Trailing-Edge
-
PDP-10 Archives
-
BB-Y393D-SM
-
monitor-sources/boot.mac
There are 59 other files named boot.mac in the archive. Click here to see a list.
;<4-1-FIELD-IMAGE.MONITOR>BOOT.MAC.2, 25-Feb-82 20:08:41, EDIT BY DONAHUE
;UPDATE COPYRIGHT DATE
; UPD ID= 313, FARK:<4-WORKING-SOURCES.MONITOR>BOOT.MAC.2, 7-Dec-80 18:59:27 by ZIMA
;Edit 137 - Handle uninitialized memory:
; Put BLT of 20-23 under conditional for KL only
; Do DBE scan for low 256K at GOTCOR
; Do DBE scan for high memory at SETEP2
; UPD ID= 119, FARK:<4-WORKING-SOURCES.MONITOR>BOOT.MAC.6, 14-Jul-80 01:13:29 by ZIMA
;TCO 5.1095 - Fix BOOT to handle uninitialized memory instead of hanging. [136]
; UPD ID= 117, FARK:<4-WORKING-SOURCES.MONITOR>BOOT.MAC.5, 6-Jul-80 19:49:04 by ZIMA
;TCO 5.1046 - Interim fix for KS10 BOOT/MTBOOT hanging, clear KLINIK
; output word during startup.
; UPD ID= 116, FARK:<4-WORKING-SOURCES.MONITOR>BOOT.MAC.3, 6-Jul-80 01:36:49 by ZIMA
;TCO 5.1045 - Fix typo in MTBOOT prompt.
; UPD ID= 115, FARK:<4-WORKING-SOURCES.MONITOR>BOOT.MAC.2, 6-Jul-80 01:32:44 by ZIMA
;TCO 5.1044 - Fix typo in SETZM'ing 20-23.
;<4.MONITOR>BOOT.MAC.62, 30-Jan-80 08:14:16, EDIT BY ENGEL
;FIX NCSTPG FOR KS
;<4.MONITOR>BOOT.MAC.61, 3-Jan-80 08:08:19, EDIT BY R.ACE
;UPDATE COPYRIGHT DATE
;<4.MONITOR>BOOT.MAC.60, 18-Oct-79 16:57:29, EDIT BY DBELL
;TCO 4.2534 - DON'T LOAD DX20 MICROCODE IF DUMPING CORE OR AUTO-RELOADING
;<4.MONITOR>BOOT.MAC.59, 11-Oct-79 13:47:20, EDIT BY ENGEL
;MOVE PDL AWAY FROM LODTYP
;<4.MONITOR>BOOT.MAC.58, 5-Oct-79 16:55:50, EDIT BY ENGEL
;CHANGE EDDT TO KDDT IN LINK EXAMPLE
;<4.MONITOR>BOOT.MAC.55, 19-Jul-79 07:48:02, EDIT BY ENGEL
;<4.MONITOR>BOOT.MAC.54, 18-Jul-79 16:49:09, EDIT BY ENGEL
;ADD HELP TEXT TO DEBUGGING BOOT WITH EDDT
;<4.MONITOR>BOOT.MAC.53, 16-Jul-79 10:27:21, EDIT BY ENGEL
;ALLOW SYSTEM TO BOOT WHEN DX20 IS BAD
;<4.MONITOR>BOOT.MAC.52, 6-Jul-79 10:02:15, EDIT BY ENGEL
;<4.MONITOR>BOOT.MAC.51, 5-Jul-79 13:21:23, EDIT BY ENGEL
;FIX NCSTPG
;<4.MONITOR>BOOT.MAC.50, 2-Jul-79 09:04:45, EDIT BY ENGEL
;ADD HINTS FOR HOW TO DEBUG WITH EDDT
;<4.MONITOR>BOOT.MAC.49, 27-Jun-79 15:48:54, Edit by KONEN
;PRINT MTBOOT PROMPT
;<4.MONITOR>BOOT.MAC.48, 25-Jun-79 16:41:08, EDIT BY ENGEL
;DEFEND AGAINST MEMORY PARITY IN LOCATIONS 20-23
;<4.MONITOR>BOOT.MAC.47, 22-Jun-79 14:30:16, EDIT BY ENGEL
;ADD HIGH CORE SAVING AND RUBOUT CHANGES
;<4.MONITOR>BOOT.MAC.46, 10-Jun-79 14:44:37, Edit by MCLEAN
;<4.MONITOR>BOOT.MAC.45, 10-Jun-79 14:33:47, Edit by MCLEAN
;MOVE DECISION ON LOAD TYPE FOR BOOT OF SM FOR MORE ROOM
;<4.MONITOR>BOOT.MAC.44, 4-MAR-79 14:35:04, EDIT BY KONEN
;UPDATE COPYRIGHT FOR RELEASE 4
;<4.MONITOR>BOOT.MAC.43, 26-JAN-79 22:31:45, EDIT BY MCLEAN
;GET CORRECT NUMBER OF CYLS PER UNIT FOR RP07
;<4.MONITOR>BOOT.MAC.42, 26-JAN-79 22:25:14, EDIT BY MCLEAN
;ADD RP07
;<4.MONITOR>BOOT.MAC.41, 17-JAN-79 14:53:26, EDIT BY DBELL
;PUT IN THE SYMBOL A%VFST FOR THE FIRST ADDRESS OF BOOT, AND FIX
;TSTPAG AND SETLCV TO USE IT.
;<4.MONITOR>BOOT.MAC.40, 16-JAN-79 10:05:44, EDIT BY DBELL
;FIX TSTADR TO USE VFREE CORRECTLY.
;<4.MONITOR>BOOT.MAC.39, 15-JAN-79 10:34:32, EDIT BY DBELL
;TCO 4.2154 - MAKE THE UPPER LIMIT ON LOADING VARY ACCORDING TO .JBSYM,
; AND ADD THE /A SWITCH TO FORCE LOADING OF ALL OF A PROGRAM. CLEAN UP
; THE PAGE DEFINITIONS. EXTEND LOADING RANGE FROM 377 TO BOOT ITSELF.
;<4.MONITOR>BOOT.MAC.37, 7-NOV-78 18:12:26, EDIT BY MCLEAN
;FIX SAVING IF GT 512 K
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY ONLY BE USED
; OR COPIED IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
;COPYRIGHT (C) 1976,1977,1978,1979,1980,1981,1982 BY DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
TITLE BOOT - DISK AND TAPE BOOTSTRAP
SUBTTL L.BOSACK 23-SEP-73 (OLD, OLD ORIGINAL)
SALL
SEARCH MONSYM,MACSYM
V%WHO==0
V%MAJOR==10
V%MINOR==0
V%EDIT==^D137
REPEAT 0,<<<<
EEEEEEEEEEEEEEE DDDDDDDDDDDD DDDDDDDDDDDD TTTTTTTTTTTTTTT
EEEEEEEEEEEEEEE DDDDDDDDDDDD DDDDDDDDDDDD TTTTTTTTTTTTTTT
EEEEEEEEEEEEEEE DDDDDDDDDDDD DDDDDDDDDDDD TTTTTTTTTTTTTTT
EEE DDD DDD DDD DDD TTT
EEE DDD DDD DDD DDD TTT
EEE DDD DDD DDD DDD TTT
EEE DDD DDD DDD DDD TTT
EEE DDD DDD DDD DDD TTT
EEE DDD DDD DDD DDD TTT
EEEEEEEEEEEEEEE DDD DDD DDD DDD TTT
EEEEEEEEEEEEEEE DDD DDD DDD DDD TTT
EEEEEEEEEEEEEEE DDD DDD DDD DDD TTT
EEE DDD DDD DDD DDD TTT
EEE DDD DDD DDD DDD TTT
EEE DDD DDD DDD DDD TTT
EEE DDD DDD DDD DDD TTT
EEE DDD DDD DDD DDD TTT
EEE DDD DDD DDD DDD TTT
EEEEEEEEEEEEEEE DDDDDDDDDDDD DDDDDDDDDDDD TTT
EEEEEEEEEEEEEEE DDDDDDDDDDDD DDDDDDDDDDDD TTT
EEEEEEEEEEEEEEE DDDDDDDDDDDD DDDDDDDDDDDD TTT
NOW THAT I HAVE YOUR ATTENTION, HERE ARE A FEW HINTS ON DEBUGGING BOOT
WITH EDDT. THE FIRST THING THAT NEEDS TO BE DONE IS TO CREATE AN .EXE FILE
WITH BOTH BOOT AND EDDT IN IT. THIS CRITICAL STEP IS DONE WITH LINK
AND WOULD LOOK SOMETHING LIKE THE EXAMPLE BELOW. TO ASSEMBLE BOOT
WITH PROPER DEBUGGING INSTRUCTIONS FOLLOW THE INSTRUCTIONS AT SETPTB.
NOW FOR HOW TO LINK IT:
@LINK
*/SET:.LOW.:40000
*/SET:INCOD:300000
*BOOT,KDDT,DXMCA.RDX/G
@SAVE BOOT.EXE
THE .LOW. PSECT IS BOOT. PSECT INCOD IS EDDT. THE ABOVE LINK COMMANDS LOAD
EDDT AT 300000 AND BOOT AT 40000. DXMCA.RDX IS THE TU70 MICROCODE AND
NEEDS TO BE LINKED EVEN IF YOU HAVE NO TU70.
STEP NUMBER TWO IS TO GET THE SYSTEM TO THE POINT WHERE IT HAS TYPED "BOOT>"
AT YOU (I.E. KLI AND FRIENDS). ASSUMING YOU ARE USING DIRECTORY <ENGEL>
THE FOLLOWING IS A TYPICAL EXAMPLE OF HOW TO LOAD THE BOOT BEING DEBUGGED:
BOOT><ENGEL>BOOT.EXE/L
BOOT>/G300000
EDDT
NOW YOU ARE IN EDDT AND CAN ACCESS ANY OF BOOT'S SYMBOLS THAT OCCUR BEFORE
FNDDEV. THERE ARE COUPLE OF TRICKY MANEUVERS TO GET TO FNDDEV.
ONCE AT FNDDEV YOU CAN USE ALL THE SYMBOLS AFTER FNDDEV.
THE FOLLOWING IS AN ATTEMPT TO STEP YOU THROUGH ALL OF THAT.
BUT FIRST, A FEW WORDS ABOUT THE GENERAL FLOW OF IT ALL.
BOOT DROPS IN TO WHEREVER YOU SET .LOW. (E.G. 40000). AT GOTCOR IT MOVES
ITSELF TO HIGH CORE WHILE MOVING HIGH CORE TO WHERE BOOT DROPPED IN. THIS
LITTLE GOODY CAUSES ALL THE SYMBOLS TO POINT TO INCORRECT ADDRESSES, FOR A SHORT
TIME. THE CODE THAT MOVES ALL THIS STUFF AROUND RUNS IN THE ACS. BOOT ALSO BUILDS MAPS
FOR THE ULTIMATE "CONO PAG," THAT STARTS THE MAPPING. ONE OF THESE MAPS
IS BUILT AT SETPTB. THERE IS A COMMENT THERE ABOUT HOW TO ASSEMBLE BOOT
TO GET IT TO BUILD A 256K MAP (THEREBY MAPPING EDDT INTO THE
MAPPED BOOT SPACE). ONCE BOOT HAS MAPPED ITSELF YOU CAN USE ALL THE SYMBOLS
PAST FNDDEV AND SET BREAKPOINTS AS FREELY AS YOU LIKE. WHAT FOLLOWS IS A
COOKBOOK APPROACH TO GETTING TO FNDDEV.
(WHEN WE LAST SAW THE COMPUTER IT HAD TYPED EDDT AT US. WE WILL CONTINUE FROM
THERE.)
1. SET A BREAKPOINT AT GOTCOR+10. THIS IS A JRST 1 TO THE CODE THAT MOVES BOOT
TO HIGH CORE.
2. TYPE ENT$G TO START BOOT.
3. AT THE BREAKPOINT SET A NEW BREAKPOINT AT AC 7 (I.E. 7$B).
4. TYPE $P
5. YOU HAVE HIT THE SECOND BREAKPOINT. NOW SET THE THIRD. SET THIS
BREAKPOINT AT 774000+TOP2-ENT (I.E. 774000+TOP2-ENT$B).
6. TYPE THREE (3) ALT X'S ($X) TO GET PAST THE CONO PAG, TO FNDDEV.
7. YOU ARE NOW AT FNDDEV. GET RID OF THE THREE BREAKPOINTS YOU SET.
THIS STEP IS VERY IMPORTANT AS YOU HAVE SET A BREAKPOINT IN THE ACS.
THUS, YOU HAVE TO TYPE 0$1B 0$2B 0$3B.
8. FROM HERE ON IT IS JUST LIKE MONITOR DEBUGGING. GOOD LUCK.
>
;ASSEMBLY PARAMETERS
IFNDEF PORG,<PORG==^D64*^D512> ;PHYSICAL ORIGIN OF CODE
IFNDEF FT.RP,<FT.RP==0> ;SUPPORT FOR RP10 (0 IMPLIES RH20 OR RH10)
IFNDEF FT.UDB,<FT.UDB==0> ;USER MODE DEBUG
IFNDEF FT.MTA,<FT.MTA==0> ;MAG TAPE PART 2 IF NONZERO
IFNDEF FT.EXE,<FT.EXE==1> ;LOAD EXE FORMAT FILES
IFNDEF FT.PRT,<FT.PRT==3> ;0 - JUST GLOBALS FOR SWPMON
;1 = STANDALONE PART 1
;2 = PART 2
;3 = STANDALONE PART 1&2
IFN KLFLG,< ;ONLY ALLOW DX20 CODE IF KL10
IFNDEF FT.DX2,<FT.DX2==1> ;DX20/TU7X CODE IF NONZERO
> ;END IFN KLFLG
IFE KLFLG,<
IFNDEF FT.DX2,<FT.DX2==0> ;DX20/TU7X CODE IF NONZERO
> ;END IFE KLFLG
;PROCESSOR (ETC.) BITS
AP.RES==1B19 ;IOB RESET (SAME ON KI AND KL)
PGCLKE==1B18 ;CACHE LOOK
PGCLDE==1B19 ;CACHE LOAD
PGKLPG==1B21 ;KL PAGE
AP.CLR==1B22
AP.SET==1B23
IFE SMFLG,<
AP.NXM==1B25
>
IFN SMFLG,<
AP.INE==1B25 ;INTERRUPT 8080
AP.NXM==1B27
>
AP.RNX==AP.CLR!AP.NXM
IMMPTR==1B2!1B4!1B6 ;IMMEDIATE PAGE POINTER.
;STATE TABLE DEFINATION
;
STTSIZ==^D25 ;SIZE OF STATE TABLE
RH0==540
ICA==0 ;INITIAL CHANNEL CONTROL WORD ADDRESS IN EPT
.RHRAE==1B24 ;REGISTER ACCESS ERROR
.RHMBR==1B25 ;MASSBUS RESET
.RHCTE==1B26 ;CLEAR TRANSFER ERROR
.RHMBE==1B27 ;MASSBUS ENABLE
.RHCLP==1B28 ;RESET CLP
.RHAIE==1B30 ;ATTENTION INTERRUPT ENABLE
.RHSTP==1B31 ;STOP TRANSFER
.RHDON==1B32 ;DONE
.RHSBR==70B5 ;SBAR
.RHSTR==71B5 ;STCR
.RHIVR==74B5 ;INTERRUPT VECTOR REGISTER
.TMCSR==00B5 ;CONTROL REG.
.TMRDF==71 ;READ FORWARD AND GO
.TMBSF==33 ;BACKSPACE BLOCK
.TMRWF==07 ;REWIND
.TMDSR==01B5 ;DEVICE STATUS REG
.TMERR==02B5 ;ERROR REGISTER
TMSPIP==20000
TMSMOL==10000 ;MEDIUM ON LINE(TELL YOU FORTUNE, 10KCS?)
TMSDRY==200 ;DRIVE/FORMATTER READY
TMSIDB==10 ;PE ID BURST SEEN
.TMATR==04B5 ;ATTENTION SUMMARY REGISTER
.TMFCR==05B5 ;FRAME COUNT REG.
.TMDTR==06B5 ;DRIVE TYPE REG.
.TMTCR==11B5 ;TAPE CONTROL REG.
TMCD8==1400 ;800 BPI
TMCD16==2000 ;1600 BPI
;DX20 ONLY
;
.DXTYP==60 ;DX20 DEVICE TYPE CODE
.TDSTR==20B5 ;DRIVE STATUS/STATUS INDEX
.TDDEB==1B25 ;DEVICE END
.TDDNR==21B5 ;DRIVE NUMBER, DRIVE MODE, DATA MODE
.TDMOD==1B23!14B27 ;1600 BPI, CORE DUMP MODE
.TDTER==23B5 ;TRACK IN ERROR, FLAGS
.TDE0R==26B5 ;EXTENDED STATUS REG 0
.TDMNR==3B5 ;MAINTENANCE REGISTER
.TDSCB==1B31 ;SINGLE CYCLE THE DX20
.TDSTB==1B33 ;START DX20
.TDSTR==20B5 ;ENDING STATUS
.TDTCR==21B5 ;CONTROL REGISTER
.TDFLR==23B5 ;FLAGS
.TDAYR==24B5 ;ASYNCHRONOUS STATUS
.TDE0R==26B5 ;EXTENDED STATUS REGISTER 0
.TDE1R==27B5 ;EXTENDED STATUS REGISTER 1
.TDIRR==30B5 ;IR REGISTER
.TDPCR==31B5 ;PC REGISTER
.TDICB==1B20 ;ENABLE IR FROM CRAM
.TDCIB==1B21 ;ENABLE CRAM FROM IR
.TDPEB==1B22 ;ENABLE PC LOAD
.TDPIB==1B23 ;ENABLE PC AUTO INCREMENT
.TDIBR==36B5 ;IBUS AND BR REGISTER
.TDATB==1B20 ;ATTENTION
.TDCEB==1B21 ;COMPOSITE ERROR BIT
.TDMPR==1B23 ;MICROPROCESSOR RUNNING BIT
LR==1B6 ;LOAD REGISTER
GO==1B35 ;GO BIT IN CONTROL REGISTER
RCLP==1B7 ;RESET CLP (IN DATAO)
STLW==1B10 ;STORE LOGOUT STATUS WORDS (IN DATAO)
; RP04 DEVICE REGISTERS
R4%CSR==00B5 ;DEVICE CONTROL REGISTER
R4%DSR==01B5 ;DEVICE STATUS REGISTER
R4%ERR==1B20 ;COMPOSITE ERROR BIT
R4%DRY==1B28 ;DRIVE READY FLAG
R4%ATN==04B5 ;RP04 PSEUDO-ATTENTION REGISTER
R4%DST==05B5 ;DESIRED SECTOR/TRACK REGISTER
R4%DTR==06B5 ;DRIVE TYPE REGISTER
R4%DCA==12B5 ;DESIRED CYLINDER REGISTER
RH%XFR==40B5 ;RH INITIATE DATA TRANSFER REGISTER
R4%TYP==777B35 ;DEVICE TYPE FIELD IN TYPE REGISTER
.R4TYP==20 ;RP04 DEVICE TYPE CODE
.R5TYP==21 ;RP05 DEVICE TYPE CODE
.R6TYP==22 ;RP06 DEVICE TYPE CODE
.R7TY1==40 ;RP07 FIXED TYPE
.R7TY2==41 ;RP07 MOV TYPE
.R3TYP==24 ;RM03 DEVICE TYPE CODE
R4%CSK==02B34 ;RP04 SEEK FUNCTION
R4%CRC==03B34 ;RE-CALIBRATE FUNCTION IN CONTROL REGISTER
R4%CDC==04B34 ;RP04 DRIVE CLEAR FUNCTION
R4%RIP==10B34 ;READ-IN PRESET FUNCTION
R4%CPA==11B34 ;PACK ACKNOWLEDGE FUNCTION IN CONTROL REGISTER
R4%CWR==30B34 ;RP04 WRITE FUNCTION
R4%CRD==34B34 ;RP04 READ FUNCTION
RHERR==775120 ;RH10 CONI ERROR BITS
NRETRY==5 ;NUMBER OF TIMES TO RETRY
TIMOUT==^D50000 ;COUNT FOR SOJG TIMEOUT
IFE SMFLG,<
MAXCHN==7 ;MAX # OF CHANNELS
>
IFN SMFLG,<
MAXCHN==2 ;MAX # OF CHANNELS
>
MAXDRV==7 ;MAX NUMBER OF DRIVES/CHANNEL
; INDEX BLOCK ADDRESS DEFINITIONS
STGADM==<MASKB 12,35> ;MASK FOR STORAGE ADDRESS
MSKSTR IDXADR,,STGADM ;STORAGE ADDR MASK
; EXE FILE DEFINITIONS
.EXDIR==1776 ;DIRECTORY BLOCK TYPE
.EXEND==1777 ;END BLOCK TYPE
.EXENT==1775 ;ENTRY BLOCK TYPE
.EXVER==1774 ;VERSION BLOCK TYPE
; JOB DATA DEFINITIONS
.JBSYM==116 ;SYMBOL TABLE POINTER
; STRUCTURE DEFINITIONS
DEFSTR (DIDIR,A%FP0,17,18) ;DIRECTORY BLOCK TYPE (=.EXDIR)
DEFSTR (DISIZ,A%FP0,35,18) ;SIZE OF DIRECTORY BLOCK
DEFSTR (DIFLG,0,8,9) ;FLAGS
DEFSTR (DI%WRT,0,2,1) ;WRITE ACCESS ALLOWED BIT
DEFSTR (DIFIL,0,35,27) ;FILE PAGE NUMBER
DEFSTR (DIRPT,1,8,9) ;REPEAT COUNT
DEFSTR (DIPRO,1,35,27) ;PROCESS PAGE NUMBER
DEFSTR (VBTYP,0,17,18) ;ENTRY VECTOR BLOCK TYPE (=.EXENT)
DEFSTR (VBSIZ,0,35,18) ;SIZE OF ENTRY VECTOR BLOCK (=.VBSIZ)
DEFSTR (VBCNT,1,35,36) ;ENTRY VECTOR COUNT
DEFSTR (VBADR,2,35,36) ;ADDRESS OF ENTRY VECTOR
DEFSTR (EBTYP,0,17,18) ;BLOCK TYPE CODE FOR END BLOCK (=.EXEND)
DEFSTR (EBSIZ,0,35,18) ;SIZE OF END BLOCK
.DISIZ==2 ;SIZE OF DESCRIPTORS
.EBSIZ==1 ;SIZE OF END BLOCK
.VBSIZ==4 ;SIZE OF ENTRY VECTOR BLOCK
; DEFAULT SIZE AND ADDRESS OF ENTRY VECTOR IN DUMP FILE
EVADR==140 ;DEFAULT STARTING ADDRESS
EVLEN==1 ;DEFAULT LENGTH OF VECTOR
;RH11 EXTERNAL PAGE DEFINITIONS
R0%CS1==1776700 ;CONTROL AND STATUS 1
R0%WC==1776702 ;WORD COUNT REGISTER
R0%BA==1776704 ;UNIBUS ADDRESS REGISTER
R0%DA==1776706 ;DESIRED SECTOR/TRACK ADDRESS REGISTER
R0%CS2==1776710 ;CONTROL AND STATUS 2
R0%DS==1776712 ;DRIVE STATUS REGISTER
R0%ER1==1776714 ;ERROR REGISTER 1
R0%AS==1776716 ;ATTENTION SUMMARY REGISTER
R0%DT==1776726 ;DRIVE TYPE REGISTER
R0%SN==1776730 ;SERIAL NUMBER REGISTER
R0%DC==1776734 ;DESIRED CYLINDER REGISTER
R0%ER2==1776740 ;ERROR REGISTER 2
R0%ER3==1776742 ;ERROR REGISTER 3
;SECOND RH11 DEFINITONS
R1%CS1==3772440 ;CONTROL AND STATUS 1
R1%WC==3772442 ;WORD COUNT REGISTER
R1%BA==3772444 ;UNIBUS ADDRESS REGISTER
R1%DA==3772446 ;DESIRED SECTOR/TRACK ADDRESS REGISTER
R1%CS2==3772450 ;CONTROL AND STATUS 2
R1%DS==3772452 ;DRIVE STATUS REGISTER
R1%ER1==3772454 ;ERROR REGISTER 1
R1%AS==3772456 ;ATTENTION SUMMARY REGISTER
R1%DT==3772466 ;DRIVE TYPE REGISTER
R1%SN==3772470
R1%DC=3772472 ;DESIRED CYLINDER REGISTER
R1%ER2==3772474 ;ERROR REGISTER 2
R1%ER3==3772476 ;ERROR REGISTER 3
;
; DEVICE BIT DEFINITIONS FOR RH11
RH.NED==1B23 ;NON EX DISK
RH1SC==100000 ;SPECIAL CONDITIONS
RH1TRE==040000 ;TRE ERROR
RH1RDY==000200 ;READY
RH1IE==000100 ;INTERRUPT ENABLE
RH1CLR==000040 ;CLEAR CHANNEL
RPPGSZ==2000 ;PAGE SIZE FOR 11 TRANSFER
UNBMP0==1763000 ;ADDRESS OF UNIBUS MAP
UNBMP1==3763000 ;UNIBUS MAP
UNVBIT==40000 ;VALID BIT FOR UNIBUS
UN36B==100000 ;36 BIT TRANSFER MODE
;
; TTY DEFINITIONS
;
CTYIRD=1B27 ;INPUT READY
CTYIWD=32 ;ADDRESS OF INPUT WORD
CTYORD=1B27 ;OUTPUT READY
CTYOWD=33 ;OUTPUT WORD
;**;[5.1046] Add one line at CTYOWD=33 +1L JGZ 6-JUL-80
KLIOWD=35 ;[5.1046] KS KLINIK OUTPUT WORD
RELWD=31 ;RELOAD WORD
RLFLGS=1B34 ;FLAGS THAT CAUSE RELOADS AND DUMPS
RSFLGS=1B32 ;RESTART FLAG
CTIRDY=00200 ;RECEIVE READY
CTORDY=100000 ;TRANSMIT READY
CTYIST=760010 ;STATUS REGISTER
CTIDAT=760012 ;INPUT BUFFER
CTYLPR=760012 ;LINE PARAMETER REGISTER
CTYTCR=760014 ;TRANSMIT CONTROL
CTODAT=760016 ;OUTPUT DATA BUFFER
CTYCLR=20 ;RESET DZ11
CTYSCE=40 ;ENABLE SCANNER
CTYBUD=17270 ;9600 BAUD 1 STOP BIT
;MACRO TO PERFORM IO OPERATIONS - USE IS INDEPENDENT OF WHICH DISK
;MACRO DEFINITION FOR RP10
IFN FT.RP,<
DEFINE IOOP(OP,OPR)
<IFIDN <OP><CLEAR>,<
CALL IOXCT
DATAO DPC,[XWD 500000,776]
> ;END IFIDN CLEAR
IFIDN <OP><SKIPNOERR>,<
CALL IOXCT
CONSZ DPC,177720 ;ANY ERROR?
> ;END IFIDN SKIPNOERR
IFIDN <OP><XCTOP>,<
CALL IOXCT
DATAO DPC,OPR ;EXECUTE OP
> ;END IFIDN XCTOP
IFIDN <OP><SKIPDONE>,<
CALL IOXCT
CONSO DPC,10 ;SKIP IF DONE
> ;END IFIDN SKIPDONE
> ;END DEFINE IOOP
> ;END IFN FT.RP
; MACRO DEFINITION FOR RP04
IFE FT.RP,<
DEFINE IOOP(OP,OPR)
<IFIDN <OP><CLEAR>,<
CALL IOXCT
CONO .-.,2000
CALL IOXCT
CONO .-.,4600
> ;END IFIDN CLEAR
IFIDN <OP><SKIPNOERR>,<
CALL IOXCT
CONSZ .-.,RHERR ;RH ERROR BITS
> ;END IFIDN SKIPNOERR
IFIDN <OP><XCTOP>,<
CALL IOXCT
DATAO .-.,OPR ;EXECUTE OP
> ;END IFIDN XCTOP
IFIDN <OP><SKIPDONE>,<
CALL IOXCT
CONSO .-.,.RHDON ;SKIP IF DONE
> ;END IFIDN SKIPDONE
> ;END DEFINE IOOP
> ;END IFE FT.RP
; MACRO TO SAVE AND RESTORE PI ASSIGNMENT
IFN FT.RP, <
DEFINE SAVPI(AC) <
CONI DPC,AC
ANDI AC,7
PUSH P,AC
> ; END OF DEFINE SAVPI
DEFINE RESPI(AC) <
POP P,AC
CONO DPC,(AC)
> ; END OF DEFINE RESPI
> ; END OF IFN FT.RP
IFE FT.RP, <
DEFINE SAVPI(AC) <>
DEFINE RESPI(AC) <>
> ; END OF IFE FT.RP
;AC USAGE
F==0 ;FLAGS
T1=1 ;GP TEMP
T2=2 ; ...
T3=3 ; ...
T4=4 ; ...
Q1=5 ;GENERALLY HOLDS A SINGLE CHARACTER
Q2=6 ;BYTE POINTER TO AN INPUT STRING
Q3=7 ;BYTE POINTER TO AN OUTPUT STRING
P1=10 ;OFTEN PRESERVED
P2=11 ; ..
P3=12 ;A NUMBER
P4=13 ;DESTINATION POINTER (DISK ADDR, BYTE PTR)
P5=14 ;DISK ADDRESS OR PARSER STATE
P6=15 ;DEVICE TYPE INDEX
TM.IDX==0 ;TM02/TM03
DX.IDX==1 ;DX20
CX=16 ;RETURN ADDRESS
P=17 ;STACK POINTER
;BIT ALLOCATION IN F
F.WRIT==1B0 ;WRITE FILE IF ON
F.PHYS==1B1 ;PHYSICAL ADDRESSES IF ON, VIRTUAL IF OFF
F.CLR==1B2 ;CLEAR CORE IF ON
F.STRT==1B3 ;START AFTER LOAD IF ON
F.ACT==1B4 ;SOME ACTION REQUEST IF ON
F.BACK==1B5 ;BACKUP SCANNER IF ON
F.OUT==1B6 ;THIS STATE HAS PRODUCED OUTPUT IF ON
F.DUMP==1B7 ;DUMP VS SAVE IF ON
F.IOER==1B8 ;IO ERROR DURING DUMP
F.ALL==1B9 ;LOAD ALL PAGES FROM 0 TO VFREE
F.NCHL==1B10 ;DON'T USE .JBSYM TO CHANGE PAGE LIMITS
;BITS PROVIDED BY KLINIT ON A SPECIAL LOAD CONDITION
F11.LD==1B0 ;DO DEFAULT LOAD
F11.DM==1B1 ;DO DUMP OF CORE
;FDB STRUCTURE DEFINITIONS
DEFSTR (FBEXL,.FBEXL,35,33) ;LINK TO NEXT EXTENSION FDB
DEFSTR (FBCTL,.FBCTL,35,36) ;CONTROL BITS FROM FDB
DEFSTR (FBADR,.FBADR,35,36) ;DISK ADDRESS OF INDEX BLOCK
DEFSTR (FBGEN,.FBGEN,17,18) ;GENERATION # OF FILE
DEFSTR (FBGNL,.FBGNL,35,33) ;LINK TO NEXT GENERATION
DEFSTR (FBNAM,.FBNAM,35,36) ;POINTER TO NAME STRING
DEFSTR (FBEXT,.FBEXT,35,36) ;POINTER TO EXTENSION STRING
.SYMAD==0
.SYMVL==1
DEFSTR (SYMET,.SYMAD,2,3) ;SYMBOL TABLE ENTRY TYPE
DEFSTR (SYMAD,.SYMAD,35,33) ;ADDRESS OF BLOCK IN DIR FOR THIS SYM
DEFSTR (SYMVL,.SYMVL,35,36) ;FIRST FIVE CHARS OF NAME
;STORAGE ALLOCATION - *NOTE* ADDRESSED USED ARE ALL VIRTUAL!
; THE ORDER OF THESE CANNOT BE CHANGED INDISCRIMINATELY
NCSTPG==10 ;NUMBER OF CST PAGES - THIS DETERMINES THE
; MAXIMUM AMOUNT OF CORE THAT CAN BE DUMPED
;100 IS A SAFE NUMBER FOR ANY SIZE MACHINE.
IFN SMFLG, <NCSTPG==4>
A%EDDT==5 ;ADDRESS OF EDDT FOR DEBUGGING
EDDTSZ==40 ;NUMBER OF PAGES TO MAP FOR EDDT
;PAGES USED FOR BOOT. ALLOCATION IS DONE UPWARD FROM VORG.
;WHEN DONE, VFREE IS THE LAST FREE PAGE BEFORE BOOT BEGINS.
DEFINE PG(ADDR,SIZE<1>),<
VFREE==VFREE-<SIZE> ;;MOVE FREE PAGE DOWN BY REQUIRED PAGES
ADDR==<VFREE+1>_9 ;;THEN DEFINE DESIRED ADDRESS
>
VORG==777 ;LAST PAGE USED BY BOOT
VFREE==VORG ;INITIALIZE LAST FREE PAGE
PG A%CODE,3 ;THREE CODE PAGES
PG A%FP0 ;FILE PAGE ZERO WINDOW
PG A%XB ;INDEX BLOCK BUFFER
PG A%SXB ;SUPER INDEX BLOCK BUFFER
PG A%CST,NCSTPG ;CORE STATUS TABLE PAGES
PG A%PTB ;PAGE TABLE PAGE
PG A%EPT ;EXEC PAGE TABLE
PG A%DPG ;DIRECTORY HEADER PAGE
PG A%DIR ;DIRECTORY DATA PAGE
A%VFST==<VFREE+1>_9 ;ADDRESS OF FIRST PAGE
A%VORG==VORG_9 ;ADDRESS OF LAST PAGE
A%DATA==A%CODE ;LOCATION WHERE DATA GOES
DEFINE ALLOC(VAR,SIZ)
<VAR=A.DATA
IFNB <SIZ><A.DATA==A.DATA+SIZ>
IFB <SIZ><A.DATA==A.DATA+1>
>
A.DATA==A%DATA ;INITIALIZE COUNTER
;NOTE -- DATA BETWEEN Z.STRT AND Z.END GETS ZEROED ON EACH COMMAND
Z.STRT==A.DATA
ALLOC(ISTRNG) ;INPUT STRING POINTER SAVE VARIABLE
ALLOC(START) ;STARTING ADDRESS
;DO NOT REORDER THE FOLLOWING WITHOUT CHANGING DEFAULT PROCESSING
DEFBEG==A.DATA ;BEGINNING OF DEFAULTED AREA
ALLOC(FILSTR) ;POINTER TO FILE NAME STRING
ALLOC(DIRSTR) ;POINTER TO DIRECTORY STRING
ALLOC(EXTSTR) ;POINTER TO FILE EXTENSION STRING
ALLOC(VERSTR) ;POINTER TO VERSION STRING
ALLOC(SWSTR) ;POINTER TO SWITCH STRING
ALLOC(UBSTR) ;POINTER TO UPPER BOUND STRING
ALLOC(LBSTR) ;POINTER TO LOWER BOUND STRING
DEFEND==A.DATA-1 ;END OF DEFAULTED DATA AREA
;END OF DO NOT REORDER
ALLOC(D$FIL,8) ;STRING STORAGE FOR FILE NAME
ALLOC(D$DIR,8) ;STRING STORAGE FOR DIR NAME
ALLOC(D$EXT,8) ;STRING STORAGE FOR EXTENSION STRING
ALLOC(D$VER,2) ;STRING STORAGE FOR VERSION STRING
ALLOC(D$SW,2) ;STRING STORAGE FOR SWITCH STRING
ALLOC(D$ISTR,^D25) ;STRING STORAGE FOR INPUT STRING
ALLOC(D$UB,2) ;STRING STORAGE FOR UPPER BOUND STRING
ALLOC(D$LB,2) ;STRING STORAGE FOR LOWER BOUND STRING
ALLOC(VERNUM) ;VERSION NUMBER OF FILE
ALLOC(LWRLIM) ;LOWER PAGE LIMIT FOR GET/SAVE
ALLOC(UPRLIM) ;UPPER PAGE LIMIT FOR GET/SAVE
ALLOC(FNDSTR) ;STRING POINTER TO CURRENT NAME STRING
; DO NOT CHANGE THE ORDER OF THE FOLLOWING TWO WORDS
ALLOC(FNDSTE) ;STRING POINTER TO CURRENT EXT
ALLOC(FNDSTV) ;CURRENT VERSION NUMBER
; ***** NOTE WELL ***** FNDSTE MUST BE FOLLOWED IMMEDIATELY BY
; FNDSTV BECAUSE THEY ARE STORED USING A
; DMOVEM INSTRUCTION IN ROUTINE GETIDX !
;DISK DEPENDENT DATA
;DO NOT REORDER WITHOUT CHANGING SWPMON
ALLOC(MAXUNI) ;LARGEST LOGICAL UNIT IN STR
;END OF DO NOT REORDER
ALLOC(FNDCMD) ;BYTE POINTER TO INITIAL TYPEIN
ALLOC(DEV) ;POINTER/ SIXBIT DEVICE NAME
Z.END==A.DATA-1
; FOLLOWING LOCATIONS NOT CLEARED ON EACH COMMAND
DSKSIZ==^D8
ALLOC(FILPAG) ;PAGE # READ FROM FILE
ALLOC(STRNAM) ;SIXBIT NAME OF FS OR DEV (I.E. MT:)
ALLOC(DSKTYP) ;UNIT TYPE FOR DISK STRUCTURES
TAPTYP==DSKTYP ;UNIT TYPE FOR TAPES
ALLOC(NUMCYL) ;NUMBER OF CYLINDERS PER UNIT FOR THIS TYPE
ALLOC(DSKTAB,DSKSIZ) ;LOGICAL/PHYSICAL MAPPING
ALLOC(CURPAG) ;CURRENTLY MAPPED DIRECTORY PAGE
; ** CAUTION: DO NO INITIALIZE TO 0 **
ALLOC(DIORG) ;HOLDS DISK INDEX ORIGIN
ALLOC(XBNUM) ;-1 FOR SHORT FILE, XB # OF MAPPED XB
; IF THIS FILE IS A LONG FILE
ALLOC(MAXCOR) ;MAX CORE AVAILABLE
IFN FT.MTA,<ALLOC(DIRFLG)> ;NON-ZERO IF EXE DIRECTORY HAS BEEN READ
ALLOC(LODBAS) ;ADDRESS OF WHERE BOOT GOT LOADED
ALLOC(LODTOP) ;ADDRESS PAST WHERE BOOT GOT LOADED
ALLOC(TOPBAS) ;ADDRESS OF WHERE BOOT GOT MOVED
ALLOC(TOPTOP) ;ADDRESS PAST WHERE BOOT GOT MOVED
ALLOC(LODTYP) ;TYPE OF MONITOR LOAD: 0,DEFAULT - NO OPR COMMAND
ALLOC(NOLDDX) ;NON-ZERO IF WE DON'T LOAD DX20 MICROCODE
ALLOC(ZOOT,5) ;THIS IS TO PUT SOME SPACE BETWEEN THE PDL AND
;LODTYP. WITH ALL THE -N(P) ACCESS I SUSPECT
;A BUG IN SOME OF THEM BUT CAN'T PROVE IT.
; NON-0, PROMPT AND TAKE OPR COMMAND
PDLEN==20 ;PUSH DOWN STACK SIZE
ALLOC(PDL,PDLEN) ;PUSH DOWN STACK
ALLOC (DTCNOW) ;ALLOCATE CONO WORD
IFE FT.RP,<
ALLOC(PIA) ;RH20 PI ASSIGNMENT
ALLOC(INIVEC) ;RH20 INITIAL INT VECTOR REGISTER
> ; END OF IFE FT.RP
ENTFLG==400000 ;ENTRY IN USE FLAG IN DSKTAB
ICCW==20
LCORAD==24 ;LOWEST CORE ADDR DUMPED/LOADED
TIMLOC==23 ;LOCATION OF TIME BASE
.DMPUL==1000*NCSTPG-1 ;UPPER PAGE LIMIT FOR DUMPING
N.BKPG==4
IFN FT.RP,<
N.SCL4==^D200 ;NUMBER OF SECTORS PER CYLINDER
N.CLUN==^D400 ;(RP03) NUMBER OF CYLINDERS PER UNIT
> ;END OF IFN FT.RP
IFE FT.RP,<
N.SCL3==^D148 ;SECTORS PER CYL (RM03)
N.SCL4==^D380 ;SECTORS PER CYL (RP04/RP05/RP06)
N.SCL7==^D900 ;SECTORS PER CYL RP07
N.CLP3==^D820 ;CYLS PER UNI (RM03)
N.CLP4==^D400 ;CYLS PER UNI (RP04/5)
N.CLP6==^D800 ;CYLS PER UNI (RP06)
N.CLP7==^D558 ;CYLS PER UNI (RP07)
N.STK3==^D30 ;SECTORS PER TRACK (RM03)
N.STK7==^D30 ;SECTORS PER TRACK (RP07)
N.STK4==^D20 ;SECTORS PER TRACK (RP04)
> ;END IFE FT.RP
;GLOBALS FOR THE REST OF THE MONITOR
VBSTRT==:A%DIR ;START OF VBOOT PRIVATE AREA
VBEPT==:A%EPT ;WHERE VBOOT EXPECTS EPT TO BE MAPPED
VBEND==:A%VORG ;VBOOT ITSELF
VBDDAT==:DIORG ;START OF VBOOT DISK DATA AREA
BUTRXB==:151 ;ROOT XB
BUTMUN==:152
BUTDRT==:153
BUTCMD==:163
BUTPGS==:202 ;VBSTRT,,VBEND
BUTEPT==:203 ;VBEPT
BUTPHY==:204 ;# OF PAGES TO MAP,,# OF FIRST PHYSICAL PAGE
BUTVIR==:205 ;VIRTUAL ADDRESS OF FIRST PAGE TO MAP
IFE FT.PRT,<END> ;END HERE IF SYMBOLS-ONLY ASSEMBLY
;LOCATIONS IN DIR AREA
DIRNUM==A%DIR+2 ;DIR NUMBER
SYMBOT==A%DIR+3 ;BOTTOM OF ST AREA
SYMTOP==A%DIR+4 ;TOP OF ST AREA
HOMNAM==A%FP0+200+0 ;SIXBIT /HOM/
HOMID==A%FP0+200+1 ;PACK ID
HOMSNM==A%FP0+200+3 ;STRUCTURE NAME
HOMLUN==A%FP0+200+4 ;# UNI IN STR,,THIS UNI #
HOMRXB==A%FP0+200+10 ;ROOT INDEX BLOCK
HOMCOD==A%FP0+200+176 ;FUNNY CODE
CODHOM==707070 ;TYPE CODE FOR HOME BLOCK
; EXEC PAGE TABLE LOCATIONS
EPTEST==540 ;INDEX TO EXEC SECTION TABLE
EPTATR==421 ;INDEX TO ARITHMETIC TRAP INSTRUCTION
EPTPFW==503 ;INDEX TO PAGE FAIL WORD
EPTSPT==760 ;INDEX TO SPT (ONE WORD TABLE FOR VBOOT)
; OPDEF FOR STORING VALUES IN PAGER REGISTERS
OPDEF XCTU [XCT 4,0] ;PXCT DEFINITION
;OTHER OPDEFS
OPDEF CLRPT [701100,,0] ;CLEAR PAGING MEMORY
IFN SMFLG,<
OPDEF TIOE [710000,,0]
OPDEF TION [711000,,0]
OPDEF RDIO [712000,,0]
OPDEF WRIO [713000,,0]
OPDEF WRHSB [702700,,0]
OPDEF BSIO [714000,,0]
OPDEF BCIO [715000,,0]
OPDEF WRSPB [702400,,0]
OPDEF RDSPB [702000,,0]
OPDEF WRCSB [702440,,0]
OPDEF RDCSB [702040,,0]
OPDEF WRCSTM [702540,,0]
OPDEF RDCSTM [702140,,0]
> ;END IFN SMFLG
; PAGER REGISTERS
CSTMSK==0 ;CST MASK, ANDED WITH CST ENTRY
CSTDTA==1 ;CST DATA, IORED WITH CST ENTRY
CSTADR==2 ;CST BASE ADDRESS
SPTADR==3 ;SPT BASE ADDRESS
;KL-10 SPECIFIC UPT DEFINITIONS
UPTPFW==500 ;PAGE FAIL ADDRESS
UPTPFO==502 ;PAGE FAIL PC WORD
IFN FT.PRT&1,<
; ***** MAIN ENTRY POINT AND INITIALIZATION *****
;NOTE -- VBOOT WILL BE ENTERED BY THE FRONT END AT ENT:+0 FOR SPECIAL LOAD
; AND AT ENT:+1 FOR DEFAULT LOAD
; SET UP RELOCATION CONSTANT IN ACCUMULATOR 16
ENT:
IFE SMFLG,<
TDZA F,F ;DIALOGUE LOAD ALWAYS IF STARTED HERE
JFCL ;SPEIAL LOAD. PRESERVE BITS
CONI PAG,15 ;GET CURRENT STATE OF CACHE
ANDI 15,PGCLKE!PGCLDE ;CLEAR ALL BUT CACHE BITS
> ;END IFE SMFLG
IFN SMFLG,<
MOVEI 15,PGKLPG ;SM10 REQUIRES KL PAGE FOR TRAPS
> ;END IFN SMFLG
CONO APR,AP.RES ;IOB RESET
CONO PAG,0(15) ;TURN OFF PAGING
MOVSI 17,(<JRST (16)>) ;RETURN INST
JSP 16,17 ;GET CURRENT PC
SUBI 16,.-ENT ;RETURN HERE
AND F,[F11.DM!F11.LD]-ENT(16) ;SAVE ONLY DEFINED BITS
MOVEI T1,PAGTRP-ENT(16) ;THE PAGE FAULT HANDLER
;**;[5.1095] Change 2 lines at ENT: +20L JGZ 14-JUL-80
MOVEM T1,CODEND-ENT+EPTPFW(16) ;[5.1095] SET UP TEMPORARY EPT/UPT
MOVEI T1,CODEND-ENT(16) ;[5.1095] GET LOCAL ADDRESS
LSH T1,-11 ;MAKE IT A PAGE NUMBER
IOR 15,T1 ;ADD THEM TO THE CACHE BITS
CONO PAG,0(15) ;MAKE IT THE UBR
TDO T1,[1B2+1B18]-ENT(16) ;AND SET EBR AND INHIBIT METER UPDATE
DATAO PAG,T1 ;AND THE EBR
; DETERMINE HIGHEST PHYSICAL CORE ADDRESS
J1: CONO APR,AP.RNX ;FIND HIGHEST EXTANT CORE .LE. 256K
MOVEI P1,777000 ;START AT PAGE 512
FNDCOR: SKIP 20(P1) ;REFERENCE PAGE
TSTCOR: CONSO APR,AP.NXM ;NXM?
JRST GOTCOR-ENT(16)
J2: CONO APR,AP.RNX ;NXM - RESET
SUBI P1,1000 ;TRY NEXT LOWER PAGE
JUMPN P1,FNDCOR-ENT(16) ;LOOP
HALT .-ENT(16) ;INTERLEAVE PROBABLY BAD
; MOVE DISK SEARCH CODE TO TOP OF CORE WHILE MOVING TOP TO BOOTS OLD PLACE
;***NOTA BENE - P MUST REMAIN PRESERVED UNTIL FNDDEV!!
;**;[137] Add several lines at GOTCOR: +0L JGZ 23-NOV-80
GOTCOR:
IFN SMFLG,< ;[137] DBE SCAN FOR KS ONLY; -11 DOES KL
MOVEI T1,20 ;[137] WHERE TO START TESTING CORE
DBESCN: MOVE T2,0(T1) ;[137] DO DBE SCAN TO INITIALIZE MEMORY
MOVEM T2,0(T1) ;[137] INCASE OF POWERFAIL (BLT WON'T WORK)
CAIE T1,777(P1) ;[137] LAST WORD? (AOBJN WON'T WORK)
AOJA T1,DBESCN-ENT(16) ;[137] NO, LOOP OVER ALL LOW CORE THERE
> ;[137] END SMFLG CONDITIONAL
HRRI P5,1 ;PUT CODE IN T1
HRLI P5,BOTMOV-ENT(16) ;GET BOOT MOVING CODE
BLT P5,T1+MOVEND-BOTMOV ;MOVE MOVING CODE
HRRZI P2,A%VFST-A%CODE+1000(16) ;WHERE WE START MOVING FROM
MOVEM P2,P ;SAVE OLD BASE
HRRZI P3,A%VFST-A%VORG(P1) ;WHERE WE ARE MOVING IT TO
HRRZI P4,1000+A%VORG-A%VFST ;NUMBER OF WORDS TO MOVE (ROUND PAGES)
;**;[5.1095] Delete one line at GOTCOR: +7L JGZ 14-JUL-80
JRST T1 ;MOVE THE CODE
; CLEAR AND SET UP EXEC PAGE TABLE (EPT)
;**;[5.1095] Add one line after label at CORMVD: +0L JGZ 14-JUL-80
CORMVD: HRRZI 16,A%CODE-1000-A%VORG(P1) ;[5.1095] COMPUTE NEW BASE
MOVE P5,P1 ;SAVE ADR OF HIGHEST PHYSICAL PAGE
SUBI P1,A%VORG-A%EPT ;MOVE BASE TO START OF EPT
MOVEI T1,1(P1) ;BUILD BLT POINTER
HRL T1,P1 ; ...
SETZM 0(P1) ;CLR FIRST WORD
BLT T1,777(P1) ;TO END OF EPT
MOVSI T1,(<JFCL>) ;NO-OP ARITH TRAP INST
MOVEM T1,421(P1) ; ...
MOVEI T1,PFERR ;THE NEXT PAGE FAULT HANDLER
MOVEM T1,EPTPFW(P1) ;TO THE EPT
MOVE P2,P1 ;COPY EPT BASE ADR
LSH P2,-9 ;GET PHYS PAGE #
; SET UP EXEC SECTION TABLE AND 1-WORD SPT IN EXEC PAGE TABLE
MOVEI T1,A%PTB-A%EPT(P1) ;GET PHYSICAL ADDRESS OF PAGE TABLE
LSH T1,-^D9 ;CONVERT TO PAGE #
MOVEM T1,EPTSPT(P1) ;SAVE 1-WORD SPT
MOVX T1,1B1!1B4 ;CODE=2, WRITE, SPT INDEX=0
MOVEM T1,EPTEST(P1) ;SAVE SECTION PTR TO PAGE TABLE
; MOVE BASE POINTER TO PAGE TABLE PAGE
ADDI P1,A%PTB-A%EPT ;CHANGE BASE TO PHYS ADDRESS OF A%PTB
; FORM AOBJN POINTER FOR LOOPING THROUGH PAGE TABLE
MOVEI T2,A%DIR-A%PTB(P1) ;PHYSICAL ADDRESS IN RH OF T2
LSH T2,-9 ;CONVERT TO # OF DIRECTORY PAGE A%DIR
HRLI T2,-< <VORG-A%DIR_-9>+1 > ;NUMBER OF PAGES TO MAP
; MAP PAGES USED BY VBOOT
MOVEI T1,A%DIR_-9(P1) ;START MAPPING AT DIRECTORY AREA
REPEAT 0,<
;EDDT NEEDS TO BE MAPPED WHEN BOOT GOES MAPPED.
;EDDT DOES NOT NORMALLY GET MAPPED INTO BOOT SPACE. IF YOU WANT TO DEBUG WITH
;EDDT AFTER BOOT GETS TO FNDDEV YOU NEED TO ADD THE FOLLOWING INSTRUCTIONS.
;**NOTA BENE - THE PATCH IS FOR SYSTEMS WITH 512K OR MORE ONLY.
HRLZI T2,-1000 ;DO THE WHOLE MAP PAGE
MOVE T1,P1 ;START AT LOCATION ZERO
>
SETPTB: HRRZ T3,T2 ;GET PHYSICAL ADR OF PAGE
TXO T3,IMMPTR ;FORM AN IMMEDIATE POINTER
MOVEM T3,(T1) ;STORE PAGE TABLE ENTRY
ADDI T1,1 ;POINT TO NEXT PAGE TABLE ENTRY
AOBJN T2,SETPTB-ENT(16) ;GO MAP REMAINING PAGES
; SET UP CST ENTRIES FOR ALL PHYSICAL CORE NOW
ADDI P1,A%CST-A%PTB ;CHANGE BASE POINTER TO CST PAGE
MOVE T1,P1 ;SET ALL SLOTS
HRLI T1,-<NCSTPG*1000> ;ONE PAGE WORTH
MOVX T3,1B5 ;GET A NON-ZERO CST CODE FIELD
SETCST: MOVEM T3,(T1) ;STORE A CST ENTRY
AOBJN T1,SETCST-ENT(16) ;LOOP TILL ALL CST ENTRIES SET UP
TLO P2,(1B2) ;LOAD UBR
MOVE P3,P2 ;SAVE PAGER WORD TO STORE LATER
HRLI P2,500600 ;LOAD PREVIOUS AC BLOCK 6
; AND LOAD THE UBR
J3: DATAO PAG,P2 ; ...
IFN SMFLG,<
HRRZI T1,A%EPT-A%CST+EPTSPT(P1) ;GET PHYS ADR OF SPT
WRSPB T1 ;SET UP SPB
MOVEI T1,400 ;SET UP HALT STATUS BLOCK
WRHSB T1
WRCSB P1 ;SET UP CST
WRCSTM [77B5]
> ;END IFN SMFLG
IFE SMFLG,<
HRRZI T1,A%EPT-A%CST+EPTSPT(P1) ;GET PHYS ADR OF SPT
XCTU [MOVEM T1,SPTADR]-ENT(16) ;STORE SPT BASE ADDRESS
XCTU [MOVEM P1,CSTADR]-ENT(16) ;STORE CST BASE ADDRESS
MOVX T1,77B5 ;GET ONES FOR CST MASK FIELD
XCTU [MOVEM T1,CSTMSK]-ENT(16) ;STORE CST MASK VALUE
> ;END IFE SMFLG
TRO P2,1B22!1B21 ;TRAP EN AND KL PAGING
CONI PAG,T1 ;GET CACHE BITS AGAIN
IFE SMFLG,<
ANDI T1,PGCLKE!PGCLDE>
IFE SMFLG,<
IOR P2,T1 ;ADD IN CACHE BITS
>
DMOVE T1,[ CONO PAG,(P2) ;LOAD EBR
JRST FNDDEV ]-ENT(16) ;GO SET UP LOW CORE MAP
TOP2: JRST T1 ;AND TURN THE PAGING ON
;**;[5.1095] Delete 3 lines at TOP2: +2L JGZ 14-JUL-80
LIT
IFGE .-ENT-141,<PRINTX NO ROOM FOR INITIAL UPT>
BLOCK 1000-<.-ENT> ;RESERVE REST OF PAGE FOR THE EPT/UPT
BLOCK A.DATA-A%DATA ;MAKE ROOM FOR ALLOOCATED VARIABLES
CODE:
PHASE A.DATA
IFE SMFLG,<
FNDDEV: MOVEM F,LODTYP ;SAVE STARTING FLAGS FROM KLINIT
TXNE F,F11.LD!F11.DM ;AUTO-RELOADING OR DUMPING?
SETOM NOLDDX ;YES, DON'T LOAD THE DX20 MICROCODE
>
IFN SMFLG,<
FNDDEV:
> MOVEM P,LODBAS ;SAVE THE ADDRESS WHERE BOOT GO LOADED
MOVEI P,<1000+A%VORG-A%VFST>-1(P) ;END OF WHERE BOOT GOT LOADED
MOVEM P,LODTOP ;LAST ADDRESS MOVED
HRRZI P,A%VFST-A%VORG(P5) ;TOP ADDRESS ROUNDED TO PAGES
MOVEM P,TOPBAS ;FIRST ADDRESS USED
MOVEI P5,777(P5) ;SET UP TOP OF SAVED FOR THE SAVE
MOVEM P5,TOPTOP ;ADDRESS OF TOP OF BOOT
;**;[137] Add one line at CODE: +17L JGZ 23-NOV-80
IFE SMFLG,< ;[137] ONLY APPROPRIATE FOR KL
; DEFEND AGAINST MEMORY PARITY ERRORS IN 20-23
SETZM 20 ;WIPE OUT PARITY ERRORS
;**;[5.1044] Change 1 line at SETEPT: -8L JGZ 6-JUL-80
MOVE T1,[20,,21] ;[5.1044] ZERO WHOLE AREA
BLT T1,23 ;DO IT
;**;[137] Add one line at BLT T1,23 +1L JGZ 23-NOV-80
> ;[137]
;**;[5.1046] Add 6 lines at SETEPT: -5L JGZ 6-JUL-80
IFN SMFLG,<
;INTERIM PROTECTION AGAINST CONFUSING THE FRONT END WITH KLINIK OUTPUT
SETZM KLIOWD ;[5.1046] CLEAR THE KLINIK OUTPUT WORD
>
; CODE TO MAP LOW CORE USING KL STYLE PAGING
MOVEI P1,A%PTB ;GET ADDRESS OF PAGE TABLE PAGE
SETZB P2,P3 ;P2=VIRTUAL, P3=PHYSICAL PAGE #
SETEPT: CONO APR,AP.RNX ;RESET NXM FLAG
MOVE T1,P3 ;GET PHYSICAL PAGE NUMBER
TXO T1,1B2!1B4 ;CODE = 1, WRITE
MOVEM T1,(P1) ;PUT ENTRY INTO PAGE TABLE
MOVE T1,P2 ;GET VIRTUAL PAGE #
LSH T1,^D9 ;CONVERT PAGE # TO ADDRESS
J4: CLRPT 0(T1) ;CLEAR THE ENTRY FIRST
SKIP 20(T1) ;TRY TO REFERENCE VIRTUAL PAGE
TSTMEM: CONSZ APR,AP.NXM ;NXM OCCUR ?
JRST SETEP1 ;YES, TRY NEXT PHYSICAL PAGE
ADDI P1,1 ;NO, NEXT PAGE TABLE SLOT
ADDI P2,1 ;NEXT VIRTUAL PAGE #
CAILE P2,VFREE ;MAP JUST UP TO OURSELF
JRST SETEP2 ;IF DONE, GO SET UP DTE20
SETEP1: ADDI P3,1 ;NEXT PHYSICAL PAGE #
CAIGE P3,NCSTPG*1000 ;DONE ALL OF CORE ?
JRST SETEPT ;NO, GO DO NEXT PAGE
IFE SMFLG,<
SETEP2: SETZM DTEFLG ;CLEAR DONE FLAG
SETZM DTEMTI ;INITIALIZE INPUT READY FLAG
MOVSI T1,-DTEN ;SCAN ALL AVAILABLE DTE'S
MOVE T2,[CONSO DTE,DTEPRV] ;LOOK FOR MASTER
MOVE T3,[CONSO DTE,PI0ENB+7] ;LOOK FOR ANY PI ASSIGNMENT
MOVE Q1,[CONO DTE,0] ;PROTOTYPE CONO
SETEP3: XCT T3 ;A PI ASSIGNMENT UP?
JRST [ HRRI Q1,PIENB+PI0ENB ;NO. TRY TO SET IT
XCT Q1
XCT T3 ;NOW SET?
JRST SETEP5 ;NO. NON-EXISTANT DEVICE THEN
TRZ Q1,PI0ENB ;YES. TURN IT OFF
XCT Q1 ;DO IT
JRST .+1] ;AND PROCEED
XCT T2 ;THIS IT
JRST [ MOVEI T1,0(T1) ;YES. GET DTE NUMBER
LSH T1,^D26 ;POSITION FOR CONO
ADD T1,[CONO DTE,0(Q1)] ;PROTOTYPE WORD
MOVEM T1,DTCNOW ;SAVE IT
JRST SETEP4] ;DONE
SETEP5: ADD T2,[4B11] ;NEXT DTE
ADD T3,[4B11]
ADD Q1,[4B11] ;ADJUST ALL I/O INSTRUCTIONS
AOBJN T1,SETEP3 ;NOPE. LOOK AT NEXT
HALT . ;NOT THERE. CAN'T HAPPEN
SETEP4: MOVEI Q1,.DTMMN ;MONITOR MODE ON
MOVEM Q1,DTECMD ; STORE IN COMMAND
J5: MOVEI Q1,TO11DB ;RING THE BELL
XCT DTCNOW ;DO IT
J6: SKIPN DTEFLG ;WAIT FOR COMPLETION
J7: JRST .-1 ; ...
> ;END IFE SMFLG
IFN SMFLG,<
SETEP2:
;**;[137] Add several lines at SETEP2: +1L JGZ 25-NOV-80
;MAP AND SCAN THE REST OF MEMORY TO BE SURE IT IS INITIALIZED
DBEPGA=1000 ;[137] USE PAGE ONE FOR MEM SCAN MAPPING
MOVE T4,A%PTB+<DBEPGA/1000> ;[137] PICK UP A MAP SLOT TO USE
MOVEI P3,1000 ;[137]START SCAN AT PAGE 1000
MAPDBE: CONO APR,AP.RNX ;[137] RESET NXM FLAG FOR TESTS
MOVE T1,P3 ;[137] GET PHYSICAL MEMORY PAGE NUMBER
TXO T1,1B2!1B4 ;[137] MAKE IMMEDIATE POINTER, WRITABLE
MOVEM T1,A%PTB+<DBEPGA/1000> ;[137] SET THE POINTER IN THE MAP
CLRPT DBEPGA ;[137] CLEAR THE PAGER
SKIP DBEPGA ;[137] REFERENCE THE PAGE
CONSZ APR,AP.NXM ;[137] NXM RESULT?
JRST MAPDB1 ;[137] YES, DON'T BOTHER WITH THE SCAN
MOVE T1,[-1000,,DBEPGA] ;[137] GET AOBJN POINTER TO PAGE
DBEMSC: MOVE T2,0(T1) ;[137] SCAN PAGE, CLEARING DBE/ECC ERRORS
MOVEM T2,0(T1) ;[137] (BLT DOESN'T WORK)
AOBJN T1,DBEMSC ;[137] LOOP FOR ALL OF PAGE
MAPDB1: ADDI P3,1 ;[137] NEXT PAGE
CAIGE P3,NCSTPG*1000 ;[137] DONE ALL POSSIBLE CORE?
JRST MAPDBE ;[137] NO, DO NEXT PAGE
MOVEM T4,A%PTB+<DBEPGA/1000> ;[137] RESTORE THE OLD MAP SLOT
CLRPT DBEPGA ;[137] AND CLEAR THE PAGER FOR IT AGAIN
HRRZ F,RELWD ;GET RELOAD WORD
MOVEM F,RELWD ;STOP KEEPALIVE IF UNDERWAY
TRNE F,RLFLGS ;CHECK FOR RELOAD FLAGS
MOVE F,[F11.DM!F11.LD]
TRNE F,RSFLGS
MOVE F,[F11.LD]
MOVEM F,LODTYP
> ;END IFN SMFLG
MOVEM P5,MAXCOR ;SAVE MAX CORE AVAILABLE
SETOM CURPAG ;INITIALIZE CURRENTLY IN-CORE DIR PAGE
GETCM1: SETZM DSKTAB ;MAKE SURE THIS IS ZERO
IFN FT.MTA,<
MOVSI T1,'MT ' ;MAGTAPE DEFAULT DEVICE
SETZM DIRFLG ;NO DIRECTORY YET
>
IFE FT.MTA,<MOVSI T1,'PS '> ;DISK DEFAULT DEVICE
MOVEM T1,STRNAM ;STORE THE DEFAULT NAME
GETCOM: MOVE P,PDP ;SETUP PDL
MOVE T1,[Z.STRT,,Z.STRT+1] ;CLEAR DATA AREA
SETZM Z.STRT
BLT T1,Z.END
SKIPE LODTYP ;DIALOGUE LOAD?
JRST GETCO1 ;YES, DON'T PROMPT, DON'T TAKE OPR COMMAND
CALL CRLF ;DO RETURN
IFE FT.MTA, <
MOVE T1,[BYTE (6)'B','O','O','T',36] ;MACRO,HACKRO
>
IFN FT.MTA, <
MOVE T1,[BYTE (6)'M','T','B','O','O','T']
CALL SIXTYP
;**;[5.1045] Change 1 line at GETCO1: -3L JGZ 6-JUL-80
MOVE T1,[BYTE (6)36] ;[5.1045] MTBOOT, CLOSE ANGLE BRACKET
>
CALL SIXTYP ; ...
GETCO1: CALL GETSTR ;GET COMMAND FROM OPERATOR
MOVEM T1,FNDCMD ;SAVE COMMAND POINTER
SETZ P2, ;WHERE TO FORM STRUCTURE NAME
SKIPN T1,DEV ;DEVICE TYPED?
JRST [ SKIPE DSKTAB ;NO. ALREADY HAVE A DEVICE?
JRST FOUND ;YES. USE IT THEN
JRST DVX1] ;NO. GO FIND THWE DEFAULT
MOVE T2,[POINT 6,P2] ;PTR TO NAME
MOVEI T3,6 ;MAX # CHARS
DEVNAM: ILDB T4,T1 ;GET CHAR
CAIN T4,":" ;END OF NAME?
JRST DEVX ;YES - PUNT
SUBI T4,40 ;CONVERT TO SIXBIT
IDPB T4,T2 ;STORE CHR
SOJG T3,DEVNAM ;LOOP
DEVX: CAMN P2,STRNAM ;SAME STRUCTURE AS LAST TIME?
SKIPN DSKTAB ;YES. FOUND DEVICES YET?
SKIPA ;NO. MUST GO LOOK THEN
JRST FOUND ;YES. GO GET COMMAND
MOVEM P2,STRNAM ;NO. MAKE THIS THE STRUCTURE
DVX1: MOVE T1,[DSKTAB,,DSKTAB+1] ;SET UP TO CLEAR DSKTAB
SETZM DSKTAB ;CLEAR FIRST WORD OF TABLE
BLT T1,DSKTAB+DSKSIZ-1 ;CLEAR DISK TABLE
IFN FT.MTA,<SETZM DIRFLG> ;MAKE IT READ DIRECTORY AGAIN
SETZM DSKTYP ;INDICATE UNIT TYPE UNKNOWN
IFN FT.MTA, <
;THIS TEST IS INSERTED HERE TO MAKE DEFAULT AND SPECIAL LOADS FROM
; MAG TAPE WORK APPROXIMATELY THE SAME AS FOR DISK, AND TO PROVIDE
; FOR ANY POSSIBLE FUTURE CHANGE TO VBOOT WHEREIN A MAGTAPE DEVICE
; IDENTIFIER OTHER THAN "MT:" WILL BE ACCEPTED, AND ACTED UPON.
MOVSI T1,'MT ' ;GET MAG TAPE DEVICE NAME
CAME T1,STRNAM ;CORRECT DEVICE ENTERED ?
JRST FDSK ;NO, GO ISSUE ERROR MESSAGE
JRST FTAP ;GO FIND READY TAPE DRIVE
> ; END OF IFN FT.MTA
IFE FT.MTA, <
JRST FDSK ;GO FIND STRUCTURE
> ; END OF IFE FT.MTA
IFE FT.MTA, <
IFE FT.RP,<
FDSK: SETZB P1,P2 ;CHANNEL # HELD IN P1, UNIT IN P2
SETZM DIORG ;INITIALIZE DIRECTORY ORIGIN
MAP T1,A%FP0 ;GET PHYS ADDR OF FP0
TLZ T1,777760 ;KEEP JUST THE ADDRESS BITS
TLO T1,(<1B0+1B1+<1000B13>>) ;DATA XFR, LAST CCW, # OF WORDS
MOVEM T1,ICCW ;STORE
FDSK1:
MOVE T1,[1B1+ICCW] ;GET JUMP CCW
MOVE T2,P1 ;GET CHANNEL NUMBER
LSH T2,2 ;GET CHANNEL*4
MOVEM T1,A%EPT+ICA(T2) ;STORE INITIAL CCW FOR RH20
SETZM P2 ;START AT UNIT 0
CALL CHKCHN ;THIS CHANNEL EXIST ?
JRST FDSK2 ;YES, GO CHECK ITS UNITS
JRST FDSK4 ;NO, GO TRY NEXT CHANNEL
FDSK2: CALL CHKUNI ;THIS UNIT EXIST ?
JRST GOTDRV ;YES, GO SEE IF AN RP04
FDSK3: AOS P2 ;GET NEXT UNIT NUMBER
CAIG P2,MAXDRV ;CHECKED ALL DRIVES YET ?
JRST FDSK2 ;NO GO CHECK NEXT DRIVE
FDSK4: AOS P1 ;YES, INCREMENT CHANNEL #
CAIG P1,MAXCHN ;CHECKED ALL CHANNELS YET ?
JRST FDSK1 ;NO, GO DO NEXT CHANNEL
JRST FDSK5 ;YES, CHECK FOR ALL UNITS PRESENT
GOTDRV: ANDI T2,R4%TYP ;KEEP JUST THE DEVICE TYPE CODE
IFN FT.DX2,<
PUSH P,T2 ;SAVE THIS AC
CAIN T2,.DXTYP ;DX20?
PUSHJ P,LODX20 ;YES, LOAD IT
POP P,T2 ;RESTORE THE AC
>
SKIPG T1,DSKTYP ;DISK TYPE KNOWN YET?
JRST GOTDV3 ;NO - SEE IF ANY OF ALLOWED TYPES
CAMN T2,T1 ;YES - IS THIS UNIT SAME AS DESIRED?
JRST GOTDV0 ;YES - USE IT
CAIN T1,.R4TYP ;IS DESIRED TYPE RP04?
CAIE T2,.R5TYP ;YES - IS THIS UNIT AN RP05?
JRST FDSK3 ;NO TO EITHER QUESTION
IFN SMFLG,<
GOTDV0: MOVEI T1,R4%CPA!GO ;PACK ACK
WRIO T1,@RPCS1(P1) ;DO IT
RDIO T1,@RPDS(P1) ;READ THE DEVICE STATUS REGISTER
> ; END IFN SMFLG
IFE SMFLG,<
GOTDV0: MOVE T1,[R4%CSR!LR!R4%CPA!GO] ;PACK ACKNOWLEDGE, SETS VV BIT
CALL RHWT1 ;GO DO THE DATAO
MOVSI T1,(.TMDSR) ;READ DEVICE STATUS REGISTER
CALL RHRD1 ;GET IT
> ; END IFE SMFLG
TRNN T1,TMSMOL ;IS IT POWERED UP WITH A PACK ON-LINE?
JRST FDSK3 ;NO. FORGET IT
MOVE T1,[A%FP0,,A%FP0+1] ;SET UP FOR BLT
SETZM A%FP0 ;CLEAR FIRST WORD OF DATA PAGE
BLT T1,A%FP0+777 ;ZERO DATA PAGE PRIOR TO READ
CALL RD0 ;GO READ PAGE 0
CALL CHKHOM ;GO CHECK THE HOME BLOCK
JRST GOTDV2 ;NO GOOD, TRY BACKUP HOME BLOCK
GOTDV1: SKIPG T2,DSKTYP ;IS TYPE KNOWN YET?
MOVNS T2,DSKTYP ;NO - MAKE THIS TYPE THE DESIRED TYPE
MOVEI T1,N.CLP4 ;COMPUTE NUMBER OF CYLINDERS PER UNIT
CAIE T2,.R4TYP ;RP04?
MOVEI T1,N.CLP6 ;NO - ASSUME RP06
CAIN T2,.R3TYP ;RM03?
MOVEI T1,N.CLP3 ;YES
CAIE T2,.R7TY1 ;RP07?
CAIN T2,.R7TY2 ;RP07? (EITHER TYPE)
MOVEI T1,N.CLP7 ;YES
MOVEM T1,NUMCYL ;SAVE RESULT
JRST FDSK3 ;OK, GO CHECK NEXT UNIT
GOTDV2: CALL RD10 ;GO READ BACKUP HOME BLOCK
MOVE T1,[A%FP0,,HOMNAM] ;MOVE DATA TO WHERE THE CHKHOM
BLT T1,HOMCOD ; ROUTINE WANTS IT TO BE
CALL CHKHOM ;GO CHECK THE BACKUP HOME BLOCK
JRST FDSK3 ;ERROR
JRST GOTDV1 ;SETUP TYPE/SIZE IF NEEDED AND GO ON
;HERE IF DESIRED UNIT TYPE IS NOT KNOWN YET. CHECK TYPE AGAINST ALL
;KNOWN DISK TYPE UNITS.
GOTDV3: CAIN T2,.R3TYP ;RM03?
JRST GOTDV4 ;YES
CAIE T2,.R6TYP ;RP06?
CAIN T2,.R4TYP ;OR RP04?
JRST GOTDV4 ;YES - SAVE TYPE NEGATED
CAIE T2,.R7TY1 ;RP07?
CAIN T2,.R7TY2
JRST [ MOVEI T2,.R7TY1 ;ONLY ONE REALLY
JRST GOTDV4]
CAIE T2,.R5TYP ;RP05?
JRST FDSK3 ;NO - TRY FOR NEXT UNIT
MOVEI T2,.R4TYP ;YES - MAKE IT LOOK LIKE RP04
GOTDV4: MOVNM T2,DSKTYP ;SAVE NEGATED TYPE IN CASE HOME BLKS GOOD
JRST GOTDV0 ;AND TRY TO READ HOME BLOCKS
FDSK5: MOVE T1,MAXUNI ;NO - CHECK FOR FULL DECK
CHKSTR: SKIPN DSKTAB(T1) ;ANY ID?
JRST MISUNI ;NO - DEFECTIVE STRUCTURE
SOJGE T1,CHKSTR ;YES - LOOP FOR OTHER UNITS
JRST FOUND ;PASS COMMAND TO VBOOT
> ;END IFE FT.RP
IFN FT.RP,<
FDSK: SETZB P1,P2 ;UNIT # HELD IN P1
MAP T1,A%FP0 ;GET PHYS ADDR OF FP0
MOVEI T1,-1(T1) ;BUILD CCW
HRLI T1,-1000 ;...
MOVEM T1,ICCW ;STORE
FDSK1: MOVE T1,[600000,,0] ;RP10 SELECT OP
DPB P1,[POINT 3,T1,5] ;INSERT UNIT
DATAO DPC,T1 ;SELECT UNIT
DATAI DPC,T2 ;GET STATUS
TLNE T2,(1B13) ;DISK OFFLINE?
TRNN T2,2000 ;OR RP02?
JRST FDSK2 ;YES TO EITHER
SETZM DIORG ;INITIALIZE DIRECTORY ORIGIN
CALL RD0 ;READ PAGE 0
CALL CHKHOM ;SEE IF HOME BLOCK OK
SKIPA ;ERROR TRY BACKUP
JRST FDSK2 ;MORE CHECKS LATER
CALL RD10 ;READ BACKUP BLOCK
MOVE T1,[A%FP0,,HOMNAM] ;MOVE TO WHERE CHKHOM WANTS IT
BLT T1,HOMCOD ; ...
CALL CHKHOM ;SEE IF OK
JFCL ;CLARIFY LATER
FDSK2: AOS P1 ;NEXT UNIT
CAIGE P1,^D8 ;ANY REMAINING?
JRST FDSK1 ;YES - LOOP
MOVE T1,MAXUNI ;NO - CHECK FOR FULL DECK
CHKSTR: SKIPN DSKTAB(T1) ;ANY ID?
JRST MISUNI ;NO - DEFECTIVE STRUCTURE
SOJGE T1,CHKSTR ;YES - LOOP FOR OTHER UNITS
JRST FOUND ;PASS COMMAND TO VBOOT
> ;END IFN FT.RP
> ; END OF IFE FT.MTA
IFN FT.MTA, <
FDSK: DMOVE T1,[SIXBIT/TAPE ONLY/]
JRST ERRTYP ;WRONG ASSEMBLY
> ; END OF IFN FT.MTA
;SUBR TO CHECK IF A CHAN IS PRESENT
IFE FT.RP, <
IFE SMFLG, <
CHKCHN: MOVEI T1,.RHMBR ;RESET
CALL RHCO1 ;DO CONO
MOVEI T1,.RHMBE ;ENABLE
CALL RHCO1
CALL RHCI1 ;DO CONI
TRNN T1,.RHMBE ;BIT COME BACK?
RETSKP ;SKIP RETURN
RET ;RETURN
> ; END IFE SMFLG
IFN SMFLG, <
CHKCHN: CAIG P,MAXCHN1 ;ONLY ONE LEGAL FOR NOW
RET
RETSKP
> ; END IFN SMFLG
> ; END IFE FT.RP
IFN FT.RP,<
; ROUTINE FOR RH10 --
CHKCHN: MOVX T1,R4%DTR ;GET DEVICE TYPE REGISTER #
CALL RHRD1 ;READ DEVICE 0 REGISTER
TXNE T1,5000 ;BUS TIMEOUT OR PARITY ?
RETSKP ;YES, SKIP RETURN
RET ;RETURN
> ; END OF IFN FT.RP
;HERE TO SEE IF A UNIT EXISTS, IF SO, RETURN TYPE CODE
IFE SMFLG,<
CHKUNI: MOVSI T1,(.TMDTR) ;READ DRIVE TYPE REG
CALL RHRD1 ;...
MOVE T2,T1 ;COPY FOR RETURN
CALL RHCI1 ;SEE IF REG ACC ERR
TRNN T1,.RHRAE ; ...
RET ;ALL IS WELL
MOVEI T1,.RHRAE!.RHMBE ;CLEAR RAE, ENABLE
CALL RHCO1 ;DO CONO
JRST RSKP ;LOSE
RHRD1: TLZ T1,(LR) ;CLEAR LR BIT
RHWT1: TSO T1,P2 ;INSERT UNIT NUMBER
CALL XIO1 ;SET IOA
DATAO .-.,T1 ;SEND TO DEVICE
CALL XIO1 ;SET IOA
DATAI .-.,T1 ;READ REG
RET
RHCI1: CALL XIO1 ;SET IOA
CONI .-.,T1 ;DO CONI
RET
RHCO1: CALL XIO1 ; SET IOA
CONO .-.,(T1) ;DO CONO
RET
XIO1: MOVEI F,RH0_-2(P1) ;PRODUCE DEVICE CODE
IOXCT: DPB F,[POINT 7,@(P),9] ;PLUG IOADDR
RET ;EXECUTE INSTR
> ;END IFE SMFLG
IFN SMFLG,<
CHKUNI: MOVEI T2,RH1CLR ;CHECK FOR NON EXIST DISK
WRIO T2,@RPCS2(P1)
WRIO P2,@RPCS2(P1) ;SELECT DISK
RDIO T2,@RPCS1(P1) ;FORCE ERROR
MOVEI T2,RH.NED ;CHECK FOR ERROR
TIOE T2,@RPCS2(P1) ;CHECK STATUS
RETSKP ;NO -- NO DISK HERE
RDIO T2,@RPDT(P1) ;YES -- GET DRIVE TYPE
RET
> ; END IFN SMFLG
IFE FT.MTA, <
FTAP: DMOVE T1,[SIXBIT /KI-NO TAPE/]
JRST ERRTYP
> ; END OF IFE FT.MTA
IFN FT.MTA,<
FTAP:
IFN FT.DX2,<
CALL LALLDX ;LOAD MICROCODE INTO ALL DX20S
>;END IFN FT.DX2
SETZB P1,P2 ;START AT CHAN 0, ADDR 0
GETTCH: CALL CHKCHN ;DOES THIS CHANNEL EXIST?
JRST GOTTCH ;YES - TRY UNITS
NXTTCH: AOS P1 ;NO - NEXT CHANNEL
CAIG P1,MAXCHN ;OUT OF CHANNELS
JRST GETTCH ;NO - TRY THIS ONE
DMOVE T1,[SIXBIT /NO RDY DRIVE/]
JRST ERRTYP ;COMPLAIN
GOTTCH: CALL CHKUNI ;GET DEV TYPE IN T2, IF EXTANT
JRST GOTTUN ;EXISTS - GO CHECK TYPE
NXTTUN: AOS P2 ;NEXT CONTROLLER
CAIG P2,7 ;ANY MORE
JRST GOTTCH ;YES - SEE IF THIS WINS
SETZ P2, ;NO - TRY NEXT CHANNEL
JRST NXTTCH ; ...
GOTTUN: ANDI T2,777 ;ISOLATE CONTROLLER TYPE
SETZ P3, ;START AT UNIT 0
IFN FT.DX2,<
MOVEI P6,DX.IDX ;SET DEVICE INDEX FOR DX20
CAIN T2,.DXTYP ;DX20?
JRST GOTDX2 ;YES, PROCESS IT
>
MOVEI P6,TM.IDX ;TRY TM02/TM03
CAIL T2,10 ;SEE IF TM02
CAIL T2,17 ; ...
SKIPA ;NOT A TM02
JRST NXTTDR ;ITS A TM02
CAIL T2,50 ;SEE IF A TM03
CAIL T2,57 ; ...
JRST NXTTUN ;NOT A TM03
NXTTDR: MOVSI T1,(.TMTCR!LR) ;PREPARE TO SELECT UNIT
IOR T1,P3 ;INSERT UNIT NUMBER
IFE SMFLG,<
CALL RHWT1 ;INSERT KON, SEND TO CHN
MOVSI T1,(.TMDSR) ;READ DEVICE STATUS
CALL RHRD1 ; ...
> ;END SMFLG
IFN SMFLG,<
WRIO P2,@RPCS2(P1) ;WRITE UNIT
WRIO T1,@RPDC(P1) ;SET SLAVE
RDIO T1,@RPDS(P1) ;READ DRIVE STATUS
> ;END IFN SMFLG
TRNE T1,TMSMOL ;DEVICE READY?
JRST GOTTDR ;YES!!
AOS P3 ;NO - TRY NEXT DRIVE
CAIG P3,7 ;ANY MORE?
JRST NXTTDR ;YES
SETZ P3, ;NO - TRY NEXT KON
JRST NXTTUN ; ...
IFN FT.DX2,<
;FOUND A DX20, FIND A READY DRIVE
GOTDX2: CALL STDX20 ;START DX20 (MASSBUS RESET HALTS IT)
GTDX2A: MOVE T1,P3 ;GET DRIVE NUMBER
TXO T1,<.TDDNR!LR> ;DRIVE NUMBER REG
CALL RHWT1 ;SELECT THIS DRIVE
MOVE T1,[EXP .TMCSR!LR+.TMRWF]
CALL RHWT1 ;DO REWIND
CALL DX2SWT ;SHORT WAIT
JRST GTDX2B ;FAILED - DRIVE IS NOT READY
MOVX T1,.TDSTR ;GET THE STATUS REGISTER
CALL RHRD1 ; ...
TRNE T3,.TDDEB ;AT LOAD POINT YET?
JRST GOTTD1 ;YES
GTDX2C: CALL DX2LWT ;NO, DO A LONG WAIT
JRST GTDX2B ;ERROR, THIS DRIVE FAILS
MOVX T1,.TDAYR ;GET ASYNCHRONOUS STATUS
CALL RHRD1
TXNN T1,.TDDEB ;DEVICE END?
JRST TAPERR ;NO, DON'T KNOW WHAT'S HAPPENING
ANDI T1,377 ;JUST THE DRIVE NUMBER
CAMN T1,P3 ;RIGHT DRIVE?
JRST GOTTD1 ;YES, GOOD DRIVE
MOVX T1,.TDAYR ;NO, CLEAR ASYNCHRONOUS STATUS REG
CALL RHWT1 ; ...
JRST GTDX2C ;AND WAIT SOME MORE
GTDX2B: AOS P3 ;TRY THE NEXT DRIVE
CAIG P3,7 ;MORE DRIVES ON THIS CONTROLLER?
JRST GTDX2A ;YES
JRST NXTTUN ;NO, TO THE NEXT CONTROLLER
;ROUTINE TO LOOK FOR AND LOAD MICROCODE INTO ALL
; DX20S ON THE SYSTEM
;
LALLDX: SETZB P1,P2 ;START WITH CHANNEL 0, ADDR 0
LALLD1: CALL CHKCHN ;DOES THIS CHANNEL EXIST?
JRST LALLD3 ;YES, SEE IF ANY DX20S OUT THERE
LALLD2: ADDI P1,1 ;NO, LOOK AT THE NEXT CHANNEL
CAIG P1,MAXCHN ;LOOKED AT ALL THE CHANNELS?
JRST LALLD1 ;NO, LOOK AT NEXT CHANNEL
RET ;ALL DONE
LALLD3: CALL CHKUNI ;SEE WHAT EXISTS ON THIS CHANNEL
JRST LALLD5 ;SOMETHING THERE, GO SEE IF DX20
LALLD4: ADDI P2,1 ;NEXT CONTROLLER
CAIG P2,7 ;LOOKED AT ALL CONTROLLERS?
JRST LALLD3 ;NO, LOOK AT NEXT ONE
SETZ P2, ;CONTROLLER 0
JRST LALLD2 ;GO LOOK AT NEXT CHANNEL
LALLD5: ANDI T2,777 ;ISOLATE CONTROLLER TYPE
CAIN T2,.DXTYP ;DX20?
CALL LODX20 ;YES, LOAD MICROCODE INTO IT
JRST LALLD4 ;GO LOOK AT NEXT CONTROLLER
>;END IFN FT.DX2
GOTTDR: MOVE T1,[EXP .TMCSR!LR+.TMRWF]
IFE SMFLG,<
CALL RHWT1 ;DO REWIND
MOVSI T2,10000 ;WAIT COUNT
CALL WTRDY1 ;WAIT FOR READY
>
GOTTD1: SETOM DIORG ;FLAG MAGTAPE
MOVEM P6,TAPTYP ;SAVE TYPE TYPE FOR LATER
SETZM MAXUNI ;HIGHEST NUMBERED UNIT
MOVE T2,P1 ;GET CHAN
LSH T2,6 ;SHIFT
IOR T2,P2 ;WITH KONTROLLER
LSH T2,6 ;AGAIN
IOR T2,P3 ;AND SUBUNIT
TLO T2,(1B0) ;SET NEGATIVE
MOVEM T2,DSKTAB ;STORE
JRST FOUND ;WIN.
WTRDY: MOVSI T2,5 ;TIMEOUT COUNTER
WTRDY1: MOVSI T1,(.TMDSR) ;WAIT FOR DRIVE READY
IFE SMFLG,<
CALL RHRD1 ; ...
> ;END IFE SMFLG
IFN SMFLG,<
WRIO T1,@RPDS(P1)
> ;END IFN SMFLG
TRNE T1,TMSPIP ; ...
SOJG T2,WTRDY1 ;TIMED LOOP
PUSH P,T1 ;SAVE STATUS REG
MOVE T1,[EXP .TMATR!LR+377] ;RESET ALL ATTENTION FLAGS
IFE SMFLG,<
CALL RHWT1 ; ...
> ;END IFE SMFLG
IFN SMFLG,<
WRIO T1,@RPAS(P1) ;WRITE ATTENTION SUMMARY
> ;END SMFLG
POP P,T1 ;RESTORE STATUS REG
JUMPE T2,TAPERR ;LOSE
RET ;WIN
IFN FT.DX2,<
;DX20 WAIT ROUTINES
DX2LWT: SKIPA T2,[10000,,0] ;LONG WAIT
DX2SWT: MOVEI T2,2000 ;SHORT WAIT
DX2WAT: MOVX T1,.TMDSR ;GET THE STATUS REGISTER
CALL RHRD1 ; ...
TXNN T1,.TDATB ;ATTENTION UP?
SOJG T2,DX2WAT ;NO, WAIT
PUSH P,T1 ;SAVE THE STATUS
MOVE T1,[EXP .TMATR!LR+377]
CALL RHWT1 ;TURN OFF ATTENTION
POP P,T1 ;GET BACK THE STATUS
JUMPE T2,TAPERR ;LOSE IF TIMED OUT
TXNN T1,.TDCEB ;ANY ERRORS?
RETSKP ;NO, SKIP RETURN
MOVX T1,<.TMERR!LR> ;YES, CLEAR THE ERROR REGISTER
CALL RHWT1
RET ;AND GIVE AN ERROR RETURN
> ;END IFN FT.DX2
> ;END IFN FT.MTA
FOUND:
MOVE T1,FNDCMD ;POINTER TO CMD
JSP CX,VBOOT ;PERFORM IT
JRST ERRTYP ;ERROR
JRST GETCOM ;NO ERRORS - REPEAT
ERRTYP: PUSH P,T2 ;SAVE SECOND HALF OF ERRMES
MOVEI Q1,"?" ;TYPE QM
CALL TYO ; ...
CALL SIXTYP ;OUTPUT T1 IN SIXBIT
POP P,T1 ;GET 2ND PART
CALL SIXTYP ;OUTPUT IT
JRST GETCM1 ; GO RESTART
IFN FT.DX2,<
;LOAD, VERIFY AND START DX20 MICRO CODE
LODX20: SKIPE NOLDDX ;SHOULD THE DX20 BE LOADED?
RET ;NO
MOVEI T1,042562 ;THIS MAGIC CODE
MOVEM T1,DXMC##+11 ; GOES INTO LOC 11 OF THE RAM
MOVEI Q1,DXLDFT ;SET FUNCTION TABLE
CALL LDX20 ;LOAD THE RAMS
MOVEI Q1,DXVRFT ;SET VERIFY FUNCTION TABLE
CALL LDX20 ;GO VERIFY THE WORKING MEMORY
PUSH P,T1 ;SAVE THE VERSION NUMBER
CALL STDX20 ;START THE DX20
CALL TYPDX2 ;TYPE OUT DX20 AND CHANNEL NUMBERS
MOVEI Q2,[ASCIZ \MICROCODE VERSION \]
CALL OUTSTR ;WE DID IT!
LDB Q2,[POINT 6,(P),25] ;PICK UP THE VERSON NUMBER
CALL OUTOCT ;TYPE IT
POP P,Q2 ;GET THE EDIT LEVEL
ANDI Q2,1777
MOVEI Q1,"(" ;AND TYPE IT
CALL TYO
CALL OUTOCT
MOVEI Q1,")"
CALL TYO
MOVEI Q2,[ASCIZ \ LOADED, VERIFIED, AND STARTED\]
CALL OUTSTR ;SAY WE DID IT
CALLRET CRLF ;DONE
;ROUTINE TO START THE DX20
;
STDX20: MOVEI T1,1+.TDICB+.TDPIB+.TDPEB ;SET STARTING ADDRESS
TXO T1,.TDPCR!LR ;INTO THE PC
CALL RHWT1
MOVEI T1,.TDSTB ;START THE DX20
TXO T1,.TDMNR!LR
CALLRET RHWT1
;LOAD FUNCTION TABLE
DXLDFT: .TDPCR!LR+.TDCIB+.TDPEB ;PC BITS FOR CRAM LOADING
RHWT1 ;CRAM FUNCTION IS WRITE
[ ;WORKING MEMORY FUNCTION
TRO T1,11400 ; SET INSTRUCTION TO MOVI TO BR WITH MA+
CALLRET XI] ; DO THE INSTRUCTION
;VERIFY FUNCTION TABLE
DXVRFT: .TDPCR!LR+.TDICB+.TDPEB ;PC BITS FOR CRAM READING
[ ;CRAM VERIFY FUNCTION
HRRZ T3,T1 ; SAVE THE EXPECTED VALUE
CALL RHRD1 ; GET CRAM CONTENTS
ANDI T1,177777 ; ONLY WANT 16 BITS
CAIN T3,(T1) ; VERIFY MATCH
RET ; MATCH, GOOD RETURN
JRST NOVERC] ; NO MATCH, TYPE ERROR
[ ;WORKING MEMORY FUNCTION
HRRZ T3,T1 ; SAVE THE EXPECTED VALUE
MOVEI T1,043411 ; INSTRUCTION TO MOVE DATA TO BR
CALL XI ; EXECUTE IT
MOVX T1,.TDIBR ; GET THE BR
CALL RHRD1 ; ...
ANDI T1,377 ; ONLY THE BR
CAIN T3,(T1) ; MATCH?
RET ; YES, GOOD RETURN
JRST NOVERW] ; NO, COMPLAIN
;LOAD OR VERIFY DX20 MICRO CODE
;CALL WITH Q1 POINTING TO FUNCTION TABLE
LDX20: MOVSI T2,-DXMCSZ## ;GET LENGTH OF MICRO CODE
LDX20A: SKIPGE DXMC##(T2) ;GET A CRAM WORD
JRST LDX20B ;NO MORE CRAM DATA
HRRZ T1,T2 ;GET THE PC
IOR T1,0(Q1) ;SET DESIRED PC BITS
CALL RHWT1 ;SET THE PC
MOVE T1,DXMC##(T2) ;PICK UP THE CRAM DATA
ANDI T1,177777 ;JUST THE LOW 16 BITS
TXO T1,.TDIRR!LR ;INTO THE IR
CALL @1(Q1) ;CALL THE PROCESSING ROUTINE
AOBJN T2,LDX20A ;LOOP FOR MORE
LDX20B: AOBJP T2,RSKP ;SKIP THE DELIMITER WORD
MOVEI T1,.TDICB+.TDPEB ;SET PC BACK TO 0
TXO T1,.TDPCR!LR ;PC REGISTER
CALL RHWT1
MOVX T1,.TDIRR ;GET CONTENTS OF LOCATION 0
CALL RHRD1
PUSH P,T1 ;SAVE IT
MOVEI T1,1000 ;SET MEMORY ADDRESS TO 0
CALL XI
MOVEI T1,400
CALL XI
LDX20C: MOVE T1,DXMC##(T2) ;PICK UP A DATA WORD
ANDI T1,377 ;ONLY 8 BITS OF DATA
CALL @2(Q1) ;CALL PROCESSING ROUTINE
AOBJN T2,LDX20C ;LOOP THROUGH THE WHOLE THING
MOVEI T1,.TDPEB+.TDCIB ;BACK TO LOCATION 0 OF THE CRAM
TXO T1,.TDPCR!LR
CALL RHWT1
POP P,T1 ;GET BACK ITS ORIGINAL CONTENTS
ANDI T1,177777 ;ONLY 16 BITS
TXO T1,.TDIRR!LR ;PUT IT BACK INTO THE CRAM
CALLRET RHWT1
;MAKE DX20 EXECUTE INSTRUCTION IN T1
XI: PUSH P,T1 ;SAVE THE INSTRUCTION FOR A MOMENT
MOVEI T1,.TDSCB ;PUT DX20 INTO SINGLE CYCLE
TXO T1,.TDMNR!LR
CALL RHWT1
MOVEI T1,.TDPEB+.TDCIB ;SET PC 0
TXO T1,.TDPCR!LR
CALL RHWT1
POP P,T1 ;GET BACK THE INSTRUCTION
TXO T1,.TDIRR!LR ;PUT INTO CRAM
CALL RHWT1
MOVEI T1,.TDICB+.TDPIB ;TURN ON THE CRAM
TXO T1,.TDPCR!LR
CALL RHWT1
MOVEI T1,.TDSCB+.TDSTB ;CYCLE THE DX20
TXO T1,.TDMNR!LR
CALL RHWT1
MOVX T1,.TDMNR!LR ;TURN SINGLE CYCLE OFF
CALLRET RHWT1 ;AND RETURN
;COMPLAIN ABOUT A VERIFY MISMATCH
NOVERC: DMOVE Q2,[SIXBIT \CRAM VERIFY\]
JRST NOVER
NOVERW: DMOVE Q2,[SIXBIT \WORK MEM VER\]
NOVER: PUSH P,T1 ;SAVE A REGISTER
MOVEI Q1,"?" ;TYPE A QM
CALL TYO
CALL TYPDX2 ;TYPE OUT DX20 AND CHANNEL NUMBERS
CALL SIXTP1 ;TYPE THE FIRST 6 CHARACTERS
MOVE Q2,Q3 ;GET THE NEXT 6 CHARACTERS
CALL SIXTP1 ;AND TYPE THEM
CALL CRLF ;NEXT LINE
MOVE Q2,[SIXBIT \GOOD \]
CALL SIXTP1 ;INTRODUCE SOME DATA
MOVE Q2,T3 ;FIRST WHAT IT SHOULD BE
CALL NOVERO ;TYPE OCTAL DATA
MOVE Q2,[SIXBIT \ BAD\]
CALL SIXTP1 ;TYPE THE NEXT HEADING
MOVE Q2,(P) ;GET THE BAD DATA
CALL NOVERO ;AND TYPE IT
MOVE Q2,[SIXBIT \ XOR\]
CALL SIXTP1 ;TYPE HEADING FOR XOR
POP P,Q2 ;GET THE BAD DATA
XOR Q2,T3 ;GET THE XOR
CALL NOVERO ;TYPE IT
RET ;RETURN
NOVERO: MOVEI Q1,40 ;FIRST TYPE A BLANK
MOVE Q3,[POINT 3,Q2,17] ;POINT TO THE DATA
NOVROL: CALL TYO ;TYPE A CHARACTER
TLNN Q3,770000 ;ANY MORE DATA?
RET ;NO, RETURN
ILDB Q1,Q3 ;YES, PICK UP NEXT DIGIT
OUTOC1: ADDI Q1,60 ;CONVERT TO ASCII
JRST NOVROL ;TYPE IT
OUTOCT: MOVE Q3,[POINT 3,Q2,17] ;POINT TO THE DATA
ILDB Q1,Q3 ;PICK UP A DIGIT
TLNE Q3,770000 ;IF NOT LAST DIGIT,
JUMPE Q1,OUTOCT+1 ; LOOK FOR NON-ZERO DIGIT
JRST OUTOC1 ;GO TYPE IT
OUTSTR: HRLI Q2,(POINT 7,) ;MAKE ADDRESS INTO BYTE POINTER
OUTST1: ILDB Q1,Q2 ;PICK UP A CHARACTER
JUMPE Q1,R ;IF DONE, RETURN
CALL TYO ;OTHERWISE, TYPE IT
JRST OUTST1 ;AND LOOP FOR MORE
TYPDX2: PUSH P,Q2 ;PRESERVE Q2
MOVEI Q2,[ASCIZ \CHN:\]
CALL OUTSTR ;OUTPUT CHN:
MOVE Q2,P1 ;GET CHANNEL NUMBER
CALL OUTOCT ;OUTPUT CHANNEL NUMBER
MOVEI Q2,[ASCIZ \ DX20:\]
CALL OUTSTR ;OUTPUT DX20:
MOVE Q2,P2 ;GET DX20 NUMBER
CALL OUTOCT ;OUTPUT IT
MOVEI Q1," " ;A SPACE
POP P,Q2 ;RESTORE Q2
CALLRET TYO ;OUTPUT A SPACE AND RETURN
>;END IFN FT.DX2
DPLUNI: DMOVE T1,[SIXBIT /DUPL STR UNI/]
JRST ERRTYP
MISUNI: DMOVE T1,[SIXBIT /MISSING UNIT/]
JRST ERRTYP
BADSTR: DMOVE T1,[SIXBIT /HOM BLKS BAD/]
JRST ERRTYP
DSKERR: DMOVE T1,[SIXBIT /DISK ERROR/]
JRST ERRTYP
TAPERR: DMOVE T1,[SIXBIT /TAPE ERROR/]
JRST ERRTYP
PFERR: AOS A%EPT+UPTPFO ;THE PC OF THE FAULT
JRST @<A%EPT+UPTPFO> ;PROCEED
CHKHOM: MOVE T1,HOMNAM ;CHECK BLOCK NAME
CAME T1,[SIXBIT 'HOM']
RET ;BAD
MOVE T1,HOMCOD ;CHECK BLOCK CODE
CAIE T1,CODHOM ;...
RET ;BAD
MOVE T1,HOMSNM ;CHECK STR NAME
CAME T1,STRNAM ;...
RET ;NO MATCH
MOVE T1,HOMLUN ;GET LOGICAL UNIT
SKIPE DSKTAB(T1) ;IS THERE ALREADY AN ENTRY?
JRST DPLUNI ;YES - LOSE, DUPLICATE UNITS
HRRZM P2,DSKTAB(T1) ;STORE UNIT NUMBER
MOVEI T2,ENTFLG(P1) ;GET CHANNEL & ENTRY-IN-USE FLAG
HRLM T2,DSKTAB(T1) ;STORE CHANNEL NUMBER
HLRZ T1,T1 ;GET # UNI IN STR
SOS T1
SKIPN MAXUNI ;ALREADY SET?
MOVEM T1,MAXUNI ;NO - SET
CAME T1,MAXUNI ;SAME AS OTHERS?
JRST BADSTR ;NO - LOSER
MOVE T2,HOMRXB ;GET ROOT XB
SKIPN DIORG ;ALREADY SET?
MOVEM T2,DIORG ;YES - LET IT BE
CAME T2,DIORG ;SAME AS OTHER
JRST BADSTR ;NO - LOSE
RSKP:
CPOPJ1: AOS (P) ;SKIP RETURN
R:
CPOPJ: RET
;STRING READ FROM CONSOLE
GETSTR: MOVE Q3,[POINT 7,D$ISTR] ;OUTPUT POINTER
MOVE T1,Q3 ;SAVE - THIS IS OUR VALUE
SKIPE T2,LODTYP ;DIALOGUE LOAD? SKIP IF SO.
JRST GETST1 ;NO. GO PROCESS BITS
GET.W: CALL TYI ;READ A CHARACTER
CAIN Q1,"U"-100 ;CONTROL-U?
JRST [ MOVSI T1,'XXX' ;YES - OUTPUT LINE DELETE
CALL SIXTYP
JRST GETCOM] ;AND GET ANOTHER LINE
CAIN Q1,177 ;RUBOUT?
JRST [ PUSH P,T1 ;YES = START THE DELETE
LDB Q1,Q3 ;GET THE LAST CHARATER
HRROI T1,-1 ;BACKUP THE BYTE POINTER
CAME Q3,[10700,,D$ISTR-1] ;HAVE WE?
CAMN Q3,[POINT 7,D$ISTR] ;HAVE WE?
JRST [ MOVEI Q1,7 ;YES - RING THE BELL
CALL TYO ;OUTPUT THE BELL
POP P,T1
JRST GET.W] ;GET NEXT CHARACTER
ADJBP T1,Q3
CALL TYO ;OUTPUT THE CHARACTER LAST TYPED
MOVEI Q1,"\" ;AND THE BACK-SLASH
CALL TYO ;TYPE IT
MOVEM T1,Q3 ;RESET BYTE POINTER
POP P,T1
JRST GET.W] ;GET NEXT CHARACTER
CAIL Q1,140 ;LOWER CASE?
SUBI Q1,40 ;YES, MAKE UPPER
CAIN Q1,15 ;EOL?
JRST GET.EL ;YES - FINISH OUT
IDPB Q1,Q3 ;STORE CHARACTER
CAIE Q1,":" ;DEV NAME TERM?
JRST GET.W ;NO - LOOP
MOVEM T1,DEV ;YES - SET FLAG
MOVE T1,Q3 ;NEW COMMAND PTR
JRST GET.W ;LOOP FOR MORE
GET.EL: IDPB Q1,Q3 ;STORE CR
CALL CRLF ;ECHO CRLF
GET.E1: SETZI T2, ;TERMINATING NULL
IDPB T2,Q3 ; STORE
RET ;RETURN
SIXTYP: MOVE Q2,T1 ;COPY WORD
SIXTP1: SETZ Q1, ;INIT Q1
LSHC Q1,6 ;PEEL OFF A CHR
ADDI Q1,40 ;CONVERT TO ASCII
CALL TYO ;TYPE OUT
JUMPN Q2,SIXTP1 ;LOOP IF NOT BLANK
RET
CRLF: MOVEI Q1,215 ;CR WITH PARITY
CALL TYO ;TYPE OUT
MOVEI Q1,12 ;LF
CALLRET TYO
;KLINIT HAS REQUESTED SPECIAL LOAD. PROCESS THE BITS
GETST1: TXZE T2,F11.DM ;WANT DUMP?
JRST [ MOVE T3,[BYTE (7) "/","D",.CHCRT,0]
JRST GETST3]
TXZE T2,F11.LD ;WANT STANDARD LOAD?
JRST [ MOVE T3,[BYTE (7) .CHCRT,0]
JRST GETST3]
GETST3: MOVEM T3,D$ISTR ;STASH THE STRING
MOVEM T2,LODTYP ;STASH REMAINING FLAGS
RET ;AND DONE
IFN FT.UDB,<
;USER MODE CONSOLE DRIVERS
TYO: PUSH P,T1 ;PRESERVE T1
MOVE T1,Q1 ;COPY CHAR
PBOUT ;OUTPUT IT
POP P,T1 ;RESTORE T1
RET
TYI: PUSH P,T1 ;SAVE T1
PBIN ;READ A CHAR
CAIN T1,37 ;EOL?
MOVEI T1,15 ;YES - TURN TO CR
MOVE Q1,T1 ;RETURN IN STANDARD AC
POP P,T1 ;RESTORE T1
RET
> ;END IFN FT.UDB
.DTTYO==10B27 ;FUNCTION CODE FOR TYPE OUT, CHAR IN LOW BITS
.DTMMN==11B27 ;FUNCTION CODE FOR MONITOR MODE ON
;EPT LOCS
DTEFLG=A%EPT+444 ;OPERATION COMPLETE FLAG
DTEF11=A%EPT+450 ;PDP11 TO PDP10 ARGUMENT
DTECMD=A%EPT+451 ;-10 TO -11 COMMAND WORD
DTEOPR=A%EPT+453 ;OPERATION IN PROGRESS FLAG
DTEMTD==A%EPT+455 ;MONITOR OUTPUT DONE WHEN NONZERO
DTEMTI==A%EPT+456 ;0 IF READY FOR ANOTHER CHAR FROM 11
DTEN==4 ;NUMBER OF DTE'S
;DTE20 HARDWARE
DTE==200 ;DEVICE CODE
DTEPRV==1B20 ;PRIVILEGED/RESTRICTED BIT IN CONI
PI0ENB==1B32 ;ENABLE PI 0
PIENB==1B31 ;SET PI ASSIGNMENT
TO11DB==1B22 ;TO 11 DOORBELL
IFE FT.UDB,<
IFN KLFLG,<
IFE SMFLG,<
;KL10 CONSOLE ROUTINES
;TELETYPE INPUT
TYI: SKIPN DTEMTI ;INPUT READY
JRST TYI ;NO - LOOP
MOVE Q1,DTEF11 ;GET CHAR
CALL TYO ;ECHO IT
MOVE Q1,DTEF11 ;GET CHAR AGAIN
SETZM DTEMTI ;RESET INPUT DONE FLAG
RET
;TELETYPE OUTPUT
TYO: SETZM DTEMTD ;CLEAR OUTPUT DONE FLAG
TRO Q1,.DTTYO ;LIGHT FUNCTION BI
MOVEM Q1,DTECMD ;STORE FOR 11
MOVEI Q1,TO11DB ;RING DOORBELL
XCT DTCNOW ;DO IT
SKIPN DTEMTD ;DONE YET?
JRST .-1 ;NO
RET ;YES
> ; END IFE SMFLG
> ; END IFN KLFLG
IFN SMFLG,<
TYI: MOVE Q1,CTYIWD ;CHECK FOR INPUT READY
TRNN Q1,CTYIRD ;CHECK INPUT WORD
JRST .-2 ;NO INPUT YET
SETZM CTYIWD ;CLEAR FLAGS
CONO APR,AP.SET!AP.INE ;INTERRUPT 8080
TYO: PUSH P,T1 ;SAVE A REGISTER
MOVE T1,CTYOWD ;CHECK FOR READY
TRNE T1,CTYORD ;OUTPUT WORD
JRST .-2 ;NOT READY YET
IORI Q1,CTYORD ;INSURE NOT READY FLAG SET
MOVEM Q1,CTYOWD ;OUTPUT WORD
ANDI Q1,177 ;MASK TO USEFUL STUFF
CONO APR,AP.SET!AP.INE ;INTERRUPT 8080
POP P,T1 ;RESTORE
RET
> ; END IFN SMFLG
> ;END IFE FT.UDB
IFE FT.MTA, <
IFN FT.RP,<
RD0: MOVSI T3,(700000,,0) ;RP10 RECAL OP
DPB P1,[POINT 3,T3,5] ;STORE UNIT
CALL DOOP ;DO OPERATION
MOVEI T3,ICCW ;RP10 READ OP FOR PAGE 0
RD1A: SETZM ICCW+1 ;HALT CCW
DPB P1,[POINT 3,T3,5]
CALL DOOP
RET
RD1: MOVEI T3,4B23+ICCW ;READ COMMAND FOR PAGE 1
JRST RD1A
RD10: MOVEI T3,1B18+ICCW ;SECTOR 0, SURF 1
JRST RD1A ;JOIN OTHER CODE
DOOP: MOVEI T2,^D5 ;RETRY COUNTER
DOOP1: DATAO DPC,[500000,,776] ;CLEAR ATTN
MOVEI T1,^D50000 ;WAIT COUNT
DATAO DPC,T3 ;SEND OP
CONSO DPC,10 ;DONE?
SOJG T1,.-1 ;NO - WAIT
JUMPLE T1,DOOP2 ;ERROR - RETRY
CONSO DPC,177720 ;ERRORS?
RET
DOOP2: CONO DPC,175710 ;CLEAR FLAGS
SOJG T2,DOOP1 ;RETRY IF NOT TOO MANY
JRST DSKERR
> ;END IFN FT.RP
IFE SMFLG,<
; ROUTINE TO READ PAGE CONTAINING BACKUP HOME BLOCK
;
; ACCEPTS IN P1/ CHANNEL NUMBER
; P2/ UNIT NUMBER
; CALL RD10
; RETURNS +1 IF NO ERRORS, ELSE GOES TO DSKERR
RD10:
IFN FT.RP,<
SKIPA P4,[R4%DST!LR!0B27!^D10B35] ;DESIRED SECTOR AND TRACK
> ; END OF IFN FT.RP
IFE FT.RP, <
SKIPA P4,[.RHSBR!LR!0B27!^D10B35] ;DESIRED SECTOR AND TRACK
> ; END OF IFE FT.RP
;..
; ROUTINE TO READ PAGE 0
;
; ACCEPTS IN P1/ CHANNEL NUMBER
; P2/ UNIT NUMBER
; CALL RD0
; RETURNS +1 IF NO ERRORS, ELSE GOES TO DSKERR
RD0:IFN FT.RP, <
MOVE P4,[R4%DST!LR!0] ;DESIRED SECTOR=0, TRACK=0
> ; END OF IFN FT.RP
IFE FT.RP, <
MOVE P4,[.RHSBR!LR!0B27!0B35] ;RH20 XFR CONTROL REGISTER
> ; END OF IFE FT.RP
MOVEI T3,NRETRY ;MAX TIMES TO RETRY THIS OPERATION
RD00: MOVE T1,[R4%CSR!LR!R4%CRC!GO] ;RECALIBRATE FUNCTION
CALL RHWT1 ;GO RECALIBRATE DRIVE
RD0A: MOVX T1,R4%DSR ;RP04 DEVICE STATUS REGISTER
CALL RHRD1 ;GET DRIVE STATUS
TXNN T1,R4%DRY ;RECALIBRATE FINISHED ?
JRST RD0A ;NO, GO WAIT TILL DONE
MOVE T1,[R4%CSR!LR!R4%RIP!GO] ;READ-IN PRESET FUNCTION
CALL RHWT1 ;INITIALIZE DRIVE
READX: SETZM ICCW+1 ;CHANNEL HALT COMMAND
IFN FT.RP, <
MOVE T4,[RH%XFR!LR!<ICCW_-1>B28!R4%CRD!GO] ;INITIATE TRANSFER REGISTER
> ; END OF IFN FT.RP
IFE FT.RP, <
MOVE T4,[.RHSTR!LR!RCLP!STLW!R4%CRD!GO] ;RH20 XFR CONTROL REGISTER
MOVNI T1,N.BKPG*1 ;ONE PAGE
DPB T1,[POINT 10,T4,29] ;ADD -BLOCK COUNT
> ; END OF IFE FT.RP
;..
; ROUTINE TO DO A DATAO TO THE RP04
; ACCEPTS IN T4/ DATAO DATA
; P1/ CHANNEL NUMBER
; P2/ UNIT NUMBER
; P4/ POSITION SELECT WORD
; RETURNS + 1 IF NO ERRORS, ELSE GOES TO DSKERR
DOOP0: MOVE T1,P4 ;GET POSITION SELECT WORD
CALL RHWT1 ;WRITE IT
MOVE T1,T4 ;GET TRANSFER WORD
MOVEI T2,TIMOUT ;GET TIMEOUT COUNT
CALL RHWT1 ;GO DO THE DATAO
DOOP1: CALL RHCI1 ;GO GET CONI BITS
TXNN T1,.RHDON ;OPERATION COMPLETE ?
SOJG T2,DOOP1 ;NO, LOOP TILL DONE
MOVEI T1,.RHRAE!.RHCTE!.RHMBE!.RHDON
CALL RHCO1 ;CLEAR OUT CHANNEL GRACEFULLY
JUMPLE T2,DOOP2 ;OPERATION EVER FINISH ?
MOVX T1,R4%DSR ;YES, SET UP TO GET DEVICE STATUS
CALL RHRD1 ;GO GET DEVICE STATUS
TXNE T1,R4%ERR ;CHECK COMPOSITE ERROR INDICATOR
JRST DOOP2 ;THE CRUMMY DRIVE SCREWED UP
CALL RHCI1 ;GO GET CONI BITS
TXNN T1,RHERR ;ANY ERRORS ?
RET ;ALL DONE, RETURN
DOOP2: MOVEI T1,.RHMBR+.RHMBE+.RHCTE+.RHSTP ;GET MASSBUS RESET AND ENABLE BITS
CALL RHCO1 ;DO CONO TO CHANNEL
MOVEI T1,.RHMBE ;GET MASSBUS ENABLE
CALL RHCO1 ;ENABLE CHANNEL
MOVE T1,[R4%ATN!LR!377] ;RP04 ATTENTION REGISTER
CALL RHWT1 ;CLEAR ATTENTION
SOJG T3,RD00 ;TRY IT ALL OVER AGAIN
RET ;CATCH ERROR LATER
> ;END IFE SMFLG
IFN SMFLG,<
RD10: SKIPA P4,[^D10] ;READ BLOCK 10
RD0: SETZ P4, ;READ BLOCK 0
MOVEI T3,NRETRY ;SET UP RETRY
RD00: MOVEI T1,R4%CRC!GO ;DO A DRIVE CLEAR
WRIO T1,@RPCS1(P1)
MOVEI T1,R4%DRY ;WAIT FOR READY
TION T1,@RPDS(P1)
JRST .-1
MOVEI T1,R4%RIP!GO ;NO DO READIN PRESET
WRIO T1,@RPCS1(P1)
WRIO P4,@RPDA(P1) ;SET DISK ADDRESS
MOVNI T1,RPPGSZ ;SET PAGE SIZE
WRIO T1,@RPWC(P1)
SETZ T1,0 ;SET DEVICE CORE ADDRESS
WRIO T1,@RPBA(P1) ;SET CORE ADDRESS
MOVE T1,ICCW
LSH T1,-9 ;FIND PAGE ADDRESS
ANDI T1,77777
IORI T1,UNVBIT!UN36B ;SET UNIBUS VALID BIT
WRIO T1,@UNBMAP(P1) ;SET MAP
MOVEI T1,R4%CRD!GO ;DO THE READ
WRIO T1,@RPCS1(P1) ;READ
MOVEI T1,R4%DRY ;SET UP READY
MOVEI T2,TIMOUT ;CHECK FOR TIMEOUT
DOOP1: TION T1,@RPCS1(P1) ;WAIT FOR DONE
SOJG T2,DOOP1
RDIO T1,@RPCS1(P1) ;CHECK STATUS
TRNE T1,R4%ERR ;ERROR?
SOJG T3,RD00 ;YES TRY AGAIN
RET ;NO RETURN
;
> ;END IFN SM10
> ;END IFE FT.MTA
IFN SMFLG,<
;
;R11CHT: THIS IS THE "CHANNEL" TABLE FOR THE RH11'S
; THERE SHOULD BE ONE ENTRY FOR EACH REGISTER OF EACH
; RH11. EACH RH11 IS TO BE CONSIDERED A CHANNEL
; AND THIS TABLE IS USUALLY USED INDEXED.
RH11CH:
RPCS1: R0%CS1 ;STATUS 1
R1%CS1
RPWC: R0%WC ;WORD COUNT
R1%WC
RPBA: R0%BA ;BUS ADDRESS
R1%BA
RPDA: R0%DA ;DISK ADDRESS (SECTOR AND TRACK)
R1%DA
RPCS2: R0%CS2 ;STATUS 2
R1%CS2
RPDS: R0%DS ;DRIVE STATUS
R1%DS
RPER1: R0%ER1 ;ERROR REGISTER 1
R1%ER1
RPAS: R0%AS ;ATTENTION SUMMARY REGISTER
R1%AS
RPDT: R0%DT ;DRIVE TYPE REGISTER
R1%DT
RPDC: R0%DC ;DESIRED CYLINDER
R1%DC
UNBMAP: UNBMP0 ;UNIBUS ADAPTER MAP ADDRESS
UNBMP1
> ;END IFN SM10
; PUSH-DOWN POINTER
PDP: IOWD PDLEN,PDL
VBOOT::
;ENTER HERE FOR YOUR FAVORITE BOOTSTRAP FUNCTION
; TAKES IN
; 1 - BYTE POINTER TO COMMAND STRING
;
;CALL
; ;FIRST SETUP MAP FOR PAGES VORG-24 TO VORG + PROGRAM DATA
; ;ALSO SETUP DISK PARAMETERS IN DATA AREA
; JSP 16,VBOOT
; RETURNS
; +1 IF ERROR
; +2 IF NO ERROR AND NO START DESIRED
IFN FT.RP,<
SETZM F ;CLEAR FLAGS ONLY
> ; END OF IFN FT.RP
IFE FT.RP, <
SETZM INIVEC ;INITIALIZE ORIGINAL REGISTER CONTENTS
SETZB F,PIA ;CLEAR FLAGS AND RH20 PI ASSIGNMENT
MOVE P6,TAPTYP ;PICK UP THE TAPE TYPE
> ; END OF IFE FT.RP
MOVEM T1,ISTRNG ;T1 HAS STRING POINTER
CALL PARSE ;PARSE STRING, SETUP ARG BLOCKS
TLNN F,(F.ACT) ;ANY ACTION REQUESTED?
JRST EXIT ;NO - EXIT
IFE FT.MTA,<
CALL FNDIDX ;GET INDEX BLOCK OF DESIRED FILE
> ;END IFE FT.MTA
JUMPGE F,LODRUN ;DUMP DESIRED (B0 OF F)
CALL SAVE ;YES - DO DUMP
JRST 1(CX) ;SKIP RETURN IF OK
LODRUN: CALL GET ;HERE IF LOAD OR RUN FUNCTIONS
IFE SMFLG,<
SETZM DTEMTI ;ZERO INPUT READY FLAG
CALL SETLCV ;SETUP LOW CORE VARS
EXIT: SETZM ICCW ;TEMP
IFE FT.RP,<
CALL CHNRST ;RESTORE CHANNNEL
> ; END OF IFE FT.RP
> ; END OF IFE SMFLG
IFN SMFLG,<
CALL SETLCV ;SET UP TEMP LOCORE VAR
EXIT:
> ; END OF IFN SMFLG
TLNE F,(F.STRT) ;SHOULD PROGRAM BE STARTED?
JRST @START ;YES - GO TO IT
JRST 1(CX) ;NO - SKIP RETURN IF OK.
SETLCV: HRRZI T1,A%VORG ;GET ENDING PAGE ADDRESS
HRLI T1,A%VFST ;GET STARTING PAGE ADDRESS
MOVEM T1,BUTPGS ;SAVE ENDING PAGES IN COMMUNICATION AREA
HRRZI T1,A%PTB ;GET ADDRESS OF EPT PAGE
HRLI T1,A%EPT ;GET ADDRESS OF VBOOT EPT PAGE
MOVEM T1,BUTEPT ;SAVE EPT PAGE ADDRESS FOR MONITOR
MOVE T1,MAXCOR ;GET MAX CORE AVAILABLE
MOVEI T1,A%XB-A%VORG(T1) ;GET PHYSICAL ADDRESS OF FIRST PAGE
HRLI T1,-<<A%VORG-A%XB>_-9+1> ;GET # OF PAGES MONITOR MUST MAP
MOVEM T1,BUTPHY ;SAVE MAPPING INFO FOR MONITOR
MOVEI T1,A%XB ;GET FIRS VIRTUAL ADDRESS TO MAP
MOVEM T1,BUTVIR ;SAVE VIRTUAL ADDRESS FROM MONITOR
MOVE Q3,[POINT 7,BUTCMD] ;STORE FILESPCE
MOVEI Q1,"<" ;DIR
IDPB Q1,Q3 ;STORE CHAR
MOVE Q2,DIRSTR ;DIR STRING
CALL CPYSTR ;COPY STRING
MOVEI Q1,">" ;END OF DIR STRING
IDPB Q1,Q3 ;STORE CHAR
MOVE Q2,FILSTR ;FILENAME STRING
CALL CPYSTR ;COPY STRING
MOVEI Q1,"." ;FOR EXT
IDPB Q1,Q3 ;STORE
MOVE Q2,EXTSTR ;EXTENSION
CALL CPYSTR ;COPY STRING
SKIPN VERNUM ;VERSION SPECIFIED?
JRST APPNUL ;NO - EXIT
MOVEI Q1,"." ;YES- PUT VERSION OUT
IDPB Q1,Q3 ;STORE
MOVE Q2,VERSTR ; ...
CALL CPYSTR
JRST APPNUL
CPYSTR: ILDB Q1,Q2 ;GET A CHAR
JUMPE Q1,CPOPJ ;END OF STRING
IDPB Q1,Q3 ;OUTPUT A CHAR
JRST CPYSTR
;THE COMMAND STRING PARSER
PARSE: MOVE T1,[XWD DEFDAT,DEFBEG] ;SETUP BLT POINTER FOR DEFAULTS
BLT T1,DEFEND ;COPY DEFAULTS
MOVE Q2,ISTRNG ;GET POINTER TO INPUT STRING
MOVEI P5,ST.0 ;INITIAL STATE
P.NXT: CALL NXTSTA ;SETUP OUTPUTS THEN EVAL NXT STATE
JUMPE P5,P.TRM ;TERMINAL STATE REACHED
CAIN P5,777 ;ERROR STATE
JRST CMDERR ;YES - SIGNAL ERROR
IORI P5,STPORG ;NO - RELOCATE STATE TABLE
JRST P.NXT ;GO GET NEXT STATE
P.TRM: MOVE Q2,VERSTR ;TERMINATION - GET VERSION AS #
CALL DECIN ;CONVERT TO BINARY
MOVEM P3,VERNUM ;SAVE VERSION
TXNE F,F.DUMP ;DUMP WANTED?
TXZ F,F.ALL!F.NCHL ;YES, CLEAR THESE FLAGS
MOVE Q2,LBSTR ;GET POINTER TO LOWER BOUND
TXNE F,F.ALL ;WANT TO USE ALL OF CORE?
TDZA P3,P3 ;YES, GET A 0
CALL OCTIN ;NO, READ LOWER BOUND
MOVEM P3,LWRLIM ;SAVE LOWER BOUND
MOVE Q2,UBSTR ;GET POINTER TO UPPER BOUND
TXNE F,F.ALL ;WANT ALL OF CORE?
SKIPA P3,[VFREE] ;YES, GET HIGHEST PAGE BOOT CAN READ
CALL OCTIN ;NO, READ IT
MOVEM P3,UPRLIM ;SAVE UPPER BOUND
MOVE Q2,SWSTR ;GET SWITCH STRING
ILDB T1,Q2 ;GET NEXT CHARACTER
JUMPE T1,P.NOS ;NO SWITCHES - TEST START ADDR AND RETURN
SETZI T2, ;CLEAR SWITCH INDEX
MOVE T3,SWTAB ;GET POINTER TO SWITCHES
P.NXS: ILDB T4,T3 ;GET A LEGAL SWITCH
JUMPE T4,CMDERR ;END OF LIST - ERROR
CAME T1,T4 ;TEST IF THIS IS A MATCH
AOJA T2,P.NXS ;NO MATCH - LOOP
XCT SWXTAB(T2) ;EXECUTE APPROPRIATE INSTRUCTION
SKIPE D$UB ;UPPER BOUND SPECIFIED ?
JRST P.SW2 ;YES, USE SPECIFIED VALUE
MOVEI T1,.DMPUL ;GET DEFAULT UPPER BOUND FOR DUMP OPERATION
TXNE F,F.DUMP ;DUMP REQUESTED ?
MOVEM T1,UPRLIM ;YES, USE DEFAULT UPPER LIMIT FOR DUMP
P.SW2: TLNN F,(F.WRIT) ;WRITING?
JRST P.SA ;NO - CHECK STARTING ADDR
DMOVE T1,DEF.WT ;LOAD BOTH FILENAME DEFAULTS
CAMN T2,FILSTR ;NAME SPECIFIED?
MOVEM T1,FILSTR ;NO - CHANGE DEFAULT
P.SA: CALL OCTIN ;CONVERT STARTING ADDRESS
CALLRET SETSA ;SET STARTING ADDR AND RETURN
SWTAB: POINT 7,.+1 ;POINTER TO SWITCH LIST
ASCIZ 'MLRDSGA'
SWXTAB: TLO F,(F.ACT) ;MERGE
TLO F,(F.CLR!F.ACT) ;LOAD
TLO F,(F.CLR!F.STRT!F.ACT) ;RUN
TLO F,(F.WRIT!F.DUMP!F.ACT) ;DUMP
TLO F,(F.WRIT!F.ACT) ;SAVE
TLO F,(F.STRT) ;GO
TLO F,(F.ALL!F.ACT!F.NCHL) ;ALL
;THE STATE MACHINE
NXTSTA: MOVSI T4,(<POINT 18,0(P5)>) ;MAKE INPUT BYTE PTR
ILDB P4,T4 ;GET OUTPUT VALUE ADDRESS
ILDB Q3,T4 ;GET OUTPUT DATA ADDRESS
HRLI Q3,(<POINT 7,0>) ; MAKE OUTPUT BYTE PTR
MOVE T2,Q3 ;SAVE FOR LATER (CAREFUL WITH T2)
TLC T4,003300 ;SWITCH TO 9 BIT BYTES
NXT.CH: TLZN F,(F.BACK) ;TEST/CLEAR SCANNER BACKUP
ILDB Q1,Q2 ;GET NEXT CHAR
JUMPE Q1,CMDERR ;ERROR IF END OF STRING.
MOVE T3,T4 ;COPY POINTER TO TRANSITION TABLE
NXT.NT: ILDB T1,T3 ;GET NEXT TRANSITION BYTE
ANDI T1,177 ;GET DATA ONLY
JUMPE T1,NXT.EX ;SPECIAL BYTE - PROCESS IT
CAMN Q1,T1 ;TRANSITION CHARACTER?
JRST NXT.EX ;YES - PROCESS
ILDB T1,T3 ;SKIP NEXT STATE
JRST NXT.NT ;AND GET NEXT TRANSITION BYTE
NXT.EX: LDB T1,T3 ;GET FULL TRANSITION BYTE
JUMPE T1,NXT.ST ;END OF TABLE - STORE CHAR
ILDB P5,T3 ;GET NEXT STATE
CAIN P5,ST.6&777 ;ACCUMULATING UPPER AND LOWER BOUNDS?
TXO F,F.NCHL ;YES, DISABLE LIMIT CHANGING LATER
LSH T1,-7 ;GET FLAG BITS IN B34-35
XCT NXXTAB(T1) ;EXECUTE INSTRUCTION CORRESPONDING
TLZN F,(F.OUT) ;HAS STATE PRODUCED OUTPUT?
RET ;NO - EXIT
MOVEM T2,(P4) ;SAVE OUTPUT STRING
APPNUL: SETZ T2, ;APPEND NULL
IDPB T2,Q3 ;...
RET
NXT.ST: IDPB Q1,Q3 ;STORE OUTPUT CHAR
TLO F,(F.OUT) ;INDICATE STATE DID SOMETHING
JRST NXT.CH ;AND PROCESS NEXT CHARACTER
;STATE TABLE FLAG ACTION TABLE
NXXTAB: JFCL ;NO FLAGS
TLO F,(F.BACK) ;(200)SCANNER BACKUP
TLO F,(F.OUT) ;(400)FORCE OUTPUT
;(600)CURRENTLY UNUSED
;THIS BLOCK OF DEFAULT VALUES IS COPIED INTO THE DATA AREA
;STARTING AT DIRSTR ENDING AT DEFEND
DEF.WT: POINT 7,[ASCIZ 'DUMP'] ;DEFAULT FILSTR IF WRITING
DEFDAT:
DEF.FN: POINT 7,[ASCIZ 'MONITR'] ;DEFAULT FILSTR
POINT 7,[ASCIZ 'SYSTEM'] ;DEFAULT DIRSTR
POINT 7,[ASCIZ 'EXE'] ;DEFAULT EXTSTR
ZERO: Z ;DEFAULT VERSTR
Z ;DEFAULT SWSTR
POINT 7,[ASCIZ '340'] ;DEFAULT UBSTR
;DEFAULT LBSTR
;NOTE: A LDB ON A BYTE POINTER WITH 0 S FIELD PRODUCES A ZERO BYTE!
IFN <<.&777000>-<<.+STTSIZ>&777000>>,< ;CHECK TO SEE IF STATE PAGE TABLE CROSSES A PAGE
FILLER=<<<.&777000>+1000>-.>&777
BLOCK FILLER ;FORCE STATE TABLE TO PAGE BOUNDARY
>
;STATE TRANSITION TABLES:
; THESE TABLES PARSE A FILESPEC OF THE FORM
; <DIRECTORY>FILE.EXTENSION;VERSION/SWITCHSTARTADDR(LB,UB)
; FORMAT:
; XWD OUTPUT POINTER LOCATION,DATA AREA FOR CHARACTERS OUTPUT FROM THIS STATE
; A STRING OF 9 BIT BYTES CONSISTING OF A CHARACTER+FLAGS WHICH
; WILL CAUSE A STATE TRANSITION FOLLOWED BY THE LOW 9
; BITS OF THE TRANSITION TABLE FOR THE NEXT STATE.
;FLAGS: 200 = BACKUP SCANNER, 400=FORCE OUTPUT EVEN IF NULL
STPORG=.&777000 ;PAGE OFFSET TO STATE TABLES
;STATE 0 - INITIAL P5, MAKES TRANSITION TO NEXT STATE BASED ON FIRST CHARACTER.
ST.0: XWD 0,0 ;NO OUTPUT, NO DATA AREA
BYTE (9)"<",ST.1,".",ST.3,".",ST.4,"/",ST.5,15,0,200,ST.2
;STATE 1 - ACCUMULATE DIRECTORY STRING.
ST.1: XWD DIRSTR,D$DIR ;POINTER=DIRSTR, DATA=D$DIR
BYTE (9)">",ST.2,15,0,0
;STATE 2 - ACCUMULATE FILE NAME STRING
ST.2: XWD FILSTR,D$FIL ;POINTER=FILSTR,DATA=D$FIL
BYTE (9)".",ST.3,".",ST.4,"/",ST.5,15,0,0
;STATE 3 - ACCUMULATE EXTENSION STRING
ST.3: XWD EXTSTR,D$EXT ;POINTER=EXTSTR,DATA=D$EXT
BYTE (9)"."+400,ST.4,"/"+400,ST.5,15+400,0,0
;STATE 4 - ACCUMULATE VERSION STRING
ST.4: XWD VERSTR,D$VER
BYTE (9)"/",ST.5,15,0,0
;STATE 5 - ACCUMULATE SWITCH STRING
ST.5: XWD SWSTR,D$SW
BYTE (9)15,0,"(",ST.6,0
;STATE 6 - ACCUMULATE LOWER PAGE BOUND STRING
ST.6: XWD LBSTR,D$LB
BYTE (9)")",0,",",ST.7,15,0,0
;STATE 7 ACCUMULATE UPPER BOUND STRING
ST.7: XWD UBSTR,D$UB
BYTE (9)")",0,15,0
IFN <<.-ST.0>-STTSIZ>,<PRINTX ?STATE TABLE SIZE DOES NOT AGREE WITH STTSIZ>
IFN <STPORG-<.&777000>>,<PRINTX ?STATE TABLE MUST FIT ON SINGLE PAGE>
;NUMBER INPUT SUBROUTINES
DECIN: MOVEI T2,^D10 ;SET RADIX DECIMAL
JRST RADIN ;CONVERT
OCTIN: MOVEI T2,^D8 ;OCTAL RADIX
RADIN: SETZI P3, ;ZERO RESULT
RAD.NX: ILDB T1,Q2 ;GET NEXT CHARACTER
JUMPE T1,CPOPJ ;END OF STRING - RETURN OK
CAIG T1,57(T2) ;CHECK TO BE SURE
CAIGE T1,"0" ;THAT IT IS LEGAL
JRST CMDERR ;NOT LEGAL - LOSE
IMUL P3,T2 ;IS OK - CONVERT
ADDI P3,-60(T1) ;ADD TO RESULT
JRST RAD.NX
;STARTING ADDRESS SETUP/TEST SUBROUTINES
SETSA: HRRZM P3,START ;STORE START ADDR
TSTSA: SKIPN START ;NON ZERO?
TLZ F,(F.STRT) ;NO - CLEAR F.STRT
RET
IFE FT.MTA,<
MAPDIR: MOVEI P4,A%DIR ;GET ADDRESS FOR DIRECTORY HEADER
MOVE P5,A%XB ;GET DISK ADDRESS FOR FIRST PAGE OF DIR
JRST RDPGRT ;READ HEADER PAGE OF DIRECTORY
;MAP THE DIRECTORY INTO VIRTUAL ADDR DIR AND ABOVE
FNDIDX: MOVE P5,DIORG ;GET ADDRESS
MOVEI P4,A%XB ;INDEX BLOCK BUFFER
CALL REDPAG ;READ ROOT-DIR XB
JRST IOERR ;ERROR READING PAGE
CALL MAPDIR ;MAP IN ROOT DIR HEADER PAGE
MOVE T1,DIRSTR ;GET POINTER TO DIR STRING
MOVE T2,[POINT 7,[ASCIZ/DIRECTORY/]]
MOVEI T3,0 ;GET HIGHEST VERSION #
CALL GETIDX ;GET INDEX BLOCK OF DIR FILE
CALL MAPDIR ;MAP IN THE DIRECTORY
MOVE T1,FILSTR ;GET POINTER TO NAME STRING
MOVE T2,EXTSTR ;AND POINTER TO EXTENSION STRING
MOVE T3,VERNUM ;GET DESIRED VERSION #
;FALL INTO GETIDX
;..
> ;END IFE FT.MTA
IFE FT.MTA,<
;HERE TO GET THE INDEX BLOCK FOR THE FILE
GETIDX: MOVEM T1,FNDSTR ;SAVE NAME STRING
DMOVEM T2,FNDSTE ;SAVE EXTENSION STRING POINTER
; AND SAVE VERSION NUMBER
CALL FIND ;RETURN FDB OFFSET IN P1
GX.NE: MOVE Q2,FNDSTE ;COMPARE WITH NEXT EXTENSION
CALL GETPAG ;MAP IN PAGE CONTAINING FDB
LOAD Q3,FBEXT,(T1) ;GET ADR OF EXT STRING BLOCK
HRLI Q3,(POINT 7,0) ;SET IT UP AS A STRING POINTER
ADDI Q3,1 ;POINT TO STRING
CALL STRCMP ;COMPARE STRINGS
CAIA
JRST GX.NV ;FOUND EXTENSION MATCH - LOOK AT VERSION
CALL GETPAG ;MAP IN PAGE CONTAINING FDB
LOAD P1,FBEXL,(T1) ;STEP TO NEXT FDB IN THIS CHAIN
JUMPN P1,GX.NE ;BACK IF STILL MORE
JRST FNFERR ;NO MORE - LOSE
GX.NV: CALL GETPAG ;MAP IN PAGE CONTAINING FDB
LOAD T1,FBGEN,(T1) ;GET GENERATION NUMBER
SKIPE FNDSTV ;IS MOST RECENT VER WANTED?
CAMN T1,FNDSTV ;IS IT WHAT WE WANT?
JRST GX.DON ;YES - EXIT
GX.NV1: CALL GETPAG ;MAP IN PAGE CONTAINING THE FDB
LOAD P1,FBGNL,(T1) ;STEP TO FDB OF NEXT GENERATION
JUMPE P1,FNFERR ;NO MATCH - ERROR RETURN
JRST GX.NV ;TRY AGAIN
GX.DON: CALL GETPAG ;MAP IN PAGE CONTAINING FDB
LOAD T2,FBCTL,(T1) ;GET CONTROL BITS
TXNE T2,FB%DEL!FB%NXF ;DOES IT EXIST?
JRST GX.NV1 ;NO. GO GET ANOTHER THEN
SETOM XBNUM ;INITIALIZE XB NUMBER TO SHORT FILE
LOAD P5,FBADR,(T1) ;GET ADR OF INDEX BLOCK
TXNN T2,FB%LNG ;LONG FILE?
JRST GX.DN1 ;NO, JUST READ IN INDEX BLOCK 0
MOVEI P4,A%SXB ;LONG FILE, READ IN THE SUPER INDEX BLOCK
CALL REDPAG ; INTO A%SXB
JRST IOERR ;ERROR READING PAGE
LOAD P5,IDXADR,A%SXB+0 ;GET ADR OF FIRST INDEX BLOCK
JUMPE P5,FMTERR ;IF NO PAGE 0, FORMAT ERROR
SETZM XBNUM ;MARK THAT INDEX BLOCK 0 IS MAPPED
GX.DN1: MOVEI P4,A%XB ;READ INTO XB AREA
RDPGRT: CALL REDPAG ;READ THE PAGE
JRST IOERR ;ERROR READING PAGE
RET
; ROUTINE TO MAP A PAGE OF THE DIRECTORY
; ACCEPTS IN P1/ ADDRESS TO MAP
; CALL GETPAG
; RETURNS +1 WITH T1/ MAPPED ADDRESS
GETPAG: HRRZ T1,P1 ;GET ADDRESS DESIRED FROM FILE
LSH T1,-^D9 ;CONVERT ADDRESS TO PAGE NUMBER
MOVE P5,A%XB(T1) ;GET DISK ADDRESS OF FILE PAGE
MOVEI P4,A%DPG ;GET ADDRESS OF DIRECTORY DATA PAGE
CAMN P5,CURPAG ;DESIRED PAGE ALREADY IN CORE ?
JRST GETPG1 ;YES, DO NOT NEED TO READ AGAIN
CALL REDPAG ;NO, READ THE PAGE
JRST IOERR ;ERROR READING PAGE
GETPG1: LDB T1,[POINT 9,P1,35] ;GET LOW ORDER BITS OF ORIGINAL ADDRESS
IORI T1,A%DPG ;ADD ADDRESS OF DIRECTORY DATA PAGE
MOVEM P5,CURPAG ;UPDATE CURRENTLY IN-CORE PAGE
RET ;RETURN
> ;END IFE FT.MTA
IFE FT.MTA,<
;SUBROUTINE TO DO A PRIMARY NAME SEARCH IN A DIRECTORY
FIND: MOVE T1,SYMBOT ;START OF ST AREA
SUB T1,SYMTOP ;GET -LENGTH
MOVE P1,SYMBOT ;BUILD A
ADDI P1,2 ;RELOCATE
HRLI P1,2(T1) ;AOBJN POINTER
FND.NF: MOVE Q2,FNDSTR ;FILE NAME
CALL GETPAG ;MAP IN PAGE CONTAINING S.T. ENTRY
LOAD Q3,SYMET,(T1) ;GET SYMBOL TYPE
JUMPN Q3,FNFERR ;IF NOT NAME TYPE, BOMB OUT
LOAD Q3,SYMVL,(T1) ;GET FIRST FIVE CHARS OF NAME
CAME Q3,@FNDSTR ;IS THIS A MATCH AGAINST STRING?
JRST FND.NM ;NO, NO NEED TO COMPARE NAME STRING
LOAD Q3,SYMAD,(T1) ;GET FDB ADDRESS
PUSH P,P1 ;SAVE POINTER INTO SYMBOL TABLE
MOVE P1,Q3 ;GET ADDRESS OF FDB
CALL GETPAG ;MAP IN PAGE CONTAINING FDB
POP P,P1 ;RESTORE SYMBOL TABLE POINTER
LOAD Q3,FBNAM,(T1) ;GET ADDRESS OF NAME STRING BLOCK
HRLI Q3,(POINT 7,0) ;SET UP STRING POINTER
ADDI Q3,1 ;POINT TO STRING
CALL STRCMP ;COMPARE STRINGS
FND.NM: JRST [ ADD P1,[1,,1] ;NO MATCH, STEP OVER SYMBOL VALUE
AOBJN P1,FND.NF
JRST FNFERR] ;NO MORE NAMES, ERROR
CALL GETPAG ;MAP IN PAGE CONTAINING S.T. ENTRY
HRRZ P1,(T1) ;GET FIRST FILE FDB
RET
;STRING COMPARE SUBROUTINE
STRCMP: PUSH P,P1 ;SAVE P1
MOVE P1,Q3 ;COPY ADDRESS OF STRING IN FILE
CALL GETPAG ;MAP PAGE CONTAINING STRING BLOCK
POP P,P1 ;RESTORE P1
HRR Q3,T1 ;INSERT MAPPED ADDRESS TO STRING
STRCM1: ILDB T1,Q2 ;GET 1ST BYTE
ILDB T2,Q3 ;GET 2ND BYTE
CAME T1,T2 ;EQUAL?
RET ;NO - LOSE
JUMPN T1,STRCM1 ;YES -END OF STRING?
> ;END IFE FT.MTA
RETSKP ;SKIP RETURN
;IO SUBROUTINES
IFN FT.RP, <
REDPAG: TDZA P3,P3 ;READ
WRTPAG: MOVEI P3,1 ;WRITE
> ; END OF IFN FT.RP
IFE SMFLG, <
IFE FT.RP, <
REDPAG: SKIPA T1,[.RHSTR!LR!RCLP!STLW!<-4&1777>B29!R4%CRD!GO] ;RH20 READ DATAO
WRTPAG: MOVE T1,[.RHSTR!LR!<-4&1777>B29!RCLP!STLW!R4%CWR!GO] ;RH20 WRITE DATAO
> ; END OF IFE FT.RP
AOS FILPAG ;INCREMENT FILE PAGE #
PUSH P,P2 ;SAVE COUNTER
MOVEI P2,5 ;RETRY COUNT
IFN FT.MTA, <
MOVEI P2,^D100 ;RETRY COUNT FOR MAGTAPE
JRST MRETRY ;YES, GO DO TAPIO
> ; END OF IFN FT.MTA
IFE FT.MTA, <
DRETRY: CALL IOSET ;SETUP CHANNEL, DO SEEK
SOJG P2,DRETRY ;TRY SEEK ET AL AGAIN
JUMPE P2,IOERR ;SIGNAL ERROR
CALL DOIO ;START IO AND WAIT
IFE FT.RP,<CALL CHNRST> ;IF RH'S, RESTOE CHANNEL
EXCH T1,T4 ;GET BACK ORIGINAL COMMAND
JUMPG T4,RWSXIT ;IF NO ERRORS, EXIT SUCCESSFULLY
SOJG P2,DRETRY ;GO RETRY TIL COUNT EXHAUSTED
JRST RWFXIT ;OPERATION FAILED
> ; END OF IFE FT.MTA
IFN FT.MTA,<
MRETRY: CALL TAPIO ;DO IO
JRST RWSXIT ;WIN
SOJLE P2,TAPERR ;SHOULD RETRY?
CALL BSPACE ;YES - BACKSPACE
JRST MRETRY ;LOOP
> ;END IFN FT.MTA
RWSXIT: AOS -1(P) ;SKIP RETURN
RWFXIT: POP P,P2 ;RESTORE P2
RET ;RETURN
IFE FT.MTA, <
;DISK IO SUBROUTINES - DISK DEPENDENT PARTS.
DOIO: SAVPI T2 ;SAVE PI ASSIGNMENT
IOOP(CLEAR) ;CLEAR CONTROLLER/UNIT
MOVSI T1,2 ;DELAY COUNT
IOOP(XCTOP,T4) ;EXECUTE OPERATION
WAIT: IOOP(SKIPDONE) ;SKIP IF DONE
SOJG T1,WAIT ;LOOP
RESPI T2 ;RESTORE PI ASSIGNMENT
JUMPLE T1,CPOPJ ;RETURN IF TIMEOUT
IOOP(SKIPNOERR) ;SKIP IF NO ERRORS
SETOI T1, ;YES - SET T1 MINUS AS FLAG
RET ;RETURN
> ; END OF IFE FT.MTA
;THIS RANDOM INSTRUCTION FROM PARSE IS HERE TO SAVE SPACE
P.NOS: TLO F,(F.STRT!F.CLR!F.ACT) ;DEFAULT WHEN NO SWITCHES
RET ;RETURN
IFE FT.RP,< ;IF DOING RH TYPE DISKS
CHNRST: PUSH P,T1 ;SAVE 1
MOVX T1,.RHIVR!LR ;INTERRUPT VECTOR REGISTER
HRR T1,INIVEC ;GET INITIAL CONTENTS
CALL IOXCT ;GO WRIET DEVICE REGISTER
DATAO .-.,1
MOVE T1,PIA ;GET RH20 PI ASSIGNMENT
CALL IOXCT ;GET DEVICE CODE
CONO .-.,.RHDON!.RHAIE(T1) ;RESTORE ORIGINAL PI ASSIGNMENT
POP P,T1 ;RESTORE 1
RET> ;AND DONE
IFE FT.MTA, <
IFE FT.RP, <
IOSET: PUSH P,T1 ;SAVE RP04 COMMAND
MOVE T1,P5 ;GET DISK ADDRESS
TLZ T1,777774 ;KEEP JUST THE ADDRESS BITS
MOVE T2,DSKTYP ;FIND TYP
CAIN T1,.R7TY1
JRST [ IDIVI T1,N.SCL7 ;RP07?
JRST IOSETC]
CAIN T2,.R3TYP ;RM03?
JRST [ IDIVI T1,N.SCL3
JRST IOSETC]
IDIVI T1,N.SCL4 ;GET CYLINDER IN T1, SECTOR IN T2
IOSETC: PUSH P,T2 ;SAVE SECTOR WITHIN CYLINDER
IFN FT.RP,<
IDIVI T1,N.CLUN ;GET UNIT # IN T1, CYL ON UNIT IN T2
> ;END IFN FT.RP
IFE FT.RP,<
IDIV T1,NUMCYL ;GET UNIT NUMBER IN T1, CYL IN T2
> ;END IFE FT.RP
HRRZ P3,DSKTAB(T1) ;GET PHYSICAL UNIT NUMBER
HLRZ T1,DSKTAB(T1) ;GET CHANNEL #, ENTRY-IN-USE FLAG
TRZ T1,ENTFLG ;KEEP JUST THE CHANNEL NUMBER
HRRI F,RH0_-2(T1) ;GET IO DEVICE CODE
LSH T1,2 ;GET CHANNEL * 4
MOVE T3,[1B1+ICCW] ;GET JUMP CCW
MOVEM T3,A%EPT+ICA(T1) ;STORE JUMP CCW IN EPT FOR RH20
CALL IOXCT ;GO GET RH20 DEVICE CODE
CONI .-.,T1 ;GET RH20 PI ASSIGNMENT
ANDI T1,.RHMBE+7 ;KEEP JUST MB ENABLE AND PI
MOVEM T1,PIA ;SAVE RH20 PI ASSIGNMENT
MOVX T1,.RHIVR ;INTERRUPT VECTOR REGISTER
CALL RHRD ;GET ORIGINAL CONTENTS OF IVR
ANDI T1,177777 ;KEEP JUST DATA BITS
MOVEM T1,INIVEC ;NO, SAVE INITIAL IVR CONTENTS
IOOP(CLEAR) ;RESET RH20
MOVX T1,R4%DCA!LR ;DESIRED CYLINDER REGISTER IN RP04
HRR T1,T2 ;GET DESIRED CYLINDER #
CALL RHWT ;TELL RP04 WHICH CYLINDER
POP P,T1 ;RESTORE SECTOR WITHIN CYLINDER
IDIVI T1,N.STK4 ;GET TRACK # IN T1, SECTOR IN T2
LSH T1,^D8 ;POSITION THE TRACK # FOR DATAO
IOR T1,T2 ;ADD A PINCH OF SECTOR
PUSH P,T1 ;SAVE DISK ADDRESS
TXO T1,R4%DST!LR ;RP04 DESIRED SECTOR AND TRACK REGISTER
CALL RHWT ;GO WRITE SECTOR, TRACK REGISTER
POP P,T1 ;RESTORE DISK ADDRESS
IFE FT.RP, <
TXO T1,.RHSBR!LR ;RH20 BLOCK ADDRESS REGISTER
CALL RHWT ;TELL RP04 WHERE THE DATA IS
> ; END OF IFE FT.RP
POP P,T4 ;RESTORE ORIGINAL INSTRUCTION
IOSET0: TSO T4,P3 ;INSERT UNIT # INTO COMMAND
CALL GETPHY ;GET PHYSICAL ADDR IN T1
JRST MEMERR ;BAD ADDRESS SIGNAL ERROR
IFN KLFLG, <
JUMPN T1,IOSET1 ;PAGE 0?
MOVSI T1,(EXP 1B0+<LCORAD>B13) ;YES - SKIP FIRST FEW WDS
MOVEM T1,ICCW ;STORE AS FIRST ELEMENT
MOVE T1,[EXP 1B0+1B1+<1000-LCORAD>B13+LCORAD]
MOVEM T1,ICCW+1 ;SECOND AND LAST CCW
JRST CPOPJ1 ;GO DO IO
IOSET1: TLO T1,(EXP 1B0+1B1+<1000>B13) ;BUILD CCW
MOVEM T1,ICCW ;STORE
JRST CPOPJ1 ;RETURN
> ; END OF IFN KLFLG
IFE KLFLG, <
MOVEI T3,-1000 ;COUNT
JUMPN T1,IOS.CM ;READ/WRITE PAGE 0?
MOVE T3,[IOWD LCORAD,LCORAD] ;YES - MUST SKIP FIRST FEW WDS
MOVEM T3,2(T2) ;STORE SKIP COMMAND
MOVEI T1,LCORAD ;NEW ADDRESS
MOVEI T3,-<1000-LCORAD> ;NEW COUNT
ADDI T2,1 ;BUMP CCW ADDR
IOS.CM: SOS T1 ;IOWD WANTS ADDR -1
HRL T1,T3 ;INSERT COUNT
MOVEM T1,2(T2) ;STORE COMMAND LIST
SETZM 3(T2) ;0 AT END OF LIST
JRST CPOPJ1 ;SKIP RETURN
> ; END OF IFE KLFLG
> ; END OF IFE FT.RP
IFN FT.RP,<
IOSET: HRRI F,DPC_-2 ;DISK CONTROLLER CODE
MOVE T1,P5 ;GET DISK ADDR
TLZ T1,777774 ;CLEAR UNUSED BITS
IDIVI T1,N.SCL4 ;GET CYL, BLOCK IN CYL
PUSH P,T2 ;SAVE BLOCK WITHIN CYL
IDIVI T1,N.CLUN ;GET UNIT, CYL
LSH T2,^D10 ;MOVE CYL FIELD
TLZE T2,1 ;MOVE CYL 256 BIT
TRO T2,20 ;IF NEEDED (AND RP03
HLL T2,DSKTAB(T1) ;GET UNIT # & ENTRY-IN-USE FLAG
TLZ T2,ENTFLG ;KEEP JUST UNIT #
POP P,T1 ;RECOVER BLOCK WITHIN CYL
PUSH P,T2 ;SAVE PARTIAL ADDR
IDIVI T1,^D10 ;GET TRACK, SECTOR
LSH T1,5 ;POSITION TRACK
IOR T1,T2 ;OR IN SECTOR
POP P,T2 ;RECOVER UNIT
IOR T1,T2 ;FINISH ADDRESS
LSH T1,^D12 ;MOVE TO WHERE HDWE WANTS IT
IORI T1,ICCW ;CHANNEL ICCW ADDRESS
TLO T1,400000 ;OP=4 (SEEK)
MOVE T4,T1 ;COPY COMMAND
CALL DOIO ;EXECUTE SEEK
JUMPLE T1,CPOPJ ;FAIL IF ERRORS
DPB P3,[POINT 3,T4,2] ;SET OP CODE
MOVEI T2,ICCW ;GET INITIAL CHAN COMMAND ADDR
SETZM 1(T2) ;CLEAR TERMINATION WORD
MOVEI T1,2(T2) ;ADDR OF ACTUAL CHAN COMMAND LIST
MOVEM T1,ICCW ;STORE ADDR OF CCW LIST
CALL GETPHY ;GET PHYSICAL ADDR IN T1
JRST MEMERR ;BAD ADDRESS SIGNAL ERROR
MOVEI T3,-1000 ;COUNT
JUMPN T1,IOS.CM ;READ/WRITE PAGE 0?
MOVE T3,[IOWD LCORAD,LCORAD] ;YES - MUST SKIP FIRST FEW WDS
MOVEM T3,2(T2) ;STORE SKIP COMMAND
MOVEI T1,LCORAD ;NEW ADDRESS
MOVEI T3,-<1000-LCORAD> ;NEW COUNT
ADDI T2,1 ;BUMP CCW ADDR
IOS.CM: SOS T1 ;IOWD WANTS ADDR -1
HRL T1,T3 ;INSERT COUNT
MOVEM T1,2(T2) ;STORE COMMAND LIST
SETZM 3(T2) ;0 AT END OF LIST
JRST CPOPJ1 ;SKIP RETURN
> ;END IFN FT.RP
> ; END OF IFE FT.MTA
IFN FT.MTA,<
;HERE TO SETUP THE CHANNEL FOR TAPE IO
TAPIO: LDB T4,PCHAN ;GET CHANNEL NUMBER
HRRI F,RH0_-2(T4) ;SET IO ADDRESS
LDB P3,PKON ;GET TM02
CALL IOXCT ;GET DEVICE CODE
CONI .-.,T1 ;GET RH20 PI ASSIGNMENT
ANDI T1,.RHMBE+7 ;KEEP JUST PI
SKIPN PIA ;SAVED PI ASSIGNMENT YET ?
MOVEM T1,PIA ;NO, SAVE IT NOW
MOVX T1,.RHIVR ;INTERRUPT VECTOR REGISTER
CALL RHRD ;GET ORIGINAL CONTENTS OF IVR
ANDI T1,177777 ;KEEP JUST DATA BITS
SKIPN INIVEC ;SAVED ORIGINAL CONTENTS YET ?
MOVEM T1,INIVEC ;NO, SAVE INITIAL IVR CONTENTS
CALL IOXCT ;GET DEVICE CODE
CONO .-.,.RHMBE!.RHRAE!.RHCTE!.RHDON ; RESET RH20
JUMPN P6,DX2SIO ;TEST FOR DX20
MOVEI T1,TMCD16 ; SET DENSITY
LDB T2,PUNIT ;GET DRIVE NUMBER
IOR T1,T2 ; ...
HRLI T1,(.TMTCR!LR) ;TAPE CONTROL REG
CALL RHWT ; ...
IFN FT.DX2,<
JRST TAPIO0 ;BACK TO COMMON CODE
DX2SIO: LDB T1,PUNIT ;PICK UP UNIT NUMBER
TRO T1,.TDMOD ;SET THE MODES
TXO T1,.TDDNR!LR ;GOES INTO DRIVE NUMBER REG
CALL RHWT ;LOAD THE REG
MOVX T1,<<-1000*5>&177777> ;SET CORRECT RECORD SIZE
TXO T1,.TMFCR!LR ;GOES INTO BYTE COUNT REG
CALL RHWT ;SET RECORD SIZE
MOVX T1,.TMDSR ;GET THE DEVICE STATUS REG
CALL RHRD ;
TXNN T1,.TDMPR ;MAKE SURE IT IS STILL RUNNING
CALL STDX20 ;IF NOT, START IT
TAPIO0:
>;END IFN FT.DX2
MOVE T1,[EXP .TMATR!LR+377] ;CLEAR ATTN
CALL RHWT ;
MOVE T1,[EXP 1B1+ICCW] ;CHANNEL JUMP TO ICCW
LSH T4,2 ;COMPUTE OFFSET INTO EPT
MOVEM T1,A%EPT+ICA(T4) ;STORE
CALL GETPHY ;GET PHYS ADDR
JRST MEMERR ;ERROR - DEPART
JUMPN T1,TAPIO1 ;PAGE 0?
MOVSI T1,(EXP 1B0+<LCORAD>B13) ;YES - SKIP FIRST FEW WDS
MOVEM T1,ICCW ;STORE AS FIRST ELEMENT
MOVE T1,[EXP 1B0+1B1+<1000-LCORAD>B13+LCORAD]
MOVEM T1,ICCW+1 ;SECOND AND LAST CCW
JRST TAPIO2 ;GO DO IO
TAPIO1: TLO T1,(EXP 1B0+1B1+<1000>B13) ;BUILD CCW
MOVEM T1,ICCW ;STORE
TAPIO2: MOVE T1,[EXP .RHSTR!LR!RCLP+.TMRDF+1777B29] ;SEND COMMAND
CALL RHWT ; ...
MOVSI T2,1 ;SET WAIT COUNT
TAPWAT: CALL IOXCT ;GET DEVICE CODE
CONI .-.,T1 ;GET DEVICE STATUS
TRNN T1,.RHDON ;DONE ?
SOJG T2,TAPWAT ;NO - LOOP
TRNN T1,775000 ;ERRORS+
JUMPG T2,CPOPJ ; NO - EXIT
JRST CPOPJ1 ;YES - SKIP
BSPACE: CALL IOXCT ;GET IO CODE
CONO .-.,2000 ;RESET THE RH20 BEFORE
CALL IOXCT ; DOING BACKSPACE
CONO .-.,4600 ;...
IFN FT.DX2,<
SKIPN P6 ;DX20?
CALL STDX20 ;YES, RESTART IT
>;END IFN FT.DX2
MOVE T1,[EXP .TMFCR!LR+177777] ;REPEAT COUNT
CALL RHWT ;
MOVE T1,[EXP .TMCSR!LR+.TMBSF] ;DO BACKSPACE
CALL RHWT ;
MOVSI T2,5 ;TIMED WAIT
IFN FT.DX2,<
JUMPN P6,BXWAIT ;IF DX, DO DX WAIT
>;END IFN FT.DX2
BWAIT: MOVSI T1,(.TMDSR) ;WAIT FOR NO POSN
CALL RHRD ;
TRNE T1,TMSPIP ;DONE YET?
SOJG T2,BWAIT ;NO
IFN FT.DX2,<
JRST BWAITX ;TO COMMON CLEANUP
BXWAIT: MOVX T1,.TMDSR ;READ THE STATUS REG
CALL RHRD ;
TRNN T1,.TDATB ;ATTENTION UP?
SOJG T2,BXWAIT ;NO, LOOP
BWAITX:
>;END IFN FT.DX2
MOVE T1,[EXP .TMATR!LR+377] ;CLEAR ATTN
CALL RHWT ;
JUMPLE T2,TAPERR ;TIMEOUT - LOSE
RET ;
PCHAN: POINT 6,DSKTAB,23 ;POINTER TO CHAN NUMBER
PKON: POINT 6,DSKTAB,29 ;POINTER TO KON NUMBER
PUNIT: POINT 6,DSKTAB,35 ;POINT TO TAPE UNIT
> ;END IFN FT.MTA
IFE FT.RP, <
RHRD: TLZ T1,(LR) ;NO WRITE
RHWT: TSO T1,P3 ;INSERT TM02
CALL IOXCT
DATAO .-.,T1 ;SEND COMMAND
CALL IOXCT
DATAI .-.,T1 ;READ RESULT
RET
> ; END OF IFE FT.RP
> ; END OF IFE SMFLG
IFN SMFLG,<
P.NOS: TLO F,(F.STRT!F.CLR!F.ACT)
RET
REDPAG: SKIPA T1,[R4%CRD!GO] ;RH11 READ
WRTPAG: MOVEI T1,R4%CWR!GO ;RH11 WRITE
AOS FILPAG ;INCREMENT FILE PAGE #
PUSH P,TIMLOC ;SAVE A LOW CORE LOCATION
PUSH P,RELWD ;SAVE RELOAD REASON ALSO
PUSH P,P1 ;SAVE A REGISTER
PUSH P,P2 ;SAVE COUNTER
IFN FT.MTA,<
MOVEI P2,^D100 ;RETRY 100
MOVE T4,T1 ;GET COMMAND CODE
MRETRY: CALL TAPIO ;DO TAPE I/O
JRST RWSXIT ;WIN
SOJLE P2,TAPERR ;NO RETRY
CALL BSPACE ;YES -- BACKSPACE
JRST MRETRY ;RETRY
> ;END IFN FT.MTA
IFE FT.MTA,<
MOVEI P2,5 ;RETRY COUNTER
DRETRY: PUSH P,T1 ;SAVE RP04 COMMAND
MOVE T1,P5 ;GET DISK ADDRESS
TLZ T1,777774 ;KEEP JUST THE ADDRESS BITS
MOVE T2,DSKTYP ;FIND TYPE
CAIN T2,.R3TYP ;RM03?
JRST [ IDIVI T1,N.SCL3 ;DO RM03 CONVERSION
JRST DRETR3]
IDIVI T1,N.SCL4 ;GET CYL IN T1, SECTOR IN T2
DRETR3: PUSH P,T2 ;SAVE CYL
IDIV T1,NUMCYL ;GET UNIT AND CYL
HLRZ P1,DSKTAB(T1) ;FIND UNIT ADDRESS
TRZ P1,ENTFLG
HRRZ P3,DSKTAB(T1) ;GET PHYSICAL UNIT NUMBER
MOVEI T1,RH1CLR ;CLEAR RH11
WRIO T1,@RPCS2(P1)
WRIO P3,@RPCS2(P1) ;SET UNIT NUMBR
HRRZ T1,T2 ;SET DESIREC CYL
WRIO T1,@RPDC(P1) ;SET DESIRED CYL
POP P,T1 ;RESTORE SECTOR WITHIN CYL
MOVE T2,DSKTYP ;GET TYPE
CAIN T2,.R3TYP ;RM03?
JRST [ IDIVI T1,N.STK3
JRST DRETR4]
IDIVI T1,N.STK4 ;GET TRACK # IN T1, SECTOR IN T2
DRETR4: LSH T1,^D8 ;POSITION IN THE TRACK #
IOR T1,T2 ;ADD THE ECTION
WRIO T1,@RPDA(P1) ;SET DESIRED ADDRESS REG
POP P,T4 ;RESTORE ORIG INSTRUCTION
CALL GETPHY ;GET PHYSICAL ADDR IN 1
JRST MEMERR ;BAD ADDRESS SIGNAL ERROR
;
; ON THE SM10 LCORAD IS NOT USED SINCE IT IS LEGAL TO TRANSFER
; INTO LOW CORE (SHADOW AC'S) AND IT IS NECESSARY SINCE RH11
; WILL NOT PERMIT THE TRANSFER IN THE MIDDLE OF A BLOCK
;
IOSET1: LSH T1,-^D9 ;SET CORE ADDRESS
IORI T1,UNVBIT!UN36B ;SET UNIBUS VALID BIT
WRIO T1,@UNBMAP(P1) ;SET UNIBUS MAP
SETZ T1,0 ;SET THE UNIBUS ADDRESS TO 0
WRIO T1,@RPBA(P1)
MOVNI T1,RPPGSZ ;SET PAGE SIZE
WRIO T1,@RPWC(P1) ;SET SIZE OF TRANSFER
TRYIT: CALL DOIO ;DO I/O
EXCH T1,T4 ;GET BACK ORIG COMMAND
JUMPG T4,RWSXIT ;IF NO ERROSR , EXIT SUCCESS
SOJG P2,DRETRY ;GO RETRY TIL COUNT EXHAUSTED
JRST RWFXIT ;OP FAILED
> ; END IFE FT.MTA
RWSXIT: AOS -4(P) ;SKIP RETURN
RWFXIT: POP P,P2 ;RESTORE P2
MOVEI T1,RH1IE
WRIO T1,@RPCS1(P1)
POP P,P1 ;RESTORE P1
POP P,RELWD ;RESTORE RELOAD REASON
POP P,TIMLOC ;RESTORE LOW CORE
RET ;RETURN
DOIO: MOVSI T1,2 ;SAVE DELAY COUNT
WRIO T4,@RPCS1(P1) ;DO COMMAND
MOVEI T2,RH1RDY ;WAIT FOR READY
WAIT: TION T2,@RPCS1(P1)
SOJG T1,WAIT ;WAIT FOR DONE
JUMPLE T1,CPOPJ ;RETURN
MOVEI T2,RH1TRE ;CHECK FOR ERROR
TIOE T2,@RPCS1(P1) ;CHECK STATUS
SETOI T1, ;YES SET T1 MINUS AS FLAG
RET ;RETURN
IFN FT.MTA,<
TAPIO: LDB P1,PCHAN ;GET THE CHANNEL
LDB P3,PKON ;GET THE TM02 UNIT NUMBER
WRIO P3,@RPCS2(P1) ;SET CHANNEL
LDB T1,PUNIT ;GET SLAVE UNIT
IORI T1,TMCD16 ;SET 1600BPI
WRIO T1,@RPDC(P1) ;SET IT
CALL GETPHY ;GET PHYSICAL ADDRESS
JRST MEMERR ;MEMORY ERROR
IOSET1: LSH T1,-^D9 ;SET CORE ADDRESS
IORI T1,UNVBIT ;SET UNIBUS VALID BIT
WRIO T1,@UNBMAP(P1) ;SET UNIBUS MAP
SETZ T1,0 ;SET THE UNIBUS ADDRESS TO 0
WRIO T1,@RPBA(P1) ;SET BUS ADDRESS
WRIO T1,@RPDA(P1) ;SET FRAME COUNTER TO 0
MOVNI T1,RPPGSZ ;SET PAGE SIZE
WRIO T1,@RPWC(P1) ;SET WORD COUNT REGISTER
CALL DOIO ;DO I/O
JUMPGE T1,CPOPJ ;OK RETURN
RDIO T1,@RPER1(P1) ;READ ERROR REGISTER
TRNN T1,75377
JRST CPOPJ1
JRST CPOPJ
BSPACE: MOVEI T1,40000 ;RESET RH11
WRIO T1,@RPCS1(P1)
MOVEI T1,-1 ;BACKSPACE 1
WRIO T1,@RPDA(P1) ;FRAME COUNT -1 (1 RECORD
PUSH P,T4 ;SAVE PREVIOUS COMMAND
MOVEI T4,.TMBSF ;BACKSPACE
CALL DOIO ;DO BACKSPACE
SKIPA ;WAIT
JRST TAPERR ;FATAL ERROR
POP P,T4 ;RESTORE COMMAND
MOVEI T1,TMSPIP ;CHECK FOR PIP
TIOE T1,@RPDS(P1)
JRST .-1
RET
PCHAN: POINT 6,DSKTAB,23 ;POINTER TO CHANNEL NUMBER
PKON: POINT 6,DSKTAB,29 ;POINTER TO TM02 NUMBER
PUNIT: POINT 6,DSKTAB,35 ;POINT TO TAPE UNIT
> ;END IFN FT.MTA
> ;END IFN SMFLG
;SUBROUTINE TO GET THE PHYSICAL ADDRESS CORRESPONDING
;TO THE ADDRESS IN P4 (EITHER PHYS OR VIRT DEPENDING ON F.PHYS)
;RETURN THE RESULT IN T1
;RETURNS NON-SKIP IF THE ADDR PAGE FAULTS OR NXMS
; PAGE TABLE SLOT USED FOR THIS TEST IS FOR THE PAGE PRECEDING THE
; FIRST DIRECTORY PAGE, A%DIR:
TSTSLT== <A%DIR_-9>-1+A%PTB ;PAGE TABLE SLOT FOR TESTING
GETPHY: MOVE T1,P4 ;COPY ADDRESS
LSH T1,-9 ;CONVERT ADDRESS TO PAGE NUMBER
TXNE F,F.PHYS ;PHYSICAL ADDRESS FOR ARGUMENT ?
JRST GPY.P0 ;YES, GO TEST FOR EXTANT PAGE
; ARGUMENT IS A VIRTUAL ADDRESS - CONVERT TO PHYSICAL AND TEST
MAP T1,(P4) ;GET PHYSICAL PAGE NUMBER
TLNN T1,(1B2) ;IS PAGE ACCESSIBLE ?
RET ;NO, RETURN
TLZ T1,777760 ;YES, CLEAR ALL BITS BUT ADDRESS
LSH T1,-^D9 ;CONVERT ADDRESS TO A PAGE #
; HERE WITH A PHYSICAL ADDRESS TO TEST
GPY.P0: TXO T1,IMMPTR ;FORM IMMEDIATE POINTER
PUSH P,TSTSLT ;SAVE PAGE TABLE ENTRY
MOVEM T1,TSTSLT ;MAP PAGE TO BE TESTED
CLRPT <<A%DIR_-9>-1>_9 ;CLEAR PAGING MEMORY
CONO APR,AP.RNX ;TURN OFF NXM FLAG
SKIP <<A%DIR_-9>-1>_9 ;REFERENCE VIRTUAL PAGE
HRRZ T1,TSTSLT ;GET PHYSICAL PAGE #
LSH T1,9 ;CONVERT TO PHYSICAL ADDRESS
POP P,TSTSLT ;RESTORE ORIGINAL MAP ENTRY
CONSO APR,AP.NXM ;NXM ON REFERENCE ?
JRST CPOPJ1 ;NO, GIVE GOOD RETURN
CONO APR,AP.RNX ;YES, RESET NXM FLAG
RET ;RETURN BAD
;SUBROUTINE TO TEST IF A GIVEN ADDRESS IS LEGAL
;VIZ DOES THE ADDR PAGE FAIL, NXM , OR POINT TO A VBOOT PAGE?
;IF SO, RETURN NON SKIP
TSTADR: MOVE T1,P4 ;GET ADDR TO TEST
LSH T1,-9 ;CONVERT TO PAGE
CAMG T1,UPRLIM ;BELOW UPPER LIMIT?
CAMGE T1,LWRLIM ;ABOVE LOWER LIMIT?
RET ;NO - BAD
CALL GETPHY ;CONVERT TO PHYSICAL ADDR
RET ;BAD RETURN FROM GETPHY
PUSH P,P4 ;SAVE DEST
PUSH P,F ;SAVE FLAGS
TLZ F,(F.PHYS) ;TEST VIRT ADDR
MOVE T2,T1 ;PHYS ADDR
MOVEI P4,A%VFST ;START OF VBOOT AREA
TA.NXT: CALL GETPHY ;CONVERT TO PHYS ADDR
JRST MEMERR ;IMPOSSIBLE CONDITION
CAMN T1,T2 ;SAME AS TARGET ADDR?
JRST TA.BAD ;YES - FAIL RETURN
ADDI P4,1000 ;NO - TRY NEXT PAGE
CAIG P4,VORG_9 ;CHECKED ALL PAGES?
JRST TA.NXT ;NO - LOOP FOR MORE
AOS -2(P) ;SKIP RETURN (THIS IS PRETTY BAD...)
TA.BAD: POP P,F ;RESTORE FLAGS
POP P,P4 ;RESTORE ADDRESS
RET ;NON-SKIP RETURN
;ERROR MESSAGE RETURNS
CMDERR: DMOVE T1,[SIXBIT /COMMAND ERR/]
JRST 0(CX)
FNFERR: DMOVE T1,[SIXBIT /FIL NOT FND/]
JRST 0(CX)
BIGERR: DMOVE T1,[SIXBIT/BAD EXE DIR/]
JRST 0(CX)
IOERR: DMOVE T1,[SIXBIT /IO ERROR/]
JRST 0(CX)
MEMERR: DMOVE T1,[SIXBIT /BAD MEM ADDR/]
JRST 0(CX)
FMTERR: DMOVE T1,[SIXBIT /BAD FIL FMT/]
JRST 0(CX)
;SUBROUTINE TO CLEAR CORE
CLRCOR: SETOI P4, ;INITIALIZE ADDRESS
IFN SMFLG,<
PUSH P,RELWD ;SAVE RELOAD WORD
>
CLR.NP: ADDI P4,1000 ;NEXT PAGE
TLNE P4,-1 ;DONE 256K?
IFE SMFLG,<
RET
>
IFN SMFLG,<
JRST [ POP P,RELWD
RET]
>
CALL TSTADR ;NO - TEST IF ADDRESS LEGAL
JRST CLR.NP ;NOT LEGAL - TRY NEXT PAGE
MOVE T1,P4 ;COPY ADDRESS
TRZ T1,777 ;CLEAR LOW ORDER BITS
SKIPN T1 ;PAGE ZERO?
MOVEI T1,LCORAD ;YES - START AT LOC LCORAD
CLR.NW: SETZM (T1) ;CLEAR A WORD OF THE PAGE
CAIGE T1,(P4) ;DONE?
AOJA T1,CLR.NW ;NO - LOOP FOR MORE OF THIS PAGE
JRST CLR.NP ;YES - LOOP FOR MORE
IFE FT.EXE, <
;ROUTINE TO GET A FILE FROM DISK TO MEMORY
;THE VIRTUAL ADDRESSES NEEDED BY THE FILE ARE ASSUMED
;TO HAVE BEEN MAPPED BY THE CALLER
GET: MOVEI P4,A%FP0 ;READ FILE PAGE ZERO
MOVE P5,A%XB ; DISK ADDR FROM XB
CALL REDPAG ;READ THE PAGE
JRST IOERR ;ERROR READING PAGE
HLRZ T1,A%FP0 ;CHECK FORMAT CODE
CAIE T1,1000 ;CODE OK?
JRST FMTERR ;NO. ERROR RETURN
TLNE F,(F.CLR) ;CLEAR CORE?
CALL CLRCOR ;YES - CALL SUBR
MOVN P1,A%FP0 ;OK - GET COUNT OF PAGES
HRLZS P1 ;BUILD POINTER WORD
HRRI P1,A%FP0+1 ;FIRST DATA WORD
GET.NP: MOVE T1,(P1) ;GET PAGE DESCRIPTOR
MOVE P5,A%XB(T1) ;GET DISK ADDRESS OF PAGE
LDB P4,[POINT 9,T1,17] ;GET MEMORY PAGE ADDR
LSH P4,9 ;CONVERT PAGE NO. TO ADDRESS
CALL TSTADR ;CHECK IF ADDRESS IS LEGAL
JRST GT.NP1 ;NO - SKIP READ
CALL REDPAG ;READ THE PAGE
JRST IOERR ;ERROR READING PAGE
GT.NP1: AOBJN P1,GET.NP ;BACK FOR MORE
SKIPG P3,(P1) ;IF POSITIVE, IS IMMED. ADDR
MOVE P3,(P3) ;IF NEG, IS POINTER
CALLRET SETSA ;SET STARTING ADDR AND RETURN
;ROUTINE TO SAVE MEMORY
;ONLY THOSE PAGES WHICH ARE MAPPED ARE SAVED.
SAVE: MOVE T1,[XWD A%FP0,A%FP0+1] ;CLEAR DESCR PAGE
SETZB P2,A%FP0 ; ...
BLT T1,A%FP0+777 ; ...
TLNE F,(F.DUMP) ;DUMP?
TLO F,(F.PHYS) ;YES - USE PHYSICAL ADDRESSES.
SETOI P1, ;INITIALIZE ADDR
SAV.NP: ADDI P1,1000 ;NEXT PAGE
TLNE P1,-1 ;DONE ALL?
JRST SAV.DN ;YES - WRITE DESCR PAGE
MOVE P4,P1 ;NO - SAVE ADDR FOR WRITE
CALL TSTADR ;IS THIS ADDRESS LEGAL?
JRST SAV.NP ;NO - TRY NEXT PAGE
LSH P4,9 ;MASK LOW ORDER BITS
HLLZS T1,P4 ;SAVE PAGE FOR DESCR
LSH P4,-9 ;RECOVER ADDRESS
TLO T1,520000 ;READ,WRITE,EXECUTE ACCESS
HRRI T1,2(P2) ;FILE PAGE NUMBER
MOVEM T1,A%FP0+1(P2) ;STORE DESCRIPTOR
SKIPN P5,A%XB+2(P2) ;PHYS DISK ADDR - SKIP IF NONE
JRST SV.NP1
CALL WRTPAG ;WRITE THE PAGE
JRST IOERR ;ERROR READING PAGE
SV.NP1: AOJA P2,SAV.NP ;NEXT PAGE
SAV.DN: SKIPE T1,START ;NONZERO START ADDR?
HRLI T1,(<JRST>) ;YES - BUILD SHORT ENTRY
MOVEM T1,A%FP0+1(P2) ;STORE IN DESCR PAGE
TLO P2,1000 ;FINISH DESCRIPTOR BLOCK
MOVEM P2,A%FP0 ;BY STORING TYPE AND COUNT
TLZ F,(F.PHYS) ;CLEAR PHYSICAL ADDRESS REQUEST
MOVEI P4,A%FP0 ;PREPARE FOR FINAL WRITE
MOVE P5,A%XB ; ...
CALL WRTPAG ;WRITE THE DESCR PAGE AND RETURN
JRST IOERR ;ERROR READING PAGE
RET
> ; END OF IFE FT.EXE
IFN FT.EXE, <
; EXE BLOCK TYPE DISPATCH TABLE
EXETAB: .EXDIR ,, G.DIR
.EXEND ,, R
.EXENT ,, G.ENT
EXESIZ==.-EXETAB
; ROUTINE TO GET A FILE FROM DISK TO MEMORY. READS EXE FORMAT FILES.
GET: IFN FT.MTA,< ;ONLY FOR MAGTAPE
SKIPE DIRFLG ;EXE DIRECTORY READ YET ?
JRST G.CLR ;YES, DO NOT READ IT AGAIN
SETOM DIRFLG ;NO, INDICATE WE HAVE READ EXE DIR
> ;END OF IFN FT.MTA CONDITIONAL
SETZM FILPAG ;INITIALIZE FILE PAGE #
MOVEI P4,A%FP0 ;READ INTO FILE PAGE 0
MOVE P5,A%XB+0 ;EXE DIRECTORY IS PAGE 0 OF FILE
CALL REDPAG ;READ THE EXE DIRECTORY PAGE
JRST IOERR ;ERROR READING PAGE
G.CLR: ; ** REMOVED NEXT 2 INSTRUCTIONS UNTIL MAP INSTR FIXED **
TXNE F,F.CLR ;CLEAR CORE ?
CALL CLRCOR ;YES, GO ZERO SOME MEMORY
MOVEI P1,A%FP0 ;INITIALIZE EXE DIRECTORY POINTER
G.DSP: HLRZ T1,(P1) ;GET BLOCK TYPE FROM DIRECTORY
MOVSI T2,-EXESIZ ;FORM AOBJN POINTER TO TYPE TABLE
G.DSP1: HLRZ T3,EXETAB(T2) ;GET A KNOWN BLOCK TYPE CODE
CAMN T3,T1 ;FOUND A VALID BLOCK TYPE ?
JRST G.GO ;YES, GO PROCESS THE BLOCK
AOBJN T2,G.DSP1 ;NO, GO CHECK REMAINING VALID CODES
JRST BIGERR ;BAD FILE FORMAT
G.GO: HRRZ T1,EXETAB(T2) ;GET ADDRESS OF PROCESSING ROUTINE
JRST (T1) ;GO PROCESS BLOCK
; HERE TO PROCESS EXE FILE DIRECTORY BLOCK
G.DIR: HRRZ P2,(P1) ;GET # OF WORDS IN EXE DIRECTORY
SUBI P2,1 ;GET # OF WORDS IN DIRECTORY - 1
ADDI P1,1 ;POINT TO FIRST 2-WORD DESCRIPTOR
G.DIR0: LOAD Q2,DIRPT,(P1) ;GET REPEAT COUNT
ADDI Q2,1 ;GET # OF PAGES TO READ
LOAD P4,DIPRO,(P1) ;GET PROCESS PAGE #
LSH P4,9 ;CONVERT PAGE # TO ADDRESS
LOAD Q1,DIFIL,(P1) ;GET FILE PAGE #
G.DIR1: JUMPE Q1,G.DIR4 ;ALL ZERO PAGE, HANDLE SPECIALLY
CALL TSTADR ;GO SEE IF MEMORY ADDRESS IS LEGAL
JRST G.DIR2 ;NOT LEGAL, GO TRY NEXT PAGE
IFN FT.MTA,< ;DOING MAGTAPE?
CAMGE Q1,FILPAG ;READING PAGE ALREADY PASSED ?
JRST FMTERR ;YES, CANNOT GO BACKWARDS ON TAPE
CAMLE Q1,FILPAG ;NEED NEXT SEQUENTIAL PAGE IN FILE ?
JRST [ PUSH P,P4 ;NO, SAVE CORE ADDRES
MOVEI P4,A%DIR ;GET A USELESS PAGE FOR DUMMY READ
CALL REDPAG ;READ NEXT SEQUENTIAL PAGE
JRST IOERR ;ERROR READING PAGE
POP P,P4 ;RESTORE ORIGINAL CORE ADDRESS
JRST G.DIR1 ] ;GO TRY AGAIN
> ;END OF IFN FT.MTA
MOVE P5,A%XB(Q1) ;GET DISK ADDRESS FROM INDEX BLOCK
CALL REDPAG ;READ A DATA PAGE FROM EXE FILE
JRST IOERR ;ERROR READING PAGE
CALL CHGLIM ;CHANGE PAGE LIMITS IF NECESSARY
G.DIR2: SOJLE Q2,G.DIR3 ;DECREMENT REPEAT COUNT, LOOP IF MORE
ADDI P4,1000 ;NO MORE. POINT TO NEXT PROCESS PAGE
AOJA Q1,G.DIR1 ;GO READ NEXT PAGE OF EXE FILE.
G.DIR3: ADDI P1,.DISIZ ;POINT TO NEXT DESCRIPTOR
SUBI P2,.DISIZ ;DECREMENT DIRECTORY BLOCK WORD COUNT
JUMPE P2,G.DSP ;GO PROCESS NEXT BLOCK IF DONE
JRST G.DIR0 ;GO READ NEXT SET OF PAGES FROM EXE FILE
G.DIR4: CALL TSTADR ;TEST PAGE FOR LEGALITY
JRST G.DIR5 ;BAD PAGE, DO NOT CLEAR IT
SETZM (P4) ;CLEAR FIRST WORD OF PAGE
MOVSI T1,(P4) ;GET START ADDRESS FOR BLT
HRRI T1,1(P4) ;GET DESTINATION ADDRESS FOR BLT
BLT T1,777(P4) ;CLEAR PAGE TO ZEROS
G.DIR5: SOJA Q1,G.DIR2 ;GO SEE IF MORE PAGES TO CLEAR
; HERE TO PROCESS ENTRY VECTOR BLOCK
G.ENT: SKIPN 1(P1) ;ENTRY VECTOR SIZE NON-ZERO ?
JRST FMTERR ;NO, BAD FILE FORMAT
MOVE P3,@2(P1) ;YES, GET START ADDRESS
CALL SETSA ;GO SET STARTING ADDRESS
HRRZ T1,(P1) ;GET SIZE OF ENTRY VECTOR BLOCK
ADD P1,T1 ;UPDATE POINTER INTO EXE DIRECTORY
JRST G.DSP ;GO HANDLE NEXT EXE FILE BLOCK
;SUBROUTINE TO SEE IF THE UPPER LIMIT FOR READING OF A FILE SHOULD
;BE CHANGED AS SPECIFIED BY THE SYMBOL TABLE POINTER. DISABLED IF ANY
;SPECIFIC CORE LIMITS WERE SPECIFIED, OR IF .JBSYM IS ZERO.
CHGLIM: JUMPN P4,R ;ONLY CHECK PAGE 0 OF CORE IMAGE
TXNN F,F.NCHL ;DON'T WANT TO CHANGE THE LIMITS?
SKIPN T1,.JBSYM ;OR HAVE NO SYMBOL POINTER?
RET ;YES, DO NOTHING
HLRE T2,T1 ;GET NEGATIVE LENGTH
SUB T1,T2 ;COMPUTE ADDRESS RIGHT AFTER SYMBOL TABLE
MOVEI T1,-1(T1) ;BACK OFF TO LAST ADDRESS TO READ
LSH T1,-^D9 ;CONVERT TO PAGE NUMBER
MOVEM T1,UPRLIM ;SET NEW UPPER LIMIT
RET ;DONE
; ROUTINE TO DUMP CORE MEMORY TO A (PREALLOCATED) FILE
SAVE: SETZM P2,A%FP0 ;SET UP TO CLEAR EXE DIRECTORY
MOVE T1,[A%FP0,,A%FP0+1] ;PREPARE TO CLEAR EXE DIRECTORY PAGE
BLT T1,A%FP0+777 ;ZERO EXE FILE DIRECTORY PAGE
TXZ F,F.IOER ;INITIALIZE IO ERROR FLAG
MOVEI P2,2 ;GET INITIAL FILE PAGE #
SETZB Q1,Q2 ;CLEAR START PAGE #, # OF PAGES IN SET
SETOI P1, ;INITIALIZE FIRST VIRTUAL ADDRESS
TXNE F,F.DUMP ;DUMP REQUESTED ?
TXO F,F.PHYS ;YES, USE PHYSICAL ADDRESSES
MOVEI Q3,A%FP0+1 ;INITIALIZE DIRECTORY ADDRESS
SAV.NP: ADDI P1,1000 ;COMPUTE NEXT VIRTUAL ADDRESS
TXNN F,F.PHYS ;DOING A DUMP OF PHYSICAL PAGES?
TLNN P1,-1 ;NO, END OF VIRTUAL PAGES?
SKIPA P4,P1 ;NO, GET PAGE NUMBER TO BE DUMPED
JRST SAV.DN ;AT END OF VIRTUAL CORE, GO WRITE DIR
CAML P1,[NCSTPG*1000000] ;AT END OF PHYSICAL CORE?
JRST SAV.DN ;YES, GO WRITE DIRECTORY
CALL TSTADR ;IS THIS ADDRSS LEGAL ?
JRST [ CAML P4,TOPBAS ;ARE WE WHERE BOOT NOW IS?
CAMLE P4,TOPTOP ;ARE WE IN RANGE?
JRST SAV.NS ;NO, GO ON TO NEXT PAGE SET
JRST SAV.NQ] ;YES THEN WRITE THE SAVED DATA
MOVE T1,P2 ;YES, GET START FILE PAGE # OF SET
ADD T1,Q2 ;COMPUTE CURRENT FILE PAGE #
LDB P4,[POINT 18,T1,26] ;GET FILE PAGE NUMBER
JUMPE P4,SAV.NQ ;ZERO IS ALWAYS SET UP CORRECTLY
SKIPGE XBNUM ;IF SHORT FILE, THEN CANNOT GO FURTHER
JRST SAV.NS
CAMN P4,XBNUM ;IS THIS PAGE PART OF THE MAPPED XB?
JRST SAV.NQ ;YES, XB IS SET UP ALREADY
LOAD P5,IDXADR,A%SXB(P4) ;GET ADR OF NEXT XB
JUMPE P5,SAV.NS ;IF NONE, STEP TO NEXT SET
MOVEM P4,XBNUM ;SAVE THE XB NUMBER OF MAPPED XB
MOVEI P4,A%XB ;AND GO READ IN NEW XB
PUSH P,F ;SAVE STATE OF FLAGS
TXZ F,F.PHYS ;DO A VIRTUAL READ
CALL REDPAG
JRST IOERR ;ERROR READING PAGE
POP P,F ;RESTORE FLAGS
SAV.NQ: MOVE T1,P2 ;YES, GET START FILE PAGE # OF SET
ADD T1,Q2 ;COMPUTE CURRENT FILE PAGE #
IDIVI T1,1000 ;GET ADR WITHIN THIS XB
MOVE P4,P1 ;GET BACK THE PAGE TO BE WRITTEN
;THIS SECTION PLAYS MAPPING GAMES. BOOT LANDED IN LOW CORE AND MOVED ITSELF.
;WHILE MOVING ITSELF TO HIGH CORE IT SAVED THE HIGH CORE DATA IN THE AREA IT
;LANDED IN. NOW WE ARE WRITING A DUMP FILE. THE AREA WHERE BOOT LANDED
;(WHICH NOW HOLDS SAVED HIGH CORE INFORMATION) WILL NOT BE WRITTEN INTO A DUMP
;FILE. INSTEAD THE LOW CORE AREA WILL BE WRITTEN OUT IN IT'S "VIRTUAL" HIGH
;CORE ADDRESS.
CAML P4,LODBAS ;SKIP OVER AREA WHERE BOOT LANDED
CAMLE P4,LODTOP ;ARE WE IN RANGE?
SKIPA ;NO - CONTINUE NORMALLY
JRST SAV.NS ;YES - SKIP THIS PAGE
CAML P4,TOPBAS ;ARE WE WHERE BOOT NOW IS?
CAMLE P4,TOPTOP ;ARE WE IN RANGE?
SKIPA ;NO - CONTINUE NORMALLY
JRST [ SUB P4,TOPBAS ;YES - COMPUTE PAGE NUMBER WITHIN AREA
ADD P4,LODBAS ;ADDRESS OF WHERE SAVED DATA LIVES
JRST .+1] ;SAVE THE PAGE HERE
LOAD P5,IDXADR,A%XB(T2) ;GET DISK ADDRESS
JUMPE P5,SAV.NS ;NO DISK ADDRESS, START NEW PAGE SET
CALL WRTPAG ;WRITE THE DATA PAGE
TXO F,F.IOER ;MARK THAT AN ERROR OCCURED
AOS Q2 ;COUNT UP THE PAGES WRITTEN
CAIGE Q2,1000 ;REACHED THE END OF A SECTION?
JRST SAV.NP ;NO
SAV.NS: JUMPE Q2,SAV.ES ;GO UPDATE START PAGE # IF NULL PAGE SET
CAIGE Q2,1000 ;EARLY QUITTING?
SUBI P1,1000 ;YES MUST RETEST THIS PAGE
CAILE Q3,A%FP0+777-.DISIZ-.EBSIZ-.VBSIZ+1 ;DIRECTORY TOO BIG ?
JRST BIGERR ;YES, DIRECTORY BIGGER THAN 1 PAGE
MOVEI T1,100 ;GET DI%WRT BIT, STORE IN FLAG WORD
STOR T1,DIFLG,(Q3) ; ** DON'T USE SETONE, CLOBBERS AC16 **
STOR P2,DIFIL,(Q3) ;STORE STARTING PAGE NUMBER
SOS Q2 ;GET CORRECT REPEAT COUNT
STOR Q2,DIRPT,(Q3) ;STORE REPEAT COUNT
STOR Q1,DIPRO,(Q3) ;STORE PROCESS PAGE #
ADDI Q3,.DISIZ ;POINT TO NEXT DESCRIPTOR
ADDI Q1,0(Q2) ;COUNT UP PROCESS PAGE #
ADDI P2,1(Q2) ;GET CORRECT NEXT FILE PAGE #
SAV.ES: SETZM Q2 ;RESET SIZE OF PAGE SET
AOJA Q1,SAV.NP ;GO WRITE NEXT PAGE SET
;STEP OVER NONEXISTENT PAGE IN CORE
SAV.DN: MOVEI T1,.EXDIR ;GET DIRECTORY BLOCK TYPE
STOR T1,DIDIR ;STORE IN EXE DIRECTORY
MOVEI T1,-A%FP0(Q3) ;GET SIZE OF EXE DIRECTORY
STOR T1,DISIZ ;STORE SIZE OF DIRECTORY BLOCK
MOVEI T1,.EXENT ;GET ENTRY VECTOR BLOCK TYPE
STOR T1,VBTYP,(Q3) ;PUT BLOCK TYPE IN ENTRY VECTOR BLOCK
MOVEI T1,.VBSIZ ;GET SIZE OF ENTRY VECTOR BLOCK
STOR T1,VBSIZ,(Q3) ;STORE SIZE OF ENTRY VECTOR BLOCK
MOVEI T1,EVLEN ;GET LENGTH OF ENTRY VECTOR
STOR T1,VBCNT,(Q3) ;STORE LENGTH OF ENTRY VECTOR
MOVEI T1,EVADR ;GET ADDRESS OF ENTRY VECTOR
STOR T1,VBADR,(Q3) ;STORE ADDRESS OF ENTRY VECTOR
ADDI Q3,.VBSIZ ;POINT TO NEXT BLOCK IN EXE DIRECTORY
MOVEI T1,.EXEND ;GET END BLOCK TYPE CODE
STOR T1,EBTYP,(Q3) ;STORE BLOCK TYPE IN END BLOCK
MOVEI T1,.EBSIZ ;GET SIZE OF END BLOCK
STOR T1,EBSIZ,(Q3) ;STORE SIZE OF END BLOCK
TXZ F,F.PHYS ;TURN OFF PHYSICAL ADDRESSES
SKIPG XBNUM ;DO WE HAVE XB 0 MAPPED IN
JRST SAV.D1 ;YES
LOAD P5,IDXADR,A%SXB+0 ;NO, GO MAP IT IN
MOVEI P4,A%XB ;READ INTO XB PAGE
CALL REDPAG
JRST IOERR ;ERROR READING PAGE
SAV.D1: LOAD P5,IDXADR,A%XB+0 ;WRITE OUT PAGE 0 OF FILE
JUMPE P5,FMTERR ;IF NO PAGE 0, BOMB OUT
MOVEI P4,A%FP0 ;GET CORE ADDRESS OF EXE DIRECTORY
CALL WRTPAG ;WRITE DIRECTORY PAGE AND RETURN
TXO F,F.IOER ;MARK THAT AN ERROR OCCURED
TXNE F,F.IOER ;ANY ERRORS?
JRST IOERR ;YES, GO TELL USER
RET ;ALL DONE
> ; END OF IFN FT.EXE
LIT
IFG <A%VORG-.>,<BLOCK <A%VORG-.>>
BLOCK <777-<.&777>>
JRST VBOOT ;MUST BE LAST INSTRUCTION IN LAST PAGE
IFG <.-A%VORG-1000>,<PRINTX ?MAXIMUM CODE SIZE EXCEEDED>
DEPHASE
CODEND:
;**;[5.1095] Change 3 lines at BOTMOV: +0L JGZ 14-JUL-80
BOTMOV: MOVE P5,(P3) ;[5.1095] GET NONBOOT WORD
EXCH P5,(P2) ;[5.1095] EXCHANGE WITH BOOT
MOVEM P5,(P3) ;[5.1095] BOOT INTO HIGH CORE
AOS P2 ;NEXT WORD
AOS P3 ;...
SOJG P4,T1 ;DO ALL WORDS
;**;[5.1095] Change 1 line at MOVEND: +0L JGZ 14-JUL-80
MOVEND: JRST <CORMVD-ENT>+<A%CODE-1000-A%VORG>(P1) ;[5.1095] GO TO MOVED BOOT
;**;[5.1095] Add 4 lines at MOVEND: +2L JGZ 14-JUL-80
;PAGE FAULT HANDLER UNTIL AFTER BOOT IS MOVED
PAGTRP: AOS CODEND-ENT+UPTPFO(16) ;[5.1095] THE PC OF THE PAGE FAIL
JRST @CODEND-ENT+UPTPFO(16) ;[5.1095] PROCEED
> ;END IFN FT.PRT&2
IFN FT.PRT&1,<END JRST ENT> ;GIVE START ADR IF ASSEMBLED PT 1
BLOCK <777-<.&777>>
END