Trailing-Edge
-
PDP-10 Archives
-
TOPS-20_V6.1_DECnetSrc_7-23-85
-
mcb/nsp/nsinfo.req
There is 1 other file named nsinfo.req in the archive. Click here to see a list.
! COPYRIGHT (c) 1980, 1981, 1982
! DIGITAL EQUIPMENT CORPORATION
! Maynard, Massachusetts
!
! This software is furnished under a license and may be used
! and copied only in accordance with the terms of such license
! and with the inclusion of the above copyright notice. This
! software or any other copies thereof may not be provided or
! otherwise made available to any other person. No title to
! and ownership of the software is hereby transferred.
!
! The information in this software is subject to change
! without notice and should not be construed as a commitment
! by DIGITAL EQUIPMENT CORPORATION.
!
! DIGITAL assumes no responsibility for the use or reliability
! of its software on equipment which is not supplied by
! DIGITAL.
!+
! Network Services Layer values of general interest
!
!-
!+
! Function modifier codes for the Session Control Interface
!-
literal
N_GSTS = 0, ! STATUS of NSP
N_POPN = 2, ! OPEN port
N_PCLS = 4, ! CLOSE port
N_GSTA = 6, ! STATE of port
N_XCON = 8, ! CONNECT-TRANSMIT
N_XACC = 10, ! ACCEPT connection
N_XREJ = 12, ! REJECT connection
N_XDSC = 14, ! DISCONNECT link
N_XABT = 16, ! ABORT link
N_XDAT = 18, ! DATA-TRANSMIT
N_XINT = 20, ! INTERRUPT-TRANSMIT
N_XIRQ = 22, ! INTERRUPT-REQUEST
N_XDRQ = 24, ! DATA-REQUEST
N_XBUF = 26, ! DATA-RECEIVE
N_XINI = 28,
N_SCNF = 0, ! CONFIDENCE
N_SCNS = 2, ! CONNECT-STATUS
N_RCON = 4, ! CONNECT-RECEIVED
N_RDSC = 6, ! DISCONNECT-RECEIVED
N_RDAT = 8, ! DATA-RECEIVED
N_RINT = 10, ! INTERRUPT-RECEIVED
N_XHI = N_XINI,
N_RHI = N_RINT;
!+
! Status codes for Session Control Interface
!-
literal
N$HI = 3, ! max ststus code value
N$SREJ = 3, ! Connect rejected
N$SACC = 2, ! Connect accepted
N$SSUC = 1, ! Successful completion
N$ERES = -1, ! Insufficient resources
N$ECON = -2, ! Network probably not connected
N$ESTE = -3, ! Wrong state for operation
N$EOPN = -4, ! No resources at remote node
N$EABO = -5, ! Link aborted/remote port closed
N$EABR = -5, ! Link aborted/remote port closed
N$ETMI = -6, ! Too many interrupt messages outstanding
N$ERMO = -7, ! Invalid read mode for this link
N$ELST = -8, ! Data lost-receive buffer too small
N$EMTL = -9, ! Message too long
N$ECLS = -10, ! Local port has been closed
N$ENUR = -11, ! Destination is unreachbable
N$EABL = -12, ! Abort by local user
N$ERUN = -13, ! NSP already initilized
N$ETRN = -14, ! Open rejected by Transport
N$LO = -14; ! minimum status value
!+
! Parameter values passed from Session Control in C_PRMx of CCB
!-
literal
N$FSEG = %O'1', ! Segment flow control
N$FMES = %O'2', ! Message flow control
N$FEOM = %O'1', ! End of message flag
N$FBOM = %O'2', ! Begin of message flag
N$FCMP = %O'4'; ! Post completion flag
!+
! Port state codes returned in a STATE call
!-
literal
N$SO = 1, ! OPEN
N$SCR = 2, ! CONNECT-RECEIVED
N$SDR = 3, ! DISCONNECT-RECEIVED
N$SDRC = 4, ! DISCONNECT-REJECT-COMPLETE
N$SCC = 5, ! CONNECT-CONFIRM
N$SCI = 6, ! CONNECT-INITIATE
N$SNR = 7, ! NO-RESOURCES
N$SNC = 8, ! NO-COMMUNICATION
N$SCD = 9, ! CONNECT-DELIVERED
N$SRJ = 10, ! REJECTED
N$SRUN = 11, ! RUN
N$SDI = 12, ! DISCONNECT-INITIATE
N$SDIC = 13, ! DISCONNECT-INITIATE-COMPLETE
N$SDN = 14, ! DISCONNECT-NOTIFICATION
N$SCL = 15, ! CLOSED
N$SCN = 16; ! CLOSED-NOTIFICATION