.TITLE DCPDLC - DLC data base for DCP process
.IDENT /004140/
.ENABL LC
;+
;
;-
.MCALL DAT$
DAT$ COR
.WORD 0 ; Timer byte and flags
.BYTE 0 ; protocol state
.BYTE 0 ; control messages to send
.BYTE 0 ; reported state
.BYTE 0 ; device control flags
.BYTE 0 ; requested protocol state
.BYTE 0 ; control flags
.BYTE 0 ; Protocol
.BYTE 0 ; Not controller loopback
.BYTE 0 ; Duplex
.BYTE 0 ; External clock
.BYTE 0 ; Network Management line state
;
; Threshold counters
;
.ODD
.BYTE 0 ; Receiver threshold error counter
.BYTE 0 ; Transmit threshold error counter
.BYTE 0 ; Selection threshold error counter
;
; Data link counters
;
.WORD 0,0 ; Data bytes received
.WORD 0,0 ; Data bytes sent
.WORD 0,0 ; Data blocks received
.WORD 0,0 ; Data blocks sent
.WORD 0 ; Selection intervals elapsed
.WORD 0 ; Data errors outbound
.WORD 0 ; Data errors inbound
.WORD 0 ; Local buffer errors
.WORD 0 ; Remote buffer errors
.WORD 0 ; Selection timeouts
.BYTE 0 ; Local reply timeouts
.BYTE 0 ; Remote reply timeouts
;
; Station counters
;
.WORD 0 ; Remote process errors
.WORD 0 ; Local process errors
.BYTE 0 ; Header block check errors
.BYTE 0 ; Maintenance data block check errors
.BYTE 0 ; No. of last message received
.BYTE 0 ; No. of last message queued to transmitter
.BYTE 0 ; No. of last message returned from transmitter
.BYTE 0 ; No. of highest message returned
; from transmitter
.BYTE 0 ; No. of last acked transmitted message
.BYTE 0 ; No. of last acked message returned
.BYTE 0 ; Number of messages outstanding to the driver
.BYTE 0 ; NAK reason to be sent in NAK message
.BYTE 0 ; NMX PIX
.BYTE 0 ; KMC device priority
.EVEN
.WORD 0 ; KMC CSR address
.WORD 0 ; KMC interrupt vector address
.WORD 0 ; DUP CSR address
.WORD 3. ; SERVICE TIMER (default: 3 seconds)
.WORD 3. ; RETRANSMIT TIMER (default: 3 seconds)
LST$D ; Pretransmit queue
LST$D ; Waiting for acknowledge queue
.WORD 0 ; Function pending list
LIX$W ; Circuit logging entity identification
.WORD 0 ; Owner handle
.WORD 0 ; Transient error
.WORD 0 ; Persistent error
.WORD 0 ; Active buffers
LIX$W ; Line logging entity identification
LIX$W ; Driver process handle
.BYTE 0 ; Messages outstanding to the driver
.BYTE 3. ; Maximum data messages pending at the driver.
.EVEN
LST$D ; Line pre-transmit queue
; .WORD 0,0,0 ; Header word area
CHR$W UNT,<1,2,3> ; (initialization)
.BYTE 0 ; Babbling count
.BYTE 4. ; maximum transmits at one shot
.EVEN
END$ D.LEN
.END