Trailing-Edge
-
PDP-10 Archives
-
BB-Y393F-SM
-
monitor-sources/ttfedv.mac
There are 21 other files named ttfedv.mac in the archive. Click here to see a list.
; UPD ID= 258, FARK:<4-1-WORKING-SOURCES.MONITOR>TTFEDV.MAC.3, 9-Dec-82 16:11:10 by MOSER
;EDIT 2875 - USE .DFBKW TO DO XON/XOFF
; UPD ID= 48, FARK:<4-1-WORKING-SOURCES.MONITOR>TTFEDV.MAC.2, 3-Apr-82 19:13:17 by ZIMA
;Edit 2607 - add ENDAV.s to ACVARs to use v5 MACSYM.
;<4-1-FIELD-IMAGE.MONITOR>TTFEDV.MAC.2, 25-Feb-82 20:50:59, EDIT BY DONAHUE
;UPDATE COPYRIGHT DATE
;<4.MONITOR>TTFEDV.MAC.52, 3-Jan-80 08:10:39, EDIT BY R.ACE
;UPDATE COPYRIGHT DATE
;<4.MONITOR>TTFEDV.MAC.51, 1-Nov-79 17:15:09, EDIT BY MILLER
;<4.MONITOR>TTFEDV.MAC.50, 1-Nov-79 15:54:35, EDIT BY MILLER
;<4.MONITOR>TTFEDV.MAC.49, 1-Nov-79 10:01:55, EDIT BY MILLER
;<4.MONITOR>TTFEDV.MAC.48, 31-Oct-79 16:37:25, EDIT BY MILLER
;<4.MONITOR>TTFEDV.MAC.47, 31-Oct-79 16:13:10, EDIT BY MILLER
;FLUSH ALL DTE Q REQUESTS WHEN DYNAMIC DATA IS DEASSIGNED
;<4.MONITOR>TTFEDV.MAC.46, 31-Oct-79 13:08:36, EDIT BY ENGEL
;ADD MORE DISPATCH VECTOR NAMES TO TTFEVT
;<4.MONITOR>TTFEDV.MAC.45, 31-Oct-79 12:46:44, EDIT BY MILLER
;FIX HANDLING OF TTFPK. MAKE STRIO CONDITIONAL ON VALUE OF TTFPK.
;<4.MONITOR>TTFEDV.MAC.44, 31-Oct-79 10:20:25, EDIT BY ENGEL
;ADD DISPATCH VECTOR NAMES TO TTFEVT
;<4.MONITOR>TTFEDV.MAC.43, 30-Oct-79 17:26:31, EDIT BY MILLER
;CHECK AT TTYINT FOR TTOCT GOING NEGATIVE. IF SO, ASSUME CFOBF
; HAS JUST BEEN DONE AND DON'T UPDATE THE COUNT
;<4.MONITOR>TTFEDV.MAC.42, 24-Oct-79 16:14:15, EDIT BY MURPHY
;FASTER WAKEUP ON OUTPUT EVENTS
;<4.MONITOR>TTFEDV.MAC.41, 10-Oct-79 13:48:26, EDIT BY MURPHY
;FIX PROBLEMS WITH XOFF/XON
;<4.MONITOR>TTFEDV.MAC.38, 19-Sep-79 14:51:29, EDIT BY MURPHY
;CHANGE VECTOR OFFSET NAMES
;<OSMAN.MON>TTFEDV.MAC.1, 10-Sep-79 16:13:38, EDIT BY OSMAN
;TCO 4.2412 - Move definition of BUGHLTs, BUGCHKs, and BUGINFs to BUGS.MAC
;<4.MONITOR>TTFEDV.MAC.36, 3-Jul-79 13:19:52, Edit by MCLEAN
;MAKE CALL IN BIGST1 DO CALL TTQAD1 INSTEAD OF TTQAD
;<4.MONITOR>TTFEDV.MAC.35, 12-Jun-79 14:25:27, Edit by MCLEAN
;<4.MONITOR>TTFEDV.MAC.34, 12-Jun-79 11:26:33, Edit by MCLEAN
;DO XON/XOFF STATE BEFORE SETTING SPEED
;<4.MONITOR>TTFEDV.MAC.33, 15-May-79 12:47:25, Edit by MCLEAN
;MORE FIXES FOR LINE XOFF WHEN NOT ACTIVE
;<4.MONITOR>TTFEDV.MAC.32, 15-May-79 10:13:37, Edit by MCLEAN
;<4.MONITOR>TTFEDV.MAC.31, 15-May-79 09:39:06, Edit by MCLEAN
;REMOVE SPEED CODE FROM SNDXN2
;<4.MONITOR>TTFEDV.MAC.30, 13-May-79 21:51:14, Edit by MCLEAN
;GET CORRECT HALF WORD FOR TTSPWD FOR XOFF
;<4.MONITOR>TTFEDV.MAC.29, 30-Apr-79 22:57:07, Edit by MCLEAN
;STOP LINES THAT GET 2 CHARACTERS IN INPUT BUFFER BEFORE LINE IS ACTIVE
;<4.MONITOR>TTFEDV.MAC.28, 11-Mar-79 13:14:10, EDIT BY KONEN
;UPDATE COPYRIGHT FOR RELEASE 4
;<4.MONITOR>TTFEDV.MAC.27, 16-Feb-79 12:56:59, Edit by MCLEAN
;FIX COMMENTS AND REMOVE BLANK PAGE
;<4.MONITOR>TTFEDV.MAC.26, 16-Feb-79 12:51:46, Edit by MCLEAN
;FIX STORING OF LINE
;<4.MONITOR>TTFEDV.MAC.25, 13-Feb-79 13:32:02, Edit by MCLEAN
;REMOVE COMMENT CALL IN TTEXF TO DTEQ
;<4.MONITOR>TTFEDV.MAC.24, 12-Feb-79 17:20:02, Edit by MCLEAN
;TTEXF NEEDED A DYNST
;<4.MONITOR>TTFEDV.MAC.23, 10-Feb-79 17:16:09, Edit by MCLEAN
;NEW CHANGES FOR FRONT-END DOING XOFF
;<4.MONITOR>TTFEDV.MAC.22, 5-Feb-79 21:09:32, Edit by MCLEAN
;<4.MONITOR>TTFEDV.MAC.21, 3-Feb-79 00:34:14, Edit by MCLEAN
;<4.MONITOR>TTFEDV.MAC.20, 2-Feb-79 23:39:54, Edit by MCLEAN
;ADD NEW VECTOR VSFEXO FOR XOFF RECOGNITION IN FRONT END ;ENABLE/DISABLE FRONT-END XOFF RECOGNITION
;<4.MONITOR>TTFEDV.MAC.19, 25-Jan-79 18:26:32, Edit by MCLEAN
;FIX SNDXO1+5 SO IT GOES TO SNDXO3 NOT R
;<4.MONITOR>TTFEDV.MAC.18, 24-Jan-79 00:11:42, Edit by MCLEAN
;FIX STI OF XON COULD CRASH SYSTEM WITH KEEPALIVE
;<4.MONITOR>TTFEDV.MAC.17, 21-Jan-79 18:01:01, Edit by MCLEAN
;FIX SO XON HAS COUNT IS FROM EMPTY NOT FULL
;<4.MONITOR>TTFEDV.MAC.16, 14-Jan-79 15:07:57, Edit by MCLEAN
;REMOVE CODE REQUIRED FOR NON-RESIDENT TTSPWD
;<4.MONITOR>TTFEDV.MAC.14, 14-Jan-79 02:11:26, Edit by MCLEAN
;FIX IT SO TTXCN DOESN'T OVERFLOW
;<4.MONITOR>TTFEDV.MAC.13, 8-Jan-79 14:40:47, Edit by MCLEAN
;MAKE STPLNF FASTER AND SMALLER IT SHOULD ONLY SHUT OFF LINE FOR SHORT TIME
;<4.MONITOR>TTFEDV.MAC.12, 7-Jan-79 19:51:10, Edit by MCLEAN
;FIX CUTOFF FOR XON/XOFF
;<4.MONITOR>TTFEDV.MAC.10, 28-Dec-78 22:43:55, Edit by MCLEAN
;ADD VSTPLN STOP LINE (ABORT LINE AS IN NO INPUT!) ;STOP LINE
;<4.MONITOR>TTFEDV.MAC.8, 13-Nov-78 21:50:42, Edit by MCLEAN
;FIX TTXON SO IT DOES CHANNEL OFF BEFORE CALLING BIGSTO
;<4.MONITOR>TTFEDV.MAC.7, 13-Nov-78 21:48:15, Edit by MCLEAN
;REMOVE ADDM F,TTOCT(B) AT RSCHED+1 IT REALLY WAS WRONG THING TO DO
;<2MCLEAN>TTFEDV.MAC.6, 23-Oct-78 22:09:24, Edit by MCLEAN
;<2MCLEAN>TTFEDV.MAC.5, 8-Oct-78 21:32:28, Edit by MCLEAN
;<2MCLEAN>TTFEDV.MAC.4, 7-Oct-78 22:30:11, Edit by MCLEAN
;REMOVE OBFFR FOR SPEED
;<4.MONITOR>TTFEDV.MAC.5, 13-Oct-78 15:14:51, Edit by MCLEAN
;REMOVE FIX FOR XOFF FAILURE WE REALLY DON'T WANT TO CLEAR BIT HERE
;BECAUSE XOFF WILL BE DONE AGAIN.
;<4.MONITOR>TTFEDV.MAC.4, 8-Oct-78 21:30:14, Edit by MCLEAN
;TTMSAL AND A JUMPGE B,2 I PRESUME IT SHOULD HAVE BEEN JUMPGE 2,R
;<4.MONITOR>TTFEDV.MAC.3, 27-Sep-78 22:30:28, Edit by MCLEAN
;FIX XOFF SO FAILURE ON DTEQ WORKS CORRECTLY
;<4.MONITOR>TTFEDV.MAC.2, 27-Sep-78 09:39:27, EDIT BY MILLER
;ALWAYS SEND XOFF WHEN SNDXO2 IS CALLED
;<4.MONITOR>TTFEDV.MAC.1, 18-Jul-78 15:57:57, EDIT BY MILLER
;CHANGE DTESTO TO USE TTIDON.
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY ONLY BE USED
; OR COPIED IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
;COPYRIGHT (C) 1976,1977,1978,1979,1980,1981,1982 BY DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
SUBTTL FRONT-END DEPENDENT CODE
;FRONT-END DEPENDENT CODE FOR TTYSRV
;THIS MODULE IS NECESSARY TO SUPPORT THE KL10 -DTE20 INTERFACE
;FOR TTYSRV. IT DOES ALL THE DEVICE SPECIFIC FUNCTIONS AND
;PROCESSES DATA TO AND FROM THE FRONT END.
;DEFINITIONS FOR TTDEV FOR FE TYPE LINES
;DEFINITIONS FOR TT.FE LINE TYPE
TT%FOW==1B1 ;LINE ALLOCATION EXCEEDED
MSKSTR TTFOW,TTDEV,TT%FOW
DEFSTR TTFCT,TTDEV,27,8 ;NUMBER BYTES IN FRONT END
DEFSTR TTFMC,TTDEV,35,8 ;MAX BYTES IN FRONT END
SPCLIN==4 ;HIGHEST SPECIAL LINE NUMBER
;
; FRONT-END VECTOR TABLE ENTRYS
;
RESCD
TTFEVT=.
TTDDLN ;DDLEN - LENGTH OF DYNAMIC DATA FOR THIS TYPE
-1 ;TT1LIN - FIRST LINE OF THIS TYPE/-1 NO LINES
IFIW!R ;VITBLS - INITALIZATION
IFIW!R ;VACTLN - RESTART
IFIW!TTCOB4 ;VCLOBF - CLEAR OUTPUT BUFFER
IFIW!TTSSP2 ;VSETSP - SET LINE SPEED
IFIW!TTRSP1 ;VGETSP - RETURN LINE SPEED
IFIW!TTSNT1 ;VSETTS - SUPRESS SYS MESSAGES
IFIW!TTRNT1 ;VGETTS - RETURN NON-TERMINAL DEV STATUS
IFIW!TTSTO3 ;VSTO - STOP ACTIVE LINE
IFIW!R ;VSTPAR - SET TERMINAL CHARACT
IFIW!RSKP ;VCKPHY - PHYSICAL TERMINAL
IFIW!TTXON1 ;VXON -XON ;PROCESS XON FROM TERMINAL
IFIW!TTYDE0 ;VDETDB - DEASIGN DYNAMIC DATA
TRO 1,200 ;VOPAR - APPLY PARITY
IFIW!STRTO7 ;VSTOUT - START OUTPUT LINE
IFIW!SNDXO2 ;VSXOFF - SEND XOFF
IFIW!SNDXN2 ;VSXON - SEND XON
IFIW!TTCQ1 ;VTTCS - EMPTY BUFFER
IFIW!TTCON1 ;VCON - CARRIER ON
IFIW!NTYCOF ;VCOFF - CARRIER OFF
IFIW!TTHU2 ;VHNGUP - HANGUP
IFIW!TTCHI3 ;VXOFF - STOP LINE ;PROCESS XOFF FROM TERMINAL
IFIW!TTC7S1 ;RNEWCC - LOCAL/REMOTE CHECK FOR LOGIN
IFIW!BIGST2 ;VSTOBB - LINE STORAGE
IFIW!TTSND1 ;VSNDCH - SEND CHARACTER
IFIW!TTDAL6 ;VDET - DEALLOCATE LINE
IFIW!DLSSX2 ;VBBOV - HANDLE OVERFLOW OF TTBUFF
IFIW!R ;VGCHBB - EMPTY BUFFER
IFIW!RSKP ;VTTMSG - OK TO DO SENDALL FOR A LINE ;DO TTMSG FOR ONE LINE?
IFIW!FEDABL ;TSETDS - DISABLE ENABLE
IFIW!R ;VCKLIN - TTCH7 AFTER EMPTYING BUFFER
IFIW!R ;VCLIBF - CLEAR INPUT BUFFER
IFIW!TTDBEF ;VDOBE - DOBE
IFIW!R ;VHNGRY - INPUT GA
IFIW!TTSETF ;VSINIV - SET INIT. VALUES FOR A LINE
IFIW!TTSBEF ;VSOBE - SOBE
IFIW!TTOBEF ;VDOBET - WAKEUP IF OUTPUT BUFFER EMPTY
IFIW!TTMSSN ;VSNDA1 - DO ACTUAL SENDALL FOR A LINE ;SENDALL FOR ONE LINE
IFIW!TTMSAL ;VSNDAL - DO SENDALL FOR ALL LINES ;SENDALL FOR ALL LINES
JFCL ;VAJWCL - ADJUST WAKEUP CLASS ;ADJUST WAKEUP CLASS
IFIW!STPLNF ;VSTPLN - STOP LINE ;STOP LINE
IFIW!TTEXF ;VSFEXO - ENABLE/DISABLE XOFF RECOGNITION IN FRONT-END ;ENABLE/DISABLE FRONT-END XOFF RECOGNITION
IFN <.-TTVTMX>-TTFEVT,<PRINTX %%INVALID DEVICE DEPENDENT TABLE SIZE>
;DEASSIGN DYNAMIC DATA
; 2/STATIC LINE NUMBER
REPEAT 0,< ;A GOOD IDEA THAT DIDN'T HELP
TTYDEF: NOSKD1 ;OWN MACHINE
SKIPG TTACTL(B) ;FULLY ACTIVE LINE?
JRST TTYDF0 ;NO. GIVE UP THEN
PUSH P,B ;SAVE LINE NUMBER
MOVE A,MSTRDT ;GET DTE #
MOVSI C,0(B) ;GET LINE #
MOVEI B,.FEDLS ;GET DEVICE
CALL FIXARG ;FIX UP ARGS
CHNOFF DLSCHN ;AND THE CHANNEL AS WELL
CALL DTEFLA ;FLUSH ALL PACKETS FOR THE LINE
CHNON DLSCHN ;UNDO OWNERSHIP
POP P,B ;RESTORE REG
TTYDF0: OKSKD1 ;AND THIS TOO
JRST TTYDE0 ;AND DONE
> ;END OF REPEAT 0
;START I/O
; 2/ DYNAMIC DATA ADDRESS
STRTO7: DYNST T3 ;GET STATIC BLOCK
JN TTFPK,(T3),STRT11 ;IF ON, DON'T START OUTPUT
JRST STRTO1 ;NOT. GO TO IT
; CLEAR OUTPUT BUFFER ROUTINE
TTCOB4: STKVAR <TTCBSV>
MOVEM B,TTCBSV ;SAVE ADDRESS OF DYNAMIC DATA
DYNST ;GET LINE NUMBER
MOVE D,B ;GET COPY OF LINE NUMBER
MOVS C,B ;LINE NUMBER
MOVEI B,.FEDLS ;GET DEVICE CODE
MOVE A,MSTRDT ;MASTER DTE, NO POST
CALL FIXARG ;GET PROPER ARGS
EXCH D,TTCBSV ;GET BACK DYNAMIC DATA
OPSTR <SKIPE>,TTOTP,(D) ;OUTPUT IN PROGRESS?
JRST [ EXCH D,TTCBSV ;YES. GET BACK ORIGINAL ARGUMENT
PUSHJ P,DTEFLO ;YES, FLUSH DTE REQUESTS
JRST TTCBF5]
EXCH D,TTCBSV ;GET BACK ORIGINAL ARGUMENT
TTCBF5: MOVS D,C ;LINE NUMBER AS ARG
SETZ C,
HRLI B,.DFFDO ;FLUSH FUNCTION
CALL DTEQ ;QUEUE IT UP
JFCL ;DOESN'T MATTER
MOVE B,TTCBSV ;GET BACK DYNAMIC DATA
JRST TTCOB5
SWAPCD
; SET TERMINAL SPEED
TTSSP2: SKIPN FEFLG ;IN PRIMARY PROTOCOL?
RET ;NO. IGNORE IT THEN
ACVAR <W1> ;GET A WORK REG
UMOVE W1,2 ;GET FLAGS
TXNE W1,MO%AUT ;DECLARING AUTO SPEED?
JRST [ TXNE W1,MO%RMT ;YES. ALSO WANT REMOTE?
JRST .+1 ;YES. PROCEED THEN
RET] ;NO. ILLEGAL REQUEST
NOINT ;PREVENT INTS
CALL ASGALL ;ASSIGN THE BUFFER
MOVE C,[POINT ^D16,SNDALL]
UMOVE D,C ;GET USER'S ARGS
HLRZ A,D ;GET INPUT SPEED
JN TTAUT,(B),TTSSP4 ;IF NOW AUTO, SET THE SPEED
OPSTR <SKIPN>,TTFEM,(B) ;ALREADY REMOTE?
TTSSP4: TXNE W1,MO%AUT ;NO. DECLARING AUTO?
SKIPA ;DON'T SET SPEED
MOVEM D,TTSPWD(B) ;SET THE NEW SPEED
CALL TTEXFA ;SET XON/XOFF STATE
TTSSP1: IDPB A,C ;STORE INPUT
IDPB D,C ;STORE OUTPUT SPEED
MOVEI D,0(D)
MOVEI A,1 ;ASSUME ONE STOP BIT
CAIG D,^D110 ;LESS THAN OR EQUAL TO 110 BAUD?
MOVEI A,2 ;YES. USE 2 STOP BITS THEN
TXNE W1,MO%RMT ;WANT REMOTE?
JRST [ MOVX D,SC%OPR!SC%WHL ;YES. SEE IF PRIVILEGED
TDNN D,CAPENB ;IS IT?
JRST TTSSP3 ;NO. ERROR
TRO A,(1B2) ;SET HIGH ORDER BIT
LOAD D,TTFEM,(B)
SETONE TTFEM,(B) ;SAY IS REMOTE
TXNE W1,MO%AUT ;WANT "AUTO" SPEED?
JRST [ SETONE TTAUT,(B) ;SET INDICATOR
TRO A,(1B3) ;SET BIT IN MESSAGE TO FE
JRST TTSSP5] ;AND PROCEED
JUMPE D,.+1 ;IF NOT NOW REMOTE, DECLARE SPEED
UMOVE D,C ;YES. GET DEFAULT DECLARATION
MOVEM D,TTSPWD(B) ;TO THE TABLE
JRST .+1] ;GO SET SPEED ANYWAY
TTSSP5: IDPB A,C ;STORE THIS
MOVSI C,0(B) ;LINE TO LH OF C
MOVE A,B ;SAVE LINE
MOVE B,[.DFSPD,,.FEDLS] ;ARGS
CALL FIXARG ;GO FIX THINGS UP
MOVE D,[POINT ^D8,SNDALL]
MOVSI A,INTALL ;ARRANGE TO FREE BUFFER
HRR A,MSTRDT ;MASTER DTE
HRRI C,6 ;SIX BYTES OF ARG
CALL DTEQ ;GO DO THE REQUEST
JFCL ;WILL GO
TTSSP6: OKINT ;ALLOW INTS AGAIN
RET ;AND DONE
;NONPRIVILEGED USER TRIED TO SET REMOTE
TTSSP3: CALL INTALL ;FREE SEND ALL BUFFER
JRST TTSSP6 ;AND WRAP UP
;**;[2607] Add one line at TTSSP3: +2L JGZ 3-APR-82
ENDAV. ;[2607] END ACVAR
; SET/RETURN DEVICE NON-TERMINAL STATUS
TTSNT1: SKIPN FEFLG ;IN PRIMARY PROTOCOL?
RET ;NO. IGNORE IT THEN
STOR C,TTNTS,(B) ;SAVE NEW VALUE
MOVE D,C ;GET VALUE TO BE SET
MOVSI C,0(B) ;GET TTY # TO CHANGE
MOVE B,[.DFMSG,,.FEDLS] ;ARGS (FCN,,DEVICE)
CALL FIXARG ;FIX UP ARGS
MOVE A,MSTRDT ;MASTER DTE
CALL DTEQ ;DO THE REQUEST
JFCL ;WILL GO
RET ;AND DONE
;ENABLE/DISABLE XOFF RECOGNITION IN THE FRONT-END
RESCD
TTEXFA: SAVET ;SAVE REGISTERS
CALL STADYN
RET ;NOT IMPORTANT
JRST TTEXZ
TTEXF: SKIPN FEFLG ;CHECK FOR PRIMARY PROTOCOL
RET ;NO. IGNORE IT THEN
SAVET ;SAVE TEMPS
TTEXZ: SETZ T4,0 ;ASSUME CLEAR
OPSTR <SKIPE>,TT%PGM,TTFLGS(T2)
SETO T4,0 ;SET
DYNST ;GET STATIC TTY NUMBER
MOVSI T3,0(T2) ;GET TTY # TO SET/CLEAR
MOVE T2,[.DFXEN,,.FEDLS] ;ARGS (FCN,,DEVICE)
CALL FIXARG ;FIX UP ARGS
MOVE T1,MSTRDT ;MASTER DTE
CALL DTEQ ;DO THE REQUEST
JFCL ;FORGET IT
RET
SWAPCD
;TTMSG...
;CODE TO DO A SEND ALL FOR KL DTE20 CONFIGURATIONS
;TTMSSN FOR SINGLE LINE, TTMSAL FOR ALL LINES
TTMSSN: SKIPA
TTMSAL: SETOM B
SAVET
STKVAR <TTMSSV>
MOVEM B,TTMSSV
SKIPN FEFLG ;USING PRIMARY PROTOCOL?
JRST [ JUMPGE B,R
RETSKP]
HRLI B,.DFSTA ;ASSUME SEND ALL
SKIPL TTMSSV
HRLI B,.DFHSD ;NO. STRING DATA THEN
MOVSI A,DECSAL ;INTERRUPT LOCATION
HRR A,MSTRDT
HRL C,B ;THE LINE IF RELEVANT
HRRI B,.FEDLS ;THE LINE SCANNER
CALL FIXARG ;GO CHECK FOR CTY,ETC.
HRR C,TTMSCT ;THE COUNT
MOVE D,[POINT 8,SNDALL] ;THE POINTER
TXO C,DTBYTM ;FORCE BYTE MODE SEND
AOS SALCNT ;INCREMENT SENDALL COUNT
CALL DTEQ ;GO SCHEDULE THE REQUEST
JFCL
SKIPL B,TTMSSV
RET
RETSKP
RESCD
DECSAL: SOS SALCNT
RET
RESCD
; XON CODE
TTXON1: SKIPN FEFLG ;IN PRIMARY PROTOCOL?
JRST TTXON2 ;NO .SKIP THE MESSAGE THEN
MOVEI A,.DFXON ;FE XON FUNCTION
PUSH P,B ;SAVE ADDRESS OF DYNAMIC DATA
DYNST ;GET LINE NUMBER
CALL SNDFNC ;TELL FE TO RESTART
JFCL ;FORGET IT IT WILL COME AGAIN
POP P,B ;RESTORE ADDRESS OF DYNAMIC DATA
JRST TTXON2 ;ENTER COMMON CODE
;ROUTINE TO SEND XOFF OR XON TO THE FRONT END
;ACCEPTS: A/ FUNCTION TO SEND
; B/ LINE NUMBER
;RETURNS: +1 /COULD NOT SEND REQUEST
; +2/ REQUEST SENT
SNDFNC:
PUSH P,B ;SAVE LINE NUMBER
MOVSI C,0(B) ;PUT LINE NUMBER IN CORRECT PLACE
MOVSI B,0(A) ;FUNCTION CODE
HRRI B,.FEDLS ;ASSUME DLS
CALL FIXARG ;GO FIX UP THE ARGS
HLRZ D,C ;LINE NUMBER AS DATUM
SETZM C ;DIRECT
MOVE A,MSTRDT ;TO THE MASTER -11
CALL DTEQ ;QUEUE IT UP
JRST PB2 ;RESTORE AND RETURN BAD
POP P,B ;RESTORE LINE
RETSKP ;GIVE GOOD RETURN
;LINE IS ON RSX20F FRONT END
SNDXO2: CONSZ PI,1B<^D20+DLSCHN> ;AT DTE PI LEVEL?
JRST SNDXO1 ;YES. GO TO IT
NOSKD1 ;PREVENT SCHEDULER INTERRUPTS
CHNOFF DLSCHN ;AND DTE INTERRUPTS
SNDXO1: SETONE TTFXO,(B) ;SAY X-ON NEEDED
LOAD D,TTXCN,(B) ;GET COUNT OF XOFFS
AOS D ;UPDATE COUNT
STOR D,TTXCN,(B)
SOJN D,SNDXO3 ;RETURN IF NOT ZERO
MOVEI D,XOFFC ;THE CHARACTER
SKIPGE CHITAB(D) ;PARITY NEEDED?
TXO D,200 ;YES. APPLY IT
MOVE A,MSTRDT ;SEND TO THE MASTER
MOVSI C,0(B) ;LINE NUMBER
;**;[2875]CHANGE 1 LINE AT SNDXO1:+10L TAM 9-DEC-82
MOVE B,[.DFBKW,,.FEDLS] ;[2875]
CALL FIXARG ;FIX UP THE ARGS
CALL DTEQ ;GO SEND IT
JFCL ;IGNORE FAILURE
SNDXO3: CONSZ PI,1B<^D20+DLSCHN> ;AT DTE PI LEVEL?
RET ;YES. ALL DONE THEN
CHNON DLSCHN ;RESTORE THE CHANNEL
OKSKD1 ;AND THE SCHEDULER
RET ;AND DONE
;LINE IS ON RSX20F FRONT END. SEND XON ONLY IF LINE IS MARKED AS NEEDING
;ONE, AND IT HAS NOT STORED TOO MANY CHARACTERS IN EITHER ITS
;INPUT BUFFER OR TTBBUF
SNDXN2: JE TTFXO,(B),R ;IF NOT WAITING, RETURN
STKVAR <SNDXSV>
MOVEM B,SNDXSV ;SAVE THE LINE NUMBER
NOSKD1 ;PREVENT SCHEDULER INTERRUPTION
CHNOFF DLSCHN ;AND DTE INTERRUPTS
MOVE D,B ;SAVE LINE NUMBER
CALL STADYN ;GET ADDRESS OF DYNAMIC DATA
JRST SNDXN3 ;NOT ACTIVE. INPUT BUFFER CAN'T OVERFLOW
MOVEI A,MINXON ;LEVEL AT WHICH TO START AGAIN
CAMGE A,TTICT(B) ;IS INPUT BUFFER THIS FULL?
JRST SNDXN1 ;YES. DON'T SEND XON
MOVE B,SNDXSV ;GET LINE NUMBER
LOAD A,TTFBB,(B) ;GET NUMBER OF WORDS USED IN TTBBUF
CAIL A,MXBBC1 ;MORE THAN ALLOWED FOR ONE TERMINAL?
JRST SNDXN1 ;YES. DON'T SEND XON
;XON IS TO BE SENT. TELL DTE SERVICE
SNDXN3: MOVE B,SNDXSV ;TURN IT ON IF NOT ACTIVE.
SETZRO TTXCN,(B) ;ZERO XOFF COUNT
MOVE A,MSTRDT ;TO THE MASTER
MOVEI D,XONC ;THE CHARACTER
SKIPGE CHITAB(D) ;PARITY NEEDED?
TXO D,200 ;YES. APPLY IT
MOVSI C,0(B)
;**;[2875]CHANGE 1 LINE AT SNDXN3:+7L TAM 9-DEC-82
MOVE B,[.DFBKW,,.FEDLS] ;[2875]
CALL FIXARG
CALL DTEQ ;GO SEND THE BYTE
JRST SNDXN1 ;AND GIVE UP
MOVE B,SNDXSV ;GET LINE NUMBER
SETZRO TTFXO,(B) ;NO X-ON NEEDED NOW
SNDXN1: MOVE B,SNDXSV ;RESTORE LINE NUMBER
CHNON DLSCHN ;RESTORE DTE
OKSKD1 ;AND THE SHCEDULER
RET ;AND DONE
;THIS IS A FRONT END LINE
TTHU2: SAVET ;SAVE TEMPS
MOVE A,MSTRDT ;MASTER -11, NO INT
MOVS C,B
PUSH P,B ;SAVE LINE NUMBER
MOVE B,[.DFLHU,,.FEDLS] ;HANG UP THIS LINE
CALL FIXARG
HLRZ D,C
SETZ C,
CALL DTEQ ;REQUEST THE HANGUP
JRST [ POP P,B ;LINE NUMBER
MOVEI A,0(B) ;TO A AS WELL
HRLI A,DLSCXF ;HANGUP
SETONE TTCON,(B) ;SET CARRIER ON TO FORCE HANGUP
CALLRET BIGSTO] ;GO SCHEDULE THIS AGAIN
POP P,B ;RESTORE LINE NUMBER
RET ;AND DONE
;FRONT END LINE. TELL FRONT END TO STOP SENDING TO TERMINAL
TTCHI3: SAVET ;SAVE TEMPS
DYNST ;GET STAT ADDRESS
MOVEI A,.DFXOF ;TELL FE TO STOP
SKIPE FEFLG ;IN PRIMARY PROTOCOL?
CALL SNDFNC ;DO IT
JFCL ;IF FAILED, DON'T TELL HIM
RET
;LINE IS ON THE RSX20F FRONT END. LIMIT ITS STORAGE IN TTBBUF
BIGST2: LOAD C,TTFBB,(B) ;GET COUNT OF CHARACTERS IN TTBBUF
AOS C ;INCREASE IT
CAIL C,MAXABC ;BEYOND BAD GUY CUTOFF?
JRST STPLNF ;STOP LINE
CAIG C,2 ;CHECK FOR 2 IN BUFFER
JRST BIGST4 ;NO NOT THIS TIME
SKIPG TTACTL(T2) ;YES CHECK TO SEE IF ACTIVE
JRST STPLNF ;NO SHUT LINE DOWN IT IS ANOYING ME
BIGST4: STOR C,TTFBB,(B) ;UPDATE COUNT OF CHARACTERS IN TTBBUF
CAIGE C,MAXBBC ;MANY CHARS FOR THIS LINE?
JRST BIGST1 ;NO, CONTINUE
MOVE C,TTBIGC ;YES, BIGBUF GETTING FULL TOO?
CAIL C,TTBSIZ/2
CALL SNDXOF ;YES, SEND XOF
JRST BIGST1
STPLNF: CALL SNDXOF ;TURN LINE OFF
JN TTIME,(B),R ;IF LINE ALREADY QUEUED, GO ON
PUSH P,B ;SAVE LINE NUMBER
MOVSI C,0(B) ;THE LINE
MOVE B,[.DFTOL,,.FEDLS]
MOVE A,MSTRDT ;TO THE MASTER
MOVEI D,.DFTLO ;TURN IT OFF
CALL FIXARG
CALL DTEQ ;OUTPUT IT
JRST PB2 ;RESTORE AND RETURN
POP P,B ;RESTORE LINE NUMBER
MOVE C,[TTTOBL] ;C/THE ROUTINE TO CALL
CALLRET TTQAD1 ;GO Q IT UP AND LOSE DATUM
;LINE IS ON RSX20F STORE THE CHARACTER IN TTBBUF
;THIS CODE IS USED TO START UP A LINE TRANSFER VIA THE DTE20.
TTSND1: SKIPN FEFLG ;USING PRIMARY PROTOCOL?
JRST [ MOVEI A,0(C) ;NO
PUSH P,B ;SAVE ADDRESS OF DYNAMIC DATA
DYNST ;GET LINE NUMBER
CALL DTECHO ;OUTPUT VIA SECONDARY
JRST [ POP P,B
RET]
POP P,B
SETONE TTOTP,(B) ;INDICATE LINE IS ACTIVE
RET] ;AND DONE
MOVEI D,0(C) ;THE CHARACTER
SETONE TTOTP,(B) ;SAY LINE IS ACTIVE
INCR TTFCT,(B) ;INCREASE COUNT OF BYTES IN -11
PUSH P,B ;SAVE ADDRESS OF DYNAMIC DATA
DYNST ;GET LINE NUMBER
SETONE TTFPK,(B) ;SAY WAITING FOR TO -11 DONE
MOVSI C,0(B) ;LINE NUMBER
MOVE B,[.DFHLC,,.FEDLS] ;ARGS
CALL FIXARG ;GET PROPER ARGS
PUSH P,F
SETZ F, ;JUST IN CASE
CALL DTSNGL ;GO DO A SINGLE REQUEST
JRST [ POP P,F ;FAILED. RESTORE FLAGS
POP P,B ;RESTORE ADDRESS OF DYNAMIC DATA
DECR TTFCT,(B) ;DECREMENT BYTES IN -11
MOVNI C,1 ;BACK UP BUFFER
ADJBP C,TTOOUT(B)
MOVEM C,TTOOUT(B) ;RESTORE IT
AOS TTOCT(B) ;UP COUNT
JRST INTRST] ;GO SCHEDULE RETRY
POP P,F ;RESTORE FLAGS
POP P,B ;ADDRESS OF DYNAMIC BLOCK
RET ;AND DONE
;TTTOBL - ROUTINE CALLED FROM SCHEDULER TO TURN ON LINE AGAIN
;ACCEPTS:
; T2/ INTERNAL LINE NUMBER
TTTOBL: MOVE A,MSTRDT ;TO THE MASTER
PUSH P,B ;SAVE LINE NUMBER
MOVSI C,0(B)
MOVE B,[.DFTOL,,.FEDLS]
MOVEI D,.DFTOO ;TURN IT ON
CALL FIXARG ;FIX UP ARGS
CALL DTEQ ;QUEUE IT
JRST [ POP P,B
MOVE C,[TTTOBL] ;MUST TRY AGAIN
CALLRET TTQAD1] ;ARRANGE FOR IT
POP P,B ;RESTORE LINE NUMBER
CALLRET SNDXON ;ASSUME AN X-ON IS NEEDED
; ENABLE/DISABLE TTY'S
FEDABL: SETZ C,0 ;SET LINE # (ALL)
MOVE A,MSTRDT ;GET ID OF MASTER
MOVE B,[.DFEDR,,.FEDH1] ;ENABLE/DISABLE DATASETS
CALL DTEQ
JFCL
RET
SUBTTL FRONT-END TERMINAL HANDLING
RESCD ;MUST BE RESIDENT
;THIS ROUTINE IS CALLED FROM THE DTE20 INTERRUPT ROUITNE TO COMPLETE
;A TTY OUTPUT REQUEST. INPUT IS:
; A/ UNIQUE CODE (SEE BELOW)
; B/UNIT NUMBER
; C/DEVICE CODE
;UNIQUE CODE IS
; (0,,COUNT)
;WHERE COUNT IS THE NUMBER OF CHARACTERS SENT TO THE 11 IN SOME CALL TO
; DTEQ THAT SPECIFIED TTYINT AS ITS RETURN ADDRESS
; IF COUNT IS 0, THIS WAS A SINGLE CHARACTER (DTSNGL WAS CALLED)
; AND BUFFER COUNTS HAVE ALREADY BEEN UPDATED
; IF COUNT IS NON-ZERO, THIS WAS MULTIPLE CHARACTERS, AND THE BUFFER
; COUNT MUST BE UPDATED
;AT THIS POINT, THE CHARACTERS HAVE BEEN SENT TO THE 11 BUT NOT ACKNOWLEDGED
TTYINT::PUSH P,A ;SAVE UNIQUE CODE
MOVE A,C ;MOVE DEVICE TO A
CALL GETLIN ;GET PROPER CODE
JRST [ POP P,A ;RESTORE CODE
RET] ;AND GIVE UP
SETZRO TTFPK,(B) ;CLEAR WAITING FOR -11
POP P,A ;GET BACK UNIQUE CODE
CALL STADYN ;GET ADDRESS OF DYNAMIC DATA
JRST [ JUMPLE T2,R ;RETURN IF BECOMING ACTIVE OR INACTIVE
JE TTMES,(T2),R ;RETURN IF NOT A TTEMES BLOCK
JRST .+1] ;CONTINUE IF TTEMES BLOCK
;MULTIPLE CHARACTERS WERE SENT. UPDATE COUNT OF CHARACTERS IN OUTPUT
;BUFFER
JUMPE A,TTYIN1 ;HAVE A CODE?
MOVEI C,0(A) ;NUMBER OF CHARACTERS SENT
SUB C,TTOCT(B) ;COMPUTE NEW COUNT OF CHARACTERS IN BUFFER
SKIPG C ;IF COUNT WENT NEGATIVE, DON'T STORE IT
MOVNM C,TTOCT(B) ;STORE NEW COUNT
CALL CHKWRN ;SEE IF FORK WAKEUP NEEDED
TTYIN1: MOVEI C,0(A) ;GET COUNT AGAIN
LOAD D,TTFCT,(B) ;FRONT END CHARACTER COUNT
ADDI D,0(C) ;ADD CHARACTERS JUST SENT
STOR D,TTFCT,(B) ;NEW COUNT
LOAD C,TTFMC,(B) ;GET LINE'S ALLOCATION
CAIL D,0(C) ;ROOM FOR MORE?
JRST [ SETONE TTFOW,(B) ;SAY LINE IS WAITING FOR UNBLOCK
RET] ;AND GO DISMISS THIS INTERRUPT
;T2/ ADDRESS OF DYNAMIC DATA
TTYIN2: JN TTSFG,(T2),[SETZRO TTOTP,(T2) ;IF CTRL/S WAS TYPED, CLEAR
RET] ; OUTPUT ACTIVE
SETONE TTOTP,(B) ;MAKE SURE THIS IS ON
SKIPE C,TTOCT(B) ;ANY OUTPUT CHARACTERS?
JRST TTYIN3 ;YES. DO THEM
SETZRO TTOTP,(T2) ;NO. CLEAR OUTPUT ACTIVE
CALLRET CLENUP ;CLEAN UP AND RETURN
;TTYINT..
;CHARACTERS ARE IN OUTPUT BUFFER. CALL TTSND IF THERE IS ONLY ONE.
;OTHERWISE CALL DTEQ TO SEND THEM ALL
TTYIN3: STKVAR <TTYVR1,TTYVR2> ;GET SOME SAVE CELLS
MOVE C,TTOOUT(B) ;GET POINTER
HRRZ A,C
TDNN C,WRPMSK ;NEED TO ADVANCE?
HRR C,1-TTSIZ(A) ;YES. DO IT
MOVE A,TTOCT(B) ;GET OUTPUT COUNT
CALL CNTSET ;GO ADJUST COUNT
MOVEM C,TTYVR1 ;SAVE STARTING BYTE POINTER
CALL FNDEND ;GO GET CHARACTERS
MOVE D,TTYVR1 ;GET BACK ORIGINAL BYTE POINTER
TRNN A,777776 ;AT LEAST TWO?
CALLRET TTSND ;NO. GO DO SINGLE CHARACTER
MOVEM C,TTOOUT(B) ;NEW OUTPUT POINTER
SETZ F, ;OUTPUT BUFFER
HRR F,A ;GET COUNT OF BYTES FOUND
MOVSI A,TTYINT ;IT'S TTY
HRR A,MSTRDT ;TO THE MASTER
MOVEM B,TTYVR2 ;SAVE ADDRESS OF DYNAMIC DATA
DYNST ;GET LINE NUMBER
SETONE TTFPK,(B) ;WAITING FRO TO -11 DONE
MOVS C,B ;LINE NUMBER
HRR C,F ;COUNT
MOVE B,[.DFHSD,,.FEDLS] ;STRING DATA
CALL FIXARG ;FIX UP THE ARGS
CALL DTEQ ;QUEUE THE REQUEST
JRST RSCHED ;GO DO RESCHEDULE
RET ;GO DISMISS THE INTERRUPT
;DTEQ FAILED. RESTORE COUNTS AND ARRANGE FOR SCHEDULER TO RESTART OUTPUT
RSCHED: MOVE B,TTYVR2 ;ADDRSS OF DYNAMIC DATA
MOVE D,TTYVR1 ;GET ORIGINAL BYTE POINTER
MOVEM D,TTOOUT(B) ;RESTORE OUTPUT BYTE POINTER
INTRST: DYNST ;B/ LINE NUMBER
SETZRO TTFPK,(B) ;NOT WAITING FOR PACKET
SETZ A, ;A/ TIME UNTIL EVENT
MOVE C,[TTSN10] ;START UP AS SINGLE CHARACTER
CALLRET TTQAD ;GO DO IT
;CNTSET - ROUTINE TO FIGURE OUT MAX COUNT ALLOWED IN STRING DATA FUNCTION
;INPUT: A/ TTY BUFFER COUNT
; B/ ADDRESS OF DYNAMIC DATA
;RETURNS +1 ALWAYS WITH: A/-MAX COUNT,,0
CNTSET: SAVEQ ;GET SOME WORK REGISTERS
LOAD Q1,TTFMC,(B) ;MAX ALLOCATION
LOAD Q2,TTFCT,(B) ;CURRENT FRONT END COUNT
SUBI Q1,0(Q2) ;COUNT ALLOWED TO SEND
CAILE A,0(Q1) ;CAN DO ALL?
MOVEI A,0(Q1) ;NO. SET ALLOCATION AS BYTE COUNT
MOVNI A,0(A) ;FOR AOBJN
MOVSI A,0(A) ;TO THE LEFT HALF
RET ;AND DONE
;FNDEND - FIND END OF MESSAGE TO SEND TO TERMINAL
;ACCEPTS:
; T1/ AOBJN POINTER TO STEP THROUGH OUTPUT BUFFER
; T3/ POINTER FOR REMOVING CHARACTERS FROM OUTPUT BUFFER
; CALL FNDEND
;RETURNS +1: ALWAYS,
; T3/ UPDATED POINTER TO OUTPUT BUFFER
FNDEND: TDNN C,WRPMSK ;TO THE NEXT?
RET ;YES. DONE FOR NOW
ILDB D,C ;GET NEXT BYTE
TRNE D,TTOESC ;ESCAPE CHARACTER?
JRST [ ADD C,[^D9B5] ;DECREMENT BYTE POINTER
TLNE C,(40B5) ;WENT INTO PREVIOUS WORD?
SUB C,[44B5+1] ;YES. CORRECT IT
RET] ;AND RETURN
AOBJN A,FNDEND ;NO. GET MORE
RET ;ALL EXHAUSTED
;ROUTINE TO SET SPEED OF LINE FROM VALUES SENT BY -11
;ACCEPTS:
; A/ DEVICE CODE
; B/ UNIT NUMBER
; C/ REMOTE INDICATOR
; D/ INPUT,,OUTPUT
TTSPST::CALL GETLIN ;GET INTERNAL LINE NUMBER
RET ;INVALID
JUMPE C,TTSPS1 ;IF NOT REMOTE, JUMP OFF
SETONE TTFEM,(B) ;IS REMOTE
TRNN C,(1B3) ;IS IT AUTO ALSO?
JRST TTSPS1 ;NO.
SETONE TTAUT,(B) ;YES. SET INDICATOR
TTSPS1: MOVEM D,TTSPWD(B) ;STORE IT
RET ;AND DONE
;ROUTINE TO HANDLE SIGNAL FROM A FE THAT ITS LINE BUFFER FOR
;A GIVEN LINE IS EMPTY. ACCEPTS:
; A/ DEVICE CODE
; B/LINE NUMBER
TTYDON::JUMPL B,DONALL ;IF NEG HE WANTS TO ACK THEM ALL
CALL GETLIN
RET ;ILLEGAL LINE
JN TTFPK,(B),R ;IF TO -11 DONE PENDING, GO AWAY
CALL STADYN ;GET ADDRESS OF DYNAMIC DATA
JRST [ JUMPLE T2,R ;RETURN IF BECOMING ACTIVE OR INACTIVE
JE TTMES,(T2),R ;RETURN IF NOT A TTEMES BLOCK
JRST .+1] ;CONTINUE IF TTEMES BLOCK
SETZRO TTFCT,(B) ;CLEAR COUNT OF BYTES IN -11
JE TTFOW,(B),R ;IS THIS LINE WAITING FOR THIS INT?
SETZRO TTFOW,(B) ;YES. CLEAR WAIT CONDITION
CALLRET TTYIN2 ;CONTINUE OUTPUT TO THE LINE
;HERE WHEN FRONT END IS ACKING ALL UNITS
DONALL: STKVAR <SAVEE>
MOVSI C,NTTFE ;NUMBER OF FRONT END LINES
MOVNS C ;MAKE AOBJN POINTER
DONAL1: MOVEM C,SAVEE ;SAVE AOBJN POINTER
MOVEI B,0(C) ;B/LINE NUMBER
MOVEI A,.FEDLS ;ALL LINES ARE DLS
CALL TTYDON ;GO ACK THIS GUY
MOVE C,SAVEE
AOBJN C,DONAL1 ;DO ALL LINES
MOVE B,CTYLNO ;GET CTY LINE NUMBER
LOAD C,TTSTY,(B) ;GET LINE TYPE
CAIE C,TT.FE ;FRONT END LINE?
RET ;NO. DON'T ACK IT
SKIPGE B,CTYUNT ;B/UNIT NUMBER FOR CTY
RET ;NOT SET UP YET
MOVEI A,.FEDLS ;A/ DEVICE .FEDLS
CALLRET TTYDON ;GO ACK THE LINE
;ROUTINE TO HANDLE A DIAL UP SIGNAL FROM THE FE
; A/DEVICE CODE
; B/LINE NUMBER
TTYDLU::CALL GETLIN ;GET PROPER LINE NUMBER
RET ;ILLEGAL LINE
MOVSI A,0(B) ;LINE NUMBER TO LH
HRRI A,DLSCXF+CARONB ;INDICATE CARRIER ON
CALLRET BIGSTO ;PUT IT IN BUFFER
;ROUTINE TO HANDLE HANG UP SIGNAL FROM FE
; A/DEVICE CODE
; B/LINE NUMBER
TTYHGU::CALL GETLIN ;GET LINE NUMBER
RET ;ILLEAGAL LINE
MOVSI A,0(B) ;TO LH
HRRI A,DLSCXF ;CARRIER TRANSITION
CALLRET BIGSTO ;STORE IT
;DEFINE THE PROTOCOL TRANSFER VECTOR
TTYDTV::0 ;NO STRING DATA
TTYDON ;ACK
0 ;NO STATUS
TTYSLA ;SET LINE ALLOCATION
R ;NO ERROR REPORTING
TTDTRM ;DETACH REMOTES ON RELOAD
;THIS ROUTINE IS CALLED FROM THE DTE INTERRUPT ROUTINE TO SET
;THE LINE ALLOCATION FOR A TTY LINE. ACCEPTS:
; 1/ DEVICE CODE
; 2/ ALLOCATION
; 3/ LINE NUMBER
TTYSLA::EXCH B,C ;GET ARGS IN PROPER PLACES
CALL GETLIN ;GET INTERNAL LINE NUMBER
RET ;ILLEGAL LINE
STOR C,TSFMC,(B) ;STORE NEW ALLOCATION
RET ;AND DONE
;IDCTY - IDENTIFY THE CTY
;ACCEPTS:
; T2/ UNIT NUMBER FOR THE CTY AS KNOWN BY THE FRONT END
; CALL IDCTY
;RETURNS +1: ALWAYS
;CALLED FROM DTE SERVICE WHEN THE FRONT END SENDS OVER THE UNIT NUMBER
;WITHIN THE .FEDLS DEVICE THAT IT KNOWS AS THE CTY. STORES:
;CTYUNT/ THE UNIT NUMBER
;CTYINT/ THE INTERNAL EQUIVALENT OF THAT (INTERNAL LINE NUMBER)
;THE CTY SHOULD ALWAYS BE ADDRESSED INTERNALLY BY CTYLNO, WHICH IS
;SET UP BY TTINIT. CTYINT WILL CONTAIN THE INTERNAL
;EQUIVALENT OF THE LINE ON WHICH THE CTY IS PHYSICALLY LOCATED FOR THIS
;MONITOR LOAD. ADDRESSING THE LINE BY THIS NUMBER IS AN ERROR.
;IF CTYINT=CTYLNO, CTYINT IS SET TO -1 SO THAT NO LINE NUMBER WILL
;EVER MATCH IT
IDCTY:: SAVET
PUSH P,T2 ;SAVE UNIT NUMBER
SETOM CTYUNT ;INDICATE CTY NOT KNOWN FOR GETLIN
MOVEI T1,.FEDLS ;T1/DEVICE
CALL GETLIN ;GET THE INTERNAL EQUIVALENT
RET ;NOT A FRONT END LINE
CAME T2,CTYLNO ;IS THIS ITS VALID INTERNAL LINE NUMBER?
MOVEM T2,CTYINT ;NO. SAVE THIS AS ITS ALIAS
POP P,CTYUNT ;SET UNIT NUMBER FOR CTY
RET
;GETLIN - ROUTINE TO CONVERT DEVICE/LINE TO INTERNAL LINE NUMBER
;ACCEPTS:
; A/DEVICE CODE (ONLY .FECTY OR .FEDLS)
; B/LINE NUMBER
;RETURNS +1: FAILURE
; +2: SUCCESS,
; T2/INTERNAL LINE NUMBER
;DOES NOT CLOBBER ANY REGISTERS EXCEPT B
GETLIN: ACVAR <W1> ;GET A WORK REGISTER
CAIN A,.FECTY ;THE CTY?
JRST [ MOVE B,CTYLNO ;YES. USE INTERNAL NUMBER OF CTY
RETSKP] ;AND RETURN WITH GOOD LINE
;THE DEVICE MUST BE .FEDLS
CAMN B,CTYUNT ;THE UNIT NUMBER FOR THE CTY?
JRST [ MOVE B,CTYLNO ;YES. GET INTERNAL LINE NUMBER FOR CTY
RETSKP]
CAIL B,NTTFE ;IS THE UNIT NUMBER WITHIN THE NUMBER
; OF FRONT END LINES THAT WE KNOW ABOUT?
RET ;NO. CAN'T BE A FRONT END LINE
JUMPE B,GETLN1 ;IF THE DL11, SKIP BIAS
SUBI B,SPCLIN ;BIAS THE LINE
SKIPG B ;NOW A GOOD T/S LINE NUMBER?
ADDI B,NTTFE-1 ;NO. WAS A SPECIAL. TRANSLATE THE LINE #
GETLN1: MOVE W1,TTLINV+TT.FE ;YES. GET INTERNAL LINE NUMBER FOR FIRST
ADD B,TT1LIN(W1) ; FRONT END LINE. COMPUTE FOR THIS LINE
RETSKP ;RETURN SUCCESS
;**;[2607] Add one line at GETLN1: +3L JGZ 3-APR-82
ENDAV. ;[2607] END ACVAR
;FIXARG - ROUTINE TO DETERMINE PROPER DEVICE/LINE NUMBER FOR LINE ON RSX20F
;FRONT END
;ACCEPTS: RH B/ DEVICE (ONLY .FEDLS)
; LH C/ INTERNAL LINE NUMBER
; CALL FIXARG
;RETURNS +1: ALWAYS,
; RH B/ DEVICE AS KNOWN BY THE FRONT END
; LH C/ UNIT AS KNOWN BY FRONT END
;CALLED IN PREPARATION FOR CALLING DTE SERVICE. LINE IS ASSUMED TO
;BE ON THE FRONT END
;NOTE: IF CALLED WITH -1, RETURNS IMMEDIATELY. THIS IS BECAUSE OF A
;FRONT-END BUG THAT REQUIRES RECEIVING -1 ON A SENDALL
FIXARG: ACVAR <W1,W2> ;GET SOME WORK REGISTERS
JUMPL C,R ;IF UNIT .LE. 0, NO CHANGE
HLRZ W1,C ;GET INTERNAL LINE NUMBER
CAMN W1,CTYLNO ;THE CTY?
JRST [ HRRI B,.FECTY ;YES. USE THE CTY
HRLI C,0 ;AND UNIT 0
RET]
MOVE W2,TTLINV+TT.FE ;GET LINE TYPE VECTOR TABLE
SUB W1,TT1LIN(W2) ;GET LINE NUMBER WITHIN TYPE
JUMPE W1,FIXAR1 ;IF THE DL11, ALL DONE
ADDI W1,SPCLIN ;NOT. BIAS THE LINE NUMBER
CAILE W1,NTTFE-1 ;A VALID T/S LINE?
SUBI W1,NTTFE-1 ;NO. ONE OF THE SPECIALS THEN
FIXAR1: HRL C,W1 ;RETURN IT IN LH OF C
RET ;AND DONE
;**;[2607] Add one line at FIXAR1: +2L JGZ 3-APR-82
ENDAV. ;[2607] END ACVAR
;DTESTO - ROUTINE TO STORE A CHARACTER IN TTBBUF. CALLED AT INTERRUPT LEVEL
;FROM DTE SERVICE. DATA IS ALWAYS A CHARACTER AT THIS POINT.
;ACCEPTS:
; T1/CHARACTER IN 8 BITS
; T2/(0,, PHYSICAL LINE NUMBER)
; T3/DEVICE TYPE
;RETURNS +1: ALWAYS
DTESTO::EXCH C,A ;TYPE TO A, CHAR TO C
CALL GETLIN ;GET INTERNAL LINE NUMBER FOR THIS LINE
RET ;LINE NOT ON FRONT END
MOVE A,C ;RESTORE CHARACTER
CALLRET TTICNT ;GO STORE CHARACTER
;DEVICE DEPENDENT CODE FOR DOBE
TTDBEF: JN TTFCT,(2),RSKP ;IF BYTE IN FRONT END, GO DISMISS
RET
;DEVICE DEPENDENT CODE FOR SOBE
TTSBEF: LOAD T1,TTFCT,(2) ;GET FE CHARACTER COUNT
ADD 1,TTOCT(2) ;ADD IN BYTES STILL IN -10 MEMORY
OPSTR <SKIPN>,TTOTP,(2) ;NOW INACTIVE?
SKIPLE 1 ;EMPTY?
RET ;NO. NOT EMPTY THEN
RETSKP ;EMPTY
;DEVICE DEPENDENT CODE FOR WAKE UP ON OUTPUT BUFFER EMPTY
TTOBEF: OPSTR <SKIPN>,TTFCT,(T2) ;CHARACTERS IN FRONT END?
JRST TTOBE1 ; NO. GO MAKE THE REST OF THE CHECKS
JRST 0(4) ;YES DON'T WAKE UP
;DEVICE DEPENDENT CODE FOR INIALIZING DYNAMIC STORAGE
TTSETF: LOAD T3,TSFMC,(T2) ;GET FRONT END CHARACTER LIMIT FROM DYNAMIC
STOR T3,TTFMC,(T1) ; AND COPY TO DYNAMIC
JRST TTSET1 ;GO DO THE REST OF THE INITILIZATION
;ROUTINE CALLED FROM PROTOCOL HANDLER TO DETACH ALL REMOTE JOBS FOR
;A GIVEN DTE. ACCEPTS:
; A/ DTE NUMBER (NOT USED)
;RETURNS +1 ALWAYS
SWAPCD ;IS SWAPPABLE
TTDTRM: CAME A,MSTRDT ;IS THIS FOR THE MASTER DTE?
RET ;NO. DON'T DO ANYTHING THEN
SAVET ;SAVE ALL TEMP REGISTERS
MOVSI B,NTTFE ;NUMBER OF FE LINES
MOVNS B ;SET UP AOBJN POINTER
MOVE A,TTLINV+TT.FE ;GET NUMBER OF FIRST LINE OF THE TYPE TT.FE
HRR B,TT1LIN(A) ;START WITH FIRST LINE AND LOOP THROUGH ALL
TTDTR1: OPSTR <SKIPE>,TTFEM,(B) ;IS THIS LINE REMOTE?
CALL TTJBDT ;YES. DETACH IT THEN
AOBJN B,TTDTR1 ; DO ALL LINES
MOVEI A,.SFRMT ;SEE IF REMOTE LOGINS NOW ALLOWED
TMON ;GET VALUE
XCT [ CALL DTRMDS ;NOW DISALLOWED
CALL DTRMEN](B) ;NOW ALLOWED
RET ;AND DONE
;ROUTINE TO DEFINE THE DL11W PSEUDO-CTY'S.
;PRIMARY PROTOCOL MUST BE RUNNING
DFNDL1::ACVAR <W1> ;GET A WORK REG
STKVAR <<DFNDLS,2>,<DFNDS1,1>> ;A STRING
MOVE T2,[ASCII /TTY/] ;GET BASE STRING
MOVEM T2,DFNDLS ;SAVE IT
MOVE T2,[ASCIZ /DL0/] ;GET DEFINITION STRING
MOVEM T2,DFNDS1 ;SAVE IT
MOVE W1,[-<SPCLIN-1>,,SPCLIN-2] ;THE LINES TO DO
DFNDLL: HRRZ T2,W1 ;GET LINE NUMBER
MOVEI T1,.FEDLS ;FOR THE DLS DEVICE
CALL GETLIN ;GET ITS INTERNAL NUMBER
JRST DFNDLE ;?
SETONE TTIGI,(T2) ;SET IGNORE
MOVEI T1,DFNDLS ;GET ADDRESS OF BYTE ARRAY
HRLI T1,(<POINT 7,0,20>) ;MAKE IT A STRING POINTER
MOVEI T3,10 ;GET AN OCTAL NUMBER
NOUT ;PUT LINE NUMBER IN STRING
JFCL
MOVEI T3,":" ;GET TERMINATOR
IDPB T3,T1 ;STORE COLON
SETZM T3 ;GET A NULL
IDPB T3,T1 ;TIE OFF STRING
MOVX T1,<BYTE (7)0,0,1>
ADDM T1,DFNDS1 ;CHANGE LOGICAL NAME STRING
MOVEI T1,.TTDES(T2) ;GET DEVICE DESIGNATOR IN T1
MOVEI T2,.MOSNT ;SET NON-TERMINAL STATUS
MOVEI T3,.MOSMN ;SUPPRESS SYSTEM MESSAGES
MTOPR ;DO IT
ERJMP .+1 ;PROCEED IF IT FAILS
MOVX T1,.CLNSY ;CREATE SYSTEM LOGICAL NAME
HRROI T2,DFNDS1 ;THE LOGICAL NAME
HRROI T3,DFNDLS ;THE DEFINITION
CRLNM ;DO IT
DFNDLE: BUG (DLDEF)
AOBJN W1,DFNDLL ;DO THEM ALL
RET ;AND DOND
;**;[2607] Add one line at DFNDLE: +3L JGZ 3-APR-82
ENDAV. ;[2607] END ACVAR