMOTE/O$HOST/O$SYSTEM/CHKWHL Routs. to check privs..... 88
; 101. TOPS20 Privilege checking routines........................ 89
; 102. G$ACK Send an ACK to sender if requested................ 90
; 103. BLDACK Build an ACK message.............................. 91
; 104. ADDNOD Add a node to the list............................ 92
; 105. LOCNOD Locate a node in the list......................... 93
; 106. DELNOD Delete a node from the list....................... 94
; 107. NODONL Node on line for DN60............................. 95
; 108. ADDOPR Add an OPR to data base and node list............. 96
; 109. EXPTAB Expand OPR table.................................. 97
; 110. VALOPR Validate the OPR.................................. 98
; 111. CHKOPR Check if previously OPR........................... 98
; 112. DELOPR Delete an OPR entry from table and node list...... 99
; 113. SNDLST Send unsent messages to OPR and OBJECTS........... 100
; 114. RSDPID Resend messages to a specific PID................. 101
; 115. MOVARG Setup argument in output message.................. 102
; 116. MOVAR2 Add a 2 word argument to the message.............. 102
; 117. SNDAOP Send a message to all OPRs........................ 103
; 118. SNDOPR Send a message to at least one OPR................ 104
; 119. CHKOSD Check message flags for OPR....................... 105
; 120. MOVBLK Move a standard argument block.................... 106
; 121. REQMSG Reque a message to be sent later.................. 107
; 122. RSDMSG Resend requed messages............................ 108
; 123. REQNST Reque unsent messages............................. 109
; 124. ADDSFL Add a send failure to table....................... 110
; 125. DELSPL Delete a send failure entry....................... 111
; 126. CHKSFL Check send failure entries........................ 111
; 127. CLRSFL Clear send failure list........................... 112
; 128. SNDQSR Send a message to QUASAR.......................... 113
; 129. SNDACT Send a message to ACTDAE.......................... 113
; 130. SQSD60 Send a message to QUASAR about DN60............... 113
; 131. SNDMSG Send a message to a specific PID.................. 114
; 132. SPDOPR Send a message to an OPR.......................... 115
; 133. SNDPID Send a message to any PID (not OPR)............... 116
; 134. Interrupt Handler......................................... 117
; 135. Default PDBs for OPRCMD................................... 118
; 136. SETOUT Setup output of data.............................. 119
; 137. SNDOUT Output routines for DN60.......................... 119
; 138. OUTRTN Output routine for links.......................... 119
; 139. SETPTR Setup pointers for output......................... 119
SUBTTL Revision History
COMMENT \
Edit Module When Change
1 ORION 31-May-77 First Development version on SYS (TOPS20)
2 ORION 1-Jun-77 Change to sparse dispatch table.
Clean up ENABLE command.
3 ORION 1-Jun-77 Add support for WTO message for simple
display only.
4 ORION 2-Jun-77 Provide primitive linked list facility
to queue messages received for display.
5 ORION 6-Jun-77 Change to use OTS library.
6 ORION 9-Jun-77 Implement RESPOND command.
7 ORION 10-Jun-77 Implement ALIGN command.
10 ORION 10-Jun-77 Implement CANCEL command.
11 ORION 13-Jun-77 Add code to send SET commands to
NETCON (for now).
12 ORION 14-Jun-77 Implement REQUEUE command.
13 ORION 14-Jun-77 Change to use saved contents on .CMNUM and .CMNUX
as pointer, not number
14 ORION 14-Jun-77 Implement /JOBNAME and /SEQUENCE switches
on CANCEL and REQUEUE commands.
15 ORION 15-Jun-77 Implement SET command for GALAXY
components.
16 ORION 20-Jun-77 Clean up AC usage.
17 ORION 23-Jun-77 Use Software Interrupts so we can use sleeps to
do timing.
20 ORION 24-Jun-77 Clean up WTO and Display code. Add routines
to build DISPLAY message and to send to all
OPR's on a node.
Use GALAXY wide TEXT message instead of
ACKNOWLEDGEMENT message
21 ORION 27-Jun-77 Fix build-a-display routine.
22 ORION 28-Jun-77 Remove internal list structure symbols
to ORNMAC where they belong.
23 ORION 29-Jun-77 Implement Acknowledgement scheme for commands
so as to get errors to the operator that typed
the command.
24 ORION 6-Jul-77 Implement the SHOW command for status and
parameters
25 ORION 8-Jul-77 Add privilege checking.
26 ORION 26-Aug-77 Reorganize main loop to make errors work
Also, throw away messages from [SYSTEM]INFO
27 ORION 20-Sep-77 Make this version 2. Note that this edit is
not in chronological order due to parallel
development.
30 ORION 21-Jul-77 Add TOPS10 interrupt system
31 ORION 18-Aug-77 Make BLDOBJ store high part of range correctly
32 ORION 19-Aug-77 Remove IFC stopcode and make it an error
33 ORION 19-Aug-77 Make CANCEL and REQUEUE commands
not allow ranges.
34 ORION 22-Aug-77 Ensure that high part of range is greater
than low part
35 ORION 23-Aug-77 Clean up SET command--add ranges, other parameters
36 ORION 20-Sep-77 Fix bug in SET command dispatch--caused
?Illegal uuo
37 ORION 23-Sep-77 Add SUPPRESS command
40 ORION 26-Sep-77 Change all string store code to use one common routine
41 ORION 13-Oct-77 Add HOLD and RELEASE commands
42 ORION 13-Oct-77 Fix bugs in SUPPRESS and SET commands.
43 ORION 20-Oct-77 Add SET TERMINAL NODE and SET TERMINAL
MESSAGES commands to add an operator to
the node list.
44 ORION 21-Oct-77 Add SEND BATCH-STREAM and EXAMINE
commands
45 ORION 2-Nov-77 Add new WTO/WTOR scheme.
46 ORION 8-Nov-77 Add OPD.FL word to OPERATOR DISPLAY message
and flag that a response was requested.
47 ORION 11-Nov-77 Change BLDDPY to build new format Operator
Display message. Also, only sequence messages
that get queued up.
50 ORION 13-Nov-77 Add code for SHOW MESSAGES commands
51 ORION 14-Nov-77 Change WTOPER to never queue up WTO's
52 ORION 16-Nov-77 Change messages with no node to go to
central site
53 ORION 18-Nov-77 Add DISCARD command to throw away an
outstanding message
54 ORION 18-Nov-77 Allow a WTO to be an valid ack
55 ORION 23-Nov-77 Change the format of SHOW STATUS and SHOW PARAMETERS
56 ORION 5-Dec-77 Change format of the Ack list to accomodate
multiple SHOW STATUS etc. messages.
57 ORION 6-Dec-77 Change to use symbols for command message
60 ORION 7-Dec-77 Fix up PRVCHK for the -10
61 ORION 15-Dec-77 Fix bug in SHWLOP to make SHOW STATUS/PARAMETERS
work.
62 ORION 15-Dec-77 Add ROUTE command
63 ORION 17-Jan-78 Add symbols for CARD-PUNCH,PLOTTER
and PAPER-TAPE PUNCH
64 ORION 9-May-78 Add new command messages and WTO
65 ORION 16-May-78 Add new WTO message and validation
66 ORION 19-May-78 Fix the Respond Command
67 ORION 23-May-78 Fix Log File Symbols
70 ORION 24-May-78 Update -20 Privilege check and FORWARDSPACE/
BACKSPACE
71 ORION 2-Jun-78 Remove G$ACKL and ACK code. Also fix
SET command
72 ORION 5-Jun-78 Convert ALIGN, SUPPRESS and SHOW CONTROL
FILE to new messages
73 ORION 8-Jun-78 Create OPRLOG for LOGGING ORION Messages
74 ORION 9-Jun-78 New WTO formats and WTO logging
75 ORION 15-Jun-78 ADD new Show Messages
76 ORION 12-July-78 Add Send and Route Commands
77 ORION 15-July-78 Remove .REQUIRE Statements
100 ORION 17-July-78 Add Hold and Release code as well as new
DEVICE option for START Command
101 ORION 18-July-78 Add Portion of Enable for Output-display
setting
102 ORION 3-Aug-78 Add Set Job command and fix GETPAG and
RELPAG to cover more than one page.
103 ORION 4-Aug-78 Change ROUTE command to send one block
on the ROUTE Node command
104 ORION 4-Aug-78 Add SHOW Route Command Message and SET
JOB_PRIORITY Command Message
105 ORION 16-Aug-78 Add NCP support
106 ORION 21-AUG-78 FIX NEED APLHEL CODE AND CHANGE FINPAG TO RELPAG
AND OUTPAG TO GETPAG
107 ORION 28-Aug-78 Add the REPORT command
110 ORION 31-Aug-78 Add SHOW ACK for QUASAR SHOW MESSAGES
111 ORION 5-Sept-78 Fix SIXBIT conversion to make sure in
Upper case
112 ORION 11-Sept-78 BEGIN TO SETUP FOR MODULE OPRQSR
113 ORION 17-SEPT-78 CREATE ORNERR FOR ALL ORION ERRORS
114 ORION 20-Sept-78 Add WTOMAX symbol to check maximum allowable
wto message size
115 ORION 29-Sept-78 Make the P$KEYW,etc. routines part of
OPRPAR as P$KEYW,etc.
116 ORION 4-Oct-78 Add Resend Logic for IPCF Failures
117 ORION 18-Oct-78 Add -20 Node Jsys for getting Central site node
120 ORION 23-Oct-78 Add New TABAPL Macro for Application Table Names
121 ORION 23-Oct-78 Add NXTMSG Routine and Update FNDMSG and CHKMSG
Also add WT.KIL for Deleting a WTOR Message
122 ORION 24-Oct-78 Have Commands that come from Invalid OPR return
Error Message
123 ORION 30-Oct-78 Add -20 Tape and Disk Command Support
124 ORION 3-Nov_78 Add Application code Block for WTO messages
.WTACD AND SHOW STATUS AND PARAMETERS CODE
125 ORION 3-Nov-78 Add Code for Show Status and Show Parameter
messages
Also Move SHWSTS,SHWPRM,SHWQUE,SHWCTL,SHWRTE TO
OPRQSR AS Q$SHWQ,Q$SHWS,Q$SHWP,Q$SHWC,Q$SHWR
126 ORION 7-Nov-78 Add Code for Monitor Logout Messages
127 ORION 9-Nov-78 Add I%HOST Code to get Central Site from library
130 ORION 10-Nov-78 Add Notify Command
131 ORION 15-Nov-78 Fix WTOR so WDAJOB is saved for Job
132 ORION 28-Nov-78 Add RECOGNIZE Command for -10 and UNLOAD
Command for -20. Also make DISMOUNT -20
only for Disk Structures
133 ORION 29-Nov-78 Add I%JINF code to GETJOB and allow .WTTYP
without privileges
134 ORION 30-Nov-78 Add DELETE command and fixup REQUEST number
135 ORION 1-Dec-78 Add MODIFY Code and QUEUE-CREATE ENABLE/DISABLE
for JOBNAME AND SEQUENCE number
136 ORION 1-Dec-78 Add SEND ALL CODE although still need -10
Monitor Work
137 ORION 4-Dec-78 Add Verification for Remote Nodes and not allow
Batch Control
140 ORION 7-Dec-78 Fix ENABLE QUEUE to have to be WHEEL or OPERATOR
141 ORION 8-Dec-78 Add New Batch Field Code for -20
142 ORION 14-Dec-78 Fix W$WTO Bug for Lines with no Blanks that
exceed line length
143 ORION 15-Dec-78 Add DN200 OPR/ORION support
144 ORION 20-Dec-78 Resolve Privileges for DN200 OPR
145 ORION 21-Dec-78 Fix ORION for DN200..need two channels per
process
146 ORION 26-Dec-78 Modify Setup Message to accept Text as second
Block
147 ORION 5-Jan-79 Change KEYTAB Macro to ORNDSP to be compatible
with new PARUNV
150 ORION 8-Jan-79 Change to use new GLXLIB with PIBBLK for pids
151 ORION 9-Jan-79 Fix SHOW MESSAGE /NODE:
152 ORION 10-Jan-79 Fix Remote OPR check for the -20. OPR now has
Remote Operator Flag Set in Message
153 ORION 10-Jan-79 Add SEND OPR /NODE:
USE NODE NAME FOR -10 IN G$HOST
154 ORION 11-Jan-79 G$NODX for the Node Location info on the -20
155 ORION 15-Jan-79 Add SHOW OPERATORS Command
156 ORION 15-Jan-79 Add Timer to do Checkpoints for Log
157 ORION 18-Jan-79 Change MT.TXT message to use .CMTXT instead of
.WTTXT
160 ORION 19-Jan-79 Add New Enable Code
161 ORION 23-Jan-79 Finish ENABLE Commands and add ACK for SENDS
162 ORION 26-JAN-79 MAKE ENABLE LOG PRIVILEDGED AND SEND TO ALL
OPERATOR CHANGE IN LOGGING STATE
163 ORION 26-JAN-79 HAVE GETJOB SAVE JOB NUMBER IN JOBNUM
164 ORION 30-JAN-79 MODIFY CHKNOD TO WORK FOR NON-NETWORK SYSTEMS
165 ORION 1-Feb-79 Fix CHKMSG to Verify correct PID on W$KWTO
before returning. This eliminates positioning
problems
166 ORION 2-FEB-79 ADD BELLS TO SEND AND SEND ALL
167 ORION 6-FEB-79 ADD DN60 SUPPORT
170 ORION 6-FEB-79 ADD ARCHEIVE NOTIFY FOR THE -20
171 ORION 21-FEB-79 Do not create SERVER links when Debugging
although a call to N$INIT can be used to
get debugging links
172 ORION 21-FEB-79 RELEASE PAGE ON ACKS WHERE OPR NOT VALID
173 ORION 27-Feb-79 Add Take abort code and bells to WTOR messages
174 ORION 7-Mar-79 Modify ENABLE support code
175 ORION 11-Mar-79 Add Code to Set up Job location to Host name
if running under Job 0 on the -20
176 ORION 11-Mar-79 Add IB.FLG (IP.STP ) to get ORION Crashes
177 ORION 13-Mar-79 Restrict Remote Show Messages to just that Node
200 ORION 19-Mar-79 Remove $STOP for Large WTO message. Just
Truncate
201 ORION 23-Mar-79 Add Screening of Mount Messages and IBM Messages
with the .WTOCD block in the WTO message
202 ORION 26-Mar-79 Add IDENTIFY Command for Tapes
203 ORION 27-Mar-79 Fix SEND ALL bug
204 ORION 2-April-79 Add DN60 Internal Command Parsing Support
Also send Packets where possible
205 ORION 10-April-79 Check for OPRs that have logged out on Monitor
Logout Messages
206 ORION 12-April-79 Add SWITCH Command for the -20
207 ORION 18-April-79 Fix Send Command
210 ORION 24-Apr-79 Pass Node Name for Dn60 Instead of Port and Line
in the Output Display Messages
211 ORION 2-May-79 Remove Debug Check from Wheel Check.
Fix Report Bug
212 ORION 14-May-79 Send WTOR replies to the terminal if WT.NFY is
on in WTOR and the Send fails from PID going
away.
213 ORION 16-May-79 Change FNDNOD and remove G$DN60
214 ORION 17-May-79 Add G$ASND to force messages to OPR on SEND
OPERATOR and ENA/DIS Logging
215 ORION 18-May-79 Fix SEND ACK bug of not releasing Output page
on ack code of zero error.
216 ORION 21-May-79 Correct Privilege checking of OPRHEL message
USE P2,P3 IN RSDMSG INSTEAD OF T1,T2
217 ORION 22-May-79 Have EXPTAB Update OPR data base with new
table addresses
Add DELNOD code and .QONWA for deleting an
OPR if Node goes away
220 ORION 30-May-79 Support the Wait action routine in OPRPAR
Change the BLDSND format
221 ORION 1-Jun-79 Have DELNOD only delete Oprs for DN60 Nodes
222 ORION 4-Jun-79 Change the W$CHEK routine to bypass wheels and
to be called before messages are built
223 ORION 12-Jun-79 Remove the use of PB as a parser AC or P$
routine requirement.
224 ORION 14-Jun-79 On WTO/WTOR/ACK check for .OTMNT format
of the Object Block
225 ORION 2-Jul-79 Add ENABLE/DISABLE FILE-RETREVIAL WAITS
226 ORION 9-Jul-79 Remove the MOUNT command
227 ORION 11-Jul-79 Remove the Unload command and add new form of
DISMOUNT
230 ORION 13-Aug-79 Support WT.KAL for user to cancel all messages
for a Job
231 ORION 14-Aug-79 Add DN60 Node Online and Offline support
232 ORION 20-Aug-79 Correct Ack bug on killed WTO messages
233 ORION 11-Sept-79 Create ERRALL routine to send error messsages
to all Operators
234 ORION 12-Sept-79 Add word to .ACKID block to RESPOND message to
contain terminal number or SIXBIT node name
indicating where message came from
235 ORION 13-Sept-79 Trap returned IPCF messages and check for OPR's
to delete
236 ORION 8-Oct-79 Add -10 MDA commands
240 ORION 15-Oct-79 Delete the Type Line width range check in
W$VALID
241 ORION 26-Oct-79 Add automatic detacher if FRCLIN startup on -10
242 ORION 02-Nov-79 Fixup system message reciever, and handle
the new QUEUE. UUO messages
243 ORION 13-Nov-79 Noop user name block from QUEUE. messages
244 ORION 17-Dec-79 Change .OTxxx (tape and disk messages)
to .ODxxx
Add MODIFY <syslet list> message for the -10
245 ORION 26-Feb-80 In CHKNOD and GETNOD, return via I%HOST if
NODE. UUOs fail. Allows ORION to work on
monitors with FTNET off.
246 ORION 5-Mar-80 Add support for TOPS-10 SEND ALL
247 ORION 11-Mar-80 Put MOUNT STRUCTURE back in for the -10
250 ORION 11-Mar-80 10- Force SYSTEM and LOCAL OPRs to be
built at central site
251 ORION 12-Mar-80 Set up senders PID before calls to VALOPR for
the DISABLE/ENABLE commands.
252 ORION 17-MAR-80 Change ROUTE message type to .OMRTD
OPRQSR 17-MAR-80 Change Q$ROUTE to support DEVICE routing
253 ORION 24-Apr-80 Chage W$JOBH to supply "Message From Timesharing
User" if no type field specified.
254 ORION 8-May-80 Add SET USAGE code for TOPS10
255 ORION 9-May-80 Lower case errors and get TOPS20 assembly
256 ORION 15-May-80 Change BLOCK declarations to $DATA
257 ORION 11-Jun-80 Fix up CHKWTO so OPR doesn't report any
outstanding messages that don't exist.
260 ORION 13-Jun-80 Fix bug in TOPS-10 send all code where very
long lines are sent.
261 ORION 19-Jun-80 Move the call to DETACH up before the call to
I%INIT.
262 ORION 24-Jun-80 If a GETTAB fails trying to determine the line
number of FRCLIN, take error return and don't
stopcode.
263 ORION 21-Jul-80 Fix the code in OPRHEL (and support routines)
so that we can run with monitors without
network support.
264 ORION 6-Aug-80 Patch problems with ORION doing its own
"memory management". Have GETPAG and
RELPAG only update MO and get/release the
page. Add SQSD60 routine.
265 ORION 18-Sep-80 QAR # 10-04655 Fix GETJOB to let 0 be
valid terminal number and -2 indicator
of detached job. Fix GETUSR to use the
types correctly
266 ORION 22-Sep-80 Change a few PJRSTs and JRSTs to PUSHJ P,
$RET so it is possible to get a vague idea
of where the error came from.
267 ORION 23-Sep-80 Fix so initialization causes auto detach
270 ORION 26-Sep-80 On TOPS-10, make SEND ALL/NODE work.
271 ORION 14-Oct-80 QAR's 10-04638 & 10-04673. Fix it so
a job can only have one OPR at a time.
272 ORION 20-Oct-80 Figure the difference between a node number
and a node name in NODONL
273 ORION 22-Oct-80 Fix OPRDPY to specify ^N with node names
274 ORION 6-Nov-80 Allow QUASAR to have more than one operator for
the DN60.
275 ORION 29-Aug-80 Add FAL and FTS object types
and save some edit numbers for
release 4.1
276 ORION 9-Dec-80 Add remote operator priv checks
and modify the meaning of local
to mean the physical terminal
location.
277 ORION 17-Dec-80 Increase PDL size so P$HELP won't
stopcode for remote DN200 OPR's
300 ORION 30-Dec-80 If debugging, make CHKWHL return true
301 ORION 13-Jan-81 Change TRMOP function to be .TODSP instead
of .TOOUS in SNDTTY to prevent TO state.
302 ORION 16-Jan-81 Change processing of report command to read
actual device name instead of a misc. field
303 ORION 16-Jan-81 Clean up SHOW OPERATOR display show that junk
won't show up in node column if node name is
less than 6 characters.
304 ORION 26-Jan-81 Correct definition and use of the system OPR
bit so it is of the form .OBxOP (all the others
are like that). *** Note *** error in UUOSYM
must also be corrected.
305 ORION 10-Feb-81 Change routine getjob to allow node information
OPRLOG to be included in the textual job information.
Needed for logging same information.
306 ORION 11-Feb-81 Rework the privs. Make LOCAL into HOST.
ORNMAC In general, try to clean up mechanisms.
307 ORION 13-Feb-81 Try to make the SEND ALL work
310 3/9/81 Make ORION respect the TTY NO GAG bit when doing notifies.
311 3/10/81 End the TOPS-10 conditional about GLOC
Place conditionals around TOPS-10 styledi priv. checking
Make OPRENB on the 20 only do CHKWHL
312 3/11/81 Send acks when the send is complete
313 3/23/81 Make W$CHEK cancel batch jobs who do WTORs when the're not
supposed to. Make W$ACKM tell the world when the ACK code
is zero. Make WTOTYP allow unprived users to supply type
text in WTO/WTOR messages, but change it to "Message from..."
junk. This way, a program doing QUEUE. UUOs need not determine
if it has the necessary privs to do the UUO.
314 3/30/81 Add a debug stopcd. to help trace spurious bugs such as
illegal format command message.
315 4/28/81 Store the Node name in OPRHEL into G$ARG1 so any error
message knows the correct node name in error.
316 5/21/81 Add the routine TTYNOD to be called by SNDALL to check for
any actual lines on a particular node to see if OK
to send to that node.
Use S1 as the place where to find the text in SNDALX.
317 5/23/81 Some more work to make SNDALL work on the 10. Fix two errors
in the TOPS10 version of TTYNOD. Change the SENDALL code
to always give the operator an ACK. Store the node name
in P1 before calling TTYNOD and remove the two lines that
follow the call.
320 7/22/81 Fix problem with OPR displays only showing -- -- for the
type line display due to ITEXT being clobbered.
321 8/20/81 Return the users ack code in application hello acks
322 8/24/81 Control remote DN60 operator privs @CHKWHL.
323 9/30/81 Clean up strange NODE/LINE/TTY notation in log file entries.
324 9/30/81 Fix it so a component besides QUASAR can cause a
display message ack to occur in W$SHOW. Remove routine CHKQSR.
325 11/3/81 Remove check for length of type argument in W$VALID.
326 11/27/81 WT.NFO means don't format the WTO text, so don't do it.
Remove line length restrictions since the monitor knows
when to wrap around a TTY output better that ORION does.
327 12/28/81 .REQUIRE application tables. Don't check for OPR/ORION
version skews. There are already enough sanity checks.
330 1/5/82 Be consistent, and put -- text -- not --text-- for all
messages. Some do it one way, others the other.
331 2/2/82 Reduce the number of bytes allowed to be sent @OPRMES+3
since ORION pretends that messages may have a 777 length.
332 6/3/82 Fix a number of places where GLXLNK routines are called
but false returns are not checked. GCO 4.2.1362
333 6/3/82 Fix NSL crashes where MSGNOD expects T1 to be preserved
across a multilevel call. GCO 4.2.1363
334 6/7/82 Load central site station number if OPR has HOST privs,
not his physicaly located node number. GCO 1370
335 6/28/82 Dont type out -- 3 outstanding message(s) -- if there
is no operator on duty to read them. GC0 4.2.1404
336 7/18/82 Support WT.SND in WTO/WTORs. GCO 1451
337 7/22/82 Use the HOST site node name when cancelling a batch
job from a stream where intervention is disallowed. GCO 4.2.1460.
340 8/25/82 On the 20, check the remote bit in the hello message
and set the privs based on it. GCO 4.2.1501
341 8/27/82 Don't set up things twice by removing some lines in
SNDBAT. GCO 4.2.1505
342 11/9/82 Fix copyright. GCO 4.2.1528
343 5/3/84 Make into a system process by setting IB.SYS in IB. GCO 4.2.1576
344 2/15/85 Allow device attributes of greater than zero to be valid when
analyzing WTO object blocks. GCO 4.2.1608
410 Increase version 4.2 maintenance edit number to correspond with version
5 maintenance edit number.
\
COMMENT \
THIS MODULE IS THE MAIN LOOP FOR ORION. IT RECEIVES ALL IPCF MESSAGES
AND DISPATCHES TO THE CORRECT PROCESSING ROUTINE. IT ALSO CONTAINS
ALL THE CODE TO INITIALIZE THE NEEDED GLX MODULES.
\
SUBTTL Constants and declarations
XP PDLEN,^D200 ;Size or our PDL
SUBTTL Global Storage
$DATA PDL,PDLEN ;OUR PDL
$DATA G$STAD,0 ;START OF DATA AREA
$GDATA G$HOST,1 ;NODE NAME OF CENTRAL SITE
$GDATA G$HSTN,1 ;NODE NUMBER OF CENTRAL SITE
$GDATA G$NOW,1 ;CURRENT TIME OF DAY
$GDATA G$OPR,1 ;T/F FOR OPR ON DUTY
$GDATA G$ERR,1 ;ERROR CODE FOR ACK'ING THIS MESSAGE
$GDATA G$SEQ,1 ;GLOBAL SEQUENCE NUMBER FOR
;OPR DISPLAYS.
$GDATA G$FLAG,1 ;SENDER'S FLAGS (FROM IPCF MESSAGE)
$GDATA G$SND,1 ;SENDER'S PID
$GDATA G$PRVS,1 ;SENDER'S PRIVS (FROM IPCF MESSAGE)
$GDATA G$SID,1 ;SENDER'S ID
$GDATA G$JOB,1 ;SENDER'S JOB NUMBER
$GDATA G$NODE,1 ;SENDER'S NODE NAME (SIXBIT)
$GDATA G$NODX,2 ;SENDER'S NODE NAME (ASCII)
$GDATA G$PRIV,1 ;SENDER'S PRIVS
$GDATA G$NODL,1 ;NODE LIST NUMBER
$GDATA G$OPRA,1 ;OPR ADDRESS ORIGINATING REQUEST
$GDATA G$ASND,1 ;FLAG TO FORCE SENDS OF MESSAGE
$GDATA G$JDAT,1 ;BATCH-STREAM..WTO BITS
$GDATA G$OUTP,1 ;OUTPUT MESSAGE PAGE FLAG
$GDATA G$ARG1,1 ;ERROR ARGUMENT 1
$GDATA G$ARG2,1 ;ERROR ARGUMENT 2
$GDATA G$ARG3,1 ;ERROR ARGUMENT 3
$GDATA G$SNDF,1 ;COUNT OF SEND FAILURES
$GDATA G$RSDL,1 ;LIST NUMBER FOR RESEND ENTRIES
$GDATA G$NSNT,1 ;COUNT OF MESSAGES NOT SENT YET
$GDATA G$SNDL,1 ;LIST FOR MESSAGES NOT SENT YET
$GDATA G$RSDC,1 ;NUMBER OF MESSAGES TO RESEND COUNT
$GDATA G$CHKM,1 ;WTOR MESSAGE CHECK REQUESTED
$GDATA G$MSGC,1 ;NUMBER OF THE MESSAGE BEING PROCESSED
$GDATA G$SFPD,1 ;SEND FAILURE PID
$GDATA G$MJOB,1 ;ORIONS JOB NUMBER
$GDATA G$MAXP,1 ;MAXIMUM PACKET SIZE
TOPS20<
$GDATA G$NETL,1 ;NETWORK SERVER LIST
>;END TOPS20
$GDATA G$2SCR,2 ;2 WORD GENERIC SCRATCH SPACE
SUBTTL Main Data Storage
;TEMPORARY STORAGE FOR TEXT MOVER
$DATA TXTPTR,1 ;SAVE AREA FOR BYTE POINTER
$DATA PARBLK,PAR.SZ ;PARSER CALL BLOCK
$DATA PARBUF,1 ;PARSER BUFFER POINTER
$DATA SNDBLK,SAB.SZ ;SEND BLOCK FOR MESSAGES
$DATA SNDPTR,1 ;SEND ROUTINE POINTER
$DATA TABADR,1 ;OPR DATA BASE ADDRESS
$DATA TABFRE,1 ;OPR DATA BASE FREE COUNT
$DATA TABCNT,1 ;OPR DATA BASE AVAILABLE COUNT
;BYTE POINTER AND COUNTER FOR COMMON TEXT STORAGE ROUTINE
$DATA STRBP,1 ;BYTE POINTER WORD
$DATA STRCT,1 ;BYTE COUNT WORD
TOPS10<
;PLACE FOR OPERATORS PPN
$DATA OPRPPN,1 ;OPR PPN ON -10
$DATA FRCLIN,1 ;LINE NUMBER OF 'FRCLIN'
$DATA SNDTXT,^D15 ;TEXT BUFFER FOR 'SEND ALL' (72 CHR MAX)
>;END TOPS10
SUBTTL WTO storage
$DATA WDATXT,1 ;WTO TEXT DATA ADDRESS
$DATA WDAOBJ,1 ;WTO OBJECT BLOCK ADDRESS
$DATA WDAOBT,1 ;WTO OBJECT TYPE
$DATA WDADES,1 ;WTO DESTINATION VALUE
$DATA WDAJOB,1 ;WTO JOB NUMBER
$DATA WDAERR,1 ;WTO ERROR CODE
$DATA WDARTE,1 ;WTO ROUTE CODE
$DATA WDATYP,1 ;WTO TYPE CODE
$DATA WDAANS,1 ;WTO ANSWER BLOCK
$DATA WDAFLG,1 ;WTO FLAG WORD
$DATA WDAACD,1 ;WTO APPLICATION CODE BLOCK
WDAEND==WDAACD ;END OF WTO FIELDS
$DATA WTOCNT,1 ;COUNT OF OUTPUT BYTES IN MESSAG
$DATA WTOPTR,1 ;OUTPUT BYTE POINTER
$DATA SRCPTR,1 ;SOURCE POINTER
$DATA DESPTR,1 ;DESTINATION POINTER
$DATA DESCNT,1 ;DESTINATION COUNT
$DATA RSDCNT,1 ;RESEND COUNT OF OPRS TO SEND TO
$DATA MSGCNT,1 ;COUNT OF OPRS RECIEVING THIS MESSAGE
$DATA OPRRCT,1 ;COUNT OF ENTRIES IN RESEND LIST
$DATA OPRRSL,1 ;OPR RESEND LIST NUMBER
$DATA PAGFLG,1 ;PAGE MESSAGE TO BE SENT
$DATA NOALTN,1 ;NO ALTERNATE NODES ON SEND FLAG
$DATA SCRWRD,1 ;SCRATCH WORD FOR EACH COMMAND
;JOB RELATED DATA FOR LOG AND DISPLAY
$GDATA JOBNUM,1 ;JOB NUMBER
$GDATA JOBTTY,1 ;JOB TERMINAL NUMBER
$GDATA JOBNOD,1 ;Job's node
$GDATA JOBLIN,1 ;Job's line
$GDATA JOBUSN,2 ;JOB USER NAME
$GDATA JOBNAM,1 ;JOB PROGRAM NAME
$GDATA JOBJLT,1 ;JOB LOGGED IN TIME
$GDATA JOBID,1 ;JOB NUMBER OR PPN
$GDATA JOBTER,1 ;ITEXT ADDRESS FOR TERMINAL DATA
$GDATA JOBTXT,1 ;ITEXT FOR JOB HEADER LINE
$DATA SFLADR,1 ;ADDRESS OF SEND FAIL PIDS TABLE
$DATA SFLCNT,1 ;NUMBER OF POSSIBLE ENTRIES IN TABLE
$DATA SFLFRE,1 ;NUMBER OF FREE ENTRIES
;NSP DATA FOR LINKS
TOPS20<
$DATA LEV1PC,1 ;PC FOR LEVEL 1 INTERRUPT
$DATA LEV2PC,1 ;PC FOR LEVEL 2 INTERRUPT
$DATA LEV3PC,1 ;PC FOR LEVEL 3 INTERRUPT
$GDATA TRMFRK,1 ;FORK TERMINATION FLAG
$GDATA NSPCON,1 ;CONNECT INTERRUPT FLAG -1..CONNECT
$GDATA NSPACT,1 ;FLAG FOR NSP SETUP -1..ACTIVE
$GDATA NODNAM,2 ;NODE NAME FOR CURRENT CONNECT
$GDATA SRVDAT,2 ;STORAGE FOR SERVER DATA CHECK
$GDATA SRVTBL,SRV.SZ*NUMSRV ;ALLOCATE TABLE SPACE
$GDATA SRVACS,20 ;BLOCK FOR THE ACS
$DATA NFYDIR,1 ;NOTIFY DIRECTORY BLOCK
$DATA NFYSUB,1 ;SUBJECT POINTER
$DATA NFYTXT,1 ;TEXT POINTER
$DATA SCHBLK,10 ;SCHEDULER DATA WORDS
>;END TOPS20
$DATA DATEND,0 ;END OF THE DATA AREA
DATASZ==G$STAD-DATEND ;SIZE OF THE DATA AREA
FNDXCT: CAMN P1,MSL.ID(S2) ;MATCH INSTRUCTION
NULTXT:: ITEXT (<>)
SUBTTL Interrupt vector definitions
TOPS20<
LEVTAB:: EXP LEV1PC
EXP LEV2PC
EXP LEV3PC
DEFINE CHNBLD(AA,BB),<
XWD IPCLEV,N$INI'AA##
XWD IPCLEV,N$INI'BB##
>;END CHNBLD
CHNTAB:: BLOCK 1
XWD IPCLEV,INT
BLOCK CHNSRV-2
ZZ==0
YY==1
REPEAT NUMSRV,<CHNBLD(\ZZ,\YY)
ZZ==ZZ+2
YY=ZZ+1>
BLOCK ^D36-<CHNSRV+<2*NUMSRV>> ;EDIT 145
>;END TOPS20
TOPS10<
INTVEC:
IPCINT: $BUILD .PSVIS+1
$SET(.PSVNP,,INT)
$EOB
>;END TOPS10
SUBTTL Initialization block
IPBBLK: $BUILD IB.SZ
$SET(IB.FLG,IP.STP,1) ;SET FOR STOPCODES TO CATCH ANY CRASHES
;**;[343]At IPBBLK:+1L Add 1 line JCR 5/3/84
$SET(IB.FLG,IB.SYS,1) ;[343]Set as a system process
$SET(IB.PRG,,%%.MOD) ;PROGRAM NAME
IFN FTDN60,<
$SET(IB.OUT,,OUTRTN) ;NO DEFAULT SETUP
>;END FTDN60
IFE FTDN60,<
$SET(IB.OUT,,.RETT) ;NULL OUTPUT ROUTINE
>;END FTDN60
TOPS20<
$SET(IB.INT,,<LEVTAB,,CHNTAB>)
>;END TOPS20
TOPS10<
$SET(IB.INT,,INTVEC)
>;END TOPS10
$SET(IB.PIB,,PIBBLK) ;ADDRESS OF PID BLOCK
$EOB
PIBBLK: $BUILD PB.MXS ;SIZE OF BLOCK
$SET(PB.HDR,PB.LEN,PB.MXS) ;MAXIMUM SIZE OF BLOCK
$SET(PB.SYS,IP.MNP,^D10) ;ALLOW FOR 10. PIDS
$SET(PB.SYS,IP.BQT,-1) ;SEND AND RECEIVE TO MAX.
$SET(PB.FLG,IP.RSE,1) ;RETURN ON SEND ERRORS
$SET(PB.FLG,IP.PSI,1) ;CONNECT PID TO PSI
$SET(PB.FLG,IP.SPB,1) ;SET IF IPCF SENDER WAS PRIVILEGED
$SET(PB.FLG,IP.JWP,1) ;GET JOB WIDE PID
$SET(PB.INT,IP.SPI,SP.OPR) ;SYSTEM ORION
TOPS10< $SET(PB.INT,IP.CHN,<IPCINT-INTVEC>)> ;OFFSET FOR IPCF BLOCK
TOPS20< $SET(PB.INT,IP.CHN,1)> ;CHANNEL FOR IPCF
$SET(PB.LOC,,<-1,,G$NODX>) ;SPACE FOR LOCATION STRING
$EOB
;DEFINE THE OBJECT BLOCK
DEFINE X(A,B),<$SET(.OT'B,,.ZZ)
.ZZ==.ZZ+1>
OBJBLK: $BUILD .OTMAX+1 ;MAXIMUM NUMBER OF OBJECTS
.ZZ==1 ;SETUP ENTRIES
OBJORN ;EXPAND ENTRIES
$EOB ;END OF BLOCK
SUBTTL ORION Main entry and initialization
ORION: RESET ;RESET THE WORLD
MOVE P,[IOWD PDLEN,PDL] ;SET UP STACK POINTER
MOVX S1,IB.SZ ;GET THE SIZE OF THE IPB
MOVEI S2,IPBBLK ;GET ADDRESS OF THE IPB
$CALL I%INIT## ;INITIALIZE THE IPCF INTERFACE
MOVEI S1,DATASZ ;SIZE OF THE DATA BASE
MOVEI S2,G$STAD ;START OF DATA BASE
$CALL .ZCHNK ;ZERO THE DATA BASE
$CALL I%NOW ;GO GET THE DATE/TIME
MOVEM S1,G$NOW ;SAVE AS THE CURRENT TIME
SETZM G$SEQ ;CLEAR GLOBAL SEQUENCE NUMBER
$CALL L%CLST ;CREATE NODE LIST
MOVEM S1,G$NODL ;SAVE THE NUMBER
$CALL L%CLST ;CREATE A LIST
MOVEM S1,G$RSDL ;SAVE AS RESEND LIST
$CALL L%CLST ;CREATE A LIST
MOVEM S1,G$SNDL ;SAVE AS UNSENT LIST
$CALL L$INIT## ;INIT LOG ROUTINE
SKIPE LOGINT## ;LOGGING ENABLED?
$CALL L$OPNL## ;OPEN ORIONS LOG FILE
$CALL EXPTAB ;SETUP OPR TABLE AND OPR RESEND TABLE
$CALL I%ION ;LIBRARY TURN ON INTERRUPTS
$CALL ORNINT ;SETUP ORION NEEDED DATA
JRST MAIN ;NOW GO ENTER MAIN LOOP
SUBTTL MAIN IPCF message processing loop
;THIS ROUTINE RECEIVES THE NEXT IPCF MESSAGE FROM THE QUEUE WHEN IT IS
;AVAILABLE, CHECKS ITS FORMAT, AND DISPATCHS ON ITS TYPE
MAIN: $CALL I$SYSV ;GET SYSTEM VARIABLES
$CALL C%RECV ;CHECK FOR MESSAGE
JUMPT MAIN.0 ;IF A MESSAGE, PROCESS IT
TOPS20<
SKIPE NSPCON ;DID WE GET A CONNECT
$CALL N$CONN## ;PROCESS THE CONNECT
SKIPE TRMFRK ;FORK TERMINATIONS?
$CALL N$TERM## ;TERMINATE FORK AND LINKS
>;END TOPS20
MOVEI S1,0 ;SLEEP UNTIL SOMETHING TO DO
$CALL I%SLP ;SLEEP AND/OR PROCESS TIMERS
JRST MAIN ;GO TO MAIN
;Here when there is a message
MAIN.0: SETZM G$ERR ;CLEAR ERROR FLAG
MOVE P1,S1 ;COPY MDB ADDR TO P1
LOAD MI,MDB.MS(P1),MD.ADR ;GET MESSAGE ADDRESS
LOAD S1,MDB.FG(P1),IP.CFC ;GET SYSTEM SENDER WORD
JUMPE S1,MAIN.1 ;NOT FROM SYSTEM SENDER, CHECK IT OUT
MOVE S2,P1 ;AIM AT THE MDB
$CALL SYSMSG ;SEE IF IT NEEDS SPECIAL PROCESSING
JUMPT MAIN.2 ;ALL DONE, FLUSH IT
MAIN.1: LOAD S1,MDB.FG(P1),IP.CFM ;LOOK AT PACKET HEADER
CAXN S1,.IPCFN ;IS IS A RETURNED MESSAGE?
JRST MAIN.3 ;CHECK FOR OPR AND THEN PITCH
MOVE S2,P1 ;AIM AT THE MDB
$CALL PROIPC ;CALL DISPATCH AND CHECKING AS SUBROUTINE
MOVE S1,.MSFLG(MI) ;GET MESSAGE FLAGS
MOVEM S1,G$FLAG ;SAVE THE MESSAGE FLAGS
LOAD S1,G$FLAG,MF.ACK ;ACK REQUESTED?
SKIPN S1 ;SKIP IF REQUESTED
MAIN.2: SKIPE G$ERR ;ALWAYS SEND ACK ON ERROR
$CALL G$ACK ;ACKNOWLEDGE THE MESSAGE
SKIPE G$ERR ;WAS THERE AN ERROR
$CALL L$ERR## ;LOG THE ERROR
$CALL C%REL ;RELEASE THE MESSAGE
JRST MAIN ;AND LOOK FOR MORE MESSAGES
;Here on a returned message
MAIN.3: MOVE S1,MDB.SP(P1) ;GET THE SENDERS PID
$CALL VALOPR ;CHECK IS IT WAS AN OPR
JUMPF MAIN.2 ;RELEASE IT AND CONTINUE ON
MOVE S1,MDB.SP(P1) ;GET THE SENDERS PID
$CALL DELOPR ;DELETE THE OPR
JRST MAIN.2 ;CONTINUE ON
SUBTTL I$SYSV - Get system variables
;This routine fetchs the system variables that may be changing.
;Currently there are:
; G$NOW/ current UDT
; G$OPR/ true/false for operator on duty
;(routine name and most code borrowed from I$SYSV in QSRTxx)
I$SYSV: $CALL I%NOW ;GET CURRENT TIME
MOVEM S1,G$NOW ;SAVE FOR THE WORLD TO KNOW
TOPS10 <
SETOM G$OPR ;ASSUME OPERATOR ON DUTY
MOVX S1,%CNSTS ;GETTAB ARGS
GETTAB S1, ;GET THE MONITOR'S STATES WORD
SETZ S1, ;SICK MONITOR
TXNE S1,ST%NOP ;CHECK
SETZM G$OPR ;NO OPERATOR ON DUTY
>
TOPS20 <
SETOM G$OPR ;ASSUME OPERATOR ON DUTY
MOVX S1,.SFOPR ;GET FUNCTION CODE
TMON ;ASK MONITOR FOR OPR IN ATTENDANCE
SKIPN S2 ;ANYONE AROUND ???
SETZM G$OPR ;NO
>
$RET ;AND RETURN
SUBTTL REQTIM Routine to put a request on the event queue
;ACCEPTS S1/ UDT or 0,,Milliseconds
; S2/ PC of routine to be called
;The routine will be called at the appropriate time from I%SLP
REQTIM::STKVAR <<TIMBLK,.TIMPC+1>> ;Get request block
MOVEM S1,.TITIM+TIMBLK ;Save request time
MOVEM S2,.TIMPC+TIMBLK ;Save the event PC
MOVEI S2,.TIMEL ;Assume elapsed time
TLNE S1,700000 ;Unless date is present
MOVEI S2,.TIMDT ;Request UDT
MOVEM S2,.TIFNC+TIMBLK ;Save the function
SETZM .TIPSI+TIMBLK ;Clear PSI word
MOVEI S1,.TIMPC+1 ;Get length of request
MOVEI S2,TIMBLK ;Get address of block
$CALL I%TIMR ;Place on the timer queue
$RET ;Return true/false per timer
SUBTTL PROIPC Process an IPCF message
;CALL -
; S2/ MDB ADDRS
; MI/ INCOMING MESSAGE ADRS
PROIPC: $SAVE <P1> ;PRSERVE SOME SPACE
MOVE P1,S2 ;COPY THE MDB POINTER
AOS G$MSGC ;BUMP COUNT OF MESSAGES
SETZM G$OPRA ;CLEAR OPERATOR ADDRESS WORD
SETZM G$ASND ;ALWAYS SEND FLAG OFF
LOAD S1,MDB.PV(P1) ;GET THE SENDER'S PRIVS
STORE S1,G$PRVS ;SAVE FOR ALL
LOAD S1,S1,MD.PJB ;GET THE JOB NUMBER
STORE S1,G$JOB ;SAVE FOR ALL
MOVEI S2,JI.TLC ;GET PHYSICAL LOCATION
$CALL I%JINF
MOVEM S2,G$NODE ;SAVE FOR ALL TO SEE
LOAD S1,MDB.SD(P1) ;GET SENDER'S ID
STORE S1,G$SID ;SAVE FOR ANYONE
MOVE S1,MDB.SP(P1) ;GET THE PID
MOVEM S1,G$SND ;SAVE THE PID
SKIPN G$SND ;CHECK FOR ZERO PID
PJRST E$IPS ;INVALID PID SPECIFIED
LOAD S1,.MSTYP(MI),MS.CNT ;GET THE LENGTH FROM THE HEADER
LOAD S2,MDB.MS(P1),MD.CNT ;AND FROM THE MDB
CAMLE S1,S2 ;SENDER'S LENGTH BETTER BE CORRECT
JRST E$BML ;BAD MESSAGE LENGTH
LOAD T1,.MSTYP(MI),MS.TYP ;GET MESSAGE TYPE
MOVEM T1,G$ARG1 ;SAVE MESSAGE TYPE
CAIG T1,.OMOFF ;VALID ORION MESSAGE
JRST PROI.2 ;CHECK QUASAR MESSAGES
CAIN T1,.OMCMD ;IS IT A COMMAND
JRST PROI.1 ;BYPASS MSGCHK AND CONTINUE
MOVE S2,P1 ;COPY OVER THE MDB POINTER
$CALL MSGCHK ;CONSISTENCY CHECK THE MESSAGE
$RETIF ;BAD RETURN..RETURN
PROI.1: LOAD S1,.MSTYP(MI),MS.TYP ;GET THE MESSAGE TYPE
MOVEI S2,MANTAB ;ENABLE DISPATCH TABLE
$CALL TABSRC ;SEARCH THE TABLE
JUMPF E$IMT ;ERROR..IGNORE THE MESSAGE
PUSHJ P,(S2) ;Process the routine
$RET ;Return, preserving the return
PROI.2: CAIE T1,.QONWA ;NODE WENT AWAY
$RETF ;RETURN FALSE
PJRST DELNOD ;DELETE NODE ROUTINE
MANTAB: $STAB
.OMWTO,,W$WTO ;WRITE TO OPERATOR
.OMCMD,,COMMAN ;COMMAND MESSAGE(FROM OPR PARSER PROGRAM)
.OMWTR,,W$WTOR ;WTOR FOR NOW
.OMACK,,W$ACKM ;WTO FOR NOW
.OMACS,,W$SHOW ;SHOW ACK RESPONSE FROM QUASAR
.OMOHL,,OPRHEL ;OPR HELLO MESSAGE
.OMOSR,,OPRSET ;OPR SETUP REPLY
.OMAHL,,APLHEL ;APPLICATION HELLO MESSAGE
.OMLOG,,W$LOGM ;LOG MESSAGE
.OMNFY,,NOTIFY ;NOTIFY CODE
.OMTKE,,TAKEND ;END OF TAKE COMMAND
IFN FTDN60,<
.OMD60,,CMDMES ;COMMAND MESSAGE FROM CDRIVE
>;END FTDN60
.OMDSP,,RETMES ;RETURNED DN60 DISPLAY MESSAGE
$ETAB
SUBTTL SYSMSG Process system messages
;THIS ROUTINE WILL PROCESS SYSTEM MESSAGES
; IT MAY MASSAGE THE MESSAGES TO LOOK LIKE 'REGULAR'
; ORION IPCF MESSAGES, OR IT MAY PERFORM SOME SPECIFIC ACTION
; IT RETURNS TRUE IF THE MESSAGE NEEDS NO FURTHER PROCESSING,
; AND FALSE (AFTER SOME MASSAGING), IF IT NEEDS MORE WORK
;CALL -
; S1/ SYSTEM SENDER CODE
; S2/ MDB ADRS
; MI/ ADDRS OF THE INCOMING MESSAGE
;RETURN -
; TRUE/ MESSAGE PROCESSED
; FALSE/ MESSAGE NEEDS MORE PROCESSING
SYSMSG: LOAD TF,MDB.FG(S2),IP.CFE ;GET THE ERROR CODE
JUMPN TF,.RETT ;IF ANYTHING IS WRONG, PITCH THE MESSAGE
$SAVE <P1> ;SAVE SOME SPACE
MOVSI P1,-SYCMLN ;LENGTH OF THE KNOWN SYSTEM COMPONENTS
SYSM.1: HLRZ TF,SYCMPN(P1) ;GET FIRST KNOWN INDEX
CAIE TF,0(S1) ;DO WE UNDERSTAND THINGS FROM THIS PROC?
AOBJN P1,SYSM.1 ;NO, TRY THE NEXT
JUMPGE P1,.RETT ;UNKNOWN PSUEDO PROCESS, FLUSH IT
HRRZ P1,SYCMPN(P1) ;GET DISPATCH ADRS
$CALL 0(P1) ;FIDDLE WITH THE MESSAGE
$RETIT ;LOOKS GOOD, GO CLEAN UP
SKIPN G$ERR ;NOT QUITE, ANY ERRORS?
$RETF ;NO, JUST CONTINUE MORE PROCESSING
$RETT ;REAL ERRORS, JUST FLUSH THE MESSAGE
SYSPRM .IPCCC,.IPCCC,.IPCCC ;IPCC PSUEDO-PROCESS INDEX
;A table of exec psuedo-process identifiers,,dispatch routine adrs
;Each routine will be called with
; MI/ Message adrs
; S2/ MDB adrs
SYCMPN: XWD .IPCCC,IPCCMS ;WHERE TO GO ON MESSAGES FROM IPCC
TOPS10<
XWD .IPCCG,GOPHMS ;MESSAGE FROM GOPHER
>;END TOPS10
SYCMLN==.-SYCMPN ;LENGTH OF THE TABLE
SUBTTL IPCCMS Process messages from [SYSTEM]IPCC
;CALL -
; MI/ INCOMING MESSAGE FROM IPCC
; S2/ MDB ADRS
;RETURNS -
; TRUE/ MESSAGE PROCESSED
; FALSE/ MORE PROCESSING REQUIRED
SYSPRM LOGMSK,RHMASK,FWMASK ;MASK TO GET JOB NUMBER
SYSPRM OB.BSN,OB.BSN,OB%BSN ;BATCH STREAM NUMBER FIELD
IPCCMS: LOAD S1,LGO.HD(MI),LOGMSK ;GET FUNCTION CODE
CAIN S1,.IPCSL ;LOGOUT MESSAGE
JRST IPCC.0 ;YES, HANDLE IT
TOPS10 <
CAIN S1,.IPCQU ;NO, IS IT A STRANGE WTO?
JRST GOPHMS ;YES, PRETEND IT CAME FROM GOPHER
> ;END TOPS10
$RETT ;NO, FLUSH IT
;HERE ON A LOGOUT MESSAGE
IPCC.0: $SAVE <P1,P2,P3>
LOAD S1,LGO.JB(MI),LG.JOB ;GET THE JOB NUMBER
STORE S1,G$PRVS,MD.PJB ;SAVE THE JOB NUMBER
STORE S1,G$JOB ;DITTO
MOVX S2,MSL.JB ;MATCH ON JOB NUMBER
HRRM S2,FNDXCT ;SAVE IN COMPARE
$CALL FNDMSG ;FIND THE MESSAGE
JUMPF IPCC.2 ;NONE..TRY ANY OPRS TO DELETE
IPCC.1: SETZ P1, ;CLEAR P1 FOR SCRATCH
EXCH P1,G$ERR ;SAVE ERROR CODE
MOVX S1,E$JLO ;JOB LOGGED OUT
$CALL W$KMES ;KILL THE MESSAGE
$CALL L$KMJB## ;LOG THE MESSAGE
MOVEM P1,G$ERR ;RESTORE THE ERROR CODE
LOAD S1,G$JOB ;GET JOB NUMBER
$CALL NXTMSG ;GET THE NEXT MESSAGE
JUMPT IPCC.1 ;KILL OTHER MESSAGES ALSO
IPCC.2: LOAD P3,G$JOB ;GET JOB NUMBER
MOVE P1,TABADR ;GET THE TABLE ADDRESS
MOVE P2,TABCNT ;MAXIMUM NUMBER OF ENTRIES
SUB P2,TABFRE ;GET ACTIVE OPRS
SKIPN P2 ;ANY OPRS RUNNING?
$RETT ;NONE SETUP SO FAR..RETURN
IPCC.3: SKIPN T2,TOP.OA(P1) ;GET OPR ENTRY ADDRESS
JRST IPCC.5 ;ZERO..TRY NEXT ONE
CAME P3,OPR.JB(T2) ;CHECK JOB FOR MATCH
JRST IPCC.4 ;MATCH..SETUP FOR RETURN
MOVE S1,OPR.PD(T2) ;GET THE PID
$CALL DELOPR ;DELETE THE OPR
IPCC.4: ADDI P1,TOP.SZ ;BUMP TO NEXT ENTRY
SOJG P2,IPCC.3 ;LOOP THROUGH ALL ENTRIES
$RETT ;NO SUCH OPR, ALL DONE WITH LOGOUT
IPCC.5: ADDI P1,TOP.SZ ;BUMP TO NEXT ENTRY
JRST IPCC.3 ;TRY NEXT ONE
SUBTTL GOPHMS Process messages from [SYSTEM]GOPHER
;CALL -
; MI/ INCOMING MESSAGE FROM THE GOPHER
; S2/ MDB ADRS
;RETURNS -
; TRUE/ MESSAGE PROCESSED
; FALSE/ MORE PROCESSING REQUIRED
; IF G$ERR IS 0, JUST KEEP PROCESSING (QUEUE MESSGE
; TURNED INTO WTO)
; IF G$ERR IS NOT 0, THE MESSAGE WAS BAD
TOPS10<
GOPHMS:
LOAD S1,.MSTYP(MI),MS.TYP ;GET THE MESSAGE TYPE
CAXE S1,.IPCQU ;IS IT A QUEUE. UUO ARGUMENT MESSAGE?
PJRST E$IFC## ;NO, COMPLAIN
$SAVE <P1,P2>
; MOVE S2,S2 ;AIM AT THE MDB
$CALL MSGCHK ;MAKE SURE THE MESSAGE LOOKS REASONABLE
$RETIF ;IT DOESN'T, QUIT
MOVEI S1,.OHDRS(MI) ;AIM AT THE START OF THE BLOCKS
$CALL P$SETU## ;START THE BLOCK GETTER
SKIPG P1,.OARGC(MI) ;GET THE ARGUMENT BLOCK COUNT
PJRST E$ICS## ;NO GOOD, QUIT
GOPH.1: $CALL P$NARG## ;GET THE NEXT ARGUMENT BLOCK ADRS
MOVSI P2,-GOPHLN ;# OF ENTRIES TO CHECK
LOAD S1,ARG.HD(S2),AR.TYP ;GET THIS BLOCK TYPE
GOPH.2: HLRZ TF,GOPHMP(P2) ;GET THIS CODE
CAIE TF,0(S1) ;IS THIS THE RIGHT BLOCK TYPE?
AOBJN P2,GOPH.2 ;NO, TRY THE NEXT TYPE
JUMPGE P2,E$IFC## ;NO MATCH, GIVE UP
HRRZ TF,GOPHMP(P2) ;GET OUR BLOCK TYPE
STORE TF,ARG.HD(S2),AR.TYP ;CONVERT TO OUR TYPE
CAIE S1,.QBFNC ;IS THIS THE FUNCTION BLOCK?
JRST GOPH.3 ;NO, SKIP THE CHECK
LOAD TF,ARG.DA(S2) ;GET THE DESIRED FUNCTION
MOVX S1,.OMWTO ;TRY FOR MATCH ON WTO
CAIN TF,.QUWTO ;IS THAT WHAT THIS BLOCK SAYS?
STORE S1,.MSTYP(MI),MS.TYP ;YES, CONVERT THE MESSAGE
MOVX S1,.OMWTR ;TRY FOR MATCH ON WTOR
CAIN TF,.QUWTR ;IS THAT WHAT THIS BLOCK SAYS?
STORE S1,.MSTYP(MI),MS.TYP ;YES, CONVERT THE MESSAGE
GOPH.3: $CALL P$NEXT## ;STEP TO THE NEXT BLOCK
SOJG P1,GOPH.1 ;CONVERT EACH BLOCK
$RETF ;INDICATE MORE PROCESSING REQUIRED
;LEAVE WITH G$ERR = 0
;Conversion table for mapping UUOSYM user argument block types
; Into 'old' style WTO blocks
GOPHMP: XWD .QBFNC,.WTNOP ;FUNCTION BLOCK -- NOOP
XWD .QBACT,.WTNOP ;ACCOUNT BLOCK -- NOOP
XWD .QBNOD,.WTDES ;NODE BLOCK -- DESTINATION NODE
XWD .QBTYP,.WTTYP ;TYPE BLOCK -- MAP IT!
XWD .QBMSG,.WTTXT ;MESSAGE BLOCK -- MAKE IT A TEXT BLOCK
XWD .QBNAM,.WTNOP ;USER NAME BLOCK -- THROW IT AWAY
GOPHLN==.-GOPHMP ;NUMBER OF ENTRIES
>;END TOPS10
SUBTTL ORNINT Initialization routines
;THIS ROUTINE WILL GET THE REQUIRED MONITOR INFORMATION NEEDED
;BY ORION FOR PROCESSING.
ORNINT: $CALL I%HOST ;GET HOST NAME/NUMBER
MOVEM S1,G$HOST ;SAVE THE HOST NAME IN SIXBIT.
MOVEM S2,G$HSTN ;SAVE THE HOST NUMBER
$CALL C%MAXP ;GET MAXIMUM PACKET SIZE
MOVEM S1,G$MAXP ;SAVE MAXIMUM PACKET SIZE
TOPS10<
;FIND THE OPERATOR PPN
MOVX S1,%LDFFA ;GETTABB THE FAILSAFE PPN
GETTAB S1, ;...
$STOP(CFO,Cannot GETTAB operator PPN)
MOVEM S1,OPRPPN ;SAVE FOR LATER
MOVX S1,%CNFLN ;Gettab the FRCLIN line number
GETTAB S1, ;...
$STOP (CGF,Cannot GETTAB FRCLIN line number)
ADDI S1,.UXTRM ;Make it a UDX
MOVEM S1,FRCLIN ;Store it
>;END TOPS10
MOVE S1,G$HOST ;NODE OF CENTRAL SITE
$CALL CHKNOD ;CHECK THE NODE
JUMPT ORNI.1 ;ADD THE NODE
MOVE S1,G$HOST ;GET THE CENTRAL SITE
SETZ S2, ;ZERO THE NODE NUMBER
ORNI.1: $CALL ADDNOD ;SETUP THE NODE
MOVX T1,ND.SYS ;MARK AS SYSTEM OPERATOR
IORM T1,NOD.FL(S1) ;S1 ADDRESS OF NODE LIST ENTRY
SETOM S1 ;SET FOR MY JOB
MOVX S2,JI.JNO ;GET MY JOB NUMBER
$CALL I%JINF ;GET THE JOB INFO
MOVEM S2,G$MJOB ;SAVE MY JOB NUMBER
TOPS20<
SKIPN DEBUGW ;ARE WE DEBUGGING?
$CALL N$INIT## ;NO..SETUP THE NSP SRV IF CAN
SKIPE S1,G$MJOB ;ARE WE RUNNING UNDER JOB 0
$RETT ;NO..JUST RETURN
SETZB T3,T4 ;CLEAR T3 AND T4
MOVE T1,[POINT 6,G$HOST] ;GET THE LOCATION
MOVE T2,[POINT 7,T3] ;PLACE TO STORE STRING
MOVEI P1,6 ;MAXIMUM LENGTH
ORNI.2: ILDB S2,T1 ;GET A BYTE
JUMPE S2,ORNI.3 ;O.K. SET THE LOCATION
ADDI S2,40 ;CONVERT TO ASCII CHARACTER
IDPB S2,T2 ;SAVE THE BYTE
SOJG P1,ORNI.2 ;CHECK NUMBER OF CHARACTERS
ORNI.3: MOVX S2,.SJLLO ;SETUP LOCATION
HRROI T1,T3 ;GET STRING
SETJB ;SET IT UP
ERJMP .+1 ;IGNORE ERROR FOR NOW
>;END TOPS20
$RET ;RETURN
SUBTTL MSGCHK Message length and header validation
;THIS ROUTINE WILL CHECK OUT THE LENGTH AND HEADER INFO FOR
;THE MESSAGE AND ALL ARGUMNET BLOCKS SPECIFIED
;CALL -
; S2/ MDB ADRS
; MI/ ADRS OF INCOMING MESSAGE
MSGCHK: $SAVE <P1>
MOVE P1,S2 ;COPY THE MDB ADRS OVER
LOAD S2,MDB.MS(P1),MD.CNT ;GET THE SIZE OF THE MESSAGE
MOVE T1,MI ;SAVE START ADDRESS IN T1
ADDI T1,(S2) ;COMPUTE ENDING ADDRESS OF MESSAGE
LOAD T2,.MSTYP(MI),MS.CNT ;GET THE COUNT FROM MESSAGE
ADDI T2,(MI) ;COMPUTE LENGTH OF MESSAGE
CAMLE T2,T1 ;WITHIN ACTUAL LIMITS
PJRST E$MTS ;MESSAGE TO SHORT
MOVEI S1,.OHDRS(MI) ;GET ADDRESS OF FIRST ARGUMENT
CAMLE S1,T1 ;LENGTH WITHIN BOUNDS
PJRST E$MTS ;MESSAGE TO SHORT
SKIPN T2,.OARGC(MI) ;ANY ARGUMENTS IN MESSAGE
JRST MSGC.3 ;YES..CHECK THEM OUT
MSGC.1: SKIPG T2 ;VALID COUNT FIELD
PJRST E$ICS ;INVALID COUNT SPECIFIED
SKIPA ;SKIP OVER INCREMENT FIRST TIME
MSGC.2: ADDI S1,1 ;POINT TO NEXT HEADER
MOVEI T3,ARG.HD(S1) ;ADDRESS OF ARGUMENT HEADER
CAMLE T3,T1 ;ADDRESS IN MESSAGE
PJRST E$BML ;BAD MESSAGE LENGTH SPECIFIED
LOAD S2,ARG.HD(S1),AR.LEN ;GET THE LENGTH
SKIPG S2 ;MAKE SURE POSITIVE
PJRST E$IAL ;INVALID ARGUMENT LENGTH
ADDI S1,-1(S2) ;COMPUTE ADDRESS OF NEXT ARGUMENT
CAMLE S1,T1 ;STILL WITHIN BOUNDS
JRST E$BML ;BAD MESSAGE LENGTH
SOJG T2,MSGC.2 ;PROCESS ALL ARGUMENTS
MSGC.3: SUBI S1,1 ;DECREMENT BY 1
CAMLE S1,T1 ;SHOULD BE EXACT OR LESS
JRST E$BML ;BAD MESSAGE LENGTH
$RETT ;RETURN TRUE
SUBTTL RETMSG Returned DN60 message display
;This routine will resend the Display message that was sent to
;Quasar to the Central Site Operator
RETMES: $CALL SPGOUT ;SETUP PAGE FOR OUTPUT
MOVE S1,G$HOST ;GET CENTRAL SITE NODE ENTRY
$CALL FNDNOD ;FIND THE NODE
JUMPT SNDAOP ;SEND TO ALL OPERATOR AND RETURN
JRST S..CNE ;NO CENTRAL SITE NODE
SUBTTL OPRHEL Hello message from OPR
;THIS MESSAGE IS SENT BY OPR TO SIGNON TO ORION
;IF SUCCESSFUL ORION WILL CREATE THE APPROPRIATE NODE AND
;OPR ENTRIES AND SEND A SETUP TO THE OPR OF THE CURRENT
;RUNTIME VALUES.
OPRHEL: SKIPG T2,.OARGC(MI) ;VALID ARGUMENT COUNT
PJRST E$ICS ;INVALID COUNT SPECIFIED
LOAD T1,.OHDRS+ARG.HD(MI),AR.TYP ;GET THE TYPE
CAIE T1,.OPHEL ;HELLO BLOCK?
PJRST E$ITM ;INVALID TYPE IN MESSAGE
SOJG T2,E$ICS ;INVALID ARGUMENT COUNT
LOAD S1,.OHDRS+OPH.OV(MI) ;GET ORNMAC VERSION NUMBER
; CAIE S1,%%.OPR ;SAVE VERSION
; PJRST E$WVN ;WRONG VERSION NUMBER ERROR..
$CALL GETPRV ;AND GET THIS OPR'S PRIVILEGES
JUMPF E$IPE ;NONE!, GIVE 'EM THE GONG!
MOVE P3,S1 ;SAVE THE PRIVS
TOPS10<
CAXE P3,OP.HST ;HOST OPR?
CAXN P3,OP.SYS ;SYSTEM OPR?
SKIPA S1,G$HOST ;YES, THEY LIVE AT CENTRAL!
>;END TOPS10
$CALL GETNOD ;FIND OUT WHERE THIS OPR LIVES
JUMPF E$CLO ;Can't? Can't locate operator
MOVEM S1,G$ARG1 ;Save node name for any errors ahead
TXNE P3,OP.REM ;Are we remote and
CAME S1,G$HOST ; connected to the host?
SKIPA ;No
PJRST E$IPE ;Yes, bad combination...
$CALL CHKNOD ;MAKE SURE IT'S FOR REAL!
JUMPF E$ION ;IT'S A PHONY!
DMOVE P1,S1 ;SAVE NAME AND NUMBER
DMOVE S1,P1 ;RESTORE NODE VALUES
MOVE T1,P3 ;AND GET BACK OPR CAPABILITY BITS
$CALL ADDOPR ;ADD OPR TO DATA BASE
JUMPF E$OPD ;OPR PID ALREADY DEFINED
PJRST SNDSET ;SEND SETUP AND RETURN
SUBTTL APLHEL Hello message from application (NCP)
;THIS MESSAGE IS SENT BY AN APPLICATION TO SIGNON TO ORION
;THIS ROUTINE WILL CHECK OUT THE NAME AND IF VALID ASSIGN AN
;IDENTIFIER TO THE APPLICATION AND RETURN THE VALUE TO THE
;APPLICATION.
APLHEL: $CALL CHKWHL ;PRIVILEGE CHECK
JUMPF E$IPE ;INSUFFICIENT PRIVILEGES ENABLED
SKIPG T2,.OARGC(MI) ;ARGUMENT COUNT GREATER THAN 0
PJRST E$ICS ;INVALID COUNT SPECIFIED
CAIE T2,1 ;BETTER BE JUST ONE ARGUMENT
PJRST E$ICS ;INVALID COUNT SPECIFIED
LOAD T1,.OHDRS+ARG.HD(MI),AR.TYP ;GET THE ARGUMENT TYPE
CAIE T1,.AHNAM ;APPLICATION HELLO NAME
PJRST E$ITM ;INVALID TYPE IN MESSAGE
LOAD T1,.OHDRS+ARG.HD(MI),AR.LEN ;GET LENGTH OF BLOCK
CAIGE T1,1 ;BETTER BE GREATER THAN 1
PJRST E$IAL ;INVALID ARGUMENT LENGTH SPECIFIED
HRROI S2,.OHDRS+ARG.DA(MI) ;ADDRESS OF TEST STRING
MOVEI S1,APLTAB ;TABLE HEADER
$CALL S%TBLK ;LOOKUP ENTRY IN TABLE
TXNN S2,TL%EXM ;EXACT MATCH ON STRING
JRST E$ANI ;INVALID APPLICATION NAME
MOVEI S2,APLTAB+1 ;ADDRESS OF FIRST ENTRY
HLRZM S2,G$ARG1 ;SAVE NAME FOR MESSAGES
SUB S1,S2 ;GET TABLE OFFSET
MOVE T1,S1 ;SAVE THE OFFSET
MOVE S2,G$SND ;GET SENDERS PID
MOVEM S2,APLPID(T1) ;SAVE PID IN TABLE
$CALL GETPAG ;GET MESSAGE OUT PAGE..MO SET ON RETURN
MOVX S1,.OMHAC ;HELLO ACKNOWLEDGMENT
STORE S1,.MSTYP(MO),MS.TYP ;SAVE THE TYPE
MOVE S1,.MSCOD(MI) ;[321] GET USERS ACK CODE
MOVEM S1,.MSCOD(MO) ;[321] RETURN IT TO HIM...
AOS .OARGC(MO) ;BUMP ARGUMENT COUNT
MOVX S1,.AHTYP ;APPLICATION HELLO TYPE CODE
STORE S1,.OHDRS+ARG.HD(MO),AR.TYP ;SAVE TYPE IN HEADER
MOVX S1,ARG.SZ ;MINIMUM SIZE OF BLOCK
STORE S1,.OHDRS+ARG.HD(MO),AR.LEN ;SAVE LENGTH OF BLOCK
MOVE S1,APLCOD(T1) ;GET APPLICATION CODE
STORE S1,.OHDRS+ARG.DA(MO) ;SAVE DATA IN BLOCK
MOVEI S1,.OHDRS+ARG.SZ ;SIZE OF THE MESSAGE
STORE S1,.MSTYP(MO),MS.CNT ;SAVE COUNT IN MESSAGE
MOVE P3,T1 ;SAVE TABLE OFFSET
MOVE S1,G$SND ;GET SENDERS PID
MOVEI S2,PAGSIZ ;SEND THE PAGE
$CALL SNDPID ;SEND THE MESSAGE
$RETIT ;RETURN
SETZM APLPID(P3) ;CLEAR TABLE ENTRY
$CALL RELPAG ;RETURN THE PAGE
PJRST E$AHF ;APPLICATION HELLO FAILURE
DEFINE X(A,B,C),<ORNDSP(,<A>,<B>)>
APLTAB: $STAB
TABAPL ;EXPAND APPLICATION TABLES
$ETAB
APLPID: BLOCK NUMAPL ;PID TABLE OF APPLICATIONS
DEFINE X(A,B,C),<EXP .KY'B>
APLCOD: TABAPL ;EXPAND THE APPLICATION SYMBOLS
; Generate requests for the application tables
;
DEFINE X (A,B,C),<
EXTERN C
.REQUIR C
>
TABAPL
SUBTTL CHKNOD Validate the OPR node data
;THIS ROUTINE WILL VALIDATE THE OPR NODE IN MESSAGE WITH
;THE NODE THE OPR SIGNED ON WITH TO INSURE NODE IS VALID
;ON RETURN TRUE:
; S1/ NODE NAME IN SIXBIT
; S2/ NODE NUMBER (IF APPLICABLE)
TOPS10<
CHKNOD: MOVE T1,[XWD .NDRNN,T2] ;CONVERT THE NODE NAME/NUM IN T2
HRRZI T2,2 ;2 ARGS SPECIFIED..LENGTH
MOVE T3,S1 ;NODE NUMBER TO CONVERT,,RIGHT HALF
NODE. T1, ;ISSUE NODE UUO
JRST [CAME T1,[XWD .NDRNN,T2] ;LOST BECAUSE NO NETWORKS?
$RETF ;NO, A REAL ERROR
PJRST I%HOST] ;YES, JUST RETURN HOST NAME
TLNN T1,770000 ;SIXBIT ANSWER..NODE NAME
JRST CHKN.1 ;SET UP NODE NUMBER
MOVE S2,S1 ;PUT NUMBER IN S2
MOVE S1,T1 ;PUT NAME IN S1
$RETT ;RETURN TRUE
CHKN.1: MOVE S2,T1 ;PUT NUMBER IN S2
$RETT ;RETURN S1,,NODE NAME
>;END TOPS10
TOPS20<
CHKNOD: MOVE T3,S1 ;HOLD THE NODE NAME
CAMN S1,G$HOST ;IS IT CENTRAL SITE?
JRST CHKN.1 ;YES..RETURN
MOVX S1,.NDVFY ;NODE VERIFY FUNCTION
MOVEI S2,T1 ;ADDRESS OF THE BLOCK
HRROI T1,G$NODX ;GET THE NODE
SETZM T2 ;CLEAR THE FLAGS
NODE ;DO THE NODE JSYS
ERJMP .RETF ;ERROR..RETURN FALSE
TXNN T2,ND%EXM ;DID IT MATCH
$RETF ;RETURN FALSE
CHKN.1: MOVE S1,T3 ;GET NODE NAME BACK IN SIXBIT
SETZ S2, ;CLEAR AC 2
$RETT ;RETURN TRUE
>;END TOPS20
SUBTTL GETNOD Extract located node of message sender
;This routine will find out where the sender is located.
;On the -20, this information comes as part of the IPCF descriptor.
;On the -10, the location of the job's terminal is returned
;Call
; G$JOB/ Job number of the sender
; MI/ incoming message address
;Returns
; True S1/ Sixbit node name
; False Can't find the node name
TOPS20<
GETNOD: SKIPN S1,.OHDRS+OPH.ND(MI) ;GET THE NODE NODE FROM THE MESSAGE ITSELF
MOVE S1,G$HOST ;NONE GIVEN , ASSUME CENTRAL
MOVEM S1,G$NODE ;SAVE FOR THIS MESSAGE
$RETT
>;END TOPS20
TOPS10<
GETNOD: $SAVE <P1>
LOAD S1,G$JOB ;GET THE JOB NUMBER
LOAD P1,G$JOB ;Get it again
GETN.1: CTLJOB P1, ;Try for a controlling job
$RETF ;Job number must be illg.
CAMN P1,[-1] ;Are we done?
JRST GETN.2 ;Yes
MOVE S1,P1 ;There is one
JRST GETN.1 ;Go try for another
GETN.2: TRMNO. S1, ;GET THIS JOB'S TERMINAL #
$RETF ;CAN'T?? GIVE UP
GTNTN. S1, ;FIND OUT WHERE THAT TTY LIVES
$RETF ;ITS DEAD, QUIT
HLRZS S1 ;GET JUST THE TERM #
MOVE P1,S1 ;SAVE FOR RETURN
MOVEI TF,2 ;1 ARGUMENT, 2 WORDS IN LIST
MOVE S2,[XWD .NDRNN,TF] ;AIM AT THE ARGUMENT BLOCK
NODE. S2, ;CONVERT TO SIXBIT NAME
JRST [CAME S2,[XWD .NDRNN,TF] ;LOST BECAUSE FTNET OFF?
$RETF ;NO, A REAL GARBAGE NODE!
PJRST I%HOST] ;YES, JUST SAY OPR AT HOST NODE
MOVE S1,S2 ;MOVE IT INTO PLACE
MOVE S2,P1 ;AND PUT BACK THE NODE NUMBER
$RETT
>;END TOPS10
SUBTTL OPRSET Process setup reply from OPR
;THIS ROUTINE WILL PROCESS A SETUP REPLY FROM OPR AND
;ENABLE OPR FOR APPROPRIATE MESSAGES
OPRSET: SKIPG .OARGC(MI) ;VALID ARGUMENT COUNT
PJRST E$ICS ;INVALID COUNT SPECIFIED
MOVE S1,G$SND ;GET SENDERS PID
$CALL VALOPR ;VALIDATE THE NODE
;RETURNS TRUE S2 OPR ENTRY ADDRESS
JUMPF E$ISM ;INVALID SETUP MESSAGE
MOVEM S2,G$OPRA ;SAVE THE OPR ADDRESS
LOAD T1,.OHDRS+ARG.HD(MI),AR.TYP ;GET TYPE CODE
CAIN T1,.ORFAL ;FAILURE RETURN
PJRST OPRS.1 ;FIX OPR DATA BASE
CAIE T1,.ORSUC ;SUCCESSFUL??
PJRST E$ITM ;INVALID TYPE IN MESSAGE
MOVX S1,OP.NST ;OPR NOT SETUP
TDNN S1,OPR.FL(S2) ;WAS OPR ALREADY SETUP
PJRST OPRS.3 ;YES..ERROR
ANDCAM S1,OPR.FL(S2) ;MARK AS SETUP
SKIPG G$NSNT ;ANY UNSENT MESSAGES
$RETT ;NO JUST RETURN
MOVE S1,G$OPRA ;Get OPR data base address
$CALL O$HOST ;System or host?
JUMPF .RETT ;No.. don't send outstanding msgs
MOVX S1,R.SOPR ;ONLY SENDS TO OPR
$CALL SNDLST ;TRY SENDING THE MESSAGES
$RETT ;RETURN TRUE
OPRS.1: SOSG .OARGC(M) ;ANY ARGUMNETS LEFT
JRST OPRS.2 ;NO..IGNORE TEXT LOGGING
LOAD T1,.OHDRS+ARG.HD(MI),AR.LEN ;GET THE LENGTH
ADDI T1,.OHDRS(M) ;POSITION TO NEXT ARGUMENT
LOAD S1,ARG.HD(T1),AR.TYP ;GET ARGUMENT TYPE
CAIE S1,.CMTXT ;TEXT ??
JRST OPRS.2 ;NO..IGNORE TEXT
MOVEI S1,ARG.DA(T1) ;ADDRESS OF THE TEXT
$CALL L$SETF## ;LOG SETUP FAILURE
OPRS.2: MOVE S1,G$SND ;GET THE SENDERS PID
$CALL DELOPR ;DELETE THE OPR BLOCK
$RETT ;RETURN TRUE
OPRS.3: MOVE S1,G$SND ;GET THE SENDERS PID
$CALL DELOPR ;DELETE THE OPR
PJRST E$OAS ;OPR ALREADY SETUP..OPR DELETED
SUBTTL SNDSET Send setup reply to OPR
;THIS ROUTINE SEND THE CURRENT SETTINGS TO OPR IN RESPONSE TO
;THE HELLO MESSAGE
SNDSET: $CALL GETPAG ;PAGE FOR OUTPUT IN MO
MOVX S1,.OMOST ;OPR SETUP CODE
STORE S1,.MSTYP(MO),MS.TYP ;SAVE IN MESSAGE
MOVX S1,.OHDRS ;SIZE OF MESSAGE FOR NOW
STORE S1,.MSTYP(MO),MS.CNT ;SAVE THE COUNT IN MESSAGE
MOVE S1,G$SND ;GET OPR PID
MOVEM S1,G$ARG1 ;SAVE THE PID
MOVX S2,PAGSIZ ;SEND A PAGE
$CALL SPDOPR ;SEND THE MESSAGE
$RETIT ;OK..RETURN
PJRST E$OSF ;OPR SETUP FAILURE
$RETF ;RETURN FALSE FROM SEND
SUBTTL TEXT Routine to Process a TEXT Message
;THIS ROUTINE JUST SHIPS THE MESSAGE ON TO THE APPROPRIATE OPERATOR
;IF MF.NOM IS SET, THE MESSAGE IS THROWN AWAY
TEXT: LOAD S1,.MSCOD(MI) ;GET THE CODE TO LOOK FOR
$CALL VALOPR ;FIND THE OPR ENTRY
JUMPF E$ODE ;OPR NO LONGER EXISTS
LOAD S1,.MSFLG(MI) ;GET FLAG WORD
TXNE S1,MF.NOM ;NO MESSAGE..IN ACK
$RETT ;YES..JUST RETURN
$CALL SPGOUT ;SETUP OUTPUT PAGE
AOS OPR.OC(S2) ;BUMP MESSAGE OUT COUNT
MOVE S1,OPR.PD(S2) ;GET THE PID TO SEND TO
MOVEI S2,PAGSIZ ;GET SIZE OF MESSAGE
$CALL SPDOPR ;SEND PID TO OPR
$RETT ;RETURN TRUE ALWAYS
SUBTTL SPGOUT Setup output page to send
;This Routine will make an Output Page to Send where
;we wish to send the input message out
SPGOUT: $CALL GETPAG ;GET A PAGE
HRLI S1,(MI) ;SOURCE ADDRESS
HRRI S1,(MO) ;DESTINATION
BLT S1,PAGSIZ-1(MO) ;MOVE THE DATA
$RETT ;RETURN
SUBTTL W$WTOR Process a WTOR Message
W$WTOR: MOVE P1,.OFLAG(MI) ;GET FLAG WORD
TXNE P1,WT.KIL ;CHECK FOR KILL MESSAGE
PJRST W$KWTO ;PROCESS KILL MESSAGE
$CALL W$VALID ;VALIDATE A WTO MESSAGE
$RETIF ;FAILS...RETURN
$CALL W$CHEK ;CHECK IF USER ALLOWED TO SEND
$RETIF ;ERROR..RETURN
$CALL OPRMES ;SETUP THE MESSAGE
MOVX S1,.OMWTR ;GET THE DISPLAY TYPE
STORE S1,.MSTYP(MO),MS.TYP ;SAVE TYPE IN MESSAGE
AOS G$SEQ ;ASSIGN A SEQUENCE NUMBER
MOVEI T1,[ITEXT(< ^7/[74]/^D/G$SEQ/^7/[76]/ >)]
$CALL W$MESS ;BUILD OUTPUT MESSAGE
JUMPT WTOR.1 ;O.K. CONTINUE ON
SOS G$SEQ ;DECREMENT MESSAGE COUNT FROM FAILURE
PJRST WTERRO ;WT ERROR RETURN
WTOR.1: $CALL L$WTOR## ;LOG THE WTOR MESSAGE
$CALL W$NODE ;GET THE NODE TO SEND TO
MOVE T1,S1 ;SAVE THE ENTRY ADDRESS
LOAD S1,NOD.ML(T1) ;GET MESSAGE LIST NUMBER
$CALL L%LAST ;POSITION TO THE END
LOAD S1,NOD.ML(T1) ;GET MESSAGE LIST NUMBER
LOAD S2,ARG.HD+.OHDRS(MO),AR.LEN ;GET LENGTH OF ARGUMENT
MOVE T3,S2 ;SAVE SIZE IN T3
ADDI S2,MSL.SZ ;GET SIZE OF TOTAL ENTRY
$CALL L%CENT ;CREATE AN ENTRY
JUMPF WTERRO ;Shouldn't happen, but quit this.
MOVE T2,S2 ;SAVE ADDRESS OF THE ENTRY
HRLI S1,ARG.HD+.OHDRS(MO) ;GET START OF BLT
HRRI S1,MSL.SZ(T2) ;ADDRESS OF DESTINATION
ADDI T3,MSL.SZ(T2) ;GET ENDING ADDRESS
BLT S1,-1(T3) ;MOVE THE DATA
MOVE S1,G$SND ;SENDERS PID
MOVEM S1,MSL.PD(T2) ;SAVE IN MESSAGE BLOCK
MOVEM T1,MSL.ND(T2) ;SAVE NODE ADDRESS IN MESSAGE LIST
AOS NOD.CT(T1) ;BUMP THE NODE COUNT
MOVE S1,.MSCOD(MI) ;GET MESSAGE HEADER CODE
MOVEM S1,MSL.CD(T2) ;SAVE THE MESSAGE CODE
MOVE S1,G$SEQ ;GET THE SEQUENCE NUMBER
MOVEM S1,MSL.ID(T2) ;SAVE SEQUENCE NUMBER
SKIPN S1,WDAJOB ;WAS THERE A JOB NUMBER
LOAD S1,G$JOB ;GET SENDERS JOB NUMBER
MOVEM S1,MSL.JB(T2) ;SAVE JOB NUMBER
MOVX T3,MS.TER ;TERMINAL NOTIFY ON FAILURE
MOVX S2,WT.NFY ;GET THE NOFITFY TERMINAL FLAG
TDNN S2,.OFLAG(MI) ;WAS IT SET?
JRST WTOR.2 ;NO..BYPASS SETTING LOGGED IN TIME
IORM T3,MSL.FL(T2) ;SAVE THE FLAG BIT WITH MESSAGE
MOVX S2,JI.JLT ;GET LOGGED IN TIME FOR JOB
$CALL I%JINF ;GET LOGGED IN TIME
MOVEM S2,MSL.JT(T2) ;SAVE THE VALUE FOR LATER
WTOR.2: SKIPN G$CHKM ;NEED TO REQUEST MESSAGE CHECK?
$CALL REQMSC ;YES..GO DO IT
MOVE S1,T1 ;NODE ENTRY
$CALL SNDAOP ;Send to all operators
$RET ;Return preserving AC0
SUBTTL W$KWTO Kill a WTOR request by code
;THIS ROUTINE WILL KILL A WTOR REQUEST BY CODE AND INFORM
;ALL OPRS OF THE DELETED MESSAGE
W$KWTO: MOVEI S2,[ITEXT(< by user ^U/G$SID/ job ^D/G$JOB/>)]
MOVEM S2,G$ARG3 ;SAVE USER INFO FOR KILL
TXNN P1,WT.SJI ;DID USER WISH TO SUPPRESS JOB INFO
JRST WTOK.0 ;NO..LOOK FOR MESSAGE NOW
$CALL CHKWHL ;CHECK IF PRIVILEGED
JUMPF E$IPE ;INSUFFICIENT PRIVILEGES
MOVEI S2,NULTXT ;SETUP NULL TEXT
MOVEM S2,G$ARG3 ;SAVE THE ARGUMENT
WTOK.0: MOVX S1,MSL.CD ;GET THE CODE FIELD
MOVE P3,.MSCOD(MI) ;GET THE ACK CODE TO CHECK FOR
TXNE P1,WT.KAL ;KILL ALL FOR THE JOB
JRST [MOVX S1,MSL.JB ;SETUP JOB NUMBER FOR THE MATCH
LOAD P3,G$JOB ;GET THE JOB NUMBER
JRST .+1] ;CONTINUE ON
HRRM S1,FNDXCT ;SAVE FOR COMPARE
MOVE S1,P3 ;GET THE MESSAGE CODE
MOVEM S1,G$ARG1 ;SAVE CODE FOR POSSIBLE ERROR
SETZM G$ARG2 ;CLEAR MESSAGE KILLED COUNT
$CALL FNDMSG ;TRY TO FIND A MESSAGE
JUMPF E$NMC ;NO MESSAGES WITH CODE
WTOK.1: SETZ P1, ;CLEAR P1 FOR SCRATCH
EXCH P1,G$ERR ;SAVE ERROR CODE
MOVEI S1,E$CWM ;SETUP USER CANCEL MESSAGE
$CALL W$KMES ;KILL THE MESSAGE
$CALL L$KMES## ;LOG THE MESSAGE
MOVEM P1,G$ERR ;RESTORE THE ERROR CODE
WTOK.2: MOVE S1,P3 ;GET THE CODE AGAIN
$CALL NXTMSG ;GET NEXT MESSAGE
JUMPT WTOK.1 ;PROCESS SECOND MESSAGE
SETZM G$ERR ;CLEAR ERROR CODE
SKIPE G$ARG2 ;ANY MESSAGES KILLED
JRST WTOK.3 ;CHECK FOR ACK
MOVE S1,P3 ;GET THE CODE
MOVEM S1,G$ARG1 ;SAVE THE CODE
PJRST E$NMC ;NO MESSAGE CANCELED
WTOK.3: LOAD S1,.MSFLG(MI),MF.ACK ;ACK REQUESTED?
SKIPN S1 ;USER WANT AN ACK
$RETT ;NO..JUST RETURN
PJRST E$MCJ ;MESSAGES CANCELED FOR JOB
SUBTTL W$NODE Determine destination node for message
W$NODE: SKIPN S1,WDADES ;ANY DESTINATION SET
JRST WTNO.1 ;NO..USE CENTRAL SITE
$CALL FNDNOD ;CHECK THIS NODE
$RETIT ;O.K...FOUND IT
WTNO.1: MOVE S1,G$HOST ;GET CENTRAL SITE NODE
$CALL FNDNOD ;LOCATE THIS ONE
$RETIT ;BETTER SUCCEED
$STOP(CNE,Central site node not present)
SUBTTL W$KMES Kill a message and notify OPR
W$KMES: $CALL (S1) ;SETUP MESSAGE
MOVE S1,MSL.ID(S2) ;GET SEQUENCE NUMBER
MOVEM S1,G$ARG1 ;SAVE THE NUMBER
MOVE S1,MSL.ND(S2) ;GET NODE MESSAGE FOUND AT
PUSH P,S1 ;SAVE NODE LIST ADDRESS
SOS NOD.CT(S1) ;DECREMENT MESSAGE NODE COUNT
MOVE S1,NOD.ML(S1) ;GET MESSAGE LIST NUMBER
$CALL L%DENT ;DELETE THE MESSAGE
$CALL BLDACK ;BUILD ACK MESSAGE
POP P,S1 ;GET NODE ADDRESS
$CALL SNDAOP ;SEND IT TO ALL OPRS AT NODE
AOS G$ARG2 ;BUMP KILLED COUNT
$RETT ;RETURN TRUE
SUBTTL W$WTO Process a WTO message
;THIS ROUTINE WILL PROCESS A WTO MESSAGE AND SEND IT TO
;THE APPROPRIATE OPERATOR
W$WTO: $CALL W$CHEK ;CHECK IF USER ALLOWED TO SEND
$RETIF ;ERROR..RETURN
$CALL W$VALID ;VALIDATE THE MESSAGE
$RETIF ;ERROR..RETURN
$CALL OPRMES ;BUILD OUTPUT MESSAGE
$CALL W$MESS ;SETUP OUTPUT TEXT
JUMPF WTERRO ;WT ERROR RETURN
$CALL L$WTO## ;LOG WTO MESSAGE
WTOSND: $CALL W$NODE ;GET THE NODE FOR MESSAGE
$CALL SNDAOP ;Send the message
$RET ;Return preserving AC0
WTERRO: $CALL RELPAG ;RETURN THE PAGE
$RETF ;RETURN FALSE
SUBTTL W$CHEK Check if WTO/WTOR allowed for this job
W$CHEK: SKIPE S1,WDAJOB ;WTO/WTOR IN SOMEONE'S BEHALF ?
JRST CHEK.1 ;YES
$CALL CHKWHL ;CHECK IF PRIVILEGED
$RETIT ;O.K.. IGNORE THE CHECK
LOAD S1,G$JOB ;GET THE JOB NUMBER
CHEK.1: MOVX S2,JI.BAT ;GET BATCH DATA AND OPR FIELDS
$CALL I%JINF ;GET THE DATA
LOAD S1,S2,OB.WTO ;GET THE WTO FLAGS
SKIPN S1 ;ANY VALUE SET
$RETT ;NO..ITS O.K...RETURN
CAIN S1,.OBNOM ;NO MESSAGES ALLOWED
JRST CHEK.2 ;NOT ALLOWED - CHECK FOR BATCH
LOAD S1,.MSTYP(MI),MS.TYP ;GET MESSAGE TYPE
CAIE S1,.OMWTR ;WAS IT A WTOR
$RETT ;NO - RETURN TRUE
CHEK.2: TXNN S2,OB.BSS ;BATCH STREAM ?
PJRST E$WNA ;NO - A TIMESHARING JOB
$CALL M%GPAG ;GET A PAGE
MOVE MO,S1 ;SAVE ADDRESS
HRLI S1,CANMSG ;SET UP BLT
BLT S1,CANSIZ-1(MO) ;COPY INTO IPCF PAGE
LOAD S1,S2,OB.BSN ;GET BATCH STREAM NUMBER
MOVEM S1,.OARGC+2+OBJ.UN(MO) ;STORE IT
MOVE S1,G$HOST ;GET NODE NUMBER
MOVEM S1,.OARGC+2+OBJ.ND(MO) ;STORE IT
SETZM G$SND ;TO MAKE ACK CODE ZERO
PUSHJ P,SNDQSR ;CANCEL THE BATCH JOB
$RETF ;ENOUGH OF THIS CRAP
; Prototype message block
; This block contains the information that would noramlly be generated by an
; "ABORT BATCH-STREAM nnn /ERROR-PROCESSING /REASON:No operator intervention
; allowed." command to OPR.
;
CANMSG: XWD CANSIZ,.OMCAN ;(.MSTYP) MESSAGE LENGTH AND TYPE
XWD 0,0 ;(.MSFLG) FLAGS
XWD 0,0 ;(.MSCOD) ACK CODE
XWD 0,0 ;(.OFLAG) FLAGS
XWD 0,3 ;(.OARGC) ARGUMENT COUNT
XWD 4,.OROBJ ;OBJECT BLOCK HEADER
XWD 0,.OTBAT ;BATCH
XWD 0,0 ;STREAM
XWD 0,0 ;NODE NUMBER
XWD 2,.CANTY ;ERROR PROCESSING BLOCK HEADER
XWD 0,.CNERR ;/ERROR-PROCESSING
XWD 7,.ORREA ;REASON BLOCK HEADER
ASCIZ |No operator intervention allowed.| ;/REASON TEXT
CANSIZ==.-CANMSG ;LENGTH OF MESSAGE
IFG <CANSIZ-24>,<PRINTX ? Cancel message size too big; change WDACAN>
SUBTTL W$LOGM Log a message
;THIS MESSAGE IS A WTO/WTOR/ACK TYPE MESSAGE JUST PLACING INFO IN LOG
;AND NOT SENDING IT.. IF THERE IS NO LOG THE MESSAGE WILL BE IGNORED
W$LOGM: SKIPN LOGINT ;LOGGING ENABLED
$RETT ;NO..JUST RETURN..IGNORE IT
$CALL W$VALID ;VALIDATE THE MESSAGE
$RETIF ;ERROR..RETURN
$CALL OPRMES ;BUILD OUTPUT MESSAGE
$CALL W$MESS ;SETUP OUTPUT TEXT
JUMPF WTERRO ;WT ERROR RETURN
$CALL L$LOG## ;LOG WTO MESSAGE
PJRST RELPAG ;RELEASE PAGE AND RETURN
SUBTTL W$VALID Validate WTO, WTOR and ACK Messages
;THIS ROUTINE WILL TAKE THE FREE FORMATTED WTO, WTOR
;AND ACK MESSAGES AND MAP THEM INTO THE FIXED FORMATED MESSAGE
;CURRENTLY USED BY OPR AND ORION. THE ROUTINE WILL VALIDATE
;THE FIELDS AND PRIVILEGE CHECK APPROPRIATE FIELDS. ERRORS WILL
;BE GENERATED FOR ALL DUPLICATION OF ENTRIES IN THE MESSAGE.
W$VALID:LOAD S1,.MSTYP(MI),MS.CNT ;GET THE MESSAGE LENGTH
MOVEM S1,G$ARG1 ;SAVE MESSAGE LENGTH IN ARGUMENT
CAILE S1,WTOMAX ;CHECK IF WITHIN BOUNDS
PJRST E$WTL ;WTO MESSAGE TO LARGE
SKIPG P2,.OARGC(MI) ;GET THE ARGUMENT COUNT
PJRST E$ICS ;INVALID ARGUMENT COUNT SPECIFIED
TXZ FLAG,F.WFLG ;CLEAR WTO FLAGS
MOVE S1,[WDATXT,,WDATXT+1] ;WTO TEXT DATA POINTER
SETZM WDATXT ;CLEAR FIRST WORD
BLT S1,WDAEND ;CLEAR THE DATA WORDS
MOVX S1,WO.JOB ;JOB MESSAGE FLAG
MOVX S2,WT.JOB ;JOB MESSAGE FLAG FROM MESSAGE
TDNE S2,.OFLAG(MI) ;WAS IT SET
IORM S1,WDAFLG ;SET THE FLAG
MOVX S1,WO.OAC ;OPERATOR ACTION MESSAGE
LOAD S2,.MSTYP(MI),MS.TYP ;GET MESSAGE TYPE
CAIN S2,.OMWTR ;WAS IT WTOR
IORM S1,WDAFLG ;SET THE FLAG
MOVEI S1,.OHDRS(MI) ;ADDRESS OF FIRST ARGUMENT
$CALL P$SETU ;SETUP THE PARSER POINTER
MOVX S1,WO.EVM ;CHECK IF OTER MESSAGE
SKIPN WDAFLG ;ANYTHING SET?
IORM S1,WDAFLG ;TURN ON OTHER FLAG
VALW.1: $CALL P$NARG ;GET THE NEXT ARGUMENT
MOVE P1,S2 ;SAVE ARGUMENT ADDRESS
LOAD P3,ARG.HD(S2),AR.LEN ;SAVE THE ARGUMENT LENGTH
CAILE S1,.WTLST ;VALID ARGUMENT TYPE
PJRST E$ITM ;INVALID TYPE..ERROR AND RELEASE
;PAGE
HRRZ S2,WTODSP(S1) ;GET THE PROCESSING ROUTINE
$CALL (S2) ;PROCESS THE ARGUMENT
$RETIF ;BAD RETURN..RETURN
$CALL P$NEXT ;POSITION TO THE NEXT ONE
SOJG P2,VALW.1 ;PROCESS THE REST OF THE ARGUMENTS
$RETT ;Return, no longer do length check
;DISPATCH TABLE FOR WTO WTOR AND ACK PROCESSING
WTODSP: .WTTXT,,WTOTXT ;PROCESS MAIN TEXT STRING
.WTOBJ,,WTOOBJ ;PROCESS OBJECT BLOCK
.WTDES,,WTODES ;PROCESS DESTINATION NODE
.WTJOB,,WTOJOB ;PROCESS JOB NUMBER
.WTERR,,WTOERR ;PROCESS ERROR CODE
.WTRTE,,WTORTE ;PROCESS ROUTE CODE
.WTTYP,,WTOTYP ;PROCESS TYPE TEXT
.WTANS,,WTOANS ;PROCESS ANSWER BLOCK
.WTACD,,WTOACD ;PROCESS APPLICATION CODE BLOCK
.WTOCD,,WTOOCD ;PROCESS OBJECT TYPE BLOCK
.WTNOP,,WTONOP ;PROCESS NOOP DUMMY BLOCK
SUBTTL WTOTXT, WTOTYP, WTOANS and WTOACD routines
;THESE ROUTINES WILL SETUP DATA POINTER TO FIELDS AND VALIDATE
;FIELDS FOR PRIVILEGES WHERE REQUIRED
WTOTXT: TXOE FLAG,F.WTXT ;HAVE WE PROCESSED TEXT BEFORE
PJRST E$DTM ;DUPLICATE TYPE IN MESSAGE
MOVEI S1,ARG.DA(P1) ;POINTER TO ACTUAL TEXT
MOVEM S1,WDATXT ;TEXT POINTER FIELD
$RETT ;RETURN TRUE
WTOTYP: TXOE FLAG,F.WTYP ;TYPE MESSAGE SEEN
PJRST E$DTM ;DUPLICATE TYPE IN MESSAGE
$CALL CHKWHL ;THIS BLOCK NEEDS PRIVS
SKIPT ;HE/SHE/IT HAS THEM
SKIPA S1,[ARG.DA+[XWD 7,.WTTYP
ASCIZ |Message from timesharing user|]]
MOVEI S1,ARG.DA(P1) ;POINTER TO ACTUAL TEXT
MOVEM S1,WDATYP ;TYPE DATA FIELD
$RETT ;RETURN TRUE
WTOANS: TXOE FLAG,F.WANS ;ANSWER BLOCK SPECIFIED SO FAR
PJRST E$DTM ;DUPLICATE TYPE IN MESSAGE
LOAD S1,.MSTYP(MI),MS.TYP ;GET MESSAGE TYPE
CAIE S1,.OMWTR ;WTOR MESSAGE
PJRST E$IWF ;INVALID WTO FIELD
MOVEI S1,ARG.DA(P1) ;POINTER TO ACTUAL TEXT
MOVEM S1,WDAANS ;SAVE ANSWER DATA POINTER
$RETT ;RETURN TRUE
WTOACD: TXOE FLAG,F.WACD ;CODE SPECIFIED SO FAR
PJRST E$DTM ;DUPLICATE TYPE IN MESSAGE
TXNE FLAG,F.WOBJ!F.WOCD ;WAS THERE AN OBJECT BLOCK
PJRST E$AON ;APPLICA AND OBJECT NOT ALLOWED TOGETHER
MOVE S1,ARG.DA(P1) ;GET THE CODE TYPE
MOVEM S1,G$ARG1 ;SAVE THE ARGUMENT
$CALL FNDAPL ;FIND THE APPLICATION
JUMPF E$ACI ;APPLICATION CODE INVALID
MOVEM S1,WDAOBT ;SAVE APPLICATION OBJECT TYPE
MOVE T1,APLTAB+1(S2) ;GET COMMAND TABLE ENTRY
HLRZM T1,WDAACD ;SAVE THE NAME
HLRZM T1,G$ARG1 ;SAVE NAME FOR POSSIBLE ERRORS
SKIPN S1,APLPID(S2) ;IS THERE A PID THERE
PJRST E$ANS ;APPLICATION NOT SIGNED ON
CAME S1,G$SND ;BETTER BE FOR SAME JOB
PJRST E$CPM ;CODE PID MISMATCH FOR APPLICATION
$RETT ;RETURN TRUE
SUBTTL WTOJOB,WTOERR,WTORTE and WTODES routines
WTOJOB: TXOE FLAG,F.WJOB ;JOB NUMBER SEEN SO FAR
PJRST E$DTM ;YES..DUPLICATE TYPE IN MESSAGE
$CALL CHKWHL ;PRIVILEGE CHECK JOB FIELD
JUMPF E$WJP ;WTO JOB FIELD REQUIRES PRIVILEGES
LOAD S1,ARG.DA(P1) ;GET JOB NUMBER
MOVEM S1,WDAJOB ;SAVE THE JOB NUMBER
CAIE P3,ARG.SZ ;PROPER SIZE FIELD
PJRST E$IAL ;INVALID ARGUMENT LENGTH
$RETT ;RETURN TRUE
WTOERR: TXOE FLAG,F.WERR ;ERROR CODE SEEN BEFORE
PJRST E$DTM ;DUPLICATE TYPE IN MESSAGE
LOAD S1,ARG.DA(P1) ;GET DATA FIELD
MOVEM S1,WDAERR ;SAVE ERROR CODE
CAIE P3,ARG.SZ ;PROPER SIZE FIELD
PJRST E$IAL ;INVALID ARGUMENT LENGTH
$RETT ;RETURN TRUE
WTORTE: TXOE FLAG,F.WRTE ;ROUTE CODE SEEN BEFORE
PJRST E$DTM ;DUPLICATE TYPE IN MESSAGE
LOAD S1,ARG.DA(P1) ;GET THE ROUTE CODE
MOVEM S1,WDARTE ;SAVE THE ROUTE CODE
CAIE P3,ARG.SZ ;PROPER SIZE FIELD
PJRST E$IAL ;INVALID ARGUMENT LENGTH
$RETT ;RETURN TRUE
WTODES: TXOE FLAG,F.WDES ;DESTINATION CODE SPECIFIED
PJRST E$DTM ;DUPLICATE TYPE IN MESSAGE
LOAD S1,ARG.DA(P1) ;GET DESTINATION CODE
MOVEM S1,WDADES ;SAVE DESTINATION DATA
CAIE P3,ARG.SZ ;PROPER SIZE FIELD
PJRST E$IAL ;INVALID ARGUMENT LENGTH
CAME S1,[-1] ;IS IT FOR ALL NODES
$RETT ;RETURN TRUE
$CALL CHKWHL ;IS IT A WHEEL?
$RETIT ;OK..RETURN
PJRST E$IPE ;INSUFFICIENT PRIVILEGES
SUBTTL WTOOBJ Process WTO object block
;THIS ROUTINE WILL ANALYZE AN OBJECT BLOCK AND PLACE THE
;DATA IN THE OUTPUT MESSAGE
WTOOBJ: TXOE FLAG,F.WOBJ ;OBJECT BLOCK PROCESSED
PJRST E$DTM ;DUPLICATE TYPE IN MESSAGE
$CALL CHKWHL ;PRIVILEGES REQUIRED FOR OBJECT
JUMPF E$WOP ;OBJECT BLOCK REQUIRES PRIVILEGES
TXNE FLAG,F.WACD!F.WOCD ;APPLICATION CODE SET
PJRST E$AON ;APPLIC AND OBJECT NOT ALLOWED TOGETHER
$CALL WTOC.1 ;PROCESS THE CODE
$RETIF ;PASS FALSE UP
MOVE S1,OBJ.TY+ARG.DA(P1) ;GET OBJECT TYPE
CAIN S1,.OTMNT ;WAS IT A MOUNT MESSAGE
JRST WTOO.1 ;BYPASS UNIT CHECK
LOAD T1,OBJ.UN+ARG.DA(P1),OU.LRG ;GET LOW RANGE NUMBER
SKIPGE T1 ;MUST BE .GEQ. 0
PJRST E$IOU ;ILLEGAL RANGE UNIT
LOAD T2,OBJ.UN+ARG.DA(P1),OU.HRG ;GET HIGH RANGE
;**;[344]Change 1 line at WTOOBJ:+15L JCR 2/15/85
SKIPGE T2 ;[344]Better be .GEQ. 0
PJRST E$RIW ;RANGE INVALID IN WTO OBJECT BLOCK
WTOO.1: MOVEI S1,ARG.DA(P1) ;ADDRESS OF OBJECT BLOCK
MOVEM S1,WDAOBJ ;SAVE IN OBJECT WORD
LOAD T1,OBJ.ND+ARG.DA(P1) ;GET NODE NAME FROM BLOCK
SKIPN WDADES ;DESTINATION SET
MOVEM T1,WDADES ;SAVE NODE NAME FOR DESTINATION
$RETT ;RETURN TRUE
SUBTTL WTOOCD Object block type
;THIS ROUTINE WILL SETUP THE OBJECT TYPE FOR SCREENING AND
;MAKE SURE THAT NO OBJECT OR APPLICATION WERE SPECIFIED
WTOOCD: TXOE FLAG,F.WOCD ;OBJECT TYPE PROCESSED
PJRST E$DTM ;DUPLICATE TYPE IN MESSAGE
$CALL CHKWHL ;PRIVILEGES REQUIRED FOR OBJECT
JUMPF E$WTP ;OBJECT BLOCK REQUIRES PRIVILEGES
TXNE FLAG,F.WACD!F.WOBJ ;APPLICATION CODE SET
PJRST E$AON ;APPLIC AND OBJECT NOT ALLOWED TOGETHER
WTOC.1: MOVE S1,OBJ.TY+ARG.DA(P1) ;GET OBJECT TYPE
MOVEM S1,G$ARG1 ;SAVE THE OBJECT TYPE IN CASE OF ERROR
MOVEM S1,WDAOBT ;SAVE THE OBJECT TYPE
CAILE S1,0 ;WITHIN RANGE?
CAILE S1,.OTMAX
PJRST E$IOT ;NO..INVALID OBJECT TYPE
$RETT ;RETURN
SUBTTL WTONOP Process a NOOP block
;THIS ROUTINE JUST RETURNS, ALLOWING THE INCLUSION OF THE
;NOOP BLOCK (PRESUMABLY, BUT NOT DEFINITELY) SUPPLIED BY
;THE GOPHER MESSAGE MAPPER
WTONOP: $RETT
SUBTTL W$MTXT Get the text into the message
;THIS ROUTINE WILL GET THE WTO,WTOR AND ACK TEXT INTO THE
;MESSAGE FOR OUTPUT AND LOGGING
;THIS ROUTINE IS CALLED WITH S1 CONTAINING THE LINE SIZE DESIRED
;AND ALL LINES AFTER FIRST WILL BE PRECEDED BY TWO TABS
W$MTXT: MOVE T1,WDATXT ;ADDRESS OF THE TEXT
HRLI T1,(POINT 7,0) ;MAKE A BYTE POINTER
MOVE T2,WTOPTR ;DESTINATION POINTER IN T2
MOVE T4,WTOCNT ;GET COUNT OF SPACE IN MESSAGE
SKIPN P1 ;FORMATTING?
PUSHJ P,W$2TAB ;YES - OUTPUT TWO TABS
SETZM SRCPTR ;CLEAR SAVED SOURCE POINTER
MTXT.0: HRLOI T3,377777 ;GET A LARGE NUMBER
MTXT.1: ILDB S2,T1 ;GET THE BYTE FROM SOURCE
JUMPE S2,MTXT.5 ;NULL...END OF DATA
CAIN S2,.CHCRT ;IS IT A CARRIAGE RETURN
JRST MTXT.1 ;YES..IGNORE IT
CAIE S2,.CHLFD ;IS IT A LINE FEED
JRST MTXT.2 ;NO..SAVE BYTE
MOVEI S2," " ;GET A BLANK
SETZ T3, ;RESET LINE COUNT
MTXT.2: CAIE S2," " ;IS IT A BLANK
JRST MTXT.3 ;NO JUST SAVE THE DATA
MOVEM T1,SRCPTR ;SAVE THE SOURCE POINTER
MOVEM T2,DESPTR ;SAVE DESTINATION POINTER
MOVEM T4,DESCNT ;MESSAGE COUNT FIELD
MTXT.3: SOJLE T4,MTXT.6 ;DECREMENT THE COUNT
IDPB S2,T2 ;PLACE BYTE IN DESTINATION
SOJG T3,MTXT.1 ;GET THE NEXT BYTE
SKIPN SRCPTR ;HAVE A BLANK IN MESSAGE
JRST MTXT.4 ;FINISH LINE
SETZ T1, ;CLEAR T1 FOR SRCPTR RESET
EXCH T1,SRCPTR ;GET THE SOURCE POINTER AND RESET IT
MOVE T2,DESPTR ;GET DESTINATION POINTER
MOVE T4,DESCNT ;GET DESTINATION COUNT
MTXT.4: PUSHJ P,W$CRLF ;END THE LINE
JUMPF MTXT.6 ;NO MORE ROOM
SKIPN P1 ;FORMATTING?
PUSHJ P,W$2TAB ;YES - OUTPUT TWO TABS
JUMPF MTXT.6 ;NO MORE ROOM
JRST MTXT.0 ;GET NEXT LINE
MTXT.5: PUSHJ P,W$CRLF ;END THE LINE
MTXT.6: MOVEI S2,0 ;GET A NULL
IDPB S2,T2 ;SAVE BYTE IN MESSAGE
MOVEM T4,WTOCNT ;RESTORE COUNT FOR MESSAGE
MOVEM T2,WTOPTR ;RESTORE DESTINATION POINTER
$RETT ;RETURN TRUE
SUBTTL W$CRLF Terminate line with CRLF
;THIS ROUTINE WILL PUT CRLF ON LINE FROM W$MTXT
W$CRLF: MOVEI S2,.CHCRT ;GET A CARRIAGE RETURN
IDPB S2,T2 ;SAVE IN DESTINATION
SOJL T4,.RETF ;NO MORE ROOM RETURN FALSE
MOVEI S2,.CHLFD ;GET A LINE FEED
IDPB S2,T2 ;SAVE IN DESTINATION
SOJL T4,.RETF ;NO MORE ROOM.RETURN FALSE
$RETT ;RETURN TRUE
SUBTTL W$2TAB Insert two TABs into message
W$2TAB: MOVEI S2,11 ;PUT OUT A TAB
IDPB S2,T2 ;SAVE IN DESTINATION
SOJL T4,.RETF ;NO MORE ROOM RETURN FALSE
IDPB S2,T2 ;SAVE IN DESTINATION
SOJL T4,.RETF ;NO MORE ROOM RETURN FALSE
$RETT ;RETURN TRUE
SUBTTL OPRMSG Build a message for OPR
;THIS ROUTINE WILL BUILD THE TEXT MESSAGE FOR OPR AND TO BE USED
;BY LOGGING IF ENABLED
OPRMES: $CALL GETPAG ;GET THE OUTPUT MESSAGE IN MO
MOVX S1,.OMDSP ;GET THE DISPLAY TYPE
STORE S1,.MSTYP(MO),MS.TYP ;SAVE TYPE IN MESSAGE
MOVEI S1,<<PAGSIZ-1>-<ARG.DA+2+.OHDRS>>*5 ;NUMBER OF BYTES AVAILABLE
;Page size -1 (so 777 works)
;Minus size of header of argument block
; and message header
;SAVE ROOM FOR TRUNCATING
MOVEM S1,WTOCNT ;SAVE IN WTOCNT
MOVSI S1,(POINT 7,0) ;SETUP BYTE POINTER
HRRI S1,ARG.DA+1+.OHDRS(MO) ;ADDRESS TO SAVE TEXT
MOVEM S1,WTOPTR ;SAVE THE BYTE POINTER
MOVE S1,G$NOW ;GET THE TIME
MOVEI P3,ARG.HD+.OHDRS(MO) ;ADDRESS OF FIRST ARGUMENT
MOVEM S1,ARG.DA(P3) ;SAVE THE TIME-STAMP
MOVX S1,.ORDSP ;OPR DISPLAY BLOCK
STORE S1,ARG.HD(P3),AR.TYP ;SAVE THE TYPE
$RETT ;RETURN TRUE
SUBTTL W$MESS Setup a WTO/WTOR/ACK message
W$MESS: SKIPN S2,.OFLAG(MI) ;ANY FLAGS SET IN MESSAGE
JRST WTOM.1 ;NO..PROCESS MESSAGE
TXNN S2,WT.PRV ;ANY PRIVILEGED BITS LIT
JRST WTOM.1 ;NO..CONTINUE ON
$CALL CHKWHL ;WAS USER PRIVILEGED??
JUMPF E$IPE ;INSUFFICIENT PRIVILEGE
TXZ S2,WT.JOB ;JOB MESSAGE FLAG
JUMPE S2,WTOM.1 ;NONE ON..PASS CHECK
WTOM.1: LOAD S1,.MSTYP(MI),MS.TYP ;GET MESSAGE TYPE
CAIE S1,.OMWTR ;WAS IT A WTOR??
MOVEI T1,[ITEXT( )] ;NO..SAVE TAB FOR FIRST FIELD
MOVEI T2,[ITEXT()] ;SAVE NULL OBJECT POINTER
MOVEI T3,[ITEXT()] ;SAVE NULL TYPE POINTER
TXNN FLAG,F.WOBJ ;WAS THERE AN OBJECT BLOCK
JRST WTOM.2 ;CHECK OUT TYPE
MOVEI T2,[ITEXT(<^B/@WDAOBJ/>)];GET OBJECT BLOCK
MOVE S1,@WDAOBJ+OBJ.TY ;GET TYPE FIELD
CAIE S1,.OTBAT ;WAS IT BATCH?
JRST WTOM.2 ;NO..CONTINUE ON
SKIPE WDAJOB ;WAS THERE A JOB NUMBER
MOVEI T2,[ITEXT(<^B/@WDAOBJ/ JOB #^D/WDAJOB/ >)]
WTOM.2: TXNE FLAG,F.WACD ;WAS THERE AN APPLICATION CODE
MOVEI T2,[ITEXT(<^T/@WDAACD/>)];SETUP APPLICATION CODE LINE
;*** SET LENGTH ON APPLICATION CODE
TXNN FLAG,F.WTYP ;TYPE FIELD PRESENT
JRST WTOM.3 ;NO SKIP OVER
MOVEI T3,[ITEXT(< -- ^T/@WDATYP/ -->)]
MOVX S1,WT.NDA ;NO DASHES ON TYPE
TDNE S1,.OFLAG(MI) ;WAS IT SPECIFIED
MOVEI T3,[ITEXT(< ^T/@WDATYP/>)]
WTOM.3: $TEXT (WTORTN,<^I/(T1)/^I/(T2)/^I/(T3)/^A>)
TXNE FLAG,F.WOBJ!F.WACD ;OBJECT OR APPLICATION BLOCK
JRST WTOM.4 ;YES..BYPASS W$JOBH
MOVX S1,WT.SJI ;SUPPRESS JOB INFO
TDNN S1,.OFLAG(MI) ;WAS IT SET?
$CALL W$JOBH ;SETUP W$JOBH FIELD
WTOM.4: $TEXT (WTORTN,<>) ;OUTPUT CR,LF
SKIPN WDATXT ;CHECK IF ANY TEXT DATA
JRST MSGFIN ;NO..FINISH THE MESSAGE
MOVX S1,WT.NFO ;NO FORMATTING OF MESSAGE
TDNN S1,.OFLAG(MI) ;WANT TO FORMAT THE MESSAGE?
TDZA P1,P1 ;YES
SETO P1, ;CLEAR FORMATTING FLAG
PUSHJ P,W$MTXT ;GET THE TEXT FOR WTO
JRST MSGFIN ;FINISH THE MESSAGE
SUBTTL MSGFIN Finish DISPLAY message
MSGFIN::SETZ S1, ;SETUP A NULL
IDPB S1,WTOPTR ;SAVE A NULL ON THE END
HRRZ S1,WTOPTR ;GET LAST ADDRESS
ADDI S1,1 ;BUMP IT BY 1
ANDI S1,777 ;GET MESSAGE LENGTH
STORE S1,.MSTYP(MO),MS.CNT ;SAVE THE COUNT
SUBI S1,.OHDRS ;SIZE OF ARGUMENT BLOCK
STORE S1,ARG.HD(P3),AR.LEN ;SAVE ARGUMENT LENGTH
AOS .OARGC(MO) ;BUMP THE ARGUMENT COUNT
$RETT ;RETURN
WTORTN: SOSGE WTOCNT ;ROOM IN MESSAGE
$RETF ;FALSE RETURN..TRUNCATE MESSAGE
IDPB S1,WTOPTR ;SAVE THE BYTE
$RETT ;RETURN TRUE
SUBTTL W$JOBH Setup a job header message
;THIS ROUTINE WILL SETUP THE JOB INFORMATION FOR WTO/WTOR
;MESSAGES
W$JOBH: LOAD S1,G$JOB ;GET THE JOB NUMBER
$CALL GETJOB ;GET THE JOB INFO
TXNE FLAG,F.WTYP ;WAS THERE A TYPE BLOCK
SKIPA S1,[[ITEXT (<^M^J >)]] ;<CRLF> <TAB> <TAB>
MOVEI S1,[ITEXT (<-- Message from timesharing user --^M^J >)]
$TEXT (WTORTN,<^I/(S1)/^I/@JOBTXT/^A>) ;OUTPUT THE JOB DATA
$RETT ;RETURN
SUBTTL GETJOB/GETJBT Get job information
;THIS ROUTINE WILL OBTAIN JOB INFORMATION ABOUT A USER GIVEN
;THE JOB NUMBER
;GETJBT is the same as GETJOB but tries to include node (location) info.
;CALL S1/ JOB NUMBER
;
; S1 PRESERVED
GETJBT:: SETOM S2 ;Set a temp flag
SKIPA
GETJOB:: SETZM S2 ;set a temp flag
STKVAR <TRMFLG> ;Get a variable for tty desc.
MOVEM S2,TRMFLG ;Save the terminal flag
MOVEM S1,JOBNUM ;SAVE THE JOB NUMBER
MOVX S2,JI.PRG ;GET PROGRAM NAME
$CALL I%JINF ;GET THE INFO
JUMPF GETJ.3 ;ERROR..RETURN
MOVEM S2,JOBNAM ;PROGRAM NAME
MOVX S2,JI.USR ;GET USER # OR PPN
$CALL I%JINF ;GET VALUE
JUMPF GETJ.3 ;ERROR..SETUP DEFAULT
SKIPN S2 ;VALID USER NUMBER
JRST GETJ.3 ;NO..USE DEFAULT
MOVEM S2,JOBID ;SAVE THE ID
TOPS10<
$CALL GETNAM ;GET THE USER NAME
>;END TOPS10
MOVX S2,JI.TNO ;GET THE TERMINAL NUMBER
$CALL I%JINF ;GET THE DATA
JUMPF GETJ.3 ;ERROR..RETURN
SKIPGE S2 ;VALID TERMINAL?
JRST [MOVEI T1,-2 ;Detached indicator
MOVEM T1,JOBTTY ;Set it
MOVEI T1,[ITEXT (<detached>)] ;NO DETACHED
JRST GETJ.1] ;SAVE VALUE AND CONTINUE
MOVEM S2,JOBTTY ;SAVE THE TERMINAL NUMBER
SKIPN TRMFLG ;Do we want to do node location of term?
JRST GETJ.0 ;No
$CALL GLOC ;Get the physical location of TTY
JUMPF GETJ.0 ;No can do... just give terminal number
MOVEM S1,JOBNOD ;Remember the job's node
MOVEM S2,JOBLIN ;and the line on that node
MOVE S1,JOBNUM ;Restore job number to S1
MOVEI T1,[ITEXT (<at ^N/JOBNOD/_^O/JOBLIN/ TTY^O/JOBTTY/>)]
SKIPA ;Don't do it again
GETJ.0: MOVEI T1,[ITEXT (<at terminal ^O/JOBTTY/>)]
GETJ.1: MOVEM T1,JOBTER ;SAVE JOB TERMINAL DATA
MOVX S2,JI.BAT ;GET BATCH INFO
;*** 7.01 DEPENDENT CODE
$CALL I%JINF ;GET JOB INFO
JUMPF GETJ.2 ;ERROR..RETURN
TXNN S2,OB.BSS ;BATCH STREAM NUMBER SET?
JRST GETJ.2 ;NO..CONTINUE ON
MOVEM S2,G$JDAT ;JOB DATA FLAG
MOVEI S2,[ITEXT (<in batch-stream ^D/G$JDAT,OB.BSN/>)]
MOVEM S2,JOBTER ;SAVE TERMINAL DATA
GETJ.2: MOVEI T1,[ITEXT (<job ^D/JOBNUM/ ^P/JOBID/ ^I/USRNAM/^I/@JOBTER/>)]
MOVEM T1,JOBTXT ;SAVE JOB TEXT POINTER
$RETT ;RETURN TRUE
GETJ.3: MOVEI T1,[ITEXT (<job ^D/JOBNUM/ ^P/G$SID/>)]
MOVEM T1,JOBTXT ;SAVE AS JOBTXT
SETOM JOBTTY ;NO JOB FLAG
MOVEI T1,NULTXT ;NULL TEXT
MOVEM T1,JOBTER ;NO TERMINAL DATA
$RETT ;RETURN TRUE
TOPS20<
USRNAM==NULTXT
>;END TOPS20
TOPS10<
USRNAM: ITEXT (<^W6/JOBUSN/^W/JOBUSN+1/ >)
>;END TOPS10
SUBTTL GLOC Get physical location of TTY
; This routine determines the physical location of a TTY. It should
; be a part of the I%JINF but the answer needs 2 words not one.
; Accepts S1 / Job number
; Returns False if the routine fails.
; Possible failures include:
; Not yet implemented
; Invalid job number
; True
; S1 / Node name/number
; S2 / Terminal line number
GLOC:
TOPS20< $RETF ;Not yet implemented >
TOPS10<
MOVEI S2,JI.TNO ;Terminal number function
$CALL I%JINF ;get it
$RETIF ;Failures are unacceptable
ADDI S2,.UXTRM ;Make it UDX
GTNTN. S2, ;Get the node number,,line number
$RETF ;Couldn't get it
HLRZ S1,S2 ;Move the node number
HRRZS S2,S2 ;Only the line number
$RETT ;Return happy
> ; End of TOPS10
SUBTTL GETUSR Get user info for notify
;THIS ROUTINE WILL GET EXTRA INFO REQUIRED BY NOTIFY AND USE
;GET JOB TO GET THE REST
;CALL S1/ JOB NUMBER
GETUSR:: $CALL GETJOB ;GET JOB INFO
SKIPL JOBTTY ;HAVE VALID TERMINAL
JRST GETU.1 ;O.K. CONTINUE ON
SETOM S2 ;Get -1
CAME S2,JOBTTY ;Invalid, or not attached?
PJRST E$NJD ;NOTIFY JOB DETACHED
PJRST E$JDE ;NOTIFY JOB INVALID
GETU.1: MOVX S2,JI.JLT ;JOB LOGGED IN TIME
$CALL I%JINF ;GET THE DATA
MOVEM S2,JOBJLT ;SAVE JOB LOGGED IN TIME
$RETT ;O.K..RETURN TRUE
SUBTTL GETNAM Get user name
;THIS ROUTINE WILL GET USER NAME FOR A GIVEN JOB
;CALL S1/ JOB NUMBER
TOPS10<
GETNAM: HRLZ S2,S1 ;PLACE JOB NUMBER IN LEFT HALF
HRRI S2,.GTNM1 ;GET THE USER NAME
GETTAB S2, ;GETTAB IT
JRST GETJ.3 ;ERROR..RETURN
MOVEM S2,JOBUSN ;SAVE IN USER NAME
HRLZ S2,S1 ;JOB NUMBER IN LEFT HALF
HRRI S2,.GTNM2 ;SECOND HALF OF NAME
GETTAB S2, ;GET IT
JRST GETJ.3 ;ERROR..RETURN
MOVEM S2,JOBUSN+1 ;SAVE THE USER NAME SECOND PART
$RET ;RETURN
>;END TOPS10
SUBTTL W$SHOW Show ACK message from QUASAR
;THIS MESSAGE IS AN ANSWER TO A SHOW COMMAND FROM QUASAR
;AND IS ALREADY FORMATED.
W$SHOW: $CALL CHKWHL ;CHECK IF WHEEL
JUMPF E$ARP ;ERROR..RETURN
LOAD S1,.MSFLG(MI) ;GET FLAG WORD
TXNE S1,MF.NOM ;NULL ACK
PJRST ACKM.1 ;LOG THE NULL ACK AND RETURN
$CALL SPGOUT ;SETUP PAGE FOR OUTPUT
$CALL L$SHWA## ;LOG THE MESSAGE
$CALL W$ASND ;SEND THE ACK
$RETT ;RETURN
SUBTTL W$ASND Send an ACK to OPR
;THIS ROUTINE WILL SEND THE MESSAGE TO THE APPROPRIATE OPR
;AND UPDATE THE COUNTS
W$ASND: SKIPN S1,.MSCOD(MI) ;GET THE ACK CODE
PJRST W$WTO ;ZERO - CHANGE INTO WTO INSTEAD
CAMN S1,[-1] ;IS IT A -1 CODE
PJRST RELPAG ;YES..THEN DO NOT SEND TO ANYONE
$CALL VALOPR ;VALIDATE OPR
JUMPF ASND.1 ;OPR NOT VALID..RELEASE PAGE AND RETURN
MOVEM S2,G$OPRA ;SAVE THE OPR ADDRESS
AOS OPR.OC(S2) ;BUMP OUTPUT COUNT
MOVE S1,OPR.PD(S2) ;GET OPR PID
MOVEI S2,PAGSIZ ;GET SIZE OF MESSAGE
PJRST SPDOPR ;SEND THE MESSAGE
ASND.1: $CALL RELPAG ;RELEASE THE PAGE
PJRST E$ODE ;OPR DOESN'T EXIST ERROR
SUBTTL W$ACKM Process an ACK message
;THIS ROUTINE WILL VALIDATE AND THEN PROCESS AN
;ACKNOWLEDGEMENT MESSAGE
W$ACKM: $CALL CHKWHL ;CHECK IF PRIVILEGED
JUMPF E$ARP ;ACK REQUIRES PRIVILEGES
LOAD S1,.MSFLG(MI) ;GET FLAG WORD
TXNE S1,MF.NOM ;NULL ACK
JRST ACKM.1 ;YES..LOG AND RETURN
$CALL W$VALID ;VALIDATE THE WTO MESSAGE
$RETIF ;FALSE RETURN...RETURN
SETZM WDAFLG ;CLEAR THE FLAGS FOR ACKS
$CALL OPRMES ;BUILD THE MESSAGE
$CALL W$MESS ;SETUP THE DATA
JUMPF WTERRO ;WT ERROR RETURN
$CALL L$ACK## ;LOG THE ACK MESSAGE
$CALL W$ASND ;SEND THE ACK
$RETT ;RETURN
ACKM.1: $CALL L$NACK## ;LOG NULL ACK
$RETT ;RETURN
SUBTTL TXTMOV Text Move Routine
;CALLED WITH
; S1/ ADDRESS OF THE DESTINATION
; S2/ ADDRESS OF THE SOURCE
;
;RETURNS
; S1/ UPDATED BYTE POINTER
TXTMOV: HRLI S2,(POINT 7,0) ;MAKE A BYTE POINTER
HRLI S1,(POINT 7,0) ;BYTE POINTER FOR DESTINATION
MOVEM S2,TXTPTR ;SAVE THE SOURCE POINTER
TXTM.1: ILDB S2,TXTPTR ;GET FIRST BYTE OF DATA
JUMPE S2,TXTM.2 ;NULL BYTE ..EXIT
IDPB S2,S1 ;SAVE THE BYTE
JRST TXTM.1 ;GET NEXT BYTE
TXTM.2: IDPB S2,S1 ;SAVE THE NULL FOR ASCIZ
$RETT ;RETURN
SUBTTL CMDMES Process a DN60 command message
;THIS ROUTINE WILL PROCESS A COMMAND PASSED IN THE MESSAGE AND
;PASS IT ON TO THE APPROPRIATE OPR (DN60 ONLY)
PPPLLL==777000 ;PORT /LINE MASK
IFN FTDN60,<
CMDMES: $CALL CHKWHL ;BETTER BE WHEEL OR OPERATOR
$RETIF ;ERROR..RETURN
MOVEI S1,.OHDRS(MI) ;GET THE START OF THE BLOCKS
$CALL P$SETU ;SETUP THE POINTER
$CALL P$NFLD ;GET NEXT FIELD
JUMPF E$ITM ;INVALID TYPE ARGUMENT
CAIE S1,.ORNOD ;WAS IT A NODE BLOCK
PJRST E$ITM ;INVALID TYPE ARGUMENT
MOVE T3,ARG.DA(S2) ;GET THE NODE NAME IN SIXBIT
$CALL P$NFLD ;GET THE NEXT FIELD
JUMPF E$ITM ;INVALID TYPE MESSAGE
CAIE S1,.ORD60 ;WAS IT A DN60 BLOCK
PJRST E$ITM ;INVALID BLOCK TYPE
DMOVE P1,ARG.DA(S2) ;GET THE DATA WORDS
HLRZ S1,P1 ;GET THE PORT NUMBER
HRRO S2,P1 ;SETUP -1,, LINE NUMBER
STORE S1,S2,PPPLLL ;SAVE AS -1,,PPPLLL
MOVEM S2,.MSCOD(MI) ;SAVE ACK CODE
EXCH S2,G$SND ;SAVE AS THE SENDER
MOVE S1,G$SND ;GET THE HANDLE
$CALL VALOPR ;VALIDATE THE OPR
JUMPF E$ONS ;OPR NOT SETUP
MOVEM S2,G$OPRA ;SAVE OPR ADDRESS
$CALL P$TEXT ;CHECK FOR A TEXT BLOCK
JUMPF E$ITM ;INVALID TYPE BLOCK
MOVEI S1,ARG.DA(S1) ;ADDRESS OF THE STRING
MOVEM S1,PARBLK+PAR.SR ;SAVE THE TEXT ADDRESS
MOVEI S1,INITCM## ;ADDRESS OF THE TABLES
MOVEM S1,PARBLK+PAR.TB ;SAVE THE TABLE ADDRESS
MOVEI S1,PAR.SZ ;SIZE OF THE BLOCK
MOVEI S2,PARBLK ;ADDRESS OF THE BLOCK
$CALL PARSER## ;PROCESS THE MESSAGE
JUMPT CMDM.1 ;O.K..
MOVE T1,PRT.EM(S2) ;ADDRESS OF THE MESSAGE
MOVEM T1,G$ARG1 ;SAVE THE MESSAGE
PJRST E$PER ;PARSER ERROR RETURN
CMDM.1: MOVE MI,PRT.CM(S2) ;GET MESSAGE ADDRESS
JRST COMMAN ;PROCESS THE COMMAND
>;END FTDN60
SUBTTL COMMAN Process an OPR command message (ala OPRPAR)
;THIS ROUTINE TAKES THE MESSAGE SENT BY THE PARSER AS THE RESULT OF A
;VALID COMMAND AND DISPATCHES TO THE APPROPRIATE ACTION ROUTINE BASED
;ON THE COMMAND TYPE
;IT IS CALLED WITH MI POINTING TO THE PAGE CONTAINING THE MESSAGE
COMMAN: MOVE S1,G$SND ;GET THE SENDERS PID
$CALL VALOPR ;VALIDATE THE OPERATOR
JUMPF E$ONS ;OPR NOT SETUP
MOVEM S2,G$OPRA ;SAVE OPR ENTRY ADDRESS
TOPS20<
MOVX T1,MD.PWH!MD.POP ;GET WHEEL AND OPR FLAGS
MOVX S1,OP.REM ;IS IT REMOTE OPERATOR
TDNE S1,OPR.FL(S2) ;CHECK THE FLAG
ANDCAM T1,G$PRVS ;YES..CLEAR PRIVILEGES FOR MESSAGES
>;END TOPS20
MOVE T1,OPR.FL(S2) ;GET THE FLAGS
TXNE T1,OP.NST ;CHECK IF SETUP?
PJRST E$ONS ;OPERATOR NOT SETUP
TXNE T1,OP.ABT ;WAS ABORT SET
$RETT ;YES..EXIT NOW
$CALL L$CMD## ;LOG THE COMMAND
SKIPG T1,.OARGC(MI) ;GET THE ARGUMENT COUNT
JRST E$ICS ;INVALID COUNT SPECIFIED
CAILE T1,COM.AL ;LESS THAN MAX SIZE
JRST E$ICS ;WRONG COUNT SPECIFIED
MOVX T2,CM.NPR ;NO PROCESSING REQUIRED
TDNE T2,.OFLAG(MI) ;CHECK IF SET??
$RETT ;YES..RETURN TRUE
COMM.1: SKIPN S2,COM.PB(MI) ;WAS PARSER BLOCK FILLED IN
PJRST E$CMI ;COMMAND MESSAGE INVALID
SKIPE S1,COM.TY(MI) ;CHECK FOR APPLICATION MESSAGE
JRST COMM.6 ;YES..SEND TO APPLICATION
ADDI S2,(MI) ;POINT PB AT THE BLOCK
MOVE S1,S2 ;GET THE BLOCK POINTER
$CALL P$SETU ;SETUP THE POINTER
$CALL P$KEYW ;GET THE FIRST KEYWORD
JUMPF COMM.3 ;INVALID COMMAND
MOVSI T1,-COMLEN ;GET NEGATIVE TABLE LENGTH FOR AOBJN
COMM.2: HLRZ T2,COMTAB(T1) ;GET THE CODE FOR THIS INDEX
CAME T2,S1 ;MATCH?
AOBJN T1,COMM.2 ;LOOP 'TILL COUNT EXPIRES OR MATCH IS FOUND
JUMPGE T1,E$IFC ;ILLEGALLY FORMATTED COMMAND
HRRZ T1,COMTAB(T1) ;GET DISPATCH ADDRESS FROM TABLE
HRRZ T2,@T1 ;GET THE ROUTINE ADDRESS IN T2
$CALL GETPAG ;OUTPUT PAGE IN MO
HLRZ S1,@T1 ;PLACE CODE TYPE IN S1
STORE S1,.MSTYP(MO),MS.TYP ;SAVE TYPE IN MESSAGE
MOVEI P3,.OHDRS(MO) ;FREE POINTER FOR OUTPUT
$CALL (T2) ;DISPATCH TO CORRECT ROUTINE
JUMPF COMM.3 ;BAD RETURN..SHOW ERROR
SKIPN G$ERR ;ANY ERROR CODES SET
$RETT ;RETURN
JRST COMM.5 ;DUMP ERROR IN LOG
COMM.3: $CALL E$IFC ;ILLEGALLY FORMATTED COMMAND
JRST COMM.5 ;PUT MESSAGE IN LOG
COMM.4: $CALL E$MTS ;MESSAGE TOO SHORT
COMM.5: CAME MO,G$OUTP ;WAS PAGE RELEASE ALREADY
PJRST RELPAG ;NO,,RELEASE PAGE AND RETURN
$RETT ;JUST RETURN
COMM.6: $CALL FNDAPL ;FIND THE APPLICATION
JUMPF E$IFC ;INVALID FIELD IN COMMAND
COMM.7: MOVE T1,APLTAB+1(S2) ;GET COMMAND TABLE ENTRY
HLRZM T1,G$ARG1 ;SAVE THE NAME
SKIPN T2,APLPID(S2) ;IS THERE A PID THERE
JRST TAKABT ;INVALID APPLICATION SPECIFIED
MOVE T1,G$SND ;GET SENDERS PID
MOVEM T1,.MSCOD(MI) ;SAVE IN CODE WORD
$CALL SPGOUT ;SETUP THE OUTPUT PAGE
MOVEI S2,PAGSIZ ;SEND A PAGE
MOVE S1,T2 ;GET THE PID
$CALL SNDPID ;SEND THE MESSAGE
$RETIT ;OK..RETURN
$CALL RELPAG ;RELEASE THE PAGE
PJRST TAKABT ;DO TAKE FILE ABORT
SUBTTL FNDAPL Find an application
;THIS ROUTINE WILL FIND THE APPLICATION
;
;S1/ CODE OF APPLICATION
;
;RETURN TRUE: S1/ CODE OF APPLICATION
; S2/ OFFSET INTO CODE TABLE
FNDAPL: MOVSI S2,-NUMAPL ;GET NUMBER OF ENTRIES
SKIPN S2 ;ANY ENTRIES
$RETF ;NONE..RETURN FALSE
FNDA.1: MOVE T1,APLCOD(S2) ;GET THE FIRST ENTRY
CAMN S1,T1 ;DOES IT MATCH
$RETT ;MATCH..RETURN TRUE
AOBJN S2,FNDA.1 ;TRY NEXT ENTRY
$RETF ;NOT FOUND..RETURN FALSE
SUBTTL Dispatch Table for Command Messages
;EACH ENTRY HERE HAS THE APPROPRIATE KEYWORD CODE IN THE LH AND
;THE ADDRESS OF THE ROUTINE FOR THAT COMMAND IN THE RIGHT HALF
COMTAB:
.KYALI,,[.OMALI,,Q$ALGN##] ;ALIGN COMMAND
.KYBKS,,[.OMBKS,,Q$BSPACE##] ;BACKSPACE COMMAND
.KYCNC,,[.OMCAN,,Q$ABORT##] ;ABORT COMMAND
.KYCLO,,[0,,CLSLOG] ;CLOSE COMMAND
.KYCNT,,[.OMCON,,Q$CONTIN##] ;CONTINUE COMMAND
IFN FTDN60,<
.KYDEF,,[.OMDEF,,Q$DEFINE##] ;DEFINE COMMAND
>;END FTDN60
.KYDEL,,[.OMDEL,,Q$CANCEL##] ;CANCEL COMMAND
.KYDIS,,[.OMDIS,,DISABLE] ;DISABLE MESSAGE
.KYDSM,,[.ODDSM,,Q$DISMOUNT##] ;DISMOUNT COMMAND
.KYENA,,[.OMENA,,ENABLE] ;ENABLE MESSAGE
.KYFWS,,[.OMFWS,,Q$FSPACE##] ;FORWARDSPACE COMMAND
.KYHLD,,[.OMHLD,,Q$HOLD##] ;HOLD
.KYIDN,,[.ODIDN,,Q$IDENTIFY##] ;IDENTIFY COMMAND
TOPS10< .KYLOC,,[.ODLOC,,Q$LOCK##]> ;LOCK COMMAND
.KYMOD,,[.OMMOD,,Q$MODIFY##] ;MODIFY COMMAND
TOPS10< .KYMTN,,[.ODMTS,,Q$MOUNT##]> ;MOUNT COMMAND FOR STRUCTURES
.KYNXT,,[.OMNXT,,Q$NEXT##] ;[NXT] NEXT COMMAND
.KYPAU,,[.OMPAU,,Q$PAUSE##] ;PAUSE COMMAND
TOPS10< .KYREC,,[.ODREC,,Q$RECOGNIZE##] >;RECOGNIZE COMMAND
.KYREL,,[.OMREL,,Q$RELEASE##] ;RELEASE, PROCESSED LIKE HOLD
.KYREQ,,[.OMREQ,,Q$REQUE##] ;REQUEUE COMMAND
.KYRPT,,[0,,REPORT] ;REPORT COMMAND
.KYRTE,,[.OMRTD,,Q$ROUTE##] ;DEVICE ROUTE COMMAND
.KYRSP,,[.OMRSP,,RESPON] ;RESPOND COMMAND
.KYSND,,[.OMDSP,,SEND] ;SEND COMMAND
.KYSET,,[.OMSET,,Q$SET##] ;SET COMMAND
.KYSHW,,[.OMSHS,,SHOW] ;SHOW COMMAND ..DEFAULT TYPE OF STATUS
.KYSHD,,[.OMSHT,,Q$SHUTDN##] ;SHUTDOWN COMMAND
.KYSTA,,[.OMSTA,,Q$START##] ;START COMMAND
.KYSUP,,[.OMSUP,,Q$SUPPRE##] ;SUPPRESS COMMAND
TOPS20 <.KYSWI,,[.ODSWI,,Q$SWITCH##]> ;SWITCH COMMAND
.KYTAK,,[0,,TAKCMD] ;TAKE COMMAND
TOPS10 <.KYULC,,[.ODULC,,Q$ULOCK##]> ;UNLOCK COMMAND
; .KYUNL,,[.ODUNL,,Q$UNLOAD##] ;UNLOAD COMMAND
COMLEN==.-COMTAB
SUBTTL TAKCMD Setup for a TAKE command
;THIS COMMAND WILL SETUP THE OPR AS IN A TAKE COMMAND
;BY TURNING ON A FLAG IN THE OPR DATA BASE
TAKCMD: $CALL RELPAG ;RETURN THE PAGE
MOVE S1,G$OPRA ;GET OPR ADDRESS
MOVX S2,OP.TAK ;GET TAKE FLAG
IORM S2,OPR.FL(S1) ;SAVE THE FLAG
$RETT ;AND RETURN
SUBTTL TAKEND Reset effects of TAKE command
;THIS ROUTINE WILL CLEAR TAKE FILE FLAGS IN OPR DATA BASE
TAKEND: MOVE S1,G$SND ;GET THE SENDER
$CALL VALOPR ;VALIDATE THE OPERATOR
JUMPF E$ONS ;OPR NOT SETUP
MOVEM S2,G$OPRA ;SAVE OPR ADDRESS
MOVX S1,OP.TAK!OP.ABT ;GET TAKE FLAG
ANDCAM S1,OPR.FL(S2) ;CLEAR THE FLAG
$RETT ;RETURN
SUBTTL TAKABT Abort current TAKE command
;THIS ROUTINE WILL GENERATE ERROR FOR TAKE FILE ABORT
;WHERE G$ARG1 ALREADY CONTAINS THE ADDRESS OF THE STRING
;FOR THE ERROR MESSAGE
TAKABT: MOVE S2,G$OPRA ;GET OPR ADDRESS
MOVE S1,OPR.FL(S2) ;GET THE FLAGS
TXNN S1,OP.TAK ;WAS IT A TAKE COMMAND
PJRST E$IAP ;INVALID PROCESS..NOT RUNNING
TXOE S1,OP.ABT ;WAS ABORT SET
$RETT ;YES...JUST RETURN
MOVEM S1,OPR.FL(S2) ;RESET THE FLAGS
MOVE S1,COM.CM(MI) ;GET OFFSET FOR TEXT
ADDI S1,ARG.DA(MI) ;POINTER TO TEXT
MOVEM S1,G$ARG2 ;SAVE THE ADDRESS
MOVE S2,S1 ;GET THE ADDRESS
HRLI S2,(POINT 7,0) ;MAKE A POINTER
TAKA.1: ILDB S1,S2 ;GET A BYTE
JUMPE S1,TAKA.2 ;NULL EXIT
CAIE S1,.CHCRT ;IS IT A CARRIAGE RETURN
JRST TAKA.1 ;TRY NEXT ONE
SETZ S1,0 ;MAKE A NULL
DPB S1,S2 ;REPLACE WITH A NULL
TAKA.2: PJRST E$TAB ;TAKE ABORT
SUBTTL GETPAG Setup MO with address of output message
;THIS ROUTINE WILL GET A PAGE ADDRESS SETUP IN MO BY GETTING A NEW PAGE.
GETPAG:: $CALL M%GPAG ;GET A PAGE
MOVE MO,S1 ;SAVE ADDRESS IN MO
$RETT ;RETURN TRUE
SUBTTL RELPAG Release output page
;SETS UP SAVED WORD G$OUTP WITH ADDRESS OF PAGE
RELPAG:: MOVE S1,MO ;get the current page pointer
$CALL M%RPAG ;RELEASE THE PAGE
SETZM MO ;clear pointer to minimize confusion
$RETT ;RETURN TRUE
SUBTTL ERRALL Error Message to All
;This routine will Build the ACK for an error and send it to
;all Operators on the system
ERRALL:: LOAD S1,G$JOB ;GET JOB NUMBER
$CALL GETJOB ;GET JOB INFO
$CALL BLDACK ;BUILD THE ACK
SETOM S1 ;SEND TO ALL
SETZM G$ERR ;CLEAR ERROR WORD
SETOM G$ASND ;FORCE MESSAGE OUT
PJRST SNDAOP ;SEND TO ALL OPERATOR
SUBTTL DISABLE/ENABLE commands
;THE ENABLE AND DISABLE COMMANDS ARE COMPLEMENTS OF EACH OTHER
;FOR ALL ACTIONS
ENABLE: TDZA P1,P1 ;Clear flag for enable
DISABL: SETOM P1 ;Set flag for disable
$CALL P$KEYW ;GET A KEYWORD
$RETIF ;ERROR..CHECK OTHER OPTIONS
MOVEI S2,ENADSP ;ENABLE DISPATCH TABLE
$CALL TABSRC ;SEARCH THE TABLE
$RETIF ;ERROR..RETURN
MOVE S1,G$SND ;GET SENDER'S PID
PJRST (S2) ;PROCESS ROUTINE AND RETURN
ENADSP: $STAB
.KYAVR,,Q$ETAPE## ;ENABLE AVR
.KYQUE,,ENAQUE ;ENABLE QUEUE REQUESTS
.KYLGG,,ENALOG ;ENABLE LOGGING
.KYOPD,,ENAODP ;ENABLE OUTPUT-DISPLAY
TOPS20< .KYCLS,,ENACLS> ;ENABLE CLASS SCHEDULER
TOPS20< .KYRET,,ENARET> ;ENABLE FILE-RETREVIAL WAITS
TOPS10< .KYASR,,Q$ESTR##> ;ENABLE ASR
$ETAB
ENAQUE: $CALL VALOPR ;INSIST ON OPR
JUMPF E$IPE ;NOT OPR, QUIT
MOVE S1,G$HOST ;Get host node name
$CALL OPRENB ;Must be system or host
$RETIF ;Return on failure
PJRST CMDEND ;FINISH COMMAND AND SEND
SUBTTL ENAODP ENABLE OUTPUT display command
ENAODP: $CALL P$KEYW ;GET A KEYWORD
$RETIF ;ERROR..RETURN
MOVE P3,S1 ;Save the keyword type
SETZ P2, ;No switches seen
ENAO.1: $CALL P$SWIT ;CHECK FOR A SWITCH
JUMPF ENAO.2 ;Finished on last switch
CAIN S1,.SWJOB ;IS IT JOB MESSAGES
IORX P2,WO.JOB ;Yes
CAIN S1,.SWOAM ;OPERATOR ACTION MESSAGES?
IORX P2,WO.OAC ;Yes
CAIN S1,.SWOTH ;WAS IT OTHER?
IORX P2,WO.EVM ;Yes
JRST ENAO.1 ;Try for another switch
ENAO.2: CAIN P2,0 ;Any switches seen?
MOVX P2,WO.ALL ;No..setup all
CAIN P3,.KYALM ;Want all message types
MOVSI P3,-<.OTMAX+NUMAPL+1> ;Yes..do for all types
ENAO.3: HRRZ S1,P3 ;Get keyword type
MOVE S2,P2 ;Get flags to set or clear
ENAO.4: SKIPN P1 ;Want to Enable
$CALL SETODP ;Yes..go do it
SKIPE P1 ;No..want to disable
$CALL CLRODP ;Yes..go do it
$RETIF ;Return on failure
AOBJN P3,ENAO.3 ;Repeat for all types
PJRST E$ODM ;Return the ACK
;SETODP Set flags to ENABLE output display
;CLRODP Clear flags to DISABLE output display
;Accepts S1/ Object type
; S2/ Flags
SETODP: MOVE TF,[IORM T1,OPR.OF(S1)] ;Set the flags
SKIPA
CLRODP: MOVE TF,[ANDCAM T1,OPR.OF(S1)] ;Clear the flags
MOVE T1,S2 ;Save the flags
CAILE S1,APLBEG ;Application object type?
SUBI S1,APLBEG-.OTMAX ;Yes..compute object offset
CAIL S1,.KYUSR ;Check range
CAILE S1,NUMAPL+.OTMAX
PJRST E$IFC ;Bad command message
IDIVI S1,<^D36/<WID(WO.ALL)>> ;Compute word offset
IMULI S2,<WID(WO.ALL)> ;Compute bit offset
MOVNS S2 ;Force shift right
LSH T1,0(S2) ;Position the mask
ADD S1,G$OPRA ;Add Base of OPR entry
XCT TF ;Set/Clear the flag
$RETT ;Return to caller
SUBTTL ENALOG ENABLE/DISABLE LOG command
;THIS ROUTINE WILL EITHER OPEN OR CLOSE THE LOG FILE WHERE POSSIBLE
;ELSE GENERATE AN ERROR
ENALOG: MOVX S1,FWMASK ;POINT TO ALL NODES
$CALL OPRENB ;MUST BE SYSTEM
$RETIF
$CALL P$CFM ;IS THERE A CONFIRM?
$RETIF ;NO..BAD COMMAND
SKIPN P1 ;DISABLING?
JRST ENAL.1 ;ENABLE LOG
$CALL L$REL## ;RELEASE THE LOG FILE
JUMPF .RETT ;ERROR RETURN.. MESSAGE GENERATED
SETZM LOGINT## ;LOGGING DISABLED
$CALL E$LFC ;SET LOG FILE CLOSED
ENAL.0: $CALL RELPAG ;RELEASE THE PAGE
PJRST ERRALL ;ERROR MESSAGE TO ALL OPERATORS
ENAL.1: $CALL L$OPNL## ;OPEN THE LOG
JUMPF .RETT ;ERROR..RETURN
SETOM LOGINT## ;MARK LOGGING ENABLED
$CALL E$OLO ;ORION LOG FILE OPEN
PJRST ENAL.0 ;FINISH IT OFF
SUBTTL CLSLOG Process the CLOSE LOG command
;THIS ROUTINE WILL PROCESS THE CLOSE COMMAND AND CLOSE THE LOG FILE
CLSLOG: MOVX S1,FWMASK ;POINT TO ALL NODES
$CALL OPRENB ;MUST BE SYSTEM OPR
$RETIF
$CALL L$CLOS## ;CLOSE THE LOG
$RETT
SUBTTL ENACLS ENABLE CLASS-SCHEDULING commands (TOPS20)
;CLASS SCHEDULER SETTING FOR THE -20
TOPS20<
ENACLS: MOVX S1,FWMASK ;POINT TO ALL NODES
$CALL OPRENB ;MUST BE SYSTEM
$RETIF
SETZM P2 ;SCHEDULER VALUES
ENAC.1: $CALL P$CFM ;END OF COMMAND
JUMPT ENAC.3 ;DO THE FUNCTION
$CALL P$SWIT ;CHECK FOR A SWITCH
$RETIF ;ERROR..RETURN
CAIE S1,.SWCAS ;WAS IT CLASS ASSIGNMENTS
JRST ENAC.2 ;NO..TRY WINDFALL
$CALL P$KEYW ;GET THE KEYWORD
$RETIF ;ERROR..RETURN
SETZM T2 ;CLEAR INDICATOR WORD
CAIN S1,.KYACT ;IS IT BY ACCOUNT?
MOVX T2,SK%ACT ;GET THE ACCOUNT FLAG
IOR P2,T2 ;PLACE VALUES IN P2
JRST ENAC.1 ;CHECK FOR END
ENAC.2: CAIE S1,.SWWFL ;WINDFALL?
$RETF ;NO..BAD COMMAND
$CALL P$KEYW ;GET THE KEYWORD
$RETIF ;ERROR..RETURN
SETZM T2 ;CLEAR THE VALUE
CAIN S1,.KYWHD ;WAS IT WITHHELD
MOVX T2,SK%WDF ;WITHHOLD WINDFALL
IOR P2,T2 ;PLACE VALUE IN P2
JRST ENAC.1 ;CHECK FOR THE END
ENAC.3: SKIPE P1 ;ENABLE COMMAND
MOVX P2,SK%STP ;TURN OF SCHEDULER
MOVX S1,.SKICS ;GET THE FUNCTION
MOVEI S2,T1 ;BLOCK IN T1
MOVEI T1,2 ;LENGTH OF THE BLOCK
MOVE T2,P2 ;GET THE DATA
SKED% ;DO THE FUNCTION
ERJMP ENAC.4 ;TRAP ERROR
MOVEI S1,[ASCIZ/enabled/] ;ENABLED
SKIPE P1 ;ENABLING?
MOVEI S1,[ASCIZ/disabled/] ;DISABLED
MOVEM S1,G$ARG1 ;SAVE THE ERROR
PJRST E$CSE ;CLASS SCHEDULER ENABLED/DISABLED
ENAC.4: MOVE S1,[EXP -2] ;LAST -20 ERROR
MOVEM S1,G$ARG1 ;SAVE THE ARGUMENT
PJRST E$CSF ;CLASS SCHEDULER ERROR
>;END TOPS20
SUBTTL ENARET ENABLE FILE-RETRIEVAL commands (TOPS20)
TOPS20<
ENARET: MOVE S1,G$HOST ;GET LOCAL HOST
$CALL OPRENB ;Check OPR privs
$RETIF
MOVEI T1,[ASCIZ/enable/] ;GET THE ENABLE
SKIPE P1 ;ENABLE OR DISABLE?
MOVEI T1,[ASCIZ/disable/] ;DISABLING
MOVEM T1,G$ARG1 ;SAVE THE VALUE
MOVE S2,P1 ;VALUE SAME AS ENABLE/DISABLE VALUE
MOVEI S1,.SFRTW ;SET FUNCTION CODE
SMON ;SET THE VALUE
ERJMP E$RWF ;TRAP THE ERROR AND GENERATE A MESSAGE
PJRST E$FRW ;FILE RETREVIAL WAITS MODIFIED
>;END TOPS20
SUBTTL NOTIFY Write message to terminal for quasar
;OUTPUT TO TERMINAL FOR QUASAR
NOTIFY: $CALL CHKWHL ;MUST BE WHEEL
JUMPF E$NRW ;NOTIFY REQUIRES WHEEL
MOVEI S1,.OHDRS(MI) ;SETUP POINTER TO BLOCK
$CALL P$SETU ;SETUP THE PARSER POINTER
MOVX S1,NT.MLU ;NOTIFY VIA MAIL
TDNE S1,.OFLAG(MI) ;IS IT SET?
JRST NOTI.1 ;YES..DO MAIL
$CALL L$NTFY## ;LOG THE NOTIFY
$CALL P$NARG ;GET THE NEXT ARGUMENT
MOVE P1,S2 ;SAVE THE BLOCK ADDRESS
CAIE S1,.JOBID ;JOB ID BLOCK
PJRST E$IFC ;BAD MESSAGE
LOAD S1,JBI.JB(P1) ;GET THE JOB NUMBER
$CALL GETUSR ;GET USER INFO
$RETIF ;NOT THERE..RETURN
LOAD S1,JBI.LI(P1) ;GET LOGGED IN TIME
CAME S1,JOBJLT ;SAME JOB
PJRST E$JDE ;JOB TO NOTIFY NOT THERE
$CALL P$NEXT ;GET TO NEXT FIELD
$CALL P$TEXT ;TEXT BLOCK
JUMPF E$IFC ;BAD MESSAGE
MOVEI S2,ARG.DA(S1) ;POINT TO THE DATA
PUSHJ P,NOTCHK ;CHECK TO SEE IF USER WANTS MESSAGE
SKIPF ;DOESN'T WANT IT
MOVE S1,JOBTTY ;GET LINE NUMBER
$CALL SNDTTY ;SEND THE MESSAGE
$RETT ;RETURN
NOTI.1:
TOPS10<
$RETT ;RETURN FOR NOW
>;END TOPS10
TOPS20<
$CALL P$TEXT ;GET THE TEXT
JUMPF E$IFC ;ILLEGALLY FORMATTED COMMAND
HRROI S2,ARG.DA(S1) ;POINTER TO TEXT
MOVEM S2,NFYTXT ;NOTIFY TEXT POINTER
$CALL P$DIR ;GET THE DIRECTORY
JUMPF E$IFC ;BAD COMMAND
MOVEM S1,NFYDIR ;NOTIFY DIRECTORY
$CALL P$NFLD ;GET NEXT FIELD DATA
JUMPF E$IFC ;SHOULDN'T FAIL
CAIE S1,.NTSUB ;IS IT THE SUBJECT
PJRST E$IFC ;BAD COMMAND
HRROI S1,ARG.DA(S2) ;GET THE DATA POINTER
MOVEM S1,NFYSUB ;NOTIFY SUBJECT
$CALL MLINIT## ;INIT THE CALL
MOVEI S1,NFYDIR ;GET ADDRESS OF BLOCK
MOVEI S2,1 ;DEC MAIL
$CALL MLTOWN## ;MAIL IT
$CALL MLDONE## ;FINISHED IT..
$RETT ;RETURN
>;END TOPS20
; Check to see if a user wants notify junk to come out on his/hers/its TTY
; Call: PUSHJ P,NOTCHK
;
; TRUE return: user wants notify
; FALSE return: user doesn't want notify
;
NOTCHK:
TOPS10 < ;TOPS-10 ONLY
MOVN TF,JOBNUM ;GET NEGATIVE JOB NUMBER
JOBSTS TF, ;READ JOB STATUS
$RETF ;NOT THERE
TXNE TF,JB.UML ;AT MONITOR LEVEL ?
$RETT ;YES - OK TO SEND
$SAVE <T1,T2> ;SAVE SOME ACS
MOVE TF,[2,,T1] ;SET UP UUO
MOVX T1,.TOSND ;LOAD FUNCTION CODE
MOVE T2,JOBTTY ;LOAD TTY NUMBER
TXO T2,.UXTRM ;OFFSET BY UNIVERSAL DEVICE INDEX
TRMOP. TF, ;READ TTY GAG SETTING
MOVEI TF,.-. ;CAN'T - ASSUME GAGGED
JUMPE TF,.RETF ;TTY GAGGED ?
$RETT ;NO
> ;END OF TOPS-10 CONDITIONAL
TOPS20 < ;TOPS-20 ONLY
$RETT ;RETURN
> ;END OF TOPS-20 CONDITIONAL
SUBTTL SEND Process the SEND command
SEND: $CALL P$KEYW ;Get the KEYWORD
$RETIF ;Return on failure
MOVEI S2,SNDDSP ;Point to the possibles
$CALL TABSRC ;Find the right one
$RETIF ;Return on failure
PJRST 0(S2) ;Dispatch to processor
SNDDSP: $STAB
.KYALL,,SNDALL ;SEND ALL
.KYBAT,,SNDBAT ;SEND BATCH-STREAM
.KYJOB,,SNDJOB ;SEND JOB
.KYOPR,,SENDOP ;SEND OPERATOR
.KYTRM,,SNDTRM ;SEND TERMINAL
$ETAB
SNDBAT: $CALL P$PREV ;Point parse before keyword
$CALL BLDOBJ ;Build the object block
$RETIF
$CALL BLDSND ;Build the message to send
$RETIF ;Return on failure
MOVX S1,.OMSND ;Set the message type
STORE S1,.MSTYP(MO),MS.TYP ;STORE IN THE MESSAGE
$CALL SNDQSR ;Send it off
$RET ;And return
SNDJOB: $CALL P$NUM ;Get terminal number
$RETIF ;Return on failures
MOVX S2,JI.TNO ;Get terminal number
$CALL I%JINF
JUMPF E$CSU ;Can't send to user
CAMN S2,[EXP -1] ;Detatched?
PJRST E$CSU ;Yes..Can't send to user
SKIPA S1,S2 ;Terminal number to S1
SNDTRM: $CALL P$NUM ;Get Terminal number
$RETIF ;Return on failure
$SAVE <P1> ;Preserve an AC
MOVE P1,S1 ;Save the number
$CALL BLDSND ;Build the message to send
MOVEI S2,ARG.DA(S1) ;Point to message
MOVE S1,P1 ;Restore terminal numbre
$CALL SNDTTY ;Send it off
PJRST E$SCC ;Say send complete
SUBTTL SNDALL Process SEND ALL command
SNDALL: $SAVE <P1> ;Preserve an AC
$CALL DEFNOD ;Get default node for OPR
MOVE P1,S1 ;Store in P1
SNDAL1: $CALL P$SWITCH ;Check for switches
JUMPF SNDAL2 ;None there..use default
CAIE S1,.SWNOD ;Was it /NODE?
$RETF ;No..return the failure
$CALL P$NODE ;Yes..get the specified node
MOVEM S1,G$ARG1 ;Save for error text
MOVE P1,S1 ;Save the node name for the future
$CALL TTYNOD ;Check for terminal lines and ck. node
JUMPF E$INT ;No dice..return the error
SNDAL2: MOVE S1,P1 ;Get node to check
$CALL OPRENB ;Check the privs
$RETIF ;Return on failure
$CALL BLDALL ;Build the message
$RETIF ;Return on failure
$CALL SNDALX ;Do the send
$CALL RELPAG ;Release the page
PJRST E$SCC ;Ack the operator
SUBTTL DEFNOD Routine to return default node for OPR
;DEFNOD return the default node to associate with this OPR.
;If the OPR has system privs the default is All nodes [-1]
;else the physically located node is the default
;Accepts G$OPRA setup from received message
;Returns S1/ Physically located node or [-1] for all
DEFNOD: MOVE S1,G$OPRA ;Get OPR address
$CALL O$SYSTEM ;System OPR?
JUMPT [MOVX S1,FWMASK ;Yes..default to ALL
JRST DEFND1] ;Go return
MOVE S1,G$OPRA ;No..get OPR address
MOVE S1,OPR.ND(S1) ;Get Node data address
MOVE S1,NOD.NM(S1) ;Get OPR's default
DEFND1: $RET
SUBTTL TTYNOD Check for terminals on node
; This routine checks for any terminals on a node specified.
; For TOPS-10, it checks for any terminals on the node.
; For TOPS-20, it checks that the node specified is the host
; node since there is no terminal concentration currently.
; Calls: None
; Needs: None
; Uses: T regs. (TOPS-10 only)
; Args: S1 / Node name/number
; Returns: True if terminals exist, false otherwise.
TTYNOD:
TOPS10<
; Need to set up an argument block for NODE. uuo using the T registers
MOVEI T1,4 ;Length of argument block
MOVE T2,S1 ;Get the node name
SETZM T3 ;For no good reason, this MUST be 0!
HRRZI T4,.TYTTY ;Check for terminal lines
MOVE S1,[XWD .NDRCI,T1] ;Set it up
NODE. S1, ;Try it out
$RETF ;Someone's lying
HLRZ S1,T4 ;Get the number of terminals
SKIPLE S1 ;Do we have any?
$RETT ;Yes
$RETF ;No
> ; End of TOPS10
TOPS20<
CAME S1,G$HOST ;Only allow the system name as node
$RETF ;Confused operator
$RETT
> ; End of TOPS20
SUBTTL SENDOP Send to operator command
;THIS ROUTINE WILL BUILD AND QUEUE UP A MESSAGE TO OPRS
;BASED ON THE SEND COMMAND
SENDOP: SETOM G$ASND ;FORCE MESSAGE TO OPRS
$CALL P$SWIT ;CHECK FOR A SWITCH
JUMPT SENO.1 ;CHECK OUT SWITCH
MOVE S1,G$OPRA ;GET OPERATOR ADDRESS
MOVE S2,OPR.ND(S1) ;GET NODE ADDRESS
MOVE P2,NOD.NM(S2) ;GET NODE NAME
CAME P2,G$HOST ;IS IT CENTRAL SITE?
JRST SENO.2 ;NO..USE LOCAL NODE
$CALL BLDSND ;BUILD THE SEND
$RETIF ;ERROR RETURN
SETOM S1 ;SEND TO ALL OPERATORS
$CALL SNDAOP ;SEND TO ALL
JRST SENO.3 ;Go to return
SENO.1: CAIE S1,.SWNOD ;WAS IT A NODE
$RETF ;NO..ERROR..RETURN
$CALL P$NODE ;GET THE NODE
$RETIF ;ERROR ..RETURN
MOVE P2,S1 ;SAVE THE NODE VALUE
SENO.2: MOVEM P2,G$ARG1 ;SAVE THE NODE NAME
MOVE S1,P2 ;GET NODE NAME
$CALL FNDNOD ;FIND THE NODE
JUMPF E$NON ;NO OPERATORS AT NODE
MOVE P2,S2 ;GET NODE ENTRY ADDRESS
$CALL BLDSND ;BUILD THE SEND MESSAGE
$RETIF ;ERROR..ABORT NOW
SETOM NOALTN ;NO ALTERNATE NODES
MOVE S1,P2 ;GET NODE ENTRY ADDRESS
$CALL SNDNAL ;SEND TO ALL OPERATORS NO ALTERNATES
JUMPF E$NON ;NO OPERATORS AT NODE AND RETURN
SENO.3: PJRST E$SCC ;Send command complete and return
SUBTTL BLDSND Build the SEND text
; Here to build the SEND text for all types of sends except TOPS-10
; SEND ALL commands.
;
TOPS20 <BLDALL:> ;TOPS-20 only
BLDSND: $CALL BLDINI ;SETUP FOR BUILDING SEND TEXT STRING
$RETIF ;PROPAGATE ERROR BACK TO CALLER
$TEXT (BLDRTN,<^M^J^C/G$NOW/ From operator ^I/(S2)/:
=^7/[76]/^T/1(S1)/
^0>)
JRST BLDFIN ;FINISH UP
NODTXT: ITEXT (<^N/NOD.NM(T1)/>)
TTYTXT: ITEXT (<terminal ^O/OPR.TN(T2)/>)
SUBTTL BLDALL Build the TOPS-10 SEND ALL text
TOPS10 < ;TOPS-10 only
; Here to build the SEND text for TOPS-10 SEND ALL commands.
;
BLDALL: $CALL BLDINI ;Setup text pointers
$RETIF ;Propagate error back to caller
$TEXT (BLDRTN,<^T/1(S1)/>) ;Store the string
$RETT ;Go finish up
>;END of TOPS-10 conditional
; Setup building of the SEND text string
;
BLDINI: $CALL P$TEXT ;GET THE TEXT
$RETIF ;NO TEXT..RETURN
HRLI T1,(POINT 7,0) ;SETUP BYTE POINTER
HRRI T1,ARG.DA(P3) ;ADDRESS FOR THE TEXT
MOVEM T1,SNDPTR ;SAVE THE SEND BYTE POINTER
MOVE T2,G$OPRA ;GET OPR ADDRESS
MOVE T1,OPR.ND(T2) ;GET NODE ADDRESS
MOVE T3,G$HOST ;GET NODE OF CENTRAL SITE
MOVEI S2,TTYTXT ;ASSUME TTYTXT
CAME T3,NOD.NM(T1) ;CENTRAL SITE
MOVEI S2,NODTXT ;NO..USE NODE TEXT
$RETT ;RETURN
; Here to finish up the building of SEND text strings
;
BLDFIN: HRRZ S2,SNDPTR ;GET THE ADDRESS
AOS S1,S2 ;BUMP AND SAVE IN S1
SUB S2,P3 ;COMPUTE THE BLOCK SIZE
MOVEI S1,.CMTXT ;GET BLOCK TYPE
MOVE T4,P3 ;GET TEXT ADDRESS
$CALL ARGRTN ;SAVE THE ARGUMENT
ANDI P3,777 ;GET THE MESSAGE LENGTH
STORE P3,.MSTYP(MO),MS.CNT ;SAVE THE MESSAGE COUNT
MOVE S1,T4 ;GET TEXT ADDRESS
$RETT ;RETURN TRUE
BLDRTN: IDPB S1,SNDPTR ;SAVE THE BYTE
$RETT ;RETURN TRUE
SUBTTL SNDALX Send message to all terminals
; TOPS-10 SEND ALL command support
;
TOPS10 < ;TOPS-10 only
SNDALX: MOVE S1,[POINT 7,SNDTXT] ;Byte pointer to store SEND ALL text
MOVEM S1,STRBP ;Store it
MOVEI S1,^D72 ;# characters maximum
MOVEM S1,STRCT ;Store byte count
MOVEI T1,[ITEXT (<^O/P1/_>)] ;Assume node number
TLNE P1,770000 ;Is it?
MOVEI T1,[ITEXT(<^W/P1/_>)] ;No - a node name
CAMN P1,[-1] ;Was it ALL?
MOVEI T1,[ITEXT (<ALL:>)] ;Yes - message to all nodes
$TEXT (SNDCHR,<SEND ^I/@T1/^T/ARG.DA(P3)/^M^A>) ;Monitor SEND command
MOVX S1,.TOTYP ;TRMOP. to stuff text down TTY's throat
MOVE S2,FRCLIN ;Send text to FRCLIN
MOVEI S2+1,SNDTXT ;Point to text
MOVX TF,<3,,S1> ;Set up for CALLI
TRMOP. TF, ;Do SEND ALL command
$RETF ;Can't
$RETT ;Return sucessful
SNDCHR: SOSG STRCT ;Count bytes
MOVX S1,.CHCRT ;Load a carriage return to end buffer
IDPB S1,STRBP ;Store character
CAXE S1,.CHCRT ;End of line ?
$RETT ;No - return
MOVX S1,.CHNUL ;Get a <NUL>
IDPB S1,STRBP ;Make sure text is properly terminated
$RETF ;Stop $TEXT
>;END of TOPS-10 conditional
; TOPS-20 SEND ALL command support
;
TOPS20 < ;TOPS-20 only
SNDALX: HRROI S2,ARG.DA(S1) ;This gets the text as remembered
; from BLDFIN
SETOM S1 ;SEND TO ALL TERMINALS
TTMSG ;SEND THE TEXT
ERJMP .RETF ;FAILED RETURN FALSE
$RETT ;RETURN TRUE
>;END of TOPS-20 conditional
SUBTTL SNDTTY Send a message to a terminal
;THIS ROUTINE WILL SEND A MESSAGE TO A TERMINAL
;
;CALL S1/ TERMINAL NUMBER
; S2/ ADDRESS OF TEXT
;CHECK IF TERMINAL WANTS MESSAGES
SNDTTY:
TOPS10< $CALL .SAVET ;SAVE AC'S
TXO S1,.UXTRM ;MAKE SURE IT IS A UDX
MOVX T1,<3,,T2> ;SET UP ARG POINTER
MOVX T2,.TODSP ;LOAD OUTSTR FUNCION
MOVE T3,S1 ;GET TERMINAL NUMBER
MOVE T4,S2 ;GET MESSAGE ADDRESS
TRMOP. T1, ;OUTPUT THE STRING
PJRST E$CSU ;GIVE AN ERROR
$RETT ;RETURN TRUE
>;END TOPS10
TOPS20< TRO S1,400000 ;FLAG IT AS A TERMINAL NUMBER
HRRO S2,S2 ;POINT AT THE TEXT
TTMSG ;SEND THE TEXT
ERJMP .RETF ;FAILED ..RETURN FALSE
$RETT ;RETURN TRUE
>;END TOPS20
SUBTTL SHOW SHOW Command
SHOW: $CALL P$KEYW ;GET A KEYWORD
$RETIF ;MUST BE A KEYWORD..ELSE RETURN
MOVSI S2,-SHWLEN ;MAKE AOBJN POINTER TO DISPATCH TABLE
SHOW.1: HLRZ T1,SHWDSP(S2) ;GET AN ENTRY FROM TABLE
CAMN T1,S1 ;DOES THIS ENTRY MATCH?
JRST SHOW.2 ;YES, GO PROCESS IT
AOBJN S2,SHOW.1 ;NO, LOOK AT NEXT
$RETF ;NO MATCH, BAD COMMAND
SHOW.2: HRRZ S2,SHWDSP(S2) ;GET THE ADDRESS TO DISPATCH TO
JRST (S2) ;EXECUTE THE ROUTINE
SHWDSP:
.KYSTS,,Q$SHWS## ;SHOW STATUS
.KYMSG,,SHWMSG ;SHOW MESSAGES
.KYQUE,,Q$SHWQ## ;SHOW QUEUES
.KYPRM,,Q$SHWP## ;SHOW PARAMETERS
.KYOPR,,SHWOPR ;SHOW OPERATORS
.KYRTE,,Q$SHWR## ;SHOW ROUTE TABLES
.KYCTL,,Q$SHWC## ;SHOW CONTROL-FILE
TOPS20< .KYSCH,,SHWSCH > ;SHOW SCHEDULER
TOPS10< .KYSLS,,Q$SLST## > ;SHOW SYSTEM LISTS
TOPS10< .KYALC,,Q$SALC## > ;SHOW ALLOCATION
SHWLEN==.-SHWDSP
SUBTTL SHWOPR Show operators command
;THIS ROUTINE WILL DISPLAY OPR ON SYSTEM TO OPR ISSUING THE COMMAND
SHWOPR: MOVX S1,.OMDSP ;SETUP OPR DISPLAY MESSAGE
STORE S1,.MSTYP(MO),MS.TYP ;SAVE THE TYPE COUNT
$CALL P$SWIT ;CHECK FOR A SWITCH
JUMPF SHWO.1 ;MUST BE CRLF
CAIE S1,.SWNOD ;WAS IT A NODE
$RETF
$CALL P$NODE ;GET THE NODE VALUE
$RETIF ;INVALID MESSAGE
MOVEM S1,G$ARG1 ;SAVE NODE NAME
$CALL FNDNOD ;VALIDATE THE NODE
JUMPF E$NON ;NO SUCH NODE
MOVE P1,S1 ;SAVE THE NODE ADDRESS
MOVEI S1,SHOT.1 ;SHOW OPERATOR TEXT
$CALL SHWMTX ;SHOW MESSAGE TEXT POINTER
MOVE S2,P1 ;PUT NODE ADDRESS IN S2
$CALL OPRLST ;OPERATORS AT NODE
JUMPT FINSHW ;HAVE SOME..SEND IT
PJRST E$NON ;NO MESSAGES FOR THE NODE
SHWO.1: MOVEI S1,SHOT.1 ;SHOW OPERATOR TEXT
$CALL SHWMTX ;SHOW MESSAGE TEXT
SETZM P1 ;CLEAR MESSAGES FLAG
MOVE S1,G$NODL ;GET NODE LIST NUMBER
$CALL L%FIRST ;GET FIRST ENTRY
JUMPF E$NOD ;No operators defined
SHWO.2: $CALL OPRLST ;OPERATORS AT NODE
SKIPF ;NO MESSAGES SKIP FLAG SETTING
SETOM P1 ;MESSAGES FOUND
MOVE S1,G$NODL ;GET NODE LIST NUMER
$CALL L%NEXT ;GET NEXT ENTRY
JUMPT SHWO.2 ;PROCESS MESSAGES
SKIPE P1 ;SEND ANY MESSAGES
JRST FINSHW ;YES..SEND MESSAGE
PJRST E$NOD ;NO OPERATORS DEFINED
SHWMTX: MOVE T1,G$NOW ;GET CURRENT TIME
MOVEM T1,ARG.DA(S1) ;SAVE TIME IN THE BLOCK
MOVS T1,S1 ;SOURCE TEXT ADDRESS
HRR T1,P3 ;DESTINATION ADDRESS
LOAD T2,(S1),AR.LEN ;LENGTH OF THE BLOCK
ADD P3,T2 ;GET END ADDRESS
BLT T1,-1(P3) ;MOVE THE TEXT
AOS .OARGC(MO) ;BUMP ARGUMENT COUNT
$RETT ;RETURN
SHMT.1: XWD SHLTXT,.ORDSP ;TEXT BLOCK
BLOCK 1 ;ROOM FOR TIME STAMP
ASCIZ/ -- System messages outstanding --
/
SHLTXT==.-SHMT.1 ;SIZE OF THE BLOCK
SHOT.1: XWD SHOTLN,.ORDSP ;TEXT BLOCK
BLOCK 1 ;ROOM FOR TIME STAMP
ASCIZ/ -- Operators --
Node Type Terminal Job User
----------- ------ -------- --- ----------------------------
/
SHOTLN=.-SHOT.1 ;SIZE OF THE BLOCK
SUBTTL SHWSCH Show scheduler information
;THIS COMMAND IS TO DUMP THE SCHEDULER INFORMATION ON THE -20
TOPS20<
SHWSCH: $CALL P$CFM ;END OF COMMAND?
$RETIF ;ERROR..RETURN
$CALL RELPAG ;RELEASE GIVEN PAGE
$CALL OPRMES ;SETUP THE MESSAGE
MOVEI S1,.SKRBC ;READ BIAS CONTROL
MOVEI S2,T1 ;BLOCK IN T1
MOVEI T1,2 ;LENGTH OF BLOCK
SKED% ;GET THE DATA
ERJMP SCHERR ;SCHEDULER ERROR
MOVE P1,T2 ;SAVE THE VALUE
MOVEI S1,.SKRCV ;GET SCHEDULER DATA
SKED% ;GET THE VALUE
ERJMP SCHERR ;SCHEDULER ERROR
MOVE P2,T2 ;SAVE SCHEDULER INFO
MOVEI S1,[ASCIZ/on/] ;ASSUME ON
TXNE P2,SK%STP ;CHECK IF OFF
MOVEI S1,[ASCIZ/off/] ;YES..
$TEXT (WTORTN,< -- System scheduler information --
Class scheduler: ^T/(S1)/ Bias control: ^D/P1/>)
MOVEI P1,[ITEXT(<none set>)] ;ASSUME NONE-SET
TXNE P2,SK%DRG ;BATCH ON DREGS QUEUE?
MOVEI P1,[ITEXT(<background>)] ;YES.. SETUP BACKGROUND
TXNE P2,SK%STP ;CHECK IF ON
JRST SCHS.1 ;NO..BYPASS CLASS SCHEDULER BATCH READ
MOVEI S1,.SKBCR ;READ BATCH CLASS SETTINGS
MOVEI S2,T1 ;ADDRESS OF THE BLOCK
MOVEI T1,2 ;LENGTH OF THE BLOCK
SKED% ;GET THE VALUE
ERJMP SCHERR ;ERROR..RETURN
SKIPL T2 ;ANY SET(-1=NONE)
MOVEI P1,[ITEXT(<^D/T2/>)] ;GET THE NUMBER
SCHS.1: $TEXT (WTORTN,< Batch class: ^I/(P1)/>)
TXNE P2,SK%STP ;CLASS SCHEDULER ON
JRST SCHS.4 ;NO..FINISH OFF COMMAND
MOVEI T3,0 ;START WITH CLASS 0
$TEXT (WTORTN,<
------Load averages-------
CLASS SHARE(%) USE(%) 1-MIN 5-MIN 15-MIN>)
SCHS.2: MOVEI S1,.SKRCS ;READ CLASS INFORMATION
MOVEI S2,SCHBLK ;SCHEDULER BLOCK
MOVEI T1,7 ;LENGTH OF BLOCK
MOVEM T1,SCHBLK+.SACNT ;SAVE THE LENGTH
MOVEM T3,SCHBLK+.SACLS ;SAVE THE CLASS
SKED% ;GET THE DATA
ERJMP SCHS.3 ;NO MORE..DONE NOW
SKIPN T4,SCHBLK+.SASHR ;ANY SHARE?
AOJA T3,SCHS.2 ;NO..TRY NEXT ONE
MOVE S1,.SASHR+SCHBLK ;GET THE SHARE
FMPRI S1,(100.) ;GET WHOLE NUMBER
FIXR S1,S1 ;GET INTERGER NUMBER
MOVEM S1,.SASHR+SCHBLK ;SAVE THE NUMBER
MOVE S1,.SAUSE+SCHBLK ;GET THE USE
FMPRI S1,(100.) ;MAKE A WHOLE NUMBER
FIXR S1,S1 ;MAKE INTERGER NUMBER
MOVEM S1,.SAUSE+SCHBLK ;SAVE THE NUMBER
MOVE S1,.SA1ML+SCHBLK ;GET THE 1 MINUTE LOAD
FMPRI S1,(100.) ;GET WHOLE NUMBER
FIXR S1,S1 ;GET INTERGER NUMBER
IDIVI S1,^D100 ;NOW GET NUMBER AND FRACTION
HRL S2,S1 ;PLACE IN LEFT HALF
MOVEM S2,.SA1ML+SCHBLK ;SAVE NUMBERS BACK
MOVE S1,.SA5ML+SCHBLK ;GET THE 5 MINUTE LOAD
FMPRI S1,(100.) ;GET WHOLE NUMBER
FIXR S1,S1 ;GET INTERGER NUMBER
IDIVI S1,^D100 ;NOW GET NUMBER AND FRACTION
HRL S2,S1 ;PLACE IN LEFT HALF
MOVEM S2,.SA5ML+SCHBLK ;SAVE NUMBERS BACK
MOVE S1,.SA15L+SCHBLK ;GET THE 15 MINUTE LOAD
FMPRI S1,(100.) ;GET WHOLE NUMBER
FIXR S1,S1 ;GET INTERGER NUMBER
IDIVI S1,^D100 ;NOW GET NUMBER AND FRACTION
HRL S2,S1 ;PLACE IN LEFT HALF
MOVEM S2,.SA15L+SCHBLK ;SAVE NUMBERS BACK
$TEXT (WTORTN,< ^D/SCHBLK+.SACLS/ ^D3R/SCHBLK+.SASHR/ ^D3R/SCHBLK+.SAUSE/ ^D3R/SCHBLK+.SA1ML,LHMASK/.^D2R0/SCHBLK+.SA1ML,RHMASK/ ^D3R/SCHBLK+.SA5ML,LHMASK/.^D2R0/SCHBLK+.SA5ML,RHMASK/ ^D3R/SCHBLK+.SA15L,LHMASK/.^D2R0/SCHBLK+.SA15L,RHMASK/>)
AOJA T3,SCHS.2 ;NO..TRY NEXT ONE
SCHS.3: MOVEI S1,[ASCIZ/allocated/] ;DEFAULT FOR WINDFALL
MOVEI S2,[ASCIZ/policy program/];DEFAULT FOR CLASS ASSIGNMENTS
TXNE P2,SK%WDF ;WITHHOLD WINDFALL?
MOVEI S1,[ASCIZ/withheld/] ;YES
TXNE P2,SK%ACT ;CLASS BY ACCOUNTS
MOVEI S2,[ASCIZ/account/] ;YES
$TEXT (WTORTN,<
Windfall: ^T/(S1)/ Classes by ^T/(S2)/>)
SCHS.4: $CALL MSGFIN ;FINISH THE MESSAGE
$CALL L$SHWM## ;LOG THE MESSAGE
MOVE S1,G$SND ;GET SENDERS PID
MOVEI S2,PAGSIZ ;PAGE MESSAGE
$CALL SPDOPR ;SEND TO OPR
$RETT ;RETURN O.K.
SCHERR: PJRST E$SFF ;SCHEDULER FUNCTION FAILED
>;END TOPS20
SUBTTL SHWMSG Show messages command
;THIS ROUTINE WILL BUILD A MESSAGE FOR OPR WITH OUTSTANDING
;WTOR MESSAGES
SHWMSG: MOVX S1,.OMDSP ;SETUP OPR DISPLAY MESSAGE
STORE S1,.MSTYP(MO),MS.TYP ;SAVE THE TYPE COUNT
$CALL P$SWIT ;CHECK FOR A SWITCH
JUMPF SHWM.2 ;NO..TRY FOR A NUMBER
CAIE S1,.SWNOD ;WAS IT A NODE
$RETF
$CALL P$NODE ;GET THE NODE VALUE
$RETIF ;INVALID MESSAGE
MOVEM S1,G$ARG1 ;SAVE NODE NAME
$CALL FNDNOD ;VALIDATE THE NODE
JUMPF E$NMN ;NO SUCH NODE
MOVE P1,S1 ;SAVE THE NODE ADDRESS
MOVE S1,NOD.NM(S1) ;GET THE NODE NAME
$CALL OPRENB ;CHECK IF ENABLED FOR NODE
$RETIF ;INVALID NODE
MOVEI S1,SHMT.1 ;SHOW MESSAGE TEXT
$CALL SHWMTX ;SHOW MESSAGE TEXT POINTER
MOVE S2,P1 ;PUT NODE ADDRESS IN S2
$CALL MSGNOD ;OUTPUT THE MESSAGES
JUMPT FINSHW ;HAVE SOME..SEND IT
PJRST E$NMN ;NO MESSAGES FOR THE NODE
SHWM.2: $CALL P$NUM ;GET A NUMBER
JUMPF SHWM.3 ;MUST BE CRLF
MOVEM S1,G$ARG1 ;SAVE THE MESSAGE NUMBER
$CALL GETMSG ;GET THE MESSAGE
JUMPF E$NSM ;NO SUCH MESSAGE
MOVEI S1,SHMT.1 ;SHOW MESSAGE TEXT
$CALL SHWMTX ;SHOW MESSAGE TEXT
$CALL BLDDPY ;MOVE THE MESSAGE
JRST FINSHW ;FINISH OFF THE MESSAGE
;Here if just SHOW MESSAGES <cr>
;If system OPR, show all messages, otherwise, just messages
; for this OPRs node
SHWM.3: MOVEI S1,SHMT.1 ;SHOW MESSAGE TEXT
$CALL SHWMTX ;SHOW MESSAGE TEXT
MOVE S1,G$OPRA ;GET THE OPR ADDRESS
MOVE S2,OPR.ND(S1) ;GET THE NODE ADDRESS
MOVE S2,NOD.NM(S2) ;GET THE NAME
MOVEM S2,G$ARG1 ;SAVE THE VALUE
$CALL O$SYSTEM ;IS THIS A SYSTEM OPR?
JUMPF SHWM.5 ;NO ..DO JUST THIS NODE
SETZM P1 ;CLEAR MESSAGES FLAG
MOVE S1,G$NODL ;GET NODE LIST NUMBER
$CALL L%FIRST ;GET FIRST ENTRY
JUMPF E$NOM ;STRANGE, NO NODES!
SHWM.4: $CALL MSGNOD ;GET MESSAGES FOR THIS NODE
SKIPF ;NO MESSAGES SKIP FLAG SETTING
SETOM P1 ;MESSAGES FOUND
MOVE S1,G$NODL ;GET NODE LIST NUMER
$CALL L%NEXT ;GET NEXT ENTRY
JUMPT SHWM.4 ;PROCESS MESSAGES
SKIPE P1 ;SEND ANY MESSAGES
JRST FINSHW ;YES..SEND MESSAGE
PJRST E$NOM ;NO OUTSTANDING MESSAGES
;Here for a non-system OPR
SHWM.5: MOVE S2,OPR.ND(S1) ;GET THE OPR DATA BASE ENTRY
$CALL MSGNOD ;OUTPUT THE MESSAGES
JUMPT FINSHW ;FINISH OFF THE MESSAGE
PJRST E$NMN ;NO MESSAGES FOR NODE
SUBTTL FINSHW Finish a SHOW message
;This Routine will finish off a SHOW OPERATOR or SHOW MESSAGES
;command and LOG it.
FINSHW: $CALL P$CFM ;END OF MESSAGE
$RETIF ;ERROR..RETURN
FINS.1: ANDI P3,777 ;GET MESSAGE LENGTH
STORE P3,.MSTYP(MO),MS.CNT ;SAVE LENGTH IN MESSAGE
$SAVE <T1,T2> ;WE KNOW L$SHWM SMASHES THESE
$CALL L$SHWM## ;LOG THE SHOW MESSAGE
MOVE S1,G$SND ;GET THE SENDERS PID
MOVEI S2,PAGSIZ ;SEND A PAGE
$CALL SPDOPR ;SEND THE MESSAGE
$RETT ;RETURN TRUE
SUBTTL MSGNOD Routine to Build Display Blocks for a Node
;CALLED WITH S2 CONTAINING THE ADDRESS OF AN ENTRY IN THE NODE LIST
;MO MUST POINT AT A OPERATOR DISPLAY MESSAGE
MSGNOD: LOAD S1,NOD.ML(S2) ;GET THIS NODE'S MESSAGE LIST NUMBER
MOVE T1,S1 ;SAVE MESSAGE LIST NUMBER
$CALL L%FIRST ;FIND THE FIRST MESSAGE
$RETIF ;NONE FOR THIS NODE,RETURN
MSGN.1: $CALL BLDDPY ;GO BUILD A DISPLAY BLOCK
MSGN.2: MOVE S1,T1 ;COPY MESSAGE LIST NUMBER TO S1
$CALL L%NEXT ;FIND NEXT ENTRY
JUMPT MSGN.1 ;LOOP FOR ALL MESSAGES
$RETT ;LOOP IF NO MORE
SUBTTL BLKDPY Build message into output
;THIS ROUTINE WILL MOVE TEXT BLOCK FROM MESSAGE LIST TO OUTPUT MESSAGE MO
;CALLED WITH: S2 ADDRESS OF MESSAGE ENTRY
BLDDPY: MOVSI T3,MSL.SZ(S2) ;ADDRESS OF MESSAGE TEXT
HRR T3,P3 ;FIRST FREE OUTPUT ADDRESS
LOAD T4,MSL.SZ(S2),AR.LEN ;LENGTH OF THE BLOCK
ADD P3,T4 ;COMPUTE ENDING ADDRESS
CAIL P3,777(MO) ;MAKE SURE WILL FIT IN MESSAGE
PJRST BLDD.1 ;NO..SEND AND CONTINUE ON
BLT T3,-1(P3) ;MOVE THE BLOCK
AOS .OARGC(MO) ;CLEAR THE ARGUMENT COUNT
$RETT ;RETURN TRUE
BLDD.1: PUSH P,S2 ;SAVE MESSAGE ADDRESS
MOVX S1,WT.MOR ;SET MORE COMING FLAG
IORM S1,.OFLAG(MO) ;TURN ON THE FLAG
$CALL FINS.1 ;SEND THE MESSAGE
$CALL GETPAG ;GET A PAGE FOR OUTPUT
MOVX S1,.OMDSP ;SETUP DISPLAY MESSAGE
STORE S1,.MSTYP(MO),MS.TYP ;SAVE THE TYPE
MOVEI P3,.OHDRS(MO) ;GET FIRST FREE ADDRESS
POP P,S2 ;RESTORE S2
JRST BLDDPY ;TRY THIS ONE AGAIN
SUBTTL GETMSG Get a message given the number
;THIS ROUTINE WILL BE CALLED WITH THE MESSAGE NUMBER IN S1
;AND RETURN TRUE WITH MESSAGE ENTRY ADDRESS IN S2
GETMSG: MOVE S2,G$OPRA ;GET THE OPR ENTRY ADDRESS
MOVE S2,OPR.ND(S2) ;GET NODE ENTRY ADDRESS
MOVEI T1,MSL.ID ;GET MESSAGE ID
HRRM T1,FNDXCT ;SAVE FOR COMPARE
$CALL CHKMSG ;CHECK FOR MESSAGE..THIS NODE
$RETIT ;O.K. FOUND..SEND ANSWER
MOVE S1,G$OPRA ;GET OPR ADDRESS
$CALL O$SYSTEM ;SYSTEM OPR?
$RETIF ;Return on failure
MOVE S2,OPR.ND(S1) ;GET NODE ENTRY
MOVE S1,P1 ;GET NUMBER OF ANSWER
MOVEI T1,MSL.ID ;GET MESSAGE ID
HRRM T1,FNDXCT ;SAVE FOR COMPARE
PJRST FNDMSG ;CHECK FOR MESSAGE AND RETURN
SUBTTL FNDMSG Find a message for node
;THIS ROUTINE WILL SEARCH ALL NODES AND CHECK FOR MESSAGE
;
;CALL S1/ MESSAGE NUMBER
;
;RETURN TRUE S2/ ADDRESS OF MESSAGE ENTRY
FNDMSG: $CALL .SAVE2 ;SAVE P1 AND P2
MOVE P1,S1 ;RELOCATE SEQUENCE NUMBER
FNDM.1: MOVE S1,G$NODL ;GET NODE LIST NUMBER
$CALL L%FIRST ;FIND THE FIRST ONE
$RETIF ;EMPTY NODE LIST
FNDM.2: MOVE S1,P1 ;MESSAGE TO SEARCH FOR
$CALL CHKM.1 ;CHECK NODE FOR MESSAGE
JUMPT FNDM.3 ;FOUND ..RETURN
MOVE S1,G$NODL ;GET NODE LIST NUMBER AGAIN
$CALL L%NEXT ;LOOK FOR THE NEXT NODE
JUMPT FNDM.2 ;LOOP
$RETF ;FAILURE
FNDM.3: MOVE P1,S2 ;SAVE THE ENTRY
MOVE S1,G$NODL ;GET NODE LIST NUMBER
$CALL L%RENT ;REMEMBER THE ENTRY
$RETIF ;Can't remember???
MOVE S2,P1 ;RESTORE MESSAGE ADDRESS
$RETT ;RETURN TRUE
SUBTTL CHKMSG Search node for a message
;THIS ROUTINE WILL CHECK FOR THE MESSAGE AT A NODE
;
;CALL S1/ MESSAGE NUMBER
; S2/ NODE ADDRESS
;
;RETURN TRUE: S2/ MESSAGE ADDRESS
CHKMSG: $CALL .SAVE2 ;SAVE P1 AND P2
CHKM.1: DMOVE P1,S1 ;SAVE THE MESSAGE ID AND NODE ADDRESS
LOAD S1,NOD.ML(P2) ;GET THE MESSAGE LIST NUMBER
$CALL L%FIRST ;FIND THE FIRST MESSAGE
$RETIF ;RETURN..IF NONE THERE
CHKM.2: XCT FNDXCT ;EXECUTE THE MATCH
JRST CHKM.4 ;SAVE THE ENTRY
CHKM.3: MOVE S1,NOD.ML(P2) ;GET MESSAGE LIST NUMBER AGAIN
$CALL L%NEXT ;FIND NEXT MESSAGE IN THE LIST
JUMPT CHKM.2 ;CHECK THIS ENTRY
$RETF ;NO..RETURN FALSE
CHKM.4: HRRZ S1,FNDXCT ;GET THE COMPARE TYPE
CAIE S1,MSL.CD ;WAS IT THE CODE
JRST CHKM.5 ;IGNORE NEXT CHECK
MOVE S1,G$SND ;GET SENDERS PID
CAME S1,MSL.PD(S2) ;IS IT SAME PID
JRST CHKM.3 ;NO..GET NEXT ENTRY
CHKM.5: MOVE P1,S2 ;SAVE THE MESSAGE ADDRESS
MOVE S1,NOD.ML(P2) ;GET MESSAGE LIST NUMBER
$CALL L%RENT ;REMEMBER THIS ENTRY
$RETIF ;Can't remember???
MOVE S2,P1 ;RESTORE MESSAGE ADDRESS
$RETT ;RETURN TRUE
SUBTTL NXTMSG Get the next message
;THIS ROUTINE WILL GET NEXT MESSAGE AFTER FNDMSG HAS FOUND ONE
;
; S1/ MESSAGE NUMBER OR ID
NXTMSG: $CALL .SAVE2 ;SAVE P1 AND P2
MOVE P1,S1 ;SAVE MESSAGE ID
MOVE S1,G$NODL ;GET NODE LIST
$CALL L%PREM ;GET REMEMBERED ENTRY
JUMPF FNDM.1 ;SEARCH THE LIST
MOVE P2,S2 ;SAVE NODE ADDRESS
MOVE S1,NOD.ML(P2) ;GET MESSAGE LIST ADDRESS
$CALL L%PREM ;GET REMEMBERED ENTRY
JUMPF NXTM.1 ;NONE SET..CHECK ALL MESSAGES AT NODE
$STOP(REI,<Remembered entry ^O/S2/ in list ^D/S1/ invalid>)
NXTM.1: MOVE S2,P2 ;GET NODE ADDRESS
JRST FNDM.2 ;PROCESS MESSAGE NOW
SUBTTL REPORT Log messages in SYSERR file
;THIS COMMAND WILL LOG THE ENTRY TO SYSERR
;NEEDED SYMBOLS
SLMTTY==0 ;JOB#,,TTY#
SLMPPN==1 ;PPN OR POINTER TO BLOCK
SLMWHO==2 ;REPORTED BY FIELD
SLMDEV==3 ;DEVICE TO REPORT
SLMMSG==4 ;POINTER TO REASON
ER.SLM==16 ;TOPS-10 ERROR TYPE
SEC%SL==116 ;TOPS-20 ERROR TYPE
SYSCOD==777000,,0 ;MASK FOR STORING CODE ON -20
REPORT: MOVE S1,G$OPRA ;Get OPR address
MOVE S1,OPR.ND(S1) ;Get Node address
MOVE S1,NOD.NM(S1) ;Get Node name
$CALL OPRENB ;Must have remote privs
$RETIF
MOVEI P1,.OARGC(MO) ;GET POINTER TO DATA AREA
$CALL P$SIXF ;GET THE REPORTER NAME
$RETIF ;NOT THERE..ERROR
MOVEM S1,SLMWHO(P1) ;SAVE THE ID
$CALL P$DEV ;GET THE DEVICE NAME
$RETIF ;ERROR..RETURN
HRROI S1,ARG.DA(S1) ;Setup pointer to device name
$CALL S%SIXB ;convert device name to sixbit
MOVEM S2,SLMDEV(P1) ;SAVE DEVICE NAME
LOAD S1,G$JOB ;GET JOB NUMBER
HRLM S1,SLMTTY(P1) ;SAVE JOB NUMBER
$CALL GETJOB ;GET JOB INFO OF SENDER
MOVE S1,JOBTTY ;GET TERMINAL NUMBER
HRRM S1,SLMTTY(P1) ;SAVE TERMINAL NUMBER
TOPS10<
REPO.1: SKIPN S1,G$SID ;GET SENDERS ID
PJRST E$IUM ;INVALID USER IN MESSAGE
MOVEM S1,SLMPPN(P1) ;SAVE THE PPN
MOVEI P2,SLMMSG+1 ;OFFSET FOR TEXT START
>;END TOPS10
TOPS20<
REPO.1: MOVE S2,G$SID ;GET SENDERS ID
HRROI S1,SLMMSG+1 ;GET PLACE TO STORE IT
MOVEM S1,SLMPPN(P1) ;SAVE THE POINTER
ADDI S1,(P1) ;ADD IN ACTUAL DISPLACEMENT
DIRST ;MAKE A STRING FROM NUMBER
JRST E$IUM ;INVALID USER IN MESSAGE
IBP S1 ;INCREMENT THE BYTE POINTER
HRRZ P2,S1 ;GET LAST ADDRESS
ADDI P2,1 ;POINT TO NEXT FREE LOCATION
SUB P2,P1 ;GET RELATIVE OFFSET
>;END TOPS20
$CALL P$TEXT ;GET THE EXPLANATION
$RETIF ;ERROR..RETURN
SUBI S2,1 ;DECREMNT COUNT BY HEADER SIZE
MOVN T1,S2 ;GET SIZE OF BLOCK
MOVS T2,T1 ;PLACE COUNT IN LEFT HALF
HRR T2,P2 ;GET ADDRESS FOR DATA
MOVEM T2,SLMMSG(P1) ;SAVE POINTER IN BLOCK
MOVEI S2,ARG.DA(S1) ;GET ADDRESS OF TEXT
MOVE S1,P2 ;GET ADDRESS OF DESTINATION
ADD S1,P1 ;GET ACTUAL LOCATION
$CALL TXTMOV ;MOVE THE TEXT
HRRZ S1,S1 ;GET ENDING ADDRESS
TOPS10<
REPO.2: SUBI S1,-1(P1) ;GET THE LENGTH
ADDI S1,2 ;SIZE OF HEADER
MOVE T1,S1 ;SAVE LENGTH IN T1
MOVX S1,ER.SLM ;GET TYPE OF SYERR ENTRY
STORE S1,.OFLAG(MO) ;SAVE IN MESSAGE
MOVX S1,.DMERR ;DAEMON FUNCTION CODE
STORE S1,.MSCOD(MO) ;SAVE IN MESSAGE
MOVS T2,T1 ;PLACE LENGTH IN LEFT HALF
HRRI T2,.MSCOD(MO) ;GET STARTING ADDRESS
DAEMON T2, ;DO THE FUNCTION
PJRST E$SUF ;SYSERR UPDATE FAILED
>;END TOPS10
TOPS20<
REPO.2: SUBI S1,-1(P1) ;GET THE LENGTH
ADDI S1,4 ;ADD 4 WORD HEADER
MOVE T1,S1 ;SAVE THE LENGTH
MOVX S1,SEC%SL ;GET FUNCTION CODE
STORE S1,.MSTYP(MO),SYSCOD ;SAVE THE CODE
MOVEI S1,.MSTYP(MO) ;START OF FUNCTION
MOVE S2,T1 ;LENGTH OF THE BLOCK
SYERR ;DO THE SYSERR UPDATE
ERJMP E$SUF ;SYSERR UPDATE FAILED
>;END TOPS20
PJRST E$SEM ;SYSERR ENTRY MADE
SUBTTL CHKWTO Routine to check for outstanding WTORS for all nodes
;This routine is a TIMER event and as such will be called from I%SLP
;when any WTOR's are outstanding
CHKWTO: SETZM G$CHKM ;Clear request flag
MOVE S1,G$NODL ;Get the node list
$CALL L%FIRST ;Get the first node
JUMPF E$NOM ;Strange..
CHKWT0: MOVE T2,NOD.NM(S2) ;Get the node name
MOVE S1,NOD.ML(S2) ;Point to the message list
$CALL L%FIRST ;Any messages?
JUMPF CHKWT2 ;No..try the next
SKIPT G$OPR ;Yes..OPR around to see it?
JRST CHKWT3 ;No..dont bother outputing
MOVEI T1,0 ;Yes..init the count
CHKWT1: $CALL L%NEXT ;Count the messages
ADDI T1,1 ;Bump the count
JUMPT CHKWT1 ;Loop back
$WTO(<^D/T1/ outstanding message(s)^T/WTBELL/>,,,<$WTNOD(T2),$WTFLG(WT.SJI)>)
CHKWT3: SETOM G$CHKM ;Request another check
CHKWT2: MOVE S1,G$NODL
$CALL L%NEXT ;Check the next node
JUMPT CHKWT0
SKIPN G$CHKM ;Want another check?
$RETT ;No..just return
REQMSC: MOVX S1,<^D5*^D60*^D1000> ;Wait 5 minutes
MOVEI S2,CHKWTO ;Same routine
$CALL REQTIM ;Make the request
SETOM G$CHKM ;Remember we made it
$RETT
WTBELL: BYTE (7) .CHBEL,.CHBEL,.CHBEL
SUBTTL OPRLST Routine to Build Display Blocks for an Operator
;CALLED WITH S2 CONTAINING THE ADDRESS OF AN ENTRY IN THE NODE LIST
;MO MUST POINT AT A OPERATOR DISPLAY MESSAGE
OPRLST: $CALL OPRSPT ;OPR SETUP POINTERS
LOAD S1,NOD.OP(S2) ;GET THE OPERATOR LIST NUMBER
MOVE T1,S1 ;SAVE OPERATOR LIST NUMBER
$CALL L%FIRST ;FIND THE FIRST MESSAGE
$RETIF ;NONE FOR THIS NODE,RETURN
OPRL.1: MOVE S1,OPR.ND(S2) ;GET NODE ENTRY ADDRESS
$CALL OPRDPY ;GO BUILD A DISPLAY BLOCK
OPRL.2: MOVE S1,T1 ;COPY MESSAGE LIST NUMBER TO S1
$CALL L%NEXT ;FIND NEXT ENTRY
JUMPT OPRL.1 ;LOOP FOR ALL MESSAGES
HRRZ S2,WTOPTR ;GET LAST ADDRESS
SUBI S2,-1(P3) ;GET THE LENGTH
MOVEI S1,.CMTXT ;GET ARGUMENT TYPE
$CALL ARGRTN ;SAVE THE ARGUMENT
$RETT ;LOOP IF NO MORE
SUBTTL OPRDPY Build Operator Info
;THIS ROUTINE WILL PLACE TEXT IN THE MESSAGE
;CALLED WITH: S1 NODE ENTRY ADDRESS
; S2 ADDRESS OF OPERATOR ENTRY
OPRDPY: $SAVE <P1,P2>
DMOVE P1,S1 ;SAVE THE NODE AND OPR ADRSSES
MOVE S1,OPR.FL(S2) ;GET OPERATOR FLAGS
MOVEI S2,[ASCIZ/user /] ;THE DEFAULT
TXNE S1,OP.HST ;IS THIS A HOST OPERATOR?
MOVEI S2,[ASCIZ/host /] ;YES
TXNE S1,OP.REM ;IS IT REMOTE?
MOVEI S2,[ASCIZ/remote/] ;YES
TXNE S1,OP.SYS ;IS IT SYSTEM OPR?
MOVEI S2,[ASCIZ/system/] ;YES, SAY SO
$TEXT (OPRRTN,<^N11/NOD.NM(P1)/ ^T/0(S2)/ ^O3R/OPR.TN(P2)/ ^D3R/OPR.JB(P2)/ ^I/OPRUSN/^U/OPR.US(P2)/>)
$RET ;RETURN
TOPS20<
OPRUSN==NULTXT
>;END TOPS20
TOPS10<
OPRUSN: ITEXT (<^W6/OPR.UN(P2)/^W/OPR.UN+1(P2)/ >)
>;END TOPS10
OPRRTN: IDPB S1,WTOPTR ;SAVE THE BYTE
$RETT ;RETURN TRUE
OPRR.1: MOVX S1,WT.MOR ;SET MORE COMING FLAG
IORM S1,.OFLAG(MO) ;TURN ON THE FLAG
$CALL FINS.1 ;SEND THE MESSAGE
$CALL GETPAG ;GET A PAGE FOR OUTPUT
MOVX S1,.OMDSP ;SETUP DISPLAY MESSAGE
STORE S1,.MSTYP(MO),MS.TYP ;SAVE THE TYPE
MOVEI P3,.OHDRS(MO) ;GET FIRST FREE ADDRESS
$CALL OPRSPT ;OPR SET POINTER
JRST OPRDPY ;TRY THIS ONE AGAIN
;S2 MUST BE PRESERVED
OPRSPT: MOVEI S1,ARG.DA(P3) ;FREE LOCATION IN MESSAGE
HRLI S1,(POINT 7,) ;MAKE A BYTE POINTER
MOVEM S1,WTOPTR ;SAVE THE POINTER
MOVEI S1,ARG.DA(P3) ;GET THE POINTER
MOVEI T1,PAGSIZ ;SIZE OF A PAGE
ANDI S1,777 ;MAKE AS OFFSET
SUBI T1,-1(S1) ;GET NUMBER OF FREE WORDS
IMULI T1,NCHPW ;NUMBER OF CHARACTERS PER WORD
MOVEM T1,WTOCNT ;COUNT OF SPACE REMAINING
$RET ;RETURN
SUBTTL RESPON Respond command
;THIS ROUTINE WILL PROCESS A RESPOND MESSAGE TO A WTO AND PASS
;THE ANSWER TO THE REQUESTOR
RESPON: $CALL P$NUM ;GET THE NUMBER FROM MESSAGE
$RETIF ;NO..INVALID MESSAGE..RETURN
MOVE P1,S1 ;SAVE MESSAGE NUMBER IN P1
$CALL GETMSG ;GET THE MESSAGE
;O.K..IN S2
JUMPF RESP.5 ;NO..GIVE ERROR
RESP.1: MOVE P2,S2 ;SAVE THE MESSAGE ADDRESS
MOVE S1,MSL.ND(P2) ;GET THE NODE MESSAGE FOUND OUT
MOVE S1,NOD.NM(S1) ;GET THE NODE NAME
$CALL OPRENB ;SEE IF OPR ENABLED FOR NODE
JUMPF RESP.6 ;NO..SETUP ERROR
MOVEI T1,MSL.SZ(P2) ;GET START OF MESSAGE
LOAD S1,MSL.CD(P2) ;GET SENDERS CODE
STORE S1,.MSCOD(MO) ;SAVE IN MESSAGE
RESP.2: $CALL P$CURR ;GET THE CURRENT POINTER
MOVE T4,S1 ;SAVE THE BLOCK POINTER
$CALL P$TEXT ;GET THE TEXT ADDR AND LEN
$RETIF ;NOT TEXT..ERROR..RETURN
$CALL MOVARG ;BUILD TEXT ARGUMENT
MOVE S1,G$SND ;GET PID OF OPR SENDING IT
MOVEM S1,ARG.DA(P3) ;SAVE THE PID IN BLOCK
MOVE S1,G$OPRA ;GET THE OPR ADDRESS
MOVE T1,OPR.TN(S1) ;GET THE TERMINAL NUMBER
MOVE S2,OPR.ND(S1) ;GET THE NODE ENTRY
MOVE S2,NOD.NM(S2) ;GET THE NODE NAME
CAME S2,G$HOST ;SAME AS OUR NODE.. USE TERMINAL
MOVE T1,S2 ;GET THE NODE NAME
MOVEM T1,ARG.DA+1(P3) ;SAVE THE DATA
MOVEI S1,.ACKID ;GET ACK ID
MOVEI S2,ARG.SZ+1 ;SIZE OF BLOCK
$CALL ARGRTN ;SAVE THE ARGUMENT
ANDI P3,777 ;GET MESSAGE LENGTH
STORE P3,.MSTYP(MO),MS.CNT ;SAVE MESSAGE LENGTH
LOAD S1,MSL.PD(P2) ;PID OF THE SENDER
MOVEI S2,PAGSIZ ;PAGE MODE MESSAGE
$CALL SNDPID ;SEND THE MESSAGE
JUMPT RESP.4 ;O.K. RELEASE MESSAGE AND RETURN
MOVX S1,MS.TER ;NOTIFY ANYWAY?
TDNE S1,MSL.FL(P2) ;CHECK IF SET
JRST RESP.7 ;YES.. OUTPUT TO USER TERMINAL
MOVEM P1,G$ARG1 ;SAVE THE NUMBER
RESP.3: $CALL E$MNV ;MESSAGE NO LONGER VALID..
$CALL RELPAG ;RELEASE THE PAGE
RESP.4: MOVE S2,MSL.ND(P2) ;NODE MESSAGE FOUND AT
SOS NOD.CT(S2) ;DECREMENT THE COUNT
MOVE S1,NOD.ML(S2) ;GET THE LIST NUMBER
$CALL L%DENT ;DELETE THE ENTRY
$RETT ;RETURN TRUE
RESP.5: MOVEM P1,G$ARG1 ;SAVE THE NUMBER
$CALL E$NSM ;NO SUCH MESSAGE
$RETT ;RETURN TRUE
RESP.6: MOVEM P1,G$ARG1 ;SAVE THE MESSAGE NUMBER ARG1
MOVE S1,MSL.ND(P2) ;GET NODE ADDRESS
MOVE S1,NOD.NM(S1) ;GET NODE NAME
MOVEM S1,G$ARG2 ;SAVE ARG2
PJRST E$ONE ;OPR NOT ENABLED FOR NODE
RESP.7: MOVE S1,MSL.JB(P2) ;GET THE JOB NUMBER
$CALL GETUSR ;GET THE USER INFO
JUMPT RESP.8 ;O.K.. CONTINUE ON
SETZM G$ERR ;CLEAR ERROR CODE
MOVEM P1,G$ARG1 ;SAVE THE MESSAGE NUMBER
JRST RESP.3 ;GENERATE AN ERROR
RESP.8: MOVE S1,MSL.JT(P2) ;GET THE JOB LOGGED IN TIME
CAME S1,JOBJLT ;SAME JOB?
JRST RESP.3 ;NO..GENERATE AN ERROR
MOVE S1,T4 ;GET THE CURRENT PARSER POINTER
$CALL P$SETU ;SETUP THE PARSER POINTER
MOVEI P3,.OHDRS(MO) ;OUTPUT POINTER
$CALL BLDSND ;BUILD THE SEND
MOVEI S2,ARG.DA(S1) ;POINT TO THE DATA
MOVE S1,JOBTTY ;GET TERMINAL NUMBER
$CALL SNDTTY ;SEND THE MESSAGE
$CALL RELPAG ;RELEASE THE PAGE
JRST RESP.4 ;AND RELEASE THE MESSAGE
SUBTTL Operator privilege checking routines
;The routines on the following pages are called to check various
;operator capabilities from Orions command processing level. The
;following capabilies are defined:
;WHEEL capability
; OPR can do anything to any node. This also includes
; full file access. For TOPS10 the full file
; access PPN implies wheel.
;SYSTEM capability
; OPR can do anything to any node with this capabilility.
;HOST capability
; OPR can do anything to the host node.
;REMOTE capability
; OPR can do anything to the node where the terminal is
; physically connected. (Excluding the host system)
SUBTTL GETPRV Find out if the sender could be an OPR of sorts
;This routine is called to determine if the sender has any operator
;capability.
;Accepts G$PRVS and G$SID set up from received message
TOPS20<
GETPRV: $CALL CHKWHL ;Check for wheel or operator
$RETIF ;Not a wheel, forget it
MOVX S1,OP.SYS ;Wheel, claim to be a system OPR
MOVE TF,.OFLAG(MI) ;Get the flag bits from the hello msg.
TXNE TF,OP.RMT ;Does it claim to be remote?
MOVX S1,OP.REM ;Yes, set the privs to say so
$RETT
> ; End of TOPS20
TOPS10<
GETPRV: MOVX TF,TRUE ;Set for true return
MOVX S1,OP.SYS ;Assume system OPR
SKIPT DEBUGW ;Debugging or Wheel?
$CALL CHKWHL
$RETIT ;Yes..allow system privs
LOAD S1,G$JOB ;GET THE JOB NUMBER
MOVX S2,JI.BAT ;GET BATCH DATA AND OPR FIELDS
$CALL I%JINF ;GET THE DATA
LOAD S1,S2,OB.OPR ;GET THE OPERATOR BITS
MOVEI S2,PRVTAB ;ADRS OF PRIVILEGE BIT CONVERSION TABLE
$CALL TABSRC ;MAP IT
$RETIF ;Return on failure
MOVE S1,0(S2) ;GET THE PRIV BIT
$RETT ;AND RETURN
PRVTAB: $STAB
XWD .OBSOP,[EXP OP.SYS] ;SYSTEM OPERATOR
XWD .OBHOP,[EXP OP.HST] ;HOST ONLY OPERATOR
XWD .OBROP,[EXP OP.REM] ;REMOTE ONLY OPERATOR
$ETAB
> ; End of TOPS10
SUBTTL OPRENB Operator enabled for a node
;This routine checks to see if an OPR has sufficient privileges
;to perform a function for a specified node.
;Accepts S1/ Node name or number or -1 for all nodes
;Returns TRUE OPR has sufficient privileges
; FALSE OPR doesn't have enough privs
;If all nodes are specifed [-1] then system privs are required.
;If the specified node is the host then host or system privs are required.
;If the specified node is not the host, then the operator must be
;physically connected to the node and have remote privileges.
OPRENB: MOVE S2,S1 ;Save the node name
MOVE S1,G$OPRA ;Get the OPR data base address
CAME S2,[-1] ;All nodes?
JRST OPRE.2 ;No, try for host or remote
;Need system privs.
OPRE.1: $CALL O$SYSTEM ;Check for privs
JUMPF E$OSY ;Failed, do not return
$RET ;Return passing true up
;Here to try for host privs.
OPRE.2: CAME S2,G$HOST ;On the host name or
CAMN S2,G$HSTN ; number
SKIPA ;Yes
JRST OPRE.3 ;Go try for remote
;Need host privs.
$CALL O$HOST ;Check for privs.
JUMPF E$OHS ;Failed, do not return
$RET ;Return passing true up
;Here to try for remote
OPRE.3: $SAVE <P1> ;Need an ac here
MOVE P1,OPR.ND(S1) ;Get node data address
CAME S2,NOD.NM(P1) ;On node name or
CAMN S2,NOD.NU(P1) ; number?
SKIPA
JRST OPRE.1 ;Try for system just for grins
;Need remote privs.
$CALL O$REMOTE ;Check for privs
JUMPF E$ORS ;Failed, do not return
$RET ;Return passing true up
SUBTTL O$REMOTE/O$HOST/O$SYSTEM/CHKWHL Routs. to check privs.
;Accepts S1/ OPR data base address (not needed for CHKWHL)
;Returns TRUE OPR has privs needed
; FALSE Opr is not privy
O$REMOTE:
MOVX TF,OP.REM ;Get remote capability
TDNE TF,OPR.FL(S1) ;Have it?
$RETT ;Yes
PJRST O$SYSTEM ;No, try for system
TOPS10 <
O$HOST:
MOVX TF,OP.HST ;Get Host capability
TDNE TF,OPR.FL(S1) ;Have it?
$RETT ;Yes
PJRST O$SYSTEM ;No..Check for system and return
O$SYSTEM:
MOVX TF,OP.SYS ;Get system capability
TDNE TF,OPR.FL(S1) ;Have it?
$RETT ;Yes..we have a winner
;Fall through
>; End of TOPS10
CHKPRV: MOVX TF,OP.D60 ;Get the OPR is a DN60 bit.
TDNE TF,OPR.FL(S1) ;Is this an on the behalf of?
$RETF ;Yes, he is not a WHEEL!
;Continue checking
CHKWHL: SKIPE DEBUGW ;DEBUGGING ???
$RETT ;YES,,THEN OK
MOVX TF,MD.PWH!MD.POP ;CHECK FOR WHEEL OR OPERATOR
TDNN TF,G$PRVS ;WAS SENDER PRIVILEGED
$RETF ;NO..RETURN FALSE
$RETT ;YES..RETURN TRUE
SUBTTL TOPS20 Privilege checking routines
TOPS20<
O$HOST:
O$SYSTEM:
PJRST CHKPRV ;Go for privs
>;END TOPS20
SUBTTL G$ACK Send an ACK to sender if requested
;THIS ROUTINE SENDS AN ACKNOWLEDGEMENT MESSAGE IF ONE WAS REQUESTED.
;IF THERE WAS NO ERROR, A FLAG IS SET IN THE MESSAGE HEADER
G$ACK: $CALL BLDACK ;BUILD AN ACK MESSAGE
LOAD S1,.MSCOD(MI) ;GET CODE FROM ORIGINAL MESSAGE
STORE S1,.MSCOD(MO) ;AND SAVE IT IN ACK MESSAGE
SKIPN S1,G$SND ;PID TO SEND TO
PJRST RELPAG ;INVALID PID, SKIP SEND AND RELEASE PAGE
MOVEI S2,PAGSIZ ;GET PAGE SIZE
$CALL SNDPID ;SEND THE MESSAGE
$RETIT ;O.K. RETURN
PJRST RELPAG ;RELEASE PAGE AND RETURN
SUBTTL BLDACK Build an ACK message
;THIS ROUTINE WILL BUILD AN ACK MESSAGE TO BE SENT ON ERROR
;OR FOR MESSAGES TO OPR FROM ORION
BLDACK: $CALL GETPAG ;GET PAGE FOR OUTPUT
MOVX S1,MT.TXT ;GET MESSAGE TYPE CODE
STORE S1,.MSTYP(MO),MS.TYP ;SAVE MESSAGE TYPE
SKIPE G$ERR ;WAS THERE AN ERROR??
JRST BLDA.1 ;YES, NEED TO BUILD TEXT MESSAGE
MOVX S1,MF.NOM ;FLAG THIS AS JUST AN ACK
IORM S1,.MSFLG(MO) ;SAVE IN MESSAGE HEADER
MOVX S1,.OHDRS ;ACK HEADER SIZE
STORE S1,.MSTYP(MO),MS.CNT ;SAVE IN HEADER
$RETT ;RETURN
BLDA.1: MOVE S1,G$ERR ;GET THE ERROR CODE
MOVE S2,STSTBL(S1) ;GET STATUS FLAGS
MOVEM S2,.MSFLG(MO) ;SAVE THE FLAGS IN MESSAGE
SKIPGE S1,G$ERR ;GET ERROR CODE
JRST BLDA.3 ;NO..PROCESS AS ITEXT
MOVE S2,TXTTBL(S1) ;ADDRESS OF MESSAGE
MOVEI S1,ARG.DA+.OHDRS(MO) ;ADDRESS TO STORE DATA
$CALL TXTMOV ;MOVE THE DATA
BLDA.2: HRRZS S1 ;GET ENDING ADDRESS
ADDI S1,1 ;BUMP IT BY 1
ANDI S1,777 ;GET MESSAGE LENGTH
STORE S1,.MSTYP(MO),MS.CNT ;SAVE COUNT IN MESSAGE
SUBI S1,.OHDRS ;GET SIZE OF BLOCK
STORE S1,ARG.HD+.OHDRS(MO),AR.LEN ;SAVE ARGUMENT LENGTH
MOVX S1,.CMTXT ;GET TEXT CODE
STORE S1,ARG.HD+.OHDRS(MO),AR.TYP ;SAVE ARGUMENT TYPE
AOS .OARGC(MO) ;BUMP ARGUMENT COUNT
$RETT ;RETURN
BLDA.3: MOVEI S2,ARG.DA+.OHDRS(MO) ;GET PLACE TO STORE TEXT
HRLI S2,(POINT 7,0) ;MAKE A POINTER
MOVEM S2,TXTPTR ;SAVE THE POINTER
$TEXT (ACKERR,<^I/@TXTTBL(S1)/^0>) ;PLACE TEXT IN MESSAGE
MOVE S1,TXTPTR ;GET TXTPTR
JRST BLDA.2 ;FINISH OFF THE MESSAGE
ACKERR: IDPB S1,TXTPTR ;SAVE THE CHARACTER
$RETT ;RETURN TRUE
SUBTTL ADDNOD Add a node to the list
COMMENT \
ROUTINE TO SEE IF NODE IS ENTERED IN THE NODE LIST. IF NOT
ONE IS ENTERED AND THE MESSAGE AND OPR PID LISTS ARE GENERATED.
ON ENTRY: S1=SIXBIT NODE NAME TO SEARCH FOR
S2/NODE NUMBER
TRUE RETURN: S1=ADR OF NODE BLOCK
\
ADDNOD: $CALL FNDNOD ;LOCATE THE NODE BLOCK
$RETIT ;OK..RETURN
MOVE S1,G$NODL ;GET LIST NUMBER AGAIN
$CALL L%LAST ;POSITION TO END OF LIST
MOVE S1,G$NODL ;GET LIST NUMBER AGAIN
MOVEI S2,NOD.SZ ;NUMBER OF WORDS
$CALL L%CENT ;CREATE THE ENTRY
SKIPT ;Skip this if true
$STOP(CCE,Can't create list entry)
STORE T1,NOD.NM(S2) ;PLANT THE NODE NAME
STORE T2,NOD.NU(S2) ;SAVE NODE NUMBER
MOVE T1,S2 ;COPY ENTRY ADDRESS TO T1
$CALL L%CLST ;CREATE A MESSAGE LIST
STORE S1,NOD.ML(T1) ;STORE MESSAGE LIST NUMBER
SETZM NOD.CT(T1) ;CLEAR MESSAGE COUNT
SETZM NOD.TM(T1) ;AUTO DISPLAY TIME
$CALL L%CLST ;CREATE A PID LIST
STORE S1,NOD.OP(T1) ;STORE THE OPR LIST NUMBER
MOVE S1,T1 ;COPY ENTRY ADDRESS TO T1
$RETT ;RETURN TRUE
SUBTTL LOCNOD Locate a node in the list
;THIS ROUTINE WILL LOCATE A GIVEN NODE IN THE NODE LIST
;AND RETURN TRUE IF FOUND WITH S2 ADDRESS OF ENTRY
;LOCNOD: $CALL CHKNOD ;CHECK THE NODE
; $RETIF ;BAD NODE..RETURN
FNDNOD: DMOVE T1,S1 ;COPY OUR ARG TO T1,T2
MOVE S1,G$NODL ;GET NODE LIST NUMBER
$CALL L%FIRST ;POSITION TO FIRST
$RETIF ;NONE..RETURN FALSE
LOCN.1: TLNN T1,770000 ;WAS IT SIXBIT?
JRST LOCN.3 ;TRY NODE NUMBER
CAME T1,NOD.NM(S2) ;IS THIS THE NODE WE WANT?
JRST LOCN.4 ;NOT THIS ONE, GO LOOK AT NEXT
LOCN.2: MOVE S1,S2 ;COPY ENTRY ADDRESS TO S1
$RETT ;AND RETURN
LOCN.3: CAMN T1,NOD.NU(S2) ;MATCH NODE NUMBER?
JRST LOCN.2 ;SET NODE AND RETURN
LOCN.4: MOVE S1,G$NODL ;GET NOD LIST NUMBER
$CALL L%NEXT ;STEP TO NEXT ENTRY
JUMPT LOCN.1 ;SEE IF ITS THE ONE
DMOVE S1,T1 ;RESTORE NODE VALUES
$RET ;NO..PASS FALSE UP
SUBTTL DELNOD Delete a node from the list
;This Routine will Delete a Node entry (Oprs at the Node).
DELNOD: LOAD S1,.OHDRS+ARG.HD(MI),AR.TYP ;GET THE MESSAGE TYPE
CAIE S1,.OROBJ ;OBJECT BLOCK?
$RETF ;ERROR..RETURN
LOAD T1,.OHDRS+ARG.DA+OBJ.ND(MI) ;GET THE NODE NAME
MOVX S1,%ONLINE ;GET THE ONLINE FLAG
TDNE S1,.MSFLG(MI) ;WAS IT ONLINE?
JRST NODONL ;NODE ONLINE PROCESSING
MOVE S1,G$NODL ;GET THE NODE LIST
$CALL L%FIRST ;GET THE FIRST
SKIPT ;O.K.. SKIP
$STOP(NDE,Node database empty)
DELN.1: MOVX T2,ND.D60 ;DN60 NODE
TDNN T2,NOD.FL(S2) ;IS IT A DN60 NODE?
JRST DELN.3 ;NO..GET NEXT NODE
CAME T1,NOD.NM(S2) ;CHECK THE NODE NAME
JRST DELN.3 ;NO.. TRY NEXT ONE
MOVE T2,S2 ;SAVE NODE LIST ENTRY
DELN.2: MOVE S1,NOD.OP(T2) ;GET THE OPR LIST NUMBER
$CALL L%FIRST ;POSITION TO FIRST
JUMPF DELN.4 ;O.K..EXIT NOW
MOVE S1,OPR.PD(S2) ;GET THE PID
$CALL DELOPR ;DELETE THE OPR
JRST DELN.2 ;TRY AGAIN
DELN.3: MOVE S1,G$NODL ;GET THE NODE LIST
$CALL L%NEXT ;GET THE NEXT ONE
JUMPT DELN.1 ;TRY IT
$RETT ;RETURN
DELN.4: MOVE S1,G$NODL ;GET THE NODE LIST NUMBER
$CALL L%DENT ;DELETE THE ENTRY
$RETIT ;O.K. RETURN
$STOP (DDF,Delete DN60 node failed)
SUBTTL NODONL Node on line for DN60
;This Routine will create the Opr and Node for a Dn60 Operator
NODONL: SKIPN P1,.OFLAG(MI) ;PORT ,,LINE MEANS DN60 ?
$RETT ;NO ...RETURN
HLRZ S1,P1 ;GET THE PORT NUMBER
HRRO S2,P1 ;SETUP -1,, LINE NUMBER
STORE S1,S2,PPPLLL ;SAVE AS -1,,PPPLLL
EXCH S2,G$SND ;SAVE AS THE SENDER
MOVE S1,.OHDRS+ARG.DA+OBJ.ND(MI) ;GET THE NODE NAME
MOVEM S1,G$ARG1 ;SAVE THE NODE
SETZ S2, ;CLEAR NODE NUMBER
TLNN S1,700000 ;Is it a real node name?
MOVE S2,S1 ;No - set the real node number
MOVX T1,OP.REM!OP.D60 ;REMOTE, AND DN60 OPR
$CALL ADDOPR ;ADD THE OPERATOR
JUMPF E$OAE ;OPR ALREADY EXISTS
MOVE S1,OPR.ND(S2) ;GET THE NODE ADDRESS
MOVX T1,ND.D60 ;SET AS DN60 NODE
IORM T1,NOD.FL(S1) ;SET THE FLAG
MOVX T1,OP.NST ;CLEAR OPR NOT SETUP STATUS
ANDCAM T1,OPR.FL(S2)
$RETT ;O.K. RETURN
SUBTTL ADDOPR Add an OPR to data base and node list
;THIS ROUTINE WILL CREATE AN ENTRY IN THE OPR TABLE AS WELL AS
;THE NODE-OPR LIST
;CALL -
; S1/ NODE NAME
; S2/ NODE NUMBER
; T1/ OPERATOR PRIVILEGE BITS
;RETURN TRUE: S2/ ADDRESS OF OPR ENTRY
ADDOPR: $CALL .SAVE3 ;SAVE P1 AND P2 AND P3
DMOVE P1,S1 ;SAVE THE NODE DATA
MOVE P3,T1 ;SAVE THE OPERATOR FLAGS
TOPS10< $CALL CHKOPR > ;Check for duplicate OPR's
MOVE S1,G$SND ;GET THE OPRS PID
$CALL VALOPR ;CHECK IF SETUP
JUMPT .RETF ;FOUND...ERROR
DMOVE S1,P1 ;RESTORE NODE DATA
$CALL ADDNOD ;LOCATE THE NODE OR CREATE NODE
;S1 HAS NODE ENTRY ADDRESS ON RETURN
MOVE T1,S1 ;SAVE NODE ADDRESS IN T1
MOVE S1,NOD.OP(T1) ;NODE LIST OF OPRS FOR NODE
MOVE T2,S1 ;SAVE OPR LIST NUMBER IN T2
MOVEI S2,OPR.SZ ;SIZE OF OPR ENTRY
$CALL L%CENT ;CREATE AN ENTRY
SKIPT ;Skip this if true
PUSHJ P,S..CCE ;Can't create entry, go STOP
MOVE S1,G$SND ;GET THE PID OF OPR..
STORE S1,OPR.PD(S2) ;SAVE PID IN ENTRY
AOS NOD.OC(T1) ;BUMP THE ACTIVE OPERATOR COUNT
MOVX S1,OP.NST ;NOT SETUP FLAG
IORM S1,OPR.FL(S2) ;SAVE IN OPR ENTRY FLAGS
STORE T1,OPR.ND(S2) ;SAVE NODE ENTRY ADDRESS IN OPR ENTRY
STORE T2,OPR.LS(S2) ;SAVE OPR LIST NUMBER IN LIST
ADDO.2: MOVE P1,S2 ;SAVE OPR LIST ADDRESS IN P1
SKIPN TABFRE ;ANY FREE ENTRIES IN LIST
$CALL EXPTAB ;EXPAND THE OPR TABLE
MOVE S1,TABADR ;ADDRESS OF TABLE
ADDO.3: SKIPN TOP.PD(S1) ;IS THIS A FREE ENTRY
JRST ADDO.4 ;FOUND ENTRY..PROCESS IT
ADDI S1,TOP.SZ ;TABLE ENTRY SIZE
JRST ADDO.3 ;TRY NEXT ONE
ADDO.4: MOVE T1,S1 ;SAVE CURRENT ADDRESS IN T1
SOS TABFRE ;DECREMENT FREE COUNT
MOVE T2,G$SND ;GET THE PID
STORE T2,TOP.PD(T1) ;SAVE PID IN TABLE
STORE P1,TOP.OA(T1) ;SAVE OPR ENTRY ADDRESS IN TABLE
STORE T1,OPR.TP(P1) ;SAVE TABLE ADDRESS IN OPR ENTRY
MOVEM P1,G$OPRA ;SAVE OPR ADDRESS
$CALL L$AOPR## ;ADD THE OPERATOR LOGGING
MOVE S1,G$SID ;GET USER NUMBER OR PPN
MOVEM S1,OPR.US(P1) ;SAVE USER IN OPR BLOCK
TOPS10<
LOAD S1,G$JOB ;GET THE JOB NUMBER
$CALL GETNAM ;GET THE USER NAME
DMOVE S1,JOBUSN ;GET USER NAME
DMOVEM S1,OPR.UN(P1) ;SAVE THE NAME
>;END TOPS10
LOAD S1,G$JOB ;GET JOB NUMBER
MOVEM S1,OPR.JB(P1) ;SAVE OPR JOB NUMBER
MOVX S2,JI.TNO ;GET TERMINAL NUMBER
$CALL I%JINF ;GET JOB INFO
JUMPF ADDO.5 ;IGNORE IF FALSE***
MOVEM S2,OPR.TN(P1) ;SAVE TERMINAL NUMBER
ADDO.5: MOVE S2,P1 ;GET OPR ADDRESS
IORM P3,OPR.FL(S2) ;AND SAVE THE FLAGS, TOO
ADD P1,[POINT <WID(WO.ALL)>,OPR.OF]
MOVX P2,.RTJST(-1,WO.ALL) ;GET ALL FLAGS
MOVEI P3,.OTMAX+NUMAPL+1 ;GET NUMBER OF FIELDS
IDPB P2,P1 ;REQUEST DISPLAY FOR ALL
SOJG P3,.-1
$RETT ;RETURN TRUE
SUBTTL EXPTAB Expand OPR table
;THIS ROUTINE WILL EXPAND THE OPR TABLE TO MAKE ROOM
;FOR MORE ENTRIES
;AS WELL AS THE OPR RESEND TABLE LENGTH
EXPTAB: MOVE S1,TABCNT ;GET COUNT OF ENTRIES NOW
ADDI S1,^D10 ;INCREMENT TABLE BY 10 ENTRIES
IMULI S1,TOP.SZ ;OPR TABLE SIZE
$CALL M%GMEM ;GET THE MEMORY
EXCH S2,TABADR ;SAVE NEW ADDRESS AND GET OLD
JUMPE S2,EXPT.1 ;FIRST TIME..NO TABLE SO FAR
MOVE T1,S2 ;SAVE ADDRESS IN T1
HRL S2,S2 ;SOURCE ADDRESS IN LEFT HALF
HRR S2,TABADR ;DESTINATION ADDRESS IN RIGHT
MOVE S1,TABCNT ;NUMBER OF ENTRIES
IMULI S1,TOP.SZ ;MULTIPLY BY ENTRY SIZE
ADD S1,TABADR ;ADD IN TABLE ADDRESS
BLT S2,-1(S1) ;MOVE THE TABLE
MOVE S2,T1 ;PUT OLD ADDRESS IN S2
MOVE S1,TABCNT ;NUMBER OF ENTRIES
IMULI S1,TOP.SZ ;SIZE OF TABLE
$CALL M%RMEM ;RELEASE THE MEMORY
EXPT.1: MOVE S1,OPRRCT ;GET OPR COUNT
ADDI S1,^D10 ;GET INCREMENT SIZE
$CALL M%GMEM ;GET SOME MEMORY
EXCH S1,OPRRCT ;GET THE OLD COUNT AND REPLACE WITH NEW
EXCH S2,OPRRSL ;RESEND LIST ADDRESS
JUMPE S2,EXPT.2 ;FIRST TIME..=0 GO TO EXPT.1
$CALL M%RMEM ;RETURN THE OLD LIST
EXPT.2: MOVEI S1,^D10 ;NUMBER OF ENTRIES TO INCREMENT
ADDM S1,TABCNT ;SAVE TABLE ENTRIES
ADDM S1,TABFRE ;SAVE FREE ENTRY COUNT
MOVE S1,TABADR ;GET THE TABLE ADDRESS
MOVE S2,TABCNT ;GET THE TABLE COUNT
EXPT.3: SKIPN T1,TOP.OA(S1) ;VALID ENTRY?
$RETT ;NO..END OF LIST
MOVEM S1,OPR.TP(T1) ;RESET THE ADDRESS
ADDI S1,TOP.SZ ;GET NEXT ADDRESS
SOJG S2,EXPT.3 ;TRY THE NEXT ONE
$RETT ;ALL DONE..RETURN
SUBTTL VALOPR Validate the OPR
;THIS ROUTINE WILL CHECK TO SEE IF A GIVEN OPR PID IS VALID
;TO SEND COMMANDS TO ORION
;RETURNS S2/ ADDRESS OF OPR LIST ENTRY
VALOPR: MOVE S2,TABADR ;GET THE TABLE ADDRESS
SKIPN T1,TABCNT ;MAXIMUM NUMBER OF ENTRIES
$RETF ;NONE SETUP SO FAR..RETURN
VALO.1: CAMN S1,TOP.PD(S2) ;CHECK PID FOR MATCH
JRST VALO.2 ;MATCH..SETUP FOR RETURN
ADDI S2,TOP.SZ ;BUMP TO NEXT ENTRY
SOJG T1,VALO.1 ;LOOP THROUGH ALL ENTRIES
$RETF ;OPR NOT HERE..RETURN FALSE
VALO.2: MOVE S2,TOP.OA(S2) ;OPR LIST ENTRY ADDRESS
$RETT ;RETURN TRUE
TOPS10 <
SUBTTL CHKOPR Check if previously OPR
; The purpose of this routine is to determine if the job trying
; to start OPR has previously had OPR running and had ^Cd out.
; If this is the case, then delete the previous OPR entry.
; T1 contains Operator priv. bits (inc. DN60)
; preserves all ACs except S1 and S2
CHKOPR: TXNE T1,OP.D60 ;Is this a DN60 (from QUASAR)?
$RET ;Yes - don't want any deleting
$SAVE <T1>
MOVE S2,TABADR ;Get table address
SKIPN T1,TABCNT ;Maximum number of entries
$RET ;None - quit without prejudice
; LOOP
CHKO.1: MOVE S1,TOP.OA(S2) ;Get address of OPR entry
MOVE S1,OPR.JB(S1) ;Get the job number of this entry
CAMN S1,G$JOB ;Is this from the same job
JRST CHKO.2 ;Yes, go get rid of it
ADDI S2,TOP.SZ ;Bump to next entry
SOJG T1,CHKO.1 ;Loop on all entries
$RET ;Done - quit without prejudice
CHKO.2: MOVE S1,TOP.PD(S2) ;Get the PID for the duplicate OPR
$CALL DELOPR ;Delete the OPR
$RET ;and finish
> ;End of TOPS10
SUBTTL DELOPR Delete an OPR entry from table and node list
;THIS ROUTINE WILL REMOVE AN OPR ENTRY FROM THE TABLE
;OF OPRS AS WELL AS FROM THE NODE LIST OF OPRS.
DELOPR: $CALL .SAVET ;SAVE T REGS
$CALL VALOPR ;VALIDATE THE OPR
SKIPT ;O.K...SKIP
$RETF ;JUST RETURN FALSE
MOVE T1,OPR.TP(S2) ;ADDRESS OF OPR TABLE ENTRY
AOS TABFRE ;BUMP FREE ENTRY COUNT
MOVE T2,OPR.PD(S2) ;OPR PID
SETZM TOP.OA(T1) ;CLEAR ADDRESS OF ENTRY
SETZM TOP.PD(T1) ;CLEAR PID
MOVE S1,OPR.LS(S2) ;OPR LIST NUMBER
$CALL L%FIRST ;POSITION TO FIRST
SKIPT ;OPR DELETE FATAL ERRO
$STOP(ODE,OPR delete entry error)
DELO.1: CAMN T2,OPR.PD(S2) ;FOUND THE ENTRY
JRST DELO.2 ;YES...DELETE ENTRY
MOVE S1,OPR.LS(S2) ;GET LIST NUMBER FROM ENTRY
$CALL L%NEXT ;GET NEXT ENTRY
JUMPT DELO.1 ;CHECK OUT ENTRY
$CALL S..ODE ;FATAL ERROR EXIT
DELO.2: MOVE T1,OPR.ND(S2) ;GET NODE ADDRESS
SOS NOD.OC(T1) ;REDUCE OPRS AT NODE COUNT
MOVEM S2,G$OPRA ;SAVE OPR ADDRESS
$CALL L$DOPR## ;DELETE THE OPERATOR LOGGING
MOVE S2,G$OPRA ;GET OPR ADDRESS
MOVE S1,OPR.LS(S2) ;LIST NUMBER
$CALL L%DENT ;DELETE THE ENTRY
JUMPF S..ODE ;OPR DELETE ERROR
$RET ;RETURN
;***NODE COUNT OF OPRS GOES TO ZERO..NODE NOT THERE..DELETE NODE
SUBTTL SNDLST Send unsent messages to OPR and OBJECTS
;THIS ROUTINE WILL TRY TO SEND THE UNSENT MESSAGES TO THE
;APPROPRIATE OPR OR OBJECT
;CALL S1/ MESSAGES TO SEND
SNDLST: $CALL .SAVE1 ;SAVE AN AC
MOVE P1,S1 ;SAVE THE FLAGS
MOVE S1,G$SNDL ;GET SEND LIST
$CALL L%FIRST ;POSITION TO THE FIRST
JUMPF .RETT ;NONE..RETURN
SNDL.1: TDNN P1,RSD.FL(S2) ;CHECK FLAGS FOR OBJECT
JRST SNDL.2 ;NO MATCH..TRY NEXT ONE
MOVE S1,G$SND ;GET SENDERS PID(OBJECT)
$CALL RSDPID ;RESEND TO PID AND DELETE IF O.K.
JUMPF .RETT ;ERROR..STOP SENDING
SNDL.2: MOVE S1,G$SNDL ;GET SEND LIST
$CALL L%NEXT ;POSITION TO THE NEXT ENTRY
JUMPT SNDL.1 ;O.K...TRY NEXT ONE
$RETT ;RETURN O.K.
SUBTTL RSDPID Resend messages to a specific PID
;CALL S1/ PID TO RESEND TO
RSDPID: $CALL .SAVE1 ;SAVE 1 FOR SCRATCH
MOVE MO,RSD.MS(S2) ;GET MESSAGE ADDRESS
ADDI MO,(S2) ;GET ACTUAL ADDRESS
MOVE P1,S2 ;SAVE ENTRY ADDRESS
LOAD S2,.MSTYP(MO),MS.CNT ;GET MESSAGE SIZE
$CALL CHKSFL ;CHECK FOR SEND FAILURES
JUMPT RSDP.3 ;YES..JUST REQUEUE
$CALL SNDMSG ;SEND THE MESSAGE
JUMPF RSDP.2 ;FAIL..QUEUE UP FOR RESEND
RSDP.1: SOS G$NSNT ;DECREMENT NOT SENT COUNT
MOVE S1,G$SNDL ;GET SEND LIST
PJRST L%DENT ;DELETE THE ENTRY AND RETURN
RSDP.2: MOVE S1,SNDBLK+SAB.PD ;GET THE PID
$CALL ADDSFL ;ADD THE SEND FAILURE
MOVE S1,G$RSDL ;QUEUE UP FOR RESEND
$CALL L%LAST ;POSTION TO THE END
LOAD S2,RSD.HD(P1),RS.LEN ;GET THE LENGTH OF ENTRY
MOVE S1,G$RSDL ;GET LIST NUMBER
$CALL L%CENT ;CREATE AN ENTRY
SKIPT ;Skip this if true
PUSHJ P,S..CCE ;Can't create entry, go STOP
MOVE S1,G$SND ;GET SENDERS PID
MOVE T1,RSD.PD(P1) ;GET PID OFFSET
ADDI T1,(P1) ;POINT TO PID AREA
MOVEM S1,(T1) ;SAVE THE PID
AOS RSD.CT(P1) ;BUMP COUNT OF PIDS
MOVE S1,P1 ;OLD ENTRY
$CALL MOVBLK ;MOVE THE BLOCK TO OTHER LIST
SKIPN G$RSDC ;FIRST MESSAGE TO RESEND?
$CALL REQRSD ;YES..REQUEST RESEND
AOS G$RSDC ;BUMP THE RESEND COUNT
SETZM RSDCNT ;CLEAR THE RESEND COUNT
JRST RSDP.1 ;NOW DELETE OLD ONE
RSDP.3: MOVEM S1,SNDBLK+SAB.PD ;SAVE THE PID
JRST RSDP.2 ;REQUEUE THE MESSAGE
SUBTTL MOVARG Setup argument in output message
;THIS ROUTINE WILL MOVE AN ARGUMENT BLOCK FROM INPUT TO OUTPUT
;MESSAGE
;
;CALL S1/ ADDRESS OF SOURCE TEXT
; S2/ LENGTH IN WORDS OF TEXT
;
;RETURN P3/ UPDATED TO NEXT FREE OUTPUT LOCATION
MOVARG:: HRL T1,S1 ;ADDRESS OF TEXT SOURCE
HRRI T1,ARG.HD(P3) ;DESTINATION ADDRESS
ADD P3,S2 ;GET ENDING ADDRESS
BLT T1,-1(P3) ;MOVE TEXT TO MESSAGE
AOS .OARGC(MO) ;BUMP THE ARGUMENT COUNT
$RETT ;RETURN TRUE
SUBTTL MOVAR2 Add a 2 word argument to the message
;ADDS A 2 WORD BLOCK TO THE MESSAGE
;CALL -
; S1/ BLOCK TYPE
; S2/ ARGUMENT DATA
;RETURNS -
; TRUE
MOVAR2:: HRLI S1,ARG.DA+1 ;LENGTH
MOVEM S1,G$2SCR+ARG.HD ;SAVE IN TEMP
MOVEM S2,G$2SCR+ARG.DA ;SAVE DATA
DMOVE S1,[EXP G$2SCR,ARG.DA+1] ;AIM AT BLOCK, AND LENGTH
PJRST MOVARG ;MOVE IT IN
;*** CHECK FOR NULL ANSWER...
SUBTTL SNDAOP Send a message to all OPRs
;THIS ROUTINE WILL SEND A MESSAGE TO ALL OPRS AT A GIVEN NODE
;OR TO SYSTEM NODE IF NO OPRS AT THAT NODE
;OR IF -1 IS SET IN NODE ADDRESS TO ALL OPRS AT ALL NODES
SNDAOP: SETZM NOALTN ;ALTERNATE NODE IF NODE FAILS
;THIS ENTRY IS FOR NO ALTERNATES AND CALLER AS MADE NOALTN -1 TO
;PREVENT SEARCH OF OTHER NODES IF FAILS
SNDNAL: $CALL .SAVE1 ;GET AN AC FOR SCRATCH
MOVE P1,S1 ;SAVE THE NODE LIST ENTRY
SETZM MSGCNT ;CLEAR COUNT OF SENDS
SETZM RSDCNT ;SET RESEND COUNT INDICATOR
CAMN P1,[-1] ;IS IT -1
JRST SNDA.8 ;YES..SEND TO ALL NODES
$CALL SNDOPR ;SEND TO THE OPRS AT NODE
MOVX S1,WT.SND ;GET 'SEND TO CENTRAL AND REMOTE' BIT
TDNE S1,.OFLAG(MI) ;WANT THIS?
JRST SNDA.1 ;YES
JUMPT SNDA.5 ;SENT O.K. CHECK RESENDS
SKIPE NOALTN ;SEND TO ALTERNATES ON FAILURE?
$RET ;NO..RETURN..PASSING FALSE UP
SNDA.1: MOVE T1,NOD.FL(P1) ;GET ENTRIES FLAGS
TXNE T1,ND.SYS ;WAS IT THE SYSTEM NODE
JRST SNDA.5 ;YES..CHECK RESEND AND RETURN
MOVE S1,G$NODL ;GET NODE LIST ENTRY
$CALL L%FIRST ;GET THE FIRST ENTRY
JUMPF SNDA.5 ;No entries, skip this
SNDA.2: MOVE T1,NOD.FL(S2) ;CHECK FLAGS OF ENTRY
TXNE T1,ND.SYS ;SYSTEM OPR?
JRST SNDA.4 ;YES..SEND TO ALL AT THIS NODE
SNDA.3: MOVE S1,G$NODL ;GET THE NODE LIST
$CALL L%NEXT ;GET THE NEXT ENTRY
JUMPT SNDA.2 ;O.K. TRY NEXT ENTRY
JRST SNDA.5 ;CHECK SEND AND RESEND INFO
SNDA.4: MOVE P1,S2 ;GET THE ENTRY ADDRESS
$CALL SNDOPR ;SEND TO ALL OPRS
;CHECK RESEND AND SEND AFTER RETURN
SNDA.5: SKIPG RSDCNT ;ANY RESENDS?
JRST SNDA.6 ;YES.. REQUEUE THE MESSAGE
SKIPN G$RSDC ;FIRST MESSAGE TO BE RESENT?
$CALL REQRSD ;YES..REQUEST RESEND
AOS G$RSDC ;BUMP THE RESEND COUNT
MOVX S1,R.SOPR ;RESENDS FOR OPR
MOVE S2,G$RSDL ;RESENDS..(SEND FAILURE LIST)
JRST SNDA.7 ;REQUEUE AND RELEASE
SNDA.6: SKIPLE S1,MSGCNT ;SENT MESSAGE TO ANYONE??
PJRST RELPAG ;YES..RELEASE PAGE AND RETURN
AOS G$NSNT ;BUMP NOT SENT COUNT
MOVX S1,R.SOPR!R.NSNT ;OPR MESSAGE NOT SENT
MOVE S2,G$SNDL ;LIST FOR UNSENT MESSAGES
SNDA.7: $CALL REQMSG ;REQUEUE THE MESSAGE
PJRST RELPAG ;RELEASE THE PAGE AND RETURN
SNDA.8: MOVE S1,G$NODL ;GET NODE LIST NUMBER
$CALL L%FIRST ;POSITION TO THE FIRST
JUMPF SNDA.5 ;No entries, skip this
SNDA.9: MOVE P1,S2 ;GET THE ADDRESS IN P1
$CALL SNDOPR ;SEND TO ALL OPRS AT NODE
MOVE S1,G$NODL ;GET NODE LIST NUMBER
$CALL L%NEXT ;GET THE NEXT ENTRY
JUMPF SNDA.5 ;ANALYZE RESULTS AND RETURN
JRST SNDA.9 ;TRY NEXT ONE
SUBTTL SNDOPR Send a message to at least one OPR
;THIS ROUTINE WILL SEND THE MESSAGE TO ALL OPRS AND RETURN FALSE
;IF NO OPRS AT NODE OTHERWISE WILL BE QUEUED UP FOR THE OPR
SNDOPR: MOVE T4,MSGCNT ;SAVE MESSAGE COUNT VALUE
MOVE T3,RSDCNT ;GET THE CURRENT RESEND COUNT
LOAD S1,NOD.OP(P1) ;GET OPR LIST NUMBER
$CALL L%FIRST ;POSITION TO FIRST ENTRY
$RETIF ;RETURN FALSE
SNDO.1: MOVEM S2,G$OPRA ;SAVE OPR BASE ADDRESS
MOVE T2,OPR.FL(S2) ;GET THE OPRS FLAGS
TXNE T2,OP.NST ;IS OPR SETUP?
JRST SNDO.6 ;IGNORE THIS OPR
$CALL CHKOSD ;CHECK IF OPR WANTS MESSAGE
JUMPF SNDO.5 ;NO..BYPASS THIS OPR
SNDO.2: MOVE S2,G$OPRA ;GET THE OPR ADDRESS
LOAD S1,OPR.PD(S2) ;GET THE OPRS PID
MOVE T2,S1 ;SAVE THE PID
$CALL CHKSFL ;CHECK FOR SEND FAILURES ON PID
JUMPT SNDO.4 ;MARK FOR RESEND
LOAD S2,.MSTYP(MO),MS.CNT ;GET THE MESSAGE LENGTH
$CALL SNDMSG ;SEND THE MESSAGE
JUMPT SNDO.5 ;O.K. COUNT IT AND SEND TO OTHERS
AOS G$SNDF ;BUMP SEND FAILURE COUNT
CAXE S1,ERNSP$ ;NO SUCH PID??
JRST SNDO.4 ;MARK TO RESEND
SNDO.3: MOVE S1,T2 ;GET THE BAD PID
$CALL DELOPR ;DELETE THE OPERATOR
JRST SNDO.6 ;TRY NEXT OPERATOR
SNDO.4: MOVE S1,T2 ;GET THE PID
$CALL ADDSFL ;ADD SEND FAILURE PID
JRST SNDO.6 ;TRY NEXT OPR
SNDO.5: AOS MSGCNT ;BUMP THE SEND COUNT
SNDO.6: LOAD S1,NOD.OP(P1) ;GET OPR PID LIST
$CALL L%NEXT ;GET THE NEXT ENTRY
JUMPT SNDO.1 ;TRY NEXT OPR
CAML T4,MSGCNT ;SEND ANY MESSAGES
CAMGE T3,RSDCNT ;REQUEUE ANY MESSAGES
$RETT ;YES..RETURN TRUE
$RETF ;NO..SENDS
SUBTTL CHKOSD Check message flags for OPR
;THIS ROUTINE WILL DETERMINE IF OPR WANTS TO SEE THE MESSAGE
;AND
;
;RETURN TRUE: OPR WANTS TO SEE IT
;RETURN FALSE: OPR DOESN'T WANT TO SEE IT
CHKOSD: SKIPE G$ASND ;ALWAYS SEND MESSAGE?
$RETT ;YES..MAKE OPR SEE IT
MOVE S1,WDAOBT ;GET OBJECT TYPE FROM MESSAGE
MOVE S2,WDAFLG ;GET THE FLAGS FROM MESSAGE
; JRST TSTODP
;TSTODP Test flags to see if output is desired
;Accepts S1/ Object type
; S2/ Flags to test
;Returns TRUE One of the flags was on
; FALSE All of the flags were off
TSTODP: MOVE TF,S2 ;Save the flags
CAILE S1,APLBEG ;Application object type?
SUBI S1,APLBEG-.OTMAX ;Yes..compute object offset
CAILE S1,.OTMAX+NUMAPL ;Check range
$RETF
IDIVI S1,<^D36/<WID(WO.ALL)>> ;Compute word offset
IMULI S2,<WID(WO.ALL)> ;Compute bit offset
MOVNS S2 ;Force shift righte
LSH TF,0(S2) ;Position the flags
ADD S1,G$OPRA ;Add base of OPR entry
TDNN TF,OPR.OF(S1) ;Test the flags
$RETF ;All flags were off
$RETT ;One flag was on
SUBTTL MOVBLK Move a standard argument block
;THIS ROUTINE WILL MOVE A STANDARD GALAXY BLOCK FROM
;SOURCE ADDRESS TO DESTINATION ADDRESS
;THE LENGTH IS GOTTEN FROM SOURCE FIRST WORD..(HEADER)
;
;CALL S1/ SOURCE ADDRESS
; S2/ DESTINATION ADDRESS
;
;RETURN S2/ UPDATED DESTINATION ADDRESS
;
;SCRATCH AC T1
MOVBLK: HRL T1,S1 ;GET SOURCE ADDRESS IN LEFT HALF
HRR T1,S2 ;AND DESTINATION IN RIGHT HALF
LOAD S1,ARG.HD(S1),AR.LEN ;GET THE LENGTH OF BLOCK
ADD S2,S1 ;GET ENDING ADDRESS
BLT T1,-1(S2) ;MOVE THE BLOCK
$RETT ;RETURN TRUE
SUBTTL REQMSG Reque a message to be sent later
;THIS ROUTINE WILL SETUP THE RESEND ENTRY FOR A MESSAGE
;
;CALL S1/ FLAGS FOR REQUEUE
; S2/ LIST NUMBER TO REQUEUE IN
;
;RETURN S2/ ENTRY ADDRESS
REQMSG: DMOVE T3,S1 ;SAVE S1 AND S2 IN T3 AND T4
MOVE S1,T4 ;GET RESEND LIST ADDRESS
$CALL L%LAST ;POSITION TO THE END
LOAD S2,.MSTYP(MO),MS.CNT ;GET THE MESSAGE COUNT
ADDI S2,RSD.SZ ;GET SIZE OF BLOCK AND PID LIST HEADER
SKIPG S1,RSDCNT ;ANY RESENDS
MOVEI S1,1 ;ALWAYS LEAVE 1
ADD S2,S1 ;GET THE NEW COUNT
MOVE S1,T4 ;GET RESEND LIST NUMBER
MOVE T1,S2 ;SAVE SIZE OF ENTRY
$CALL L%CENT ;CREATE AN ENTRY
SKIPT ;Skip this if true
PUSHJ P,S..CCE ;Can't create entry, go STOP
STORE T1,RSD.HD(S2),RS.LEN ;SAVE THE LENGTH
MOVE S1,G$NOW ;GET THE TIME
MOVEM S1,RSD.TM(S2) ;SAVE TIME IN ENTRY
MOVE T2,S2 ;SAVE ENTRY ADDRESS
MOVEI S1,RSD.SZ ;GET RESEND BLOCK SIZE
MOVEM S1,RSD.PD(S2) ;SAVE AS PID OFFSET
MOVEI T1,RSD.SZ+1 ;OFFSET FOR MESSAGE..LEAVE FOR 1 PID
SKIPG RSDCNT ;MOVE PID LIST IF ANY
JRST REQM.1 ;ASSUME 1
HRL S1,OPRRSL ;ADDRESS OF RESEND LIST
HRRI S1,RSD.SZ(S2) ;START OF FREE AREA
MOVEI T1,RSD.SZ(S2) ;ADDRESS OF DESTINATION STARTING POINT
ADD T1,RSDCNT ;ADD IN NUMBER OF PIDS
BLT S1,-1(T1) ;MOVE THE PIDS
SUB T1,S2 ;GET THE OFFSET
REQM.1: MOVEM T1,RSD.MS(S2) ;SAVE OFFSET FOR MESSAGE
MOVE T2,S2 ;SAVE MESSAGE ADDRESS
ADD S2,T1 ;POSITION TO TEXT
MOVEI S1,.MSTYP(MO) ;GET THE MESSAGE ADDRESS
$CALL MOVBLK ;MOVE THE BLOCK
IORM T3,RSD.FL(T2) ;NO..SAVE THE FLAGS
MOVE S2,T2 ;SAVE THE ADDRESS
SETZ S1, ;CLEAR S1
EXCH S1,RSDCNT ;RESET AND GET RSDCNT
MOVEM S1,RSD.CT(S2) ;SAVE THE COUNT
$RETT ;RETURN S2, ENTRY ADDRESS
SUBTTL RSDMSG Resend requed messages
;THIS ROUTINE WILL TRY TO SEND ANY MESSAGES QUEUED UP IN THE SYSTEM
;AND WILL DELETE FROM THE QUEUE WHEN SENT TO ALL PIDS OR RETRY COUNT
;EXHAUSTED
RSDMSG: SKIPN G$RSDC ;ANY MESSAGES TO RESEND
$RETT ;NO..RETURN O.K.
$CALL RSDM.0 ;YES..SEND WHAT WE CAN
SKIPN G$RSDC ;GET ALL OF THEM?
$RETT ;YES..JUST RETURN
REQRSD: MOVEI S1,^D15*^D1000 ;NO..RETRY IN 15 SECONDS
MOVEI S2,RSDMSG
$CALL REQTIM ;MAKE THE TIMER REQUEST
$RETT
RSDM.0: $CALL CLRSFL ;CLEAR SEND FAILURE LIST
SETZM RSDCNT ;CLEAR THE RESEND COUNT
$CALL .SAVE3 ;GET SOME SCRATCH ACS
MOVE S1,G$RSDL ;GET RESEND LIST NUMBER
$CALL L%FIRST ;POSITION TO THE FIRST ENTRY
SKIPT ;SKIP IF THERE
$STOP(RCO,G$RSDC off .. does not match list data)
MOVE P1,S2 ;SAVE ADDRESS IN S2
RSDM.1: MOVE P2,RSD.CT(P1) ;GET COUNT OF PIDS
MOVE P3,RSD.PD(P1) ;GET PID OFFSET
ADDI P3,(P1) ;COMPUTE MESSAGE ADDRESS
RSDM.2: SKIPN S1,(P3) ;GET THE FIRST PID
JRST RSDM.4 ;ZERO..GET NEXT ENTRY
$CALL CHKSFL ;CHECK FOR SEND FAILURE ON PID
JUMPT RSDM.4 ;CHECK NEXT ONE
MOVE MO,RSD.MS(P1) ;GET MESSAGE ADDRESS
ADDI MO,(P1) ;GET ACTUAL ADDRESS
LOAD S2,.MSTYP(MO),MS.CNT ;GET MESSAGE LENGTH
$CALL SNDMSG ;SEND THE MESSAGE
JUMPF RSDM.7 ;SEND FAILURE..UP COUNTS
MOVX S1,R.NSNT ;CLEAR THE NOT SENT FLAG
ANDCAM S1,RSD.FL(P1) ;CLEAR IT IN BLOCK
RSDM.3: SETZM (P3) ;CLEAR THE PID ENTRY
SOSG RSD.CT(P1) ;ANY MORE PIDS LEFT
JRST RSDM.5 ;NO..REMOVE ENTRY
RSDM.4: AOS P3 ;NEXT PID
SOJG P2,RSDM.2 ;CHECK IF MORE
JRST RSDM.6 ;GET NEXT ENTRY
RSDM.5: MOVX S1,R.NSNT ;GET THE NOT SENT FLAG
TDNE S1,RSD.FL(P1) ;WAS IT EVER SENT
$CALL REQNST ;REQUEUE FOR NOT SENT
MOVE S1,G$RSDL ;GET THE RESEND LIST
$CALL L%DENT ;DELETE THE ENTRY
SOSGE G$RSDC ;DECREMENT RESEND COUNT
$STOP(RCN,G$RSDC is negative database confused)
RSDM.6: MOVE S1,G$RSDL ;GET THE LIST NUMBER
$CALL L%NEXT ;GET THE NEXT ENTRY
JUMPF .RETT ;DONE..RETURN
SETZM RSDCNT ;CLEAR THE RESEND COUNT
MOVE P1,S2 ;SAVE THE MESSAGE ADDRESS
JRST RSDM.1 ;TRY THIS ONE
RSDM.7: AOS G$SNDF ;BUMP SEND FAILURE COUNT
AOS RSD.RT(P1) ;BUMP THE RETRY COUNT...****
CAXE S1,ERNSP$ ;NO SUCH PID??
JRST RSDM.8 ;NO..RETRY LATER
MOVE S1,RSD.FL(P1) ;GET THE FLAGS
TXNN S1,R.SOPR ;WAS IT OPR RESEND
JRST RSDM.3 ;DELETE PID FROM ENTRY
MOVE S1,(P3) ;GET THE PID
$CALL DELOPR ;DELETE THE OPR
JRST RSDM.3 ;TRY NEXT ONE
RSDM.8: MOVE S1,(P3) ;GET THE PID
$CALL ADDSFL ;ADD THE SEND FAILURE
JRST RSDM.4 ;FINISH OFF ENTRY
SUBTTL REQNST Reque unsent messages
;THIS ROUTINE WILL MOVE A RESEND BACK TO THE NEVER SENT QUEUE IF MESSAGE
;NOT SENT AND OPR INVALID
REQNST: MOVE S1,G$SNDL ;NOT SENT LIST
$CALL L%LAST ;POSITION TO LAST
AOS G$NSNT ;BUMP NOT SENT COUNT
MOVE S1,G$SNDL ;GET LIST NUMBER AGAIN
LOAD S2,RSD.HD(P1),RS.LEN ;GET LENGTH OF BLOCK
$CALL L%CENT ;CREATE AN ENTRY
SKIPT ;Skip this if true
PUSHJ P,S..CCE ;Can't create entry, go STOP
MOVE S1,P1 ;ADDRESS OF OLD ONE
PJRST MOVBLK ;MOVE THE BLOCK AND RETURN
SUBTTL ADDSFL Add a send failure to table
;
;S1/ PID TO ADD
ADDSFL: MOVEM S1,G$SFPD ;SAVE THE PID
SKIPN SFLFRE ;ANY AVAILABLE ENTRIES
$CALL ADDP.3 ;NO...GET SOME MORE
$CALL .SAVE2 ;GET A SCRATCH AC
MOVE S1,G$SFPD ;GET THE PID
$CALL CHKS.0 ;CHECK IF IN LIST
JUMPT ADDP.5 ;BUMP THE COUNT AND RETURN
MOVE S2,SFLADR ;GET ADDRESS OF TABLE
ADDP.1: SKIPN SFL.PD(S2) ;IS THE ENTRY AVAILABLE
JRST ADDP.2 ;YES..USE IT
ADDI S2,SFL.SZ ;BUMP TO NEXT ONE
JRST ADDP.1 ;TRY AGAIN
ADDP.2: MOVE S1,G$SFPD ;GET THE PID
MOVEM S1,SFL.PD(S2) ;SAVE PID IN TABLE
AOS SFL.CT(S2) ;BUMP COUNT OF MESSAGES
SOS SFLFRE ;DECREMENT FREE LOCATIONS
ADDRTY: AOS S2,RSDCNT ;BUMP RESEND COUNT AND PLACE IN S2
ADD S2,OPRRSL ;GET ADDRESS FOR ENTRY
MOVEM S1,-1(S2) ;SAVE THE PID
$RETT ;RETURN
ADDP.3: $CALL .SAVE2 ;SAVE P1
MOVE S1,SFLCNT ;GET NUMBER OF ENTRIES
ADDI S1,^D10 ;INCREMENT COUNT
IMULI S1,SFL.SZ ;GET SIZE NEEDED FOR TABLE
$CALL M%GMEM ;GET THE MEMORY
MOVE P1,S2 ;SAVE THE ADDRESS
SKIPN SFLCNT ;ZERO COUNT
JRST ADDP.4 ;YES..UPDATE AND RETURN
MOVE P2,SFLCNT ;GET COUNT OF ENTRIES
IMULI P2,SFL.SZ ;COMPUTE LENGTH OF TABLE
ADD P2,S2 ;GET ENDING ADDRESS OF NEW TABLE
HRL S1,SFLADR ;GET ADDRESS OF OLD TABLE
HRR S1,S2 ;AND ADDRESS OF NEW TABLE
BLT S1,-1(P2) ;MOVE THE TABLE
MOVE S1,SFLCNT ;GET OLD COUNT
IMULI S1,SFL.SZ ;MULTIPLY BY ENTRY SIZE
MOVE S2,SFLADR ;GET OLD ADDRESS
$CALL M%RMEM ;RETURN THE MEMORY
ADDP.4: MOVEM P1,SFLADR ;SAVE NEW ADDRESS
MOVEI S1,^D10 ;GET INCREMENT
ADDM S1,SFLCNT ;SAVE NEW COUNT
ADDM S1,SFLFRE ;SAVE NEW FREE COUNT
$RETT ;RETURN
ADDP.5: AOS SFL.CT(P2) ;INCREMENT THE COUNT
MOVE S1,G$SFPD ;GET THE BAD PID
PJRST ADDRTY ;ADD TO RETRY LIST
$RETT ;RETURN
;P2 SET FROM CHKSFL(CHKS.0)
SUBTTL DELSPL Delete a send failure entry
;THIS ROUTINE WILL REMOVE ENTRY FROM SEND FAILURE PID TABLE
DELSPL: $CALL .SAVE2 ;SAVE TWO ACS
$CALL CHKS.0 ;CHECK AND GET ACS RETURNED
SKIPT ;O.K. ENTRY ADDRESS IN T2
$STOP(DSP,Delete send Failure pid table entry inconsistency)
SETZM SFL.PD(P2) ;CLEAR PID ENTRY
SETZM SFL.CT(P2) ;CLEAR THE COUNT ENTRY
AOS SFLFRE ;BUMP FREE COUNT
$RETT ;RETURN
SUBTTL CHKSFL Check send failure entries
;THIS ROUTINE WILL CHECK FOR PID IN TABLE
;CALL S1/ PID TO CHECK
;
;RETURN TRUE: FOUND ENTRY
;RETURN FALSE: DIDN'T FIND ENTRY
CHKSFL: $CALL .SAVE2 ;GET TWO SCRATCH ACS
CHKS.0: MOVE P1,SFLCNT ;GET NUMBER OF ENTRIES
CAMN P1,SFLFRE ;ARE ANY ENTRIES USED
$RETF ;NO..RETURN FALSE
MOVN P1,P1 ;SETUP AOBJN POINTER
HRLZS P1 ;MAKE AOBJN POINTER
MOVE P2,SFLADR ;GET THE ADDRESS
CHKS.1: CAMN S1,SFL.PD(P2) ;CHECK FOR PID
$RETT ;RETURN TRUE
ADDI P2,SFL.SZ ;GET TO NEXT ENTRY
AOBJN P1,CHKS.1 ;TRY NEXT ONE
$RETF ;COULDN'T FIND
SUBTTL CLRSFL Clear send failure list
;THIS ROUTINE WILL CLEAR TABLE SO WE CAN RECONSTRUCT IT
CLRSFL: SKIPN S1,SFLCNT ;ANY ENTRIES
$STOP(SFI,Send failure table inconsistent)
MOVEM S1,SFLFRE ;RESET FREE COUNT
IMULI S1,SFL.SZ ;COMPUTE SIZE
MOVE S2,SFLADR ;GET THE ADDRESS
PJRST .ZCHNK ;CLEAR AND RETURN
SUBTTL SNDQSR Send a message to QUASAR
;THIS ROUTINE WILL SEND THE APPROPRIATE MESSAGE TO QUASAR
SNDQSR::MOVE S1,G$SND ;GET THE SENDERS PID
STORE S1,.MSCOD(MO) ;SAVE IN MESSAGE
MOVX S1,SP.QSR+SI.FLG ;INDICATE TO QUASAR
STORE S1,SNDBLK+SAB.SI ;IN SAB
SETZM SNDBLK+SAB.PD ;CLEAR PID WORD
MOVEI S2,PAGSIZ ;GET SIZE OF THE MESSAGE
$CALL SNDM.1 ;SEND THE MESSAGE
$RETIT ;OK..RETURN
MOVEI S1,[ASCIZ/QUASAR/] ;GET QUASARS NAME
MOVEM S1,G$ARG1 ;SAVE STRING
PJRST TAKABT ;DO TAKE ABORT
SUBTTL SNDACT Send a message to ACTDAE
TOPS10 <
SNDACT::MOVX S1,SP.ACT+SI.FLG ;SEND TO ACCOUNT DAEMON
STORE S1,SNDBLK+SAB.SI
SETZM SNDBLK+SAB.PD
MOVE S1,G$SND ;GET SENDERS PID
MOVEM S1,.MSCOD(MO) ;STORE AS ACK CODE
MOVEI S2,PAGSIZ ;GET SIZE OF MESSAGE
PJRST SNDM.1 ;SEND IT OFF
>;END TOPS10
SUBTTL SQSD60 Send a message to QUASAR about DN60
IFN FTDN60,<
;This routine sends a DN60 message to QUASAR. It differs from SNDQSR
;only because it sends a message size of 777. This is because a message size
;of 1000 causes the page to be released twice since the main loop thinks
;it is sending messages to multiple operators. UNDERSTAND?
SQSD60::MOVE S1,G$SND ;GET THE SENDERS PID
STORE S1,.MSCOD(MO) ;SAVE IN MESSAGE
MOVX S1,SP.QSR+SI.FLG ;INDICATE TO QUASAR
STORE S1,SNDBLK+SAB.SI ;IN SAB
SETZM SNDBLK+SAB.PD ;CLEAR PID WORD
MOVEI S2,777 ;Size that forces retention of page
$CALL SNDM.1 ;SEND THE MESSAGE
$RETIT ;OK..RETURN
MOVEI S1,[ASCIZ/QUASAR/] ;GET QUASARS NAME
MOVEM S1,G$ARG1 ;SAVE STRING
PJRST TAKABT ;DO TAKE ABORT
>;end FTDN60
SUBTTL SNDMSG Send a message to a specific PID
;ON ENTRY S1=PID TO SEND TO
; S2 = LENGTH OF MESSAGE (1000 IMPLIES A PAGE MODE SEND)
; MO=ADDRESS OF MESSAGE BLOCK
SNDMSG: STORE S1,SNDBLK+SAB.PD ;SAVE IN ARG BLOCK
SETZM SNDBLK+SAB.SI ;NOT TO SPECIAL PID
SNDM.1: STORE S2,SNDBLK+SAB.LN ;SAVE LENGTH IN SAB
STORE MO,SNDBLK+SAB.MS ;SAVE ADDRESS IN ARG BLOCK
IFN FTDN60,<
HLRZ T1,SNDBLK+SAB.PD ;GET THE PID
CAIE T1,-1 ;CHECK FOR -1
JRST SNDM.2 ;DN60 ACK/WTO
MOVE T1,G$OPRA ;GET THE OPR ADDRESS
MOVX S1,OP.D60 ;GET D60 FLAG
TDNN S1,OPR.FL(T1) ;IS IT A DN60 MESSAGE?
JRST SNDM.2 ;NO.. DO NORMAL IPCF SENDING
MOVE S1,OPR.ND(T1) ;GET NODE ADDRESS
MOVE S1,NOD.NM(S1) ;GET NODE NAME
; MOVE S1,OPR.PL(T1) ;GET THE PORT LINE WORD
MOVEM S1,G$SND ;SAVE AS RETURN CODE
MOVEI S1,.OMDSP ;MAKE SURE DISPLAY TYPE
STORE S1,.MSTYP(MO),MS.TYP ;SAVE THE TYPE
PJRST SQSD60 ;SEND IT TO QUASAR
>;END FTDN60
SNDM.2: SETZM PAGFLG ;CLEAR A FLAG
MOVE T1,SNDBLK+SAB.LN ;GET THE LENGTH
CAIE T1,PAGSIZ ;GET THE PAGE SIZE
JRST SNDM.3 ;NO..SEND AS IS
LOAD T1,.MSTYP(MO),MS.CNT ;GET MESSAGE LENGTH
CAMLE T1,G$MAXP ;CAN WE SEND A PACKET
JRST SNDM.3 ;NO..
SETOM PAGFLG ;SET THE FLAG
MOVEM T1,SNDBLK+SAB.LN ;RESET THE LENGTH
SNDM.3: MOVX S1,SAB.SZ ;GET LENGTH IN S1
MOVEI S2,SNDBLK ;AND ADDRESS IN S2
$CALL C%SEND ;SEND THE MESSAGE
$RETIF ;ERROR..RETURN
SKIPE PAGFLG ;WAS IT A PAGE?
$CALL RELPAG ;YES..RELEASE THE PAGE
$RETT
SUBTTL SPDOPR Send a message to an OPR
;THIS ROUTINE WILL SEND MESSAGE TO AN OPR AND REQUEUE ON A
;FAILURE
SPDOPR: SETZM RSDCNT ;CLEAR RESEND COUNT
$CALL CHKSFL ;CHECK SEND FAILURES
JUMPT SPDO.0 ;REQUEUE MESSAGE
$CALL SNDMSG ;SEND THE MESSAGE
$RETIT ;O.K..JUST RETURN
CAXN S1,ERNSP$ ;NO SUCH PID?
JRST SPDO.3 ;YES..DELETE OPR AND RELEASE MESSAGE
MOVE S1,SNDBLK+SAB.PD ;GET THE PID
SPDO.0: $CALL ADDSFL ;ADD PID TO SEND FAILURE LIST
SPDO.1: MOVX S1,R.SOPR ;SETUP AS OPR RESEND
SPDO.2: SKIPN G$RSDC ;FIRST MESSAGE TO BE RESENT?
JRST [PUSH P,S1 ;YES..PRESERVE S1
$CALL REQRSD ;REQUEST RESEND
POP P,S1
JRST .+1]
AOS G$RSDC ;BUMP THE RESEND COUNT
MOVE S2,G$RSDL ;GET THE RESEND LIST
$CALL REQMSG ;REQUEUE THE MESSAGE
PJRST RELPAG ;RELEASE THE PAGE AND RETURN
SPDO.3: MOVE S1,SNDBLK+SAB.PD ;GET THE PID
$CALL VALOPR ;VALIDATE THE OPR
SKIPT ;CONTINUE
$STOP(ODI,OPR database inconsistent)
MOVE S1,SNDBLK+SAB.PD ;GET THE PID
$CALL DELOPR ;DELETE THE OPR
$CALL RELPAG ;RELEASE THE PAGE
$RETF ;AND RETURN FALSE
SUBTTL SNDPID Send a message to any PID (not OPR)
;THIS ROUTINE WILL SEND MESSAGE TO ANY PID AND REQUEUE ON FAILURE
SNDPID: SETZM RSDCNT ;CLEAR RSDCNT
$CALL CHKSFL ;CHECK SEND FAILURE TABLE
JUMPT SNDP.1 ;REQUEUE THE MESSAGE
$CALL SNDMSG ;SEND THE MESSAGE
$RETIT ;OK..RETURN
CAXN S1,ERNSP$ ;NO SUCH PID
$RETF ;RETURN FALSE..NO SUCH PID
MOVE S1,SNDBLK+SAB.PD ;GET THE PID
SNDP.1: $CALL ADDSFL ;ADD SEND FAILURE LIST
SNDP.2: SETZ S1, ;NO FLAGS
PJRST SPDO.2 ;REQUEUE MESSAGE AND RETURN
SUBTTL Interrupt Handler
INT: $BGINT IPCLEV
$CALL C%INTR ;SIGNAL THE INTERRUPT
$DEBRK
SUBTTL Default PDBs for OPRCMD
IFN FTDN60,<
TXTLIN::MOVEI S2,[ASCIZ/Multiple line text not allowed for remote operators/]
$RETF
WAITAC:: MOVEI S2,[ASCIZ/Wait command not allowed for remote operators/]
$RETF
TAKOPR::
ENTFDB::
WAIOPR::
EXTFDB::$CRLF(<$PREFILL(BADFDB)>)
SETTRM::
SETRTN::
PUSHRT::
BADFDB: MOVEI S2,[ASCIZ/Command invalid for remote operators/]
$RETF
CMDACT::$RETT
>;END FTDN60
SUBTTL SETOUT Setup output of data
;THIS ROUTINE WILL SETUP A DISPLAY MESSAGE FOR A DN60 OPERATOR
IFN FTDN60,<
SETOUT:: $CALL SETPTR ;SETUP THE POINTER
MOVEM S1,WTOPTR ;SAVE THE POINTER
$TEXT (,<^M^J^N/G$HOST/::^A>) ;OPR HEADER LINE
$RET ;RETURN
SUBTTL SNDOUT Output routines for DN60
;THIS ROUTINE WILL SEND DATA TO QUASAR FOR OUTPUT TO DN60
SNDOUT:: MOVX S1,0 ;GET A NULL
IDPB S1,WTOPTR ;END WITH A NULL
HRRZ S1,WTOPTR ;GET END ADDRESS
ADDI S1,1 ;BUMP IT BY 1
ANDI S1,777 ;GET MESSAGE LENGTH
STORE S1,.MSTYP(MO),MS.CNT ;SAVE THE COUNT
SUBI S1,.OHDRS ;GET THE BLOCK SIZE
STORE S1,.OHDRS+ARG.HD(MO),AR.LEN ;SAVE THE BLOCK LENGTH
MOVX S1,.CMTXT ;GET TEXT TYPE
STORE S1,.OHDRS+ARG.HD(MO),AR.TYP ;SAVE THE TYPE
MOVE S1,G$SND ;PID TO SEND TO
MOVEI S2,PAGSIZ ;GET PAGE SIZE
PJRST SNDPID ;SEND TO QUASAR VIA PID
SUBTTL OUTRTN Output routine for links
;THIS IS THE TEXT DEFAULT OUTPUT ROUTINE AND WILL SETUP DATA FOR THE
;LINKS
OUTRTN: SOSG WTOCNT ;ROOM LEFT
JRST OUTR.1 ;NO..SEND AND MAKE ROOM
IDPB S1,WTOPTR ;SAVE THE BYTE
$RETT ;RETURN TRUE
OUTR.1: PUSH P,S1 ;SAVE THE BYTE
$CALL SNDOUT ;SEND THE OUTPUT
$CALL SETPTR ;RESET THE POINTERS
MOVEM S1,WTOPTR ;SAVE THE POINTER
POP P,S1 ;RESTORE THE VALUE
JRST OUTRTN ;SAVE THE CHARACTER NOW
SUBTTL SETPTR Setup pointers for output
;THIS ROUTINE WILL SETUP THE POINTERS AND RETURN WITH S1 CONTAINING
;THE NEW BYTE POINTER
SETPTR: $CALL GETPAG ;GET A PAGE
MOVX S1,.OMDSP ;GET MESSAGE TYPE
STORE S1,.MSTYP(MO),MS.TYP ;SAVE THE MESSAGE TYPE
MOVEI S1,<PAGSIZ-<.OHDRS+ARG.DA+1>>*5 ;GET ROOM FOR DATA
MOVEM S1,WTOCNT ;SAVE THE COUNT
MOVE S1,G$OPRA ;GET OPR ADDRESS
MOVE S1,OPR.ND(S1) ;GET THE PORT LINE DATA
MOVE S1,NOD.NM(S1) ;GET THE NODE NAME
MOVEM S1,.MSCOD(MO) ;SAVE THE CODE IN THE MESSAGE
MOVSI S1,(POINT 7,) ;SETUP THE BYTE POINTER
HRRI S1,.OHDRS+ARG.DA(MO) ;GET BUFFER ADDRESS
$RET ;RETURN S1 BYTE POINTER
SHWDAY:: $CALL SETOUT ;SETUP THE OUTPUT
$TEXT (,<^H/[-1]/>)
$CALL SNDOUT ;SEND THE OUTPUT
PJRST P$NPRO## ;NO PROCESSING REQUIRED
>;END FTDN60
$STOP(DBC,DeBug Crash - Keep this crash)
END ORION