Trailing-Edge
-
PDP-10 Archives
-
SRI_NIC_PERM_SRC_1_19910112
-
6-1-monitor/setspd.mac
There are 33 other files named setspd.mac in the archive. Click here to see a list.
;SRC:<6-1-MONITOR>SETSPD.MAC.2, 3-Jun-86 16:17:40, Edit by KNIGHT
; Map 19200 to 134 for the DH hack
; UPD ID= 79, SNARK:<6.1.UTILITIES>SETSPD.MAC.9, 13-Feb-85 16:26:29 by GLINDELL
; Maximum-buffer in DCNTA0 should be maximum-bufferS
; UPD ID= 55, SNARK:<6.1.UTILITIES>SETSPD.MAC.8, 6-Dec-84 16:29:17 by GLINDELL
;Check for and suppress NODX16 errors from NODE% jsys in DECNET/NODE command
; UPD ID= 47, SNARK:<6.1.UTILITIES>SETSPD.MAC.7, 17-Nov-84 16:18:03 by MELOHN
;TCO 6.1.1055 - Add LAT-STATE ON or OFF command. Sets LASDEF via SMON%
; UPD ID= 37, SNARK:<6.1.UTILITIES>SETSPD.MAC.6, 6-Nov-84 19:50:42 by TBOYLE
;Fix the TCO number on the previous edit.
; UPD ID= 36, SNARK:<6.1.UTILITIES>SETSPD.MAC.5, 2-Nov-84 19:27:12 by TBOYLE
;TCO 6.1.1034 - Changes to DMPRED, DMPMAP, add MAPSEC for multisection support.
; UPD ID= 34, SNARK:<6.1.UTILITIES>SETSPD.MAC.4, 2-Nov-84 12:23:40 by GLINDELL
;Change VMINOR to 1 since this is now a 6.1 specific SETSPD
; UPD ID= 612, SNARK:<6.UTILITIES>SETSPD.MAC.63, 18-Oct-84 14:44:54 by TBOYLE
;TCO 6.2253 (QAR 706284) wait for CI disks during dump processing.
; UPD ID= 611, SNARK:<6.UTILITIES>SETSPD.MAC.62, 17-Oct-84 16:22:59 by GRANT
;In DCARE, pick up unit from correct offset before doing the SMON%
; UPD ID= 608, SNARK:<6.UTILITIES>SETSPD.MAC.61, 14-Oct-84 14:34:39 by GLINDELL
;TCO 6.1.1006 - Add DECNET DEFAULT-FLOW-CONTROL command
; UPD ID= 587, SNARK:<6.UTILITIES>SETSPD.MAC.60, 21-Aug-84 13:34:14 by TBOYLE
;TCO 6.2187 (QAR 706128) At NXTUNT, initialize structure name and alias.
; UPD ID= 586, SNARK:<6.UTILITIES>SETSPD.MAC.58, 20-Aug-84 16:28:18 by TBOYLE
;TCO 6.2183 (QAR 706085) At STRMOU, if no DMP: return. Check structure
; returned by JFNS with STDEV to see if mounting needed. Fix T3 for JFNS.
; UPD ID= 583, SNARK:<6.UTILITIES>SETSPD.MAC.56, 14-Aug-84 14:50:35 by TBOYLE
;New SYSERR - prepare QUELOP for extended addresses in SEBQOU, SEBCDR.
; UPD ID= 582, SNARK:<6.UTILITIES>SETSPD.MAC.55, 14-Aug-84 14:31:48 by TBOYLE
;New SYSERR - Be able to read the new SYSERR blocks. SEBHED, SEBSIZ different.
; UPD ID= 581, SNARK:<6.UTILITIES>SETSPD.MAC.53, 10-Aug-84 18:07:09 by GROSSMAN
;Set minor version number to 0.
; UPD ID= 580, SNARK:<6.UTILITIES>SETSPD.MAC.52, 10-Aug-84 17:59:05 by GROSSMAN
;TCO 6.2170 - Fix ETHERNET <chan> DECNET command to let the monitor figure
;out the correct Ethernet address for a DECnet channel.
; UPD ID= 554, SNARK:<6.UTILITIES>SETSPD.MAC.51, 19-Jun-84 17:18:29 by MCLEAN
;ADD DON'T CARE LOGIC
; UPD ID= 547, SNARK:<6.UTILITIES>SETSPD.MAC.50, 8-Jun-84 11:21:43 by GLINDELL
;TCO 6.1.1006 - Add DECNET commands to provide initial parameters for DECnet
; UPD ID= 535, SNARK:<6.UTILITIES>SETSPD.MAC.49, 24-May-84 20:01:15 by GLINDELL
;TCO 6.1.1005 - Accept area number in DECnet node number
; UPD ID= 531, SNARK:<6.UTILITIES>SETSPD.MAC.48, 15-May-84 13:08:56 by TBOYLE
;REMOVE TCO 6.1637, SPEAR COUNTER STUFF. IT'S DONE IN SYSERR NOW.
; UPD ID= 519, SNARK:<6.UTILITIES>SETSPD.MAC.47, 17-Apr-84 10:37:43 by GROSSMAN
;TCO 6.2036 - Add ETHERNET command to set Ethernet address.
; UPD ID= 498, SNARK:<6.UTILITIES>SETSPD.MAC.45, 5-Mar-84 16:19:02 by MOSER
;MORE 6.1562 - READ SERIAL NUMBERS IN DECIMAL. FIX ERROR MESSAGE
; UPD ID= 492, SNARK:<6.UTILITIES>SETSPD.MAC.44, 29-Feb-84 17:59:09 by PRATT
;TCO 6.1956 - Add ENABLE/DISABLE FAST-LOGIN-OPTION
; UPD ID= 476, SNARK:<6.UTILITIES>SETSPD.MAC.43, 8-Feb-84 14:02:57 by TBOYLE
;More TCO 6.1934 Change 22 to ^D22 at SETCN1.
; UPD ID= 470, SNARK:<6.UTILITIES>SETSPD.MAC.42, 8-Feb-84 10:05:16 by EVANS
;Add flag to edit number so I VER will display it in decimal.
; UPD ID= 465, SNARK:<6.UTILITIES>SETSPD.MAC.41, 8-Feb-84 08:37:15 by MCINTEE
;Change NODNAM routine to set the node number first.
; UPD ID= 458, SNARK:<6.UTILITIES>SETSPD.MAC.40, 25-Jan-84 18:58:50 by MOSER
;STILL MORE 6.1562 - FIX A BUG
; UPD ID= 456, SNARK:<6.UTILITIES>SETSPD.MAC.39, 25-Jan-84 09:57:16 by MOSER
;FIX AN ERROR IN 6.1934 - SETSPD WON'T BUILD
; UPD ID= 449, SNARK:<6.UTILITIES>SETSPD.MAC.38, 23-Jan-84 17:27:13 by TBOYLE
;More TCO 6.1934 Cleanup GTJFN error messages.
; UPD ID= 446, SNARK:<6.UTILITIES>SETSPD.MAC.37 23-Jan-84 16:24:13 by TBOYLE
;TCO 6.1948 - Fix JSYER0 to output the actual error message
; UPD ID= 445, SNARK:<6.UTILITIES>SETSPD.MAC.36, 23-Jan-84 16:16:40 by MOSER
;TCO 6.1562 - CHANGE FORMAT OF ALLOW / RESTRICT
; UPD ID= 437, SNARK:<6.UTILITIES>SETSPD.MAC.34, 18-Jan-84 13:45:32 by PAETZOLD
;TCO 6.1941 - ENA/DIS HANGUP-IF-LOGGED-IN/OUT commands need alphabetical order.
;TCO 6.1938 - add support for ena/dir system-message-level-0/1 commands.
; UPD ID= 435, SNARK:<6.UTILITIES>SETSPD.MAC.33, 17-Jan-84 19:47:02 by TBOYLE
;TCO 6.1937 - ENA/DIS HANGUP-IF-LOGGED-IN/OUT code.
; UPD ID= 431, SNARK:<6.UTILITIES>SETSPD.MAC.32, 13-Jan-84 17:28:47 by TBOYLE
;TCO 6.1934 - At SETCNT determine a new SPRCNT from ERROR.SYS properly.
; UPD ID= 397, SNARK:<6.UTILITIES>SETSPD.MAC.31, 9-Dec-83 21:49:16 by MCLEAN
;WORK ON THE NEW INTERNAL ERROR FORMATS
;MISSING COUNTS SPEAR RUNNING COUNT
; UPD ID= 357, SNARK:<6.UTILITIES>SETSPD.MAC.30, 5-Oct-83 22:27:46 by MCLEAN
;TCO 6.1819 MAKE SEBHED 2 (NOTE THIS REALLY IS NOT A GOOD SYMBOL NAME)
; UPD ID= 352, SNARK:<6.UTILITIES>SETSPD.MAC.29, 21-Sep-83 14:28:11 by TGRADY
; TCO 6.1804. Don't mount the DMP: structure exclusively...
; UPD ID= 351, SNARK:<6.UTILITIES>SETSPD.MAC.28, 16-Sep-83 15:49:51 by MCLEAN
;PUT SEBHED BACK TO 4 WORDS SINCE JSYS HASN'T CHANGED
; UPD ID= 297, SNARK:<6.UTILITIES>SETSPD.MAC.27, 20-Jun-83 13:14:40 by MOSER
;TCO 6.1562 SERVICE, ALLOW, RESTRICT COMMANDS FOR MSCP SERVER
; UPD ID= 284, SNARK:<6.UTILITIES>SETSPD.MAC.26, 17-May-83 14:18:11 by LOMARTIRE
;TCO 6.1634 - Allow SETSPD to timeout if a command takes more than 30 sec.
; UPD ID= 282, SNARK:<6.UTILITIES>SETSPD.MAC.25, 11-May-83 15:17:06 by COBB
;TCO 6.1637 - Teach SETSPD to read the SPEAR counter from the dump and SMON% it
; UPD ID= 261, SNARK:<6.UTILITIES>SETSPD.MAC.24, 16-Apr-83 17:10:42 by PAETZOLD
;TCO 6.1616 - TCP Changes. Break the ARPANET HOST command.
; UPD ID= 206, SNARK:<6.UTILITIES>SETSPD.MAC.23, 9-Feb-83 14:02:18 by WEETON
; UPD ID= 135, SNARK:<6.UTILITIES>SETSPD.MAC.22, 23-Sep-82 16:01:00 by MOSER
;TCO 6.1278 - BLT CORRECT NUMBER OF WORDS AT SPEED:
; UPD ID= 123, SNARK:<6.UTILITIES>SETSPD.MAC.21, 1-Sep-82 14:34:02 by HAUDEL
;TCO 6.1241 - Close DUMP.CPY when error occurs so lost pages are not created.
; UPD ID= 110, SNARK:<6.UTILITIES>SETSPD.MAC.20, 4-Aug-82 13:43:19 by CDUNN
;TCO 6.1189 (Again) - Fix bug in STRMOU code. Now ERJMP to MSTR error routine
;so RET takes you back to CPYDMP instead of back into the MSTR routine.
;Makes not finding dump structure work.
; UPD ID= 102, SNARK:<6.UTILITIES>SETSPD.MAC.19, 26-Jul-82 00:27:32 by CDUNN
;Add a <CRLF> before the dismount of the dump structure. Makes CTY more
;readable...
; UPD ID= 101, SNARK:<6.UTILITIES>SETSPD.MAC.18, 19-Jul-82 22:29:56 by CDUNN
;TCO 6.1189 Teach CPYDMP to mount the structure implied by DMP:. Also
;dismount when done.
; UPD ID= 45, SNARK:<6.UTILITIES>SETSPD.MAC.17, 19-May-82 10:51:21 by MILLER
; UPD ID= 44, SNARK:<6.UTILITIES>SETSPD.MAC.16, 19-May-82 10:43:09 by MILLER
;TCO 6.1142. ADD ENABLE/DISABLE COMMANDS FOR SYSTEM ERROR MESSAGES
; UPD ID= 30, SNARK:<6.UTILITIES>SETSPD.MAC.15, 22-Feb-82 10:23:58 by MURPHY
;yet again
; UPD ID= 29, SNARK:<6.UTILITIES>SETSPD.MAC.14, 19-Feb-82 15:34:56 by MURPHY
;More of same.
; UPD ID= 28, SNARK:<6.UTILITIES>SETSPD.MAC.13, 18-Feb-82 17:24:52 by MURPHY
;TCO 6.1060 - Copy dumps to DMP: instead of PS:<SYSTEM>
; UPD ID= 21, SNARK:<6.UTILITIES>SETSPD.MAC.12, 17-Jan-82 19:13:45 by PAETZOLD
;TCO 5.1681 - fix the change command
; UPD ID= 9, SNARK:<6.UTILITIES>SETSPD.MAC.11, 2-Nov-81 09:58:21 by PAETZOLD
;TCO 6.1035 - Update version information for release 6
; UPD ID= 26, SNARK:<5.UTILITIES>SETSPD.MAC.10, 31-Aug-81 09:33:07 by PAETZOLD
;TCO 5.1461 - read and interpret MMAP when getting queued SYSERR blocks
; UPD ID= 18, SNARK:<5.UTILITIES>SETSPD.MAC.9, 3-Aug-81 12:51:24 by ZIMA
;TCO 5.1438 - Include Friday in "ALL" entry in day-of-week table.
; UPD ID= 8, SNARK:<5.UTILITIES>SETSPD.MAC.8, 20-Jul-81 15:54:57 by MOSER
;TCO 5.1424 CHANGE BACKGROUND COMMAND TO BATCH-BACKGROUND.
; UPD ID= 2311, SNARK:<5.UTILITIES>SETSPD.MAC.7, 8-Jul-81 15:23:12 by DONAHUE
;TCO 5.1401 - Add TU77 entry to SLAVT table
; UPD ID= 2100, SNARK:<5.UTILITIES>SETSPD.MAC.6, 28-May-81 11:55:31 by PAETZOLD
;TCO 5.1352 - Change error handler to not complain about invalid
;keywords when started at start4. This will prevent J0NRUN BUGHLT's
; UPD ID= 2070, SNARK:<5.UTILITIES>SETSPD.MAC.5, 24-May-81 15:35:52 by ZIMA
;TCO 5.1346 - EDIT 21 - pass proper MO%LCP setting on all subsequent LPINI
; calls for a unit.
; UPD ID= 1769, SNARK:<5.UTILITIES>SETSPD.MAC.4, 25-Mar-81 17:49:49 by GRANT
;Update Copyright
; UPD ID= 1367, SNARK:<5.UTILITIES>SETSPD.MAC.3, 18-Dec-80 10:25:34 by WACHS
;TCO 5.16 - ADD TM78 DEFINITION
; UPD ID= 524, SNARK:<5.UTILITIES>SETSPD.MAC.2, 15-May-80 13:33:16 by LYONS
;tco 5.1040 - Make release 5 look for 5-CONFIG.CMD
; UPD ID= 325, SNARK:<4.1.UTILITIES>SETSPD.MAC.5, 12-Mar-80 14:16:04 by OSMAN
;tco 4.1.1107 - Make release 4.1 look for 4-1-CONFIG.CMD
; UPD ID= 299, SNARK:<4.1.UTILITIES>SETSPD.MAC.3, 29-Feb-80 13:22:36 by OSMAN
;tco 4.1.1096 - Use COMND instead of TEXTI so as to allow "POLICY-PROGRAM"
; UPD ID= 102, SNARK:<4.1.UTILITIES>SETSPD.MAC.2, 6-Dec-79 11:05:53 by BLOUNT
;<4.1.UTILITIES>SETSPD.MAC.2, 6-Dec-79 10:55:56, EDIT BY BLOUNT
;TCO #4.2590 -CHANGE AT QUEDN1+7 TO FIX KS HALT STATUS BLOCK BUG
;<4.UTILITIES>SETSPD.MAC.44, 9-Oct-79 15:26:55, EDIT BY GRANT
;<4.UTILITIES>SETSPD.MAC.43, 25-May-79 13:02:47, EDIT BY MILLER
;FIX QUEBLK. IT WAS COMPUTING # OF PAGES TO DUMP OFF-BY-ONE
;<4.UTILITIES>SETSPD.MAC.42, 11-Apr-79 15:57:49, Edit by LCAMPBELL
; Fix up addressing of SYERR block at QUEDN1
;<4.UTILITIES>SETSPD.MAC.41, 13-Mar-79 08:50:11, EDIT BY KONEN
;UPDATE COPYRIGHT FOR RELEASE 4
;<4.UTILITIES>SETSPD.MAC.40, 13-Mar-79 06:50:04, EDIT BY R.ACE
;TAKE OUT TAPE-MOUNT-DEFAULT COMMAND
;ADD TAPE-RECOGNITION-ERRORS COMMAND
;<4.UTILITIES>SETSPD.MAC.39, 21-Feb-79 11:36:40, EDIT BY MURPHY
;ENABLE/DISABLE WORKING SET PRELOADING - DLM
;<4.UTILITIES>SETSPD.MAC.38, 20-Feb-79 17:43:04, EDIT BY BLOUNT
;CHANGE CLASS-SCHEDULER TO CLASS-SCHEDULING
;<4.UTILITIES>SETSPD.MAC.37, 19-Feb-79 14:22:43, Edit by MCLEAN
;FIX IT SO ECSKED WITH ARGUMENTS GIVES ERROR
;<4.UTILITIES>SETSPD.MAC.36, 19-Feb-79 13:24:27, Edit by MCLEAN
;CORRECT SPELLING OF WITHHELD
;<4.UTILITIES>SETSPD.MAC.35, 24-Jan-79 10:51:08, EDIT BY R.ACE
;MOVE TAPE-RECYCLE-PERIOD TO RIGHT PLACE, UPDATE EDIT#
;<4.UTILITIES>SETSPD.MAC.34, 11-Dec-78 06:52:19, EDIT BY R.ACE
;PUT ERJMP'S AFTER SYERR CALLS
;<4.UTILITIES>SETSPD.MAC.33, 28-Nov-78 08:04:16, EDIT BY R.ACE
;TCO 4.2098 - ADD TAPE-MOUNT-DEFAULT COMMAND
;ADD COMND JSYS ROUTINES FOR PARSING NEW SETSPD COMMANDS
;<ARC-DEC>SETSPD.MAC.3, 3-Oct-78 09:50:04, EDIT BY CALVIN
; Cause GTKEY to eat all of hypenated command name
;<ARC-DEC>SETSPD.MAC.1, 29-Sep-78 15:58:56, EDIT BY CALVIN
; Add ARCHIVE-TAPE-RECYCLE-PERIOD and TAPE-RECYCLE-PERIOD
;<4.UTILITIES>SETSPD.MAC.31, 20-Oct-78 19:16:54, EDIT BY MILLER
;<4.UTILITIES>SETSPD.MAC.30, 20-Oct-78 19:13:31, EDIT BY MILLER
;<4.UTILITIES>SETSPD.MAC.29, 20-Oct-78 19:12:53, EDIT BY MILLER
;TCO 4.2011. ADD BATCH-CLASS COMMAND
;<4.UTILITIES>SETSPD.MAC.28, 19-Oct-78 17:49:03, Edit by MCLEAN
;MAKE SKED JSYS BE SKED%
;<2MCLEAN>SETSPD.MAC.27, 24-Sep-78 21:56:05, Edit by MCLEAN
;<2MCLEAN>SETSPD.MAC.26, 21-Sep-78 21:22:18, Edit by MCLEAN
;<4.UTILITIES>SETSPD.MAC.25, 20-Sep-78 11:35:08, EDIT BY MILLER
;<4.UTILITIES>SETSPD.MAC.24, 19-Sep-78 12:57:51, EDIT BY MILLER
;<4.UTILITIES>SETSPD.MAC.23, 19-Sep-78 12:56:37, EDIT BY MILLER
;MORE OF TCO 4.2011
;<4.UTILITIES>SETSPD.MAC.22, 19-Sep-78 12:12:05, EDIT BY MILLER
;<4.UTILITIES>SETSPD.MAC.21, 19-Sep-78 12:10:50, EDIT BY MILLER
;TCO 4.2011. ADD ENABLE OPTIONS FOR CLASS SCHEDULER
;<4.UTILITIES>SETSPD.MAC.20, 19-Sep-78 11:27:50, EDIT BY MILLER
;<4.UTILITIES>SETSPD.MAC.19, 19-Sep-78 11:25:05, EDIT BY MILLER
;TCO 4.2011 AGAIN. ADD CREATE COMMAND
;<4.UTILITIES>SETSPD.MAC.18, 17-Sep-78 14:05:21, EDIT BY MILLER
;TCO 4.2011. IMPLEMENT "BATCH-BACKGROUND" COMMAND
;<4.UTILITIES>SETSPD.MAC.17, 24-Aug-78 12:07:17, EDIT BY R.ACE
;TCO 4.1993 - ADD COMMAND: ENABLE TAPE-DRIVE-ALLOCATION
;ADDED COMMENTING TO BEGINNING OF MODULE
;<R.ACE.LT>SETSPD.MAC.4, 23-Aug-78 16:44:38, EDIT BY R.ACE
;<R.ACE.LT>SETSPD.MAC.3, 23-Aug-78 13:19:33, EDIT BY R.ACE
;<R.ACE.LT>SETSPD.MAC.2, 23-Aug-78 12:12:30, EDIT BY R.ACE
;<2MCLEAN>SETSPD.MAC.17, 28-Jul-78 15:36:32, Edit by MCLEAN
;<3A.UTILITIES>SETSPD.MAC.16, 26-Jul-78 15:00:29, Edit by MCLEAN
;<4.UTILITIES>SETSPD.MAC.13, 18-Jul-78 14:10:12, EDIT BY MILLER
;CHANGE VERSION NUMBER TO 4
;<4.UTILITIES>SETSPD.MAC.12, 16-May-78 09:23:45, EDIT BY MILLER
;ADD MINOR VERSION TO CONFIG FILE NAME
;<4.UTILITIES>SETSPD.MAC.11, 6-May-78 22:17:11, Edit by MCLEAN
;<3A.UTILITIES>SETSPD.MAC.21, 4-Aug-78 13:13:02, Edit by MCLEAN
;<3A.UTILITIES>SETSPD.MAC.20, 4-Aug-78 13:11:23, Edit by MCLEAN
;<3A.UTILITIES>SETSPD.MAC.19, 3-Aug-78 17:12:20, Edit by MCLEAN
;<3A.UTILITIES>SETSPD.MAC.18, 28-Jul-78 15:33:15, Edit by MCLEAN
;<3A.UTILITIES>SETSPD.MAC.17, 27-Jul-78 14:41:21, EDIT BY MILLER
;INCREMENT EDIT NUMBER
;<3A.UTILITIES>SETSPD.MAC.16, 26-Jul-78 15:00:29, Edit by MCLEAN
;<3A.UTILITIES>SETSPD.MAC.15, 16-May-78 09:21:33, EDIT BY MILLER
;<3A.UTILITIES>SETSPD.MAC.14, 16-May-78 09:19:58, EDIT BY MILLER
;<3A.UTILITIES>SETSPD.MAC.13, 16-May-78 09:17:32, EDIT BY MILLER
;AND CHANGE VERSION TO 3A
;<3A.UTILITIES>SETSPD.MAC.12, 16-May-78 09:16:35, EDIT BY MILLER
;ADD MINOR VERSION TO CONFIG NAME
;<1MCLEAN>SETSPD.MAC.17, 4-May-78 18:31:02, Edit by MCLEAN
;<1MCLEAN>SETSPD.MAC.16, 4-May-78 18:24:33, Edit by MCLEAN
;<1MCLEAN>SETSPD.MAC.15, 4-May-78 17:37:31, Edit by MCLEAN
;<1MCLEAN>SETSPD.MAC.14, 4-May-78 17:22:55, Edit by MCLEAN
;<1MCLEAN>SETSPD.MAC.13, 4-May-78 17:22:03, Edit by MCLEAN
;<1MCLEAN>SETSPD.MAC.12, 4-May-78 16:22:12, Edit by MCLEAN
;<1MCLEAN>SETSPD.MAC.11, 4-May-78 16:16:56, Edit by MCLEAN
;TCO 1880 ADD SLAVE TYPES TO MTALN JSYS
;<4.UTILITIES>SETSPD.MAC.9, 9-Apr-78 13:24:57, EDIT BY MILLER
;MERGE IN CHANGES TO NODE COMMAND FROM 3A SOURCE
;<4.UTILITIES>SETSPD.MAC.8, 7-Apr-78 00:40:43, Edit by MCLEAN
;<3A.UTILITIES>SETSPD.MAC.9, 7-Apr-78 00:15:05, Edit by MCLEAN
;<3A.UTILITIES>SETSPD.MAC.8, 7-Apr-78 00:13:21, Edit by MCLEAN
;<3A.UTILITIES>SETSPD.MAC.7, 7-Apr-78 00:07:24, Edit by MCLEAN
;ADD HSB (HALT STATUS BLOCK) FOR KS10
;<4.UTILITIES>SETSPD.MAC.5, 2-Mar-78 15:04:19, Edit by PORCHER
;<4.UTILITIES>SETSPD.MAC.4, 28-Feb-78 14:35:36, Edit by PORCHER
;<4.UTILITIES>SETSPD.MAC.3, 28-Feb-78 14:25:25, Edit by PORCHER
;ADD "CHANGE" COMMAND FOR ACCOUNTING SHIFT CHANGES
;<4.UTILITIES>SETSPD.MAC.2, 31-Jan-78 00:41:13, Edit by MCLEAN
;MAGTAPE ONLINE ENTRY VECTOR UPDATES
;<4.UTILITIES>SETSPD.MAC.2, 16-Dec-77 14:01:29, EDIT BY MILLER
;<4.UTILITIES>SETSPD.MAC.1, 16-Dec-77 13:56:02, EDIT BY MILLER
;TCO 1879. ADD NODE COMMAND
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY ONLY BE USED
; OR COPIED IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
;COPYRIGHT (C) 1976,1977,1978,1979,1980,1981 BY DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
SEARCH MONSYM,MACSYM,SERCOD,CMD
.REQUIRE SYS:MACREL,SYS:CMD
TITLE SETSPD
SALL
.DIRECTIVE FLBLST ;SUPPRESS LENGTHY BINARY EXPANSIONS
; VERSION NUMBER DEFINITIONS
VMAJOR==6 ;MAJOR VERSION OF SETSPD
VMINOR==1 ;MINOR VERSION NUMBER
VEDIT==1VI%DEC+^D22 ;EDIT NUMBER
VWHO==0 ;GROUP WHO LAST EDITED PROGRAM (0=DEC DEVELOPMENT)
VSTSPD== <VWHO>B2+<VMAJOR>B11+<VMINOR>B17+VEDIT
; THIS PROGRAM IS RUN BY JOB 0 TO PERFORM VARIOUS USER-MODE
; FUNCTIONS THAT AFFECT THE OPERATION OF THE SYSTEM
; DEPENDING UPON THE DESIRED ACTION, THE PROGRAM IS STARTED AT
; ONE OF SEVERAL POSITIONS IN ITS ENTRY VECTOR.
; POS DESCRIPTION
; --- --------
;
; 0 CALLED ONCE DURING SYSTEM STARTUP BY RUNDD ROUTINE IN MEXEC.
; READS FILE "SYSTEM:x-CONFIG.CMD" FOR COMMANDS:
; CHANGE - set accounting shift change times
; DEFINE - define system-wide logical names
; ENABLE/DISABLE account validation
; ENABLE/DISABLE directory-parameter setting by non-priv users
; ENABLE/DISABLE use of hardware disk optimization feature
; ENABLE/DISABLE magtape drive assignment by MTCON
; HOST - set ARPANET host number of this CPU
; MAGTAPE - logical magtape units (e.g. MTA3:) with
; actual serial numbers
; NODE - set DECNET node name and number for this CPU
; PRINTER - load VFU and RAM files and set lowercase attribute
; TERMINAL - set auto-baud, nobell, remote, and speed
; attributes of terminals
; TIMEZONE - set time zone for this site
;
; 1 THIS ENTRY IF FUNCTIONALLY EQUIVALENT TO POSITION 0,
; BUT IT IS NOT USED BY THE MONITOR.
;
; 2 CONTAINS PROGRAM VERSION NUMBER.
;
; 3 CALLED BY RUNDD ROUTINE IN MEXEC DURING SYSTEM
; INITIALIZATION AFTER A CRASH TO:
; 1. Copy PS:<SYSTEM>DUMP.EXE to PS:<SYSTEM>DUMP.CPY
; 2. Extract unrecorded SPEAR entries from DUMP.EXE and
; log them using the SYERR JSYS
;
; 4 CALLED BY CHKR ROUTINE IN MEXEC WHILE SYSTEM IS RUNNING
; WHENEVER PHYSIO DETECTS THAT A TAPE DRIVE HAS COME ONLINE
; AND PHYSIO DIDN'T KNOW ABOUT THE DRIVE AT SYSTEM STARTUP.
; THE CONFIG FILE IS READ AS IF ENTERED AT ENTRY VECTOR
; POSITION 0, EXCEPT ONLY THE "MAGTAPE" COMMANDS IN THE
; FILE ARE PROCESSED; ALL OTHER COMMANDS ARE IGNORED.
SUBTTL SETSPD DATA
DICT: 0 ;FREE SPACE HEADER
CSBUFP: 0 ;SCRATCH STRING POINTER
STRSIZ==100 ;NUMBER OF SCRATCH STRING WORDS TO ALLOCATE
SPDTBL==560000 ;SPEED TABLE
REMTBL==570000 ;REMOTE TABLE
FREE==600000 ;WHERE FREE SPACE STARTS
FRESIZ==50000 ;SIZE OF FREE SPACE
JFN: 0 ;JFN OF INPUT COMMAND FILE
DATBLK: BLOCK 3 ;FOR IDTNC STUFF FROM COMND (.CMTAD FUNCTION)
SMONBK: BLOCK .SVDSN+1 ;BLOCK FOR SMON FOR ALLOW / RESTRICT
LODLCP: BLOCK <LPTN==2> ;FLAG NONZERO FOR LOWERCASE PRINTER
CLSBLK: 3 ;COUNT
BLOCK 2 ;DATA ARE
MTBLK: 3 ;SIZE OF BLOCK
BLOCK 2 ;FOR OTHER ARGS
EOLF: BLOCK 1
PDLEN=500 ;LENGTH OF PUSH-DOWN STACK
PDL: BLOCK PDLEN ;PUSH-DOWN STACK
PAGMAX: BLOCK 1 ;WORD TO HOLD HIGHEST DUMP PAGE NUMBER
FILNAM: BLOCK ^D28 ;NAME OF RAM OR VFU FILE PUT HERE
LINES: BLOCK 1 ;WORD TO HOLD LINES
STRBLK: BLOCK .MSSLN ;BLOCK FOR STRUCTURE COMMAND
HSBBUF: BLOCK HS%LEN ;LENGTH OF HSB AND HEADER
DMPSTR: BLOCK 2 ;Hold the dump structure name here
ALISTR: BLOCK 2 ;Hold the structure alias of current str here
STRFLG: BLOCK 1 ;Flag whether we have a structure to dismount
NUMUNT: BLOCK 1 ;Number of units in the dump structure
UNTLFT: BLOCK 1 ;Number of units let unmounted in structure
CURSTR: BLOCK 2 ;Name of the structure currently being examined
TIMVAL: BLOCK 1 ;Timer value to retry for structure.
RTYTIM: EXP ^D30000 ;Amount of time for retry, 30 seconds.
ASCTBL: BLOCK <ASCTBZ==^D100>+1 ;ACCOUNTING SHIFT CHANGE TABLE
CPYPGS==^D10 ;# OF PAGES TO COPY WITH EACH PMAP
CPYWDS==CPYPGS_PGSFT ;NUMBER OF WORDS TO COPY
PGSFT==11 ;PAGE SHIFT VALUE
PG0PG==30 ;PAGE 0 OF DUMP.EXE
PG0ADR=PG0PG_PGSFT
TMPPG==31 ;2 PAGES FOR TEMPORARY MAPPING
TMPADR=TMPPG_PGSFT
MMPPG==33 ;PAGE FOR MAPPING MMAP PAGE
MMPADR=MMPPG_PGSFT
DMPPG==40 ;PAGE FOR MAPPING DUMP FILE
DMPADR==DMPPG_PGSFT
CPYPG==DMPPG+CPYPGS ;PAGE FOR MAPPING COPY FILE
CPYADR==CPYPG_PGSFT
MAPPG==CPYPG+CPYPGS ;PAGE FOR BUILDING DUMP FILE MAP
MAPADR=MAPPG_PGSFT
ESYPG==MAPPG+CPYPGS ;PAGE FOR MAPPING ERROR.SYS
ESYSAD==ESYPG_PGSFT
MSTRPG==700 ;Page 700 is for building MSTR args
MSTRAD==700000 ;Base address of MSTR page
MNTBLK==710000 ;Where to build mount blocks within page
CMDSTG ;STORAGE FOR COMND JSYS
;PROGRAM ENTRY VECTOR
ENTVEC: JRST START ;STARTING LOCATION
JRST START ;REENTER LOCATION
VSTSPD ;VERSION NUMBER
JRST START3 ;ALTERNATE STARTING LOCATION
JRST START4 ;MTA ONLINE ENTRY VECTOR
ENVLEN==.-ENTVEC ;ENTRY VECTOR LENGTH
;COMMAND TABLES:
;****************************************************************
;
; WARNING!!!
;
; THESE TABLES MUST BE KEPT IN ALPHABETICAL ORDER FOR TBLUK
;
;****************************************************************
ALTLVT: ALTSIZ-1,,ALTSIZ-1 ;COMMANDS ALLOWED WHEN A DEVICE COMES ONLINE
T ALLOW,ALLOW
T DONTCARE,DCARE
T MAGTAPE,MAGTAP
T RESTRICT,RESTRI
ALTSIZ==.-ALTLVT
; TABLE OF DISK DRIVE TYPES FOR ALLOW AND RESTRICT COMMANDS
DSKTAB: EDSKTB-.-1,,EDSKTB-.-1
T RP04,.MSRP4 ;RP04
T RP05,.MSRP5 ;RP05
T RP06,.MSRP6 ;RP06
T RP07,.MSRP7 ;RP07
T RP20,.MSR20 ;RP20
EDSKTB:
LEV1TB: ELEVL1-.-1,,ELEVL1-.-1
T ALLOW,ALLOW
T ARCHIVE-TAPE-RECYCLE-PERIOD,ARCHIV
T BATCH-BACKGROUND,BATBGD
T BATCH-CLASS,BCHCLS
T BIAS,BIAS
T CHANGE,CHANGE
T CREATE,CREATE
T DAYLIGHT,DAYLIG
T DECNET,DECNET
T DEFINE,DEFINE
T DISABLE,DISABL
T DONTCARE,DCARE
T ENABLE,ENABLE
T ETHERNET,ETHERN
T HOST,HOST
T LAT-STATE,LAT
T MAGTAPE,MAGTAP
T NODE,NODNAM
T PRINTER,LPTLOD
T RESTRICT,RESTRI
T TAPE-RECOGNITION-ERRORS,TRECER
T TAPE-RECYCLE-PERIOD,TAPRCY
T TERMINAL,TERM
T TIMEZONE,TIMZON
ELEVL1:
;TABLE FOR TERMINAL CHARACTERISTICS
LEV2TB: ELEVL2-.-1,,ELEVL2-.-1
T AUTO-BAUD,AUTO
T NOBELL,NOBELL
T REMOTE,REMOTE
T SPEED,SPEED
PMPPAG==CPYPG+CPYPGS ;PAGE MAP PAGES
ELEVL2:
MOREBT==1B0 ;THERE'S MORE OF COMMAND
; TABLE OF OPTIONS FOR ENABLE COMMANDS
ENAOPT: ENASIZ-1,,ENASIZ-1
T ACCOUNT-VALIDATION,[ENACCT]
T CLASS-SCHEDULING,[MOREBT!ECSKED]
T DIRECTORY-PARAMETER-SETTING,[ENADIR]
T FAST-LOGIN-OPTION,[ENAFST]
T FULL-LATENCY-OPTIMIZATION,[ENAFLO]
T HANGUP-IF-LOGGED-IN,[ENAHLI]
T HANGUP-IF-LOGGED-OUT,[ENAHLO]
T JOB0-CTY-OUTPUT,[J0OUTE]
T SYSTEM-MESSAGE-LEVEL-0,[ENALV0]
T SYSTEM-MESSAGE-LEVEL-1,[ENALV1]
T TAPE-DRIVE-ALLOCATION,[ENATDA]
T WORKING-SET-PRELOADING,[ENAWSP]
ENASIZ==.-ENAOPT
; TABLE OF OPTIONS FOR DISBLE COMMANDS
DISOPT: DISSIZ-1,,DISSIZ-1
T ACCOUNT-VALIDATION,[DISACT]
T DIRECTORY-PARAMETER-SETTING,[DISDIR]
T FAST-LOGIN-OPTION,[DISFST]
T FULL-LATENCY-OPTIMIZATION,[DISFLO]
T HANGUP-IF-LOGGED-IN,[DISHLI]
T HANGUP-IF-LOGGED-OUT,[DISHLO]
T JOB0-CTY-OUTPUT,[J0OUTD]
T SYSTEM-MESSAGE-LEVEL-0,[DISLV0]
T SYSTEM-MESSAGE-LEVEL-1,[DISLV1]
T WORKING-SET-PRELOADING,[DISWSP]
DISSIZ==.-DISOPT
; TABLE OF OPTIONS FOR LOADING PRINTERS
LPTTAB: LPTBSZ-1,,LPTBSZ-1
T LOWERCASE, .MOSTS
T RAM, .MOLTR
T VFU, .MOLVF
LPTBSZ==.-LPTTAB
SLAVT: SLVBSZ-1,,SLVBSZ-1
T TU45,.MTT45 ;TU45
T TU70,.MTT70 ;TU70
T TU71,.MTT71
T TU72,.MTT72 ;TU72
T TU73,.MTT73
T TU77,.MTT77 ;TU77
T TU78,.MTT78 ;TU78
SLVBSZ==.-SLAVT
;TABLE OF DAYS OF WEEK FOR "CHANGE" COMMAND
DOWTAB: XWD DOWTBZ-1,DOWTBZ-1
T ALL,<<1B0!1B1!1B2!1B3!1B4!1B5!1B6>_-^D18>
T FRIDAY,<<1B4>_-^D18>
T MONDAY,<<1B0>_-^D18>
T SATURDAY,<<1B5>_-^D18>
T SUNDAY,<<1B6>_-^D18>
T THURSDAY,<<1B3>_-^D18>
T TUESDAY,<<1B1>_-^D18>
T WEDNESDAY,<<1B2>_-^D18>
T WEEKDAYS,<<1B0!1B1!1B2!1B3!1B4>_-^D18>
T WEEKENDS,<<1B5!1B6>_-^D18>
DOWTBZ=.-DOWTAB
;TABLE FOR TYPE OF CLASS SCHEDULING DESIRED
SKDOPT: SKDSIZ-1,,SKDSIZ-1
T ACCOUNTS,0
T POLICY-PROGRAM,1
SKDSIZ==.-SKDOPT
;TABLE FOR LAT-STATE ON AND OFF
LATSTA: LATSIZ-1,,LATSIZ-1
T OFF,LS.OFF
T ON,LS.ON
LATSIZ==.-LATSTA
;TABLE FOR DAYLIGHT SAVING TIME HANDLING
DSTOPT: DSTSIZ-1,,DSTSIZ-1
T AUTOMATIC,.DSTAU
T OFF,.DSTNV
T ON,.DSTAL
DSTSIZ==.-DSTOPT
;TABLE FOR WINDFALL HANDLING
SKDOP0: SKDSZ0-1,,SKDSZ0-1
T ALLOCATED,0
T WITHHELD,1
SKDSZ0==.-SKDOP0
;Table for DECNET parameters
DCNTA0: DCNSZ0-1,,DCNSZ0-1
T BUFFER-SIZE,[.NDBSZ,,DCNNUM]
T DEFAULT-BUFFERS-PER-LINK,[.NDDBL,,DCNNUM]
T DEFAULT-FLOW-CONTROL,[.NDFLO,,NSPFLO]
T MAXIMUM-ADDRESS,[.NDMXA,,DCNNUM]
T MAXIMUM-BUFFERS,[.NDMXB,,DCNNUM]
T ROUTER-ENDNODE,[.NDRTR,,ROUEND]
T ROUTER-LEVEL-1,[.NDRTR,,ROULV1]
DCNSZ0==.-DCNTA0
;Table for DECNET DEFAULT-FLOW-CONTROL
FLOTAB: FLOSZ0-1,,FLOSZ0-1
T NONE,[FCM.NO]
T SEGMENT,[FCM.SG]
FLOSZ0==.-FLOTAB
;DEFINE REGISTERS USED
A==1 ;OLD WAY...
B==2
C==3
D==4
STDAC. ;AND THE NEW WAY...
;USEFUL DEFINITIONS
DEFSTR SEBSIZ,2,35,12 ;POINTER TO SIZE FIELD IN SYSERR BLOCK
DEFSTR SEBERC,HSBBUF,8,9
STGADR==:<MASKB 12,35> ;MASK FOR STORAGE ADDRESSES (IMMEDIATE POINTERS
; OR SPT ENTRIES)
PTRCOD==:<MASKB 0,2> ;CODE FIELD IN PAGE POINTER
SPTX==:<MASKB 18,35> ;MASK FOR SPT INDICES
IFN 0,<
SPRCNT=113 ;ADDRESS OF RUNNING SPEAR ENTRY COUNT
> ;REMOVAL OF SPRCNT CODE.
SEBQOU=24 ;ADDRESS OF POINTER TO SYSERR QUEUE
MMAPWD=25 ;ADDRESS OF POINTER TO MMAP PAGE
SPTWD=237 ;ADDRESS OF POINTER TO SPT
MSECWD=240 ;ADDRESS OF POINTER TO MSECTB
SEBHED==3 ;NUMBER OF HEADER WORDS IN SYSERR BLOCK
ESYCNT==4 ;OFFSET IN SYSERR HEADER FOR ENTRY COUNTER
MSCADR: BLOCK 1 ;ADDRESS OF MSECTB
SPTADR: BLOCK 1 ;ADDRESS OF SPT
SECTN: BLOCK 1 ;SECTION NUMBER FOR MMPPG
TMPJFN: BLOCK 1 ;SAFETY STORAGE FOR JFNS
;DEFINE INTERRUPT SYSTEM TABLES
PCLEV1: BLOCK 1
PCLEV2: BLOCK 1
.ICLPO==0 ;CHANNEL FOR LINE PRINTER OFFLINE
.ICHNG==1 ;CHANNEL FOR TIMER INTERRUPT
HNGTIM==<^D30*^D1000> ;SETSPD IS HUNG IF COMMAND TAKES >30 SECONDS
TIMENA: BLOCK 1 ;FLAG WORD TO SPECIFY IF TIMER PSI ENABLED
UMODF==1B5 ;USER MODE FLAG
LEVTAB: PCLEV1
PCLEV2
0
CHNTAB: XWD 1,LPTINT ;.ICLPO CHANNEL
XWD 2,HUNG ;.ICHNG CHANNEL
BLOCK ^D34
;ERROR macro prints error message and dies
DEFINE ERROR (MESS)
< CALL [ PUSH P,A
TMSG <
*****************
>
HRROI A,[ASCIZ /SETSPD: MESS/]
ESOUT
TMSG <
*****************
>
POP P,A
HALTF
RET]
>
;MACRO FOR CAUSING A COMMAND ERROR THAT WE DETECT, AS OPPOSED TO ONE THAT
;COMND JSYS DETECTS
DEFINE COMERR (TEXT)
< CALL [ TMSG <
*****************
>
HRROI A,[ASCIZ /SETSPD: TEXT/]
ESOUT
TMSG <
*****************
>
JRST CMDER1]
>
DEFINE JSYERR ($TEXT,$INST) <
ERJMP [ TMSG <
*****************
? SETSPD:>
TMSG <$TEXT> ;OUTPUT OPTIONAL TEXT
CALL JSYER0 ;OUTPUT JSYS ERROR MSG
TMSG <
*****************
>
IFNB <$INST>, <XCT [$INST]> ;DO INSTRUCTION IF THERE
JRST .+1]> ;AND GO ON
JSYER0::MOVEI .AC1,.PRIOU
DOBE% ;WAIT FOR OUTPUT TO FINISH
MOVEI .AC1,.PRIOU ;SET UP FOR ERSTR%
HRLOI .AC2,.FHSLF
SETZ .AC3,
ERSTR% ;PRINT ERROR
NOP
NOP
RET
DEFINE EMSG (ETXT) < ;;ERROR-MESSAGE MACRO
HRROI T1,[ASCIZ/
*****************
? SETSPD: ETXT
*****************
/]
PSOUT>
DEFINE BCONFIG (R) <
IFE VMINOR,<ASCIZ /SYSTEM:'R'-CONFIG.CMD/>
IFG VMINOR,<
DEFINE BSP (R1,LETT) <
IRPC LETT,<
IFE "1"-"'LETT'"+VMINOR-1,<
ASCIZ /SYSTEM:R1-LETT-CONFIG.CMD/
STOPI>
>
>
BSP (\VMAJOR,"1234567")>
>
RCONFG: BCONFIG (\VMAJOR)
SUBTTL SETSPD PROCEDURE
;ENTRY POINTS FOR READING CONFIG.CMD FILE
START4: TDZA P5,P5 ;INDICATE MTA ONLINE ENTRY
START: SETOM P5 ;INDICATE NORMAL ENTRY
MOVE P,[IOWD PDLEN,PDL] ;SET UP PUSH DOWN LIST
CALL INIT ;SET UP PSI, CAPABILITIES, ETC.
CALL FREINI ;INITIALIZE FREE SPACE
CALL CMDINI ;INITIALIZE FOR COMND JSYS
;NOW FIND THE COMMAND FILE
MOVX A,GJ%SHT!GJ%OLD!GJ%PHY
HRROI B,RCONFG ;SYSTEM:X-CONFIG.CMD
GTJFN ;FIND THE FILE
JRST FINISH ;NOT THERE. GO DEFAULT EVERYTHING
MOVEM A,JFN ;REMEMBER THE JFN
MOVE B,[070000,,200000] ;READ ONLY
OPENF ;GET IT
JRST [ MOVEI A,.PRIOU ;THE CTY NO DOUBT
HRLOI B,.FHSLF ;THIS FORK
SETZ C, ;NO FLAGS
ERSTR ;OUTPUT SOMETHING
JFCL
JFCL
JRST FINISH] ;AND GO DEFAULT EVERYTHING
HRL A,JFN ;GET JFN
HRRI A,.NULIO ;DON'T LET COMND TRY TO TYPE CARRIAGE RETURN BEFORE PROMPT
MOVEM A,.CMIOJ+SBK ;TELL COMND TO READ FROM FILE
CMND0: MOVEI A,CMND0 ;IF HUNG, CONTINUE AT CMND0
MOVEM A,HNGCON ;SAVE IT
MOVEM P,HNGSTK ;SAVE THE STACK
CALL SETTIM ;SET THE TIME AT WHICH WE WILL BE HUNG
HRROI A,[0] ;NO PROMPT WHEN READING FROM FILE
CALL DPROMP ;INITIALIZE COMMAND LINE
SKIPN P5 ;CHECK FOR MAGTAPE ENTRY
SKIPA A,[[FLDDB. .CMKEY,,ALTLVT]] ;ALTERNATE TABLE
MOVEI A,[FLDDB. .CMKEY,,LEV1TB] ;THE TABLE
CALL RFLDE ;READ KEYWORD
JRST [ CALL GETERR ;FAILED, SEE WHY
CAIN A,IOX4 ;END OF FILE?
JRST FINISH ;YES, FINISH UP
CAIN A,NPXNOM ;INVALID SWITCH OR KEYWORD?
SKIPE P5 ;AND LOOKING FOR MAGTAPE KEYWORD?
JRST CMDERR ;NO SO COMPLAIN AND CONTINUE
JRST CMND0] ;YES SO IGNORE AND GET NEXT COMMAND
MOVE B,(B) ;GET TABLE WORD
AOS NCMDS ;INCREMENT NUMBER OF COMMANDS SEEN
CALL (B) ;EXECUTE THE COMMAND
JRST CMND0 ;DO REST OF COMMANDS
;GETERR asks monitor for last jsys error code.
;
;Returns+1: A/ error code
GETERR: MOVEI A,.FHSLF ;OURSELF
GETER ;GET ERROR
HRRZ A,B ;KEEP ONLY THE CODE
RET
; INIT - RESET PROCESS, SET UP SOFTWARE INTERRUPT SYSTEM,
; ENABLE CAPABILITIES
; RETURNS +1: ALWAYS
INIT: RESET ;GET TO A KNOWN STATE
MOVEI A,.FHSLF ;GET OWN ID
RPCAP ;READ CAPABILITES
MOVE C,B
EPCAP ;ENABLE ALL CAPABILITIES
MOVE B,[LEVTAB,,CHNTAB]
SIR ;SET INTERRUPT TABLE ADDRESSES
EIR ;TURN ON INTERRUPT SYSTEM
MOVX B,1B<.ICLPO>!1B<.ICHNG> ;ACTIVATE LINE PRINTER OFFLINE
AIC ;AND TIMER EXPIRED CHANNELS
SETOM TIMENA ;SAY TIMER PSI ENABLED
SETZM NCMDS ;INITIALIZE COMMAND COUNTER
RET
; SETTIM - ROUTINE TO SET TIME AT WHICH THE COMMAND IS DETERMINED HUNG
; Returns +1: ALWAYS
SETTIM: SKIPN TIMENA ;IS TIMER PSI ENABLED?
RET ;NO, JUST RETURN
MOVE T1,[.FHSLF,,.TIMAL];REMOVE ALL TIME LIMITS
TIMER
ERJMP TIMERR ;ERROR, GIVE MESSAGE AND RETURN
MOVEI T2,HNGTIM ;GET TIME LIMIT OF COMMAND
MOVEI T3,.ICHNG ;SPECIFY HUNG PSI CHANNEL
MOVE T1,[.FHSLF,,.TIMEL];ELAPSED TIME FUNCTION
TIMER
ERJMP TIMERR ;ERROR, GIVE MESSAGE AND RETURN
RET
TIMERR: EMSG <Timer JSYS failed - PSI System for Hung SETSPD disabled>
MOVEI T1,.FHSLF ;GET PROCESS HANDLE
MOVE T2,[1B<.ICHNG>] ;CHANNEL FOR TIMER JSYS
DIC ;DEACTIVATE THIS CHANNEL
SETZM TIMENA ;SAY PSI DISABLED FOR TIMER JSYS
RET ;AND RETURN
;COMMAND LEVEL ACTION ROUTINES.
;FIRST TERMINAL
TERM: TRVAR <<DEFBLK,1+.CMDEF>,<DEFOUT,3>>
MOVEI A,[FLDDB. .CMNUX,CM%SDH,8,<terminal line number>]
CALL RFIELD ;GET LINE NUMBER, CMNUMX ALLOWS HYPHEN AFTER NUMBER
HRLZM B,LINES ;SAVE LINE NUMBER
MOVEI A,[FLDDB. .CMTOK,CM%SDH,<-1,,[ASCIZ /-/]>,<hyphen (-) if specifying range>]
CALL RFLDE ;SEE IF HYPHEN
CAIA ;NO HYPHEN
JRST GTRNGE ;YES. GET RANGE
HLRS LINES ;EXTEND LINE NUMBER
JRST LINKEY ;GO GET THE KEY
GTRNGE: MOVEI A,[FLDDB. .CMNUM,CM%SDH,8,<terminal line number>]
CALL RFIELD ;READ END OF RANGE
HRRM B,LINES ;STASH LAST LINE NUMBER
; ..
;NOW READ OUT THE KEY WORD
LINKEY: SETZB P1,P2 ;CLEAR FLAGS
MOVEI A,[FLDDB. .CMCFM,,,,,[
FLDDB. .CMKEY,,LEV2TB]]
CALL RFIELD ;GET CONFIRMATION OR KEYWORD
LOAD D,CM%FNC,.CMFNP(C)
CAIN D,.CMCFM ;END OF LINE YET?
RET ;YES, DONE
MOVE B,(B) ;NO, GET TABLE ENTRY
JRST (B) ;DO FUNCTION, RETURNS TO LINKEY
;IF HERE, LINES ARE REMOTE
AUTO: TXOA P2,MO%AUT ;SET THE AUTO BUAD BIT
REMOTE: TXO P2,MO%RMT ;SET THE REMOTE BIT
HRRZ A,LINES ;GET FIRST LINE
HLRZ B,LINES ;GET LAST LINE
SUBI B,1(A) ;GET # TO DO
HRLI A,0(B) ;AN AOBJN WORD
HLR A,LINES ;FIRST LINE AGAIN
DOLINE: SKIPN P1 ;SETTING SPEED?
IORM P2,REMTBL(A) ;SAY IT IS REMOTE
SKIPE P1 ;SETTING REMOTE?
MOVEM P1,SPDTBL(A) ;NO. SET SPEED
SKIPN SPDTBL(A) ;HAVE A SPEED YET?
JRST REMOT1 ;NO
PUSH P,A ;SAVE LINES
CALL SPDSET ;GO SET THE SPEED
POP P,A ;RESTORE AOBJN WORD
REMOT1: AOBJN A,DOLINE ;GO DO ALL OF THEM
JRST LINKEY ;GO BACK FOR MORE ATTRIBUTES OF THIS SET OF TERMINALS
; HERE TO SET THE "IGNORE INPUT" (NO BELLS) BIT
NOBELL: HRRZ D,LINES ;GET LAST LINE NUMBER
HLRZ B,LINES ;GET FIRST LINE NUMBER
SUBI B,1(D) ;FORM - NUMBER IN RANGE
HRLI D,(B) ;FORM AN AOBJN POINTER TO LOOP
HLR D,LINES ; OVER ALL THE LINES IN THE RANGE
NOBEL1: MOVEI A,400000(D) ;GET LINE DESIGNATOR
MOVX B,.MOSIG ;SET "IGNORE INPUT" BIT
MOVX C,1 ;TURN THE BIT ON
MTOPR ;SET THE LINE TO IGNORE CHARACTERS UNTIL OPENED
ERJMP .+1 ;IGNORE FAILURE HERE
AOBJN D,NOBEL1 ;LOOP OVER ALL THE LINES IN THE INDICATED RANGE
JRST LINKEY ;GO GET THE NEXT KEYWORD IN THE COMMAND
;SET LINE SPEEDS
SPEED: MOVEI A,[FLDDB. .CMNUM,CM%SDH,5+5,<input speed>]
CALL RFIELD ;READ THE INPUT SPEED
IFN NICSW,<
CAIN B,^D19200 ;Is it 19200?
MOVEI B,^D134 ;Yes, then its really 134
>;IFN NICSW
HRLI P1,400000(B) ;IN CASE NO MORE
HRROI A,DEFOUT ;POINT TO BUFFER FOR DEFAULT OUTPUT SPEED
MOVEM A,.CMDEF+DEFBLK ;STORE POINTER TO DEFAULT OUTPUT SPEED
MOVEI C,5+5 ;CREATE DEFAULT IN DECIMAL
NOUT ;CREATE IT
JSHLT ;SHOULDN'T EVER FAIL
HRLI A,[FLDDB. .CMNUM,CM%DPP!CM%SDH,5+5,<output speed>]
HRRI A,DEFBLK ;MAKE BLT POINTER
BLT A,.CMDEF-1+DEFBLK ;PUT WRITABLE COMND FUNCTION BLOCK
MOVEI A,DEFBLK ;POINT AT THE CREATED BLOCK
CALL RFIELD ;READ OUTPUT SPEED, DEFAULT TO INPUT
IFN NICSW,<
CAIN B,^D19200 ;Is it 19200?
MOVEI B,^D134 ;Yes, then its really 134
>;IFN NICSW
HRRI P1,0(B) ;SAVE OUTPUT SPEED
JRST REMOTE ;GO SET SPEEDS
;ROUTINE TO SET SPEED OF A LINE.
;INPUT IS : A/ LINE NUMBER
SPDSET: MOVEI A,0(A) ;CLEAN UP ARG
SKIPE REMTBL(A) ;THIS A REMOTE SETTING?
JRST SPDST1 ;YES. ALWAYS USE FILE SETTING
MOVEI A,400000(A) ;GET TTY DESIGNATOR
MOVEI B,.MORSP ;GET SPEED FROM MONITOR
MTOPR ;GET IT
ERJMP REMOT2 ;?
TRZ A,400000
SKIPG C ;GET IT?
SPDST1: MOVE C,SPDTBL(A) ;NO. USE FILE'S VALUE
TLZ C,(1B0) ;GET RID OF SIGN BIT
MOVEI B,.MOSPD ;SPEED SETTING
IOR B,REMTBL(A) ;ADD IN THE REMOTE AND AUTO BITS (IF ANY)
TRO A,400000 ;TTY DESIGNATOR
MTOPR ;DO IT
ERJMP REMOT2 ;IGNORE ERROR
MOVEI B,.MORNT ;REQ MSG SUPPRESS STATUS FROM
MTOPR ;MONITOR FOR TTY (A/ TTY#)
ERJMP REMOT2 ;IGNORE ERROR
MOVEI B,.MOSNT ;SET MSG SUPPRESS BIT FOR TTY
MTOPR ;SAME AS BEFORE
ERJMP REMOT2 ;IGNORE ERROR
REMOT2: RET ;ALL DONE
;ROUTINE TO APPLY DEFAULT SPEEDS AT EOF
FINISH: JUMPE P5,QUIT ;QUIT IF MTA ONLINE
MOVE A,[SIXBIT /TTYJOB/] ;FIRST FIND # OF TTY'S
SYSGT ;GET IT
HLLZ P3,B ;MAKE AOBJN POINTER
FIN1: SKIPE SPDTBL(P3) ;THIS ONE SET YET?
JRST FIN2 ;YES. GO ON
MOVEI A,0(P3) ;NO. GET LINE #
MOVE B,[^D300,,^D300] ;DEFAULT SPEED
MOVEM B,SPDTBL(A) ;STORE IT
CALL SPDSET ;GO SET THE SPEED
FIN2: AOBJN P3,FIN1 ;DO ALL LINES
;; CALL REFILL ;GO LOAD THE CACHE REFILL ALGORITHM
QUIT: HALTF ;AND DONE
;THIS CODE ALLOWS AND RESTRICTS MSCP SERVER ACCESS TO DISK DRIVES
;FORMAT OF A COMMAND LINE IS:
; ALLOW/RESTRICT "DRIVE TYPE" "LOW SERIAL #" or
; ALLOW/RESTRICT "DRIVE TYPE" "HIGH SERIAL #" "LOW SERIAL #"
;
RESTRI: SKIPA T1,[SV%DDU]
ALLOW: SETZ T1,
MOVEM T1,SMONBK+.SVTYP ;SAVE FLAGS FOR NOW
MOVEI T1,.SVDSN+1 ;LENGTH
MOVEM T1,SMONBK+.SVCNT ;SAVE IT
MOVEI T1,[FLDDB. .CMKEY,,DSKTAB] ;PARSE THE DRIVE TYPE
CALL RFIELD
HRRZ T2,(T2) ;GET TABLE ENTRY
IORM T2,SMONBK+.SVTYP ;SAVE IT WITH FLAGS
IORI T2,400 ;ASSUME NO HIGH ORDER WORD WILL BE GIVEN
LSH T2,20 ; SO CONSTRUCT IT
MOVEM T2,SMONBK+.SVDSH ;AND SAVE IT
MOVEI T1,[FLDDB. .CMNUM,,^D10] ;GET THE SERIAL NUMBER
CALL RFIELD
MOVEM T2,SMONBK+.SVDSN ;SAVE IT AS LOW ORDER
MOVEI T1,[FLDDB. .CMCFM,,,,,[
FLDDB. .CMNUM,,^D10]]
CALL RFIELD ;GET CONFIRMATION OR KEYWORD
LOAD T4,CM%FNC,.CMFNP(T3)
CAIE T4,.CMCFM ;END OF LINE YET?
JRST [EXCH T2,SMONBK+.SVDSN ;NO, THIS IS LOW ORDER NUMBER
MOVEM T2,SMONBK+.SVDSH ;AND THE OTHER WAS THE HIGH ORDER
CONFRM ;NOW PARSE AN EOL
JRST .+1] ;AND CONTINUE
MOVEI T1,.SFMSD ;GET FUNCTION
MOVEI T2,SMONBK ;ADDRESS OF BLOCK
SMON ;DO IT
ERJMP [ HRROI T1,[ASCIZ/
*****************
? SETSPD: UNABLE TO ALLOW MSCP ACCESS TO DISK DRIVE, SERIAL NUMBER /]
MOVE T2,SMONBK+.SVTYP ;GET FLAGS WORD
TXNE T2,SV%DDU ;WAS IT RESTRICT?
HRROI T1,[ASCIZ/
*****************
? SETSPD: UNABLE TO RESTRICT MSCP ACCESS TO DISK DRIVE, SERIAL NUMBER /]
PSOUT ;PRINT ERROR
MOVE T2,SMONBK+.SVDSH ;HIGH ORDER SERIAL NUMBER
MOVEI T1,.PRIOU ;TO CTY
MOVEI T3,^D10 ;IN DECIMAL
NOUT ;PRINT ERROR
JFCL
TMSG < >
MOVEI T1,.PRIOU
MOVE T2,SMONBK+.SVDSN ;LOW ORDER SERIAL NUMBER
NOUT
JFCL
TMSG < BECAUSE: >
JRST GENERR] ;TELL WHY
RET
;
;
;DONTCARE SMON JSYS CODE
;
DCARE: MOVEI T1,[FLDDB. .CMNUM,,^D10] ;GET THE CHANNEL NUMBER
CALL RFIELD
MOVEM T2,SMONBK
MOVEI T1,[FLDDB. .CMNUM,,^D10] ;GET CONTROLLER NUMBER
CALL RFIELD
MOVEM T2,SMONBK+1
MOVEI T1,[FLDDB. .CMNUM,,^D10] ;GET UNIT NUMBER
CALL RFIELD
MOVEM T2,SMONBK+2
MOVEI T1,[FLDDB. .CMCFM,,,,,[
FLDDB. .CMNUM,,^D10]]
CALL RFIELD ;GET CONFIRMATION OR KEYWORD
LOAD T4,CM%FNC,.CMFNP(T3)
CAIE T4,.CMCFM ;END OF LINE YET?
CONFRM ;NOW PARSE AN EOL
MOVEI T1,.SFDCD ;GET FUNCTION
MOVEI T2,SMONBK ;ADDRESS OF BLOCK
MOVE T4,SMONBK ;PICK UP CHANNEL
STOR T4,.SDF%C,T3 ;STOR CHANNEL
MOVE T4,SMONBK+1 ;PICK UP CONTROLLER
STOR T4,.SDF%K,T3
MOVE T4,SMONBK+2 ;PICK UP UNIT
STOR T4,.SDF%U,T3
SMON ;DO IT
ERJMP [ HRROI T1,[ASCIZ/
*****************
? SETSPD: UNABLE TO ALLOW DON'T CARE ACCESS TO DISK DRIVE, CHANNEL\CONTROLLER\UNIT /]
PSOUT
MOVE T2,SMONBK ;CHANNEL NUMBER
MOVEI T1,.PRIOU ;TO CTY
MOVEI T3,^D10 ;IN DECIMAL
NOUT ;PRINT ERROR
JFCL
TMSG < >
MOVEI T1,.PRIOU
MOVE T2,SMONBK+1 ;CONTROLLER
NOUT
JFCL
TMSG < >
MOVEI T1,.PRIOU
MOVE T2,SMONBK+2 ;UNIT NUMBER
NOUT
JFCL
TMSG < BECAUSE: >
JRST GENERR] ;TELL WHY
RET
;THIS CODE PROCESSES THE MAGTAPE CONFIGURATION COMMANDS. FORMAT
;OF A COMMAND LINE IS:
; MAGTAPE "LUN" "SERIAL#" "SLAVE TYPE"
MAGTAP: MOVEI A,[FLDDB. .CMNUM,CM%SDH,5+5,<unit number>]
CALL RFIELD
MOVE P1,B ;SAVE LUN
MOVE D,P1 ;RESOTRE LUN
MOVEI A,[FLDDB. .CMNUM,CM%SDH,5+5,<serial number>]
CALL RFIELD
HRRZ P2,B ;SAVE SERIAL NUMBER
MOVEI A,[FLDDB. .CMKEY,,SLAVT,<slave type,>]
CALL CFIELD ;GET SLAVE TYPE AND CONFIRMATION
HRL P1,(B) ;SAVE SLAVE TYPE IN LEFT HALF OF P1
MOVE A,P1 ;SET LUN
MOVE B,P2 ;SET SERIAL #
MTALN ;DO IT
ERJMP [ JUMPE P5,CMDER1 ;NO MESSAGE IF MTA ONLINE
HRROI A,[ASCIZ /
*****************
? SETSPD: Could not set MTA /]
PSOUT
MOVEI A,.PRIOU ;TO THE CTY
EXCH B,D ;GET MTA, SAVE SERIAL #
MOVEI C,10 ;IN OCTAL
NOUT ;DO IT
JFCL
HRROI A,[ASCIZ / SERIAL # /]
PSOUT
MOVEI A,.PRIOU
MOVE B,D
MOVEI C,12
NOUT ;OUPUT THE SERIAL # AS WELL
JFCL
TMSG <
*****************
>
JRST CMDER1] ;AND DONE
RET
; TAPE-RECOGNITION-ERRORS COMMAND
TRECER: MOVEI T1,[FLDDB. .CMKEY,,TRETB] ;GET FDB ADDRESS
CALL CFIELD ;GET KEYWORD AND CONFIRMATION
HRRZ T4,(T2) ;GET BIT SETTING
MOVEI T1,.SFTDF ;GET TMON FUNCTION CODE
TMON ;GET CURRENT MOUNTR CONTROLS
STOR T4,MT%UUT,T2 ;SET OR CLEAR UNLOAD-UNREADABLE-TAPES
SMON ;RESTORE CONTROL WORD
RET
; KEYWORD TABLE FOR TAPE-RECOGNITION-ERRORS
TRETB: TRETBL,,TRETBL
T REGARD-AS-UNLABELED,0
T UNLOAD,1
TRETBL==.-TRETB-1
; ENABLE COMMAND
DISABL: MOVEI A,[FLDDB. .CMKEY,,DISOPT]
JRST ENA1
ENABLE: MOVEI A,[FLDDB. .CMKEY,,ENAOPT]
ENA1: CALL RFIELD ;GET OPTION
MOVE A,(B) ;TABLE WORD
MOVE A,(A) ;GET CONTROL BITS AND DISPATCH ADDRESS
TXZN A,MOREBT ;IS THERE MORE OF THIS COMMAND?
CONFRM ;NO, SO CONFIRM NOW
CALLRET (A) ;GO PERFORM INDICATED FUNCTION
; HERE TO PERMIT CHANGING DIRECTORY PARAMETERS
DISDIR: TDZA B,B ;TURN OFF THE PARAMETER
ENADIR: MOVEI B,1 ;TURN ON THE OPTION
MOVEI A,.SFCRD ;GET FUNCTION CODE
SMON ;TELL THE MONITOR
RET ;RETURN
; HERE TO ENABLE ACCOUNT VALIDATION
DISACT: TDZA B,B ;TURN OFF ACCOUNT VALIDATION
ENACCT: MOVEI B,1 ;TURN ON ACCOUNT VALIDATION
MOVEI A,.SFAVR ;GET THE FUNCTION CODE
SMON ;TELL THE MONITOR
RET ;RETURN
; HERE TO ENABLE/DISABLE FULL LATENCY OPTIMIZATION
DISFLO: TDZA B,B ;TURN OFF FULL LATENCY OPTIMIZATION
ENAFLO: MOVEI B,1 ;TURN ON FULL LATENCY OPTIMIZATION
MOVEI A,.SFFLO ;GET THE SMON FUNCTION CODE
SMON ;SET THE DESIRED STATE
RET ;AND RETURN
;Here to disable CTY output of system error messages
J0OUTD: TDZA B,B ;FOR THE DISABLE
J0OUTE: MOVEI B,1 ;FOR THE ENABLE
MOVEI A,.SFBGS ;THE BIT TO DO
SMON ;DO IT
RET ;AND DONE
; HERE TO ENABLE TAPE-DRIVE-ALLOCATION
ENATDA: MOVEI B,1 ;TURN ON TAPE DRIVE ALLOCATION
MOVEI A,.SFMTA ;GET SMON SUNCTION CODE
SMON
RET
; HERE TO ENABLE/DISABLE WORKING SET PRELOADING
DISWSP: TDZA B,B
ENAWSP: MOVEI B,1
MOVEI A,.SFWSP
SMON
RET
; HERE TO DISABLE FAST LOGIN OPTION FOR THE EXEC
DISFST: MOVEI A,.SFXEC ;GET EXEC FLAGS WORD
TMON
TXO B,XC%FST ;DON'T ALLOW FAST LOGINS
SMON
RET
; HERE TO ENABLE FAST LOGIN OPTION FOR THE EXEC
ENAFST: MOVEI A,.SFXEC ;GET EXEC FLAGS WORD
TMON
TXZ B,XC%FST ;ALLOW FAST LOGINS
SMON
RET
; HERE TO ENABLE/DISABLE HANGUP IF NOT LOGGED IN
DISHLO: TDZA B,B
ENAHLO: MOVEI B,1
MOVEI A,.SFHU0
SMON
RET
; HERE TO ENABLE/DISABLE HANGUP IF LOGGED IN
DISHLI: TDZA B,B
ENAHLI: MOVEI B,1
MOVEI A,.SFHU1
SMON
RET
; HERE TO ENABLE/DISABLE SYSTEM MESSAGE LEVEL 0
DISLV0: TDZA B,B ;TURN IT OFF
ENALV0: MOVEI B,1 ;TURN IT ON
MOVEI A,.SFMS0 ;GET THE FUNCTION CODE
SMON% ;CHANGE IT
RET ;AND RETURN
; HERE TO ENABLE/DISABLE SYSTEM MESSAGE LEVEL 1
DISLV1: TDZA B,B ;TURN IT OFF
ENALV1: MOVEI B,1 ;TURN IT ON
MOVEI A,.SFMS1 ;GET THE FUNCTION CODE
SMON% ;CHANGE IT
RET ;AND RETURN
;TURN DAYLIGHT SAVING TIME ON/OFF/AUTO
DAYLIG: NOISE <MODE IS>
MOVEI A,[FLDDB. .CMKEY,,DSTOPT] ;setup function block
CALL RFIELD ;get option
HRRZ B,(B) ;RH of table word
CONFRM ;get confirmation
MOVEI A,.SFDST ;set DST function
SMON ;do it
ERJMP DSTERR ;something went wrong, go write message
RET ;ok, return
DSTERR: TMSG <
?Unable to set DST switch because: > ;write start of message
MOVEI A,.PRIOU ;to TTY:
HRLOI B,.FHSLF ;me
SETZM C ;no byte count
ERSTR ;write error message
ERJMP .+2 ;error, continue
ERJMP .+1 ;error, continue
RET ;return
; SET LAT-STATE ON OR OFF
LAT: NOISE <STATE IS>
MOVEI A,[FLDDB. .CMKEY,,LATSTA] ;setup function block
CALL RFIELD ;get option
HRRZ B,(B) ;RH of table word
CONFRM ;get confirmation
MOVEI A,.SFLTS ;Set LAT-STATE
SMON
ERJMP LATERR ;Something went wrong - print msg
RET ;Ok
LATERR: TMSG <
?Unable to set LAT STATE because: > ;write start of message
MOVEI A,.PRIOU ;to TTY:
HRLOI B,.FHSLF ;me
SETZM C ;no byte count
ERSTR ;write error message
ERJMP .+2 ;error, continue
ERJMP .+1 ;error, continue
RET ;return
RET ;ok, return
SYLVL0:
;DEFINE A LOGICAL NAME
DEFINE: STKVAR <LNPTR>
NOISE <SYSTEM LOGICAL NAME>
MOVEI A,[FLDDB. .CMDEV,CM%PO!CM%SDH,,<global logical name being defined>]
CALL RFIELD ;READ THE NAME
CALL BUFFF ;GET POINTER TO NAME
MOVEM A,LNPTR ;REMEMBER POINTER TO NAME
NOISE <AS>
MOVEI A,[FLDDB. .CMTXT,CM%SDH,,<logical name definition>]
CALL CFIELD
CALL BUFFF ;GET POINTER TO DEFINITION STRING
MOVE C,A ;NEW NAME IN C
MOVEI A,.CLNSY ;SAY GLOBAL
MOVE B,LNPTR ;GET LOGICAL NAME
CRLNM
JRST [ TMSG <
*****************
? SETSPD: Failed to define logical name >
MOVE A,LNPTR ;GET POINTER TO NAME
PSOUT ;OUTPUT IT
TMSG <
*****************
>
JRST CMDERR] ;GO SAY WHY AND GET MORE COMMANDS
RET
;SET LOCAL TIME ZONE; IT MUST BE A NUMBER FROM -12 TO 12
TIMZON: MOVEI A,[FLDDB. .CMNUM,CM%SDH,5+5,<timezone number>]
CALL CFIELD ;GET NUMBER AND CONFIRMATION
MOVM D,B ;CHECK IT FOR RANGE
CAILE D,^D12 ;MUST BE FROM -12 TO 12 DECIMAL
COMERR <Timezone must be -12 to 12 inclusive>
MOVEI A,.SFTMZ ;SET TIME ZONE
SMON ;ARGUMENT IN B
ERJMP TZERR
RET ;DONE
;ATTEMPT TO SET TIME ZONE FAILED
TZERR: TMSG <
*****************
? SETSPD: Unable to set time zone because:
>
GENERR: MOVEI A,.PRIOU ;TYPE OUT MONITOR ERROR
HRLOI B,.FHSLF ; FOR THIS FORK
ERSTR
JFCL
JFCL
TMSG <
*****************
>
JRST CMDER1 ;ON TO NEXT LINE
;SET LOCAL HOST NUMBER OF AN ARPANET SITE
HOST: MOVEI A,[FLDDB. .CMNUM,CM%SDH,8,<local ARPAnet host number>]
CALL CFIELD ;READ NUMBER AND CONFRIMATION
MOVEI A,.SFLHN ;SET LOCAL HOST NUMBER
SMON
ERJMP HSTERR ;FAILED?
RET ;DONE
HSTERR: TMSG <
*****************
? SETSPD: Unable to set ARPANET site address because:
>
JRST GENERR
ARCHIV: MOVEI A,[FLDDB. .CMNUM,CM%SDH,5+5,<number of days for archive tape recycle period>]
CALL CFIELD
MOVEI A,.SFACY ; SET ARCHIVE TAPE RECYCLE PERIOD
SMON
ERJMP ARCERR ;FAILED?
RET
ARCERR: TMSG <
*****************
? SETSPD: Unable to set archive tape recycle period because:
>
JRST GENERR
TAPRCY: MOVEI A,[FLDDB. .CMNUM,CM%SDH,5+5,<number of days for tape recycle period>]
CALL CFIELD
MOVEI A,.SFMCY ; SET TAPE RECYCLE PERIOD
SMON
ERJMP TAPERR ;FAILED?
RET
TAPERR: TMSG <
*****************
? SETSPD: Unable to set tape recycle period because:
>
JRST GENERR
;COMMAND TO DECLARE DECNET NODE NAME
NODNAM: STKVAR <LNNAME,ARENUM>
MOVEI A,[FLDDB. .CMFLD,CM%SDH,,<local node name>]
CALL RFIELD ;READ NODE NAME
CALL BUFFF ;GET POINTER TO ASCIZ STRING
MOVEM A,LNNAME ;REMEMBER POINTER TO NAME
MOVEI A,[ FLDDB. .CMCFM,,,,,[
FLDDB. .CMNUM,CM%SDH,5+5,<area.node>]]
CALL RFIELD ;GET CONFIRMATION OR NODE NUMBER
MOVEI D,0 ;FIRST ASSUME NO NUMBER
LOAD C,CM%FNC,.CMFNP(C) ;SEE WHAT WAS TYPED
CAIN C,.CMCFM ;CONFIRMATION ONLY?
JRST NODNA2 ;YES, NO NUMBER
MOVEM B,ARENUM ;Save what we believe is the area number
MOVEI A,[ FLDDB. .CMCFM,,,,,[
FLDDB. .CMTOK,,<-1,,[ASCIZ /./]>]]
CALL RFIELD ;Get confirmation or area dot
LOAD C,CM%FNC,.CMFNP(C) ;See what we got
CAIE C,.CMCFM ;Confirm?
IFSKP. ; -yes,
MOVE D,ARENUM ; Retrieve node number (no area specified)
JRST NODNA2 ; and go process
ENDIF. ;Come here if a dot was given
MOVEI A,[ FLDDB. .CMNUM,CM%SDH,5+5,<node number>]
CALL RFIELD ;Get node number
MOVE D,ARENUM ;Get area number
LSH D,^D10 ;Shift it into position
IOR D,B ; and put in node number
CONFRM ;Confirm
NODNA2: IFN. D ;IF NO NUMBER, GO ON
MOVEI A,.NDSNM ;SET NODE NUMBER
MOVEI B,D ;WHERE THE NUMBER IS
NODE ;SET IT
ERJMP [ MOVX T1,.FHSLF ;Fork handle
GETER% ;Get last error
HRRZS T2 ;Keep error only
CAIN T2,NODX16 ;DECNET already initialized?
RET ; -yes, we're probably running because of CFE
; reload
TMSG <*****************
? SETSPD: couldn't set node number - >
JSERR ;SAY WHY
TMSG <
*****************
>
RET]
ENDIF.
MOVEI A,.NDSLN ;WANT TO SET NODE NAME
MOVEI B,C ;ARG BLOCK
MOVE C,LNNAME ;GET POINTER TO NODE NAME
NODE ;DO IT
ERJMP [ TMSG <*****************
? SETSPD: couldn't set node name - >
JSERR ;SAY WHY
TMSG <
*****************
>
RET]
RET
;DECNET command - set initial DECnet parameters
;
; Command format:
; DECNET BUFFER-SIZE <value>
; DECNET DEFAULT-BUFFERS-PER-LINK <value>
; DECNET DEFAULT-FLOW-CONTROL NONE | SEGMENT
; DECNET MAXIMUM-ADDRESS <value>
; DECNET MAXIMUM-BUFFER <value>
; DECNET ROUTER-ENDNODE <value>
; DECNET ROUTER-LEVEL-1 <value>
DECNET: SAVEAC <P1,P2>
MOVEI T1,[FLDDB. .CMKEY,,DCNTA0]
CALL RFIELD ;Get DECNET option
MOVE A,(B) ;Table word
HLRZ P1,(A) ;Get parameter number
HRRZ T1,(A) ;Get processing address
CALL (A) ;Process, return value to set in T2
CONFRM ;Confirm
MOVE P2,T2 ;Get value to set
MOVEI T1,.NDSDP ;Set DECnet parameter
MOVEI T2,P1 ;Point to argument block (P1-P2)
NODE% ;Do it
ERJMP [ MOVX T1,.FHSLF ;Fork handle
GETER% ;Get most recent error
HRRZS T2 ;Keep error code only
CAIN T2,NODX16 ;DECNET already initialized?
RET ; -yes, probably CFE reload - ignore
TMSG <
*****************
? SETSPD: Failed to set DECnet parameter because:
>
JRST GENERR]
RET ;Done with command
;Read a decimal number, return value in T2
DCNNUM: MOVEI T1,[FLDDB. .CMNUM,,5+5]
CALL RFIELD
RET
;ROULV1 - routing level 1
;ROUEND - routing endnode
ROULV1: SKIPA T2,[RNT.L1]
ROUEND: MOVEI T2,RNT.NR
RET
;NSPFLO - read flow control option
NSPFLO: MOVEI T1,[FLDDB. .CMKEY,,FLOTAB]
CALL RFIELD
MOVE A,(B)
MOVE T2,(A) ;Get flow value (FCM.NO or FCM.SG)
RET
; "ETHERNET" COMMAND -- SET ETHERNET ADDRESS FOR A GIVEN CHANNEL
;
; COMMAND FORMAT:
; ETHERNET (CHANNEL NUMBER) <channel #> (ADDRESS) <Hex address string>
; OR: ETHERNET (CHANNEL NUMBER) <channel #> (ADDRESS) DECNET
;
; Where "Hex address string" is a string of six hexadecimal numbers seperated
; by dashes ('-'). If the keyword 'DECNET' is used (must be spelled out in
; full) the address generated will be the appropriate address for a DECnet
; node on the Ethernet.
ETHERN: SAVEAC <P1,P2>
MOVEI A,[FLDDB. .CMNUM,CM%SDH,^D10,<Channel number>]
CALL RFIELD ; Read the channel number
MOVE P1,B ; Put it in a safe place (I hope)
MOVEI A,[FLDDB. .CMKEY,,DNTABL]
CALL RFLDE ; Look for the keyword "DECNET"
JRST GETADR ; No such luck, search for a normal address
CONFRM ; Finish up the line
MOVEI A,.NDGNM ; Get the current node number
MOVEI B,C ; Put it in C
SETZ C, ; Clear C in case of error
NODE%
ERJMP .+1 ; Ignore errors
JUMPE C,[TMSG <
*****************
? SETSPD: Could not set DECnet address for Ethernet channel >
MOVEI A,.PRIOU ; Prepare to
MOVE B,P1 ; output
MOVEI C,^D10 ; the channel number
NOUT%
ERJMP .+1
TMSG < because DECnet address is not set
*****************
>
JRST CMDER1]
MOVEI A,.SFSEA ; Function is "Set Ethernet Address"
MOVE B,P1 ; Get channel number into B
SETO C, ; Indicate we want the DECnet address
SMON% ; Set the DECnet Ethernet address
RET
GETADR: CALL RNIADR ; Read the NI address
SETADR: MOVE C,P1 ; Get channel number
DMOVE P1,A ; Put address in a safe place
MOVEI A,.SFSEA ; Function is "Set Ethernet Address"
MOVE B,C ; Channel number must be in B
MOVE C,[POINT 8,P1] ; Get pointer to address
SMON% ; Set the Ethernet address
RET
DEFINE BADSTR (string)<[EXP CM%FW+CM%NOR+CM%INV,ASCIZ |string|],,0>
DNTABL: DNTLEN,,DNTLEN
BADSTR D ; Don't allow substrings which could
BADSTR DE ; be valid Ethernet addresses
T DECNET,0
DNTLEN==.-DNTABL-1
; Here to read an Ethernet address of the form xx-xx-xx-xx-xx-xx. Where
; xx is a hex number in the range of 0 to FF inclusive.
RNIADR: SAVEAC P1 ; Allocate an AC for source byte pointer
TRVAR <<ADDR,2>> ; Allocate space for address
MOVEI A,[FLDDB. .CMFLD,CM%SDH,,<Hexadecimal Ethernet Address>]
CALL CFIELD ; Read the text and confirmation
MOVE P1,[POINT 7,ATMBUF]; Get pointer to parsed text
MOVE C,[POINT 8,ADDR] ; Get pointer to destination
MOVEI D,6 ; We should go through here a max of 6 times
JRST RNIAD2 ; Enter loop at the right point
RNIAD1: CAIE B,"-" ; Followed by a dash?
JRST BADADR ; Nope, tell the user
RNIAD2: CALL HEXIN ; Read a hex number
JUMPL A,BADHEX ; If negative, probably overflowed
CAILE A,^D255 ; Is it more than 8 bits?
JRST BADHEX ; Yes, bad hex byte
IDPB A,C ; Accumulate the Ethernet address
SOJG D,RNIAD1 ; Loop for all six numbers
DMOVE A,ADDR ; Get address into A and B
RET
BADADR: TMSG <
*****************
? SETSPD: Illegal character ">
MOVE A,B ; Get naughty character
PBOUT ; Throw it out
TMSG <" in Ethernet address
*****************
>
JRST CMDER1
BADHEX: TMSG <
*****************
? SETSPD: Illegal Hexadecimal byte in Ethernet address
*****************
>
JRST CMDER1
HEXIN: SETZ A, ; Clear the number holder
HEXIN2: ILDB B,P1 ; Get a byte from the source string
CAIL B,"a" ; Less than "a"?
CAILE B,"z" ; Or greater than "z"?
SKIPA ; Yes to either, not lowercase
SUBI B,"a"-"A" ; Nope, upper caseify it
CAIL B,"0" ; Less than "0"?
CAILE B,"9" ; Or greater than "9"?
SKIPA ; Yes to either, check further
JRST HEXIN1 ; Nope, we have a valid digit
CAIL B,"A" ; Less than "A"?
CAILE B,"F" ; Or greater than "F"?
RET ; Yes to either, it's not hex
SUBI B,"A"-"9"-1 ; Hexamize the character
HEXIN1: SUBI B,"0" ; Turn it into an integer
LSH A,4 ; Make room for the new digit
IOR A,B ; Bring in the new digit
JRST HEXIN2 ; And look for more
; "CHANGE" COMMAND -- SET ACCOUNTING SHIFT TIMES
;
; COMMAND FORMAT:
; CHANGE (ACCOUNT SHIFT AT) <TIME> (ON) <DAYS-OF-WEEK>
CHANGE: MOVEI A,[FLDDB. .CMTAD,CM%SDH,CM%ITM!CM%NCI!DATBLK,<time of day at which accounting shift is to occur>]
CALL RFIELD ;READ TIME
HRRZ P1,DATBLK+2 ;STORE TIME, INIT LEFT HALF TO NO DAYS
MOVEI A,[FLDDB. .CMCFM,,,<confirm now to assume all days, or enter specific days of week>]
CALL RFLDE ;END OF LINE NOW?
CAIA ;NO
JRST CHANG7 ;YES, ASSUME ALL DAYS
CHANG2: MOVEI A,[FLDDB. .CMKEY,,DOWTAB,<day of the week on which accounting shift is to occur>]
CALL RFIELD ;READ DAY OF THE WEEK
HRLZ A,(B) ;GET DAY-OF-WEEK BITS FROM TABLE TO LH
TDO P1,A ;SET SELECTED DAYS
MOVEI A,[FLDDB. .CMCFM,,,,,[
FLDDB. .CMCMA]]
CALL RFIELD ;GET CONFIRMATION OR COMMA
LOAD D,CM%FNC,.CMFNP(C) ;SEE WHICH
CAIN D,.CMCMA ;MORE DAYS FOLLOWING?
JRST CHANG2 ;YES, GO READ THEM
JRST CHANG8 ;NO, CONFIRMATION, SO WE'RE DONE
CHANG7:
TXO P1,1B0!1B1!1B2!1B3!1B4!1B5!1B6 ;ASSUME ALL DAYS OF WEEK
CHANG8:
MOVEI T1,ASCTBZ ;GET SIZE OF TABLE
HRRZM T1,ASCTBL ;STORE AS MAX TABLE SIZE
MOVX T1,.USRAS ;READ ACCOUNTING SHIFTS
MOVEI T2,ASCTBL ; INTO ASCTBL
USAGE ; . . .
ERCAL [JSERR
RET]
HLRZ T1,ASCTBL ;GET CURRENT SIZE OF TABLE
ADDI T1,1 ;BUMP BY ONE
HRLM T1,ASCTBL ;STORE NEW SIZE
MOVEM P1,ASCTBL(T1) ;STORE NEW ENTRY
MOVX T1,.USSAS ;SET ACCOUNTING SHIFTS
USAGE
ERCAL [JSERR
RET]
RET
; ROUTINE TO LOAD A RAM OR VFU
LPTLOD: STKVAR <LODUNI,LODFNC,LODJFN,LPTJFN>
SETZM LODJFN ;INIT THIS TO ZERO
MOVEI A,[FLDDB. .CMNUM,CM%SDH,8,<lineprinter unit number>]
CALL RFIELD ;READ UNIT NUMBER
MOVEM B,LODUNI ;SAVE LPT UNIT NUMBER
; SEE IF RAM OR VFU IS TO BE LOADED
LPLD20: MOVEI A,[FLDDB. .CMKEY,,LPTTAB]
CALL RFIELD ;SEE WHICH IS BEING LOADED
HRRZ A,(B) ;GET FUNCTION TO PERFORM
CAIN A,.MOSTS ;SET STATUS FUNCTION (DECLARE LOWER CASE LPT) ?
JRST [ MOVE T2,LODUNI ;YES, GET THE UNIT NUMBER
SETOM LODLCP(T2) ;FLAG THAT PRINTER SHOULD BE LOWER CASE
JRST LPLD20 ] ;GO GET NEXT ARGUMENT
MOVEM A,LODFNC ;SAVE DESIRED FUNCTION (MTOPR CODE)
; READ FILENAME TO BE LOADED AND GET A JFN FOR IT
MOVEI A,[FLDDB. .CMIFI,CM%SDH,,<name of ram or vfu file>]
CALL CFIELD ;GET FILENAME AND CONFIRMATION
MOVEM B,LODJFN ;SAVE JFN
; OPEN THE PRINTER AND VERIFY THAT NO RAM OR VFU IS NOW LOADED
HRROI A,FILNAM ;GET POINTER TO WHERE DEVICE STRING GOES
MOVSI B,600007 ;GET LPT DEVICE DESIGNATOR
HRR B,LODUNI ;GET UNIT NUMBER
DEVST ;GET DEVICE NAME STRING
JRST LODERR ;FAILED
MOVEI B,":" ;GET TERMINATOR FOR GTJFN
IDPB B,A ;TERMINATE DEVICE NAME
SETZ B,
IDPB B,A ;TIE IT OFF
MOVX A,GJ%SHT!GJ%FOU ;SHORT CALL, FOR OUTPUT USE
HRROI B,FILNAM ;GET POINTER TO DEVICE NAME
GTJFN ;GET A JFN FOR THE PRINTER
JRST ENDLPT ;ALREADY ASSIGNED
MOVEM A,LPTJFN ;SAVE LPT JFN
MOVX B,<FLD(7,OF%BSZ)+OF%WR> ;OPEN FOR WRITE
OPENF ;OPEN THE PRINTER
JRST [ EXCH A,LPTJFN ;MUST BE OPEN ALREADY, GET BACK JFN
RLJFN ;RELEASE THE JFN
JFCL ;IGNORE ERRORS HERE
MOVE A,LPTJFN ;GET BACK ERROR CODE
CAIE A,OPNX9 ;ALREADY OPENED BY SOMEONE?
JRST LODANY ;NO. LOAD ANYWAY
JRST ENDLPT ] ;GO ON TO NEXT COMMAND
MOVEI B,.MOPSI ;GET OFF-LINE INTS
MOVEI C,P1 ;SET UP ARGS IN REGISTERS
MOVEI P1,3 ;3 WORDS
MOVEI P2,.ICLPO ;LINE PRINTER OFFLINE CHANNEL
SETZ P3, ;NO FLAGS
MTOPR ;DO IT
ERJMP .+1 ;IN CASE SOMETHING TERRIBLE HAPPENED
GDSTS ;GET CURRENT STATUS
TXZ B,MO%LVU!MO%LCP!MO%EOF ;TURN OFF CONDITION BITS
JUMPN B,INERR ;IF AN ERROR, PUNT IT
MOVEI B,14 ;IF NO ERROR, ALIGN FORMS
BOUT ;DO IT
ERJMP .+1 ;IGNORE FAILURE
INERR: DMOVE B,[-1,,FILNAM
5*^D28] ;ARGS
DMOVEM B,MTBLK+1 ;TO ARG BLOCK
MOVE C,LODFNC ;GET FUNCTION TO PERFORM
MOVX B,.MORTR ;GET READ-RAM FUNCTION CODE
CAIE C,.MOLTR ;ARE WE LOADING THE RAM ?
MOVX B,.MORVF ;NO, GET READ-VFU FUNTION
MOVEI C,MTBLK ;GET ADDRESS OF BLOCK
SETZM FILNAM ;MAKE IT LOOK AS IF IT IS NOT LOADED
MTOPR ;READ FILENAME ALREADY LOADED
ERJMP .+1 ;UNEXPECTED ERROR. LOAD RAM ANYWAY
MOVE A,LPTJFN ;GET JFN FOR PRINTER
CLOSF ;CLOSE THE FILE
FCLOSE: JRST [ MOVE A,LPTJFN ;FAILED. GET JFN AGAIN
TXO A,CZ%ABT ;DO IT NOW WITH ABORT
CLOSF ;DO IT
JFCL ;HAS TO WORK
JRST .+1] ;ALL DONE
LDB A,[POINT 7,FILNAM,6] ;GET FIRST BYTE RETURNED
JUMPN A,ENDLPT ;IF NOT-NULL, GO ON TO NEXT COMMAND
; GET JFN, FUNCTION, AND UNIT # AND LOAD THE RAM OR VFU
LODANY: MOVE B,LODFNC ;GET FUNCTION TO BE PERFORMED
MOVE A,LODJFN
MOVE C,LODUNI ;GET UNIT NUMBER OF PRINTER
SKIPE LODLCP(C) ;IS THIS PRINTER LOWER CASE ?
TXO B,MO%LCP ;YES, MARK THAT PRINTER IS LOWER CASE
LPINI ;LOAD RAM OR VFU
ERJMP LODERR ;ERROR - TELL SOMEONE
; HERE TO FINISH UP AND GO DO NEXT COMMAND
ENDLPT: RET
; HERE ON AN ERROR LOADING THE RAM OR VFU
LODERR: TMSG <
*****************
? SETSPD: Could not load the >
HRROI A,[ASCIZ/VFU/] ;GET TEXT
MOVE B,LODFNC ;GET FUNCTION BEING PERFORMED
CAIE B,.MOLVF ;ARE WE LOADING THE VFU ?
HRROI A,[ASCIZ/RAM/] ;NO, GET RAM TEXT
PSOUT ;TELL USER WHAT WE ARE LOADING
TMSG < for PLPT> ;GET UNIT NAME
MOVEI A,.PRIOU ;GET PRIMARY OUTPUT JFN
MOVE B,LODUNI ;GET UNIT NUMBER
MOVEI C,^D8 ;GET OCTAL RADIX
NOUT ;OUTPUT THE UNIT NUMBER
JFCL ;IGNORE ERRORS HERE
TMSG <
*****************
> ;END OF MESSAGE
SKIPE A,LODJFN ;GET JFN FOR FILE TO HAVE BEEN LOADED
CLOSF ;MAKE SURE IT IS REALLY CLOSED AND RELEASED
JFCL ;PROBABLY CLOSED BY MONITOR ALREADY ANYHOW
JRST ENDLPT ;GO FINISH UP
;LPT OFF-LINE INTERRUPT ROUTINE
LPTINT: MOVEI A,@FCLOSE ;REDIRECT CODE TO CLOSE AND ABORT DEVICE
MOVEM A,PCLEV1 ;ZAP THE OLD PC WORD
DEBRK ;AND GO FINISH UP
;CHANNEL ONE INTERRUPT ROUTINE. INVOKED WHEN TIMER HAS EXPIRED.
HNGCON: BLOCK 1 ;CONTINUATION ADDRESS IF HUNG
HNGSTK: BLOCK 1 ;STACK POINTER WHEN SETSPD HANGS
NCMDS: BLOCK 1 ;NUMBER OF COMMANDS PROCESSED
HUNG: HRROI T1,[ASCIZ/%SETSPD Hung on command line /]
PSOUT
MOVEI T1,.PRIOU ;OUTPUT TO PRIMARY DESIGNATOR
MOVE T2,NCMDS ;GET THE COMMAND LINE NUMBER THAT IS HUNG
MOVEI T3,^D10 ;OUTPUT IN DECIMAL
NOUT
JSERR
HRROI T1,[ASCIZ/ - Continuing with next command...
/]
PSOUT ;OUTPUT MORE OF MESSAGE
MOVE T2,HNGCON ;GET CONTINUATION ADDRESS
TXO T2,UMODF ;SET USER FLAG OF PC
MOVEM T2,PCLEV2 ;AND CHANGE PROCESS PC TO CONTINUE
MOVE P,HNGSTK ;GET BACK LAST PRESERVED STACK
DEBRK
;ROUTINES FOR SCHEDULER CONTROLS
;SET BIAS-CONTROL VALUE
BIAS: MOVEI A,[FLDDB. .CMNUM,CM%SDH,5+5,<value for bias control knob>]
CALL CFIELD ;READ VALUE AND CONFIRMATION
MOVE T4,T2 ;COPY NUMBER
MOVEI T1,.SKSBC ;SET BIAS CONTROL
MOVEI T2,T3 ;ARG BLOCK
MOVEI T3,2 ;LENGTH OF BLOCK
SKED% ;SET IT
ERJMP [EMSG <Invalid value for bias control setting>
JRST CMDER1]
RET
;SET BATCH BACKGROUND
BATBGD: CONFRM ;MAKE SURE HE MEANS IT
MOVEI T1,.SKBBG ;GET PROPER FUNCTION
SETZM T2 ;NO ARGS
SKED% ;SET IT
ERCAL [ EMSG <Could not set BATCH-BACKGROUND>
RET]
RET
;SCHEDULER CONTROLS COMMANDS CONTINUED
;CREATE A CLASS. WILL DO NOTHING IF CLASS SCHEDULER NOW ON.
CREATE: MOVX T1,.SKRCV ;READ CLASS PARAMETERS
MOVEI T2,T3
MOVEI T3,2
SKED% ;READ OUT CLASS PARAMETERS
ERJMP [ JSERR
JRST CMDER1] ;ERROR OF SOME SORT
TXNN T4,SK%STP ;NOW ON?
JRST CMDER1 ;YES. GO AWAY QUIETLY THEN
;CLASS SCHEDULING NOW OFF. SET THE CLASS SHARE
MOVEI A,[FLDDB. .CMNUM,CM%SDH,5+5,<class number>]
CALL RFIELD
MOVEM T2,CLSBLK+1 ;SAVE CLASS
MOVEI A,[FLDDB. .CMFLT,CM%SDH,,<percentage of machine to allot to class>]
CALL CFIELD
MOVEM T2,CLSBLK+2 ;SAVE %
MOVEI T2,CLSBLK
MOVEI T1,.SKSCS ;PROPER FUNCTION
SKED% ;DO IT
ERJMP [ TMSG <
*****************
? SETSPD: Could not CREATE class: >
JSERR
TMSG <
*****************
>
RET]
RET
;MORE SCHEDULER COMMANDS
;ENABLE CLASS-SCHEDULING. GOT TO HERE FROM ENABLE COMMAND
ECSKED: MOVEI T1,.SKRCV ;READ CLASS VALUES
MOVEI T2,T3
MOVEI T3,2
SKED% ;READ VALUES
ERJMP CMDERR
TXNN T4,SK%STP ;NOW ON?
JRST CMDER1 ;YES. SKIP IT THEN
;CLASS SCHEDULER NOW OFF.
MOVEI A,[FLDDB. .CMKEY,,SKDOPT]
CALL RFIELD ;GET OPTION
HRRZ A,0(B) ;GET VALUE
MOVX T4,SK%ACT ;ASSUME BY ACCOUNT
SKIPE A ;IS IT?
TXZ T4,SK%ACT ;NO
MOVEI A,[FLDDB. .CMKEY,,SKDOP0,,<ALLOCATED>]
CALL CFIELD ;DEFAULT TO ALLOCATED
HRRZ A,0(B) ;GET VALUE
SKIPE A ;WANT TO WITHHOLD?
TXO T4,SK%WDF ;YES
MOVEI T1,.SKICS
MOVEI T2,T3
MOVEI T3,2 ;COUNT
SKED% ;START UP CLASS SCHEDULER
ERJMP [JSERR ;ERROR
RET]
RET
;SET BATCH CLASS
BCHCLS: MOVEI A,[FLDDB. .CMNUM,CM%SDH,5+5,<class number for running all batch jobs in>]
CALL CFIELD
MOVE T4,T2 ;COPY VALUE
MOVEI T3,2 ;ARG BLOCK
MOVEI T1,.SKBCS ;SET BATCH CLASS
MOVEI T2,T3 ;POINT TO ARG BLOCK
SKED% ;DO IT
ERJMP [EMSG <Could not set BATCH-CLASS>
JSERR
RET]
RET
;ENTRY POINT FOR PROCESSING CRASH DUMPS
START3: MOVE P,[IOWD PDLEN,PDL] ;SET UP PUSH DOWN LIST
CALL INIT ;SET UP PSI, CAPABILITIES, ETC.
CALL QUEBLK
HALTF%
HALTF%
; QUEBLK - COPY DUMP.EXE TO DUMP.CPY AND LOG ANY UNLOGGED SYSERR
; BLOCKS THAT WERE FOUND IN THE DUMP FILE
; RETURNS +1: ALWAYS
QUEBLK: MOVE T1,[SIXBIT /DBUGSW/] ;CHECK ON STATE OF SYSTEM
SYSGT ;READ DBUGSW
SKIPE T2 ;FOUND IT?
CAIGE T1,2 ;YES. IS IT STAND-ALONE?
SKIPA ;NO. DO THE DUMP
IFN 0,<
CALLRET SETCNT ;STILL TRY TO SET SPEAR COUNT
> ;REMOVAL OF SPRCNT CODE.
RET ;YES, DO NOT PROCESS DUMPS
TRVAR <QUEJFN,QUEFRK,QUEPGS>
SETZ T1, ;GET A FORK TO LOAD DUMP.EXE INTO
CFORK
IFN 0,<
JSYERR (<CFORK% failed on PS:<SYSTEM>DUMP.EXE - >,<CALLRET SETCNT>)
;CFORK ERROR, TRY TO SET COUNT ANYWAY...
> ;REMOVAL OF SPRCNT CODE.
JSYERR (<CFORK% failed on PS:<SYSTEM>DUMP.EXE - >,<RET>)
MOVEM T1,QUEFRK ;SAVE FORK HANDLE
MOVX T1,GJ%OLD!GJ%SHT ;GET A JFN FOR <SYSTEM>DUMP.EXE
HRROI T2,[ASCIZ/PS:<SYSTEM>DUMP.EXE/]
GTJFN
IFN 0,<
IFNSK.
CALL SETCNT ;SET SPEAR COUNTER
NOP ;ERROR, OUR HANDS ARE TIED
> ;REMOVAL OF SPRCNT CODE.
JRST QUEKFK
; ENDIF. ;REMOVAL OF SPRCNT CODE.
MOVEM T1,QUEJFN ;SAVE JFN
MOVE T2,[440000,,OF%RD!OF%WR!OF%THW]
OPENF ;OPEN THE FILE FOR READ/WRITE THAWED
JRST [ MOVE T1,QUEJFN ;FAILED, CLEAN UP
RLJFN
JFCL
IFN 0,<
CALL SETCNT ;TRY TO SET SPEAR COUNTER
NOP
> ;REMOVAL OF SPRCNT CODE.
JRST QUEKFK]
HRLI T1,.FBPRT ;SET THE PROTECTION OF DUMP.EXE TO 770000
MOVEI T2,-1 ;RIGHT HALF PROTECTION BITS
MOVEI T3,770000 ;MUCHO PROTECTION
CHFDB ;THIS FILE MUST BE PROTECTED FOR SECURITY
ERJMP .+1
HRLZ T1,QUEJFN ;NOW MAP IN DIR PAGE
MOVE T2,[.FHSLF,,PG0PG]
MOVX T3,PM%RD!PM%WT ;READ AND WRITE
PMAP
HRRZ T1,PG0ADR ;GET LENGTH OF DIRECTORY BLOCK
HRRZ T2,PG0ADR-2(T1) ;GET STARTING FILE PAGE # OF LAST GROUP
HLRZ T3,PG0ADR-1(T1) ;GET HALFWORD CONTAINING REPEAT COUNT
LSH T3,-9 ;RIGHT JUSTIFY REPEAT COUNT
ADDI T2,1(T3) ;COMPUTE # OF FILE PAGES TO MAP
MOVEM T2,QUEPGS ;SAVE NUMBER FOR CPYDMP
HRRZ T1,PG0ADR ;GET LENGTH OF HEADER BLOCK OF DIR
HLRZ T2,PG0ADR(T1) ;GET CODE OF NEXT BLOCK
CAIE T2,1775 ;ENTRY VECTOR?
JRST QUEROR ;NO, GIVE UP
HRRZ T2,PG0ADR(T1) ;GET LENGTH
CAIGE T2,4 ;CORRECT LENGTH?
JRST QUEROR ;NO, GIVE UP
SKIPE PG0ADR+3(T1) ;ALREADY LOOKED AT THIS DUMP?
JRST QUEROR ;YES, GIVE UP
SETOM PG0ADR+3(T1) ;NO, MARK THAT WE HAVE NOW SEEN IT
SETO T1, ;AND UNMAP THE PAGE
MOVE T2,[.FHSLF,,PG0PG]
SETZ T3,
PMAP
HRRZ T1,QUEJFN ;GET JFN OF ORIGINAL DUMP FILE
MOVE T2,QUEPGS ;GET HIGHEST PAGE NUMBER TO COPY
CALL CPYDMP ;GO COPY THE DUMP FILE
;FALL THROUGH....
;THE COPY IS EITHER DONE OR HAS BEEN DELETED BECAUSE SYSTEM IS
;STAND-ALONE. PROCEED WITH QUEUEING UP THE SYSERR BLOCKS
DMPDON: ;HERE TO QUEUE UP SYSERR BLOCKS
CALL DMPMAP ;MAP THE DUMP FILE
JRST QUEROR ;HANDLE ERRORS
SETZ T1, ;WE WANT PAGE ZERO OF THE DUMP
CALL DMPRED ;READ FROM THE DUMP
JRST QUEROR ;HANDLE ERRORS
IFN 0,<
SKIPE T3,TMPADR+SPRCNT ;GET RUNNING COUNT OF SPEAR ENTRIES
IFSKP. ;IF ZERO, TRY GETTING COUNT FROM ERROR.SYS
TMSG <
*****************
% SETSPD: SPEAR entry count = 0 in SYSTEM:DUMP.EXE, resynching from ERROR.SYS
*****************
>
CALL SETCNT
NOP ;FAILURE RETURN
ELSE.
MOVEI T2,(T3) ;GET COUNT
MOVEI T1,.SFSPR ;GET FUNCTION CODE FOR SMON%
SMON% ;ADD OLD COUNT INTO CURRENT COPY OF MONITOR
JSYERR (<SMON% failed to set SPEAR error counter - >,<>)
ENDIF.
>; REMOVAL OF SPRCNT CODE.
SKIPG P1,TMPADR+SEBQOU ;IS THIS ANYTHING IN THE QUEUE
JRST QUEDN1 ;NO
QUELOP:
MOVE P2,P1 ;GET ADDRESS OF NEXT BLOCK
ANDI P2,777 ;GET LOW ORDER BITS ONLY
MOVE T1,P1 ;NOW MAP IN THE PAGE WITH THE BLOCK
LSH T1,-PGSFT ;CONVERT TO A PAGE NUMBER
CALL DMPRED ;READ A PAGE FROM THE DUMP
JRST QUEDON ;HANDLER ERRORS
MOVEI T1,TMPADR(P2) ;GET ADDRESS OF START OF BLOCK
LOAD T2,SEBSIZ,(T1) ;GET SIZE OF BLOCK
ADDI T1,SEBHED ;DONT STORE HEADER
SUBI T2,SEBHED
SOS T2
DMOVE T3,0(T1) ;GET FIRST TWO WORDS
DMOVEM T3,SYSERR
DMOVE T3,2(T1) ;AND THE NEXT TWO WORDS
DMOVEM T3,SYSERR+2
MOVE T3,T1
ADDI T3,5 ;POINT PAST THE HEADER
MOVSS T3,T3 ;LEFT HALF FOR BLT
HRRI T3,SYSERR+4 ;SET RIGHT HALF
BLT T3,SYSERR-5(T2)
MOVEI T1,SYSERR
SYERR ;PUT THIS BLOCK INTO ERROR LOG
ERJMP .+1 ;IGNORE ERRORS
MOVE P1,TMPADR(P2) ;GET ADDRESS OF NEXT BLOCK
JUMPN P1,QUELOP ;IF ONE THERE, GO PROCESS IT
QUEDN1:
MOVE T1,[SIXBIT /APRID/] ;GET APRID OF PROCESSOR
SYSGT ;TO DETERMINE KS10
CAIG T1,^D4096 ;IF GT 4096. THEN KS12
JRST QUEDON ;NO -- DON'T NEED HSB
SETZ T1, ;PAGE ZERO
CALL DMPRED ;READ IN A DUMP FILE
JRST QUEDON ;HANDLE ERRORS
MOVEI T1,SEC%HS ;SET UP LOGGING CODE
STOR T1,SEBERC
DMOVE T1,TMPADR ;GET FIRST TWO WORDS OF DUMP (PHYSICAL 0,1
DMOVEM T1,HS%COD+4+HSBBUF ;STORE IN BUFFER
MOVE T1,[-HS%HSZ,,HS%HDZ] ;POINTER TO BUFFER
MOVEM T1,HS%PTR+4+HSBBUF ;BUFFER
MOVE T1,[PG0ADR+HSBADR,,HSBBUF+4+HS%HDZ] ;MOVE TO BUFFER
BLT T1,HSBBUF+4+HS%HSZ ;BLT LOW CORE DATA
MOVEI T1,HSBBUF ;SYSERR OUTPUT BUFFER
MOVEI T2,HS%LEN
SYERR ;OUTPUT ERROR
ERJMP QUEDON ;IGNORE ERRORS
QUEROR:
; CALL SETCNT ;SET COUNT ;REMOVE SPRCNT CODE.
JFCL ;IGNORE FAILURE
QUEDON: SETO T1, ;FIRST UNMAP PAGES
MOVE T2,[.FHSLF,,PG0PG] ;DO PAGE 0
SETZ T3,
PMAP
MOVE T2,[.FHSLF,,TMPPG] ;AND TEMP PAGES
MOVX T3,PM%CNT+2
PMAP
MOVX T2,<.FHSLF,,MMPPG> ;AND MMAP PAGE
SETZ T3,
PMAP
HRRZ T1,QUEJFN ;SEE IF THERE IS A JFN STILL AROUND
JUMPE T1,QUEKFK
CLOSF ;YES, CLOSE IT
JFCL
QUEKFK: MOVE T1,QUEFRK ;NOW KILL THE FORK
KFORK
RET ;ALL DONE
IFN 0,<
;;SETCNT - Called when the running count of SPEAR entries is not found
; in DUMP.EXE, we didn't take a DUMP, or any one of numerous
; JSYS errors which may of occurred.
;RETURNS + 1: SETCNT failed, CTY notified
; + 2: Success
SETCNT: MOVX T1,<GJ%OLD!GJ%DEL!GJ%SHT>
HRROI T2,[ASCIZ/SERR:ERROR.SYS/]
GTJFN%
ERJMP [CAIE 1,GJFX24
IFNSK.
TMSG <
*****************
? SETSPD: SETCNT: GTJFN% failed on SERR:ERROR.SYS because:
>
CALL JSYER0
TMSG <
*****************
>
RET
ELSE.
TMSG <
*****************
% SETSPD: Could not set SPEAR entry count from SERR:ERROR.SYS because
file was not present. Resynching from zero.
*****************
>
SETZ T3,
JRST SPRSET
ENDIF.]
HRRZS T1
MOVEM T1,TMPJFN ;SAVE JFN
MOVX T2,<OF%RD!OF%PLN>
OPENF%
JSYERR (<SETCNT: OPENF% failed on SERR:ERROR.SYS - >,<RET>)
MOVE T1,TMPJFN
FFFFP ;FIND FIRST FREE PAGE ON ERROR.SYS
SUBI T1,1 ;T1 IS NOW THE LAST USED PAGE
MOVE T2,[.FHSLF,,ESYPG]
MOVX T3,<PM%RD!PM%PLD>
PMAP% ;MAP IT IN
JSYERR (<SETCNT: PMAP% failed from SERR:ERROR.SYS - >,<RET>)
HRRZ T1,ESYSAD ;GET FIRST RESYNC ENTRY ON THIS PAGE
SKIPE T3,ESYSAD+ESYCNT(T1) ;IS THE SPRCNT ZERO?
IFSKP. ;YES, TELL WORLD AND RESYNC
TMSG <
*****************
% SETSPD: SPEAR entry count = 0 in ERROR.SYS, resynching to 0
*****************
>
ELSE. ;NO, THEN SEE IF WE CAN GET A HIGHER VALUE
HRRZ T1,ESYSAD+200 ;THIS IS THE SECOND ONE
JUMPE T1,SETCN1 ;IF ZERO, USE WHAT WE HAVE
MOVE T3,ESYSAD+ESYCNT+200(T1) ;NOT ZERO, LOOK FOR HIGHER
HRRZ T1,ESYSAD+400 ;THIS IS THE THIRD RESYNC ENTRY
JUMPE T1,SETCN1 ; ..
MOVE T3,ESYSAD+ESYCNT+400(T1) ;KEEP LOOKING
HRRZ T1,ESYSAD+600
JUMPE T1,SETCN1
MOVE T3,ESYSAD+ESYCNT+600(T1) ;THIS IS THE LAST ONE
SETCN1: ADDI T3,^D22 ;ADD IN ENOUGH ENTRIES THAT FIT IN 200 WORDS
ENDIF.
;IF ANYONE WANTS TO FIND THE LAST POSSIBLE
;VALUE, THEN BE MY GUEST.
SETO T1, ;MUST CLOSE ERROR.SYS
MOVE T2,[.FHSLF,,ESYPG]
PMAP% ;UNMAP FILE...
JSYERR (<SETCNT: PMAP% unmap of SERR:ERROR.SYS failed - >,<RET>)
MOVE T1,TMPJFN
CLOSF% ;AND CLOSE IT!
JSYERR (<SETCNT: CLOSF% failed on SERR:ERROR.SYS - >,<RET>)
SPRSET:
MOVEI T2,(T3) ;GET COUNT
MOVEI T1,.SFSPR ;GET FUNCTION CODE FOR SMON%
SMON% ;ADD OLD COUNT INTO CURRENT COPY OF MONITOR
JSYERR (<SETCNT: SMON% failed to set SPEAR error counter - >,<RET>)
RETSKP ;GOOD RETURN...
> ;REMOVAL OF SPRCNT CODE.
;DMPMAP IS THE ROUTINE TO BUILD DUMP FILE MAP, DETERMINE MMAP PAGE
; AND READ IN MMAP PAGE
DMPMAP:
HRRZ T1,QUEJFN ;GET THE DUMP FILE JFN
SETZ T2, ;POINT TO THE FIRST BYTE IN THE FILE
SFPTR ;SET FILE POINTER
ERJMP DMPMER ;HANDLE ERRORS
HRRZ T1,QUEJFN ;GET THE JFN
BIN ;GET A BYTE FROM THE FILE
ERJMP DMPMER ;HANDLE ERRORS
HLRZS T2 ;GET THE ENTRY CODE
CAIE T2,1776 ;IS THIS AN EXE FILE?
JRST DMPMBD ;NO SO THIS IS BAD
DMPMLP: ;THIS IS THE MAPPING LOOP
HRRZ T1,QUEJFN ;GET THE JFN
BIN ;GET THE NEXT WORD
ERJMP DMPMER ;HANDLE ERROR
MOVE P1,T2 ;SAVE THE FIRST WORD
HLRZS T2 ;ZERO THE LEFT HALF
CAIE T2,1775 ;ENTRY VECTOR?
CAIN T1,1777 ;END OF DIRECTORY?
JRST DMPMDN ;YES SO MAPPING PROCESS IS DONE
BIN ;NOT END SO GET SECOND WORD OF GROUP
ERJMP DMPMER ;HANDLE ERRORS
MOVE P2,T2 ;SAVE THE SECOND WORD
LDB T1,[POINT 27,P1,35] ;GET THE FILE PAGE NUMBER
LDB T2,[POINT 27,P2,35] ;GET THE CORE PAGE NUMBER
LDB T3,[POINT 9,P2,8] ;GET THE REPEAT COUNT
DMPML2: ;INNER PAGE MAP LOOP
MOVEM T1,MAPADR(T2) ;SAVE THE PAGE NUMBER IN MAP
MOVEM T2,PAGMAX ;SAVE THE MAX PAGE NUMBER
AOJ T1, ;BUMP FILE PAGE
AOJ T2, ;BUMP CORE PAGE
SOJGE T3,DMPML2 ;LOOP FOR THE REPEAT COUNT
JRST DMPMLP ;DONE WITH THIS GROUP SO GET NEXT
DMPMDN: ;HERE WHEN MAPPING IS DONE
HRRZ T1,QUEJFN ;GET THE JFN
MOVEI T2,MSECWD ;POINTER TO MSECTB
CALL READIN ;GET FROM DUMP
MOVEM T2,MSCADR ;SAVE ADDRESS OF MSECTB
MOVEI T2,SPTWD ;POINTER TO SPT
CALL READIN ;GET FROM DUMP
MOVEM T2,SPTADR ;SAVE ADDRESS OF SPT
SETOM T2 ;ALL ONES
MOVEM T2,SECTN ;CURRENTLY MAPPED SECTION (I.E. NONE YET)
AOS (P) ;BUMP THE RETURN ADDRESS
DMPMER: ;HERE ON ERROR DURING MAPPING
DMPMBD: ;HERE ON BAD EXE FILEE DIRECTORY
RET ;RETURN TO CALLER
; MAPSEC IS THE ROUTINE TO MAP A SECTION MAP FROM THE DUMP FILE
MAPSEC: ;T2/ SECTION NUMBER TO MAP
STKVAR <SEC>
MOVEM T2,SEC
SETO T1, ;UNMAP FUNCTION
MOVX T2,<.FHSLF,,MMPPG> ;SECTION MAP PAGE
MOVX T3,<PM%CNT!<1>B35> ;UNMAP ONE PAGE
PMAP
ERJMP .+1 ;IGNORE ERRROS
MOVE T2,SEC
ADD T2,MSCADR ;SECTION POINTER FOR DESIRED SECTION
CALL READIN ;GET FROM DUMP
LOAD T4,PTRCOD,T2 ;GET POINTER TYPE
CAIE T4,2 ;IS IT A SHARE POINTER?
JRST DMPMBD ;NO, BAD DUMP
LOAD T4,SPTX,T2 ;YES, GET SPT OFFSET
MOVE T2,SPTADR ;ADDRESS OF SPT
ADD T2,T4 ;LOCATION OF STORAGE ADDRESS
CALL READIN ;GET FROM DUMP
LOAD T2,STGADR,T2 ;HERE IS PAGE OF MMAP
SKIPN T1,MAPADR(T2) ;GET THE FILE PAGE OF MMAP PAGE
JRST DMPMBD ;BAD EXE FILE IF NO PAGE
HRL T1,QUEJFN ;GET THE JFN
MOVX T2,<.FHSLF,,MMPPG> ;PUT THE PAGE AT THE MMAP PAGE
MOVX T3,<PM%RD> ;WE ONLY WANT TO READ THIS PAGE
PMAP ;MAP IN THE PAGE
ERJMP DMPMER ;HANDLE ERROR
MOVE T2,SEC ;GET SECTION
MOVEM T2,SECTN ;SET CURRENTLY MAPPED SECTION
RETSKP
; READIT IS THE ROUTINE TO READ THE CONTENTS OF A PARTICULAR WORD
; OUT OF THE DUMP FILE.
READIN: ;T2/ ADDRESS OF WORD
HRRZ T1,QUEJFN ;DUMP FILE JFN
MOVE T4,T2 ;GET COPY
ANDI T4,777 ;GET OFFSET
LSH T2,-9 ;GET PAGE NUMBER
MOVE T3,MAPADR(T2) ;FIND CORRESPONDING PAGE IN DUMP
LSH T3,PGSFT ;FORM ADDRESS
ADD T3,T4 ;ADD IN OFFSET
RIN ;READ WORD
ERJMP DMPMER ;ERROR
SKIPG T2 ;ANYTHING RETURNED?
JRST DMPMBD ;NO, THEN BAD DUMP
RET ;RETURN WORD IN T2
;DMPRED IS THE ROUTINE TO MAP PAGES FROM CRASHED MONITOR VIRTUAL
; ADDRESS SPACE
DMPRED: ;ROUTINE TO MAP DUMP PAGES
;T1/ PAGE NUMBER OF MONITOR
STKVAR <MPAGE>
MOVEM T1,MPAGE ;SAVE THE MONITOR PAGE NUMBER
SETO T1, ;UNMAP FUNCTION
MOVX T2,<.FHSLF,,TMPPG> ;TEMP PAGE ONE
MOVX T3,<PM%CNT!<2>B35> ;UNMAP TWO PAGES
PMAP ;UNMAP IO PAGES
ERJMP .+1 ;IGNORE ERRROS
LDB T2,[<POINT 9,MPAGE,26>] ;GET SECTION NUMBER
CAMN T2,SECTN ;SECTION MAPPED?
IFSKP.
CALL MAPSEC ;NO, MAP SECTION FIRST
JRST DMPRDB ;BAD EXE FILE RETURN
ENDIF.
MOVE T1,MPAGE
ANDI T1,777 ;GET PAGHE IN SECTION
MOVEI T2,TMPPG ;GET THE PAGE TO TARGET PAGE
CALL DMPRD2 ;CALL THE WORKER ROUTINE
JRST DMPRDB ;BAD EXE FILE RETURN
MOVE T1,MPAGE ;GET THE MONITOR PAGE AGAIN
ADDI T1,1 ;WE WANT THE NEXT PAGE
MOVEI T2,TMPPG+1 ;MAP THE PAGE TO THE NEXT TARGET PAGE
CALL DMPRD2 ;CALL THE WORKER ROUTINE
JFCL ;ERROR IS OK
AOS (P) ;BUMP THE RETURN PC
DMPRDB: ;BAD EXE FILE RETURN
RET ;RETURN TO CALLER
DMPRD2: ;WORKER ROUTINE FOR DMPRED
LDB T3,[POINT 3,MMPADR(T1),2] ;GET THE POINTER TYPE FOR PAGE
CAIE T3,1 ;IMMEDIATE?
RET ;NO SO LOSE
HRRZ T1,MMPADR(T1) ;GET THE PHYSICAL PAGE NUMBER
CAMLE T1,PAGMAX ;IS IT A LEGAL PAGE?
RET ;NO SO ERROR RETURN
SKIPN T1,MAPADR(T1) ;GET THE FILE PAGE NUMBER
RET ;IF ZERO THEN ERROR RETURN
HRL T1,QUEJFN ;GET THE DUMP FILE JFN
HRLI T2,.FHSLF ;THIS FORK
PMAP ;MAP THE PAGE
ERJMP [RET] ;HANDLE ERROR
AOS (P) ;BUMP THE RETURN PC
RET ;RETURN TO CALLER WITH SUCCESS
;CPYDMP - ROUTINE TO COPY <SYSTEM>DUMP.EXE TO <SYSTEM>DUMP.CPY
;
;ACCEPTS IN T1/ JFN OF ORIGINAL DUMP FILE
; T2/ # OF FILE PAGES TO COPY
; CALL CPYDMP
;RETURNS: +1 ALWAYS
CPYDMP: STKVAR <DMPJFN,DMPCNT,CPYJFN,CPYSIZ>
MOVEM T1,DMPJFN ;SAVE JFN OF ORIGINAL DUMP FILE
MOVEM T2,DMPCNT ;SAVE # OF FILE PAGES TO COPY
IMULI T2,1000 ;COMPUTE # OF WORDS TO BE COPIED
SUBI T2,1 ;COMPUTE # OF LAST WORD IN COPY FILE
MOVEM T2,CPYSIZ ;SAVE # OF WORDS IN FILE
CALL STRMOU ;Mount the disk DMP: implies
MOVX T1,GJ%FOU!GJ%SHT ;GET A JFN TO MAKE THE COPY
HRROI T2,[ASCIZ /DMP:DUMP.CPY;P770000/]
GTJFN
IFNSK.
MOVX T1,GJ%FOU!GJ%SHT
HRROI T2,[ASCIZ /PS:<SYSTEM>DUMP.CPY;P770000/]
GTJFN ;TRY ALTERNATE DESTINATION
IFNSK.
DMPERR: TMSG <
*****************
? SETSPD: Failed to copy dump file because: >
MOVEI T1,.PRIOU ;THE DESTINATION
HRLOI T2,.FHSLF ;US
ERSTR ;OUTPUT THE ERROR
JFCL
JFCL
TMSG <
*****************
>
CALL UMPPGS ;UNMAP DUMP PAGES
SKIPE CPYJFN ;CHECK FOR DUMP.CPY JFN (TCO 6.1241)
IFNSK. ;THERE IS A JFN
MOVX T1,CZ%ABT ;GET THE ABORT BIT FOR CLOSF
HRR T1,CPYJFN ;GET THE JFN FOR CLOSF
CLOSF ;CLOSE THE DUMP.CPY FILE
ERJMP .+1 ;ERROR PROBABLY MEANS NOT OPEN
ENDIF.
CALL STRDIS ;Dismount a structure if need be
RET ;RETURN
ENDIF.
ENDIF.
MOVEM T1,CPYJFN ;SAVE JFN OF DUMP.CPY
MOVE T2,[440000,,OF%RD+OF%WR]
OPENF ;OPEN THE COPY FILE
JRST DMPERR ;FAILED
HRLI T1,.FBBYV ;CHANGE PROPER WORD
MOVX T2,FB%RET ;SET THE RETENTION COUNT
SETZ T3, ; TO INFINITY
CHFDB ;DO IT
ERJMP .+1 ;IGNORE ANY ERRORS
HRROI T1,[ASCIZ /
COPYING PREVIOUS SYSTEM DUMP TO:
/]
PSOUT
MOVEI T1,.PRIOU
MOVE T2,CPYJFN ;GET JFN OF DUMP.CPY FILE
SETZ T3, ;USE DEFAULT
JFNS ;OUTPUT THE THE FILE NAME
; ..
; ..
; SET UP TO COPY THE FILE
SETZM T4 ;START WITH FILE PAGE 0
CPYD10: MOVE T1,DMPCNT ;GET # OF PAGES TO COPY
JUMPLE T1,CPYD20 ;IF DONE, GO UNMAP THE PAGES
SUBI T1,CPYPGS ;COMPUTE # OF PAGES LEFT TO COPY
MOVEM T1,DMPCNT ;SAVE NEW # OF PAGES TO COPY
HRL T1,DMPJFN ;GET JFN OF ORIGINAL DUMP FILE
HRR T1,T4 ;GET FILE PAGE NUMBER
MOVE T2,[.FHSLF,,DMPPG] ;THIS FORK, FIRST PAGE TO MAP DUMP FILE
MOVEI T3,CPYPGS ;GET # OF PAGES TO MAP
SKIPGE DMPCNT ;NEED TO MAP LESS THAN THIS MANY ?
ADD T3,DMPCNT ;YES, COMPUTE # REMAINING TO BE MAPPED
TXO T3,PM%RD+PM%WR+PM%PLD+PM%CNT
PMAP ;MAP THE PAGES FROM THE ORIGINAL FILE
ERJMP DMPERR ;JUST IN CASE
HRL T1,CPYJFN ;GET JFN OF COPY FILE
HRR T1,T4 ;GET FILE PAGE NUMBER
MOVE T2,[.FHSLF,,CPYPG] ;THIS FORK, FIRST PAGE OF COPY FILE DATA
TXZ T3,PM%PLD ;NO PRE-LOADING
PMAP ;MAP THE COPY FILE
ERJMP DMPERR ;JUST IN CASE
MOVE T1,[DMPADR,,CPYADR] ;SET UP TO COPY DATA
BLT T1,CPYADR+CPYWDS-1 ;COPY DATA
ERJMP DMPERR ;IN CASE DISK IS FULL.
ADDI T4,CPYPGS ;COMPUTE ADDRESS OF NEXT FILE PAGE
JRST CPYD10 ;LOOP OVER ALL PAGES TO COPY
; HERE WHEN COPY IS COMPLETE
CPYD20: CALL UMPPGS ;UNMAP DUMP PAGES
HRRZ T1,CPYJFN ;GET JFN OF NEW FILE
HRLI T1,.FBSIZ ;GET OFFSET TO EOF POINTER
SETOM T2 ;CHANGE ALL BITS IN THE WORD
MOVE T3,CPYSIZ ;GET # OF LAST WORD IN FILE
CHFDB ;SET THE EOF POINTER
HRRZ T1,CPYJFN ;GET JFN OF COPY FILE
CLOSF ;CLOSE NEW FILE
JRST DMPERR ;FAILED, REPORT ERROR
CALL STRDIS ;Get rid of the structure if need be
RET ;RETURN
;Copy dump continued...
;Routine to mount the structure (all of it) that is implied by the expansion
;of DMP:.
STRMOU:
MOVE T1,RTYTIM ;get the amount of time for retrying
MOVEM T1,TIMVAL ;this is for CI disks
STRRTY: ;here is our retry entry point
MOVX T1,.LNSSY ;Lookup a system-wide logical name
HRROI T2,[ASCIZ |DMP|] ;Logical name without colon
SETZ T3, ;We don't want the translation
LNMST ;See if a logical name DMP:
RET ;Return now if no DMP:
MOVX T1,<GJ%SHT!GJ%OFG> ;This is the short form and parse only
HRROI T2,[ASCIZ |DMP:|] ;Logical name for dump structure
GTJFN ;Get a parse only JFN on DMP:
RET ;If it fails, leave now
HRRZM T1,T2 ;Set up the JDN in the right place
HRROI T1,DMPSTR ;Loc for the name of the structure
MOVX T3,FLD(.JSAOF,JS%DEV) ;Only output device field
SETZ T4, ;No file attribute
JFNS ;Get the device implied by DMP:
ERJMP [RET] ;Fail and try default
HRROI T1,DMPSTR ;Point to that structure name
STDEV ;String to device designator
IFSKP.
RET ;No error, means no mounting needed.
ENDIF.
;Here when we have real work to do. Loop over all disks looking for all units
;in the dump structure.
;
SETOM MSTRAD+.MSRCH ;Start with the first unit
SETOM MSTRAD+.MSRCT ; and the first controller
SETOM MSTRAD+.MSRUN ; and the first unit
DSKLOP: MOVE T1,[XWD .MSRLN,.MSRNU] ;Length of args,,function code
MOVEI T2,MSTRAD ;Address of the MSTR block
HRROI T3,CURSTR ;Byte pointer to the name of current structure
MOVEM T3,MSTRAD+.MSRSN ;Store in the arg block
HRROI T3,ALISTR ;Byte pointer to current structure alias
MOVEM T3,MSTRAD+.MSRSA ;Store it in the arg block
MSTR ;Get disk info
ERJMP MSTRER ;Handle an MSTR failure
HRROI T1,CURSTR ;Get the name of the current structure
HRROI T2,DMPSTR ;Is this the one we seek (Sorry)
STCMP ;Compare the strings
SKIPN T1 ;Are the strings the same???
JRST FNDSTR ;We have found the structure, go mount it
JRST DSKLOP ;Loop for more disks
; Here when we have found the disk name we are looking for and are ready to
;mount the critter. But first we must loop to find the other units and build
;the mount block.
;
FNDSTR: HRRZ T1,MSTRAD+.MSRNS ;Get the number of units in this structure
MOVEM T1,NUMUNT ;Store
MOVEM T1,UNTLFT ;Also store as the number of units left to find
UNTLOP: SOS UNTLFT ;Show that we have touched this unit
HLRZ T1,MSTRAD+.MSRNS ;Get the unit number within the structure
IMULI T1,.MSTNO ;Multiply by the block size to get the offset
ADDI T1,<MNTBLK+.MSTUI> ;Now make it the base addr of the unit block
MOVE T2,MSTRAD+.MSRCH ;Get the channel number
MOVEM T2,.MSTCH(T1) ;Store the channel number in the unit block
MOVE T2,MSTRAD+.MSRCT ;Get the controller number
MOVEM T2,.MSTCT(T1) ;Store in unit block
MOVE T2,MSTRAD+.MSRUN ;Get the unit number
MOVEM T2,.MSTUN(T1) ;Store in the unit block
SKIPG UNTLFT ;Are there any more units left to be done???
JRST MNTDSK ;No, mount the disk
NXTUNT: MOVE T1,[XWD .MSRLN,.MSRNU] ;Arg block len,,function code
MOVEI T2,MSTRAD ;Point to the arg block
HRROI T3,CURSTR ; Re-initialize the string
MOVEM T3,MSTRAD+.MSRSN ; pointers for the structure name
HRROI T3,ALISTR ; and alias
MOVEM T3,MSTRAD+.MSRSA ; before comparing each unit
MSTR ;Get the status of the next unit
ERJMP MSTRER ;handle an MSTR failure
HRROI T1,DMPSTR ;Get the name of the dump structure
HRROI T2,CURSTR ;Do they match???
STCMP ;Compare the strings
SKIPE T1 ;Do they match???
JRST NXTUNT ;No, dont count this one in unit list
JRST UNTLOP ;Loop to get all the units
; Here to mount the disk (at last)...
;
MNTDSK: MOVEI T1,.MSTNO ;Get the length of the unit blocks
IMUL T1,NUMUNT ;Multiply by the number of units
ADDI T1,.MSTFL+1 ;Add the overhead words
HRLZS T1 ;Move the length to the left half
HRRI T1,.MSMNT ;Add the function code
MOVEI T2,MNTBLK ;Point to the nase of the mount block
HRROI T3,DMPSTR ;Byte pointer to structure name
MOVEM T3,MNTBLK+.MSTNM ;Store in the arg block
MOVEM T3,MNTBLK+.MSTAL ;Store as the alias as well
; MOVX T3,<MS%XCL> ;Flag for making disk my very own, for me alone
MOVE T3,NUMUNT ;Get the number of units in the structure
MOVEM T3,MNTBLK+.MSTFL ;Store in the mount block
MSTR ;Mount the structure
ERJMP MSTRER ;Handle MSTR errors
SETOM STRFLG ;Set flag that we have a structure to dismount
HRROI T1,DMPSTR ;Point to the structure name
MOVEM T1,MSTRAD ;Store pointer in arg block
MOVE T1,[XWD .MSDEV+1,.MSIMC] ;Setup MSTR AC, Arg len,arg block addr
MSTR ;Increment structure mount count
ERJMP MSTRER ;Handle MSTR errors
RET ;And return
; Here on MSTR errors. We expect to see no more units but
;others are fatal to copying the dump if this is the structure we are trying
;to copy to...
;
MSTRER: MOVX T1,.FHSLF ;We want our own last error
GETER ;Get the error
HRRZS T2 ;Get just the error number part
CAIN T2,MSTX18 ;Is it end of useful drives???
IFNSK.
MOVE T1,TIMVAL ;get our timer value
CAME T1,RTYTIM ;is this our first retry?
IFSKP. ;if so, warn of retry delays..
TMSG <
*****************
%SETSPD: Waiting to see if dump structure comes online...
*****************
>
ENDIF.
MOVE T1,TIMVAL ;Get our timer value again
SUBI T1,^D1000 ;subtract 1 second
MOVEM T1,TIMVAL
SKIPG TIMVAL ;still got more time to retry?
IFSKP.
MOVEI T1,^D1000 ;Yes, sleep for 1 second
DISMS
JRST STRRTY ;Go back and retry
ENDIF.
;No more retry time, tell world.
TMSG <
*****************
?SETSPD: Could not find dump structure, trying default
*****************
>
RET ;And punt on mount attempt
ENDIF.
FATERR: TMSG <
*****************
?SETSPD: Unexpected MSTR JSYS failure, >
PSOUT ;Output the first part of the text
MOVX T1,.PRIOU ;List primary output device for error string
HRLOI T2,.FHSLF ;My last error please
SETZ T3, ;No limit on the string please
ERSTR ;Output the error string
JFCL
JFCL
TMSG <
*****************
>
RET ;All done, return now
;STRDIS
;Dismount a structure we copied a dump to.
;
STRDIS: SKIPN STRFLG ;Is there a structure to dismount???
RET ;No, return no, nothing to do here
HRROI T1,[ASCIZ \
\]
PSOUT ;Add a <CRLF> such that CTY is readable
MOVE T1,[XWD <.MSDNM+1>,.MSDIS] ;Length,,function code for MSTR
MOVEI T2,MSTRAD ;Pointer to arg block
HRROI T3,DMPSTR ;Point to structure to be dismounted
MOVEM T3,MSTRAD ;Store in the arg block
MSTR ;Dismount the structure
ERJMP MSTRER ;Handle MSTR errors
SETZM STRFLG ;Say we dismounted the structure
RET ;And return
;COPY DUMP CONTINUED....
;ROUTINE TO UNMAP DUMP PAGES ON NORMAL COMPLETION OR ERROR
UMPPGS: SETOM T1 ;UNMAP THE PAGES
MOVE T2,[.FHSLF,,DMPPG] ;PAGES MAPPED TO ORIGINAL FILE
MOVE T3,[PM%CNT+CPYPGS] ;NUMBER OF PAGES TO UNMAP
PMAP ;UNMAP THE PAGES
MOVE T2,[.FHSLF,,CPYPG] ;PAGES MAPPED TO COPY FILE
PMAP ;UNMAP THE PAGES
RET ;AND DONE
;ROUTINES TO BUFFER A STRING. GIVE IT POINTER TO STRING IN A.
;ROUTINE RETURNS POINTER TO BUFFERED STRING IN A.
;THE STRING ALWAYS BEGINS ON A WORD BOUNDARY. (SOME CALLERS ASSUME SO!)
BUFFS: MOVEI B,DICT ;SAY WHERE POOL STARTS
CALL READNM ;COPY STRING INTO FREE SPACE
COMERR <String space exhausted>
RET
;BUFFF buffers the atom buffer
;
;Returns +1: A/ pointer to buffered atom
BUFFF: HRROI A,ATMBUF ;POINT TO THE ATOM
CALLRET BUFFS ;BUFFER IT AND RETURN
;ROUTINE TAKING A STRING POINTER IN A. IT COPIES THE STRING TO FREE SPACE
;AND TAKES A SKIP RETURN, YIELDING THE POINTER TO THE STRING IN
;A. IF NO ROOM FOR THE STRING, A NON-SKIP RETURN IS TAKEN AND CONTENTS
;OF A IS INDETERMINATE
;GIVE IT FREE POOL HEADER ADDRESS IN B
READNM: STKVAR <FPA,RPTR,NEWPTR>
MOVEM A,RPTR ;REMEMBER POINTER
MOVEM B,FPA ;REMEMBER FREE POOL ADDRESS
CALL BCOUNT ;HOW MANY WORDS IN THIS STRING?
MOVE B,FPA ;SAY WHICH FREE POOL TO USE
CALL GETMEM ;GET THAT MANY
JRST NOREAD ;COULDN'T, SO TAKE NON-SKIP RETURN
HRLI B,440700 ;MAKE BYTE POINTER TO SPACE OBTAINED
MOVEM B,NEWPTR ;REMEMBER NEW POINTER
MOVE A,B
MOVE B,RPTR ;GET POINTER TO STRING
MOVEI C,0 ;STORE NULL AT END OF STRING
SOUT ;COPY THE STRING
MOVE A,NEWPTR ;GET ADDRESS WHERE STRING GOT PUT
RETSKP ;SUCCESFUL RETURN
NOREAD: RET ;NO ROOM FOR STRING
;ROUTINE TO GET MEMORY BLOCK. RETURNS +1 ALWAYS WITH ADDRESS OF BLOCK
;IN A. GIVE IT NUMBER OF WORDS DESIRED IN A.
GETBUF: MOVEI B,DICT ;USE CORRECT POOL
CALL GETMEM ;GET THE MEMORY
ERROR <SETSPD: free space exhausted>
MOVE A,B ;RETURN ADDRESS IN A
RET
; /GETMEM/ - ROUTINE TO ASSIGN MEMORY AS REQUESTED
; INPUTS: A - CONTAINS NUMBER OF WORDS WANTED
; B - FREE SPACE HEADER ADDRESS
; OUTPUTS: A - NUMBER OF WORDS OBTAINED
; B - CONTAINS ADDRESS OF WORDS GOTTEN
; RETURNS: SKIPS IF SUCCESSFUL, NON-SKIP IF NO ROOM
GETMEM: STKVAR <<SAVSTF,2>,DADR>
MOVEM B,DADR ;REMEMBER HEADER ADDRESS
GETM2: MOVE C,B ;REMEMBER WHO POINTS TO CURRENT
HRRZ B,0(C) ;B IS NOW CURRENT BLOCK
JUMPE B,R ;IF 0, WE HAVE REACHED END OF THE ROAD
HLRZ D,0(B) ;GET SIZE OF CURRENT BLOCK
CAMGE D,A ;IS IT SUFFICIENT FOR REQUEST?
JRST GETM2 ;NO, SO TRY NEXT BLOCK
GETM3: HRL B,0(B) ;GET LINK OF CURRENT BLOCK
HLRM B,0(C) ;MAKE PREV LINK BE WHAT WAS OUR LINK
HRRZS B ;ISOLATE CURRENT BLOCKS ADDRESS
CAMN D,A ;IS THIS AN EXACT MATCH ON SIZE?
RETSKP ;SUCCESS, SKIP RETURN
DMOVEM A,SAVSTF ;SAVE NUMBER OF WORDS AND ADDRESS
ADD B,A ;GET FIRST WORD TO RETURN
SUBM D,A ;NUMBER OF WORDS TO RETURN
MOVE C,DADR ;GET ADDRESS OF CONTROL WORD
CALL RETMEM ;RETURN THE EXTRA WORDS
DMOVE A,SAVSTF ;RESTORE NUMBER OF WORDS AND ADDRESS
RETSKP ;SUCCESS, SKIP RETURN
;STREM ROUTINE TAKES POINTER TO STRING IN A, AND "REMOVES" THE STRING
;FROM THE STRING STORAGE SPACE. THE SPACE WHERE THE STRING WAS IS
;RETURNED TO FREE SPACE
STREM: SAVEAC <A,B,C,D> ; NEED TO BE TRANSPARENT
STKVAR <SPT000>
MOVEM A,SPT000 ;REMEMBER POINTER
CALL BCOUNT ;COUNT NUMBER OF WORDS IN THE STRING
HRRZ B,SPT000 ;GET RID OF BYTE POINTER P AND S
CALLRET RETBUF ;RETURN THE BUFFER
;RETBUF RETURNS A BUFFER TO FREE STORAGE
; A/ SIZE BEING RETURNED
; B/ ADDRESS OF BLOCK BEING RETURNED
RETBUF: MOVEI C,DICT ;SAY WHERE FREE SPACE IS
CALLRET RETMEM ;RETURN THE SPACE TO THE FREE POOL
; /RETMEM/ - ROUTINE TO DE-ALLOCATE MEMORY WHEN WE ARE THROUGH WITH IT
; INPUT: A - CONTAINS SIZE OF BLOCK TO RETURN
; B - CONTAINS ADDRESS OF BLOCK BEING RETURNED
; C - FREE SPACE HEADER ADDRESS
; OUTPUT: NONE
; RETURNS: ALWAYS CPOPJ
;
RETMEM: HRRZ D,0(C) ;GET PREV'S LINK
SKIPE D ;IF CURRENT IS 0 OR
CAIL D,0(B) ; ITS ADDRESS IS PAST ADDR OF RETURN BLK
JRST RETM4 ; THEN RETURN BLOCK HERE
MOVE C,D ;MAKE PREV=CURRENT
JRST RETMEM ;CONTINUE
RETM4: HRRM D,0(B) ;FORWARD PTR OF RETURNED BLOCK
HRRM B,0(C) ;FORWARD PTR OF PREV BLOCK
HRLM A,0(B) ;STORE SIZE OF THIS BLOCK
ADD A,B ;ADD ADDR+SIZE
CAIE A,0(D) ;ARE WE RIGHT UP AGAINST NEXT BLOCK?
JRST RETM5 ;NO, CANT COMBINE
HRRZ A,0(D) ;GET NEXT GUYS FORWARD LINK
HRRM A,0(B) ;MAKE IT OURS. IE POINT PAST HIM
HLRZ A,0(B) ;GET OUR SIZE
HLRZ D,0(D) ;GET HIS SIZE
ADD A,D ;GET OUR NEW COMBINED SIZE
HRLM A,0(B) ;STORE INTO RETURNED BLOCK
HRRZ D,0(B) ;GET LINK OF CURRENT BLOCK
RETM5: HLRZ A,0(C) ;GET PREV BLOCKS SIZE
ADDI A,0(C) ;ADD HIS ADDRESS AND SIZE
CAIE A,0(B) ;DOES HE BUTT RIGHT UP AGAINST US?
RET ;NO, RETURN WITH NO COMBINATION
HRRM D,0(C) ;MAKE PREV POINT TO OUR NEXT
HLRZ A,0(C) ;GET HIS SIZE
HLRZ B,0(B) ;AND OUR SIZE
ADD A,B ;COMBINE THE SIZES
HRLM A,0(C) ;STORE COMBINED SIZE
RET ;RETURN
;ROUTINE TO INITIALIZE FREE SPACE STORAGE.
FREINI: SETZM DICT ;INITIALIZE FREE SPACE SYSTEM
MOVEI A,FRESIZ ;FREE UP THIS MUCH FREE SPACE (ALL OF IT!)
MOVEI B,FREE ;STARTS AT ADDRESS IN B
CALL RETBUF ;FREE IT UP IN STANDARD WAY
MOVEI A,STRSIZ ;ALLOCATE SOME SPACE FOR STRINGS
CALL GETBUF
HRLI A,440700 ;MAKE POINTER TO STRING STORAGE
MOVEM A,CSBUFP ;REMEMBER POINTER TO STRING STORAGE
RET
;FIXPT changes byte pointer with -1 in left half to have 440700 in left half.
;
;Accepts: A/ pointer
;
;Returns+1: A/ converted pointer
FIXPT: TLC A,-1 ;CHANGE -1 TO 0
TLCN A,-1 ;RESTORE BITS AND SKIP IF ANY ARE NOW ON
HRLI A,440700 ;THEY WERE ALL OFF SO MUST HAVE BEEN ALL ON
RET
;BCOUNT MEASURES AN ASCIZ STRING.
;
;ACCEPTS: A/ POINTER (-1,,FOO O.K.!)
;
;RETURNS+1: A/ NUMBER OF WORDS NEEDED IN A
; B/ NUMBER OF CHARACTERS
BCOUNT: CALL FIXPT ;CHANGE -1 TO 440700
MOVEI B,0 ;B WILL ACCUMULATE COUNT OF BYTES
BC1: ILDB C,A ;READ NEXT BYTE
CAIE C,0 ;DONE COUNTING IF NULL SEEN
AOJA B,BC1 ;NOT DONE, KEEP COUNTING
MOVE D,B ;REMEMBER EXACT COUNT IN D
AOJ B, ;LEAVE ROOM FOR NULL
IDIVI B,5 ;GET NUMBER OF WORDS
CAIE C,0 ;EXTRA CHARACTERS?
AOJ B, ;YES, THEY TAKE A WHOLE WORD
MOVE A,B
MOVE B,D ;RETURN BYTE COUNT IN B
RET
SYSERR: BLOCK ^D512
; CACHE REFILL ALGORITHM RAM LOADING INSTRUCTIONS
; *** CURRENTLY PERFORMS NO FUNCTION ***
REPEAT 0,< ;DISABLE THIS CODE
REFILL:
USRIO ;TURN ON USER IOT
RET ;FAILED
BLKO APR,0
BLKO APR,100004
BLKO APR,200010
BLKO APR,300014
BLKO APR,400020
BLKO APR,500024
BLKO APR,600030
BLKO APR,700034
BLKO APR,300040
BLKO APR,100044
BLKO APR,200050
BLKO APR,300054
BLKO APR,200060
BLKO APR,100064
BLKO APR,200070
BLKO APR,300074
BLKO APR,700100
BLKO APR,100104
BLKO APR,200110
BLKO APR,700114
BLKO APR,100120
BLKO APR,100124
BLKO APR,200130
BLKO APR,700134
BLKO APR,600140
BLKO APR,500144
BLKO APR,600150
BLKO APR,700154
BLKO APR,500160
BLKO APR,500164
BLKO APR,600170
BLKO APR,700174
BLKO APR,000200
BLKO APR,300204
BLKO APR,200210
BLKO APR,300214
BLKO APR,000220
BLKO APR,200224
BLKO APR,200230
BLKO APR,300234
BLKO APR,000240
BLKO APR,100244
BLKO APR,200250
BLKO APR,300254
BLKO APR,400260
BLKO APR,500264
BLKO APR,600270
BLKO APR,700274
BLKO APR,000300
BLKO APR,700304
BLKO APR,700310
BLKO APR,700314
BLKO APR,000320
BLKO APR,000324
BLKO APR,000330
BLKO APR,700334
BLKO APR,400340
BLKO APR,600344
BLKO APR,600350
BLKO APR,600354
BLKO APR,400360
BLKO APR,400364
BLKO APR,600370
BLKO APR,400374
BLKO APR,300400
BLKO APR,100404
BLKO APR,300410
BLKO APR,300414
BLKO APR,100420
BLKO APR,100424
BLKO APR,100430
BLKO APR,300434
BLKO APR,000440
BLKO APR,700444
BLKO APR,700450
BLKO APR,700454
BLKO APR,000460
BLKO APR,000464
BLKO APR,000470
BLKO APR,700474
BLKO APR,000500
BLKO APR,100504
BLKO APR,200510
BLKO APR,300514
BLKO APR,400520
BLKO APR,500524
BLKO APR,600530
BLKO APR,700534
BLKO APR,400540
BLKO APR,500544
BLKO APR,500550
BLKO APR,700554
BLKO APR,400560
BLKO APR,500564
BLKO APR,400570
BLKO APR,700574
BLKO APR,000600
BLKO APR,100604
BLKO APR,200610
BLKO APR,200614
BLKO APR,000620
BLKO APR,100624
BLKO APR,200630
BLKO APR,100634
BLKO APR,000640
BLKO APR,500644
BLKO APR,600650
BLKO APR,600654
BLKO APR,000660
BLKO APR,500664
BLKO APR,600670
BLKO APR,000674
BLKO APR,400700
BLKO APR,500704
BLKO APR,600710
BLKO APR,500714
BLKO APR,400720
BLKO APR,500724
BLKO APR,600730
BLKO APR,400734
BLKO APR,000740
BLKO APR,100744
BLKO APR,200750
BLKO APR,300754
BLKO APR,400760
BLKO APR,500764
BLKO APR,600770
BLKO APR,700774
RET ;AND DONE
> ;END OF REPEAT ZERO
END <ENVLEN,,ENTVEC>