Trailing-Edge
-
PDP-10 Archives
-
SRI_NIC_PERM_SRC_1_19910112
-
7/ap23-mon/device.mac
There are 53 other files named device.mac in the archive. Click here to see a list.
; Edit= 8880 to DEVICE.MAC on 10-Aug-88 by RASPUZZI
;Update BUG. documentation.
; UPD ID= 8501, RIP:<7.MONITOR>DEVICE.MAC.2, 9-Feb-88 14:52:00 by GSCOTT
;TCO 7.1218 - Update copyright notice.
; UPD ID= 2062, SNARK:<6.1.MONITOR>DEVICE.MAC.14, 3-Jun-85 14:28:39 by MCCOLLUM
;TCO 6.1.1406 - Update copyright notice.
; UPD ID= 1892, SNARK:<6.1.MONITOR>DEVICE.MAC.13, 4-May-85 15:30:02 by MCCOLLUM
;TCO 6.1.1238 - Fix more BUG. documentation
; UPD ID= 1870, SNARK:<6.1.MONITOR>DEVICE.MAC.12, 4-May-85 11:21:20 by MCCOLLUM
;TCO 6.1.1238 - Fix more BUG. documentation
; UPD ID= 1815, SNARK:<6.1.MONITOR>DEVICE.MAC.11, 24-Apr-85 15:22:42 by MCCOLLUM
;TCO 6.1.1238 - Fix BUG. documentation
; UPD ID= 4529, SNARK:<6.MONITOR>DEVICE.MAC.10, 14-Jul-84 09:32:26 by PURRETTA
;Update copyright statement
; UPD ID= 2859, SNARK:<6.MONITOR>DEVICE.MAC.9, 23-Aug-83 15:06:00 by LOMARTIRE
;TCO 6.1692 - Change macro name from LCKINI to INILCK so routine is usable
; UPD ID= 2438, SNARK:<6.MONITOR>DEVICE.MAC.8, 6-May-83 11:29:06 by LOMARTIRE
;TCO 6.1628 - Try to prevent NOFNDU in FNDUNT. If FILDEV=0, use DEV instead.
; DEV is setup by CHKJFN to contain FILDEV.
; UPD ID= 1391, SNARK:<6.MONITOR>DEVICE.MAC.7, 29-Oct-82 14:03:49 by COBB
;TCO 6.1337 - Check FILDEV on entry to FNDUNT. If 0, give NOFNDU BUGHLT
; UPD ID= 1025, SNARK:<6.MONITOR>DEVICE.MAC.6, 2-Aug-82 11:12:14 by PAETZOLD
;TCO 6.1203 - Rewrite NUMSIX so it does not put us into section zero
; UPD ID= 857, SNARK:<6.MONITOR>DEVICE.MAC.5, 7-Jun-82 09:38:38 by MURPHY
;TCO 6.1147 - Move bugdefs from BUGS.MAC to here and put them in-line.
; UPD ID= 214, SNARK:<6.MONITOR>DEVICE.MAC.4, 20-Nov-81 16:46:13 by MCINTEE
;correction of TCO 6.1030; make MDDOK & TSTCHR safer - HRRZ instead of MOVE
; UPD ID= 130, SNARK:<6.MONITOR>DEVICE.MAC.3, 19-Oct-81 15:04:36 by COBB
;TCO 6.1029 - CHANGE SE1CAL TO EA.ENT
;<6.MONITOR>DEVICE.MAC.2, 16-Oct-81 17:49:55, EDIT BY MURPHY
;TCO 6.1030 - Node names in filespecs; etc.
;Revise DTB format; get rid of double skips on NLUKD, etc.
; UPD ID= 175, SNARK:<5.MONITOR>DEVICE.MAC.8, 15-Sep-81 11:51:34 by MOSER
;TCO 5.1511 MOVE 5.1499 TO IO.MAC WHERE IT BELONGS IT CAUSES PROBLEMS HERE.
; UPD ID= 158, SNARK:<5.MONITOR>DEVICE.MAC.7, 9-Sep-81 15:56:38 by MOSER
;TCO 5.1499 WHEN SETTING UP FOR READ AFTER WRITING INSURE THAT FILCNT IS
; CORRECT FOR READ SO EOF WILL BE SEEN.
; UPD ID= 1223, SNARK:<5.MONITOR>DEVICE.MAC.6, 3-Nov-80 14:53:15 by DONAHUE
;MORE TCO 5.1164 - DELETE CHANGES TO THIS MODULE, FIX IS IN GTJFN
; UPD ID= 1123, SNARK:<5.MONITOR>DEVICE.MAC.5, 3-Oct-80 16:49:36 by DONAHUE
;ADD TCO NUMBER TO COMMENT AT DEVLKE
; UPD ID= 1109, SNARK:<5.MONITOR>DEVICE.MAC.4, 2-Oct-80 13:49:25 by DONAHUE
;TCO 5.1164 - DON'T CHECK PARSE ONLY BIT AT DEVLKE
; UPD ID= 960, SNARK:<5.MONITOR>DEVICE.MAC.3, 25-Aug-80 16:25:38 by ENGEL
;TCO 5.1136 - ADD DEVLKK
; UPD ID= 653, SNARK:<5.MONITOR>DEVICE.MAC.2, 16-Jun-80 17:00:04 by OSMAN
;tco 5.1050 - Make jfn on TTY: use fork's controlling terminal
;<OSMAN.MON>DEVICE.MAC.1, 10-Sep-79 15:21:02, EDIT BY OSMAN
;TCO 4.2412 - Move definition of BUGHLTs, BUGCHKs, and BUGINFs to BUGS.MAC
;<4.MONITOR>DEVICE.MAC.108, 27-Jul-79 15:00:52, EDIT BY HELLIWELL
;FIX BUG AT DEVLK7 WHICH SCREWED UP DEVICE DESIGNATOR FOR MOUNTABLE DEVICES (DECTAPE)
;<4.MONITOR>DEVICE.MAC.107, 26-Apr-79 10:51:57, Edit by KONEN
;<4.MONITOR>DEVICE.MAC.106, 22-Apr-79 21:29:01, Edit by KONEN
;CHANGE INITING JOB IN SDB TO INITING FORK
;<4.MONITOR>DEVICE.MAC.105, 4-Mar-79 15:00:49, EDIT BY KONEN
;UPDATE COPYRIGHT FOR RELEASE 4
; COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1976, 1988.
; ALL RIGHTS RESERVED.
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
; ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
; INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
; COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
; OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
; TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
; AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
; CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
; SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
SEARCH PROLOG
TTITLE DEVICE
SWAPCD
;SPECIAL AC DEFINITIONS
DEFAC (STS,P1)
DEFAC (JFN,P2)
DEFAC (DEV,P4) ;DEVICE PTR
DEFAC (F1,P5)
; Initialize device tables
;CALLED AT SYSTEM STARTUP TO INITIALIZE DEVNAM,ETC.
;ACCEPTS: NONE
;RETURNS +1: ALWAYS
; CALL DEVINI
;USE OF REGISTERS
;C/ POINTER TO DEVXXX TABLES, INCREMENTED ONCE FOR EACH UNIT
;D/ POINTER TO INIDVT, INCREMENTED ONCE PER DEVICE TYPE
DEVINI::EA.ENT
INILCK DEVLKK ;INIT THE LOCK
SETOM STRLOK ;INITIALIZE STRUCTURE DISMOUNTING LOCK
MOVSI C,-NDEV
MOVSI D,-NINIDV
INIDVL: HRRZ A,INIDVT+3(D) ;GET NUMBER OF UNITS FOR THIS DEVICE
ANDI A,DV%UNT ;MASK OFF UNIT BITS
PUSH P,A ;SAVE COUNT OF UNITS
;HERE ON NEXT UNIT FOR A MULTI-UNIT DEVICE
INIDV0: MOVE A,INIDVT+1(D) ;GET NUMBER OF DEVICES AND DISPATCH
MOVEM A,DEVDSP(C) ;SET UP DISPATCH TABLE
MOVE A,INIDVT+2(D) ;GET MODES AND CHAR1
MOVEM A,DEVCHR(C) ;SET UP DEVCHR WORD FOR THIS DEVICE
HLLZ A,INIDVT+3(D) ;GET CHAR2 BITS
MOVEM A,DEVCH1(C) ;STORE IN SECOND CHARACTERISTICS TABLE
MOVE A,INIDVT(D) ;GET DEVICE NAME
MOVEM A,DEVNAM(C) ;STORE SIXBIT NAME (WITHOUT UNIT #)
SKIPG 0(P) ;THIS A MULTIPLE UNIT DEVICE?
JRST INIDV2 ;NO, SET UNIT # TO -1
;DEVICE HAS UNITS
SOS B,0(P) ;GET UNIT # OF THIS DEVICE
HRRZ A,INIDVT+3(D) ;GET TOTAL # OF UNITS
SUBI A,1(B) ;GET UNIT # TO PUT IN TABLE
HRRZ B,C ;GET INDEX INTO DEVXXX TABLES
CAIL B,DVXST0 ;ARE WE WITHIN THE 'STR' DEFINITIONS?
CAIL B,DVXSTN
JRST INIDV6 ;NO.
MOVX B,D1%NIU ;YES. INDICATE SLOT NOT IN USE BECAUSE
IORM B,DEVCH1(C) ; NOT YET ASSIGNED TO A STRUCTURE
HRRZM A,DEVUNT(C) ;SET OWNING JOB TO 0 SO EXEC WON'T THINK
; IT IS AVAILABLE, ALSO SET UNIT NUMBER
JRST INIDV7 ;DON'T MESS AROUND WITH DEVUNT
INIDV6: HRROM A,DEVUNT(C) ;MARK THAT DEVICE IS FREE ALSO
MOVE B,DEVCH1(C) ;SEE IF THIS IS A SPOOLED DEVICE
TLNE B,(D1%SPL) ;...
SETOM DEVUNT(C) ;YES, NO UNIT NUMBER FOR SPOOLED DEV'S
INIDV7: CALL NUMSIX ;CONVERT UNIT # TO SIXBIT
MOVSI B,770000 ;NOW SET UP TO BUILD DEVICE NAME
INIDV1: LSH B,-6 ;SHIFT MASK TO NEXT SIXBIT CHAR POSITION
LSH A,-6 ;SHIFT SIXBIT UNIT NUMBER ALSO
TDNE B,INIDVT(D) ;SEE IF AT FIRST BLANK CHAR YET
JRST INIDV1 ;NO, LOOP BACK TIL BLANK CHAR FOUND
IORM A,DEVNAM(C) ;CREATE FULL DEVICE NAME PLUS UNIT #
AOBJN C,.+1 ;STEP TO NEXT DEVICE ENTRY IN TABLES
SKIPLE 0(P) ;ANY MORE UNITS FOR THIS DEVICE?
JRST INIDV0 ;YES, LOOP BACK AND SET UP TABLES
JRST INIDV3 ;NO, GO ON TO NEXT DEVICE TYPE
;DEVICE HAS NO UNITS
INIDV2: SETOM DEVUNT(C) ;MARK THAT THIS IS A NO UNIT DEVICE
AOBJN C,INIDV3 ;AND GO TO NEXT DEVICE
;HERE WHEN DONE WITH A PARTICULAR DEVICE (ALL UNITS DONE)
INIDV3: ADD D,BHC+DVTSTP ;STEP TO NEXT DEVICE IN INIDVT TABLE
POP P,0(P) ;CLEAR OUT STACK
JUMPL D,INIDVL ;LOOP BACK FOR ALL DEVICES
;ADD DEVICES ARE DONE. CLEAR UNUSED ENTRIES IF THERE ARE ANY
JUMPGE C,INIDV5 ;ANY MORE ENTRIES IN TABLE?
INIDV4: SETZM DEVNAM(C) ;YES, ZERO ALL UNUSED ENTRIES
SETZM DEVCHR(C)
SETZM DEVCH1(C)
SETZM DEVUNT(C)
SETZM DEVDSP(C)
AOBJN C,INIDV4 ;LOOP BACK TILL ALL ENTRIES CLEARED
INIDV5: MOVE A,JOBNO
MOVE B,CTRLTT
CALL TTYASN ;ASSIGN CTRLTT NOW THAT DEV TABLES EXIST
BUG.(HLT,TTNAC8,DEVICE,SOFT,<Cannot assign terminal at DEVINI>,,<
Cause: The monitor could not assign a terminal to a job because
1. It failed to get resident storage.
2. The line is not fully active; it is okay for system messages
and sendalls. Need a CNTRL/C on line.
3. Or a programming error.
>)
RET
; Device lookup
;ACCEPTS:
; A/ADDRESS OF STRING BLOCK CONTAINING DEVICE NAME IN ASCIZ,
; STARTING AT C(A)+1
;RETURNS +1: DEVICE NAME NOT FOUND IN DEVNAM
; A/ERROR CODE
; +2: DEVICE FOUND
; A/FIRST WORD OF DEVICE CHARACTERISTICS
; B/OFFSET IN DEVXXX TABLES FOR THIS DEVICE
; C/ UNIQUE CODE IF STRUCTURE
;LOOKS IN DEVNAM FOR NAME MATCHING THAT POINTED TO BY AC1
;SUCCESS INDICATES ONLY THAT DEVICE EXISTS. NOTE THAT FOR
;STRUCTURES, UNUSED SLOTS HAVE ENTRIES IN DEVNAM OF THE FORM STRN AND
;BIT D1%NIU SET IN DEVCH1
DEVLUX:: EA.ENT
HRRZ B,A ;ONLY ADDRESS FOR EXADR
MOVE B,1(B) ;GET FIRST WORD OF STRING
TLNN B,774000 ;SEE IF FIRST CHARACTER IS NULL
JRST DEVLK5 ; Null name not ok
ANDCMI B,377 ;CLEAR 5TH BYTE TO LOOK FOR EXACTLY
CAMN B,[ASCIZ /CTY/] ; 'CTY' (4TH BYTE MUST BE NULL)
JRST [ MOVE A,CTYLNO ;FOUND 'CTY'
JRST DEVLK4]
CAME B,[ASCIZ /TTY/] ;IS IT 'TTY'?
JRST DEVLK0 ;NO.
MOVE B,JOBNO ;YES
MOVE A,FORKN ;SEE WHICH FORK OF JOB WE ARE
LOAD A,FRKTTY,(A) ;GET OUR CONTROLLING TERMINAL
CAIE A,-1 ;OTHER THAN JOB CONTROLLING TERMINAL?
JRST [ TXZ A,.TTDES ;YES, MAKE TERMINAL NUMBER
JRST DEVLK4] ;USE FORK'S TERMINAL AS "TTY"
HLRZ A,JOBPT(B) ;NO FORK TERMINAL, USE JOB'S.
CAIN A,777777
JRST DEVLK5
;FOUND CTY
DEVLK4: ADD A,DEVTT0 ;ADD INDEX OF TTY0
MOVE B,A
JRST DEVLK3
;FOUND NOTHING SPECIAL
DEVLK0: CALL ASCSIX ; Convert to sixbit
JRST DEVLK5 ; Non-sixbit or too many
MOVSI B,-NDEV
;SEARCH FOR MATCHING DEVNAM
DEVLK1: CAME A,DEVNAM(B) ;IS THIS THE DEVICE?
DEVLK2: AOBJN B,DEVLK1 ;NO. KEEP LOOKING
JUMPGE B,DEVLK5 ;DID WE FIND IT?
MOVE A,DEVCH1(B) ;YES. GET 2ND CHARACTERISTICS WORD
TXNE A,D1%NIU ;IS SLOT IN USE?
JRST DEVLK2 ;NO. NO MATCH
HRRZ C,B ;GET INDEX ONLY
CAIL C,DVXST0 ;IS IT A STRUCTURE
CAIL C,DVXSTN
JRST DEVLK3 ;NO - PROCEED
PUSH P,B ;SAVE INDEX
HRRZ A,DEVUNT(B) ;GET STR # (TEMP)
ANDI A,DV%UNT
CAIN A,DV%UNT
MOVEI A,-1 ;SET TO -1
CALL STRCNV ;GET STR UNIQUE CODE (TEMP)
JRST [ POP P,B ;FAILED - NO MATCH
JRST DEVLK2]
MOVE C,A ;RETURN IN C
POP P,B ;RESTORE B
DEVLK3: MOVE A,DEVCHR(B) ;YES. RETURN CHARACTERISTICS
RETSKP
DEVLK5: MOVEI A,GJFX16 ;RETURN NO SUCH DEVICE
RET
;LOOKUP DEVICE AND CHECK ASSIGNMENT, MOUNT IF NECESSARY
;ACCEPTS:
; A/ADDRESS OF STRING BLOCK CONTAINING DEVICE NAME IN ASCIZ,
; STARTING AT C(A)+1
; CALL DEVLUX
; RETURN +1: IF NOT FOUND, OR NOT MOUNTABLE
; RETURN +2: SUCCESS,
; A/ DEVICE CHARACTERISTICS
; B/ DEV TABLE INDEX
; C/ UNIQUE CODE IF STRUCTURE
; DEV/ UNIT #,,DISPATCH TABLE
DEVLUK::EA.ENT
STKVAR <DVLKIN,DVLKUC>
SETZ DEV, ;INIT DEV IN CASE OF FAILURE
CALL DEVLUX ;LOOKUP NAME
;RETURNS: 1/CHARACTERISTICS, 2/INDEX TO DEVXXX
JRST DEVLKE ;NOT FOUND
MOVE DEV,DEVDSP(B) ;DEV/(UNIT,,DISPATCH ADDRESS)
HRRZ D,DEVUNT(B) ;SET UP UNIT NUMBER IN DEV
ANDI D,DV%UNT
CAIN D,DV%UNT ;CHECK FOR -1
SETO D,0 ;MAKE IT -1
HRL DEV,D
HRRZ D,B ;GET INDEX INTO DEVICE TABLES
CAIL D,DVXST0 ;IS IT A STRUCTURE?
CAIL D,DVXSTN
JRST DEVLK7 ;NO - GO ON
MOVEM B,DVLKIN ;SAVE INDEX
MOVEM C,DVLKUC ;SAVE UNIQUE CODE
MOVE A,C ;GET UNIQUE CODE
CALL CNVSTR ;LOCK STR AND VALIDATE CODE
JRST DEVLK9 ;RETURN NO SUCH DEVICE
MOVE B,DVLKIN ;RESTORE INDEX
MOVX D,D1%INI ;SEE IF BEING INITED
TDNN D,DEVCH1(B) ;...
JRST DEVLK6 ;NO - OK THEN
MOVE D,STRTAB(A) ;GET SDB ADDRESS
LOAD D,STRJB,(D) ;GET FORK INITING STR
CAMN D,FORKX ;THIS FORK?
JRST DEVLK6 ;YES - OK
CALL ULKSTR ;NO - ULKOCK STR
JRST DEVLK9 ;RETURN ERROR
DEVLK6: CALL ULKSTR ;UNLOCK STRUCTURE
MOVE C,DVLKUC ;RESTOR UNIQUE CODE
MOVE A,DEVCHR(B) ;RETURN DEVICE CHARACTERISTICS
RETSKP
DEVLK7: CALL DEVAV ;IS DEVICE AVAILABLE?
RETSKP ;NO SO DON'T MOUNT
TLNE A,(DV%MDV) ;DEVICE MOUNTABLE BUT NOT MOUNTED?
TLNE A,(DV%MNT)
RETSKP
TLZ A,777000 ;YES. CONSTRUCT DEV DESIG
TLO A,.DVDES
HRR A,DEVUNT(B)
TRC A,DV%UNT ;TOGGLE UNIT NUMBER
TRCN A,DV%UNT ;TOGGLE BACK, TEST FOR ALL 1'S
TRO A,-1 ;AND MAKE ENTIRE HW 1'S
MOUNT ;MOUNT IT
JRST DEVLKE ;FAILED, RETURN ERROR CODE
MOVE A,DEVCHR(B) ;A/CHARACTERISTICS
RETSKP
DEVLK9: MOVEI A,GJFX16 ;DEVICE NOT KNOWN
DEVLKE: TQNE <ASTF> ;OUTPUT STARS ON?
RETSKP ;YES, ALWAYS SUCCEED THEN
RETBAD ;NO, GIVE ERROR RETURN
;CHKDEV AND CHKDES - Check device designator
;ACCEPTS:
; A/ Device designator
; CALL CHKDEV ;THIS CHECKS IF DEVICE IS AVAILABLE
; OR
; CALL CHKDES ;JUST CHECKS IF DESIGNATOR IS LEGAL
;ReturnS +1: Error, number in a
; +2:Ok,
; A/ Unit number
; B/ Index into device tables
; C/ Device characteristics word (DEVCHR)
; DEV/ (UNIT NUMBER,,DISPATCH ADDRESS)
CHKDEV::TRVAR <STRNXX>
SETOM STRNXX ;ASSUME NO STR YET
CALL CHKDSS ;SEE IF DESIGNATOR IS VALID
RETBAD () ;ILLEGAL DESIGNATOR
EA.ENT
MOVX D,D1%INI ;SEE IF DEVICE IS BEING INITIALIZED
TDNN D,DEVCH1(B) ; (CURRENTLY FOR STRUCTURES ONLY)
JRST CHKDV2 ;NO. PROCEED AS USUAL
HRRZ D,DEVUNT(B) ;YES. GET UNIT NUMBER
ANDI D,DV%UNT
CAIN D,DV%UNT ;CHECK FOR -1
SETO D,0 ;MAKE IT -1
MOVE D,STRTAB(D) ;POINT TO START OF SDB FOR THIS STRUCTURE
LOAD D,STRJB,(D) ;GET FORK THAT IS ININIALIZING
CAMN D,FORKX ;IS IT THIS FORK?
JRST CHKDEX ;YES - SUCCESS
JRST CHKDV3 ;NO. TAKE ERROR RETURN
CHKDV2: CALL DEVAV ;DEVICE AVAILABLE?
CAIA ;NO
JRST CHKDEX ;DEVICE IS AVAILABLE
CHKDV3: SKIPL A,STRNXX ;SEE IF STR #
CALL ULKSTR ;UNLOCK IF HAVE ONE
MOVEI A,DEVX2 ;NOT AVAILABLE
RET ;GIVE ERROR RETURN
;CHKDES - CHECK FOR EXISTING DEVICE
;SEARCHES DEVXXX TABLES FOR MATCHING DEVICE TYPE AND UNIT NUMBER.
;NOTE THAT FOR STRUCTURES, UNUSED SLOTS HAVE ENTRIES IN DEVNAM OF THE
;FORM STRN AND BIT D1%NIU SET IN DEVCH1
CHKDES::TRVAR <STRNXX>
SETOM STRNXX ;MARK NONE SEEN YET
CALL CHKDSS ;CHECK DESIGNATOR AND LOCK STR
RETBAD () ;NO SUCH DEVICE
EA.ENT
CHKDEX: SKIPGE STRNXX ;IF .GE. 0 THEN UNLOCK STR
RETSKP ;GOOD RETURN
MOVE T1,STRNXX ;GET STR #
MOVE T1,STRTAB(T1) ;GET SDB PNTR
LOAD T1,STRUC,(T1) ;GET UNIQUE CODE
EXCH T1,STRNXX ;SAVE IT A GET STR # BACK
CALL ULKSTR ;UNLOCK STRUCTURE
MOVE T1,STRNXX ;RETURN UNIQUE CODE
HRL DEV,T1 ;...
RETSKP ;GOOD RETURN
;CHKDSS - INTERNAL ROUTINE TO CHECK DEVICE DESIGNATOR. ASSUMES THAT
;A TRVAR NAMED "STRNXX" EXISTS IN THE CALLING ROUTINE.
;ACCEPTS:
; A/ DEVICE DESIGNATOR
; CALL CHKDSS
;RETURNS +1: INVALID DEVICE DESIGNATOR
; A/ ERROR CODE
; +2: VALID DEVICE DESIGNATOR
; A/ UNIT NUMBER
; B/ INDEX INTO DEVICE TABLES
; C/ DEVICE CHARACTERISTICS (DEVCHR)
; DEV/ (UNIT NUMBER,,DISPATCH ADDRESS)
;VALID DESIGNATORS ARE:
; (0,,-1) -- CONTROLLING TERMINAL
; (0,,.TTDES+N) -- TERMINAL N
; (.DVDES+.DVDSK,,UNIQUE CODE) -- STRUCTURE MOUNTED WITH THIS UNIQUE CODE
; (.DVDES+.DVDSK,,-1) -- CONNECTED STRUCTURE
; (.DVDES+M,,N) -- UNIT N OF DEVICE TYPE M
; (.DVDES+M,,-1) -- DEVICE TYPE M (NON-UNIT DEVICE)
CHKDSS: STKVAR <CHKDVD,CHKDVU,CHKCSZ>
CHKDS1: TLNN A,777777 ; Left half zero means tty designator
JRST TTYDEV
TLZN A,.DVDES ; These bits always on
RETBAD (DEVX1) ;NOT ON - INVALID DESIGNATOR
TLNN A,777777 ;THIS WILL BE ZERO IF A DISK TYPE
;DEVICE TYPE IS .DVDSK. IF RH IS -1, GET CONNECTED STRUCTURE.
;IN EITHER CASE, CONVERT UNIQUE CODE TO STRUCTURE NUMBER, WHICH IS
;THE UNIT NUMBER FOR THE DEVICE TABLES. LEAVE THE STRUCTURE LOCKED
JRST [ CAIN A,-1 ;CHECK SPECIAL
CALL [CALL GTCSCD ;GET CONNECTED DIR #
HLRZS A ;UNIQUE CODE ONLY
RET]
CALL CNVSTR ;GET STR #
RETBAD (DEVX1)
MOVEM A,STRNXX ;SAVE STR # FOR RELEASE
JRST .+1]
;SEARCH THE DEVICE TABLES FOR THE UNIT SPECIFIED BY THE DEVICE DESIGNATOR
;(IF NON-UNIT DEVICE, DEVUNT WILL CONTAIN -1)
MOVSI D,-NINIDV ;NUMBER OF DEVICES
MOVEM A,CHKDVD ;SAVE DEVICE DESCRIPTOR
ANDI A,DV%UNT ;GET UNIT
CAIN A,DV%UNT ;CHECK FOR -1
SETZ A,0 ;SET TO UNIT 0
HRRZM A,CHKDVU ;SAVE UNIT REQUESTED
SETZB B,CHKCSZ ;GET SIZE
CHKDVL: HLLZ A,CHKDVD ;GET DESCRIPTOR
ADD B,CHKCSZ ;POINT TO NEXT UNIT SET
HRRZ C,INIDVT+3(D) ;GET COUNT OF UNITS
ANDI C,DV%UNT ;MASK OFF UNIT BITS
CAIE C,DV%UNT ;CHECK FOR DV%UNT (-1)
SKIPN C ;CHECK FOR 0
MOVEI C,1 ;SET FOR 1 UNIT
MOVEM C,CHKCSZ ;SAVE SIZE
CAMG C,CHKDVU ;GGAL UNIT SIZE?
JRST CHKDV1 ;NOT LEGAL UNIT
HLLZ C,INIDVT+2(D) ;GET DEVICE DESCRIPTOR
TLZ C,777000 ;MASK UNITS
CAME A,C ;MATCH?
CHKDV1: JRST [ ADD D,BHC+DVTSTP-1 ;UPDATE COUNT
AOBJN D,CHKDVL ;TRY NEXT UNIT
JRST CHKDV4] ;NONE FOUND
MOVE C,B ;GET UNIT REQUESTED
ADD C,CHKDVU ;GET CURRENT UNIT
HRR A,DEVUNT(C) ;GET CURRENT UNIT AND FLAGS
HLL A,DEVCHR(C) ;GET CHARACTERISTICS
TLZ A,777000 ;GET RID OF .DV BITS
CAME A,CHKDVD ;CHECK TO SEE IF DEVICE MATCH
JRST CHKDV1 ;NO TRY NEXT ONE
;DEVICE HAS BEEN FOUND. LOAD DEV AND C TO RETURN TO CALLER
MOVE B,C ;GET OFFSET INTO TABLES
MOVE A,DEVCH1(B) ;GET SECOND CHARACTERISTICS WORD
TXNE A,D1%NIU ;IS SLOT IN USE?
JRST CHKDV4 ;NO
HRRZ A,CHKDVU ; Leave unit in a
MOVE DEV,DEVDSP(B) ;GET DISPATCH ADDRESS
HRL DEV,A ;DEV/ (UNIT,,DISPATCH ADDRESS)
MOVE C,DEVCHR(B) ;C/ CHARACTERISTICS
RETSKP
;LEFT HALF IS ZERO. THIS IS EITHER (0,,-1) FOR CONTROLLING TERMINAL
;OR 400000+TERMINAL NUMBER. IF THE LATTER, MAKE UP 600012,,TERMINAL NUMBER AND
;TRY IT AGAIN
TTYDEV: CAIN A,.CTTRM ;WANT CONTROLLING TERMINAL
JRST CTTYDV ;YES - GET IT
TRZN A,.TTDES ;NO. GET TERMINAL NUMBER
RETBAD (DEVX1) ;RETURN INVALID DESIGNATOR
HRLI A,.DVDES+.DVTTY ;GENERATE ordinary device designator
JRST CHKDS1 ; And try again
;GET CONTROLLING TERMINAL AND GO TRY AGAIN
CTTYDV: MOVE B,JOBNO
HRLZI A,JOBPT(B)
HRRI A,DISGET
SKIPGE B,JOBPT(B)
MDISMS
HLRZ A,B ;GET CONTROLLING TERMINAL (MAY BE -1 AGAIN)
TXO A,.TTDES ;MAKE IT A TERMINAL DESIGNATOR
JRST TTYDEV
;DEVICE NOT KNOWN
CHKDV4: SKIPL A,STRNXX ;IF STR FOUND - RELEASE IT
CALL ULKSTR ;UNLOCK STRUCTURE
MOVEI A,DEVX1
RET ; Illegal designator
;DSKOK - SEE IF THE DEVICE IS DSK
; BLCAL. DSKOK,<X>
; WHERE X IS A DEVICE DISPATCH TABLE ADDRESS, E.G. FILDEV(JFN)
; RETURN +1: NOT DSK
; +2: DSK
DSKOK:: BLSUB. <DTB>
SAVEAC <T1>
HRRZ T1,DTB
CAIE T1,DSKDTB ;THE DSK DTB?
RET ;NO
RETSKP ;YES
ENDBS.
;MDDOK - SEE IF THE DEVICE SUPPORTS MULTIPLE-DIRECTORY FUNCTIONS
; BLCAL. MDDOK,<X>
; WHERE X IS A DEVICE DISPATCH TABLE ADDRESS, E.G. FILDEV(JFN)
; RETURN +1: NOT MDD
; +2: MDD
MDDOK:: BLSUB. <DTB>
SAVEAC <T1>
HRRZ T1,DTB
CALL FNDUX ;GET DEVICE TABLE INDEX
TDZA T1,T1 ;NO SUCH, USE 0
MOVE T1,DEVCHR(T1) ;GET CHARACTERISTICS
TXNN T1,DV%MDD ;MDD DEVICE?
RET ;NO
RETSKP ;YES
ENDBS.
;TSTCHR - TEST FOR SPECIFIED BITS IN DEVCHR, SKIP IF NOT 0
; BLCAL. TSTCHR,<[BITS],DEV>
; WHERE BITS IS A MASK TO BE USED
; X IS A DEVICE DISPATCH TABLE ADDRESS, E.G. FILDEV(JFN)
; RETURN +1: ALL MASKED BITS 0
; +2: NOT ALL MASKED BITS 0
TSTCHR::BLSUB. <CBITS,DTB>
SAVEAC <T1>
HRRZ T1,DTB
CALL FNDUX ;GET DEVICE TABLE INDEX
TDZA T1,T1 ;NO SUCH, USE 0
MOVE T1,DEVCHR(T1) ;GET CHARACTERISTICS
TDNN T1,CBITS ;TEST AGAINST ARG
RET
RETSKP
ENDBS.
;FIND INDEX FOR SPECIFIC UNIT
; JFN/ A JFN, SHIFTED TO POINT TO JFN BLOCK
; RETURN +1: A/ INDEX TO DEVICE TABLES
;FILDEV AND INIDVT+3 HAVE (UNIT NUMBER,,DISPATCH ADDRESS)
;IF THERE ARE NO UNITS, FILDEV HAS -1; INIDVT HAS 0
FNDUNT::SKIPN T1,FILDEV(JFN) ;GET DEVICE INFO
SKIPE T1,DEV ;FILDEV=0, SO TRY DEV INSTEAD
CALL FNDUX ;LOOKUP
BUG.(HLT,NOFNDU,DEVICE,SOFT,<FNDUNT - Cannot find device for JFN>,,<
Cause: The block that describes the JFN, or the table used to initialize
the device for the JFN, is clobbered or zero. If this JFN is not
locked, another fork may have closed this JFN or otherwise modified
FILXXX variables, causing this situation.
>)
RET ;SUCCESS
FNDUX: SASUBR <FNDA,FNDB,FNDC,FNDD>
MOVSI B,-<NINIDV/DVTSTP>;SETUP TO SCAN INITIAL DEVICE TABLE
FNDU1: HRRZ C,FNDA ;GET DISPATCH TABLE ADDRESS FOR JFN
HRRZ A,INIDVT+1(B) ;GET DISPATCH TABLE ADDRESS FOR DEVICE
CAMN A,C ;SAME AS JFN?
JRST FNDU2 ;YES, HAVE FOUND PROPER DEVICE
FNDU3: ADDI B,DVTSTP-1 ;SKIP TO NEXT DEVICE
AOBJN B,FNDU1
RET ;NOT FOUND
;DISPATCH ADDRESSES MATCH. SEE IF AGREE ON UNIT VS NON-UNIT DEVICE
FNDU2: HLRZ A,FNDA ;GET UNIT NUMBER FOR JFN
HLRZ C,INIDVT+1(B) ;GET OFFSET IN DEVXXX TABLES FOR FIRST UNIT
HRRZ D,INIDVT+3(B) ;GET UNIT NUMBER FOR DEVICE IN TABLE
CAIN A,-1 ;DOES DEVICE IN JFN BLOCK HAVE UNITS?
JRST FNDU4 ;NO.
JUMPE D,FNDU3 ;YES. DOES THIS DEVICE HAVE UNITS?
ADD A,C ;YES. GET OFFSET IN DEVXXX TABLES FOR THIS UNIT
MOVEM A,FNDA
RETSKP
;NOT A UNIT DEVICE
FNDU4: JUMPN D,FNDU3 ;DOES THIS DEVICE HAVE UNITS?
MOVEM C,FNDA ;NO. POINT TO ENTRY IN DEVXXX TABLES
RETSKP
; Convert number to sixbit characters
NUMSIX: ;CONVERT NUMBER IN T1 TO SIXBIT
SAVEAC <T2,T3,T4> ;SAVE OTHER ACS
ANDI T1,777 ;TURN OFF UNWANTED BITS
SETZ T4, ;ZERO THE COUNT
NUMSXL: ;LOOP FOR GETTING CHARACTERS
IDIVI T1,10 ;GET AN OCTAL DIGIT
ADDI T2,20 ;CONVERT TO SIXBIT
PUSH P,T2 ;SAVE IT ON THE STACK
SKIPE T1 ;ARE WE DONE?
AOJA T4,NUMSXL ;NO SO KEEP GETTING DIGITS
MOVE T3,[POINT 6,T1] ;YES SO GET BYTE POINTER
NUMSX2: ;LOOP FOR SOTRING SIXBIT
POP P,T2 ;GET A CHARACTER OFF THE STACK
IDPB T2,T3 ;PUT IT WHERE IT BELONGS
SOJGE T4,NUMSX2 ;LOOP FOR ALL THE CHARACTERS
RET ;RETURN TO CALLER
;ROUTINE TO MAKE SURE DEVICE IS AVAILABLE TO THE JOB. IT PRESERVES
;A,B,C,D (T1,T2,T3,T4).
;CALL: B ;AS SET UP BY CHKDES
; DEV ;"
; CALL DEVAV ;IS DEVICE AVAILABLE TO THIS JOB ?
;RETURN:
; +1 ;NO.
; +2 ;YES
DEVAV:: SAVET ;PRESERVE TEMPS FOR CALLER
EA.ENT
HLRZ D,DEVUNT(B);GET ASSIGNER'S JOB #
CAMN D,JOBNO ;ASSIGNED BY THIS JOB ?
RETSKP ;YES, SO DEVICE IS AVAILABLE.
CAIE D,-1 ;IS DEVICE UNASSIGNED ?
JRST DEVAV9 ;ASSIGNED TO SOMEONE ELSE, INVESTIGATE PTY POSSIBILITY
MOVEI B,0(DEV) ;GET DEVICE TYPE OF UNASSIGNED DEVICE
CAIN B,PTYDTB ;A PTY?
JRST DEVAV1 ;YES.
CAIN B,TTYDTB ;TTY?
JRST DEVAV2 ;YES, MAYBE A PTY.
CAIN B,MTADTB ;IS THIS A MAGTAPE?
JRST [ HLRZ B,DEV ;YES, SEE IF IT IS REALLY THERE
SKIPN MTCUTB(B) ;IS THERE A DRIVE PHYSICALLY THERE?
RET ;NO
JRST .+1] ;YES
RETSKP ;DEVICE IS O.K.
DEVAV1: HLRZ B,DEV ;GET UNIT # OF PTY
CALL PTYTTY ;CONVERT TO TTY NUMBER
MOVEI A,.TTDES(B) ;GET TERMINAL DESIGNATOR (400000+N)
DEVAV3: PUSH P,DEV ;SAVE ORIGINAL DEVICE
CALL CHKDES ;GET INDEX FOR TABLES
BUG.(CHK,DEVUCF,DEVICE,SOFT,<DEVAV - Unexpected CHKDES failure>,,<
Cause: While checking to see if a device is available to the job,
an invalid device designator was passed to a subroutine.
Action: If this problem persists, submit a dump provided by the DOB%
facility or create a dump by changing this to a BUGHLT. Look
at the dump and see who the caller is that is passing in bad
information.
>)
POP P,DEV ;RESTORE ORIGINAL DEVICE
HLRZ A,DEVUNT(B) ;SEE WHO ASSIGNED THE TTY
CAME A,JOBNO ;THIS JOB?
CAIN A,-1 ;OR NOONE?
RETSKP ;YES, SO IT'S AVAILABLE
RET ;DEVICE NOT AVAILABLE
DEVAV2: HLRZ A,DEV ;GET TTY UNIT #
CALL CHKPTY ;IS IT A PTY?
RETSKP ;NO, SO IT'S AVAILABLE
HRLI A,.DVDES+.DVPTY ;MAKE PTY DEVICE DESIGNATOR
JRST DEVAV3 ;GO CHECK FOR PTY AVAILABILITY
DEVAV9: MOVEI A,TTYDTB
CAIE A,(DEV) ;IS THIS DEVICE A TERMINAL?
RET ;NO SO DEVICE IS DEFINITELY NOT AVAILABLE
HLRZ A,DEV ;YES, GET ITS LINE NO
CALL PTCHKA ;SEE IF THIS TTY CONTROLLED BY OUR OWN PTY
JUMPGE A,R ;NO, SO IT'S UNAVAILABLE
RETSKP ;YES SO IT'S AVAILABLE
; Routine to convert ascii to sixbit
; Call: A ; Lookup pointer
; CALL ASCSIX ; For six characters
; Or
; CALL ASC3SX ; For three characters
;RETURNS +1: ERROR, TOO MANY CHARS OR NON-SIXBIT CHAR ENCOUNTERED
; +2: SUCCESS, A/ SIXBIT, B/ MASK
ASCSIX::SKIPA C,[6]
ASC3SX::MOVEI C,3
HRLI A,(<POINT 7,0,35>)
PUSH P,A
SETZB A,B
PUSH P,D
ASCSX1: ILDB D,-1(P)
JUMPE D,ASCSX3 ; Null, done
SOJL C,ASCSXR ; Too many characters, error
SUBI D,40
JUMPL D,ASCSXR ; Not sixbit
CAIL D,100
JRST ASCSXR
ROTC A,6
IOR A,D
IORI B,77
JRST ASCSX1
ASCSX4: ROTC A,6
ASCSX3: TLNN B,770000 ;TEST MASK FOR COMPLETION
JUMPN A,ASCSX4
AOS -2(P)
ASCSXR: POP P,D
POP P,C
RET
;DUMMY ROUTINES FOR BIDIRECTIONAL I/O
BIOINP::TQOE <FILINP> ;ALREADY DOING INPUT?
RET ;YES. ALL DONE THEN
TQZ <FILOUP> ;NO. SO NOT DOING OUTPUT ANYMORE
RET ;AND DONE
;FO OUTPUT NOW
BIOOUT::TQOE <FILOUP> ;NOW DOING OUTPUT?
RET ;YES. DONE
TQZ <FILINP> ;NO. SO NOT DOING OUTPUT ANYMORE
RET ;AND DONE
TNXEND
END