Trailing-Edge
-
PDP-10 Archives
-
SRI_NIC_PERM_SRC_3_19910112
-
monitor/tcptcp.mac
There are 9 other files named tcptcp.mac in the archive. Click here to see a list.
;[SRI-NIC]SRC:<6-1-MONITOR>TCPTCP.MAC.6, 19-Nov-87 04:28:28, Edit by MKL
; in TCPXXO, make sure option length isn't too bogus
;[SRI-NIC]SRC:<6-1-MONITOR>TCPTCP.MAC.4, 19-Nov-87 03:41:24, Edit by MKL
; at INPRO2, flush packets if headers don't fit
;[SRI-NIC]SRC:<6-1-MONITOR>TCPTCP.MAC.3, 22-Feb-87 22:18:34, Edit by MKL
; fix a bug in SNDMSL
;[SRI-NIC]XS:<NEWMON>TCPTCP.MAC.2, 8-Dec-86 13:16:19, Edit by MKL
; add fix at PKTIZ7 from Sweer@Sumex.
;SRC:<6.1.MONITOR.STANFORD>TCPTCP.MAC.47, 5-Nov-86 13:26:51, Edit by BILLW
; Send a Maximum Segment Length Option in SYN packets...
; Try to avoid one-way gateway problems by aborting SYN.SYN connections
; on first retransmission if they contain a funny host status.
;PS:<6-1-MONITOR>TCPTCP.MAC.46, 31-Mar-86 15:56:12, Edit by BILLW
; CLYNN (Via KLH) fix for receiving duplicate data.
;PS:<6-1-MONITOR>TCPTCP.MAC.43, 25-Mar-86 00:42:41, Edit by BILLW
; advertize optimistic windows based on number of interupt level
; buffer that are available at NUWNDO.
;PS:<6-1-MONITOR>TCPTCP.MAC.42, 11-Mar-86 17:34:56, Edit by BILLW
;in PKTIZE, recognize TSTVO as meaning a data packet should be sent
;PS:<6-1-MONITOR>TCPTCP.MAC.41, 10-Mar-86 00:46:02, Edit by BILLW
;rewrite CHKADD. now TCBs are hashed on LP/FH/FP, if possible.
;PS:<6-1-MONITOR>TCPTCP.MAC.32, 19-Feb-86 01:12:57, Edit by BILLW
;undo FP hashing. Never call TRMPKT - it fragments Free space horribly
;PS:<6-1-MONITOR>TCPTCP.MAC.28, 13-Feb-86 17:17:59, Edit by BILLW
; include Foriegn port in TCB hash table key.
; at PRCAC4-1, change PZ signaling (Hedrick's hung connection fix).
;PS:<6-1-MONITOR>TCPTCP.MAC.27, 13-Feb-86 01:19:28, Edit by BILLW
; redo time-out avoidance on closed window by updating PDCT
;PS:<6-1-MONITOR>TCPTCP.MAC.25, 11-Feb-86 16:23:38, Edit by BILLW
; Create RSIGNAL, and use it at REMSEx for requeing Rxmiter
;PS:<6-1-MONITOR>TCPTCP.MAC.24, 4-Feb-86 23:30:59, Edit by BILLW
; make a stab at correcting fencepst error at PRCAC4+n
;PS:<6-1-MONITOR>TCPTCP.MAC.23, 4-Feb-86 18:27:58, Edit by BILLW
; add other stuff from <6-1-exp-mon>: interval rounding at SIGNAL,
; TIMCALs for TCP processes, TSKAGN counter.
;PS:<6-1-MONITOR>TCPTCP.MAC.22, 4-Feb-86 02:25:31, Edit by BILLW
; A lot of things cause RX to be run, besides RX and PZ. Have these
; NOT signal RX if the send window is 0. Some of them probably need
; to not signal RX under other circumstances too. (REMSE7, PRCAC4)
;PS:<6-1-MONITOR>TCPTCP.MAC.21, 3-Feb-86 17:56:03, Edit by BILLW
; Modify XFRDAT, PRCDAT, SNDDA1, USRBFF, USRBFE so that they understand
; TCPJFN buffers are in monitor space, and dont thrash the pager.
;PS:<6-1-MONITOR>TCPTCP.MAC.20, 30-Jan-86 02:22:17, Edit by BILLW
; When calling TVTCSO from BG, set T2 to -1 (means scan ALL TVTs)
;PS:<6-1-MONITOR>TCPTCP.MAC.19, 18-Dec-85 15:14:59, Edit by BILLW
; Dont timeout connections waiting for a 0 window to open. (REXM11)
; respond to ACKs beyond the window with an ACK of out own. (PRCAX1)
;PS:<6-1-MONITOR>TCPTCP.MAC.18, 5-Dec-85 19:35:07, Edit by BILLW
; change ack strategy in NUWNDO. FRCPKT if both window (after
; SWS avoidance) AND the ACK point change (as per RFC813)
;PS:<6-1-MONITOR>TCPTCP.MAC.17, 29-Nov-85 18:57:38, Edit by BILLW
; Scan TVTs BEFORE running Packetizer (at TCPPRC)
;PS:<6-1-MONITOR>TCPTCP.MAC.16, 7-Nov-85 04:54:15, Edit by BILLW
; Count rxmitted packets per TCB. See also ANAUNV
;PS:<6-1-MONITOR>TCPTCP.MAC.15, 7-Nov-85 00:04:37, Edit by BILLW
; remove the UNRINT bugchk, but leave the test/replacement.
;PS:<6-1-MONITOR>TCPTCP.MAC.14, 25-Oct-85 02:39:40, Edit by BILLW
; expand TSOPS idea into "interactiveness" concept. A connection
; is maximally intervactive if a packet is sent every time a packet
; is received, and minimally interactive if it never sends any packets.
; In the first case, you want to wait a bit to try to piggyback acks
; on the outgoing data, but in the second case this introduces delays,
; and you want to send acks immediately. Inverse "interactiveness"
; can be approximated by counting the number of packets received
; between each one sent. If greater than N, send ACKs immediately.
;PS:<6-1-MONITOR>TCPTCP.MAC.13, 24-Oct-85 02:23:49, Edit by BILLW
; If we haven't sent any data packets on connection, dont delay acks
; Update Max and Min RTT (TMXRT, TMNRT)) regardless of interval algorithm
; being used. (requires ANAUNV change to make TMNRT and TSMRT seperate!)
; make bugchk use a number (80 ms) rather than TCPRXN.
; undo Alan's patch to set SMRT to minimum RTT
;PS:<6-1-MONITOR>TCPTCP.MAC.12, 22-Oct-85 16:42:04, Edit by BILLW
; add BUGCHK if retransmitter is run more often than TCPRXN
; update TRXI (in TCB) with new-style calculated retransmit interval
;<6-1-MONITOR.FT6>TCPTCP.MAC.5, 27-Aug-85 10:44:36, Edit by WHP4
;Stanford changes
; BUFHNT - make BFR an extended address
; Alan Larson's TCP retransmission performance fix at REMSE5+1
; Fix TOWNR to use global job numbers
; Fix lockup of large data transfers due to silly window silliness
; Fix lossage in BUFHNT
;
; UPD ID= 2197, SNARK:<6.1.MONITOR>TCPTCP.MAC.10, 5-Jun-85 11:21:13 by MCCOLLUM
;TCO 6.1.1406 - Update copyright notice.
; UPD ID= 1704, SNARK:<6.1.MONITOR>TCPTCP.MAC.9, 31-Mar-85 13:10:40 by PAETZOLD
;More TCO 6.1.1300 - typeo in last.
; UPD ID= 1703, SNARK:<6.1.MONITOR>TCPTCP.MAC.8, 31-Mar-85 13:08:16 by PAETZOLD
;TCO 6.1.1300 - Check for null buffer in BUFHNT.
; UPD ID= 1602, SNARK:<6.1.MONITOR>TCPTCP.MAC.7, 7-Mar-85 16:47:37 by PAETZOLD
;Document BUGxxx's
; UPD ID= 1568, SNARK:<6.1.MONITOR>TCPTCP.MAC.6, 26-Feb-85 17:16:59 by PAETZOLD
;Document BUGxxx's
; UPD ID= 1043, SNARK:<6.1.MONITOR>TCPTCP.MAC.5, 12-Nov-84 15:27:07 by PAETZOLD
;TCO 6.1041 - Move ARPANET to XCDSEC
; UPD ID= 291, SNARK:<TCPIP.5.4.MONITOR>TCPTCP.MAC.4, 24-Sep-84 13:56:00 by PURRETTA
;Update copyright notice.
; UPD ID= 238, SNARK:<TCPIP.5.4.MONITOR>TCPTCP.MAC.3, 21-Aug-84 10:29:34 by PAETZOLD
;TCO 6.2185 - Flush hung TCBs.
; UPD ID= 96, SNARK:<TCPIP.5.4.MONITOR>TCPTCP.MAC.2, 12-May-84 10:51:52 by PAETZOLD
;Move CLRBLK to IPFREE
; UPD ID= 4037, SNARK:<6.MONITOR>TCPTCP.MAC.11, 1-Apr-84 18:56:43 by PAETZOLD
;More TCO 6.1733 - Fix MAX packet size calculation
; UPD ID= 4036, SNARK:<6.MONITOR>TCPTCP.MAC.10, 1-Apr-84 18:44:21 by PAETZOLD
;More TCO 6.1733 - Change USRBFFs in FLSSBX to USRBFEs.
; UPD ID= 4025, SNARK:<6.MONITOR>TCPTCP.MAC.9, 31-Mar-84 16:21:45 by PAETZOLD
;TCO 6.2019 - Use ADJSPs
; UPD ID= 3944, SNARK:<6.MONITOR>TCPTCP.MAC.8, 19-Mar-84 10:23:58 by PAETZOLD
;More TCO 6.1733 - Fix typo in NUWND0.
; UPD ID= 3928, SNARK:<6.MONITOR>TCPTCP.MAC.7, 14-Mar-84 14:54:44 by PAETZOLD
;More TCO 6.1733 - Make initial buffer size selection more reasonable.
; UPD ID= 3891, SNARK:<6.MONITOR>TCPTCP.MAC.6, 11-Mar-84 10:35:31 by PAETZOLD
;More TCO 6.1733 - Fix for exceeding the send window. Fix for runaway
;ACK bug. Fix TCB's hung in NOT.FIN. Fix for zero window bug. fix
;packetizer to see if transfer count fills window. fix packetizer to
;make sure FIN sent after deferred data transmitted.
; UPD ID= 3820, SNARK:<6.MONITOR>TCPTCP.MAC.5, 29-Feb-84 18:09:34 by PAETZOLD
;More TCO 6.1733 - ANBSEC and MNTSEC removal. Bug Fixes. Cleanup.
;<TCPIP.5.3.MONITOR>TCPTCP.MAC.4, 6-Dec-83 23:59:50, Edit by PAETZOLD
;TCO 6.1867 - Use SAVEAC and not SAVP1
;More TCO 6.1733 - bug fixes to packetizer.
;<TCPIP.5.1.MONITOR>TCPTCP.MAC.19, 5-Jul-83 22:30:44, Edit by PAETZOLD
;JFN Interface
;TCP Changes for 5.1
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED
;OR COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
;COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1976, 1985.
;ALL RIGHTS RESERVED.
SEARCH ANAUNV,PROLOG
TTITLE (TCPTCP,TCPTCP,< - ARPANET Transmission Control Protocol>)
IFNDEF REL6,<REL6==1>
Comment \
This module implements most of the Department of Defense (DOD)
Standard Tranmission Control Protocol (TCP) for the TOPS-20AN
Operating system. This code was originally developed at Bolt Beranek
and Newman (BBN) under contract to the Defense Advanced Research
Projects Agency (DARPA).
\
IF1 <IFN IPPDSW,<PRINTX Assembling Packet Printer Routines>>
SUBTTL TCP Process
COMMENT !
This is the top level of the TCP protocol module. Herein are the
TCP initialization, "interprocess communication" between parts of
the TCP, etc.
!
;SIGNAL
;Cause a process to run.
;T1/ (Extended) Target process ID
;T2/ 0 or delta in milliseconds
;TCB/ (Extended) Locked Connection Block
; CALL SIGNAL
;Ret+1: Always
SIGNAL::
TEMP <LCK,FN,PRC,DL>
DMOVEM T1,PRC
ADD DL,TODCLK ; Compute deadline
IFN STANSW,< ;;; Try rounding times that things will run, to prevent
;;; scheduler thrashing ?
TSCHDI==^D32 ; Scheduler interval for TCP events (millisecs) (power of 2)
IFN. T2 ;0 interval? - dont do rounding
ADDI DL,TSCHDI/2 ;round up to next interval
ANDCMI DL,TSCHDI-1 ;discard fraction
ENDIF.
>;IFN STANSW
XMOVEI LCK,PRCLCK(PRC) ; Pointer to lock cell of process
XMOVEI FN,SIGNL0 ; Function
; PRC and DL have args to SIGNL0
CALL LCKCAL ; Lock the lock and call the function
RESTORE
RET
IFN STANSW,<
;RSIGNAL
;Cause a process to run. Like signal, but the process is queued at the
; new time interval, even if already on the queue at an earlier interval.
;T1/ (Extended) Target process ID
;T2/ 0 or delta in milliseconds
;TCB/ (Extended) Locked Connection Block
; CALL RSIGNAL
;Ret+1: Always
RSIGNAL::
TEMP <LCK,FN,PRC,DL>
DMOVEM T1,PRC
ADD DL,TODCLK ; Compute deadline
IFN. T2 ;0 interval? - dont do rounding
ADDI DL,TSCHDI/2 ;round up to next interval
ANDCMI DL,TSCHDI-1 ;discard fraction
ENDIF.
XMOVEI LCK,PRCLCK(PRC) ; Pointer to lock cell of process
XMOVEI FN,RSIGNL0 ; Function
; PRC and DL have args to SIGNL0
CALL LCKCAL ; Lock the lock and call the function
RESTORE
RET
RSIGNL0:
LOCAL <PRC,DL,SAVTCB>
DMOVEM T1,PRC ; Save Process and Deadline
MOVEM TCB,SAVTCB ; Save the signalee
MOVE T3,TODCLK ; Now in milliseconds
MOVEM T3,PRCSGT(PRC) ; Set time of most recent signal
SKIPN @PRCQOF(PRC) ;@TCBQxx(TCB) This TCB already Q'd for task?
JRST SIGNL1 ; No. Just insert in queue.
XMOVEI T1,@PRCQOF(PRC) ;@TCBQxx(TCB) Get pointer to queue in the TCB
CALL DQ ; Dequeue so it at old time
JRST SIGNL1 ; rejoin normal code
RESTORE
>;IFN STANSW
;SIGNL0 Guts of the Signal
;T1/ (Extended) Process block (locked)
;T2/ Wakeup TODCLK
;TCB/ (Extended) Connection block (locked)
; NOINT
; CALL SIGNL0
;Ret+1: Always
SIGNL0: LOCAL <PRC,DL,SAVTCB>
DMOVEM T1,PRC ; Save Process and Deadline
MOVEM TCB,SAVTCB ; Save the signalee
MOVE T3,TODCLK ; Now in milliseconds
MOVEM T3,PRCSGT(PRC) ; Set time of most recent signal
SKIPN @PRCQOF(PRC) ;@TCBQxx(TCB) This TCB already Q'd for task?
JRST SIGNL1 ; No. Just insert in queue.
XMOVEI T1,@PRCQOF(PRC) ;@TCBQxx(TCB) Get pointer to queue in the TCB
CAML DL,@PRCWOF(PRC) ;@TCBTxx(TCB) Compare with deadline already set
JRST SIGNL5 ; Leave in current position.
CALL DQ ; Sooner. Dequeue so it can be inserted
SIGNL1: MOVEM DL,@PRCWOF(PRC) ;@TCBTxx(TCB) NB double idx, here and elsewhere
MOVE T2,PRCQ(PRC) ; Pointer to input queue head
MOVE T3,PRCQOF(PRC) ; Get offset to queue in TCB
SIGNL2: LOAD T2,QNEXT,(T2) ; Get next TCB on input queue
SETSEC T2,INTSEC ; Make extended address
CAMN T2,PRCQ(PRC) ; Back to head?
JRST SIGNL4 ; Yes. Append to end of queue.
MOVE TCB,T2 ; Make right for indirect index
SUBI TCB,0(T3) ; Make TCB point to base of block
CAML DL,@PRCWOF(PRC) ;@TCBTxx(TCB) Found place to insert?
JRST SIGNL2 ; No. Scan more of queue
SIGNL4: MOVE TCB,SAVTCB ; Point TCB at the signalee
XMOVEI T1,@PRCQOF(PRC) ; Get pointer to queue in that TCB
CALL NQ ; And queue it up
SIGNL5: MOVE TCB,PRCQ(PRC) ; Pointer to input queue head
LOAD TCB,QNEXT,(TCB) ; Get first TCB on the queue
SUB TCB,PRCQOF(PRC) ; Make into standard TCB pointer
SETSEC TCB,INTSEC ; Make extended address
MOVE T1,@PRCWOF(PRC) ;@TCBTxx(TCB) Get wakeup time of 1st TCB on Q
MOVEM T1,PRCWAK(PRC) ; That is new wakeup for process
MOVE TCB,SAVTCB ; Restore TCB pointer for caller
CAMG T1,TODCLK ; Wakeup already gone by?
AOS TCPFLG ; Yes. Ensure that we keep running.
AOS INTFLG ; Cause Internet fork run TCPCHK
RESTORE
RET
;TCPPRC
;TCP processing.
; CALL TCPPRC (From Internet fork)
;Ret+1: Always.
TCPPRC::SETZM TCPFLG ; Clear run request
SKIPE INTSVR ; Internet level needs space badly?
SETZM BG+PRCWAK ; Yes. Make BG scavenge what it can
XMOVEI T1,IP ; Select Input Processor
MOVE T2,TCPIPQ ; (Ext) Ptr to TCP input queue head
LOAD T3,QNEXT,(T2) ; Get first thing on the queue
CAIE T3,0(T2) ; Empty if that is the head.
CALL TCPTSK ; Process any available input packets
IFN STANSW,<;;; There is a good chance that scanning the TVTs
;;; Will result in more work for the packetizer to do.
;;; Therefore, do this BEFORE running PZ, and maybe
;;; we will only end up looping through TCPPRC once! (hah!)
XMOVEI T1,TVUSE ;place where we count TVT processing time
MOVE T2,[MSEC1,,TVTOPR] ;routine to run
CALL TIMCAL ;time and run the routine
>;IFN STANSW
CALL TCPRUN ; Run all the other "processes"
XMOVEI T1,BG ; Ptr to Background Process
MOVE T2,PRCWAK(T1) ; Wakeup time for BG
CAMG T2,TODCLK ; Due for a run?
CALL TCPTSK ; Yes. Run BG.
IFE STANSW,<
IFE REL6,<CALL TVTOPR> ; Operate TCP Virtual Terminals
IFN REL6,<CALLX (MSEC1,TVTOPR)> ; Operate TCP Virtual Terminals
SKIPE TCPFLG ; Further work to do?
JRST TCPPRC ; Yes.
RET
>;IFE STANSW
IFN STANSW,<
SKIPN TCPFLG ;further work to do?
RET ;no.
AOS TSKAGN ;count this (undesireable) occurance
JRST TCPPRC
>;IFN STANSW
;TCPCHK
;Periodic check on TCP.
;T1/ A TODCLK to be min'd against
; CALL TCPCHK ; From Internet fork
;Ret+1: Always. T1 as min of arg and next TCP check time
; TCPTIM set to next run time
TCPCHK::
LOCAL <TOD>
MOVEM T1,TOD
MOVE T1,TODCLK ; Now.
ADD T1,TCPCKT ; Check again in 10 seconds
SKIPN TCPON ; Is the TCP on right now?
JRST TCPCH9 ; No.
MOVSI T2,-NPROCS ; Set to scan process table
TCPCH1: MOVE T3,PRCTAB(T2) ; Get pointer to process block
SKIPL T4,PRCWAK(T3) ; Avoid ones which aren't scheduled
CAML T4,T1 ; Less than current best min?
CAIA ; No.
MOVE T1,T4 ; Yes. Take the new value
AOBJN T2,TCPCH1 ; Loop over all processes in the table
SKIPL T4,BG+PRCWAK ; Special case background
CAML T4,T1
CAIA
MOVE T1,T4
TCPCH9: MOVEM T1,TCPTIM ; Save for scheduler test
CAMLE T1,TOD ; Min against arg
MOVE T1,TOD
RESTORE
RET
;TCPRUN
;Run all the TCP tasks.
;Each process has an input queue of TCBs. TCPRUN scans all
;"processes" and for each with a non-empty queue, calls the
;approriate routine for each TCB on the queue. The new wake up time
;is set into the process block.
; CALL TCPRUN
;Ret+1: Always.
TCPRUN: SAVEAC <TCB>
LOCAL <I,PRC>
MOVSI I,-NPROCS ; Set to scan all processes
TCPRU1: MOVE PRC,PRCTAB(I) ; Get pointer to process block
TCPRU2: SKIPGE T1,PRCWAK(PRC) ; Get the wakeup time for this one
JRST TCPRU9 ; No run needed
MOVE T4,PRCQ(PRC) ; Get pointer to queue head
LOAD T3,QNEXT,(T4) ; Get first thing on the input queue
SETSEC T3,INTSEC ; Make extended address
CAMN T3,T4 ; Empty queue?
JRST TCPRU8 ; Yes. Cancel this process.
CAMLE T1,TODCLK ; Time to run?
JRST TCPRU9 ; No. Try next process
XMOVEI T1,PRCLCK(PRC) ; The lock to lock
XMOVEI T2,DQTASK ; The function to call
MOVE T3,PRC ; Process to work on
CALL LCKCAL ; Lock the lock and call the function
MOVE TCB,T1 ; Put in standard place
XMOVEI T1,TCBLCK(TCB) ; The lock on the TCB
XMOVEI T2,TCPTSK ; Subfunction to call
MOVE T3,PRC ; The task to run
CALL LCKCAL ; Lock the TCB and run the function
JRST TCPRU2 ; See if next TCB is due
TCPRU8: SETO T1, ; Empty queue means no wakeup
MOVEM T1,PRCWAK(PRC) ; Set into process block
TCPRU9: AOBJN I,TCPRU1 ; Loop over all processes in table
RESTORE
RET
; Table of process block pointers:
PRCTAB: NCTDSP RA ; Reassembler
NCTDSP PZ ; Packetizer
NCTDSP RX ; Retransmitter
NCTDSP DY ; Delayed Actions
NPROCS==.-PRCTAB
; Note that BG is special in that it does not have an input queue and
; that it must lock TCBH while it is running. IP is also special
; because it is driven by packets arriving from the network.
;DQTASK
;Remove a TCB from a task input queue and reset wakeup time.
;T1/ Process block pointer
; NOINT
; CALL DQTASK
;Ret+1: Always. T1 has pointer to TCB.
DQTASK: SAVEAC <TCB>
LOCAL <PRC,PROCQ>
MOVEM T1,PRC
MOVE PROCQ,PRCQ(PRC) ; Pointer to input queue
LOAD TCB,QNEXT,(PROCQ) ; Get 1st item on the queue
SETSEC TCB,INTSEC ; Make extended address
MOVE T1,TCB ; This the one to return
CALL DQ ; Remove it from the queue
MOVE T2,PRCQOF(PRC) ; Get offset to queue word in TCB
SUBI T1,0(T2) ; Get standard TCB pointer
LOAD TCB,QNEXT,(PROCQ) ; Get 1st item on remaining queue
SETSEC TCB,INTSEC ; Make extended address
CAMN TCB,PROCQ ; Is the queue now empty?
JRST DQTAS8 ; Yes.
SUBI TCB,0(T2) ; Get pointer to base of TCB
SKIPA T2,@PRCWOF(PRC) ; Note double index by PRC and TCB
DQTAS8: SETO T2, ; No need to run
MOVEM T2,PRCWAK(PRC) ; Set new wakeup
RESTORE
RET
;TCPTSK
;Call the process routine and do accounting.
;T1/ (Extended) Process block pointer
;TCB/ (Extended) Locked Connection Block, unless IP or BG being run
; CALL TCPTSK
;Ret+1: Always
TCPTSK::
LOCAL <PRC>
MOVEM T1,PRC
MOVEM PRC,PROC ; Indicate who is running now.
IFN IPPDSW,<
SKIPN STATF ; Taking statistics right now?
JRST TCPTS9 ; No. Just call the function
XMOVEI T1,BG
XMOVEI T2,IP
CAME PRC,T1 ; Running Background?
CAMN PRC,T2 ; Running Input Processor?
JRST TCPTS8 ; Yes. Activate delay not defined
MOVEI T1,ACDLAY ; Select activation delay histogram
MOVE T2,TODCLK ; Now
SUB T2,PRCSGT(PRC) ; Time of most recent signal
CALL DOHIST ; Histogram that delta
TCPTS8:
MOVE T1,PRCTMR(PRC) ; Pointer to appropriate timer
MOVE T2,PRCROU(PRC) ; The routine to call
CALL TIMCAL ; Time the call
JRST TCPTSX
> ; End of IFN IPPDSW
IFN STANSW,<
MOVE T1,PRCTMR(PRC) ; Pointer to appropriate timer
MOVE T2,PRCROU(PRC) ; The routine to call
CALL TIMCAL ; Time the call
JRST TCPTSX
>;IFN STANSW
TCPTS9: CALL @PRCROU(PRC) ; Call the routine
TCPTSX: AOS TASKCT ; Count tasks run
AOS @PRCRNC(PRC) ; Count runs of this particular process
SETZM PROC ; Indicate nobody running now.
RESTORE
RET
;TCPINI
;Initialize TCP module.
; CALL TCPINI (From INTINI)
;Ret+1: Always. TCP ready to run.
TCPINI::NOSKED
MOVEI T1,QSZ ; Size of a queue head
CALL GETBLK ; Get that amount of free storage
JUMPE T1,TCPINX ; Lose
MOVEM T1,TCPIPQ ; That is the TCP input queue
CALL INITQ ; Initialize it
CALL TBFINI ; Initialize Buffer Windows
CALL PZINI ; Initialize Packetizer
JUMPE T1,TCPINX ; Lose
CALL IPINI ; Initialize Input Processor
JUMPE T1,TCPINX ; Lose
CALL RAINI ; Initialize Reassembler
JUMPE T1,TCPINX ; Lose
CALL RXINI ; Initialize Retransmitter
JUMPE T1,TCPINX ; Lose
CALL DYINI ; Initialize Delayed Action Generator
JUMPE T1,TCPINX ; Lose
CALL BGINI ; Initialize Background Routine
JUMPE T1,TCPINX ; Lose
CALL USRINI ; Initialize User Interface
JUMPE T1,TCPINX ; Lose
IFN IPPDSW!STANSW,<CALL STSINI> ; Initialize Statistics
CALL PPINI ; Initialize Packet Printer
CALL TCBINI ; Initialize TCB Hash table
JUMPE T1,TCPINX ; Lose
SETZM TCPSID ; Clear TCP segment idents.
SETOM TCPIFG ; TCP has now been initialized
SETOM TCPON ; The TCP is now on
TCPINX: OKSKED
RET
SUBTTL TCP Input Processor
IFE REL6,<SWAPCD>
IFN REL6,<XSWAPCD>
COMMENT !
Executed in Internet (JOB0) context. The INPUTPROCESSOR is called to
process the queue of packets just input from the network. Each packet
is checked for proper format, protocol version, checksum, etc and if
all is OK, the correct TCB is looked up. IP may respond with an RST
packet if the TCB is not there, it may ACK the packet if it is a
duplicate, or it may process some things from the packet and queue it
for the REASSEMBLER. In particular, IP processes the data
acknowledged by the packet and sets the new window for PZ.
!
;INPROC
;Process the input packet queue.
;Packets have been queued by IMPDV interrupt level.
; CALL INPROC
;Ret+1: always.
INPROC: SAVEAC <PKT,TPKT>
STACKL <<ARGBLK,CHKADW>>
CHKADL ; Room for args to CHKADD
; Top of main loop. Get next packet to be processed.
INPRO0: MOVE T1,TCPIPQ ; Get pointer to input queue head
LOAD PKT,QNEXT,(T1) ; Get pointer to first thing on queue
CAIN PKT,0(T1) ; If that is the head itself
JRST INPROX ; Get out because it is empty (need OKSKED)
SETSEC PKT,INTSEC ; Make extended address
MOVE T1,PKT ; What to dequeue
CALL DQ ; Remove from input queue
SETZ TCB, ; May be a bad packet
MOVX T1,PT%TDI ; TCP received packet
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes
LOAD T1,PIDO,(PKT) ; Internet Data Offset
XMOVEI TPKT,PKTELI(PKT) ; Pointer to Internet packet
ADD TPKT,T1 ; Pointer to TCP packet
CALL TCPCKS ; Compute checksum function
JUMPE T1,INPRO2 ; Jump if good
; Packet has bad checksum. Flush it.
AOS BADPCT ; Count bad packets
MOVX T1,PT%XX5 ; Code for "Flushed by IP"
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes
MOVX T1,PT%TKC ; TCP Killed due to bad checksum
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes
CALL RETPKT ; Return the packet storage
JRST INPRO0 ; And hope for better luck next Pkt
; Packet is OK to process ...
INPRO2:
IFN NICSW,<
LOAD T1,PIPL,(PKT) ; Get total IP length in bytes
LOAD T2,PIDO,(PKT) ; Get IP header length in words
LOAD T3,PTDO,(TPKT) ; Get TCP header length in words
ADD T2,T3 ; Add header lengths
LSH T2,2 ; Convert to bytes
CAML T1,T2 ; Is packet big enough for headers?
JRST INPRO3 ; Yes, continue then
;flush bogus packet
AOS BADPCT ; Count bad packets
CALL RETPKT ; Return the packet
JRST INPRO0 ; And do next packet
INPRO3:
>;IFN NICSW
CALL PKTEND ; Get seq. number of End of Pkt plus 1
STOR T1,PESEQ,(PKT) ; Keep in handy place
; Now setup for a call to CHKADD which looks up the TCB addressed
; by the pkt. If it is found, CHKADD calls INPUT with said TCB locked.
MOVEI PARAMS,ARGBLK ; Arg area on stack (ref. via sec. 0)
LOAD T1,PIDH,(PKT) ; Destination Host
MOVEM T1,LH
LOAD T2,PDP,(TPKT) ; Destination port
MOVEM T2,LP
LOAD T3,PISH,(PKT) ; Source Host
MOVEM T3,FH
LOAD T4,PSP,(TPKT) ; Source Port
MOVEM T4,FP
SETZM JCN ; No JCN. Call is from IP.
SETOM WILDOK ; Wild TCB (Listen) is OK for match
XMOVEI T2,INPUT ; Function to call if found
MOVEM T2,FN
SETZM ARG1 ; No ARG1
SETZM ARG2 ; or ARG2
MOVE T1,PARAMS ; Arg block for CHKADD
CALL CHKADD ; Check the address of the packet
CAMN T1,[-1] ; Packet disposed of successfully?
JRST INPRO0 ; Yes. Do another one.
PUSH P,T1
MOVX T1,PT%XX5 ; Code for "Flushed by IP"
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes
POP P,T1
JN PRST,(TPKT),INPRO5 ; Don't respond to RST!
HRRZ T2,T1 ; Get just the error portion
CAIE T2,EFP+^D7 ; Is it "No such TCB" ?
CAIN T2,ELP+^D7 ; Is it "No such TCB" ?
SETZ TCB,0 ; Yes. TCB used as flag to SNDRST
CALL SNDRST ; Reply with an RST Packet
INPRO5: ; Here when done with packet.
MOVX T1,PT%TID ; TCP done with packet
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes
CALL RETPKT ; Give back the storage
JRST INPRO0 ; And process some more packets
INPROX: ; Here when packet queue completely processed.
CHKADR
RET
;INPUT
;2nd phase of InputProcessor.
;Called via CHKADD from INPROC
;PKT/ (Extended) Internet Packet Pointer
;TPKT/ (Extended) TCP Packet Pointer
;TCB/ (Extended) Locked connection block
; CALL INPUT
;Ret+1: Always. T1 has -1 if Pkt was handled OK,
; 0 if Pkt was on a closed (NOTSYN,NOTSYN) connection,
; -1,,EFP+^D7
INPUT: LOCAL <TESTB>
LOAD T1,TSSYN,(TCB) ; State of Send synchronization
LOAD T2,TRSYN,(TCB) ; State of Recv synchronization
CAIN T1,NOTSYN
CAIE T2,NOTSYN
CAIA ; Still open in some respect
JRST INPUTF ; Packet on closed connection.
CALL CHKSEQ ; See if properly sequenced
MOVEM T1,TESTB ; -1 OK or DUP,,0; IGN,,0; ERR,,EFP+^D7
HLRZ T2,TESTB
CAMN TESTB,[-1] ; TRUE ?
JRST INPUT3
CAIN T2,ERR ; ERROR ?
JRST INPUT4
; Packet is a DUP, IGN, (or "other")
CAIE T2,DUP ; DUPLICATE ?
JRST INPUT2 ; NOTA -- Ignore it
; Duplicate received. (SYN on a synched connection)
AOS DUPKCT ; Count it.
JE PACK,(TPKT),INPUT1 ; No ACK. Forget the following.
JN PRST,(TPKT),INPUT1 ; Don't process ACK from RST packet
LOAD T1,PACKS,(TPKT) ; ACK sequence from Packet
CALL PRCACK ; Process the ACK
INPUT1:
CALL NULPKT ; Does the packet have any contents
SKIPN T1 ; Skip FRCPKT if null
CALL FRCPKT ; Generate an ACK for the DUP
SKIPA T1,[PT%TKD]
; All packets except ERR and good ones come here (ie DUP & IGN)
; Pkt should be IGNored, resyncing connection
INPUT2:
MOVX T1,PT%TKR ; TCP Killed, Resyncing
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes
MOVX T1,PT%XX6 ; IP code
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes
CALL RETPKT ; Release the storage space
JRST INPUTT ; Return true to say it's been handled
; Handle normal, acceptable packet
INPUT3: LOAD T1,PIDH,(PKT) ; Get which incarnation he knows us under
STOR T1,TLH,(TCB) ; Stick it away
CALL PRCPKT ; Process the packet
AOS IPPKCT ; Count as Processed by IP
JRST INPUTT ; and return TRUE
; CHKSEQ said this packet is in error -- no TCB (ERR,,EFP+^D7)
INPUT4: MOVX T1,PT%XX3 ; IP code
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes
MOVX T1,PT%TKX ; TCP Killed, no TCB
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes
HRRO T1,TESTB ; -1,,EFP+^D7 to return
EXIT INPUTX ; (must RETPKT)
; Packet on closed connection (NOTSYN,NOTSYN)
INPUTF: MOVX T1,PT%TKN ; TCP Pkt received on closed connection
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes
TDZA T1,T1 ; Packet not processed (must RETPKT)
INPUTT: SETO T1, ; Return TRUE, packet processed & RETPKT'd
INPUTX: RESTORE
RET
;CHKSEQ
;Determine the validity of a packet on the basis of sequence number,
;acknowledge number, synchronization state, and the presence of SYN
;in the packet.
;PKT/ (Extended) Internet Packet Pointer
;TPKT/ (Extended) TCP Packet Pointer
;TCB/ (Extended) Locked connection block
; CALL CHKSEQ
;Ret+1: always with T1 having ERR,,EFP+^D7; DUP,,0; IGN,,0 or -1 if OK
CHKSEQ: LOAD T1,TRSYN,(TCB) ; Recv state
CAIN T1,SYNABL ; Listening?
JRST CKACKS ; Yes. Validate using ACK sequence
; Fall into CKSYNS
;Fall into CKSYNS from CHKSEQ above
;CKSYNS
;Check sequence number. Used while receive sync is established. A
;packet sequenced within the receive window is accepted; without is
;considered a duplicate.
;Stray SYNs on already synched connections are called DUPlicates and
;will cause a null packet to be emitted which contains the sequence
;we are sending on and the ACK sequence describing what we want to
;hear next. This is enough information for the other end to be able
;to form an RESET packet which will flush this connection. He would
;do this only if he had restarted recently.
;PKT/ (Extended) Internet Packet Pointer
;TPKT/ (Extended) TCP Packet Pointer
;TCB/ (Extended) Locked connection block
; CALL CKSYNS
;Ret+1: always. T1 has -1 if pkt is OK to process, or DUP,,0; IGN,,0
CKSYNS: JE PSYN,(TPKT),CKSYN1 ; Jump if no stray SYN in packet.
LOAD T1,TRSYN,(TCB) ; Get receive state
LOAD T2,PSEQ,(TPKT) ; and sequence number from packet
LOAD T3,TRIS,(TCB) ; and seq. number of original SYN recvd
CAIN T1,SYNRCV ; In SYN-RECEIVED?
CAMN T2,T3 ; or just another copy of orig SYN?
JRST CKSYND ; Call it a dup. to get null pkt sent
CALL SYNAGN ; Resync. the conn. Other end crashed
MOVX T1,<IGN,,0> ; Tell caller to ignore this packet
EXIT CKSYNX
CKSYN1: LOAD T1,TRLFT,(TCB) ; Left window edge
LOAD T2,TRWND,(TCB) ; Width of window
JE PRST,(TPKT),CKSYN2 ; No window diddle if not RST in pkt
SKIPN T3,T2 ; If non-0, use it
MOVX T3,1 ; Otherwise diddle so RST gets done
ADD T3,T1 ; Compute Right plus 1 or width 1 window
MODSEQ T3 ; Keep within right number of bits
LOAD T2,PSEQ,(TPKT) ; Get sequence number of packet
CALL CHKWND ; Is RST within the window?
JRST CKSYN9 ; Go see
CKSYN2: ADD T2,T1 ; Right window edge plus 1
MODSEQ T2
LOAD T3,PSEQ,(TPKT) ; Packet sequence number
LOAD T4,PESEQ,(PKT) ; Sequence number following Pkt
CALL OVRLAP ; Pkt and window have common point(s)?
CKSYN9: SKIPN T1 ; Skip if yes
CKSYND: MOVX T1,<DUP,,0> ; Call it a DUPlicate
CKSYNX: RET ; From CHKSEQ
;CKACKS
;Check ACK Sequence. Validate pkt when not synchronized.
;When receive synchronization has not been established, the only
;acceptable packet is one which will establish receive
;synchronization. Furthermore, if we have established send
;synchronization, the packet, if it acknowledges anything, must
;acknowledge something we have currently sent (eg, a SYN).
;PKT/ (Extended) Internet Packet Pointer
;TPKT/ (Extended) TCP Packet Pointer
;TCB/ (Extended) Locked connection block
; CALL CKACKS
;Ret+1: always. T1 having ERR,,EFP+^D7 else -1 if pkt is ok to process
CKACKS: JN PACK,(TPKT),CKASE1 ; Jump if packet ACKs something
JE PSYN,(TPKT),CKASE2 ; Give error if no SYN and no ACK
JRST CKASET ; SYN and no ACK. Try to open conn.
CKASE1: LOAD T1,TSSYN,(TCB) ; Get send state
CAIN T1,SYNABL ; Have a Send Sequence to check?
JRST CKASE2 ; Error if not waiting for SYN
LOAD T1,TSLFT,(TCB) ; Get Send Left
LOAD T2,PACKS,(TPKT) ; What the Packet ACKS
LOAD T3,TSSEQ,(TCB) ; Current Send Sequence
ADDI T3,1
MODSEQ T3
CALL CHKWND ; Does Pkt ACK someting outstanding?
JUMPN T1,CKASET ; Return TRUE if so
CKASE2:
CALL RSTADR ; Restore Wild foreign address fields
SKIPA T1,[ERR,,EFP+^D7] ; Give error
CKASET: SETO T1, ; Ok to process
RET ; From CHKSEQ
;PRCPKT
;Process Packet which has been determined to be acceptable
;PKT/ (Extended) Internet Packet Pointer
;TPKT/ (Extended) TCP Packet Pointer
;TCB/ (Extended) Locked connection block
; CALL PRCPKT
;Ret+1: always. No value returned. PKT disposed of
PRCPKT: LOCAL <QP,QS> ; OLDR??
; Extract IP & TCP options
CALL TCPXIO ; Extract IP
CALL TCPXTO ; and TCP options
; Avoid some processing overhead if possible
LOAD T1,PCTL,(TPKT) ; Get the control flags
TXNN T1,<PACK!PURG!PRST!PSYN> ; Any control stuff is this packet?
JRST PRCPK7 ; no so save some overhead
; Process RESET
JE PRST,(TPKT),PRCPK1 ; Jump if not a RESET Packet
CALL PRCRST ; Process the reset (may not have PACK)
MOVX T1,PT%TRS
JRST PRCPKR ; Return to caller.
PRCPK1: ; Process ACK
JE PACK,(TPKT),PRCPK2 ; Does the packet acknowledge anything?
LOAD T1,PACKS,(TPKT) ; Yes. Get the ack sequence
CALL PRCACK ; And process the ACK & update send window
PRCPK2: ; Process Urgent
JE PURG,(TPKT),PRCPK5 ; Contains urgent pointer?
CALL PRCURG ; Yes. Process that.
PRCPK5:
;See if there is anything to process in the packet If not return the
;storage and return to caller.
CALL NULPKT ; See if PKT is null
MOVX T2,PT%TID
EXCH T1,T2
JUMPN T2,PRCPKR ; Jump if so. Return to caller.
;Process SYN
JE PSYN,(TPKT),PRCPK7 ; Jump if no SYN
CALL PRCSYN ; Process the SYN
PRCPK7: ; Sets TRLFT at TRIS+1, R-state changed
; Tell USREVT(OK) if SYN.SYN
;Trim input packet if short on space
IFE STANSW,<
CALL TRMPKT ; Trim it size or flush PKT for space
JUMPE PKT,PRCPKX
>;IFE STANSW
;Queue the Packet for the Reassembler. The receive packet queue is
;basically ordered by sequence number, but may have partially
;overlapping segments on it. (try searching right to left)
XMOVEI QS,TCBRPQ(TCB) ; Set scan pointer to Reassembly Q head
JE TRPP,(TCB),PRCPK8 ; Partial Pkt contains left. Skip it.
LOAD QS,QNEXT,(QS) ; Get next packet after the partial one.
SETSEC QS,INTSEC ; Make extended address
;Top of the search for right place to insert loop
PRCPK8: LOAD QS,QNEXT,(QS) ; Get ptr to thing after scan pointer
CAIN QS,TCBRPQ(TCB) ; If that is the head, all has been seen
JRST PRCPK9 ; So insert just before the head (= end)
SETSEC QS,INTSEC ; Make extended address
LOAD T3,PIDO,(QS) ; Internet data offset
XMOVEI T4,PKTELI(QS) ; Pointer to Internet portion
ADD T4,T3 ; Pointer to TCP portion
LOAD T1,TRLFT,(TCB) ; Get Recv Left
LOAD T2,PSEQ,(T4) ; Sequence of current pkt (QS) is end
PUSH P,T2 ; Save sequence number around call
LOAD T3,PSEQ,(TPKT) ; Sequence of new packet
LOAD T4,PESEQ,(PKT) ; End sequence of new packet
CALL OVRLAP ; New pkt fit before this one (QS) in queue?
POP P,T3 ; Recover sequence number for use below
JUMPE T1,PRCPK8 ; No. Advance queue scan ptr. Try next.
;Have a likely place to put the packet. Be sure that we will not
;insert before one which contains left.
MOVE T1,T3 ; Sequence number of packet on queue
LOAD T2,TRLFT,(TCB) ; Recv Left
LOAD T3,PESEQ,(QS) ; End of packet + 1
CALL CHKWND ; Left within this packet?
JUMPN T1,PRCPK8 ; Jump if so. Look at next packet.
;Now QS points to where to insert the new packet (before QS). Do
;checking to see if the packet to the left and packets to the right
;are completely contained by the packet being processed. Release
;storage of those which are. This works well if retranmissions are
;equal to- or bigger than- the original transmissions. It does not
;worry about duplicates of (small) original transmissions which might
;be contained by packets already queued. N.B. It works to replace a
;"partial packet" with a bigger one.
PRCPK9: SETSEC QS,INTSEC ; Make extended address
LOAD T1,QPREV,(QS) ; Get one just skipped (or header)
CAIE T1,TCBRPQ(TCB) ; Avoid fiddling with the header
CALL REMCHK ; Check and maybe remove T1 from Q
; (REMCHK does SETSEC)
PRCP9A: HRRZ T1,QS ; Get current insert point
CAIN T1,TCBRPQ(TCB) ; Is that the header?
JRST PRCP10 ; Yes. Don't check that.
MOVE QP,QS ; Save as predecessor in case needed
LOAD QS,QNEXT,(QP) ; Get next item on Q for next time
SETSEC QS,INTSEC ; Make extended address
MOVE T1,QP ; Check the current item
CALL REMCHK ; Maybe delete it
; (REMCHK does SETSEC)
JUMPN T1,PRCP9A ; Jump if deleted (QS ok for next time)
MOVE QS,QP ; Restore QS (point of insertion)
PRCP10:
; Actually queue the packet for the Reassembler.
MOVE T1,PKT ; Select the packet for EnQueueing
MOVE T2,QS ; Where to enqueue it -- before QS.
CALL NQ ; Enqueue the packet
MOVX T1,PT%XX3 ; Code for "processed by IP"
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes
MOVX T1,PT%TQR
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes
;Now see if the Reassembler has anything to do. Call it if so.
LOAD T4,QNEXT,<+TCBRPQ(TCB)> ; Must be a pkt queued!
SETSEC T4,INTSEC ; Make extended address
LOAD T2,PESEQ,(T4) ; Fetch end sequence for what follows
LOAD T3,PIDO,(T4) ; Internet data offset
XMOVEI T4,PKTELI(T4) ; Pointer to Internet portion
ADD T4,T3 ; Pointer to TCP portion
LOAD T3,PCTL,(T4) ; Get word containing control bits
TXNE T3,<PSYN!PFIN> ; Some kind of control?
JRST PRCP11 ; Yes. RA must process it now.
JN TRCB,(TCB),PRCP11 ; Maybe there is a partially filled buffer
JN TTVT,(TCB),PRCP11 ; No normal buffers for TVTs
LOAD T1,QNEXT,<+TCBRBQ(TCB)> ; Pointer 1st buffer on queue
CAIN T1,TCBRBQ(TCB) ; Empty?
JRST PRCPKX ; Yes. RA cannot do anything.
PRCP11: MOVE T3,T2 ; Recover end sequence
LOAD T1,PSYN,(TPKT) ; If have a SYN, TRLFT already increased
ADD T3,T1 ; so increase right too
MODSEQ T3
LOAD T1,PSEQ,(T4) ; Get sequence number of pkt
LOAD T2,TRLFT,(TCB) ; Recv Left is the point of reassembly
CALL CHKWND ; Did this packet fill the hole?
JUMPE T1,PRCPKX ; Jump if not. No need to run RA.
$SIGNL(RA,0) ; Make Reassembler run now
EXIT PRCPKX
; Here with packet which cannot be processed further. Release storage.
PRCPKR: TDNE T1,INTTRC ; Want trace? (PT%TID,PT%TRS)
CALL PRNPKT ; Yes
MOVX T1,PT%XX6 ; "Flushed by IP" code
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes, Call Packet Printer
CALL RETPKT ; Give back to free storage
PRCPKX: RESTORE
RET
;REMCHK
;Check whether incoming packet contains a packet on a reassembly
;queue. If so, delete the Q'd packet.
;T1/ NOT EXTENDED pointer to packet on a reassembly queue
;PKT/ (Extended) Internet Packet Pointer (incoming pkt)
;TPKT/ (Extended) TCP Packet Pointer (incoming pkt)
;TCB/ (Extended) Locked connection block
; CALL REMCHK
;Ret+1: Always. T1 -1 if packet was deleted or 0 otherwise.
REMCHK: LOCAL <QPKT> ; Holds pointer to queued packet
MOVEM T1,QPKT
SETSEC QPKT,INTSEC ; Make extended address
LOAD T3,PIDO,(QPKT) ; Number of words of IN header
XMOVEI T4,PKTELI(QPKT) ; Pointer to Internet portion
ADD T4,T3 ; Pointer to TCP portion
LOAD T1,PSEQ,(T4) ; Start of queued packet
LOAD T2,PESEQ,(QPKT) ; End + 1 of queued packet
LOAD T3,PESEQ,(PKT) ; End + 1 of Pkt being processed
LOAD T4,PSEQ,(TPKT) ; Start of packet being processed
CAMN T1,T4 ; Quick check for exact duplicate
CAME T2,T3 ; (Faster than OVRLAP)
CAIA ; Have to use OVRLAP to be sure
TDZA T1,T1 ; Fake false return from OVRLAP
CALL OVRLAP ; See if QPKT has something PKT does not
JUMPN T1,REMCH9 ; Jump if so. Must keep both.
MOVE T1,QPKT ; This packet is extra baggage.
CALL DQ ; Remove it from the queue.
PUSH P,PKT
MOVE PKT,T1 ; Put pointer in standard place
MOVX T1,PT%TDR
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes
CALL RETPKT ; Give up possibly full-size packet
POP P,PKT
SKIPA T1,[-1] ; Return true to say something was done
REMCH9: SETZ T1, ; Return false to say nothing was done
RESTORE
RET
;PRCRST
;Process a RESET packet
;PKT/ (Extended) Internet Packet Pointer
;TPKT/ (Extended) TCP Packet Pointer
;TCB/ (Extended) Locked connection block
; CALL PRCRST
;Ret+1: always
PRCRST: AOS RSTRCT ; Count RSTs received
LOAD T1,TSSYN,(TCB) ; Send state
LOAD T2,TRSYN,(TCB) ; Recv state
CAIN T1,FINSNT
CAIE T2,NOTSYN
JRST PRCRS1
; S-FINSNT, R-NOTSYN ; PKT always have ACK??
LOAD T1,PACKS,(TPKT) ; ACK Sequence from packet
CALL PRCACK ; Process it.
EXIT PRCRSX
PRCRS1: JRST PRCRS2 ; prevent hanging when SYNAGN forgets user open timeout
JN TSOPN,(TCB),PRCRS2 ; Jump if user thinks connection is open
JE TSPRS,(TCB),PRCRS2 ; Give error if not persistent
CALL SYNAGN ; Start over.
EXIT PRCRSX
PRCRS2: MOVX T1,EFP+^D7 ; "Connection RESET"
CALL USRERR ; Tell user.
MOVX T1,EFP+^D7 ; "Connection RESET"
CALL ABTCON ; Abort the connection. Flush bufs etc
PRCRSX: RET
;PRCWND
;Process Window Information from incoming packet
;We desire the most recently sent information to be that which is
;acted on. Since retransmitted packets have more current information
;than when they were originally transmitted, the packet sequence is
;not a good basis for deciding if a given packet has more recent
;info. In order to prevent lockups, window information must be
;processed out of sequence.
;(PKT/ (Extended) Internet Packet Pointer)
;TPKT/ (Extended) TCP Packet Pointer
;TCB/ (Extended) Locked connection block
; CALL PRCWND
;Ret+1: always.
PRCWND: LOAD T1,TSWND,(TCB) ; The current window
LOAD T2,PWNDO,(TPKT) ; The new window
STOR T2,TSWND,(TCB) ; Set into the TCB
JUMPN T1,PRCWNX ; Exit if window not closed previously
JUMPE T2,PRCWNX ; Or not now open
; Window opened
LOAD T3,PACKS,(TPKT) ; Get the ACK Sequence from the packet
LOAD T4,TSLFT,(TCB) ; and Send Left from TCB
CAME T3,T4 ; Re-request for Left?
EXIT PRCWNX ; No.
LOAD T1,QNEXT,<+TCBRXQ(TCB)>
CAIN T1,TCBRXQ(TCB) ; Retransmit queue empty?
EXIT PRCWNX ; Yes. No need for retranmitter to run
$SIGNL(RX,0) ; Make Retransmitter run now
PRCWNX: RET
;PRCACK
;Delete acknowledged send data
;Called from IP while processing incoming packets and by BG if it
;needs to fake an ACK for a FIN.
;T1/ ACKnowledge sequence
;TPKT/ (Extended) TCP Packet Pointer (for PRCWND)
;TCB/ (Extended) Locked Connection block
; CALL PRCACK
;Ret+1: always
PRCACK: LOCAL <ACKSEQ,LEFT,OLDR>
MOVEM T1,ACKSEQ ; Save in good place
LOAD T2,TSLFT,(TCB) ; Send Left
MOVEM T2,LEFT ; Save in safe place
EXCH T1,T2 ; Put in desired ACs for CHKWND below
LOAD T3,TSSEQ,(TCB) ; Get the current Send Sequence
ADDI T3,1
MODSEQ T3
CALL CHKWND ; ACKs something outstanding?
IFN STANSW,<
JUMPE T1,PRCAX1 ;may want to send an ACK back
>;IFN STANSW
IFE STANSW,<
JUMPE T1,PRCACX ; Do no more if not
>;IFE STANSW
; Process Urgent
JE TSURG,(TCB),PRCAC0 ; Skip following if not in urgent send mode
MOVE T1,LEFT ; Send left
LOAD T2,TSURP,(TCB) ; Send urgent pointer
SUBI T2,1 ; Consider ACKd if ACK=URP
MODSEQ T2 ; Worry about 32-bit arithmetic
MOVE T3,ACKSEQ ; Number being acknowledged
CALL CHKWND ; See if URP is being ACKd
JUMPE T1,PRCAC0 ; Jump if not
SETZRO TSURG,(TCB) ; Leave urgent send mode
PRCAC0:
; Process window
MOVE OLDR,LEFT ; Old Send Left
LOAD T1,TSWND,(TCB) ; Old Send Window
ADD OLDR,T1 ; Compute Old Send Right
MODSEQ OLDR
CALL PRCWND ; Process Window info in packet
; (TSWND = PWNDO, maybe RX)
STOR ACKSEQ,TSLFT,(TCB) ; ACK Sequence is our Send Left
; Process unACKed SYN
LOAD T1,TSSYN,(TCB) ; Send State
CAIE T1,SYNSNT
JRST PRCAC2 ; No unACKd SYN to handle
MOVX T1,SYNCED
STOR T1,TSSYN,(TCB) ; Set fully synched state on send side
LOAD T2,TRSYN,(TCB) ; Recv state
CAIE T2,SYNRCV
JRST PRCAC1
STOR T1,TRSYN,(TCB) ; Make receive side open too
JN TTVT,(TCB),PRCA0A ; Avoid RA since TVT not assigned
$SIGNL(RA,0) ; Make RA remove any dangling SYN pkt
PRCA0A:
MOVX T1,OK ; General success code
CALL USREVT ; Pass the event to the user
PRCAC1: ; (No TVT error needs work here)
JE TRPP,(TCB),PRCAC2 ; If there is no partial pkt in RA
$SIGNL(RA,0) ; Make Reassembler run now
PRCAC2:
STOR ACKSEQ,TSLFT,(TCB) ; ACK Sequence is our Send Left
MOVEI T1,TCBRXQ(TCB) ; Retransmit queue
SETSEC T1,INTSEC ; Make extended address
MOVE T2,LEFT ; Old Left
MOVE T3,ACKSEQ ; New Left
SETZ T4, ; A send queue is being processed
CALL REMSEQ ; Delete ACKed packets
;Now that the new Send Window location and extent have been set,
;determine if the Packetizer should be started. This means there must
;be something waiting to be sent and window space to send it in and
;the connection state must be right.
LOAD T1,TSSYN,(TCB) ; Get send state
CAIE T1,SYNCED ; Fully synchronized?
JRST PRCAC4 ; No. Don't start PZ
;Test for waiting output on TCP Virtual Terminal connection
JE TTVT,(TCB),PRCA34 ; Jump if not a TVT
LOAD T2,TVTL,(TCB) ; Get the line number of the TVt
JUMPE T2,PRCAC4 ; Jump if not assigned yet
CALL LCKTTY ; Lock TTY & NOINT
JUMPLE T2,PRCA33 ; Inactive or becoming active
PUSH P,T2 ; Save the line block addr
IFE REL6,<CALL TVTOSP> ; Find out if anything waiting to go
IFN REL6,<CALLX (MSEC1,TVTOSP)> ; Find out if anything waiting to go
POP P,T2 ; Recover addr of line block
SKIPA
PRCA33: MOVX T1,0 ; No TTY means no characters
PUSH P,T1 ; Save the count
CALL ULKTTY ; Unlock TTY & OKINT
POP P,T1 ; Get back the count
JUMPG T1,PRCA35 ; Something to be sent. See if OK
JRST PRCAC4 ; Nothing to be sent.
PRCA34: ; Here to test for waiting output on a
; normal TCP data connection
JN TSCB,(TCB),PRCA35 ; Jump if something wait to be sent
LOAD T1,QNEXT,<+TCBSBQ(TCB)>
CAIN T1,TCBSBQ(TCB) ; Any queued from user?
JRST PRCAC4 ; Nothing to be sent
PRCA35:
;Connection state is right and there is something waiting to be sent
LOAD T1,TSLFT,(TCB) ; Get new Send Left
LOAD T2,TSSEQ,(TCB) ; Get current Send Sequence
SUB T2,T1 ; Bytes used in send window
MODSEQ T2 ; (Must be .ge. 0)
LSH T2,2 ; 4 * Used
LOAD T3,TSWND,(TCB) ; Get new Send Window
IMULI T3,3 ; 3 * Offered window
IFN STANSW,<;;; If new window is 0, we may need to restart PZ,
SETZ T1, ;so that a zero window probe is set up
CAMG T2,T3 ;if used/offered .le. 3/4
CALL ENCPKT ; Run PZ, but after RA finishes here.
>;IFN STANSW
IFE STANSW,<
CAMGE T2,T3 ; If Used/Offered .lt. 3/4
CALL FRCPKT ; Run PZ, but after RA
>;IFE STANSW
PRCAC4:
;See if packets which might have been made untransmittable due to
;Send Right moving backwards have now become transmittable. If so
;start the Retransmitter. This is due to the "PUSH problem" in which
;the sender has no idea of the size of the receive buffers and
;therefore cannot tell how many sequence number slots a PUSH will
;absorb.
IFN STANSW,< ;;; if window is 0, we can't rexmit packets anyway.
JE TSWND,(TCB),PRCACX
>;IFN STANSW
LOAD T1,QNEXT,<+TCBRXQ(TCB)>
CAIN T1,TCBRXQ(TCB) ; Any packets on retransmit queue?
JRST PRCACX ; No
MOVE T1,LEFT ; Old Left before ACK
MOVE T2,OLDR ; Old right, before this ACK
LOAD T3,TSSEQ,(TCB) ; Current send sequence
CALL CHKWND ; Any pkts cutoff?
JUMPE T1,PRCACX ; Jump if not
MOVE T1,OLDR ; Right before this ACK,WND processed
MOVE T2,ACKSEQ ; New Left due to this ACK
LOAD T3,TSSEQ,(TCB) ; Current send sequence
IFN STANSW,<;;;correct fencepost error, I think?
CAMN T1,T2 ; CHKWND is inclusive on lower bound, which
JRST PRCACX ; is not what we want here.
>;IFN STANSW
CALL CHKWND ; See if ACK has exposed any pkts
JUMPE T1,PRCACX ; Jump if not
XMOVEI T1,RX ; What to signal -- the retransmitter
MOVX T2,0 ; When to run it -- now
CALL SIGNAL ; But after we finish here
IFN STANSW,<
JRST PRCACX
PRCAX1: ; if ACK is to the right of the window, we want to send an ACK
; back. This allows keepalive pinging to work...
LOAD T1,TSLFT,(TCB) ;get send left
LOAD T3,TSWND,(TCB)
ADD T3,T1 ;compute send right.
MOVE T2,ACKSEQ ;current sequence
SUBI T1,^D100000 ;how old an ACK can be before considerde newer
CALL CHKWND ;see if ACK is beyond current window
JUMPE T1,PRCACX ; (before current window - ignore)
MOVEI T1,^D100 ;in a little while
CALL ENCPKT ; send an ACK back...
>;IFN STANSW
PRCACX: RESTORE
RET
;PRCURG
;Process URGENT pointer from packet
;TCB/ (Extended) pointer to locked connection block
;(PKT/ (Extended) pointer to packet)
;TPKT/ (Extended) pointer to TCP portion of packet
; CALL PRCURG
;Ret+1: Always.
PRCURG: LOCAL <URGPTR>
LOAD URGPTR,PSEQ,(TPKT) ; Sequence number of packet
LOAD T1,PURGP,(TPKT) ; Offset to urgent pointer
ADD URGPTR,T1 ; Compute actual urgent pointer
MODSEQ URGPTR ; Reduce to the right number of bits
JN TRURG,(TCB),PRCUR1 ; Already in urgent receive mode?
STOR URGPTR,TRURP,(TCB) ; No. Set receive urgent pointer
SETONE TRURG,(TCB) ; Mark it as valid.
CALL USRURG ; Signal user of urgent data waiting
EXIT PRCURX
PRCUR1: LOAD T1,TRLFT,(TCB) ; Receive Left pointer
MOVE T2,URGPTR ; What packet says pointer is
LOAD T3,TRURP,(TCB) ; Current Urgent pointer
CALL CHKWND ; See if urgent pointer is "bigger"
JUMPN T1,PRCURX ; Nothing to do if not
STOR URGPTR,TRURP,(TCB) ; Update receive urgent pointer
PRCURX: RESTORE
RET
;PRCSYN
;Process SYN in incoming packet
;PKT/ (Extended) Internet Packet Pointer
;TPKT/ (Extended) TCP Packet Pointer
;TCB/ (Extended) Locked connection block
; CALL PRCSYN
;Ret+1: always
PRCSYN: LOAD T1,TRSYN,(TCB) ; Get receive state
CAIN T1,FINRCV ; Ignore SYN if FIN Received
EXIT PRCSYX
LOAD T2,TSSYN,(TCB) ; Get send state
CAIE T2,SYNCED ; Send sync established?
JRST PRCSY2 ; No.
; S-SYNCED (Recv'd ACK, maybe this packet)
MOVX T1,SYNCED
STOR T1,TRSYN,(TCB) ; Make the state "synchronized" (syn.syn)
MOVX T1,OK ; General success event code
CALL USREVT ; Tell the user connection is open now
JRST PRCSY3
; S-not synced (& not in this packet)
PRCSY2: MOVX T1,SYNRCV ; SYN Received state
STOR T1,TRSYN,(TCB) ; is new Receive state
LOAD T2,PWNDO,(TPKT) ; Extract the window
STOR T2,TSWND,(TCB) ; That is the (first) send window for us
PRCSY3:
LOAD T1,PSEQ,(TPKT) ; Get the packet sequence number
STOR T1,TRIS,(TCB) ; Save for filtering duplicate SYNs
STOR T1,TRURP,(TCB) ; Not in urgent receive mode
ADDI T1,1 ; Advance Recv.Left over SYN
MODSEQ T1
STOR T1,TRLFT,(TCB) ; That is the first Left for us
; If the Reassembler will not see this packet, get an ACK for it now.
; Otherwise, see to it that one is eventually generated.
LOAD T1,PIPL,(PKT) ; Total Internet packet length in octets
LOAD T2,PIDO,(PKT) ; Data offset in 32-bit words
LOAD T3,PTDO,(TPKT) ; TCP data offset in 32-bit words
ADD T2,T3 ; Compute total header length
ASH T2,2 ; In bytes
CAMLE T1,T2 ; Is there any data in TCP portion?
JRST PRCSY4 ; Yes. RA must see it.
LOAD T1,PCTL,(TPKT) ; Get word containing control flags
TXNE T1,<PFIN!PEOL>
JRST PRCSY4 ; RA must see these
CALL FRCPKT ; Force an ACK, now.
JRST PRCSY5
PRCSY4: MOVE T1,TCPRA0 ; Time to wait for RA
CALL ENCPKT ; Encourage an ACK in the future
PRCSY5: AOS SYNRCT ; Count SYNs received
PRCSYX: RET
;SNDRST
;Send a RESET Response to the Foreign TCP.
;PKT/ (Extended) Internet Packet Pointer
;TPKT/ (Extended) TCP Packet Pointer
;TCB/ 0 or (Extended) connection block
; CALL SNDRST Beware of routing options
;Ret+1: always
SNDRST: SAVEAC <TCB,PKT,TPKT>
STACKL <<ADR,4>>
LOCAL <PKTACK,ENDPKT>
LOAD T1,PISH,(PKT) ; Extract source of packet
LOAD T2,PIDH,(PKT) ; Get number he knew me by
LOAD T3,PSP,(TPKT)
LOAD T4,PDP,(TPKT) ; and destination port
DMOVEM T1,ADR ; Swap into address block
DMOVEM T3,2+ADR
LOAD ENDPKT,PESEQ,(PKT) ; Get the end of the packet (plus 1)
SETZ T1, ; Assume no ack
JE PACK,(TPKT),SNDRS0 ; Jump if no ack
LOAD T1,PACKS,(TPKT) ; Extract the ACK Sequence from PKT
SNDRS0: MOVEM T1,PKTACK ; Save for our SEQ
;Now we have tucked away all we need from the incoming packet.
SETZB T1,TCB ; Min packet & no data & no TCB
XMOVEI T2,ADR ; Address block
CALL TCPIPK ; Get packet & initialize header
JRST SNDRSX ; Error. Other end will try again.
SETONE PRST,(TPKT) ; Set the RST bit
STOR ENDPKT,PACKS,(TPKT); Arrange to ACK all of the input packet
SETONE PACK,(TPKT) ; Set the ACK bit
MOVE T1,PKTACK ; ACK Sequence from packet
JUMPE TCB,SNDRS1 ; if there is no TCB
LOAD T1,TSSEQ,(TCB) ; Else use the right thing
SNDRS1:
STOR T1,PSEQ,(TPKT) ; As the Packet Sequence number
MOVE T1,TODCLK ; "Now"
STOR T1,PTG,(PKT) ; Store as Time Generated
CALL TCPCKS ; Compute TCP packet checksum
STOR T1,PTCKS,(TPKT) ; Set into packet
MOVX T1,PT%XX2 ; Fake OP
SKIPN TCB
MOVX T1,PT%XX7
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes, Call the packet printer
MOVX T1,PT%TIR
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes
AOS RSTSCT ; Count errors sent
AOS PZPKCT ; Count Packetized packets
AOS OPPKCT ; Count Output packets
IFN IPPDSW,<
XMOVEI T1,OPDLAY ; Select OP Delay Histogram
SKIPE STATF ; Avoid overhead if not taking stats
CALL TSTAMP> ; Process the timestamp
CALL SNDGAT ; Send it to gateway. (NB: PPROG is 0)
SNDRSX: RESTORE
RET
;REMSEQ
;Remove packets from a queue which are between Left and Right
;T1/ (Extended) Queue head pointer
;T2/ Left
;T3/ Right
;T4/ Receive Queue Flag (0 is SEND is TCBRXQ)
;TCB/ (Extended) Locked connection block
; CALL REMSEQ
;Ret+1: always
REMSEQ: SAVEAC <PKT,TPKT>
STACKL <NEXTRX,RECVF>
LOCAL <Q,LEFT,RIGHT,NEXT>
DMOVEM T1,Q ; T1,T2 to Q,LEFT
MOVEM T3,RIGHT ; T3 to RIGHT
MOVEM T4,RECVF
HRLOI T1,377777 ; Infinity
MOVEM T1,NEXTRX ; is first quess at next RX time
LOAD NEXT,QNEXT,(Q) ; Get first thing on Queue (if any)
SETSEC NEXT,INTSEC ; Make extended address
REMSE1: MOVE PKT,NEXT ; Get the current pkt to standard place
LOAD NEXT,QNEXT,(PKT) ; Set for next time
SETSEC NEXT,INTSEC ; Make extended address
CAMN PKT,Q ; Is this the queue Head?
JRST REMSE7 ; Yes. Done. Whole queue scanned.
MOVE T1,LEFT
LOAD T2,PESEQ,(PKT) ; End of packet plus one
SUBI T2,1 ; Seq. Num of last byte in packet
MODSEQ T2
MOVE T3,RIGHT
CALL CHKWND ; Is end of packet within the window?
JUMPN T1,REMSE2 ; Yes. Go delete the packet.
LOAD T1,PXT,(PKT) ; Get the Transmit time
LOAD T2,PRXI,(PKT) ; and current Retransmit interval
ADD T1,T2 ; Time of next retransmit
CAMG T1,NEXTRX ; MIN with last time of next RX
MOVEM T1,NEXTRX
JRST REMSE1 ; Continue scanning the queue
REMSE2: MOVE T1,PKT
CALL DQ ; Dequeue the packet from the queue
SKIPE RECVF ; Processing receive packet queue?
JRST REMSE6 ; Yes
; Send Queue
LOAD T1,PIDO,(PKT) ; Number of words in the IN header
XMOVEI TPKT,PKTELI(PKT) ; Pointer to Internet portion
ADD TPKT,T1 ; Pointer to TCP portion
; ACK of FIN
JE PFIN,(TPKT),REMSE4 ; Skip this part if not ACK of FIN
MOVX T1,NOTSYN ; Not Synchronized state (dead)
STOR T1,TSSYN,(TCB) ; Set into TCB
LOAD T1,TRSYN,(TCB) ; Get receive state
CAIE T1,NOTSYN ; Also closed?
JRST REMSE4
SKIPE INTSCR ; Running in Secure mode?
CALL SCRCLS ; Yes. Send a Secure Close Option
MOVX T1,XLP+^D3 ; "CLOSED" event code
CALL USREVT ; Pass the word to the user
REMSE4:
;Update estimate of round trip time. Instead of discarding RX'd
;packets, include them in the sum... If the original is not being
;ACKed, then a packet was lost so something is probably overloaded,
;slow down RX in either case
MOVE T1,TODCLK ; "Now"
LOAD T2,PTG,(PKT) ; Time packet was originally generated
SUB T1,T2 ; How long it took to ACK it
LOAD T2,TMXRT,(TCB) ; MAX Round Trip time
CAMLE T1,T2 ; Is this longer?
STOR T1,TMXRT,(TCB) ; Save new max
IFE STANSW,<
JE <TRXPN,TRXPD>,(TCB),REMSE5 ; Newer algorithm
>;IFE STANSW
LOAD T2,TMNRT,(TCB) ; Min Round Trip time
CAMGE T1,T2 ; Is this one shorter?
STOR T1,TMNRT,(TCB) ; Save new min
LOAD T2,TMXRT,(TCB) ; MAX Round Trip time
CAMLE T1,T2 ; Is this longer?
STOR T1,TMXRT,(TCB) ; Save new max
IFN STANSW,<;;; let TMNRT and TMXRT get updated always
JE <TRXPN,TRXPD>,(TCB),REMSE5 ; Newer algorithm
>;IFN STANSW
JRST REMSE6
REMSE5: LOAD T4,TSMRT,(TCB) ; Current estimate
IFE STANSW,<
MOVE T3,T4
LSH T3,2
>;IFE STANSW
IFN STANSW,< ;Alan Larson's retransmission fix
; CAMGE T1,T4
; EXCH T1,T4
>;IFN STANSW
MOVX T2,1
MOVNI T3,@TCPRXF ; Positive scale factor
LSH T2,(T3) ; Scaled 1.0
SUB T2,TCPRXS ; Scaled (1-alpha)
IMUL T1,T2 ; RTT*(1-alpha)
IMUL T4,TCPRXS ; SRTT*alpha
ADD T1,T4
LSH T1,@TCPRXF ; New estimate of round trip time
STOR T1,TSMRT,(TCB)
REMSE6: ; Both Send and Receive Queues
SETZRO PPROG,(PKT) ; Say no need for Pkt at program level
JN PINTL,(PKT),REMSE1 ; Jump if interrupt will do the INTRBF
MOVX T1,PT%TDR
SKIPN RECVF
MOVX T1,PT%TDX
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes
CALL RETPKT ; Return the storage to free area
JRST REMSE1 ; Go look at more of the queue
REMSE7: SKIPE RECVF ; Processing send retransmit queue?
JRST REMSEX ; No
CAMN PKT,NEXT ; Queue empty now?
JRST REMSE8 ; Yes.
IFN STANSW,< ;;;dont start rexmitter if waiting for window to open
JE TSWND,(TCB),REMSEX
>;IFN STANSW
XMOVEI T1,RX ; Select the Retransmitter
MOVE T2,NEXTRX ; Computed next retransmit time
SUB T2,TODCLK ; Convert to increment
IFE STANSW,<
CALL SIGNAL ; Make the retransmitter run then
>;IFE STANSW
IFN STANSW,<
CALL RSIGNAL ; run rexmitter then instead of when
>;;;IFN STANSW ; currently queued for.
JRST REMSEX
REMSE8: MOVEI T1,TCBQRX(TCB)
SETSEC T1,INTSEC
REMSEX: RESTORE
RET
;ABTCON
;Abort a connection
;Clears queues and forces send and receive buffers back to the user
;with the (argument) Code. The connection is set to Not Synchronized.
; Called both from PRCRST and from the ABORT JSYS.
;TCB/ (Extended) Locked Connection Block
;T1/ Event Code (ELP+^D14 - reset)
; (ELT+^D4 - no free TVTs)
; CALL ABTCON
;Ret+1: always
ABTCON::
SAVEAC <PKT>
LOCAL <CODE>
MOVEM T1,CODE
;Buffers flushed via USRBFE/F are placed onto the TCPDBQ by BFRDUN if
;the have wait bits assigned (for wait or interrupt) others are
;returned directly to free storage.
CALL FLSSBF ; Flush SEND buffers
MOVE T1,CODE
CALL FLSRBF ; Flush RECV buffers
; Flush packets from Retransmission Queue
ABTCOA: LOAD T1,QNEXT,<+TCBRXQ(TCB)> ; Get first thing on Retrans Q
CAIN T1,TCBRXQ(TCB) ; Is that the head itself?
JRST ABTCOB ; Yes. The queue is now empty.
SETSEC T1,INTSEC ; Make extended address
CALL DQ ; Remove from the Retransmission queue
SETZRO PPROG,(T1) ; Program level now has no claim on PKT
JN PINTL,(T1),ABTCOA ; Jump if INTRBF will return the space
MOVE PKT,T1 ; Put pointer in right place for RETPKT
CALL RETPKT
JRST ABTCOA
;Flush packets from Received Packet Queue
ABTCOB: LOAD T1,QNEXT,<+TCBRPQ(TCB)>
CAIN T1,TCBRPQ(TCB)
JRST ABTCOC
SETSEC T1,INTSEC ; Make extended address
CALL DQ
MOVE PKT,T1
CALL RETPKT
JRST ABTCOB
ABTCOC:
;Flush any Partially Filled Packet
NOSKED
LOAD PKT,TSCPK,(TCB) ; Possible packet
SETZRO TSCPK,(TCB) ; is gone
OKSKED
SKIPE PKT ; IF have one
CALL RETPKT ; release it
; Collect buffers for this TCB from TCPBDQ and place them on TCPIDQ.
; Then release them all.
NOSKED ; Prevent user from snatching bufs
MOVE T1,TCPIDQ
CALL ABTCO1 ; Collect up all dead ones
OKSKED
MOVE T1,TCPIDQ
MOVE T2,T1
CALL CLEARQ ; Return all to free storage
; Force state to NOT.NOT
MOVX T1,NOTSYN
STOR T1,TSSYN,(TCB) ; Set Send state to Not Synchronized
STOR T1,TRSYN,(TCB) ; Set Recv state to Not Synchronized
; Notify the user
MOVE T1,CODE
CALL USREVT ; Pass the event to the user
; Maybe need a secure close
SKIPE INTSCR ; Running in Secure mode?
CALL SCRCLS ; Send a Secure Close Option
RESTORE
RET
;ABTCO1(Q)
;Release buffers from Buffer Done Queue.
;T1/ (Extended) Pointer to a queue head
;TCB/ (Extended) Locked connection block
;NOSKED How do we know they are finished??
; CALL ABTCO1
;Ret+1: Always. No buffers on DEADBQ owned by TCB; BIDX bits released
ABTCO1: SAVEAC <BFR>
LOCAL <NXTBFR,DEADBQ>
MOVEM T1,DEADBQ
MOVE NXTBFR,TCPBDQ ; Pointer to queue head
ABTCO2: MOVE BFR,NXTBFR
LOAD NXTBFR,QNEXT,(BFR) ; Get next item on the list
SETSEC NXTBFR,INTSEC ; Make extended address
CAMN BFR,TCPBDQ ; Back to head means done
JRST ABTCOX
LOAD T1,BTCB,(BFR) ; Get owning TCB
SETSEC T1,INTSEC ; Make extended address
CAME T1,TCB ; It is this connection?
JRST ABTCO2 ; Go try next
MOVE T1,BFR ; Pointer to the item
CALL DQ ; Remove it
LOAD T1,BIDX,(BFR) ; Get the wait bit index
CALL RELWTB ; Release it
MOVE T1,BFR ; Pointer to the block again
MOVEI T2,DEADBQ ; Where to stash the buffer for later
CALL NQ ; Release when not NOSKED
JRST ABTCO2
ABTCOX: RESTORE
RET
;SYNAGN
;Return a connection to Synchable state
;TCB/ (Extended) Locked Connection Block
; CALL SYNAGN
;Ret+1: always
SYNAGN: SAVEAC <BFR,PKT>
CALL RSTADR ; Restore wild address fields
;Moving Send Left to Send Sequence makes the next incarnation of this
;connection different from the one which has just failed and is
;getting resynched. Thus, RSTs caused by old copyies of the original
;SYN will be unacceptable and will not wipe out the new incarnation.
LOAD T1,TSSEQ,(TCB) ; Send sequence = SYN + DATA
STOR T1,TSLFT,(TCB) ; Where to begin next time.
MOVX T1,SYNABLE
STOR T1,TRSYN,(TCB) ; Reset the Recv state
LOAD BFR,TRCB,(TCB) ; Get current receive buffer
JUMPE BFR,SYNAG1 ; Jump if no receive current buffer
SETSEC BFR,INTSEC ; Make extended address
SETZRO TRCB,(TCB) ; Forget about it
CALL RSTBFR ; Reset it to virgin state (hard to do)
MOVE T1,BFR ; What to NQ
MOVEI T2,TCBRBQ(TCB) ; The receive buffer queue
SETSEC T2,INTSEC ; Make extended address
LOAD T2,QNEXT,(T2) ; First thing on the queue
SETSEC T2,INTSEC ; Make extended address
CALL NQ ; Make the recycled buffer first again
SYNAG1:
SETZRO TRPP,(TCB) ; Forget about partially processed PKT
SYNAG2: LOAD T1,QNEXT,<+TCBRPQ(TCB)> ; Receive Packet Queue
CAIN T1,TCBRPQ(TCB) ; Empty now?
JRST SYNAG3 ; Yes
SETSEC T1,INTSEC ; Make extended address
CALL DQ ; Dequeue the packet
MOVE PKT,T1 ; Put in standard place
CALL RETPKT ; Return possibly full size packet
JRST SYNAG2
SYNAG3:
MOVX T1,SYNABL
STOR T1,TSSYN,(TCB) ; Reset Send state
LOAD BFR,TSCB,(TCB) ; Get current send buffer
JUMPE BFR,SYNAG4 ; Jump if none
SETSEC BFR,INTSEC ; Make extended address
SETZRO TSCB,(TCB) ; Forget there was one
CALL RSTBFR ; Reset the buffer
MOVE T1,BFR
MOVEI T2,TCBSBQ(TCB) ; Send buffer queue
SETSEC T2,INTSEC ; Make extended address
LOAD T2,QNEXT,(T2) ; First thing on the queue
CALL NQ ; Make recycled buffer first again
SYNAG4:
PUSH P,Q1 ; save this AC
XMOVEI Q1,TCBRXQ(TCB) ; Retransmit queue
SYNAG5: LOAD T1,QNEXT,(Q1) ; Get next item
SETSEC T1,INTSEC ; Make extended address
CAMN T1,Q1 ; Qhead point to self?
JRST SYNAG6 ; Yes, done
CALL DQ ; No, dequeue item
PIOFF ; Keep flags from changing
SETZRO PPROG,(T1) ; Program isnt keeping this anymore
LOAD T2,PINTL,(T1) ; Get int-level-has-pkt flag
PION ; We are safe
SKIPN T2 ; Does (or did) int-level have it?
CALL RETBLK ; No, return it
JRST SYNAG5 ; Loop till Q empty
SYNAG6: POP P,Q1 ; Restore this AC
JE TSPRS,(TCB),SYNAGX ; Check if this end is initiator
JN <TWLDN,TWLDT,TWLDP>,(TCB),SYNAGX ; Don't send if no 4N host
MOVE T1,TCPSY0 ; 2 second delay to prevent loop if
CALL DLAYPZ ; Foreign TCB non-x and RST causing us to loop
SYNAGX: RET
;RSTADR(TCB)
;Restore wild address fields
;A delayed duplicate may cause a foreign TCP to emit an RST packet to
;kill what it thinks is a half-open connection here. If in fact the
;connection has been closed and deleted, there may be a listening TCB
;which CHKADD will find and bind to the source of the RST.
;Subsequently the TCP will just flush the RST and will not emit any
;response to it. This routine is called to undo the temporary
;binding.
;TCB/ (Extended) Locked connection block
; CALL RSTADR
;Ret+1: Always.
RSTADR: LOAD T1,TOPLH,(TCB) ; Restore original local host
STOR T1,TLH,(TCB)
LOAD T1,TOPFH,(TCB) ; Restore original foreign host
STOR T1,TFH,(TCB)
LOAD T1,TOPFP,(TCB) ; Restore original foreign port
STOR T1,TFP,(TCB)
SETZRO TIPOR,(TCB) ; No received IP option count
SETZM TCBIR(TCB) ; Nor data
SETZRO TTPOR,(TCB) ; No received TCP option count
SETZM TCBTR(TCB) ; Nor data
SETO T1, ; Don't change options
CALL TCPUOP ; But re-merge
SETZ T1,
CALL TCPMXP ; Undo max packet size
RET
;IPINI
;Initialize IP process block
; CALL IPINI
;Ret+1: Always
IPINI: LOCAL <PRC>
XMOVEI PRC,IP ; Pointer to process block
; Following are guards against really bad things
SETZM PRCQ(PRC) ; Be sure queue is empty.
SETZM PRCLCK(PRC) ; Should never try to lock IP lock!
SETZM PRCWAK(PRC) ; Be sure to run it promptly!
SETZM PRCQOF(PRC) ; Clear unused cells
SETZM PRCWOF(PRC)
XMOVEI T1,INPROC ; Routine address
MOVEM T1,PRCROU(PRC) ; Set into the control block
XMOVEI T1,IPRNCT ; Run counter address
MOVEM T1,PRCRNC(PRC)
XMOVEI T1,IPUSE ; CPU usage meter
MOVEM T1,PRCTMR(PRC)
MOVX T1,QSZ ; Size of a queue head
CALL GETBLK ; Queue head must be in Internet section
JUMPE T1,IPINIX ; Lose, need better way (lose memory)
MOVEM T1,TCPIDQ ; Save pointer to it
CALL INITQ ; Initialize it
HRROI T1,-1
IPINIX: RESTORE
RET
SUBTTL TCP Reasembler
COMMENT !
The REASEMBLER is called with TCB set up to point at a (locked)
connection block. Its function is to transfer data from packets
queued for it by the Inputprocessor into user buffers queued by RECV
calls on the TCP. The REASEMBLER also processes certain control bits
in the packets such FIN. Once handled, the PACKETIZER is signaled so
that it may generate an ACK for the packet. TCP Virtual Terminal
characters are moved into line buffers via the TELNET protocol
routines in the NVT code.
!
;REASEM
;Reasembler.
;TCB/ (Extended) Pointer to connection block
; CALL REASEM
;Ret+1: always
REASEM: SAVEAC <PKT,TPKT,BFR>
LOCAL <BYTNUM,XFRCNT,RCVLFT,LINBLK>
SETO LINBLK, ; Indicate no terminal line locked
; <0 must check TTVT, not locked
; (NOTSYN or no TVT assigned)
; =0 non-standard, locked
; >0 have TTVT (& TVTL & R-SYNCED) & locked
JE TTVT,(TCB),REASMN ; Jump if not a TCP Virtual Terminal
LOAD T1,TRSYN,(TCB) ; State of receive side
CAIE T1,SYNCED ; OK to pass data now?
JRST REASMN ; No. But process control
LOAD T2,TVTL,(TCB) ; Get the line number
JUMPE T2,REASMN ; Jump if none assigned yet or gone away
IFE REL6,<CALL TVTCHK> ; Lock the terminal data base
IFN REL6,<CALLX (MSEC1,TVTCHK)> ; Lock the terminal data base
JRST [JUMPLE T2,REASMN ;Nothing locked (inactive, becoming active)
SETZ T2, ; Locked & non-standared so
JRST .+1] ; must update LINBLK
MOVEM T2,LINBLK ; Save here for later
REASMN:
; Top of main loop:
; Check the queue of packets from the InputProcessor. If there are
; no packets, there is nothing that the Reassembler can do.
REASM0: LOAD PKT,QNEXT,<+TCBRPQ(TCB)> ; Get pointer to first thing on Q
CAIN PKT,TCBRPQ(TCB) ; Receive packet queue empty?
JRST REASMX ; Yes. Get out.
SETSEC PKT,INTSEC ; Make extended address
LOAD T1,PIDO,(PKT) ; Internet data offset in words
XMOVEI TPKT,PKTELI(PKT) ; Pointer to Internet portion of packet
ADD TPKT,T1 ; Pointer to TCP portion of packet
; Set BFR to 0 if this is a TVT so as to avoid code which
; fiddles with normal buffers.
JE TTVT,(TCB),REAS0A ; If not TVT go get BFR
MOVX BFR,0 ; Indicate no normal buffer
SKIPG T2,LINBLK ; Set arg.
JRST REAS0A ; Not a TVT or gone away
IFE REL6,<CALL TVTISP> ; Get space in input buffer
IFN REL6,<CALLX (MSEC1,TVTISP)> ; Get space in input buffer
JRST REASM3 ; Forge ahead to (say) open conn/closing
REAS0A:
; Try to find a user buffer for filling. This could be the Receive
; current buffer left from a previous pass or one queued from
; a user RECV call.
LOAD BFR,TRCB,(TCB) ; Get 0 or receive current buffer
SETSEC BFR,INTSEC ; Make extended address
TRNE BFR,-1 ; Is there a current buffer?
JRST REASM3 ; Go use what is left of it
LOAD BFR,QNEXT,<+TCBRBQ(TCB)> ; Pointer to first buffer queued
CAIE BFR,TCBRBQ(TCB) ; Empty if that is the queue head
JRST REASM1 ; Go dequeue the buffer and use it
; No buffer available. If there is a partially processed packet,
; we can do no more. Otherwise there may be controls (SYN)
; which can be handled. This allows a SYN to be ACKd and thus a
; connection to open before any user RECVs have been done.
JN TRPP,(TCB),REASMX ; Get out if there is a partial packet
MOVX BFR,0 ; Indicate no buffer to use.
JRST REASM3 ; Proceed
; Dequeue buffer at the head of the receive buffer queue
REASM1: SETSEC BFR,INTSEC ; Make extended address
MOVE T1,BFR ; Pointer to the buffer
CALL DQ ; Dequeue it
STOR BFR,TRCB,(TCB) ; And remember as the current buffer
REASM3: LOAD RCVLFT,TRLFT,(TCB)
JE TRPP,(TCB),REASM4 ; Jump if not continuing a packet
IFE STANSW,<
LOAD BYTNUM,TRCBY,(TCB) ; Where to resume in this packet
JRST REAS13 ; Go process the remainder
>;IFE STANSW
IFN STANSW,<;;; CLYNN duplicate data fix
JRST REAS11
>;IFN STANSW
; First time we have seen this packet. Flush it unless there is
; some unseen stuff in it.
REASM4: AOS RAPKCT ; Count packets seen by Reassembler
MOVX T1,PT%TRA
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes
MOVE T1,RCVLFT ; Recv Left -- start of "The present"
LOAD T2,TRWND,(TCB) ; Get current window width
ADD T2,T1 ; Form Recv.Right -- beginning of "Past"
ADDI T2,1 ; Allow SYN thru 0-window crock
MODSEQ T2 ; T1,T2 are Left and Right of the past
LOAD T3,PSEQ,(TPKT) ; Sequence of the packet
LOAD T4,PESEQ,(PKT) ; Get end + 1 from packet
CALL OVRLAP ; Packet included in the past?
JUMPN T1,REASM5 ; Jump if not.
IFN IPPDSW,<
MOVEI T1,RADLAY ; Select Reassembler delay histogram
SKIPE STATF ; Actually taking statistics?
CALL TSTAMP ; Yes. Process the timestamp.
> ; end of IFN IPPDSW
MOVX T1,PT%XX4 ; Code for reassembler
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes, Call the packet printer
MOVE T1,PKT ; Pointer to this useless packet
CALL DQ ; Dequeue it
CALL RETPKT ; Give space to freestorage
JRST REASM0 ; Try the next packet.
REASM5:
; If Left is within the current packet, there is something which
; can be reassembled out of it.
LOAD T1,PSEQ,(TPKT) ; Start of the packet
MOVE T2,RCVLFT ; Next thing needed for reassembly
LOAD T3,PESEQ,(PKT) ; End of the packet
CALL CHKWND ; Left within the packet?
JUMPE T1,REASMX ; Jump if not. Must wait for it to show
; Setup BYTNUM to be the byte number within the packet where data
; handling should start.
IFN STANSW,<;;; CLYNN duplicate data fix
REAS11:
>;IFN STANSW
LOAD RCVLFT,TRLFT,(TCB) ; Get updated copy
MOVE BYTNUM,RCVLFT ; Next to be reassembled
LOAD T1,PSEQ,(TPKT) ; Start of packet
SUB BYTNUM,T1 ; Offset into data
JUMPLE BYTNUM,REAS12 ; No control to worry about
LOAD T1,PSYN,(TPKT) ; Get value of SYN bit
SUBI BYTNUM,0(1) ; Discount space taken by SYN
REAS12:
IFN STANSW,<;;; CLYNN duplicate data fix
MODSEQ BYTNUM
>;IFN STANSW
; Setup XFRCNT to be the number of bytes to transfer out of the
; packet into the user buffer.
REAS13: LOAD XFRCNT,PIPL,(PKT) ; Get total length
LOAD T1,PIDO,(PKT) ; Number of words in Internet header
LOAD T2,PTDO,(TPKT) ; Number of words in TCP header
ADD T1,T2 ; Number of header words
ASH T1,2 ; Number of header bytes
SUB XFRCNT,T1 ; Number of TCP data bytes
SUB XFRCNT,BYTNUM ; Forget already processed bytes
PUSH P,XFRCNT ; Save packet count (number available)
SKIPG T2,LINBLK ; Is this a TVT w/ standard data block?
TDZA T1,T1 ; No. Assume no buf and no space
IFE REL6,<CALL TVTISP> ; Get space in input buffer
IFN REL6,<CALLX (MSEC1,TVTISP)>
JUMPE BFR,REAS14 ; Jump if no buffer
LOAD T1,BCNT,(BFR) ; Get number of holes in the buffer
REAS14:
CAMLE XFRCNT,T1 ; Min of available bytes and space
MOVE XFRCNT,T1 ; is the actual transfer count
JUMPLE XFRCNT,REAS15 ; Jump if nothing to transfer.
ADDM XFRCNT,BYTRCT ; Count bytes received
MOVE T1,BYTNUM ; Where to start transfer from packet
LOAD T3,PTDO,(TPKT) ; Get TCP data offset in words
IDIVI T1,4 ; Get words and byte into data
ADD T1,T3 ; Get word offset from TPKT
HLL T1,[POINT 8,.-.(TPKT),-1
POINT 8,.-.(TPKT),07
POINT 8,.-.(TPKT),15
POINT 8,.-.(TPKT),23](T2)
SKIPG T2,LINBLK ; Addr of dynamic data area
JRST REA14A ; None
MOVE T3,XFRCNT ; How much to transfer
IFE REL6,<CALL PRCTVT> ; Process TVT chr on line in T2
IFN REL6,<CALLX (MSEC1,PRCTVT)> ; Process TVT chr on line in T2
JRST REAS15
REA14A:
MOVE T2,XFRCNT ; How much to transfer
CALL PRCDAT ; Process the data
REAS15: POP P,T1 ; Restore the packet count
; If the packet has been emptied into a buffer after the connection
; has become synchronized in the receive direction, process the
; trailing controls and flush the packet. If the buffer was
; filled, report the fact to the user.
LOAD T2,TRSYN,(TCB) ; Get receive state
CAIE T2,SYNCED ; Synchronized?
CAIN T2,FINRCV ; or FIN Received?
CAIA ; Yes.
JRST REAS19 ; No. Save as partial packet.
; ?? See if user buffer is full here for USRBFF a la reas18
CAME T1,XFRCNT ; Emptied all data from the packet?
JRST REAS18 ; No.
JN TTVT,(TCB),REAS16 ; Assume EOL and buffer if TVT
JUMPN BFR,REAS16 ; Into a buffer?
JN PEOL,(TPKT),REAS18 ; Lack buffer to report EOL in
REAS16:
; Packet empty, finish it off & loop back for next
SETZRO TRPP,(TCB) ; Indicate no partial packet waiting
IFN STANSW,<;;; Count this packet so we can computer "interactiveness"
LOAD T1,TINTR,(TCB) ;get current packet count
CAIGE T1,TINTHR ;if currently less than threshold
ADDI T1,1 ; then increment the count...
STOR T1,TINTR,(TCB) ;save new value
>;IFN STANSW
; See if we can leave receive urgent mode. The urgent pointer must
; coincide with the end of a packet plus one. So, we need only test the
; PESEQ for equality with the urgent pointer to tell if data up to the
; urgent pointer has been given to the user.
JE TRURG,(TCB),REAS17 ; Forget if not in receive urgent mode
LOAD T1,PESEQ,(TPKT) ; Get the end plus one of this packet
LOAD T2,TRURP,(TCB) ; And the receive urgent pointer
CAMGE T1,T2 ; Will the urgent pointer be acked? (FIN)
JRST REAS17 ; No.
SETZRO TRURG,(TCB) ; Leave receive urgent mode
REAS17:
JN TTVT,(TCB),REA17A ; No EOL processing on TVTs
JE PEOL,(TPKT),REA17A
CALL PRCEOL ; Process EOL
REA17A:
JE PFIN,(TPKT),REA17B
CALL PRCFIN ; Process FIN if present, generate ack
REA17B:
LOAD T1,PESEQ,(PKT) ; Get the sequence number following Pkt
STOR T1,TRLFT,(TCB) ; Set the new Left
CALL NUWNDO ; Update the window, maybe generate ACK
IFN IPPDSW,<
MOVEI T1,RADLAY ; Select Reassembler delay
SKIPE STATF ; Taking statistics right now?
CALL TSTAMP ; Yes, process the timestamp
> ; end of IFN IPPDSW
MOVX T1,PT%XX4 ; "Reassembled" code
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes, Print the packet
MOVX T1,PT%TDR
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes
; Since we have completely finished with this packet, dequeue it
; and return the space to free storage.
MOVE T1,PKT ; Pointer to the packet
CALL DQ ; Dequeue it
CALL RETPKT ; Free the area
JRST REASM0 ; And process the next packet.
; Here when more remains in packet
REAS18: JUMPE BFR,REAS19 ; Jump if no buffer
JN BCNT,(BFR),REAS19 ; Jump if buffer not filled
MOVX T1,OK ; Indicate buffer is good
SETZRO TRCB,(TCB) ; Indicate no current buffer anymore
CALL USRBFF ; User buffer filled routine
REAS19:
; Save the partial packet for the next time through.
SETONE TRPP,(TCB) ; Set the partial packet waiting bit
IFE STANSW,<
MOVE T1,XFRCNT ; Number transferred
ADD T1,BYTNUM ; Where the transfer started
STOR T1,TRCBY,(TCB) ; Is where to resume in the packet
>;IFE STANSW
IFN STANSW,<;;; CLYNN duplicate data fix
ADD RCVLFT,XFRCNT
STOR RCVLFT,TRLFT,(TCB)
>;IFN STANSW
JUMPN BYTNUM,REAS20 ; First time we have
JE PSYN,(TPKT),REAS20 ; Seen a packet with a SYN in it?
IFE STANSW,<;;; CLYNN duplicate data fix
ADD RCVLFT,XFRCNT ; Yes. Update Left
STOR RCVLFT,TRLFT,(TCB)
>;IFE STANSW
MOVX T1,^D500
CALL ENCPKT ;FRCPKT ; Get it ACK'd
REAS20:
JUMPE BFR,REASMX ; If TVT input full, stop now
JE TRCB,(TCB),REASM0 ; Try to get another buffer from queue
REASMX: SKIPL T2,LINBLK ; Do we have a term line locked?
CALL ULKTTY ; Yes. Unlock it
RESTORE
RET
;PRCEOL
;Process EOL.
;TCB/ (Extended) Locked connection block
;BFR/ (Extended) Current buffer
; CALL PRCEOL
;Ret+1: always
PRCEOL: MOVX T1,<<OK>B7+TCP%EL> ; OK code, with end of letter flag
SETZRO TRCB,(TCB) ; no current buffer
CALL USRBFF ; Tell user buffer filled
MOVX BFR,0 ; Indicate no current buffer
RET
;PRCFIN
;Process FIN.
;TCB/ (Extended) Locked connection block
; CALL PRCFIN
;Ret+1: always
PRCFIN: MOVX T1,FINRCV ; FIN Received state
STOR T1,TRSYN,(TCB) ; Set into TCB
AOS FINRCT ; Count FINs received
MOVX T1,^D100
CALL ENCPKT ; Make sure its ACKed promptly
RET
;PRCDAT
;Process data from packet.
;TCB/ (Extended) Locked connection block
;PKT/ (Extended) Packet
;TPKT/ (Extended) pointer to TCP part of packet
;BFR/ (Extended) Buffer
;T1/ Byte pointer into packet
;T2/ Count of bytes to transfer to buffer
; CALL PRCDAT
;Ret+1: always
PRCDAT: LOCAL <PKTPTR,XFRCNT>
DMOVEM T1,PKTPTR
IFN STANSW,<;;; Dont call SETTUM for DEC TCBs (buffers are resident!)
JE TDEC,(TCB),PRCDA1
NOSKED ;is this necessary?
MOVE T1,PKTPTR ; Source byte pointer
LOAD T2,BPTR,(BFR) ; Destination byte pointer
MOVE T3,XFRCNT ; Number to do
MOVEI T4,1 ; Monitor-to-monitor transfer
CALL XFRDAT ; Do the data transfer
STOR T2,BPTR,(BFR) ; Store back updated pointers
MOVEM T1,PKTPTR
LOAD T1,BCNT,(BFR) ; Get number of holes in buffer at start
SUB T1,XFRCNT ; Reduce by number transferred
STOR T1,BCNT,(BFR) ; Update the count in the buffer
LOAD T3,TRBS,(TCB) ; Get receive bufferspace (due to RECVs)
SUB T3,XFRCNT ; Remove space just filled from window
STOR T3,TRBS,(TCB)
OKSKED
JRST PRCDAX ;exit
PRCDA1:
>;IFN STANSW
CALL SETTUM ; Set TCP's usermode map
MOVE T1,PKTPTR ; Source byte pointer
LOAD T2,BPTR,(BFR) ; Destination byte pointer
MOVE T3,XFRCNT ; Number to do
SETZ T4, ; Monitor-to-user transfer
CALL XFRDAT ; Do the data transfer
STOR T2,BPTR,(BFR) ; Store back updated pointers
MOVEM T1,PKTPTR
LOAD T1,BCNT,(BFR) ; Get number of holes in buffer at start
SUB T1,XFRCNT ; Reduce by number transferred
STOR T1,BCNT,(BFR) ; Update the count in the buffer
LOAD T3,TRBS,(TCB) ; Get receive bufferspace (due to RECVs)
SUB T3,XFRCNT ; Remove space just filled from window
STOR T3,TRBS,(TCB)
CALL USTTUM
PRCDAX: RESTORE
RET
;NUWNDO
;Update Receive Window.
; Whenever a user RECV increases the available buffer space or
; after processing a packet entirely the size of the window being
; sent to the remote TCP is determined and set into the TCB. If
; processing the packet has moved Received Left, the Packetizer is
; signaled so it will generate an ACK.
;TCB/ (Extended) Locked Connection block
; CALL NUWNDO
;Ret+1: always
NUWNDO::
LOAD T1,TRBS,(TCB) ; Currently available buffer space
JE TTVT,(TCB),NUWND1 ; If a TVT
SETZ T1, ; Assume no space
LOAD T2,TVTL,(TCB) ; Unless a line
JUMPE T2,NUWND1 ; Has been assigned
CALL STADYN ; Get line's data block
JRST NUWND1 ; ?? address
IFE REL6,<CALL TVTISP> ; Get space in input buffer
IFN REL6,<CALLX (MSEC1,TVTISP)> ; Get space in input buffer
NUWND1:
; Now have available input space, maybe zero
LOAD T2,TRLWN,(TCB) ; Seq # of last receive-right reported
JUMPL T2,NUWND5 ; Not yet available, use actual space
LOAD T3,TRLFT,(TCB) ; Compute unused space from last window
SUB T2,T3
MODSEQ T2
CAIL T2,<.RTJST(-1,PIPL)> ;CAML T2,[MAXSEQ/2] ; Beware negative
SETZ T2, ; Window (transmitter sent too much)
JUMPLE T1,NUWND4 ; No space, don't increase offered window
; (but don't shrink it either)
IFN STANSW,<;;; be more optimistic, esp for JFN connections...
SETZ T3,
IFQN. TDEC,(TCB)
LOAD T3,TSMXP,(TCB) ; Estimated packet size
SUBI T3,MINIHS+MINTHS ; w/o minimal headers
IMUL T3,INTNFI ; times total number of free input buffers
IDIV T3,TCBCNT ; divide by current number of connections
ENDIF.
>;IFN STANSW
MOVE T4,INTXPB ; Estimated packet size
SUBI T4,MINIHS+MINTHS ; w/o minimal headers
; LSH T4,1 ; How optimistic are we??
IFN STANSW,<;;; more of optimistic code
CAIG T4,(T3) ;which method is more optimistic?
MOVE T4,T3
>;IFN STANSW
CAIG T1,(T4) ; If user space is less
MOVE T1,T4 ; Be optimistic
CAILE T1,<.RTJST(-1,PWNDO)> ; But not more so than
MOVEI T1,<.RTJST(-1,PWNDO)> ; Size of window field
MOVE T3,T2 ; Remaining space, last window
LSH T3,1 ; Factor is 1/2
CAMLE T3,T1 ; If remaining .gt. 1/2 actual
NUWND4: MOVE T1,T2 ; Don't report it (no silly windows)
NUWND5: STOR T1,TRWND,(TCB) ; Offered window space
; Check if sender should be notified of ACKed data or new window info
LOAD T3,TRSYN,(TCB) ; Check connection state
LOAD T4,TSSYN,(TCB)
CAIE T4,SYNABL ; If send side doesn't have a seq #
CAIN T3,SYNABL ; or don't know foreign address
RET ; Cannot send a packet
LOAD T4,TRLFT,(TCB) ; Current ACK point
LOAD T3,TRLAK,(TCB) ; Last reported ACK point
SUB T2,T1 ; Non-zero if new window info
MOVX T1,^D250 ; Estimated time too long, get RXs
IFE STANSW,<
CAMN T3,T4 ; If new ACK point or
SKIPE T2 ; New window space
CALL ENCPKT ; Get a packet sent in a bit
>;IFE STANSW
IFN STANSW,<
IFN. T2 ;is there new window info?
CAME T3,T4 ; AND a new ACK point
JRST FRCPKT ; then force an ACK NOW.
JRST ENCPKT ;if only new window, Encorage packet.
ELSE. ;if no new window
CAME T3,T4 ; but there is a new ACK point
JRST ENCPKT ; then encorage an ACK
ENDIF.
;Note that we dont use TINTR any more. Sigh. It seemed like a good idea.
; LOAD T3,TINTR,(TCB) ;get "inverse interactiveness" count.
; CAIGE T3,<TINTHR-1> ;is connection one way?
>;IFN STANSW
RET
;FLSRBF
;Flush Receive Buffers.
; Called when aborting a connection
;TCB/ (Extended) Locked connection block
;T1/ Code (377B7) to be left in the buffer header for user to see
; XLP+12. EFP+7. ELP+7. ELP+14. E?T+? (TVTs)
; CALL FLSRBF
;Ret+1: always
FLSRBF: SAVEAC <BFR>
LOCAL <CODE>
MOVEM T1,CODE
LOAD BFR,TRCB,(TCB) ; Get the current receive buffer if any
SETZRO TRCB,(TCB) ; Forget there is one
JUMPE BFR,FLSRB2 ; Jump if no current buffer
SETSEC BFR,INTSEC ; Make extended address
FLSRB1: MOVE T1,CODE
LSH T1,^D<36-8> ; Put into postion
CALL USRBFF ; Indicate user buffer "filled"
FLSRB2: LOAD BFR,QNEXT,<+TCBRBQ(TCB)> ; First thing on queue
CAIN BFR,TCBRBQ(TCB) ; If that is the head, queue now empty
JRST FLSRB3
SETSEC BFR,INTSEC ; Make extended address
MOVE T1,BFR
CALL DQ ; Dequeue the buffer
JRST FLSRB1
FLSRB3: RESTORE
RET
;FLSRBX
;Flush Receive Buffers for the current fork.
; Called when killing a fork
;TCB/ (Extended) Locked connection block
; CALL FLSRBX
;Ret+1: always
FLSRBX:: ;FLUSH RECEIVE BUFFERS FOR CURRENT FORK
JN TDEC,(TCB),R ;DO NOT DO THIS FOR DEC TCBS
SAVEAC <BFR,Q1> ;DO NOT TRASH THIS AC
STKVAR <FLSRBQ>
LOAD BFR,TRCB,(TCB) ;GET THE CURRENT RECEIVE BUFFER IF ANY
JUMPE BFR,FLRBX2 ;JUMP IF NO CURRENT BUFFER
SETSEC BFR,INTSEC ;MAKE EXTENDED ADDRESS
LOAD T1,BFRKX,(BFR) ;GET THE FORK THAT OWNS THIS BUFFER
CAME T1,FORKX ;IS IT US?
JRST FLRBX2 ;NO SO DO NOT PLAY WITH IT
SETZRO TRCB,(TCB) ;FORGET THE CURRENT BUFFER
CALL USRBFF ;INDICATE CURRENT BUFFER FILLED
FLRBX2: ;HERE TO SETUP FOR TRIP THROUGH BUFFER CHAIN
LOAD BFR,QNEXT,<+TCBRBQ(TCB)> ;GET THE FIRST THING ON THE QUEUE
FLRBX3: ;HERE TO LOOP THROUGH BUFFERS FOR THE TCB
CAIN BFR,TCBRBQ(TCB) ;IF THAT IS THE HEAD, QUEUE NOW EMPTY
RET ;ALL DONE SO RETURN
SETSEC BFR,INTSEC ;MAKE EXTENDED ADDRESS
LOAD T1,QNEXT,(BFR) ;GET ADDRESS OF THE NEXT BUFFER IN CHAIN
MOVEM T1,FLSRBQ ;SAVE THE NEXT BUFFER ADDRESS
LOAD T1,BFRKX,(BFR) ;GET THE FORK THAT OWNS THIS BUFFER
CAME T1,FORKX ;IS IT US?
JRST FLRBX4 ;NO
MOVE T1,BFR ;YES SO GET THE BUFFER ADDRESS
CALL DQ ;DEQUEUE THE BUFFER
CALL USRBFF ;INDICATE THE BUFFER IS FILLED
FLRBX4: ;HERE TO CONTINUE THROUGH THE BUFFER CHAIN
MOVE BFR,FLSRBQ ;GET THE NEXT BUFFER TO LOOK AT
JRST FLRBX3 ;AND GO CHECK IT OUT
;RAINI
;Initialize RA process block.
; CALL RAINI
;Ret+1: Always, T1 zero if error
RAINI: LOCAL <PRC>
MOVEI PRC,RA ; Pointer to the Process block for RA
MOVX T1,QSZ ; Size of a queue head
CALL GETBLK ; Head must be in same section as items
JUMPE T1,RAINIX ; No room
MOVEM T1,PRCQ(PRC) ; Input queue
CALL INITQ ; Initialize it
XMOVEI T1,PRCLCK(PRC) ; Lock
CALL CLRLCK ; Initilize it
XMOVEI T1,REASEM ; The Reassembler function
MOVEM T1,PRCROU(PRC) ; Routine address
SETOM PRCWAK(PRC) ; No run time yet
MOVE T1,[<GIW TCBQRA,TCB>]; Offset of RA queue in TCB
MOVEM T1,PRCQOF(PRC) ; Store process block
MOVE T1,[<GIW TCBTRA,TCB>]; Offset of RA run time in TCB
MOVEM T1,PRCWOF(PRC) ; Store in process block
HRLOI T1,377777 ; Infinity
MOVEM T1,PRCSGT(PRC) ; Set time of most recent signal
MOVEI T1,RARNCT ; Pointer to run counter
MOVEM T1,PRCRNC(PRC) ; Put in standard place
MOVEI T1,RAUSE ; Pointer to CPU use meter
MOVEM T1,PRCTMR(PRC) ; Put in standard place
RAINIX: RESTORE
RET
SUBTTL TCP Packetizer
IFE REL6,<SWAPCD>
IFN REL6,<XSWAPCD>
COMMENT !
The PACKETIZER is called with TCB setup to point at a (locked)
connection block. It attempts to form packets from data in any
buffers which are queued from the user SENDs. If the "force packet"
bit is on, the PACKETIZER will always generate a packet containing an
ACK, even if there is no data to be sent. Packetizing continues until
no more is available from user buffers or until the send window has
been filled.
In the case of virtual terminals (TVTs) output is stored in TTY
buffers and TVTNOF is set to cause a scan by OPSCAN which forces a
packet on TCBs which are TVTs. PZ runs with BFR set to 0 and BFRCNT
set to infinity in this case since it is not known how much output is
waiting to go and since the buffers are non-standard format.
!
;PKTIZE
;TCP Packetizer.
;TCB/ (Extended) Pointer to connection block
; CALL PKTIZE
;Ret+1: Always
PKTIZE: SAVEAC <PKT,TPKT,BFR>
LOCAL <BUFCNT,XFRCNT,WNDSPC,LINBLK>
SETO LINBLK, ; Assume not TVT (abort case)
;User did an ABORT for this connection or a RESET, CLZFF, LOGOUT etc.
;If a foreign address is known and we're not NOT.NOT a "non-existant"
;TCB error is sent to it so it can know that the connection is gone
;on this end.
JE TSABT,(TCB),PKTIZ0 ; User requested ABORT?
LOAD T1,TRSYN,(TCB) ; Get state of Recv and
LOAD T2,TSSYN,(TCB) ; Send synchronization
CAIN T1,NOTSYN
CAIE T2,NOTSYN
CAIN T1,SYNABL ; If we know the foreign address,
CAIA
CALL ABTNTC ; Send a courtesy error pkt to other end
MOVX T1,ELP+^D7 ; "No such connection"
CALL ABTCON ; Set to NOTSYN, flush buffers, queues
SETZRO <TSUOP,TSFP>,(TCB) ; Fake user CLOSE, Clear Force Packet request
CALL USRABD ; Tell user that ABORT is done.
JRST PKTIZX
PKTIZ0:
; If packet is being encouraged, set Force packet bit to get it done.
JE TSEP,(TCB),PKTZ00
SETONE TSFP,(TCB)
PKTZ00:
; If a SYN is sent when the connection is first used,
; it should have a sequence number gotten from the "Initial
; Sequence Number" curve (a function of the clock).
LOAD T1,TSSYN,(TCB) ; Get send state
CAIN T1,SYNABL ; SYNCABLE?
CALL SETISN ; Yes. Set initial sequence number
; If this is a TVT, TSFP will be on but there will be no buffer.
; Do the special things for this case.
JE TTVT,(TCB),PKTZ1D ; Jump if not a TVT
MOVX BFRCNT,177700 ; Maybe lots of output to handle
LOAD T2,TVTL,(TCB) ; Get the line number
JUMPE T2,PKTZ1D ; None if no TVT assigned (not synced)
CALL LCKTTY ; Lock TTY, trm blk address to T2 & NOINT
JUMPLE T2,PKTZ1C ; Can't.
MOVEM T2,LINBLK ; Save the address
CALL TTSOBE ; CFOBF might have happened since OPSCAN
JRST PKTZ1E ; Chrs available. (Zero if ^S)
MOVE T2,LINBLK ; Restore line blk address
PKTZ1C: CALL ULKTTY ; Decrease the lock count & OKINT
PKTZ1D: SETO LINBLK, ; No terminal block to unlock later
; Top of main non-TVT loop
;Try to find a user buffer to send data from. This could the the
; "send current buffer" which is left from a previous call or a
; buffer queued from user SEND. If there is no buffer, BFR is set
; to 0 as is the byte count.
PKTIZ1: LOAD BFR,TSCB,(TCB) ; Get current send buffer if any
JUMPN BFR,PKTIZ3 ; Got one. Go set count.
LOAD T1,QNEXT,<+TCBSBQ(TCB)> ; Get next thing on send buf Q
CAIN T1,TCBSBQ(TCB) ; Next points at header ...
JRST PKTZ1E ; means empty. No buffer.
SETSEC T1,INTSEC ; Make extended address
CALL DQ ; Dequeue the buffer
SKIPA BFR,T1 ; And setup the standard pointer.
PKTZ1E: MOVX BFR,0 ; 0 means no buffer
STOR BFR,TSCB,(TCB) ; Remember as current buffer
; Top of main TVT loop
; If there is a current buffer, set BUFCNT from the sum of the buffers.
; If no current buffer, try for a TVT. If neither, set BUFCNT to 0.
PKTIZ2: JUMPN BFR,PKTIZ3 ; Jump if we have a buffer
MOVX BUFCNT,0 ; Count if not a TVT
JUMPL LINBLK,PKTIZ4 ; Jump if not TVT, or TVT w/ empty output buf
MOVE T2,LINBLK ; Arg for TVTOSP
IFE REL6,<CALL TVTOSP> ; Find out if anything waiting to go
IFN REL6,<CALLX (MSEC1,TVTOSP)> ; Find out if anything waiting to go
MOVE BUFCNT,T1 ; May be zero
STOR T1,TSBYT,(TCB) ; Keep TSBYT up to date too
JRST PKTIZ4
PKTIZ3: SETSEC BFR,INTSEC ; Make extended address
LOAD BUFCNT,TSBYT,(TCB) ; Get total (SEND) queued byte count
PKTIZ4:
LOAD PKT,TSCPK,(TCB) ; May have partially filled packet
; Force our idea of the availble window space to 0 if we cannot send
; data but have to generate only an ACK.
LOAD T1,TSSYN,(TCB) ; Send state
LOAD T2,TRSYN,(TCB) ; Receive state
CAIE T1,SYNABL ; If send side is SYNABL or
CAIN T2,SYNABL ; Recv side is SYNABL then
JRST PKTIZ5 ; Make useable window 0
; Compute the amount of window space available to send into as
; provided by the remote end.
LOAD T1,TSLFT,(TCB) ; Send Left
LOAD T3,TSWND,(TCB) ; Send Window offered
SKIPN T3 ; Allow sending if window is shut
MOVX T3,1 ; Need probe to sense remote window openning
LOAD T2,TSSEQ,(TCB) ; Send Sequence
IFE STANSW,<
SKIPE PKT ; or
LOAD T2,PESEQ,(PKT) ; Packet end sequence if partial packet
>;IFE STANSW
ADD T1,T3 ; Compute Send Right
SUB T1,T2 ; Minus Sequence
MODSEQ T1 ; Keep within right number of bits
CAML T1,[MAXSEQ/2] ; If window space is .lt. 0 then
JRST PKTIZ5 ; Make it zero
MOVEM T1,WNDSPC ; Amount of useable window space
LOAD T2,TSMXP,(TCB) ; Max size of a packet (incl. header)
CAML T1,T2 ; If window is as large as a packet
JRST PKTIZ6 ; Go use it
LSH T1,2 ; 4*Useable
CAML T1,T3 ; If Useable/Offered .ge. 1/4
JRST PKTIZ6 ; Use it
JUMPE BFR,PKTIZ5 ; Cannot have PUSH if no buffer
JN BEOL,(BFR),PKTIZ6 ; Use anything if PUSH
PKTIZ5: SETZ WNDSPC, ; Make useable window 0
PKTIZ6:
SKIPLE BUFCNT ; If no data or
JUMPG WNDSPC,PKTIZ7 ; No useable window
JE TSFP,(TCB),PKTIZX ; Give up unless Force Pkt on.
PKTIZ7:
; Now the number of bytes available from the user buffer(s) is
; known and the apparent amount of useable window space is known.
; Set XFRCNT to the (maximum) amount which can actually be sent in this
; Pkt. In the case of a TVT, it is not known how much is available
; and we will assume a full packet (or window, etc) is to be sent.
IFN STANSW,<
COMMENT |
Problem: Large data transfers to some hosts don't work.
Diagnosis: At some point in the transfer, the packetizer (PZ) emptied the
last (currently) available user buffer, which partially filled a packet.
Say that the data in this packet consumes 80% of the advertised send window.
In the absence of a push, the packet was held pending more user data. When
the next user buffer is presented, the PZ tries to resume filling the
current packet. Just before PKTIZ5 (in TCPTCP.MAC), the PZ calculates how
much available window space it has. Since, after taking into account the
data already in the current packet, only 20% of the window is usable, the
silly-window avoidance code holds everything pending a window update or a
push. Since neither of these happens, things hang until the somebody times out.
Cure: The PZ should not include data in the current packet in its silly
window calculations. It does need to account for this data immediately
after that calculation, to prevent overflowing the send window.
|
IFN. PKT ; Have partially filled pkt?
LOAD T2,PESEQ,(PKT) ; Yes, get end seq
LOAD T1,TSSEQ,(TCB) ; and send seq
SUB T2,T1 ; Difference is number bytes in pkt
MODSEQ T2 ; Possible wrap
SUB WNDSPC,T2 ; WNDSPC = #bytes can still put in pkt
CAIGE WNDSPC,0
MOVEI WNDSPC,0
ENDIF. ;
>;IFN STANSW
CAML BUFCNT,WNDSPC ; Take min of what is available to be
SKIPA XFRCNT,WNDSPC ; sent and space allowed to send in
MOVE XFRCNT,BUFCNT
CAMLE XFRCNT,INTXPB ; Limit (roughly) to what a
MOVE XFRCNT,INTXPB ; Pkt can hold.
; See if have a current packet to continue filling
LOAD PKT,TSCPK,(TCB) ; Partially filled packet?
JUMPE PKT,PKTZ10 ; No
XMOVEI TPKT,PKTELI(PKT) ; Locate TCP header
LOAD T1,PIDO,(PKT)
ADD TPKT,T1
LOAD T1,PTCKS,(TPKT) ; Total max packet size
LOAD T2,PIPL,(PKT) ; Current length
SUB T1,T2 ; Unused data space in pkt (NB in T1)
JRST PKTZ12
PKTZ10:
; Try to assign a block of free storage for the packet to be sent.
LOAD T1,TSMXP,(TCB) ; Get a big packet
SETZ T2, ; Have a TCB
CALL TCPIPK ; Get packet & fill in headers
JRST [MOVX T1,^D2000 ; Two seconds later,
CALL ENCPKT ; Try again.
INCR TCTBS,(TCB) ; Count them
JRST PKTIZX]
LOAD T2,PIPL,(PKT) ; Length of headers
ADD T2,T1 ; Max IP+TCP+Data length
STOR T2,PTCKS,(TPKT) ; Save it in case continue filling later
PUSH P,T1 ; T1 is max packet data count
; Enter the send sequence for the connection as the sequence number
; of the packet.
LOAD T1,TSSEQ,(TCB) ; Current send sequence
STOR T1,PSEQ,(TPKT) ; Packet sequence number
; Send a SYN if connection is opening
LOAD T1,TSSYN,(TCB) ; Get send state
CAIN T1,SYNABL ; SYNCHABLE means we must tell other
CALL SNDSYN ; end our seq. num. by sending a SYN
; PSYN to 1 & TSSYN to SYNSNT
POP P,T1 ; Max # data octets
; Transfer data from the user buffer (if any) to the packet. XFRCNT
; has the maximum number of bytes, which may be 0. T1 has unused bytes
; in packet. Find how much can really be sent, given options & header
PKTZ12: CAMLE XFRCNT,T1 ; Min against available data
MOVEI XFRCNT,(T1) ; Cannot send all the data in pkt
MOVE T1,XFRCNT ; # of octets for SNDxxx
; Call appropriate data transfer routine
JUMPE BFR,PKTZ14 ; Jump if no buffer from user SEND (or a TVT)
CALL SNDDAT ; Transfer it from user buffer to Pkt
JRST PKTZ15 ; Note that SNDDAT set timestamp
PKTZ14:
SKIPGE T2,LINBLK ; Do we have a terminal block?
JRST PKZ14A ; No.
IFE REL6,<CALL SNDTVT> ; Send data from a virtual terminal
IFN REL6,<CALLX (MSEC1,SNDTVT)> ; Send data from a virtual terminal
SETONE PEOL,(TPKT) ; Hussle up receiver
PKZ14A:
MOVE T2,TODCLK ; Current millisecond
STOR T2,PTS,(PKT) ; Set the Packet timestamp
PKTZ15: MOVEM T1,XFRCNT ; Save number actually sent
LOAD T1,PIPL,(PKT) ; Get packet length (b) witout data
ADD T1,XFRCNT ; Add amount just inserted
STOR T1,PIPL,(PKT) ; Set into Internet Packet Length
LOAD T1,TSBYT,(TCB) ; Reduce queued count too
SUB T1,XFRCNT
STOR T1,TSBYT,(TCB)
; Send a FIN if it is time. User must have said CLOSE (TSUOP
; bit is off), SEND connection must be synchronized, and there must be
; nothing waiting to be sent (no current send buffer and nothing Q'd)
LOAD T1,TSSYN,(TCB) ; Get send state
CAIE T1,SYNCED ; Connection synchronized?
JRST PKTZ16 ; No. No FIN can be sent.
JN TSUOP,(TCB),PKTZ16 ; Jump if connection still OPEN by user
JN TSCB,(TCB),PKTZ16 ; Still something to send. No FIN yet.
LOAD T1,QNEXT,<+TCBSBQ(TCB)> ; Get first thing on send bfr q
CAIN T1,TCBSBQ(TCB) ; Is the queue empty?
CALL SNDFIN ; Include a FIN in this packet
PKTZ16: ; PFIN is 1, TSSYN=FINSNT, DG scheduled
; if R=NOTSYN
; Now all control and data have been stored in the packet.
CALL PKTEND ; Returns next seq num after this Pkt
STOR T1,PESEQ,(PKT) ; Save computed end of packet
; If we are ACKing a remote FIN, the receive side becomes NOTSYNCHED.
; If that makes both sides NOTSYNCHED, the user is notified that the
; connection is fully closed. If just the receive side closed, the
; user is told that the connection is closing. If all that remains
; to happen on the connection is that this end should receive an ACK
; of our FIN, Background is notified to generate a fake ACK after a
; reasonable time; this guards against the network losing the final ACK.
LOAD T1,TRSYN,(TCB) ; Get receive state
CAIE T1,FINRCV ; FINRECEIVED?
JRST PKTZ19 ; No. Skip the checks.
MOVX T1,NOTSYN
STOR T1,TRSYN,(TCB) ; Change to NOTSYNCHED
MOVX T1,XLP+^D12 ; "Closing" code (Why not XFP+^D12??)
CALL FLSRBF ; Flush receive buffers with this code
LOAD T2,TSSYN,(TCB) ; Get send state
CAIE T2,FINSNT ; Sending a FIN now?
JRST PKTZ17 ; No
XMOVEI T1,DY ; Who to signal
MOVE T2,TCPDGT ; When to signal
CALL SIGNAL
JRST PKTZ20 ; Force this packet out
PKTZ17:
MOVX T1,XFP+^D12 ; Assume "Closing"
CAIN T2,NOTSYN ; Send side already closed?
MOVX T1,XLP+^D3 ; Yes, "Closed" event
CALL USREVT ; Tell user
PKTZ19:
; Decide whether to wait for more data or send what packet now holds
IFE STANSW,<
JN TSFP,(TCB),PKTZ20 ; Send it if Force Packet is on
>;IFE STANSW
IFN STANSW,<
JN <TSFP,TSTVO>,(TCB),PKTZ20 ; Send if Force Packet is on or if TVT
>;IFN STANSW
JN <PSYN,PEOL,PFIN>,(TPKT),PKTZ20 ; or packet contains control
LOAD T1,PIPL,(PKT) ; or if packet is full
LOAD T2,PTCKS,(TPKT)
CAMGE XFRCNT,WNDSPC ; Transfer count fill window?
CAMN T1,T2
JRST PKTZ20 ; Full, send it
STOR PKT,TSCPK,(TCB) ; Packet to be held
SETZRO <TSFP,TSEP>,(TCB) ; Clear signals
JRST PKTIZX
; Packet will be sent now, finish it off
PKTZ20: SETZRO TSCPK,(TCB) ; No saved packet
IFE STANSW,<
SETZRO <TSFP,TSEP>,(TCB) ; Clear signals
>;IFE STANSW
IFN STANSW,<;;;
SETZRO <TSFP,TSEP,TSTVO>,(TCB) ; Clear signals
>;IFN STANSW
; Now all control and data have been stored in the packet. Advance
; the send sequence in the TCB to include all of this packet.
CALL PKTEND ; Returns next seq num after this Pkt
STOR T1,TSSEQ,(TCB) ; Advance Send sequence
STOR T1,PESEQ,(PKT) ; Save recomputed end of packet
JE PSYN,(TPKT),PKZ201 ; Jump if not first packet on this conn
LOAD T2,TSLFT,(TCB) ; Get send left
SUB T1,T2 ; Compute amount of window taken by this
MODSEQ T1 ; first Pkt.
STOR T1,TSWND,(TCB) ; And prevent further sends until window
PKZ201: ; info arrives from other end.
CALL NULPKT ; See if anything retransmittable here
SETCA T1, ; Get sense right
STOR T1,PPROG,(PKT) ; Say program must retain the packet
IFN STANSW,<;;;we are about to send a packet containing "real" data?
IFN. T1 ;if packet contains real data
; SETZRO TINTR,(TCB) ;reset the "interactiveness" packet count
CALL SETRXP ;minor fix: dont set rx parms if we never use.
ENDIF.
>;IFN STANSW
IFE STANSW,<
CALL SETRXP ; Setup packet rexmit parameters
>;IFE STANSW
; Set the timegenerated word in the local header. Used to compute
; roundtrip time for determining what the retransmit interval will be.
MOVE T1,TODCLK ; Current millisecond
STOR T1,PTG,(PKT) ; Packet Time Generated
; Done filling the packet. If running in secure mode and this
; packet has something which will be acknowledged, make the
; current level be the next level so as to shut off subsequent
; connection change request options to the KDC.
SKIPN INTSCR ; In secure mode?
JRST PKTZ21 ; No. Avoid the overhead.
JE PPROG,(PKT),PKTZ21 ; See if pkt will be ACK'd
LOAD T2,TSLVN,(TCB) ; Guaranteed that KDC will here the word
STOR T3,TSLVC,(TCB) ; So update the current level
PKTZ21:
LOAD T1,PPROG,(PKT) ; Save flag for later test
PUSH P,T1 ; PKT may vanish if error in EMTPKT (SNDGAT)
AOS PZPKCT ; Count Packetizer packets
MOVX T1,PT%XX1 ; "Being output"
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes
MOVX T1,PT%TPZ
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes
; Do statistics functions
IFN IPPDSW,<
SKIPN STATF ; Taking statistics right now?
JRST PKTZ22 ; No
MOVEI T1,OPDLAY ; Histogram time to (null) Output Proc.
CALL TSTAMP ; Process the time stamp
MOVEI T1,OPUSE ; Charge time to Output Processor
XMOVEI T2,EMTPKT ; for call to EmitPacket
MOVE T3,LINBLK ; TVT block if any
CALL TIMCAL ; Do a timed call.
JRST PKTZ23 ; Skip non-statistics code
> ; end of IFN IPPDSW
IFN STANSW,<
MOVEI T1,OPUSE ; Charge time to Output Processor
XMOVEI T2,EMTPKT ; for call to EmitPacket
MOVE T3,LINBLK ; TVT block if any
CALL TIMCAL ; Do a timed call.
JRST PKTZ23 ; Skip non-statistics code
>;IFN STANSW
PKTZ22: MOVE T1,LINBLK ; TVT block if any
CALL EMTPKT ; EmitPacket
PKTZ23:
POP P,T1 ; Saved PPROG tells if PKT needed RX
JUMPE T1,PKZ23A ; Not needed (maybe its been sent & freed)
SKIPN T1,PKT ; What to Enqueue (if there wasn't an error)
JRST PKZ23A ; Error in EMTPKT/SNDGAT
XMOVEI T2,TCBRXQ(TCB) ; Pointer to the retransmit queue
CALL NQ ; Enqueue it there
XMOVEI T1,RX ; Select the Retransmitter
LOAD T2,PRXI,(PKT) ; Retransmission interval
MOVE T4,T2
ADD T4,TODCLK ; Time of next run
SKIPE TCBQRX(TCB) ; Not queued, or ...
CAMG T4,TCBTRX(TCB) ; Need it sooner than scheduled?
CALL SIGNAL ; Cause RX to run after that time
PKZ23A:
LOAD T1,TSSYN,(TCB) ;GET THE SEND STATE
CAIE T1,SYNCED ;SYNCHRONIZED?
JRST PKZ24B ;NO SO NO FIN COULD BE SENT
JN TSUOP,(TCB),PKZ24B ;CONNECTION STILL OPEN (ACCORDING TO USER)?
MOVE T1,TVTWTM ;No so wait for window to open but
CALL DLAYPZ ;check back in case other TCP loses
PKZ24B: ;HERE WHEN NO FIN TO BE SENT
; See if Packetizer should run again for this connection. This is true
; if there is something waiting to be sent and there is window space
; in which to send it.
; TVT checks
JE TTVT,(TCB),PKTZ24 ; Jump if not a virtual terminal
SETZ T1, ; Assume LINBLK is -1
SKIPLE T2,LINBLK ; Pointer to dynamic area
IFE REL6,<CALL TVTOSP> ; Get amount of output waiting
IFN REL6,<CALLX (MSEC1,TVTOSP)>
STOR T1,TSBYT,(TCB)
JUMPE T1,PKTIZX ; None right now.
CAMLE WNDSPC,XFRCNT ; If there is still unused window space
JRST PKTIZ2 ; Go try for it
MOVE T1,TVTWTM ; After this number of milliseconds
CALL DLAYPZ ; Try again
JRST PKTIZX
PKTZ24:
; Non-TVT checks
JN TSCB,(TCB),PKTZ25 ; Jump if there is a current buffer
LOAD T1,QNEXT,<+TCBSBQ(TCB)> ; Send buffer queue
CAIN T1,TCBSBQ(TCB) ; Empty?
JRST PKTIZX ; Yes. Nothing to send. Return.
PKTZ25:
CAMLE WNDSPC,XFRCNT ; Is there some unused window space?
JRST PKTIZ1 ; Yes. Use it.
; Return from the Packetizer
PKTIZX:
LOAD T1,TSSYN,(TCB) ; Get send state
CAIE T1,SYNCED ; Connection synchronized?
IFSKP. ; (FIN can't be sent if not)
ANDQE. TSUOP,(TCB) ; Yes, jump if connection still OPEN by user
MOVE T1,TVTWTM ; Try to send FIN later, we must have been
CALL DLAYPZ ; unable to send it this time through
ENDIF. ; (ie, due to presence of q'd snd data)
SKIPL T2,LINBLK ; Have a TVT line locked?
CALL ULKTTY ; Yes. Unlock it.
RESTORE ; POP all locals
RET
;SETISN
;Set Initial Sequence Number for a connection.
;SETIS1
;Sets default initial send window.
;TCB/ (Extended) Locked connection block
; CALL SETISN
;Ret+1: always
SETISN: JN TSSV,(TCB),SETIS1 ; Jump if the current sequence is valid
CALL GETISN ; Get current value of ISN curve
STOR T1,TSSEQ,(TCB) ; Store as current send sequence
SETONE TSSV,(TCB) ; Indicate sequence is now valid
SETIS1:
LOAD T1,TSSEQ,(TCB)
STOR T1,TSLFT,(TCB) ; Move Send Left up to Sequence
RET ; Wait for window
;SNDSYN
;Include a SYN bit in the packet.
;TCB/ (Extended) Current locked connection block
;PKT/ (Extended) Packet
;TPKT/ (Extended) pointer to TCP part of packet
; CALL SNDSYN
;Ret+1: always
SNDSYN: SETONE PSYN,(TPKT) ; Set the SYN bit in the packet
LOAD T1,TSSYN,(TCB) ; Get send state
CAIE T1,SYNABLE ; SYNCABLE (ie, opening)
JRST SNDSY1 ; No.
MOVX T2,SYNSNT
STOR T2,TSSYN,(TCB) ; Yes. Change to SYNSENT state.
SNDSY1: AOS SYNSCT ; Count SYNs sent
IFN STANSW,<;;; insert a maximum segment size option
CALL SNDMSL
>;IFN STANSW
RET
IFN STANSW,<;;;
IF2 <PRINTX Dangerous assumptions being made at SNDMSL.>
SNDMSL: SAVEAC P1
LOAD T1,TLH,(TCB) ; Foreigner's name for us
CALL FNDNCT ; Put address of interface in T2
RET ;Not found
IFE NICSW,<
SKIPGE T1,NTPSIZ(P1) ; Get max size for that (interface) net
>
IFN NICSW,<
SKIPG T1,NTPSIZ(P1) ; Get max size for that (interface) net
>
RET ; none or 0, use normal packet length
CAMLE T1,TCPBYS ; User want bigger than we support?
MOVE T1,TCPBYS ; Yes, Clamp to our max
SUBI T1,MINIHS+MINTHS ;dont include heaaders
LSH T1,4
TXO T1,<byte(8) MSLOPT,MSLLEN,0,0> ;make into a tcp option
LOAD T2,PIPL,(PKT) ;get current packet length
ADDI T2,4
STOR T2,PIPL,(PKT) ;save new length
IDIVI T2,4
JUMPN T3,R ;not even word, can't insert option
MOVEI T3,PKTELI-1(T2) ;word offset (not including 4 bytes just added)
ADD T3,PKT ;from beginning of packet
MOVEM T1,(T3) ;add in a word
LOAD T2,PTDO,(TPKT) ;get tcp data offset
ADDI T2,1
STOR T2,PTDO,(TPKT) ;and save that too.
RET ;;; Note, this lessens the data space available, but it
;;; Doesn't matter because a SYN wont contain anay data.
>;IFN STANSW
;SNDDAT
;Move data from user buffer(s) to a (partially filled) packet.
; All OPTIONS must be in the Packet at the time this is called.
;TCB/ (Extended) Locked connection block
;PKT/ (Extended) Packet
;TPKT/ (Extended) pointer to TCP part of packet
;BFR/ (Extended) Buffer header address (of first buffer)
;T1/ Number of bytes to move (maybe 0).
; CALL SNDDAT
;Ret+1: Always. T1 has number actually transferred
SNDDAT: LOCAL <CPYCNT,XFRCNT,PKTPTR>
MOVEM T1,XFRCNT ; Set up the transfer count
SETZ CPYCNT,
LOAD T1,PIPL,(PKT) ; Packet length
IDIVI T1,4 ; Divided into
MOVEI PKTPTR,PKTELI(T1) ; Word offset and byte
HLL PKTPTR,[ POINT 8,.-.(PKT)
POINT 8,.-.(PKT),7
POINT 8,.-.(PKT),15
POINT 8,.-.(PKT),23](T2)
SKIPN STATF ; Taking statistics now?
JRST SNDDA0 ; No
IFN IPPDSW,<
LOAD T1,BTS,(BFR) ; Get the buffer time stamp
STOR T1,PTS,(PKT) ; and make that the Packet time stamp
> ; end of IFN IPPDSW
SNDDA0:
; Top of per-user buffer loop
SNDDA1:
IFN STANSW,<
JE TDEC,(TCB),SNDDA2
NOSKED ;???
LOAD T4,BCNT,(BFR) ; Available bytes in user buffer
MOVE T3,T4
CAILE T3,(XFRCNT) ; Min'ed with remaining space in packet
MOVE T3,XFRCNT
SUB XFRCNT,T3 ; Bytes to transfer from next buffer
SUB T4,T3 ; Bytes remaining in user buffer
STOR T4,BCNT,(BFR)
ADDM T3,CPYCNT ; Total bytes transferred so far
LOAD T1,BPTR,(BFR) ; Source is buffer ptr (mapped into mon)
MOVE T2,PKTPTR ; Destination is packet pointer
MOVEI T4,1 ; Indicate monitor-to-monitor
CALL XFRDAT ; Do the data transfer
MOVEM T2,PKTPTR ; Store updated infomation
STOR T1,BPTR,(BFR)
OKSKED
JRST SNDDA3
SNDDA2:
>;IFN STANSW
CALL SETTUM ; Set user map
LOAD T4,BCNT,(BFR) ; Available bytes in user buffer
MOVE T3,T4
CAILE T3,(XFRCNT) ; Min'ed with remaining space in packet
MOVE T3,XFRCNT
SUB XFRCNT,T3 ; Bytes to transfer from next buffer
SUB T4,T3 ; Bytes remaining in user buffer
STOR T4,BCNT,(BFR)
ADDM T3,CPYCNT ; Total bytes transferred so far
LOAD T1,BPTR,(BFR) ; Source is buffer ptr (mapped into mon)
MOVE T2,PKTPTR ; Destination is packet pointer
SETO T4, ; Indicate User-to-monitor
CALL XFRDAT ; Do the data transfer
MOVEM T2,PKTPTR ; Store updated infomation
STOR T1,BPTR,(BFR)
CALL USTTUM ; Unmap user space
; Stop if more remains in user buffer (should have reached end of count
IFN STANSW,< SNDDA3: >
JN BCNT,(BFR),SNDDAX ; More remains in buffer, wait for next pkt
; Finished with this buffer, transfer PUSH if present
SETZRO TSCB,(TCB) ; Done with this buffer
JE BEOL,(BFR),SNDDA5 ; Jump if no PUSH in the buffer
SETONE PEOL,(TPKT) ; Set packet PUSH
SNDDA5:
MOVX T1,<<OK>B7> ; The general success event code
CALL USRBFE ; Tell user his send buffer is empty
MOVX T1,PT%TBD
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes
; Stop if transferred full count
JUMPLE XFRCNT,SNDDAX ; Pkt filled so quit
; Setup for next user buffer
LOAD T1,QNEXT,<+TCBSBQ(TCB)> ; Get next thing on send buf Q
CAIN T1,TCBSBQ(TCB) ; Next points at header ...
JRST SNDDAX ; means empty. Something is wrong...stop
SETSEC T1,INTSEC ; Make extended address
CALL DQ ; Dequeue the buffer
MOVE BFR,T1 ; And setup the standard pointer.
STOR BFR,TSCB,(TCB) ; Remember as current buffer
JRST SNDDA1 ; Go to work on this buffer
SNDDAX: ADDM CPYCNT,BYTSCT ; Count Bytes Sent
MOVE T1,CPYCNT ; Return bytes actually transferred
RESTORE
RET
;SNDFIN
;Send a FIN in this packet.
;TCB/ (Extended) Locked connection block
;PKT/ (Extended) Packet
;TPKT/ (Extended) pointer to TCP part of packet
; CALL SNDFIN
;Ret+1: always
SNDFIN: SETONE PFIN,(TPKT) ; Set FIN bit in the packet
MOVX T1,FINSNT ; New send state
STOR T1,TSSYN,(TCB) ; Set it.
LOAD T1,TRSYN,(TCB) ; Get receive state
CAIE T1,NOTSYN ; NOTSYNCHED?
JRST SNDFI1 ; No.
XMOVEI T1,DY
MOVE T2,TCPDGT
CALL SIGNAL ; Run again in 30 seconds
SNDFI1:
AOS FINSCT ; Count FINs sent
RET
;EMTPKT
;Emit a packet into a network.
;TCB/ (Extended) Locked connection block
;PKT/ (Extended) Packet, NB: It may be invalid on return from SNDGAT
;TPKT/ (Extended) pointer to TCP part of packet
;T1/ Pointer to dynamic data if TVT w/ output data, or -1
EMTPKT: LOCAL <LINBLK>
MOVEM T1,LINBLK ; Save TTYSRV line block if any
JN PINTL,(PKT),EMTPKX ; Already in use by interrupt level
; (ReXmit while NET is off or slow)
LOAD T4,TRSYN,(TCB) ; Get receive state
CAIN T4,SYNABLE ; SYNCABLE
JRST EMTPK1 ; Yes. Cannot ACK anything.
; Insert ACK
SETONE PACK,(TPKT) ; Set the packet ACK bit
LOAD T1,TRLFT,(TCB) ; Receive Left is what we want to hear
STOR T1,PACKS,(TPKT) ; next. ACK that.
STOR T1,TRLAK,(TCB) ; Sending an ACK
; Insert receive window
CAIE T4,FINRCV ; If received FIN or
CAIN T4,NOTSYN ; already closed
JRST EMTPK0 ; Leave window zero
LOAD T1,TRWND,(TCB) ; Offered window size
STOR T1,PWNDO,(TPKT) ; into packet
JE PACK,(TPKT),EMTPK0 ; If no ACK, cannot
LOAD T2,PACKS,(TPKT) ; Receive-left
ADD T2,T1 ; Plus window
MODSEQ T2 ; is Receive-right
STOR T2,TRLWN,(TCB) ; Last offered
EMTPK0:
; Set urgent if required
JE TSURG,(TCB),EMTPK1 ; Skip following if not in urgent mode
LOAD T1,TSURP,(TCB) ; End of urgent data
LOAD T2,PSEQ,(TPKT) ; Sequence number of this packet
SUB T1,T2 ; Offset to urgent pointer
CAIG T1,<PURGP/<PURGP&<-PURGP>>> ; Limit to max
MOVX T1,<PURGP/<PURGP&<-PURGP>>>
STOR T1,PURGP,(TPKT) ; Set into packet
SETONE PURG,(TPKT) ; Set the control bit
EMTPK1:
; Insert checksum
SETZRO PTCKS,(TPKT) ; Clear the check sum field
CALL TCPCKS ; Compute the packet checksum
STOR T1,PTCKS,(TPKT) ; and enter it in the packet
; Log packet
MOVX T1,PT%XX2 ; "passing Output processor" code
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes, Tell Pkt printer
MOVX T1,PT%TRX
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes
MOVE T1,TODCLK ; Current millisecond number
STOR T1,PXT,(PKT) ; Store as time of most recent transmit
CALL SNDGAT ; Send it
AOS OPPKCT ; Count packets output
AOS OPRNCT ; and Output runs
EMTPKX: RESTORE
RET
;ABTNTC
;Send a RST to remote TCP when this end is abandonned.
; This is a courtesy which serves to speed things up but is not
; required by the protocol.
;TCB/ (Extended) Locked connection block
; CALL ABTNTC
;Ret+1: always
ABTNTC: SAVEAC <PKT,TPKT>
SETZB T1,T2 ; No data & have TCB
CALL TCPIPK ; Get packet & fill in headers
JRST ABTNTX ; No space. Not required anyway.
SETONE PRST,(TPKT) ; Set the reset bit
LOAD T1,TSSEQ,(TCB) ; Current send sequence
STOR T1,PSEQ,(TPKT) ; Is the Packet sequence
LOAD T2,TRLFT,(TCB) ; What we want to hear next (or 0)
STOR T2,PACKS,(TPKT) ; Is the acknowledge
SETONE PACK,(TPKT) ; Make the ACK Sequence meaningful
SETZRO PWNDO,(TPKT) ; 0 window to other end (TCB is dead)
SETZRO PTCKS,(TPKT)
CALL TCPCKS ; Compute TCP packet checksum
STOR T1,PTCKS,(TPKT) ; and insert into packet
MOVX T1,PT%XX2 ; Say Pkt is being sent
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes, Print the packet
MOVX T1,PT%TRX
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes
AOS PZPKCT ; Count Packetized packets
AOS OPPKCT ; Count Output packets
AOS RSTSCT ; Count ERRs sent
CALL SNDGAT ; Sent Pkt to the net. (NB: PPROG is 0)
ABTNTX: RET
;SCRCLS
;Send a "Secure Close".
; After all has been said, one more packet containing a SCLOPT must
; be sent. This will cause the BCR to contact the KDC in order
; to remove the keys, etc for the connection.
;TCB/ (Extended) Locked connection block
; CALL SCRCLS
;Ret+1: always
SCRCLS: SAVEAC <PKT,TPKT>
SETZB T1,T2 ; No data & have TCB
CALL TCPIPK ; Get packet & fill in headers
JRST SCRCLX ; No. Don't worry about it however
CALL SNDSCL ; Add in the secure close option
CALL TCPCKS ; Compute TCP packet checksum
STOR T1,PTCKS,(PKT) ; and insert into packet
MOVX T1,PT%XX2 ; Say Pkt is being sent
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes, Print the packet
MOVX T1,PT%TRX
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes
AOS PZPKCT ; Count Packetized packets
AOS OPPKCT ; Count Output packets
CALL SNDGAT ; Sent Pkt to the net. (NB: PPROG is 0)
SCRCLX: RET
;FRCPKT
;Force a packet.
; Causes a packet to be emitted even if there is no data to send.
; Done to cause something to be ACKd for instance.
;TCB/ (Extended) Locked connection block
; CALL FRCPKT
;Ret+1: always
FRCPKT::JN TSFP,(TCB),FRCPKX ; Filter extra calls
SETONE TSFP,(TCB) ; Set the Force packet request bit
$SIGNL(PZ,0) ; Make Packetizer run now
FRCPKX: RET
;ENCPKT
;Encourage generation of a packet.
; A packet is needed to ACK something, but allow time for some data
; to appear so that the ACK can piggyback on it. Also, more calls
; may be made and we wish to minimize network traffic by not
; generating an ACK-only packet each time.
;TCB/ (Extended) Locked connection block
;T1/ # msec to wait
; CALL ENCPKT
;Ret+1: always
ENCPKT::JN TSEP,(TCB),ENCPKX ; Already encouraged. No more needed.
SETONE TSEP,(TCB) ; Remember a packet is being encouraged
CALL DLAYPZ ; Get background to signal PZ(TCB)
ENCPKX: RET
;DLAYPZ
;Schedule a delayed signal for the packetizer.
;TCB/ (Extended) Locked TCB
;T1/ Delay time in milliseconds
; CALL DLAYPZ
;Ret+1: always
DLAYPZ: JN TSFP,(TCB),DLAYPX ; Already forced. No need.
MOVE T2,T1 ; Desired delay for SIGNAL
SKIPN TCBQPZ(TCB) ; Already queued?
JRST DLAYPS ; No
MOVE T1,TCBTPZ(TCB) ; When
SUB T1,TODCLK
CAMG T1,T2 ; This request sooner?
JRST DLAYPX ; No, its later so ignore it
DLAYPS: XMOVEI T1,PZ ; Select Packetizer
CALL SIGNAL
DLAYPX: RET
;FLSSBF
;Flush all SEND buffers with a given Event Code.
;TCB/ (Extended) Locked connection block
;T1/ Event Code: EFP+^D7; ELP+^D7; ELP+^D14, ELT+^D4 (no TVTs)
; CALL FLSSBF
;Ret+1: always
FLSSBF: SAVEAC <BFR>
LOCAL <CODE>
MOVEM T1,CODE
LOAD BFR,TSCB,(TCB) ; Get the current send buffer
SETZRO TSCB,(TCB) ; Forget the current send buffer
JUMPE BFR,FLSSB2 ; Do we have a buffer here?
SETSEC BFR,INTSEC ; Make extended address
FLSSB1: MOVE T1,CODE ; Yes.
LSH T1,^D<36-8> ; Position in error byte
CALL USRBFE ; Tell user it is done
FLSSB2: LOAD BFR,QNEXT,<+TCBSBQ(TCB)> ; Get next thing on buffer queue
CAIN BFR,TCBSBQ(TCB) ; Points at head of queue
JRST FLSSB3 ; means empty queue. Done.
SETSEC BFR,INTSEC ; Make extended address
MOVE T1,BFR
CALL DQ ; Dequeue the buffer
JRST FLSSB1
FLSSB3: RESTORE
RET
;FLSSBX
;Flush all SEND buffers for the current fork.
;TCB/ (Extended) Locked connection block
;Ret+1: always
FLSSBX:: ;FLUSH SEND BUFFERS FOR CURRENT FORK
JN TDEC,(TCB),R ;DO NOT DO THIS FOR DEC TCBS
SAVEAC <BFR,Q1> ;DO NOT TRASH THIS AC
STKVAR <FLSSBQ>
LOAD BFR,TSCB,(TCB) ;GET THE CURRENT SEND BUFFER IF ANY
JUMPE BFR,FLSBX2 ;JUMP IF NO CURRENT BUFFER
SETSEC BFR,INTSEC ;MAKE EXTENDED ADDRESS
LOAD T1,BFRKX,(BFR) ;GET THE FORK THAT OWNS THIS BUFFER
CAME T1,FORKX ;IS IT US?
JRST FLSBX2 ;NO SO DO NOT PLAY WITH IT
SETZRO TSCB,(TCB) ;FORGET THE CURRENT BUFFER
CALL USRBFE ;INDICATE CURRENT BUFFER EMPTY
FLSBX2: ;HERE TO SETUP FOR TRIP THROUGH BUFFER CHAIN
LOAD BFR,QNEXT,<+TCBSBQ(TCB)> ;GET THE FIRST THING ON THE QUEUE
FLSBX3: ;HERE TO LOOP THROUGH BUFFERS FOR THE TCB
CAIN BFR,TCBSBQ(TCB) ;IF THAT IS THE HEAD, QUEUE NOW EMPTY
RET ;ALL DONE SO RETURN
SETSEC BFR,INTSEC ;MAKE EXTENDED ADDRESS
LOAD T1,QNEXT,(BFR) ;GET THE NEXT BUFFER TO LOOK AT
MOVEM T1,FLSSBQ ;SAVE THE NEXT BUFFER ADDRESS
LOAD T1,BFRKX,(BFR) ;GET THE FORK THAT OWNS THIS BUFFER
CAME T1,FORKX ;IS IT US?
JRST FLSBX4 ;NO
MOVE T1,BFR ;YES SO GET THE BUFFER ADDRESS
CALL DQ ;DEQUEUE THE BUFFER
CALL USRBFE ;INDICATE THE BUFFER IS EMPTY
FLSBX4: ;HERE TO CONTINUE THROUGH THE BUFFER CHAIN
MOVE BFR,FLSSBQ ;GET THE NEXT BUFFER
JRST FLSBX3 ;AND GO CHECK IT OUT
;PZINI
;Initialize PZ process block.
; CALL PZINI
;Ret+1: ALways
PZINI: LOCAL <PRC>
MOVEI PRC,PZ ; Pointer to the Process block for PZ
MOVX T1,QSZ ; Size of a queue head
CALL GETBLK ; Head must be in same section as items
JUMPE T1,PZINIX ; No room
MOVEM T1,PRCQ(PRC) ; Input queue
CALL INITQ ; Initialize it
XMOVEI T1,PRCLCK(PRC) ; Lock
CALL CLRLCK ; Initilize it
XMOVEI T1,PKTIZE ; Packetizer function
MOVEM T1,PRCROU(PRC) ; Routine address
SETOM PRCWAK(PRC) ; No run time yet
MOVE T1,[<GIW TCBQPZ,TCB>]; Offset of PZ queue in TCB
MOVEM T1,PRCQOF(PRC) ; Store process block
MOVE T1,[<GIW TCBTPZ,TCB>]; Offset of PZ run time in TCB
MOVEM T1,PRCWOF(PRC) ; Store in process block
HRLOI T1,377777 ; Infinity
MOVEM T1,PRCSGT(PRC) ; Set time of most recent signal
MOVEI T1,PZRNCT ; Pointer to run counter
MOVEM T1,PRCRNC(PRC) ; Put in standard place
MOVEI T1,PZUSE ; Pointer to CPU use meter
MOVEM T1,PRCTMR(PRC) ; Put in standard place
HRROI T1,-1 ; All ok
PZINIX: RESTORE
RET
SUBTTL TCP Retransmitter
IFE REL6,<SWAPCD>
IFN REL6,<XSWAPCD>
COMMENT !
The Retransmitter task is call from the top level of the TCP when a
connection deadline has elapsed. The single packet at the head of the
restransmission queue is sent again and its retranmission interval
adjusted. Should the maximum persistence of some message be exceeded,
the user is notified and the connection aborted.
Two retransmission strategies are available. The old initial interval
with backoff and the "newer" dynamic method.
The "newer" method is the default; it is specified by a
"retransmission parameters word" (OPEN, SEND) of zero. It uses a
smoothed round trip time estimate based on the formula:
SRTT = SRTT(last) * alpha + RTT * (1-alpha)
and the packet retransmission interval is computed by
RXI = SRTT * beta
where SRTT is TSMRT (initial value is TCPRX0)
alpha is TCPRXS (scaled by 2**-(TCPRXF))
RTT is TODCLK(ACK)-PTG
beta is TCPRXV (scaled by 2**-(TCPRXF))
RXI is PRXI
The old method is specified if the "retransmission parameters word"
has ever been non-zero. It computes the minimum and maximum round
trip times for all packets in a TCPBG0 msec interval and then sets
the estimated retransmission time (TRXI, initial value from RX param
word, or TCPDXI if 0) to one-half second above the average estimated
round trip time. With each retransmission of a packet, the next
retransmission interval is the current value * numinator /
denominator (each from the RX param word or TCPDXN, TCPDXD).
!
;REXMIT
;Retransmit for a connection.
;TCB/ (Extended) Locked connection block. (Dequeued from RX queue)
; CALL REXMIT
;Ret+1: Always
REXMIT: SAVEAC <PKT,TPKT>
LOCAL <LINBLK,NXRXI>
XMOVEI T1,TCBRXQ(TCB) ; Pointer to the retranmit queue
LOAD PKT,QNEXT,(T1) ; Set pointer to first thing on queue
SETSEC PKT,INTSEC ; Make extended address
SETO LINBLK, ; Assume not a TVT
CAMN PKT,T1 ; If that is the head of the queue,
JRST REXMIX ; we are done.
; TVT processing
JE TTVT,(TCB),REXM1B ; Jump if not a TVT
JUMPGE LINBLK,REXM1B ; Jump if already have line locked
LOAD T2,TVTL,(TCB) ; Get the line number
JUMPLE T2,REXM1B ; TVTL may be 0 if RXing a SYN
CALL LCKTTY ; Lock and get ptr to dynamic block
JUMPLE T2,REXM1A ; Not init'd yet
MOVEM T2,LINBLK
JRST REXM1B
REXM1A: CALL ULKTTY
REXM1B:
; Common processing
LOAD T1,PIDO,(PKT) ; Internet data offset in words
XMOVEI TPKT,PKTELI(PKT) ; Pointer to Internet portion
ADD TPKT,T1 ; Pointer to TCP portion
IFN STANSW,<;;; avoid "one way gateways" hanging connections in SYN.SYN
IFQN. PSYN,(TPKT) ;retransmission contain a SYN ?
LOAD T1,PIDH,(PKT) ;get destination host
CALL HSTHSH ;get its hash index
SETO T2,
IFG. T2 ;if we know the host status
HLRZ T1,HSTSTS(T2) ;get the host status
CAIN T1,(HS%VAL!<FLD ^d13,HS%RSN>) ;unreachable ?
JRST REXMI2 ;return "rexmit timeout" error
ENDIF.
ENDIF.
>;IFN STANSW
SKIPN TCPON ; Force error if TCP is turned off
JRST REXMI2
; If this is the first retransmission of this packet, reinitialize
; the retransmission parameters (Initial interval and discard
; time). Since this is done as each packet appears at Send.Left,
; timeouts are avoided in the case where the receiver is very slow.
JN PRXD,(PKT),REXM11 ; Pkt has been RX'd at least once
LOAD T1,PSEQ,(TPKT) ; Packet sequence number
LOAD T2,TSLFT,(TCB) ; Send Left
LOAD T3,PESEQ,(PKT) ; End sequence of the Packet
CALL CHKWND ; Is Left within this Pkt?
JUMPE T1,REXMI3 ; No. Retransmit if needed.
CALL SETRXP ; Initialize the RX parameters
REXM11:
; This packet contains TSLFT or has already been retransmitted
; Check for Retransmission timeout
IFN STANSW,< ;;;dont time out connections that are waiting for a window to open
JN TSWND,(TCB),REXM12 ;is the window 0?
LOAD T1,TSTO,(TCB) ; Send time out set by user
SKIPE T1 ; Use 0 if none specified
ADD T1,TODCLK ; Else compute a new deadline
STOR T1,PDCT,(PKT) ; Set the discard time in the packet
REXM12:
>;IFN STANSW
LOAD T1,PDCT,(PKT) ; Get discard time for this pkt
JUMPE T1,REXMI3 ; Jump if no discard time specified
CAML T1,TODCLK ; Packet undeliverable?
JRST REXMI3 ; Not yet.
; A pkt has not been ACKed within the (send) timeout specified
; by the user, or TCP has been shut off (TCPON is 0)
REXMI2: MOVEI T1,ELP+^D9 ; "Retransmission timeout"
CALL USRERR ; Tell the user
MOVEI T1,ELP+^D14 ; "Connection reset"
CALL ABTCON ; Abort the connection
JRST REXMIX ; Return to caller
; See if it is time to retransmit this packet.
REXMI3: LOAD NXRXI,PRXI,(PKT) ; Get the current retransmit interval
JN PINTL,(PKT),REXMI6 ; Cannot RX if last still unsent
LOAD T1,PXT,(PKT) ; Time of last transmission
ADD NXRXI,T1 ; Plus interval is time to RX
SUB NXRXI,TODCLK ; Time before next RX
IFN STANSW,<;;; take into account signal time rounding.
CAILE NXRXI,TSCHDI ; is it about time?
>;IFN STANSW
JUMPG NXRXI,REXMI6 ; Not yet time, go reschedule
; Re-transmit the packet. Refresh IP options that might have been changed
CALL TCPIIO ; Hope user hasn't changed them
MOVE NXRXI,TCPRXW ; Time to use if zero window (note that
JE TSWND,(TCB),REXM36 ; PRXI is unchanged but won't look til later)
JE <TRXPN,TRXPD>,(TCB),REXM32 ; Use newer method
LOAD T1,PRXI,(PKT) ; Get the current retransmit interval
LOAD T2,TRXPN,(TCB) ; Numerator of backoff ratio
LOAD T3,TRXPD,(TCB) ; Denominator
IMULI T1,0(T2)
IDIVI T1,0(T3)
JRST REXM34
; Estimates based only on round trip time are essentially constant
; retransmissions, which looses if a large round trip time is usual.
REXM32: JN PRXD,(PKT),REXM33 ; Jump if multiple retransmissions
LOAD T1,TSMRT,(TCB) ; Current round trip estimate
IMUL T1,TCPRXV ; Increase by (scaled) variance
ASH T1,@TCPRXF ; Remove scale factor
JRST REXM34
; Until we have the estimate use a backoff factor of about 2.
REXM33: LOAD T2,PTG,(PKT) ; Time packet generated
MOVE T1,TODCLK ; Now
SUB T1,T2 ; Time packet has been unACKed
; Essentially doubles RX interval
REXM34:
CAMLE T1,TCPRXX ; Limit to maximum
MOVE T1,TCPRXX
STOR T1,PRXI,(PKT) ; Store back in the packet header
IFN STANSW,<;[wew] largely so SYSDPY displays actual number
STOR T1,TRXI,(TCB) ; update restranmission interval in TCB too.
CAIL T1,^D80 ;Somehow less than minimum?
IFSKP.
repeat 0,<
BUG.(CHK,UNRINT,TCPTCP,SOFT,<ReXmit: -- unreasonable interval >,<<T1,TIME>,<TCB,TCB>>,<
Cause: The calculated time interval to wait before retransmitting
the next packet was less than the minimum (TCPRXN).
>)
>;repeat 0
MOVE T1,TCPRXN ;use the minimum time instead.
ENDIF.
>;IFN STANSW
MOVEM T1,NXRXI ; Save for signal
REXM36:
; Before queueing the packet for an interface, set RXd flag
SETONE PRXD,(PKT) ; Indicate that packet has been RXd
MOVX T1,PT%XX8 ; Code for "being retransmitted"
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes, tell the packet printer
MOVE T1,LINBLK ; TVT block if any
CALL EMTPKT ; Send off the packet
REXMI5:
AOS RXPKCT ; Count retransmitted packets
IFN STANSW,<;;; Keep track of retransmissions for each connection
INCR TRCNT,(TCB)
>;IFN STANSW
; Now reschedule Retransmitter to run again when this packet should
; again be retransmitted
REXMI6: XMOVEI T1,RX ; What to signal
MOVE T2,NXRXI ; The desired interval
CALL SIGNAL ; Cause ourself to run later
REXMIX: SKIPL T2,LINBLK ; Running for a TVT?
CALL ULKTTY ; Yes. Unlock it
RESTORE
RET
;SETRXP
;Initialize retransmission parameters in a pkt.
;PKT/ (Extended) Packet pointer
;(TPKT/ (Extended) pointer to TCP part of packet)
;TCB/ (Extended) Locked connection block
; CALL SETRXP
;Ret+1: Always
SETRXP:
; Set packet discard time
; How should Source-quench & send timeout interact?
LOAD T1,TSTO,(TCB) ; Send time out set by user
SKIPE T1 ; Use 0 if none specified
ADD T1,TODCLK ; Else compute the deadline
STOR T1,PDCT,(PKT) ; Set the discard time in the packet
; Set initial retransmission interval
JE <TRXPN,TRXPD>,(TCB),SETRX4 ; Use newer method
LOAD T1,TRXI,(TCB) ; Get estimated Retrans. Interval.
SKIPG T1 ; Guard against bad extimate of rnd trip
MOVE T1,TCPDXI ; Choose default interval in that case
LOAD T2,TRXPI,(TCB) ; Get possible user setting
IMULI T2,^D1000 ; Convert to milliseconds
SKIPE T2 ; Did user set retrans parameters?
MOVE T1,T2 ; Yes. Use that initial interval
JRST SETRX6
SETRX4: LOAD T1,TSMRT,(TCB) ; Get estimated round trip time
IMUL T1,TCPRXV ; Increase by (scaled) variance
ASH T1,@TCPRXF ; Remove scale factor
SETRX6:
CAMLE T1,TCPRXX ; Keep within bounds
MOVE T1,TCPRXX
CAMGE T1,TCPRXN ; both ends.
MOVE T1,TCPRXN
SKIPE INTTRC ; Actively tracing packets?
IMULI T1,^D1 ;8 ; Slow down retransmissions
STOR T1,PRXI,(PKT) ; Set packet retrans interval
IFN STANSW,<;[wew] largely so SYSDPY displays actual number
STOR T1,TRXI,(TCB) ; update restranmission interval in TCB too.
>;IFN STANSW
RET
;RXPARS(TCB)
;Change retransmission parameters.
; Called by SEND and OPEN which allow the caller to change the
; retransmission characteristics -- Backoff rate and initial
; retransmission interval.
;TCB/ (Extended) Locked Connection Block
;T1/ Retrans. parameter word. Format is that of TRXP.
; CALL RXPARS
;Ret+1: Always.
;Note: Newly created TCBs have 0 in the TRXP word which
;means that the user has not chosen to override the use of
;measured round trip time as the way of selecting the retrans
;interval. If the user sets TRXP, those parameters are used.
RXPARS::
JUMPE T1,RXPARX ; No change wanted
LOAD T2,TRXP,(TCB) ; Current settings
CAMN T1,T2 ; Different?
JRST RXPARX ; No.
STOR T1,TRXP,(TCB) ; Put them in place for LOADs
LOAD T2,TRXPN,(TCB) ; Get numerator
LOAD T3,TRXPD,(TCB) ; and denominator of backoff fraction
LOAD T4,TRXPI,(TCB) ; Initial interval in seconds
SKIPN T2 ; Get defaults
MOVE T2,TCPDXN
SKIPN T3
MOVE T3,TCPDXD
SKIPN T4
MOVE T4,TCPDXI
CAMLE T3,T2 ; Prevent interval from decreasing
MOVE T3,T2
STOR T2,TRXPN,(TCB) ; Set it all into the TCB
STOR T3,TRXPD,(TCB)
STOR T4,TRXPI,(TCB)
RXPARX: RET
;RXINI
;Initialize RX process block.
; CALL RXINI
;Ret+1: ALways, T1 zero if error
RXINI: LOCAL <PRC>
XMOVEI PRC,RX ; Pointer to the Process block for RX
MOVX T1,QSZ ; Size of a queue head
CALL GETBLK ; Head must be in same section as items
JUMPE T1,RXINIX ; No room
MOVEM T1,PRCQ(PRC) ; Input queue
CALL INITQ ; Initialize it
XMOVEI T1,PRCLCK(PRC) ; Lock
CALL CLRLCK ; Initilize it
XMOVEI T1,REXMIT ; Retransmitter function
MOVEM T1,PRCROU(PRC) ; Routine address
SETOM PRCWAK(PRC) ; No run time yet
MOVE T1,[<GIW TCBQRX,TCB>]; Offset of RX queue in TCB
MOVEM T1,PRCQOF(PRC) ; Store process block
MOVE T1,[<GIW TCBTRX,TCB>]; Offset of RX run time in TCB
MOVEM T1,PRCWOF(PRC) ; Store in process block
HRLOI T1,377777 ; Infinity
MOVEM T1,PRCSGT(PRC) ; Set time of most recent signal
XMOVEI T1,RXRNCT ; Pointer to run counter
MOVEM T1,PRCRNC(PRC) ; Put in standard place
XMOVEI T1,RXUSE ; Pointer to CPU use meter
MOVEM T1,PRCTMR(PRC) ; Put in standard place
RXINIX: RESTORE
RET
SUBTTL TCP Background Routines
IFE REL6,<SWAPCD>
IFN REL6,<XSWAPCD>
COMMENT !
Routines run periodically at a low rate to check for things such as
dead (closed) TCBs and connections which need to be poked in order
that they resynchronized.
!
;BACKG Top level of background
; CALL BACKG
;Ret+1: Always
BACKG: SAVEAC <PKT,TPKT>
MOVEI T1,TCBHLK ; Which lock to set
XMOVEI T2,SCAN ; Function to run
CALL LCKCAL ; Lock the lock and run the function
SKIPE INTSVR ; Was a scavenge requested?
AOS INTSVC ; Yes. Count it as having been done
SETZM INTSVR ; Cancel scavenge request
MOVX T1,PT%XX0 ; Indicate no packet
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes, Flush out the packet printer buffer
MOVE T1,TCPBGT ; Run again in a few seconds
ADD T1,TODCLK
MOVEI T2,BG ; Pointer to Background process block
MOVEM T1,PRCWAK(T2) ; BG has no input queue.
NOSKD1 ; Take the machine
IFN STANSW,< SETO T2,> ; force scan of ALL TVTs
IFE REL6,<CALL TVTCSO> ; Force scan of TVT for output
IFN REL6,<CALLX (MSEC1,TVTCSO)> ; Force scan of TVT for output
NOP
OKSKD1 ; Give back the machine
RET
;SCAN
;Scan through all TCBs and apply the functions to each
;TCBH/ Locked, NOINT
; CALL SCAN
;Ret+1: Always
SCAN: SAVEAC <TCB>
LOCAL <TCBHX,NXTTCB,Q,DEADQ>
MOVE T1,TCBDQ ; Locate queue head
MOVEM T1,DEADQ ; Save pointer to the queue
MOVEI T1,TCBHUC ; Pointer to TCBH Use Count
SKIPE TCBHUC ; Is it 0 as required?
CALL DISE ; No. Wait for that.
MOVSI TCBHX,-TCBHSZ ; Set to loop through all of TCBH
SCAN1: HRRZ Q,TCBHX ; Index into TCBH table
ADD Q,TCBH ; Plus (ext) pointer to table base
LOAD NXTTCB,QNEXT,(Q) ; Pointer to first thing on this queue
SETSEC NXTTCB,INTSEC ; Make extended address
SCAN2: MOVE TCB,NXTTCB ; Set current TCB
CAMN TCB,Q ; Back to head of queue?
JRST SCAN3 ; Yes. On to next queue
LOAD NXTTCB,QNEXT,(TCB) ; Setup for next time
SETSEC NXTTCB,INTSEC ; Make extended address
XMOVEI T1,TCBLCK(TCB) ; Pointer to lock
XMOVEI T2,FUNCS ; Routine to apply functions
MOVE T3,DEADQ ; Arg for DEADP
CALL LCKCAL ; Lock the TCB and do the functions
JRST SCAN2 ; Go to next TCB on this queue
SCAN3: AOBJN TCBHX,SCAN1 ; On to next queue
MOVE Q,DEADQ ; Queue of dead TCBs
LOAD NXTTCB,QNEXT,(Q) ; First thing on the queue
SETSEC NXTTCB,INTSEC ; Make extended address
SCAN4: MOVE TCB,NXTTCB ; Advance down the queue
LOAD NXTTCB,QNEXT,(TCB) ; Set for next time
SETSEC NXTTCB,INTSEC ; Make extended address
CAMN TCB,Q ; Back to head?
JRST SCANXX ; Yes. Done.
CALL REMBFS ; Remove all buffers from TCPDBQ
LOAD T1,TOPNF,(TCB) ; Get open/close wait bit index
CALL RELWTB ; Release it
LOAD T1,TERRF,(TCB) ; Get error wait flag number
CALL RELWTB ; Release it
XMOVEI T1,TCBLCK(TCB) ; Pointer to the lock
CALL RELLCK ; Delete that
MOVE T1,TCB
CALL DQ ; Dequeue from dead queue
CALL RETBLK ; Return the storage
SOS TCBCNT ; Now one less connection
JRST SCAN4
SCANXX: RESTORE
RET
;FUNCS
;Apply a list of functions to a TCB
;TCB/ (Extended) Locked connection block
;T1/ (Extended) Pointer to queue head for dead TCBs
;TCBHLK/Locked NOINT
; CALL FUNCS
;Ret+1: Always
FUNCS: PUSH P,T1 ; Arg is pointer to dead queue head
SKIPE INTSVR ; Scavenge free storage requested?
CALL SCAVNG ; Yes. Do it to this TCB.
CALL UPDATE ; Update Retransmission variables
CALL FIXHNG ; FLush Hung TCBs
POP P,T1 ; Get back arg for DEADP
CALL DEADP ; Check for completely closed
RET
;FIXHNG
;Flush hung TCB's by aborting them. The better way of dealing with this
;problem is to not put TCB's into a hung state, but until such time as
;someone solves that problem, we'll use this after the fact method. TCB
;must satisify the following criteria:
; - owned by job zero, associated with a TVT, TVT line number is zero
; - RCV.SND state is EST.NOT
;Takes TCB/ pointer to locked TCB
;Returns +1 always
FIXHNG: JN TOWNR,(TCB),R ; Quit if TCB owner is other than job zero
JE TTVT,(TCB),R ; Quit if TCB not associated with a TVT
JN TVTL,(TCB),R ; Quit if TVT is still there
LOAD T1,TSSYN,(TCB) ; Get Send state
CAIE T1,NOTSYN ; NOT?
RET ; Quit if send side still active
LOAD T1,TRSYN,(TCB) ; Get Recv state
CAIE T1,SYNCED ; EST?
RET ; Quit if receive side is other than active
MOVEI T1,EFP+^D7 ; T1/ error code is "Connection RESET"
CALL ABTCON ; Flush buffers, set to NOT.NOT
RET ; Return to caller
;REMBFS(TCB, TCPBDQ)
;Remove buffers owned by dead TCB
;TCB/ (Extended) Pointer to dead TCB
; CALL REMBFS
;Ret+1: Always
REMBFS: SAVEAC <BFR>
LOCAL <NEXT>
MOVE BFR,TCPBDQ ; Get pointer to queue head
LOAD NEXT,QNEXT,(BFR) ; Get first thing on queue
REMBF1: SETSEC NEXT,INTSEC ; Make extended address
MOVE BFR,NEXT
CAMN BFR,TCPBDQ ; Points at head...
JRST REMBFX ; means we are done
LOAD NEXT,QNEXT,(BFR) ; Get next item on queue
LOAD T1,BTCB,(BFR) ; Get owning TCB
SETSEC T1,INTSEC ; Make extended address
CAME T1,TCB ; Is it the one under consideration?
JRST REMBF1 ; No. Try next.
MOVE T1,BFR ; What to dequeue
CALL DQ ; Do it.
CALL RETBLK ; And return the storage
JRST REMBF1 ; Scan some more
REMBFX: RESTORE
RET
;UPDATE
;Update retransmitter control variables
;TCB/ (Extended) Locked Connection Block
;TCBHLK/Locked NOINT
; CALL UPDATE
;Ret+1: Always
UPDATE: JE <TRXPN,TRXPD>,(TCB),UPDATX ; Omit if newer algorithm
LOAD T1,TMXRT,(TCB) ; Maximum round trip time (millisec.)
LOAD T2,TMNRT,(TCB) ; Minimum
MOVE T3,T1
SUB T3,T2 ; Delta
IDIVI T3,2 ; Decay 50% towards min.
SUB T1,T3
STOR T1,TMXRT,(TCB) ; Set new max.
IDIVI T3,5
ADD T2,T3 ; Expand by 10% towards max.
STOR T2,TMNRT,(TCB) ; Set new min.
ADD T1,T2 ; 2 times new average
ADDI T1,^D1000 ; Arrange for a half second above average
ASH T1,-1
STOR T1,TRXI,(TCB) ; Is the new retransmit interval
UPDATX: RET
;DEADP
;Collect dead (closed) TCBs on a queue
;T1/ (Extended) Pointer to head of DEAD Queue
;TCB/ (Extended) Locked connection block to be examined
;TCBHLK/Locked NOINT
; CALL DEADP
;Ret+1: Always. TCB placed on dead queue if appropriate
DEADP: LOCAL <DEADQ>
MOVEM T1,DEADQ
JN TSUOP,(TCB),DEADPX ; Keep if no CLOSE from user yet
; TVT processing
JE TTVT,(TCB),DEADP1 ; Jump if not a TVT
LOAD T2,TVTL,(TCB) ; Get tvt line number, if any
JUMPE T2,DEADP2 ; Jump if no line number
NOSKD1 ; Don't let tty data change under us
CALL STADYN ; Get tty datablock, if any
TDZA T1,T1 ; Skip load if line not active
LOAD T1,PTVT,(T2) ; Get tcb pointer, if any
OKSKD1 ;
JUMPN T1,DEADPX ; Keep if tty datablock points to it
DEADP2:
JN TERR,(TCB),DEADP0 ; Jump to release JCN if error
LOAD T1,TRSYN,(TCB) ; Receive state
LOAD T2,TSSYN,(TCB) ; Send state
CAIN T1,NOTSYN ; No error & FINs exchanged
CAIE T2,NOTSYN
JRST DEADP1 ; Jump if not dead state (closed)
DEADP0:
LOAD T1,TJCN,(TCB) ; Get the JCN (owned by INTFRK)
JUMPE T1,DEADP1 ; Jump if USREVT already released it
CALL RETJCN
SETZRO TJCN,(TCB) ; (RETJCN can't do this if JCN = -1)
DEADP1:
; Common processing
JN TJCN,(TCB),DEADPX ; Keep if user can still reference this
LOAD T1,TSSYN,(TCB) ; Send state
LOAD T2,TRSYN,(TCB) ; Recv state
CAIN T1,NOTSYN
CAIE T2,NOTSYN
JRST DEADPX ; Keep unless FINd on both sides
LOAD T1,QNEXT,<+TCBRXQ(TCB)>
CAIE T1,TCBRXQ(TCB) ; Compare as if in sec. 0
JRST DEADPX ; Keep if retransmit queue non-empty
LOAD T1,QNEXT,<+TCBSBQ(TCB)>
CAIE T1,TCBSBQ(TCB)
JRST DEADPX ; Keep if stuff waiting to be sent
JN TSCB,(TCB),DEADPX ; Which might be a current SEND buffer
LOAD T1,QNEXT,<+TCBRPQ(TCB)>
CAIE T1,TCBRPQ(TCB)
JRST DEADPX ; Keep if packets waiting for RA
LOAD T1,QNEXT,<+TCBRBQ(TCB)>
CAIE T1,TCBRBQ(TCB)
JRST DEADPX ; Keep if RECV buffers waiting
JN TRCB,(TCB),DEADPX ; or if there is a current RECV buffer
SKIPN TCBQRA(TCB) ; Must not be queued for RA
SKIPE TCBQPZ(TCB) ; Or PZ
JRST DEADPX
SKIPN TCBQRX(TCB) ; Or RX
SKIPE TCBQDG(TCB) ; Or DG
JRST DEADPX
MOVE T1,TCB
CALL DQ ; Dequeue the buffer from the TCBH queue
MOVE T2,DEADQ
CALL NQ ; And put on the Dead queue
DEADPX: RESTORE
RET
;SCAVNG
;Scavenge free storage from connection blocks. All packets on the
;reassembly queue are released to permit the TCP to continue
;functioning. Retransmissions will replace them.
;TCB/ (Extended) Locked Connection block
;TCBHLK/Locked NOINT
; CALL SCAVNG
;Ret+1: Always
SCAVNG: SAVEAC <PKT>
SCAVN1: LOAD PKT,QNEXT,<+TCBRPQ(TCB)> ; Get first thing on RA queue
CAIN PKT,TCBRPQ(TCB) ; Empty if that is the head itself
JRST SCAVNX ; No more to get from this connection
SETSEC PKT,INTSEC ; Make extended address
MOVE T1,PKT ; What to dequeue
CALL DQ ; Take it off the receive packet queue
CALL RETPKT
JRST SCAVN1
SCAVNX: RET
;BGINI
;Initialize BG process block
; CALL BGINI
;Ret+1: ALways
BGINI: LOCAL <PRC>
MOVEI PRC,BG ; Pointer to the Process block for BG
SETZM PRCQ(PRC) ; Input queue
MOVEI T1,QSZ ; Size of a queue head
CALL GETBLK ; Head must in same section as items
JUMPE T1,BGINIX ; Give up, T1 is zero
CALL INITQ ; Initialize it (not used)
MOVEM T1,TCBDQ ; Queue head for SCAN
XMOVEI T1,PRCLCK(PRC) ; Lock
CALL CLRLCK ; Initilize it
XMOVEI T1,BACKG ; Background function
MOVEM T1,PRCROU(PRC) ; Routine address
MOVE T1,TODCLK ; Now
ADD T1,TCPBGT ; Plus a few seconds
MOVEM T1,PRCWAK(PRC) ; Start BG for the first time
SETZM PRCWOF(PRC) ; Store in process block
MOVEI T1,BGRNCT ; Pointer to run counter via section 0
MOVEM T1,PRCRNC(PRC) ; Put in standard place
MOVEI T1,BGUSE ; Pointer to CPU use meter
MOVEM T1,PRCTMR(PRC) ; Put in standard place
MOVX T1,QSZ ; Size of a queue head
CALL GETBLK ; Get that amount of free storage
JUMPE T1,BGINIX ; Lose
MOVEM T1,TCBDQ ; Used at cleanup (don't want to fail then)
CALL INITQ ; Initialize it
HRROI T1,-1
BGINIX:
RESTORE
RET
SUBTTL TCP Delayed Actions
IFE REL6,<SWAPCD>
IFN REL6,<XSWAPCD>
COMMENT !
Delayed actions are those things which must happen after some time
delay. No event in the TCP can be counted on to kick off these
functions.
!
;FAKEAK
;Fake input of an ACK for final outstanding FIN. This occurs if the
;final ACK gets lost in the network for more than the prescribed
;number of seconds. It is necessary because the final ACK cannot
;itself be ACKd and therefore cannot have guaranteed delivery.
;TCB/ (Extended) Connection block (locked)
; CALL FAKEAK
;Ret+1: Always.
FAKEAK: LOAD T1,TSSYN,(TCB) ; Get send state
LOAD T2,TRSYN,(TCB) ; Get recv state
CAIN T1,FINSNT ; Do we have an outstanding FIN?
CAIE T2,NOTSYN ; and recv side closed?
JRST FAKEAX ; A bug? FAKEAK should not be called?
XMOVEI T1,TCBRXQ(TCB) ; Pointer to the Retransmit queue
LOAD T2,TSLFT,(TCB) ; Send Left
LOAD T3,TSSEQ,(TCB) ; Send Sequence (1 after FIN)
SETZ T4, ; Say it is not a Recv queue
CALL REMSEQ ; Clear all that is outstanding
FAKEAX: RET
;DYINI
;Initialize DG process block
; CALL DYINI
;Ret+1: ALways, T1 zero if error
DYINI: LOCAL <PRC>
MOVEI PRC,DY ; Pointer to the Process block for DG
MOVEI T1,QSZ ; Size of a queue head
CALL GETBLK ; Head must be in same section as items
JUMPE T1,DGINIX ; Error return if no memory
MOVEM T1,PRCQ(PRC) ; Input queue
CALL INITQ ; Initialize it
XMOVEI T1,PRCLCK(PRC) ; Lock
CALL CLRLCK ; Initilize it
XMOVEI T1,FAKEAK ; The only DG function!
MOVEM T1,PRCROU(PRC) ; Routine address
SETOM PRCWAK(PRC) ; No run time yet
MOVE T1,[<GIW TCBQDG,TCB>]; Offset of DG queue in TCB
MOVEM T1,PRCQOF(PRC) ; Store process block
MOVE T1,[<GIW TCBTDG,TCB>]; Offset of DG run time in TCB
MOVEM T1,PRCWOF(PRC) ; Store in process block
HRLOI T1,377777 ; Infinity
MOVEM T1,PRCSGT(PRC) ; Set time of most recent signal
MOVEI T1,DGRNCT ; Pointer to run counter via section 0
MOVEM T1,PRCRNC(PRC) ; Put in standard place
MOVEI T1,DGUSE ; Pointer to CPU use meter
MOVEM T1,PRCTMR(PRC) ; Put in standard place
DGINIX: RESTORE
RET
SUBTTL TCP Miscellaneous Routines
IFE REL6,<SWAPCD>
IFN REL6,<XSWAPCD>
;CHKWND
;CheckWindow(Left, Sequence, Right)
;Test "Sequence" to see if it is between "Left" (inclusive) and
;"Right" (not incl.). Sequence numbers are modulo MAXSEQ and are
;always positive when represented in a 36-bit word.
;T1/ Left
;T2/ Sequence
;T3/ Right
; CALL CHKWND
;Ret+1: always. T1 has -1 if Sequence is in the window, 0 if not
CHKWND::TEMP <VAL,SEQ,RIGHT,LEFT>
MOVEM T1,LEFT ; Make T1 available for value
SETZ VAL, ; Init value
CAMG LEFT,RIGHT ; Crosses 0?
SOSA VAL ; No. Get a -1 to return
EXCH LEFT,RIGHT ; Yes. Reverse Left and Right.
CAMGE SEQ,RIGHT
CAMGE SEQ,LEFT
SETCA VAL, ; Out of window. Complement initial guess
RESTORE
RET
;OVRLAP
;Test for sequence number overlap
;Test to see if two sequence number segments have one or more common
;points. The two segments are semi-open on the right, similar to
;CHKWND.
;T1/ Left1
;T2/ Right1
;T3/ Left2
;T4/ Right2
; CALL OVRLAP
;Ret+1 always, T1 is -1 if overlap exists, 0 if not
OVRLAP: LOCAL <LEFT1,LEFT2,RIGHT2>
MOVEM T1,LEFT1
DMOVEM T3,LEFT2 ; T3,T4 to LEFT2,RIGHT2
EXCH T2,T3
CALL CHKWND
JUMPN T1,OVRLAX
MOVE T1,LEFT2
MOVE T2,LEFT1
MOVE T3,RIGHT2
CALL CHKWND
OVRLAX: RESTORE
RET
;ONLCLT
;Check timebase of sending host
;Test to see if the current packet was sent by a host which is using
;the same timebase as this host. So that we will know if the time
;stamp is valid
;PKT/ (Extended) Pointer to the packet under consideration
; CALL ONLCLT
;Ret+1: always, T1 non-0 if packet has a useable timestamp
ONLCLT: LOAD T1,PISH,(PKT) ; Get the 32-bit source address
CALL LCLHST ; Is it me?
SETZ T1, ; No, clear T1
RET
;GETISN
;Get value of initial sequence number curve
;Get the current value of the Initial Sequence Number curve. This
;curve is a straight line which starts at 0 and goes through the
;maximum sequence number minus 1 every cycle time of the network. It
;steps once a second.
; CALL GETISN
;Ret+1: always, ISN in T1
GETISN:
CALL LGTAD ; Day,,tick
HRRZS T1 ; Save tick with day
LSH T1,^D17 ; Make into binary fraction of day
; TCPISN is [^D<<MAXSEQ/8>*<<24*60*60>/CYCTIM>>]
MUL T1,TCPISN ; Get sequence number
LSH T1,@TCPISN+1 ; Scale factor of 8 above
MODSEQ T1
RET
;PKTEND(PKT)
;returns the sequence number following the packet
;PKT/ (Extended) Packet pointer
;TPKT/ (Extended) pointer to TCP part of packet
; CALL PKTEND
;Ret+1: always. End of packet plus one in T1
PKTEND: LOAD T1,PSEQ,(TPKT) ; Get the start of the packet
LOAD T2,PCTL,(TPKT) ; Get word containing control flags
TXNE T2,<PSYN> ; Count one for SYN
ADDI T1,1
TXNE T2,<PFIN> ; Another if FIN
ADDI T1,1
LOAD T2,PIPL,(PKT) ; Length of whole packet in bytes
LOAD T3,PIDO,(PKT) ; Number of words in Internet part
LOAD T4,PTDO,(TPKT) ; Number of words in TCP header
ADD T3,T4 ; Total header word count
ASH T3,2 ; Byte count
SUB T2,T3 ; Difference is # bytes in data part
ADD T1,T2 ; Each data byte is one sequence slot
MODSEQ T1 ; Take MOD field size
RET
;CHKWND
;CheckWindow(Left, Sequence, Right).
;OVRLAP
;Test for sequence number overlap.
;ONLCLT
;Check timebase of sending host.
;GETISN
;Get value of initial sequence number curve.
;PKTEND(PKT)
;returns the sequence number following the packet.
;NULPKT(PKT)
;Tells if packet doesn't contain anything ACK-able.
;PKT/ (Extended) Packet pointer
;TPKT/ (Extended) pointer to TCP part of packet
; CALL NULPKT
;Ret+1: Always. T1 -1 if packet is null, 0 if something
NULPKT: SETZ T1, ; Assume something ackable
LOAD T2,PIPL,(PKT) ; Total packet length
LOAD T3,PIDO,(PKT) ; Offset to Internet data in words
LOAD T4,PTDO,(TPKT) ; Offset to TCP data in words
ADD T3,T4 ; Number of header words, total
ASH T3,2 ; Number of header bytes, total
CAMLE T2,T3 ; Anything in TCP data part?
JRST NULPKX ; Yes. Packet is not null
LOAD T2,PCTL,(TPKT) ; Get word of control flags
TXNN T2,<PSYN!PFIN>
SETO T1, ; No data, no control. Pkt is null.
NULPKX: RET
;TRMPKT(PKT)
;Return excess storage not used in packet block.
;PKT/ (Extended) Packet pointer
;TPKT/ (Extended) pointer to TCP part of packet
; CALL TRMPKT
;Ret+1: Always. PKT may come back 0 if storage unavailable.
; Copy the little piece into a new block.
; Return all of the whole (big) packet.
TRMPKT: JE PFSIZ,(PKT),TRMPKX ; Only full-size packets can be trimmed
MOVE T1,INTNFI ; Number of free input buffer right now
CAML T1,INTNIB ; Number desired
EXIT TRMPKX ; No reason to trim. Space not tight.
LOAD T1,PIPL,(PKT) ; Internet Packet Length in bytes
ADDI T1,<4*PKTELI>+3 ; Total length, set to round up
ASH T1,-1 ; Twice number of words in packet
CAML T1,INTXPW ; Too big. Wont leave a useful tail.
EXIT TRMPKX ; or lengths smashed on input packet?
ASH T1,-1 ; # words in packet
PUSH P,T1 ; Save the new size
MOVX T1,PT%TTP ; Going to trim packet
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes
MOVE T1,(P) ; New size, w
CALL GETBLK ; And get a new little chunk
POP P,T2 ; Get back size
JUMPE T1,[MOVX T1,PT%TKT ; Killed because no space
TDNE T1,INTTRC ; Want trace?
CALL PRNPKT ; Yes
JRST TRMPK9] ; Don't copy into non-X packet
PUSH P,T1 ; Save for later
XMOVEI T3,PKTSII(T1) ; Destination
MOVEI T1,-PKTSII(T2) ; Number of words to copy
XMOVEI T2,PKTSII(PKT) ; Source
CALL XBLTA ; Do a BLT
POP P,T1 ; Restore destination pkt ptr
SETZM PKTQ(T1) ; Indicate not queued
SETZRO PFLGS,(T1) ; Clear all internal flags
TRMPK9:
PUSH P,T1 ; Save pointer to the new packet (or 0)
MOVE T2,TPKT ; Parallel pointer to TCP portion
SUB T2,PKT ; Compute offset
PUSH P,T2 ; Save it
CALL RETPKT ; Return be big piece
POP P,TPKT ; Get back offset
POP P,PKT ; Here's the replacement (or 0)
ADD TPKT,PKT ; Reconstruct pointer
TRMPKX: RET
;LCKCAL(Lock, Fn, Arg1, Arg2)
; Call Fn(Arg1, Arg2) with Lock set & NOINT
;T1/ (Extended) Lock pointer
;T2/ (Extended) Function address
;T3/ Arg1
;T4/ Arg2
; CALL LCKCAL
;Ret+1: always. T1 has value of Fn(Arg1, Arg2)
; Can be used for cross-section calls
LCKCAL::PUSH P,T1 ; (Ext) Lock address (save for UNLCK)
PUSH P,T2 ; (Ext) Function to CALL
PUSH P,T3 ; Save args from SETLCK
PUSH P,T4
MOVE T1,-3(P) ; Get pointer to the lock
CALL SETLCK ; Test and set the lock (may wait)
POP P,T2 ; Put args in standard place for a call
POP P,T1
CALL @0(P) ; Call function
ADJSP P,-1 ; Drop Function address
EXCH T1,0(P) ; Save the value while we unlock...
CALL UNLCK
POP P,T1
RET
;CHKADD
;Lookup up a connection and maybe create a new one.
;If the desired (possibly wild) connection is found, the argument
;function is called with the TCB locked. If no TCB is found, the
;value of CHKADD is -1,,errorcode. Otherwise the value is that of the
;function called, which may also be an error value.
; T1/ (Extended) Pointer to argument block defined by CHKADL
; NOINT
; CALL CHKADD
;Ret+1: always. Value in T1, TCB set up. ELP+^D13. Illegal port (LP=0)
; (net) ELP+^D5. Pkt w/ wild FH/FP; EFP+^D7. No TCB matches
; (JSYS) ELT+^D4. No storage, wait bit, too many connections
IFE STANSW,<
CHKADD::
STACKL <WILD1>
CHKADL (<TCBX,TCB.FH,TCB.FP>) ; PARAMS & other LOCALs
MOVEM T1,PARAMS ; Save pointer to parameters
HRROI T1,ELP+^D13 ; "Illegal port"
SKIPN LP
EXIT CHKADX ; Should never have to lookup wild LP
HRROI T1,ELP+^D5
SKIPE FP ; Wild FP and/or FH ok only if "listen"
SKIPN FH
SKIPE JCN ; Called from a JSYS?
CAIA
EXIT CHKADX ; Bad packet from network (FP=0 or FH=0)
; Get hash index to the TCB Hash table
CALL HTLOCK ; GET UNIQUE ACCESS TO THE HASH TABLE
MOVE T1,LP ; Local port is what is hashed on
LSH T1,-3
ADDI T1,^D23 ; Hash LP into a TCBH index
IMUL T1,LP
IDIVI T1,TCBHSZ ; Size of the hash table
ADD T2,TCBH ; (Ext) Location within TCBH
MOVEM T2,TCBX ; Save the (ext) pointer to q head
; Scan the TCB queue which has its head in the slot at TCBX
MOVE TCB,TCBX ; Initize the scan pointer
SETZM WILD1 ; No Wild match found yet
CHKAD4: LOAD TCB,QNEXT,(TCB) ; Get next (first) thing on queue
SETSEC TCB,INTSEC ; Make extended address
CAMN TCB,TCBX ; Points back to head?
JRST CHKAD6 ; Yes. Scan done.
LOAD T1,TOWNR,(TCB) ; Get Job number which owns this tcb
SKIPE JCN ; Any job ok if called from net side
IFE STANSW,<
CAMN T1,JOBNO ; Must stay in this job
>;IFE STANSW
IFN STANSW,<
CAMN T1,GBLJNO ; Must stay in this job
>;IFN STANSW
CAIA ; OK to think about this TCB
JRST CHKAD4 ; Skip it and try next
LOAD T1,TLP,(TCB) ; Get the Local Port from this TCB
CAME T1,LP ; Does it match what we are looking for?
JRST CHKAD4 ; No. Try next TCB
LOAD TCB.FH,TFH,(TCB) ; Get foreign host
LOAD TCB.FP,TFP,(TCB) ; and foreign port
CAMN TCB.FH,FH ; Compare these with what
CAME TCB.FP,FP ; is being sought
JRST CHKAD5 ; Not an exact match. Maybe OK for wild
LOAD T4,TLH,(TCB) ; Check local address also
; TCB points to an exact match. If CHKADD was called from the JSYS
; side, it means the user is trying to say more about the connection.
SKIPE JCN ; Called from a JSYS?
JRST CHKAD6 ; Yes. Go use this exact match.
LOAD T1,TRSYN,(TCB) ; Get state of Receive synchronization
LOAD T2,TSSYN,(TCB) ; and state of Send synch.
CAIN T1,NOTSYN ; Recv side still open?
CAIE T2,NOTSYN ; Send side still open?
JRST CHKAD6 ; Yes. Reuse this TCB.
JRST CHKAD4 ; Both closed. Pkt cannot reactivate
; conn. Look for another incarnation.
; See if this TCB should be remembered for use as a wild one.
CHKAD5: SKIPN WILD1 ; Continue scan if already have a wild match
SKIPN WILDOK ; Caller says OK to use wild TCB?
JRST CHKAD4 ; No. Keep looking for exact match.
JUMPE TCB.FH,.+3 ; TCB has wild foreign host
CAME TCB.FH,FH ; or exact match means ok.
JRST CHKAD4 ; No. Resume scan.
JUMPE TCB.FP,.+3 ; Wild foreign port in TCB?
CAME TCB.FP,FP ; or exact match?
JRST CHKAD4 ; No good.
MOVEM TCB,WILD1 ; Save the location of the wild TCB
JRST CHKAD4 ; Continue looking for exact match.
; End of scan. TCB has the TCB to use or points at queue head (TCBX)
; if none found. WILD1 is 0 or pointer to a wild TCB.
CHKAD6: CAME TCB,TCBX ; Found an exact match?
JRST CHKAD9 ; Yes. Go use TCB
SKIPN WILD1 ; Have a wild match?
JRST CHKAD7 ; No.
; Bind a wild match.
MOVE T1,FH ; Get the desired foreign host
MOVE T2,FP ; and foreign port
MOVE T3,LH ; and local host
MOVE TCB,WILD1 ; This is the TCB to work with
STOR T1,TFH,(TCB) ; Store in the wild TCB
STOR T2,TFP,(TCB)
STOR T3,TLH,(TCB)
JRST CHKAD9 ; Do it.
; No wild match and no exact match. If called from JSYS Create the connection.
; NOTE TCB=TCBX & WILD1=0
CHKAD7: CAMN TCB,TCBX ; If have a TCB go to CHKAD9
SKIPN JCN ; Called from a JSYS?
JRST CHKAD9 ; Net. Don't create a TCB
; JSYS & no TCB
MOVE T1,PARAMS ; Argument block address
MOVE T2,TCBX ; (Ext) Where to enqueue the new TCB
CALL NEWTCB ; Create it and initialize it.
JUMPN TCB,CHKAD9 ; Go use the new TCB
MOVEI T1,TCBHLK ; Ran out of free storage.
CALL UNLCK ; Unlock TCBH
HRROI T1,ELT+^D4 ; "No room for another connection"
EXIT CHKADX ; Report the error to the caller
; TCB has the TCB to use or is equal to TCBX if not.
REPEAT 0,<
CHKAD9: JRST CHKA10 ; Following doesn't work, why??
CAME TCB,TCBX ; Found a TCB?
SKIPN JCN ; And called from the JSYS side?
JRST CHKA10 ; No.
LOAD T1,TJCN,(TCB) ; Get original JCN of TCB
JUMPE T1,CHKA10 ; None. Use the new one.
EXCH T1,JCN ; Use the original JCN
CAME T1,JCN ; If temporary one is different,
CALL RETJCN> ; Return it (RH of JCNTCB is 0)
; If a TCB was found/created, lock it and call the argument function.
CHKAD9:
CHKA10: AOS TCBHUC ; Indicate TCBH has a reader
CALL HTUNLK ; Unlock TCBH with use count gt 0
HRROI T1,EFP+^D7 ; "No such TCB"
CAMN TCB,TCBX ; Did we locate a TCB?
JRST CHKA11 ; No. Report the error
XMOVEI T1,TCBLCK(TCB) ; Pointer to the TCB Lock
MOVE T2,FN ; Function to be called
MOVE T3,JCN ; Argument for the function
MOVE T4,ARG1 ; The argument passed through
CALL LCKCAL ; Lock the lock and call the function
CHKA11: SOS TCBHUC ; Indicate TCBH may change now
CHKADX: CHKADR ; Restore
RET
>;IFE STANSW
IFN STANSW,<;;; better CHKADD - hashes on foreign host/port too.
CHKADD::
CHKADL (<TCBX,TCB.FH,TCB.FP>) ; PARAMS & other LOCALs
MOVEM T1,PARAMS ; Save pointer to parameters
HRROI T1,ELP+^D13 ; "Illegal port"
SKIPN LP
EXIT CHKADX ; Should never have to lookup wild LP
HRROI T1,ELP+^D5
SKIPE FP ; Wild FP and/or FH ok only if "listen"
SKIPN FH
SKIPE JCN ; Called from a JSYS?
CAIA
EXIT CHKADX ; Bad packet from network (FP=0 or FH=0)
CALL HTLOCK ; GET UNIQUE ACCESS TO THE HASH TABLE
CALL TCBHSH ;hash for exact match
CALL TCBCKA ;see if there is an exact match
JUMPN TCB,CHKAD9 ;use it (TCB/etc set up)
PUSH P,TCBX ;save exact TCB hash value
CALL TCBWHS ;hash for a wild match
CALL TCBCKA ;see if there is a wild match.
JUMPN TCB,CHKAD8 ;bind a wild match and continue
POP P,T2 ;get back exact hash, TCBX has wild hash
SKIPN JCN ;called from a jsys?
JRST CHKAD9 ;no - return error.
SKIPE FP ;are there any wild cards?
SKIPN FH ; in either FP or FH ?
MOVE T2,TCBX ; yes, then use the wild hash value
MOVE T1,PARAMS ;pass it our param list
CALL NEWTCB ;try to creae a new TCB
JUMPN TCB,CHKAD9 ;got it - go use it.
MOVEI T1,TCBHLK ; Ran out of free storage.
CALL UNLCK ; Unlock TCBH
HRROI T1,ELT+^D4 ; "No room for another connection"
EXIT CHKADX ; Report the error to the caller
TCBHSH: ;;; create a hash into TCBH table using LP, FP, FH
;;; return the resulting (extended) address in T2, and TCBX
HRRZ T1,FH ;get interesting part of foreign host
TDCA T1,FP ;XOR (yes, really) in Foreign port and skip
TCBWHS: ;;; Like TCBHSH, only assumes wild (0) FP/FH
MOVE T1,LP ;start with LP for wild (skiped by TCBHSH code)
; LSH T1,-2 ;this is sort of copied from old code.
trn
IMUL T1,LP ; ...
IDIVI T1,TCBHSZ ;size of the hash table
ADD T2,TCBH ;add start of table
XMOVEI TCBX,(T2) ;put in TCBX also
RET
TCBCKA: ;;; Scan through a list starting at T2/TCBX for a TCB that matches
;;; the parameters supplied. Note that a 0 FP or FH in the TCB
;;; will match any FP/FH, but an exact match will be preferred.
;;; returns a TCB address in TCB, or 0 if no match is found.
TEMP <WILD1,NXTTCB> ;use T1 as indication of wild TCB found
SETZB TCB,WILD1 ;assume no match
TCBCK1: LOAD NXTTCB,QNEXT,(NXTTCB) ;get next (first) thing on queue
SETSEC NXTTCB,INTSEC
CAMN NXTTCB,TCBX ;back to head of the queue?
JRST TCBCKX ;yep - we are finished
LOAD T3,TLP,(NXTTCB) ;check local port (must match exactly)
CAME T3,LP ;does it match?
JRST TCBCK1 ; nope, try next in the list
LOAD TCB.FP,TFP,(NXTTCB) ;get Foreign port from TCB
LOAD TCB.FH,TFH,(NXTTCB) ;and also foreign host
CAMN TCB.FP,FP ;do both of these
CAME TCB.FH,FH ; match from both places?
IFNSK. ;no...
SKIPN WILD1 ; Continue scan if already have a wild match
SKIPN WILDOK ; Caller says OK to use wild TCB?
JRST TCBCK1 ; No. Keep looking for exact match.
JUMPE TCB.FH,.+3 ; TCB has wild foreign host
CAME TCB.FH,FH ; or exact match means ok.
JRST TCBCK1 ; No. Resume scan.
JUMPE TCB.FP,.+3 ; Wild foreign port in TCB?
CAME TCB.FP,FP ; or exact match?
JRST TCBCK1 ; No good.
XMOVEI WILD1,(NXTTCB) ; Save the location of the wild TCB
JRST TCBCK1 ; Continue looking for exact match.
ENDIF.
;;;? LOAD T4,TLH,(TCB) ; Check local address also ;;never checked.
; Now we have an exact match. see if it is in a valid state.
XMOVEI TCB,(NXTTCB) ;put TCB in cannonical place
SKIPN JCN ; called from a JSYS?
IFSKP.
LOAD T3,TOWNR,(TCB) ;if called from a JFN, we must make sure
CAMN T3,GBLJNO ; that the right user owns the connection
JRST TCBCKX ; if so, then we are finished.
ELSE.
LOAD T3,TRSYN,(TCB) ;otherwise, get receive state
LOAD T4,TSSYN,(TCB) ; get send state
CAIN T3,NOTSYN ; receive side still open?
CAIE T4,NOTSYN ; send side still open?
JRST TCBCKX ;yes, ok to use this TCB
ENDIF.
SETZ TCB, ;cant use this TCB after all.
JRST TCBCK1 ;continue looking...
TCBCKX: CAIN TCB,0 ;do we have a valid exact match TCB?
MOVE TCB,WILD1 ; no, use either a wild TCB, or 0
RET ;finished.
CHKAD8: ;;; We have a wildcard match. Bind it, which means filling in
;;; the appropriate values in the TCB. If the connection is
;;; open, we also move the TCB in the hash table to where it
;;; will be found by the exact match hash routine. Note that
;;; this TCBHSH value is still stacked.
MOVE T1,FH ; Get the desired foreign host
MOVE T2,FP ; and foreign port
MOVE T3,LH ; and local host
STOR T1,TFH,(TCB) ; Store in the wild TCB
STOR T2,TFP,(TCB)
STOR T3,TLH,(TCB)
LOAD T1,TSSYN,(TCB) ;get send state
CAIE T1,SYNCED ; is connection open?
IFSKP.
XMOVEI T1,(TCB) ;get the TCB
CALL DQ ;dequeue it from the wildcard position
POP P,T2 ;get new position where it belongs
CALL NQ ;and enqueue it there
ELSE.
POP P,T2
ENDIF.
CHKAD9: ;;; We have a TCB that is an exact match with the params, either
;;; by virtue of a wild TCB being bound to them, or a new TCB
;;; being created to match them, or just a plain exact match.
;;; Lock the TCB and call the function provided.
CHKA10: AOS TCBHUC ; Indicate TCBH has a reader
CALL HTUNLK ; Unlock TCBH with use count gt 0
HRROI T1,EFP+^D7 ; "No such TCB"
CAIN TCB,0 ; Did we locate a TCB?
JRST CHKA11 ; No. Report the error
XMOVEI T1,TCBLCK(TCB) ; Pointer to the TCB Lock
MOVE T2,FN ; Function to be called
MOVE T3,JCN ; Argument for the function
MOVE T4,ARG1 ; The argument passed through
CALL LCKCAL ; Lock the lock and call the function
CHKA11: SOS TCBHUC ; Indicate TCBH may change now
CHKADX: CHKADR ; Restore
RET
>;IFN STANSW
;TCBINI
;Initialize the TCB Hash Table.
; CALL TCBINI
;Ret+1: Always
TCBINI: LOCAL <TCBX>
MOVEI T1,TCBHSZ*QSZ ; Size of the TCB Hash table
CALL GETBLK ; Qs must point to things in same section!
JUMPE T1,TCBINX ; No space
MOVEM T1,TCBH ; (Ext) Loc of hash table.
IF1 <IFN QSZ-1,<PRINTX ? QSZ isn't 1, Fix code>>
MOVSI TCBX,-TCBHSZ ; Set to scan TCBH (assumes QSZ==1)
TCBIN1: HRRZ T1,TCBX ; Index within TCBH table
ADD T1,TCBH ; Pointer to table base
CALL INITQ ; Initialize as a queue
AOBJN TCBX,TCBIN1 ; Loop over all slots
SETZM TCBHUC ; Clear the use count
XMOVEI T1,TCBHLK ; Pointer to the lock on TCBH
CALL CLRLCK ; Initialize it
TCBINX: RESTORE
RET
; Routine to get unique access to the TCB Hash table. This means having
; it locked with the TCBH Use Count = 0.
HTLOCK::
XMOVEI T1,TCBHLK ; Pointer to the TCBH Lock
CALL SETLCK ; Test and set the lock
SKIPG TCBHUC ; TCBH Use Count. Any readers?
RET ; OK we have sole access
XMOVEI T1,TCBHLK ; Pointer to the lock
CALL UNLCK ; Unlock it.
MOVEI T1,TCBHUC ; Pointer to the use count
CALL DISE ; Wait for it to go to zero
JRST HTLOCK ; and try again.
HTUNLK:: ; Hash table unlock routine
MOVEI T1,TCBHLK ; Pointer to the TCBH lock
CALL UNLCK ; Unlock the lock
RET ; and return to caller
IFE STANSW,<
; Routine to get TCB Hash table index from local port number
; Local port is in T1. Returned in T2.
TCBHSH:: ; Get TCB hash
MOVE T2,T1 ; Save port number for a while
LSH T1,-3 ; Divide port by 8
ADDI T1,^D23 ; Add in a prime
IMUL T1,T2 ; Multiply by the local port number
IDIVI T1,TCBHSZ ; Divide by the size of the hash table
ADD T2,TCBH ; Get location within TCBH
RET ; Return to caller
>;IFE STANSW
;NEWTCB
;Initialize a new connection block.
;T1/ PARAMS ; (Ext) address of parameter block
;T2/ TCBX ; (Ext) Adr of TCB Hash table entry
; CALL NEWTCB
;Ret+1: always. TCB points to the TCB or is 0 if no space,
; too many conn, no wait bits
NEWTCB: CHKADL (TCBX)
MOVEM T1,PARAMS ; Argument block address
MOVEM T2,TCBX ; Where to enqueue new TCB
MOVE T2,TCBCNT ; Current number of connections
CAML T2,TCBMAX ; Test against max we support at once
JRST NEWTCE ; No room for another.
MOVX T1,TCBSIZ ; Size of a connection block
CALL GETBLK ; Get a block of free storage
JUMPE T1,NEWTCE ; None available. Fail.
MOVEM T1,TCB ; Put (ext) adr in standard place
MOVX T2,TCBSIZ ; Size again for CLRBLK
CALL CLRBLK
MOVE T1,LH ; Set the local host
STOR T1,TLH,(TCB)
STOR T1,TOPLH,(TCB)
MOVE T2,LP ; Set the local port
STOR T2,TLP,(TCB)
MOVE T3,FH ; Set the foreign host
STOR T3,TFH,(TCB)
STOR T3,TOPFH,(TCB)
MOVE T4,FP ; Set the foreign port
STOR T4,TFP,(TCB)
STOR T4,TOPFP,(TCB)
JUMPN T4,NEWTC0 ; Wild foreign port?
SETONE TWLDP,(TCB) ; Yes.
NEWTC0:
EXCH 0,T3
LOAD T4,NETCLS ; Get network class bit(s)
EXCH 0,T3
TDZ T3,INTCLS(T4) ; Drop class bit(s)
TDZE T3,INTNET(T4) ; Net field zero?
JRST NEWTC1 ; No, but host might be.
JUMPN T3,NEWTC2 ; Yes, but host isn't, neither wild
SETONE <TWLDN,TWLDT>,(TCB) ; Wild net & host
JRST NEWTC2
NEWTC1: JUMPN T3,NEWTC2 ; Wild foreign host?
SETONE TWLDT,(TCB) ; Yes. Wild host, net specified
NEWTC2:
XMOVEI T1,TCBSBQ(TCB) ; TCB Send buffer queue
CALL INITQ ; Initialize it.
XMOVEI T1,TCBRXQ(TCB) ; TCB Retransmission queue
CALL INITQ ; Initialize it.
XMOVEI T1,TCBRBQ(TCB) ; TCB Receive buffer queue
CALL INITQ ; Initialize it.
XMOVEI T1,TCBRPQ(TCB) ; TCB Receive packet queue
CALL INITQ ; Initialize it.
CALL ASNWTB ; Assign a wait bit index for open/close
JUMPL T1,NEWTC9 ; Jump if we didn't get the bit.
STOR T1,TOPNF,(TCB) ; Set into TCB
CALL CLRWTB ; Initialize to zero state (closed)
CALL ASNWTB ; Get another bit for error events
JUMPL T1,NEWTC8 ; Jump if that failed
STOR T1,TERRF,(TCB) ; Set into TCB
CALL CLRWTB ; Clear it. (No error yet)
XMOVEI T1,TCBLCK(TCB) ; Pointer to the TCB lock
CALL CLRLCK ; Clear it.
MOVX T1,^D60 ; Default time to live
STOR T1,TTTL,(TCB) ; for this connection
MOVX T1,<<1B<35-WID(PIPL)>>-1> ; Max possible packet 2**16-1 octets
STOR T1,TSMXP,(TCB) ; including headers
XMOVEI T1,TCBQ(TCB) ; (Ext) Pointer to the TCB just initialized
MOVE T2,TCBX ; (Ext) Adr of TCB Hash table entry (of Q's)
CALL NQ ; Place it on the right queue
AOS TCBCNT ; Count as another connection
EXIT NEWTCX
NEWTC8: LOAD T1,TOPNF,(TCB) ; Oh well. Have to back out.
CALL RELWTB ; Release the open/close wait bit
NEWTC9: MOVE T1,TCB ; Pointer to the connection block
CALL RETBLK ; Give back that storage
NEWTCE: SETZ TCB, ; Tell caller the bad news.
NEWTCX: CHKADR
RET
;TSMXP
;Update maximum packet size generated on connection.
; T1/ Foreign specified limit (from option), or 0
; CALL TCPMXP
TCPMXP:
SAVEAC <P1>
LOCAL <PSZ>
SKIPLE PSZ,T1 ; Save argument if specified
CAIL PSZ,177777 ; Infinite size?
TRNA ; not ok to use
JRST TCPMX6 ; ok to use
LOAD T1,TFH,(TCB) ; Get foreign address
CALL LCLHST ; Is it one of us?
SKIPA PSZ,[^D576] ; No, sociable maximum
MOVE PSZ,TCPBYS ; Yes, big ones
; Packet Radio Kludge - small packets to certain nets
LOAD T2,TFH,(TCB) ; Foreign address contains
NETNUM T2,T2 ; Foreign net number
CAIE T2,^D1 ; BBN-PR
CAIN T2,^D2 ; SF-PR-1
MOVEI PSZ,^D254
CAIE T2,^D5 ; SILL-PR
CAIN T2,^D6 ; SF-PR-2
MOVEI PSZ,^D254
CAIE T2,^D9 ; BRAGG-PR
CAIN T2,^D47 ; SAC-PR
MOVEI PSZ,^D254
; End of Kludge
; This isn't true if bypassing
TCPMX6:
LOAD T1,TLH,(TCB) ; Foreigner's name for us
CALL FNDNCT ; Put address of interface in T2
CAIA ; Not found
SKIPG T1,NTPSIZ(P1) ; Get max size for that (interface) net
MOVE T1,INTXPB ; None or 0, use maximum packet length
CAMLE PSZ,T1 ; Use it if smaller
MOVE PSZ,T1
CAMLE PSZ,TCPBYS ; User want bigger than we support?
MOVE PSZ,TCPBYS ; Yes, Clamp to our max
CAIGE PSZ,<.RTJST(-1,PIDO)+.RTJST(-1,PTDO)>*4+^D8 ; Beware too
MOVX PSZ,<<.RTJST(-1,PIDO)+.RTJST(-1,PTDO)>*4+^D8> ; small
STOR PSZ,TSMXP,(TCB) ; Set max packet size for connection
RESTORE
RET
;TCPIPK
;Get space for packet and fill in headers.
; TCPIPK(Min size (w), Max siz (w) or 0, Adr of addresses or 0 if TCB)
; T1/ 0 (or maximum) data length, in octets
; T2/ Address of address block, or 0 if addresses in TCB are valid
; Address block: 32-bit Destination address
; 32-bit Source (local) address
; 16-bit Destination port
; 16-bit Source port
; TCB/ Contains addresses if T2 is zero; may be zero
; Call TCPIPK
;Ret+1: Cannot get space for packet, or neither T2 nor TCB specified
;Ret+2: Success, PKT & TPKT set, packet headers & options set
; PICKS/ contains maximum PIPL allowed
; PIPL/ header+option length
; T1/ PICKS-PIPL is available for data
TCPIPK: LOCAL <SIZW,ADRS>
MOVEM T2,ADRS ; Save Adr block address or 0
ADD T2,TCB ; Make sure have TCB or Adr argument
SKIPN T2 ; Both T2 & TCB zero is error
JRST TCPIPV ; Lose
; Try to assign a block of free storage for the packet to be sent.
MOVEI T2,TCPNPW ; Minimal packet (w/ max headers)
EXCH T2,T1
JUMPN T2,TCPIPB ; Use GETBBK for data
MOVEM T1,SIZW ; Save minimal size
CALL GETBLK ; Get block that big
JUMPE T1,TCPIPV ; Lose
JRST TCPIPC
TCPIPB: ADDI T2,3 ; Round up data count
ASH T2,-2 ; words
ADD T2,T1
CAMLE T2,INTXPW ; Don't ask for more than
MOVE T2,INTXPW ; Maximal pkt
CALL GETBBK ; Get biggest block of free storage
HLRZ SIZW,T1 ; Size, wds, of block gotten, if any
HRRZS T1 ; Clear garbage from addr pointer
JUMPE T1,TCPIPV ; Lose
SETSEC T1,INTSEC ; Make extended address (GETBBK)
TCPIPC: MOVE PKT,T1 ; Put in standard place
MOVEI T1,PKTELI+<<MINIHS+3>/4>-1 ; Clear through IP header
XMOVEI T2,(PKT) ; Source
XMOVEI T3,1(T2) ; Destination
SETZM 0(T2) ; Clear a word.
CALL XBLTA ; Clear the rest
; Fill in IP header
MOVEI T1,.INTVR
STOR T1,PIVER,(PKT) ; Store protocol version number
MOVEI T1,<MINIHS+3>/4 ; # words in smallest IN hdr
STOR T1,PIDO,(PKT) ; Set as initial data offset
ASH T1,2 ; Length, bytes
STOR T1,PIPL,(PKT) ; Current length
AOS T2,TCPSID ; Get the next segment ID
STOR T2,PISID,(PKT) ; Into packet
SETO T3, ; Max time to live
JUMPE TCB,TCPIPE ; No TCB values, use 0
LOAD T3,TTOS,(TCB) ; Copy Type of Service
STOR T3,PITOS,(PKT)
LOAD T3,TIFDF,(TCB) ; Copy Don't Fragment flag
STOR T3,PIDF,(PKT)
LOAD T3,TTTL,(TCB) ; Copy Time to Live
TCPIPE: STOR T3,PITTL,(PKT) ; Set Time to Live
MOVEI T3,.TCPFM ; TCP format
STOR T3,PIPRO,(PKT) ; Set into protocol field
; Stuff in all pertinent Internet options so we can know where
; the TCP portion will begin
CALL TCPIIO ; Insert IP Options & adjust PIDO
; and PIPL (Note TCB may be 0)
; Set pointer to TCP portion of packet now that all internet
; options have been set or reserved.
XMOVEI TPKT,PKTELI(PKT) ; Pointer to Internet portion
LOAD T2,PIDO,(PKT) ; Internet data offset (inc opt)
ADDB T2,TPKT ; T2 & TPKT now point at TCP area of pkt
MOVEI T1,<<MINTHS+3>/4>-1 ; Clear it
XMOVEI T3,1(T2) ; Destination
SETZM 0(T2) ; Clear a word.
CALL XBLTA ; Clear the rest
; Fill in IP addresses & TCP header
SKIPN ADRS ; Address block specified?
JRST TCPIPH ; No, use TCB
DMOVE T1,(ADRS) ; Get addresses from arg block
DMOVE T3,2(ADRS)
JRST TCPIPI
TCPIPH: LOAD T1,TFH,(TCB) ; Destination address
LOAD T2,TLH,(TCB) ; Source address
LOAD T3,TFP,(TCB) ; Destination port
LOAD T4,TLP,(TCB) ; Source port
TCPIPI:
STOR T1,PIDH,(PKT) ; Store the destination host
STOR T2,PISH,(PKT) ; Store the source host
STOR T3,PDP,(TPKT) ; Store the destination port
STOR T4,PSP,(TPKT) ; Store the source port
MOVEI T1,<<MINTHS+3>/4> ; Minimum TCP header size
STOR T1,PTDO,(TPKT) ; Set into TCP data offset field
ASH T1,2 ; Bytes in TCP header
LOAD T2,PIPL,(PKT) ; Current IP header length (inc opt)
ADD T2,T1 ; Total IP+TCP header length
STOR T2,PIPL,(PKT) ; Set Internet packet length
; Now the Internet header is initialized and we can add TCP options.
CALL TCPITO ; Insert TCP options & update PTDO
; and PIPL (Note TCB may be 0)
IFL <WID(PICKS)-WID(PIPL)>,<? PRINTX Width of PIPL exceeds that of PICKS>
MOVEI T1,-PKTELI(SIZW) ; Words for IP+TCP+DATA
ASH T1,2 ; Max # bytes (max PIPL)
MOVE T2,INTXPB ; Maximum for all interfaces
CAMLE T1,T2 ; Bigger than max allowed?
MOVE T1,T2 ; Yes, limit it
SKIPE TCB ; Have TCB?
LOAD T2,TSMXP,(TCB) ; Connection maximum
CAMLE T1,T2 ; Bigger than connection max?
MOVE T1,T2 ; Yes, limit it
STOR T1,PICKS,(PKT) ; Save max PIPL (PICKS unused til end)
LOAD T2,PIPL,(PKT) ; Total header size
SUB T1,T2 ; Octets available for data
MOVE T2,TODCLK ; Current millisecond number
STOR T2,PTS,(PKT) ; Store as timestamp
TDZA T2,T2 ; 0 OK
TCPIPV: SETO T2, ; NZ is bad
RESTORE
SKIPN T2 ; Skip if bad
AOS (P) ; Skip if good
RET
SUBTTL TCP Option Routines
IFE REL6,<SWAPCD>
IFN REL6,<XSWAPCD>
COMMENT !
These routines perform various functions associated with
TCP and Internet Options. Options are stored in packets
after the header and before the data. The format is
described in TCPPAR.
!
;TCPIIO
;Insert IP Options (from TCB image) into packet.
; PKT/ (ext) pointer to packet being constructed
; TCB/ (ext) pointer to TCB or 0
; CALL TCPIIO
;Ret+1: Always, Any options inserted & PIPL & PIDO updated accordingly
TCPIIO: JUMPE TCB,TCPIIX ; No TCB
LOAD T1,TIPDO,(TCB) ; TOTAL IP header size, words
SUBI T1,<MINIHS+3>/4 ; Minus standard header
JUMPLE T1,TCPIIX ; No IP options
LOAD T2,PIDO,(PKT) ; IP header size, words
CAIE T2,<MINIHS+3>/4 ; Insert or refresh?
JRST TCPII5 ; Refresh
; Insert options
ADD T1,T2 ; Desired header+options
CAILE T1,.RTJST(-1,PIDO) ; Too big?
MOVX T1,.RTJST(-1,PIDO) ; Clamp to max
STOR T1,PIDO,(PKT) ; Update IP header size, words
SUB T1,T2 ; Room for options, words
MOVE T4,T1 ; Option words
LSH T4,2 ; Bytes in option words
LOAD T2,PIPL,(PKT) ; Current packet length
ADD T2,T4 ; New packet length, bytes
STOR T2,PIPL,(PKT) ; Updated packet length
JRST TCPII8
; Refresh options
TCPII5: MOVE T1,T2 ; Available space
SUBI T1,<MINIHS+3>/4 ; for options
TCPII8:
; Copy options into header
XMOVEI T2,TCBIO(TCB) ; Option image in TCB
XMOVEI T3,PKTELI(PKT) ; IP header base
ADDI T3,<MINIHS+3>/4 ; Pointer to IP option area
CALL XBLTA ; Options into header
TCPIIX:
RET
;TCPITO
;Insert TCP options (from TCB image) into packet.
; PKT/ (ext) pointer to packet being constructed
; TPKT/ (ext) pointer to TCP portion of packet
; TCB/ (ext) pointer to TCB or 0
; CALL TCPITO
;Ret+1: Always, any options copied & PIPL and PTDO updated
TCPITO: JUMPE TCB,TCPITX ; No TCB
LOAD T1,TTPDO,(TCB) ; TOTAL TCP header size, words
SUBI T1,<MINTHS+3>/4 ; Minus standard header
JUMPLE T1,TCPITX ; No TCP options
LOAD T2,PTDO,(TPKT) ; TCP header size, words
MOVE T3,TPKT ; TCP header base
ADD T3,T2 ; Pointer to TCP option area
ADD T1,T2 ; Desired header+options
CAILE T1,.RTJST(-1,PTDO) ; Too big?
MOVX T1,.RTJST(-1,PTDO) ; Clamp to max
STOR T1,PTDO,(TPKT) ; Update TCP header size, words
SUB T1,T2 ; Room for options, words
MOVE T4,T1 ; Option words
LSH T4,2 ; Bytes in option words
LOAD T2,PIPL,(PKT) ; Current packet length
ADD T2,T4 ; New packet length, bytes
STOR T2,PIPL,(PKT) ; Updated packet length
XMOVEI T2,TCBTO(TCB) ; Option image in TCB
CALL XBLTA ; Options into header
TCPITX:
RET
; Maximum # words for options
MAXIOW==1_<WID(PIDO)>-1-<MINIHS+3>/4 ; Max # IP option words
MAXTOW==1_<WID(PTDO)>-1-<MINTHS+3>/4 ; Max # TCP option words
MAXOPW==MAXIOW ; Max of the two
IFG <MAXTOW-MAXIOW>,<MAXOPW==MAXTOW>
; AC redefinitions - Temp and Local register definitions initiated
; by CALL OPSAV
OPSAV: STACKL <UPTRS,<UOPS,MAXOPW+1>,<REGS,11+1>>
MOVEM 11,11+REGS ; Save last reg
MOVEI 11,REGS ; 0,,save area adr
BLT 11,11-1+REGS ; Save others
MOVX CX,<MSEC1,,R> ; Wipe out our
EXCH CX,-2+UPTRS ; return with dummy
CALL (CX) ; Back to mainline
JRST OPRES ; Go clean up stack
OPTS==0 ; Bit corresponding to options present
RP==2 ; Pointer to received option byte
RC==3 ; Count of remaining received option bytes
BIT==4 ; Bit corresponding to current option
OPT==5 ; Option (byte)
OPL==6 ; Option length
OPC==7 ; Count of remaining option bytes
OPP==10 ; Pointer to option byte
IORT==11 ; Pointer to IP or TCP Info table
; Option Tables
DEFINE OPTION (T,NA,C,NU,L,U,R,E)<
EXP NU
> ; End of DEFINE OPTION
-NIPOP,,.+1 ; IP option numbers
IOPNU: IPOPTS
NIPOP==.-IOPNU ; # IP options
ENDOPT
-NTCPOP,,.+1 ; TCP option numbers
TOPNU: TCPOPTS
NTCPOP==.-TOPNU ; # TCP options
ENDOPT
DEFINE OPTION (T,NA,C,NU,L,U,X)<
IFE REL6,<
IFDEF NA'U,<MSEC1,,NA'U>
IFNDEF NA'U,<MSEC1,,X>>
IFN REL6,<
IFDEF NA'U,<XCDSEC,,NA'U>
IFNDEF NA'U,<XCDSEC,,X>>> ; End of DEFINE OPTION
OPTCOF==.-IOPNU ; Is user option valid
IPOPTS (CHK,RSKP) ; Known IP Options
MSEC1,,RSKP ; Unknown IP Options - OK if cannot prove wrong
MSEC1,,RSKP ; Maintain spacing
TCPOPTS (CHK,RSKP) ; Known TCP Options
MSEC1,,RSKP ; Unknown TCP Options - OK if cannot prove wrong
OPTDOF==.-IOPNU ; Should received option be dropped or sent?
IPOPTS (CPY,R) ; Known IP Options
MSEC1,,R ; Unknown IP Options - Drop unknowns
MSEC1,,R ; Maintain spacing
TCPOPTS (CPY,R) ; Known TCP Options
MSEC1,,R ; Unknown TCP Options - Drop unknowns
OPTXOF==.-IOPNU ; What does received option mean?
IPOPTS (XCT,R) ; Known IP Options
MSEC1,,R ; Unknown IP Options - Forget unknowns
MSEC1,,R ; Maintain spacing
TCPOPTS (XCT,R) ; Known TCP Options
MSEC1,,R ; Unknown TCP Options - Forget unknowns
DEFINE OPTION (T,NA,C,NU,L,U,R,E)<
NA'LEN==L
> ; End of DEFINE OPTION
IPOPTS
TCPOPTS
;TCPUOP
;Process User specified options.
; T1/ (ip,,tcp) user section 0 option addresses (or -1 to re-merge)
; TCB/ (ext) pointer to locked connection block
; CALL TCPUOP
;Ret+1: Always, T1 is 0 or error code
TCPUOP::
CALL OPSAV ; Save regs & get working area
MOVEM T1,UPTRS ; Save user addresses
HLRZ T2,UPTRS ; User address of IP options
JUMPE T2,TCPUO2 ; None
XMOVEI IORT,IPINFO ; IP Info
SETZ T1, ; Incase re-merge
CAIE T2,-1 ; Skip PARSOP if re-merge
CALL PARSOP ; Parse and validate user specified options
JUMPN T1,TCPUOX ; Error
CALL MERGE ; Merge new user options with received
TCPUO2:
HRRZ T2,UPTRS ; User address of TCP options
JUMPE T2,TCPUO4 ; None
XMOVEI IORT,TCPINFO ; TCP Info
SETZ T1, ; Incase re-merge
CAIE T2,-1 ; Skip PARSOP if re-merge
CALL PARSOP ; Parse and validate user specified options
JUMPN T1,TCPUOX ; Error
CALL MERGE ; Merge new user options with received
TCPUO4:
SETZ T1, ; All ok
TCPUOX: MOVEM T1,T1+REGS ; Return value
RET
;PARSOP
;Parse and validate user specified options.
; T2/ (section 0) user address of options (non-zero if here)
; IORT/ (Ext) pointer to IP or TCP Info table
; CALL PARSOP
;Ret+1: Always, T1 non-zero if error
PARSOP: SETZM OPTS ; No user options yet
MOVE T1,MXW(IORT) ;MAXxOW ; Max possible length, w
XMOVEI T3,UOPS ; Our local copy
CALL BLTUM ; Get user options
MOVE T3,MXW(IORT) ;MAXxOW ; Maximum length, w
LSH T3,2 ; Bytes
MOVE OPC,T3 ; Used later too
MOVX OPP,<POINT 8,UOPS,7> ; Byte pointer to first
PARSO2: LDB OPT,OPP ; Get option
ANDCM OPT,CPY(IORT) ;CPYOPT/0 ; Without copy on fragmentation
CAIN OPT,ENDOPT ; End?
JRST PARSO6 ; Yes
CAIN OPT,NOPOPT ; NOP?
JRST PARSO4 ; Yes
MOVE T1,OTAB(IORT) ; XCDSEC,,xOPNU ; Address of option table
MOVE T1,-1(T1) ; -count,,address of first
CAME OPT,(T1) ; This it?
AOBJN T1,.-1 ; No, try next
HLRE BIT,T1 ; -i or 0
SKIPE BIT ; Unknown option
MOVE BIT,BITS+^D36(BIT) ; Known option
CALL @OPTCOF(T1) ; Check option
JRST PARSO9 ; Looses
ILDB OPT,OPP ; Get length (maybe)
CAIL OPC,2 ; Enough for length?
CAMGE OPC,OPT ; Enough for option?
JRST PARSO9 ; No, error
IORM BIT,OPTS ; Remember option exists
SUBI OPC,1 ; Count option byte
SUBI OPT,1 ; Already past it
IFN NOPOPT-1,<
CAIA
PARSO4: MOVX OPT,1 ; Option length is 1 (NOPOPT)
> ; End of IFN NOPOPT-1
IFE NOPOPT-1,<PARSO4:> ; OPT code is length
SUB OPC,OPT ; Free bytes after this option
ADJBP OPT,OPP ; Point at next
MOVEM OPT,OPP
JUMPG OPC,PARSO2 ; Back for next option
PARSO6:
SUB T3,OPC ; Used bytes
JUMPLE OPC,PARSO7 ; No free bytes
SETZ T1,
IDPB T1,OPP ; Clear free bytes
SOSLE OPC
JRST .-2
PARSO7:
XCT SOU(IORT) ;STOR T3,TxPOU,(TCB) ; Store user option bytes
MOVE T1,MXW(IORT) ;MAXxOW ; Max possible length, w
XMOVEI T2,UOPS ; New options
XCT XTOU(IORT) ;XMOVEI T3,TCBxU(TCB) ; TCB location
CALL XBLTA ; Copy them there
XCT SOF(IORT) ;STOR OPTS,TxOPF,(TCB) ; Save flags
TDZA T1,T1 ; No error
PARSO9: HRROI T1,ELP+^D2 ; Error
RET
;LSRCHK
;Make sure routing options end with packet source address.
; T1/ Option table index (free)
; T2/ (free)
; T3/ Max count (preserve)
; T4=BIT/ Bit representing option (preserve)
; OPT/ Option code w/o CPYOPT (free)
; OPP/ Pointing at option code byte (preserve)
; OPC/ Remaining count (preserve)
; TCB/ Locked (ext) TCB address
; CALL LSRCHK or SSRCHK
; Return+1 Error in option
; Return+2 Ok
LSRCHK:
SSRCHK:
SAVEAC <OPP>
JE TLH,(TCB),RUTCKO ; Not yet specified so cannot check
ILDB T2,OPP ; Length
ILDB OPT,OPP ; Initial pointer
CAIL T2,7 ; 7 is leagal but 13(8) is reasonable
CAIE OPT,4
JRST RUTCKE ; Bad
SUBI T2,3 ; Option header length
RUTCKL: ILDB OPT,OPP ; Next address byte
LSH T1,^D8 ; Room for another byte
IOR T1,OPT ; of address
SOSLE T2 ; More bytes?
JRST RUTCKL ; Yes
ANDX T1,<BYTE (4)0(8)377,377,377,377> ; Just last 4 bytes
LOAD T2,TLH,(TCB) ; Source
CAMN T1,T2 ; Same?
RUTCKO: AOS (P) ; OK, skip return
RUTCKE: RET
;TCPXIO
;Extract interesting IP options from received packet.
; PKT/ (ext) pointer to IP header
; TCB/ (ext) pointer to locked TCB
; CALL TCPXIO
;Ret+1: Always, options updated/processed
TCPXIO: LOAD T1,PIDO,(PKT) ; IP header size, w
SUBI T1,<MINIHS+3>/4 ; Size w/o options
JUMPLE T1,TCPXIX ; None
CALL OPSAV ; Save regs & get working area
MOVE T2,PKT
ADDI T2,PKTELI+<MINIHS+3>/4
XMOVEI IORT,IPINFO ; IP Info
CALL TCPXXO ; Process received IP options
TCPXIX: RET
;TCPXTO
;Extract interesting TCP options from received packet.
; TPKT/ (ext) pointer to TCP header
; TCB/ (ext) pointer to locked TCB
; CALL TCPXTO
;Ret+1: Always, options updated/processed
TCPXTO: LOAD T1,PTDO,(TPKT) ; TCP header size, w
SUBI T1,<MINTHS+3>/4 ; Size w/o options
JUMPLE T1,TCPXTX ; None
CALL OPSAV ; Save regs & get working area
MOVE T2,TPKT
ADDI T2,<MINTHS+3>/4
XMOVEI IORT,TCPINFO ; TCP Info
CALL TCPXXO ; Process TCP options
TCPXTX:
RET
;TCPXXO
;Scan options.
; T1/ # option words
; T2/ (ext) pointer to options in packet
; IORT/ (Ext) Information table address
; CALL TCPXXO
;Ret+1: Always
TCPXXO: PUSH P,T1 ; Save received option words
SETZM UOPS ; Clear working area
MOVEI T4,UOPS ; Build BLT word
HRLS T4
ADDI T4,1 ; But save T2
BLT T4,MAXOPW-1+UOPS
MOVE T1,(P) ; Words received
XMOVEI T3,UOPS
CALL XBLTA ; Get options from packet
MOVE RC,(P) ; Words received
LSH RC,2 ; Bytes
MOVEM RC,(P) ; Save for later
MOVX RP,<POINT 8,UOPS,7> ; First received option
TCXXX3: LDB OPT,RP ; Reveived option byte
ANDCM OPT,CPY(IORT) ;CPYOPT/0 ; Without copy on fragmentation
CAIN OPT,ENDOPT ; End of options?
JRST TCXXX7 ; Yes, all done
CAIN OPT,NOPOPT ; Watch out for length 1
JRST TCXXX5
MOVE T1,OTAB(IORT) ; XCDSEC,,xOPNU ; Option table address
MOVE T1,-1(T1) ; AOBJN pointer for options
CAME OPT,(T1) ; This the option?
AOBJN T1,.-1 ; No, look further
ILDB OPT,RP ; Get option length
CALL @OPTXOF(T1) ; Interpret option
LDB OPT,RP ; Option length
IFN NICSW,<
CAIGE OPT,2 ; Make sure at least this long
MOVEI OPT,2 ; So we don't lose
>;IFN NICSW
SUBI RC,1 ; Count option code
SUBI OPT,1 ; Already past it
IFN NOPOPT-1,<
CAIA
TCXXX5: MOVX OPT,1 ; Option length is 1 (NOPOPT)
> ; End of IFN NOPOPT-1
IFE NOPOPT-1,<TCXXX5:> ; OPT code is length
SUB RC,OPT ; Bytes left to process
ADJBP OPT,RP ; Option byte
MOVEM OPT,RP
JUMPG RC,TCXXX3 ; Loop if more
TCXXX7:
MOVNS RC
ADD RC,(P) ; Acutal option bytes
XCT SOR(IORT) ;STOR RC,TxPOR,(TCB)
ADJSP P,-1 ; Restore stack
MOVE T1,MXW(IORT) ;MAXxOW
XMOVEI T2,UOPS
XCT XTOR(IORT) ;XMOVEI T3,TCBxR(TCB)
CALL XBLTA ; Save options for future
CALL MERGE ; Merge them with user's
RET
;MSLXCT
;Received TCP Maximum Segment Length Option.
; RP/ Points to length byte
; CALL MSLXCT
;Ret+1: Always, TSMXP updated if possible
MSLXCT: SAVEAC <RP,RC>
MOVE T3,RP
LDB T4,T3 ; Get length
CAIE T4,MSLLEN ; Right length?
JRST MSLXCX ; No, ignore
SETZ T1,
MOVX T4,<-2,,0> ; Two more bytes
MSLXC4: ILDB T2,T3 ; Accumulate #
LSH T2,^D<36-8>
LSHC T1,^D8
AOBJN T4,MSLXC4
IFN NICSW,<
ADDI T1,MINIHS+MINTHS
>
CALL TCPMXP ; Compute new segment length
MSLXCX: RET
;MERGE
;User options and received options into send options.
; IORT/ IP/TCP Information table address
; CALL MERGE
MERGE: XCT XFOU(IORT) ;XMOVEI T2,TCBxU(TCB) ; Assume User options
XCT LOU(IORT) ;LOAD OPP,TxPOU,(TCB) ; User bytes used
XCT LOR(IORT) ;LOAD RC,TxPOR,(TCB) ; Received bytes used
JUMPE RC,MERGE8 ; Nothing to merge - User only
MOVE OPC,MXW(IORT) ;MAXxOW ; Max words allowed
LSH OPC,2 ; Max bytes allowed
SUB OPC,OPP ; Free bytes after User
JUMPLE OPC,MERGE8 ; No room for merge - User only
; Either merge or copy/drop received options
ADJBP OPP,[POINT 8,UOPS,7] ; Point at free output byte
MOVE T1,MXW(IORT) ;MAXxOW ; Begin with User options
XMOVEI T3,UOPS ; Get user options
CALL XBLTA
MOVE RP,POR(IORT) ;POINT 8,TCBxR(TCB),7>) ; Received options
XCT LOR(IORT) ;LOAD RC,TxPOR,(TCB) ; Get received bytes
XCT LOF(IORT) ;LOAD OPTS,TxOPF,(TCB) ; Get User option flags
MERGE3: LDB OPT,RP ; Reveived option byte
ANDCM OPT,CPY(IORT) ;CPYOPT/0 ; Without copy on fragmentation
CAIN OPT,ENDOPT ; End of options?
JRST MERGE5 ; Yes, All done
CAIN OPT,NOPOPT ; Nop?
JRST [SUBI RC,1 ; Length
ILDB OPT,RP ; Point at next
JRST MERGE4] ; Go to loop
; Option with length
MOVE T1,OTAB(IORT) ; XCDSEC,,xOPNU ; Option table address
MOVE T1,-1(T1) ; AOBJN pointer for options
CAME OPT,(T1) ; This the option?
AOBJN T1,.-1 ; No, look further
HLRE BIT,T1 ; -i (or 0)
SKIPE BIT
MOVE BIT,BITS+^D36(BIT) ; 1B<36-i>
LDB OPT,RP ; Copy option
DPB OPT,OPP
ILDB OPT,RP ; Get length
IFN NICSW,<
CAIGE OPT,2 ; Make sure at least this long
MOVEI OPT,2 ; So we don't lose
>;IFN NICSW
SUB RC,OPT ; Received bytes after this option
MOVEI OPL,-1(OPT) ; # bytes left to copy in this option
TRNN OPTS,(BIT) ; If User specified, drop
CAMLE OPT,OPC ; or if not enough space
CAIA ; Go drop it
CALL @OPTDOF(T1) ; Try to copy it
CALL MERGED ; Drop it
MERGE4:
SKIPLE RC ; If more left
JUMPG OPC,MERGE3 ; and room, loop
MERGE5:
MOVX OPT,ENDOPT ; End options (may overflow
DPB OPT,OPP ; into guard word ending UOPS)
XMOVEI T2,UOPS ; Copy from merged
MOVE OPP,MXW(IORT) ;MAXxOW ; Maximum option words
LSH OPP,2 ; Bytes
SUB OPP,OPC ; Used bytes
MERGE8: ;(T2,OPP) Enter here if no merge, just copy user to send
ADDI OPP,3 ; Round bytes up to
LSH OPP,-2 ; Option words used
SKIPE OPP ; If none, 0 is ok
ADDI OPP,<MINIHS+3>/4 ; Including header
XCT SDO(IORT) ;STOR OPP,TxPDO,(TCB) ; Set send header length
MOVE T1,MXW(IORT) ;MAXxOW ; Maximum option words
XCT XTOO(IORT) ;XMOVEI T3,TCBxO(TCB) ; To TCB image
CALL XBLTA ; Go the options
RET
;MERGED Drop option from net
; RP/ Points at Len byte
; OPT/ Len of option
; OPL/ Len-1 of option
; OPC/ Len of option
; OPP/ Points at output option byte (already copied)
; CALL MERGED
; RP/ Points at next option
; OPC/ Unchanged since none used
; OPP/ Unchanged since none used
MERGED: ADJBP OPL,RP
MOVEM OPL,RP ; Point at next
RET
;RRTCPY
;Change Record Route from net into Strict Source Route for reply.
; RP/ Points at Len byte
; OPT/ Len of option
; OPL/ Len-1 of option
; OPC/ Len of option
; OPP/ Points at output option byte (already copied)
; CALL RRTCPY
;Ret+1: Option should be dropped
;Ret+2: Option was copied and
; RP/ Points at next option
; OPC/ Count reduced if copied
; OPP/ Pointer updated if copied
RRTCPY: PUSH P,[0] ; Turn it into a (trimmed) SSR
MOVE T1,RP ; Peek ahead at
ILDB T4,T1 ; Pointer
CAIN OPT,-1(T4) ; At end? (Len vs (Ptr)-1)
JRST RRTDS2 ; Yes
MOVE T1,OPT ; Len reserved for RRT
MOVEI OPT,-1(T4) ; Len actually used
SUB T1,OPT ; Unused bytes in RRT option
MOVEM T1,(P) ; Save for RP adjustment
RRTDS2:
MOVX T1,SSROPT ; Change RRT
DPB T1,OPP ; to SRT
CALL NUSSR ; Process as Strict Source Route
JRST RRTDSX ; Have to drop it (OPL still Len-1)
POP P,T1 ; Unused bytes in RRT are
ADJBP T1,RP ; Skipped
MOVEM T1,RP ; over
AOS (P) ; All OK return
RET
RRTDSX: ADJSP P,-1 ; Clear stack of unused RRT bytes
RET ; Dropped return
;LSRCPY
;Invert Record Route or Loose Source Route from net for reply.
;SSRCPY
;Invert Record Route or Strict Source Route from net for reply.
; RP/ Points at Len byte
; OPT/ Len of option
; OPL/ Len-1 of option
; OPC/ Len of option
; OPP/ Points at output option byte (already copied)
; CALL LSRCPY or SSRCPY or NUSSR
;Ret+1: Option should be dropped
;Ret+2: Option was copied and
; RP/ Points at next option
; OPC/ Count reduced if copied
; OPP/ Pointer updated if copied
LSRCPY:
SSRCPY: ; Invert address list
MOVE T1,RP ; Peek ahead at
ILDB T4,T1 ; LSR/SSR pointer
TRNN T4,3 ; Pointer multiple of 4 and
CAIE OPT,-1(T4) ; At end? (Len vs (Ptr)-1)
RET ; No, error, drop it (shouldn't get here)
NUSSR: PUSH P,RC ; Save register for our use
PUSH P,OPP ; Pointer to (copied) option code
IDPB OPT,OPP ; Copy option length
SUB OPC,OPT ; Remaining free bytes tobe
ILDB RC,RP ; Old pointer changed to
LSH RC,-2 ; Counter of addresses
SUBI RC,1 ; (omit code,len,ptr)
MOVX OPT,4 ; Initial pointer
IDPB OPT,OPP
PUSH P,[-1] ; Marker
INVRI: MOVX T4,<-4,,0> ; Collect 4-byte addresses
PUSH P,BHC ;[0] ; here
MOVX T1,<POINT 8,(P),3> ; Point to it (right justified)
ILDB OPT,RP
IDPB OPT,T1 ; Pack
AOBJN T4,.-2
SOSLE RC
JRST INVRI ; Another address to pack
INVRO: MOVX T4,<-4,,0> ; Pack 4-byte addresses
MOVX T1,<POINT 8,(P),3> ; From top of stack (right justified)
ILDB OPT,T1
IDPB OPT,OPP ; Into send option
AOBJN T4,.-2
POP P,T1 ; Save processed address
SKIPL (P) ; Reached marker?
JRST INVRO ; No, do another
ADJSP P,-1 ; Drop marker
LOAD T4,TFH,(TCB) ; Destination must be last address in route
CAIN T1,T4 ; Same as last?
JRST NDSSR ; Yes all ok
MOVE T1,(P) ; Pointer to option code byte
MOVX OPT,LSROPT ; If adding, make into loose route
DPB OPT,T1
ILDB OPT,T1 ; Must increase length by another address
ADDI OPT,4
DPB OPT,T1
SUBI OPC,4 ; Using 4 more bytes
JUMPL OPC,NDSSR ; Overran max header length, lose
MOVEM T4,(P) ; Have to append destination address
MOVX T4,<-4,,0> ; Pack 4-byte addresses
MOVX T1,<POINT 8,(P),3> ; From top of stack (right justified)
ILDB OPT,T1
IDPB OPT,OPP ; Into send option
AOBJN T4,.-2
NDSSR: ADJSP P,-1 ; Drop pointer to option byte
ILDB OPT,RP ; Point at next received and
ILDB OPT,OPP ; Send option position
POP P,RC ; Restore register
AOS (P) ; Skip return since copied
RET
;TSPCPY
;Copy Received option if reserved space not all used.
; RP/ Points at Len byte
; OPT/ Len of option
; OPL/ Len-1 of option
; OPC/ Len of option
; OPP/ Points at output option byte (already copied)
; CALL TSPCPY
;Ret+1: Option should be dropped
;Ret+2: Option was copied and
; RP/ Points at next option
; OPC/ Count reduced if copied
; OPP/ Pointer updated if copied
TSPCPY:
MOVE T1,RP ; Peek ahead at
ILDB T4,T1 ; Pointer
CAIN OPT,-1(T4) ; At end? (Len vs (Ptr)-1)
RET ; Yes, drop it
; No, fall into copy
; Fall into copy
;SIDCPY
;Copy Received option.
; RP/ Points at Len byte
; OPT/ Len of option
; OPL/ Len-1 of option
; OPC/ Len of option
; OPP/ Points at output option byte (already copied)
; CALL SIDCPY
;Ret+1: Option should be dropped
;Ret+2: Option was copied and
; RP/ Points at next option
; OPC/ Count reduced if copied
; OPP/ Pointer updated if copied
SIDCPY: ; Copy option
SUB OPC,OPT ; Remaining free send bytes tobe
IDPB OPT,OPP ; Copy length
ILDB OPT,RP ; and rest
SOSLE OPL
JRST .-3
ILDB OPL,OPP ; Both point at start of next
AOS (P) ; Skip MERGED since copied it
RET
; IP and TCP Information Tables
ICPY==CPYOPT ; IP copy-on-fragmentation
TCPY==0 ; TCP doesn't have such a bit
DEFINE INFOW (NAM,INST)<
NAM==.-..X
INST
> ; End of INFOW
DEFINE INFO (W)<
..X=.
INFOW(CPY,<W'CPY>)
INFOW(LOF,<LOAD OPTS,T'W'OPF,(TCB)>)
INFOW(LOR,<LOAD RC,T'W'POR,(TCB)>)
INFOW(LOU,<LOAD OPP,T'W'POU,(TCB)>)
INFOW(MXW,<MAX'W'OW>)
IFE REL6,<INFOW(OTAB,<MSEC1,,W'OPNU>)>
IFN REL6,<INFOW(OTAB,<XCDSEC,,W'OPNU>)>
INFOW(POR,<POINT 8,TCB'W'R(TCB),7>)
INFOW(SDO,<STOR OPP,T'W'PDO,(TCB)>)
INFOW(SOF,<STOR OPTS,T'W'OPF,(TCB)>)
INFOW(SOR,<STOR RC,T'W'POR,(TCB)>)
INFOW(SOU,<STOR T3,T'W'POU,(TCB)>)
INFOW(XFOR,<XMOVEI T2,TCB'W'R(TCB)>)
INFOW(XFOU,<XMOVEI T2,TCB'W'U(TCB)>)
INFOW(XTOO,<XMOVEI T3,TCB'W'O(TCB)>)
INFOW(XTOR,<XMOVEI T3,TCB'W'R(TCB)>)
INFOW(XTOU,<XMOVEI T3,TCB'W'U(TCB)>)
PURGE ..X
> ; End of DEFINE INFO
IPINFO: INFO (I) ; IP Info Table
TCPINFO:INFO (T) ; TCP Info Table
; Restore registers and clean up stack
OPRES: MOVEI 11,REGS ; Saved registers
HRLZS 11 ; REGS,,0
BLT 11,11 ; Restore them
RESTORE
RET ; To R: then to caller
;SNDSCL
;Send a Secure Close Option (Internet).
;PKT/ (Extended) Packet
; CALL SNDSCL
;Ret+1: always
SNDSCL: RET
;GETTSO(PKT)
;Get the value stored in the timestamp option (TCP).
;PKT/ (Extended) Packet
;TPKT/ (Extended) TCP packet pointer
; CALL GETTSO
;Ret+1: Qlways. T1 .LT. 0 if no timestamp, or has the 32-bit timestamp
GETTSO: RET
SUBTTL Packet Printer
IFE REL6,<SWAPCD>
IFN REL6,<XSWAPCD>
COMMENT !
PRNPKT is called from the TCP and IP each time it is fondled by some
task. If the current packet is different than the one which is stored
in the PPBUF, or T1 contains an extended code PPBUF is dumped via
TCPPDP (instead of the DBGIM (JSYS) code in IMPDV), and the current
packet is stored in PPBUF. If the current packet is the same as that
in PPBUF, a record is kept regarding what has been done to it and the
state of the TCB to which it belongs so that when it is finally
dumped, the most recent information is available. This minimizes the
number of printed lines which the usermode program which actually
prints the formated script will have to print.
!
IFE IPPDSW,< ;THIS STUFF ONLY IF WE DO NOT HAVE THE PP
PPINI::
PRNPKI::
PRNPKT::
RET
> ;END OF IFE IPPDSW
IFN IPPDSW,< ;THIS STUFF ONLY IF WE SUPPORT THE PP
;PPINI
;Initialize the Packet Printer.
; CALL PPINI
;Ret+1: Always
PPINI: SAVEAC <FR,BFR>
XMOVEI BFR,PPBUF
CALL RSTPPB ; Reset the buffer
SETZM NXTLBL ; Label number for LBLOPT in packets
XMOVEI T1,PPBLCK ; Lock on buffer accesses
CALL CLRLCK ; Reset that
RET
;RSTPPB
;Reset the Packet Printer Buffer state.
;FR/ Packet Printer flag word (modified here)
;BFR/ Pointer to packet printer buffer
; CALL RSTPPB
;Ret+1: Always.
RSTPPB: MOVX FR,PP%MT ; Mark buffer as empty, clear all others
STOR FR,DFLAG,(BFR) ; Store in PPB Flag word
RET
;DMPBUF
;Dump what's in PPBUF through IMPDV.
;FR/ Packet Printer flag word
;BFR/ Pointer to packet printer buffer
; CALL DMPBUF
;Ret+1: Always
DMPBUF: STOR FR,DFLAG,(BFR) ; Update display flags before output
MOVX T1,PPBWDS ; Number of words in the buffer
HRRM T1,PPBUF ; Fake an NCP buffer header (keep code)
XMOVEI T1,PPBUF ; This looks like an NCP Packet buffer
CALL TCPPDP ; Use our routine instead of DBGIN
RET
;PRNPKI/T
;Main Routine, called from all over the IP/TCP.
;TCB/ 0 or (ext) pointer to Locked connection block (TCP only)
;PKT/ 0 or (ext) pointer to packet to print
;T1/ Number saying where the call is from and why
; MOVX T1,PT%xxx
; TDNE T1,INTTRC
; CALL PRNPKI/T
;Ret+1: Always
PRNPKI::
SAVEAC <TCB>
SETZ TCB,
CALL PRNPKT
RET
PRNPKT::
SKIPN INTTRC ; Tracing packets right now?
RET ; No.
MOVE T3,T1 ; Setup for call via LCKCAL
MOVE T4,TODCLK ; When the report is happening
XMOVEI T1,PPBLCK ; Lock to set (section 0)
XMOVEI T2,PKTPRN ; (Extended) Function to call
CALL LCKCAL ; Lock the lock and call the function
RET
;PKTPRN
;Action routine.
;TCB/ 0 or (ext) pointer to locked connection block
;PKT/ 0 or (ext) pointer to packet
;T1/ Where report is coming from (PT%xxx)
;T2/ When report is happening (milliseconds)
; Call PKTPRN
;Ret+1: Always.
PKTPRN: SAVEAC <BFR,FR>
LOCAL <WHERE,WHEN,COUNT,STATE>
XMOVEI BFR,PPBUF ; Set pointer to buffer
LOAD FR,DFLAG,(BFR) ; Get local copy of PPB flags
MOVEM T1,WHERE ; Save args in safe places
MOVEM T2,WHEN
JUMPN PKT,PKTPR1 ; Jump unless it is BG flushing buffer
TXNE FR,PP%MT ; Is the buffer empty?
JRST PKTPRX ; Yes. Nothing to do.
CALL DMPBUF ; Dump the buffer via IMPDV
CALL RSTPPB ; Reset buffer state
JRST PKTPRX ; Return
PKTPR1: TXNE FR,PP%MT ; PPB empty?
JRST PKTPR4 ; Yes. Just dump in this one
LOAD T1,PIDO,(PKT) ; Internet Data Offset
MOVE T2,PKT ; Locate TCP header
ADD T2,T1
LOAD T2,PTDO,(T2) ; TCP Data Offset
ADD T1,T2 ; Total number of Header words
CAILE T1,<PPBFSZ+LCLPKT-PKTELI> ; Beware too many options
MOVEI T1,<PPBFSZ+LCLPKT-PKTELI> ; Clamp at PPBUF limit
SOS T1 ; Skip first word
MOVEM T1,COUNT ; Number of words to compare
CAIN WHERE,8 ; Retransmitter calling?
JRST PKTPR3 ; Yes. Force printing
MOVN T1,COUNT ; Number of full header words
HRLZS T1 ; Make AOBJN pointer
XMOVEI T2,PKTELI+1(PKT) ; Beginning of corresponding part of hdr
PKTPR2: MOVE T3,0(T2) ; Get a header word from packet
CAME T3,PPBUF+PKTELI+1-LCLPKT(T1) ; Same as header in the buffer?
JRST PKTPR3 ; No. Dump the buffer
ADDI T2,1 ; Bump the packet pointer
AOBJN T1,PKTPR2 ; Loop over the buffer
JRST PKTPR4
PKTPR3: CALL DMPBUF ; Dump the buffer
CALL RSTPPB ; Reset it
PKTPR4: TXZN FR,PP%MT ; Is the buffer empty?
JRST PKTPR5 ; No. Just update state
MOVX T1,PPBFSZ-1 ; Skip first word (fake header)
XMOVEI T2,LCLPKT+1(PKT) ; Beginning of real header info(+1)
XMOVEI T3,PPBUF+1 ; Corresponding place in buffer
CALL XBLTA ; Copy the header into the buf
STOR WHEN,DTIME,(BFR) ; Save the report time
STOR PKT,DPKTP,(BFR) ; Save buffer address
PKTPR5: SKIPE STATE,TCB ; Use 0 for state if no TCB
LOAD STATE,TSTAT,(TCB) ; Else get the actual state
TXZ FR,PP%DUN
HRRZS (BFR) ; Clear prior extended trace code
CAILE WHERE,0
CAILE WHERE,8 ; Good value for where?
TXOA FR,PP%DUN ; Say we are done with this packet
XCT WHRTAB-1(WHERE)
HRLM WHERE,(BFR) ;**** ; Save extended trace code
JRST PKTPR6
WHRTAB: JRST WHR1
JRST WHR2
JRST WHR3
JRST WHR4
JRST WHR5
JRST WHR6
JRST WHR7
JRST WHR8
WHR1: TXO FR,<PP%PZ!PP%GSS!PP%SK> ; PZ output a packet
STOR STATE,DSS,(BFR) ; Store source state
JRST PKTPR6
WHR2: TXO FR,PP%GSS ; OP reporting
STOR STATE,DSS,(BFR)
WHR7: TXO FR,<PP%SNT!PP%SK> ; IP sent RESET based on input packet
JRST PKTPR6
WHR3: TXO FR,<PP%RCV!PP%GDS!PP%DK> ; IP, normal
STOR STATE,DDS,(BFR) ; Store destination state
JRST PKTPR6
WHR4: TXO FR,<PP%RA!PP%DK!PP%GDS!PP%DUN> ; RA
STOR STATE,DDS,(BFR)
JRST PKTPR6
WHR8: TXO FR,<PP%REX!PP%GSS!PP%SK> ; RX
STOR STATE,DSS,(BFR)
JRST PKTPR6
WHR6: TXO FR,PP%GDS ; IP, flushed (DUP, IGN, RST, nothing
STOR STATE,DDS,(BFR) ; to be RA'd) (have TCB)
WHR5: TXO FR,<PP%DK!PP%DUN> ; IP, flushed (checksum error, CHKADR
; failed) (no TCB)
PKTPR6:
TXNN FR,PP%DUN ; Has pkt reached the end of the line?
JRST PKTPRX ; No.
CALL DMPBUF ; Yes. Dump it now
CALL RSTPPB ; Reset the buffer
PKTPRX: STOR FR,DFLAG,(BFR) ; Save the PPB flags
RESTORE
RET
;TCPPSO
;Open file for simulation.
;TCPPSR
;Read the next simulated packet.
;TCPPSC
;Close simulation file.
;TCPPSF
;Free the simulated packets.
; Debugging and tracing utilities (used from MDDT)
; Read packets from file & insert where desired
; CALL TCPPSO$X to Open file for Simulation
; <file name>
; <SKIP> if OK
; CALL TCPPSR to Read the next Simulated packet
; <SKIP> if OK with PKT set
; CALL SNDGAT$X ,e.g. to send the packet
; CALL TCPPSC to Close the Simulation file and
; CALL TCPPSF to Free the Simulated packets
TCPPSO: CALL TCPPSC ; Open Simulation file (close old one)
MOVX T1,<GJ%OLD+GJ%FNS+GJ%SHT>
MOVX T2,<.PRIIN,,.PRIOU>
GTJFN ; Get name from TTY: (MDDT)
RET
MOVEM T1,TCPPSJ
MOVX T2,<FLD(^D36,OF%BSZ)+OF%RD>
OPENF ; Open file for reading
RET
AOS (P) ; OK return skips
RET
TCPPSC: SETZ T1, ; Close Simulation file
EXCH T1,TCPPSJ
SKIPE T1
CLOSF
JFCL
RET
TCPPSF: MOVE T1,TCPPSQ ; Free packets from Simulation Queue
JUMPE T1,TCPPSV
JN PINTL,(T1),TCPPSV
MOVE T2,PKTQ(T1)
MOVEM T2,TCPPSQ
CALL RETBLK
JRST TCPPSF
TCPPSR: MOVE T1,TCPPSJ ; Read next packet from Simulation file
BIN
ERJMP TCPPSV
HLRZ T1,T2 ; Free size
JUMPLE TCPPSV
PUSH P,T1
CALL GETBLK ; Get storage for packet
MOVEM T1,PKT
MOVN T3,(P)
POP P,(P)
JUMPLE PKT,TCPPSV
MOVE T1,TCPPSJ
MOVX T2,<POINT 36,(PKT)>
SIN ; Read packet into it
ERJMP TCPPSU
SETONE PPROG,(PKT) ; We will hang on to packet
MOVE T1,TCPPSQ ; (may want to try again)
MOVEM T1,PKTQ(PKT)
MOVEM PKT,TCPPSQ ; Place it in our queue
MOVE T1,TCPPSA
STOR T1,PIDH,(PKT) ; Fake the address
AOS (P)
RET
TCPPSU: MOVE T1,PKT ; Lose, free packet
CALL RETBLK
TCPPSV: RET
;TCPPIN
;In-core trace facility.
; IMP trace: DBGS1B+2/ JFCL
; DBGS1B+3/ JFCL
; DBGS1B+4/ MOVEM T2,(T1)
; & DBGCK1+2/ MOVEI T1,2(T2)
; DBGCK1+3/ ADDB T1,TCPPTC
; DBGCK1+4/ SUBI T1,3(T2)
; DBGCK1+5/ MOVEM T1,DBGSP
; DBGCK1+6/ AOS -1(P)
; and set DBGERR and/or DBGNCP non-zero
TCPPIN: MOVX T1,40000 ; Size of core buffer
CALL GETBLK
JUMPE T1,TCPPIX ; Lose
XMOVEI T2,<40000-2*PPBWDS>(T1) ; End, allow room for DBG
MOVEM T2,TCPPTE
MOVEM T1,TCPPTC
MOVEM T1,TCPPTB
SETZM TCPPTO
TCPPIX: RET
; Create a file of packets from some point in code (XXX:)
; Initialize trace with trace off & when done CALL TCPPWR
; xxx: CALL TCPPSS
TCPPSS:
CAIE T1,-1 ; Fill in with desired values
CAIN T1,-1 ; if filtering desired
CAIA
RET
XMOVEI T2,(PKT) ; Beginning of packet
HLRZ T1,-1(PKT) ; Free storage block length
JRST TCPPDP+2 ; Dump <N,,garb>,N<data>
TCPPDP: MOVEI T1,PPBWDS ; PPBUF size
XMOVEI T2,PPBUF ; Where from
HLLZ T3,TCPPTC
SKIPN T3 ; Enforce IF2 above
RET ; Don't allow into section zero
MOVE T3,T1 ; Be careful of TCPPTC, both
ADDB T3,TCPPTC ; TCPPDP and DBGCKS use it w/o lock
SUB T3,T1 ; Where to dump
CALL XBLTA ; Copy
CAMGE T3,TCPPTE
RET ; and return
MOVEM T3,TCPPTO ; Save overflow address and
; Fall into write routine
TCPPWR:
MOVX T1,<GJ%OLD+GJ%SHT>
HRROI T2,TCPPFN File name
GTJFN
JRST TCPPWX ; Quit
MOVX T2,<FLD(^D36,OF%BSZ)+OF%APP> ; Open for 36 bit append
OPENF
JRST TCPPWX
MOVE T4,TCPPTB ; Extended start address
MOVSI T2,(POINT 36,0(T4)) ; & pointer to it
MOVE T3,TCPPTO ; Possible end
SKIPG T3 ; If not zero
MOVE T3,TCPPTC ; If zero, use current
SUB T3,TCPPTB ; Length, w
MOVN T3,T3 ; Count
SOUT
CLOSF
JFCL
TCPPWX: MOVE T4,TCPPTB ; Extended start address
MOVEM T4,TCPPTC ; is where to start over
SETZM TCPPTO ; No overflow
RET
> ; END OF IFN IPPDSW
SUBTTL TCP Statistics Routines
IFE REL6,<SWAPCD>
IFN REL6,<XSWAPCD>
COMMENT !
WARNING -- These routines are not currently supported
These routines handle time accounting, timestamping and histogram
making.
!
IFN IPPDSW!STANSW,<
;STSINI
;Initialize Statistics.
; CALL STSINI
;Ret+1: Always
STSINI: MOVE T1,[STAT0,,STAT0+1] ; First cell to clear
SETZM STAT0 ; Clear the first word
BLT T1,STATZZ
MOVEI T1,OHUSE ; Overhead time accumulator
MOVEM T1,TIMPTR ; Select that as the timer
RET
>;IFN IPPDSW!STANSW
IFN IPPDSW,<
;TSTAMP
;Process a packet time stamp.
;T1/ (Extended) Histogram pointer
;PKT/ (Extended) Packet
; CALL TSTAMP
;Ret+1: Always.
TSTAMP: TEMP <HIST,NOW,TIMSTP>
LOAD TIMSTP,PTS,(PKT) ; Get the timestamp from packet
MOVE NOW,TODCLK
STOR NOW,PTS,(PKT) ; Set the new timestamp
SUB NOW,TIMSTP ; Compute Difference
CALL DOHIST ; Do the histogram
RESTORE
RET
;DOHIST
;Do the histogram functions.
;T1/ (Extended) Histogram pointer
;T2/ Sample
; CALL DOHIST
;Ret+1: Always
DOHIST: TEMP <HIST,SAMPLE,BINNUM>
IFN <SAMPLE+1-BINNUM>,<PRINTS ?DOHIST: ACs not properly defined>
SKIPGE BINNUM,SAMPLE ; Good sample?
MOVEI BINNUM,^D36-NHBINS ; No. Put in Garbare Bin.
JUMPL SAMPLE,DOHIS1 ; Don't accumulate bad samples
OPSTR <ADDM SAMPLE,>,HTOTL,(HIST); Accumulate total
INCR HSMPL,(HIST) ; Count samples
JFFO SAMPLE,.+2 ; Take the LOG
MOVEI BINNUM,^D36
CAIL BINNUM,^D36-NHBINS+1 ; Super big ones go in last bin
DOHIS1: SUBI BINNUM,^D36
MOVNS BINNUM
IHBIN HIST,BINNUM ; Count in that bin
RESTORE
RET
>;IFN IPPDSW
IFN IPPDSW!STANSW,< ;;; Stanford will use TIMCAL without other IPPDSW stuff
;TIMCAL
;Time a call to a subroutine.
;T1/ (Extended) Address to charge time to
;T2/ (Extended) Function to call
;T3/ Arg1 for function
;T4/ Arg2 for function
;TIMPTR/ (Extended) Pointer to current time accumulator
TIMCAL: PUSH P,TIMPTR ; Save old timer
MOVEM T1,TIMPTR ; Set new timer
PUSH P,T3 ; Save ARG1
PUSH P,T4 ; Save ARG2
PUSH P,T2 ; Save routine
IFN STANSW,<
IFE REL6,<CALL GETFRT> ; Get fork's runtime til now
IFN REL6,<CALLX (MSEC1,GETFRT)>
>;IFN STANSW
IFE STANSW,<
CALL GETFRT ; Get fork's runtime til now
>;IFE STANSW
POP P,T4 ; Get the routine address
POP P,T2 ; Get Arg2
EXCH T1,0(P) ; Save start time and get Arg1
CALL 0(T4) ; Call the function
PUSH P,T1 ; Save result of the function
IFN STANSW,<
IFE REL6,<CALL GETFRT> ; Get fork's runtime til now
IFN REL6,<CALLX (MSEC1,GETFRT)>
>;IFN STANSW
IFE STANSW,<
CALL GETFRT ; Get fork's runtime til now
>;IFE STANSW
MOVE T3,T1 ; Put in a safe place for a second
POP P,T1 ; Restore the result
POP P,T4 ; Get starting usage
SUB T4,T3 ; Compute negative usage
MOVN T3,T4 ; Positive useage
MOVE T2,TIMPTR ; Get current time accumulator
ADDM T3,0(T2) ; Charge to the current timer cell
POP P,T3 ; Restore previous timer
MOVEM T3,TIMPTR
IFE STANSW,<;;This seems to result in negative runtimes for processes!
ADDM T4,(T3) ; Avoid double charges
>;IFE STANSW
RET
> ; end of IFN IPPDSW!STANSW
SUBTTL TCP Buffer handling routines
IFE REL6,<SWAPCD>
IFN REL6,<XSWAPCD>
DEFAC (FX,Q3) ; Must agree with PROLOG, PAGEM
COMMENT !
These are routines for mapping, reading, and writing buffers. Buffers
are actually in the address space of the fork executing a SEND or
RECV, but are manipuated by the TCP fork. Data is copied only once,
directly from (or to) the buffer into a packet (or vice versa).
Since the TCP fork must guard against the page(s) containing the
buffer disappearing (unmapped, fork killed, etc), it increments the
share count on the SPT slot containing the calling fork's UPT. This
prevents the map from going away. Subsequent access checking will
discover that the page is missing and approriate errors returned.
SEND and RECV buffer headers are actually formed by the MAKBFR
routine in TCPJS. They are queued on TCBSBQ or TCBRBQ for action by
the Packetizer or Reassembler.
!
;SETTUM(BFR)
;Set TCP fork's user map to be that of the buffer This routine is
;called by the Packetizer and Reassembler (TCPUSR) to get the current
;page of a buffer mapped so it can reference the data in it.
;BFR/ (Extended) Pointer to the current buffer descriptor block.
;TCB/ (Extended) Pointer to TCB for connection.
; CALL SETTUM
;Ret+1: Always. NOSKED
SETTUM: SAVEAC <FX>
NOSKED ; Prevent user from changing access
LOAD FX,BFRKX,(BFR) ; Get the fork which owns the buffer
MOVE T1,USECTB+0 ; TCP's user section 0
MOVEM T1,TCPUS0 ; Save that for later
JE TDEC,(TCB),SETTU2 ; is this a DEC TCB?
MOVE T1,MMSPTN ; yes so get MMAPs SPT slot
JRST SETTU3 ; go map it
SETTU2: ; here to map a fork section
LOAD T1,FKUPT ; Get SPT index of page table
CALL UPSHR ; Keep it from going away
LOAD T1,FKUPT ; Get SPT index of page table
SETTU3: ; now map the section
MOVE T2,SHRPTR ; Prototype share pointer
STOR T1,SPTX,T2 ; To that SPT slot
MOVEM T2,USECTB+0 ; Place in process table
DATAI PAG,T1 ; Get current pager status (UBA)
TXZ T1,PGLACB+PGLPCS ; Be sure these control bits are off
TXO T1,PGLUBR ; Say we want to load the UBA
DATAO PAG,T1 ; Which invalidates stale info in map
JN TDEC,(TCB),R ; If DEC TCB do not set PCU
JSP T2,[XSFM T1 ; Store processor flags
TXO T1,PCU ; Previous context user bit
XJRSTF T1] ; Return with PCU set so XCTU works
RET
;USTTUM(BFR)
;Unmap user space
;BFR/ (Extended) pointer to buffer descriptor block
;NOSKED
; CALL USTTUM
;Ret+1: Always. Returns OKSKED
USTTUM: SAVEAC <FX>
MOVE T1,TCPUS0 ; The TCP's actual user secton 0
MOVEM T1,USECTB+0 ; Put back in process table
DATAI PAG,T1
TXZ T1,PGLACB+PGLPCS
TXO T1,PGLUBR
DATAO PAG,T1 ; Cause pager to look again
JN TDEC,(TCB),USTTU2 ; Do not reset PCU for DEC TCB
LOAD FX,BFRKX,(BFR) ; Get the owning fork
LOAD T1,FKUPT ; Get SPT index of that fork's map
CALL DWNSHR
JSP T2,[XSFM T1 ; Get flags
TXZ T1,PCU ; Turn off PCU bit
XJRSTF T1]
USTTU2: ; here when the maps are fixed up
OKSKED
RET
;RSTBFR(BFR)
;Reset a buffer (descriptor block)
;BFR/ (Extended) Pointer to the buffer descriptor
; CALL RSTBFR
;Ret+1: Always.
RSTBFR::
LOAD T1,BICNT,(BFR) ; Initial byte/word cnt set by SEND, etc
STOR T1,BCNT,(BFR) ; Set as the working countdown
LOAD T1,BDADR,(BFR) ; Data address in user space
STOR T1,BPTRA,(BFR) ; Set buffer byte pointer address
MOVEI T1,^D36
STOR T1,BPTRP,(BFR) ; Set position field
RET
;XFRDAT
;Transfer data between user buffer and a packet
;T1/ Source pointer (may index by TPKT)
;T2/ Dest pointer (may index by TPKT)
;T3/ Number of 8-bit bytes to transfer
;T4/ Non-0 says User-to-monitor transfer (Send direction)
;IFN STANSW,< negative means user-monitor, positive means monitr-monitr >
; CALL XFRDAT
;Ret+1: Always. T1, T2, T3 updated
;This is a cutdown version of BYTBLT which assumes 8-bit bytes and is
;able to cope with the source or destination pointers indexing by
;TPKT which is required to get extended addressing.
XFRDAT: SAVEAC <FR>
LOCAL <SRC,DEST,CNT,CNT2>
MOVE FR,T4 ; Save the Send flag
SKIPG CNT,T3 ; Move count and test for early done
JRST XFRDAZ ; Zero byte move
DMOVEM T1,SRC ; T1 to SRC and T2 to DEST
CAIG CNT,20 ; Short transfer? (must be ge 10!)
JRST XFRDA1 ; Yes
XOR T1,T2 ; Set to compare
TLC T2,(10B11) ; Flip the byte size
TLNN T1,(77B11) ; Byte sizes agree?
TLNE T2,(77B11) ; And both are 8?
CAIA ; Something is fishy
JRST XFRDA3 ; Go do it word-at-a-time
BUG.(CHK,TCPMSX,TCPTCP,SOFT,<XFRDAT: Byte size incorrect>,,<
Cause: The TCP byte copying routine was called for other than 8 bit
bytes.
>)
;Byte-at-a-time mover. Use Extended Instruction Set if present. Here
;for byte-at-a-time move when EIS not on the machine. Also used to
;finish up after other move routines.
XFRDA1:
XFRDA2:
IFN STANSW,<JUMPG FR,XFRD22> ;jump if monitor-monitor
JUMPE FR,XFRD21 ; Jump if receive direction
XFRD20: XCTBU [ ILDB T1,SRC] ; Get a source byte
IDPB T1,DEST ; Put it where it belongs
SOJG CNT,XFRD20 ; Loop til done
JRST XFRDAX ; Return to caller
XFRD21: ILDB T1,SRC
XCTBU [ IDPB T1,DEST]
SOJG CNT,XFRD21
JRST XFRDAX
IFN STANSW,<;;; monitor-monitor byte loop
XFRD22: ILDB T1,SRC
IDPB T1,DEST
SOJG CNT,XFRD22
JRST XFRDAX
>;IFN STANSW
; Word-at-a-time movers. Use BLT if no offset in positions.
XFRDA3: TLNN DEST,(7B2) ; Not up to a word boundary yet?
TLNE SRC,(1B0) ; Or SRC is a 4410XX style pointer?
CAIA ; Yes. Bump both pointers.
JRST XFRDA4 ; No
JUMPE FR,XFRD31 ; Jump if receive direction
IFN STANSW,<
JUMPL FR,XFRD32 ;jump if not monitor-monitor
ILDB T1,SRC ; No. Move a few bytes til so
IDPB T1,DEST
SOJA CNT,XFRDA3 ; Note CNT starts ge 10
XFRD32: >;IFN STANSW
XCTBU [ILDB T1,SRC] ; No. Move a few bytes til so
IDPB T1,DEST
SOJA CNT,XFRDA3 ; Note CNT starts ge 10
XFRD31: ILDB T1,SRC ; No. Move a few bytes til so
XCTBU [IDPB T1,DEST]
SOJA CNT,XFRDA3 ; Note CNT starts ge 10
XFRDA4: PUSH P,SRC ; Save pointers so left half can be
PUSH P,DEST ; restored after using as local indirect
LDB T1,[POINT 3,SRC,2] ; Position will be 04, 14, 24, or 34
TXZ SRC,-1B12 ; Clear reserved bits
TXZ DEST,-1B12
TXO SRC,IFIW ; Form local indirect pointers
TXO DEST,IFIW
IDIVI CNT,^D<36/8> ; Number of full words to move
JUMPE T1,XFRDA8 ; No offset in position. Use BLT
; Offset move
XFRDA5: ASH T1,3 ; Number of bits present in T1
MOVNI T3,-^D36(T1) ; Amount of shift required in loop
MOVNI T4,-^D32(T3) ; Number left in T2 after 1st LSH
IFE STANSW,<SKIPN FR ; Sending? >
IFN STANSW,<SKIPL FR ;Source in User space? >
SKIPA T1,@SRC ; No. Source is monitor space
UMOVE T1,@SRC ; Get 1st source word
ADDI SRC,1 ; Bump (extended) pointer
LSH T1,-4 ; Flush the extra bits
; Main move-shift loop (should be in ACs on KA10)
XFRDA6:
IFE STANSW,<SKIPN FR ; Skip if send-direction >
IFN STANSW,<SKIPL FR ; Skip if source in user space >
SKIPA T2,@SRC ; Get four more bytes
UMOVE T2,@SRC ; Get four more bytes
ADDI SRC,1 ; Bump extended indirect word
LSHC T1,0(T3) ; Fill out 32 T1 bits and left justify
ADDI DEST,1 ; Advance destination indirect word
SKIPN FR ; Skip if sending
UMOVEM T1,@DEST ; Store away
SKIPE FR ; Skip if receiving
MOVEM T1,@DEST ; Store away
LSHC T1,0(T4) ; Get rest from T2 and right just. in T1
SOJG CNT,XFRDA6 ; Loop over all full words
POP P,T2 ; Original DEST
POP P,T1 ; Original SRC
HLL SRC,T1 ; Restore position and size fields
HLL DEST,T2 ; Index and indirect bits wont change
SOJA SRC,XFRDA9 ; Undo the last increment
; No offset. SRC and DEST were 0410xx,,Y-1
XFRDA8: MOVE T1,CNT ; Get count
XMOVEI T2,@SRC ; Get source address
XMOVEI T3,@DEST ; and Destination
ADDI T2,1 ; Byte ptrs were at end of previous word
ADDI T3,1
IFN STANSW,<
JUMPLE FR,XFRD83 ; Monitor to monitor xfr?
CALL XBLTA ;do monitor-monitor xblt...
JRST XFRD82
XFRD83:
>;IFN STANSW
JUMPN FR,XFRD81 ; Jump if receiving
HRRZS T3 ; Sending. Dest is user section 0
CALL BLTMU ; Move to user
JRST XFRD82
XFRD81: HRRZS T2 ; Source is user section 0
CALL BLTUM
XFRD82: POP P,DEST ; Original DEST
POP P,SRC ; Original SRC
ADD SRC,CNT
ADD DEST,CNT ; Advance pointers
; Exit for word-at-a-time movers.
XFRDA9: SKIPE CNT,CNT2 ; Number left in partial word
JRST XFRDA2 ; Go finish them and return
; Common exit
XFRDAX: DMOVE T1,SRC ; Get updated pointers
SETZ T3, ; Return a count of 0
XFRDAZ: RESTORE
RET
;TBFINI
;Buffer initialization code. Called only at startup.
; CALL TBFINI
;Ret+1: Always.
TBFINI: RET ; Nothing to do in this version
SUBTTL TCP User Responses from TCP
IFE REL6,<SWAPCD>
IFN REL6,<XSWAPCD>
COMMENT !
Routines called from within the TCP to inform the user of various
events that have occurred such as a connection opening or closing, or
a buffer completion.
!
;USREVT(EVENT, TCB)
;Connection open or close.
;T1/ Event Code (Error Code) (377B35)
;TCB/ (Extended) Locked Connection block
; CALL USREVT
;Ret+1: Always
USREVT: LOCAL <CODE>
MOVEM T1,CODE
JN TSABT,(TCB),USREVX ; Ignore if ABORT in progress
LOAD T1,TOPNF,(TCB) ; Index of open/close wait bit index
LOAD T2,TSSYN,(TCB) ; Send state
LOAD T3,TRSYN,(TCB) ; Recv state
CAIN T2,NOTSYN ; Both NOT SYNCHRONIZED?
CAIE T3,NOTSYN
JRST USREV1
; State now NOT-NOT
CALL CLRWTB ; Yes. Clear the wait bit (now CLOSED)
JRST USREV2 ; Cannot be SYN-SYN too
USREV1:
CAIN T2,SYNCED ; Both fully synchronized?
CAIE T3,SYNCED
JRST USREV2 ; No
; State now SYN-SYN
JN TSOPN,(TCB),USREVX ; Jump if we have already said its open
SETONE TSOPN,(TCB) ; Indicate that is now true
CALL SETWTB ; Set the wait bit.
LOAD T1,TSMXP,(TCB) ; get the size the other side asked for
CALL TCPMXP ; Set buffer size (TSMXP)
USREV2:
; Any state
JN TTVT,(TCB),USREV3 ; Jump if a virtual terminal
; Here for non-TVT actions
LOAD T1,TPICX,(TCB) ; Get Status-Change channel
LOAD T2,TPIFX,(TCB) ; And FORKX to PSI
CAIE T1,77 ; No channel named
CAIN T2,-1 ; or fork went away,
EXIT USREVX ; Means no PSI
CALL PSIRQ ; Set off the PSI
JRST USREVX
; Here for TVT actions
USREV3: CAIN CODE,OK ; What kind of event is this?
JRST USREV4 ; Must be open
MOVE T1,CODE ; Must be something to do with closing
IFE REL6,<CALL TVTCLS> ; Go close the Virtual terminal
IFN REL6,<CALLX (MSEC1,TVTCLS)> ; Go close the Virtual terminal
JRST USREVX
USREV4:
IFE REL6,<CALL TVTOPN> ; Open a TCP Virtual Terminal
IFN REL6,<CALLX (MSEC1,TVTOPN)> ; Open a TCP Virtual Terminal
JUMPE T1,USREVX ; Done if TVT assigned
MOVEM T1,CODE ; Save error code (ELT+^D4)
; Failed to assign a TVT to the connection. The connection is now
; synchronized in both directions. Try to send an error message to
; the other end before we abort the connection so the user has some
; idea of why the connection is being aborted.
PUSH P,PKT ; Save these
PUSH P,TPKT
MOVX T1,4*<TVTFUE-TVTFUL> ; Message length, words
SETZ T2, ; Have a TCB
CALL TCPIPK ; Get empty packet
JRST USREV7 ; Failed, just abort connection
LOAD T1,PIPL,(PKT) ; Update packet byte length
ADDI T1,4*<TVTFUE-TVTFUL>
STOR T1,PIPL,(PKT)
MOVX T1,<TVTFUE-TVTFUL> ; Move message into packet
XMOVEI T2,TVTFUL
LOAD T3,PTDO,(TPKT)
ADD T3,TPKT
CALL XBLTA
SETONE <PEOL,PFIN>,(TPKT) ; This is the last data
LOAD T1,TSSEQ,(TCB) ; Set the sequence #
STOR T1,PSEQ,(TPKT)
ADDI T1,4*<TVTFUE-TVTFUL>+1 ; End seq # is initial + data + FIN
MODSEQ T1
STOR T1,TSSEQ,(TCB) ; Advance Send sequence
STOR T1,PESEQ,(PKT) ; Save recomputed end of packet
SETZRO PPROG,(PKT) ; Don't bother with retransmissions
MOVE T1,TODCLK ; Current millisecond
STOR T1,PTG,(PKT) ; Packet Time Generated
SETO T1, ; No TVT line block
CALL EMTPKT ; Send the packet
AOS FINSCT
; Now send a RESET to get connection closed
SETZB T1,T2 ; Have a TCB & no data
CALL TCPIPK ; Get empty packet
JRST USREV7 ; Give up if no space
LOAD T1,TSSEQ,(TCB) ; Set the sequence #
STOR T1,PSEQ,(TPKT)
STOR T1,PESEQ,(PKT) ; Save recomputed end of packet
SETONE <PRST>,(TPKT) ; Don't reply
SETZRO PPROG,(PKT) ; Don't bother with retransmissions
MOVE T1,TODCLK ; Current millisecond
STOR T1,PTG,(PKT) ; Packet Time Generated
SETO T1, ; No TVT line block
CALL EMTPKT ; Send the packet
AOS RSTSCT
USREV7:
POP P,TPKT ; Restore registers
POP P,PKT
MOVE T1,CODE ; Error code
CALL ABTCON ; Abort the connection (ABTCON/USREVT/TVTCLS)
USREVX: RESTORE
RET
TVTFUL: BYTE (8)"4","2","1"," ","N","o"," ","f","r","e","e"," "
BYTE (8)"t","e","r","m","i","n","a","l","s",15,12
TVTFUE:
;USRERR
;Indicate TCP error condition to user.
; May be called for TVTs with either error
;T1/ TCP-style error code
; EFP+^D7 RST Received
; ELP+^D9 RX timeout
;TCB/ (Extended) Locked Connection block
; CALL USRERR
;Ret+1: Always
USRERR: NOSKED
STOR T1,TERR,(TCB) ; Save the event code for user to see
JN TSABT,(TCB),USRER1 ; Forget PSI if ABORT in progress
LOAD T1,TPICE,(TCB) ; Get the error channel
LOAD T2,TPIFE,(TCB) ; Get the error FORKX
CAIE T1,77 ; No channel named
CAIN T2,-1 ; or fork went away
CAIA ; Skip the PSI
CALL PSIRQ ; Poke that fork's channel
USRER1:
LOAD T1,TERRF,(TCB) ; Index of the error flag
CALL SETWTB ; Set it to wake up waiting process(es)
OKSKED
RET
;USRURG
;Alert user that Urgent data is to be read.
;TCB/ (Extended) Locked Connection Block
; CALL USRURG
;Ret+1: Always.
USRURG: JN TSABT,(TCB),USRURX ; Forget if ABORT in progress
LOAD T1,TPICU,(TCB) ; Get the URG channel
LOAD T2,TPIFU,(TCB) ; and FORKX
CAIE T1,77 ; None named
CAIN T2,-1 ; or fork went away
EXIT USRURX ; Skip the PSI
CALL PSIRQ ; Request the PSI in that fork
USRURX: RET
;USRBFE
;User buffer empty condition (SEND, etc).
; Never called for TVTs
;T1/ TCP-style event code and flags
;TCB/ (Extended) Locked Connection Block
;BFR/ (Extended) Buffer descriptor
; CALL USRBFE
;Ret+1: Always
USRBFE:
IFN STANSW,<;;; dont modify memory maps for DEC TCBs
JE TDEC,(TCB),USRBE0 ;DEC TCB?
NOSKED ;is this necessary?
TMNE TSABT,(TCB) ; Different error if ABORT in progress
MOVX T1,<<ELP+^D14>B7> ; Connection reset
LOAD T2,BHADR,(BFR) ; Origin of the Buffer Header
LOAD T3,BCNT,(BFR) ; Get the count
MOVEM T3,BFRCNT(T2) ; Store into monitor space buffer
IFE. T3 ; Skip if whole buffer sent
LOAD T4,TSBYT,(TCB) ; Reduce outstanding count
SUB T4,T3 ; by bytes not sent
STOR T4,TSBYT,(TCB)
ENDIF.
TXO T1,TCP%DN ; Buffer done bit
MOVX T3,<-1B7+TCP%DN> ; Bits changed here
AND T1,T3 ; Flush stray bits
ANDCAM T3,BFRFLG(T2) ; Clear in monitor space buffer
IORM T1,BFRFLG(T2) ; Set to tell the user it has finished
OKSKED
JRST USRBE4
USRBE0:
>;IFN STANSW
PUSH P,T1 ; Save the code for a second
CALL SETTUM ; Make map user into our user space (NOSKED)
POP P,T1 ; Recover the code
JE TSABT,(TCB),USRBE2 ; Different error if ABORT in progress
MOVX T1,<<ELP+^D14>B7> ; Connection reset
USRBE2:
LOAD T2,BHADR,(BFR) ; Origin of the Buffer Header
LOAD T3,BCNT,(BFR) ; Get the count
UMOVEM T3,BFRCNT(T2) ; Store into user space
JUMPE T3,USRBE3 ; Skip if whole buffer sent
LOAD T4,TSBYT,(TCB) ; Reduce outstanding count
SUB T4,T3 ; by bytes not sent
STOR T4,TSBYT,(TCB)
USRBE3:
TXO T1,TCP%DN ; Buffer done bit
MOVX T3,<-1B7+TCP%DN> ; Bits changed here
AND T1,T3 ; Flush stray bits
XCTU [ANDCAM T3,BFRFLG(T2)] ; Clear in user space
XCTU [IORM T1,BFRFLG(T2)] ; Set to tell the user it has finished
CALL USTTUM ; Unmap the user space & OKSKED
IFN STANSW,<USRBE4: >
LOAD T1,TPICS,(TCB) ; Get the SEND done PSI Channel
LOAD T2,TPIFS,(TCB) ; And forkx
CALL BFRDUN ; Dispose of the buffer
RET
;USRBFF
;User buffer filled (RECV).
; Never called for TVTs
;T1/ TCP-style event code and flags (TCP%PU, TCP%UR, etc.)
;BFR/ (Extended) Buffer desciptor which is completing
;TCB/ (Extended) Locked Connection Block
; CALL USRBFF
;Ret+1: Always.
USRBFF:
IFN STANSW,<;;; Dont play with memory map on DEC TCBs
JE TDEC,(TCB),USRBF0
NOSKED
TMNE TRURG,(TCB) ; Skip if not in receive urgent mode
TXO T1,TCP%UR ; Give urgent flag in buffer
TMNE TSABT,(TCB) ; Different error if ABORT in progress
MOVX T1,<<ELP+^D14>B7> ; Connection reset
LOAD T2,BHADR,(BFR) ; Get address of header in user space
LOAD T3,BCNT,(BFR) ; Get count from monitor copy of header
MOVEM T3,BFRCNT(T2) ; Store into user copy
LOAD T4,TRBS,(TCB) ; Amount of RECV buffer space
SUB T4,T3 ; The whole buffer is going back!
; Shrinking the window is bad!!
STOR T4,TRBS,(TCB) ; Leave what is left for window setting.
TXO T1,TCP%DN ; Set the done bit
MOVX T3,<-1B7+TCP%PU+TCP%UR+TCP%DN> ; Bit we change
AND T1,T3 ; Flush stray bits
ANDCAM T3,BFRFLG(T2) ; Clear in user space
IORM T1,BFRFLG(T2) ; Merge with user's header
; Currently no options for DEC JFN connections
; MOVX T1,<.RTJST(-1,PIDO)-<MINIHS+3>/4> ; Max IP option words
; XMOVEI T2,TCBIR(TCB) ; Received IP options
; HLRZ T3,BFROPT(BFR) ; Address for IP options
; SKIPE T3 ; If none, don't return any
; CALL XBLTA ; IP options to user
; MOVX T1,<.RTJST(-1,PTDO)-<MINTHS+3>/4> ; Max TCP option words
; XMOVEI T2,TCBTR(TCB) ; Received TCP options
; HRRZ T3,BFROPT(BFR) ; Address for TCP options
; SKIPE T3 ; If none, don't return any
; CALL XBLTA ; TCP options to user
OKSKED
JRST USRBF8
USRBF0:
>;IFN STANSW
PUSH P,T1 ; Save the code
CALL SETTUM ; Map the user into our user space (NOSKED)
POP P,T1 ; Recover the code
JE TRURG,(TCB),USRBFA ; Jump if not in receive urgent mode
TXO T1,TCP%UR ; Give urgent flag in buffer
USRBFA:
JE TSABT,(TCB),USRBF2 ; Different error if ABORT in progress
MOVX T1,<<ELP+^D14>B7> ; Connection reset
USRBF2:
LOAD T2,BHADR,(BFR) ; Get address of header in user space
LOAD T3,BCNT,(BFR) ; Get count from monitor copy of header
UMOVEM T3,BFRCNT(T2) ; Store into user copy
LOAD T4,TRBS,(TCB) ; Amount of RECV buffer space
SUB T4,T3 ; The whole buffer is going back!
; Shrinking the window is bad!!
STOR T4,TRBS,(TCB) ; Leave what is left for window setting.
TXO T1,TCP%DN ; Set the done bit
MOVX T3,<-1B7+TCP%PU+TCP%UR+TCP%DN> ; Bit we change
AND T1,T3 ; Flush stray bits
XCTU [ANDCAM T3,BFRFLG(T2)] ; Clear in user space
XCTU [IORM T1,BFRFLG(T2)] ; Merge with user's header
MOVX T1,<.RTJST(-1,PIDO)-<MINIHS+3>/4> ; Max IP option words
XMOVEI T2,TCBIR(TCB) ; Received IP options
HLRZ T3,BFROPT(BFR) ; Address for IP options
SKIPE T3 ; If none, don't return any
CALL BLTMU ; IP options to user
MOVX T1,<.RTJST(-1,PTDO)-<MINTHS+3>/4> ; Max TCP option words
XMOVEI T2,TCBTR(TCB) ; Received TCP options
HRRZ T3,BFROPT(BFR) ; Address for TCP options
SKIPE T3 ; If none, don't return any
CALL BLTMU ; TCP options to user
USRBF9: CALL USTTUM ; Unmap the user space & OKSKED
IFN STANSW,<USRBF8: >
LOAD T1,TPICR,(TCB) ; Get the RECV done PSI Channel
LOAD T2,TPIFR,(TCB) ; And forkx
CALL BFRDUN ; Dispose of the buffer
RET
;USRABD
;User ABORT Done.
;TCB/ (Extended) Locked Connection Block
; CALL USRABD
;Ret+1: Always
USRABD: NOSKED
LOAD T1,TABTFX,(TCB) ; Get FORKX of ABORTer
ADJBP T1,FKABCP ; Get pointer to that fork's count
LDB T2,T1
SKIPE T2 ; Don't let counter underflow
SUBI T2,1
DPB T2,T1
OKSKED
RET
;BFRDUN
;Handle buffer done condition.
; Never called for TVTs
;T1/ PSI Channel
;T2/ FORKX to PSI
;BFR/ (Extended) Buffer
;TCB/ (Extended) Locked connection block
; CALL BFRDUN
;Ret+1: Always
BFRDUN: NOSKED
CAIE T1,77 ; No channel named?
CAIN T2,-1 ; Or fork went away?
CAIA ; Means no PSI
CALL PSIRQ ; Set off the PSI
JN TDEC,(TCB),BFRDU4 ; do not so this for DEC TCBs
LOAD T1,BFRKX,(BFR) ; Fork wherein buffer lives
HLRZ T1,FKPGS(T1) ; Get SPT index of UPT for that fork
CALL DWNSHR ; Decrement share count
BFRDU4:
JE BIDX,(BFR),BFRDU5 ; Jump if no fork will be waiting
MOVE T1,BFR ; The item to enqueue
MOVE T2,TCPBDQ ; The buffer done queue
CALL NQ ; Pick it up later
LOAD T1,BIDX,(BFR) ; Get the wait bit index
CALL SETWTB ; Make the user wake up now
OKSKED
EXIT BFRDUX
BFRDU5: OKSKED
MOVE T1,BFR ; What to release
CALL RETBLK ; Return the free storage
BUFDUX: RET
;USRINI
;Initialize the user interface.
USRINI: MOVEI T1,QSZ ; Size of a queue head
CALL GETBLK ; Get space from INTSEC
JUMPE T1,USRINX ; No room
MOVEM T1,TCPBDQ ; Save for all to find
CALL INITQ ; Initialize it
SETO T1, ; All ok
USRINX: RET
;BUFHNT
;Hunt for data for the JFN interface
;T1/ Locked TCB Address
;CALL BUFHNT
BUFHNT::
SAVEAC <TCB,BFR>
MOVE TCB,T1 ; put TCB into correct AC
SETZ T1, ; no special flags
LOAD BFR,TRCB,(TCB) ; get the receive buffer
SETZRO TRCB,(TCB) ; no more receive buffer
JUMPE BFR,R ; if no buffer return now
IFN STANSW,<
SETSEC BFR,INTSEC ; make an extended address
>;IFN STANSW
CALL USRBFF ; user buffer filled
RET ; and return to caller
TNXEND
END