Trailing-Edge
-
PDP-10 Archives
-
BB-Y393D-SM
-
monitor-sources/prokl.mac
There are 29 other files named prokl.mac in the archive. Click here to see a list.
; UPD ID= 257, FARK:<4-1-WORKING-SOURCES.MONITOR>PROKL.MAC.2, 9-Dec-82 16:09:51 by MOSER
;EDIT 2875 - ADD .DFBKW
;<4-1-FIELD-IMAGE.MONITOR>PROKL.MAC.2, 25-Feb-82 20:45:54, EDIT BY DONAHUE
;UPDATE COPYRIGHT DATE
;<4.MONITOR>PROKL.MAC.13, 3-Jan-80 08:10:20, EDIT BY R.ACE
;UPDATE COPYRIGHT DATE
;<4.MONITOR>PROKL.MAC.12, 6-Mar-79 09:58:08, EDIT BY KONEN
;UPDATE COPYRIGHT FOR RELEASE 4
;<4.MONITOR>PROKL.MAC.11, 5-Feb-79 21:09:04, Edit by MCLEAN
;<4.MONITOR>PROKL.MAC.10, 2-Feb-79 23:33:36, Edit by MCLEAN
;ADD NEW FUNCTION .DFXEN FOR XENF SUPPORT IN THE FRONT-END
;<3A.MONITOR>PROKL.MAC.9, 4-May-78 01:14:24, Edit by MCLEAN
;REMOVE CHNOFF/CHNON TO PROLOG
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY ONLY BE USED
; OR COPIED IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
;COPYRIGHT (C) 1976,1977,1978,1979,1980,1981,1982 BY DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
UNIVERSAL PROKL
SALL
SEARCH MONSYM,MACSYM
IF2,< ;ONLY ONE PASS NEEDED
;BITS FOR DATAO APR (ADDRESS BREAK)
ABIF==:1B9 ;INSTRUCTION FETCH
ABDR==:1B10 ;DATA READ
ABDW==:1B11 ;DATA WRITE
ABUM==:1B12 ;USER MODE (PC, NOT VMA)
GOPDEF APRID,<BLKI 0,0>
GOPDEF WRFIL,<BLKO 0,0>
GOPDEF RDERA,<BLKI 4,0>
GOPDEF SBDIAG,<BLKO 4,0>
GOPDEF CLRPT,<BLKO 10,0>
GOPDEF CCHIA,<DATAI 14,0> ;INVALIDATE ALL
GOPDEF CCHVA,<BLKO 14,0> ;VALIDATE ALL
GOPDEF CCHUA,<DATAO 14,0> ;UNLOAD ALL
GOPDEF CCHIO,<CONI 14,0> ;INVALIDATE ONE PAGE
GOPDEF CCHVO,<CONSZ 14,0> ;VALIDATE ONE PAGE
GOPDEF CCHUO,<CONSO 14,0> ;UNLOAD ONE PAGE
GOPDEF RDPERF,<BLKI 20,0>
GOPDEF WRPAE,<BLKO 20,0>
GOPDEF RDMACT,<BLKI 24,0>
GOPDEF RDEACT,<DATAI 24,0>
;FRONT END DEFINITIONS FOR THE KL-20 CONFIGURATION
;PROTOCOL DEVICE VECTOR OFFSETS
DTVSD==:0 ;HERE IS STRING DATA
DTVACK==:1 ;LINE BUFFER EMPTY (OR ACKNOWLEDGE)
DTVTLS==:2 ;STATUS
DTVTLA==:3 ;SET LINE ALLOCATION
DTVSER==:4 ;RETURN SYSERR INFORMATION
DTVRLD==:5 ;RELOAD ENTRY
;UNIVERSAL COMMUNICATIONS DEFINITIONS
KPALIV==:5 ;OFFSET FOR KEEP ALIVE COUNTER
;INTERFACE TO DTEQ
DTBYTM==:1B18 ;BIT TO FORCE BYTE MODE TO DTEQ
;THE FRONT END PSEUDO DEVICES
.FECTY==:1 ;THE CTY ON THE DL11-C
.FEDL1==:2 ;THE DL11C (OR E) ON THE MASTER -11
.FEDH1==:3 ;THE DH11 LINES 1 TO WHATEVER
.FEDLS==:4 ;THE DATA LINE SCANNER
.FELPT==:5 ;THE LINE PRINTER
.FECDR==:6 ;THE CARD READER
.FEFE==:10 ;THE SOFTWARE FRONT END DEVICE
;THE FRONT END FUNCTION CODES
.DFLCI==1 ;LINE COUNT IS
.DFHSD==:3 ;HERE IS STRING DATA
.DFHLC==:4 ;HERE ARE LINE CHARACTERS
.DFRDS==:5 ;REQUEST DEVICE STATUS
.DFSDO==:6 ;SPECIAL DEVICE OPERATION
.DFLPC==1 ;LOAD PAGE COUNTER
.DFSTS==:7 ;HERE IS DEVICE STATUS
.DFESD==:10 ;ERROR ON DEVICE
.DFRTD==:11 ;REQUEST TIME OF DAY
.DFHTD==:12 ;HERE IS TIME OF DAY
.DFFDO==:13 ;FLUSH OUTPUT (SENT TO 11 ONLY)
.DFSTA==:14 ;SEND TO ALL (SENT TO 11 ONLY)
.DFLDU==:15 ;A LINE DIALED UP (FROM 11 ONLY)
.DFLHU==:16 ;A LINE HUNG UP OR LOGGED OUT
.DFLBE==:17 ;LINE BUFFER BECAME EMPTY
.DFXOF==:20 ;XOF COMMAND TO THE FE
.DFXON==:21 ;XON COMMAND TO THE FE
.DFSPD==:22 ;SET TTY LINE SPEED
.DFHLA==:23 ;HERE IS LINE ALLOCATION
.DFHRW==:24 ;HERE IS -11 RELOAD WORD
.DFACK==:25 ;GO ACK ALL DEVICES AND UNITS
.DFTOL==:26 ;TURN OFF/ON LINE
.DFTLO==:0 ;TURN IT OFF
.DFTOO==:1 ;TURN IT ON
.DFEDR==:27 ;ENABLE/DISABLE DATASETS
.DFLTR==:30 ;LOAD TRANSLATION RAM
.DFLVF==:31 ;LOAD VFU
.DFMSG==:32 ;SUPPRESS SYSTEM MESSAGES TO TTY
.DFKLS==:33 ;SEND KLINIK DATA TO THE -11
.DFXEN==:34 ;ENABLE XON (SENT TO 11 ONLY)
;**;[2875]ADD 1 LINE AT .DFXEN==:+0L TAM 9-DEC-82
.DFBKW==:35 ;[2875] BREAK THROUGH WRITE
;DEFINE THE DTE DEVICES
DTE0==:200
DTE1==:204
DTE2==:210
DTE3==:214
;UNIVERSAL COMM REGION DEFINITIONS
COMRGN==:^D8 ;SIZE OF A "TO" PROCESSOR BLOCK
COMDAT==:^D16 ;SIZE OF OWNING PROCESSOR BLOCK
REPEAT 0,< ;DEFS ARE NOW IN NSPSRV
;DEFINITIONS FOR MCB MESSAGES
MSHDR==:4 ;SIZE OF MESSAGE HEADER
DEFSTR (MSLNK,0,35,36) ;LINK WORD
DEFSTR (MSDTE,1,2,3) ;DTE # OR ALL ONES FOR LOCAL CONNECITON
DEFSTR (MSSEG,1,17,12) ;SEG # OF MESSAGE
DEFSTR (MSLLA,1,33,16) ;LL ADDRESS
DEFSTR (MSTOM,1,35,2) ;TYPE OF THIS MESSAGE
MSCTL==0 ;CONTROL MESSAGE
MSLSI==1 ;LS/INT MESSAGE
MSDAT==2 ;DATA MESSAGE
DEFSTR (MSCNT,2,35,12) ;# OF BYTES IN MESSAGE
DEFSTR (MSDTC,2,23,12) ;# OF BYTES EXCLUDING NSP OVERHEAD BYTES
DEFSTR (MSMFL,2,11,12) ;MESSAGE FLAGS
MSBPTR==3 ;BYTE POINTER TO DATA PART OF MESSAGE
> ;END OF REPEAT 0
;DTE CONI/CONO BIT DEFINITIONS
DTEPRV==:1B20 ;RESTRICTED/PRIVILEGED BIT
DTEPF==:1B21 ;POWER FAIL IN -11
DTEEDB==:1B22 ;TO -11 DOORBELL
DTECER==:1B23 ;CLEAR -11 RELOAD BUTTON
DTESER==:1B24 ;THE ELECTRONIC FINGER
DTETDB==:1B26 ;TO -10 DOORBELL
DTEEER==:1B27 ;TO -11 ERROR
DTEEDN==:1B29 ;TO -11 DONE
DTETDN==:1B30 ;TO -10 DONE
DTETER==:1B31 ;TO -10 ERROR
DTEPIE==:1B31 ;ENABLE PI'S
DTEPI0==:1B32 ;ENABLE PI 0
;MONITOR PROTOCOL COMMANDS
DTEEMP==:11B27 ;ENTER MONITOR PROTOCOL
DTEEPP==:12B27 ;ENTER PRIMARY PROTOCOL
DTEMNO==:4000 ;OUTPUT CHARACTER
;CONI/CONO PI
PI=:4 ;DEVICE CODE FOR PI
PICHON=:1B25 ;TURN CHANNELS ON
PICHOF=:1B26 ;TURN CHANNELS OFF
PIPIOF=:1B27 ;TURN PI SYSTEM OFF
PIPION=:1B28 ;TURN PI SYSTEM ON
;***** END OF IF2 AT BEGINNING OF FILE *****
>
END