Trailing-Edge
-
PDP-10 Archives
-
SRI_NIC_PERM_SRC_3_19910112
-
mm/mbstat.mac
There are no other files named mbstat.mac in the archive.
;[SRI-NIC]SRC:<MM>MBSTAT.MAC.3, 17-Mar-87 19:00:17, Edit by VIVIAN
; Make this do the bulk mail queue
TITLE MBSTAT
COMMENT /
This is the "user" portion of the mail status query program. It passes
the user's name, controlling TTY #, privilege flag and login directory #
to the <OPERATOR>MBLST program (running in background under SMTPSV job)
via IPCF. MBLST (a hacked version of Tom Rindfleisch's QDMAIL) does all
the actual file work for both MAILQ: and the user's login directory.
This mail status program runs in non-privileged and privileged modes. In
non-privileged mode the user is shown MAILQ: files with sender name identical
to user name, and all mail files in the user's login directory. In
privileged mode (WHEEL or OPERATOR capabilities enabled) the user is shown
all mail files in MAILQ: and the user's login directory.
Mail files are reported in the following formats:
Non-Privileged:
Trying PS:<MAIL.QUEUE>...
You have mail in the queue:
To: [email protected]
Subject: MSTAT sample
Queued: 17-Oct-83 11:21:21
Until: 23-Oct-83 00:00:00
Trying PS:<MILES>...
You have no outgoing mail in PS:<MILES>
Privileged:
Trying PS:<MAIL.QUEUE>...
[Retransmit Queued Mail]
From: [email protected]
To: [email protected]
Subject: MSTAT sample
Queued: 17-Oct-83 11:21:21
Until: 23-Oct-83 00:00:00
Trying PS:<MILES>...
/
SEARCH MONSYM
SEARCH MACSYM
.TEXT "MBSTAT/SAVE"
VWHO==0
VMAJOR==5 ;TOPS-20 release 5.3
VMINOR==3
VMSTAT==^D2 ;MBSTAT's version number
A=1
B=2
C=3
D=4
T=11
U=12
V=13
W=14
;This PID descriptor block (among other things) freely adapted from MRC's MM
PIDGET: IP%CPD ;Create a PID to use as sender's PID
PIDNUM: 0 ;PID of sender
0 ;PID of receiver (0 for INFO)
END1-.,,.+1 ;length,,addr of message
1,,.IPCIW ;get PID associated with name
0 ;no duplicates to receive INFO response
PIDNAM: ASCIZ/[SYSTEM]MBLST/ ;name of mail query server
END1==.-1
RCVBF: BLOCK 10 ;Buffer for receiving messages
MPID: BLOCK 1 ;MBLST's PID
; Next block of data used for MBSTAT ---> MBLST communications
USRSTR: BLOCK 8 ;User name string
TTYNUM: BLOCK 1 ;Controlling TTY number
PRVFLG: BLOCK 1 ;User's enabled priv's flag
USRDIR: BLOCK 1 ;User's login directory number
; Program entry vector
ENTVEC: JRST START ;Normal entry
JRST START ;REENTER entry
BYTE(3)VWHO(9)VMAJOR(6)VMINOR(18)VMSTAT
ENTVCL==.-ENTVEC
START: RESET%
SETZM PRVFLG ;Assume no privileges
MOVEI A,.FHSLF
RPCAP%
TXNE C,SC%WHL!SC%OPR ;Wheel or Operator priv's enabled
SETOM PRVFLG ; lets user look at all queued files
MOVEI A,4 ;Length of packet descriptor block
MOVEI B,PIDGET ;Address of PDB
MSEND% ;Get a PID and assign the name to it
ERJMP PIDERR ;Something went wrong...
; Get the response from <SYSTEM>INFO
LOOP: SETZB T,U ;No flags, any sender
MOVE V,PIDGET+.IPCFS ;Receiver PID
MOVE W,[10,,RCVBF] ;Buffer length,,Address
MOVEI A,4 ;Length of PDB
MOVEI B,T ;Address of PDB
MRECV% ;Get message from INFO
ERJMP PIDERR ;Something went wrong
LOAD U,IP%CFC,T ;See who sent message
CAIE U,.IPCCC ;From <SYSTEM>IPCF
CAIN U,.IPCCF ;Or <SYSTEM>INFO?
CAIA ;Yes, good
JRST LOOP ;No, get another message
TXNE T,IP%CFE ;Was it undeliverable?
JRST GETERR
JUMPN A,LOOP ;There's more in the queue, so this probably
;wasn't the right message (this shouldn't
;happen)
MOVE A,RCVBF+1 ;Save MBSTAT's PID
MOVEM A,MPID
; get user name
GJINF% ;Get job information
JUMPL D,HALT ;This shouldn't happen
MOVEM D,TTYNUM ;TTY #
MOVEM A,T ;Save user # DIRST
MOVE B,A ;User # to AC2 for RCDIR
SETZ A, ;No flags
RCDIR% ;Get directory number
MOVEM C,USRDIR ;Put in message block
MOVE B,T ;User # to AC2 for DIRST
MOVE A,[POINT 7,USRSTR] ;pointer for name string in AC1
DIRST% ;convert user # to user name
ERJMP DIRERR ;to DIRERR if error
; Send data block to MBLST, wait for signal that it's finished
SETZ T, ;No flags
MOVE U,PIDNUM ;Sender PID
MOVE V,MPID ;Receiver PID
MOVE W,[^D11,,USRSTR] ;Length,,Address
MOVEI A,4 ;PDB length
MOVEI B,T ;PDB address
MSEND% ;Send it
ERJMP PIDERR ;Something went wrong
; Set up to receive message from MBLST
GETMES: SETZB T,U ;No flags, no sender PID
MOVE V,PIDNUM ;Receiver PID
MOVE W,[1,,RCVBF] ;Length,,Address
MOVEI A,4 ;PDB length
MOVEI B,T ;PDB address
MRECV% ;Wait for message
ERJMP PIDERR ;Something went wrong...
JUMPN A,GETMES ;There's still something in the queue, so
; clean it up before we're done
HALT: HALTF% ;normal program halt
JRST START ;we can continue
SUBTTL Error subroutines
DIRERR: HRROI A,[ASCIZ/
? DIRST Error: /]
JRST ERROUT
PIDERR: HRROI A,[ASCIZ/
? IPCF error: /]
JRST ERROUT
GETERR: HRROI A,[ASCIZ/
? Can't get MBLST'S PID - can't continue/]
PSOUT%
JRST HALT
ERROUT: PSOUT% ;output local error message
MOVE A,[.PRIOU] ;output JSYS error message to TTY
MOVE B,[.FHSLF,,-1] ;current process,,last error
SETZ C, ;no limit on message length
ERSTR% ;output message
JFCL ;ignore errors for string output...
JFCL ; ...
JRST HALT
END <ENTVCL,,ENTVEC>