Trailing-Edge
-
PDP-10 Archives
-
SRI_NIC_PERM_SRC_3_19910112
-
monitor/rsxsrv.mac
There are 19 other files named rsxsrv.mac in the archive. Click here to see a list.
;[SRI-NIC]SRC:<MONITOR>RSXSRV.MAC.4, 2-May-90 14:05:35, Edit by ZZZ
; In STPLNF - switched which line-disable code we use. Used to use
; Stanford's, now use DEC's. Did this by swapping conditionals;
; ** these conditionals need to be swapped back!! **
; Edit= 8933 to RSXSRV.MAC on 23-Aug-88 by LOMARTIRE
;Improve BUG. documentation
;[SRI-NIC]SRC:<MONITOR>RSXSRV.MAC.2, 28-Nov-88 14:25:56, Edit by MKL
;v7 merge
;;SS:<6-1-MONITOR>RSXSRV.MAC.4, 25-Nov-85 09:58:57, Edit by KNIGHT
;; Getting cut off in the middle of a Kermit is nonsense. Up threshold at
;; BIGST2.
;<6-1-MONITOR.FT6>RSXSRV.MAC.3, 12-Aug-85 18:13:59, Edit by WHP4
;Stanford changes:
; Count TTYSTP's, disable line for 5 min, not 5 sec. Never stop console.
; UPD ID= 8640, RIP:<7.MONITOR>RSXSRV.MAC.5, 11-Feb-88 20:16:52 by RASPUZZI
;TCO 7.1223 - Put back the ! that ended a comment. It got ripped out by
; previous edit.
; UPD ID= 8609, RIP:<7.MONITOR>RSXSRV.MAC.4, 11-Feb-88 17:18:50 by GSCOTT
;TCO 7.1218 - Update copyright date.
; UPD ID= 8442, RIP:<7.MONITOR>RSXSRV.MAC.3, 4-Feb-88 16:22:48 by GSCOTT
;TCO 7.1210 - We don't want a dump of TTYSTP, set it normally not dumpable.
; *** Edit 7435 to RSXSRV.MAC by GSCOTT on 3-Apr-87, for SPR #21488
; Enable control of DTR on RSX20F lines by MTOPR functions .MOHUP and .MOUHU
; and raise and lower DTR when a TTY is opened and closed if it's not CTRLTT
; *** Edit 7342 to RSXSRV.MAC by RASPUZZI on 28-Jul-86, for SPR #20938
; Get rid of a race condition between TTYSRV and RSXSRV by putting the XON/XOFF
; logic in TTCH7 (TTYSRV) after chars have been moved from TTBBUF to their
; individual line buffers.
; *** Edit 7310 to RSXSRV.MAC by RASPUZZI on 2-Jun-86
; Prevent SKDPF1 BUGHLTs by making TTNTM1, TTSNTF & FENTM resident routines
; *** Edit 7195 to RSXSRV.MAC by JROSSELL on 15-Nov-85
; Do not allocate space when setting line speed for an unprileged user from a
; remote or autobaud terminal
; UPD ID= 2177, SNARK:<6.1.MONITOR>RSXSRV.MAC.5, 5-Jun-85 10:58:25 by MCCOLLUM
;TCO 6.1.1406 - Update copyright notice.
; UPD ID= 1930, SNARK:<6.1.MONITOR>RSXSRV.MAC.4, 7-May-85 22:09:41 by MCCOLLUM
;TCO 6.1.1238 - Fix BUG. documentation
; UPD ID= 957, SNARK:<6.1.MONITOR>RSXSRV.MAC.3, 5-Nov-84 19:17:03 by PRATT
;TCO 6.1.1032 - Make TTYSRV compile independently:
; Create RSXSRV.MAC and move FE code to it from TTPHDV
; Duplicate the TTPHDV edit history here and in NRTSRV.MAC
; Make many symbols global for TTYSRV
; UPD ID= 941, SNARK:<6.1.MONITOR>TTPHDV.MAC.22, 1-Nov-84 14:49:14 by PRATT
;Merge m60: edit 4900
; UPD ID= 4900, SNARK:<6.MONITOR>TTPHDV.MAC.91, 8-Oct-84 05:07:38 by TBOYLE
;TCO 6.2238 - handle speed setting properly.
; UPD ID= 930, SNARK:<6.1.MONITOR>TTPHDV.MAC.20, 28-Oct-84 11:12:08 by PRATT
;TCO 6.1.1022 - Add support code for NTINF jsys:
; Add field NRRID for remote host ID
; Do a read connect info to get the remote host ID just before accepting
; UPD ID= 713, SNARK:<6.1.MONITOR>TTPHDV.MAC.18, 26-Jul-84 08:31:11 by MCINTEE
;Add CTERM - NRT support
; UPD ID= 578, SNARK:<6.1.MONITOR>TTPHDV.MAC.17, 29-May-84 14:57:05 by MCINTEE
;Fix another of previous
; UPD ID= 575, SNARK:<6.1.MONITOR>TTPHDV.MAC.16, 29-May-84 13:19:03 by MCINTEE
;Fix detach/attach bug in NRT (TNUKIL)
; UPD ID= 545, SNARK:<6.1.MONITOR>TTPHDV.MAC.15, 23-May-84 07:49:45 by MCINTEE
;Merge from M60:
; UPD ID= 4178, SNARK:<6.MONITOR>TTPHDV.MAC.89, 7-May-84 13:32:27 by LOMARTIRE
;More TCO 6.2047 - Fix all possible cases of PI 6 NOSKED/OKSKED from TTYDED
; UPD ID= 381, SNARK:<6.1.MONITOR>TTPHDV.MAC.14, 12-Mar-84 14:58:09 by MCINTEE
;Fix logout bug in NRT.
; UPD ID= 332, SNARK:<6.1.MONITOR>TTPHDV.MAC.13, 13-Feb-84 14:35:32 by MCINTEE
;Make NRTSOF get more buffers
; UPD ID= 293, SNARK:<6.1.MONITOR>TTPHDV.MAC.12, 16-Jan-84 08:33:37 by MCINTEE
;Merge from M60:
; UPD ID= 3397, SNARK:<6.MONITOR>TTPHDV.MAC.88, 3-Jan-84 10:38:46 by PRATT
;TCO 6.1796 - Create TTNTM1, sets/clears TTNTS in fe only.
; UPD ID= 286, SNARK:<6.1.MONITOR>TTPHDV.MAC.11, 5-Jan-84 17:33:38 by NICHOLS
;Fix previous edit, it should give up (RET), not go to MCSRV2 or MCSRV5
; UPD ID= 282, SNARK:<6.1.MONITOR>TTPHDV.MAC.10, 27-Dec-83 23:23:52 by GROSSMAN
;Fix bug in MCSRV when NRTUNB fails, go to MCSRV2, not MCSRV5.
; UPD ID= 218, SNARK:<6.1.MONITOR>TTPHDV.MAC.9, 17-Oct-83 15:48:54 by MCINTEE
;Change IBFRCC to IBRFC1
; UPD ID= 197, SNARK:<6.1.MONITOR>TTPHDV.MAC.8, 25-Aug-83 07:55:07 by MCINTEE
;TCO 6.1784 - In TTSETH, fix logic that sets TTNPM
; UPD ID= 191, SNARK:<6.1.MONITOR>TTPHDV.MAC.7, 5-Aug-83 12:29:25 by MCINTEE
;Yet another NRT bug fix. Add a SETZRO TTOTP in NETUSER release code.
; UPD ID= 189, SNARK:<6.1.MONITOR>TTPHDV.MAC.6, 4-Aug-83 09:46:46 by MCINTEE
;TCO 6.1718 - Fix code so LOCAL AUTOBAUD lines don't get the REMOTE bit set
; when the speed is recieved from the FE
; UPD ID= 187, SNARK:<6.1.MONITOR>TTPHDV.MAC.5, 2-Aug-83 15:52:22 by MCINTEE
;More TCO 6.1426 - remove an extra SETZRO TTPRM
;TCO 6.1600 - Allow LOCAL lines to be set as autobaud
; UPD ID= 104, SNARK:<6.1.MONITOR>TTPHDV.MAC.8, 18-Apr-83 13:12:19 by PAETZOLD
;TCO 6.1557 - TCP Merge
; UPD ID= 94, SNARK:<6.1.MONITOR>TTPHDV.MAC.7, 28-Mar-83 14:03:38 by MCINTEE
;Do the previous edit in a cleaner manner
; UPD ID= 93, SNARK:<6.1.MONITOR>TTPHDV.MAC.6, 28-Mar-83 12:35:46 by MCINTEE
;Fix bug in NRT that causes an occasional NSKDIS bughlt.
; UPD ID= 2039, SNARK:<6.MONITOR>TTPHDV.MAC.83, 20-Mar-83 12:46:39 by HALL
;TCO 6.1502 - Allow resident free space in extended section
; Use one-word global byte pointers to point to sendall buffer and
; I/O buffers, which must be in section 0 for the DTE.
; Convert one-word global to one-word local before handing to DTESRV
; Change handling of end of I/O buffers, and definition of WRPMSK,
; to reflect use of one-word globals
; In FNDEND, use ADJBP to decrement byte pointer instead of previous hack
; UPD ID= 1985, SNARK:<6.MONITOR>TTPHDV.MAC.82, 14-Mar-83 08:48:34 by HALL
;TCO 6.1502 - Allow resident free space in extended section
; Add EA.ENT to TTDTRM
; UPD ID= 1970, SNARK:<6.MONITOR>TTPHDV.MAC.81, 10-Mar-83 19:11:06 by HALL
;TCO 6.1502 - Allow resident free space in extended section
; Add EA.ENT to TTYINT,TTSPST,TTYDON,TTYDLU,TTYHGU,TTYSLA,IDCTY,
; DTESTO,DFNDL1
; UPD ID= 1945, SNARK:<6.MONITOR>TTPHDV.MAC.80, 9-Mar-83 10:16:58 by HALL
;TCO 6.1502 - Allow resident free space in extended section
; Change call to ASGRSB to set RS%SE0
; UPD ID= 4, SNARK:<6.1.MONITOR>TTPHDV.MAC.2, 2-Feb-83 07:38:59 by MCINTEE
;TCO 6.1485 - Fix TCO 6.1480, put TT%XFF in dynamic storage block.
; UPD ID= 1714, SNARK:<6.MONITOR>TTPHDV.MAC.78, 28-Jan-83 10:56:17 by MURPHY
;More 6.1390 - Add dummy symbol if no FE code.
; UPD ID= 1711, SNARK:<6.MONITOR>TTPHDV.MAC.77, 27-Jan-83 22:58:02 by WEAVER
;TCO 6.1480 - Only send XOFF/XON status to front-end if TTXFF (XOFF FORCE)
;is set.
; UPD ID= 1572, SNARK:<6.MONITOR>TTPHDV.MAC.76, 27-Dec-82 08:30:12 by GRANT
;TCO 6.1426 - When closing an NVT connection, don't undo TTPRM if the line
; is an MCB TTY or the CTY
; UPD ID= 1533, SNARK:<6.MONITOR>TTPHDV.MAC.75, 14-Dec-82 09:55:48 by MURPHY
;TCO 5.1.1114 - Index needed at SNDXN2+8L to fix XOFF/XON for incoming chars.
; UPD ID= 1489, SNARK:<6.MONITOR>TTPHDV.MAC.74, 30-Nov-82 11:45:34 by WEAVER
;TCO 6.1393 - Use Break Through Write to send XONs and XOFFs to a line
; UPD ID= 1485, SNARK:<6.MONITOR>TTPHDV.MAC.73, 29-Nov-82 13:36:14 by MURPHY
;TCO 6.1390 - Shut off 20F line if more than 2 noise characters in 1 second.
; UPD ID= 1332, SNARK:<6.MONITOR>TTPHDV.MAC.72, 13-Oct-82 07:04:19 by GRANT
;More of previous edit - fix bug in TNTCLS's debugging code
; UPD ID= 1312, SNARK:<6.MONITOR>TTPHDV.MAC.71, 9-Oct-82 10:28:22 by GRANT
;TCO 5.1.1089 - Rewrite TNTCLS, save link IDs rather than LL block addresses
; UPD ID= 1086, SNARK:<6.MONITOR>TTPHDV.MAC.70, 16-Aug-82 14:31:44 by MURPHY
;TCO 6.1202 - Pass proper arg to TTCBF9 at TINET3.
; UPD ID= 994, SNARK:<6.MONITOR>TTPHDV.MAC.69, 18-Jul-82 13:52:18 by MURPHY
;TCO 5.1.1048 - Add TTCLSH to clear "set host" state when closing LL.
; UPD ID= 991, SNARK:<6.MONITOR>TTPHDV.MAC.68, 18-Jul-82 13:30:31 by MURPHY
;TCO 5.1.1047 - Put NOSKED before call to TNTCLS to interlock ULLCZQ.
; UPD ID= 990, SNARK:<6.MONITOR>TTPHDV.MAC.67, 18-Jul-82 13:28:02 by MURPHY
;TCO 5.1.1046 - Check TTNUS before call to TNUREC.
; UPD ID= 970, SNARK:<6.MONITOR>TTPHDV.MAC.66, 30-Jun-82 08:55:45 by GRANT
;TCO 5.1.1038 - Remove CALL SQIACK in DECnet NVT processor
; UPD ID= 328, SNARK:<6.MONITOR>TTPHDV.MAC.58, 19-Jan-82 15:23:21 by MURPHY
;TCO 5.1688 - report TTYSTP only once per line
; UPD ID= 851, SNARK:<6.MONITOR>TTPHDV.MAC.65, 6-Jun-82 13:29:44 by MURPHY
;TCO 6.1147 - Move bugdefs from BUGS.MAC to here and put them in-line.
; UPD ID= 819, SNARK:<6.MONITOR>TTPHDV.MAC.64, 3-Jun-82 07:42:18 by GRANT
;TCO 6.1154 - Fix failure return from CALL SNDCHK in MCSTRO.
;Change comment in CHKLLT.
; UPD ID= 800, SNARK:<6.MONITOR>TTPHDV.MAC.63, 1-Jun-82 08:31:46 by GRANT
;TCO 6.1148 - Remove code which breaks DECnet connection when a character is
;received on a line on which there is no job
; UPD ID= 771, SNARK:<6.MONITOR>TTPHDV.MAC.62, 19-May-82 17:20:19 by MILLER
;TCO 6.1066 AGAIN. Make RSP output work in secondary protocol
; UPD ID= 505, SNARK:<6.MONITOR>TTPHDV.MAC.61, 16-Mar-82 07:01:10 by MILLER
; UPD ID= 476, SNARK:<6.MONITOR>TTPHDV.MAC.60, 13-Mar-82 14:49:59 by MILLER
;TCO 6.1066 AGAIN. Add some of the RSP support code
; UPD ID= 458, SNARK:<6.MONITOR>TTPHDV.MAC.59, 11-Mar-82 11:47:06 by MILLER
;TCO 6.1066. Make MCSRV internal
; UPD ID= 328, SNARK:<6.MONITOR>TTPHDV.MAC.58, 19-Jan-82 15:23:21 by MURPHY
;TCO 5.1688 - report TTYSTP only once per line
; UPD ID= 150, SNARK:<6.MONITOR>TTPHDV.MAC.57, 21-Oct-81 12:14:07 by GRANT
;TCO 5.1594 - Move code from MCTYI2 and MCTYI3 into NSPSRV
; UPD ID= 193, SNARK:<5.MONITOR>TTPHDV.MAC.56, 17-Sep-81 13:19:49 by GRANT
;Reinstate the UPD ID=153 edit. Also, it should say TCO 5.1490 no 5.1409
; UPD ID= 172, SNARK:<5.MONITOR>TTPHDV.MAC.55, 14-Sep-81 13:44:20 by GRANT
;Temporarily undo previous edit
; UPD ID= 153, SNARK:<5.MONITOR>TTPHDV.MAC.54, 8-Sep-81 17:31:11 by GRANT
;Needed for TCO 5.1490 - Remove segment number handling in MCTYI3
; UPD ID= 172, SNARK:<5.MONITOR>TTPHDV.MAC.55, 14-Sep-81 13:44:20 by GRANT
;Temporarily undo previous edit
; UPD ID= 153, SNARK:<5.MONITOR>TTPHDV.MAC.54, 8-Sep-81 17:31:11 by GRANT
;Needed for TCO 5.1409 - Remove segment number handling in MCTYI3
;Minor changes needed for handling LLOMSG queue in MCTYI3 and MCTYI2
; UPD ID= 138, SNARK:<5.MONITOR>TTPHDV.MAC.53, 2-Sep-81 16:38:01 by GRANT
;Eliminate cause of OKSKBG BUGHLT - in TNHCLS, NOSKED before calling TTCOB5
; UPD ID= 2307, SNARK:<5.MONITOR>TTPHDV.MAC.52, 8-Jul-81 11:20:59 by MURPHY
;CALL REQNS INSTEAD OF TNUSND FROM TTCHI
; UPD ID= 2295, SNARK:<5.MONITOR>TTPHDV.MAC.51, 6-Jul-81 13:50:54 by MURPHY
;DEBUG CODE TO RECORD DEAD LINKS
;PROCESS ALL INPUT IN TINET BEFORE QUITTING
; UPD ID= 2269, SNARK:<5.MONITOR>TTPHDV.MAC.50, 29-Jun-81 17:48:31 by MURPHY
;ANTX01
; UPD ID= 2190, SNARK:<5.MONITOR>TTPHDV.MAC.49, 11-Jun-81 15:59:54 by MURPHY
;CHANGE TQNx TO TMNx REFLECTING CHANGE IN MACSYM
;DITTO
; UPD ID= 1867, SNARK:<5.MONITOR>TTPHDV.MAC.45, 21-Apr-81 23:41:55 by MURPHY
;DITTO
; UPD ID= 1865, SNARK:<5.MONITOR>TTPHDV.MAC.44, 21-Apr-81 18:29:43 by MURPHY
;DITTO
; UPD ID= 1830, SNARK:<5.MONITOR>TTPHDV.MAC.43, 17-Apr-81 14:19:33 by MURPHY
;MAKE LINE SHUTOFF FOR 5 SECONDS INSTEAD OF 3
;REVISE SENDALL LOGIC
;REVISE STARTUP LOGIC
; UPD ID= 1752, SNARK:<5.MONITOR>TTPHDV.MAC.42, 20-Mar-81 13:32:21 by MURPHY
;Ditto
; UPD ID= 1745, SNARK:<5.MONITOR>TTPHDV.MAC.41, 19-Mar-81 23:11:04 by MURPHY
;Fix problems with line shut-off and XOFF/XON logic.
; UPD ID= 1663, SNARK:<5.MONITOR>TTPHDV.MAC.40, 11-Mar-81 16:30:30 by MURPHY
;Fix up some failures of DTEQ which were not handled
; UPD ID= 1554, SNARK:<5.MONITOR>TTPHDV.MAC.39, 11-Feb-81 17:33:25 by MURPHY
;MAKE SURE LINE GETS RESTARTED AFTER STOP BECAUSE INBFR OR TTBBUF FULL
; UPD ID= 1550, SNARK:<5.MONITOR>TTPHDV.MAC.38, 10-Feb-81 17:57:41 by MURPHY
;FIX XOFF DURING SYSTEM STARTUP PROBLEM
;CHANGE NAMES TO BLSUB., BLCAL.
;DITTO
; UPD ID= 1477, SNARK:<5.MONITOR>TTPHDV.MAC.35, 22-Jan-81 12:24:13 by MURPHY
;FIX TTQAD PROBLEMS
; UPD ID= 1377, SNARK:<5.MONITOR>TTPHDV.MAC.34, 22-Dec-80 18:25:37 by MURPHY
;<5.MONITOR>TTPHDV.MAC.33, 17-Dec-80 18:10:33, EDIT BY MURPHY
;TNUREC
; UPD ID= 1361, SNARK:<5.MONITOR>TTPHDV.MAC.32, 17-Dec-80 15:46:27 by MURPHY
;CHKLLT
;<5.MONITOR>TTPHDV.MAC.31, 12-Dec-80 11:11:34, EDIT BY MURPHY
;<5.MONITOR>TTPHDV.MAC.30, 12-Dec-80 10:34:51, EDIT BY MURPHY
;<5.MONITOR>TTPHDV.MAC.29, 12-Dec-80 10:23:26, EDIT BY MURPHY
;FLOW CONTROL
;<5.MONITOR>TTPHDV.MAC.28, 9-Dec-80 15:16:03, EDIT BY MURPHY
;CKMCOU
;<5.MONITOR>TTPHDV.MAC.27, 5-Dec-80 16:49:34, EDIT BY MURPHY
;VARIOUS MCB FIXES AND ENHANCEMENTS
;<5.MONITOR>TTPHDV.MAC.25, 24-Nov-80 16:46:49, EDIT BY MURPHY
;Requeue line if SQILS or SQIACK fails
;<5.MONITOR>TTPHDV.MAC.24, 21-Nov-80 18:29:16, EDIT BY MURPHY
;FLUSH LINK IF INPUT AND NO JOB
; UPD ID= 1301, SNARK:<5.MONITOR>TTPHDV.MAC.23, 19-Nov-80 17:05:35 by MURPHY
;LOCAL XON,XOFF OPTION FOR NVTS
; UPD ID= 1290, SNARK:<5.MONITOR>TTPHDV.MAC.22, 18-Nov-80 16:45:45 by MURPHY
;<5.MONITOR>TTPHDV.MAC.21, 31-Oct-80 17:37:34, EDIT BY MURPHY
;<5.MONITOR>TTPHDV.MAC.20, 30-Oct-80 22:59:18, EDIT BY MURPHY
;<5.MONITOR>TTPHDV.MAC.19, 21-Oct-80 12:10:07, EDIT BY MURPHY
;<5.MONITOR>TTPHDV.MAC.18, 20-Oct-80 17:12:52, EDIT BY MURPHY
;<5.MONITOR>TTPHDV.MAC.17, 20-Oct-80 14:40:25, EDIT BY MURPHY
;<5.MONITOR>TTPHDV.MAC.16, 7-Oct-80 15:27:36, EDIT BY MURPHY
;<5.MONITOR>TTPHDV.MAC.15, 6-Oct-80 11:32:21, EDIT BY MURPHY
; UPD ID= 1126, SNARK:<5.MONITOR>TTPHDV.MAC.14, 5-Oct-80 15:02:40 by MURPHY
;DITTO
;<5.MONITOR>TTPHDV.MAC.13, 3-Oct-80 14:04:57, EDIT BY MURPHY
; UPD ID= 1120, SNARK:<5.MONITOR>TTPHDV.MAC.12, 3-Oct-80 12:21:22 by MURPHY
;DITTO
; UPD ID= 1113, SNARK:<5.MONITOR>TTPHDV.MAC.11, 3-Oct-80 01:00:51 by MURPHY
;NVT IMPROVEMENTS
; UPD ID= 1077, SNARK:<5.MONITOR>TTPHDV.MAC.10, 1-Oct-80 10:37:44 by MURPHY
;RELEVANT END STATEMENTS FOR STKVAR, ETC.
; UPD ID= 1063, SNARK:<5.MONITOR>TTPHDV.MAC.9, 30-Sep-80 10:16:58 by MURPHY
;DITTO
; UPD ID= 1057, SNARK:<5.MONITOR>TTPHDV.MAC.8, 26-Sep-80 12:13:03 by MURPHY
;MCB FIXES
; UPD ID= 944, SNARK:<5.MONITOR>TTPHDV.MAC.7, 20-Aug-80 20:09:15 by MURPHY
;MCB FIXES
; UPD ID= 925, SNARK:<5.MONITOR>TTPHDV.MAC.6, 20-Aug-80 10:21:12 by MURPHY
;INCLUDE MCB DEVICE
; UPD ID= 699, SNARK:<5.MONITOR>TTPHDV.MAC.5, 25-Jun-80 17:23:34 by MURPHY
;REMOVE TTDBEF REDUNDANT SUBROUTINE
;MERGE TTFEDV AND TTDZDV FILES INTO TTPHDV
;CHANGE DEVICE VECTORING
; UPD ID= 645, SNARK:<5.MONITOR>TTFEDV.MAC.4, 16-Jun-80 12:09:09 by MURPHY
;CLEAN UP VECTOR COMMENTS
; UPD ID= 443, SNARK:<5.MONITOR>TTFEDV.MAC.3, 15-Apr-80 09:41:02 by KONEN
;TCO 4.1.1143 -- Check for XOFF before storing character in big buff.
; UPD ID= 405, SNARK:<5.MONITOR>TTFEDV.MAC.2, 3-Apr-80 16:06:55 by HALL
;CHANGES TO WRITE-PROTECT THE RESIDENT MONITOR:
; CHANGE ALL REFERENCES TO TT1LIN TO EXPECT A TABLE
;<4.1.MONITOR>TTFEDV.MAC.52, 16-Nov-79 11:29:17, EDIT BY MILLER
;ASGALL NOW SKIPS
;<4.MONITOR>TTFEDV.MAC.51, 1-Nov-79 17:15:09, EDIT BY MILLER
;Previous edit lines deleted
; COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1976, 1988.
; ALL RIGHTS RESERVED.
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
; ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
; INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
; COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
; OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
; TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
; AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
; CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
; SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
SEARCH TTYDEF,PROLOG
TTITLE (RSXSRV,RSXSRV,< - Front End Terminal Support>)
RESCD
SUBTTL FRONT-END DEPENDENT CODE
;THIS MODULE IS NECESSARY TO SUPPORT THE KL10 -DTE20 INTERFACE
;FOR TTYSRV. IT DOES ALL THE DEVICE SPECIFIC FUNCTIONS AND
;PROCESSES DATA TO AND FROM THE FRONT END.
MAXABC==TTBSIZ/2 ;MAX ENTRIES ALLOWED IN BIGBUF FOR THIS
; LINE WHEN LINE IS SHUT OFF
;(CAN'T BE IN TTYDEF BECAUSE TTBSIZ IS DEFINED
; IN STG)
;DEFINITIONS FOR TTDEV FOR FE TYPE LINES
;DEFINITIONS FOR TT.FE LINE TYPE
DEFSTR TTFCT,TTDEV,27,8 ;NUMBER BYTES IN FRONT END
DEFSTR TTFMC,TTDEV,35,8 ;MAX BYTES IN FRONT END
SPCLIN==4 ;HIGHEST SPECIAL LINE NUMBER
RS TOTFCT,1 ;TOTAL BYTES IN FE
RS MAXFCT,1 ;TOTAL CAPACITY OF FE
COMMENT ! ;FOR INFO ONLY, ACTUAL DEFS IN PROKL
;THE FRONT END FUNCTION CODES
.DFLCI==1 ;LINE COUNT IS
.DFHSD==:3 ;HERE IS STRING DATA
.DFHLC==:4 ;HERE ARE LINE CHARACTERS
.DFRDS==:5 ;REQUEST DEVICE STATUS
.DFSDO==:6 ;SPECIAL DEVICE OPERATION
.DFLPC==1 ;LOAD PAGE COUNTER
.DFSTS==:7 ;HERE IS DEVICE STATUS
.DFESD==:10 ;ERROR ON DEVICE
.DFRTD==:11 ;REQUEST TIME OF DAY
.DFHTD==:12 ;HERE IS TIME OF DAY
.DFFDO==:13 ;FLUSH OUTPUT (SENT TO 11 ONLY)
.DFSTA==:14 ;SEND TO ALL (SENT TO 11 ONLY)
.DFLDU==:15 ;A LINE DIALED UP (FROM 11 ONLY)
.DFLHU==:16 ;A LINE HUNG UP OR LOGGED OUT
.DFLBE==:17 ;LINE BUFFER BECAME EMPTY
.DFXOF==:20 ;XOF COMMAND TO THE FE
.DFXON==:21 ;XON COMMAND TO THE FE
.DFSPD==:22 ;SET TTY LINE SPEED
.DFHLA==:23 ;HERE IS LINE ALLOCATION
.DFHRW==:24 ;HERE IS -11 RELOAD WORD
.DFACK==:25 ;GO ACK ALL DEVICES AND UNITS
.DFTOL==:26 ;TURN OFF/ON LINE
.DFTLO==:0 ;TURN IT OFF
.DFTOO==:1 ;TURN IT ON
.DFEDR==:27 ;ENABLE/DISABLE DATASETS
.DFLTR==:30 ;LOAD TRANSLATION RAM
.DFLVF==:31 ;LOAD VFU
.DFMSG==:32 ;SUPPRESS SYSTEM MESSAGES TO TTY
.DFKLS==:33 ;SEND KLINIK DATA TO THE -11
.DFXEN==:34 ;ENABLE XON (SENT TO 11 ONLY)
.DFBKW==:35 ;BREAK-THROUGH WRITE
.DFDBN==:36 ;DEBUG MODE ON
.DFDBF==:37 ;DEBUG MODE OFF
! ;[7.1223] End of COMMENT
RESCD
; CLEAR OUTPUT BUFFER ROUTINE
TTCOB4::STKVAR <TTCBSV>
MOVEM B,TTCBSV ;SAVE ADDRESS OF DYNAMIC DATA
DYNST ;GET LINE NUMBER
MOVE D,B ;GET COPY OF LINE NUMBER
MOVS C,B ;LINE NUMBER
MOVEI B,.FEDLS ;GET DEVICE CODE
MOVE A,MSTRDT ;MASTER DTE, NO POST
CALL FIXARG ;GET PROPER ARGS
EXCH D,TTCBSV ;GET BACK DYNAMIC DATA
TMNE TTOTP,(D) ;OUTPUT IN PROGRESS?
JRST [ EXCH D,TTCBSV ;YES. GET BACK ORIGINAL ARGUMENT
CALL DTEFLO ;YES, FLUSH DTE REQUESTS
JRST TTCBF5]
EXCH D,TTCBSV ;GET BACK ORIGINAL ARGUMENT
TTCBF5: MOVS D,C ;LINE NUMBER AS ARG
SETZ C,
HRLI B,.DFFDO ;FLUSH FUNCTION
CALL DTEQI ;QUEUE IT UP
MOVE B,TTCBSV ;GET BACK DYNAMIC DATA
RET
ENDSV. ;END STKVAR
SWAPCD
; SET TERMINAL SPEED
TTSSP2::TRVAR <LINENO>
MOVEM T2,LINENO ;SAVE LINE NUMBER
SKIPN FEFLG ;IN PRIMARY PROTOCOL?
RET ;NO. IGNORE IT THEN
ACVAR <W1,SSBFR>
UMOVE W1,2 ;GET FLAGS
MOVX D,SC%OPR!SC%WHL ;[7195]SEE IF PRIVILEGED
TDNN D,CAPENB ;[7195]PRIVILEGED?
TXNN W1,MO%RMT!MO%AUT ;[7195]NO, REMOTE OR AUTOBAUD?
SKIPA ;[7195]PRIV'D OR NOT SETTING REMOTE/AUTOBAUD
ITERR (CAPX1) ;[7195]NOT PRIV'D, USER CAN NOT DO THIS
NOINT ;PREVENT INTS
BLCAL. ASGRSB,<[4],[.RESP3],[RS%SE0!.RESTP]> ;GET A 4-WORD BLOCK
ITERR () ;SHOULDN'T HAPPEN
MOVEM A,SSBFR ;SAVE ADR OF BLOCK
MOVE C,A
HRLI C,(POINT 16,0) ;MAKE BYTE PTR
UMOVE D,C ;GET USER'S ARGS
HLRZ A,D ;GET INPUT SPEED
;THE LAW OF SPEED SETTING:
; (1) IF MO%AUT=0 AND A LINE IS NOT REMOTE NOR AUTOBAUD, THEN SET TTSPWD
; AND ALSO SET SAVED SPEED IF ANY. THE SAVED SPEED IS ACTUALLY ONLY
; USED WHEN THE LINE IS GOING MO%RMT.
; (2) IN THE OTHER CASES, IF MO%AUT=0 THEN SET TTSPWD ONLY IF THERE IS
; A DYNAMIC DATA BLOCK. THIS COVERS THE CASE OF PRESERVING LINE
; SPEED WHEN A LINE IS REMOTE ONLY AND LEAVING SPEED ALONE IF
; A LINE IS AUTOSPEED AND NO DYNAMIC DATA EXISTS. WE SET THE SPEED
; IN THE FRONT-END IN THE REMOTE CASE.
; (3) OTHER CASES ARE MO%AUT=1, SPEEDS ARE IGNORED IN THIS CASE.
TXNE W1,MO%AUT ;IS MO%AUT ZERO?
IFSKP.
TMNE TT%AUT+TT%FEM,TTSTAT(B) ;YES, IS LINE NOT REMOTE NOR AUTO?
IFSKP.
MOVEM D,TTSPWD(B) ;YES, SET SPEED
CALL STADYN ;(T2/T2) IS THERE DYNAMIC DATA?
ANSKP. ;IF NOT, PROCEED WITH SPEED SETTING
MOVEM D,TTSVPD(B) ;YES, SET SAVED SPEED
ENDIF.
;HERE FOR OTHER CASES WHERE MO%AUT=0
MOVE B,LINENO ;GET LINENO BACK
CALL STADY ;IS THERE DYNAMIC DATA
ANSKP. ;NO, DON'T CHANGE SPEED OF AUTOSPEED LINE
MOVE B,LINENO ;GET LINENO BACK
MOVEM D,TTSPWD(B) ;SET SPEED
ENDIF.
MOVE B,LINENO ;GET LINENO BACK
CALL TTEXFA ;SET XON/XOFF STATE
IDPB A,C ;STORE INPUT
IDPB D,C ;STORE OUTPUT SPEED
MOVEI D,0(D)
MOVEI A,1 ;ASSUME ONE STOP BIT
CAIG D,^D110 ;LESS THAN OR EQUAL TO 110 BAUD?
MOVEI A,2 ;YES. USE 2 STOP BITS THEN
TXNE W1,MO%RMT ;WANT REMOTE?
JRST [ TRO A,(1B2) ;[7195]SET HIGH ORDER BIT
SETONE TTFEM,(B) ;SAY IS REMOTE
JRST .+1] ;GO SET SPEED ANYWAY
TXNE W1,MO%AUT ;WANT "AUTO" SPEED?
JRST [ SETONE TTAUT,(B) ;[7195]SET INDICATOR
TRO A,(1B3) ;SET BIT IN MESSAGE TO FE
JRST TTSSP5] ;AND PROCEED
TTSSP5: IDPB A,C ;STORE THIS
MOVE C,SSBFR ;REFRESH PTR
HRLI C,(POINT 8,0)
MOVE F,SSBFR ;PASS BUFFER ADDRESS FOR INTERRUPT
BLCAL. TTDTEQ,<[SSPINT],[.DFSPD],[6],C>
OKINT ;ALLOW INTS AGAIN
RET ;AND DONE
ENDAV. ;END ACVAR
;HERE AT INTERRUPT LEVEL AFTER MSG SENT TO FE
; A/ UNIQUE CODE - ADR OF RESIDENT BFR
RESCD
SSPINT: CALL RELRES
RET
SWAPCD
; SET/RETURN DEVICE NON-TERMINAL STATUS
TTSNT1::SKIPN FEFLG ;IN PRIMARY PROTOCOL?
RET ;NO. IGNORE IT THEN
STOR C,TTNTS,(B) ;SAVE NEW VALUE
BLCAL. TTDTEQ,<[0],[.DFMSG],[0],C>
RET ;AND DONE
RESCD ;[7310] Make routine TTNTM1: resident
;TELL 20F TO ALLOW OR NOT ALLOW SENDALLS, BUT DON'T SAVE TTNTS
TTNTM1::SKIPN FEFLG ;IN PRIMARY PROTOCOL?
RET ;NO. IGNORE IT THEN
BLCAL. TTDTEQ,<[0],[.DFMSG],[0],C>
RET ;AND DONE
;ENABLE/DISABLE XOFF RECOGNITION IN THE FRONT-END
TTEXFA: SAVET ;SAVE REGISTERS
CALL STADYN
RET ;NOT IMPORTANT
JRST TTEXZ
TTEXF:: SKIPN FEFLG ;CHECK FOR PRIMARY PROTOCOL
RET ;NO. IGNORE IT THEN
SAVET ;SAVE TEMPS
TTEXZ: SETZ T4,0 ;ASSUME CLEAR
TMNE TT%PGM,TTFLGS(T2)
SETO T4,0 ;SET
DYNST ;GET STATIC TTY NUMBER
SKIPG TTACTL(T2) ;NORMALLY ACTIVE LINE?
SETZ T4, ;NO, DISABLE FE XOFF
BLCAL. TTDTEQ,<[0],[.DFXEN],[0],T4>
RET
SWAPCD
;TTMSG...
;CODE TO DO A SEND ALL FOR KL DTE20 CONFIGURATIONS
;TTMSSN FOR SINGLE LINE, TTMSAL FOR ALL LINES
; A/ BYTE PTR TO STRING
; B/ LINE NUMBER
; C/ COUNT OF BYTES IN STRING
TTMSAL::SASUBR <MSBP,MSLN,MSCT>
SKIPN FEFLG ;USING PRIMARY PROTOCOL?
JRST [ CAME B,CTYLNO ;CTY?
RET ;NO, FORGET IT
RETSKP] ;DO IT
SETOB B,MSLN ;NOTE ALL LINES
HRLI B,.DFSTA ;ASSUME SEND ALL
MOVSI A,DECSAL ;INTERRUPT LOCATION
HRR A,MSTRDT
HRRI B,.FEDLS ;THE LINE SCANNER
CALL FIXARG ;GO CHECK FOR CTY,ETC.
HRR C,MSCT ;THE COUNT
MOVE D,MSBP ;THE POINTER
TXO C,DTBYTM ;FORCE BYTE MODE SEND
AOS SALCNT ;INCREMENT SENDALL COUNT
CALL DTEQI ;GO SCHEDULE THE REQUEST
RETSKP
ENDSA.
;ROUTINE TO DO SENDALL FOR SINGLE LINE
; T2/ LINE NUMBER
; RETURN +1: DON'T DO THE LINE
; +2: OK TO DO, T2/ LINE NUMBER
TTMSSN::SKIPN FEFLG ;PRIMARY PROTOCOL?
CAMN T2,CTYLNO ;OR CTY?
RETSKP ;YES, OK TO DO
RET ;SKIP IT
RESCD
;TELL FE TO RESUME SENDING TO TERMINAL
TTXON1::SKIPN FEFLG ;IN PRIMARY PROTOCOL?
RET ;NO .SKIP THE MESSAGE THEN
JE TTXFF,(B),R ;IF NOT FORCING STATUS TO FE, RETURN
SETZRO TTXFF,(B) ;CLEAR THE BIT
MOVEI A,.DFXON ;FE XON FUNCTION
SAVEAC <B>
DYNST ;GET LINE NUMBER
CALLRET SNDFNC ;TELL FE TO RESTART
;FRONT END LINE. TELL FRONT END TO STOP SENDING TO TERMINAL
TTCHI3::SAVET ;SAVE TEMPS
JE TTXFF,(B),R ;IF NOT FORCING STATUS TO FE, RETURN
SETZRO TTXFF,(B) ;CLEAR THE BIT
DYNST ;GET STAT ADDRESS
MOVEI A,.DFXOF ;TELL FE TO STOP
CALLRET SNDFNC ;DO IT
;ROUTINE TO SEND XOFF OR XON TO THE FRONT END
;ACCEPTS: A/ FUNCTION TO SEND
; B/ LINE NUMBER
;RETURNS: +1 /COULD NOT SEND REQUEST
; +2/ REQUEST SENT
SNDFNC: SAVEAC <B>
MOVSI C,0(B) ;PUT LINE NUMBER IN CORRECT PLACE
MOVSI B,0(A) ;FUNCTION CODE
HRRI B,.FEDLS ;ASSUME DLS
CALL FIXARG ;GO FIX UP THE ARGS
HLRZ D,C ;LINE NUMBER AS DATUM
SETZM C ;DIRECT
MOVE A,MSTRDT ;TO THE MASTER -11
CALLRET DTEQI ;QUEUE TO DTE
;SEND XOFF TO DISCOURAGE FURTHER INPUT FROM TERMINAL
SNDXO2::CONSZ PI,1B<^D20+DLSCHN> ;AT DTE PI LEVEL?
JRST SNDXO1 ;YES. GO TO IT
NOSKD1 ;PREVENT SCHEDULER INTERRUPTS
CHNOFF DLSCHN ;AND DTE INTERRUPTS
SNDXO1: SAVET
SKIPG TTACTL(B) ;LINE ACTIVE?
JRST SNDXO3 ;NO, SEND NOTHING
JN TTFXO,(B),SNDXO3 ;DO NOTHING IF PREVIOUS XOFF SENT
SETONE TTFXO,(B) ;SAY X-ON NEEDED
MOVEI D,XOFFC ;THE CHARACTER
SKIPGE CHITAB(D) ;PARITY NEEDED?
TXO D,200 ;YES. APPLY IT
MOVE A,MSTRDT ;SEND TO THE MASTER
MOVSI C,0(B) ;LINE NUMBER
MOVE B,[.DFBKW,,.FEDLS]
CALL FIXARG ;FIX UP THE ARGS
CALL DTEQI ;GO SEND IT
SNDXO3: CONSZ PI,1B<^D20+DLSCHN> ;AT DTE PI LEVEL?
RET ;YES. ALL DONE THEN
CHNON DLSCHN ;RESTORE THE CHANNEL
OKSKD1 ;AND THE SCHEDULER
RET ;AND DONE
;SEND XON ONLY IF LINE IS MARKED AS NEEDING
;ONE, AND IT HAS NOT STORED TOO MANY CHARACTERS IN EITHER ITS
;INPUT BUFFER OR TTBBUF.
;
;Edit [7342] Notice:
; This routine no longer has the intelligence to do XON
; depending on certain conditions. It will ALWAYS send
; an XON and will only get called from TTYSRV if the line
; has almost no characters in the TTBBUF. This is to
; eliminate a race condition between TTCH7 and RSXSRV when
; a line is doing high speed input.
SNDXN2::JE TTFXO,(T2),R ;[7342] IF NOT WAITING, RETURN
JN TTSHU,(T2),R ;[7342] DO NOTHING IF LINE TURNED OFF
SAVET ;BE TRANSPARENT
SKIPG TTACTL(T2) ;[7342] Is this an active line?
RET ;[7342] No, then leave.
STKVAR <SNDXSV>
MOVEM T2,SNDXSV ;[7342] SAVE THE LINE NUMBER
CONSO PI,77000 ;SKIP NOSKED IF NOT AT PI LEVEL 7
NOSKD1 ;PREVENT SCHEDULER INTERRUPTION
CHNOFF DLSCHN ;AND DTE INTERRUPTS
MOVE T2,SNDXSV ;[7342] TURN IT ON IF NOT ACTIVE.
MOVE T1,MSTRDT ;[7342] TO THE MASTER
MOVEI T4,XONC ;[7342] THE CHARACTER
SKIPGE CHITAB(T4) ;[7342] PARITY NEEDED?
TXO T4,200 ;[7342] YES. APPLY IT
MOVSI T3,0(T2) ;[7342]
MOVE T2,[.DFBKW,,.FEDLS]
CALL FIXARG
CALL DTEQI ;GO SEND THE BYTE
MOVE T2,SNDXSV ;[7342] GET LINE NUMBER
SETZRO TTFXO,(T2) ;[7342] NO X-ON NEEDED NOW
MOVE T2,SNDXSV ;[7342] Restore line number
CHNON DLSCHN ;RESTORE DTE
CONSO PI,77000 ;SKIP OKSKED IF NOT AT PI LEVEL 7
OKSKD1 ;AND THE SHCEDULER
RET ;AND DONE
ENDSV. ;END STKVAR
; TTUHU and TTHU2: routines to hangup or unhangup lines
;
; Call: T2/ line number to hangup
; CALL TTHU2 or TTUHU
; Returns: +1 always
TTUHU:: SAVET ;[7435] Save the temps
MOVS T3,T2 ;[7435] Swap TTY to left half
MOVE T2,[.DFLDU,,.FEDLS] ;[7435] Load the unhangup function code
JRST TTHU21 ;[7435] Join code below
TTHU2:: SAVET ;[7435] Save the temps
MOVS T3,T2 ;[7435] Swap TTY number to left half
MOVE T2,[.DFLHU,,.FEDLS] ;[7435] Load function code to hang up
TTHU21: MOVE T1,MSTRDT ;[7435] Master -11
CALL FIXARG ;[7435] (T2,T3/T2,T3) Get proper device/line
HLRZ D,C
SETZ C,
CALL DTEQI ;REQUEST THE HANGUP
RET ;AND DONE
;CHECK INPUT RATE OF LINE
;LIMIT ITS STORAGE IN TTBBUF
BIGST2::LOAD C,TTFBB,(B) ;GET COUNT OF CHARACTERS IN TTBBUF
AOS C ;INCREASE IT
IFE NICSW,<
CAIL C,MAXABC ;BEYOND BAD GUY CUTOFF?
>;IFE NICSW
IFN NICSW,<
CAIL C,MAXABC+^D100 ;BEYOND BAD GUY CUTOFF?
>;IFN NICSW
JRST STPLNF ;STOP LINE
CAIG C,2 ;CHECK FOR 2 IN BUFFER
JRST BIGST4 ;NO NOT THIS TIME
SKIPG TTACTL(T2) ;YES CHECK TO SEE IF ACTIVE
JRST STPLNF ;NO SHUT LINE DOWN IT IS ANOYING ME
BIGST4: STOR C,TTFBB,(B) ;UPDATE COUNT OF CHARACTERS IN TTBBUF
CAIGE C,MAXBBC ;MANY CHARS FOR THIS LINE?
RETSKP ;NO, CONTINUE
MOVE C,TTBIGC ;YES, BIGBUF GETTING FULL TOO?
CAIL C,MAXABC-^D20
CALL SNDXO2 ;YES, SEND XOF
RETSKP
;TELL FE TO STOP ACCEPTING INPUT ON LINE, I.E. BY SETTING INPUT
;SPEED TO 0.
STPLNF: JN TTSHU,(B),R ;DO NOTHING IF LINE ALREADY OFF
SAVEAC <T2>
IFN STANSW,<
IFQE. TTWSO,(B) ;LINE HAS BEEN SHUT OFF BEFORE?
SETONE TTWSO,(B) ;NO, REPORT IT VIA BUGINF
BUG.(INF,TTYSTP,RSXSRV,HARD,<Line has been shut off because of excessive input rate>,<<T2,LINE>>,<
Cause: A terminal line on RSX20F is generating input at an excessive
rate. It is being shut off for 3 seconds by having its input
speed set to 0. This can result from a noisy line which has a high
input baud rate. If an EIA line, it may be too long and so picks
up electrical noise.
Action: This problem can be prevented by eliminating the noise or reducing
the input speed.
Data: LINE - Line being shut off
>,,<DB%NND>) ;[7.1210]
ENDIF.
SETONE TTSHU,(B) ;NOTE LINE SHUT OFF
MOVEI C,TTTOBL ;C/THE ROUTINE TO CALL
MOVEI A,^D5000 ;5 SECONDS
>;IFN STANSW
;;
;; note: above used to be IFE STANSW, below used to be IFN STANSW
;;
IFE STANSW,<
RS NOISEX,1 ;TOTAL NUMBER OF TTYSTP BUGINFS
NOISEL==20 ;MAX NUMBER OF NOISEY LINES RECORDED
RS NOISEY,NOISEL ;LINE NUMBER,,TTYSTP COUNT FOR THIS LINE
AOS NOISEX ;BUMP TOTAL TTYSTP COUNT
MOVSI A,-NOISEL ;AOBJN PTR TO SCAN TABLE
DO.
SKIPE C,NOISEY(A) ;IS THIS A FREE SLOT?
IFSKP.
HRLZM B,NOISEY(A) ;YES, ADD THIS LINE TO THE TABLE
AOS NOISEY(A) ;NUMBER OF TTYSTPS ON THIS LINE
ELSE. ;IF NOT ZERO
HLRZS C ;ISOLATE LINE NUMBER
CAIN C,(B) ;LINE ALREADY IN TABLE?
AOSA NOISEY(A) ;YES, BUMP TTYSTP COUNT
AOBJN A,TOP. ;NO, KEEP LOOKING
ENDIF.
ENDDO.
IFQE. TTWSO,(B) ;LINE HAS BEEN SHUT OFF BEFORE?
SETONE TTWSO,(B) ;NO, REPORT IT VIA BUGINF
BUG.(INF,TTYSTP,TTYSRV,HARD,<TTY line has been shut off>,<<T2,LINE>>)
ENDIF.
CAMN B,CTYLNO ;IS THIS THE CONSOLE?
RET ;YES, DON'T REALLY TURN IT OFF
SETONE TTSHU,(B) ;NOTE LINE SHUT OFF
MOVEI C,TTTOBL ;C/THE ROUTINE TO CALL
MOVX A,<^D5*^D60*^D1000> ;5 MINUTES
>;IFE STANSW (used to be IFN STANSW)
CALL TTQAD ;GO Q IT UP AND LOSE DATUM
MOVSI C,0(B) ;THE LINE
MOVE B,[.DFTOL,,.FEDLS]
MOVE A,MSTRDT ;TO THE MASTER
MOVEI D,.DFTLO ;TURN IT OFF
CALL FIXARG
CALL DTEQI ;OUTPUT IT
RET
;NOISY LINE CHECK IN TTCHI. CALLED WHEN CHARACTER TAKEN FROM BIGBUF
;FOR INACTIVE LINE THAT WILL ECHO BELL.
; T2/ LINE NUMBER
TTCHNL::JN TTSHU,(T2),R ;DONE IF LINE ALREADY SHUT OFF
LOAD T1,TTNOI,(T2) ;SEE IF NOISY LINE--NOISE CHARACTER COUNT
CAIL T1,3 ;ALREADY SAW 3?
RET ;YES, ENOUGH ALREADY.
ADDI T1,1 ;BUMP NOISE COUNT
STOR T1,TTNOI,(T2)
CAIE T1,1 ;FIRST ONE?
RET ;NO
MOVEI T1,^D1000 ;YES, QUEUE A CHECK FOR ONE SECOND
MOVEI T3,CKNOIS
CALL TTQAD
RET
;CHECK OF POSSIBLY NOISY LINE AFTER 1 SECOND
; T2/ LINE NUMBER
CKNOIS::LOAD T1,TTNOI,(T2) ;SEE HOW MANY IN LAST SECOND
CAILE T1,2 ;MORE THAN 2?
CALL STPLNF ;YES, SHUT OFF LINE
SETZRO TTNOI,(T2) ;CLEAR COUNT, START FRESH
RET
;THIS CODE IS USED TO START UP A LINE TRANSFER VIA THE DTE20.
TTFES1: CALL TTSND ;GET ONE OUTPUT CHAR
RET ;BUFFER EMPTY
SKIPE FEFLG ;USING PRIMARY PROTOCOL?
IFSKP.
CALL [SAVEAC <B> ;NO
DYNST ;GET LINE NUMBER
CALLRET DTECHO] ;OUTPUT VIA SECONDARY
RET
SETONE TTOTP,(B) ;INDICATE LINE IS ACTIVE
RET ;AND DONE
ENDIF.
MOVE D,A ;THE CHARACTER
SETONE TTOTP,(B) ;SAY LINE IS ACTIVE
INCR TTFCT,(B) ;INCREASE COUNT OF BYTES IN -11
AOS TOTFCT ;MAINTAIN TOTAL OF ALL LINES
PUSH P,B ;SAVE ADDRESS OF DYNAMIC DATA
DYNST ;GET LINE NUMBER
SETONE TTFPK,(B) ;SAY WAITING FOR TO -11 DONE
MOVSI C,0(B) ;LINE NUMBER
MOVE B,[.DFHLC,,.FEDLS] ;ARGS
CALL FIXARG ;GET PROPER ARGS
PUSH P,F
SETZ F, ;JUST IN CASE
CALL DTSNGL ;GO DO A SINGLE REQUEST
JRST [ POP P,F ;FAILED. RESTORE FLAGS
POP P,B ;RESTORE ADDRESS OF DYNAMIC DATA
DECR TTFCT,(B) ;DECREMENT BYTES IN -11
SOS TOTFCT
CALL BAKTTO ;BACKUP TTY OUTPUT
JRST INTRST] ;GO SCHEDULE RETRY
POP P,F ;RESTORE FLAGS
POP P,B ;ADDRESS OF DYNAMIC BLOCK
RET ;AND DONE
;TTTOBL - ROUTINE CALLED FROM SCHEDULER TO TURN ON LINE AGAIN
;ACCEPTS:
; T2/ INTERNAL LINE NUMBER
TTTOBL::JE TTSHU,(B),R ;IF ALREADY RESTARTED, DO NOTHING
SETZRO TTSHU,(B)
BLCAL. TTDTEQ,<[0],[.DFTOL],[0],[.DFTOO]>
;TURN ON LINE
CALLRET SNDXN2 ;ASSUME AN X-ON IS NEEDED
; ENABLE/DISABLE TTY'S
FEDABL::SETZ C,0 ;SET LINE # (ALL)
MOVE A,MSTRDT ;GET ID OF MASTER
MOVE B,[.DFEDR,,.FEDH1] ;ENABLE/DISABLE DATASETS
CALL DTEQI
RET
SUBTTL FRONT-END TERMINAL HANDLING
RESCD ;MUST BE RESIDENT
;THIS ROUTINE IS CALLED FROM THE DTE20 INTERRUPT ROUITNE TO COMPLETE
;A TTY OUTPUT REQUEST. INPUT IS:
; A/ UNIQUE CODE (SEE BELOW)
; B/UNIT NUMBER
; C/DEVICE CODE
;UNIQUE CODE IS
; (0,,COUNT)
;WHERE COUNT IS THE NUMBER OF CHARACTERS SENT TO THE 11 IN SOME CALL TO
; DTEQ THAT SPECIFIED TTYINT AS ITS RETURN ADDRESS
; IF COUNT IS 0, THIS WAS A SINGLE CHARACTER (DTSNGL WAS CALLED)
; AND BUFFER COUNTS HAVE ALREADY BEEN UPDATED
; IF COUNT IS NON-ZERO, THIS WAS MULTIPLE CHARACTERS, AND THE BUFFER
; COUNT MUST BE UPDATED
;AT THIS POINT, THE CHARACTERS HAVE BEEN SENT TO THE 11 BUT NOT ACKNOWLEDGED
TTYINT::EA.ENT
PUSH P,A ;SAVE UNIQUE CODE
MOVE A,C ;MOVE DEVICE TO A
CALL GETLIN ;GET PROPER CODE
JRST [ POP P,A ;RESTORE CODE
RET] ;AND GIVE UP
SETZRO TTFPK,(B) ;CLEAR WAITING FOR -11
POP P,A ;GET BACK UNIQUE CODE
CALL STADY ;GET ADDRESS OF DYNAMIC DATA
RET ;RETURN IF BECOMING ACTIVE OR INACTIVE
JUMPE A,TTYIN3 ;HAVE A COUNT?
;MULTIPLE CHARACTERS WERE SENT. UPDATE COUNT OF CHARACTERS IN OUTPUT
;BUFFER
MOVEI C,0(A) ;NUMBER OF CHARACTERS SENT
SUB C,TTOCT(B) ;COMPUTE NEW COUNT OF CHARACTERS IN BUFFER
SKIPG C ;IF COUNT WENT NEGATIVE, DON'T STORE IT
MOVNM C,TTOCT(B) ;STORE NEW COUNT
OPSTRM <ADDM A,>,TTFCT,(B) ;UPDATE FE CHAR COUNT
ADDM A,TOTFCT ;UPDATE TOTAL
CALL CHKWRN ;SEE IF FORK WAKEUP NEEDED
JRST TTYIN3 ;SEE IF MORE OUTPUT
;TTYINT..
;CALLED FROM SCHEDULER PERIODIC TASK PROCESSOR TO START OUTPUT FOR A LINE
; T2/ DYNAMIC PTR
; RETURN +1 ALWAYS
FESTRO::CHNOFF DLSCHN ;AVOID INTERRUPTS
SKIPE FEFLG ;PRIMARY PROTOCOL RUNNING?
IFSKP.
CALL TTFES1 ;NO, HANDLED BY 1-CHAR CASE
ELSE.
CALL TTYIN3 ;DO THE WORK
ENDIF.
CHNON DLSCHN
RETSKP ;NOTE NOTHING ELSE TO BE DONE
;CHARACTERS ARE IN OUTPUT BUFFER. CALL TTSND IF THERE IS ONLY ONE.
;OTHERWISE CALL DTEQ TO SEND THEM ALL
TTYIN3: STKVAR <TTYVR1,TTYVR2> ;GET SOME SAVE CELLS
CALL GETFMC ;GET LINE MAX ALLOCATION
LOAD D,TTFCT,(B) ;GET COUNT OF CHARS IN FE
CAML D,A ;ROOM FOR MORE?
JRST [ SETONE TTOTP,(B) ;SAY LINE IS WAITING FOR UNBLOCK
RET] ;AND GO DISMISS THIS INTERRUPT
JN <TTFLO,TTSAL,TTHPO,TTSFG,TTRXF>,(T2),[ ;ANY SPECIAL FLAGS?
CALLRET TTFES1] ;YES, HANDLED BY THE 1-CHAR CASE
SKIPN C,TTOCT(B) ;ANY OUTPUT CHARACTERS?
CALLRET TTFES1 ;NO
MOVE C,TTOOUT(B) ;GET POINTER
TDNN C,WRPMSK ;AT LAST WORD IN THIS BUFFER?
JRST [ LDB A,[POINT 6,C,5] ;LOOK AT P,S FIELD OF BYTE POINTER
CAIE A,73 ;POINTING TO LAST BYTE?
JRST .+1 ;NO.
HRRZ A,C ;YES. GET ADDRESS OF CURRENT WORD
HRR C,1-TTSIZ(A) ;POINT TO NEXT BUFFER IN CHAIN
JRST .+1]
MOVE A,TTOCT(B) ;GET OUTPUT COUNT
CALL CNTSET ;GO ADJUST COUNT
MOVEM C,TTYVR1 ;SAVE STARTING BYTE POINTER
CALL FNDEND ;GO GET CHARACTERS
MOVE D,TTYVR1 ;GET BACK ORIGINAL BYTE POINTER
TRNN A,777776 ;AT LEAST TWO?
CALLRET TTFES1 ;NO. GO DO SINGLE CHARACTER
SETONE TTOTP,(B) ;MAKE SURE THIS IS ON
MOVEM C,TTOOUT(B) ;NEW OUTPUT POINTER
SETZ F, ;OUTPUT BUFFER
HRR F,A ;GET COUNT OF BYTES FOUND
MOVSI A,TTYINT ;IT'S TTY
HRR A,MSTRDT ;TO THE MASTER
MOVEM B,TTYVR2 ;SAVE ADDRESS OF DYNAMIC DATA
DYNST ;GET LINE NUMBER
SETONE TTFPK,(B) ;WAITING FRO TO -11 DONE
MOVS C,B ;LINE NUMBER
HRR C,F ;COUNT
MOVE B,[.DFHSD,,.FEDLS] ;STRING DATA
CALL FIXARG ;FIX UP THE ARGS
CALL DTEQBP
CALL DTEQ ;QUEUE THE REQUEST
JRST RSCHED ;GO DO RESCHEDULE
RET ;GO DISMISS THE INTERRUPT
;DTEQ FAILED. RESTORE COUNTS AND ARRANGE FOR SCHEDULER TO RESTART OUTPUT
RSCHED: MOVE B,TTYVR2 ;ADDRSS OF DYNAMIC DATA
MOVE D,TTYVR1 ;GET ORIGINAL BYTE POINTER
MOVEM D,TTOOUT(B) ;RESTORE OUTPUT BYTE POINTER
INTRST: DYNST ;B/ LINE NUMBER
SETZRO <TTOTP,TTFPK>,(B) ;NOT WAITING FOR PACKET
MOVEI A,^D100 ;TRY AGAIN IN 100 MS.
MOVEI C,TTSN10 ;START UP AS SINGLE CHARACTER
CALLRET TTQAD ;GO DO IT
ENDSV. ;END STKVAR
;CNTSET - ROUTINE TO FIGURE OUT MAX COUNT ALLOWED IN STRING DATA FUNCTION
;INPUT: A/ TTY BUFFER COUNT
; B/ ADDRESS OF DYNAMIC DATA
;RETURNS +1 ALWAYS WITH: A/-MAX COUNT,,0
CNTSET: SASUBR <CA,CB>
CALL GETFMC ;GET MAX ALLOC FOR THIS LINE
LOAD D,TTFCT,(B) ;CURRENT FRONT END COUNT
SUB A,D ;COUNT ALLOWED TO SEND
CAMLE A,CA ;CAN DO ALL?
MOVE A,CA ;YES
MOVN A,A ;FOR AOBJN
HRLZM A,CA ;TO LH AND RETURN IT
RET ;AND DONE
;GET MAX FE ALLOC FOR LINE. DEPENDS ON SPEED OF LINE
; B/ DYN PTR
; RETURNS +1 ALWAYS,
; A/ MAX BYTE COUNT
GETFMC: SAVEAC <C>
LOAD A,TTFMC,(B) ;GET NOMINAL MAX
STALOD C,TTOSP,(B) ;GET LINE SPEED
CAIE C,-1 ;UNKNOWN?
CAIGE C,^D1200 ;OR LESS THAN 1200?
JRST [ ASH A,-2 ;YES, 1/4 ALLOC
RET]
CAIL C,^D9600 ;FAST?
IMULI A,2 ;YES, DOUBLE ALLOC
RET ;OTHERWISE, NORMAL ALLOC
;FNDEND - FIND END OF MESSAGE TO SEND TO TERMINAL
;ACCEPTS:
; T1/ AOBJN POINTER TO STEP THROUGH OUTPUT BUFFER
; T3/ POINTER FOR REMOVING CHARACTERS FROM OUTPUT BUFFER
; CALL FNDEND
;RETURNS +1: ALWAYS,
; T1/ UPDATED AOBJN PTR, RH CONTAINS NUMBER CHARS TO DO
; T3/ UPDATED POINTER TO OUTPUT BUFFER
FNDEND: TDNN C,WRPMSK ;TO THE NEXT?
JRST [ LDB D,[POINT 6,C,5]
CAIN D,73
RET
JRST .+1]
ILDB D,C ;GET NEXT BYTE
TRNE D,TTOESC ;ESCAPE CHARACTER?
JRST [ MOVNI D,1
ADJBP D,C
MOVEM D,C
RET]
; JRST [ ADD C,[^D9B5] ;DECREMENT BYTE POINTER
; TLNE C,(40B5) ;WENT INTO PREVIOUS WORD?
; SUB C,[44B5+1] ;YES. CORRECT IT
; RET] ;AND RETURN
AOBJN A,FNDEND ;NO. GET MORE
RET ;ALL EXHAUSTED
;ROUTINE TO SET SPEED OF LINE FROM VALUES SENT BY -11
;ACCEPTS:
; A/ DEVICE CODE
; B/ UNIT NUMBER
; C/ REMOTE INDICATOR
; D/ INPUT,,OUTPUT
TTSPST::EA.ENT
CALL GETLIN ;GET INTERNAL LINE NUMBER
RET ;INVALID
TRNN C,(1B2) ;IS IT REMOTE?
JRST TTSPS0 ;NO, CHECK AUTO
SETONE TTFEM,(B) ;YES, INDICATE REMOTE
TTSPS0: TRNN C,(1B3) ;IS IT AUTO?
JRST TTSPS1 ;NO.
SETONE TTAUT,(B) ;YES. SET INDICATOR
TTSPS1: MOVEM D,TTSPWD(B) ;STORE IT
RET ;AND DONE
;ROUTINE TO HANDLE SIGNAL FROM A FE THAT ITS LINE BUFFER FOR
;A GIVEN LINE IS EMPTY. ACCEPTS:
; A/ DEVICE CODE
; B/LINE NUMBER
TTYDON::EA.ENT
JUMPL B,DONALL ;IF NEG HE WANTS TO ACK THEM ALL
CALL GETLIN
RET ;ILLEGAL LINE
JN TTFPK,(B),R ;IF TO -11 DONE PENDING, GO AWAY
CALL STADY ;GET ADDRESS OF DYNAMIC DATA
RET ;GONE
LOAD C,TTFCT,(B) ;GET COUNT OUTSTANDING
MOVN C,C
ADDM C,TOTFCT ;REDUCE FE TOTAL
SETZRO TTFCT,(B) ;CLEAR COUNT OF BYTES IN -11
JE TTOTP,(B),R ;IS THIS LINE WAITING FOR THIS INT?
CALLRET TTYIN3 ;YES, CONTINUE OUTPUT TO THE LINE
;HERE WHEN FRONT END IS ACKING ALL UNITS
DONALL: STKVAR <SAVEE>
MOVSI C,NTTFE ;NUMBER OF FRONT END LINES
MOVNS C ;MAKE AOBJN POINTER
DONAL1: MOVEM C,SAVEE ;SAVE AOBJN POINTER
MOVEI B,0(C) ;B/LINE NUMBER
MOVEI A,.FEDLS ;ALL LINES ARE DLS
CALL TTYDON ;GO ACK THIS GUY
MOVE C,SAVEE
AOBJN C,DONAL1 ;DO ALL LINES
MOVE B,CTYLNO ;GET CTY LINE NUMBER
LOAD C,TTSTY,(B) ;GET LINE TYPE
CAIE C,TT.FE ;FRONT END LINE?
RET ;NO. DON'T ACK IT
SKIPGE B,CTYUNT ;B/UNIT NUMBER FOR CTY
RET ;NOT SET UP YET
MOVEI A,.FEDLS ;A/ DEVICE .FEDLS
CALLRET TTYDON ;GO ACK THE LINE
ENDSV. ;END STKVAR
;ROUTINE TO HANDLE A DIAL UP SIGNAL FROM THE FE
; A/DEVICE CODE
; B/LINE NUMBER
TTYDLU::EA.ENT
CALL GETLIN ;GET PROPER LINE NUMBER
RET ;ILLEGAL LINE
MOVSI A,0(B) ;LINE NUMBER TO LH
HRRI A,DLSCXF+CARONB ;INDICATE CARRIER ON
CALLRET BIGSTO ;PUT IT IN BUFFER
;ROUTINE TO HANDLE HANG UP SIGNAL FROM FE
; A/DEVICE CODE
; B/LINE NUMBER
TTYHGU::EA.ENT
CALL GETLIN ;GET LINE NUMBER
RET ;ILLEAGAL LINE
MOVSI A,0(B) ;TO LH
HRRI A,DLSCXF ;CARRIER TRANSITION
CALLRET BIGSTO ;STORE IT
;DEFINE THE PROTOCOL TRANSFER VECTOR
TTYDTV::0 ;NO STRING DATA
TTYDON ;ACK
0 ;NO STATUS
TTYSLA ;SET LINE ALLOCATION
R ;NO ERROR REPORTING
TTDTRM ;DETACH REMOTES ON RELOAD
;THIS ROUTINE IS CALLED FROM THE DTE INTERRUPT ROUTINE TO SET
;THE LINE ALLOCATION FOR A TTY LINE. ACCEPTS:
; 1/ DEVICE CODE
; 2/ ALLOCATION
; 3/ LINE NUMBER
TTYSLA::EA.ENT
EXCH B,C ;GET ARGS IN PROPER PLACES
CALL GETLIN ;GET INTERNAL LINE NUMBER
RET ;ILLEGAL LINE
STOR C,TSFMC,(B) ;STORE NEW ALLOCATION
RET ;AND DONE
;IDCTY - IDENTIFY THE CTY
;ACCEPTS:
; T2/ UNIT NUMBER FOR THE CTY AS KNOWN BY THE FRONT END
; CALL IDCTY
;RETURNS +1: ALWAYS
;CALLED FROM DTE SERVICE WHEN THE FRONT END SENDS OVER THE UNIT NUMBER
;WITHIN THE .FEDLS DEVICE THAT IT KNOWS AS THE CTY. STORES:
;CTYUNT/ THE UNIT NUMBER
;CTYINT/ THE INTERNAL EQUIVALENT OF THAT (INTERNAL LINE NUMBER)
;THE CTY SHOULD ALWAYS BE ADDRESSED INTERNALLY BY CTYLNO, WHICH IS
;SET UP BY TTINIT. CTYINT WILL CONTAIN THE INTERNAL
;EQUIVALENT OF THE LINE ON WHICH THE CTY IS PHYSICALLY LOCATED FOR THIS
;MONITOR LOAD. ADDRESSING THE LINE BY THIS NUMBER IS AN ERROR.
;IF CTYINT=CTYLNO, CTYINT IS SET TO -1 SO THAT NO LINE NUMBER WILL
;EVER MATCH IT
IDCTY:: EA.ENT
SAVET
PUSH P,T2 ;SAVE UNIT NUMBER
SETOM CTYUNT ;INDICATE CTY NOT KNOWN FOR GETLIN
MOVEI T1,.FEDLS ;T1/DEVICE
CALL GETLIN ;GET THE INTERNAL EQUIVALENT
RET ;NOT A FRONT END LINE
CAME T2,CTYLNO ;IS THIS ITS VALID INTERNAL LINE NUMBER?
MOVEM T2,CTYINT ;NO. SAVE THIS AS ITS ALIAS
POP P,CTYUNT ;SET UNIT NUMBER FOR CTY
RET
;GETLIN - ROUTINE TO CONVERT DEVICE/LINE TO INTERNAL LINE NUMBER
;ACCEPTS:
; A/DEVICE CODE (ONLY .FECTY OR .FEDLS)
; B/LINE NUMBER
;RETURNS +1: FAILURE
; +2: SUCCESS,
; T2/INTERNAL LINE NUMBER
;DOES NOT CLOBBER ANY REGISTERS EXCEPT B
GETLIN: CAIN A,.FECTY ;THE CTY?
JRST [ MOVE B,CTYLNO ;YES. USE INTERNAL NUMBER OF CTY
RETSKP] ;AND RETURN WITH GOOD LINE
;THE DEVICE MUST BE .FEDLS
CAMN B,CTYUNT ;THE UNIT NUMBER FOR THE CTY?
JRST [ MOVE B,CTYLNO ;YES. GET INTERNAL LINE NUMBER FOR CTY
RETSKP]
CAIL B,NTTFE ;IS THE UNIT NUMBER WITHIN THE NUMBER
; OF FRONT END LINES THAT WE KNOW ABOUT?
RET ;NO. CAN'T BE A FRONT END LINE
JUMPE B,GETLN1 ;IF THE DL11, SKIP BIAS
SUBI B,SPCLIN ;BIAS THE LINE
SKIPG B ;NOW A GOOD T/S LINE NUMBER?
ADDI B,NTTFE-1 ;NO. WAS A SPECIAL. TRANSLATE THE LINE #
GETLN1: ADD B,TT1LIN+TT.FE ;YES. ADD NUMBER OF FIRST F.E. LINE
RETSKP ;RETURN SUCCESS
;FIXARG - ROUTINE TO DETERMINE PROPER DEVICE/LINE NUMBER FOR LINE ON RSX20F
;FRONT END
;ACCEPTS: RH B/ DEVICE (ONLY .FEDLS)
; LH C/ INTERNAL LINE NUMBER
; CALL FIXARG
;RETURNS +1: ALWAYS,
; RH B/ DEVICE AS KNOWN BY THE FRONT END
; LH C/ UNIT AS KNOWN BY FRONT END
;CALLED IN PREPARATION FOR CALLING DTE SERVICE. LINE IS ASSUMED TO
;BE ON THE FRONT END
;NOTE: IF CALLED WITH -1, RETURNS IMMEDIATELY. THIS IS BECAUSE OF A
;FRONT-END BUG THAT REQUIRES RECEIVING -1 ON A SENDALL
FIXARG: ACVAR <W1> ;GET SOME WORK REGISTERS
JUMPL C,R ;IF UNIT .LE. 0, NO CHANGE
HLRZ W1,C ;GET INTERNAL LINE NUMBER
CAMN W1,CTYLNO ;THE CTY?
JRST [ HRRI B,.FECTY ;YES. USE THE CTY
HRLI C,0 ;AND UNIT 0
RET]
SUB W1,TT1LIN+TT.FE ;GET LINE NUMBER WITHIN TYPE
JUMPE W1,FIXAR1 ;IF THE DL11, ALL DONE
ADDI W1,SPCLIN ;NOT. BIAS THE LINE NUMBER
CAILE W1,NTTFE-1 ;A VALID T/S LINE?
SUBI W1,NTTFE-1 ;NO. ONE OF THE SPECIALS THEN
FIXAR1: HRL C,W1 ;RETURN IT IN LH OF C
RET ;AND DONE
ENDAV. ;END ACVAR
;LOCAL ROUTINE TO SIMPLIFY CALLS TO DTEQ - USES "BLISS" CALLING SEQUENCE
; T2/ LINE NUMBER
; CALL <AA,AB,AC,AD>
; WHERE: (SEE DTESRV FOR FURTHER DETAILS)
; AA - DRIVER INT LOC (ASSUME MASTER DTE)
; AB - DTE FUNCTION (ASSUME .FEDLS)
; AC - 0 ,, BYTE CNT (LH FILLED IN WITH LINE NUMBER)
; AD - DATUM
;RETURN +1: ALWAYS
; ALL ACS PRESERVED
TTDTEQ: BLSUB. <AA,AB,AC,AD>
SAVET
HRLZ C,B
HRLZ B,AB
HRRI B,.FEDLS
CALL FIXARG ;CONVERT LINE NUMBER
HRLZ A,AA
HRR A,MSTRDT
HRR C,AC
MOVE D,AD
CALLRET DTEQI ;USE NON-SKIP VERSION OF DTEQ
ENDBS.
;Convert byte pointer before calling DTEQ.
; CALL DTEQBP
;ACCEPTS USUAL ARGUMENTS FOR DTEQ, WITH BYTE POINTER IN T4
;RETURNS +1: ALWAYS
; T4/ CONVERTED BYTE POINTER
;ASSUMES BYTE POINTER IS ONE-WORD GLOBAL TO SECTION 0, WITH 9-BIT BYTE SIZE
DTEQBP: ACVAR <W1>
LDB W1,[POINT 6,T4,5] ;GET P,S FIELD
SUBI W1,67 ;NORMALIZE TO LOWEST VALUE
CAILE W1,4 ;CAN'T BE MORE THAN 4
MOVEI W1,4 ;SO FORCE IT
HRL T4,OWG9(W1) ;MAKE A ONE-WORD LOCAL OUT OF IT
RET
ENDAV. ;END ACVAR
RSI OWG9,<441100,331100,221100,111100,001100>
;DTESTO - ROUTINE TO STORE A CHARACTER IN TTBBUF. CALLED AT INTERRUPT LEVEL
;FROM DTE SERVICE. DATA IS ALWAYS A CHARACTER AT THIS POINT.
;ACCEPTS:
; T1/CHARACTER IN 8 BITS
; T2/(0,, PHYSICAL LINE NUMBER)
; T3/DEVICE TYPE
;RETURNS +1: ALWAYS
DTESTO::EA.ENT
EXCH C,A ;TYPE TO A, CHAR TO C
CALL GETLIN ;GET INTERNAL LINE NUMBER FOR THIS LINE
RET ;LINE NOT ON FRONT END
MOVE A,C ;RESTORE CHARACTER
CALLRET TTIDON ;GO STORE CHARACTER
;DEVICE DEPENDENT CODE FOR SOBE
;SKIP IF FE BUFFER NOT EMPTY
TTSBEF::JN TTFCT,(T2),RSKP ;LOCAL RETURN SKIP IF NON-EMPTY
RET ;EMPTY
;DEVICE DEPENDENT CODE FOR INIALIZING DYNAMIC STORAGE
TTSETF::LOAD T3,TSFMC,(T2) ;GET FRONT END CHARACTER LIMIT FROM DYNAMIC
STOR T3,TTFMC,(T1) ; AND COPY TO DYNAMIC
CAIN T4,MSGLEN ;IS THIS A MESSAGE-LENGTH BLOCK?
RET ;YES. NO MORE INITIALIZATION
MOVE T3,TTSPWD(T2) ;GET SPEED WORD
MOVEM T3,TTSVPD(T1) ;SAVE IN SAVED SPEED WORD
RET
;ROUTINE CALLED FROM PROTOCOL HANDLER TO DETACH ALL REMOTE JOBS FOR
;A GIVEN DTE. ACCEPTS:
; A/ DTE NUMBER (NOT USED)
;RETURNS +1 ALWAYS
SWAPCD ;IS SWAPPABLE
TTDTRM: EA.ENT
CAME A,MSTRDT ;IS THIS FOR THE MASTER DTE?
RET ;NO. DON'T DO ANYTHING THEN
SAVET ;SAVE ALL TEMP REGISTERS
MOVSI B,NTTFE ;NUMBER OF FE LINES
MOVNS B ;SET UP AOBJN POINTER
HRR B,TT1LIN+TT.FE ;START WITH FIRST LINE AND LOOP THROUGH ALL
TTDTR1: TMNE TTFEM,(B) ;IS THIS LINE REMOTE?
CALL TTJBDT ;YES. DETACH IT THEN
AOBJN B,TTDTR1 ; DO ALL LINES
MOVEI A,.SFRMT ;SEE IF REMOTE LOGINS NOW ALLOWED
TMON ;GET VALUE
XCT [ CALL DTRMDS ;NOW DISALLOWED
CALL DTRMEN](B) ;NOW ALLOWED
RET ;AND DONE
;ROUTINE TO DEFINE THE DL11W PSEUDO-CTY'S.
;PRIMARY PROTOCOL MUST BE RUNNING
DFNDL1::EA.ENT
ACVAR <W1> ;GET A WORK REG
STKVAR <<DFNDLS,2>,<DFNDS1,1>> ;A STRING
MOVE T2,[ASCII /TTY/] ;GET BASE STRING
MOVEM T2,DFNDLS ;SAVE IT
MOVE T2,[ASCIZ /DL0/] ;GET DEFINITION STRING
MOVEM T2,DFNDS1 ;SAVE IT
MOVE W1,[-<SPCLIN-1>,,SPCLIN-2] ;THE LINES TO DO
DFNDLL: HRRZ T2,W1 ;GET LINE NUMBER
MOVEI T1,.FEDLS ;FOR THE DLS DEVICE
CALL GETLIN ;GET ITS INTERNAL NUMBER
JRST DFNDLE ;?
SETONE TTIGI,(T2) ;SET IGNORE
MOVEI T1,DFNDLS ;GET ADDRESS OF BYTE ARRAY
HRLI T1,(<POINT 7,0,20>) ;MAKE IT A STRING POINTER
MOVEI T3,10 ;GET AN OCTAL NUMBER
NOUT ;PUT LINE NUMBER IN STRING
JFCL
MOVEI T3,":" ;GET TERMINATOR
IDPB T3,T1 ;STORE COLON
SETZM T3 ;GET A NULL
IDPB T3,T1 ;TIE OFF STRING
MOVX T1,<BYTE (7)0,0,1>
ADDM T1,DFNDS1 ;CHANGE LOGICAL NAME STRING
MOVEI T1,.TTDES(T2) ;GET DEVICE DESIGNATOR IN T1
MOVEI T2,.MOSNT ;SET NON-TERMINAL STATUS
MOVEI T3,.MOSMN ;SUPPRESS SYSTEM MESSAGES
MTOPR ;DO IT
ERJMP .+1 ;PROCEED IF IT FAILS
MOVX T1,.CLNSY ;CREATE SYSTEM LOGICAL NAME
HRROI T2,DFNDS1 ;THE LOGICAL NAME
HRROI T3,DFNDLS ;THE DEFINITION
CRLNM ;DO IT
DFNDLE: BUG.(INF,DLDEF,RSXSRV,HARD,<Logical name define failed for FE CTY>,,<
Cause: A CRLNM was performed to define the logical names for the FE but it
failed.
Action: If this BUG persists, make it dumpable and submit an SPR with the
dump and a copy of MONITR.EXE. If possible, include any known
method for reproducing the problem and/or the state of the system
at the time the BUG was observed.
>)
AOBJN W1,DFNDLL ;DO THEM ALL
RET ;AND DOND
ENDSV. ;END STKVAR
ENDAV. ;END ACVAR
TNXEND
END